Mercurial > emacs

--- a/ChangeLog	Thu Jul 31 02:47:32 2008 +0000
+++ b/ChangeLog	Thu Jul 31 05:33:56 2008 +0000
@@ -1,3 +1,9 @@
+2008-07-31  Dan Nicolaescu  <dann@ics.uci.edu>
+
+	* make-dist:
+	* README: Remove VMS support.
+	* vms: Remove directory.
+
 2008-07-31  Dan Nicolaescu  <dann@ics.uci.edu>

 	* configure.in (MULTI_KBOARD): Remove.
--- a/README	Thu Jul 31 02:47:32 2008 +0000
+++ b/README	Thu Jul 31 05:33:56 2008 +0000
@@ -81,7 +81,6 @@
 `doc/lispintro' holds the source code for the Introduction to Programming
                 in Emacs Lisp manual.
 `msdos'     holds configuration files for compiling Emacs under MSDOG.
-`vms'       holds instructions and useful files for running Emacs under VMS.
 `nt'        holds various command files and documentation files that pertain
             to building and running Emacs on Windows 9X/ME/NT/2000/XP.
 `test'      holds tests for various aspects of Emacs's functionality.
--- a/admin/CPP-DEFINES	Thu Jul 31 02:47:32 2008 +0000
+++ b/admin/CPP-DEFINES	Thu Jul 31 05:33:56 2008 +0000
@@ -220,7 +220,6 @@
 LIB_MOTIF
 LIB_STANDARD
 LINKER
-LINK_CRTL_SHARE
 LINUX_VERSION_CODE
 LISP_FLOAT_TYPE
 LNOFLSH
@@ -232,7 +231,6 @@
 MAIL_USE_POP
 MAIL_USE_SYSTEM_LOCK
 MAXPATHLEN
-MAX_PRINT_CHARS
 MIN_PTY_KERNEL_VERSION -- only used on Mac
 MODE_LINE_BINARY_TEXT
 MUST_UNDEF__STDC__
@@ -243,13 +241,11 @@
 NEED_UNISTD_H
 NLIST_STRUCT
 NOMULTIPLEJOBS
-NONSYSTEM_DIR_LIBRARY
 NOT_C_CODE
 NOT_USING_MOTIF
 NO_ABORT
 NO_ARG_ARRAY
 NO_EDITRES
-NO_HYPHENS_IN_FILENAMES
 NO_MATHERR
 NO_REMAP
 NO_SHARED_LIBS
@@ -287,7 +283,6 @@
 SEPCHAR
 SETPGRP_RELEASES_CTTY
 SETUP_SLAVE_PTY
-SHARABLE_LIB_BUG
 SIGALRM
 SIGCHLD
 SIGHUP
@@ -331,7 +326,6 @@
 USG_SUBTTY_WORKS
 VALBITS
 VIRT_ADDR_VARIES
-VMS
 WORDS_BIG_ENDIAN
 WRETCODE
 XINT
--- a/admin/MAINTAINERS	Thu Jul 31 02:47:32 2008 +0000
+++ b/admin/MAINTAINERS	Thu Jul 31 05:33:56 2008 +0000
@@ -116,9 +116,6 @@
 	src/editfns.c
 	lisp/textmodes/refill.el

-Thien-Thi Nguyen
-	VMS
-
 ==============================================================================
 3.
 ==============================================================================
--- a/admin/notes/cpp	Thu Jul 31 02:47:32 2008 +0000
+++ b/admin/notes/cpp	Thu Jul 31 05:33:56 2008 +0000
@@ -7,9 +7,7 @@
 	lib-src/Makefile

 (delimited by comment "start of cpp stuff").  some cpp implementations
-insert whitespace in between tokens, which explains the "$(dot)$(dot)"
-and "UNEXEC_ALIAS" workarounds for unixoid systems and the bundled
-tradcpp/ for vms.  [NOTE: tradcpp/ not yet checked in.]
+insert whitespace in between tokens.

 during makefile creation, the preprocessor symbol NOT_C_CODE is defined.
 this should not be defined for normal .c file compilation.
--- a/doc/emacs/ChangeLog	Thu Jul 31 02:47:32 2008 +0000
+++ b/doc/emacs/ChangeLog	Thu Jul 31 05:33:56 2008 +0000
@@ -1,3 +1,7 @@
+2008-07-31  Dan Nicolaescu  <dann@ics.uci.edu>
+
+	* emacs.texi: Remove VMS support.
+
 2008-07-30  Dan Nicolaescu  <dann@ics.uci.edu>

 	* vc1-xtra.texi (VC Directory Mode): Update the display format and fix
--- a/doc/emacs/emacs.texi	Thu Jul 31 02:47:32 2008 +0000
+++ b/doc/emacs/emacs.texi	Thu Jul 31 05:33:56 2008 +0000
@@ -1056,13 +1056,12 @@
 @url{ftp://publications.ai.mit.edu/ai-publications/pdf/AIM-519A.pdf}.

 This edition of the manual is intended for use with GNU Emacs
-installed on GNU and Unix systems.  GNU Emacs can also be used on VMS,
+installed on GNU and Unix systems.  GNU Emacs can also be used on
 MS-DOS (also called MS-DOG), Microsoft Windows, and Macintosh systems.
-Those systems use different file name syntax; in addition, VMS and
-MS-DOS do not support all GNU Emacs features.  @xref{Microsoft
+Those systems use different file name syntax; in addition
+MS-DOS does not support all GNU Emacs features.  @xref{Microsoft
 Windows}, for information about using Emacs on Windows.
-@xref{Mac OS}, for information about using Emacs on Macintosh.  We
-don't try to describe VMS usage in this manual.
+@xref{Mac OS}, for information about using Emacs on Macintosh.
 @end iftex

 @node Distrib, Intro, Top, Top
--- a/doc/lispref/ChangeLog	Thu Jul 31 02:47:32 2008 +0000
+++ b/doc/lispref/ChangeLog	Thu Jul 31 05:33:56 2008 +0000
@@ -1,3 +1,9 @@
+2008-07-31  Dan Nicolaescu  <dann@ics.uci.edu>
+
+	* os.texi:
+	* intro.texi:
+	* files.texi: Remove VMS support.
+
 2008-07-27  Dan Nicolaescu  <dann@ics.uci.edu>

 	* os.texi:
--- a/doc/lispref/files.texi	Thu Jul 31 02:47:32 2008 +0000
+++ b/doc/lispref/files.texi	Thu Jul 31 05:33:56 2008 +0000
@@ -1487,11 +1487,6 @@
 See also @code{delete-directory} in @ref{Create/Delete Dirs}.
 @end deffn

-@defun define-logical-name varname string
-This function defines the logical name @var{varname} to have the value
-@var{string}.  It is available only on VMS.
-@end defun
-
 @defun set-file-modes filename mode
 This function sets mode bits of @var{filename} to @var{mode} (which
 must be an integer).  Only the low 12 bits of @var{mode} are used.
@@ -1565,10 +1560,9 @@
   On MS-DOS and MS-Windows, these functions (like the function that
 actually operate on files) accept MS-DOS or MS-Windows file-name syntax,
 where backslashes separate the components, as well as Unix syntax; but
-they always return Unix syntax.  On VMS, these functions (and the ones
-that operate on files) understand both VMS file-name syntax and Unix
-syntax.  This enables Lisp programs to specify file names in Unix syntax
-and work properly on all systems without change.
+they always return Unix syntax.  This enables Lisp programs to specify
+file names in Unix syntax and work properly on all systems without
+change.

 @menu
 * File Name Components::  The directory part of a file name, and the rest.
@@ -1597,15 +1591,11 @@

   On most systems, the directory part is everything up to and including
 the last slash (backslash is also allowed in input on MS-DOS or
-MS-Windows); the nondirectory part is the rest.  The rules in VMS syntax
-are complicated.
+MS-Windows); the nondirectory part is the rest.

   For some purposes, the nondirectory part is further subdivided into
 the name proper and the @dfn{version number}.  On most systems, only
-backup files have version numbers in their names.  On VMS, every file
-has a version number, but most of the time the file name actually used
-in Emacs omits the version number, so that version numbers in Emacs are
-found mostly in directory lists.
+backup files have version numbers in their names.

 @defun file-name-directory filename
 This function returns the directory part of @var{filename}, as a
@@ -1613,9 +1603,7 @@
 @var{filename} does not include a directory part.

 On GNU and Unix systems, a string returned by this function always
-ends in a slash.  On MS-DOS it can also end in a colon.  On VMS, it
-returns a string ending in one of the three characters @samp{:},
-@samp{]}, or @samp{>}.
+ends in a slash.  On MS-DOS it can also end in a colon.

 @example
 @group
@@ -1626,10 +1614,6 @@
 (file-name-directory "foo")        ; @r{Unix example}
      @result{} nil
 @end group
-@group
-(file-name-directory "[X]FOO.TMP") ; @r{VMS example}
-     @result{} "[X]"
-@end group
 @end example
 @end defun

@@ -1649,11 +1633,6 @@
 (file-name-nondirectory "lewis/")
      @result{} ""
 @end group
-@group
-;; @r{The following example is accurate only on VMS.}
-(file-name-nondirectory "[X]FOO.TMP")
-     @result{} "FOO.TMP"
-@end group
 @end example
 @end defun

@@ -1678,11 +1657,6 @@
 (file-name-sans-versions "~rms/foo")
      @result{} "~rms/foo"
 @end group
-@group
-;; @r{The following example applies to VMS only.}
-(file-name-sans-versions "foo;23")
-     @result{} "foo"
-@end group
 @end example
 @end defun

@@ -1758,12 +1732,11 @@
 or a tilde (@samp{~}), and a relative one does not.  On MS-DOS and
 MS-Windows, an absolute file name starts with a slash or a backslash, or
 with a drive specification @samp{@var{x}:/}, where @var{x} is the
-@dfn{drive letter}.  The rules on VMS are complicated.
+@dfn{drive letter}.

 @defun file-name-absolute-p filename
 This function returns @code{t} if file @var{filename} is an absolute
-file name, @code{nil} otherwise.  On VMS, this function understands both
-Unix syntax and VMS syntax.
+file name, @code{nil} otherwise.

 @example
 @group
@@ -1819,8 +1792,8 @@
 same as the usual Unix terminology.)  These two different names for
 the same entity are related by a syntactic transformation.  On GNU and
 Unix systems, this is simple: a directory name ends in a slash,
-whereas the directory's name as a file lacks that slash.  On MS-DOS and
-VMS, the relationship is more complicated.
+whereas the directory's name as a file lacks that slash.  On MS-DOS
+the relationship is more complicated.

   The difference between a directory name and its name as a file is
 subtle but crucial.  When an Emacs variable or function argument is
@@ -1836,8 +1809,7 @@
 This function returns a string representing @var{filename} in a form
 that the operating system will interpret as the name of a directory.  On
 most systems, this means appending a slash to the string (if it does not
-already end in one).  On VMS, the function converts a string of the form
-@file{[X]Y.DIR.1} to the form @file{[X.Y]}.
+already end in one).

 @example
 @group
@@ -1851,8 +1823,7 @@
 This function returns a string representing @var{dirname} in a form that
 the operating system will interpret as the name of a file.  On most
 systems, this means removing the final slash (or backslash) from the
-string.  On VMS, the function converts a string of the form @file{[X.Y]}
-to @file{[X]Y.DIR.1}.
+string.

 @example
 @group
@@ -2037,7 +2008,7 @@
 @code{expand-file-name} uses the default directory when its second
 argument is @code{nil}.

-Aside from VMS, the value is always a string ending with a slash.
+The value is always a string ending with a slash.

 @example
 @group
@@ -2097,8 +2068,6 @@
 @end group
 @end example

-On VMS, @samp{$} substitution is not done, so this function does nothing
-on VMS except discard superfluous initial components as shown above.
 @end defun

 @node Unique File Names
@@ -2417,11 +2386,6 @@
 of file-attributes}).
 @end defun

-@defun file-name-all-versions file dirname
-This function returns a list of all versions of the file named
-@var{file} in directory @var{dirname}.  It is only available on VMS.
-@end defun
-
 @defun file-expand-wildcards pattern &optional full
 This function expands the wildcard pattern @var{pattern}, returning
 a list of file names that match it.
--- a/doc/lispref/intro.texi	Thu Jul 31 02:47:32 2008 +0000
+++ b/doc/lispref/intro.texi	Thu Jul 31 05:33:56 2008 +0000
@@ -55,7 +55,7 @@
 because we consider them secondary (such as most of the individual
 modes) or because they are yet to be written.  Because we are not able
 to deal with them completely, we have left out several parts
-intentionally.  This includes most information about usage on VMS.
+intentionally.

   The manual should be fully correct in what it does cover, and it is
 therefore open to criticism on anything it says---from specific examples
--- a/doc/lispref/os.texi	Thu Jul 31 02:47:32 2008 +0000
+++ b/doc/lispref/os.texi	Thu Jul 31 05:33:56 2008 +0000
@@ -632,10 +632,6 @@
 The value of this variable is a symbol indicating the type of operating
 system Emacs is operating on.  Here is a table of the possible values:

-@table @code
-@item alpha-vms
-VMS on the Alpha.
-
 @item aix-v3
 AIX.

@@ -667,9 +663,6 @@
 @item usg-unix-v
 AT&T System V.

-@item vax-vms
-VAX VMS.
-
 @item windows-nt
 Microsoft windows NT.  The same executable supports Windows 9X, but the
 value of @code{system-type} is @code{windows-nt} in either case.
@@ -862,19 +855,6 @@
 The value is @code{nil} if Emacs is running under a window system.
 @end defvar

-@defun setprv privilege-name &optional setp getprv
-This function sets or resets a VMS privilege.  (It does not exist on
-other systems.)  The first argument is the privilege name, as a string.
-The second argument, @var{setp}, is @code{t} or @code{nil}, indicating
-whether the privilege is to be turned on or off.  Its default is
-@code{nil}.  The function returns @code{t} if successful, @code{nil}
-otherwise.
-
-If the third argument, @var{getprv}, is non-@code{nil}, @code{setprv}
-does not change the privilege, but returns @code{t} or @code{nil}
-indicating whether the privilege is currently enabled.
-@end defun
-
 @node User Identification
 @section User Identification
 @cindex user identification
--- a/doc/misc/ChangeLog	Thu Jul 31 02:47:32 2008 +0000
+++ b/doc/misc/ChangeLog	Thu Jul 31 05:33:56 2008 +0000
@@ -1,3 +1,7 @@
+2008-07-31  Dan Nicolaescu  <dann@ics.uci.edu>
+
+	* ediff.texi: Remove VMS support.
+
 2008-07-29  Juanma Barranquero  <lekktu@gmail.com>

 	* makefile.w32-in (INFO_TARGETS, DVI_TARGETS, clean): Add mairix-el.
--- a/doc/misc/ediff.texi	Thu Jul 31 02:47:32 2008 +0000
+++ b/doc/misc/ediff.texi	Thu Jul 31 05:33:56 2008 +0000
@@ -1152,7 +1152,7 @@
 Regular files are treated by the @code{patch} utility in the usual manner,
 i.e., the original is renamed into @file{source-name.orig} and the result
 of the patch is placed into the file source-name (@file{_orig} is used
-on systems like VMS, DOS, etc.)
+on systems like DOS, etc.)

 @node Customization, Credits, Remote and Compressed Files, Top
 @chapter Customization
--- a/etc/ChangeLog	Thu Jul 31 02:47:32 2008 +0000
+++ b/etc/ChangeLog	Thu Jul 31 05:33:56 2008 +0000
@@ -1,3 +1,10 @@
+2008-07-31  Dan Nicolaescu  <dann@ics.uci.edu>
+
+	* termcap.src: Remove file.
+	* README:
+	* PROBLEMS:
+	* MACHINES: Remove VMS info.
+
 2008-07-27  Dan Nicolaescu  <dann@ics.uci.edu>

 	* PROBLEMS:
--- a/etc/MACHINES	Thu Jul 31 02:47:32 2008 +0000
+++ b/etc/MACHINES	Thu Jul 31 05:33:56 2008 +0000
@@ -437,16 +437,9 @@

     chmod 2755 etc/movemail; chgrp mail etc/movemail

-Vaxen running Berkeley Unix (vax-dec-bsd4.1, vax-dec-bsd4.2, vax-dec-bsd4.3),
-              VMS (vax-dec-vms)
+Vaxen running Berkeley Unix (vax-dec-bsd4.1, vax-dec-bsd4.2, vax-dec-bsd4.3)

   Works.
-
-  Richard Levitte <levitte@e.kth.se> distributes a set of patches to
-  Emacs 18.59 to make it work nicely under VMS.  Emacs 19 probably
-  won't work very well, or even compile.  Levitte is working on a
-  port, so these problems should be fixed in the near future.
-

 Here are notes about some of the systems supported:

@@ -515,17 +508,6 @@
   #undef HAVE_SOCKETS in config.h, after the inclusion of s-usg5-4.h.
   (Any system that supports Internet should implement sockets.)

-VMS (vmsM.N)
-
-  Richard Levitte <levitte@e.kth.se> distributes a set of patches to
-  Emacs 18.59 to make it work nicely under VMS.  Emacs 19 probably
-  won't work very well, or even compile.  Levitte is working on a
-  port, so these problems should be fixed in the near future.
-
-  Note that Emacs for VMS is usually distributed in a special VMS
-  distribution.  See the file ../vms/VMSINSTALL for info on moving
-  Unix distributions to VMS, and other VMS-related topics.
-
 Windows NT/95/98/ME/2000

   For installation on all versions of the MS-Windows platform, see the
@@ -630,6 +612,7 @@
   System V rel 2.2 -- usg5.2.2
   System V rel 3 -- usg5.3
   Ultrix -- bsd4.3
+  VMS (s/vms.h)


 Local variables:
--- a/etc/PROBLEMS	Thu Jul 31 02:47:32 2008 +0000
+++ b/etc/PROBLEMS	Thu Jul 31 05:33:56 2008 +0000
@@ -2672,7 +2672,7 @@
 *** Fatal signal in the command  temacs -l loadup inc dump.

 This command is the final stage of building Emacs.  It is run by the
-Makefile in the src subdirectory, or by build.com on VMS.
+Makefile in the src subdirectory.

 It has been known to get fatal errors due to insufficient swapping
 space available on the machine.
@@ -3643,25 +3643,6 @@

 This seems to be due to a GCC bug; it is fixed in GCC 2.8.1.

-** VMS: Compilation errors on VMS.
-
-You will get warnings when compiling on VMS because there are
-variable names longer than 32 (or whatever it is) characters.
-This is not an error.  Ignore it.
-
-VAX C does not support #if defined(foo).  Uses of this construct
-were removed, but some may have crept back in.  They must be rewritten.
-
-There is a bug in the C compiler which fails to sign extend characters
-in conditional expressions.  The bug is:
-	char c = -1, d = 1;
-	int i;
-
-	i = d ? c : d;
-The result is i == 255;  the fix is to typecast the char in the
-conditional expression as an (int).  Known occurrences of such
-constructs in Emacs have been fixed.
-
 ** Vax C compiler bugs affecting Emacs.

 You may get one of these problems compiling Emacs:
--- a/etc/README	Thu Jul 31 02:47:32 2008 +0000
+++ b/etc/README	Thu Jul 31 05:33:56 2008 +0000
@@ -5,10 +5,6 @@

 `forms-d2.dat' is an example data file used by forms-d2.el.

-`termcap.src' is included mainly for VMS.  It is a copy of the
-`/etc/termcap' file used on Unix.
-
-
 COPYRIGHT AND LICENSE INFORMATION FOR IMAGE FILES

 File: emacs.icon
--- a/etc/termcap.src	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,17734 +0,0 @@
-######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
-#
-# This version of terminfo.src is distributed with ncurses.
-# Report bugs and new terminal descriptions to
-#	bug-ncurses@gnu.org
-#
-# The original header is preserved below for reference.  It is noted that there
-# is a newer version which differs in some cosmetic details; we have decided
-# to not change the header unless there is also a change in content.
-#
-#------------------------------------------------------------------------------
-#	Version 10.2.1
-#	terminfo syntax
-#
-#	Eric S. Raymond		(current maintainer)
-#	John Kunze, Berkeley
-#	Craig Leres, Berkeley
-#
-# Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
-# address is no longer valid.  The latest version can always be found at
-# <http://catb.org/esr/terminfo/termtypes.ti.gz>.
-#
-# PURPOSE OF THIS FILE:
-#
-# This file describes the capabilities of various character-cell terminals,
-# as needed by software such as screen-oriented editors.
-#
-# Other terminfo and termcap files exist, supported by various OS vendors
-# or as relics of various older versions of UNIX.  This one is the longest
-# and most comprehensive one in existence.  It subsumes not only the entirety
-# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
-# termcap file, but also large numbers of vendor-maintained termcap and
-# terminfo entries more complete and carefully tested than those in historical
-# termcap/terminfo versions.
-#
-# Pointers to related resources (including the ncurses distribution) may
-# be found at <http://catb.org/esr/terminfo/termtypes.ti.gz>.
-#
-# INTERNATIONALIZATION:
-#
-# This file uses only the US-ASCII character set (no ISO8859 characters).
-#
-# This file assumes a US-ASCII character set. If you need to fix this, start
-# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
-# for your character set.  \E(A and \E)A enables the British character set
-# with the pound sign at position 2/3.
-#
-# In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
-# C1 characters are considered the first-byte set of the Japanese encodings,
-# so \E)0 should be avoided in <enacs> and initialization strings.
-#
-# FILE FORMAT:
-#
-# The version you are looking at may be in any of three formats: master
-# (terminfo with OT capabilities), stock terminfo, or termcap.  You can tell
-# which by the format given in the header above.
-#
-# The master format is accepted and generated by the terminfo tools in the
-# ncurses suite; it differs from stock (System V-compatible) terminfo only
-# in that it admits a group of capabilities (prefixed `OT') equivalent to
-# various obsolete termcap capabilities.  You can, thus, convert from master
-# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
-# you have ncurses `tic -I' is nicer (among other things, it automatically
-# outputs entries in a canonical form).
-#
-# The termcap version is generated automatically from the master version
-# using tic -C.  This filtering leaves in the OT capabilities under their
-# original termcap names.  All translated entries fit within the 1023-byte
-# string-table limit of archaic termcap libraries except where explicitly
-# noted below.  Note that the termcap translation assumes that your termcap
-# library can handle multiple tc capabilities in an entry. 4.4BSD has this
-# capability.  Older versions of GNU termcap, through 1.3, do not.
-#
-# For details on these formats, see terminfo(5) in the ncurses distribution,
-# and termcap(5) in the 4.4BSD Unix Programmer's Manual.  Be aware that 4.4BSD
-# curses has been declared obsolete by the caretakers of the 4.4BSD sources
-# as of June 1995; they are encouraging everyone to migrate to ncurses.
-#
-# Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
-# no entry in this file has embedded comments.  This is so source translation
-# to termcap only has to carry over leading comments.  Also, no name field
-# contains embedded whitespace (such whitespace confuses rdist).
-#
-# Further note: older versions of this file were often installed with an editor
-# script (reorder) that moved the most common terminal types to the front of
-# the file.  This should no longer be necessary, as the file is now ordered
-# roughly by type frequency with ANSI/VT100 and other common types up front.
-#
-# Some information has been merged in from terminfo files distributed by
-# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below).  Much information
-# comes from vendors who maintain official terminfos for their hardware
-# (notably DEC and Wyse).
-#
-# A detailed change history is included at the end of this file.
-#
-# FILE ORGANIZATION:
-#
-# Comments in this file begin with # - they cannot appear in the middle
-# of a terminfo/termcap entry (this feature had to be sacrificed in order
-# to allow standard terminfo and termcap syntax to be generated cleanly from
-# the master format).  Individual capabilities are commented out by
-# placing a period between the colon and the capability name.
-#
-# The file is divided up into major sections (headed by lines beginning with
-# the string "########") and minor sections (beginning with "####"); do
-#
-#	grep "^####" <file> | more
-#
-# to see a listing of section headings.  The intent of the divisions is
-# (a) to make it easier to find things, and (b) to order the database so
-# that important and frequently-encountered terminal types are near the
-# front (so that you'll get reasonable search efficiency from a linear
-# search of the termcap form even if you don't use reorder).  Minor sections
-# usually correspond to manufacturers or standard terminal classes.
-# Parenthesized words following manufacturer names are type prefixes or
-# product line names used by that manufacturers.
-#
-# HOW TO READ THE ENTRIES:
-#
-# The first name in an entry is the canonical name for the model or
-# type, last entry is a verbose description.  Others are mnemonic synonyms for
-# the terminal.
-#
-# Terminal names look like <manufacturer> <model> - <modes/options>
-# The part to the left of the dash, if a dash is present, describes the
-# particular hardware of the terminal.  The part to the right may be used
-# for flags indicating special ROMs, extra memory, particular terminal modes,
-# or user preferences.
-#
-# All names should be in lower case, for consistency in typing.
-#
-# The following are conventionally used suffixes:
-#	-2p	Has two pages of memory.  Likewise 4p, 8p, etc.
-#	-am	Enable auto-margin.
-#	-m	Monochrome.  Suppress color support
-#	-mc	Magic-cookie.  Some terminals (notably older Wyses) can
-#		only support one attribute without magic-cookie lossage.
-#		Their base entry is usually paired with another that
-#		uses magic cookies to support multiple attributes.
-#	-nam	No auto-margin - suppress :am: capability
-#	-nl	No labels - suppress soft labels
-#	-ns	No status line - suppress status line
-#	-rv	Terminal in reverse video mode (black on white)
-#	-s	Enable status line.
-#	-vb	Use visible bell (:vb:) rather than :bl:.
-#	-w	Wide - in 132 column mode.
-# If a name has multiple suffixes and one is a line height, that one should
-# go first.  Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
-#
-# Entries with embedded plus signs are designed to be included through use/tc
-# capabilities, not used as standalone entries.
-#
-# To avoid search clashes, some older all-numeric names for terminals have
-# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
-# All primary names of terminals now have alphanumeric prefixes.
-#
-# Comments marked "esr" are mostly results of applying the termcap-compiler
-# code packaged with ncurses and contemplating the resulting error messages.
-# In many cases, these indicated obvious fixes to syntax garbled by the
-# composers.  In a few cases, I was able to deduce corrected forms for garbled
-# capabilities by looking at context.  All the information in the original
-# entries is preserved in the comments.
-#
-# In the comments, terminfo capability names are bracketed with <> (angle
-# brackets).  Termcap capability names are bracketed with :: (colons).
-#
-# INTERPRETATION OF USER CAPABILITIES
-#
-# The System V Release 4 and XPG4 terminfo format defines ten string
-# capabilities for use by applications, <u0>...<u9>.   In this file, we use
-# certain of these capabilities to describe functions which are not covered
-# by terminfo.  The mapping is as follows:
-#
-#	u9	terminal enquire string (equiv. to ANSI/ECMA-48 DA)
-#	u8	terminal answerback description
-#	u7	cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
-#	u6	cursor position report (equiv. to ANSI/ECMA-48 CPR)
-#
-# The terminal enquire string <u9> should elicit an answerback response
-# from the terminal.  Common values for <u9> will be ^E (on older ASCII
-# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
-#
-# The cursor position request (<u7>) string should elicit a cursor position
-# report.  A typical value (for VT100 terminals) is \E[6n.
-#
-# The terminal answerback description (u8) must consist of an expected
-# answerback string.  The string may contain the following scanf(3)-like
-# escapes:
-#
-#	%c	Accept any character
-#	%[...]	Accept any number of characters in the given set
-#
-# The cursor position report (<u6>) string must contain two scanf(3)-style
-# %d format elements.  The first of these must correspond to the Y coordinate
-# and the second to the %d.  If the string contains the sequence %i, it is
-# taken as an instruction to decrement each value after reading it (this is
-# the inverse sense from the cup string).  The typical CPR value is
-# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
-#
-# These capabilities are used by tack(1m), the terminfo action checker
-# (distributed with ncurses 5.0).
-#
-# TABSET FILES
-#
-# All the entries in this file have been edited to assume that the tabset
-# files directory is /usr/share/tabset, in conformance with the File Hierarchy
-# Standard for Linux and open-source BSD systems.  Some vendors (notably Sun)
-# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
-#
-# No curses package we know of actually uses these files.  If their location
-# is an issue, you will have to hand-patch the file locations before compiling
-# this file.
-#
-# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
-#
-# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
-# character-cell terminals are increasingly replaced by X displays, much of
-# this file is becoming a historical document (this is part of the reason for
-# the new organization, which puts ANSI types, xterm, Unix consoles,
-# and vt100 up front in confidence that this will catch 95% of new hardware).
-#
-# For the terminal types still alive, I'd like to have manufacturer's
-# contact data (Internet address and/or snail-mail + phone).
-#
-# I'm also interested in enriching the comments so that the latter portions of
-# the file do in fact become a potted history of VDT technology as seen by
-# UNIX hackers.  Ideally, I'd like the headers for each manufacturer to
-# include its live/dead/out-of-the-business status, and for as many
-# terminal types as possible to be tagged with information like years
-# of heaviest use, popularity, and interesting features.
-#
-# I'm especially interested in identifying the obscure entries listed under
-# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
-# wisdom about them gets lost.  If you know a lot about obscure old terminals,
-# please go to the terminfo resource page, grab the UFO file (ufo.ti), and
-# eyeball it for things you can identify and describe.
-#
-# If you have been around long enough to contribute, please read the file
-# with this in mind and send me your annotations.
-#
-# COPYRIGHTS AND OTHER DELUSIONS
-#
-# The BSD ancestor of this file had a standard Regents of the University of
-# California copyright with dates from 1980 to 1993.
-#
-# Some information has been merged in from a terminfo file SCO distributes.
-# It has an obnoxious boilerplate copyright which I'm ignoring because they
-# took so much of the content from the ancestral BSD versions of this file
-# and didn't attribute it, thereby violating the BSD Regents' copyright.
-#
-# Not that anyone should care.  However many valid functions copyrights may
-# serve, putting one on a termcap/terminfo file with hundreds of anonymous
-# contributors makes about as much sense as copyrighting a wall-full of
-# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
-#
-# This file deliberately has no copyright.  It belongs to no one and everyone.
-# If you claim you own it, you will merely succeed in looking like a fool.
-# Use it as you like.  Use it at your own risk.  Copy and redistribute freely.
-# There are no guarantees anywhere.  Svaha!
-#
-
-######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
-#
-# This section describes terminal classes and brands that are still
-# quite common.
-#
-
-#### Specials
-#
-# Special "terminals".  These are used to label tty lines when you don't
-# know what kind of terminal is on it.  The characteristics of an unknown
-# terminal are the lowest common denominator - they look about like a ti 700.
-#
-
-dumb|80-column dumb tty:\
-	:am:\
-	:co#80:\
-	:bl=^G:cr=^M:do=^J:sf=^J:
-unknown|unknown terminal type:\
-	:gn:tc=dumb:
-lpr|printer|line printer:\
-	:bs:hc:os:\
-	:co#132:li#66:\
-	:bl=^G:cr=^M:do=^J:ff=^L:le=^H:sf=^J:
-glasstty|classic glass tty interpreting ASCII control characters:\
-	:am:bs:\
-	:co#80:\
-	:bl=^G:cl=^L:cr=^M:do=^J:kd=^J:kl=^H:le=^H:nw=^M^J:ta=^I:\
-	:.kbs=^H:
-
-vanilla:\
-	:bs:\
-	:bl=^G:cr=^M:do=^J:sf=^J:
-
-#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
-#
-# See the end-of-file comment for more on these.
-#
-
-# ANSI capabilities are broken up into pieces, so that a terminal
-# implementing some ANSI subset can use many of them.
-ansi+local1:\
-	:do=\E[B:le=\E[D:nd=\E[C:up=\E[A:
-ansi+local:\
-	:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:tc=ansi+local1:
-ansi+tabs:\
-	:bt=\E[Z:ct=\E[2g:st=\EH:ta=^I:
-ansi+inittabs:\
-	:it#8:tc=ansi+tabs:
-ansi+erase:\
-	:cd=\E[J:ce=\E[K:cl=\E[H\E[J:
-ansi+rca:\
-	:ch=\E[%+^AG:cv=\E[%+^Ad:
-ansi+cup:\
-	:cm=\E[%i%d;%dH:ho=\E[H:
-ansi+rep:\
-	:..rp=%p1%c\E[%p2%{1}%-%db:
-ansi+idl1:\
-	:al=\E[L:dl=\E[M:
-ansi+idl:\
-	:AL=\E[%dL:DL=\E[%dM:tc=ansi+idl1:
-ansi+idc:\
-	:IC=\E[%d@:dc=\E[P:ei=\E6:ic=\E[@:im=\E6:
-ansi+arrows:\
-	:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:
-ansi+sgr|ansi graphic renditions:\
-	:mb=\E[5m:me=\E[0m:mk=\E[8m:mr=\E[7m:
-ansi+sgrso|ansi standout only:\
-	:se=\E[m:so=\E[7m:
-ansi+sgrul|ansi underline only:\
-	:ue=\E[m:us=\E[4m:
-ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim:\
-	:md=\E[1m:\
-	:..sa=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m:\
-	:tc=ansi+sgr:tc=ansi+sgrso:tc=ansi+sgrul:
-ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold:\
-	:mh=\E[2m:\
-	:..sa=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m:\
-	:tc=ansi+sgr:tc=ansi+sgrso:tc=ansi+sgrul:
-ansi+pp|ansi printer port:\
-	:pf=\E[4i:po=\E[5i:ps=\E[0i:
-ansi+csr|ansi scroll-region plus cursor save & restore:\
-	:cs=\E[%i%d;%dr:rc=\E8:sc=\E7:
-
-# The IBM PC alternate character set.  Plug this into any Intel console entry.
-# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
-# ROM graphics for control characters such as the diamond, up- and down-arrow.
-# This works with the System V, Linux, and BSDI consoles.  It's a safe bet this
-# will work with any Intel console, they all seem to have inherited \E[11m
-# from the ANSI.SYS de-facto standard.
-klone+acs|alternate character set for ansi.sys displays:\
-	:ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
-	:ae=\E[10m:as=\E[11m:
-
-# Highlight controls corresponding to the ANSI.SYS standard.  Most
-# console drivers for Intel boxes obey these.  Makes the same assumption
-# about \E[11m as klone+acs.  True ANSI/ECMA-48 would have :se=\E[27m:,
-# :ue=\E[24m:, but this isn't a documented feature of ANSI.SYS.
-klone+sgr|attribute control for ansi.sys displays:\
-	:S2=\E[11m:S3=\E[10m:mb=\E[5m:md=\E[1m:me=\E[0;10m:\
-	:mk=\E[8m:mr=\E[7m:\
-	:..sa=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m:\
-	:se=\E[m:so=\E[7m:ue=\E[m:us=\E[4m:tc=klone+acs:
-
-# Highlight controls corresponding to the ANSI.SYS standard.  *All*
-# console drivers for Intel boxes obey these.  Does not assume \E[11m will
-# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
-# diamond and arrow characters under curses.
-klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m):\
-	:as=\E[12m:mb=\E[5m:md=\E[1m:me=\E[0;10m:mk=\E[8m:\
-	:mr=\E[7m:\
-	:..sa=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m:\
-	:se=\E[m:so=\E[7m:ue=\E[m:us=\E[4m:tc=klone+acs:
-
-# KOI8-R (RFC1489) acs (alternate character set)
-# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
-klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset:\
-	:ac=+\020,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225:\
-	:ae=\E[10m:as=\E[11m:
-
-# ANSI.SYS color control.  The setab/setaf caps depend on the coincidence
-# between SVr4/XPG4's color numbers and ANSI.SYS attributes.  Here are longer
-# but equivalent strings that don't rely on that coincidence:
-# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
-# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
-# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
-# They match a subset of ECMA-48.
-klone+color|color control for ansi.sys and ISO6429-compatible displays:\
-	:Co#8:NC#3:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:op=\E[37;40m:
-
-# This is better than klone+color, it doesn't assume white-on-black as the
-# default color pair,  but many `ANSI' terminals don't grok the <op> cap.
-ecma+color|color control for ECMA-48-compatible terminals:\
-	:AX:\
-	:Co#8:NC#3:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:op=\E[39;49m:
-
-# Attribute control for ECMA-48-compatible terminals
-ecma+sgr|attribute capabilities for true ECMA-48 terminals:\
-	:se=\E[27m:ue=\E[24m:tc=klone+sgr:
-
-# For comparison, here are all the capabilities implied by the Intel
-# Binary Compatibility Standard (level 2) that fit within terminfo.
-# For more detail on this rather pathetic standard, see the comments
-# near the end of this file.
-ibcs2|Intel Binary Compatibility Standard prescriptions:\
-	:AL=\E[%dL:DC=\E[%dP:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\
-	:RA=\E[?7l:RI=\E[%dC:S1=\E=%dg:SA=\E[?7h:SF=\E[%dS:\
-	:SR=\E[%dT:UP=\E[%dA:bt=\E[Z:ch=\E[%i%dG:cl=\Ec:\
-	:cm=\E[%i%d;%dH:ct=\E[g:cv=\E[%i%dd:ec=\E[%dX:ei=:im=:\
-	:rc=\E7:sc=\E7:st=\EH:
-
-#### ANSI/ECMA-48 terminals and terminal emulators
-#
-# See near the end of this file for details on ANSI conformance.
-# Don't mess with these entries!  Lots of other entries depend on them!
-#
-# This section lists entries in a least-capable to most-capable order.
-# if you're in doubt about what `ANSI' matches yours, try them in that
-# order and back off from the first that breaks.
-
-# ansi-mr is for ANSI terminals with ONLY relative cursor addressing
-# and more than one page of memory.  It uses local motions instead of
-# direct cursor addressing, and makes almost no assumptions. It does
-# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
-ansi-mr|mem rel cup ansi:\
-	:am:xo:\
-	:co#80:li#24:tc=vanilla:tc=ansi+erase:tc=ansi+local1:
-
-# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
-# beware of screen size problems and memory relative cursor addressing.
-ansi-mini|any ansi terminal with pessimistic assumptions:\
-	:am:xo:\
-	:co#80:li#24:tc=vanilla:tc=ansi+cup:tc=ansi+erase:
-
-# ansi-mtabs adds relative addressing and minimal tab support
-ansi-mtabs|any ansi terminal with pessimistic assumptions:\
-	:it#8:\
-	:ta=^I:tc=ansi+local1:tc=ansi-mini:
-
-# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
-#
-# The following is an entry for the full ANSI 3.64 (1977).  It lacks
-# padding, but most terminals using the standard are "fast" enough
-# not to require any -- even at 9600 bps.  If you encounter problems,
-# try including the padding specifications.
-#
-# Note: the :as: and :ae: specifications are not implemented here, for
-# the available termcap documentation does not make clear WHICH alternate
-# character set to specify.  ANSI 3.64 seems to make allowances for several.
-# Please make the appropriate adjustments to fit your needs -- that is
-# if you will be using alternate character sets.
-#
-# There are very few terminals running the full ANSI 3.64 standard,
-# so I could only test this entry on one verified terminal (Visual 102).
-# I would appreciate the results on other terminals sent to me.
-#
-# Please report comments, changes, and problems to:
-#
-# U.S. MAIL:   Hugh Hansard
-#              Box: 22830
-#              Emory University
-#              Atlanta, GA. 30322.
-#
-# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
-#
-# (Added vt100 :rc:,:sc: to quiet a tic warning --esr)
-ansi77|ansi 3.64 standard 1977 version:\
-	:am:bs:mi:\
-	:co#80:it#8:li#24:\
-	:al=5*\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=5*\E[M:\
-	:do=\E[B:ei=\E[4l:ho=\E[H:im=\E[4h:k1=\EOP:k2=\EOR:k4=\EOS:\
-	:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
-	:nd=\E[C:nw=^M\ED:rc=\E8:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:\
-	:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
-
-# Procomm and some other ANSI emulations don't recognize all of the ANSI-
-# standard capabilities.  This entry deletes :UP:, :RI:, :DO:, :LE:, and
-# <vpa>/<hpa> capabilities, forcing curses to use repetitions of :up:,
-# :nd:, :do: and :le:.  Also deleted :IC: and :ic:, as QModem up to
-# 5.03 doesn't recognize these.  Finally, we delete :rp: and :sr:, which seem
-# to confuse many emulators.  On the other hand, we can count on these programs
-# doing :ae:/:as:/:sa:. Older versions of this entry featured
-# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
-# ANSI.SYS influence.
-# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
-pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode):\
-	:am:bs:mi:ms:\
-	:co#80:it#8:li#24:\
-	:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:ct=\E[2g:dc=\E[P:dl=\E[M:do=\E[B:\
-	:ho=\E[H:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
-	:le=\E[D:nd=\E[C:sf=^J:st=\EH:ta=^I:up=\E[A:\
-	:tc=klone+sgr-dumb:
-pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode):\
-	:li#25:tc=pcansi-m:
-pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode):\
-	:li#33:tc=pcansi-m:
-pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode):\
-	:li#43:tc=pcansi-m:
-# The color versions.  All PC emulators do color...
-pcansi|ibm-pc terminal programs claiming to be ansi:\
-	:tc=klone+color:tc=pcansi-m:
-pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines:\
-	:li#25:tc=pcansi:
-pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines:\
-	:li#33:tc=pcansi:
-pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines:\
-	:li#43:tc=pcansi:
-
-# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
-# If you want pound signs rather than dollars, replace `B' with `A'
-# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
-# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
-ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes:\
-	:5i:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
-	:cb=\E[1K:ch=\E[%i%dG:ct=\E[2g:cv=\E[%i%dd:ec=\E[%dX:ei=:\
-	:im=:kB=\E[Z:kI=\E[L:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:\
-	:nw=\r\E[S:pf=\E[4i:po=\E[5i:..rp=%p1%c\E[%p2%{1}%-%db:\
-	:s0=\E(B:s1=\E)B:s2=\E*B:s3=\E+B:ta=\E[I:tc=pcansi-m:
-
-# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
-# standard terminfo.  Assumes ANSI.SYS-compatible attributes and color.
-# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
-ansi|ansi/pc-term compatible with color:\
-	:u6=\E[%i%d;%dR:u7=\E[6n:..u8=\E[?%[;0123456789]c:\
-	:u9=\E[c:tc=ecma+color:tc=klone+sgr:tc=ansi-m:
-
-# ansi-generic is a vanilla ANSI terminal. This is assumed to implement
-# all the normal ANSI stuff with no extensions. It assumes
-# insert/delete line/char is there, so it won't work with
-# vt100 clones. It assumes video attributes for bold, blink,
-# underline, and reverse, which won't matter much if the terminal
-# can't do some of those. Padding is assumed to be zero, which
-# shouldn't hurt since xon/xoff is assumed.
-ansi-generic|generic ansi standard terminal:\
-	:am:xo:\
-	:co#80:li#24:tc=vanilla:tc=ansi+csr:tc=ansi+cup:\
-	:tc=ansi+rca:tc=ansi+erase:tc=ansi+tabs:tc=ansi+local:\
-	:tc=ansi+idc:tc=ansi+idl:tc=ansi+rep:tc=ansi+sgrbold:\
-	:tc=ansi+arrows:
-
-#### DOS ANSI.SYS variants
-#
-# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
-# documentation (except for the keyboard key reassignment feature, which
-# doen't fit the <pfkey> model well).  The klone+acs sequences were valid
-# though undocumented.  The <pfkey> capability is untested but should work for
-# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
-# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
-ansi.sys-old|ANSI.SYS under PC-DOS 2.1:\
-	:am:bs:mi:ms:xo:\
-	:co#80:li#25:\
-	:RA=\E[?7l:SA=\E[?7h:ce=\E[k:cl=\E[2J:cm=\E[%i%d;%dH:\
-	:do=\E[B:ho=\E[H:is=\E[m\E[?7h:kd=^J:kh=^^:kl=^H:kr=^L:\
-	:ku=^K:le=^H:nd=\E[C:pk=\E[0;%+\:;"%s":rc=\E[u:sc=\E[s:\
-	:u6=\E[%i%d;%dR:u7=\E[6n:up=\E[A:tc=klone+color:\
-	:tc=klone+sgr:
-ansi.sys|ANSI.SYS 3.1 and later versions:\
-	:ce=\E[K:tc=ansi.sys-old:
-
-#
-# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
-# This should only be used when the terminal emulator cannot redefine the keys.
-# Since redefining keys with ansi.sys also affects PC-DOS programs, the key
-# definitions must be restored.  If the terminal emulator is quit while in vi
-# or others using :ks:/:ke:, the keypad will not be defined as per PC-DOS.
-# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
-# (^U and ^D are already defined for tn3270).  The ESC is safe for vi but it
-# does "beep".  ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
-# Note that :kl: is always BS, because PC-dos can tolerate this change.
-# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
-# Consequently the End keypad key could not be set (it is relatively safe and
-# actually useful because it sends ^@ O, which beeps and opens a line above).
-ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi:\
-	:is=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p:\
-	:ke=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p:\
-	:ks=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p:\
-	:tc=ansi.sys:
-#
-# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
-nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS:\
-	:al=\E[1L:dc=\E[1P:dl=\E[1M:ei=:ic=\E[1@:im=:\
-	:is=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n:\
-	:tc=ansi.sys:
-#
-# See ansi.sysk and nansi.sys above.
-nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi:\
-	:al=\E[1L:dc=\E[1P:dl=\E[1M:ei=:ic=\E[1@:im=:\
-	:is=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p:\
-	:tc=ansi.sysk:
-
-#### ANSI console types
-#
-
-#### BeOS
-#
-# BeOS entry for Terminal program Seems to be almost ANSI
-beterm|BeOS Terminal:\
-	:am:eo:mi:ms:xn:xo:\
-	:Co#8:NC#5:co#80:it#8:li#25:pa#64:\
-	:&7=^Z:@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:\
-	:DL=\E[%dM:DO=\E[%dB:F1=\E[21~:F2=\E[22~:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:Sb=\E[%+(m:Sf=\E[%+^^m:UP=\E[%dA:\
-	:al=\E[L:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%dG:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:cv=\E[%i%dd:dc=\E[P:dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:\
-	:ho=\E[H:ic=\E[@:im=\E[4h:k1=\E[11~:k2=\E[12~:k3=\E[13~:\
-	:k4=\E[14~:k5=\E[15~:k6=\E[16~:k7=\E[17~:k8=\E[18~:\
-	:k9=\E[19~:k;=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
-	:kb=^H:kd=\E[B:ke=\E[?4l:kh=\E[1~:kl=\E[D:kr=\E[C:\
-	:ks=\E[?4h:ku=\E[A:le=^H:md=\E[1m:me=\E[0;10m:mr=\E[7m:\
-	:nd=\E[C:nw=^M^J:op=\E[m:r1=\Ec:rc=\E8:sc=\E7:se=\E[m:sf=^J:\
-	:so=\E[7m:sr=\EM:st=\EH:ta=^I:u6=\E[%i%d;%dR:u7=\E[6n:\
-	:ue=\E[24m:up=\E[A:us=\E[4m:
-
-#### Linux consoles
-#
-
-# This entry is good for the 1.2.13 or later version of the Linux console.
-#
-# ***************************************************************************
-# *                                                                         *
-# *                           WARNING:                                      *
-# * Linuxes come with a default keyboard mapping kcbt=^I.  This entry, in   *
-# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
-# * character. Here are the keymap replacement lines that will set this up: *
-# *                                                                         *
-#	keycode  15 = Tab             Tab
-#		alt     keycode  15 = Meta_Tab
-#		shift	keycode  15 = F26
-#	string F26 ="\033[Z"
-# *                                                                         *
-# * This has to use a key slot which is unfortunate (any unused one will    *
-# * do, F26 is the higher-numbered one).  The change ought to be built      *
-# * into the kernel tables.                                                 *
-# *                                                                         *
-# ***************************************************************************
-#
-# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
-# and it matters, turn off <ccc>.  The %02x escape used to implement this is
-# not back-portable to SV curses and not supported in ncurses versions before
-# 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size
-# themselves; this entry assumes that capability.
-#
-# This entry is good for the 1.2.13 or later version of the Linux console.
-#
-# ***************************************************************************
-# *                                                                         *
-# *                           WARNING:                                      *
-# * Linuxes come with a default keyboard mapping kcbt=^I.  This entry, in   *
-# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
-# * character. Here are the keymap replacement lines that will set this up: *
-# *                                                                         *
-#	keycode  15 = Tab             Tab
-#		alt     keycode  15 = Meta_Tab
-#		shift	keycode  15 = F26
-#	string F26 ="\033[Z"
-# *                                                                         *
-# * This has to use a key slot which is unfortunate (any unused one will    *
-# * do, F26 is the higher-numbered one).  The change ought to be built      *
-# * into the kernel tables.                                                 *
-# *                                                                         *
-# ***************************************************************************
-#
-# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
-# and it matters, turn off <ccc>.  The %02x escape used to implement this is
-# not back-portable to SV curses and not supported in ncurses versions before
-# 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size
-# themselves; this entry assumes that capability.
-#
-# The 2.2.x kernels add a private mode that sets the cursor type; use that to
-# get a block cursor for cvvis.
-# reported by Frank Heckenbach <frank@g-n-u.de>.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-linux|linux console:\
-	:am:eo:mi:ms:ut:xn:xo:\
-	:NC#18:it#8:\
-	:&7=^Z:@7=\E[4~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:F1=\E[23~:\
-	:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:\
-	:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:IC=\E[%d@:\
-	:K2=\E[G:Km=\E[M:al=\E[L:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
-	:ch=\E[%i%dG:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:dl=\E[M:\
-	:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:\
-	:k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:\
-	:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kB=\E[Z:kD=\E[3~:\
-	:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\E[B:kh=\E[1~:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mh=\E[2m:mr=\E[7m:nd=\E[C:\
-	:nw=^M^J:r1=\Ec\E]R:rc=\E8:sc=\E7:se=\E[27m:sf=^J:sr=\EM:\
-	:st=\EH:ta=^I:u6=\E[%i%d;%dR:u7=\E[6n:u8=\E[?6c:u9=\E[c:\
-	:ue=\E[24m:up=\E[A:us=\E[4m:vb=200\E[?5h\E[?5l:\
-	:ve=\E[?25h\E[?0c:vi=\E[?25l\E[?1c:vs=\E[?25h\E[?8c:\
-	:tc=klone+sgr:tc=ecma+color:
-linux-m|Linux console no color:\
-	:Co@:pa@:\
-	:AB@:AF@:Sb@:Sf@:tc=linux:
-linux-c-nc|linux console 1.3.x hack for ncurses only:\
-	:cc:\
-	:..Ic=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x:\
-	:oc=\E]R:tc=linux:
-# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
-linux-c|linux console 1.3.6+ with private palette for each virtual console:\
-	:cc:\
-	:Co#8:pa#64:\
-	:..Ic=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p3%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p4%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;:\
-	:oc=\E]R:tc=linux:
-
-# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
-linux-nic|linux with ich/ich1 suppressed for non-curses programs:\
-	:IC@:ei=:ic@:im=:tc=linux:
-
-# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
-# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
-linux-koi8|linux with koi8 alternate character set:\
-	:ac=+\020,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224:\
-	:tc=linux:tc=klone+koi8acs:
-
-# Another entry for KOI8-r with Qing Long's acsc.
-# (which one better complies with the standard?)
-linux-koi8r|linux with koi8-r alternate character set:\
-	:tc=linux:tc=klone+koi8acs:
-
-# Entry for the latin1 and latin2 fonts
-linux-lat|linux with latin1 or latin2 alternate character set:\
-	:ac=+\020,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376:\
-	:tc=linux:
-
-#### Mach
-#
-
-# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
-mach|Mach Console:\
-	:am:km:\
-	:co#80:it#8:li#25:\
-	:@7=\E[Y:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\Ec:\
-	:cm=\E[%i%d;%dH:cr=^M:dl=\E[M:do=^J:ho=\E[H:k1=\EOP:\
-	:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:\
-	:k9=\EOX:k;=\EOY:kD=\E[9:kH=\E[F:kI=\E[@:kN=\E[U:kP=\E[V:\
-	:kb=\177:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:se=\E[0m:\
-	:sf=^J:so=\E[7m:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:
-mach-bold|Mach Console with bold instead of underline:\
-	:ue=\E[0m:us=\E[1m:tc=mach:
-mach-color|Mach Console with ANSI color:\
-	:Co#8:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:mh=\E[2m:mk=\E[8m:op=\E[37;40m:\
-	:se=\E[27m:tc=mach:
-
-#### OSF Unix
-#
-
-# OSF/1 1.1 Snapshot 2
-pmcons|pmconsole|PMAX console:\
-	:am:\
-	:co#128:li#57:\
-	:bl=^G:cl=^L:cr=^M:do=^J:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
-	:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:sf=^J:ta=^I:up=^K:
-
-# SCO console and SOS-Syscons console for 386bsd
-# (scoansi: had unknown capabilities
-#	:Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
-#	:GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
-#	:G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
-#	:CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
-#	:WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
-# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
-# on the :as:=\E[12m  -- esr)
-#
-# klone+sgr-dumb is an error since the acsc does not match -TD
-#
-# In this description based on SCO's keyboard(HW) manpage list of default function key
-# values:
-#	F13-F24 are shifted F1-F12
-#	F25-F36 are control F1-F12
-#	F37-F48 are shift+control F1-F12
-#
-# hpa/vpa work in the console, but not in scoterm:
-#	hpa=\E[%p1%dG,
-#	vpa=\E[%p1%dd,
-#
-# SCO's terminfo uses
-#	kLFT=\E[d,
-#	kRIT=\E[c,
-# which do not work (console or scoterm).
-#
-# Console documents only 3 attributes can be set with SGR (so we don't use sgr).
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-scoansi|SCO Extended ANSI standard crt:\
-	:am:bs:eo:xo:\
-	:co#80:it#8:li#25:\
-	:AL=\E[%dL:DL=\E[%dM:SF=\E[%dS:SR=\E[%dT:ae=\E[10m:\
-	:al=\E[L:as=\E[12m:bl=^G:bt=\E[Z:cd=\E[m\E[J:ce=\E[m\E[K:\
-	:cl=\E[2J\E[H:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=:\
-	:ho=\E[H:ic=\E[@:im=:k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:\
-	:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:kD=^_:kI=\E[L:\
-	:kN=\E[G:kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\
-	:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0;10m:mr=\E[7m:\
-	:nd=\E[C:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:ue=\E[m:\
-	:up=\E[A:us=\E[4m:ve=\E[=10;12C:vi=\E[=14;12C:\
-	:vs=\E[=0;12C:
-
-# This actually describes the generic SVr4 display driver for Intel boxes.
-# The :mh=\E[2m: isn't documented and therefore may not be reliable.
-# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
-att6386|at386|386at|AT&T WGS 6386 console:\
-	:am:bw:eo:xo:\
-	:co#80:it#8:li#25:\
-	:@7=\E[Y:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\EOZ:\
-	:F2=\EOA:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:\
-	:SR=\E[%dT:UP=\E[%dA:\
-	:ac=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~:\
-	:ae=\E[10m:al=\E[1L:as=\E[12m:bl=^G:bt=\E[Z:cd=\E[J:\
-	:ce=\E[K:ch=\E[%i%dG:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:\
-	:ct=\E[2g:cv=\E[%i%dd:dc=\E[P:dl=\E[1M:do=\E[B:ec=\E[%dX:\
-	:ei=:ho=\E[H:ic=\E[1@:im=:is=\E[0;10;39m:k1=\EOP:k2=\EOQ:\
-	:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:\
-	:k;=\EOY:kB=^]:kD=\E[P:kI=\E[@:kM=\E0:kN=\E[U:kP=\E[V:kb=^H:\
-	:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:\
-	:md=\E[1m:me=\E[0;10m:mh=\E[2m:mk=\E[9m:mr=\E[7m:nd=\E[C:\
-	:nw=\r\E[S:rc=\E8:\
-	:..sa=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m:\
-	:sc=\E7:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:st=\EH:ta=^I:\
-	:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[=1C:vi=\E[=C:\
-	:tc=klone+color:
-# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
-pc6300plus|AT&T 6300 plus:\
-	:am:bs:xo:\
-	:co#80:li#24:\
-	:al=\E[1L:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[2J\E[H:\
-	:cm=\E[%i%2;%2H:cr=^M:ct=\E[3g:dc=\E[1P:dl=\E[1M:do=\E[B:\
-	:ei=:ho=\E[H:ic=\E[1@:im=:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:\
-	:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:k9=\EOk:k;=\EOu:kb=^H:\
-	:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:\
-	:me=\E[m:mh=\E[2m:mk=\E[9m:mr=\E[7m:nd=\E[C:nw=^M^J:\
-	:se=\E[m:sf=^J:so=\E[7m:st=\EH:ue=\E[m:up=\E[A:us=\E[4m:\
-	:ve=\E[=1C:vi=\E[=C:
-
-# From: Benjamin C. W. Sittler <bsittler@nmt.edu>
-#
-# I have a UNIX PC which I use as a terminal attached to my Linux PC.
-# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
-# is broken. All the special key sequences are broken, making it unusable
-# with Emacs. The problem stems from the following:
-#
-# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
-# keypad!), loadable fonts, and strange highlighting modes ("dithered"
-# half-intensity, "smeared" bold, and real strike-out, for example.) It also
-# uses resizable terminal windows, but the bundled terminal program always
-# uses an 80x24 window (and doesn't support seem to support a 132-column
-# mode.)
-#
-# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
-# library which was a superset of SVr3.5 curses (called tam, for "terminal
-# access method".) tam includes support for real, overlapping windows,
-# onscreen function key labels, and bitmap graphics. But since the primary
-# user interface on the UNIX PC was a GUI program (ua, for "user
-# assistant",) and remote administration was considered important for the
-# machine, tam also supported VT100-compatible terminals attached to the
-# serial port or used across the StarLan network. To simulate the extra keys
-# not present on a VT100, users could press ESC and a two-letter sequence,
-# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
-# however, were not the same as those sent by the actual Undo key. The
-# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
-# (If you're interested in adding some of the tam calls to ncurses, btw, I
-# have the full documentation and several programs which use tam. It also
-# used an extended terminfo format to describe key sequences, special
-# highlighting modes, etc.)
-#
-# KEYS: This means that ncurses would quite painful on the UNIX PC, since
-# there are two sequences for every key-modifier combination (local keyboard
-# sequence and remote "VT100" sequence.) But I doubt many people are trying
-# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
-# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
-# seem to have been built from the manual describing the VT100 sequences.
-# This means it doesn't work for a real live UNIX PC.
-#
-# FONTS: The UNIX PC also has a strange interpretation of "alternate
-# character set". Rather than the VT100 graphics you might expect, it allows
-# up to 8 custom fonts to be loaded at any given time. This means that
-# programs expecting VT100 graphics will usually be disappointed. For this
-# reason I have disabled the smacs/rmacs sequences, but they could easily be
-# re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
-# manpage), should you wish to do so:
-#
-# SGR10 - Select font 0 - ESC [ 10 m or SO
-# SGR11 - Select font 1 - ESC [ 11 m or SI
-# SGR12 - Select font 2 - ESC [ 12 m
-# ... (etc.)
-# SGR17 - Select font 7 - ESC [ 17 m
-#
-# Graphics for line drawing are not reliably found at *any* character
-# location because the UNIX PC has dynamically reloadable fonts. I use font
-# 0 for regular text and font 1 for italics, but this is by no means
-# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
-#
-# MISC: The cursor visible/cursor invisible sequences were swapped in the
-# distributed terminfo.
-#
-# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
-# the UNIX PC terminfo entry. The modified version works great with Lynx,
-# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
-# attached by serial cable. In Emacs, even the Undo key works, and many
-# applications can now use the F1-F8 keys.
-#
-# esr's notes:
-#	Terminfo entry for the AT&T Unix PC 7300
-#	from escape(7) in Unix PC 7300 Manual.
-#	Somewhat similar to a vt100-am (but different enough
-#	to redo this from scratch.)
-#
-#	/***************************************************************
-#	*
-#	*           FONT LOADING PROGRAM FOR THE UNIX PC
-#	*
-#	*     This routine loads a font defined in the file ALTFONT
-#	*     into font memory slot #1.  Once the font has been loaded,
-#	*     it can be used as an alternative character set.
-#	*
-#	*     The call to ioctl with the argument WIOCLFONT is the key
-#	*     to this routine.  For more information, see window(7) in
-#	*     the PC 7300 documentation.
-#	***************************************************************/
-#	#include <string.h>		/* needed for strcpy call */
-#	#include <sys/window.h>         /* needed for ioctl call */
-#	#define FNSIZE	60		/* font name size */
-#	#define ALTFONT  "/usr/lib/wfont/special.8.ft"  /* font file */
-#	/*
-#	*     The file /usr/lib/wfont/special.8.ft comes with the
-#	*     standard PC software.  It defines a graphics character set
-#	*     similar to that of the Teletype 5425 terminal.  To view
-#	*     this or other fonts in /usr/lib/wfont, use the command
-#	*     cfont <filename>.  For further information on fonts see
-#	*     cfont(1) in the PC 7300 documentation.
-#	*/
-#
-#	struct altfdata 	/* structure for alt font data */
-#	{
-#	short	altf_slot;		/* memory slot number */
-#	char	altf_name[FNSIZE];	/* font name (file name) */
-#	};
-#	ldfont()
-#	{
-#		int wd;		/* window in which altfont will be */
-#		struct altfdata altf;
-#		altf.altf_slot=1;
-#		strcpy(altf.altf_name,ALTFONT);
-#		for (wd =1; wd < 12; wd++) {
-#		     ioctl(wd, WIOCLFONT,&altf);
-#	        }
-#	}
-#
-# (att7300: added :vi:/:ve:/:ic:/<invis> from the BSDI entry,
-# they're confirmed by the man page for the System V display---esr)
-#
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300:\
-	:am:xo:\
-	:co#80:it#8:li#24:\
-	:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
-	:UP=\E[%dA:al=\E[L:bl=^G:bt=\E^I:cd=\E[0J:ce=\E[0K:\
-	:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
-	:do=\E[B:ei=:ho=\E[H:i1=\017\E[=1w:ic=\E[@:im=:k1=\EOc:\
-	:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:\
-	:kD=\ENf:kI=\ENj:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[9m:md=\E[1m:\
-	:me=\E[0;10m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:se=\E[m:\
-	:sf=^J:so=\E[7m:sr=\EM:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[=0C:\
-	:vi=\E[=1C:
-
-# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
-# from SGI's terminfo database.  SGI's entry shows F9-F12 with the codes
-# for the application keypad mode.  We have added iris-ansi-ap rather than
-# change the original to keypad mode.
-#
-# (iris-ansi: added rmam/smam based on init string -- esr)
-#
-# This entry, and those derived from it, is used in xwsh (also known as
-# winterm).  Some capabilities that do not fit into the terminfo model
-# include the shift- and control-functionkeys:
-#
-# F1-F12 generate different codes when shift or control modifiers are used.
-# For example:
-#	F1      	\E[001q
-#	shift F1	\E[013q
-#	control-F1	\E[025q
-#
-# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
-# \EOP to \EOS.  The shifted and control modifiers still do the same thing.
-#
-# The cursor keys also have different codes:
-#	control-up	\E[162q
-#	control-down	\E[165q
-#	control-left	\E[159q
-#	control-right	\E[168q
-#
-#	shift-up	\E[161q
-#	shift-down	\E[164q
-#	shift-left	\E[158q
-#	shift-right	\E[167q
-#
-#	control-tab	\[072q
-#
-iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100):\
-	:am:\
-	:co#80:it#8:li#40:\
-	:!2=\E[218q:#2=\E[143q:#4=\E[158q:%9=\E[209q:%f=\E[210q:\
-	:%i=\E[167q:&7=\E[217q:*4=\E[P:*7=\E[147q:@7=\E[146q:\
-	:@8=^M:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:F1=\E[011q:\
-	:F2=\E[012q:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
-	:UP=\E[%dA:al=\E[L:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dl=\E[M:do=^J:\
-	:ho=\E[H:is=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8:\
-	:k1=\E[001q:k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:\
-	:k6=\E[006q:k7=\E[007q:k8=\E[008q:k9=\E[009q:k;=\E[010q:\
-	:kB=\E[Z:kD=\177:kI=\E[139q:kM=\E[146q:kN=\E[154q:\
-	:kP=\E[150q:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
-	:le=\E[D:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:\
-	:pk=\EP101;%d.y%s\E\\:rc=\E8:sc=\E7:se=\E[m:sf=\ED:\
-	:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:\
-	:ve=\E[9/y\E[12/y\E[=6l:vs=\E[10/y\E[=1h\E[=2l\E[=6h:
-iris-ansi-ap|IRIS ANSI in application-keypad mode:\
-	:@8=\EOM:F1=\E[011q:F2=\E[012q:is=\E[?1l\E=\E[?7h:\
-	:k9=\E[009q:k;=\E[010q:tc=iris-ansi:
-
-# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
-# (T.Dickey 98/1/24)
-iris-color|xwsh|IRIX ANSI with color:\
-	:NC#33:\
-	:DC=\E[%dP:IC=\E[%d@:ZH=\E[3m:ZR=\E[23m:cs=\E[%i%d;%dr:\
-	:ec=\E[%dX:ei=:im=:mh=\E[2m:r1=\Ec:\
-	:r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:sc=\E7:\
-	:u6=\E[%i%d;%dR:u7=\E[6n:u8=\E[?1;2c:u9=\E[c:ue=\E[24m:\
-	:tc=klone+color:tc=iris-ansi-ap:
-
-# The following is a version of the ibm-pc entry distributed with PC/IX,
-# (Interactive Systems' System 3 for the Big Blue), modified by Richard
-# McIntosh at UCB/CSM.  The :pt: and :uc: have been removed from the original,
-# (the former is untrue, and the latter failed under UCB/man); standout and
-# underline modes have been added.  Note: this entry describes the "native"
-# capabilities of the PC monochrome display, without ANY emulation; most
-# communications packages (but NOT PC/IX connect) do some kind of emulation.
-pcix|PC/IX console:\
-	:am:bw:eo:\
-	:co#80:li#24:\
-	:cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:do=\E[B:ho=\E[H:\
-	:le=^H:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:ue=\E[m:up=\E[A:\
-	:us=\E[4m:
-
-# (ibmpcx: this entry used to be known as ibmx.
-# It formerly included the following extension capabilities:
-#	:GC=b:GL=v:GR=t:RT=^J:\
-#	:GH=\E[196g:GV=\E[179g:\
-#	:GU=\E[193g:GD=\E[194g:\
-#	:G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
-#	:CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
-#	:WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
-# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
-# ":kh=\E[Y:".  Added IBM-PC forms characters and highlights, they match
-# what was there before. -- esr)
-ibmpcx|xenix|ibmx|IBM PC xenix console display:\
-	:am:bs:ms:\
-	:co#80:li#25:\
-	:@7=\E[d:al=\E[L:cd=\E[J:ce=\E[K:cl=^L:cm=\E[%d;%dH:\
-	:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:k1=\E[K:\
-	:k2=\E[L:k3=\E[M:k4=\E[N:kN=\E[e:kP=\E[Z:kb=^H:kd=\E[B:\
-	:kh=\E[Y:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:nd=\E[C:up=\E[A:\
-	:tc=klone+acs:tc=klone+sgr:
-
-#### QNX
-#
-
-# QNX 4.0 Console
-# Michael's original version of this entry had <am@>, :ti=\Ei:,
-# :te=\Eh\ER:; this was so terminfo applications could write the lower
-# right corner without triggering a scroll.  The ncurses terminfo library can
-# handle this case with the :ic: capability, and prefers :am: for better
-# optimization.  Bug: The <op> capability resets attributes.
-# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
-# (removed: :sa=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,:)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-qnx|qnx4|qnx console:\
-	:km:mi:ms:xt:\
-	:co#80:it#4:li#25:\
-	:al=\EE:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:\
-	:dc=\Ef:dl=\EF:do=^J:ei=:ho=\EH:ic=\Ee:im=:k1=\377\201:\
-	:k2=\377\202:k3=\377\203:k4=\377\204:k5=\377\205:\
-	:k6=\377\206:k7=\377\207:k8=\377\210:k9=\377\211:\
-	:kD=\377\254:kI=\377\253:kN=\377\252:kP=\377\242:\
-	:kd=\377\251:kh=\377\240:kl=\377\244:kr=\377\246:\
-	:ku=\377\241:le=^H:mb=\E{:md=\E<:me=\E}\E]\E>\E):mr=\E(:\
-	:nd=\EC:rp=\Eg%r%+ %.:se=\E):sf=^J:so=\E(:sr=\EI:ta=^I:\
-	:te=\Eh\ER:ti=\Ei:ue=\E]:up=\EA:us=\E[:ve=\Ey1:vi=\Ey0:\
-	:vs=\Ey2:
-#
-#
-qnxt|qnxt4|QNX4 terminal:\
-	:YB:tc=qnx4:
-#
-qnxm|QNX4 with mouse events:\
-	:Yd#1:\
-	:ZC=\E/:ZD=\E":ZJ=\E/>2h:ZT=\E/>2l:ZZ=\E/>1l\E/>9h:\
-	:Za=\E/>7h:Zb=\E/>7l:Zd=\E/>6l:Zf=\E/>1h:Zg=\E/>1h:\
-	:Zh=\E/>1h\E/>9l:Zi=\E/>6h:i1=\E/0t:tc=qnx4:
-#
-qnxw|QNX4 windows:\
-	:YD:tc=qnxm:
-#
-#	Monochrome QNX4 terminal or console. Setting this terminal type will
-#	allow an application running on a color console to behave as if it
-#	were a monochrome terminal. Output will be through stdout instead of
-#	console writes because the term routines will recognize that the
-#	terminal name starts with 'qnxt'.
-#
-qnxtmono|Monochrome QNX4 terminal or console:\
-	:Co@:pa@:\
-	:sp@:tc=qnx4:
-
-# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
-# (esr: commented out <scp> and :te: to avoid warnings.)
-# (TD: derive from original qnx4 entry)
-qnxt2|qnx 2.15 serial terminal:\
-	:am:\
-	:!3@:%h@:%j@:&7@:Sb@:Sf@:dc@:ei=:ic@:im=:rp@:se=\E>:so=\E<:te@:ti@:\
-	:ve@:vi@:vs@:tc=qnx4:
-
-# QNX ANSI terminal definition
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-qansi-g|QNX ANSI:\
-	:am:es:hs:xo:\
-	:co#80:it#8:li#25:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:\
-	:al=\E[1L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[2g:dc=\E[P:\
-	:dl=\E[1M:do=\E[B:ds=\E[r:ec=\E[%dX:ei=:fs=\E[?6h\E8:\
-	:ho=\E[H:i2=\E(B\E)0:ic=\E[1@:im=:\
-	:is=\E>\E[?1l\E[?7h\E[0;10;39;49m:k1=\EOP:k2=\EOQ:\
-	:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:\
-	:kD=\E[P:kI=\E[@:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:ll=\E[99H:mb=\E[5m:\
-	:md=\E[1m:me=\E[m\017:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:\
-	:se=\E[27m:sf=\E[S:so=\E[7m:sr=\E[T:st=\EH:ta=^I:\
-	:ts=\E7\E1;24r\E[?6l\E[25;%i%dH:ue=\E[24m:up=\E[A:\
-	:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
-	:vs=\E[?12;25h:
-#
-qansi|QNX ansi with console writes:\
-	:YA:YC:tc=qansi-g:
-#
-qansi-t|QNX ansi without console writes:\
-	:YB:tc=qansi:
-#
-qansi-m|QNX ansi with mouse:\
-	:Yd#1:\
-	:ZC=\E[:ZD=\E]:ZJ=\E[>2h:ZT=\E[>2l:ZZ=\E[>1l\E[>9h:\
-	:Za=\E[>7h:Zb=\E[>7l:Zd=\E[>6l:Zf=\E[>1h:Zg=\E[>1h:\
-	:Zh=\E[>1h\E[>9l:Zi=\E[>6h:i1=\E[0t:tc=qansi:
-#
-qansi-w|QNX ansi for windows:\
-	:YD:tc=qansi-m:
-
-#### NetBSD consoles
-#
-# pcvt termcap database entries (corresponding to release 3.31)
-# Author's last edit-date: [Fri Sep 15 20:29:10 1995]
-#
-# (For the terminfo master file, I translated these into terminfo syntax.
-# Then I dropped all the pseudo-HP entries. we don't want and can't use
-# the :Xs: flag. Then I split :is: into a size-independent :i1: and a
-# size-dependent :is:.  Finally, I added <rmam>/<smam> -- esr)
-
-# NOTE: :ic: has been taken out of this entry. for reference, it should
-# be <ich1=\E[@>.  For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
-# (esr: added :vi: and :ve: to resolve NetBSD Problem Report #4583)
-pcvtXX|pcvt vt200 emulator (DEC VT220):\
-	:am:km:mi:ms:xn:\
-	:it#8:vt#3:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:SF=\E[%dS:\
-	:SR=\E[%dT:UP=\E[%dA:\
-	:ac=++,,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~:\
-	:ae=\E(B:al=\E[L:as=\E(0:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
-	:i1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:im=\E[4h:\
-	:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:k5=\E[21~:\
-	:k6=\E[23~:k7=\E[24~:k8=\E[25~:kD=\E[3~:kH=\E[4~:kI=\E[2~:\
-	:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:\
-	:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:\
-	:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:\
-	:r1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\
-	:rf=/usr/share/tabset/vt100:sc=\E7:se=\E[27m:sf=\ED:\
-	:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:\
-	:ve=\E[?25h:vi=\E[?25l:
-
-#	NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
-#	termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
-#	50 lines entries; 80 columns
-pcvt25|dec vt220 emulation with 25 lines:\
-	:co#80:li#25:\
-	:is=\E[1;25r\E[25;1H:tc=pcvtXX:
-pcvt28|dec vt220 emulation with 28 lines:\
-	:co#80:li#28:\
-	:is=\E[1;28r\E[28;1H:tc=pcvtXX:
-pcvt35|dec vt220 emulation with 35 lines:\
-	:co#80:li#35:\
-	:is=\E[1;35r\E[35;1H:tc=pcvtXX:
-pcvt40|dec vt220 emulation with 40 lines:\
-	:co#80:li#40:\
-	:is=\E[1;40r\E[40;1H:tc=pcvtXX:
-pcvt43|dec vt220 emulation with 43 lines:\
-	:co#80:li#43:\
-	:is=\E[1;43r\E[43;1H:tc=pcvtXX:
-pcvt50|dec vt220 emulation with 50 lines:\
-	:co#80:li#50:\
-	:is=\E[1;50r\E[50;1H:tc=pcvtXX:
-
-#	NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
-#	termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
-#	50 lines entries; 132 columns
-pcvt25w|dec vt220 emulation with 25 lines and 132 cols:\
-	:co#132:li#25:\
-	:is=\E[1;25r\E[25;1H:tc=pcvtXX:
-pcvt28w|dec vt220 emulation with 28 lines and 132 cols:\
-	:co#132:li#28:\
-	:is=\E[1;28r\E[28;1H:tc=pcvtXX:
-pcvt35w|dec vt220 emulation with 35 lines and 132 cols:\
-	:co#132:li#35:\
-	:is=\E[1;35r\E[35;1H:tc=pcvtXX:
-pcvt40w|dec vt220 emulation with 40 lines and 132 cols:\
-	:co#132:li#40:\
-	:is=\E[1;40r\E[40;1H:tc=pcvtXX:
-pcvt43w|dec vt220 emulation with 43 lines and 132 cols:\
-	:co#132:li#43:\
-	:is=\E[1;43r\E[43;1H:tc=pcvtXX:
-pcvt50w|dec vt220 emulation with 50 lines and 132 cols:\
-	:co#132:li#50:\
-	:is=\E[1;50r\E[50;1H:tc=pcvtXX:
-
-# Terminfo entries to enable the use of the ncurses library in color on a
-# NetBSD-arm32 console (only tested on a RiscPC).
-# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
-# modified codes for setf/setb to setaf/setab, then to klone+color, corrected
-# typo in invis - TD
-arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480):\
-	:am:ms:ut:xn:xo:\
-	:co#80:it#8:li#30:\
-	:@8=\E[M:DO=\E[%dB:K1=\E[q:K2=\E[r:K3=\E[s:K4=\E[p:K5=\E[n:\
-	:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=^J:\
-	:eA=\E(B\E)0:ho=\E[H:k0=\E[y:k1=\E[P:k2=\E[Q:k3=\E[R:\
-	:k4=\E[S:k5=\E[t:k6=\E[u:k7=\E[v:k8=\E[l:k9=\E[w:k;=\E[x:\
-	:kb=^H:kd=\E[B:ke=\E[?1l\E>:kl=\E[D:kr=\E[C:ks=\E[?1h\E=:\
-	:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:mk=\E[8m:\
-	:mr=\E[7m:nd=\E[C:rc=\E8:\
-	:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:..sa=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>:\
-	:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:\
-	:up=\E[A:us=\E[4m:tc=ecma+sgr:tc=klone+color:
-
-arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768):\
-	:co#132:li#50:tc=arm100:
-
-# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
-# manufactured by Sharp for the Japenese market.
-# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
-x68k|x68k-ite|NetBSD/x68k ITE:\
-	:co#96:li#32:\
-	:%1=\E[28~:kC=\E[9~:tc=vt220:
-
-# <tv@pobox.com>:
-# Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
-#
-# (still unfinished, but good enough so far.)
-ofcons:\
-	:bw:\
-	:co#80:li#30:\
-	:AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\
-	:LE=\233%dD:RI=\233%dC:UP=\233%dA:al=\233L:bl=^G:cd=\233J:\
-	:ce=\233K:cl=^L:cm=\233%i%d;%dH:cr=^M:dc=\233P:dl=\233M:\
-	:do=\233B:ei=:ic=\233@:im=:k1=\2330P:k2=\2330Q:k3=\2330W:\
-	:k4=\2330x:k5=\2330t:k6=\2330u:k7=\2330q:k8=\2330r:\
-	:k9=\2330p:k;=\2330M:kD=\233P:kN=\233/:kP=\233?:kb=^H:\
-	:kd=\233B:kl=\233D:kr=\233C:ku=\233A:le=\233D:mb=\2337;2m:\
-	:md=\2331m:me=\2330m:mh=\2332m:mk=\2338m:mr=\2337m:\
-	:nd=\233C:nw=^M^J:se=\2330m:sf=^J:ta=^I:ue=\2330m:up=\233A:\
-	:vb=^G:
-
-# NetBSD "wscons" emulator in vt220 mode
-# These are micro-minimal and probably need to be redone for real
-# after the manner of the pcvt entries.
-wsvt25|NetBSD wscons in 25 line DEC VT220 mode:\
-	:co#80:li#25:tc=vt220:
-
-wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta:\
-	:km:\
-	:co#80:li#25:tc=vt220:
-
-# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
-# DECstation/pmax.
-rcons|BSD rasterconsole:\
-	:tc=sun-il:
-# Color version of above. Color currenly only provided by NetBSD.
-rcons-color|BSD rasterconsole with ANSI color:\
-	:ut:\
-	:Co#8:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:op=\E[m:tc=rcons:
-
-# mgterm -- MGL/MGL2, MobileGear Graphic Library
-# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
-# -- the setf/setb are probably incorrect, more likely setaf/setab -TD
-# -- compare with cons25w
-mgterm:\
-	:NP:am:bs:bw:eo:km:ms:pt:ut:\
-	:Co#8:co#80:it#8:li#18:pa#64:\
-	:@7=\E[F:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[W:\
-	:F2=\E[X:IC=\E[%d@:K2=\E[E:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:\
-	:SR=\E[%dT:Sb=\E[4%dm:Sf=\E[3%dm:UP=\E[%dA:al=\E[L:bl=^G:\
-	:bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%d`:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:cv=\E[%i%dd:dc=\E[P:\
-	:dl=\E[M:do=\E[B:ec=\E[%dX:ei=:ho=\E[H:ic=\E[@:im=:k1=\E[M:\
-	:k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:\
-	:k9=\E[U:k;=\E[V:kB=\E[Z:kD=\177:kI=\E[L:kN=\E[G:kP=\E[I:\
-	:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m:mh=\E[30;1m:mr=\E[7m:nd=\E[C:\
-	:nw=\E[E:op=\E[x:rc=\E8:rs=\E[x\E[m\Ec:sc=\E7:se=\E[m:\
-	:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:up=\E[A:
-
-#### FreeBSD console entries
-#
-# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
-# Andrey Chernov maintains the FreeBSD termcap distributions.
-#
-# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
-# or comment out the :cb: capability in the console entry.
-#
-# Alexander Lukyanov reports:
-# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
-# Now el1 clears not only to the line beginning, but also a large chunk
-# of previous line. But there is another bug - ech does not work at all.
-#
-
-# for syscons
-# common entry without semigraphics
-# Bug: The <op> capability resets attributes.
-# Bug? The ech and el1 attributes appear to move the cursor in some cases; for
-# instance el1 does if the cursor is moved to the right margin first.  Removed
-# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
-#
-# Setting colors turns off reverse; we cannot guarantee order, so use ncv.
-# Note that this disables standout with color.
-cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode):\
-	:NP:am:bw:eo:ms:ut:\
-	:Co#8:NC#21:co#80:it#8:li#25:pa#64:\
-	:@7=\E[F:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:\
-	:DL=\E[%dM:DO=\E[%dB:F1=\E[W:F2=\E[X:IC=\E[%d@:K2=\E[E:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
-	:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%d`:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cv=\E[%i%dd:dc=\E[P:\
-	:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:k1=\E[M:k2=\E[N:\
-	:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:\
-	:k;=\E[V:kB=\E[Z:kD=\177:kI=\E[L:kN=\E[G:kP=\E[I:kb=^H:\
-	:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:\
-	:md=\E[1m:me=\E[m:mh=\E[30;1m:mr=\E[7m:nd=\E[C:nw=\E[E:\
-	:op=\E[x:rs=\E[x\E[m\Ec:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\
-	:ta=^I:up=\E[A:ve=\E[=0C:vs=\E[=1C:
-cons25|ansis|ansi80x25|freebsd console (25-line ansi mode):\
-	:ac=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371:\
-	:tc=cons25w:
-cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode):\
-	:Co@:pa@:\
-	:AB@:AF@:md@:mh@:op@:ue=\E[m:us=\E[4m:tc=cons25:
-cons30|ansi80x30|freebsd console (30-line ansi mode):\
-	:li#30:tc=cons25:
-cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode):\
-	:li#30:tc=cons25-m:
-cons43|ansi80x43|freebsd console (43-line ansi mode):\
-	:li#43:tc=cons25:
-cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode):\
-	:li#43:tc=cons25-m:
-cons50|ansil|ansi80x50|freebsd console (50-line ansi mode):\
-	:li#50:tc=cons25:
-cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode):\
-	:li#50:tc=cons25-m:
-cons60|ansi80x60|freebsd console (60-line ansi mode):\
-	:li#60:tc=cons25:
-cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode):\
-	:li#60:tc=cons25-m:
-cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic:\
-	:ac=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225:\
-	:tc=cons25w:
-cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono):\
-	:Co@:pa@:\
-	:AB@:AF@:op@:ue=\E[m:us=\E[4m:tc=cons25r:
-cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines):\
-	:li#50:tc=cons25r:
-cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono):\
-	:li#50:tc=cons25r-m:
-cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines):\
-	:li#60:tc=cons25r:
-cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono):\
-	:li#60:tc=cons25r-m:
-# ISO 8859-1 FreeBSD console
-cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars:\
-	:ac=+\253,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237:\
-	:tc=cons25w:
-cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono):\
-	:Co@:pa@:\
-	:AB@:AF@:md@:mh@:op@:ue=\E[m:us=\E[4m:tc=cons25l1:
-cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines):\
-	:li#50:tc=cons25l1:
-cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono):\
-	:li#50:tc=cons25l1-m:
-cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines):\
-	:li#60:tc=cons25l1:
-cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono):\
-	:li#60:tc=cons25l1-m:
-
-#### 386BSD and BSD/OS Consoles
-#
-
-# This was the original 386BSD console entry (I think).
-# Some places it's named oldpc3|oldibmpc3.
-# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
-origpc3|origibmpc3|IBM PC 386BSD Console:\
-	:am:bs:bw:eo:xo:\
-	:co#80:li#25:\
-	:ac=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263:\
-	:cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:do=\E[B:ho=\E[H:\
-	:kd=\E[B:kh=\E[Y:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:md=\E[7m:\
-	:me=\E[m\E[1;0x\E[2;7x:nd=\E[C:se=\E[1;0x\E[2;7x:\
-	:sf=\E[S:so=\E[1;7x\E[2;0x:sr=\E[T:ue=\E[1;0x\E[2;7x:\
-	:up=\E[A:us=\E[1;7x\E[2;0x:
-
-# description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
-oldpc3|oldibmpc3|old IBM PC BSD/386 Console:\
-	:bs:km:\
-	:li#25:\
-	:al=\E[L:bl=^G:cr=^M:dl=\E[M:do=^J:kH=\E[F:kI=\E[L:kN=\E[G:\
-	:kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
-	:md=\E[=15F:me=\E[=R:mh=\E[=8F:nw=^M^J:sf=^J:ta=^I:
-
-# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
-# Note, the emulator supports many of the additional console features
-# listed in the iBCS2 (e.g. character-set selection) though not all
-# are described here.  This entry really ought to be upgraded.
-# Also note, the console will also work with fewer lines after doing
-# "stty rows NN", e.g. to use 24 lines.
-# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
-# Bug: The <op> capability resets attributes.
-bsdos-pc|IBM PC BSD/OS Console:\
-	:..sa=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m:\
-	:tc=bsdos-pc-nobold:
-
-bsdos-pc-nobold|BSD/OS PC console w/o bold:\
-	:tc=klone+color:tc=bsdos-pc-m:
-
-bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono:\
-	:am:bs:eo:km:xo:\
-	:co#80:it#8:li#25:\
-	:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
-	:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\Ec:\
-	:cm=\E[%i%d;%dH:cr=^M:dl=\E[M:do=^J:ho=\E[H:kH=\E[F:\
-	:kI=\E[L:kN=\E[G:kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
-	:kr=\E[C:ku=\E[A:le=^H:nd=\E[C:nw=^M^J:rc=\E8:\
-	:..sa=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;:\
-	:sc=\E7:sf=^J:ta=^I:up=\E[A:tc=klone+sgr:
-
-# Old names for BSD/OS PC console used in releases before 4.1.
-pc3|BSD/OS on the PC Console:\
-	:tc=bsdos-pc-nobold:
-ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline:\
-	:tc=bsdos-pc:
-
-# BSD/OS on the SPARC
-bsdos-sparc|Sun SPARC BSD/OS Console:\
-	:tc=sun:
-
-# BSD/OS on the PowerPC
-bsdos-ppc|PowerPC BSD/OS Console:\
-	:tc=bsdos-pc:
-
-#### DEC VT52
-# (<acsc>/:ae:/:as: capabilities aren't in DEC's official entry -- esr)
-vt52|dec vt52:\
-	:bs:\
-	:co#80:it#8:li#24:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=\EG:as=\EF:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :\
-	:cr=^M:do=\EB:ho=\EH:kb=^H:kd=\EB:kl=\ED:kr=\EC:ku=\EA:\
-	:le=\ED:nd=\EC:nw=^M^J:sf=^J:sr=\EI:ta=^I:up=\EA:
-
-#### DEC VT100 and compatibles
-#
-# DEC terminals from the vt100 forward are collected here. Older DEC terminals
-# and micro consoles can be found in the `obsolete' section.  More details on
-# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
-# found near the end of this file.
-#
-# Except where noted, these entries are DEC's official terminfos.
-# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
-# Engineering for more information.  Updated terminfos and termcaps
-# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
-#
-# In October 1995 DEC sold its terminals business, including the VT and Dorio
-# line and trademark, to SunRiver Data Systems.  SunRiver has since changed
-# its name to Boundless Technologies; see http://www.boundless.com.
-#
-
-# NOTE:  Any VT100 emulation, whether in hardware or software, almost
-# certainly includes what DEC called the `Level 1 editing extension' codes;
-# only the very oldest VT100s lacked these and there probably aren't any of
-# those left alive.  To capture these, use one of the VT102 entries.
-#
-# Note that the :xn: glitch in vt100 is not quite the same as on the Concept,
-# since the cursor is left in a different position while in the
-# weird state (concept at beginning of next line, vt100 at end
-# of this line) so all versions of vi before 3.7 don't handle
-# :xn: right on vt100. The correct way to handle :xn: is when
-# you output the char in column 80, immediately output CR LF
-# and then assume you are in column 1 of the next line. If :xn:
-# is on, am should be on too.
-#
-# I assume you have smooth scroll off or are at a slow enough baud
-# rate that it doesn't matter (1200? or less). Also this assumes
-# that you set auto-nl to "on", if you set it off use vt100-nam
-# below.
-#
-# The padding requirements listed here are guesses. It is strongly
-# recommended that xon/xoff be enabled, as this is assumed here.
-#
-# The vt100 uses <rs2> and <rf> rather than :is:/:ct:/:st: because the
-# tab settings are in non-volatile memory and don't need to be
-# reset upon login. Also setting the number of columns glitches
-# the screen annoyingly. You can type "reset" to get them set.
-#
-# The VT100 series terminals have cursor ("arrows") keys which can operate
-# in two different modes: Cursor Mode and Application Mode.  Cursor Mode
-# is the reset state, and is assumed to be the normal state.  Application
-# Mode is the "set" state.  In Cursor Mode, the cursor keys transmit
-# "Esc [ {code}" sequences, conforming to ANSI standards.  In Application
-# Mode, the cursor keys transmit "Esc O <code>" sequences.  Application Mode
-# was provided primarily as an aid to the porting of VT52 applications.  It is
-# assumed that the cursor keys are normally in Cursor Mode, and expected that
-# applications such as vi will always transmit the :ks: string.  Therefore,
-# the definitions for the cursor keys are made to match what the terminal
-# transmits after the :ks: string is transmitted.  If the :ks: string
-# is a null string or is not defined, then cursor keys are assumed to be in
-# "Cursor Mode", and the cursor keys definitions should match that assumption,
-# else the application may fail.  It is also expected that applications will
-# always transmit the :ke: string to the terminal before they exit.
-#
-# The VT100 series terminals have an auxiliary keypad, commonly referred to as
-# the "Numeric Keypad", because it is a cluster of numeric and function keys.
-# The Numeric Keypad which can operate in two different modes: Numeric Mode and
-# Application Mode.  Numeric Mode is the reset state, and is assumed to be
-# the normal state.  Application Mode is the "set" state.  In Numeric Mode,
-# the numeric and punctuation keys transmit ASCII 7-bit characters, and the
-# Enter key transmits the same as the Return key (Note: the Return key
-# can be configured to send either LF (\015) or CR LF).  In Application Mode,
-# all the keypad keys transmit "Esc O {code}" sequences.  The PF1 - PF4 keys
-# always send the same "Esc O {code}" sequences.  It is assumed that the keypad
-# is normally in Numeric Mode.  If an application requires that the keypad be
-# in Application Mode then it is expected that the user, or the application,
-# will set the TERM environment variable to point to a terminfo entry which has
-# defined the :ks: string to include the codes that switch the keypad into
-# Application Mode, and the terminfo entry will also define function key
-# fields to match the Application Mode control codes.  If the :ks: string
-# is a null string or is not defined, then the keypad is assumed to be in
-# Numeric Mode.  If the :ks: string switches the keypad into Application
-# Mode, it is expected that the :ke: string will contain the control codes
-# necessary to reset the keypad to "Normal" mode, and it is also expected that
-# applications which transmit the :ks: string will also always transmit the
-# :ke: string to the terminal before they exit.
-#
-# Here's a diagram of the VT100 keypad keys with their bindings.
-# The top line is the name of the key (some DEC keyboards have the keys
-# labelled somewhat differently, like GOLD instead of PF1, but this is
-# the most "official" name).  The second line is the escape sequence it
-# generates in Application Keypad mode (where "$" means the ESC
-# character).  The third line contains two items, first the mapping of
-# the key in terminfo, and then in termcap.
-#   _______________________________________
-#  |   PF1   |   PF2   |   PF3   |   PF4   |
-#  |   $OP   |   $OQ   |   $OR   |   $OS   |
-#  |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
-#  |    7         8         9         -    |
-#  |   $Ow   |   $Ox   |   $Oy   |   $Om   |
-#  |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
-#  |    4    |    5    |    6    |    ,    |
-#  |   $Ot   |   $Ou   |   $Ov   |   $Ol   |
-#  |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
-#  |    1    |    2    |    3    |         |
-#  |   $Oq   |   $Or   |   $Os   |  enter  |
-#  |_ka1__K1_|_kb2__K2_|_ka3__K3_|  $OM    |
-#  |         0         |   .     |         |
-#  |        $Op        |  $On    |         |
-#  |___kc1_______K4____|_kc3__K5_|_kent_@8_|
-#
-# And here, for those of you with orphaned VT100s lacking documentation, is
-# a description of the soft switches invoked when you do `Set Up'.
-#
-#  Scroll 0-Jump               Shifted 3   0-#
-#  |      1-Smooth             |           1-British pound sign
-#  | Autorepeat 0-Off          | Wrap Around 0-Off
-#  | |          1-On           | |           1-On
-#  | | Screen 0-Dark Bkg       | | New Line 0-Off
-#  | | |      1-Light Bkg      | | |        1-On
-#  | | | Cursor 0-Underline    | | | Interlace 0-Off
-#  | | | |      1-Block        | | | |         1-On
-#  | | | |                     | | | |
-#  1 1 0 1       1 1 1 1       0 1 0 0       0 0 1 0       <--Standard Settings
-#                | | | |                     | | | |
-#                | | | Auto XON/XOFF 0-Off   | | | Power 0-60 Hz
-#                | | |               1-On    | | |       1-50 Hz
-#                | | Ansi/VT52 0-VT52        | | Bits Per Char. 0-7 Bits
-#                | |           1-ANSI        | |                1-8 Bits
-#                | Keyclick 0-Off            | Parity 0-Off
-#                |          1-On             |        1-On
-#                Margin Bell 0-Off           Parity Sense 0-Odd
-#                            1-On                         1-Even
-#
-# The following SET-UP modes are assumed for normal operation:
-#	ANSI_MODE	AUTO_XON/XOFF_ON	NEWLINE_OFF	80_COLUMNS
-#	WRAP_AROUND_ON  JUMP_SCROLL_OFF
-# Other SET-UP modes may be set for operator convenience or communication
-# requirements; I recommend
-#	AUTOREPEAT_ON	BLOCK_CURSOR	MARGIN_BELL_OFF    SHIFTED_3_#
-# Unless you have a graphics add-on such as Digital Engineering's VT640
-# (and even then, whenever it can be arranged!) you should set
-#	INTERLACE_OFF
-#
-# (vt100: I added <rmam>/<smam> based on the init string, also :bs:. -- esr)
-vt100|vt100-am|dec vt100 (w/advanced video):\
-	:am:bs:ms:xn:xo:\
-	:co#80:it#8:li#24:vt#3:\
-	:@8=\EOM:DO=\E[%dB:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:K5=\EOn:\
-	:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=^J:\
-	:eA=\E(B\E)0:ho=\E[H:k0=\EOy:k1=\EOP:k2=\EOQ:k3=\EOR:\
-	:k4=\EOS:k5=\EOt:k6=\EOu:k7=\EOv:k8=\EOl:k9=\EOw:k;=\EOx:\
-	:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
-	:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:\
-	:nd=\E[C:rc=\E8:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:..sa=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>:\
-	:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:\
-	:up=\E[A:us=\E[4m:
-vt100nam|vt100-nam|vt100 no automargins:\
-	:am@:xn@:tc=vt100-am:
-vt100-vb|dec vt100 (w/advanced video) & no beep:\
-	:bl@:vb=\E[?5h\E[?5l:tc=vt100:
-
-# Ordinary vt100 in 132 column ("wide") mode.
-vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video):\
-	:co#132:li#24:\
-	:rs=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=vt100-am:
-vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin):\
-	:co#132:li#14:vt@:\
-	:rs=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=vt100-nam:
-
-# vt100 with no advanced video.
-vt100-nav|vt100 without advanced video option:\
-	:sg#1:\
-	:mb@:md@:me@:mr@:sa@:se=\E[m:so=\E[7m:ue@:us@:tc=vt100:
-vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option):\
-	:co#132:li#14:tc=vt100-nav:
-
-# vt100 with one of the 24 lines used as a status line.
-# We put the status line on the top.
-vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline:\
-	:es:hs:\
-	:li#23:\
-	:cl=\E[2;1H\E[J:cm=\E[%i%+^A;%dH:cs=\E[%i%i%d;%dr:\
-	:ds=\E7\E[1;24r\E8:fs=\E8:ho=\E[2;1H:is=\E7\E[2;24r\E8:\
-	:ts=\E7\E[1;%dH\E[1K:tc=vt100-am:
-
-# Status line at bottom.
-# Clearing the screen will clobber status line.
-vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline:\
-	:es:hs:\
-	:li#23:\
-	:ds=\E7\E[1;24r\E8:fs=\E8:is=\E[1;23r\E[23;1H:\
-	:ts=\E7\E[24;%dH\E[1K:tc=vt100-am:
-
-# Most of the `vt100' emulators out there actually emulate a vt102
-# This entry (or vt102-nsgr) is probably the right thing to use for
-# these.
-vt102|dec vt102:\
-	:mi:\
-	:al=\E[L:dc=\E[P:dl=\E[M:ei=\E[4l:im=\E[4h:tc=vt100:
-vt102-w|dec vt102 in wide mode:\
-	:co#132:\
-	:r3=\E[?3h:tc=vt102:
-
-# Many brain-dead PC comm programs that pretend to be `vt100-compatible'
-# fail to interpret the ^O and ^N escapes properly.  Symptom: the :me:
-# string in the canonical vt100 entry above leaves the screen littered
-# with little  snowflake or star characters (IBM PC ROM character \017 = ^O)
-# after highlight turnoffs.  This entry should fix that, and even leave
-# ACS support working, at the cost of making multiple-highlight changes
-# slightly more expensive.
-# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
-vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes):\
-	:me=\E[m:sa@:tc=vt102:
-
-# VT125 Graphics CRT.  Clear screen also erases graphics
-vt125|vt125 graphics terminal:\
-	:cl=\E[H\E[2J\EPpS(E)\E\\:tc=vt100:
-
-# This isn't a DEC entry, it came from University of Wisconsin.
-# (vt131: I added <rmam>/<smam> based on the init string, also :bs: -- esr)
-vt131|dec vt131:\
-	:am:bs:xn:\
-	:co#80:it#8:li#24:vt#3:\
-	:RA=\E[?7h:SA=\E[?7h:bl=^G:cd=50\E[J:ce=3\E[K:\
-	:cl=50\E[;H\E[2J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:do=^J:ho=\E[H:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:\
-	:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
-	:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=2\E[5m:md=2\E[1m:\
-	:me=2\E[m:mr=2\E[7m:nd=2\E[C:nw=^M^J:\
-	:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:sc=\E7:\
-	:se=2\E[m:so=2\E[7m:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:\
-	:us=2\E[4m:
-
-# vt132 - like vt100 but slower and has ins/del line and such.
-# I'm told that :im:/:ei: are backwards in the terminal from the
-# manual and from the ANSI standard, this describes the actual
-# terminal. I've never actually used a vt132 myself, so this
-# is untested.
-#
-vt132|DEC vt132:\
-	:xn:\
-	:al=\E[L:dc=\E[P:dl=\E[M:ei=\E[4h:im=\E[4l:ip=:sf=\n:\
-	:tc=vt100:
-
-# This vt220 description maps F5--F9 to the second block of function keys
-# at the top of the keyboard.  The "DO" key is used as F10 to avoid conflict
-# with the key marked (ESC) on the vt220.  See vt220d for an alternate mapping.
-# PF1--PF4 are used as F1--F4.
-#
-vt220-old|vt200-old|DEC VT220 in vt100 emulation mode:\
-	:am:bs:mi:pt:xn:xo:\
-	:co#80:li#24:vt#3:\
-	:@7=\E[4~:RA=\E[?7l:SA=\E[?7h:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
-	:if=/usr/share/tabset/vt100:im=\E[4h:\
-	:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
-	:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:k9=\E[21~:\
-	:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:\
-	:kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:\
-	:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nl=^J:rc=\E8:\
-	:rf=/usr/share/tabset/vt100:\
-	:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>:\
-	:sc=\E7:se=\E[27m:sf=20\ED:so=\E[7m:sr=14\EM:ta=^I:\
-	:ue=\E[24m:up=\E[A:us=\E[4m:ve=\E[?25h:vi=\E[?25l:
-
-# A much better description of the VT200/220; used to be vt220-8
-# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
-# designation to accommodate bug in pcvt -TD
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-vt220|vt200|dec vt220:\
-	:5i:am:bs:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:vt#3:\
-	:%0=\E[29~:%1=\E[28~:*6=\E[4~:@0=\E[1~:AL=\E[%dL:\
-	:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:F2=\E[24~:\
-	:F3=\E[25~:F4=\E[26~:F7=\E[31~:F8=\E[32~:F9=\E[33~:\
-	:FA=\E[34~:IC=\E[%d@:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:\
-	:SA=\E[?7h:UP=\E[%dA:ae=\E(B:al=\E[L:as=\E(0:bl=^G:\
-	:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
-	:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
-	:eA=\E)0:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
-	:if=/usr/share/tabset/vt100:im=\E[4h:\
-	:is=\E[?7h\E[>\E[?1h\E F\E[?4l:k1=\EOP:k2=\EOQ:k3=\EOR:\
-	:k4=\EOS:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
-	:k;=\E[21~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:\
-	:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:\
-	:l4=pf4:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
-	:nw=\EE:pf=\E[4i:po=\E[5i:ps=\E[i:r1=\E[?3l:rc=\E8:sc=\E7:\
-	:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:\
-	:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:
-vt220-w|vt200-w|DEC vt220 in wide mode:\
-	:co#132:\
-	:r3=\E[?3h:tc=vt220:
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode:\
-	:am:bs:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:vt#3:\
-	:AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\
-	:LE=\233%dD:RI=\233%dC:UP=\233%dA:ae=^O:al=\233L:as=^N:\
-	:bl=^G:cd=\233J:ce=\233K:cl=\233H\233J:cm=\233%i%d;%dH:\
-	:cr=^M:cs=\233%i%d;%dr:ct=\2333g:dc=\233P:dl=\233M:do=^J:\
-	:ec=\233%dX:ei=\2334l:ho=\233H:\
-	:if=/usr/share/tabset/vt100:im=\2334h:\
-	:is=\233?7h\233>\233?1h\E F\233?4l:k1=\EOP:k2=\EOQ:\
-	:k3=\EOR:k4=\EOS:k6=\23317~:k7=\23318~:k8=\23319~:\
-	:k9=\23320~:kI=\2332~:kN=\2336~:kP=\2335~:kb=^H:kd=\233B:\
-	:kh=\233H:kl=\233D:kr=\233C:ku=\233A:le=^H:mb=\2335m:\
-	:md=\2331m:me=\233m:mr=\2337m:nd=\233C:nw=\EE:rc=\E8:\
-	:sc=\E7:se=\23327m:sf=\ED:so=\2337m:sr=\EM:st=\EH:ta=^I:\
-	:ue=\23324m:up=\233A:us=\2334m:vb=\233?5h\233?5l:
-
-#
-# vt220d:
-# This vt220 description regards F6--F10 as the second block of function keys
-# at the top of the keyboard.  This mapping follows the description given
-# in the VT220 Programmer Reference Manual and agrees with the labeling
-# on some terminals that emulate the vt220.  There is no support for an F5.
-# See vt220 for an alternate mapping.
-#
-vt220d|DEC VT220 in vt100 mode with DEC function key labeling:\
-	:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
-	:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:k5@:\
-	:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
-	:tc=vt220-old:
-
-vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins:\
-	:am@:\
-	:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h:tc=vt220:
-
-# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
-# (not an official DEC entry!)
-# The problem with real vt220 terminals is they don't send escapes when in
-# in vt220 mode.  This can be gotten around two ways.  1> don't send
-# escapes or 2> put the vt220 into vt100 mode and use all the nifty
-# features of vt100 advanced video which it then has.
-#
-# This entry takes the view of putting a vt220 into vt100 mode so
-# you can use the escape key in emacs and everything else which needs it.
-#
-# You probably don't want to use this on a VMS machine since VMS will think
-# it has a vt220 and will get fouled up coming out of emacs
-#
-# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
-# (Added vt100 :rc:,:sc: to quiet a tic warning -- esr)
-vt200-js|vt220-js|dec vt200 series with jump scroll:\
-	:am:\
-	:co#80:\
-	:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
-	:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:dm=:do=^J:ed=:\
-	:ei=\E[4l:ho=\E[H:im=\E[4h:\
-	:is=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:\
-	:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
-	:nw=^M\ED:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\
-	:rf=/usr/lib/tabset/vt100:sc=\E7:se=5\E[27m:sf=\ED:\
-	:so=5\E[7m:sr=\EM:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:
-
-# This was DEC's vt320.  Use the purpose-built one below instead
-#vt320|DEC VT320 in vt100 emulation mode,
-#	use=vt220,
-
-#
-# Use v320n for SCO's LYRIX.  Otherwise, use Adam Thompson's vt320-nam.
-#
-vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode:\
-	:am@:\
-	:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h:tc=vt220:
-
-# These entries are not DEC's official ones, they were purpose-built for the
-# VT320.  Here are the designer's notes:
-# <kel> is end on a PC kbd.  Actually 'select' on a VT.  Mapped to
-# 'Erase to End of Field'... since nothing seems to use 'end' anyways...
-# khome is Home on a PC kbd.  Actually 'FIND' on a VT.
-# Things that use <knxt> usually use tab anyways... and things that don't use
-# tab usually use <knxt> instead...
-# kprv is same as tab - Backtab is useless...
-# I left out :sa: because of its RIDICULOUS complexity,
-# and the resulting fact that it causes the termcap translation of the entry
-# to SMASH the 1k-barrier...
-# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
-# (vt320: uncommented :fs: --esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-vt320|vt300|dec vt320 7 bit terminal:\
-	:am:es:hs:mi:ms:xn:\
-	:co#80:li#24:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:\
-	:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ec=\E[%dX:\
-	:ei=\E[4l:fs=\E[0$}:ho=\E[H:im=\E[4h:\
-	:is=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
-	:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
-	:kb=\177:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:kl=\EOD:kr=\EOC:\
-	:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
-	:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:\
-	:rs=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
-	:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:ts=\E[1$}\E[H\E[K:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:\
-	:vi=\E[?25l:
-vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy:\
-	:am@:\
-	:is=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H:\
-	:rs=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H:\
-	:tc=vt320:
-# We have to init 132-col mode, not 80-col mode.
-vt320-w|vt300-w|dec vt320 wide 7 bit terminal:\
-	:co#132:ws#132:\
-	:is=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
-	:rs=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
-	:tc=vt320:
-vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am:\
-	:am@:\
-	:is=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H:\
-	:rs=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H:\
-	:tc=vt320-w:
-
-# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
-#   which are pretty much a superset of the VT320.  They have the
-#   host writable status line, yet another different DRCS matrix size,
-#   and such, but they add the DEC Technical character set, Multiple text
-#   pages, selectable length pages, and the like.  The difference between
-#   the vt330 and vt340 is that the latter has only 2 planes and a monochrome
-#   monitor, the former has 4 planes and a color monitor.  These terminals
-#   support VT131 and ANSI block mode, but as with much of these things,
-#   termcap/terminfo doesn't deal with these features.
-#
-# Note that this entry is are set up in what was the standard way for GNU
-# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
-# keys were switched into application mode at the same time the numeric pad
-# is switched into application mode.  This changes the definitions of the
-# arrow keys.  Emacs v19 is smarter and mines its keys directly out of
-# your termcap or terminfo entry,
-#
-# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
-# (vt340: string capability "sb=\E[M" corrected to "sr";
-# also, added <rmam>/<smam> based on the init string -- esr)
-vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page:\
-	:am:es:hs:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:vt#3:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=\E[L:as=^N:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
-	:dl=\E[M:do=^J:ds=\E[2$~\r\E[1$}\E[K\E[$}:ei=\E[4l:\
-	:fs=\E[$}:ho=\E[H:im=\E[4h:\
-	:is=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
-	:k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
-	:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
-	:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M\ED:\
-	:r1=\E[?3l:rc=\E8:rf=/usr/share/tabset/vt300:sc=\E7:\
-	:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:ts=\E[2$~\E[1$}\E[1;%dH:ue=\E[24m:up=\E[A:us=\E[4m:\
-	:vb=200\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:vs=\E[?25h:
-
-# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
-# (originally written with vt420 as its primary name, and usable for it).
-#
-# VT400/420 -- This terminal is a superset of the vt320.  It adds the multiple
-#    text pages and long text pages with selectable length of the vt340, along
-#    with left and right margins, rectangular area text copy, fill, and erase
-#    operations, selected region character attribute change operations,
-#    page memory and rectangle checksums, insert/delete column, reception
-#    macros, and other features too numerous to remember right now.  TERMCAP
-#    can only take advantage of a few of these added features.
-#
-# Note that this entry is are set up in what was the standard way for GNU
-# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
-# keys were switched into application mode at the same time the numeric pad
-# is switched into application mode.  This changes the definitions of the
-# arrow keys.  Emacs v19 is smarter and mines its keys directly out of
-# your termcap entry,
-#
-# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
-# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
-# also, added <rmam>/<smam> based on the init string -- esr)
-vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap:\
-	:am:es:hs:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:vt#3:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=\E[L:as=^N:cd=10\E[J:ce=4\E[K:cl=10\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
-	:dl=\E[M:do=^J:ds=\E[2$~\r\E[1$}\E[K\E[$}:ei=\E[4l:\
-	:fs=\E[$}:ho=\E[H:ic=\E[@:im=\E[4h:\
-	:is=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
-	:k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
-	:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
-	:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M\ED:\
-	:r1=\E<\E[?3l\E[!p\E[?7h:rc=\E8:\
-	:rf=/usr/share/tabset/vt300:sc=\E7:se=\E[27m:sf=\ED:\
-	:so=\E[7m:sr=\EM:st=\EH:ta=^I:ts=\E[2$~\E[1$}\E[1;%dH:\
-	:ue=\E[24m:up=\E[A:us=\E[4m:vb=200\E[?5h\E[?5l:\
-	:ve=\E[?25h:vi=\E[?25l:vs=\E[?25h:
-
-# (vt420: I removed :k0:, it collided with <kf10>.  I also restored
-# a missing :sc: -- esr)
-vt420|DEC VT420:\
-	:am:mi:xn:xo:\
-	:co#80:li#24:vt#3:\
-	:*6=\E[4~:@0=\E[1~:RA=\E[?7l:\
-	:S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:SA=\E[?7h:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
-	:i2=\E[?67h\E[64;1"p:if=/usr/share/tabset/vt300:\
-	:im=\E[4h:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:\
-	:k4=\EOS:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:\
-	:k9=\E[21~:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
-	:kb=^H:kd=\E[B:ke=\E>:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
-	:r3=\E[?67h\E[64;1"p:rc=\E8:rf=/usr/share/tabset/vt300:\
-	:..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>:\
-	:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\
-	:up=\E[A:us=\E[4m:
-
-#
-# DEC VT220 and up support DECUDK (user-defined keys).  DECUDK (i.e., pfx)
-# takes two parameters, the key and the string.  Translating the key is
-# straightforward (keys 1-5 are not defined on real terminals, though some
-# emulators define these):
-#
-#               if (key < 16) then  value = key;
-#               else if (key < 21) then value = key + 1;
-#               else if (key < 25) then value = key + 2;
-#               else if (key < 27) then value = key + 3;
-#               else if (key < 30) then value = key + 4;
-#               else value = key + 5;
-#
-# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
-# There's no provision in terminfo for emitting a string in this format, so the
-# application has to know it.
-#
-vt420pc|DEC VT420 w/PC keyboard:\
-	:@7=\E[4~:F1=\E[23~:F2=\E[24~:F3=\E[11;2~:F4=\E[12;2~:\
-	:F5=\E[13;2~:F6=\E[14;2~:F7=\E[15;2~:F8=\E[17;2~:\
-	:F9=\E[18;2~:FA=\E[19;2~:FB=\E[20;2~:FC=\E[21;2~:\
-	:FD=\E[23;2~:FE=\E[24;2~:FF=\E[23~:FG=\E[24~:FH=\E[25~:\
-	:FI=\E[26~:FJ=\E[28~:FK=\E[29~:FL=\E[31~:FM=\E[32~:\
-	:FN=\E[33~:FO=\E[34~:FP=\E[35~:FQ=\E[36~:FR=\E[23;2~:\
-	:FS=\E[24;2~:FT=\E[25;2~:FU=\E[26;2~:FV=\E[28;2~:\
-	:FW=\E[29;2~:FX=\E[31;2~:FY=\E[32;2~:FZ=\E[33;2~:\
-	:Fa=\E[34;2~:Fb=\E[35;2~:Fc=\E[36;2~:\
-	:S6=USR_TERM\:vt420pcdos\::k1=\E[11~:k2=\E[12~:\
-	:k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:k7=\E[18~:\
-	:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\177:kh=\E[H:\
-	:..px=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\:\
-	:tc=vt420:
-
-vt420pcdos|DEC VT420 w/PC for DOS Merge:\
-	:li#25:\
-	:..S1=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;:\
-	:S4=\E[?1;2r\E[34h:\
-	:S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:S6@:\
-	:me=\E[m:sa@:tc=vt420pc:
-
-vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys:\
-	:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
-	:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\
-	:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
-	:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
-	:kD=\177:kh=\E[H:l1=\EOP:l2=\EOQ:l3=\EOR:l4=\EOS:tc=vt420:
-
-vt510|DEC VT510:\
-	:tc=vt420:
-vt510pc|DEC VT510 w/PC keyboard:\
-	:tc=vt420pc:
-vt510pcdos|DEC VT510 w/PC for DOS Merge:\
-	:tc=vt420pcdos:
-
-# VT520/VT525
-#
-# The VT520 is a monochrome text terminal capable of managing up to
-# four independent sessions in the terminal.  It has multiple ANSI
-# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
-# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
-# 925 910+, ADDS A2).  This terminfo data is for the ANSI emulations only.
-#
-# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
-# [Alt]/[Print Screen] depending upon which keyboard and which
-# terminal mode is being used.  If Set-Up has been disabled or
-# assigned to an unknown key, Set-Up may be entered by pressing
-# [F3] as the first key after power up, regardless of keyboard type.
-# (vt520: I added <rmam>/<smam> based on the init string, also :sc: -- esr)
-vt520|DEC VT520:\
-	:am:mi:xn:xo:\
-	:co#80:li#24:vt#3:\
-	:*6=\E[4~:@0=\E[1~:RA=\E[?7l:\
-	:S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:SA=\E[?7h:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
-	:i2=\E[?67h\E[64;1"p:if=/usr/share/tabset/vt300:\
-	:im=\E[4h:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:\
-	:k4=\EOS:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:\
-	:k9=\E[21~:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
-	:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:\
-	:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
-	:..px=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\:\
-	:r3=\E[?67h\E[64;1"p:rc=\E8:rf=/usr/share/tabset/vt300:\
-	:..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>:\
-	:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\
-	:up=\E[A:us=\E[4m:
-
-# (vt525: I added <rmam>/<smam> based on the init string;
-# removed :se:=\E[m, :ue:=\E[m, added :sc: -- esr)
-vt525|DEC VT525:\
-	:am:mi:xn:xo:\
-	:co#80:li#24:vt#3:\
-	:*6=\E[4~:@0=\E[1~:RA=\E[?7l:\
-	:S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:SA=\E[?7h:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
-	:i2=\E[?67h\E[64;1"p:if=/usr/share/tabset/vt300:\
-	:im=\E[4h:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:\
-	:k4=\EOS:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:\
-	:k9=\E[21~:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
-	:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:\
-	:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
-	:..px=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\:\
-	:r3=\E[?67h\E[64;1"p:rc=\E8:rf=/usr/share/tabset/vt300:\
-	:..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>:\
-	:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\
-	:up=\E[A:us=\E[4m:
-
-#### VT100 emulations
-#
-
-# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
-# (the best Windows telnet as of September 1995) presents the name `dec-vt100'
-# to telnetd.   Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
-# that this works best with a stock vt100 entry.
-dec-vt100|EWAN telnet's vt100 emulation:\
-	:tc=vt100:
-
-# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
-dec-vt220|DOS tnvt200 terminal emulator:\
-	:am@:tc=vt220:
-
-# Zstem340 is an (IMHO) excellent VT emulator for PC's.  I recommend it to
-# anyone who needs PC VT340 emulation. (or anything below that level, for
-# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
-# RDBM systems, it includes ReGIS and SiXel support!  I'm impressed...
-# I can send the address if requested.
-# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
-# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
-z340|zstem vt340 terminal emulator 132col 42line:\
-	:li#42:\
-	:is=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H:\
-	:rs=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H:\
-	:tc=vt320-w:
-z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins):\
-	:am@:\
-	:is=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H:\
-	:rs=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H:\
-	:tc=z340:
-
-# CRT is shareware.  It implements some xterm features, including mouse.
-crt|crt-vt220|CRT 2.3 emulating VT220:\
-	:ms:ut:\
-	:NC@:\
-	:st=\EH:u6=\E[%i%d;%dR:u7=\E[6n:u8=\E[?1;2c:u9=\E[c:\
-	:tc=vt220:tc=ecma+color:
-
-# PuTTY 0.58 (released 05 April 2005)
-# http://www.chiark.greenend.org.uk/~sgtatham/putty/
-#
-# This emulates vt100 + vt52 (plus a few vt220 features:  ech, SRM, DECTCEM, as
-# well as SCO and Atari, color palettes from Linux console).  Reading the code,
-# it is intended to be VT102 plus selected features By default, it sets $TERM
-# to xterm, which is incorrect, since several features are misimplemented:
-#
-#	Alt+key always sends ESC+key, so 'km' capability is removed.
-#
-#	Control responses, wrapping and tabs are buggy, failing a couple of
-#	screens in vttest.
-#
-#	xterm mouse support is not implemented (unrelease version may).
-#
-# Several features such as backspace/delete are optional; this entry documents
-# the default behavior -TD
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-putty|xterm clone (win32):\
-	:am:bw:km:mi:ms:xn:\
-	:co#80:it#8:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:\
-	:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ec=\E[%dX:\
-	:ei=\E[4l:ho=\E[H:im=\E[4h:\
-	:is=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>:\
-	:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
-	:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
-	:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:\
-	:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:\
-	:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:rc=\E8:\
-	:rs=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>:sc=\E7:\
-	:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:ue=\E[24m:up=\E[A:\
-	:us=\E[4m:ve=\E[?25h:vi=\E[?25l:
-
-# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
-# T. Teranishi dated Mar 10, 1998.  It is a free software terminal emulator
-# (communication program) which supports:
-#
-#	- Serial port connections.
-#	- TCP/IP (telnet) connections.
-#	- VT100 emulation, and selected VT200/300 emulation.
-#	- TEK4010 emulation.
-#	- File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
-#	  Quick-VAN).
-#	- Scripts using the "Tera Term Language".
-#	- Japanese and Russian character sets.
-#
-# The program does not come with terminfo or termcap entries.  However, the
-# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
-# vt52 or doublesize character support; blinking is done with color).  Besides
-# the HPA, VPA extensions it also implements CPL and CNL.
-#
-# All of the function keys can be remapped.  This description shows the default
-# mapping, as installed.  Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
-# are supported.  F13-F20 are obtained by shifting F3-F10.  The editing keypad
-# is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
-#	kfnd	Insert
-#	kslt	Delete
-#	kich1	Home
-#	kdch1	PageUp
-#	kpp	End
-#	knp	PageDown
-#
-# ANSI colors are implemented, but cannot be combined with video attributes
-# except for reverse.
-#
-# No fonts are supplied with the program, so the acsc string is chosen to
-# correspond with the default Microsoft terminal font.
-#
-# Tera Term recognizes some xterm sequences, including those for setting and
-# retrieving the window title, and for setting the window size (i.e., using
-# "resize -s"), though it does not pass SIGWINCH to the application if the
-# user resizes the window with the mouse.
-teraterm|Tera Term Pro:\
-	:km:xo@:\
-	:NC#43:vt@:\
-	:*6=\E[4~:@0=\E[1~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
-	:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
-	:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\
-	:ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
-	:al=\E[L:cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cv=\E[%i%dd:dc=\E[P:dl=\E[M:ec=\E[%dX:\
-	:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
-	:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
-	:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:mb=\E[5m:md=\E[1m:\
-	:me=\E[m:mr=\E[7m:nd=\E[C:op=\E[100m:se=\E[27m:so=\E[7m:\
-	:sr=\EM:u6=\E[%i%d;%dR:u7=\E[6n:u8=\E[?1;2c:u9=\E[c:\
-	:ue=\E[24m:up=\E[A:us=\E[4m:vb=200\E[?5h\E[?5l:\
-	:ve=\E[?25h:vi=\E[?25l:tc=klone+color:tc=vt100:
-
-# Tested with WinNT 4.0, the telnet application assumes the screensize is
-# 25x80.  This entry uses the 'Terminal' font, to get line-drawing characters.
-#
-# Other notes:
-# a) Fails tack's cup (cursor-addressing) test, though cup works well enough
-#    for casual (occasional) use.  Also fails several of the vttest screens,
-#    but that is not unusual for vt100 "emulators".
-# b) Does not implement vt100 keypad
-# c) Recognizes a subset of vt52 controls.
-ms-vt100|MS telnet imitating dec vt100:\
-	:li#25:\
-	:@8@:K1@:K2@:K3@:K4@:K5@:\
-	:ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
-	:ct@:k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:k;@:u6=\E[%i%d;%dR:\
-	:u7=\E[6n:u8=\E[?6c:u9=\E[c:tc=vt100:
-
-# Tested with Windows 2000, the telnet application runs in a console window,
-# also using 'Terminal' font.
-#
-# Other notes:
-# a) This version has no function keys or numeric keypad.  Unlike the older
-#    version, the numeric keypad is entirely ignored.
-# b) The program sets $TERM to "ansi", which of course is inaccurate.
-ms-vt100-color|windows 2000 ansi (sic):\
-	:ut:\
-	:DC=\E[%dP:IC=\E[%d@:ei=:im=:tc=ecma+color:tc=ms-vt100:
-
-#### X terminal emulators
-#
-# You can add the following line to your .Xdefaults to change the terminal type
-# set by the xterms you start up to my-xterm:
-#
-# *termName:  my-xterm
-#
-# System administrators can change the default entry for xterm instances
-# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm.  In either
-# case, xterm will detect and reject an invalid terminal type, falling back
-# to the default of xterm.
-#
-
-# X10/6.6	11/7/86, minus alternate screen, plus (csr)
-# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
-# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
-# as these seem not to work -- esr)
-x10term|vs100-x10|xterm terminal emulator (X10 window system):\
-	:am:bs:km:mi:ms:xn:xo:\
-	:co#80:it#8:li#65:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:RA=\E[?7l:SA=\E[?7h:\
-	:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\
-	:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\
-	:im=\E[4h:is=\E\E[m\E[?7h\E[?1;4l:k1=\EOP:k2=\EOQ:\
-	:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
-	:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:me=\E[m:\
-	:mr=\E[7m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\
-	:ue=\E[m:up=\E[A:us=\E[4m:
-# Compatible with the R5 xterm
-# (from the XFree86 3.2 distribution, <blink=@> removed)
-# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
-# corrected typos in rs2 string - TD
-# added u6-u9 -TD
-xterm-r5|xterm R5 version:\
-	:am:bs:km:ms:xn:\
-	:co#80:it#8:li#24:\
-	:@7=\E[4~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
-	:F1=\E[23~:F2=\E[24~:IC=\E[%d@:Km=\E[M:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:ic=\E[@:\
-	:im=\E[4h:k0=\EOq:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:\
-	:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
-	:k;=\E[21~:kA=\E[30~:kD=\E[3~:kE=\E[8~:kI=\E[2~:kL=\E[31~:\
-	:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:\
-	:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:\
-	:me=\E[m:mr=\E[7m:nd=\E[C:rc=\E8:\
-	:rs=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H:\
-	:..sa=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m:\
-	:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:u6=\E[%i%d;%dR:u7=\E[6n:u8=\E[?1;2c:u9=\E[c:ue=\E[m:\
-	:up=\E[A:us=\E[4m:
-# Compatible with the R6 xterm
-# (from XFree86 3.2 distribution, <acsc> and :it: added, <blink@> removed)
-# added khome/kend, hts based on the R6 xterm code - TD
-# (khome/kend do not actually work in X11R5 or X11R6, but many people use this
-# for compatibility with other emulators).
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-xterm-r6|xterm-old|xterm X11R6 version:\
-	:am:bs:km:mi:ms:xn:\
-	:co#80:it#8:li#24:\
-	:*6=\E[4~:@0=\E[1~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
-	:DO=\E[%dB:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:\
-	:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:\
-	:FA=\E[34~:Km=\E[M:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:\
-	:al=\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
-	:dl=\E[M:do=^J:eA=\E)0:ei=\E[4l:ho=\E[H:im=\E[4h:\
-	:is=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>:\
-	:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
-	:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
-	:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:\
-	:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
-	:md=\E[1m:me=\E[m:ml=\El:mr=\E[7m:mu=\Em:nd=\E[C:rc=\E8:\
-	:rs=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>:sc=\E7:\
-	:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:u6=\E[%i%d;%dR:\
-	:u7=\E[6n:u8=\E[?1;2c:u9=\E[c:ue=\E[m:up=\E[A:us=\E[4m:
-# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
-# The name has been changed and some aliases have been removed.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System):\
-	:am:bs:km:mi:ms:xn:\
-	:co#80:it#8:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:K1=\EOw:K2=\EOy:K3=\EOu:K4=\EOq:K5=\EOs:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:\
-	:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ec=\E[%dX:\
-	:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:\
-	:is=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>:\
-	:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
-	:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\177:kI=\E[2~:\
-	:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\EOH:\
-	:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:\
-	:me=\E[m\017:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:\
-	:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=\E[2J\E[?47l\E8:\
-	:ti=\E7\E[?47h:ue=\E[24m:up=\E[A:us=\E[4m:\
-	:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:tc=ecma+color:
-
-# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
-# codes for F1-F4 except while in VT220 mode.
-xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System):\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:tc=xterm-xf86-v32:
-
-# This version was released in XFree86 3.3.3 (November 1998).
-# Besides providing printer support, it exploits a new feature that allows
-# xterm to use terminfo-based descriptions with the titeInhibit resource.
-# -- the distribution contained incorrect khome/kend values -TD
-xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System):\
-	:5i:\
-	:*6@:@0@:ei=:ic@:im=:is=\E[!p\E[?3;4l\E[4l\E>:kD=\E[3~:\
-	:mb=\E[5m:mk=\E[8m:pf=\E[4i:po=\E[5i:ps=\E[i:r1=\Ec:\
-	:r2=\E[!p\E[?3;4l\E[4l\E>:\
-	:..sa=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;:\
-	:te=\E[?1047l\E[?1048l:ti=\E[?1048h\E[?1047h:\
-	:tc=xterm-xf86-v33:
-
-# This version was released in XFree86 4.0.
-xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System):\
-	:NP:\
-	:#2=\EO5H:#3=\E[2;5~:#4=\EO5D:%c=\E[6;5~:%e=\E[5;5~:\
-	:%i=\EO5C:*4=\E[3;5~:*7=\EO5F:@7=\EOF:F3=\EO2P:F4=\EO2Q:\
-	:F5=\EO2R:F6=\EO2S:F7=\E[15;2~:F8=\E[17;2~:F9=\E[18;2~:\
-	:FA=\E[19;2~:FB=\E[20;2~:FC=\E[21;2~:FD=\E[23;2~:\
-	:FE=\E[24;2~:FF=\EO5P:FG=\EO5Q:FH=\EO5R:FI=\EO5S:\
-	:FJ=\E[15;5~:FK=\E[17;5~:FL=\E[18;5~:FM=\E[19;5~:\
-	:FN=\E[20;5~:FO=\E[21;5~:FP=\E[23;5~:FQ=\E[24;5~:\
-	:FR=\EO6P:FS=\EO6Q:FT=\EO6R:FU=\EO6S:FV=\E[15;6~:\
-	:FW=\E[17;6~:FX=\E[18;6~:FY=\E[19;6~:FZ=\E[20;6~:\
-	:Fa=\E[21;6~:Fb=\E[23;6~:Fc=\E[24;6~:K1@:K2=\EOE:K3@:K4@:\
-	:K5@:kB=\E[Z:kD=\E[3~:kh=\EOH:\
-	:..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;:\
-	:te=\E[?1049l:ti=\E[?1049h:tc=xterm-xf86-v333:
-
-xterm-xfree86|xterm-new|xterm terminal emulator (XFree86 4.0 Window System):\
-	:NP:\
-	:#2=\EO2H:#3=\E[2;2~:#4=\EO2D:%c=\E[6;2~:%e=\E[5;2~:\
-	:%i=\EO2C:*4=\E[3;2~:*7=\EO2F:@7=\EOF:@8=\EOM:F1=\E[23~:\
-	:F2=\E[24~:F3=\EO2P:F4=\EO2Q:F5=\EO2R:F6=\EO2S:\
-	:F7=\E[15;2~:F8=\E[17;2~:F9=\E[18;2~:FA=\E[19;2~:\
-	:FB=\E[20;2~:FC=\E[21;2~:FD=\E[23;2~:FE=\E[24;2~:\
-	:FF=\EO5P:FG=\EO5Q:FH=\EO5R:FI=\EO5S:FJ=\E[15;5~:\
-	:FK=\E[17;5~:FL=\E[18;5~:FM=\E[19;5~:FN=\E[20;5~:\
-	:FO=\E[21;5~:FP=\E[23;5~:FQ=\E[24;5~:FR=\EO6P:FS=\EO6Q:\
-	:FT=\EO6R:FU=\EO6S:FV=\E[15;6~:FW=\E[17;6~:FX=\E[18;6~:\
-	:FY=\E[19;6~:FZ=\E[20;6~:Fa=\E[21;6~:Fb=\E[23;6~:\
-	:Fc=\E[24;6~:K2=\EOE:Km=\E[M:k1=\EOP:k2=\EOQ:k3=\EOR:\
-	:k4=\EOS:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
-	:k9=\E[20~:k;=\E[21~:kB=\E[Z:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
-	:kd=\EOB:kh=\EOH:kl=\EOD:kr=\EOC:ku=\EOA:tc=xterm-basic:
-#
-# This chunk is used for building the VT220/Sun/PC keyboard variants.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-xterm-basic|xterm terminal emulator - common (XFree86):\
-	:5i:am:km:mi:ms:ut:xn:\
-	:Co#8:co#80:it#8:li#24:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
-	:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:\
-	:SA=\E[?7h:UP=\E[%dA:\
-	:ac=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:\
-	:ch=\E[%i%dG:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:dl=\E[M:\
-	:do=^J:eA=\E(B\E)0:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:\
-	:is=\E[!p\E[?3;4l\E[4l\E>:kD=\E[3~:kb=^H:ke=\E[?1l\E>:\
-	:ks=\E[?1h\E=:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:\
-	:mk=\E[8m:ml=\El:mr=\E[7m:mu=\Em:nd=\E[C:op=\E[39;49m:\
-	:pf=\E[4i:po=\E[5i:ps=\E[i:r1=\Ec:\
-	:r2=\E[!p\E[?3;4l\E[4l\E>:rc=\E8:sc=\E7:se=\E[27m:sf=^J:\
-	:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=\E[?1049l:ti=\E[?1049h:\
-	:u6=\E[%i%d;%dR:u7=\E[6n:u8=\E[?1;2c:u9=\E[c:ue=\E[24m:\
-	:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:
-
-# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
-xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1:\
-	:se=\E[m:ue=\E[m:tc=xterm-xf86-v33:
-
-# This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
-xterm-16color|xterm with 16 colors like aixterm:\
-	:Co#16:NC#32:pa#256:\
-	:..AB=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm:\
-	:..AF=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm:\
-	:..Sb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m:\
-	:..Sf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m:\
-	:tc=xterm-xfree86:
-
-# These variants of XFree86 3.9.16 xterm are built as a configure option.
-xterm-256color|xterm with 256 colors:\
-	:cc:\
-	:Co#256:NC#32:pa#256:\
-	:AB=\E[48;5;%dm:AF=\E[38;5;%dm:\
-	:..Ic=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\:\
-	:Sb=\E[48;5;%dm:Sf=\E[38;5;%dm:tc=xterm-xfree86:
-xterm-88color|xterm with 88 colors:\
-	:Co#88:pa#88:tc=xterm-256color:
-
-# This is another variant, for XFree86 4.0 xterm (T.Dickey)
-# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
-# To use it, your decTerminalID resource must be set to 200 or above.
-#
-#	HTS	\E H	\210
-#	RI	\E M	\215
-#	SS3	\E O	\217
-#	CSI	\E [	\233
-#
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-xterm-8bit|xterm terminal emulator 8-bit controls (X Window System):\
-	:am:bs:km:mi:ms:xn:\
-	:co#80:it#8:li#24:\
-	:AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\
-	:K1=\217w:K2=\217y:K3=\217u:K4=\217q:K5=\217s:LE=\233%dD:\
-	:RI=\233%dC:UP=\233%dA:ae=^O:al=\233L:as=^N:bl=^G:bt=\233Z:\
-	:cd=\233J:ce=\233K:cl=\233H\2332J:cm=\233%i%d;%dH:cr=^M:\
-	:cs=\233%i%d;%dr:ct=\2333g:dc=\233P:dl=\233M:do=^J:\
-	:ec=\233%dX:ei=\2334l:ho=\233H:im=\2334h:\
-	:is=\E7\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>:\
-	:k1=\23311~:k2=\23312~:k3=\23313~:k4=\23314~:k5=\23315~:\
-	:k6=\23317~:k7=\23318~:k8=\23319~:k9=\23320~:kD=\2333~:\
-	:kI=\2332~:kN=\2336~:kP=\2335~:kb=^H:kd=\217B:\
-	:ke=\233?1l\E>:kh=\2331~:kl=\217D:kr=\217C:ks=\233?1h\E=:\
-	:ku=\217A:le=^H:mb=\2335m:md=\2331m:me=\233m^O:mr=\2337m:\
-	:nd=\233C:rc=\E8:sc=\E7:se=\23327m:sf=^J:so=\2337m:sr=\215:\
-	:st=\210:ta=^I:te=\233?1049l:ti=\233?1049h:ue=\23324m:\
-	:up=\233A:us=\2334m:vb=\233?5h\233?5l:ve=\233?25h:\
-	:vi=\233?25l:
-
-xterm-hp|XFree86 xterm with hpterm function keys:\
-	:@7=\EF:k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:\
-	:k8=\Ew:kC=\EJ:kD=\EP:kI=\EQ:kN=\ES:kP=\ET:kd=\EB:kh=\Eh:\
-	:kl=\ED:kr=\EC:ku=\EA:tc=xterm-basic:
-
-xterm-sco|XFree86 xterm with SCO function keys:\
-	:@7=\E[F:F1=\E[W:F2=\E[X:F3=\E[Y:F5=\E[a:F6=\E[b:F7=\E[c:\
-	:F8=\E[d:F9=\E[e:FA=\E[f:FB=\E[g:FC=\E[h:FD=\E[i:FE=\E[j:\
-	:FF=\E[k:FG=\E[l:FH=\E[m:FI=\E[n:FJ=\E[o:FK=\E[p:FL=\E[q:\
-	:FM=\E[r:FN=\E[s:FO=\E[t:FP=\E[u:k1=\E[M:k2=\E[N:k3=\E[O:\
-	:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:k;=\E[V:\
-	:kI=\E[L:kN=\E[G:kP=\E[I:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\
-	:ku=\E[A:tc=xterm-basic:
-
-# The xterm-xfree86 description has all of the features, but is not completely
-# compatible with vt220.  If you are using a Sun or PC keyboard, set the
-# sunKeyboard resource to true:
-#	+ maps the editing keypad
-#	+ interprets control-function-key as a second array of keys, so a
-#	  12-fkey keyboard can support vt220's 20-fkeys.
-#	+ maps numeric keypad "+" to ",".
-#	+ uses DEC-style control sequences for the application keypad.
-#
-xterm-vt220|XFree86 xterm emulating vt220:\
-	:@1=\EOu:@7=\E[4~:@8=\EOM:F1=\E[23~:F2=\E[24~:F3=\E[25~:\
-	:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:\
-	:F9=\E[33~:FA=\E[34~:K1=\EOw:K3=\EOy:K4=\EOq:K5=\EOs:\
-	:Km=\E[M:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[15~:\
-	:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
-	:kB=\E[Z:kI=\E[2~:kN=\E[6~:kP=\E[5~:kd=\EOB:kh=\E[1~:\
-	:kl=\EOD:kr=\EOC:ku=\EOA:tc=xterm-basic:
-
-xterm-vt52|XFree86 xterm emulating dec vt52:\
-	:co#80:it#8:li#24:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=\EG:as=\EF:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :\
-	:cr=^M:do=\EB:ho=\EH:kb=^H:kd=\EB:kl=\ED:kr=\EC:ku=\EA:\
-	:le=\ED:nd=\EC:nw=^M^J:sf=^J:sr=\EI:ta=^I:up=\EA:
-
-xterm-noapp|xterm with cursor keys in normal mode:\
-	:kd=\E[B:ke=\E>:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:te@:ti@:\
-	:tc=xterm:
-
-xterm-24|vs100|xterms|xterm terminal emulator (X Window System):\
-	:li#24:tc=xterm-r6:
-
-# This is xterm for ncurses.
-xterm|xterm terminal emulator (X Window System):\
-	:tc=xterm-r6:
-#	use=xterm-xfree86,
-
-# These entries allow access to the X titlebar and icon name as a status line.
-# Note that twm (and possibly window managers descended from it such as tvtwm,
-# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
-# with it.
-xterm+sl|access X title line and icon name:\
-	:hs:\
-	:ws#40:\
-	:ds=\E]0;\007:fs=^G:ts=\E]0;:tc=xterm:
-xterm+sl-twm|access X title line (pacify twm-descended window managers):\
-	:hs:\
-	:ws#40:\
-	:ds=\E]2;\007:fs=^G:ts=\E]2;:tc=xterm:
-
-#
-# The following xterm variants don't depend on your base version
-#
-# xterm with bold instead of underline
-xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold:\
-	:so=\E[7m:us=\E[1m:tc=xterm:
-# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
-# (kterm should not invoke DEC Graphics as the alternate character set
-#  -- Kenji Rikitake)
-# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
-#  -- MATSUMOTO Shoji)
-kterm|kterm kanji terminal emulator (X window system):\
-	:es:hs:\
-	:Km=\E[M:\
-	:ac=++,,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=\E(B:as=\E(0:cs=\E[%i%d;%dr:ds=\E[?H:eA=:fs=\E[?F:\
-	:rc=\E8:sc=\E7:ts=\E[?E\E[?%i%dT:tc=xterm-r6:\
-	:tc=ecma+color:
-kterm-color|kterm-co|kterm with ANSI colors:\
-	:NC@:tc=kterm:tc=ecma+color:
-# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
-xterm-nic|xterm with ich/ich1 suppressed for non-curses programs:\
-	:IC@:ei=:ic@:im=:tc=xterm:
-# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
-xterm1|xterm terminal emulator ignoring the alternate screen buffer:\
-	:te@:ti@:tc=xterm:
-
-# This describes the capabilities of color_xterm, an xterm variant from
-# before ECMA-64 color support was folded into the main-line xterm release.
-# This entry is straight from color_xterm's maintainer.
-# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
-# The README's with the distribution also say that it supports SGR 21, 24, 25
-# and 27, but they are not present in the terminfo or termcap.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-color_xterm|cx|cx100|color_xterm color terminal emulator for X:\
-	:am:bs:km:mi:ms:xn:\
-	:NC@:co#80:it#8:li#65:\
-	:@7=\E[8~:@8=\EOM:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
-	:F1=\E[23~:F2=\E[24~:IC=\E[%d@:K1=\EOw:K2=\EOu:K3=\EOy:\
-	:K4=\EOq:K5=\EOs:Km=\E[M:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:\
-	:SA=\E[?7h:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ei=\E[4l:ho=\E[H:\
-	:i1=\E[r\E[m\E[?7h\E[?4;6l\E[4l:im=\E[4h:k1=\E[11~:\
-	:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:\
-	:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kI=\E[2~:\
-	:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:kh=\E[7~:kl=\EOD:kr=\EOC:\
-	:ku=\EOA:le=^H:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
-	:r1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<:\
-	:rc=\E8:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\
-	:te=\E>\E[?41;1r:ti=\E[?1;41s\E[?1;41h\E=:ue=\E[24m:\
-	:up=\E[A:us=\E[4m:tc=ecma+color:
-
-# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
-# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
-# SGR 39 or 49.  SGR 0 does reset colors (along with everything else).  This
-# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
-# that each of those implements the home, end, delete keys differently.
-#
-# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
-# colors; note that this is not compatible with the 5.2 version.
-nxterm|xterm-color|generic color xterm:\
-	:NC@:\
-	:op=\E[m:tc=xterm-r6:tc=klone+color:
-
-# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
-gnome-rh62|Gnome terminal:\
-	:ut:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kD=\177:tc=xterm-color:
-
-# GNOME Terminal 1.4.0.4 (Redhat 7.2)
-#
-# This implements a subset of vt102 with a random selection of features from
-# other terminals such as color and function-keys.
-#
-# shift-f1 to shift-f10 are f11 to f20
-#
-# NumLock changes the application keypad to approximate vt100 keypad, except
-# that there is no escape sequence matching comma (,).
-#
-# Other defects observed:
-#	vt100 LNM mode is not implemented.
-#	vt100 80/132 column mode is not implemented.
-#	vt100 DECALN is not implemented.
-#	vt100 DECSCNM mode is not implemented, so flash does not work.
-#	vt100 TBC (tab reset) is not implemented.
-#	xterm alternate screen controls do not restore cursor position properly
-#	it hangs in tack after running function-keys test.
-gnome-rh72|GNOME Terminal:\
-	:ut:\
-	:RA=\E[?7l:SA=\E[?7h:ct@:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
-	:kD=\E[3~:\
-	:..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;:\
-	:ve=\E[?25h:vi=\E[?25l:tc=xterm-color:
-
-gnome|GNOME Terminal:\
-	:tc=gnome-rh72:
-
-# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
-# or not is debatable).
-kvt|KDE terminal:\
-	:km@:ut:\
-	:@7=\E[F:kD=\177:kh=\E[H:tc=xterm-color:
-
-# Konsole 1.0.1
-# (formerly known as kvt)
-#
-# This program hardcodes $TERM to 'xterm', which is not accurate.  However, to
-# simplify this entry (and point out why konsole isn't xterm), we base this on
-# xterm-r6.  The default keyboard appears to be 'linux'.
-#
-# Notes:
-# a) konsole implements several features from XFree86 xterm, though none of
-#    that is documented - except of course in its source code - apparently
-#    because its implementors are unaccustomed to reading documentation - as
-#    evidenced by the sparse and poorly edited documentation distributed with
-#    konsole.  Some features such as the 1049 private mode are recognized but
-#    incorrectly implemented as a duplicate of the 47 private mode.
-# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
-#    sends PC-style escapes rather than vt100.
-# c) fails vttest menu 3 (Test of character sets) because it does not properly
-#    parse some control sequences.  Also fails vttest Primary Device Attributes
-#    by sending a bogus code (in the source it says it's supposed to be a
-#    vt220, which is doubly incorrect because it does not implement vt220
-#    control sequences except for a few special cases).  Treat it as a
-#    mildly-broken vt102.
-konsole-base|KDE console window:\
-	:NP:km@:ut:\
-	:*6@:@0@:@7@:F1@:F2@:F3@:F4@:F5@:F6@:F7@:F8@:F9@:FA@:RA=\E[?7l:\
-	:SA=\E[?7h:bl@:ch=\E[%i%dG:cv=\E[%i%dd:ec=\E[%dX:k1@:k2@:\
-	:k3@:k4@:k5@:k6@:k7@:k8@:k9@:k;@:kD@:kb@:kh@:mb=\E[5m:\
-	:..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;:\
-	:se=\E[27m:ue=\E[24m:vb=\E[?5h\E[?5l:ve=\E[?25h:\
-	:vi=\E[?25l:tc=ecma+color:tc=xterm-r6:
-konsole-linux|KDE console window with linux keyboard:\
-	:F1=\E[23~:F2=\E[24~:F3@:F4@:F5@:F6@:F7@:F8@:F9@:FA@:k1=\E[[A:\
-	:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:k7=\E[18~:\
-	:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:tc=konsole-base:
-# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
-# than testing the code.
-konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm:\
-	:@7=\E[4~:kh=\E[1~:tc=konsole-vt100:
-# The value for kbs reflects local customization rather than the settings used
-# for XFree86 xterm.
-konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm:\
-	:@7=\EOF:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kh=\EOH:\
-	:tc=konsole-vt100:
-# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
-# it is still useful for deriving the other entries.
-konsole-vt100|KDE console window with vt100 (sic) keyboard:\
-	:@7=\E[F:F1=\E[23~:F2=\E[24~:F3@:F4@:F5@:F6@:F7@:F8@:F9@:FA@:\
-	:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
-	:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
-	:kD=\E[3~:kb=\177:kh=\E[H:tc=konsole-base:
-konsole-vt420pc|KDE console window with vt420 pc keyboard:\
-	:kD=\177:kb=^H:tc=konsole-vt100:
-konsole-16color|klone of xterm-16color:\
-	:Co#16:NC#32:pa#256:\
-	:..AB=\E[%?%p1%{8}%<%t%p1%'('%+%e%p1%{92}%+%;%dm:\
-	:..AF=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%'R'%+%;%dm:\
-	:..Sb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m':\
-	:..Sf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m':\
-	:tc=konsole:
-# make a default entry for konsole
-konsole|KDE console window:\
-	:tc=konsole-linux:
-
-# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
-# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
-# Notes:
-# rxvt 2.21b uses
-#	smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
-# but some applications don't work with that.
-# It also has an AIX extension
-#	box2=lqkxjmwuvtn,
-# and
-#	ech=\E[%p1%dX,
-# but the latter does not work correctly.
-#
-# The distributed terminfo says it implements hpa and vpa, but they are not
-# implemented correctly, using relative rather than absolute positioning.
-#
-# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
-# Since rxvt is not really compatible with xterm, it should be configured as
-# "rxvt" (monochrome) and "rxvt-color".
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-rxvt-basic|rxvt terminal base (X Window System):\
-	:am:bs:eo:km:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:\
-	:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:\
-	:ho=\E[H:i1=\E[?47l\E=\E[?1l:ic=\E[@:im=\E[4h:\
-	:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\
-	:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
-	:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
-	:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:ke=\E>:kh=\E[7~:\
-	:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:\
-	:me=\E[0m\017:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:\
-	:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=\E[2J\E[?47l\E8:\
-	:ti=\E7\E[?47h:ue=\E[24m:up=\E[A:us=\E[4m:\
-	:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:
-rxvt|rxvt terminal emulator (X Window System):\
-	:NC@:\
-	:me=\E[m\017:tc=rxvt-basic:tc=ecma+color:
-
-# From: Michael Jennings <mej@valinux.com>
-# removed kf0 which conflicts with kf10 -TD
-# remove cvvis which conflicts with cnorm -TD
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-Eterm|Eterm-color|Eterm with xterm-style color support (X Window System):\
-	:am:bw:eo:km:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:lm#0:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:K1=\E[7~:K2=\EOu:K3=\E[5~:K4=\E[8~:K5=\E[6~:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:\
-	:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:\
-	:ec=\E[%dX:ei=\E[4l:ho=\E[H:i1=\E[?47l\E>\E[?1l:ic=\E[@:\
-	:im=\E[4h:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\
-	:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
-	:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
-	:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:ke=:kh=\E[7~:\
-	:kl=\E[D:kr=\E[C:ks=:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:\
-	:me=\E[m\017:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:\
-	:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=\E[2J\E[?47l\E8:\
-	:ti=\E7\E[?47h:ue=\E[24m:up=\E[A:us=\E[4m:\
-	:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:tc=ecma+color:
-
-# These (xtermc and xtermm) are distributed with Solaris.  They refer to a
-# variant of xterm which is apparently no longer supported, but are interesting
-# because they illustrate SVr4 curses mouse controls - T.Dickey
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-xtermm|xterm terminal emulator (monocrome):\
-	:am:bs:km:mi:ms:xn:\
-	:BT#3:co#80:it#8:li#24:\
-	:@7=\E[Y:@8=\EOM:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
-	:F1=\EOZ:F2=\EOA:Gm=\E[%dY:IC=\E[%d@:K1=\EOq:K2=\EOr:\
-	:K3=\EOs:K4=\EOp:K5=\EOn:Km=\E[^_:LE=\E[%dD:RI=\E[%dC:\
-	:RQ=\E[492Z:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ei=:ho=\E[H:\
-	:ic=\E[@:im=:k0=\EOy:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
-	:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:k;=\EOY:kN=\E[U:\
-	:kP=\E[V:kb=^H:kd=\EOB:kh=\E[H:kl=\EOD:kr=\EOC:ku=\EOA:\
-	:le=\E[1D:mb@:md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:\
-	:r1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H:\
-	:r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:sc=\E7:\
-	:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=\E@0\E[?4r:\
-	:ti=\E@0\E[?4s\E[?4h\E@1:up=\E[A:
-
-xtermc|xterm terminal emulator (color):\
-	:Co#8:NC#7:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:\
-	:..Sb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m:\
-	:..Sf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m:\
-	:op=\E[100m:tc=xtermm:
-
-# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
-# Here's a termcap entry I've been using for xterm_color, which comes
-# with BSD/OS 2.0, and the X11R6 contrib tape too I think.  Besides the
-# color stuff, I also have a status line defined as the window manager
-# title bar. [I have translated it to terminfo -- ESR]
-xterm-pcolor|xterm with color used for highlights and status line:\
-	:md=\E[1m\E[43m:mr=\E[7m\E[34m:so=\E[7m\E[31m:\
-	:us=\E[4m\E[42m:tc=xterm+sl:tc=xterm-r6:
-
-# HP ships this, except for the pb#9600 which was merged in from BSD termcap.
-# (hpterm: added empty <acsc>, we have no idea what ACS chars look like --esr)
-hpterm|X-hpterm|hp X11 terminal emulator:\
-	:am:da:db:mi:xs:\
-	:Nl#8:co#80:lh#2:li#24:lm#0:lw#8:pb#9600:sg#0:ug#0:\
-	:LF=\E&j@:LO=\E&jB:ac=:ae=^O:al=\EL:as=^N:bl=^G:bt=\Ei:\
-	:cd=\EJ:ce=\EK:ch=\E&a%dC:cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:\
-	:cr=^M:ct=\E3:cv=\E&a%dY:dc=\EP:dl=\EM:do=\EB:ei=\ER:im=\EQ:\
-	:k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:\
-	:kA=\EL:kC=\EJ:kD=\EP:kE=\EK:kF=\ES:kH=\EF:kI=\EQ:kL=\EM:\
-	:kM=\ER:kN=\EU:kP=\EV:kR=\ET:kS=\EJ:kT=\E1:ka=\E3:kb=^H:\
-	:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:\
-	:ku=\EA:le=^H:md=\E&dB:me=\E&d@:mh=\E&dH:ml=\El:mr=\E&dB:\
-	:mu=\Em:nd=\EC:..pk=\E&f%p1%dk%p2%l%dL%p2%s:\
-	:..pl=\E&f1a%p1%dk%p2%l%dL%p2%s:\
-	:..pn=\E&f%p1%dk%p2%l%dd0L%p2%s:\
-	:..px=\E&f2a%p1%dk%p2%l%dL%p2%s:\
-	:..sa=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;:\
-	:se=\E&d@:sf=^J:so=\E&dJ:sr=\ET:st=\E1:ta=^I:ue=\E&d@:\
-	:up=\EA:us=\E&dD:
-
-# This entry describes an xterm with Sun-style function keys enabled
-# via the X resource setting "xterm*sunFunctionKeys:true"
-# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
-# The <kf13>...<kf20> keys are L3-L10.  We don't set <kf16=\E[197z>
-# because we want it to be seen as <kcpy>.
-# The <kf31>...<kf45> keys are R1-R15.  We treat some of these in accordance
-# with their Sun keyboard labels instead.
-# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
-xterm-sun|xterm with sunFunctionKeys true:\
-	:%1=\E[196z:&8=\E[195z:@0=\E[200z:@5=\E[197z:@7=\E[220z:\
-	:F1=\E[192z:F2=\E[193z:F3=\E[194z:F4=\E[195z:F5=\E[196z:\
-	:F7=\E[198z:F8=\E[199z:F9=\E[200z:FA=\E[201z:FL=\E[208z:\
-	:FM=\E[209z:FN=\E[210z:FO=\E[211z:FP=\E[212z:FQ=\E[213z:\
-	:FS=\E[215z:FU=\E[217z:FW=\E[219z:FY=\E[221z:K2=\E[218z:\
-	:k1=\E[224z:k2=\E[225z:k3=\E[226z:k4=\E[227z:k5=\E[228z:\
-	:k6=\E[229z:k7=\E[230z:k8=\E[231z:k9=\E[232z:k;=\E[233z:\
-	:kI=\E[2z:kN=\E[222z:kP=\E[216z:kh=\E[214z:tc=xterm:
-xterms-sun|small (80x24) xterm with sunFunctionKeys true:\
-	:co#80:li#24:tc=xterm-sun:
-
-# This is for the extensible terminal emulator on the X11R6 contrib tape.
-emu|emu native mode:\
-	:mi:ms:xo:\
-	:Co#15:co#80:it#8:li#24:pa#64:vt#200:\
-	:*6=\Esel:@0=\Efind:@8=^M:AB=\Es%i%d;:AF=\Er%i%d;:\
-	:AL=\EQ%d;:DC=\EI%d;:DL=\ER%d;:DO=\Ep%d;:F1=\EF11:\
-	:F2=\EF12:F3=\EF13:F4=\EF14:F5=\EF15:F6=\EF16:F7=\EF17:\
-	:F8=\EF18:F9=\EF19:FA=\EF20:LE=\Eq-%d;:RI=\Eq%d;:\
-	:UP=\Ep-%d;:\
-	:ac=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244:\
-	:ae=\0:al=\EQ1;:as=\0:bl=^G:cb=\EL:cd=\EN:ce=\EK:\
-	:cl=\EP\EE0;0;:cm=\EE%d;%d;:cr=^M:cs=\Ek%d;%d;:ct=\Ej:\
-	:dc=\EI1;:dl=\ER1;:do=\EB:eA=\0:ec=\Ej%d;:ei=\EX:\
-	:ho=\EE0;0;:im=\EY:is=\ES\Er0;\Es0;:k0=\EF00:k1=\EF01:\
-	:k2=\EF02:k3=\EF03:k4=\EF04:k5=\EF05:k6=\EF06:k7=\EF07:\
-	:k8=\EF08:k9=\EF09:k;=\EF10:kD=\177:kI=\Eins:kN=\Enext:\
-	:kP=\Eprior:kb=^H:kd=\EB:kl=\EC:kr=\ED:ku=\EA:le=^H:\
-	:mb=\ES\EW:md=\ES\EU:me=\ES:mr=\ES\ET:nd=\ED:\
-	:oc=\Es0;\Er0;:rs=\ES\Es0;\Er0;:se=\ES:sf=\EG:so=\ES\ET:\
-	:sr=\EF:st=\Eh:ta=^I:ue=\ES:up=\EA:us=\ES\EV:ve=\Ea:vi=\EZ:
-
-#### MGR
-#
-# MGR is a Bell Labs window system lighter-weight than X.
-# These entries describe MGR's xterm-equivalent.
-# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
-#
-
-mgr|Bellcore MGR (non X) window system terminal emulation:\
-	:am:km:\
-	:AL=\E%da:DC=\E%dE:DL=\E%dd:IC=\E%dA:RA=\E5S:SA=\E5s:\
-	:al=\Ea:bl=^G:cd=\EC:ce=\Ec:cl=^L:cm=\E%r%d;%dM:cr=^M:\
-	:cs=\E%d;%dt:dc=\EE:dl=\Ed:do=\Ef:ei=:hd=\E1;2f:hu=\E1;2u:\
-	:ic=\EA:im=:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
-	:md=\E2n:me=\E0n:mr=\E1n:nd=\Er:nw=^M^J:se=\E0n:sf=^J:\
-	:so=\E1n:ta=^I:ue=\E0n:up=\Eu:us=\E4n:ve=\Eh:vi=\E9h:\
-	:vs=\E0h:
-mgr-sun|Mgr window with Sun keyboard:\
-	:%1=\E[207z:%6=\E[198z:&8=\E[195z:@0=\E[200z:@5=\E[197z:\
-	:@7=\E[220z:@8=\E[250z:F1=\E[234z:F2=\E[235z:K1=\E[214z:\
-	:K2=\E[218z:K3=\E[216z:K4=\E[220z:K5=\E[222z:k1=\E[224z:\
-	:k2=\E[225z:k3=\E[226z:k4=\E[227z:k5=\E[228z:k6=\E[229z:\
-	:k7=\E[230z:k8=\E[231z:k9=\E[232z:k;=\E[233z:kN=\E[222z:\
-	:kP=\E[216z:kh=\E[214z:tc=mgr:
-mgr-linux|Mgr window with Linux keyboard:\
-	:@7=\E[4~:F1=\E[23~:F2=\E[24~:K1=\E[H:K2=\E[G:K3=\E[5~:\
-	:K4=\E[Y:K5=\E[6~:k0=\E[[J:k1=\E[[A:k2=\E[[B:k3=\E[[C:\
-	:k4=\E[[D:k5=\E[[E:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
-	:k9=\E[20~:k;=\E[21~:kD=\E[3~:kN=\E[6~:kP=\E[5~:kh=\E[1~:\
-	:tc=mgr:
-
-######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
-#
-
-# Columbus UNIX virtual terminal. This terminal also appears in
-# UNIX 4.0 and successors as line discipline 1 (?), but is
-# undocumented and does not really work quite right.
-cbunix|cb unix virtual terminal:\
-	:am:bs:da:db:\
-	:co#80:li#24:lm#0:\
-	:al=\EP:bl=^G:cd=\EL:ce=\EK:cl=\EL:cm=\EG%r%.%.:cr=^M:\
-	:dc=\EM:dl=\EN:do=^J:ei=:ic=\EO:im=:kd=\EB:kh=\EE:kl=\ED:\
-	:kr=\EC:ku=\EA:le=^H:nd=\EC:se=\Eb^D:sf=^J:so=\Ea^D:\
-	:ue=\Eb^A:up=\EA:us=\Ea^A:
-# (vremote: removed obsolete ":nl@:" -- esr)
-vremote|virtual remote terminal:\
-	:am@:\
-	:co#79:tc=cbunix:
-
-pty|4bsd pseudo teletype:\
-	:cm=\EG%+ %+ :se=\Eb$:so=\Ea$:ue=\Eb!:us=\Ea!:tc=cbunix:
-
-# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
-eterm|gnu emacs term.el terminal emulation:\
-	:am:mi:xn:\
-	:co#80:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cb=\E[1K:\
-	:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\
-	:im=\E[4h:le=^H:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:se=\E[m:\
-	:sf=^J:so=\E[7m:ta=^I:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:\
-	:ue=\E[m:up=\E[A:us=\E[4m:
-
-# Entries for use by the `screen' program by Juergen Weigert,
-# Michael Schroeder, Oliver Laumann.  The screen and
-# screen-w entries came with version 3.7.1.  The screen2 and screen3 entries
-# come from University of Wisconsin and may be older.
-# (screen: added :ve: on ANSI model -- esr)
-#
-# 'screen' defines extensions to termcap.  Some are used in its terminal
-# description:
-#      G0   (bool)  Terminal can deal with ISO 2022  font  selection sequences.
-#      AX   (bool)  Does  understand ANSI set default fg/bg color
-#                   (\E[39m / \E[49m).
-#      S0   (str)   Switch charset 'G0' to the specified charset.
-#      E0   (str)   Switch charset 'G0' back to standard charset.
-#
-# tested with screen 3.09.08
-screen|VT 100/ANSI X3.64 virtual terminal:\
-	:am:bs:km:mi:ms:pt:xn:G0:\
-	:Co#8:co#80:it#8:li#24:pa#64:\
-	:@7=\E[4~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
-	:F1=\E[23~:F2=\E[24~:IC=\E[%d@:Km=\E[M:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:\
-	:ac=++,,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ei=\E[4l:\
-	:ho=\E[H:im=\E[4h:is=\E)0:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
-	:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
-	:k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:\
-	:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:kl=\EOD:kr=\EOC:\
-	:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
-	:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:rs=\Ec:sc=\E7:se=\E[23m:\
-	:sf=^J:so=\E[3m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\EM:\
-	:us=\E[4m:vb=\Eg:ve=\E[34h\E[?25h:vi=\E[?25l:vs=\E[34l:\
-	:E0=\E(B:S0=\E(%p1%c:tc=ecma+color:
-
-# Read the fine manpage:
-#       When  screen  tries  to  figure  out  a  terminal name for
-#       itself, it first looks for an entry named "screen.<term>",
-#       where  <term>  is the contents of your $TERM variable.  If
-#       no such entry exists, screen tries "screen" (or "screen-w"
-#       if the terminal is wide (132 cols or more)).  If even this
-#       entry cannot be found, "vt100" is used as a substitute.
-#
-# Here are a few customized entries which are useful -TD
-#
-# Notes:
-# (a)	screen does not support invis.
-# (b)	screen's implementation of bw is incorrect according to tack.
-# (c)	screen appears to hardcode the strings for khome/kend, making it
-#	necessary to override the "use=" clause's values.
-# (d)	screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
-#	which is NOT the same as the terminfo screen.<term>.
-# (e)	when screen finds one of these customized entries, it sets $TERM to
-#	match.  Hence, no "screen.xterm" entry is provided, since that would
-#	create heartburn for people running remote xterm's.
-#
-#	xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
-#	since the default translations override the built-in keycode
-#	translation.  They are suppressed here to show what is tested by tack.
-screen.xterm-xfree86|screen customized for XFree86 xterm:\
-	:bw:ut@:\
-	:#3@:%c@:%e@:@7=\E[4~:kh=\E[1~:mk@:ml@:mu@:\
-	:..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;:\
-	:tc=xterm-xfree86:
-# xterm-r6 does not really support khome/kend unless it is propped up by
-# the translations resource.
-screen.xterm-r6|screen customized for X11R6 xterm:\
-	:bw:tc=xterm-r6:
-# Color applications running in screen and TeraTerm do not play well together
-# on Solaris.
-screen.teraterm|disable ncv in teraterm:\
-	:NC#127:tc=screen:
-
-screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols:\
-	:co#132:tc=screen:
-
-screen2|old VT 100/ANSI X3.64 virtual terminal:\
-	:co#80:it#8:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bt=\E[Z:cd=\E[J:\
-	:ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
-	:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ic=:im=\E[4h:k0=\E~:\
-	:k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:\
-	:k9=\E0I:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:\
-	:me=\E[m:nd=\E[C:nw=^M^J:r1=\Ec:rc=\E8:sc=\E7:se=\E[23m:\
-	:sf=^J:so=\E[3m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\E[A:\
-	:us=\E[4m:
-# (screen3: removed unknown ":xv:LP:G0:" -- esr)
-screen3|older VT 100/ANSI X3.64 virtual terminal:\
-	:km:mi:ms:\
-	:co#80:it#8:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:\
-	:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:\
-	:ho=\E[H:im=\E[4h:is=\E)0:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
-	:kb=^H:kd=\EOB:ke=\E>:kl=\EOD:kr=\EOC:ks=\E=:ku=\EOA:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:r1=\Ec:\
-	:rc=\E8:sc=\E7:se=\E[23m:sf=^J:so=\E[3m:sr=\EM:st=\EH:ta=^I:\
-	:ue=\E[24m:up=\EM:us=\E[4m:
-
-# Francesco Potorti <F.Potorti@cnuce.cnr.it>:
-# NCSA telnet is one of the most used telnet clients for the Macintosh.  It has
-# been maintained until recently by the National Center for Supercomputer
-# Applications, and it is feature rich, stable and free.  It can be downloaded
-# from www.ncsa.edu.  This terminfo description file is based on xterm-vt220,
-# xterm+sl, and the docs at NCSA.  It works well.
-#
-# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
-# The terminal options should be set as follows:
-#         Xterm sequences ON
-#         use VT wrap mode ON
-#         use Emacs arrow keys OFF
-#         CTRL-COMND is Emacs meta ON
-#         8 bit mode ON
-#         answerback string: "ncsa-vt220-8"
-#         setup keys: all disabled
-#
-# Application mode is not used.
-#
-# Other special mappings:
-#	Apple		VT220
-#	HELP 		Find
-#	HOME		Insert here
-#	PAGEUP		Remove
-#	DEL		Select
-#	END		Prev Screen
-#	PAGEDOWN	Next Screen
-#
-# Though it supports ANSI color, NCSA Telnet uses color to represent blinking
-# text.
-#
-# The status-line manipulation is a mapping of the xterm-compatible control
-# sequences for setting the window-title.  So you must use tsl and fsl in
-# pairs, since the latter ends the string that is loaded to the window-title.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode:\
-	:am:hs:km:mi:ms:xn:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\
-	:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
-	:ds=\E]0;\007:ei=\E[4l:fs=^G:ho=\E[H:\
-	:if=/usr/share/tabset/vt100:im=\E[4h:\
-	:is=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>:k1=\E[17~:\
-	:k2=\E[18:k3=\E[19~:k4=\E[20~:k5=\E[21~:k6=\E[23~:\
-	:k7=\E[24~:k8=\E[25~:k9=\E[26~:kD=\E[4~:kN=\E[6~:kP=\E[3~:\
-	:kb=^H:kd=\E[B:kh=\E[2~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:rc=\E8:\
-	:rs=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>:sc=\E7:\
-	:se=\E[27m:sf=\n:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=\E[2J\E8:\
-	:ti=\E7:ts=\E]0;:ue=\E[24m:up=\E[A:us=\E[4m:\
-	:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:
-ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode:\
-	:tc=ncsa-m:tc=klone+color:
-ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode:\
-	:hs@:\
-	:ds@:fs@:ts@:tc=ncsa:
-ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode:\
-	:hs@:\
-	:ds@:fs@:ts@:tc=ncsa-m:
-# alternate -TD:
-# The documented function-key mapping refers to the Apple Extended Keyboard
-# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6).  We use the VT220-style
-# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
-# some keyboards and many applications require these as F1-F4.
-#
-ncsa-vt220|NCSA Telnet using vt220-compatible function keys:\
-	:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
-	:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
-	:k8=\E[19~:k9=\E[20~:k;=\E[21~:tc=ncsa:
-
-#### Pilot Pro Palm-Top
-#
-# Termcap for Top Gun Telnet and SSH on the Palm Pilot.
-# http://www.isaac.cs.berkeley.edu/pilot/tgtelnet.html
-pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional:\
-	:am:bs:xn:\
-	:co#39:li#16:\
-	:bl=^G:cl=\Ec:cm=\Em%+ %+ :cr=^M:do=^J:ho=\Em\s\s:kN=^L:\
-	:kP=^K:kb=^H:kd=^J:kl=^H:le=^H:nw=\Em~\s:se=\EB:sf=^J:so=\Eb:\
-	:ta=^I:
-
-# From: Federico Bianchi <bianchi@www.arte.unipi.it>
-# These entries are for the Embeddable Linux Kernel System (ELKS)
-# project - an heavily stripped down Linux to be run on 16 bit
-# boxes or, eventually, to be used in embedded systems - and have been
-# adapted from the stock ELKS termcap. The project itself looks stalled,
-# and the latest improvements I know of date back to March 2000.
-#
-# To cope with the ELKS dumb console I added an "elks-glasstty" entry;
-# as an added bonus, this deals with all the capabilities common to
-# both VT52 and ANSI (or, eventually, "special") modes.
-
-elks-glasstty|ELKS glass-TTY capabilities:\
-	:am:bs:\
-	:co#80:it#8:li#25:\
-	:bl=^G:cr=^M:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:
-
-elks-vt52|ELKS vt52 console:\
-	:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :do=\EB:ho=\EH:le=\ED:nd=\EC:\
-	:up=\EA:tc=elks-glasstty:
-
-elks-ansi|ELKS ANSI console:\
-	:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:do=\E[B:ho=\E[H:\
-	:le=\E[D:nd=\E[C:se=\E[m:so=\E[7m:up=\E[A:\
-	:tc=elks-glasstty:
-
-# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
-# instead of VT52, but the "elks" entry still refers to the latter.
-
-elks|default ELKS console:\
-	:tc=elks-vt52:
-
-# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
-# one but in screen size
-
-sibo|ELKS SIBO console:\
-	:co#61:it#8:li#20:tc=elks-vt52:
-
-######## COMMERCIAL WORKSTATION CONSOLES
-#
-
-#### Alpha consoles
-#
-
-# This is from the OSF/1 Release 1.0 termcap file
-pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation:\
-	:am:xo:\
-	:co#80:li#25:\
-	:al=\E[L:bl=^G:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
-	:dc=\E[P:dl=\E[M:do=^J:ei=:ho=\E[H:ic=\E[@:im=:kb=^H:kd=\E[B:\
-	:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:mr=\E[7m:\
-	:nd=\E[C:nw=^M^J:se=\E[m:so=\E[7m:ta=^I:up=\E[A:
-
-#### Sun consoles
-#
-
-# :is1: resets scrolling region in case a previous user had used "tset vt100"
-oldsun|Sun Microsystems Workstation console:\
-	:am:bs:km:mi:ms:\
-	:co#80:it#8:li#34:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:al=\E[L:bl=^G:\
-	:cd=\E[J:ce=\E[K:cl=^L:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:\
-	:dl=\E[M:do=\E[B:ei=:i1=\E[1r:ic=\E[@:im=:k1=\EOP:k2=\EOQ:\
-	:k3=\EOR:k4=\EOS:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
-	:le=^H:me=\E[m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:ta=^I:up=\E[A:
-# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
-# :li: capability later corrected by J.T. Conklin <jtc@cygnus.com>
-# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
-sun-il|Sun Microsystems console with working insert-line:\
-	:am:km:ms:\
-	:co#80:li#34:\
-	:%7=\E[194z:&5=\E[193z:&8=\E[195z:@7=\E[220z:AL=\E[%dL:\
-	:DC=\E[%dP:DL=\E[%dM:F1=\E[234z:F2=\E[235z:IC=\E[%d@:\
-	:K2=\E[218z:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=^L:\
-	:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=:ic=\E[@:im=:\
-	:k1=\E[224z:k2=\E[225z:k3=\E[226z:k4=\E[227z:k5=\E[228z:\
-	:k6=\E[229z:k7=\E[230z:k8=\E[231z:k9=\E[232z:k;=\E[233z:\
-	:kD=\177:kN=\E[222z:kP=\E[216z:kb=^H:kd=\E[B:kh=\E[214z:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:md@:me=\E[m:mr=\E[7m:nd=\E[C:\
-	:rs=\E[s:\
-	:..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m:\
-	:se=\E[m:sf=^J:so=\E[7m:ta=^I:u8=\E[1t:u9=\E[11t:ue@:\
-	:up=\E[A:us@:
-# On some versions of CGSIX framebuffer firmware (SparcStation 5), :al:/:AL:
-# flake out on the last line.  Unfortunately, without them the terminal has no
-# way to scroll.
-sun-cgsix|sun-ss5|Sun SparcStation 5 console:\
-	:AL@:al@:tc=sun-il:
-# If you are using an SS5, change the sun definition to use sun-ss5.
-sun|sun1|sun2|Sun Microsystems Inc. workstation console:\
-	:tc=sun-il:
-
-# From: <john@ucbrenoir>  Tue Sep 24 13:14:44 1985
-sun-s|Sun Microsystems Workstation window with status line:\
-	:hs:\
-	:ds=\E]l\E\\:fs=\E\\:ts=\E]l:tc=sun:
-sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs:\
-	:hs:\
-	:ds=\E]l\E\\:fs=\E\\:ts=\E]l:tc=sun-e:
-sun-48|Sun 48-line window:\
-	:co#80:li#48:tc=sun:
-sun-34|Sun 34-line window:\
-	:co#80:li#34:tc=sun:
-sun-24|Sun 24-line window:\
-	:co#80:li#24:tc=sun:
-sun-17|Sun 17-line window:\
-	:co#80:li#17:tc=sun:
-sun-12|Sun 12-line window:\
-	:co#80:li#12:tc=sun:
-sun-1|Sun 1-line window for sysline:\
-	:es:hs:\
-	:co#80:li#1:\
-	:ds=^L:fs=\E[K:ts=^M:tc=sun:
-sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character:\
-	:ei@:ic@:im@:tc=sun:
-sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history:\
-	:li#35:\
-	:te=\E[>4h:ti=\E[>4l:tc=sun:
-
-#### Iris consoles
-#
-
-# (wsiris: this had extension capabilities
-#	:HS=\E7F2:HE=\E7F7:\
-#	:CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
-# See the note on Iris extensions near the end of this file.
-# Finally, removed suboptimal :cl:=\EH\EJ and added :do: &
-# :vb: from BRL -- esr)
-wsiris|iris40|iris emulating a 40 line visual 50 (approximately):\
-	:am:bs:nc:pt:\
-	:co#80:it#8:kn#3:li#40:\
-	:al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\Ev:cm=\EY%+ %+ :dl=\EM:\
-	:do=\EB:ho=\EH:is=\E7B0\E7F7\E7C2\E7R3:k0=\E0:k1=\E1:\
-	:k2=\E2:k3=\E3:k4=\E4:k5=\E5:k6=\E6:k7=\E7:k8=\E8:k9=\E9:\
-	:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:me=\E7F7:mh=\E7F2:nd=\EC:\
-	:nl=\EB:se=\E0@:sf=^J:so=\E9P:sr=\EI:ta=^I:ue=\E7R3\E0@:\
-	:up=\EA:us=\E7R2\E9P:vb=\E7F4\E7B1\013\E7F7\E7B0:ve=\E>:\
-	:vs=\E;:
-
-#### NeWS consoles
-#
-# Console terminal windows under the NeWS (Sun's Display Postscript windowing
-# environment).   Note: these have nothing to do with Sony's News workstation
-# line.
-#
-
-# Entry for NeWS's psterm from Eric Messick & Hugh Daniel
-# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
-psterm|psterm-basic|NeWS psterm-80x34:\
-	:am:bs:hs:km:ul:\
-	:co#80:it#8:li#34:\
-	:al=\EA:cd=\EB:ce=\EC:cl=^L:cm=\E%d;%d;:cs=\EE%d;%d;:\
-	:dc=\EF:dl=\EK:do=\EP:ei=\ENi:fs=\ENl:ho=\ER:i1=\EN*:\
-	:im=\EOi:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=\ET:ll=\EU:\
-	:mb=\EOb:md=\EOd:me=\EN*:mr=\EOr:nd=\EV:rc=^\:sc=^]:se=\ENo:\
-	:sf=\EW:so=\EOo:sr=\EX:ta=^I:te=\ENt:ti=\EOt:ts=\EOl:\
-	:ue=\ENu:up=\EY:us=\EOu:vb=\EZ:
-psterm-96x48|NeWS psterm 96x48:\
-	:co#96:li#48:tc=psterm:
-psterm-90x28|NeWS psterm 90x28:\
-	:co#90:li#28:tc=psterm:
-psterm-80x24|NeWS psterm 80x24:\
-	:co#80:li#24:tc=psterm:
-# This is a faster termcap for psterm.  Warning:  if you use this termcap,
-# some control characters you type will do strange things to the screen.
-# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
-psterm-fast|NeWS psterm fast version (flaky ctrl chars):\
-	:am:bs:hs:km:ul:\
-	:co#80:it#8:li#34:\
-	:al=^A:cd=^B:ce=^C:cl=^L:cm=\004%d;%d;:cs=\005%d;%d;:dc=^F:\
-	:dl=^K:do=^P:ei=^Ni:fs=^Nl:ho=^R:i1=^N*:im=^Oi:kd=\E[B:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=^T:ll=^U:mb=^Ob:md=^Od:me=^N*:\
-	:mr=^Or:nd=^V:rc=^\:sc=^]:se=^No:sf=^W:so=^Oo:sr=^X:ta=^I:\
-	:te=^Nt:ti=^Ot:ts=^Ol:ue=^Nu:up=^Y:us=^Ou:vb=^Z:
-
-#### NeXT consoles
-#
-# Use `glasstty' for the Workspace application
-#
-
-# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
-next|NeXT console:\
-	:am:xt:\
-	:co#80:it#8:li#24:\
-	:bl=^G:ce=\E[K:cl=^L:cm=\E[%i%d;%dH:cr=^M:do=^J:ho=\E[H:\
-	:kb=^H:kd=^J:kl=^H:le=^H:me=\E[m:nd=\E[C:nw=^M^J:se=\E[4;1m:\
-	:sf=^J:so=\E[4;2m:ta=^I:up=\E[A:
-nextshell|NeXT Shell application:\
-	:am:\
-	:co#80:\
-	:bl=^G:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:le=^H:nw=^M^J:ta=^I:
-
-#### Sony NEWS workstations
-#
-
-# (news-unk: this had :KB=news: -- esr)
-news-unk|SONY NEWS vt100 emulator common entry:\
-	:am:bs:pt:xn:\
-	:co#80:\
-	:AL=\E[%dL:DL=\E[%dM:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:dl=\E[M:do=^J:ho=\E[H:if=/usr/lib/tabset/vt100:\
-	:is=\E[?7h\E[?1l\E[?3l\E7\E8:k0=\EOY:k1=\EOP:k2=\EOQ:\
-	:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:\
-	:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
-	:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
-	:nl=^J:rc=\E8:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r:\
-	:sc=\E7:se=\E[m:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:\
-	:us=\E[4m:
-#
-# (news-29: this had :TY=ascii: --esr)
-news-29:\
-	:li#29:tc=news-unk:
-# (news-29-euc: this had :TY=euc: --esr)
-news-29-euc:\
-	:tc=news-29:
-# (news-29-sjis: this had :TY=sjis: --esr)
-news-29-sjis:\
-	:tc=news-29:
-#
-# (news-33: this had :TY=ascii: --esr)
-news-33:\
-	:li#33:tc=news-unk:
-# (news-33-euc: this had :TY=euc: --esr)
-news-33-euc:\
-	:tc=news-33:
-# (news-33-sjis: this had :TY=sjis: --esr)
-news-33-sjis:\
-	:tc=news-33:
-#
-# (news-42: this had :TY=ascii: --esr)
-news-42:\
-	:li#42:tc=news-unk:
-# (news-42-euc: this had :TY=euc: --esr)
-news-42-euc:\
-	:tc=news-42:
-# (news-42-sjis: this had :TY=sjis: --esr)
-news-42-sjis:\
-	:tc=news-42:
-#
-#	NEWS-OS old termcap entry
-#
-# (news-old-unk: this had :KB=news:TY=sjis: --esr)
-news-old-unk|SONY NEWS vt100 emulator common entry:\
-	:am:bs:pt:xn:\
-	:co#80:vt#3:\
-	:bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:do=^J:ho=\E[H:if=/usr/lib/tabset/vt100:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:\
-	:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nl=^J:rc=\E8:\
-	:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=\E[m:\
-	:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
-#
-# (nwp512: this had :DE=^H:, which I think means :bs: --esr)
-nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines:\
-	:bs:\
-	:li#40:\
-	:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8:\
-	:tc=news-old-unk:
-#
-# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
-nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line:\
-	:li#42:\
-	:is=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8:tc=news-old-unk:
-#
-# (nwp-512-o: this had :KB=nwp410:DE=^H:  I interpret the latter as :bs:. --esr)
-nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines:\
-	:bs:\
-	:li#40:\
-	:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8:\
-	:tc=news-old-unk:
-#
-# (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
-nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines:\
-	:bs:\
-	:li#31:\
-	:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8:\
-	:tc=news-old-unk:
-#
-# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as :bs:; --esr)
-# also the alias vt100-bm.
-nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines:\
-	:bs:\
-	:li#33:\
-	:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8:\
-	:tc=news-old-unk:
-#
-# (nwp513-o: had :DE=^H:, I think that's :bs:; also the alias vt100-bm --esr)
-nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines:\
-	:bs:\
-	:li#31:\
-	:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8:\
-	:tc=news-old-unk:
-#
-# (news28: this had :DE=^H:, I think that's :bs:, and :KB=nws1200: --esr)
-news28|sony vt100 emulator 28 lines:\
-	:bs:\
-	:li#28:\
-	:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8:\
-	:tc=news-old-unk:
-#
-# (news29: this had :TY=ascii:KB=nws1200:\ --esr)
-news29|news28-a|sony vt100 emulator 29 lines:\
-	:li#29:\
-	:is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8:\
-	:tc=news-old-unk:
-#
-# (news511: this had :TY=sjis: --esr)
-nwp511|nwp-511|nwp-511 vt100:\
-	:am:bs:pt:xn:\
-	:co#80:li#24:\
-	:al=\E[L:cd=30\E[J:ce=3\E[K:cl=20\E[;H\E[2J:\
-	:cm=\E[%i%d;%dH:dl=\E[M:is=\E[?5l\E[?1l\E>\E[?7h\E[?8h:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:k6=\E#W:kd=\E[B:\
-	:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:nd=\E[C:\
-	:rs=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h:se=2\E[m:\
-	:so=2\E[7m:sr=5\EM:ue=2\E[m:up=2\E[A:us=2\E[4m:\
-	:vb=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l:
-# (news517: this had :TY=sjis:. --esr)
-nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows:\
-	:es:hs:\
-	:co#80:li#30:\
-	:ds=\E[1$~:fs=\E[0$}:i2=\E[2$~\n:\
-	:is=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:ts=\E[1$}\E[;%df:tc=vt200:
-# (news517-w: this had :TY=sjis:. --esr)
-nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows:\
-	:es:hs:\
-	:co#132:li#50:\
-	:ds=\E[1$~:fs=\E[0$}:i2=\E[2$~\n:\
-	:is=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:rs=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:ts=\E[1$}\E[;%df:tc=vt200:
-
-#### Common Desktop Environment
-#
-
-# This ships with Sun's CDE in Solaris 2.5
-# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-dtterm|CDE desktop terminal:\
-	:am:mi:ms:xn:xo:\
-	:NC@:co#80:it#8:li#24:lm#0:\
-	:%1=\E[28~:*6=\E[4~:@0=\E[1~:AL=\E[%dL:DC=\E[%dP:\
-	:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:F2=\E[24~:F3=\E[25~:\
-	:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:\
-	:F9=\E[33~:FA=\E[34~:IC=\E[%d@:LE=\E[%dD:RA=\E[?7l:\
-	:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ec=\E[%dX:\
-	:ei=\E[4l:ho=\E[H:im=\E[4h:\
-	:is=\E F\E>\E[?1l\E[?7h\E[?45l:k1=\E[11~:k2=\E[12~:\
-	:k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:k7=\E[18~:\
-	:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\
-	:kP=\E[5~:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m\017:mh=\E[2m:mk=\E[8m:mr=\E[7m:\
-	:nd=\E[C:nw=\EE:rc=\E8:sc=\E7:se=\E[22;27m:sf=\ED:\
-	:so=\E[2;7m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:\
-	:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:tc=ecma+color:
-
-#### Non-Unix Consoles
-#
-
-# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
-# a Unix-style environment used on OS/2.  (Note that the suffix makes some
-# names longer than 14 characters, the nominal maximum).
-#
-# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
-ansi-emx|ANSI.SYS color:\
-	:am:eo:mi:ms:ut:xn:xo:\
-	:Co#16:co#80:it#8:li#25:pa#64:\
-	:&7=^Z:AB=\E[4%dm:AF=\E[3%dm:DC=\E[%dp:IC=\E[%d@:K2=\E[G:\
-	:S2=\E[11m:S3=\E[10m:bl=^G:cd=\E[J:ce=\E[K:\
-	:cl=\E[1;33;44m\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
-	:do=^J:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:k0=\0D:k1=\0;:\
-	:k2=\0<:k3=\0=:k4=\0>:k5=\0?:k6=\0@:k7=\0A:k8=\0B:k9=\0C:\
-	:kH=\0O:kI=\0R:kN=\0Q:kP=\0I:kb=^H:kd=\0P:kh=\0G:kl=\0K:\
-	:kr=\0M:ku=\0H:le=^H:mb=\E[5m:md=\E[1m:\
-	:me=\E[0m\E[1;33;44m:mr=\E[5;37;41m:nd=\E[C:nw=^M^J:\
-	:r1=\Ec:se=\E[0;44m\E[1;33m:sf=^J:so=\E[0;31;47m:st=\EH:\
-	:ta=^I:u8=\E[?6c:u9=\E[c:ue=\E[0;44m\E[1;33m:up=\E[A:\
-	:us=\E[1;31;44m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:
-ansi-color-2-emx|ANSI.SYS color 2:\
-	:am:eo:mi:ms:ut:xn:xo:\
-	:Co#16:co#80:it#8:li#25:pa#64:\
-	:&7=^Z:AB=\E[4%dm:AF=\E[3%dm:DC=\E[%dp:IC=\E[%d@:K2=\E[G:\
-	:S2=\E[11m:S3=\E[10m:bl=^G:cd=\E[J:ce=\E[K:\
-	:cl=\E[0;37;44m\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
-	:do=^J:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:k0=\0D:k1=\0;:\
-	:k2=\0<:k3=\0=:k4=\0>:k5=\0?:k6=\0@:k7=\0A:k8=\0B:k9=\0C:\
-	:kH=\0O:kI=\0R:kN=\0Q:kP=\0I:kb=^H:kd=\0P:kh=\0G:kl=\0K:\
-	:kr=\0M:ku=\0H:le=^H:mb=\E[5m:md=\E[1m:me=\E[0;37;44m:\
-	:mr=\E[1;37;46m:nd=\E[C:nw=^M^J:r1=\Ec:se=\E[0;37;44m:\
-	:sf=^J:so=\E[1;37;46m:st=\EH:ta=^I:u8=\E[?6c:u9=\E[c:\
-	:ue=\E[0;37;44m:up=\E[A:us=\E[1;36;44m:vb=\E[?5h\E[?5l:\
-	:ve=\E[?25h:vi=\E[?25l:
-ansi-color-3-emx|ANSI.SYS color 3:\
-	:am:eo:mi:ms:ut:xn:xo:\
-	:Co#16:co#80:it#8:li#25:pa#64:\
-	:&7=^Z:AB=\E[4%dm:AF=\E[3%dm:DC=\E[%dp:IC=\E[%d@:K2=\E[G:\
-	:S2=\E[11m:S3=\E[10m:bl=^G:cd=\E[J:ce=\E[K:\
-	:cl=\E[0;37;40m\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
-	:do=^J:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:k0=\0D:k1=\0;:\
-	:k2=\0<:k3=\0=:k4=\0>:k5=\0?:k6=\0@:k7=\0A:k8=\0B:k9=\0C:\
-	:kH=\0O:kI=\0R:kN=\0Q:kP=\0I:kb=^H:kd=\0P:kh=\0G:kl=\0K:\
-	:kr=\0M:ku=\0H:le=^H:mb=\E[5m:md=\E[1m:me=\E[0;10m:\
-	:mr=\E[1;37;46m:nd=\E[C:nw=^M^J:r1=\Ec:se=\E[0;37;40m:\
-	:sf=^J:so=\E[1;37;46m:st=\EH:ta=^I:u8=\E[?6c:u9=\E[c:\
-	:ue=\E[0;37;40m:up=\E[A:us=\E[0;36;40m:vb=\E[?5h\E[?5l:\
-	:ve=\E[?25h:vi=\E[?25l:
-mono-emx|stupid monochrome ansi terminal with only one kind of emphasis:\
-	:am:\
-	:co#80:it#8:li#24:\
-	:K2=\E[G:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:do=\E[B:\
-	:ho=\E[H:k0=\0D:k1=\0;:k2=\0<:k3=\0=:k4=\0>:k5=\0?:k6=\0@:\
-	:k7=\0A:k8=\0B:k9=\0C:kH=\0O:kI=\0R:kN=\0Q:kP=\0I:kb=^H:\
-	:kd=\0P:kh=\0G:kl=\0K:kr=\0M:ku=\0H:le=\E[D:me=\E[0m:\
-	:mr=\E[7m:nd=\E[C:nw=^M^J:ta=^I:up=\E[A:
-
-# Use this for cygwin32 (tested with beta 19.1)
-# underline is colored bright magenta
-# shifted kf1-kf12 are kf11-kf22
-cygwinB19|ansi emulation for cygwin32:\
-	:@7=\E[4~:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:\
-	:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:\
-	:FA=\E[34~:RA@:SA@:k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:\
-	:k5=\E[[E:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
-	:k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kd=\E[B:\
-	:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:tc=ansi.sys:
-
-# Use this for cygwin (tested with version 1.1.0).
-# I've combined pcansi and linux.  Some values of course were different and
-# I've indicated which of these were and which I used.
-# Cheers, earnie_boyd@yahoo.com
-# several changes based on running with tack and comparing with older entry -TD
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-cygwin|ansi emulation for Cygwin:\
-	:am:eo:in:ms:xo:\
-	:Co#8:NC#3:co#80:it#8:li#25:pa#64:\
-	:&7=^Z:@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:\
-	:DL=\E[%dM:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:\
-	:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:\
-	:FA=\E[34~:IC=\E[%d@:S2=\E[11m:S3=\E[10m:al=\E[L:bl=^G:\
-	:cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cv=\E[%i%dd:dc=\E[P:dl=\E[M:do=\E[B:\
-	:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:k1=\E[[A:k2=\E[[B:\
-	:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
-	:k9=\E[20~:k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
-	:kb=^H:kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
-	:md=\E[1m:me=\E[0;10m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=^M^J:\
-	:op=\E[39;49m:r1=\Ec\E]R:rc=\E8:sc=\E7:se=\E[27m:sf=^J:\
-	:so=\E[7m:sr=\EM:st=\EH:ta=^I:u6=\E[%i%d;%dR:u7=\E[6n:\
-	:u9=\E[c:ue=\E[24m:up=\E[A:us=\E[4m:
-
-# This entry fits the Windows NT console when the _POSIX_TERM environment
-# variable is set to 'on'.  While the Windows NT POSIX console is seldom used,
-# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
-# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
-# systems is not, and (surprise!) they match very well.
-#
-# See:  MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
-# VI POSIX Editor for Windows NT 3.1".  True to Microsoft form, not only
-# are the installation instructions a pile of mind-numbing bureaucratese,
-# but the termcap entry is actually broken and unusable as given; the :do:
-# capability is misspelled "d".
-#
-# To use this, you need to a bunch of environment variables:
-#
-# SET _POSIX_TERM=on
-# SET TERM=ansi
-# SET TERMCAP=location of termcap file in POSIX file format
-# which is case-sensitive.
-# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
-# SET TMP=//C/TEMP
-#
-# Important note: setting the TMP environment variable in POSIX style renders
-# it incompatible with a lot of other applications, including Visual C++. So
-# you should have a separate command window just for vi. All the other
-# variables may be permanently set in the Control Panel\System applet.
-#
-# You can find out more about the restrictions of this facility at
-# <http://www.nentug.org/unix-to-nt/ntposix.htm>.
-#
-# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
-ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode:\
-	:am:bw:ms:\
-	:co#80:it#8:li#25:\
-	:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:cr=^M:do=^J:\
-	:ho=\E[H:kb=^H:kd=\E[V:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
-	:me=\E[0m:mr=\E[7m:nd=\E[C:nw=\r\E[S:rc=\E[u:sc=\E[s:\
-	:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:up=\E[A:
-# From: jew@venus.sunquest.com
-# Date: 19 Feb 93 23:41:07 GMT
-# Here's  a  combination of  ansi and  vt100 termcap
-# entries   that  works  nearly   perfectly  for  me
-# (Gateway 2000 Handbook and Microsoft Works 3.0):
-pcmw|PC running Microsoft Works:\
-	:am:xn:\
-	:co#80:it#8:li#24:vt#3:\
-	:bl=^G:cd=50\E[J:ce=3\E[K:cl=50\E[;H\E[2J:\
-	:cm=5\E[%i%d;%dH:cr=^M:ct=2\E[3g:do=^J:ho=\E[H:\
-	:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
-	:kb=^H:kd=\EOB:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:mb=2\E[5m:\
-	:md=2\E[1m:me=2\E[m:mr=2\E[7m:nd=2\E[C:nw=5\r\ED:rc=\E8:\
-	:rf=/usr/share/lib/tabset/vt100:\
-	:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
-	:sf=5\ED:so=2\E[7m:sr=5\EM:st=2\EH:ta=^I:ue=2\E[m:up=2\E[A:\
-	:us=2\E[4m:
-
-######## COMMON TERMINAL TYPES
-#
-# This section describes terminal classes and maker brands that are still
-# quite common, but have proprietary command sets not blessed by ANSI.
-#
-
-#### Altos
-#
-# Altos made a moderately successful line of UNIX boxes.  In 1990 they were
-# bought out by Acer, a major Taiwanese manufacturer of PC-clones.
-# Acer has a web site at http://www.acer.com.
-#
-# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
-# His comments suggest they were shipped with the system.
-#
-
-# (altos2: had extension capabilities
-#	:c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
-#	:c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
-#	:c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
-#	:cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
-#	:XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
-#	:YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
-#	:HL=^AP\r:SP=\E[i:\
-#	:IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
-#	:LO=\E[0q:LC=\E[5q:LL=\E[6q:\
-# Comparison with the k* capabilities makes it obvious that the c* things are
-# shift keys.  I have renamed them to keys 32 and up accordingly.  Also,
-# :sr: was given as a boolean-- esr)
-altos2|alt2|altos-2|altos II:\
-	:co#80:it#8:li#24:sg#0:ug#0:\
-	:*5=^Am\r:*8=^An\r:FM=^A`\r:FN=^Aa\r:FO=^Ab\r:FP=^Ac\r:\
-	:FQ=^Ad\r:FR=^Ae\r:FS=^Af\r:FT=^Ag\r:FU=^Ah\r:FV=^Ai\r:\
-	:FW=^Aj\r:FX=^Ak\r:RA=\E[?7l:SA=\E[?7h:al=\E[L:cd=\E[J:\
-	:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:\
-	:dl=\E[M:do=\E[1B:ei=:ho=\E[H:ic=\E[@:\
-	:if=/usr/share/tabset/vt100:im=:\
-	:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:k0=^AI\r:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=^AJ\r:kB=^AK\r:kC=^AL\r:\
-	:kD=^AM\r:kE=^AN\r:kF=^AO\r:kb=^H:kd=\E[B:kh=\E[f:kl=\E[D:\
-	:kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\E[1C:nw=^M^J:se=\E[m:\
-	:sf=^J:so=\E[7m:ta=^I:ue=\E[m:up=\E[1A:us=\E[4m:
-# (altos3: had extension capabilities
-#	:c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
-#	:c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
-#	:c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
-#	:cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
-#	:XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
-#	:HL=^AP\r:SP=\E[i:\
-#	:IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
-altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V:\
-	:mb=\E[5p:me=\E[p:sr=\EM:tc=altos2:
-altos4|alt4|altos-4|altos IV:\
-	:tc=wy50:
-# (altos7: had extension capabilities:
-#	:GG#0:GI=\EH8:GF=\EH7:\
-#	:c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
-#	:c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
-#	:c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
-#	:cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
-# Comparison with the k* capabilities makes it obvious that the c* things are
-# shift keys.  I have renamed them to keys 32 and up accordingly.  I have
-# also made this entry relative to adm12 in order to give it an :sa:. The
-# <invis> imported by use=adm+sgr may work, let me know. -- esr)
-altos7|alt7|altos VII:\
-	:am:mi:\
-	:co#80:li#24:sg#0:\
-	:*5=^Am\r:*8=^An\r:FM=^A`\r:FN=^Aa\r:FO=^Ab\r:FP=^Ac\r:\
-	:FQ=^Ad\r:FR=^Ae\r:FS=^Af\r:FT=^Ag\r:FU=^Ah\r:FV=^Ai\r:\
-	:FW=^Aj\r:FX=^Ak\r:ac=j5k3l2m1n8q\:t4u9v=w0x6:al=\EE:\
-	:cd=\EY:ce=\ET:cl=\E+^^:cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:\
-	:do=^J:ei=\Er:ho=^^:im=\Eq:\
-	:is=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2:k0=^AI\r:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=^AJ\r:kB=^AK\r:kC=^AL\r:\
-	:kD=^AM\r:kE=^AN\r:kF=^AO\r:kN=\EK:kP=\EJ:kb=^H:kd=^J:kh=^^:\
-	:kl=^H:kr=^L:ku=^K:le=^H:mb=\EG2:md=\EGt:mh=\EGp:mk=\EG1:\
-	:nd=^L:nw=^M^J:pf=\EJ:po=\Ed#:sf=^J:sr=\Ej:ta=^I:up=^K:\
-	:tc=adm+sgr:
-altos7pc|alt7pc|altos PC VII:\
-	:@7=\ET:tc=altos7:
-
-#### Hewlett-Packard (hp)
-#
-#	Hewlett-Packard
-#	8000 Foothills Blvd
-#	Roseville, CA 95747
-#	Vox: 1-(916)-785-4363	(Technical response line for VDTs)
-#	     1-(800)-633-3600	(General customer support)
-#
-#
-# As of March 1998, HP no longer has any terminals in production.
-# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
-# supported (they still have parts). So are the 2392a and 2394a.
-# See the WORKSTATION CONSOLES section for the 700s.
-#
-
-# Generic HP terminal - this should (hopefully) work on any HP terminal.
-hpgeneric|hp|hewlett-packard generic terminal:\
-	:am:bs:da:db:mi:pt:xs:\
-	:co#80:li#24:lm#0:vt#6:\
-	:al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%dC:cl=\EH\EJ:\
-	:cm=\E&a%r%dc%dY:cr=^M:ct=\E3:cv=\E&a%dY:dc=\EP:dl=\EM:\
-	:do=^J:ei=\ER:im=\EQ:kB=\Ei:kb=^H:le=^H:me=\E&d@:nd=\EC:\
-	:se=\E&d@:sf=^J:so=\E&dJ:st=\E1:ta=^I:ue=\E&d@:up=\EA:\
-	:us=\E&dD:
-
-hp110|hewlett-packard model 110 portable:\
-	:li#16:tc=hpgeneric:
-
-hp+pfk+cr|hp function keys with CR:\
-	:k1=\Ep\r:k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:\
-	:k7=\Ev\r:k8=\Ew\r:
-
-hp+pfk-cr|hp function keys w/o CR:\
-	:k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:
-
-# The hp2621s use the same keys for the arrows and function keys,
-# but not separate escape sequences. These definitions allow the
-# user to use those keys as arrow keys rather than as function
-# keys.
-hp+pfk+arrows|hp alternate arrow definitions:\
-	:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:kF=\Er\r:kH=\Eq\r:kR=\Es\r:\
-	:kd=\Ew\r:kh=\Ep\r:kl=\Eu\r:kr=\Ev\r:ku=\Et\r:
-
-hp+arrows|hp arrow definitions:\
-	:kF=\ES:kH=\EF:kR=\ET:kd=\EB:kh=\Eh:kl=\ED:kr=\EC:ku=\EA:
-
-# Generic stuff from the HP 262x series
-#
-hp262x|HP 262x terminals:\
-	:xs:\
-	:cd=\EJ:dc=\EP:ip=:kA=\EL:kD=\EP:kE=\EK:kF=\ES:kI=\EQ:kL=\EM:\
-	:kM=\ER:kN=\EU:kP=\EV:kR=\ET:kS=\EJ:kd=\EB:ke=\E&s0A:kh=\Eh:\
-	:kl=\ED:kr=\EC:ks=\E&s1A:ku=\EA:mb=\E&dA:me=\E&d@:mk=\E&dS:\
-	:mr=\E&dB:\
-	:..sa=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c:\
-	:se=\E&d@:sf=\ES:so=\E&dB:ta=\011:ue=\E&d@:us=\E&dD:
-
-# Note: no :ho: on HPs since that homes to top of memory, not screen.
-# Due to severe 2621 braindamage, the only way to get the arrow keys to
-# transmit anything at all is to turn on the function key labels
-# with :ks:, and even then the user has to hold down shift!
-# The default 2621 turns off the labels except when it has to to
-# enable the function keys. If your installation prefers labels
-# on all the time, or off all the time (at the "expense" of the
-# function keys), use 2621-nl or 2621-wl.
-#
-# Note: there are newer ROMs for 2621's that allow you to set
-# strap A so the regular arrow keys xmit \EA, etc, as with the
-# 2645. However, even with this strap set, the terminal stops
-# xmitting if you reset it, until you unset and reset the strap!
-# Since there is no way to set/unset the strap with an escape
-# sequence, we don't use it in the default.
-# If you like, you can use 2621-ba (brain-damaged arrow keys).
-hp2621-ba|2621 w/new rom and strap A set:\
-	:ke@:ks@:tc=hp+arrows:tc=hp2621:
-
-# hp2621 with function labels. Most of the time they are off,
-# but inside vi, the function key labels appear. You have to
-# hold down shift to get them to xmit.
-hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels:\
-	:is=\E&jA\r:ke=\E&jA:tc=hp2621-fl:
-hp2621-fl|hp 2621:\
-	:xo:xs@:\
-	:pb#19200:\
-	:bt=\Ei:cm=\E&a%r%dc%dY:dc=\EP:ip=:is=\E&j@\r:ke=\E&j@:\
-	:ks=\E&jB:me=\E&d@:se=\E&d@:so=\E&dD:ta=\011:ue=\E&d@:\
-	:us=\E&dD:tc=hp+pfk+cr:tc=hpgeneric:
-
-# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
-hp2621p|hp 2621 with printer:\
-	:pf=\E&p13C:po=\E&p11C:tc=hp2621:
-
-hp2621p-a|hp2621p with fn as arrows:\
-	:tc=hp+pfk+arrows:tc=hp2621p:
-
-# hp2621 with k45 keyboard
-hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard:\
-	:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:\
-	:ku=\EA:tc=hp2621:
-
-# 2621 using all 48 lines of memory, only 24 visible at any time.
-hp2621-48|48 line 2621:\
-	:li#48:\
-	:cm=\E&a%r%dc%dR:cv=\E&a%dR:ho=\EH:tc=hp2621:
-
-# 2621 with no labels ever. Also prevents vi delays on escape.
-hp2621-nl|hp 2621 with no labels:\
-	:kd@:ke@:kh@:kl@:kr@:ks@:ku@:tc=hp2621-fl:
-
-# Needed for UCB ARPAVAX console, since lsi-11 expands tabs
-# (wrong).
-#
-hp2621-nt|hp 2621 w/no tabs:\
-	:ta@:tc=hp2621:
-
-# Hp 2624 B with 4 or 10 pages of memory.
-#
-# Some assumptions are made with this entry. These settings are
-# NOT set up by the initialization strings.
-#
-# Port Configuration
-# 	RecvPace=Xon/Xoff
-# 	XmitPace=Xon/Xoff
-# 	StripNulDel=Yes
-#
-# Terminal Configuration
-# 	InhHndShk=Yes
-# 	InhDC2=Yes
-# 	XmitFnctn(A)=No
-# 	InhEolWrp=No
-#
-# Note: the 2624 DOES have a true :ho:, believe it or not!
-#
-# The 2624 has an "error line" to which messages can be sent.
-# This is CLOSE to what is expected for a "status line". However,
-# after a message is sent to the "error line", the next carriage
-# return is EATEN and the "error line" is turned back off again!
-# So I guess we can't define :hs:, :es:, :ws:, :ds:, :fs:, :ts:.
-#
-# This entry supports emacs (and any other program that uses raw
-# mode) at 4800 baud and less. I couldn't get the padding right
-# for 9600.
-#
-# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
-hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B:\
-	:da:db:\
-	:lm#96:\
-	:vb=\E&w13F\E&w12F\E&w13F\E&w12F:tc=hp+labels:tc=scrhp:
-
-# This hp2626 entry does not use any of the fancy windowing stuff
-# of the 2626.
-#
-# Indeed, terminfo does not yet handle such stuff. Since changing
-# any window clears memory, it is probably not possible to use
-# this for screen opt.
-#
-# ed is incredibly slow most of the time - I am guessing at the
-# exact padding. Since the terminal uses xoff/xon this is intended
-# only for cost computation, so that the terminal will prefer el
-# or even dl1 which is probably faster!
-#
-# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
-# extra slow on the last line of the window.
-#
-# The padding probably should be changed.
-#
-hp2626|hp2626a|hp2626p|hp 2626:\
-	:da:db:\
-	:lm#0:pb#19200:\
-	:SF=\E&r%dD:SR=\E&r%dU:cd=\ED\EJ\EC:ip=:is=\E&j@\r:\
-	:tc=hp+pfk+cr:tc=hp+labels:tc=scrhp:
-
-# This entry is for sysline. It allocates a 23 line window with
-# a 115 line workspace for regular use, and a 1 line window for
-# the status line.
-#
-# This assumes port 2 is being used.
-# Turn off horizontal line, Create ws #1 with 115 lines,
-# Create ws #2 with 1 line, Create window #1 lines 1-23,
-# Create window #2 lines 24-24, Attach cursor to workspace #1.
-# Note that this clears the tabs so it must be done by tset before
-# it sets the tabs.
-#
-hp2626-s|hp 2626 using only 23 lines:\
-	:es:hs:\
-	:li#23:\
-	:fs=\E&d@\E&w7f2p1I\E&w4f1I:\
-	:i1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r:\
-	:ts=\E&w7f2p2I\E&w4f2I\r\EK\E&a%dC:tc=hp2626:
-# Force terminal back to 24 lines after being 23.
-hp2626-ns|hp 2626 using all 24 lines:\
-	:i1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r:\
-	:tc=hp2626:
-# Various entries useful for small windows on 2626.
-hp2626-12|hewlett-packard 2626 12 lines:\
-	:li#12:tc=hp2626:
-hp2626-12x40|hewlett-packard 2626 12 lines 40 columns:\
-	:co#40:li#12:tc=hp2626:
-hp2626-x40|hewlett-packard 2626 40 columns:\
-	:co#40:tc=hp2626:
-hp2626-12-s|hewlett-packard 2626 11 lines plus status:\
-	:li#11:tc=hp2626-s:
-
-#
-# hp2627 color tubes from University of Wisconsin
-#
-hp2627a-rev|hp 2627 with reverse video colors:\
-	:cr=^M:do=^J:\
-	:is=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r:\
-	:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:ue=\E&v0S\E&d@:\
-	:us=\E&dD\E&v1S:tc=hp2621-nl:
-hp2627a|hp 2627 color terminal with no labels:\
-	:cr=^M:do=^J:\
-	:is=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r:\
-	:kb=^H:kd=^J:kl=^H:nw=^M^J:se=\E&v0S:sf=^J:so=\E&v2S:ta=^I:\
-	:ue=\E&v0S\E&d@:us=\E&dD\E&v1S:tc=hp2621-nl:
-hp2627c|hp 2627 color (cyan) terminal with no labels:\
-	:cr=^M:do=^J:\
-	:is=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r:\
-	:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:tc=hp2627a:
-
-# hp2640a doesn't have the Y cursor addressing feature, and C is
-# memory relative instead of screen relative, as we need.
-#
-hp2640a|hp 2640a:\
-	:cm@:ke@:ks@:tc=hp2645:
-
-hp2640b|hp2644a|hp 264x series:\
-	:ke@:ks@:tc=hp2645:
-
-# (hp2641a: removed unknown :gu: -- esr)
-hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry:\
-	:am:da:db:mi:xs:\
-	:co#80:li#24:\
-	:al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%2C:cl=\EH\EJ:\
-	:cm=\E&a%r%2c%2Y:cr=^M:cv=\E&a%2Y:dc=\EP:dl=\EM:do=^J:\
-	:ei=\ER:if=/usr/share/tabset/std:im=\EQ:is=500\EE:kb=^H:\
-	:kd=^J:kl=^H:le=^H:nd=\EC:nw=^M^J:se=\E&d@:sf=^J:so=\E&dB:\
-	:ta=^I:up=\EA:
-
-# This terminal should be used at 4800 baud or less. It needs padding for
-# plain characters at 9600, I guessed at an appropriate cr delay.  It really
-# wants ^E/^F handshaking, but that doesn't work well even if you write
-# software to support it.
-hp2645|hp45|HP 2645 series:\
-	:pb#9600:\
-	:cr=\r:kA=\EL:kD=\EP:kE=\EK:kF=\ES:kI=\EQ:kL=\EM:kM=\ER:\
-	:kN=\EU:kP=\EV:kR=\ET:kS=\EJ:kT=\E1:kd=\EB:ke=\E&s0A:kh=\Eh:\
-	:kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:ku=\EA:mb=\E&dA:me=\E&d@:\
-	:mh=\E&dH:mr=\E&dB:\
-	:..sa=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c:\
-	:us=\E&dD:tc=hpgeneric:
-# You should use this terminal at 4800 baud or less.
-hp2648|hp2648a|HP 2648a graphics terminal:\
-	:cl=\EH\EJ:cm=\E&a%r%dc%dY:dc=\EP:ip=:tc=hp2645:
-
-# The HP 150 terminal is a fairly vanilla HP terminal, with the
-# clreol standout problem. It also has graphics capabilities and
-# a touch screen, which we don't describe here.
-hp150|hewlett packard Model 150:\
-	:bs:tc=hp2622:
-
-# HP 2382a terminals, "the little ones." They don't have any
-# alternate character set support and sending out ^N/^O will
-# leave the screen blank.
-hp2382a|hp2382|hewlett packard 2382a:\
-	:da:db:\
-	:lh#1:lm#48:\
-	:ac@:ae@:as@:me=\E&d@:\
-	:..pn=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s:\
-	:..sa=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c:\
-	:tc=hp+labels:tc=scrhp:
-
-hp2621-a|hp2621a-a|hp2621 with fn as arrows:\
-	:tc=hp+pfk+arrows:tc=hp2621-fl:
-
-# newer hewlett packard terminals
-
-newhpkeyboard|generic entry for HP extended keyboard:\
-	:kA=\EL:kB=\Ei:kC=\EJ:kD=\EP:kE=\EK:kF=\ET:kH=\EF:kI=\EQ:\
-	:kL=\EM:kM=\ER:kN=\EU:kP=\EV:kR=\ES:kS=\EJ:kb=^H:kd=\EB:\
-	:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:ku=\EA:\
-	:tc=hp+pfk-cr:
-
-newhp|generic entry for new hewlett packard terminals:\
-	:am:bw:mi:xo:xs:\
-	:co#80:li#24:pb#4800:\
-	:ac=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q,t5u6v8w7x.:\
-	:ae=^O:al=\EL:as=^N:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:cr=^M:ct=\E3:\
-	:dc=\EP:dl=\EM:do=^J:ei=\ER:i1=\E&jB:im=\EQ:ip=:le=^H:\
-	:mb=\E&dA:md=\E&dF:me=\E&d@\017:mh=\E&dH:mk=\E&dS:\
-	:mr=\E&dB:nd=\EC:nw=^M^J:\
-	:..pk=\E&f0a%p1%dk0d%p2%l%dL%p2%s:\
-	:..pl=\E&f1a%p1%dk0d%p2%l%dL%p2%s:\
-	:..px=\E&f2a%p1%dk0d%p2%l%dL%p2%s:r1=\Eg:\
-	:..sa=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;:\
-	:se=\E&d@:sf=^J:so=\E&dJ:sr=\ET:st=\E1:ta=\011:ue=\E&d@:\
-	:up=\EA:us=\E&dD:tc=newhpkeyboard:
-
-memhp|memory relative addressing for new HP ttys:\
-	:vt#6:\
-	:CM=\E&a%dr%dC:DO=\E&a+%dR:LE=\E&a-%dC:RI=\E&a+%dC:\
-	:UP=\E&a-%dR:ch=\E&a%dC:cl=\EH\EJ:cm=\E&a%dr%dC:\
-	:cv=\E&a%dR:ho=\EH:ll=\E&a23R\r:tc=newhp:
-
-scrhp|screen relative addressing for new HP ttys:\
-	:CM=\E&a%dr%dC:DO=\E&a+%dR:LE=\E&a-%dC:RI=\E&a+%dC:\
-	:UP=\E&a-%dR:ch=\E&a%dC:cl=\E&a0c0Y\EJ:cm=\E&a%dy%dC:\
-	:cv=\E&a%dY:ho=\E&a0y0C:ll=\E&a0y0C\EA:tc=newhp:
-
-# (hp+labels: added label values from a BRL termcap -- esr)
-hp+labels|"standard" label info for new HP ttys:\
-	:Nl#8:lh#2:lw#8:\
-	:LF=\E&j@:LO=\E&jB:l0=f1:l1=f2:l2=f3:l3=f4:l4=f5:l5=f6:l6=f7:\
-	:l7=f8:\
-	:..pn=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s:
-
-hp+printer|"standard" printer info for HP ttys:\
-	:ff=\E&p4u0C:pf=\E&p13C:po=\E&p11C:ps=\EH\E&p4dF:
-
-
-# The new hp2621b is kind of a cross between the old 2621 and the
-# new 262x series of machines. It has dip-switched options.
-# The firmware has a bug in it such that if you give it a null
-# length label, the following character is eaten!
-hp2621b|hp 2621b with old style keyboard:\
-	:Nl#8:lh#1:lm#48:lw#8:\
-	:LO=\E&jB:kF=\ET:kH=\EF:kR=\ES:kd=\EB:kh=\Eh:kl=\ED:kr=\EC:\
-	:ku=\EA:\
-	:..pn=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r:\
-	:tc=hp2621:
-
-hp2621b-p|hp 2621b with printer:\
-	:tc=hp+printer:tc=hp2621b:
-
-# hp2621b - new 2621b with new extended keyboard
-# these are closer to the new 26xx series than the other 2621b
-hp2621b-kx|hp 2621b with extended keyboard:\
-	:tc=newhpkeyboard:tc=hp2621b:
-
-hp2621b-kx-p|hp 2621b with new keyboard & printer:\
-	:tc=hp+printer:tc=hp2621b-kx:
-
-# Some assumptions are made in the following entries.
-# These settings are NOT set up by the initialization strings.
-#
-#    Port Configuration
-# RecvPace=Xon/Xoff	XmitPace=Xon/Xoff	StripNulDel=Yes
-#
-#    Terminal Configuration
-# InhHndShk(G)=Yes	InhDC2(H)=Yes
-# XmitFnctn(A)=No		InhEolWrp=No
-#
-#
-# Hp 2622a & hp2623a display and graphics terminals
-#
-hp2622|hp2622a|hp 2622:\
-	:da:db:\
-	:lm#0:pb#19200:\
-	:is=\E&dj@\r:tc=hp+pfk+cr:tc=hp+labels:tc=scrhp:
-
-# The 2623 is a 2622 with extra graphics hardware.
-hp2623|hp2623a|hp 2623:\
-	:tc=hp2622:
-
-hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer:\
-	:tc=hp+printer:tc=hp2624:
-
-# The hewlett packard B can have an optional extra 6 pages of memory.
-hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory:\
-	:lm#240:tc=hp2624:
-
-hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer:\
-	:lm#240:tc=hp2624b-p:
-
-# Color manipulations for HP terminals
-hp+color|hp with colors:\
-	:cc:\
-	:Co#16:NC#17:pa#7:\
-	:..Ip=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI:\
-	:oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I:\
-	:op=\E&v0S:sp=\E&v%dS:
-
-# :is: sets the screen to be 80 columns wide
-hp2397a|hp2397|hewlett packard 2397A color terminal:\
-	:is=\E&w6f80X:tc=memhp:tc=hp+labels:tc=hp+color:
-
-#  HP 700/44 Setup parameters:
-# Terminal Mode		HP-PCterm
-# Inhibit Auto Wrap	NO
-# Status Line		Host Writable
-# PC Character Set	YES
-# Twenty-Five Line Mode	YES
-# XON/XOFF		@128 or 64 (sc)
-# Keycode Mode 		NO   or YES (sc)
-# Backspace Key		BS or BS/DEL
-#
-# :is: 	sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
-# \E\\? does not turn off keycode mode
-# <smsc>	sets alternate start/stop; keycode on
-hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode:\
-	:am:eo:xn:xo:\
-	:co#80:li#25:\
-	:@7=\E[4~:RA=\E[?7l:S4=\E[>11h\EPO**x0/65;1/67\E\\:\
-	:S5=\E[>11l\EP1**x0/11;1/13\E[m\E\\:SA=\E[?7h:XF=g:XN=e:\
-	:ac=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263:\
-	:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\
-	:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
-	:ic=\E[@:im=:\
-	:is=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\:\
-	:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:k5=\E[21~:\
-	:k6=\E[23~:k7=\E[24~:k8=\E[25~:k9=\E[26~:k;=\E[28~:\
-	:kB=\E[Z:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[1~:kl=\E[D:\
-	:kr=\E[C:ku=\E[A:le=\E[D:me=\E[m:nd=\E[C:se=\E[m:sf=^J:\
-	:so=\E[7m:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:\
-	:vi=\E[?25l:
-#
-# (hp2392: copied :ei: here from hpex -- esr)
-hp2392|239x series:\
-	:co#80:\
-	:bt=\Ei:cm=\E&a%dy%dC:cv=\E&a%dY:ei=\ER:im=\EQ:k1=\Ep\r:\
-	:k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:k7=\Ev\r:\
-	:k8=\Ew\r:kF=\EU:kN=\Eu:kP=\Ev:kR=\EV:kh=\Eh:ue=\E&d@:\
-	:us=\E&dD:tc=hpsub:
-
-hpsub|hp terminals -- capability subset:\
-	:am:da:db:mi:xo:xs:\
-	:li#24:\
-	:al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%dC:cl=\EH\EJ:cr=^M:\
-	:dc=\EP:dl=\EM:do=\EB:if=/usr/share/tabset/stdcrt:\
-	:is=\E&s1A\E<\E&k0\\:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:\
-	:kr=\EC:ks=\E&s1A:ku=\EA:le=^H:me=\E&d@:nd=\EC:se=\E&d@:\
-	:sf=^J:so=\E&dB:ta=^I:up=\EA:
-
-# hpex:
-#	May be used for most 24 x 80 hp terminals,
-# but has no padding added, so may allow runover in some terminals at high
-# baud rates.  Will not work for hp2640a or hp2640b terminals, hp98x6 and
-# hp98x5 terminal emulators or hp98x6 consoles.
-# 	Adds xy-cursor addressing, vertical cursor addressing, home,
-# last line, and underline capabilities.
-#
-# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
-# moved :ei: here from hpsub -- esr)
-hpex|hp extended capabilites:\
-	:cm=\E&a%dy%dC:cr=^M:cv=\E&a%dY:do=^J:ei=\ER:im=\EQ:kb=^H:\
-	:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:ue=\E&d@:us=\E&dD:tc=hpsub:
-
-# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
-hp2|hpex2|hewlett-packard extended capabilities newer version:\
-	:am:da:db:mi:xs:\
-	:Nl#8:co#80:lh#2:li#24:lm#0:lw#8:sg#0:ug#0:\
-	:LF=\E&j@:LO=\E&jB:al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%dC:\
-	:cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:cv=\E&a%dY:\
-	:dc=\EP:dl=\EM:do=\EB:ei=\ER:im=\EQ:k1=\Ep:k2=\Eq:k3=\Er:\
-	:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kA=\EL:kC=\EJ:kD=\EP:\
-	:kE=\EK:kF=\ES:kH=\EF:kI=\EQ:kL=\EM:kM=\ER:kN=\EU:kP=\EV:\
-	:kR=\ET:kS=\EJ:kT=\E1:ka=\E3:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:\
-	:kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:ku=\EA:le=^H:me=\E&d@:\
-	:ml=\El:mu=\Em:nd=\EC:..pk=\E&f%p1%dk%p2%l%dL%p2%s:\
-	:..pl=\E&f1a%p1%dk%p2%l%dL%p2%s:\
-	:..pn=\E&f%p1%dk%p2%l%dd0L%p2%s:\
-	:..px=\E&f2a%p1%dk%p2%l%dL%p2%s:\
-	:..sa=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;:\
-	:se=\E&d@:sf=^J:so=\E&dB:st=\E1:ta=^I:ue=\E&d@:up=\EA:\
-	:us=\E&dD:
-
-# HP 236 console
-# From: <ddavis@ic.berkeley.edu>
-hp236|hp236 internal terminal emulator:\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\EG:ce=\EK:cl=\EF:cm=\EE%+ %+ :dc=\EJ:dl=\EH:ei=:ic=\EI:\
-	:im=:le=^H:me=\ECI:se=\ECI:so=\EBI:up=^K:ve=\EDE:vs=\EDB:
-
-# This works on a hp300 console running Utah 4.3 BSD
-# From: Craig Leres <leres@okeeffe.berkeley.edu>
-hp300h|HP Catseye console:\
-	:am:bs:da:db:mi:xs:\
-	:co#128:li#51:lm#0:sg#0:ug#0:\
-	:al=\EL:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:ch=\E&a%dC:\
-	:cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:cv=\E&a%dY:\
-	:dc=\EP:dl=\EM:do=\EB:ei=\ER:if=/usr/share/tabset/stdcrt:\
-	:im=\EQ:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:\
-	:ks=\E&s1A:ku=\EA:le=^H:me=\E&d@:nd=\EC:se=\E&d@:sf=^J:\
-	:so=\E&dB:ta=^I:ue=\E&d@:up=\EA:us=\E&dD:
-# From: Greg Couch <gregc@ernie.berkeley.edu>
-hp9837|hp98720|hp98721|HP 9000/300 workstations:\
-	:am:bs:da:db:mi:xs:\
-	:co#128:it#8:li#46:lm#0:\
-	:al=\EL:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:ch=\E&a%dC:\
-	:cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:ct=\E3:cv=\E&a%dY:dc=\EP:\
-	:dl=\EM:do=\EB:ei=\ER:im=\EQ:is=\E&v0m1b0i&j@:kA=\EL:\
-	:kD=\EP:kE=\EK:kI=\EQ:kL=\EM:kN=\EU:kP=\EV:kS=\EJ:kb=^H:\
-	:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:ku=\EA:\
-	:le=^H:me=\E&d@:nd=\EC:se=\E&v0S:sf=^J:so=\E&v5S:st=\E1:\
-	:ta=^I:ue=\E&d@:up=\EA:us=\E&dD:
-# HP 9845 desktop computer from BRL
-# (hp9845: removed unknown capability :gu: -- esr)
-hp9845|HP 9845:\
-	:am:bs:da:db:eo:mi:xs:\
-	:co#80:li#21:\
-	:al=\EL:bc=\ED:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\E&a%r%2c%2Y:\
-	:dc=\EP:dl=\EM:ei=\ER:if=/usr/share/tabset/std:im=\EQ:\
-	:nd=\EC:se=\E&d@:so=\E&dB:up=\EA:
-# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
-# (hp98550: replaced /usr/share/tabset/9837 with std because :it#8:,:st=\E1:;
-# added empty <acsc> to avoid warnings re :as:/:ae: --esr)
-hp98550|hp98550a|HP 9000 Series 300 color console:\
-	:am:bs:da:db:mi:xs:\
-	:co#128:it#8:li#49:lm#0:\
-	:ac=:ae=^O:al=\EL:as=^N:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:\
-	:ch=\E&a%dC:cl=\EH\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:\
-	:cv=\E&a%dY:dc=\EP:dl=\EM:do=^J:ei=\ER:\
-	:if=/usr/share/tabset/std:im=\EQ:k1=\Ep:k2=\Eq:k3=\Er:\
-	:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kA=\EL:kC=\EJ:kD=\EP:\
-	:kE=\EK:kF=\ES:kH=\EF:kI=\EQ:kL=\EM:kM=\ER:kN=\EU:kP=\EV:\
-	:kR=\ET:kS=\EJ:kT=\E1:ka=\E3:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:\
-	:kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:ku=\EA:le=^H:mb=\E&dA:\
-	:md=\E&dJ:me=\E&d@:mh=\E&dH:mk=\E&ds:mr=\E&dJ:nd=\EC:\
-	:se=\E&d@:sf=^J:so=\E&dJ:st=\E1:ta=^I:ue=\E&d@:up=\EA:\
-	:us=\E&dD:ve=\E*dQ:vi=\E*dR:
-# From: Victor Duchovni <vic@fine.princeton.edu>
-# (hp700-wy: removed obsolete ":nl=^J:";
-# replaced /usr/share/tabset/hp700-wy with std because :it#8:,:st=\E1: -- esr)
-hp700-wy|HP700/41 emulating wyse30:\
-	:am:bs:bw:mi:ms:\
-	:co#80:it#8:li#24:sg#1:ug#1:\
-	:al=0.7*\EE:bt=\EI:cd=\EY:ce=10\ET:cl=^Z:cm=\E=%+ %+ :\
-	:cr=^M:ct=\E0:cv=\E[%+ :dc=\EW:dl=\ER:do=^V:ei=\Er:ho=^^:\
-	:i1=\E~"\EC\Er\E(\EG0\003\E`9\E`1:\
-	:if=/usr/share/tabset/stdcrt:im=\Eq:kB=\EI:kC=^Z:kE=\ET:\
-	:kI=\Eq:kM=\Er:kS=\EY:kT=\EI:kb=\177:kd=^V:kh=^^:kl=^H:kr=^L:\
-	:ku=^K:le=^H:ll=^^^K:me=10\EG0:nd=^L:se=10\EG0:so=10\EG4:\
-	:sr=\Ej:st=\E1:ta=^I:ue=10\EG0:up=^K:us=10\EG8:
-hp70092|hp70092a|hp70092A|HP 700/92:\
-	:am:da:db:xs:\
-	:Nl#8:co#80:lh#2:li#24:lm#0:lw#8:\
-	:LF=\E&j@:LO=\E&jB:ac=0cjgktlrmfn/q,t5u6v8w7x.:ae=^O:\
-	:al=\EL:as=^N:bl=^G:bt=\Ei:ce=\EK:ch=\E&a%dC:\
-	:cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:cv=\E&a%dY:\
-	:dc=\EP:dl=\EM:do=\EB:ei=\ER:im=\EQ:k1=\Ep:k2=\Eq:k3=\Er:\
-	:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kA=\EL:kC=\EJ:kD=\EP:\
-	:kE=\EK:kF=\ES:kH=\EF:kI=\EQ:kL=\EM:kM=\ER:kN=\EU:kP=\EV:\
-	:kR=\ET:kS=\EJ:kT=\E1:ka=\E3:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:\
-	:kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:ku=\EA:le=^H:mb=\E&dA:\
-	:md=\E&dB:me=\E&d@:mh=\E&dH:mr=\E&dB:nd=\EC:se=\E&d@:\
-	:so=\E&dJ:sr=\ET:st=\E1:ta=^I:ue=\E&d@:up=\EA:us=\E&dD:
-
-bobcat|sbobcat|HP 9000 model 300 console:\
-	:am:da:db:mi:xs:\
-	:co#128:it#8:li#47:sg#0:ug#0:\
-	:al=10*\EL:bt=\Ei:cd=\EJ:ce=\EK:ch=6\E&a%dC:cl=\EH\EJ:\
-	:cm=6\E&a%dy%dC:cr=^M:cv=6\E&a%dY:dc=\EP:dl=10*\EM:do=\EB:\
-	:ei=\ER:im=\EQ:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:\
-	:ks=\E&s1A:ku=\EA:le=^H:me=\E&d@:nd=\EC:nw=^M^J:se=\E&d@:\
-	:sf=^J:so=\E&dB:ta=^I:ue=\E&d@:up=\EA:us=\E&dD:
-gator-t|HP 9000 model 237 emulating extra-tall AAA:\
-	:li#94:tc=gator:
-gator|HP 9000 model 237 emulating AAA:\
-	:bw:km:mi:ul:\
-	:co#128:it#8:li#47:\
-	:AL=1*\E[%dL:DC=4\E[%dP:DL=1*\E[%dM:IC=4\E[%d@:al=\E[L:\
-	:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%d`:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=:ho=\E[H:\
-	:ic=\E[@:im=:kb=^H:kd=^J:kl=^H:le=^H:me=\E[m:mr=\E[7m:\
-	:nd=\E[C:nw=^M^J:rp=1*%.\E[%db:se=\E[m:so=\E[7m:ta=^I:\
-	:ue=\E[m:up=\EM:us=\E[4m:
-gator-52|HP 9000 model 237 emulating VT52:\
-	:co#128:li#47:tc=vt52:
-gator-52t|HP 9000 model 237 emulating extra-tall VT52:\
-	:li#94:tc=gator-52:
-
-#### Honeywell-Bull
-#
-# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
-#
-
-# Honeywell Bull terminal.  Its cursor and function keys send single
-# control characters and it has standout/underline glitch.  Most programs
-# do not like these features/bugs.  Visual bell is realized by flashing the
-# "keyboard locked" LED.
-dku7003-dumb|Honeywell Bull DKU 7003 dumb mode:\
-	:co#80:li#25:\
-	:cd=^_:ce=\E[K:cl=^]^_:cm=\E[%i%d;%dH:cr=^M:do=^K:ho=^]:\
-	:kb=^H:kd=^K:kh=^]:kl=^Y:kr=^X:ku=^Z:le=^Y:nd=^X:nw=^M^J:\
-	:sf=^J:ta=^I:up=^Z:vb=\E[2h\E[2l:
-dku7003|Honeywell Bull DKU 7003 all features described:\
-	:ms:\
-	:sg#1:ug#1:\
-	:mb=\E[5m:md=\E[7m:me=\E[m:mh=\E[2m:mr=\E[7m:se=\E[m:\
-	:so=\E[7m:ue=\E[m:us=\E[4m:tc=dku7003-dumb:
-
-#### Lear-Siegler (adm)
-#
-# These guys are long since out of the terminals business, but
-# in 1995 many current terminals still have an adm type as one of their
-# emulations (usually their stupidest, and usually labeled adm3, though
-# these `adm3' emulations normally have adm3a+ capabilities).
-#
-# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
-# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
-# was being held to ground would trigger a send of the top line on the screen.
-# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
-# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
-# for clearing up this point.)
-
-adm1a|adm1|lsi adm1a:\
-	:am:\
-	:co#80:li#24:\
-	:bl=^G:cl=\E;:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:le=^H:nd=^L:\
-	:sf=^J:up=^K:
-adm2|lsi adm2:\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :cr=^M:\
-	:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:kd=^J:kh=^^:kl=^H:\
-	:kr=^L:ku=^K:le=^H:nd=^L:sf=^J:up=^K:
-# (adm3: removed obsolete ":ma=^K^P:" -- esr)
-adm3|lsi adm3:\
-	:am:bs:\
-	:co#80:li#24:\
-	:bl=^G:cl=^Z:cr=^M:do=^J:le=^H:sf=^J:
-# The following ADM-3A switch settings are assumed for normal operation:
-#	SPACE		U/L_DISP	CLR_SCRN	24_LINE
-#	CUR_CTL		LC_EN		AUTO_NL		FDX
-# Other switches may be set for operator convenience or communication
-# requirements.  I recommend
-#	DISABLE_KB_LOCK	LOCAL_OFF	103		202_OFF
-#	ETX_OFF		EOT_OFF
-# Most of these terminals required an option ROM to support lower case display.
-# Open the case and look at the motherboard; if you see an open 24-pin DIP
-# socket, you may be out of luck.
-#
-# (adm3a: some capabilities merged in from BRl entry -- esr)
-adm3a|lsi adm3a:\
-	:am:bs:\
-	:co#80:li#24:\
-	:bl=^G:cl=1\032:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:kd=^J:kl=^H:\
-	:kr=^L:ku=^K:le=^H:ma=^K^P:nd=^L:nl=^J:rs=^N:sf=^J:up=^K:
-adm3a+|adm3a plus:\
-	:kb=^H:tc=adm3a:
-# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
-adm5|lsi adm5:\
-	:sg#1:\
-	:bl=^G:cd=\EY:ce=\ET:cr=^M:do=^J:kb=^H:kh=^^:se=\EG:so=\EG:\
-	:tc=adm3a+:
-# A lot of terminals other than adm11s use these.  Wherever you see
-# use=adm+sgr with some of its capabilities disabled, try the
-# disabled ones.  They may well work but not have been documented or
-# expressed in the using entry.  We'd like to cook up an :sa: but the
-# :ae:/:as: sequences of the using entries vary too much.
-adm+sgr|adm style highlight capabilities:\
-	:me=\EG0:mk=\EG1:mr=\EG4:se=\EG0:so=\EG4:ue=\EG0:us=\EG8:
-# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
-# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
-# :kh: from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>.  :cl: could also
-# be ^Z, according to his entry.
-# (adm11: :us:=\EG4 was obviously erroneous because it also said
-# :mr:=\EG4.  Looking at other ADMs confirms this -- esr)
-adm11|LSI ADM-11:\
-	:am:bs:hs:\
-	:co#80:kn#8:li#24:\
-	:bl=^G:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :cr=^M:do=^J:ds=\Eh:\
-	:fs=\E(\r:ho=^^:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
-	:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:kb=^H:kd=^J:kh=^^:\
-	:kl=^H:kr=^L:ku=^K:le=^H:mb=\EG2:nd=^L:nl=^J:nw=^M^J:ta=^I:\
-	:ts=\EF\E):up=^K:tc=adm+sgr:
-# From: Andrew Scott Beals <bandy@lll-crg.ARPA>
-# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
-# Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
-# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :".  This formerly had
-# :is:=\Eq but that looked wrong; this :is: is from Dave Yost <esquire!yost>
-# via BRL.  That entry asserted :sg#1:, but I've left that out because
-# neither earlier nor later ADMSs have it -- esr)
-#
-# You will need to get into the supervisor setup before you can set
-# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
-# see a lot more setup options.
-#
-# While in supervisor setup you can also use following codes:
-#
-# Ctrl-P Personality character selections (configure for example what
-#        arrow keys send, if I recall correctly)
-# Ctrl-T tabs 1-80   use left&right to move and up to set and
-# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
-# Ctrl-B Binary setup (probably not needed. I think that everything can
-#        be set using normal setup)
-# Ctrl-A Answerback mode (enter answerback message)
-# Ctrl-U User friendly mode (normal setup)
-# Ctrl-D Defaults entire setup and function keys from EPROM tables
-# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
-# Ctrl-R Reads both setup and functions keys from NVM.
-# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
-#
-# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
-# RTS/CTS used nowadays with virtually every modem and computer. 19200
-# bps works fine with hardware flow control.
-#
-# The following null-modem cable should fix this and enable you to use
-# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
-# set ADM-12+ for DTR handshaking from supervisor setup.
-#
-# PC Serial   ADM-12+
-#  --------   -------
-#         2 - 3
-#         3 - 2
-#         4 - 5
-#         5 - 20
-#       6,8 - 4
-#         7 - 7
-#        20 - 6,8
-#
-adm12|lsi adm12:\
-	:am:bs:mi:pt:\
-	:co#80:it#8:li#24:ug#1:\
-	:al=\EE:bl=^G:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:ct=\E0:\
-	:dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:ic=\EQ:im=\Eq:\
-	:is=\E0        \E1        \E1        \E1        \E1        \E1        \E1        \E1        \E1:\
-	:k0=^A0\r:k1=^A1\r:k2=^A2\r:k3=^A3\r:k4=^A4\r:k5=^A5\r:\
-	:k6=^A6\r:k7=^A7\r:k8=^A8\r:k9=^A9\r:kd=^J:kl=^H:kr=^L:\
-	:ku=^K:le=^H:nd=^L:st=\E1:up=^K:tc=adm+sgr:
-# (adm20: removed obsolete ":kn#7:" -- esr)
-adm20|lear siegler adm20:\
-	:am:bs:\
-	:co#80:it#8:li#24:\
-	:al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:\
-	:cm=\E=%i%r%+^_%+^_:cr=^M:dc=\EW:dl=\ER:ei=:ho=^^:ic=\EQ:\
-	:im=:k1=^A:k2=^B:k3=^W:k4=^D:k5=^E:k6=^X:k7=^Z:le=^H:me=\E(:\
-	:nd=^L:se=\E(:so=\E):ta=^I:up=^K:
-adm21|lear siegler adm21:\
-	:sg#1:\
-	:al=30*\EE:bl=^G:cd=\EY:ce=\ET:cr=^M:dc=\EW:dl=30*\ER:do=^J:\
-	:ei=:ic=\EQ:im=:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:mk@:sf=^J:\
-	:tc=adm+sgr:tc=adm3a:
-# (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
-# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
-# removed bogus-looking \200 from before :cm:. -- esr)
-adm22|lsi adm22:\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\EE:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E+:cm=\E=%+ %+ :\
-	:cr=^M:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:\
-	:is=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:l1=F1:l2=F2:\
-	:l3=F3:l4=F4:l5=F5:l6=F6:l7=F7:le=^H:me=\E(:nd=^L:se=\E(:\
-	:so=\E):ta=\Ei:up=^K:
-# ADM 31 DIP Switches
-#
-# This information comes from two versions of the manual for the
-# Lear-Siegler ADM 31.
-#
-# Main board:
-#                  rear of case
-#   +-||||-------------------------------------+
-#   + S1S2                              ||S    +
-#   +                                   ||3    +
-#   +                                          +
-#   +                                ||S       +
-#   +                                ||4       +
-#   +                                          +
-#   +                                          +
-#   +                                          +
-#   +                                          +
-#   +                                          +
-# +-+                                          +-+
-# +                                              +
-# +                               S5 S6 S7       +
-# +                               == == ==       +
-# +----------------------------------------------+
-#            front of case (keyboard)
-#
-#  S1 - Data Rate - Modem
-#  S2 - Data Rate - Printer
-# ------------------------
-# Data Rate   Setting
-# -------------------
-# 50          0 0 0 0
-# 75          1 0 0 0
-# 110         0 1 0 0
-# 134.5       1 1 0 0
-# 150         0 0 1 0
-# 300         1 0 1 0
-# 600         0 1 1 0
-# 1200        1 1 1 0
-# 1800        0 0 0 1
-# 2000        1 0 0 1
-# 2400        0 1 0 1
-# 3600        1 1 0 1
-# 4800        0 0 1 1
-# 7200        1 0 1 1
-# 9600        0 1 1 1
-# x           1 1 1 1
-#
-# S3 - Interface/Printer/Attributes
-# ---------------------------------
-# Printer Busy Control
-# sw1   sw2   sw3
-# ---------------
-# off   off   off   Busy not active, CD disabled
-# off   off   on    Busy not active, CD enabled
-# off   on    off   Busy active on J5-20, CD disabled
-# on    off   off   Busy active on J5-19, CD disabled - Factory Set.
-# on    off   on    Busy active on J5-19, CD enabled
-#
-# sw4   Used in conjuction with S4 for comm interface control - Fact 0
-#
-# sw5   Secondary Channel Control (Hardware implementation only) - Fact 0
-#
-# sw6   ON enables printer BUSY active LOW - Factory Setting
-#       OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
-#
-# sw7   ON - steady cursor - Factory Setting
-#       OFF - blinking cursor
-#
-# sw8   ON causes selected attribute character to be displayed
-#       OFF causes SPACE to be displayed instead - Factory Setting
-#
-# S4 - Interface
-# --------------
-# Modem Interface
-# S3    S4    S4    S4    S4
-# sw4   sw1   sw2   sw3   sw4
-# ---------------------------
-# OFF   ON    OFF   ON    OFF   Enable RS-232C interface, Direct Connect and
-#                               Current Loop disabled - Factory Setting
-# ON    ON    OFF   ON    OFF   Enable Current Loop interface, Direct Connect
-#                               disabled
-# OFF   OFF   ON    OFF   ON    Enable Direct Connect interface, RS-232C and
-#                               Current Loop Disabled
-#
-# sw5   ON disables dot stretching mode - Factory Setting
-#       OFF enables dot stretching mode
-# sw6   ON enables blanking function
-#       OFF enables underline function - Factory Setting
-# sw7   ON causes NULLS to be displayed as NULLS
-#       OFF causes NULLS to be displayed as SPACES - Factory Setting
-#
-# S5 - Word Structure
-# -------------------
-# sw1   ON enables BREAK key - Factory Setting
-#       OFF disables BREAK key
-# sw2   ON selects 50Hz monitor refresh rate
-#       OFF selects 60Hz monitor refresh rate - Factory Setting
-#
-# Modem Port Selection
-# sw3   sw4   sw5
-# ---------------
-# ON    ON    ON    Selects 7 DATA bits, even parity, 2 STOP bits
-# OFF   ON    ON    Selects 7 DATA bits, odd  parity, 2 STOP bits
-# ON    OFF   ON    Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
-# OFF   OFF   ON    Selects 7 DATA bits, odd  parity, 1 STOP bit
-# ON    ON    OFF   Selects 8 DATA bits, no   parity, 2 STOP bits
-# OFF   ON    OFF   Selects 8 DATA bits, no   parity, 1 STOP bit
-# ON    OFF   OFF   Selects 8 DATA bits, even parity, 1 STOP bit
-# OFF   OFF   OFF   Selects 8 DATA bits, odd  parity, 1 STOP bit
-#
-# sw6   ON  sends bit 8 a 1 (mark)
-#       OFF sends bit 8 as 0 (space) - Factory Setting
-# sw7   ON  selects Block Mode
-#       OFF selects Conversation Mode - Factory Setting
-# sw8   ON  selects Full Duplex operation
-#       OFF selects Half Duplex operation - Factory Setting
-#
-# S6 - Printer
-# ------------
-# sw1, sw2, sw6, sw7   Reserved - Factory 0
-#
-# Printer Port Selection
-# same as Modem above, bit 8 (when 8 DATA bits) is always = 0
-#
-# sw8   ON   enables Printer Port
-#       OFF disables Printer Port - Factory Setting
-#
-# S7 - Polling Address
-# --------------------
-# sw1-7 Establish ASCII character which designates terminal polling address
-#       ON  = logic 0
-#       OFF = logic 1 - Factory Setting
-# sw8   ON   enables Polling Option
-#       OFF disables Polling Option - Factory Setting
-#
-#
-# On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
-#
-# This adm31 entry uses underline as the standout mode.
-# If the adm31 gives you trouble with standout mode, check the DIP switch in
-# position 6, bank @c11, 25% from back end of the circuit board.  Should be
-# OFF.  If there is no such switch, you have an old adm31 and must use oadm31.
-# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
-adm31|lsi adm31 with sw6 set for underline mode:\
-	:am:bs:mi:\
-	:co#80:li#24:\
-	:al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :cr=^M:\
-	:dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:is=\Eu\E0:k0=^A0\r:\
-	:k1=^A1\r:k2=^A2\r:k3=^A3\r:k4=^A4\r:k5=^A5\r:k6=^A6\r:\
-	:k7=^A7\r:k8=^A8\r:k9=^A9\r:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:\
-	:me=\EG0:nd=^L:se=\EG0:sf=^J:so=\EG1:ue=\EG0:up=^K:us=\EG1:
-adm31-old|o31|old adm31:\
-	:so=\EG4:ue@:us@:tc=adm31:
-# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
-adm36|LSI ADM36:\
-	:bs:pt:\
-	:kn#4:\
-	:if=/usr/lib/tabset/vt100:\
-	:is=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l:\
-	:tc=vt100:
-# (adm42: removed obsolete ":ma=^K^P:" -- esr)
-adm42|lsi adm42:\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :\
-	:cr=^M:dc=\EW:dl=\ER:do=^J:ei=\Er:im=\Eq:ip=:kd=^J:kh=^^:\
-	:kl=^H:kr=^L:ku=^K:le=^H:mk@:nd=^L:pc=\177:sf=^J:ta=^I:ue@:\
-	:up=^K:us@:vs=\EC\E3 \E3(:tc=adm+sgr:
-# The following termcap for the Lear Siegler ADM-42 leaves the
-# "system line" at the bottom of the screen blank (for those who
-# find it distracting otherwise)
-adm42-ns|lsi adm-42 with no system line:\
-	:al=\EE\EF \011:bt=\EI\EF \011:cd=\EY\EF \011:\
-	:ce=\ET\EF \011:cl=\E;\EF \011:cm=\E=%+ %+ \EF \011:\
-	:dc=\EW\EF \011:dl=\ER\EF \011:ei=\Er\EF \011:\
-	:im=\Eq\EF \011:tc=adm42:
-# ADM 1178 terminal -- rather like an ADM-42.  Manual is dated March 1 1985.
-# The insert mode of this terminal is commented out because it's broken for our
-# purposes in that it will shift the position of every character on the page,
-# not just the cursor line!
-# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
-adm1178|1178|lsi adm1178:\
-	:am:\
-	:co#80:li#24:sg#1:ug#1:\
-	:al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :\
-	:cr=^M:dc=\EW:dl=\ER:do=^J:ho=^^:ip=6*:kb=^H:kd=^J:kl=^H:\
-	:le=^H:md=\E(:me=\E):mr=\EG4:nd=^L:nw=^M^J:pc=\177:se=\EG0:\
-	:sf=^J:so=\EG4:ta=^I:ue=\EG0:up=^K:us=\EG1:vs=\EC\E3 \E3(:
-
-#### Prime
-#
-# Yes, Prime made terminals.  These entries were posted by Kevin J. Cummings
-# <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
-# Prime merged with ComputerVision in the late 1980s; you can reach them at:
-#
-#	ComputerVision Services
-#	500 Old Connecticut Path
-#	Framingham, Mass.
-#
-
-# Standout mode is dim reverse-video.
-pt100|pt200|wren|fenix|prime pt100/pt200:\
-	:am:bw:mi:ms:\
-	:co#80:it#8:li#24:\
-	:DC=\E[%dP:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
-	:al=\E[L\E[t:bt=\E[Z:cd=\E[J\E[r:ce=\E[K\E[t:cl=\E?:\
-	:cm=\E0%+!%+!:cr=^M:dc=\E[P:dl=\E[M:do=\ED:ei=\E[4l:\
-	:ho=\E$B:im=\E[4h:kb=^H:kd=\E[B:ke=\E[>13l:kh=\E$A:kl=\E[D:\
-	:kr=\E[C:ks=\E[>13h:ku=\E[A:le=^H:me=\E[m:mh=\E[2m:nd=\E[C:\
-	:nw=^M^J:se=\E[m:sf=^J:so=\E[2;7m:ta=^I:te=:\
-	:ti=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q:\
-	:ue=\E[m:up=\EM:us=\E[4m:vb=\E$\E$P:
-pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode:\
-	:co#132:\
-	:cm=\E[%i%d;%dH:tc=pt100:
-pt250|Prime PT250:\
-	:se@:so@:tc=pt100:
-pt250w|Prime PT250 in 132-column mode:\
-	:se@:so@:tc=pt100w:
-
-#### Qume (qvt)
-#
-#	Qume, Inc.
-#	3475-A North 1st Street
-#	San Jose CA 95134
-#	Vox: (800)-457-4447
-#	Fax: (408)-473-1510
-#	Net: josed@techsupp.wyse.com (Jose D'Oliveira)
-#
-# Qume was bought by Wyse, but still (as of early 1995) has its own support
-# group and production division.
-#
-# Discontinued Qume models:
-#
-# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
-# built to replace them, and a qvt119+ which was a 101+ with available wide
-# mode (132 columns).  There was a qvt103 which added vt100/vt131 emulations
-# and an ANSI-compatible qvt203 that replaced it.  Qume started producing
-# ANSI-compatible terminals with the qvt323 and qvt61.
-#
-# Current Qume models (as of February 1995):
-#
-# All current Qume terminals have ANSI-compatible operation modes.
-# Qume is still producing the qvt62, which features emulations for other
-# popular lines such as ADDS, and dual-host capabilities.  The qvt82 is
-# designed for use as a SCO ANSI terminal.  The qvt70 is a color terminal
-# with many emulations including Wyse370, Wyse 325, etc.  Their newest
-# model is the qvt520, which is vt420-compatible.
-#
-# There are some ancient printing Qume terminals under `Daisy Wheel Printers'
-#
-# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
-# setup mode.  Shift-s should be a configuration save to NVRAM.
-
-qvt101|qvt108|qume qvt 101 and QVT 108:\
-	:sg#1:tc=qvt101+:
-
-# This used to have :vs=\E.2: but no :ve: or :vi:.  The BSD termcap
-# file had :vs=\EM4 \200\200\200:.  I've done the safe thing and yanked
-# both. The :mr: is from BSD, which also claimed bold=\E( and dim=\E).
-# What seems to be going on here is that this entry was designed so that
-# the normal highlight is bold and standout is dim plus something else
-# (reverse-video maybe?  But then, are there two :mr: sequences?)
-qvt101+|qvt101p|qume qvt 101 PLUS product:\
-	:am:bw:hs:ul:\
-	:co#80:li#24:sg#0:\
-	:al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:\
-	:ct=\E3:dc=\EW:dl=\ER:do=^J:ds=\Eg\Ef\r:ei=:fs=^M:ho=^^:\
-	:ic=\EQ:im=:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\
-	:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:\
-	:kB=\EI:kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:\
-	:kr=^L:ku=^K:le=^H:mk@:nd=^L:pf=\EA:po=\E@:se=\E(:sf=^J:\
-	:so=\E0P\E):st=\E1:ta=^I:ts=\Eg\Ef:up=^K:vb=\Eb\Ed:ve=\E.4:\
-	:tc=adm+sgr:
-qvt102|qume qvt 102:\
-	:ve=\E.:tc=qvt101:
-# (qvt103: added <rmam>/<smam> based on init string -- esr)
-qvt103|qume qvt 103:\
-	:am:xn:xo:\
-	:co#80:it#8:li#24:vt#3:\
-	:DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
-	:UP=\E[%dA:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=^J:\
-	:ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:\
-	:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:rc=\E8:\
-	:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:..sa=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>:\
-	:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:\
-	:up=\E[A:us=\E[4m:
-qvt103-w|qume qvt103 132 cols:\
-	:co#132:li#24:\
-	:rs=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=qvt103:
-qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals:\
-	:am:hs:mi:ms:\
-	:co#80:li#24:sg#0:ug#0:\
-	:al=\EE:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E*1:cm=\E=%+ %+ :\
-	:cr=^M:ct=\E3:dc=\EW:dl=\ER:do=^J:ds=\Eg\Ef\r:ei=\Er:fs=^M:\
-	:ho=^^:im=\Eq:is=\EDF\EC\EG0\Er\E(\E%EX:k0=^AI\r:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:\
-	:ku=^K:le=^H:nd=^L:pf=\EA:po=\E@:sf=^J:sr=\EJ:st=\E1:ta=^I:\
-	:ts=\Eg\Ef:up=^K:us=\EG8:vb=\En0\En1:ve=\E.4:vs=\E.2:\
-	:tc=adm+sgr:
-qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines:\
-	:li#25:tc=qvt119+:
-qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode:\
-	:co#132:\
-	:is=\EDF\EC\EG0\Er\E(\E%\EX\En4:tc=qvt119+:
-qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25:\
-	:li#25:tc=qvt119+:
-qvt203|qvt203+|qume qvt 203 Plus:\
-	:al=\E[L:dc=\E[P:dl=\E[M:ei=\E[4l:im=\E[4h:ip=:k0=\E[29~:\
-	:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:k5=\E[21~:\
-	:k6=\E[23~:k7=\E[24~:k8=\E[25~:k9=\E[28~:sf=\n:tc=qvt103:
-qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video):\
-	:co#132:li#24:\
-	:rs=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=qvt203:
-#
-#	Since a command is present for enabling 25 data lines,
-#	a specific terminfo entry may be generated for the 203.
-#	If one is desired for the QVT 119 PLUS then 25 lines must
-#	be selected in the status line (setup line 9).
-#
-qvt203-25|QVT 203 PLUS with 25 by 80 column mode:\
-	:co#80:li#25:\
-	:is=\E[=40h\E[?3l:tc=qvt203:
-qvt203-25-w|QVT 203 PLUS with 25 by 132 columns:\
-	:co#132:li#25:\
-	:rs=\E[?3h\E[=40h:tc=qvt203:
-
-#### Televideo (tvi)
-#
-#	TeleVideo
-#	550 East Brokaw Road
-#	PO Box 49048    95161
-#	San Jose CA 95112
-#	Vox: (408)-954-8333
-#	Fax: (408)-954-0623
-#
-#
-# There are some tvi terminals that require incredible amounts of padding and
-# some that don't.  I'm assuming tvi912 and tvi920 are the old slow ones, and
-# tvi912b, tvi912c, tvi920b, tvi920c are the new ones that don't need padding.
-#
-# All of these terminals (912 to 970 and the tvipt) are discontinued.  Newer
-# Televideo terminals are ANSI and PC-ANSI compatible.
-
-tvi803|televideo 803:\
-	:cl=\E*:tc=tvi950:
-
-# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
-# Switch settings are:
-#
-# S1  1 2 3 4
-#     D D D D  9600
-#     D D D U    50
-#     D D U D    75
-#     D D U U   110
-#     D U D D   135
-#     D U D U   150
-#     D U U D   300
-#     D U U U   600
-#     U D D D  1200
-#     U D D U  1800
-#     U D U D  2400
-#     U D U U  3600
-#     U U D D  4800
-#     U U D U  7200
-#     U U U D  9600
-#     U U U U 19200
-#
-# S1  5 6 7 8
-#     U D X D  7N1 (data bits, parity, stop bits) (X means ignored)
-#     U D X U  7N2
-#     U U D D  7O1
-#     U U D U  7O2
-#     U U U D  7E1
-#     U U U U  7E2
-#     D D X D  8N1
-#     D D X U  8N2
-#     D U D D  8O1
-#     D U U U  8E2
-#
-# S1  9  Autowrap
-#     U  on
-#     D  off
-#
-# S1 10  CR/LF
-#     U  do CR/LF when CR received
-#     D  do CR when CR received
-#
-# S2  1  Mode
-#     U  block
-#     D  conversational
-#
-# S2  2  Duplex
-#     U  half
-#     D  full
-#
-# S2  3  Hertz
-#     U  50
-#     D  60
-#
-# S2  4  Edit mode
-#     U  local
-#     D  duplex
-#
-# S2  5  Cursor type
-#     U  underline
-#     D  block
-#
-# S2  6  Cursor down key
-#     U  send ^J
-#     D  send ^V
-#
-# S2  7  Screen color
-#     U  green on black
-#     D  black on green
-#
-# S2  8  DSR status (pin 6)
-#     U  disconnected
-#     D  connected
-#
-# S2  9  DCD status (pin 8)
-#     U  disconnected
-#     D  duplex
-#
-# S2 10  DTR status (pin 20)
-#     U  disconnected
-#     D  duplex
-# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added :kh:, :le:, :do:,
-# :sf:, <hpa>, <vpa>, :am:, :ms: from SCO entry -- esr)
-tvi910|televideo model 910:\
-	:am:bs:ms:\
-	:co#80:it#8:li#24:sg#1:\
-	:bl=^G:bt=\EI:cd=\EY:ce=\ET:ch=\E]%+ :cl=^Z:cm=\E=%+ %+ :\
-	:cr=^M:cv=\E[%+ :do=^J:ho=\E=\001\001:\
-	:if=/usr/share/tabset/stdcrt:k0=^AI\r:k1=^A@\r:k2=^AA\r:\
-	:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:\
-	:k9=^AH\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:mk@:nd=^L:\
-	:sf=^J:ta=^I:up=^K:tc=adm+sgr:
-# From: Alan R. Rogers <rogers%albany@csnet-relay>
-# as subsequently hacked over by someone at SCO
-# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
-#
-# Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
-#
-# S1  1 2 3 4:
-#     D D D D  9600     D D D U    50     D D U D    75     D D U U   110
-#     D U D D   135     D U D U   150     D U U D   300     D U U U   600
-#     U D D D  1200     U D D U  1800     U D U D  2400     U D U U  3600
-#     U U D D  4800     U U D U  7200     U U U D  9600     U U U U 19200
-#
-# S1  5 6 7 8:
-#     U D X D  7N1     U D X U  7N2     U U D D  7O1     U U D U  7O2
-#     U U U D  7E1     U U U U  7E2     D D X D  8N1     D D X U  8N2
-#     D U D D  8O1     D U U U  8E2
-#
-# S1  9  Autowrap            (U = on, D = off)
-# S1 10  CR/LF               (U = CR/LF on CR received, D = CR on CR received)
-# S2  1  Mode                (U = block, D = conversational)
-# S2  2  Duplex              (U =  half, D = full)
-# S2  3  Hertz               (U = 50, D = 60)
-# S2  4  Edit mode           (U = local, D = duplex)
-# S2  5  Cursor type         (U = underline, D = block)
-# S2  6  Cursor down key     (U = send ^J, D = send ^V)
-# S2  7  Screen color       (U = green on black, D = black on green)
-# S2  8  DSR status (pin 6)  (U = disconnected, D = connected)
-# S2  9  DCD status (pin 8)  (U = disconnected, D = connected)
-# S2 10  DTR status (pin 20) (U = disconnected, D = connected)
-#
-tvi910+|televideo 910+:\
-	:al=\EE:dc=\EW:dl=\ER:ei=:ho=^^:ic=\EQ:im=:k0=^A@\r:k1=^AA\r:\
-	:k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:\
-	:k8=^AH\r:k9=^AI\r:ll=\E=7\s:tc=tvi910:
-
-# (tvi912: removed obsolete ":ma=^K^P^L :", added  :vb: and
-# :kh: from BRL entry -- esr)
-tvi912|tvi914|tvi920|old televideo 912/914/920:\
-	:am:bs:ms:pt:\
-	:co#80:it#8:li#24:sg#1:ug#1:\
-	:al=\EE:bl=^G:cd=\Ey:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:ct=\E3:\
-	:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:\
-	:if=/usr/share/tabset/stdcrt:im=:k0=^AI\r:k1=^A@\r:\
-	:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:\
-	:k8=^AG\r:k9=^AH\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\
-	:nd=^L:se=\Ek:sf=^J:so=\Ej:st=\E1:ta=^I:ue=\Em:up=^K:us=\El:\
-	:vb=\Eb\Ed:
-# the 912 has a <funct> key that's like shift: <funct>8 xmits "^A8\r".
-# The 920 has this plus real function keys that xmit different things.
-# Terminfo makes you use the funct key on the 912 but the real keys on the 920.
-tvi912c|tvi912b|new televideo 912:\
-	:al=\EE:dl=\ER:tc=tvi912:
-# set to page 1 when entering curses application (\E-17 )
-# reset to page 0 when exiting curses application (\E-07 )
-tvi912-2p|tvi920-2p|tvi-2p|televideo w/2 pages:\
-	:te=\E-07\s:ti=\E-17\s:tc=tvi912:
-# We got some new tvi912c terminals that act really weird on the regular
-# termcap, so one of our gurus worked this up. Seems that cursor
-# addressing is broken.
-tvi912cc|tvi912 at cowell college:\
-	:cm@:tc=tvi912c:
-
-# Here are the switch settings for the tvi920c:
-#
-# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
-# 2: 9600	3: 4800		4: 2400		5: 1200
-# 6:  600	7:  300		8:  150		9:   75
-# 10: 110
-#
-# S2 UART/Terminal options:
-# 		Up			Down
-# 1:		Not used		Not allowed
-# 2:	Alternate character set	  Standard character set
-# 3:	    Full duplex		    Half duplex
-# 4:	    50 Hz refresh	    60 Hz refresh
-# 5:	      No parity		     Send parity
-# 6:	     2 stop bits	     1 stop bit
-# 7:	     8 data bits	     7 data bits
-# 8:		Not used		Not allowed on Rev E or lower
-# 9:	     Even parity	     Odd parity
-# 10:	    Steady cursor	    Blinking cursor
-# 	(On Rev E or lower, use W25 instead of switch 10.)
-#
-# S5 UART/Terminal options:
-# 		Open			Closed
-# 1:	P3-6 Not connected	DSR received on P3-6
-# 2:	P3-8 Not connected	DCD received on P3-8
-#
-# 3 Open, 4 Open:		P3-20 Not connected
-# 3 Open, 4 Closed:	DTR on when terminal is on
-# 3 Closed, 4 Open:	DTR is connected to RTS
-# 3 Closed, 4 Closed:	Not allowed
-#
-# 5 Closed:	HDX printer (hardware control) Rev. K with extension port off,
-# 		all data transmitted out of the modem port (P3) will also be
-# 		transmitted out of the printer port (P4).
-#
-# 6 Open, 7 Open:		Not allowed
-# 6 Open, 7 Closed:	20ma current loop input
-# 6 Closed, 7 Open:	RS232 input
-# 6 Closed, 7 Closed:	Not allowed
-#
-# Jumper options:
-# If the jumper is installed, the effect will occur (the next time the terminal
-# is switched on).
-#
-# S4/W31:	Enables automatic LF upon receipt of CR from
-# 		remote or keyboard.
-# S4/W32:	Enables transmission of EOT at the end of Send.  If not
-# 		installed, a carriage return is sent.
-# S4/W33:	Disables automatic carriage return in column 80.
-# S4/W34:	Selects Page Print Mode as initial condition.  If not
-# 		installed, Extension Mode is selected.
-#
-tvi920b|tvi920c|new televideo 920:\
-	:al=\EE:dl=\ER:k0=^AI\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:\
-	:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:\
-	:tc=tvi912:
-
-# Televideo 921 and variants
-# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
-# (tvi921: removed :ko=bt: before translation, I see no backtab cap;
-# also added empty <acsc> to suppress tic warning -- esr)
-tvi921|televideo model 921 with sysline same as page & real vi function:\
-	:am:bs:hs:pt:xn:xs:\
-	:co#80:li#24:sg#0:\
-	:ac=:ae=\E%%%:al=\EE:as=\E$:cd=\EY:ce=\ET:cl=^Z:\
-	:cm=3\E=%+ %+ :cr=^M:dc=\EW:dl=1*\ER:do=^V:ds=\Ef\r\Eg:ei=:\
-	:fs=\Eg:ho=^^:ic=\EQ:if=/usr/share/tabset/stdcrt:im=:\
-	:is=\El\E"\EF1\E.3\017\EA\E<:kA=\EE:kC=^Z:kD=\EW:kE=\ET:\
-	:kI=\EQ:kL=1*\ER:kS=\EY:kb=^H:kd=^V:kl=^H:kr=^L:ku=^K:le=^H:\
-	:mk@:nd=^L:nw=^M^J:sf=^J:ta=^I:ts=\Ef\EG0:up=^K:ve=\E.3:\
-	:vs=\E.2:tc=adm+sgr:
-# without the beeper
-# (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
-# also added empty <acsc> to suppress tic warning -- esr)
-tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper:\
-	:am:hs:xn:xs:\
-	:co#80:li#24:sg#0:\
-	:ac=:ae=\E%%%:al=\EE:as=\E$:cd=\EY:ce=\ET:cl=^Z:\
-	:cm=3\E=%+ %+ :cr=^M:dc=\EW:dl=1*\ER:do=^V:ds=\Ef\r\Eg:ei=:\
-	:fs=\Eg:ho=^^:ic=\EQ:if=/usr/share/tabset/stdcrt:im=:\
-	:is=\El\E"\EF1\E.3\017\EA\E<:kA=\EE:kC=^Z:kD=\EW:kE=\ET:\
-	:kI=\EQ:kL=1*\ER:kS=\EY:kb=^H:kd=^V:kl=^H:kr=^L:ku=^K:le=^H:\
-	:mk@:nd=^L:nw=^M^J:sf=^J:ta=^I:ts=\Ef\EG0:up=^K:vb=\Eb\Ed:\
-	:ve=\E.3:vs=\E.2:tc=adm+sgr:
-# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
-tvi92D|tvi92B with DTR instead of XON/XOFF & better padding:\
-	:al=2*\EE:dl=2*\ER:is=\El\E"\EF1\E.3\016\EA\E<:kA=2*\EE:\
-	:kL=2*\ER:tc=tvi92B:
-
-# (tvi924: This used to have :ds=\Es0:, :fs=\031:.  I put the new strings
-# in from a BSD termcap file because it looks like they do something the
-# old ones skip -- esr)
-tvi924|televideo tvi924:\
-	:am:bw:hs:in:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:sg#0:ws#80:\
-	:F1=^AK\r:F2=^AL\r:F3=^AM\r:F4=^AN\r:F5=^AO\r:al=\EE:bl=^G:\
-	:bt=\EI:cd=\Ey:ce=\Et:cl=\E*0:cm=\E=%+ %+ :cr=^M:\
-	:cs=\E_%+ %+ :ct=\E3:dc=\EW:dl=\ER:do=^V:ds=\Es0\Ef\031:\
-	:ei=:fs=\031\Es1:ho=^^:\
-	:i1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0:ic=\EQ:\
-	:if=/usr/share/tabset/stdcrt:im=:k0=^A@\r:k1=^AA\r:\
-	:k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:\
-	:k8=^AH\r:k9=^AI\r:k;=^AJ\r:kA=\EE:kC=\E*0:kD=\EW:kE=\Et:\
-	:kI=\EQ:kL=\ER:kS=\Ey:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:\
-	:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:l8=F9:l9=F10:\
-	:la=F11:le=^H:mb=\EG2:mk@:nd=^L:pk=\E|%+1%s\031:sf=^J:\
-	:sr=\Ej:st=\E1:ta=^I:ts=\Ef:up=^K:vb=\Eb\Ed:ve=\E.3:vi=\E.0:\
-	:vs=\E.1:tc=adm+sgr:
-
-# TVI925 DIP switches.  In each of these, D = Down and U = Up,
-#
-# Here are the settings for the external (baud) switches (S1):
-#
-#             Position		Baud
-# 7	8	9	10		[Printer]
-# 1	2	3	4		[Main RS232]
-# -----------------------------------------------------
-# D	D	D	D	9600
-# D	D	D	U	  50
-# D	D	U	D	  75
-# D	D	U	U	 110
-# D	U	D	D	 135
-# D	U	D	U	 150
-# D	U	U	D	 300
-# D	U	U	U	 600
-# U	D	D	D	1200
-# U	D	D	U	1800
-# U	D	U	D	2400
-# U	D	U	U	3600
-# U	U	D	D	4800
-# U	U	D	U	7200
-# U	U	U	D	9600
-# U	U	U	U	19200
-#
-#
-# Settings for word length and stop-bits (S1)
-#
-#  Position	Description
-# 5	6
-# ---------------------------
-# U	-	7-bit word
-# D	-	8-bit word
-# -	U	2 stop bits
-# -	D	1 stop bit
-#
-#
-# S2 (external) settings
-#
-# Position	Up	Dn	Description
-# --------------------------------------------
-# 1		X		Local edit
-# 			X	Duplex edit (transmit editing keys)
-# --------------------------------------------
-# 2		X		912/920 emulation
-# 			X	925
-# --------------------------------------------
-# 3			X
-# 4			X	No parity
-# 5			X
-# --------------------------------------------
-# 3			X
-# 4			X	Odd parity
-# 5		X
-# --------------------------------------------
-# 3			X
-# 4		X		Even parity
-# 5		X
-# --------------------------------------------
-# 3		X
-# 4			X	Mark parity
-# 5		X
-# --------------------------------------------
-# 3		X
-# 4		X		Space parity
-# 5		X
-# --------------------------------------------
-# 6		X		White on black display
-# 			X	Black on white display
-# --------------------------------------------
-# 7			X	Half Duplex
-# 8			X
-# --------------------------------------------
-# 7		X		Full Duplex
-# 8			X
-# --------------------------------------------
-# 7			X	Block mode
-# 8		X
-# --------------------------------------------
-# 9			X	50 Hz
-# 		X		60 Hz
-# --------------------------------------------
-# 10		X		CR/LF (Auto LF)
-# 			X	CR only
-#
-# S3 (internal switch) settings:
-#
-# Position	Up	Dn	Description
-# --------------------------------------------
-# 1		X		Keyclick off
-# 			X	Keyclick on
-# --------------------------------------------
-# 2			X	English
-# 3			X
-# --------------------------------------------
-# 2			X	German
-# 3		X
-# --------------------------------------------
-# 2		X		French
-# 3			X
-# --------------------------------------------
-# 2		X		Spanish
-# 3		X
-# --------------------------------------------
-# 4			X	Blinking block cursor
-# 5			X
-# --------------------------------------------
-# 4			X	Blinking underline cursor
-# 5		X
-# --------------------------------------------
-# 4		X		Steady block cursor
-# 5			X
-# --------------------------------------------
-# 4		X		Steady underline cursor
-# 5		X
-# --------------------------------------------
-# 6		X		Screen blanking timer (ON)
-# 			X	Screen blanking timer (OFF)
-# --------------------------------------------
-# 7		X		Page attributes
-# 			X	Line attributes
-# --------------------------------------------
-# 8		X		DCD disconnected
-# 			X	DCD connected
-# --------------------------------------------
-# 9		X		DSR disconnected
-# 			X	DSR connected
-# --------------------------------------------
-# 10		X		DTR Disconnected
-# 			X	DTR connected
-# --------------------------------------------
-#
-# (tvi925: BSD has :cl=\E*:.  I got :is: and :sr: from there -- esr)
-tvi925|televideo 925:\
-	:am:bs:bw:hs:ul:\
-	:co#80:li#24:sg#1:\
-	:al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:\
-	:ct=\E3:dc=\EW:dl=\ER:do=^V:ds=\Eh:ei=:fs=^M\Eg:ho=^^:ic=\EQ:\
-	:im=:is=\El\E":k0=^AI\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:\
-	:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:\
-	:kA=\EE:kC=^Z:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^V:\
-	:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:mk@:nd=^L:sf=^J:sr=\Ej:st=\E1:\
-	:ta=^I:ts=\Eh\Ef:up=^K:vb=\Eb\Ed:ve=\E.4:vs=\E.2:\
-	:tc=adm+sgr:
-# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
-# to avoid "magic cookie" standout glitch:
-tvi925-hi|TeleVideo Model 925 with half intensity standout mode:\
-	:sg@:\
-	:kb=^H:kd=^J:kl=^H:se=\E(:so=\E):tc=tvi925:
-
-# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
-# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
-# for additional capabilities,
-# The following tvi descriptions from B:pjphar and virus!mike
-# is for all 950s.  It sets the following attributes:
-# full duplex (\EDF)		write protect off (\E()
-# conversation mode (\EC)	graphics mode off (\E%)
-# white on black (\Ed)		auto page flip off (\Ew)
-# turn off status line (\Eg)	clear status line (\Ef\r)
-# normal video (\E0)		monitor mode off (\EX or \Eu)
-# edit mode (\Er)		load blank char to space (\Ee\040)
-# line edit mode (\EO)		enable buffer control (^O)
-# protect mode off (\E\047)	duplex edit keys (\El)
-# program unshifted send key to send line all (\E016)
-# program shifted send key to send line unprotected (\E004)
-# set the following to nulls:
-#	field delimiter (\Ex0\200\200)
-#	line delimiter (\Ex1\200\200)
-#	start-protected field delimiter (\Ex2\200\200)
-#	end-protected field delimiter (\Ex3\200\200)
-# set end of text delimiter to carriage return/null (\Ex4\r\200)
-#
-#                     TVI 950 Switch Setting Reference Charts
-#
-#                                     TABLE 1:
-#
-#      S1     1     2     3     4     5     6     7     8     9    10
-#          +-----------------------+-----+-----+-----------------------+
-#          | Computer Baud Rate    |Data |Stop | Printer Baud Rate     |
-#          |                       |Bits |Bits |                       |
-#   +------+-----------------------+-----+-----+-----------------------+
-#   |  Up  |        See            |  7  |  2  |        See            |
-#   +------+-----------------------+-----+-----+-----------------------+
-#   | Down |      TABLE 2          |  8  |  1  |      TABLE 2          |
-#   +------+-----------------------+-----+-----+-----------------------+
-#
-#
-#      S2     1     2     3     4     5     6     7     8     9    10
-#          +-----+-----+-----------------+-----+-----------+-----+-----+
-#          |Edit |Cursr|    Parity       |Video|Transmiss'n| Hz  |Click|
-#   +------+-----+-----+-----------------+-----+-----------+-----+-----+
-#   |  Up  | Dplx|Blink|      See        |GonBk|   See     | 60  | Off |
-#   +------+-----+-----+-----------------+-----+-----------+-----+-----+
-#   | Down |Local|St'dy|    TABLE 3      |BkonG|  CHART    | 50  | On  |
-#   +------+-----+-----+-----------------+-----+-----------+-----+-----+
-#
-#                                    TABLE 2:
-#
-#             +-----------+-----+-----+-----+-----+-----------+
-#             | Display   |  1  |  2  |  3  |  4  |   Baud    |
-#             +-----------+-----+-----+-----+-----+           |
-#             | Printer   |  7  |  8  |  9  | 10  |   Rate    |
-#             +-----------+-----+-----+-----+-----+-----------+
-#                         |  D  |  D  |  D  |  D  |   9600    |
-#                         |  U  |  D  |  D  |  D  |     50    |
-#                         |  D  |  U  |  D  |  D  |     75    |
-#                         |  U  |  U  |  D  |  D  |    110    |
-#                         |  D  |  D  |  U  |  D  |    135    |
-#                         |  U  |  D  |  U  |  D  |    150    |
-#                         |  D  |  U  |  U  |  D  |    300    |
-#                         |  U  |  U  |  U  |  D  |    600    |
-#                         |  D  |  D  |  D  |  U  |   1200    |
-#                         |  U  |  D  |  D  |  U  |   1800    |
-#                         |  D  |  U  |  D  |  U  |   2400    |
-#                         |  U  |  U  |  D  |  U  |   3600    |
-#                         |  D  |  D  |  U  |  U  |   4800    |
-#                         |  U  |  D  |  U  |  U  |   7200    |
-#                         |  D  |  U  |  U  |  U  |   9600    |
-#                         |  U  |  U  |  U  |  U  |  19200    |
-#                         +-----+-----+-----+-----+-----------+
-#
-#                                    TABLE 3:
-#                         +-----+-----+-----+-----------+
-#                         |  3  |  4  |  5  |   Parity  |
-#                         +-----+-----+-----+-----------+
-#                         |  X  |  X  |  D  |    None   |
-#                         |  D  |  D  |  U  |     Odd   |
-#                         |  D  |  U  |  U  |    Even   |
-#                         |  U  |  D  |  U  |    Mark   |
-#                         |  U  |  U  |  U  |   Space   |
-#                         +-----+-----+-----+-----------+
-#                                 X = don't care
-#
-#                                     CHART:
-#                         +-----+-----+-----------------+
-#                         |  7  |  8  | Communication   |
-#                         +-----+-----+-----------------+
-#                         |  D  |  D  |  Half Duplex    |
-#                         |  D  |  U  |  Full Duplex    |
-#                         |  U  |  D  |     Block       |
-#                         |  U  |  U  |     Local       |
-#                         +-----+-----+-----------------+
-#
-# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
-# I also inserted :ic: and :kI:; the :ko: string indicated that :IC:
-# should be present and all tvi native modes use the same string for this.
-# Finally, note that BSD has cud1=^V. -- esr)
-tvi950|televideo 950:\
-	:am:bs:hs:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:sg#1:\
-	:ac=b\011c\014d\re\ni\013:ae=^X:al=\EE:as=^U:bl=^G:bt=\EI:\
-	:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :cr=^M:ct=\E3:dc=\EW:\
-	:dl=\ER:do=^J:ds=\Eg\Ef\r:ei=\Er:fs=^M:ho=^^:ic=\EQ:im=\Eq:\
-	:is=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r:\
-	:k0=^A0\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\
-	:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:kB=\EI:kC=\E*:\
-	:kD=\EW:kE=\Et:kI=\EQ:kL=\ER:kS=\Ey:kb=^H:kd=^V:kh=^^:kl=^H:\
-	:kr=^L:ku=^K:le=^H:mk@:nd=^L:pf=\Ea:po=\E`:sf=^J:sr=\Ej:\
-	:st=\E1:ta=^I:ts=\Eg\Ef:up=^K:vb=\Eb\Ed:tc=adm+sgr:
-#
-# is for 950 with two pages adds the following:
-#	set 48 line page (\E\\2)
-#	place cursor at page 0, line 24, column 1 (\E-07 )
-#	set local (no send) edit keys (\Ek)
-#
-# two page 950 adds the following:
-#	when entering ex, set 24 line page (\E\\1)
-#	when exiting ex, reset 48 line page (\E\\2)
-#			 place cursor at 0,24,1 (\E-07 )
-#	set duplex (send) edit keys (\El) when entering vi
-#	set local (no send) edit keys (\Ek) when exiting vi
-#
-tvi950-2p|televideo950 w/2 pages:\
-	:is=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011:\
-	:ke=\Ek:ks=\El:te=\E\\2\E-07\s:ti=\E\\1\E-07\s:tc=tvi950:
-#
-# is for 950 with four pages adds the following:
-#	set 96 line page (\E\\3)
-#	place cursor at page 0, line 24, column 1 (\E-07 )
-#
-# four page 950 adds the following:
-#	when entering ex, set 24 line page (\E\\1)
-#	when exiting ex, reset 96 line page (\E\\3)
-#			 place cursor at 0,24,1 (\E-07 )
-#
-tvi950-4p|televideo950 w/4 pages:\
-	:is=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011:\
-	:ke=\Ek:ks=\El:te=\E\\3\E-07\s:ti=\E\\1\E-07\s:tc=tvi950:
-#
-# :is: for reverse video 950 changes the following:
-#	set reverse video (\Ed)
-#
-# set vb accordingly (\Ed ...delay... \Eb)
-#
-tvi950-rv|televideo950 rev video:\
-	:is=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0:\
-	:vb=\Ed\Eb:tc=tvi950:
-
-# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
-tvi950-rv-2p|televideo950 rev video w/2 pages:\
-	:is=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s:\
-	:ke=\Ek:ks=\El:te=\E\\2\E-07\s:ti=\E\\1\E-07\s:vb=\Ed\Eb:\
-	:tc=tvi950:
-
-# tvi950-rv uses the appropriate entries from 950-4p and 950-rv
-tvi950-rv-4p|televideo950 rev video w/4 pages:\
-	:is=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s:\
-	:ke=\Ek:ks=\El:te=\E\\3\E-07\s:ti=\E\\1\E-07\s:vb=\Ed\Eb:\
-	:tc=tvi950:
-# From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
-# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
-# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
-# the :rs: string, inserted the :IC: implied by the termcap :ko: string.  Note
-# the :ko: string had :cl: in it, which means that one of the original
-# :cl=\E*:, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
-# the 950 has.   Finally, corrected the <kel> string to match the 950 and what
-# ko implies -- esr)
-# If the BSD termcap file was right, :cm=\E=%p1%{32}%+%c%p2%{32}%+%c: would
-# also work.
-tvi955|televideo 955:\
-	:5i:bs:ms@:\
-	:it#8:sg@:\
-	:RA=\E[=7l:RX=^N:SA=\E[=7h:SX=^O:\
-	:ac=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ:ae=\E%%%:as=\E$:\
-	:cm=\E[%i%d;%dH:do=^V:is=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El:\
-	:kM=\EQ:kN=\EK:kP=\EJ:kT=\E1:ka=\E3:kt=\E2:mb=\EG2:\
-	:me=\EG0\E[=5l:mh=\E[=5h:mk=\EG1:ps=\EP:\
-	:r1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r:\
-	:sf@:ve=\E.2:vi=\E.0:vs=\E.1:tc=tvi950:
-tvi955-w|955-w|televideo955 w/132 cols:\
-	:co#132:\
-	:is=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El:tc=tvi955:
-# use half-intensity as normal mode, full intensity as :md:
-tvi955-hb|955-hb|televideo955 half-bright:\
-	:is=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El:md=\E[=5l:\
-	:me=\EG0\E[=5h:mh@:tc=tvi955:
-# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
-# (tvi970: removed ":sg#0:"; removed :se:=\E[m, :ue:=\E[m;
-# added :am:/:cs:/:ho:/<hpa>/<vpa>/:ti:/:te: from BRL.
-# According to BRL we could have :ke:=\E>, :ks:=\E= but I'm not sure what
-# it does to the function keys.  I deduced <rmam>/<smam>.
-# also added empty <acsc> to suppress tic warning,  -- esr)
-tvi970|televideo 970:\
-	:am:bs:da:db:mi:ms:pt:\
-	:co#80:it#8:li#24:\
-	:RA=\E[?7h:SA=\E[?7l:ac=:ae=\E(B:al=\E[L:as=\E(B:bt=\E[Z:\
-	:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[2J:cm=\E[%i%d;%df:\
-	:cs=\E[%i%d;%dr:cv=\E[%i%dd:dc=\E[P:dl=\E[M:do=\ED:\
-	:ds=\Eg\Ef\r:ei=\E[4l:ho=\E[H:im=\E[4h:\
-	:is=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J:k1=\E?a:\
-	:k2=\E?b:k3=\E?c:k4=\E?d:k5=\E?e:k6=\E?f:k7=\E?g:k8=\E?h:\
-	:k9=\E?i:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
-	:le=^H:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:sr=\EM:ta=^I:te=:\
-	:ti=\E[?20l\E[?7h\E[1Q:ue=\E[m:up=\EM:us=\E[4m:\
-	:vb=\E[5m\E[m:vs=\E[1Q:
-tvi970-vb|televideo 970 with visual bell:\
-	:vb=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l:tc=tvi970:
-tvi970-2p|televideo 970 with using 2 pages of memory:\
-	:te=\E[H\E[J\E[V:ti=\E[U\E[?20l\E[?7h\E[1Q:tc=tvi970:
-# Works with vi and rogue.  NOTE: Esc v sets autowrap on, Esc u sets 80 chars
-# per line (rather than 40), Esc K chooses the normal character set.  Not sure
-# padding is needed, but adapted from the tvi920c termcap.  The :so: and
-# :us: strings are klutzy, but at least use no screen space.
-# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:".  I wish we knew <rmam>,
-# its absence means <smam>=\Ev isn't safe to use. -- esr)
-# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
-# The :cd:/:k0:/:k1:/:kh:/<mc4>, and <mc5> caps are from BRL, which says:
-# F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
-tvipt|televideo personal terminal:\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\EE:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :dl=\ER:\
-	:ho=^^:if=/usr/share/tabset/stdcrt:is=\Ev\Eu\EK:k0=^A:\
-	:k1=^B:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:pf=^T:\
-	:po=^R:se=\EF:so=\EG1@A\EH:ue=\EF:up=^K:us=\EG1B@\EH:
-# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-tvi9065|televideo 9065:\
-	:am:bw:hs:mi:ms:xn:xo:\
-	:co#80:it#8:li#25:lm#0:ma#4:vt#0:ws#30:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
-	:ae=\E%%%:al=\EE:as=\E$:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:\
-	:cm=\E=%+ %+ :cr=^M:cs=\E[%i%d;%dr:ct=\E3:dc=\EW:dl=\ER:\
-	:dm=\Er:do=^V:ds=\E_30\r:ec=\E[%d@:ed=\0:ei=\Er:fs=^M:ho=^^:\
-	:i1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er:\
-	:i2=\E<\E[=4l\E[=8h:if=/usr/share/tabset/stdcrt:im=\Eq:\
-	:ip=:is=\EF2\EG0\E\\L:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
-	:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kb=^H:\
-	:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:ll=\E[25;1H:mb=\EG2:\
-	:md=\EG,:me=\EG0:mh=\EGp:mr=\EG4:nd=^L:nw=^M^J:\
-	:rp=\E[%r%db%.:se=\EG0:sf=^J:so=\EGt:sr=\Ej:st=\E1:ta=^I:\
-	:te=\E.3\Er\E[1;25r\E[25;0H:ti=\E.2:ts=\E[4;1v\E_30:\
-	:uc=\EG8\EG0:ue=\EG0:up=^K:us=\EG8:vb=\Eb\Ed:ve=\E.3:\
-	:vi=\E.0:vs=\E.2:
-
-#### Visual (vi)
-#
-# In September 1993, Visual Technology of Westboro, Massachusetts,
-# merged with White Pine Software of Nashua, New Hampshire.
-#
-# White Pine Software may be contacted at +1 603/886-9050.
-# Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
-#
-
-# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
-# Recently I hacked together the following termcap for Visual
-# Technology's Visual 50 terminal. It's a slight modification of
-# the vt52 termcap.
-# It's intended to run when the Visual 50 is in vt52 emulation mode
-# (I know what you're thinking; if it's emulating a vt52, then why
-# another termcap? Well, it turns out that the Visual 50 can handle
-# :dl: and db(?) among other things, which the vt52 can't)
-# The termcap works OK for the most part. The only problem is on
-# character inserts. The whole line gets painfully redrawn for each
-# character typed. Any suggestions?
-# Beau's entry is combined with the vi50 entry from University of Wisconsin.
-# Note especially the :al: function.  :k4:-:k6: are really l4-l6 in
-# disguise; :k7:-:k9: are really l1-l3.
-vi50|visual 50:\
-	:am:bs:da:db:ms:pt:\
-	:co#80:it#8:li#24:\
-	:al=\EL:bl=^G:bt=4\Ez:cd=\EJ:ce=16\EK:cl=\EH\EJ:\
-	:cm=\EY%+ %+ :cr=^M:dl=3*\EM:do=\EB:ho=\EH:k1=\EP:k2=\EQ:\
-	:k3=\ER:k4=\EV:k5=\EE:k6=\E]:k7=\EL:k8=\Ev:k9=\EM:kb=^H:\
-	:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:nl=^J:\
-	:nw=^M^J:se=\ET:sf=^J:so=\EU:sr=\EI:ta=^I:ue=\EW:up=\EA:\
-	:us=\ES:
-# this one was BSD & SCO's vi50
-vi50adm|visual 50 in adm3a mode:\
-	:am:ms:\
-	:co#80:it#8:li#24:\
-	:al=\EL:bl=^G:cd=\Ek:ce=\EK:cl=^Z:cm=\E=%+ %+ :cr=^M:dl=\EM:\
-	:do=^J:ho=\EH:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:\
-	:nd=^L:se=\ET:sf=^J:so=\EU:ta=^I:up=^K:
-# From: Jeff Siegal <jbs@quiotix.com>
-vi55|Visual 55:\
-	:am:bs:mi:ms:\
-	:co#80:it#8:li#24:\
-	:al=\EL:cd=\EJ:ce=\EK:cl=\Ev:cm=\EY%+ %+ :cs=\E_%+A%+A:\
-	:dc=\Ew:dl=\EM:do=^J:ei=\Eb:ho=\EH:im=\Ea:\
-	:is=\Ev\E_AX\Eb\EW\E9P\ET:kb=^H:kd=\EB:kl=\ED:kr=\EC:\
-	:ku=\EA:le=^H:nd=\EC:se=\ET:so=\EU:sr=\EI:ta=^I:up=\EA:
-
-# Visual 200 from BRL
-# The following switch settings are assumed for normal operation:
-#	FULL_DUPLEX		SCROLL			CR
-#	AUTO_NEW_LINE_ON	VISUAL_200_EMULATION_MODE
-# Other switches may be set for operator convenience or communication
-# requirements.
-# Character insertion is kludged in order to get around the "beep" misfeature.
-# (This cap is commented out because :im:/:ei: is more efficient -- esr)
-# Supposedly "4*" delays should be used for :al:, :cd:, :cl:, :dc:,
-# and :dl: strings, but we seem to get along fine without them.
-vi200|visual 200:\
-	:am:bs:mi:ms:pt:\
-	:co#80:it#8:kn#10:li#24:\
-	:ac=:ae=\EG:al=\EL:as=\EF:bl=^G:bt=\Ez:cd=\Ey:ce=\Ex:cl=\Ev:\
-	:cm=\EY%+ %+ :cr=^M:ct=\Eg:dc=\EO:dl=\EM:do=^J:ho=\EH:\
-	:k0=\E?p:k1=\E?q:k2=\E?r:k3=\E?s:k4=\E?t:k5=\E?u:k6=\E?v:\
-	:k7=\E?w:k8=\E?x:k9=\E?y:kA=\EL:kC=\Ev:kD=\EO:kE=\Et:kI=\Ei:\
-	:kL=\EM:kM=\Ej:kS=\EJ:kT=\E1:kb=^H:kd=\EB:ke=\E>:kh=\EH:\
-	:kl=\ED:kr=\EC:ks=\E=:kt=\E2:ku=\EA:le=^H:me=\E3\Eb:mh=\E4:\
-	:mk=\Ea:nd=\EC:pf=\EX:po=\EW:ps=\EH\E]:\
-	:r1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX:se=\E3:sf=^J:so=\E4:\
-	:sr=\EI:st=\E1:ta=^I:up=\EA:ve=\Ec:vs=\Ed:
-# The older Visuals didn't come with function keys. This entry uses
-# :ks: and :ke: so that the keypad keys can be used as function keys.
-# If your version of vi doesn't support function keys you may want
-# to use vi200-f.
-vi200-f|visual 200 no function keys:\
-	:is=\E3\Eb\Ej\E\\\El\EG\Ed\Ek:k0=\E?p:k1=\E?q:k2=\E?r:\
-	:k3=\E?s:k4=\E?t:k5=\E?u:k6=\E?v:k7=\E?w:k8=\E?x:k9=\E?y:\
-	:ke=\E>:ks=\E=:se@:so@:tc=vi200:
-vi200-rv|visual 200 reverse video:\
-	:se=\E3:so=\E4:sr@:ve@:vs@:tc=vi200:
-
-# the function keys are programmable but we don't reprogram them to their
-# default values with :is: because programming them is very verbose. maybe
-# an initialization file should be made for the 300 and they could be stuck
-# in it.
-# (vi300: added <rmam>/<smam> based on init string -- esr)
-vi300|visual 300 ansi x3.64:\
-	:am:bw:mi:xn:\
-	:co#80:li#24:\
-	:RA=\E[?7l:SA=\E[?7h:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
-	:do=\E[B:ei=\E[4l:ho=\E[H:im=\E[4h:\
-	:is=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s:\
-	:k1=\E_A\E\\:k2=\E_B\E\\:k3=\E_C\E\\:k4=\E_D\E\\:\
-	:k5=\E_E\E\\:k6=\E_F\E\\:k7=\E_G\E\\:k8=\E_H\E\\:\
-	:k9=\E_I\E\\:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
-	:me=\E[m:nd=\E[C:se=\E[m:sf=^J:so=\E[1m:sr=\EM:ta=^I:\
-	:ue=\E[m:up=\E[A:us=\E[4m:
-# some of the vi300s have older firmware that has the command
-# sequence for setting editing extent reversed.
-vi300-old|visual 300 with old firmware (set edit extent reversed):\
-	:is=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s:\
-	:tc=vi300:
-
-# Visual 500 prototype entry from University of Wisconsin.
-# The best place to look for the escape sequences is page A1-1 of the
-# Visual 500 manual.  The initialization sequence given here may be
-# overkill, but it does leave out some of the initializations which can
-# be done with the menus in set-up mode.
-# The :xp: line below is so that emacs can understand the padding requirements
-# of this slow terminal.  :xp: is 10 time the padding factor.
-# (vi500: removed unknown :xp#4: termcap;
-# also added empty <acsc> to suppress tic warning -- esr)
-vi500|visual 500:\
-	:am:mi:ms:\
-	:co#80:it#8:li#33:\
-	:ac=:ae=^O:al=3*\EL\Ex:as=^N:bt=4\Ez:cd=3*\Ey:ce=16\Ex:\
-	:cl=6*\Ev:cm=\EY%+ %+ :cr=^M:cs=\E(%+ %+ :dc=3*\EO:\
-	:dl=3*\EM:do=\EB:ei=\Ej:ho=\EH:im=\Ei:\
-	:is=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\:\
-	:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:\
-	:nw=^M^J:se=\E^G:sf=^J:so=\E^H:ta=8\011:ue=\E^C:up=\EA:\
-	:us=\E^D:
-
-# The visual 550 is a visual 300 with tektronix graphics,
-# and with 33 lines. clear screen is modified here to
-# also clear the graphics.
-vi550|visual 550 ansi x3.64:\
-	:li#33:\
-	:cl=\030\E[H\E[2J:tc=vi300:
-
-vi603|visual603|visual 603:\
-	:hs:mi:\
-	:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
-	:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:ds=\EP2;1~\E\\:ei=\E[4l:\
-	:fs=\E\\:i1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r:\
-	:im=\E[4h:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
-	:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:ts=\EP2~:ue=\E[24m:\
-	:up=\E[A:us=\E[4m:tc=vt100:
-
-#### Wyse (wy)
-#
-#	Wyse Technology
-#	3471 North First Street
-#	San Jose, CA 95134
-#	Vox: (408)-473-1200
-#	Fax: (408) 473-1222
-#	Web: http://www.wyse.com
-#
-# Wyse sales can be reached by phone at 1-800-GET-WYSE.  Tech support is at
-# (800)-800-WYSE (option 5 gets you a human).  There's a Web page at the
-# obvious address, <http://www.wyse.com>.  They keep terminfo entries at
-# <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
-#
-# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
-# They now own the Qume and Amdek brands, too.  So these are the people to
-# talk with about all Link, Qume, and Amdek terminals.
-#
-# These entries include a few small fixes.
-# I canceled the bel capacities in the vb entries.
-# I made two trivial syntax fixes in the wyse30 entry.
-# I made some entries relative to adm+sgr.
-#
-#
-# Note: The wyse75, wyse85, and wyse99 have been discontinued.
-
-#	   Although the Wyse 30 can support more than one attribute
-#	it requires magic cookies to do so.  Many applications do not
-#	function well with magic cookies.  The following terminfo uses
-#	the protect mode to support one attribute (dim) without cookies.
-#	If more than one attribute is needed then the wy30-mc terminfo
-#	should be used.
-#
-wy30|wyse30|Wyse 30:\
-	:5i:am:bw:hs:mi:ms:xo:\
-	:Nl#8:co#80:lh#1:li#24:lw#8:ma#1:ws#45:\
-	:#2=\E{:&3=\Er:@8=\E7:LF=\EA11:LO=\EA10:\
-	:ac=0wa_h[jukslrmqnxqzttuyv]wpxv:ae=\EH^C:al=\EE:\
-	:as=\EH^B:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :\
-	:cr=^M:ct=\E0:dc=\EW:dl=\ER:do=^J:ds=\EF\r:ei=\Er:fs=^M:\
-	:ho=^^:im=\Eq:ip=:is=\E'\E(\E^3\E`9\016\024:k1=^A@\r:\
-	:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:\
-	:k8=^AG\r:kA=\EE:kB=\EI:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:\
-	:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\
-	:ll=^^^K:me=\E(\EH\003:mh=\E`7\E):mp=\E`7\E):nd=^L:\
-	:nw=^M^J:pf=^T:pn=\Ez%+/%s\r:po=^X:ps=\EP:px=\Ez%+?%s\177:\
-	:..sa=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;:\
-	:se=\E(:sf=\n:so=\E`7\E):sr=\Ej:st=\E1:ta=\011:ts=\EF:up=^K:\
-	:vb=\E`8\E`9:ve=\E`1:vi=\E`0:
-#
-#	This terminal description uses the non-hidden attribute mode
-#	(with magic cookie).
-#
-# (wy30-mc: added :ti: to suppress tic warning --esr)
-wy30-mc|wyse30-mc|wyse 30 with magic cookies:\
-	:ms@:\
-	:ma@:sg#1:\
-	:ae=\EG0\EH\003:as=\EG0\EH\002:mb=\EG2:\
-	:me=\EG0\E(\EH\003:mh=\EGp:mp=\EG0\E):\
-	:..sa=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;:\
-	:se=\EG0:so=\EG4:te=\EG0:ti=:tc=wy30:tc=adm+sgr:
-#	The mandatory pause used by :vb: does not work with
-#	older versions of terminfo.  If you see this effect then
-#	unset xon and delete the / from the delay.
-#	i.e. change $<100/> to $<100>
-wy30-vb|wyse30-vb|wyse 30 visible bell:\
-	:bl@:tc=wy30:
-#
-#	   The Wyse 50 can support one attribute (e.g. Dim, Inverse,
-#	Normal) without magic cookies by using the protect mode.
-#	The following description uses this feature, but when more
-#	than one attribute is put on the screen at once, all attributes
-#	will be changed to be the same as the last attribute given.
-#	   The Wyse 50 can support more attributes when used with magic
-#	cookies.  The wy50-mc terminal description uses magic cookies
-#	to correctly handle multiple attributes on a screen.
-#
-wy50|wyse50|Wyse 50:\
-	:5i:am:bw:hs:mi:ms:xo:\
-	:Nl#8:co#80:lh#1:li#24:lw#8:ma#1:ws#45:\
-	:#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:F3=^AL\r:\
-	:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:\
-	:ac=0wa_h[jukslrmqnxqzttuyv]wpxv:ae=\EH^C:al=\EE:\
-	:as=\EH^B:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :\
-	:cr=^M:ct=\E0:dc=\EW:dl=\ER:do=^J:ds=\EF\r:ei=\Er:fs=^M:\
-	:ho=^^:i1=\E`\:\E`9:im=\Eq:ip=:is=\016\024\E'\E(:k1=^A@\r:\
-	:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:\
-	:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:kE=\ET:\
-	:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:\
-	:kr=^L:ku=^K:le=^H:ll=^^^K:me=\E(\EH\003:mh=\E`7\E):\
-	:mp=\E`7\E):mr=\E`6\E):nd=^L:nw=^M^J:pf=^T:pn=\Ez%+/%s\r:\
-	:po=^X:ps=\EP:px=\Ez%+?%s\177:\
-	:..sa=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;:\
-	:se=\E(:sf=\n:so=\E`6\E):sr=\Ej:st=\E1:ta=^I:ts=\EF:up=^K:\
-	:vb=\E`8\E`9:ve=\E`1:vi=\E`0:
-#
-#	This terminal description uses the non-hidden attribute mode
-#	(with magic cookie).
-#
-#	The mandatory pause used by flash does not work with some
-#	older versions of terminfo.  If you see this effect then
-#	unset :xo: and delete the / from the delay.
-#	i.e. change $<100/> to $<100>
-# (wy50-mc: added :ti: to suppress tic warning --esr)
-wy50-mc|wyse50-mc|wyse 50 with magic cookies:\
-	:ms@:\
-	:ma@:sg#1:\
-	:ae=\EG0\EH\003:as=\EG0\EH\002:mb=\EG2:\
-	:me=\EG0\E(\EH\003:mh=\EGp:mp=\EG0\E):mr=\EG4:\
-	:..sa=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;:\
-	:se=\EG0:so=\EGt:te=\EG0:ti=:tc=wy50:tc=adm+sgr:
-wy50-vb|wyse50-vb|wyse 50 visible bell:\
-	:bl@:tc=wy50:
-wy50-w|wyse50-w|wyse 50 132-column:\
-	:Nl#16:co#132:lw#7:ws#97:\
-	:cm=\Ea%i%dR%dC:dc=\EW:i1=\E`;\E`9:tc=wy50:
-wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell:\
-	:bl@:tc=wy50-w:
-
-#
-#	The Wyse 350 is a Wyse 50 with color.
-#	Unfortunately this means that it has magic cookies.
-#	The color attributes are designed to overlap the reverse, dim and
-#	underline attributes.  This is nice for monochrome applications
-#	because you can make underline stuff green (or any other color)
-#	but for true color applications it's not so hot because you cannot
-#	mix color with reverse, dim or underline.
-#	    To further complicate things one of the attributes must be
-#	black (either the foreground or the background).  In reverse video
-#	the background changes color with black letters.  In normal video
-#	the foreground changes colors on a black background.
-#	    This terminfo uses some of the more advanced features of curses
-#	to display both color and blink.  In the final analysis I am not
-#	sure that the wy350 runs better with this terminfo than it does
-#	with the wy50 terminfo (with user adjusted colors).
-#
-#	The mandatory pause used by flash does not work with
-#	older versions of terminfo.  If you see this effect then
-#	unset xon and delete the / from the delay.
-#	i.e. change $<100/> to $<100>
-#
-# Bug: The <op> capability resets attributes.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-wy350|wyse350|Wyse 350:\
-	:5i:am:bw:hs:mi:xo:\
-	:Co#8:NC#55:Nl#8:co#80:lh#1:li#24:lw#8:pa#8:sg#1:ws#45:\
-	:#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:F3=^AL\r:\
-	:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:Sb=:\
-	:ac=0wa_h[jukslrmqnxqzttuyv]wpxv:ae=\EG0\EH\003:al=\EE:\
-	:as=\EG0\EH\002:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E+:\
-	:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=\EW:dl=\ER:do=^J:ds=\EF\r:\
-	:ei=\Er:fs=^M:ho=^^:i1=\E`\:\E`9:i2=\E%?:im=\Eq:ip=:\
-	:is=\016\024\E'\E(:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
-	:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:\
-	:kA=\EE:kB=\EI:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:\
-	:kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:\
-	:mb=\EG2:me=\EG0\E(\EH\003%{0}%PA%{0}%PC:mh=\EGp:\
-	:mp=\EG0\E):nd=^L:nw=^M^J:oc=\E%?:op=\EG0:pf=^T:\
-	:pn=\Ez%+/%s\r:po=^X:ps=\EP:px=\Ez%+?%s\177:sf=\n:sr=\Ej:\
-	:st=\E1:ta=^I:ts=\EF:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:\
-	:tc=adm+sgr:
-wy350-vb|wyse350-vb|wyse 350 visible bell:\
-	:bl@:tc=wy350:
-wy350-w|wyse350-w|wyse 350 132-column:\
-	:Nl#16:co#132:lw#7:ws#97:\
-	:cm=\Ea%i%dR%dC:dc=\EW:i1=\E`;\E`9:tc=wy350:
-wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell:\
-	:bl@:tc=wy350-w:
-#
-#	This terminfo description is untested.
-#	The wyse100 emulates an adm31, so the adm31 entry should work.
-#
-wy100|wyse 100:\
-	:hs:mi:\
-	:co#80:li#24:sg#1:\
-	:al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :cr=^M:\
-	:dc=\EW:dl=\ER:do=^J:ds=\EA31:ei=\Er:fs=^M:im=\Eq:is=\Eu\E0:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:kb=^H:kd=^J:kh=\E{:kl=^H:kr=^L:ku=^K:\
-	:le=^H:mk@:nd=^L:sf=^J:ts=\EF:up=^K:tc=adm+sgr:
-#
-#	The Wyse 120/150 has most of the features of the Wyse 60.
-#	This terminal does not need padding up to 9600 baud!
-#	:ms: should be set but the clear screen fails when in
-#	alt-charset mode.  Try \EcE\s\s\E+\s if the screen is really clear
-#	then set :ms:.
-#
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-wy120|wyse120|wy150|wyse150|Wyse 120/150:\
-	:5i:am:bw:hs:km:mi:ms:xo:\
-	:Nl#8:co#80:it#8:lh#1:li#24:lw#8:pb#9601:ws#45:\
-	:#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:F3=^AL\r:\
-	:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:RA=\Ed.:\
-	:RX=\Ec20:SA=\Ed/:SX=\Ec21:ae=\EcD:al=\EE:as=\EcE:bl=^G:\
-	:bt=\EI:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:\
-	:dc=\EW:dl=\ER:do=^J:ds=\EF\r:ei=\Er:fs=^M:ho=^^:\
-	:i1=\EcB0\EcC1:i2=\EwJ\Ew1:im=\Eq:ip=:\
-	:is=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:\
-	:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:\
-	:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:mb=\EG2:\
-	:me=\E(\EH\003\EG0\EcD:mh=\EGp:mp=\E):nd=^L:nw=\r\n:pf=^T:\
-	:pl=\EZ2%+?%s\177:pn=\Ez%+/%s\r:po=\Ed#:ps=\EP:\
-	:px=\EZ1%+?%s\177:r1=\E~!\E~4:r2=\EeF\E`\::r3=\EwG\Ee(:\
-	:sf=\n:so=\EGt:sr=\Ej:st=\E1:ta=\011:te=\Ew1:ti=\Ew0:ts=\EF:\
-	:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:tc=adm+sgr:
-#
-wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column:\
-	:Nl#16:co#132:lw#7:ws#97:\
-	:cm=\Ea%i%dR%dC:dc=\EW:ip=:rs=\E`;:tc=wy120:
-#
-wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines:\
-	:Nl@:lh@:li#25:lw@:\
-	:pn@:r3=\EwG\Ee):tc=wy120:
-#
-wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines:\
-	:Nl@:lh@:li#25:lw@:\
-	:pn@:r3=\EwG\Ee):tc=wy120-w:
-#
-wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell:\
-	:bl@:tc=wy120:
-#
-wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell:\
-	:bl@:tc=wy120-w:
-#
-#	The Wyse 60 is like the Wyse 50 but with more padding.
-#	The reset strings are slow and the pad times very depending
-#	on other parameters such as font loading.  I have tried
-#	to follow the following outline:
-#
-#		<rs1> -> set personality
-#		<rs2> -> set number of columns
-#		<rs3> -> set number of lines
-#		:i1: -> select the proper font
-#		:is: -> do the initialization
-#		:i3: -> set up display memory (2 pages)
-#
-#	The Wyse 60's that have vt100 emulation are slower than the
-#	older Wyse 60's.  This change happened mid-1987.
-#	The capabilities effected are :dc: :dl: :al: :sf: :sr:
-#
-#	The meta key is only half right.  This terminal will return the
-#	high order bit set when you hit CTRL-function_key
-#
-#	It may be useful to assign two function keys with the
-#	values  \E=(\s  look at old data in page 1
-#	        \E=W,   look at bottom of page 1
-#	where \s is a space ( ).
-#
-#	Note:
-#	   The Wyse 60 runs faster when the XON/XOFF
-#	   handshake is turned off.
-#
-# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
-# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-wy60|wyse60|Wyse 60:\
-	:5i:am:bw:hs:km:mi:ms:\
-	:Nl#8:co#80:lh#1:li#24:lw#8:ws#45:\
-	:#2=\E{:%9=\EP:&3=\Er:@8=\E7:DK=\E`b:F1=^AJ\r:F2=^AK\r:\
-	:F3=^AL\r:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:\
-	:RA=\Ed.:RC=\E`c:RX=\Ec20:SA=\Ed/:SX=\Ec21:ae=\EcD:al=\EE:\
-	:as=\EcE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :\
-	:cr=^M:ct=\E0:dc=\EW:dl=\ER:do=^J:ds=\EF\r:ei=\Er:fs=^M:\
-	:ho=\E{:i1=\EcB0\EcC1:i2=\EwJ\Ew1:im=\Eq:ip=:\
-	:is=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:\
-	:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:\
-	:kl=^H:kr=^L:ku=^K:le=^H:ll=\E{^K:mb=\EG2:\
-	:me=\E(\EH\003\EG0\EcD:mh=\EGp:mp=\E):nd=^L:nw=\r\n:pf=^T:\
-	:pl=\EZ2%+?%s\177:pn=\Ez%+/%s\r:po=\Ed#:ps=\EP:\
-	:px=\EZ1%+?%s\177:r1=\E~!\E~4:r2=\EeG:r3=\EwG\Ee(:sf=\n:\
-	:so=\EGt:sr=\Ej:st=\E1:ta=\011:te=\Ew1:ti=\Ew0:ts=\EF:up=^K:\
-	:vb=\E`8\E`9:ve=\E`1:vi=\E`0:tc=adm+sgr:
-#
-wy60-w|wyse60-w|wyse 60 132-column:\
-	:Nl#16:co#132:lw#7:ws#97:\
-	:cm=\Ea%i%dR%dC:dc=\EW:ip=:rs=\EeF\E`;:tc=wy60:
-#
-wy60-25|wyse60-25|wyse 60 80-column 25-lines:\
-	:Nl@:lh@:li#25:lw@:\
-	:pn@:r3=\EwG\Ee):tc=wy60:
-wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines:\
-	:Nl@:lh@:li#25:lw@:\
-	:pn@:r3=\EwG\Ee):tc=wy60-w:
-#
-wy60-42|wyse60-42|wyse 60 80-column 42-lines:\
-	:li#42:\
-	:al=\EE:cd=\Ey:cl=\E+:cm=\E=%+ %+ :dc=\EW:dl=\ER:\
-	:i1=\EcB2\EcC3:ip=:nw=\r\n:r3=\Ee*:sf=\n:sr=\Ej:tc=wy60:
-wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines:\
-	:Nl#16:co#132:lw#7:ws#97:\
-	:cd=\Ey:cl=\E+:cm=\Ea%i%dR%dC:dc=\EW:ho=\036:ip=:nw=\r\n:\
-	:rs=\EeF\E`;:tc=wy60-42:
-#
-wy60-43|wyse60-43|wyse 60 80-column 43-lines:\
-	:Nl@:lh@:li#43:lw@:\
-	:pn@:r3=\Ee+:tc=wy60-42:
-wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines:\
-	:Nl@:lh@:li#43:lw@:\
-	:pn@:r3=\Ee+:tc=wy60-42-w:
-#
-wy60-vb|wyse60-vb|Wyse 60 visible bell:\
-	:bl@:tc=wy60:
-wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell:\
-	:bl@:tc=wy60-w:
-
-#	The Wyse-99GT looks at lot like the Wyse 60 except that it
-#	does not have the 42/43 line mode.  In the Wyse-60 the "lines"
-#	setup parameter controls the number of lines on the screen.
-#	For the Wyse 99GT the "lines" setup parameter controls the
-#	number of lines in a page.  The screen can display 25 lines max.
-#	    The Wyse-99GT also has personalities for the VT220 and
-#	Tektronix 4014.  But this has no bearing on the native mode.
-#
-#	(msgr) should be set but the clear screen fails when in
-#	alt-charset mode.  Try \EcE\s\s\E+\s if the screen is really clear
-#	then set msgr, else use msgr@.
-#
-#	u0 -> enter Tektronix mode
-#	u1 -> exit Tektronix mode
-#
-wy99gt|wyse99gt|Wyse 99gt:\
-	:ms@:\
-	:al=\EE:cd=\Ey:ce=\Et:cl=\E+:dc=\EW:dl=\ER:i2=\Ew0:ip=:nw@:\
-	:rs=\E`\::sf=\n:sr=\Ej:ta=\011:te=\Ew0:ti=\Ew1:u0=\E~>\E8:\
-	:u1=\E[42h:vb=\E`8\E`9:tc=wy60:
-#
-wy99gt-w|wyse99gt-w|wyse 99gt 132-column:\
-	:Nl#16:co#132:lw#7:ws#97:\
-	:cd=\Ey:cl=\E+:cm=\Ea%i%dR%dC:dc=\EW:ip=:rs=\E`;:tc=wy99gt:
-#
-wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines:\
-	:Nl@:lh@:li#25:lw@:\
-	:pn@:r2=\E`\::r3=\EwG\Ee):tc=wy99gt:
-#
-wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines:\
-	:Nl@:lh@:li#25:lw@:\
-	:pn@:rs=\E`;:tc=wy99gt-w:
-#
-wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell:\
-	:bl@:tc=wy99gt:
-#
-wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell:\
-	:bl@:tc=wy99gt-w:
-
-# Can't set tabs! Other bugs (ANSI mode only):
-# - can't redefine function keys (anyway, key redefinition in ANSI mode
-#   is too much complex to be described);
-# - meta key can't be described (the terminal forgets it when reset);
-# The xon-xoff handshaking can't be disabled while in ansi personality, so
-# emacs can't work at speed greater than 9600 baud.  No padding is needed at
-# this speed.
-#   dch1 has been commented out because it causes annoying glittering when
-# vi deletes one character at the beginning of a line with tabs in it.
-#   dch makes sysgen(1M) have a horrible behavior when deleting
-# a screen and makes screen(1) behave badly, so it is disabled too. The nice
-# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
-# not, so smir and rmir are commented out as well.
-# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard):\
-	:am:km:mi:ms:xn:\
-	:co#80:it#8:li#25:vt#3:\
-	:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:\
-	:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:dl=\E[M:do=\ED:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
-	:im=\E[4h:\
-	:is=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[M:k6=\E[17~:\
-	:k7=\E[18~:k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l:\
-	:kl=\EOD:kr=\EOC:ks=\E[?1h:ku=\EOA:le=\010:ll=\E[24E:\
-	:mb=\E[5m:md=\E[1m:me=\E[m\017\E["q:mh=\E[2m:mr=\E[7m:\
-	:nd=\E[C:nw=\EE:rc=\E8:\
-	:rs=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i:\
-	:sc=\E7:se=\E[27m:sf=\n:so=\E[7m:sr=\EM:ta=^I:ue=\E[24m:\
-	:up=\EM:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[34h\E[?25h:\
-	:vi=\E[?25l:vs=\E[34l\E[?25h:
-
-#   This is the american terminal. Here tabs work fine.
-# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
-wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard):\
-	:ct=\E[3g:i2=\E[?5l:r3=\E[?5l:st=\EH:tc=wy99-ansi:
-
-# This terminal (firmware version 02) has a lot of bugs:
-# - can't set tabs;
-# - other bugs in ANSI modes (see above).
-# This description disables handshaking when using cup. This is because
-# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
-# cannot be used at speeds greater than 9600 baud, because at greater
-# speeds handshaking is needed even for character sending. If you use
-# DTR handshaking, you can use even greater speeds.
-# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard):\
-	:am:bw:hs:km:mi:ms:xo:\
-	:co#80:it#8:li#25:ws#46:\
-	:K1=^^:K3=\EJ:K4=\ET:K5=\EK:ae=\EcD:al=\EE:as=\EcE:bl=^G:\
-	:bt=\EI:cd=\EY:ce=\ET:cl=\E'\E(\032:cm=\E=%+ %+ :cr=^M:\
-	:dc=\EW:dl=\ER:do=\Ej:ds=\EF\r:ei=\Er:fs=^M:ho=^^:im=\Eq:\
-	:is=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kd=^J:kl=^H:kr=^L:ku=^K:\
-	:le=^H:mb=\EG2:me=\E(\EG0:mh=\EGp:mr=\EG4:nd=^L:nw=^_:\
-	:rs=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024:\
-	:se=\EG0:sf=^J:so=\EG4:sr=\Ej:ta=^I:te=\Ec21\Ec31:\
-	:ti=\Ec20\Ec30:ts=\EF:up=^K:vb=\E^1\E^0:ve=\E`4\E`1:\
-	:vi=\E`0:vs=\E`2\E`1:
-
-# This is the american terminal. Here tabs work.
-# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
-wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard):\
-	:ct=\E0:st=\E1:tc=wy99f:
-
-#
-#	The Wyse 160 is combination of the WY-60 and the WY-99gt.
-#	The reset strings are slow and the pad times very depending
-#	on other parameters such as font loading.  I have tried
-#	to follow the following outline:
-#
-#		<rs1> -> set personality
-#		<rs2> -> set number of columns
-#		<rs3> -> set number of lines
-#		:i1: -> select the proper font
-#		:is: -> do the initialization
-#		:i3: -> set up display memory (2 pages)
-#
-#	The display memory may be used for either text or graphics.
-#	When "Display Memory = Shared" the terminal will have more pages
-#	but garbage may be left on the screen when you switch from
-#	graphics to text.  If "Display Memory = Unshared" then the
-#	text area will be only one page long.
-#
-# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
-# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-wy160|wyse160|Wyse 160:\
-	:5i:am:bw:hs:km:mi:ms:\
-	:Nl#8:co#80:lh#1:li#24:lw#8:ws#38:\
-	:#2=\E{:%9=\EP:&3=\Er:@8=\E7:DK=\E`b:F1=^AJ\r:F2=^AK\r:\
-	:F3=^AL\r:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:\
-	:RA=\Ed.:RC=\E`c:RX=\Ec20:SA=\Ed/:SX=\Ec21:ae=\EcD:al=\EE:\
-	:as=\EcE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :\
-	:cr=^M:ct=\E0:dc=\EW:dl=\ER:do=^J:ds=\EF\r:ei=\Er:fs=^M:\
-	:ho=\E{:i1=\EcB0\EcC1:i2=\Ew0:im=\Eq:ip=:\
-	:is=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:\
-	:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:\
-	:kl=^H:kr=^L:ku=^K:le=^H:ll=\E{^K:mb=\EG2:\
-	:me=\E(\EH\003\EG0\EcD:mh=\EGp:mp=\E):nd=^L:nw=\r\n:pf=^T:\
-	:pl=\EZ2%+?%s\177:pn=\Ez%+/%s\r:po=\Ed#:ps=\EP:\
-	:px=\EZ1%+?%s\177:r1=\E~!\E~4:r2=\E`\::r3=\EwG\Ee(:sf=\n:\
-	:so=\EGt:sr=\Ej:st=\E1:ta=^I:te=\Ew0:ti=\Ew1:ts=\EF:up=^K:\
-	:vb=\E`8\E`9:ve=\E`1:vi=\E`0:tc=adm+sgr:
-#
-wy160-w|wyse160-w|wyse 160 132-column:\
-	:Nl#16:co#132:lw#7:ws#90:\
-	:cm=\Ea%i%dR%dC:dc=\EW:rs=\EeF\E`;:tc=wy160:
-#
-wy160-25|wyse160-25|wyse 160 80-column 25-lines:\
-	:Nl@:lh@:li#25:lw@:\
-	:pn@:r3=\EwG\Ee):tc=wy160:
-wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines:\
-	:Nl@:lh@:li#25:lw@:\
-	:pn@:r3=\EwG\Ee):tc=wy160-w:
-#
-wy160-42|wyse160-42|wyse 160 80-column 42-lines:\
-	:li#42:\
-	:al=\EE:cd=\Ey:cl=\E+:dl=\ER:i1=\EcB2\EcC3:nw=\r\n:r3=\Ee*:\
-	:sf=\n:sr=\Ej:tc=wy160:
-wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines:\
-	:Nl#16:co#132:lw#7:ws#90:\
-	:cm=\Ea%i%dR%dC:dc=\EW:ip=:rs=\EeF\E`;:tc=wy160-42:
-#
-wy160-43|wyse160-43|wyse 160 80-column 43-lines:\
-	:Nl@:lh@:li#43:lw@:\
-	:pn@:r3=\Ee+:tc=wy160-42:
-wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines:\
-	:Nl@:lh@:li#43:lw@:\
-	:pn@:r3=\Ee+:tc=wy160-42-w:
-#
-wy160-vb|wyse160-vb|Wyse 160 visible bell:\
-	:bl@:tc=wy160:
-wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell:\
-	:bl@:tc=wy160-w:
-#
-#	The Wyse 75 is a vt100 lookalike without advanced video.
-#
-#	   The Wyse 75 can support one attribute (e.g. Dim, Inverse,
-#	Underline) without magic cookies.  The following description
-#	uses this capability, but when more than one attribute is
-#	put on the screen at once, all attributes will be changed
-#	to be the same as the last attribute given.
-#	   The Wyse 75 can support more attributes when used with magic
-#	cookies.  The wy75-mc terminal description uses magic cookies
-#	to correctly handle multiple attributes on a screen.
-#
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-wy75|wyse75|wyse 75:\
-	:am:hs:mi:ms:xn:xo:\
-	:co#80:li#24:ma#1:pb#1201:ws#78:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:\
-	:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
-	:ds=\E[>,\001\001\E[>-\001\001:ec=\E[%dX:ei=\E[4l:fs=^A:\
-	:ho=\E[H:i1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h:\
-	:i2=\E[m:im=\E[4h:ip=:is=\E>\E(B\E)0\017:k1=\E[?5i:\
-	:k2=\E[?3i:k3=\E[2i:k4=\E[@:k5=\E[M:k6=\E[17~:k7=\E[18~:\
-	:k8=\E[19~:k9=\E[20~:kI=\E[@:kN=\E[6~:kP=\E[5~:kb=^H:\
-	:kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:kr=\E[C:\
-	:ks=\E[?1l\E[?7h\E=:ku=\E[A:le=^H:me=\E[m\017:\
-	:mh=\E[0t\E[2m:mr=\E[1t\E[7m:nd=\E[C:rc=\E8:sc=\E7:\
-	:se=\E[m:sf=\n:so=\E[1t\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:ts=\E[>,\001:ue=\E[m:up=\E[A:us=\E[2t\E[4m:\
-	:vb=\E[30h\E,\E[30l:ve=\E[?25h:vi=\E[?25l:
-#
-#	This terminal description uses the non-hidden attribute mode
-#	(with magic cookie).
-#
-wy75-mc|wyse75-mc|wyse 75 with magic cookies:\
-	:ms@:\
-	:ma@:sg#1:ug#1:\
-	:ae=\E[0p\017:as=\E[0p\016:i2=\E[m\E[p:mb=\E[2p:\
-	:me=\E[0p\017:mh=\E[1p:mk=\E[4p:mr=\E[16p:\
-	:..sa=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;:\
-	:se=\E[0p:so=\E[17p:ue=\E[0p:us=\E[8p:tc=wy75:
-wy75-vb|wyse75-vb|wyse 75 with visible bell:\
-	:pb@:\
-	:bl@:tc=wy75:
-wy75-w|wyse75-w|wyse 75 in 132 column mode:\
-	:co#132:ws#130:\
-	:rs=\E[35h\E[?3h:tc=wy75:
-wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns:\
-	:pb@:\
-	:bl@:tc=wy75-w:
-#
-#	Wyse 85 emulating a vt220 7 bit mode.
-#		24 line screen with status line.
-#
-#	The vt220 mode permits more function keys but it wipes out
-#	the escape key.  I strongly recommend that <f11> be set to
-#	escape (esc).
-#	The terminal may have to be set for 8 data bits and 2 stop
-#	bits for the arrow keys to work.
-#	The Wyse 85 runs faster with XON/XOFF enabled.  Also the
-#	:DC: and :IC: work best when XON/XOFF is set.  :IC: and
-#	:DC: leave trash on the screen when used without XON/XOFF.
-#
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-wy85|wyse85|wyse 85:\
-	:am:hs:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:\
-	:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ds=\E[40l:\
-	:ec=\E[%dX:ei=\E[4l:fs=\E[1;24r\E8:ho=\E[H:\
-	:i1=\E[62;1"p\E[?5W:i2=\E>\E(B\E)0\017\E[m:im=\E[4h:ip=:\
-	:is=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
-	:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
-	:kb=^H:kd=\E[B:ke=\E>:kh=\E[26~:kl=\E[D:kr=\E[C:\
-	:ks=\E[?1l\E=:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:\
-	:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=\n:\
-	:so=\E[7m:sr=\EM:st=\EH:ta=\011:ts=\E[40h\E7\E[25;%i%dH:\
-	:ue=\E[m:up=\E[A:us=\E[4m:vb=\E[30h\E,\E[30l:ve=\E[?25h:\
-	:vi=\E[?25l:
-#
-#	Wyse 85 with visual bell.
-wy85-vb|wyse85-vb|wyse 85 with visible bell:\
-	:bl@:vb=\E[30h\E,\E[30l:tc=wy85:
-#
-#	Wyse 85 in 132-column mode.
-wy85-w|wyse85-w|wyse 85 in 132-column mode:\
-	:co#132:ws#132:\
-	:rs=\E[35h\E[?3h:tc=wy85:
-#
-#	Wyse 85 in 132-column mode with visual bell.
-wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns:\
-	:bl@:tc=wy85-w:
-
-# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
-# This copes with an apparent firmware bug in the wy85.  He writes:
-# "What I did was change leave the terminal cursor keys set to Normal
-# (instead of application), and change \E[ to \233 for all the keys in
-# terminfo. At one point, I found some reference indicating that this
-# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
-# me), but I can't find that and the server under my bookmark to "Wyse
-# Technical" isn't responding.  So there's the question of wether the wy85
-# terminfo should reflect the manufactuer's intended behavior of the terminal
-# or the actual."
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode:\
-	:am:hs:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:\
-	:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ds=\E[40l:\
-	:ec=\E[%dX:ei=\E[4l:fs=\E[1;24r\E8:ho=\E[H:\
-	:i1=\E[62;1"p\E[?5W:i2=\E>\E(B\E)0\017\E[m:im=\E[4h:ip=:\
-	:is=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\23317~:k7=\23318~:\
-	:k8=\23319~:k9=\23320~:kD=\2333~:kI=\2332~:kN=\2336~:\
-	:kP=\2335~:kb=^H:kd=\233B:ke=\E>:kh=\23326~:kl=\233D:\
-	:kr=\233C:ks=\E[?1l\E=:ku=\233A:le=^H:mb=\E[5m:md=\E[1m:\
-	:me=\E[m\017:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:\
-	:se=\E[m:sf=\n:so=\E[7m:sr=\EM:st=\EH:ta=\011:\
-	:ts=\E[40h\E7\E[25;%i%dH:ue=\E[m:up=\E[A:us=\E[4m:\
-	:vb=\E[30h\E,\E[30l:ve=\E[?25h:vi=\E[?25l:
-#
-#	Wyse 185 emulating a vt320 7 bit mode.
-#
-#	This terminal always displays 25 lines.  These lines may be used
-#	as 24 data lines and a terminal status line (top or bottom) or
-#	25 data lines.  The 48 and 50 line modes change the page size
-#	and not the number of lines on the screen.
-#
-#	The Compose Character key can be used as a meta key if changed
-#	by set-up.
-#
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-wy185|wyse185|wyse 185:\
-	:am:hs:km:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:\
-	:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
-	:ds=\E7\E[99;0H\E[K\E8:ec=\E[%dX:ei=\E[4l:\
-	:fs=\E[1;24r\E8:ho=\E[H:i1=\E[?5W:\
-	:i2=\E>\E(B\E)0\017\E[m:im=\E[4h:ip=:\
-	:is=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
-	:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
-	:kb=^H:kd=\E[B:ke=\E>:kh=\E[26~:kl=\E[D:kr=\E[C:\
-	:ks=\E[?1l\E=:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:\
-	:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=\n:\
-	:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=\E[ R:ti=\E[ Q:\
-	:ts=\E7\E[99;%i%dH:ue=\E[24m:up=\E[A:us=\E[4m:\
-	:vb=\E[30h\E,\E[30l:ve=\E[34h\E[?25h:vi=\E[?25l:\
-	:vs=\E[?25h\E[34l:
-#
-#	Wyse 185 with 24 data lines and top status (terminal status)
-wy185-24|wyse185-24|wyse 185 with 24 data lines:\
-	:hs@:\
-	:ds@:fs@:r3=\E[?5l\E[47h\E[40l\E[1;24r:ts@:tc=wy185:
-#
-#	Wyse 185 with visual bell.
-wy185-vb|wyse185-vb|wyse 185+flash:\
-	:bl@:tc=wy185:
-#
-#	Wyse 185 in 132-column mode.
-wy185-w|wyse185-w|wyse 185 in 132-column mode:\
-	:co#132:ws#132:\
-	:DC=\E[%dP:IC=\E[%d@:dc=\E[P:ei=:im=:ip=:rs=\E[35h\E[?3h:\
-	:tc=wy185:
-#
-#	Wyse 185 in 132-column mode with visual bell.
-wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols:\
-	:bl@:tc=wy185-w:
-
-# wy325 terminfo entries
-# Done by Joe H. Davis        3-9-92
-
-# lines 25  columns 80
-#
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-wy325|wyse325|Wyse epc:\
-	:5i:am:bw:hs:mi:\
-	:Nl#8:co#80:lh#1:li#24:lw#8:pb#9601:ws#45:\
-	:#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:F3=^AL\r:\
-	:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:RA=\Ed.:\
-	:SA=\Ed/:\
-	:ac=+/,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~:\
-	:ae=\EcD:al=\EE:as=\EcE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E+:\
-	:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=\EW:dl=\ER:do=^J:ds=\EF\r:\
-	:ei=\Er:fs=^M:ho=^^:i1=\EcB0\EcC1:i2=\Ew0:im=\Eq:ip=:\
-	:is=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:\
-	:kE=\ET:kI=\Eq:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:\
-	:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:mb=\EG2:\
-	:me=\E(\EH\003\EG0\EcD:mh=\EGp:mp=\E):nd=^L:pf=^T:\
-	:pl=\EZ2%+?%s\177:pn=\Ez%+/%s\r:po=\Ed#:ps=\EP:\
-	:px=\EZ1%+?%s\177:r1=\E~!\E~4:r2=\EeF\E`\::r3=\EwG\Ee(:\
-	:sf=\n:so=\EGt:sr=\Ej:st=\E1:ta=^I:te=\Ew0:ti=\Ew1:ts=\EF:\
-	:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:tc=adm+sgr:
-
-#
-# lines 24  columns 80  vb
-#
-wy325-vb|wyse325-vb|wyse-325 with visual bell:\
-	:bl@:tc=wy325:
-
-#
-# lines 24  columns 132
-#
-wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode:\
-	:Nl#16:co#132:lw#7:ws#97:\
-	:cm=\Ea%i%dR%dC:dc=\EW:ip=:rs=\E`;:tc=wy325:
-#
-# lines 25  columns 80
-#
-wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines:\
-	:Nl@:lh@:li#25:lw@:\
-	:pn@:r3=\EwG\Ee):tc=wy325:
-#
-# lines 25  columns 132
-#
-wy325-25w|wyse325-25w|wy325 132 columns:\
-	:Nl@:lh@:li#25:lw@:\
-	:pn@:r3=\EwG\Ee):tc=wy325-w:
-#
-# lines 25  columns 132  vb
-#
-wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video:\
-	:bl@:tc=wy325-w:
-
-#
-# lines 42  columns 80
-#
-wy325-42|wyse325-42|wyse-325 42 lines:\
-	:Nl@:lh@:li#42:lw@:\
-	:pn@:r3=\EwG\Ee):tc=wy325:
-#
-# lines 42  columns 132
-#
-wy325-42w|wyse325-42w|wyse-325 42 lines wide mode:\
-	:Nl@:lh@:li#42:lw@:\
-	:pn@:r3=\EwG\Ee):tc=wy325-w:
-#
-# lines 42  columns 132  vb
-#
-wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell:\
-	:bl@:tc=wy325-w:
-#
-# lines 43  columns 80
-#
-wy325-43|wyse325-43|wyse-325 43 lines:\
-	:Nl@:lh@:li#43:lw@:\
-	:pn@:tc=wy325:
-#
-# lines 43  columns 132
-#
-wy325-43w|wyse325-43w|wyse-325 43 lines wide mode:\
-	:Nl@:lh@:li#43:lw@:\
-	:pn@:r3=\EwG\Ee):tc=wy325-w:
-#
-# lines 43  columns 132  vb
-#
-wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell:\
-	:bl@:tc=wy325-w:
-
-#	Wyse 370 -- 24 line screen with status line.
-#
-#	The terminal may have to be set for 8 data bits and 2 stop
-#	bits for the arrow keys to work.
-#
-#	If you change keyboards the terminal will send different
-#	escape sequences.
-#	The following definition is for the basic terminal without
-#	function keys.
-#
-#	<u0> -> enter Tektronix 4010/4014 mode
-#	<u1> -> exit  Tektronix 4010/4014 mode
-#	<u2> -> enter ASCII mode (from any ANSI mode)
-#	<u3> -> exit  ASCII mode (goto native ANSI mode)
-#	<u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
-#	<u5> -> exit  Tek 4207 mode (goto native ANSI mode)
-#
-# Bug: The <op> capability resets attributes.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-wy370-nk|wyse 370 without function keys:\
-	:am:hs:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\
-	:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ds=\E[40l:\
-	:ec=\E[%dX:ei=\E[4l:fs=\E[1;24r\E8:ho=\E[H:\
-	:i1=\E[90;1"p\E[?5W:i2=\E>\017\E)0\E(B\E[63;0w\E[m:\
-	:im=\E[4h:ip=:\
-	:is=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h:\
-	:ke=\E>:ks=\E[?1l\E=:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:\
-	:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=\n:\
-	:so=\E[7m:sr=\EM:st=\EH:ta=\011:te=\E[ R:ti=\E[ Q:\
-	:ts=\E[40l\E[40h\E7\E[99;%i%dH:ue=\E[24m:up=\E[A:\
-	:us=\E[4m:vb=\E[30h\E,\E[30l:ve=\E[34h\E[?25h:\
-	:vi=\E[?25l:vs=\E[?25h\E[34l:
-#
-#	Function key set for the ASCII (wy-50 compatible) keyboard
-#	This is the default 370.
-#
-wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard:\
-	:@8=\EOM:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:\
-	:F5=\E[28~:F6=\E[29~:k1=\E[?4i:k2=\E[?3i:k3=\E[2i:k4=\E[@:\
-	:k5=\E[M:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
-	:k;=\E[21~:kA=\EOP:kB=\E[Z:kD=\EOQ:kI=\EOP:kL=\EOQ:kN=\E[U:\
-	:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
-	:tc=wy370-nk:
-#
-#	Function key set for the VT-320 (and wy85) compatible keyboard
-#
-wy370-105k|Wyse 370 with 105 key keyboard:\
-	:%1=\E[28~:*6=\E[4~:@0=\E[1~:@8=\EOM:F1=\E[23~:F2=\E[24~:\
-	:F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:\
-	:F8=\E[32~:F9=\E[33~:FA=\E[34~:K1=\EOw:K2=\EOu:K3=\EOy:\
-	:K4=\EOq:K5=\EOs:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:\
-	:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:\
-	:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[26~:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:l1=PF1:l2=PF2:l3=PF3:l4=PF4:\
-	:tc=wy370-nk:
-#
-#	Function key set for the PC compatible keyboard
-#
-wy370-EPC|Wyse 370 with 102 key keyboard:\
-	:@7=\E[1~:@8=\EOM:F1=\E[23~:F2=\E[24~:k1=\EOP:k2=\EOQ:\
-	:k3=\EOR:k4=\EOS:k5=\E[M:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
-	:k9=\E[20~:k;=\E[21~:kB=\E[Z:kI=\E[2~:kN=\E[U:kP=\E[V:\
-	:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:tc=wy370-nk:
-#
-#	Wyse 370 with visual bell.
-wy370-vb|Wyse 370 with visible bell:\
-	:bl@:tc=wy370:
-#
-#	Wyse 370 in 132-column mode.
-wy370-w|Wyse 370 in 132-column mode:\
-	:co#132:ws#132:\
-	:rs=\E[35h\E[?3h:tc=wy370:
-#
-#	Wyse 370 in 132-column mode with visual bell.
-wy370-wvb|Wyse 370 with visible bell 132-columns:\
-	:vb=\E[30h\E,\E[30l:tc=wy370-w:
-wy370-rv|Wyse 370 reverse video:\
-	:r3=\E[32h\E[?5h:tc=wy370:
-#
-#	Wyse 99gt Tektronix 4010/4014 emulator,
-#
-wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator:\
-	:am:os:\
-	:co#74:li#35:\
-	:bl=^G:cl=\E^L:\
-	:..cm=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037:\
-	:cr=^M:do=^J:ff=^L:\
-	:hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037:\
-	:ho=^]7`x @\037:\
-	:hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037:\
-	:is=\E8:le=^H:nd=\s:nw=^M^J:u0=\E~>\E8:u1=\E[42h:up=^K:
-#
-#	Wyse 160 Tektronix 4010/4014 emulator,
-#
-wy160-tek|Wyse 160 Tektronix 4010/4014 emulator:\
-	:..cm=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037:\
-	:ho=^]8`g @\037:tc=wy99gt-tek:
-#
-#	Wyse 370 Tektronix 4010/4014 emulator,
-#
-wy370-tek|Wyse 370 Tektronix 4010/4014 emulator:\
-	:am:os:\
-	:co#80:li#36:\
-	:bl=^G:cl=\E^L:\
-	:..cm=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037:\
-	:cr=^M:do=^J:ff=^L:\
-	:hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037:\
-	:ho=^]8g @\037:\
-	:hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037:\
-	:is=\E8:kb=^H:kd=^J:kl=^H:kr=^I:ku=^K:le=^H:nd=\s:nw=^M^J:\
-	:u0=\E[?38h\E8:u1=\E[?38l\E)0:up=^K:
-
-# Vendor-supplied Wyse entries end here.
-
-#
-#TITLE:  TERMINFO ENTRY WY520
-#DATE:   8/5/93
-# The WY520 terminfo is based on the WY285 entry published on the WYSE
-# BBS with the addition of more function keys and special keys.
-#
-#               rs1 -> set personality
-#               rs2 -> set number of columns
-#               rs3 -> set number of lines
-#               is1 -> select the proper font
-#               is2 -> do the initialization
-#               is3 -> If this string is empty then rs3 gets sent.
-#
-#       Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
-#       - The BS key is programmed to generate BS in smcup since
-#         is2 doesn't seem to work.
-#       - Remove and shift/Remove: delete a character
-#       - Insert : enter insert mode
-#       - Find   : delete to end of file
-#       - Select : clear a line
-#       - F11, F12, F13: send default sequences (not ESC, BS, LF)
-#       - F14 : Home key
-#       - Bottom status line (host writable line) is used.
-#       - smkx,rmkx are removed because this would put the numeric
-#         keypad in Dec application mode which doesn't seem to work
-#         with SCO applications.
-#
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-wy520|wyse520|wyse 520:\
-	:am:hs:km:mi:xn:xo:\
-	:co#80:it#8:li#24:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:K1=\EOw:K2=\EOy:K3=\EOu:K4=\EOq:K5=\EOs:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:\
-	:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ds=\E[0$~:\
-	:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:ho=\E[H:i1=\E[?5W:\
-	:i2=\E>\E(B\E)0\017\E[m:im=\E[4h:ip=:\
-	:is=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
-	:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
-	:kb=^H:kd=\E[B:kh=\E[26~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m\017:mh=\E[2m:mr=\E[7m:nd=\E[C:\
-	:rc=\E8:sc=\E7:se=\E[m:sf=\n:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:te=\E[ R:ti=\E[ Q\E[?67;8h:ts=\E[2$~\E[1$}\E[%i%d`:\
-	:ue=\E[24m:up=\E[A:us=\E[4m:ve=\E[34h\E[?25h:vi=\E[?25l:\
-	:vs=\E[?25h\E[34l:
-#
-#       Wyse 520 with 24 data lines and status (terminal status)
-wy520-24|wyse520-24|wyse 520 with 24 data lines:\
-	:hs@:\
-	:ds@:fs@:r3=\E[?5l\E[47h\E[40l\E[1;24r:ts@:tc=wy520:
-#
-#       Wyse 520 with visual bell.
-wy520-vb|wyse520-vb|wyse 520 with visible bell:\
-	:vb=\E[30h\E,\E[30l:tc=wy520:
-#
-#       Wyse 520 in 132-column mode.
-wy520-w|wyse520-w|wyse 520 in 132-column mode:\
-	:co#132:ws#132:\
-	:DC=\E[%dP:IC=\E[%d@:dc=\E[P:ei=:im=:ip=:rs=\E[35h\E[?3h:\
-	:tc=wy520:
-#
-#       Wyse 520 in 132-column mode with visual bell.
-wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns:\
-	:vb=\E[30h\E,\E[30l:tc=wy520-w:
-#
-#
-#       Wyse 520 emulating a vt420 7 bit mode.
-#       The DEL key is programmed to generate BS in is2.
-#       With EPC keyboard.
-#       - 'End' key will clear till end of line on EPC keyboard
-#       - Shift/End : ignored.
-#       - Insert : enter insert mode.
-#       - Delete : delete a character (have to change interrupt character
-#                  to CTRL-C: stty intr '^c') for it to work since the
-#                  Delete key sends 7FH.
-wy520-epc|wyse520-epc|wyse 520 with EPC keyboard:\
-	:@7=\E[4~:k0=\E[21~:k1=\E[11~:k2=\E[12~:k3=\E[13~:\
-	:k4=\E[14~:k5=\E[15~:kD=\177:kE=\E[4~:kh=\E[H:tc=wy520:
-#
-#       Wyse 520 with 24 data lines and status (terminal status)
-#       with EPC keyboard.
-wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard:\
-	:hs@:\
-	:ds@:fs@:r3=\E[?5l\E[47h\E[40l\E[1;24r:ts@:tc=wy520-epc:
-#
-#       Wyse 520 with visual bell.
-wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard:\
-	:vb=\E[30h\E,\E[30l:tc=wy520-epc:
-#
-#       Wyse 520 in 132-column mode.
-wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard:\
-	:co#132:ws#132:\
-	:DC=\E[%dP:IC=\E[%d@:dc=\E[P:ei=:im=:ip=:rs=\E[35h\E[?3h:\
-	:tc=wy520-epc:
-#
-#       Wyse 520 in 132-column mode with visual bell.
-wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard:\
-	:vb=\E[30h\E,\E[30l:tc=wy520-epc-w:
-#
-#       Wyse 520 in 80-column, 36 lines
-wy520-36|wyse520-36|wyse 520 with 36 data lines:\
-	:hs@:\
-	:li#36:\
-	:ds@:fs@:r3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r:ts@:\
-	:tc=wy520:
-#
-#       Wyse 520 in 80-column, 48 lines
-wy520-48|wyse520-48|wyse 520 with 48 data lines:\
-	:hs@:\
-	:li#48:\
-	:ds@:fs@:r3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r:ts@:\
-	:tc=wy520:
-#
-#       Wyse 520 in 132-column, 36 lines
-wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines:\
-	:co#132:ws#132:\
-	:r2=\E[?3h:\
-	:r3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|:\
-	:tc=wy520-36:
-#
-#       Wyse 520 in 132-column, 48 lines
-wy520-48w|wyse520-48w|wyse 520 with 48 data lines:\
-	:co#132:ws#132:\
-	:r2=\E[?3h:\
-	:r3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|:\
-	:tc=wy520-48:
-#
-#
-#       Wyse 520 in 80-column, 36 lines with EPC keyboard
-wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard:\
-	:hs@:\
-	:li#36:\
-	:ds@:fs@:r3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r:ts@:\
-	:tc=wy520-epc:
-#
-#       Wyse 520 in 80-column, 48 lines with EPC keyboard
-wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard:\
-	:hs@:\
-	:li#48:\
-	:ds@:fs@:r3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r:ts@:\
-	:tc=wy520-epc:
-#
-#       Wyse 520 in 132-column, 36 lines with EPC keyboard
-wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard:\
-	:co#132:ws#132:\
-	:r2=\E[?3h:\
-	:r3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|:\
-	:tc=wy520-36pc:
-#
-#       Wyse 520 in 132-column, 48 lines with EPC keyboard
-wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard:\
-	:co#132:ws#132:\
-	:r2=\E[?3h:\
-	:r3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|:\
-	:tc=wy520-48pc:
-
-# From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
-# (wyse-vp: removed :if=/usr/share/tabset/wyse-adds:, there's no such
-# file and we don't know what :st: is -- esr)
-wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on:\
-	:am:bs:\
-	:co#80:it#8:li#24:\
-	:al=\EM:bl=^G:cd=\Ek:ce=\EK:cl=^L:cm=\EY%+ %+ :cr=^M:dc=\EW:\
-	:dl=\El:do=^J:ei=\Er:ho=^A:im=\Eq:is=\E`\:\E`9\017\Er:\
-	:kb=^H:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:le=^H:ll=^A^Z:me=^O:\
-	:nd=^F:nw=^M^J:r1=\E`\:\E`9\017\Er:se=^O:sf=^J:so=^N:ta=^I:\
-	:ue=^O:up=^Z:us=^N:
-
-wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad:\
-	:is=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=:kb=^H:\
-	:kd=\EOB:ke=10\E[?1l\E>:kh=\EOH:kl=\EOD:kr=\EOC:\
-	:ks=10\E[?1h\E=:ku=\EOA:tc=wy75:
-
-# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
-wy100q|Wyse 100 for Quotron:\
-	:bs:\
-	:co#80:li#24:sg#1:\
-	:al=\EE:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :dc=\EW:\
-	:dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:\
-	:is=\E`\:\0\EC\EDF\E0\E'\E(\EA21:kd=^J:kl=^H:kr=^L:ku=^K:\
-	:le=^H:mk@:nd=^L:sr=\Ej:up=^K:tc=adm+sgr:
-
-#### Kermit terminal emulations
-#
-# Obsolete Kermit versions may be listed in the section describing obsolete
-# non-ANSI terminal emulators later in the file.
-#
-
-# KERMIT standard all versions.
-# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
-# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
-# From: greg small <gts@populi.berkeley.edu> 9-25-84
-kermit|standard kermit:\
-	:bs:\
-	:co#80:li#24:\
-	:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :ho=\EH:\
-	:is=K0 Standard Kermit  9-25-84\n:kd=^J:kh=^^:kl=^H:\
-	:kr=^L:ku=^K:le=^H:nd=\EC:up=\EA:
-kermit-am|standard kermit plus auto-margin:\
-	:am:\
-	:is=K1 Standard Kermit plus Automatic Margins\n:\
-	:tc=kermit:
-# IBMPC Kermit 1.2.
-# Bugs: :cd:, :ce:: do not work except at beginning of line!  :cl: does
-# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
-# line).
-# From: greg small <gts@populi.berkeley.edu> 8-30-84
-pckermit|pckermit12|UCB IBMPC Kermit 1.2:\
-	:am:\
-	:li#25:\
-	:cd@:ce@:cl=\EH\EJ:\
-	:is=K2 UCB IBMPC Kermit 1.2  8-30-84\n:tc=kermit:
-# IBMPC Kermit 1.20
-# Cannot use line 25, now acts funny like ansi special scrolling region.
-# Initialization must escape from that region by cursor position to line 24.
-# Cannot use character insert because 1.20 goes crazy if insert at col 80.
-# Does not use :am: because autowrap is lost when kermit dropped and restarted.
-# From: greg small <gts@populi.berkeley.edu> 12-19-84
-pckermit120|UCB IBMPC Kermit 1.20:\
-	:it#8:li#24:\
-	:al=\EL:dc=\EN:dl=\EM:do=\EB:ei@:im@:\
-	:is=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20  12-19-84\n:\
-	:se=\Eq:so=\Ep:ta=^I:vs=\EO\Eq\EEK3:tc=kermit:
-# MS-DOS Kermit 2.27 for the IBMPC
-# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
-# Cannot use line 25, now acts funny like ansi special scrolling region.
-# Initialization must escape from that region by cursor position to line 24.
-# Does not use am: because autowrap is lost when kermit dropped and restarted.
-# Reverse video for standout like H19.
-# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
-# From: greg small <gts@populi.berkeley.edu> 3-17-85
-msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC:\
-	:am@:bs:\
-	:co#80:it#8:li#24:\
-	:al=\EL:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :dc=\EN:dl=\EM:\
-	:do=\EB:ei=\EO:ho=\EH:im=\E@:\
-	:is=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n:\
-	:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:nd=\EC:rc=\Ek:sc=\Ej:\
-	:se=\Eq:so=\Ep:ta=^I:up=\EA:vs=\EO\Eq\EG\EwK4:
-# MS-DOS Kermit 2.27 with automatic margins
-# From:	greg small <gts@populi.berkeley.edu> 3-17-85
-msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins:\
-	:am:\
-	:is=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n:\
-	:vs=\EO\Eq\EG\EvK5:tc=msk227:
-# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
-# Automatic margins now default.  Use ansi :sa: for highlights.
-# Define function keys.
-# (msk22714: removed obsolete ":kn#10:" -- esr)
-# From: greg small <gts@populi.berkeley.edu> 3-17-85
-msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC:\
-	:am:\
-	:is=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n:\
-	:k0=\E0:k1=\E1:k2=\E2:k3=\E3:k4=\E4:k5=\E5:k6=\E6:k7=\E7:\
-	:k8=\E8:k9=\E9:md=\E[1m:me=\E[m:mr=\E[7m:se=\E[m:so=\E[1m:\
-	:ue=\E[m:us=\E[4m:vs=\EO\Eq\EG\EvK6:tc=mskermit227:
-# This was designed for a VT320 emulator, but it is probably a good start
-# at support for the VT320 itself.
-# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
-# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-vt320-k3|MS-Kermit 3.00's vt320 emulation:\
-	:am:es:hs:km:mi:ms:xn:\
-	:co#80:it#8:li#49:pb#9600:vt#3:\
-	:AL=\E[%dL:CC=\E:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SR=\E[%dL:UP=\E[%dA:ae=\E(B:al=\E[L:\
-	:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
-	:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
-	:ds=\E[0$~:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:ho=\E[H:im=\E[4h:\
-	:is=\E>\E F\E[?1l\E[?7h\E[r\E[2$~:k0=\E[21~:k1=\EOP:\
-	:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
-	:k9=\E[20~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:\
-	:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M^J:rc=\E8:\
-	:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:ts=\E[1$}\r\E[K:ue=\E[24m:up=\E[A:us=\E[4m:\
-	:vb=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l:ve=\E[?25h:\
-	:vi=\E[?25l:
-# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
-# ACS capabilities from Philippe De Muyter  <phdm@info.ucl.ac.be> 30 May 1996
-# (I removed a bogus boolean :mo: and added :ms:, <smam>, <rmam> -- esr)
-vt320-k311|dec vt320 series as defined by kermit 3.11:\
-	:am:es:hs:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:vt#3:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=3\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
-	:dl=\E[M:do=^J:ds=\E[2$~\r\E[1$}\E[K\E[$}:ei=\E[4l:\
-	:fs=\E[$}:ho=\E[H:im=\E[4h:\
-	:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
-	:k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
-	:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
-	:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M\ED:\
-	:r1=\E[?3l:rc=\E8:rf=/usr/share/tabset/vt100:sc=\E7:\
-	:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:ts=\E[2$~\E[1$}\E[1;%dH:ue=\E[24m:up=\E[A:us=\E[4m:\
-	:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:vs=\E[?25h:
-
-######## NON-ANSI TERMINAL EMULATIONS
-#
-
-#### Avatar
-#
-# These entries attempt to describe Avatar, a terminal emulation used with
-# MS-DOS bulletin-board systems.  It was designed to give ANSI-like
-# capabilities, but with cheaper (shorter) control sequences.  Messy design,
-# excessively dependent on PC idiosyncracies, but apparently rather popular
-# in the BBS world.
-#
-# No color support.  Avatar doesn't fit either of the Tektronix or HP color
-# models that terminfo knows about.  An Avatar color attribute is the
-# low 7 bits of the IBM-PC display-memory attribute.  Bletch.
-#
-# I wrote these entries while looking at the Avatar spec.  I don't have
-# the facilities to test them.  Let me know if they work, or don't.
-#
-# Avatar escapes not used by these entries (because maybe you're smarter
-# and more motivated than I am and can figure out how to wrap terminfo
-# around some of them, and because they are weird enough to be funny):
-#				level 0:
-# ^L		-- clear window/reset current attribute to default
-# ^V^A%p1%c	-- set current color attribute, parameter decodes as follows:
-#
-#      bit:         6   5   4   3   2   1   0
-#                   |       |   |   |       |
-#                   +---+---+   |   +---+---+
-#                       |       |       |
-#                       |       |  foreground color
-#                       |  foreground intensity
-#                  background color
-#				level 0+:
-# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c	-- scroll (p2,p3) to (p4,p5) up by p1 lines
-# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c	-- scroll (p2,p3) to (p4,p5) down by p1 lines
-# ^V^L%p1%c%p2%c%p3%c		-- clear p2 lines and p3 cols w/attr %p1
-# ^V^M%p1%c%p2%c%p3%c%p4%c	-- fill p3 lines & p4 cols w/char p2+attr %p1
-# (^V^L and ^V^M set the current attribute as a side-effect.)
-# ^V ^Y <a> [...] <c>	-- repeat pattern. <a> specifies the number of bytes
-#			   in the pattern, <c> the number of times the pattern
-#		  	   should be repeated. If either value is 0, no-op.
-#			   The pattern can contain Avatar console codes,
-#			   including other ^V ^Y patterns.
-#				level 1:
-# ^V^O		-- clockwise mode on; turn print direction right each time you
-#		   hit a window edge (yes, really).  Turned off by CR
-# ^V^P		-- no-op
-# ^V^Q%c	-- query the driver
-# ^V^R		-- driver reset
-# ^V^S		-- Sound tone (PC-specific)
-# ^V^T			-- change highlight at current cursor poition to %c
-# ^V^U%p1%c%p2%c	-- highlight window <a> with attribute <b>
-# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
-#			-- define window
-#
-# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
-# (The :mb:/:md:/:mr:/:as:/:us:/:so: capabilities exist only to
-# tell ncurses that the corresponding highlights exist; it should use :sa:,
-# which is the only method that will actually work for multiple highlights.)
-avatar0|avatar terminal emulator level 0:\
-	:am:ms:ut:\
-	:co#80:it#8:li#25:\
-	:as=:ce=^V^G:cm=\026\010%.%.:cr=^M:do=^V^D:le=^V^E:\
-	:mb=^A^V\177:md=^V^A^P:me=^V^A^G:mk=^V^A\0:mr=^A^Vp:\
-	:nd=^V^F:rp=\031%.%d:rs=^L:\
-	:..sa=\026\001%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p4%t{128}%|%;%?%p6%t%{16}%|%;:\
-	:sf=^J:so=^A^Vp:up=^V^C:us=^V^A:tc=klone+acs:
-# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
-avatar0+|avatar terminal emulator level 0+:\
-	:dc=^V^N:ei=\026\n\0\0\0\0:im=^V^I:tc=avatar0:
-# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
-avatar|avatar1|avatar terminal emulator level 1:\
-	:RA=^V":SA=^V$:al=^V+:dl=^V-:ei=^V^P:ve=^V'^A:vi=^V'^B:\
-	:vs=^V^C:tc=avatar0+:
-
-#### RBcomm
-#
-# RBComm is a lean and mean terminal emulator written by the Interrupt List
-# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
-# '90s), especially in the BBS world, and still has some loyal users due to
-# its very small memory footprint and to a cute macro language.
-rbcomm|IBM PC with RBcomm and EMACS keybindings:\
-	:am:bw:mi:ms:xn:\
-	:co#80:it#8:li#25:\
-	:AL=\E[%dL:DL=\E[%dM:al=^K:bl=^G:bt=\E[Z:cd=^F5:ce=^P^P:\
-	:cl=^L:cm=\037%r%+ %+ :cr=^M:cs=\E[%i%d;%dr:dc=^W:dl=^Z:\
-	:dm=:do=^C:ec=\E[%dX:ed=:ei=^]:im=^\:\
-	:is=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g:kb=^H:kd=^N:\
-	:ke=\E>:kh=^A:kl=^B:kr=^F:ks=\E=:ku=^P:le=^H:mb=\E[5m:\
-	:md=\E[1m:me=\E[m:mk=\E[8m:mr=^R:nd=^B:nw=^M\ED:\
-	:r1=\017\E(B\E)0\025\E[?3l\E[>8g:rc=\E8:rp=\030%.%.:\
-	:sc=\E7:se=^U:sf=\ED:so=^R:sr=\EM:ta=^I:te=:ti=:ue=^U:up=^^:\
-	:us=^T:ve=\E[?25h:vi=\E[?25l:vs=\E[?25h:
-rbcomm-nam|IBM PC with RBcomm without autowrap:\
-	:am@:\
-	:bl=^G:cr=^M:do=^J:\
-	:is=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g:kb=^H:kd=^J:\
-	:kl=^H:nw=^M^J:sf=^J:ta=^I:tc=rbcomm:
-rbcomm-w|IBM PC with RBcomm in 132 column mode:\
-	:co#132:\
-	:bl=^G:cr=^M:do=^J:\
-	:is=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g:kb=^H:kd=^J:\
-	:kl=^H:nw=^M^J:sf=^J:ta=^I:tc=rbcomm:
-
-######## LCD DISPLAYS
-#
-
-#### Matrix Orbital
-# from: Eric Z. Ayers  (eric@ale.org)
-#
-# Matrix Orbital 20x4 LCD display
-# Command Character is 0xFE (decimal 254, octal 376)
-#
-# On this device, cursor addressability isn't possible.  The LCD expects:
-#      0xfe G <col> <row>
-#      for cup: %p1 == row and %p2 is column
-#
-# This line:
-#	cup=\376G%p2%c%p1%c
-# LOOKS like it will work, but sometimes only one of the two numbers is sent.
-# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
-#
-# Alas, there is no cursor upline capability on this display.
-#
-# These entries add some 'sanity stuff' to the clear function.  That is, it
-# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
-# and turns off the cursor blinking and stuff like that.
-#
-# NOTE: calling 'beep' turns on the backlight (bell)
-# NOTE: calling 'flash' turns it on and back off (visual bell)
-#
-MtxOrb| Generic Matrix Orbital LCD display:\
-	:bl=\376B^A:cl=\376X\376C\376R\376K\376T:ho=\376H:\
-	:le=\376L:nd=\376M:vb=\376B\001\376F:ve=\376K\376T:
-MtxOrb204| 20x4 Matrix Orbital LCD display:\
-	:co#20:li#4:tc=MtxOrb:
-MtxOrb162| 16x2 Matrix Orbital LCD display:\
-	:co#16:li#2:tc=MtxOrb:
-# The end
-
-######## OLDER TERMINAL TYPES
-#
-# This section is devoted to older commercial terminal brands that are now
-# discontinued, but known to be still in use or represented by emulations.
-#
-
-#### AT&T (att, tty)
-#
-# This section also includes Teletype-branded VDTs.
-#
-# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
-# Boundless Technologies); for details, see the header comment on the ADDS
-# section.
-#
-# These are AT&T's official terminfo entries.  All-caps aliases have been
-# removed.
-#
-att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode:\
-	:am:eo:mi:ms:xo:\
-	:co#80:it#8:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[11r:\
-	:F2=\E[12r:F3=\E[13r:F4=\E[14r:F5=\E[15r:F6=\E[16r:\
-	:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:\
-	:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
-	:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:im=\E[4h:\
-	:k1=\E[1r:k2=\E[2r:k3=\E[3r:k4=\E[4r:k5=\E[5r:k6=\E[6r:\
-	:k7=\E[7r:k8=\E[8r:k9=\E[9r:k;=\E[10r:kA=\E[L:kB=\E[Z:\
-	:kC=\E[J:kD=\E[P:kI=\E[@:kL=\E[M:kb=^H:kd=\E[B:kh=\E[H:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:mr=\E[7m:nd=\E[C:\
-	:pf=\E[4i:po=\E[5i:ps=\E[0i:se=\E[m:sf=^J:so=\E[7m:ta=^I:\
-	:up=\E[A:
-att2350|AT&T 2350 Video Information Terminal 80 column mode:\
-	:pf@:po@:ps@:tc=att2300:
-
-# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
-# Seems upward compatible with vt100, plus ins/del line/char.
-# On sgr, the protection parameter is ignored.
-# No check is made to make sure that only 3 parameters are output.
-# 	standout= reverse + half-intensity = 3 | 5.
-# 	bold= reverse + underline = 2 | 3.
-# note that half-bright blinking doesn't look different from normal blinking.
-# NOTE:you must program the function keys first, label second!
-# (att4410: a BSD entry has been seen with the following capabilities:
-# :is=\E[?6l:, :k1=\EOc:, :k2=\EOd:, :k3=\EOe:, :k4=\EOg:,
-# :k6=\EOh:, :k7=\EOi:, :k8=\EOj:, -- esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1:\
-	:am:hs:mi:ms:xo:\
-	:Nl#8:co#80:it#8:lh#2:li#24:lw#8:ws#80:\
-	:ac=++,,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:\
-	:do=\E[B:ei=:fs=\E8:ho=\E[H:i1=\E[?3l\E)0:\
-	:i2=\E[1;03q   f1           \EOP\E[2;03q   f2           \EOQ\E[3;03q   f3           \EOR\E[4;03q   f4           \EOS\E[5;03q   f5           \EOT\E[6;03q   f6           \EOU\E[7;03q   f7           \EOV\E[8;03q   f8           \EOW:\
-	:ic=\E[@:im=:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:\
-	:k6=\EOU:k7=\EOV:k8=\EOW:kC=\E[2J:kH=\E[24;1H:kb=^H:\
-	:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:ll=\E[24H:\
-	:mb=\E[5m:md=\E[2;7m:me=\E[m\017:mh=\E[2m:mk=\E[8m:\
-	:mr=\E[7m:nd=\E[C:nw=^M^J:rc=\E8:rs=\Ec\E[?3l\E[2;0y:\
-	:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\
-	:ts=\E7\E[25;%+^AH:ue=\E[m:up=\E[A:us=\E[4m:
-
-att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1:\
-	:co#132:ws#132:\
-	:i1=\E[?3h\E)0:rs=\Ec\E[?3h\E[2;0y:tc=att5410v1:
-
-att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2:\
-	:bs:\
-	:..px=\E[%p1%d;%p2%l%02dq   f%p1%d           %p2%s:\
-	:tc=att5410v1:
-
-att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode:\
-	:co#132:ws#132:\
-	:i1=\E[?3h\E)0:rs=\Ec\E[?3h\E[2;0y:tc=att4410:
-
-# 5410 in terms of a vt100
-# (v5410: added <rmam>/<smam> based on init string -- esr)
-v5410|att5410 in terms of a vt100:\
-	:am:mi:ms:xo:\
-	:co#80:it#8:li#24:vt#3:\
-	:@8=\EOM:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:K5=\EOn:RA=\E[?7l:\
-	:SA=\E[?7h:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ei=:ho=\E[H:\
-	:ic=\E[@:im=:k0=\EOy:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
-	:k5=\EOt:k6=\EOu:k7=\EOv:k8=\EOl:k9=\EOw:k;=\EOx:kb=^H:\
-	:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
-	:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:\
-	:nd=\E[C:rc=\E8:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:..sa=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>:\
-	:sc=\E7:se=\E[m:sf=^J:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:\
-	:ue=\E[m:up=\E[A:us=\E[4m:
-
-#
-# Teletype Model 5420 -- A souped up 5410, with multiple windows,
-# even! the 5420 has three modes: scroll, window or page mode
-# this terminfo should work in scroll or window mode, but doesn't
-# take advantage of any of the differences between them.
-#
-# Has memory below (2 lines!)
-# 3 pages of memory (plus some spare)
-# The 5410 sequences for :cm:, :vs:, :DC:, :DL:, :ec:, :vb:, :ho:,
-# <hpa>, :st: would work for these, but these work in both scroll and window
-# mode... Unset insert character so insert mode works
-# :i1: sets 80 column mode,
-# :is: escape sequence:
-# 1) turn off all fonts
-# 2) function keys off, keyboard lock off, control display off,
-#    insert mode off, erasure mode off,
-# 3) full duplex, monitor mode off, send graphics off, nl on lf off
-# 4) reset origin mode
-# 5) set line wraparound
-# 6) exit erasure mode, positional attribute mode, and erasure extent mode
-# 7) clear margins
-# 8) program ENTER to transmit ^J,
-# We use \212 to program the ^J because a bare ^J will get translated by
-# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
-#     1      2            3              4     5     6    7  8
-# :i3: set screen color to black,
-# No representation in terminfo for the delete word key: kdw1=\Ed
-# Key capabilities assume the power-up send sequence...
-# This :te: is not strictly necessary, but it helps maximize
-# memory usefulness: :te=\Ez:,
-# Alternate sgr0:	:me=\E[m\EW^O:,
-# Alternate sgr:	:sa=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;:,
-# smkx programs the SYS PF keys to send a set sequence.
-# It also sets up labels f1, f2, ..., f8, and sends edit keys.
-# This string causes them to send the strings :k1:-:k8:
-# when pressed in SYS PF mode.
-# (att4415: I added <rmam>/<smam> based on the init string -- esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-att4415|tty5420|att5420|AT&T 4415/5420 80 cols:\
-	:bs:db:mi:xo:\
-	:Nl#8:lh#2:lm#78:lw#8:ws#55:\
-	:@1=\Et:@7=\Ez:@8=\Eent:AL=\E[%dL:CM=\E[%i%d;%dt:\
-	:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:LF=\E|:\
-	:LO=\E~:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:SF=\E[%dE:SR=\E[%dF:\
-	:UP=\E[%dA:bt=\E[Z:ch=\E[%+^AG:cl=\E[x\E[J:\
-	:cm=\E[%i%d;%dx:ct=\E[3g:cv=\E[%+^Ad:ec=\E[%ds\E[%dD:\
-	:ei=\E[4l:ho=\E[x:i1=\E[?3l:i2=\E[?5l:ic@:im=\E[4h:\
-	:is=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212:\
-	:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:\
-	:k8=\EOj:kA=\E[L:kB=\E[Z:kD=\E[P:kE=\E[2K:kF=\E[T:kH=\Eu:\
-	:kI=\E[4h:kL=\E[M:kN=\E[U:kP=\E[V:kR=\E[S:\
-	:ke=\E[19;0j\E[21;1j\212:ks=\E[19;1j\E[21;4j\Eent:\
-	:l1=F1:l2=F2:l3=F3:l4=F4:l5=F5:l6=F6:l7=F7:l8=F8:ll=\Ew:\
-	:me=\E[m\017:mp=\EV:pf=\E[?9i:po=\E[?4i:ps=\E[?2i:st=\EH:\
-	:ts=\E7\E[25;%+^HH:vb=\E[?5h\E[?5l:ve=\E[11;0j:\
-	:vs=\E[11;1j:tc=att4410:
-
-att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols:\
-	:co#132:lm#54:ws#97:\
-	:i1=\E[?3h:tc=att4415:
-
-att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv:\
-	:i2=\E[?5h:vb=\E[?5l\E[?5h:tc=att4415:
-
-att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv:\
-	:co#132:lm#54:ws#97:\
-	:i1=\E[?3h:i2=\E[?5h:vb=\E[?5l\E[?5h:tc=att4415:
-
-# Note that this mode permits programming USER PF KEYS and labels
-# However, when you program user pf labels you have to reselect
-# user pf keys to make them appear!
-att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels:\
-	:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:\
-	:..pn=\E[%p1%d;0;0;1q%p2%\:-16.16s:\
-	:..px=\E[%p1%d;%p2%l%02d;0;1q   F%p1%d           %p2%s:
-
-att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels:\
-	:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:tc=att4415:
-
-att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels:\
-	:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:tc=att4415-rv:
-
-att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels:\
-	:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:tc=att4415-w:
-
-att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels:\
-	:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:\
-	:tc=att4415-w-rv:
-
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-att5420_2|AT&T 5420 model 2 80 cols:\
-	:am:db:hs:mi:ms:xo:\
-	:co#80:it#8:li#24:lm#78:ws#55:\
-	:AL=\E[%dL:CM=\E[%i%d;%dt:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dE:SR=\E[%dF:UP=\E[%dA:ae=^O:\
-	:al=\E[L:as=^N:bt=\E[1Z:cd=\E[0J:ce=\E[0K:cl=\EH\EJ:\
-	:cm=\E[%i%d;%dH:cr=\EG:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
-	:dl=\E[M:do=\E[1B:ec=\E[%ds\E[%dD:ei=:fs=\E8:ho=\E[H:\
-	:i1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r:\
-	:ic=\E[@:im=:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:\
-	:k6=\EOh:k7=\EOi:k8=\EOj:kD=\E[P:kH=\Eu:kI=\E[4h:kN=\E[U:\
-	:kP=\E[V:kb=^H:kd=\E[B:ke=\E[19;0j:kh=\E[H:kl=\E[D:kr=\E[C:\
-	:ks=\E[19;1j:ku=\E[A:le=^H:ll=\Ew:mb=\E[5m:me=\E[m\017:\
-	:mh=\E[2m:mr=\E[7m:nd=\E[1C:nw=^M^J:rc=\E8:\
-	:rs=\Ec\E[?3l\E[2;0y:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:\
-	:st=\EH:ta=^I:ts=\E7\E[25;%+^HH:ue=\E[m:us=\E[4m:\
-	:vb=\E[?5h\E[?5l:ve=\E[11;0j:vs=\E[11;1j:
-att5420_2-w|AT&T 5420 model 2 in 132 column mode:\
-	:co#132:\
-	:i1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r:\
-	:tc=att5420_2:
-
-att4418|att5418|AT&T 5418 80 cols:\
-	:am:xo:\
-	:co#80:li#24:\
-	:@8=\E[:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[n:\
-	:F2=\E[o:F3=\E[H:F4=\E[I:F5=\E[J:F8=\E[K:F9=\E[L:FA=\E[E:\
-	:FB=\E[_:FC=\E[M:FD=\E[N:FE=\E[O:IC=\E[%d@:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=\E[1L:as=^N:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:\
-	:cm=\E[%i%d;%dH:cr=^M:dc=\E[1P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
-	:i1=\E[?3l:ic=\E[1@:im=:is=\E)0\E?6l\E?5l:k1=\E[h:k2=\E[i:\
-	:k3=\E[j:k6=\E[k:k7=\E[l:k8=\E[f:k9=\E[w:k;=\E[m:kC=\E[%%%:\
-	:kd=\EU:kh=\Ec:kl=\E@:kr=\EA:ku=\ES:le=\E[D:mb=\E[5m:\
-	:me=\E[m\017:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:\
-	:se=\E[m:sf=^J:so=\E[7m:ue=\E[m:up=\E[A:us=\E[4m:
-att4418-w|att5418-w|AT&T 5418 132 cols:\
-	:co#132:\
-	:i1=\E[?3h:tc=att5418:
-
-att4420|tty4420|teletype 4420:\
-	:bs:da:db:eo:ms:ul:xo:\
-	:co#80:li#24:lm#72:\
-	:al=\EL:bl=^G:cd=\EJ:ce=\Ez:cl=\EH\EJ:cm=\EY%+ %+ :cr=\EG:\
-	:dc=\EP:dl=\EM:dm@:do=\EB:ed@:ho=\EH:k0=\EU:k3=\E@:kA=\EL:\
-	:kB=\EO:kC=\EJ:kD=\EP:kF=\ES:kI=\E^:kL=\EM:kR=\ET:kd=\EB:\
-	:kh=\EH:kl=^H:kr=\EC:ku=\EA:l0=segment advance:\
-	:l3=cursor tab:le=\ED:nd=\EC:se=\E~:sf=\EH\EM\EY7\s:\
-	:so=\E}:ue=\EZ:up=\EA:us=\E\\:
-
-#  The following is a terminfo entry for the Teletype 4424
-#  asynchronous keyboard-display terminal.  It supports
-#  the vi editor.  The terminal must be set up as follows,
-#
-# 	HIGHLIGHT DEFINITION	3-TONE
-# 	DISPLAY FUNCTION	GROUP III
-#
-#  The second entry below provides limited (a la adm3a)
-#  operation under GROUP II.
-#
-#  This must be used with DISPLAY FUNCTION GROUP I or III
-# 	and HIGHLIGHT DEFINITION 3-TONE
-# The terminal has either bold or blink, depending on options
-#
-# (att4424: commented out :ti:=\E[1m, we don't need bright locked on -- esr)
-att4424|tty4424|teletype 4424:\
-	:am:bs:xo:\
-	:co#80:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=\E(B:al=\EL:as=\E(0:bl=^G:bt=\EO:cd=\EJ:ce=\Ez:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\EF:\
-	:dc=\EP:dl=\EM:do=\EB:ei=:ho=\E[H:ic=\E^:im=:\
-	:is=\E[20l\E[?7h:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kC=\EJ:\
-	:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E3:\
-	:md=\E3:me=\EX\E~\EZ\E4\E(B:mh=\EW:mr=\E}:nd=\EC:nw=\EE:\
-	:..sa=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m:\
-	:se=\E~:sf=^J:so=\E}:sr=\ET:st=\EH:ta=^I:ue=\EZ:up=\EA:\
-	:us=\E\\:
-
-att4424-1|tty4424-1|teletype 4424 in display function group I:\
-	:kC@:kd=\EB:kh@:kl=\ED:kr=\EC:ku=\EA:tc=att4424:
-
-# This entry is not one of AT&T's official ones, it was translated from the
-# 4.4BSD termcap file.  The highlight strings are different from att4424.
-# I have no idea why this is -- older firmware version, maybe?
-# The following two lines are the comment originally attached to the entry:
-# This entry appears to avoid the top line - I have no idea why.
-# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
-att4424m|tty4424m|teletype 4424M:\
-	:am:da:db:mi:\
-	:co#80:it#8:li#23:\
-	:al=\EL:bl=^G:ce=\E[K:cl=\E[2;H\E[J:cm=\E[%i%2;%2H\E[B:\
-	:cr=^M:dc=\EP:dl=\EM:do=^J:ei=:ic=\E^:im=:ip=2:\
-	:is=\E[m\E[2;24r:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:\
-	:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:\
-	:nd=\E[C:nw=^M^J:se=\E[m:sf=^J:so=\E[7m:sr=\ET:ta=^I:\
-	:ue=\E[m:up=\E[A:us=\E[4m:
-
-# The Teletype 5425 is really version 2 of the Teletype 5420. It
-# is quite similar, except for some minor differences. No page
-# mode, for example, so all of the :cm: sequences used above have
-# to change back to what's being used for the 5410. Many of the
-# option settings have changed their numbering as well.
-#
-# This has been tested on a preliminary model.
-#
-# (att5425: added <rmam>/<smam> based on the init string -- esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-att5425|tty5425|att4425|AT&T 4425/5425:\
-	:am:da:db:hs:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:lm#78:ws#55:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dE:SR=\E[%dF:UP=\E[%dA:ae=^O:\
-	:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
-	:dl=\E[M:do=^J:ec=\E[%ds\E[%dD:ei=\E[4l:fs=\E8:ho=\E[H:\
-	:i1=\E<\E[?3l:i2=\E[?5l:im=\E[4h:\
-	:is=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212:\
-	:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:\
-	:k8=\EOj:kD=\E[P:kI=\E[4h:kb=^H:kd=\E[B:\
-	:ke=\E[21;0j\E[25;1j\212:kh=\E[H:kl=\E[D:kr=\E[C:\
-	:ks=\E[21;1j\E[25;4j\Eent\E~:ku=\E[A:le=^H:ll=\E[24H:\
-	:mb=\E[5m:md=\E[2;7m:me=\E[m\017:mh=\E[2m:mr=\E[7m:\
-	:nd=\E[C:nw=^M^J:rc=\E8:rs=\Ec\E[?3l\E[2;0y:sc=\E7:\
-	:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:ts=\E7\E[25;%+^HH:ue=\E[m:up=\E[A:us=\E[4m:\
-	:vb=\E[?5h\E[?5l:ve=\E[12;0j:vs=\E[12;1j:
-
-att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels:\
-	:ks=\E[21;1j\E[25;4j\Eent:tc=att4425:
-
-att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode:\
-	:co#132:lm#54:ws#97:\
-	:i1=\E[?3h:tc=tty5425:
-
-# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
-# I also added <rmam>/<smam> -- esr)
-att4426|tty4426|teletype 4426S:\
-	:am:da:db:xo:\
-	:co#80:li#24:lm#48:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:SF=\E[%dS:\
-	:SR=\E[%dT:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=\E(B:al=\EL:as=\E(0:bl=^G:cd=\E[J:ce=\E[0K:ch=\E[%dG:\
-	:cl=\E[H\E[2J\E[1U\E[H\E[2J\E[1V:cm=\E[%i%d;%dH:cr=^M:\
-	:ct=\E[3g:cv=\E[%dd:dc=\EP:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
-	:i1=\Ec\E[?7h:ic=\E^:im=:is=\E[m\E[1;24r:k1=\EOP:k2=\EOQ:\
-	:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:kB=\EO:\
-	:kC=\E[2J:kH=\E[24;1H:kb=^H:kd=\EB:kh=\E[H:kl=\ED:kr=\EC:\
-	:ku=\EA:le=\E[D:ll=\E[24H:md=\E[5m:me=\E[m\E(B:mr=\E[7m:\
-	:nd=\E[C:nw=^M^J:rc=\E8:rs=\Ec\E[?3l\E[2;0y:sc=\E7:\
-	:se=\E[m:sf=^J:so=\E[5m:sr=\ET:st=\E1:ta=^I:ue=\E[m:up=\EA:\
-	:us=\E[4m:
-
-# Terminfo entry for the AT&T 510 A Personal Terminal
-# Function keys 9 - 16 are available only after the
-# screen labeled (soft keys/action blocks) are labeled.  Function key
-# 9 corresponds to the leftmost touch target on the screen,
-# function key 16 corresponds to the rightmost.
-#
-# This entry is based on one done by Ernie Rice at Summit, NJ and
-# changed by Anne Gallup, Skokie, IL, ttrdc!anne
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-att510a|bct510a|AT&T 510A Personal Terminal:\
-	:am:mi:ms:xn:xo:\
-	:Nl#8:co#80:lh#2:li#24:lw#7:\
-	:#4=\E[u:%i=\E[v:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
-	:F1=\EOe:F2=\EOf:F3=\EOg:F4=\EOh:F5=\EOi:F6=\EOj:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:\
-	:ac=+g,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~:\
-	:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[0J:\
-	:ce=\E[0K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
-	:dc=\E[P:dl=\E[M:do=\E[1B:eA=\E(B\E)1:ff=^L:ho=\E[H:\
-	:i1=\E(B\E)1\E[2l:i2=\E[21;1|\212:k1=\EOm:k2=\EOV:\
-	:k3=\EOu:k4=\ENj:k5=\ENe:k6=\ENf:k7=\ENh:k8=\E[H:k9=\EOc:\
-	:k;=\EOd:kB=\E[Z:kF=\E[S:kR=\E[T:kb=^H:kd=\E[B:ke=\E[19;0|:\
-	:kl=\E[D:kr=\E[C:ks=\E[19;1|:ku=\E[A:le=^H:mb=\E[5m:\
-	:md=\E[2;7m:me=\E[m\017:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:\
-	:pf=\E[?8i:po=\E[?4i:ps=\E[0i:rc=\E8:sc=\E7:se=\E[m:sf=^J:\
-	:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:\
-	:ve=\E[11;3|:vi=\E[11;0|:vs=\E[11;2|:
-
-# Terminfo entry for the AT&T 510 D Personal Terminal
-# Function keys 9 through 16 are accessed by bringing up the
-# system blocks.
-# Function key 9 corresponds to the leftmost touch target on the screen,
-# function key 16 corresponds to the rightmost.
-#
-# There are problems with soft key labeling.  These are due to
-# strangenesses in the native terminal that are impossible to
-# describe in a terminfo.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-att510d|bct510d|AT&T 510D Personal Terminal:\
-	:am:da:db:mi:ms:xn:xo:\
-	:co#80:li#24:lm#48:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:\
-	:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[0J:ce=\E[0K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[1B:\
-	:ei=\E[4l:ff=^L:ho=\E[H:i1=\E(B\E)1\E[5;0|:\
-	:i2=\E[21;1|\212:im=\E[4h:k1=\EOm:k2=\EOV:k3=\EOu:k4=\ENj:\
-	:k5=\ENe:k6=\ENf:k7=\ENh:k8=\E[H:k9=\EOc:kb=^H:kd=\E[B:\
-	:ke=\E[19;0|:kl=\E[D:kr=\E[C:ks=\E[19;1|:ku=\E[A:le=^H:\
-	:ll=\E#2:mb=\E[5m:md=\E[2;7m:me=\E[m\017:mh=\E[2m:\
-	:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:rs=\E[5;0|:sc=\E7:se=\E[m:\
-	:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:\
-	:us=\E[4m:ve=\E[11;3|:vs=\E[11;2|:
-
-# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-att500|att513|AT&T 513 using page mode:\
-	:am:mi:ms:xn:xo:\
-	:co#80:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dE:SR=\E[%dF:UP=\E[%dA:ae=^O:\
-	:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=%i\E[%d;%dr:ct=\E[3g:dc=\E[P:\
-	:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\
-	:i1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l:\
-	:im=\E[4h:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:\
-	:k7=\EOi:k8=\EOj:kD=\ENf:kI=\ENj:kN=\E[U:kP=\E[V:kb=^H:\
-	:kd=\E[B:ke=\E[19;0|\E[21;1|\212:kh=\E[H:kl=\E[D:kr=\E[C:\
-	:ks=\E[19;1|\E[21;4|\Eent:ku=\E[A:le=^H:ll=\E#2:mb=\E[5m:\
-	:md=\E[2;7m:me=\E[m\017:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:\
-	:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[11;0|:vs=\E[11;1|:
-
-# 01-07-88
-# printer must be set to EMUL ANSI to accept ESC codes
-# :up: stops at top margin
-# :i1: sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
-#	and alt font ascii,wrap on,tabs cleared
-# :is: disables newline on LF,Emphasized off
-# The <u0> capability sets form length
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-att5310|att5320|AT&T Model 53210 or 5320 matrix printer:\
-	:YA:YD:\
-	:Ya#8192:Yi#10:Yj#12:Yk#100:Yl#72:Ym#120:co#132:it#8:li#66:\
-	:DO=\E[%de:RI=\E[%da:ZM=\E[5m:ZU=\E[m:Zl=\E[;%dr:\
-	:Zm=\E[%+^As:Zn=\E[;%+^As:Zp=\E[%dr:ch=\E[%d`:cr=^M:\
-	:cv=\E[%dd:do=^J:ff=^L:i1=\Ec:is=\E[20l\r:nd=\s:ta=^I:\
-	:u0=\E[%dt:up=\EM:
-
-# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
-# The following SET-UP modes are assumed for normal operation:
-#	CR_DEF=CR	NL_DEF=INDEX	DUPLEX=FULL
-# Other SET-UP modes may be set for operator convenience or communication
-# requirements.  This termcap description is for the Resident Terminal Mode.
-# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# The BRL entry also said: UNSAFE :ll=\E[70H:
-att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs:\
-	:am:xo:\
-	:co#88:it#8:li#70:vt#3:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:SF=\E[%dS:\
-	:SR=\E[%dT:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=:ho=\E[H:\
-	:ic=\E[@:im=:kC=\E[2J:kH=\E[70;1H:kb=^H:kd=\E[B:kh=\E[H:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:nd=\E[C:nw=^M^J:r1=\Ec:\
-	:rc=\E8:sc=\E7:sf=^J:sr=\E[T:ta=^I:up=\E[A:
-
-# 5620 terminfo  (2.0 or later ROMS with char attributes)
-# The following SET-UP modes are assumed for normal operation:
-#	DUPLEX=FULL	GEN_FLOW=ON	NEWLINE=INDEX	RETURN=CR
-# Other SET-UP modes may be set for operator convenience or communication
-# requirements.  This termcap description is for Resident Terminal Mode.  No
-# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# assumptions: :sf: (scroll forward one line) is only done at screen bottom
-# Be aware that older versions of the dmd have a firmware bug that affects
-# parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
-# :ms: is from an otherwise inferior BRL for this terminal.  That entry
-# also has :ll:=\E[70H commented out and marked unsafe.
-# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
-att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns:\
-	:NL:NP:am:bs:ms:xo:\
-	:co#88:it#8:li#70:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:SF=\E[%dS:\
-	:SR=\E[%dT:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
-	:ic=\E[@:im=:kC=\E[2J:kH=\E[70;1H:kb=^H:kd=\E[B:kh=\E[H:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:md=\E[2m:me=\E[0m:mh=\E[2m:\
-	:mr=\E[7m:nd=\E[C:nw=^J:..px=\E[%p1%d;%p2%l%dq%p2%s:\
-	:r1=\Ec:rc=\E8:sc=\E7:se=\E[0m:sf=\E[S:so=\E[7m:sr=\E[T:\
-	:ta=^I:ue=\E[0m:up=\E[A:us=\E[4m:
-att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer:\
-	:li#24:tc=att5620:
-att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer:\
-	:li#34:tc=att5620:
-# 5620 layer running the "S" system's downloaded graphics handler:
-att5620-s|tty5620-s|layer|vitty|5620 S layer:\
-	:am:bs:pt:\
-	:co#80:it#8:li#72:\
-	:al=\EI:bl=^G:ce=\EK:cl=^L:cm=\EY%r%+ %+ :cr=^M:dl=\ED:\
-	:do=^J:kC=\E[2J:kH=\E[70;1H:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
-	:kr=\E[C:ku=\E[A:le=^H:sf=^J:ta=^I:up=^K:vb=\E^G:
-
-# Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
-#
-# Entries for <kf29> thru <kf46> refer to the alternate keypad mode
-# keys:  = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-att605|AT&T 605 80 column 102key keyboard:\
-	:am:eo:xo:\
-	:co#80:li#24:ws#80:\
-	:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:ae=^O:al=\E[L:as=\E)0\016:\
-	:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
-	:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:fs=\E8:\
-	:i1=\E[8;0|\E[?\E[13;20l\E[?\E[12h:ic=\E[@:im=\E[4h:\
-	:is=\E[m\017:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:\
-	:k6=\EOh:k7=\EOi:k8=\EOj:k9=\ENo:kD=\E[P:kI=\E[@:kN=\E[U:\
-	:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
-	:le=^H:ll=\E[24H:mb=\E[5m:md=\E[1m:me=\E[m\017:mh=\E[2m:\
-	:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:rs=\Ec\E[?3l:sc=\E7:\
-	:se=\E[m:sf=^J:so=\E[7m:ta=^I:ts=\E7\E[25;%i%dx:ue=\E[m:\
-	:up=\E[A:us=\E[4m:
-att605-pc|ATT 605 in pc term mode:\
-	:@7=\E[F:S4=250\E[?11l\E[50;1|:S5=400\E[50;0|:XF=g:XN=e:\
-	:ac=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263:\
-	:al=\E[L:bt=\E[Z:dc=\E[P:dl=\E[M:do=\E[B:ei=:ic=\E[@:im=:\
-	:k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:\
-	:k8=\E[T:k9=\E[U:k;=\E[V:kB=\E[Z:kD=\E[P:kI=\E[@:kL=\E[M:\
-	:kN=\E[G:kP=\E[I:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
-	:le=\E[D:nd=\E[C:up=\E[A:tc=att605:
-att605-w|AT&T 605-w 132 column 102 key keyboard:\
-	:co#132:ws#132:\
-	:i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0:\
-	:tc=att605:
-# (att610: I added <rmam>/<smam> based on the init string.  I also
-# added :SF: and :SR: because the BSD file says the att615s have them,
-# and the 615 is like a 610 with a big keyboard, and most of their other
-# smart terminals support the same sequence -- esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-att610|AT&T 610; 80 column; 98key keyboard:\
-	:am:es:hs:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:\
-	:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:\
-	:do=\E[B:ei=\E[4l:fs=\E8:ho=\E[H:\
-	:i1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0:\
-	:i2=\E(B\E)0:im=\E[4h:is=\E[m\017:k1=\EOc:k2=\EOd:k3=\EOe:\
-	:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:k9=\ENo:kb=^H:\
-	:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:ll=\E[24H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m\017:mh=\E[2m:mr=\E[7m:nd=\E[C:\
-	:nw=\EE:rc=\E8:rs=\Ec\E[?3l:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:\
-	:sr=\EM:ta=^I:ts=\E7\E[25;%i%dx:ue=\E[m:up=\E[A:us=\E[4m:\
-	:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
-	:vs=\E[?12;25h:
-att610-w|AT&T 610; 132 column; 98key keyboard:\
-	:co#132:ws#132:\
-	:i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:\
-	:tc=att610:
-
-att610-103k|AT&T 610; 80 column; 103key keyboard:\
-	:!1=\EOO:!2=\EOP:!3=\EOS:#1=\EOM:%0=\EOt:%1=\EOm:%2=\ENi:\
-	:%3=\EOl:%4=\ENc:%5=\ENh:%6=\EOv:%7=\EOr:%8=\ENg:%9=\EOz:\
-	:%a=\EOL:%b=\ENC:%c=\ENH:%d=\EOR:%e=\ENG:%f=\EOZ:%g=\EOT:\
-	:%h=\EOY:%j=\EOQ:&0=\EOW:&1=\EOb:&2=\ENa:&3=\EOy:&4=\EOB:\
-	:&5=\EOq:&6=\EOo:&7=\EOp:&8=\EOs:&9=\ENB:*0=\EOX:*1=\EOU:\
-	:*2=\END:*3=\EON:*4=\ENF:*5=\ENE:*6=\ENI:*7=\ENN:*8=\EOA:\
-	:*9=\EOK:@0=\EOx:@1=\E9:@2=\EOw:@3=\EOV:@4=\EOu:@5=\ENd:\
-	:@6=\EOn:@7=\E0:@8=^M:@9=\EOk:F1@:F2@:F3@:F4@:k9@:k;@:kD=\ENf:\
-	:kE=\EOa:kI=\ENj:kL=\ENe:kM=\ENj:kN=\E[U:kP=\E[V:tc=att610:
-att610-103k-w|AT&T 610; 132 column; 103key keyboard:\
-	:co#132:ws#132:\
-	:i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:\
-	:tc=att610-103k:
-att615|AT&T 615; 80 column; 98key keyboard:\
-	:#4=\E[ A:%i=\E[ @:F5=\EOC:F6=\EOD:F7=\EOE:F8=\EOF:F9=\EOG:\
-	:FA=\EOH:FB=\EOI:FC=\EOJ:FD=\ENO:FE=\ENP:FF=\ENQ:FG=\ENR:\
-	:FH=\ENS:FI=\ENT:FJ=\EOP:FK=\EOQ:FL=\EOR:FM=\EOS:FN=\EOw:\
-	:FO=\EOx:FP=\EOy:FQ=\EOm:FR=\EOt:FS=\EOu:FT=\EOv:FU=\EOl:\
-	:FV=\EOq:FW=\EOr:FX=\EOs:FY=\EOp:FZ=\EOn:Fa=\EOM:tc=att610:
-att615-w|AT&T 615; 132 column; 98key keyboard:\
-	:#4=\E[ A:%i=\E[ @:F5=\EOC:F6=\EOD:F7=\EOE:F8=\EOF:F9=\EOG:\
-	:FA=\EOH:FB=\EOI:FC=\EOJ:FD=\ENO:FE=\ENP:FF=\ENQ:FG=\ENR:\
-	:FH=\ENS:FI=\ENT:FJ=\EOP:FK=\EOQ:FL=\EOR:FM=\EOS:FN=\EOw:\
-	:FO=\EOx:FP=\EOy:FQ=\EOm:FR=\EOt:FS=\EOu:FT=\EOv:FU=\EOl:\
-	:FV=\EOq:FW=\EOr:FX=\EOs:FY=\EOp:FZ=\EOn:Fa=\EOM:\
-	:tc=att610-w:
-att615-103k|AT&T 615; 80 column; 103key keyboard:\
-	:#4=\E[ A:%i=\E[ @:tc=att610-103k:
-att615-103k-w|AT&T 615; 132 column; 103key keyboard:\
-	:#4=\E[ A:%i=\E[ @:tc=att610-103k-w:
-# (att620: I added <rmam>/<smam> based on the init string and
-# :SR:/:SF: from a BSD termcap -- esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-att620|AT&T 620; 80 column; 98key keyboard:\
-	:am:es:hs:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
-	:ae=\E(B\017:al=\E[L:as=\E)0\016:bl=^G:bt=\E[Z:cd=\E[J:\
-	:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:fs=\E8:ho=\E[H:\
-	:i1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h:\
-	:i2=\E(B\E)0:im=\E[4h:is=\E[m\017:k1=\EOc:k2=\EOd:k3=\EOe:\
-	:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:k9=\ENo:kb=^H:\
-	:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:ll=\E[24H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m\E(B\017:mh=\E[2m:mr=\E[7m:\
-	:nd=\E[C:nw=\EE:rc=\E8:rs=\Ec\E[?3l:sc=\E7:se=\E[m:sf=\ED:\
-	:so=\E[7m:sr=\EM:ta=^I:ts=\E7\E[25;%i%dx:ue=\E[m:up=\E[A:\
-	:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
-	:vs=\E[?12;25h:
-att620-w|AT&T 620; 132 column; 98key keyboard:\
-	:co#132:ws#132:\
-	:i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:\
-	:tc=att620:
-att620-103k|AT&T 620; 80 column; 103key keyboard:\
-	:!1=\EOO:!2=\EOP:!3=\EOS:#1=\EOM:%0=\EOt:%1=\EOm:%2=\ENi:\
-	:%3=\EOl:%4=\ENc:%5=\ENh:%6=\EOv:%7=\EOr:%8=\ENg:%9=\EOz:\
-	:%a=\EOL:%b=\ENC:%c=\ENH:%d=\EOR:%e=\ENG:%f=\EOZ:%g=\EOT:\
-	:%h=\EOY:%j=\EOQ:&0=\EOW:&1=\EOb:&2=\ENa:&3=\EOy:&4=\EOB:\
-	:&5=\EOq:&6=\EOo:&7=\EOp:&8=\EOs:&9=\ENB:*0=\EOX:*1=\EOU:\
-	:*2=\END:*3=\EON:*4=\ENF:*5=\ENE:*6=\ENI:*7=\ENN:*8=\EOA:\
-	:*9=\EOK:@0=\EOx:@1=\E9:@2=\EOw:@3=\EOV:@4=\EOu:@5=\ENd:\
-	:@6=\EOn:@7=\E0:@8=^M:@9=\EOk:F1@:F2@:F3@:F4@:F5@:F6@:F7@:F8@:\
-	:F9@:FA@:FB@:FC@:FD@:FE@:FF@:FG@:FH@:FI@:FJ@:FK@:FL@:FM@:FN@:FO@:FP@:\
-	:FQ@:FR@:FS@:FT@:FU@:FV@:FW@:FX@:FY@:FZ@:Fa@:k9@:k;@:kD=\ENf:\
-	:kE=\EOa:kI=\ENj:kL=\ENe:kM=\ENj:kN=\E[U:kP=\E[V:tc=att620:
-
-att620-103k-w|AT&T 620; 132 column; 103key keyboard:\
-	:co#132:ws#132:\
-	:i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:\
-	:tc=att620-103k:
-
-# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
-# The following SETUP modes are assumed for normal operation:
-#	Local_Echo=Off	Gen_Flow=On	Return=CR	Received_Newline=LF
-#	Font_Size=Large		Non-Layers_Window_Cols=80
-#				Non-Layers_Window_Rows=60
-# Other SETUP modes may be set for operator convenience or communication
-# requirements.  Some capabilities assume a printer attached to the Aux EIA
-# port.  This termcap description is for the Fixed Non-Layers Window.  No
-# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# (att630: added :ic:, :mb: and :mh: from a BSD termcap file -- esr)
-att630|AT&T 630 windowing terminal:\
-	:NP:am:bs:da:db:mi:ms:xo:\
-	:co#80:it#8:li#60:lm#0:\
-	:@8=^M:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\ENq:\
-	:F2=\ENr:F3=\ENs:F4=\ENt:F5=\ENu:F6=\ENv:F7=\ENw:F8=\ENx:\
-	:F9=\ENy:FA=\ENz:FB=\EN{:FC=\EN|:FD=\EN}:FE=\EN~:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
-	:al=\E[L:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:\
-	:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:is=\E[m:k9=\ENo:k;=\ENp:\
-	:kA=\E[L:kB=\E[Z:kC=\E[2J:kD=\E[P:kI=\E[@:kL=\E[M:kb=^H:\
-	:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:\
-	:me=\E[m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=^M^J:pf=\E[?4i:\
-	:po=\E[?5i:..px=\E[%p1%d;%p2%l%dq%p2%s:rc=\E8:rs=\Ec:\
-	:..sa=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m:\
-	:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\
-	:up=\E[A:us=\E[4m:
-att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines:\
-	:li#24:tc=att630:
-
-# This is the att700 entry for 700 native emulation of the AT&T 700
-# terminal.  Comments are relative to changes from the 605V2 entry and
-# att730 on which the entry is based.  Comments show the terminfo
-# capability name, termcap name, and description.
-#
-# Here is what's going onm in the init string:
-#	ESC [ 50;4|	set 700 native mode (really is 605)
-# x	ESC [ 56;ps| 	set lines to 24: ps=0; 40: ps=1 (plus status line)
-#	ESC [ 53;0|	set GenFlow to Xon/Xoff
-#	ESC [ 8 ;0|	set CR on NL
-# x	ESC [ ? 3 l/h	set workspace: 80 col(l); 132 col(h)
-#	ESC [ ? 4 l	jump scroll
-#	ESC [ ? 5 l/h	video: normal (l); reverse (h)
-#	ESC [ ?13 l	Labels on
-#	ESC [ ?15 l	parity check = no
-#	ESC [ 13 l	monitor mode off
-#	ESC [ 20 l	LF on NL (not CRLF on NL)
-#	ESC [ ? 7 h	autowrap on
-#	ESC [ 12 h	local echo off
-#	ESC ( B		GO = ASCII
-#	ESC ) 0		G1 = Special Char & Line Drawing
-#	ESC [ ? 31 l	Set 7 bit controls
-#
-# Note: Most terminals, especially the 600 family use Reverse Video for
-# standout mode.  DEC also uses reverse video.  The VT100 uses bold in addition
-# Assume we should stay with reverse video for 70..  However, the 605V2 exits
-# standout mode with \E[m (all normal attributes).  The 730 entry simply
-# exits reverse video which would leave other current attributes intact.  It
-# was assumed the 730 entry to be more correct so rmso has changed.  The
-# 605V2 has no sequences to turn individual attributes off, thus its setting
-# and the rmso/smso settings from the 730.
-#
-# Note: For the same reason as above in rmso I changed exit under-score mode
-# to specifically turn off underscore, rather than return to all normal
-# attributes
-#
-# Note: The following pkey_xmit is taken from the 605V2 which contained the
-# capability as pfxl.  It was changed here to pfx since pfxl
-# will only compile successfully with Unix 4.0 tic.  Also note that pfx only
-# allows strings to be parameters and label values must be programmed as
-# constant strings.  Supposedly the pfxl of Version 4.0 allows both labels
-# and strings to be parameters.  The 605V2 pfx entry should be examined later
-# in this regard. For reference the 730 pfxl entry is shown here for comparison
-# 730 pfx entry:
-#     pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
-# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
-#
-# (for 4.0 tic)
-#     pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t   F%p1%1d           %;%p2%s,
-#
-# (for <4.0 tic)
-#     pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t   F%p1%1d           %;%p2%s,
-#
-# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
-#
-# Port1 Interface
-#
-# modular 10 pin Connector
-# Left side       Right side
-# Pin 1 2 3 4 5 6 7 8 9 10
-#
-#        Key (notch) at bottom
-#
-# Pin    1 DSR
-#        3 DCD
-#        4 DTR
-#        5 Sig Ground
-#        6 RD
-#        7 SD
-#        8 CTS
-#        9 RTS
-#        10 Frame Ground
-#
-# The manual is 189 pages and is loaded with details about the escape codes,
-# etc..... Available from AT&T CIC 800-432-6600...
-# ask for Document number 999-300-660..
-#
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-att700|AT&T 700 24x80 column display w/102key keyboard:\
-	:am:es:hs:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\
-	:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:\
-	:fs=\E8:ho=\E[H:i2=\E(B\E)0:im=\E[4h:\
-	:is=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017:\
-	:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:\
-	:k8=\EOj:k9=\ENo:kD=\E[P:kI=\E[@:kN=\E[U:kP=\E[V:kb=^H:\
-	:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:ll=\E[24H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m\017:mh=\E[2m:mr=\E[7m:nd=\E[C:\
-	:nw=\EE:rc=\E8:sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:\
-	:st=\EH:ta=^I:ts=\E7\E[99;%i%dx:ue=\E[24m:up=\E[A:\
-	:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
-	:vs=\E[?12;25h:
-
-# This entry was modified 3/13/90 by JWE.
-# fixes include additions of <enacs>, correcting :rp:, and modification
-# of <kHOM>.  (See comments below)
-# att730 has status line of 80 chars
-# These were commented out: :SF=\E[%p1%dS:, :SR=\E[%p1%dT:,
-# the <kf25> and up keys are used for shifted system Fkeys
-# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
-# currently the same as :kh: (unshifted HOME or \E[H).  On the 102, 102+1
-# and 122 key keyboards, the 730's translation is \E[2J.  For consistency
-# <kHOM> has been commented out.  The user can uncomment <kHOM> if using the
-# 102, 102+1, or 122 key keyboards
-#       kHOM=\E[2J,
-# (att730: I added <rmam>/<smam> based on the init string -- esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-att730|AT&T 730 windowing terminal:\
-	:am:da:db:es:hs:mi:ms:xn:xo:\
-	:co#80:it#8:li#60:lm#0:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\
-	:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:fs=\E8:\
-	:ho=\E[H:\
-	:i1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B:\
-	:i2=\E(B\E)0:im=\E[4h:is=\E[m\017:k1=\EOc:k2=\EOd:k3=\EOe:\
-	:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:k9=\ENo:kI=\E[@:\
-	:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m\017:mh=\E[2m:mr=\E[7m:nd=\E[C:\
-	:nw=\EE:rc=\E8:rs=\Ec\E[?3l:sc=\E7:se=\E[27m:sf=\ED:\
-	:so=\E[7m:sr=\EM:ta=^I:ts=\E7\E[;%i%dx:ue=\E[24m:up=\E[A:\
-	:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
-	:vs=\E[?12;25h:
-att730-41|730MTG-41|AT&T 730-41 windowing terminal Version:\
-	:li#41:tc=att730:
-att730-24|730MTG-24|AT&T 730-24 windowing terminal Version:\
-	:li#24:tc=att730:
-att730r|730MTGr|AT&T 730 rev video windowing terminal Version:\
-	:i1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B:\
-	:vb=\E[?5l\E[?5h:tc=att730:
-att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version:\
-	:li#41:tc=att730r:
-att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version:\
-	:li#24:tc=att730r:
-
-# The following represents the screen layout along with the associated
-# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
-# not appear on the screen but are shown to reference the bezel buttons.
-# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
-# position relative to the screen.
-#
-#
-#
-#      +----------------------------------------------------------------+
-#      |                                                                |
-# XXXX | kf0                                                       kf24 | XXXX
-#      |                                                                |
-#      |                                                                |
-# XXXX | kf1                                                       kf23 | XXXX
-#      |                                                                |
-#      |                                                                |
-# XXXX | kf2                                                       kf22 | XXXX
-#      |                                                                |
-#      |                                                                |
-# XXXX | kf3                                                       kf21 | XXXX
-#      |                                                                |
-#      |                                                                |
-# XXXX | kf4                                                       kf20 | XXXX
-#      |                                                                |
-#      |                                                                |
-# XXXX | kf5                                                       kf19 | XXXX
-#      |                                                                |
-#      |                                                                |
-# XXXX | kf6                                                       kf18 | XXXX
-#      |                                                                |
-#      |                                                                |
-# XXXX |                                                                | XXXX
-#      |                                                                |
-#      |                                                                |
-#      +----------------------------------------------------------------+
-#
-#          XXXX  XXXX  XXXX  XXXX  XXXX  XXXX  XXXX  XXXX  XXXX  XXXX
-#
-# Note: XXXX represents the screen buttons
-#                                                          CMD   REDRAW
-#
-#                                                          MAIL
-#
-# version 1 note:
-#	The character string sent by key 'kf26' may be user programmable
-#       to send either \E[16s, or \E[26s.
-#       The character string sent by key 'krfr' may be user programmable
-#       to send either \E[17s, or \E[27s.
-#
-# Depression of the "CMD" key sends    \E!    (kcmd)
-# Depression of the "MAIL" key sends   \E[26s (kf26)
-# "REDRAW" same as "REFRESH" (krfr)
-#
-# "kf" functions adds carriage return to output string if terminal is in
-# 'new line' mode.
-#
-# The following are functions not covered in the table above:
-#
-#       Set keyboard character (SKC): \EPn1;Pn2w
-#                       Pn1= 0 Back Space key
-#                       Pn1= 1 Break key
-#                       Pn2=   Program char (hex)
-#
-#       Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
-#                       Pn1=     Window number (1-39)
-#                       Pn2-Pn5= Y;X;Y;X coordinates
-#
-#       Screen Selection (SSL): \E[Pnu
-#                       Pn= Window number
-#
-#       Set Terminal Modes (SM): \E[Pnh
-#                       Pn= 3 Graphics mode
-#                       Pn= > Cursor blink
-#                       Pn= < Enter new line mode
-#                       Pn= = Enter reverse insert/replace mode
-#                       Pn= ? Enter no scroll mode
-#
-#       Reset Terminal Mode (RM): \E[Pnl
-#                       Pn= 3 Exit graphics mode
-#                       Pn= > Exit cursor blink
-#                       Pn= < Exit new line mode
-#                       Pn= = Exit reverse insert/replace mode
-#                       Pn= ? Exit no scroll mode
-#
-#       Screen Status Report (SSR): \E[Pnp
-#                       Pn= 0 Request current window number
-#                       Pn= 1 Request current window dimensions
-#
-#       Device Status Report (DSR): \E[6n    Request cursor position
-#
-#       Call Status Report (CSR): \E[Pnv
-#                       Pn= 0 Call failed
-#                       Pn= 1 Call successful
-#
-#       Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
-#                       Pn1= Button number to be loaded
-#                       Pn2= Character count of "string"
-#                       Pn3= Key mode being loaded:
-#                               0= Unshifted
-#                               1= Shifted
-#                               2= Control
-#                       String= Text string (15 chars max)
-#
-#       Screen Number Report (SNR): \E[Pnp
-#                       Pn= Screen number
-#
-#       Screen Dimension Report (SDR): \E[Pn1;Pn2r
-#                       Pn1= Number of rows available in window
-#                       Pn2= Number of columns available in window
-#
-#       Cursor Position Report (CPR): \E[Pn1;Pn2R
-#                       Pn1= "Y" Position of cursor
-#                       Pn2= "X" Position of cursor
-#
-#       Request Answer Back (RAB): \E[c
-#
-#       Answer Back Response (ABR): \E[?;*;30;VSV
-#                       *=  0 No printer available
-#                       *=  2 Printer available
-#                       V=  Software version number
-#                       SV= Software sub version number
-#	(printer-available field not documented in v1)
-#
-#       Screen Alignment Aid: \En
-#
-#       Bell (lower pitch): \E[x
-#
-#       Dial Phone Number: \EPdstring\
-#                       string= Phone number to be dialed
-#
-#       Set Phone Labels: \EPpstring\
-#                       string= Label for phone buttons
-#
-#       Set Clock: \EPchour;minute;second\
-#
-#       Position Clock: \EPsY;X\
-#                       Y= "Y" coordinate
-#                       X= "X" coordinate
-#
-#       Delete Clock: \Epr\
-#
-#       Programming The Function Buttons: \EPfPn;string\
-#                       Pn= Button number (00-06, 18-24)
-#                                         (kf00-kf06, kf18-kf24)
-#                       string= Text to sent on button depression
-#
-# The following in version 2 only:
-#
-#       Request For Local Directory Data: \EPp12;\
-#
-#       Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
-#
-#	Request for Local Directory Data in print format: \EPp13;\
-#
-#	Enable 'Prt on Line' mode: \022 (DC2)
-#
-#	Disable 'Prt on Line' mode: \024 (DC4)
-#
-
-# 05-Aug-86:
-# The following Terminfo entry describes functions which are supported by
-# the AT&T 5430/pt505 terminal software version 2 and later.
-att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal:\
-	:am:xo:\
-	:co#80:it#8:li#24:\
-	:&2=\E[27s:@4=\E!:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
-	:F8=\E[18s:F9=\E[19s:FA=\E[20s:FB=\E[21s:FC=\E[22s:\
-	:FD=\E[23s:FE=\E[24s:FG=\E[26s:LE=\E[%dD:RA=\E[11;1j:\
-	:RI=\E[%dC:SA=\E[11;0j:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:cb=\E[2K:cd=\E[0J:\
-	:ce=\E[0K:cl=\E[2J\E[H:cm=\E[%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
-	:do=\E[B:ei=\E[4l:ho=\E[H:\
-	:i1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l:\
-	:im=\E[4h:k0=\E[00s:k1=\E[01s:k2=\E[02s:k3=\E[03s:\
-	:k4=\E[04s:k5=\E[05s:k6=\E[06s:kb=^H:kd=\E[B:kl=\E[D:\
-	:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[m:\
-	:mr=\E[7m:nd=\E[C:pf=\E[4i:po=\E[5i:r1=\Ec:rc=\E8:sc=\E7:\
-	:se=\E[m:sf=^J:so=\E[1m:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:\
-	:ve=\E[>l:vs=\E[>h:
-
-# The following Terminfo entry describes functions which are supported by
-# the AT&T 5430/pt505 terminal software version 1.
-att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines:\
-	:li#24:\
-	:RA@:SA@:pf@:po@:rc@:sc@:tc=att505:
-tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines:\
-	:li#22:tc=att505:
-#
-#### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
-# This cut mark helps make life less painful for people running ncurses tic
-# on machines with relatively little RAM.  The file can be broken in half here
-# cleanly and compiled in sections -- no `use' references cross this cut
-# going forward.
-#
-
-#### Ampex (Dialogue)
-#
-# Yes, these are the same people who are better-known for making audio- and
-# videotape.  I'm told they are located in Redwood City, CA.
-#
-
-# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
-# (ampex80: some capabilities merged in from SCO's entry -- esr)
-ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80:\
-	:am:bs:bw:ul:\
-	:co#80:it#8:li#24:\
-	:al=\EE:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :\
-	:cr=^M:ct=\E3:dc=\EW:dl=\ER:do=^J:ei=:ic=\EQ:im=:is=\EA:le=^H:\
-	:nd=^L:se=\Ek:sf=^J:so=\Ej:st=\E1:ta=^I:ue=\Em:up=^K:us=\El:
-# This entry was from somebody anonymous, Tue Aug  9 20:11:37 1983, who wrote:
-ampex175|ampex d175:\
-	:am:\
-	:co#80:li#24:\
-	:al=\EE:bl=^G:cd=\Ey:ce=\Et:cl=\E+:cm=\E=%+ %+ :cr=^M:\
-	:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:is=\EX\EA\EF:\
-	:kA=\EE:kD=\EW:kI=\EQ:kL=\ER:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:\
-	:le=^H:ll=^^^K:nd=^L:se=\Ek:sf=^J:so=\Ej:te=\EF:ti=\EN:\
-	:ue=\Em:up=^K:us=\El:
-# No backspace key in the main QWERTY cluster. Fortunately, it has a
-# NEWLINE/PAGE key just above RETURN that sends a strange single-character
-# code.  Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
-# mode), this key can be used as the erase key; I find I like this. Because
-# some people and some systems may not, there is another termcap ("ampex175")
-# that suppresses this little eccentricity by omitting the relevant capability.
-ampex175-b|ampex d175 using left arrow for erase:\
-	:kb=^_:tc=ampex175:
-# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
-# (ampex210: removed obsolete ":kn#10:" -- esr)
-ampex210|a210|ampex a210:\
-	:am:bs:hs:xn:\
-	:co#80:it#8:li#24:sg#1:\
-	:al=\EE:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :dc=\EW:\
-	:dl=\ER:ei=:fs=\E.2:ho=^^:ic=\EQ:if=/usr/share/tabset/std:\
-	:im=:is=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En:\
-	:k0=^A0\r:k1=^A1\r:k2=^A2\r:k3=^A3\r:k4=^A4\r:k5=^A5\r:\
-	:k6=^A6\r:k7=^A7\r:k8=^A8\r:k9=^A9\r:kd=^V:kh=^^:kl=^H:\
-	:kr=^L:ku=^K:le=^H:mk@:nd=^L:ta=^I:ts=\E.0\Eg\E}\Ef:up=^K:\
-	:vb=\EU\EX\EU\EX\EU\EX\EU\EX:tc=adm+sgr:
-# (ampex219: I added <rmam>/<smam> based on the init string, added :vs:
-# from ampex219w, added :ve:=\E[?3l, irresistibly suggested by :vs:,
-# and moved the padding to be *after* the caps -- esr)
-ampex219|ampex-219|amp219|Ampex with Automargins:\
-	:hs:xn:\
-	:co#80:it#8:li#24:\
-	:RA=\E[?7l:SA=\E[?7h:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=%i\E[%2;%2r:\
-	:do=\E[B:ho=\E[H:\
-	:is=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:k0=\E[21~:\
-	:k1=\E[7~:k2=\E[8~:k3=\E[9~:k4=\E[10~:k5=\E[11~:k6=\E[17~:\
-	:k7=\E[18~:k8=\E[19~:k9=\E[20~:kd=\E[B:ke=\E>:kh=\E[H:\
-	:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:\
-	:me=\E[m:mh=\E[1m:mr=\E[7m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:\
-	:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?3l:vs=\E[?3h:
-ampex219w|ampex-219w|amp219w|Ampex 132 cols:\
-	:co#132:li#24:\
-	:bl=^G:cr=^M:do=^J:is=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:sf=^J:tc=ampex219:
-# (ampex232: removed :if=/usr/share/tabset/ampex:, no file and no :st: --esr)
-ampex232|ampex-232|Ampex Model 232:\
-	:am:\
-	:co#80:li#24:sg#1:\
-	:al=5*\EE:bt=\EI:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :dc=\EW:\
-	:dl=5*\ER:do=^V:ei=:ic=\EQ:im=:is=\Eg\El:k0=^A@\r:k1=^AA\r:\
-	:k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:\
-	:k8=^AH\r:k9=^AI\r:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\
-	:mk@:nd=^L:ta=^I:up=^K:vb=\Eb\Ed:ve=\E.4:vi=\E.0:tc=adm+sgr:
-# (ampex: removed :if=/usr/share/tabset/amp-132:, no file and no :st: -- esr)
-ampex232w|Ampex Model 232 / 132 columns:\
-	:co#132:li#24:\
-	:is=\E\034Eg\El:tc=ampex232:
-
-#### Ann Arbor (aa)
-#
-# Ann Arbor made dream terminals for hackers -- large screen sizes and huge
-# numbers of function keys.  At least some used monitors in portrait mode,
-# allowing up to 76-character screen heights!  They were reachable at:
-#
-#	Ann Arbor Terminals
-#	6175 Jackson Road
-#	Ann Arbor, MI 48103
-#	(313)-663-8000
-#
-# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
-# can't be found on the Web; I fear they're long dead.  R.I.P.
-#
-
-
-# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
-# Highly modified 6/22 by Mike O'Brien.
-# split out into several for the various screen sizes by dave-yost@rand
-# Modifications made 3/82 by Mark Horton
-# Modified by Tom Quarles at UCB for greater efficiency and more diversity
-# status line moved to top of screen, :vb: removed 5/82
-# Some unknown person at SCO then hacked the init strings to make them more
-# efficient.
-#
-# assumes the following setup:
-#   A menu: 0000 1010  0001 0000
-#   B menu: 9600  0100 1000  0000 0000  1000 0000  17  19
-#   C menu: 56   66   0    0    9600  0110 1100
-#   D menu: 0110 1001   1   0
-#
-#	Briefly, the settings are for the following modes:
-#	   (values are for bit set/clear with * indicating our preference
-#	    and the value used to test these termcaps)
-#	Note that many of these settings are irrelevent to the terminfo
-#	and are just set to the default mode of the terminal as shipped
-#	by the factory.
-#
-# A menu: 0000 1010  0001 0000
-#	Block/underline cursor*
-#	blinking/nonblinking cursor*
-#	key click/no key click*
-#	bell/no bell at column 72*
-#
-#	key pad is cursor control*/key pad is numeric
-#	return and line feed/return for :cr: key *
-#	repeat after .5 sec*/no repeat
-#	repeat at 25/15 chars per sec. *
-#
-#	hold data until pause pressed/process data unless pause pressed*
-#	slow scroll/no slow scroll*
-#	Hold in area/don't hold in area*
-#	functions keys have default*/function keys disabled on powerup
-#
-#	show/don't show position of cursor during page transmit*
-#	unused
-#	unused
-#	unused
-#
-# B menu: 9600  0100 1000  0000 0000  1000 0000  17  19
-#	Baud rate (9600*)
-#
-#	2 bits of parity - 00=odd,01=even*,10=space,11=mark
-#	1 stop bit*/2 stop bits
-#	parity error detection off*/on
-#
-#	keyboard local/on line*
-#	half/full duplex*
-#	disable/do not disable keyboard after data transmission*
-#
-#	transmit entire page/stop transmission at cursor*
-#	transfer/do not transfer protected characters*
-#	transmit all characters/transmit only selected characters*
-#	transmit all selected areas/transmit only 1 selected area*
-#
-#	transmit/do not transmit line separators to host*
-#	transmit/do not transmit page tab stops tabs to host*
-#	transmit/do not transmit column tab stop tabs to host*
-#	transmit/do not transmit graphics control (underline,inverse..)*
-#
-#	enable*/disable auto XON/XOFF control
-#	require/do not require receipt of a DC1 from host after each LF*
-#	pause key acts as a meta key/pause key is pause*
-#	unused
-#
-#	unused
-#	unused
-#	unused
-#	unused
-#
-#	XON character (17*)
-#	XOFF character (19*)
-#
-# C menu: 56   66   0    0    9600  0110 1100
-#	number of lines to print data on (printer) (56*)
-#
-#	number of lines on a sheet of paper (printer) (66*)
-#
-#	left margin (printer) (0*)
-#
-#	number of pad chars on new line to printer (0*)
-#
-#	printer baud rate (9600*)
-#
-#	printer parity: 00=odd,01=even*,10=space,11=mark
-#	printer stop bits: 2*/1
-#	print/do not print guarded areas*
-#
-#	new line is: 01=LF,10=CR,11=CRLF*
-#	unused
-#	unused
-#
-# D menu: 0110 1001   1   0
-#	LF is newline/LF is down one line, same column*
-#	wrap to preceding line if move left from col 1*/don't wrap
-#	wrap to next line if move right from col 80*/don't wrap
-#	backspace is/is not destructive*
-#
-#	display*/ignore DEL character
-#	display will not/will scroll*
-#	page/column tab stops*
-#	erase everything*/erase unprotected only
-#
-#	editing extent: 0=display,1=line*,2=field,3=area
-#
-#	unused
-#
-
-annarbor4080|aa4080|ann arbor 4080:\
-	:am:bs:\
-	:co#80:li#40:\
-	:bl=^G:cl=\014:\
-	:..cm=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c:\
-	:cr=^M:ct=^^P^P:do=^J:ho=^K:kb=^^:kd=^J:kh=^K:kl=^H:kr=^_:\
-	:ku=^N:le=^H:nd=^_:sf=^J:st=^]^P1:ta=^I:up=^N:
-
-# Strange Ann Arbor terminal from BRL
-aas1901|Ann Arbor K4080 w/S1901 mod:\
-	:am:\
-	:co#80:li#40:\
-	:bl=^G:cl=^L:cr=^M:do=^J:ho=^K:kb=^H:kd=^J:kl=^H:le=^H:\
-	:ll=^O\0c:nd=^_:nw=^M^J:sf=^J:ta=^I:up=^N:
-
-# If you're using the GNU termcap library, add
-#	:cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
-# to these capabilities.  This is the nonstandard GNU termcap scrolling
-# capability, arguments are:
-#   1. Total number of lines on the screen.
-#   2. Number of lines above desired scroll region.
-#   3. Number of lines below (outside of) desired scroll region.
-#   4. Total number of lines on the screen, the same as the first parameter.
-# The generic Ann Arbor entry is the only one that uses this.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly):\
-	:am:bs:km:mi:xo:\
-	:co#80:it#8:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:\
-	:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:ct=\E[2g:dc=\E[P:dl=\E[M:do=^K:ei=:ho=\E[H:\
-	:i1=\E[m\E7\E[H\E9\E8:i2=\E[1Q\E[>20;30l\EP`+x~M\E\\:\
-	:ic=\E[@:im=:k1=\EOA:k2=\EOB:k3=\EOC:k4=\EOD:k5=\EOE:\
-	:k6=\EOF:k7=\EOG:k8=\EOH:k9=\EOI:kD=\E[P:kI=\E[@:kb=^H:\
-	:kd=\E[B:\
-	:ke=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\:\
-	:kh=\E[H:kl=\E[D:kr=\E[C:\
-	:ks=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\:\
-	:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mm=\E[>52h:\
-	:mo=\E[>52l:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=^K:\
-	:so=\E[7m:st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
-
-aaa+rv|ann arbor ambassador in reverse video:\
-	:i1=\E[7m\E7\E[H\E9\E8:mb=\E[5;7m:md=\E[1;7m:\
-	:me=\E[7m\016:mk=\E[7;8m:mr=\E[m:r1=\E[H\E[7m\E[J:\
-	:..sa=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m:\
-	:se=\E[7m:so=\E[m:ue=\E[7m:us=\E[4;7m:
-# Ambassador with the DEC option, for partial vt100 compatibility.
-aaa+dec|ann arbor ambassador in dec vt100 mode:\
-	:ac=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}:\
-	:ae=^N:as=^O:cs=\E[%i%d;%dr:eA=\E(0:\
-	:..sa=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;:
-aaa-18|ann arbor ambassador/18 lines:\
-	:li#18:\
-	:is=\E7\E[60;0;0;18p\E8:te=\E[60;0;0;18p\E[60;1H\E[K:\
-	:ti=\E[18;0;0;18p:tc=aaa+unk:
-aaa-18-rv|ann arbor ambassador/18 lines+reverse video:\
-	:tc=aaa+rv:tc=aaa-18:
-aaa-20|ann arbor ambassador/20 lines:\
-	:li#20:\
-	:is=\E7\E[60;0;0;20p\E8:te=\E[60;0;0;20p\E[60;1H\E[K:\
-	:ti=\E[20;0;0;20p:tc=aaa+unk:
-aaa-22|ann arbor ambassador/22 lines:\
-	:li#22:\
-	:is=\E7\E[60;0;0;22p\E8:te=\E[60;0;0;22p\E[60;1H\E[K:\
-	:ti=\E[22;0;0;22p:tc=aaa+unk:
-aaa-24|ann arbor ambassador/24 lines:\
-	:li#24:\
-	:is=\E7\E[60;0;0;24p\E8:te=\E[60;0;0;24p\E[60;1H\E[K:\
-	:ti=\E[24;0;0;24p:tc=aaa+unk:
-aaa-24-rv|ann arbor ambassador/24 lines+reverse video:\
-	:tc=aaa+rv:tc=aaa-24:
-aaa-26|ann arbor ambassador/26 lines:\
-	:li#26:\
-	:is=\E7\E[60;0;0;26p\E8:te=\E[60;0;0;26p\E[26;1H\E[K:\
-	:ti=\E[H\E[J\E[26;0;0;26p:tc=aaa+unk:
-aaa-28|ann arbor ambassador/28 lines:\
-	:li#28:\
-	:is=\E7\E[60;0;0;28p\E8:te=\E[60;0;0;28p\E[28;1H\E[K:\
-	:ti=\E[H\E[J\E[28;0;0;28p:tc=aaa+unk:
-aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status:\
-	:es:hs:\
-	:li#29:\
-	:ds=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K:\
-	:fs=\E[>51l:is=\r\n\E[A\E7\E[60;1;0;30p\E8:\
-	:te=\E[60;1;0;30p\E[29;1H\E[K:\
-	:ti=\E[H\E[J\E[30;1;0;30p\E[30;1H\E[K:\
-	:ts=\E[>51h\E[1;%dH\E[2K:tc=aaa+unk:
-aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video:\
-	:tc=aaa+rv:tc=aaa-30-s:
-aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context:\
-	:te=\E[60;1;0;30p\E[59;1H\E[K:\
-	:ti=\E[30;1H\E[K\E[30;1;0;30p:tc=aaa-30-s:
-aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video:\
-	:te=\E[60;1;0;30p\E[59;1H\E[K:\
-	:ti=\E[30;1H\E[K\E[30;1;0;30p:tc=aaa-30-s-rv:
-aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines:\
-	:li#30:\
-	:is=\E7\E[60;0;0;30p\E8:te=\E[60;0;0;30p\E[30;1H\E[K:\
-	:ti=\E[H\E[J\E[30;0;0;30p:tc=aaa+unk:
-aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video:\
-	:tc=aaa+rv:tc=aaa-30:
-aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context:\
-	:te=\E[60;0;0;30p\E[60;1H\E[K:ti=\E[30;0;0;30p:\
-	:tc=aaa-30:
-aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context:\
-	:te=\E[60;0;0;30p\E[60;1H\E[K:ti=\E[30;0;0;30p:\
-	:tc=aaa+rv:tc=aaa-30:
-aaa-36|ann arbor ambassador/36 lines:\
-	:li#36:\
-	:is=\E7\E[60;0;0;36p\E8:te=\E[60;0;0;36p\E[36;1H\E[K:\
-	:ti=\E[H\E[J\E[36;0;0;36p:tc=aaa+unk:
-aaa-36-rv|ann arbor ambassador/36 lines+reverse video:\
-	:tc=aaa+rv:tc=aaa-36:
-aaa-40|ann arbor ambassador/40 lines:\
-	:li#40:\
-	:is=\E7\E[60;0;0;40p\E8:te=\E[60;0;0;40p\E[40;1H\E[K:\
-	:ti=\E[H\E[J\E[40;0;0;40p:tc=aaa+unk:
-aaa-40-rv|ann arbor ambassador/40 lines+reverse video:\
-	:tc=aaa+rv:tc=aaa-40:
-aaa-48|ann arbor ambassador/48 lines:\
-	:li#48:\
-	:is=\E7\E[60;0;0;48p\E8:te=\E[60;0;0;48p\E[48;1H\E[K:\
-	:ti=\E[H\E[J\E[48;0;0;48p:tc=aaa+unk:
-aaa-48-rv|ann arbor ambassador/48 lines+reverse video:\
-	:tc=aaa+rv:tc=aaa-48:
-aaa-60-s|ann arbor ambassador/59 lines+status:\
-	:es:hs:\
-	:li#59:\
-	:ds=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K:\
-	:fs=\E[>51l:is=\r\n\E[A\E7\E[60;1;0;60p\E8:\
-	:ts=\E[>51h\E[1;%dH\E[2K:tc=aaa+unk:
-aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video:\
-	:tc=aaa+rv:tc=aaa-60-s:
-aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video:\
-	:tc=aaa+dec:tc=aaa+rv:tc=aaa-60-s:
-aaa-60|ann arbor ambassador/60 lines:\
-	:li#60:\
-	:is=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8:tc=aaa+unk:
-aaa-60-rv|ann arbor ambassador/60 lines+reverse video:\
-	:tc=aaa+rv:tc=aaa-60:
-aaa-db|ann arbor ambassador 30/destructive backspace:\
-	:bs@:\
-	:i2=\E[1Q\E[m\E[>20l\E[>30h:le=\E[D:tc=aaa-30:
-
-guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols:\
-	:li#33:\
-	:i2=\E[>59l:is=\E7\E[255;0;0;33;80;80p\E8\E[J:\
-	:te=\E[255p\E[255;1H\E[K:ti=\E[33p:vb=\E[>59h\E[>59l:\
-	:tc=aaa+unk:
-guru+rv|guru changes for reverse video:\
-	:i2=\E[>59h:vb=\E[>59l\E[>59h:
-guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video:\
-	:tc=guru+rv:tc=guru-33:
-guru+s|guru status line:\
-	:es:hs:\
-	:ds=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K:fs=\E[>51l:\
-	:te=\E[255;1p\E[255;1H\E[K:ti=:ts=\E[>51h\E[1;%dH\E[2K:
-guru-nctxt|guru with no saved context:\
-	:ti=\E[H\E[J\E[33p\E[255;1H\E[K:tc=guru:
-guru-s|guru-33-s|ann arbor guru/33 lines+status:\
-	:li#32:\
-	:is=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J:\
-	:ti=\E[33;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk:
-guru-24|ann arbor guru 24 lines:\
-	:co#80:li#24:\
-	:is=\E7\E[255;0;0;24;80;80p\E8\E[J:ti=\E[24p:\
-	:tc=guru+unk:
-guru-44|ann arbor guru 44 lines:\
-	:co#97:li#44:\
-	:is=\E7\E[255;0;0;44;97;100p\E8\E[J:ti=\E[44p:\
-	:tc=guru+unk:
-guru-44-s|ann arbor guru/44 lines+status:\
-	:li#43:\
-	:is=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J:\
-	:ti=\E[44;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk:
-guru-76|guru with 76 lines by 89 cols:\
-	:co#89:li#76:\
-	:is=\E7\E[255;0;0;76;89;100p\E8\E[J:ti=\E[76p:\
-	:tc=guru+unk:
-guru-76-s|ann arbor guru/76 lines+status:\
-	:co#89:li#75:\
-	:is=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J:\
-	:ti=\E[76;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk:
-guru-76-lp|guru-lp|guru with page bigger than line printer:\
-	:co#134:li#76:\
-	:is=\E7\E[255;0;0;76;134;134p\E8\E[J:ti=\E[76p:\
-	:tc=guru+unk:
-guru-76-w|guru 76 lines by 178 cols:\
-	:co#178:li#76:\
-	:is=\E7\E[255;0;0;76;178;178p\E8\E[J:ti=\E[76p:\
-	:tc=guru+unk:
-guru-76-w-s|ann arbor guru/76 lines+status+wide:\
-	:co#178:li#75:\
-	:is=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J:\
-	:ti=\E[76;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk:
-guru-76-wm|guru 76 lines by 178 cols with 255 cols memory:\
-	:co#178:li#76:\
-	:is=\E7\E[255;0;0;76;178;255p\E8\E[J:ti=\E[76p:\
-	:tc=guru+unk:
-aaa-rv-unk|ann arbor unknown type:\
-	:Nl#0:lh#0:lw#0:\
-	:ho=\E[H:i1=\E[7m\E7\E[H\E9\E8:mb=\E[5;7m:md=\E[1;7m:\
-	:me=\E[7m:mk=\E[7;8m:mr=\E[m:r1=\E[H\E[7m\E[J:\
-	:..sa=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m:\
-	:se=\E[7m:so=\E[m:ue=\E[7m:us=\E[4;7m:
-
-#### Applied Digital Data Systems (adds)
-#
-# ADDS itself is long gone.  ADDS was bought by NCR, and the same group made
-# ADDS and NCR terminals.  When AT&T and NCR merged, the engineering for
-# terminals was merged again.  Then AT&T sold the terminal business to
-# SunRiver, which later changed its  name to Boundless Technologies.  The
-# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
-# as of early 1995) are at:
-#
-#	Boundless Technologies
-#	100 Marcus Boulevard
-#	Hauppauge, NY 11788-3762
-#	Vox: (800)-231-5445
-#	Fax: (516)-342-7378
-#	Web: http://boundless.com
-#
-# Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
-# In 1995 Boundless acquired DEC's terminals business.
-#
-
-# Regent: lowest common denominator, works on all regents.
-# (regent: renamed ":bc:" to ":le:" -- esr)
-regent|Adds Regent Series:\
-	:am:bs:\
-	:co#80:li#24:\
-	:bl=^G:cl=^L:cr=^M:do=^J:ho=\EY\s\s:le=^U:ll=^A:nd=^F:sf=^J:\
-	:up=^Z:
-# Regent 100 has a bug where if computer sends escape when user is holding
-# down shift key it gets confused, so we avoid escape.
-regent100|Adds Regent 100:\
-	:sg#1:ug#1:\
-	:bl=^G:cm=\013%+ \020%B%.:k0=^B1\r:k1=^B2\r:k2=^B3\r:\
-	:k3=^B4\r:k4=^B5\r:k5=^B6\r:k6=^B7\r:k7=^B8\r:l0=F1:l1=F2:\
-	:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:me=\E0@:se=\E0@:so=\E0P:\
-	:ue=\E0@:us=\E0`:tc=regent:
-regent20|Adds Regent 20:\
-	:bl=^G:cd=\Ek:ce=\EK:cm=\EY%+ %+ :tc=regent:
-regent25|Adds Regent 25:\
-	:bl=^G:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:tc=regent20:
-regent40|Adds Regent 40:\
-	:sg#1:ug#1:\
-	:al=\EM:bl=^G:dl=\El:k0=^B1\r:k1=^B2\r:k2=^B3\r:k3=^B4\r:\
-	:k4=^B5\r:k5=^B6\r:k6=^B7\r:k7=^B8\r:l0=F1:l1=F2:l2=F3:\
-	:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:me=\E0@:se=\E0@:so=\E0P:\
-	:ue=\E0@:us=\E0`:tc=regent25:
-regent40+|Adds Regent 40+:\
-	:is=\EB:tc=regent40:
-regent60|regent200|Adds Regent 60:\
-	:dc=\EE:ei=\EF:im=\EF:is=\EV\EB:kD=\EE:kI=\EF:kM=\EF:\
-	:se=\ER\E0@\EV:so=\ER\E0P\EV:tc=regent40+:
-# From: <edward@onyx.berkeley.edu> Thu Jul  9 09:27:33 1981
-# (viewpoint: added :kr:, function key, and :dl: capabilities -- esr)
-viewpoint|addsviewpoint|adds viewpoint:\
-	:am:bs:\
-	:co#80:li#24:\
-	:bl=^G:cd=\Ek:ce=\EK:cl=^L:cm=\EY%+ %+ :cr=^M:dl=\El:do=^J:\
-	:is=\017\E0`:k0=^B1:k2=^B2:k3=^B!:k4=^B":k5=^B#:kd=^J:kh=^A:\
-	:kl=^U:kr=^F:ku=^Z:le=^H:ll=^A:me=^O:nd=^F:se=^O:sf=^J:so=^N:\
-	:ue=^O:up=^Z:us=^N:ve=\017\E0`:vs=\017\E0P:
-# Some viewpoints have bad ROMs that foo up on ^O
-screwpoint|adds viewpoint with ^O bug:\
-	:se@:so@:ue@:us@:vs@:tc=viewpoint:
-
-# From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
-# The :vi:/:ve:/:sa:/:me: strings were added by ESR from specs.
-# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
-# underline=01100000, rev=01010000, blink=01000010,dim=01000001,
-# invis=01000100 and %c is the logical or of desired attributes.
-# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
-vp3a+|viewpoint3a+|adds viewpoint 3a+:\
-	:am:bw:\
-	:co#80:it#8:li#24:\
-	:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:kb=^H:\
-	:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:me=\E(:nd=^L:nw=^M^J:\
-	:..sa=\E0%{64}%?%p1%tQ%|%;%?%p2%t%{96}%|%;%?%p3%tP%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%?%p7%tD%|%;%c\E):\
-	:se=\E(:sf=^J:so=\E0Q\E):ta=^I:up=^K:ve=^X:vi=^W:
-vp60|viewpoint60|addsvp60|adds viewpoint60:\
-	:tc=regent40:
-#
-# adds viewpoint 90 - from cornell
-# Note:  emacs sends ei occasionally to insure the terminal is out of
-#        insert mode. This unfortunately puts the viewpoint90 IN insert
-#        mode.  A hack to get around this is :ic=\EF\s\EF^U:.  (Also,
-#   -    :ei=:im=: must be present in the termcap translation.)
-#   -    :xs: indicates glitch that attributes stick to location
-#   -    :ms: means it's safe to move in standout mode
-#   -    :cl=\EG\Ek:: clears screen and visual attributes without affecting
-#               the status line
-# Function key and label capabilities merged in from SCO.
-vp90|viewpoint90|adds viewpoint 90:\
-	:bs:bw:ms:xs:\
-	:co#80:li#24:\
-	:cd=\Ek:ce=\EK:cl=\EG\Ek:cm=\EY%+ %+ :dc=\EE:dl=\El:do=^J:\
-	:ei=:ho=\EY\s\s:ic=\EF \EF\025:im=:k0=^B1\r:k1=^B2\r:\
-	:k2=^B3\r:k3=^B4\r:k4=^B5\r:k5=^B6\r:k6=^B7\r:k7=^B8\r:\
-	:k8=^B9\r:k9=^B\:\r:k;=^B;\r:kb=^H:kd=^J:kh=^A:kl=^U:kr=^F:\
-	:ku=^Z:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:l8=F9:\
-	:l9=F10:la=F11:le=^H:ll=^A:me=\ER\E0@\EV:nd=^F:\
-	:se=\ER\E0@\EV:sf=^J:so=\ER\E0Q\EV:ta=^I:ue=\ER\E0@\EV:\
-	:up=^Z:us=\ER\E0`\EV:
-# Note: if return acts weird on a980, check internal switch #2
-# on the top chip on the CONTROL pc board.
-adds980|a980|adds consul 980:\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\E\016:bl=^G:cl=\014\013@:cm=\013%+@\E\005%2:cr=^M:\
-	:dl=\E\017:do=^J:k0=\E0:k1=\E1:k2=\E2:k3=\E3:k4=\E4:k5=\E5:\
-	:k6=\E6:k7=\E7:k8=\E8:k9=\E9:le=^H:me=^O:nd=\E^E01:se=^O:\
-	:sf=^J:so=^Y^^^N:
-
-#### C. Itoh Electronics
-#
-# As of 1995 these people no longer make terminals (they're still in the
-# printer business).  Their terminals were all clones of the DEC VT series.
-# They're located in Orange County, CA.
-#
-
-# CIT 80  - vt-52 emulator, the termcap has been modified to remove
-#           the delay times and do an auto tab set rather than the indirect
-#           file used in vt100.
-cit80|cit-80|citoh 80:\
-	:am:bs:\
-	:co#80:li#24:\
-	:cd=\EJ:ce=\EK:cl=\E[H\EJ:cm=\E[%i%2;%2H:cr=^M:ff=^L:\
-	:is=\E>:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
-	:ku=\EOA:le=^H:nd=\E[C:sf=^J:up=\E[A:
-# From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
-# (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
-cit101|citc|C.itoh fast vt100:\
-	:am:bs:xn:\
-	:co#80:li#24:\
-	:RA=\E[?7l:SA=\E[?7h:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:ei=:ic=\E[@:\
-	:im=:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g:\
-	:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
-	:ku=\EOA:le=^H:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:ue=\E[m:\
-	:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[V\E8:vs=\E7\E[U:
-# CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
-# The following termcap entry was created from the Callan cd100 entry.  The
-# last two lines (with the capabilities in caps) are used by RM-cobol to allow
-# full selection of combinations of reverse video, underline, and blink.
-# (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
-# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
-# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
-cit101e|C. Itoh CIT-101e:\
-	:am:bs:mi:ms:pt:\
-	:co#80:it#8:li#24:\
-	:ac=:ae=^O:al=\E[L:as=^N:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%2;%2H:cs=\E[%i%2;%2r:dc=\E[P:dl=\E[M:do=\E[B:\
-	:ei=\E[4l:if=/usr/share/tabset/vt100:im=\E[4h:k0=\EOT:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOm:k6=\EOl:k7=\EOM:\
-	:k8=\EOn:kd=\E[B:ke=\E>:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:\
-	:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:so=\E[7m:sr=\EM:ue=\E[m:\
-	:up=\E[A:us=\E[4m:ve=:vs=\E[?1l\E[?4l\E[?7h:
-# From: David S. Lawyer, June 1997:
-# The CIT 101-e was made in Japan in 1983-4 and imported by CIE
-# Terminals in Irvine, CA.  It was part of CITOH Electronics.  In the
-# late 1980's CIT Terminals went out of business.
-# There is no need to use the initialization string is=... (by invoking
-# tset or setterm etc.) provided that the terminal has been manually set
-# up (and the setup saved with ^S) to be compatible with this termcap.  To be
-# compatible it should be in ANSI mode (not VT52).   A set-up that
-# works is to set all the manually setable stuff to factory defaults
-# by pressing ^D in set-up mode.  Then increse the brighness with the
-# up-arrow key since the factory default will likely be dim on an old
-# terminal.  Then change any options you want (provided that they are
-# compatible with the termcap).  For my terminal I set: Screen
-# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
-# on.  I also set up mine for parity (but you may not need it).  Then
-# save the setup with ^S.
-# (cit101e-rv: added empty :te: to suppress a tic warning. --esr)
-cit101e-rv|Citoh CIT-101e (sets reverse video):\
-	:am:eo:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
-	:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%dG:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:ic=\E[@:\
-	:im=\E[4h:\
-	:is=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=\177:kd=\E[B:kl=\E[D:\
-	:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:\
-	:nd=\E[C:nl=\EM:nw=\EE:r1=\Ec\E[?7h\E[>5g:rc=\E8:sc=\E7:\
-	:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=:\
-	:ti=\E[>5g\E[?7h\E[?5h:u6=\E[%i%d;%dR:u7=\E[6n:\
-	:u8=\E[?6c:u9=\E[c:ue=\E[m:up=\E[A:us=\E[4m:\
-	:vb=200\E[?5l\E[?5h:ve=\E[0;3;4v:vi=\E[1v:vs=\E[3;5v:
-cit101e-n|CIT-101e w/o am:\
-	:am@:\
-	:kb=^H:kd=^J:kl=^H:vs=\E[?1l\E[?4l\E[?7l:tc=cit101e:
-cit101e-132|CIT-101e with 132 cols:\
-	:co#132:\
-	:kb=^H:kd=^J:kl=^H:tc=cit101e:
-cit101e-n132|CIT-101e with 132 cols w/o am:\
-	:am@:\
-	:co#132:\
-	:kb=^H:kd=^J:kl=^H:vs=\E[?1l\E[?4l\E[?7l:tc=cit101e:
-# CIE Terminals CIT-500 from BRL
-# The following SET-UP modes are assumed for normal operation:
-#	GENERATE_XON/XOFF:YES	DUPLEX:FULL		NEWLINE:OFF
-#	AUTOWRAP:ON		MODE:ANSI		SCREEN_LENGTH:64_LINES
-#	DSPLY_CNTRL_CODES?NO	PAGE_WIDTH:80		EDIT_MODE:OFF
-# Other SET-UP modes may be set for operator convenience or communication
-# requirements.
-# Hardware tabs are assumed to be set every 8 columns; they can be set up
-# by the "reset", "tset", or "tabs" utilities.  No delays are specified; use
-# "stty ixon -ixany" to enable DC3/DC1 flow control!
-# (cit500: I added <rmam>/<smam> based on the init string -- esr)
-cit500|CIE Terminals CIT-500:\
-	:bs:mi:ms:pt:xo:\
-	:co#80:it#8:kn#10:li#64:vt#3:\
-	:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:\
-	:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:ac=:ae=^O:al=\E[L:as=^N:\
-	:bl=^G:bt=\E[Z:cd=\EJ:ce=\EK:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
-	:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
-	:ei=\E[4l:ho=\E[H:im=\E[4h:is=\E<\E)0:k0=\EOP:k1=\EOQ:\
-	:k2=\EOR:k3=\EOS:k4=\EOU:k5=\EOV:k6=\EOW:k7=\EOX:k8=\EOY:\
-	:k9=\EOZ:kA=\E[L:kB=\E[Z:kD=\E[P:kE=\EK:kI=\E[4h:kL=\E[M:\
-	:kM=\E[4l:kS=\EJ:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\E[H:\
-	:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=PF1:l1=PF2:l2=PF3:\
-	:l3=PF4:l4=F15:l5=F16:l6=F17:l7=F18:l8=F19:l9=F20:le=^H:\
-	:ll=\E[64H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
-	:nw=\EE:\
-	:r1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>:\
-	:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:ue=\E[m:up=\EM:us=\E[4m:
-
-# C. Itoh printers begin here
-citoh|ci8510|8510|c.itoh 8510a:\
-	:co#80:it#8:\
-	:is=\E(009,017,025,033,041,049,057,065,073.:le@:md=\E!:\
-	:me=\E"\EY:rp=\ER%r%03%.:sr=\Er:ue=\EY:us=\EX:tc=lpr:
-citoh-pica|citoh in pica:\
-	:i1=\EN:tc=citoh:
-citoh-elite|citoh in elite:\
-	:co#96:\
-	:i1=\EE:\
-	:is=\E(009,017,025,033,041,049,057,065,073,081,089.:\
-	:tc=citoh:
-citoh-comp|citoh in compressed:\
-	:co#136:\
-	:i1=\EQ:\
-	:is=\E(009,017,025,033,041,049,057,065,073,081,089,097,105,113,121,129.:\
-	:tc=citoh:
-# citoh has infinite cols because we don't want lp ever inserting \n\t**.
-citoh-prop|citoh-ps|ips|citoh in proportional spacing mode:\
-	:co#32767:\
-	:i1=\EP:tc=citoh:
-citoh-6lpi|citoh in 6 lines per inch mode:\
-	:i2=\EA:tc=citoh:
-citoh-8lpi|citoh in 8 lines per inch mode:\
-	:li#88:\
-	:i2=\EB:tc=citoh:
-
-#### Control Data (cdc)
-#
-
-cdc456|cdc 456 terminal:\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\EL:bl=^G:cd=^X:ce=^V:cl=^Y^X:cm=\E1%+ %+ :cr=^M:dl=\EJ:\
-	:do=^J:ho=^Y:le=^H:nd=^L:sf=^J:up=^Z:
-
-# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
-cdc721|CDC Viking:\
-	:am:bs:\
-	:co#80:li#24:\
-	:ce=^K:cl=^L:cm=\002%r%+ %+ :ho=^Y:kd=^J:kh=^Y:kl=^H:kr=^I:\
-	:ku=^W:nd=^X:up=^W:
-cdc721ll|CDC Vikingll:\
-	:am:bs:\
-	:co#132:li#24:\
-	:ce=^K:cl=^L:cm=\002%r%+ %+ :ho=^Y:kd=^J:kh=^Y:kl=^H:kr=^I:\
-	:ku=^W:nd=^X:up=^W:
-# (cdc752: the BRL entry had :ll=\E1  ^Z: commented out
-cdc752|CDC 752:\
-	:am:bs:bw:xs:\
-	:co#80:li#24:\
-	:bl=^G:ce=^V:cl=\030\E1\s\s:cm=\E1%r%+ %+ :cr=^M:do=^J:\
-	:ho=\E1\s\s:le=^H:ll=^Y:nd=^U:r1=\E1  \030\002\003\017:\
-	:sf=^J:up=^Z:
-# CDC 756
-# The following switch/key settings are assumed for normal operation:
-#	96 chars	SCROLL		FULL duplex	not BLOCK
-# Other switches may be set according to communication requirements.
-# Insert/delete-character cannot be used, as the whole display is affected.
-# "so" & "se" are commented out until jove handles "sg" correctly.
-cdc756|CDC 756:\
-	:am:bs:bw:\
-	:co#80:kn#10:li#24:\
-	:al=6*\EL:bl=^G:cd=^X:ce=^V:cl=^Y^X:cm=\E1%r%+ %+ :cr=^M:\
-	:dl=6*\EJ:do=^J:ho=^Y:k0=\EA:k1=\EB:k2=\EC:k3=\ED:k4=\EE:\
-	:k5=\EF:k6=\EG:k7=\EH:k8=\Ea:k9=\Eb:kA=\EL:kD=\EI:kE=^V:\
-	:kI=\EK:kL=\EL:kS=^X:kT=^O:kb=^H:kd=^J:kh=^Y:kl=^H:kr=^U:\
-	:ku=^Z:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:l8=F9:\
-	:l9=F10:le=^H:ll=^Y^Z:nd=^U:r1=\031\030\002\003\017:sf=^J:\
-	:up=^Z:
-#
-# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
-#
-# Part of the long initialization string defines the "DOWN" key to the left
-# of the tab key to send an ESC.  The real ESC key is positioned way out
-# in right field.
-#
-# The termcap won't work in 132 column mode due to the way it it moves the
-# cursor.  Termcap doesn't have the capability (as far as I could tell) to
-# handle the 721 in 132 column mode.
-#
-# (cdc721: changed :ri: to :sr: -- esr)
-cdc721-esc|Control Data 721:\
-	:am:bs:bw:ms:pt:xo:\
-	:co#80:it#8:kn#10:li#30:\
-	:al=^^R:bl=^G:bt=^^^K:cd=^^P:ce=^K:cl=^L:cm=\002%r%+ %+ :\
-	:ct=^^^RY:dc=^^N:dl=^^Q:do=^Z:ei=:ho=^Y:ic=^^O:im=:\
-	:is=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o:\
-	:k0=^^q:k1=^^r:k2=^^s:k3=^^t:k4=^^u:k5=^^v:k6=^^w:k7=^^x:\
-	:k8=^^y:k9=^^z:kb=^H:kd=^Z:ke=^^^Rl:kh=^Y:kl=^H:kr=^X:\
-	:ks=^^^Rk:ku=^W:le=^H:ll=^B =:mb=^N:\
-	:me=\017\025\035\036E\036\022\\:mh=^\:mk=^^^R[:mr=^^D:\
-	:nd=^X:se=^^E:sf=\036W =\036U:so=^^D:sr=\036W =\036V:\
-	:st=^^^RW:ue=^]:up=^W:us=^\:
-
-#### Getronics
-#
-# Getronics is a Dutch electronics company that at one time was called
-# `Geveke' and made async terminals; but (according to the company itself!)
-# they've lost all their documentation on the command set.  The hardware
-# documentation suggests the terminals were actually manufactured by a
-# Taiwanese electronics company named Cal-Comp.  There are known
-# to have been at least two models, the 33 and the 50.
-#
-
-# The 50 seems to be a top end vt220 clone, with the addition of a higher
-# screen resolution, a larger screen, at least 1 page of memory above and
-# below the screen, apparently pages of memory right and left of the screen
-# which can be panned, and about 75 function keys (15 function keys x normal,
-# shift, control, func A, func B). It also has more setup possibilities than
-# the vt220. The monitor case is dated November 1978 and the keyboard case is
-# May 1982.
-#
-# The vt100 emulation works as is.  The entry below describes the rather
-# non-conformant (but more featureful) ANSI mode.
-#
-# From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-visa50|geveke visa 50 terminal in ansi 80 character mode:\
-	:bw:mi:ms:\
-	:co#80:li#25:\
-	:AL=\E[%dL:DC=\E[%dX:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:K1=\E[f:K2=\EOP:K3=\EOQ:K4=\EOR:K5=\EOS:LE=\E[%dD:\
-	:RA=\E[?7l:RI=\E[%dC:SA=\E?7h:UP=\E[%dA:ae=\E[3l:al=\E[L:\
-	:as=\E3h:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%dG:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:ct=\E[3g:cv=\E[%i%dd:dc=\E[X:dl=\E[M:do=\E[B:ei=\E[4l:\
-	:ho=\E[H:ic=\E[@:im=\E[4h:\
-	:is=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h:k0=\E010:\
-	:k1=\E001:k2=\E002:k3=\E003:k4=\E004:k5=\E005:k6=\E006:\
-	:k7=\E007:k8=\E008:k9=\E009:k;=\E011:kD=\177:kL=\EOS:kb=^H:\
-	:kd=\E[A:ke=\E>:kh=\E[f:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:\
-	:l2=A delete char:l3=A insert line:l4=A delete line:\
-	:l5=A clear:l6=A ce of/cf gn:l7=A print:l8=A on-line:\
-	:l9=A funcl0=A send:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0;2m:\
-	:mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=^M^J:se=\E[0;2m:\
-	:sf=^J:so=\E[2;7m:ta=^I:ue=\E[0m:up=\E[A:us=\E[4m:\
-	:vb=\E[?5h\E[?5l:
-
-#### Human Designed Systems (Concept)
-#
-#	Human Designed Systems
-#	400 Fehley Drive
-#	King of Prussia, PA 19406
-#	Vox: (610)-277-8300
-#	Fax: (610)-275-5739
-#	Net: support@hds.com
-#
-# John Martin <john@hds.com> is their termcap expert.  They're mostly out of
-# the character-terminal business now (1995) and making X terminals.  In
-# particular, the whole `Concept' line described here was discontinued long
-# ago.
-#
-
-# From: <vax135!hpk>  Sat Jun 27 07:41:20 1981
-# Extensive changes to c108 by arpavax:eric Feb 1982
-# Some unknown person at SCO then translated it to terminfo.
-#
-# There seem to be a number of different versions of the C108 PROMS
-# (with bug fixes in its Z-80 program).
-#
-# The first one that we had would lock out the keyboard of you
-# sent lots of short lines (like /usr/dict/words) at 9600 baud.
-# Try that on your C108 and see if it sends a ^S when you type it.
-# If so, you have an old version of the PROMs.
-#
-# You should configure the C108 to send ^S/^Q before running this.
-# It is much faster (at 9600 baud) than the c100 because the delays
-# are not fixed.
-# new status line display entries for c108-8p:
-# :i3: - init str #3 - setup term for status display -
-# set programmer mode, select window 2, define window at last
-# line of memory, set bkgnd stat mesg there, select window 0.
-#
-# :ts: - to status line - select window 2, home cursor, erase to
-# end-of-window, 1/2 bright on, goto(line#0, col#?)
-#
-# :fs: - from status line - 1/2 bright off, select window 0
-#
-# :ds: - disable status display - set bkgnd status mesg with
-# illegal window #
-#
-# There are probably more function keys that should be added but
-# I don't know what they are.
-#
-# No delays needed on c108 because of ^S/^Q handshaking
-#
-c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages:\
-	:i2=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev  \001\177p\Ep\n:\
-	:te=\Ev  \001\177p\Ep\r\n:tc=c108-4p:
-c108-4p|concept108-4p|concept 108 w/4 pages:\
-	:bs:es:hs:xo:\
-	:pb@:\
-	:ac=jEkTl\\mMqLxU:ae=\Ej\s:as=\Ej!:\
-	:..cm=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c:\
-	:cr=^M:dc=\E 1:ds=\E ;\177:fs=\Ee\E z\s:i1=\EK\E!\E F:\
-	:i2=\EU\E z"\Ev\177 !p\E ;"\E z \Ev  \001 p\Ep\n:\
-	:sf=^J:te=\Ev  \001 p\Ep\r\n:ti=\EU\Ev  8p\Ep\r\E\025:\
-	:..ts=\E z"\E?\E\005\EE\Ea %+\s:ve=\Ew:vs=\EW:tc=c100:
-c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video:\
-	:te=\Ev  \002 p\Ep\r\n:ti=\EU\Ev  8p\Ep\r:\
-	:tc=c108-rv-4p:
-c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video:\
-	:i1=\Ek:se=\Ee:so=\EE:vb=\EK\Ek:tc=c108-4p:
-c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode:\
-	:co#132:\
-	:i1=\E F\E":te=\Ev  ^A0\001D\Ep\r\n:\
-	:ti=\EU\Ev  8\001D\Ep\r:tc=c108-8p:
-
-# Concept 100:
-# These have only window relative cursor addressing, not screen
-# relative. To get it to work right here, smcup/rmcup (which
-# were invented for the concept) lock you into a one page
-# window for screen style programs.
-#
-# To get out of the one page window, we use a clever trick:
-# we set the window size to zero ("\Ev    " in rmcup) which the
-# terminal recognizes as an error and resets the window to all
-# of memory.
-#
-# This trick works on c100 but does not on c108, sigh.
-#
-# Some tty drivers use cr3 for concept, others use nl3, hence
-# the delays on cr and ind below. This padding is only needed at
-# 9600 baud and up.  One or the other is commented out depending on
-# local conventions.
-#
-# 2 ms padding on :te: isn't always enough. 6 works fine. Maybe
-# less than 6 but more than 2 will work.
-#
-# Note: can't use function keys f7-f10 because they are
-# indistinguishable from arrow keys (!), also, del char and
-# clear eol use xon/xoff so they probably won't work very well.
-#
-# Also note that we don't define insrt/del char/delline/eop/send
-# because they don't transmit unless we reset them - I figured
-# it was a bad idea to clobber their definitions.
-#
-# The <mc5> sequence changes the escape character to ^^ so that
-# escapes will be passed through to the printer. Only trouble
-# is that ^^ won't be - ^^ was chosen to be unlikely.
-# Unfortunately, if you're sending raster bits through to be
-# plotted, any character you choose will be likely, so we lose.
-#
-# \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
-# cannot be # in is2 because it will hang a c100 with no printer
-# if sent twice.
-c100|concept100|concept|c104|c100-4p|hds concept 100:\
-	:am:bs:eo:mi:ul:xn:\
-	:co#80:li#24:pb#9600:vt#8:\
-	:al=\E\022:bl=^G:cd=\E\005:ce=\E\025:cl=\E?\E\005:\
-	:cm=\Ea%+ %+ :cr=\r:dc=\E\021:dl=\E\002:do=^J:ei=\E\s\s:\
-	:i1=\EK:i2=\Ev    \Ep\n:im=\E^P:ip=:\
-	:is=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c:\
-	:k1=\E5:k2=\E6:k3=\E7:k4=\E8:k5=\E9:k6=\E\:a:k7=\E\:b:\
-	:k8=\E\:c:kA=\E^R:kB=\E':kD=\E^Q:kE=\E^S:kF=\E[:kI=\E^P:\
-	:kL=\E^B:kM=\E\0:kN=\E-:kP=\E.:kR=\E\\:kS=\E^C:kT=\E]:kb=^H:\
-	:kd=\E<:ke=\Ex:kh=\E?:kl=\E>:kr=\E=:ks=\EX:kt=\E_:ku=\E;:\
-	:le=^H:mb=\EC:me=\EN@:mh=\EE:mk=\EH:mp=\EI:mr=\ED:nd=\E=:\
-	:pf=\036o \E\EQ!\EYP\027:po=\EQ"\EY(\027\EYD\Eo \036:\
-	:rp=\Er%.%+ :se=\Ed:sf=^J:so=\ED:ta=\011:\
-	:te=\Ev    \Ep\r\n:ti=\EU\Ev  8p\Ep\r\E\025:ue=\Eg:\
-	:up=\E;:us=\EG:vb=\Ek\EK:
-c100-rv|c100-rv-4p|concept100-rv|c100 rev video:\
-	:i1=\Ek:se=\Ee:so=\EE:vb=\EK\Ek:ve@:vs@:tc=c100:
-oc100|oconcept|c100-1p|old 1 page concept 100:\
-	:in:\
-	:i3@:tc=c100:
-
-# From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
-# Lots of notes, originally inline, but ncurses doesn't grok that.
-#
-# am: 	not available in power on mode, but turned on with \E[=107;207h in
-#	is2=.  Also, \E=124l in is2= could have been used to prevent needing
-#	to specify xenl:, but that would have rendered the last space on the
-#	last line useless.
-# bw:	Not available in power on mode, but turned on with \E[=107;207h in
-#	is2=.
-# clear: Could be done with \E[2J alone, except that vi (and probably most
-#	other programs) assume that this also homes the cursor.
-# dsl:	Go to window 2, go to the beginning of the line, use a line feed to
-#	scroll the window, and go back to window 1.
-# is2:	the string may cause a warning to be issued by tic that it
-#	found a very long line and that it suspects that a comma is missing
-#	somewhere.  This warning can be ignored (unless it comes up more than
-#	once).  The initialization string contains the following commands:
-#
-#	 [Setup mode items changed from factory defaults:]
-#		\E)0			set alternate character set to
-#						graphics
-#		^O			set character set to default
-#	 [In case it wasn't]
-#		\E[m			turn off all attributes
-#	 [In case they weren't off]
-#		\E[=107;		cursor wrap and
-#			207h			character wrap on
-#		\E[90;3u		set Fkey definitions to "transmit"
-#						defaults
-#		\E[92;3u		set cursor key definitions to
-#						"transmit" defaults
-#		\E[43;1u		set shift F13 to transmit...
-#		\177\E$P\177
-#		\E[44;1u		set shift F14 to transmit...
-#			\177\E$Q\177
-#		\E[45;1u		set shift F15 to transmit...
-#			\177\E$R\177
-#		\E[46;1u		set shift F16 to transmit...
-#			\177\E$S\177
-#		\E[200;1u		set shift up to transmit...
-#			\177\E$A\177
-#		\E[201;1u		set shift down to transmit...
-#			\177\E$B\177
-#		\E[202;1u		set shift right to transmit...
-#			\177\E$C\177
-#		\E[203;1u		set shift left to transmit...
-#			\177\E$D\177
-#		\E[204;1u		set shift home to transmit...
-#			\177\E$H\177
-#		\E[212;1u		set backtab to transmit...
-#			\177\E$I\177
-#		\E[213;1u		set shift backspace to transmit...
-#			\177\E$^H\177
-#		\E[214;1u		set shift del to transmit...
-#			"\E$\177"
-#	 [Necessary items not mentioned in setup mode:]
-#		\E[2!w			move to window 2
-#		\E[25;25w		define window as line 25 of memory
-#		\E[!w			move to window 1
-#		\E[2*w			show current line of window 2 as
-#						status line
-#		\E[2+x			set meta key to use high bit
-#		\E[;3+}			move underline to bottom of character
-#
-#	All Fkeys are set to their default transmit definitions with \E[90;3u
-#	in is2=.  IMPORTANT:  to use this terminal definition, the "quit" stty
-#	setting MUST be redefined or deactivated, because the default is
-#	contained in almost all of this terminal's Fkey strings!  If for some
-#	reason "quit" cannot be altered, the Fkeys can, but it would be
-#	necessary to change ^| to ^] in all of these definitions, and add
-#	\E[2;029!t to is2.
-# lines: is set to 24 because this terminal refuses to treat the 25th
-#	line normally.
-# ll:	Not available in power on mode, but turned on with \E[=107;207h in
-#	is2=.
-# lm:	Pointless, given that this definition locks a single screen of
-#	memory into view, but what the hey...
-# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
-#	other attributes alone), but some programs expect this to turn off
-#	everything.
-# rmul: Could use \E[4!{ to turn off only underline (leaving any other
-#	attributes alone), but some programs expect this to turn off
-#	everything.
-# sgr:	Attributes are set on this terminal with the string \E[ followed by
-#	a list of attribute code numbers (in decimal, separated by
-#	semicolons), followed by the character m.  The attribute code
-#	numbers are:
-#		  1 for bold;
-#		  2 for dim (which is ignored in power on mode);
-#		  4 for underline;
-#		  5 for blinking;
-#		  7 for inverse;
-#		  8 for not displayable; and
-#		=99 for protected (except that there are strange side
-#		effects to protected characters which make them inadvisable).
-#	 The mapping of terminfo parameters to attributes is as follows:
-#		%p1 (standout) = bold and inverse together;
-#		%p2 (underline) = underline;
-#		%p3 (reverse) = inverse;
-#		%p4 (blink) = blinking;
-#		%p5 (dim) is ignored;
-#		%p6 (bold) = bold;
-#		%p7 (invisible) = not displayable;
-#		%p8 (protected) is ignored; and
-#		%p9 (alt char set) = alt char set.
-#	 The code to do this is:
-#		\E[0		OUTPUT	\E[0
-#		%?%p1%p6%O	IF	(standout; bold) OR
-#		%t;1		THEN	OUTPUT	;1
-#		%;		ENDIF
-#		%?%p2		IF	underline
-#		%t;4		THEN	OUTPUT	;4
-#		%;		ENDIF
-#		%?%p4		IF	blink
-#		%t;5		THEN	OUTPUT	;5
-#		%;		ENDIF
-#		%?%p1%p3%O	IF	(standout; reverse) OR
-#		%t;7		THEN	OUTPUT	;7
-#		%;		ENDIF
-#		%?%p7		IF	invisible
-#		%t;8		THEN	OUTPUT	;8
-#		%;		ENDIF
-#		m		OUTPUT	m
-#		%?%p9		IF	altcharset
-#		%t^N		THEN	OUTPUT	^N
-#		%e^O		ELSE	OUTPUT	^O
-#		%;		ENDIF
-# sgr0: Everything is turned off (including alternate character set), since
-#	there is no way of knowing what it is that the program wants turned
-#	off.
-# smul: The "underline" attribute is reconfigurable to an overline or
-#	strikethru, or (as done with \E[;3+} in is2=), to a line at the true
-#	bottom of the character cell.  This was done to allow for more readable
-#	underlined characters, and to be able to distinguish between an
-#	underlined space, an underscore, and an underlined underscore.
-# xenl: Terminal can be configured to not need this, but this "glitch"
-#	behavior is actually preferable with autowrap terminals.
-#
-# Parameters kf31= thru kf53= actually contain the strings sent by the shifted
-# Fkeys.  There are no parameters for shifted Fkeys in terminfo.  The is2
-# string modifies the 'O' in kf43 to kf46 to a '$'.
-#
-# kcbt was originally ^I but redefined in is2=.
-# kHOM was \E[H originally but redefined in is2=, as were a number of
-# other keys.
-# kDC was originally \177 but redefined in is2=.
-#
-# kbs:	Shift was also ^H originally but redefined as \E$^H in is2=.
-# tsl:	Go to window 2, then do an hpa=.
-#
-#------- flash=\E[8;3!}^G\E[3;3!}
-#------- flash=\E[?5h$<100>\E[?5l
-# There are two ways to flash the screen, both of which have their drawbacks.
-# The first is to set the bell mode to video, transmit a bell character, and
-# set the bell mode back - but to what?  There is no way of knowing what the
-# user's old bell setting was before we messed with it.  Worse, the command to
-# set the bell mode also sets the key click volume, and there is no way to say
-# "leave that alone", or to know what it's set to, either.
-# The second way to do a flash is to set the screen to inverse video, pad for a
-# tenth of a second, and set it back - but like before, there's no way to know
-# that the screen wasn't ALREADY in inverse video, or that the user may prefer
-# it that way.  The point is moot anyway, since vi (and probably other
-# programs) assume that by defining flash=, you want the computer to use it
-# INSTEAD of bel=, rather than as a secondary type of signal.
-#
-#------- cvvis=\E[+{
-# The is the power on setting, which is also as visible as the cursor
-# gets.
-#-------  wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
-# Windowing is possible, but not defined here because it is also used to
-# emulate status line functions.  Allowing a program to set a window could
-# clobber the status line or render it unusable.  There is additional memory,
-# but screen scroll functions are destructive and do not make use of it.
-#
-#-------   dim=			Not available in power on mode.
-# You have a choice of defining low intensity characters as "half bright" and
-# high intensity as "normal", or defining low as "normal" and high as "bold".
-# No matter which you choose, only one of either "half bright" or "bold" is
-# available at any time, so taking the time to override the default is
-# pointless.
-#
-#-------  prot=\E[=0;99m
-# Not defined, because it appears to have some strange side effects.
-#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
-#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
-#-------   pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
-#	 Available, but making them available to programs is inadvisable.
-#	 The code to do this is:
-#		%?%p1%{24}%<	IF	((key; 24) <;
-#		%p1%{30}%>		 ((key; 30) >;
-#		%p1%{54}%<		  (key; 54) <
-#		%A			 ) AND
-#		%O		  	) OR
-#	 [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
-#		%t\E[		THEN	OUTPUT	\E[
-#		%p1%d			OUTPUT	(key) as decimal
-#	 [next line applies to pfx only]
-#		;1			OUTPUT	;1
-#		u			OUTPUT	u
-#		\177			OUTPUT	\177
-#		%p2%s			OUTPUT	(string) as string
-#		\177			OUTPUT	\177
-#	 [DEL chosen as delimiter, but could be any character]
-#	 [implied:		ELSE	do nothing]
-#		%;		ENDIF
-#
-#-------   rs2=
-# Not defined since anything it might do could be done faster and easier with
-# either Meta-Shift-Reset or the main power switch.
-#
-#-------  smkx=\E[1!z
-#-------  rmkx=\E[!z
-# These sequences apply to the cursor and setup keys only, not to the
-# numeric keypad.  But it doesn't matter anyway, since making these
-# available to programs is inadvisable.
-# For the key definitions below, all sequences beginning with \E$ are
-# custom and programmed into the terminal via is2.  \E$ also has no
-# meaning to any other terminal.
-#
-#------- cmdch=\E[;%p1%d!t
-# Available, but making it available to programs is inadvisable.
-#------- smxon=\E[1*q
-# Available, but making it available to programs is inadvisable.
-# Terminal will send XON/XOFF on buffer overflow.
-#------- rmxon=\E[*q
-# Available, but making it available to programs is inadvisable.
-# Terminal will not notify on buffer overflow.
-#-------   smm=\E[2+x
-#-------   rmm=\E[+x
-# Available, but making them available to programs is inadvisable.
-#
-# Printing:
-#	 It's not made clear in the manuals, but based on other ansi/vt type
-#	 terminals, it's a good guess that this terminal is capable of both
-#	 "transparent print" (which doesn't copy data to the screen, and
-#	 therefore needs mc5i: specified to say so) and "auxilliary print"
-#	 (which does duplicate printed data on the screen, in which case mc4=
-#	 and mc5= should use the \E[?4i and \E[?5i strings instead).
-
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-# WARNING: this entry, 1130 bytes long, may core-dump older termcap libraries!
-hds200|Human Designed Systems HDS200:\
-	:am:bw:es:hs:km:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:lm#0:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\
-	:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:\
-	:ds=\E[2!w\r\n\E[!w:ei=\E[4l:fs=\E[!w:ho=\E[H:im=\E[4h:\
-	:is=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+}:\
-	:k1=^\001\r:k2=^\002\r:k3=^\003\r:k4=^\004\r:k5=^\005\r:\
-	:k6=^\006\r:k7=^\007\r:k8=^\008\r:k9=^\009\r:kD=\177:\
-	:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\
-	:ku=\E[A:le=\E[D:ll=\E[H\E[A:mb=\E[0;5m:md=\E[0;1m:\
-	:me=\E[m\017:mr=\E[0;7m:nd=\E[C:nw=\E[E:rc=\E8:sc=\E7:\
-	:se=\E[m\017:sf=\ED:so=\E[0;1;7m:sr=\EM:st=\EH:ta=^I:\
-	:ts=\E[2!w\E[%i%dG:ue=\E[m\017:up=\E[A:us=\E[0;4m:\
-	:ve=\E[+{:vi=\E[6+{:
-
-# :ta: through :ce: included to specify padding needed in raw mode.
-# (avt-ns: added empty <acsc> to suppress a tic warning --esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-avt-ns|concept avt no status line:\
-	:am:bs:eo:mi:ul:xn:xo:\
-	:co#80:it#8:li#24:lm#192:\
-	:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ac=:ae=\016:al=\E[L:as=\017:bl=^G:\
-	:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%+^AG:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[2g:\
-	:cv=\E[%+^Ad:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\
-	:i1=\E[=103l\E[=205l:ic=\E[@:im=\E[4h:ip=:\
-	:is=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kA=\E^C\r:kD=\E^B\r:\
-	:kI=\E^A\r:kS=\E^D\r:kb=^H:kd=\E[B:ke=\E[!z\E[0;2u:\
-	:kh=\E[H:kl=\E[D:kr=\E[C:ks=\E[1!z\E[0;3u:ku=\E[A:le=^H:\
-	:ll=\E[24H:mb=\E[5m:md=\E[1m:me=\E[m:mh=\E[1!{:mk=\E[8m:\
-	:mp=\E[99m:mr=\E[7m:nd=\E[C:pf=\E[4i:pl=\E[%d;0u#%s#:\
-	:po=\E[5i:ps=\E[0i:px=\E[%d;1u#%s#:rc=\E8:sc=\E7:\
-	:se=\E[7!{:sf=\n:so=\E[7m:sr=\EM:st=\EH:ta=\011:\
-	:te=\E[w\E2\r\n:ti=\E[=4l\E[1;24w\E2\r:ue=\E[4!{:\
-	:up=\E[A:us=\E[4m:ve=\E[=119l:vs=\E[=119h:
-avt-rv-ns|concept avt in reverse video mode/no status line:\
-	:i1=\E[=103l\E[=205h:vb=\E[=205l\E[=205h:tc=avt-ns:
-avt-w-ns|concept avt in 132 column mode/no status line:\
-	:i1=\E[=103h\E[=205l:ti=\E[H\E[1;24;1;132w:tc=avt-ns:
-avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video:\
-	:i1=\E[=103h\E[=205h:ti=\E[H\E[1;24;1;132w:\
-	:vb=\E[=205l\E[=205h:tc=avt-ns:
-
-# Concept AVT with status line. We get the status line using the
-# "Background status line" feature of the terminal. We swipe the
-# first line of memory in window 2 for the status line, keeping
-# 191 lines of memory and 24 screen lines for regular use.
-# The first line is used instead of the last so that this works
-# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
-# assumes an 8 page AVT but lm isn't currently used anywhere.)
-#
-avt+s|concept avt status line changes:\
-	:es:hs:\
-	:lm#191:\
-	:ds=\E[0*w:fs=\E[1;1!w:\
-	:i2=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n:\
-	:te=\E[2w\E2\r\n:ti=\E[2;25w\E2\r:\
-	:ts=\E[2;1!w\E[;%dH\E[2K:
-avt|avt-s|concept-avt|avt w/80 columns:\
-	:tc=avt+s:tc=avt-ns:
-avt-rv|avt-rv-s|avt reverse video w/sl:\
-	:i1=\E[=103l\E[=205h:vb=\E[=205l\E[=205h:tc=avt+s:\
-	:tc=avt-ns:
-avt-w|avt-w-s|concept avt 132 cols+status:\
-	:i1=\E[=103h\E[=205l:ti=\E[H\E[1;24;1;132w:tc=avt+s:\
-	:tc=avt-ns:
-avt-w-rv|avt-w-rv-s|avt wide+status+rv:\
-	:i1=\E[=103h\E[=205h:ti=\E[H\E[1;24;1;132w:\
-	:vb=\E[=205l\E[=205h:tc=avt+s:tc=avt-ns:
-
-#### Contel Business Systems.
-#
-
-# Contel c300 and c320 terminals.
-contel300|contel320|c300|Contel Business Systems C-300 or C-320:\
-	:am:in:xo:\
-	:co#80:li#24:sg#1:\
-	:al=\EL:bl=^G:cd=\EJ:ce=\EI:cl=\EK:cm=\EX%+ \EY%+ :cr=^M:\
-	:ct=\E3:dc=\EO:dl=\EM:do=^J:ei=:ho=\EH:ic=\EN:im=:ip=:k0=\ERJ:\
-	:k1=\ERA:k2=\ERB:k3=\ERC:k4=\ERD:k5=\ERE:k6=\ERF:k7=\ERG:\
-	:k8=\ERH:k9=\ERI:kb=^H:le=^H:ll=\EH\EA:me=\E!\0:nd=\EC:\
-	:se=\E!\0:sf=^J:so=\E!\r:st=\E1:up=\EA:\
-	:vb=\020\002\020\003:
-# Contel c301 and c321 terminals.
-contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321:\
-	:ei=:ic@:im=:ip@:se=\E!\0:so=\E!\r:vb@:tc=contel300:
-
-#### Data General (dg)
-#
-# According to James Carlson <carlson@xylogics.com> writing in January 1995,
-# the terminals group at Data General was shut down in 1991; all these
-# terminals have thus been discontinued.
-#
-# DG terminals have function keys that respond to the SHIFT and CTRL keys,
-# e.g., SHIFT-F1 generates a different code from F1.  To number the keys
-# sequentially, first the unmodified key codes are listed as F1 through F15.
-# Then their SHIFT versions are listed as F16 through F30, their CTRL versions
-# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
-# F46 through F60.  This is done in the private "includes" below whose names
-# start with "dgkeys+".
-#
-# DG terminals generally support 8 bit characters.  For each of these terminals
-# two descriptions are supplied:
-#	1) A default description for 8 bits/character communications, which
-#	   uses the default DG international character set and keyboard codes.
-#	2) A description with suffix "-7b" for 7 bits/character communications.
-#	   This description must use the NON-DEFAULT native keyboard language.
-
-# Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
-# Ctrl/Shift fdkeys (kf34-kf44).
-
-dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys:\
-	:%9=\233i:F1=\233011z:F2=\233012z:F3=\233013z:\
-	:F4=\233014z:F5=\233000z:F6=\233101z:F7=\233102z:\
-	:F8=\233103z:F9=\233104z:FA=\233105z:FB=\233106z:\
-	:FC=\233107z:FD=\233108z:FE=\233109z:FF=\233110z:\
-	:FG=\233111z:FH=\233112z:FI=\233113z:FJ=\233114z:\
-	:FK=\233100z:FL=\233201z:FM=\233202z:FN=\233203z:\
-	:FO=\233204z:FP=\233205z:FQ=\233206z:FR=\233207z:\
-	:FS=\233208z:FT=\233209z:FU=\233210z:FV=\233211z:\
-	:FW=\233212z:FX=\233213z:FY=\233214z:FZ=\233200z:\
-	:Fa=\233301z:Fb=\233302z:Fc=\233303z:Fd=\233304z:\
-	:Fe=\233305z:Ff=\233306z:Fg=\233307z:Fh=\233308z:\
-	:Fi=\233309z:Fj=\233310z:Fk=\233311z:Fl=\233312z:\
-	:Fm=\233313z:Fn=\233314z:Fo=\233300z:K1=\233020z:\
-	:K3=\233021z:K4=\233022z:K5=\233023z:k1=\233001z:\
-	:k2=\233002z:k3=\233003z:k4=\233004z:k5=\233005z:\
-	:k6=\233006z:k7=\233007z:k8=\233008z:k9=\233009z:\
-	:k;=\233010z:kC=\2332J:kE=\233K:kd=\233B:kh=\233H:\
-	:kl=\233D:kr=\233C:ku=\233A:
-
-dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys:\
-	:%9=\E[i:F1=\E[011z:F2=\E[012z:F3=\E[013z:F4=\E[014z:\
-	:F5=\E[000z:F6=\E[101z:F7=\E[102z:F8=\E[103z:F9=\E[104z:\
-	:FA=\E[105z:FB=\E[106z:FC=\E[107z:FD=\E[108z:FE=\E[109z:\
-	:FF=\E[110z:FG=\E[111z:FH=\E[112z:FI=\E[113z:FJ=\E[114z:\
-	:FK=\E[100z:FL=\E[201z:FM=\E[202z:FN=\E[203z:FO=\E[204z:\
-	:FP=\E[205z:FQ=\E[206z:FR=\E[207z:FS=\E[208z:FT=\E[209z:\
-	:FU=\E[210z:FV=\E[211z:FW=\E[212z:FX=\E[213z:FY=\E[214z:\
-	:FZ=\E[200z:Fa=\E[301z:Fb=\E[302z:Fc=\E[303z:Fd=\E[304z:\
-	:Fe=\E[305z:Ff=\E[306z:Fg=\E[307z:Fh=\E[308z:Fi=\E[309z:\
-	:Fj=\E[310z:Fk=\E[311z:Fl=\E[312z:Fm=\E[313z:Fn=\E[314z:\
-	:Fo=\E[300z:K1=\E[020z:K3=\E[021z:K4=\E[022z:K5=\E[023z:\
-	:k1=\E[001z:k2=\E[002z:k3=\E[003z:k4=\E[004z:k5=\E[005z:\
-	:k6=\E[006z:k7=\E[007z:k8=\E[008z:k9=\E[009z:k;=\E[010z:\
-	:kC=\E[2J:kE=\E[K:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:
-
-dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys:\
-	:F1=^^{:F2=^^a:F3=^^b:F4=^^c:F5=^^d:F6=^^e:F7=^^f:F8=^^g:\
-	:F9=^^h:FA=^^i:FB=^^j:FC=^^k:FD=^^1:FE=^^2:FF=^^3:FG=^^4:\
-	:FH=^^5:FI=^^6:FJ=^^7:FK=^^8:FL=^^9:FM=^^\::FN=^^;:FO=^^!:\
-	:FP=^^":FQ=^^#:FR=^^$:FS=^^%%%:FT=^^&:FU=^^':FV=^^(:FW=^^):\
-	:FX=^^*:FY=^^+:k1=^^q:k2=^^r:k3=^^s:k4=^^t:k5=^^u:k6=^^v:\
-	:k7=^^w:k8=^^x:k9=^^y:k;=^^z:kC=^L:kE=^K:kd=^Z:kh=^H:kl=^Y:\
-	:kr=^X:ku=^W:
-
-dgkeys+15|Private entry describing 15 DG mode special keys:\
-	:#2=^^^H:#4=^^^Y:%i=^^^X:F1=^^{:F2=^^|:F3=^^}:F4=^^~:F5=^^p:\
-	:F6=^^a:F7=^^b:F8=^^c:F9=^^d:FA=^^e:FB=^^f:FC=^^g:FD=^^h:\
-	:FE=^^i:FF=^^j:FG=^^k:FH=^^l:FI=^^m:FJ=^^n:FK=^^`:FL=^^1:\
-	:FM=^^2:FN=^^3:FO=^^4:FP=^^5:FQ=^^6:FR=^^7:FS=^^8:FT=^^9:\
-	:FU=^^\::FV=^^;:FW=^^<:FX=^^=:FY=^^>:FZ=^^0:Fa=^^!:Fb=^^":\
-	:Fc=^^#:Fd=^^$:Fe=^^%%%:Ff=^^&:Fg=^^':Fh=^^(:Fi=^^):Fj=^^*:\
-	:Fk=^^+:Fl=^^,:Fm=^^-:Fn=^^.:Fo=^^\s:K1=^^\\:K3=^^]:K4=^^^:\
-	:K5=^^_:k1=^^q:k2=^^r:k3=^^s:k4=^^t:k5=^^u:k6=^^v:k7=^^w:\
-	:k8=^^x:k9=^^y:k;=^^z:
-
-# Data General color terminals use the "Tektronix" color model.  The total
-# number of colors varies with the terminal model, as does support for
-# attributes used in conjunction with color.
-
-# Removed u7, u8 definitions since they conflict with tack:
-#		Preserve user-defined colors in at least some cases.
-#	u7=^^Fh,
-#		Default is ACM mode.
-#	u8=^^F}20^^Fi^^F}21,
-#
-dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode:\
-	:ut:\
-	:Co#16:NC#53:pa#256:\
-	:..AB=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c:\
-	:..AF=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c:\
-	:Sb=\036B%+0:Sf=\036A%+0:op=\036Ad\036Bd:
-
-dg+fixed|Fixed color info for DG D430C terminals in DG mode:\
-	:tc=dgunix+fixed:
-
-# Video attributes are coordinated using static variables set by "sgr", then
-# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
-# (D=dim, U=underline, B=blink, R=reverse.)
-dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode:\
-	:ut:\
-	:Co#8:NC#16:pa#64:\
-	:..AB=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m:\
-	:..AF=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m:\
-	:..Sb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m:\
-	:..Sf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m:\
-	:op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m:
-
-dg+color|Color info for Data General D470C terminals in ANSI mode:\
-	:Co#16:NC#53:pa#256:\
-	:..AB=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m:\
-	:..AF=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m:\
-	:..Sb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m:\
-	:..Sf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m:\
-	:tc=dg+color8:
-
-dgmode+color8|Color info for Data General D220/D230C terminals in DG mode:\
-	:ut:\
-	:Co#8:NC#16:pa#64:\
-	:AB=\036B%+^B:AF=\036A%+^B:Sb=\036B%+0:Sf=\036A%+0:\
-	:op=\036Ad\036Bd:
-
-dgmode+color|Color info for Data General D470C terminals in DG mode:\
-	:Co#16:pa#256:\
-	:..AB=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c:\
-	:..AF=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c:\
-	:tc=dgmode+color8:
-
-dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode:\
-	:cc:ut:\
-	:Co#52:NC#53:pa#26:\
-	:..Ip=\036RG0%p1%02X%p2%{256}%*%{1001}%/%02X%p3%{256}%*%{1001}%/%02X%p4%{256}%*%{1001}%/%02X%p5%{256}%*%{1001}%/%02X%p6%{256}%*%{1001}%/%02X%p7%{256}%*%{1001}%/%02X:\
-	:oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00:\
-	:op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D:\
-	:..sp=\036RG2%p1%02X:
-
-# Colors are in the order:  normal, reverse, dim, dim + reverse.
-dg+ccc|Configurable color info for DG D430C terminals in DG mode:\
-	:cc:ut:\
-	:Co#52:NC#53:pa#26:\
-	:..Ip=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c:\
-	:oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00:\
-	:op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=:\
-	:sp=\036RG2%+^P%+^P:
-
-# The generic DG terminal type (an 8-bit-clean subset of the 6053)
-# Initialization string 1 sets:
-#	^R		- vertical scrolling enabled
-#	^C		- blinking enabled
-dg-generic|Generic Data General terminal in DG mode:\
-	:NL:am:bw:ms:xo:\
-	:co#80:li#24:\
-	:bl=^G:ce=^K:cl=^L:cm=\020%r%.%.:cr=^M:do=^Z:i1=^R^C:le=^Y:\
-	:mb=^N:me=^O^U^]:mh=^\:nd=^X:nw=^J:ps=^Q:se=^]:sf=^J:so=^\:\
-	:ue=^U:up=^W:us=^T:tc=dgkeys+11:
-
-# According to the 4.4BSD termcap file, the dg200 :cm: should be the
-# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
-# notation that's "^P%r%+\200%+\200").  Those \200s are suspicious,
-# maybe they were originally nuls (which would fit).
-
-dg200|data general dasher 200:\
-	:NL:am:bs:bw:\
-	:co#80:li#24:\
-	:bl=^G:ce=^K:cl=^L:cm=\020%r%.%.:cr=^M:do=^Z:ho=^H:k0=^^z:\
-	:k1=^^q:k2=^^r:k3=^^s:k4=^^t:k5=^^u:k6=^^v:k7=^^w:k8=^^x:\
-	:k9=^^y:kd=^Z:kh=^H:kl=^Y:kr=^X:ku=^W:l0=f10:le=^Y:nd=^X:\
-	:nw=^J:se=^^E:sf=^J:so=^^D:ue=^U:up=^W:us=^T:
-
-# Data General 210/211 (and 410?)	from Lee Pearson (umich!lp) via BRL
-dg210|dg-ansi|Data General 210/211:\
-	:am:\
-	:co#80:li#24:\
-	:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:do=\E[B:ho=\E[H:\
-	:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:nl=\E[B:\
-	:nw=\r\E[H\E[A\n:se=\E[0;m:so=\E[7;m:ue=\E[0;m:up=\E[A:\
-	:us=\E[4;m:
-# From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
-# courtesy of Carlos Rucalde of Vantage Software, Inc.
-# (dg211: this had :cm=\020%r%.%:., which was an ancient termcap hangover.
-# I suspect the d200 function keys actually work on the dg211, check it out.)
-dg211|Data General d211:\
-	:k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:kb=^Y:l0@:nw=^M^Z:\
-	:se=\036E\0/>:sf@:so=5\036D:ta=^I:te=^L:ti=^L^R:ve=^L:\
-	:vs=^L^R:tc=dg200:
-
-# dg450 from Cornell (not official)
-dg450|dg6134|data general 6134:\
-	:le@:nd=^X:tc=dg200:
-
-# Not official...
-# Note: lesser Dasher terminals will not work with vi because vi insists upon
-# having a command to move straight down from any position on the bottom line
-# and scroll the screen up, or a direct vertical scroll command.  The 460 and
-# above have both, the D210/211, for instance, has neither.  We must use ANSI
-# mode rather than DG mode because standard UNIX tty drivers assume that ^H is
-# backspace on all terminals.  This is not so in DG mode.
-# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
-# grounds that there is no matching ":ml:"
-# fixed garbled ":k9=\E[00\:z:" capability -- esr)
-dg460-ansi|Data General Dasher 460 in ANSI-mode:\
-	:am:bs:ms:ul:\
-	:co#80:it#8:li#24:\
-	:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%2;%2H:dc=\E[P:\
-	:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:is=^^F@:k0=\E[001z:\
-	:k1=\E[002z:k2=\E[003z:k3=\E[004z:k4=\E[005z:k5=\E[006z:\
-	:k6=\E[007z:k7=\E[008z:k8=\E[009z:k9=\E[010z:kb=\E[D:\
-	:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:l0=f1:l1=f2:l2=f3:\
-	:l3=f4:l4=f5:l5=f6:l6=f7:l7=f8:l9=f10:le=^H:mb=\E[5m:me=\E[m:\
-	:mh=\E[2m:mr=\E[7m:nd=\E[C:nl=\ED:se=\E[m:sf=\E[S:so=\E[7m:\
-	:sr=\E[T:ta=^I:ue=\E[05:up=\E[A:us=\E[4m:
-# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
-# Data General 605x
-# Ought to work for a Model 6242, Type D210 as well as a 605x.
-# Note that the cursor-down key transmits ^Z.  Job control users, beware!
-# This also matches a posted description of something called a `Dasher 100'
-# so there's a dg100 alias here.
-# (dg6053: the 4.4BSD file had :le=^H:, :do=^J:, :nd=^S:. -- esr)
-dg6053-old|dg100|data general 6053:\
-	:am:bs:bw:ul:\
-	:co#80:li#24:\
-	:bc=^Y:bl=^G:ce=^K:cl=^L:cm=\020%r%.%.:cr=^M:do=^Z:ho=^H:\
-	:is=^R:k0=^^q:k1=^^r:k2=^^s:k3=^^t:k4=^^u:k5=^^v:k6=^^w:\
-	:k7=^^x:k8=^^y:k9=^^z:kb=^Y:kd=^Z:kh=^H:kl=^Y:kr=^X:ku=^W:\
-	:le=^Y:nd=^X:se=\0^^E:so=\0\0\0\0\0\036D:ta=^I:te=^L:\
-	:ti=^L^R:ue=^U:up=^W:us=^T:ve=^L:vs=^L^R:
-
-# (Some performance can be gained over the generic DG terminal type)
-dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053:\
-	:xo@:\
-	:ho=^P\0\0:ll=^P\0^W:tc=dg-generic:
-
-# Like 6053, but adds reverse video and more keypad and function keys.
-d200|d200-dg|Data General DASHER D200:\
-	:ho@:ll@:md=^^D^T:me=\017\025\035\036E:mr=^^D:\
-	:..sa=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;:\
-	:se=^^E^]:so=^^D^\:tc=dgkeys+15:tc=dg6053:
-
-# DASHER D210 series terminals in ANSI mode.
-#	Reverse video, no insert/delete character/line, 7 bits/character only.
-#
-# Initialization string 1 sets:
-#	<0		- scrolling enabled
-#	<1		- blink enabled
-#	<4		- print characters regardless of attributes
-d210|d214|Data General DASHER D210 series:\
-	:NL:am:bw:ms:xo:\
-	:co#80:li#24:\
-	:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:bl=^G:cb=\E[1K:\
-	:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:cr=^M:do=\E[B:\
-	:ho=\E[H:i1=\E[<0;<1;<4l:le=^H:ll=\E[H\E[A:mb=\E[5m:\
-	:md=\E[4;7m:me=\E[m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=^J:\
-	:..sa=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m:\
-	:se=\E[m:sf=^J:so=\E[2;7m:ue=\E[m:up=\E[A:us=\E[4m:\
-	:tc=dgkeys+7b:
-
-# DASHER D210 series terminals in DG mode.
-# Like D200, but adds clear to end-of-screen and needs XON/XOFF.
-d210-dg|d214-dg|Data General DASHER D210 series in DG mode:\
-	:xo:\
-	:cd=^^FF:tc=d200-dg:
-
-# DASHER D211 series terminals in ANSI mode.
-# Like the D210, but with 8-bit characters and local printer support.
-#
-# Initialization string 2 sets:
-#	\E[2;1;1;1v
-#		2;1	- 8 bit operations
-#		1;1	- 8 bit (international) keyboard language
-#	\E(B		- default primary character set (U.S. ASCII)
-#	\E)4		- default secondary character set (international)
-#	^O		- primary character set
-#
-d211|d215|Data General DASHER D211 series:\
-	:km:\
-	:is=\E[2;1;1;1v\E(B\E)4\017:ps=\E[i:tc=dgkeys+8b:\
-	:tc=d210:
-
-# Initialization string 2 sets:
-#	\E[2;0;1;0v
-#		2;0	- 7 bit operations
-#		1;0	- 7 bit (native) keyboard language
-#	\E(0		- default character set (the keyboard native language)
-#	^O		- primary character set
-d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode:\
-	:km@:\
-	:is=\E[2;0;1;0v\E(0\017:tc=dgkeys+7b:tc=d211:
-
-# Like the D210 series, but adds support for 8-bit characters.
-#
-# Reset string 2 sets:
-#	^^N	- secondary character set
-#	^^FS0>	- 8 bit international character set
-#	^^O	- primary character set
-#	^^FS00	- default character set (matching the native keyboard language)
-#
-d211-dg|d215-dg|Data General DASHER D211 series in DG mode:\
-	:km:\
-	:rs=\036N\036FS0>\036O\036FS00:tc=d210-dg:
-
-d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode:\
-	:tc=d211-dg:
-
-# Enhanced DG mode with changes to be more UNIX compatible.
-d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode:\
-	:5i:\
-	:it#8:\
-	:#2=^^Pf:#4=^^Pd:%9=^^P0:%f=^^P1:%i=^^Pc:\
-	:ac=a\177j$k"l!m#n)q+t'u&v(w%x*:ae=\036FS00:\
-	:as=\036FS11:ce=^^PE:ch=\020%.\177:cl=^^PH:cv=\020\177%.:\
-	:do=^^PB:ho=^^PF:i1=\022\003\036P@1:i2=\036Fz0:kC=^^PH:\
-	:kE=^^PE:kd=^^PB:kh=^^PF:kl=^^PD:kr=^^PC:ku=^^PA:le=^^PD:\
-	:mb=^^PI:me=\036PJ\025\035\036E\036FS00:nd=^^PC:pf=^^Fa:\
-	:po=^^F`:ps=\036F?9:rs=\036N\036FS0E\036O\036FS00:\
-	:..sa=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;:\
-	:sf=^J:ta=^I:up=^^PA:tc=dgkeys+15:tc=d216-dg:
-d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines:\
-	:li#25:\
-	:i2=\036Fz2:tc=d216+:
-
-d217-unix|Data General DASHER D217 in DG-UNIX mode:\
-	:tc=d216-unix:
-d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines:\
-	:tc=d216-unix-25:
-
-# DASHER D220 color terminal in ANSI mode.
-# Like the D470C but with fewer colors and screen editing features.
-#
-# Initialization string 1 sets:
-#	\E[<0;<1;<4l
-#		<0	- scrolling enabled
-#		<1	- blink enabled
-#		<4	- print characters regardless of attributes
-#	\E[m		- all attributes off
-# Reset string 1 sets:
-#	\Ec		- initial mode defaults (RIS)
-#
-d220|Data General DASHER D220:\
-	:5i@:\
-	:AL@:DL@:al@:dl@:i1=\E[<0;<1;<4l\E[m:pf@:po@:r1=\Ec:\
-	:tc=dg+color8:tc=d470c:
-
-d220-7b|Data General DASHER D220 in 7 bit mode:\
-	:5i@:\
-	:AL@:DL@:al@:dl@:i1=\E[<0;<1;<4l\E[m:pf@:po@:r1=\Ec:\
-	:tc=dg+color8:tc=d470c-7b:
-
-# Initialization string 3 sets:
-#	- default cursor (solid rectangle)
-# Reset string 2 sets:
-#	^^N     - secondary character set
-#	^^FS0>  - 8 bit international character set
-#	^^O     - primary character set
-#       ^^FS00  - default character set (matching the native keyboard language)
-#
-d220-dg|Data General DASHER D220 color terminal in DG mode:\
-	:5i@:\
-	:al@:dl@:ho@:i2=\036FQ2:is@:ll@:pf@:po@:r1@:\
-	:rs=\036N\036FS0>\036O\036FS00:tc=dgmode+color8:\
-	:tc=d470c-dg:
-
-# DASHER D230C color terminal in ANSI mode.
-# Like the D220 but with minor ANSI compatibility improvements.
-#
-d230c|d230|Data General DASHER D230C:\
-	:ke=\E[2;1v:ks=\E[2;0v:mb=\E[5;50m:md=\E[4;7;50m:\
-	:me=\E[50m\E)4\017:mh=\E[2;50m:mr=\E[7;50m:nw=^M^J:\
-	:..sa=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;:\
-	:se=\E[50m:so=\E[2;7;50m:ue=\E[50m:us=\E[4;50m:\
-	:tc=dgkeys+7b:tc=d220:
-
-d230c-dg|d230-dg|Data General DASHER D230C in DG mode:\
-	:tc=d220-dg:
-
-# DASHER D400/D450 series terminals.
-# These add intelligent features like insert/delete to the D200 series.
-#
-# Initialization string 2 sets:
-#	^^FQ2		- default cursor (solid rectangle)
-#	^^FW		- character protection disabled
-#	^^FJ		- normal (80 column) mode
-#	^^F\^		- horizontal scrolling enabled (for alignment)
-#	^^FX004?	- margins at columns 0 and 79
-#	^^F]		- horizontal scrolling disabled
-#	^^O		- primary character set
-#	^^FS00		- default character set (the keyboard native language)
-#	- (should reset scrolling regions, but that glitches the screen)
-# Reset string 1 sets:
-#	^^FA		- all terminal defaults except scroll rate
-# Reset string 2 sets:
-#	^^F]		- horizontal scrolling disabled
-#	^^FT0		- jump scrolling
-#
-d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series:\
-	:5i:\
-	:ac=j$k"l!m#n)q+t'u&v(w%x*:ae=^^O:al=^^FH:as=^^N:\
-	:ch=\020%.\177:cv=\020\177%.:dc=^^K:dl=^^FI:\
-	:eA=\036N\036FS11\036O:ei=:ho=^^FG:ic=^^J:im=:\
-	:is=\036FQ2\036FW\036FJ\036F^\036FX004?\036F]\036O\036FS00:\
-	:ll=\036FG\027:me=\017\025\035\036E\036O:pf=^^Fa:\
-	:po=^^F`:r1=^^FA:r2=\036F]\036FT0:\
-	:..sa=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;:\
-	:sr=^^I:ve=\036FQ2:vi=\036FQ0:tc=d210-dg:
-
-# DASHER D410/D460 series terminals in ANSI mode.
-# These add a large number of intelligent terminal features.
-#
-# Initialization string 1 sets:
-#	\E[<0;<1;<2;<4l
-#		<0	- scrolling enabled
-#		<1	- blink enabled
-#		<2	- horizontal scrolling enabled (for alignment)
-#		<4	- print characters regardless of attributes
-#	\E[5;0v		- normal (80 column) mode
-#	\E[1;1;80w	- margins at columns 1 and 80
-#	\E[1;6;<2h
-#		1	- print all characters even if protected
-#		6	- character protection disabled
-#		<2	- horizontal scrolling disabled
-#	- (should reset scrolling regions, but that glitches the screen)
-#
-# Initialization string 2 sets:
-#	\E[3;2;2;1;1;1v
-#		3;2	- default cursor (solid rectangle)
-#		2;1	- 8 bit operations
-#		1;1	- international keyboard language
-#	\E(B		- default primary character set (U.S. ASCII)
-#	\E)4		- default secondary character set (international)
-#	^O		- primary character set
-#
-#	Reset string 1 sets:
-#	\Ec		- initial mode defaults (RIS)
-#	\E[<2h		- horizontal scrolling disabled
-#
-# Reset string 2 sets:
-#	\E[4;0;2;1;1;1v
-#		4;0	- jump scrolling
-#		2;1	- 8 bit operations
-#		1;1	- 8 bit (international) keyboard language
-#	\E(B		- default primary character set (U.S. ASCII)
-#	\E)4		- default secondary character set (international)
-#
-d410|d411|d460|d461|Data General DASHER D410/D460 series:\
-	:5i:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:\
-	:ac=j$k"l!m#n)q+t'u&v(w%x*:ae=\E)4\017:al=\E[L:\
-	:as=\E)6\016:dc=\E[P:dl=\E[M:ei=:\
-	:i1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h:\
-	:ic=\E[@:im=:is=\E[3;2;2;1;1;1v\E(B\E)4\017:\
-	:me=\E[m\E)4\017:pf=\E[4i:po=\E[5i:r1=\Ec\E[<2h:\
-	:r2=\E[4;0;2;1;1;1v\E(B\E)4:\
-	:..sa=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;:\
-	:sr=\EM:ve=\E[3;2v:vi=\E[3;0v:tc=d211:
-
-# Initialization string 2 sets:
-#	\E[3;2;2;0;1;0v
-#		3;2	- default cursor (solid rectangle)
-#		2;0	- 7 bit operations
-#		1;0	- 7 bit (native) keyboard language
-#	\E(0		- default character set (the keyboard native language)
-#	^O		- primary character set
-#
-# Reset string 2 sets:
-#	\E[4;0;2;0;1;0v
-#		4;0	- jump scrolling
-#		2;0	- 7 bit operations
-#		1;0	- 7 bit (native) keyboard language
-#	\E(0		- default character set (the keyboard native language)
-#
-d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode:\
-	:km@:\
-	:ae=^O:as=^N:eA=\E)6:is=\E[3;2;2;0;1;0v\E(0\017:\
-	:me=\E[m\017:rs=\E[4;0;2;0;1;0v\E(0:\
-	:..sa=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;:\
-	:tc=dgkeys+7b:tc=d410:
-
-d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode:\
-	:km:\
-	:ae=\036FS00:as=\036FS11:eA@:\
-	:me=\017\025\035\036E\036FS00:\
-	:..sa=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;:\
-	:tc=d400-dg:
-
-# DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
-#
-# Initialization string 1 sets:
-#	\E[<0;<1;<2;<4l
-#		<0	- scrolling enabled
-#		<1	- blink enabled
-#		<2	- horizontal scrolling enabled (for alignment)
-#		<4	- print characters regardless of attributes
-#	\E[5;1v		- compressed (135 column) mode
-#	\E[1;1;126	- margins at columns 1 and 126
-#	\E[1;6;<2h
-#		1	- print all characters even if protected
-#		6	- character protection disabled
-#		<2	- horizontal scrolling disabled
-#	- (should reset scrolling regions, but that glitches the screen)
-#
-# Reset string 1 sets:
-#	\Ec		- initial mode defaults (RIS)
-#	\E[5;1v		- compressed (135 column) mode
-#	\E[1;1;126w	- margins at columns 1 and 126
-#	\E[<2h		- horizontal scrolling disabled
-#
-d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode:\
-	:co#126:\
-	:i1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h:\
-	:r1=\Ec\E[5;1v\E[1;1;126w\E[<2h:tc=d410:
-
-d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode:\
-	:co#126:\
-	:i1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h:\
-	:r1=\Ec\E[5;1v\E[1;1;126w\E[<2h:tc=d410-7b:
-
-d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode:\
-	:tc=d410-dg:
-
-# These add intelligent features like scrolling regions.
-d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode:\
-	:al=^^FH:..ch=\036FP%p1%2.2XFF:cl=^^FE:\
-	:..cm=\036FP%p2%2.2X%p1%2.2X:..cv=\036FPFF%p1%2.2X:\
-	:dc=^^K:dl=^^FI:ei=:ho=^^FG:ic=^^J:im=:\
-	:is=\036FQ5\036FW\036FJ\036F^\036FX004F\036O\036FS00:\
-	:ll=\036FG\036PA:ps=^A:r1=\036FA\036FT0:r2=\036P@1:\
-	:rc=\036F}11:sc=\036F}10:sr=^^I:ve=\036FQ5:vi=\036FQ0:\
-	:..wi=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X:\
-	:tc=d216+:
-d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode:\
-	:co#132:\
-	:is=\036FQ5\036FW\036FK\036F^\036FX0083\036O\036FS00:\
-	:rs=\036P@1\036FK\036FX0083:\
-	:..wi=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X:\
-	:tc=d412-unix:
-d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines:\
-	:li#25:\
-	:i2=\036Fz2:\
-	:..wi=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X:\
-	:tc=d462+:
-d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line:\
-	:es:hs:\
-	:cl=\036FG\036PH:fs=\036F}01\022:\
-	:i2=\036Fz2\036F}00\036FB180000\036F}01:ll@:\
-	:..ts=\036F}00\036FP%p1%2.2X18\036PG:\
-	:..wi=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X:\
-	:tc=d462+:
-
-#	Relative cursor motions are confined to the current window,
-#	which is not what the scrolling region specification expects.
-#	Thus, relative vertical cursor positioning must be deleted.
-d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region:\
-	:..cs=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;:\
-	:do@:ll@:up@:tc=d462+:
-
-d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode:\
-	:tc=d412-unix:
-d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode:\
-	:tc=d412-unix-w:
-d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines:\
-	:tc=d412-unix-25:
-d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line:\
-	:tc=d412-unix-s:
-d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region:\
-	:tc=d412-unix-sr:
-
-d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode:\
-	:tc=d413-unix:
-d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode:\
-	:tc=d413-unix-w:
-d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines:\
-	:tc=d413-unix-25:
-d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line:\
-	:tc=d413-unix-s:
-d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region:\
-	:tc=d413-unix-sr:
-
-d430c-dg|d430-dg|Data General D430C in DG mode:\
-	:tc=d413-dg:tc=dg+fixed:
-d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors:\
-	:tc=d413-dg:tc=dg+ccc:
-
-d430c-unix|d430-unix|Data General D430C in DG-UNIX mode:\
-	:tc=d413-unix:tc=dgunix+fixed:
-d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode:\
-	:tc=d413-unix-w:tc=dgunix+fixed:
-d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines:\
-	:tc=d413-unix-25:tc=dgunix+fixed:
-d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line:\
-	:tc=d413-unix-s:tc=dgunix+fixed:
-d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region:\
-	:tc=d413-unix-sr:tc=dgunix+fixed:
-d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors:\
-	:tc=d413-unix:tc=dgunix+ccc:
-d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors:\
-	:tc=d413-unix-w:tc=dgunix+ccc:
-d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors:\
-	:tc=d413-unix-25:tc=dgunix+ccc:
-d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors:\
-	:tc=d413-unix-s:tc=dgunix+ccc:
-d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors:\
-	:tc=d413-unix-sr:tc=dgunix+ccc:
-
-# DASHER D470C color terminal in ANSI mode.
-# Like the D460 but with 16 colors and without a compressed mode.
-#
-# Initialization string 1 sets:
-#	\E[<0;<1;<2;<4l
-#		<0	- scrolling enabled
-#		<1	- blink enabled
-#		<2	- horizontal scrolling enabled (for alignment)
-#		<4	- print characters regardless of attributes
-#	\E[1;1;80w	- margins at columns 1 and 80
-#	\E[1;6;<2h
-#		1	- print all characters even if protected
-#		6	- character protection disabled
-#		<2	- horizontal scrolling disabled
-#	- (should reset scrolling regions, but that glitches the screen)
-#
-d470c|d470|Data General DASHER D470C:\
-	:i1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h:\
-	:..sa=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;:\
-	:tc=dg+color:tc=d460:
-
-d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode:\
-	:i1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h:\
-	:..sa=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;:\
-	:tc=dg+color:tc=d460-7b:
-
-# Initialization string 2 sets:
-#	^^FQ2		- default cursor (solid rectangle)
-#	^^FW		- character protection disabled
-#	^^F\^		- horizontal scrolling enabled (for alignment)
-#	^^FX004?	- margins at columns 0 and 79
-#	^^F]		- horizontal scrolling disabled
-#	^^O		- primary character set
-#	^^FS00		- default character set (the keyboard native language)
-#	- (should reset scrolling regions, but that glitches the screen)
-#
-d470c-dg|d470-dg|Data General DASHER D470C in DG mode:\
-	:is=\036FQ2\036FW\036F^\036FX004?\036F]\036O\036FS00:\
-	:tc=dgmode+color:tc=d460-dg:
-
-# DASHER D555 terminal in ANSI mode.
-# Like a D411, but has an integrated phone.
-d555|Data General DASHER D555:\
-	:tc=d411:
-d555-7b|Data General DASHER D555 in 7-bit mode:\
-	:tc=d411-7b:
-d555-w|Data General DASHER D555 in wide mode:\
-	:tc=d411-w:
-d555-7b-w|Data General DASHER D555 in wide 7-bit mode:\
-	:tc=d411-7b-w:
-d555-dg|Data General DASHER D555 series in DG mode:\
-	:tc=d411-dg:
-
-# DASHER D577 terminal in ANSI mode.
-# Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
-d577|Data General DASHER D577:\
-	:tc=d411:
-d577-7b|Data General DASHER D577 in 7-bit mode:\
-	:tc=d411-7b:
-d577-w|Data General DASHER D577 in wide mode:\
-	:tc=d411-w:
-d577-7b-w|Data General DASHER D577 in wide 7-bit mode:\
-	:tc=d411-7b-w:
-
-d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode:\
-	:tc=d411-dg:
-
-# DASHER D578 terminal.
-# Like a D577, but without compressed mode; like a D470C in this respect.
-#
-# Initialization string 1 sets:
-#	\E[<0;<1;<2;<4l
-#		<0	- scrolling enabled
-#		<1	- blink enabled
-#		<2	- horizontal scrolling enabled (for alignment)
-#		<4	- print characters regardless of attributes
-#	\E[1;1;80w	- margins at columns 1 and 80
-#	\E[1;6;<2h
-#		1	- print all characters even if protected
-#		6	- character protection disabled
-#		<2	- horizontal scrolling disabled
-#	- (should reset scrolling regions, but that glitches the screen)
-#
-d578|Data General DASHER D578:\
-	:i1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h:tc=d577:
-d578-7b|Data General DASHER D578 in 7-bit mode:\
-	:i1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h:tc=d577-7b:
-
-#### Datamedia (dm)
-#
-# Datamedia was headquartered in Nashua, New Hampshire until it went
-# out of business in 1993, but the ID plates on the terminals referred
-# to the factory in Pennsauken, NJ.  The factory was sold to a PCB board
-# manufacturer which threw out all information about the terminals.
-#
-
-cs10|colorscan|Datamedia Color Scan 10:\
-	:ms:\
-	:co#80:li#24:\
-	:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%02;%02H:cr=^M:\
-	:do=^J:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\E[B:kl=\E[D:\
-	:kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\E[C:se=\E[m:sf=^J:\
-	:so=\E[7m:ue=\E[m:up=\E[A:us=\E[4m:
-cs10-w|Datamedia Color Scan 10 with 132 columns:\
-	:co#132:\
-	:cm=\E[%i%02;%03H:tc=cs10:
-
-# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
-dm1520|dm1521|datamedia 1520:\
-	:am:bs:xn:\
-	:co#80:it#8:li#24:\
-	:bl=^G:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :cr=^M:do=^J:ho=^Y:\
-	:kd=^J:kh=^Y:kl=^H:kr=^\:ku=^_:le=^H:nd=^\:sf=^J:ta=^I:up=^_:
-# dm2500: this terminal has both :IC: and :im:. Applications using
-# termcap/terminfo directly (rather than through ncurses) might be confused.
-dm2500|datamedia2500|datamedia 2500:\
-	:bs:nc:\
-	:co#80:li#24:\
-	:al=\020\n\030\035\030\035:bl=^G:ce=^W:cl=^^^^\177:\
-	:cm=\014%r%n%.%.:dc=\020\010\030\035:\
-	:dl=\020\032\030\035:dm=^P:do=^J:ed=^X^]:\
-	:ei=\377\377\030\035:ho=^B:ic=\020\034\030\035:im=^P:\
-	:le=^H:nd=^\:pc=\377:se=^X^]:sf=^J:so=^N:up=^Z:
-# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
-# also, has a meta-key.
-# From: <goldberger@su-csli.arpa>
-# (dmchat: ":MT:" changed to ":km:" -- esr)
-dmchat|dmchat version of datamedia 2500:\
-	:km:\
-	:al=1*\020\n\030\035\030\035:dl=2\020\032\030\035:\
-	:tc=dm2500:
-# (dm3025: ":MT:" changed to ":km:" -- esr)
-dm3025|datamedia 3025a:\
-	:bs:km:\
-	:co#80:it#8:li#24:\
-	:al=\EP\n\EQ:bl=^G:cd=\EJ:ce=\EK:cl=\EM:cm=\EY%r%+ %+ :\
-	:cr=^M:dc=\010:dl=\EP\EA\EQ:dm=\EP:do=^J:ed=\EQ:ei=\EQ:\
-	:ho=\EH:im=\EP:ip=:is=\EQ\EU\EV:le=^H:nd=\EC:se=\EO0:sf=^J:\
-	:so=\EO1:ta=^I:up=\EA:
-dm3045|datamedia 3045a:\
-	:am:bs:eo:km@:ul:xn:\
-	:al@:dc=\EB:dl@:dm@:ed@:ei=\EP:is=\EU\EV:k0=\Ey\r:k1=\Ep\r:\
-	:k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:k7=\Ev\r:\
-	:k8=\Ew\r:k9=\Ex\r:kh=\EH:kr=\EC:ku=\EA:pc=\177:se@:so@:\
-	:tc=dm3025:
-# Datamedia DT80 soft switches:
-# 1	0=Jump  1=Smooth
-# 	Autorepeat 	0=off  1=on
-# 	Screen		0=Dark 1=light
-# 	Cursor		0=u/l  1=block
-#
-# 2	Margin Bell	0=off  1=on
-# 	Keyclick	0=off  1=on
-# 	Ansi/VT52	0=VT52 1=Ansi
-# 	Xon/Xoff	0=Off  1=On
-#
-# 3	Shift3		0=Hash 1=UK Pound
-# 	Wrap		0=Off  1=On
-# 	Newline		0=Off  1=On
-# 	Interlace	0=Off  1=On
-#
-# 4	Parity		0=Odd  1=Even
-# 	Parity		0=Off  1=On
-# 	Bits/Char	0=7    1=8
-# 	Power		0=60Hz 1=50Hz
-#
-# 5	Line Interface  0=EIA  1=Loop
-# 	Aux Interface   0=EIA  1=Loop
-# 	Local Copy    	0=Off  1=On
-# 	Spare
-#
-# 6	Aux Parity	0=Odd  1=Even
-# 	Aux Parity	0=Off  1=On
-# 	Aux Bits/Char   0=7    1=8
-# 	CRT Saver	0=Off  1=On
-# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
-dm80|dmdt80|dt80|datamedia dt80/1:\
-	:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:cm=%i\E[%d;%dH:do=^J:\
-	:ho=\E[H:me=\E[m:nd=\E[C:pf=\E[4i:po=\E[5i:ps=\E[0i:\
-	:se=\E[m:so=\E[7m:sr=\EM:ue=\E[m:up=\E[A:us=\E[4m:tc=vt100:
-# except in 132 column mode, where it needs a little padding.
-# This is still less padding than the vt100, and you can always turn on
-# the ^S/^Q handshaking, so you can use vt100 flavors for things like
-# reverse video.
-dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode:\
-	:co#132:\
-	:cd=20\E[0J:ce=20\E[0K:cl=50\E[H\E[2J:cm=5\E[%i%d;%dH:\
-	:do=^J:up=5\E[A:tc=dm80:
-# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
-dt80-sas|Datamedia DT803/DTX for SAS usage:\
-	:am:bw:\
-	:co#80:li#24:\
-	:ac=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~:\
-	:ae=\EG:al=\EL:as=\EF:bl=^G:cd=^K:ce=^]:cl=^L:\
-	:cm=\E=%r%+ %+ :cr=^M:\
-	:..cs=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2:\
-	:ct=\E'0:dl=\EM:do=\EB:ff=^L:ho=^Y:is=\E)0\E<\EP\E'0\E$2:\
-	:kC=^L:kE=^]:kS=^K:kd=^J:kh=^Y:kl=^H:kr=^\:ku=^_:le=^H:me=^X:\
-	:mr=\E$2\004:nd=^\:pf=^O:po=^N:se=^X:sf=\EB:so=\E$2\004:\
-	:sr=\EI:st=\E'1:ta=^I:up=^_:
-
-# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
-# These aren't end-all Excel termcaps; but do insert/delete char/line
-# and name some of the extra function keys.  (Mike Feldman ccvaxa!feldman)
-# The naming convention has been bent somewhat, with the use of E? (where
-# E is for 'Excel') as # a name.  This was done to distinguish the entries
-# from the other Datamedias in use here, and yet to associate a model of
-# the Excel terminals with the regular datamedia terminals that share
-# major characteristics.
-excel62|excel64|datamedia Excel 62:\
-	:dc=\E[P:ei=\E[4l:im=\E[4h:k5=\EOu:k6=\EOv:k7=\EOw:k8=\EOx:\
-	:k9=\EOy:kb=^H:kd=^J:kl=^H:tc=dt80:
-excel62-w|excel64-w|datamedia Excel 62 in 132 char mode:\
-	:dc=\E[P:ei=\E[4l:im=\E[4h:k5=\EOu:k6=\EOv:k7=\EOw:k8=\EOx:\
-	:k9=\EOy:kb=^H:kd=^J:kl=^H:tc=dt80w:
-excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode:\
-	:dc=\E[P:ei=\E[4l:im=\E[4h:k5=\EOu:k6=\EOv:k7=\EOw:k8=\EOx:\
-	:k9=\EOy:kb=^H:kd=^J:kl=^H:vb=\E[?5l\E[?5h:tc=dt80:
-
-#### Falco
-#
-#	Falco Data Products
-#	440 Potrero Avenue
-#	Sunnyvale, CA 940864-196
-#	Vox: (800)-325-2648
-#	Fax: (408)-745-7860
-#	Net: techsup@charm.sys.falco.com
-#
-# Current Falco models as of 1995 are generally ANSI-compatible and support
-# emulations of DEC VT-series, Wyse, and Televideo types.
-#
-
-# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
-# This terminal was released around 1983 and was discontinued long ago.
-# The standout and underline highlights are the same.
-falco|ts1|ts-1|falco ts-1:\
-	:am:bs:\
-	:co#80:it#8:li#24:\
-	:al=\EE:bl=^G:cd=\EY:ce=\ET\EG0\010:cl=\E*:cm=\E=%+ %+ :\
-	:cr=^M:dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:is=\Eu\E3:\
-	:k0=^A0\r:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:me=\Eg0:nd=^L:\
-	:se=\Eg0:sf=^J:so=\Eg1:ta=^I:ue=\Eg0:up=^K:us=\Eg1:
-falco-p|ts1p|ts-1p|falco ts-1 with paging option:\
-	:am:bs:da:db:mi:ms:ul:\
-	:co#80:it#8:li#24:\
-	:al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET\EG0\010\Eg0:cl=\E*:\
-	:cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=\E[B:ei=\Er:im=\Eq:\
-	:is=\EZ\E3\E_c:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
-	:le=^H:me=\Eg0:nd=\E[C:se=\Eg0:sf=^J:so=\Eg4:ta=^I:te=\E_b:\
-	:ti=\E_d:ue=\Eg0:up=\E[A:us=\Eg1:
-# (ts100: I added <rmam>/<smam> based on the init string -- esr)
-ts100|ts100-sp|falco ts100-sp:\
-	:am:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:vt#3:\
-	:@8=\EOM:DO=\E[%dB:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:K5=\EOn:\
-	:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=\E~E:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:ct=\E[3g:dc=\E~W:dl=\E~R:do=^J:eA=\E(B\E)0:ei=:ho=\E[H:\
-	:i1=\E~)\E~ea:ic=\E~Q:im=:k0=\EOy:k1=\EOP:k2=\EOQ:k3=\EOR:\
-	:k4=\EOS:k5=\EOt:k6=\EOu:k7=\EOv:k8=\EOl:k9=\EOw:k;=\EOx:\
-	:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
-	:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:\
-	:nd=\E[C:rc=\E8:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:..sa=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>:\
-	:sc=\E7:se=\E[m:sf=^J:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:\
-	:ue=\E[m:up=\E[A:us=\E[4m:
-ts100-ctxt|falco ts-100 saving context:\
-	:te=\E~_b:ti=\E~_d\E[2J:tc=ts100:
-
-#### Florida Computer Graphics
-#
-
-# Florida Computer Graphics Beacon System, using terminal emulator program
-# "host.com", as provided by FCG.  This description is for an early release
-# of the "host" program.  Known bug: :cd: clears the whole screen, so it's
-# commented out.
-
-# From: David Bryant <cbosg!djb> 1/7/83
-beacon|FCG Beacon System:\
-	:am:da:db:\
-	:co#80:li#32:\
-	:al=\EE:bl=\ESTART\r\E37\r\EEND\r:ce=\ET:cl=\EZ:\
-	:cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=:ho=\EH:ic=\EQ:\
-	:im=:le=^H:mb=\ESTART\r\E61,1\r\EEND\r:\
-	:me=\ESTART\r\E78\r\E70,0\r\EEND\r:\
-	:mr=\ESTART\r\E59,1\r\EEND\r:nd=\EV:\
-	:se=\ESTART\r\E70,0\r\EEND\r:sf=^J:\
-	:so=\ESTART\r\E70,6\r\EEND\r:te=:\
-	:ti=\ESTART\r\E2,0\r\E12\r\EEND\r:\
-	:ue=\ESTART\r\E60,0\r\EEND\r:up=\EU:\
-	:us=\ESTART\r\E60,1\r\EEND\r:
-
-#### Fluke
-#
-
-# The f1720a differences from ANSI: no auto margin, destructive
-# tabs, # of lines, funny highlighting and underlining
-f1720|f1720a|fluke 1720A:\
-	:xt:\
-	:co#80:li#16:sg#1:ug#1:\
-	:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
-	:do=\E[B:is=\E[H\E[2J:kd=^]:kl=^_:kr=^^:ku=^\:le=^H:me=\E[m:\
-	:nd=\E[C:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ue=\E[m:up=\E[A:\
-	:us=\E[4m:
-
-#### Liberty Electronics (Freedom)
-#
-#	Liberty Electronics
-#	48089 Fremont Blvd
-#	Fremont CA 94538
-#	Vox: (510)-623-6000
-#	Fax: (510)-623-7021
-
-# From: <faletti@berkeley.edu>
-# (f100: added empty <acsc> to suppress a tic warning;
-# made this relative to adm+sgr -- note that <invis> isn't
-# known to work for f100 but does on the f110. --esr)
-f100|freedom|freedom100|freedom model 100:\
-	:am:bs:bw:hs:mi:ms:xo:\
-	:co#80:li#24:\
-	:ac=:ae=\E$:al=\EE:as=\E%%%:bl=^G:bt=\EI:cd=\EY:ce=\ET:\
-	:ch=\E]%+ :cl=^Z:cm=\E=%+ %+ :cr=^M:ct=\E3:cv=\E[%+ :\
-	:dc=\EW:dl=\ER:do=^J:ds=\Eg\Ef\r:ei=\Er:fs=^M:ho=^^:im=\Eq:\
-	:ip=:is=\Eg\Ef\r\Ed:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
-	:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:\
-	:kB=\EI:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:sf=^J:\
-	:sr=\Ej:st=\E1:ta=^I:ts=\Eg\Ef:up=^K:vb=\Eb\Ed:tc=adm+sgr:
-f100-rv|freedom-rv|freedom 100 in reverse video:\
-	:is=\Eg\Ef\r\Eb:vb=\Ed\Eb:tc=f100:
-# The f110 and f200 have problems with vi(1).  They use the ^V
-# code for the down cursor key. When kcud1 is defined in terminfo
-# as ^V, the Control Character Quoting capability (^V in insert mode)
-# is lost! It cannot be remapped in vi because it is necessary to enter
-# a ^V to to quote the ^V that is being remapped!!!
-#
-# f110/f200 users will have to decide whether
-# to lose the down cursor key or the quoting capability. We will opt
-# initially for leaving the quoting capability out, since use of VI
-# is not generally applicable to most interactive applications
-# (f110: added :ta:, :kh: & <kcbt> from f100 -- esr)
-f110|freedom110|Liberty Freedom 110:\
-	:bw@:es:\
-	:it#8:ws#80:\
-	:ae=\E%%%:al=\EE:as=\E$:dl=\ER:do=^V:ds=\Ef\r:ei=\Er\EO:\
-	:im=\EO\Eq:ip@:is@:k0=^AI\r:k;@:kA=\EE:kC=^^:kD=\EW:kE=\ET:\
-	:kI=\EQ:kL=\ER:kS=\EY:mb=\EG2:md=\EG0:mh=\EG@:pf=\Ea:po=\E`:\
-	:so=\EG<:sr=\EJ:ts=\Ef:vb=\Eb\Ed:ve=\E.2:vi=\E.1:vs=\E.2:\
-	:tc=f100:
-f110-14|Liberty Freedom 110 14inch:\
-	:dc@:tc=f110:
-f110-w|Liberty Freedom 110 - 132 cols:\
-	:co#132:tc=f110:
-f110-14w|Liberty Freedom 110 14in/132 cols:\
-	:co#132:\
-	:dc@:tc=f110:
-# (f200: added <acsc> to suppress tic warnings re :as:/:ae: --esr)
-f200|freedom200|Liberty Freedom 200:\
-	:am:bs:es:hs:mi:ms:xo:\
-	:co#80:it#8:li#24:ws#80:\
-	:ac=:ae=\E%%%:al=\EE:as=\E$:bl=^G:bt=\EI:cd=\EY:ce=\ET:\
-	:ch=\E]%+ :cl=^Z:cm=\E=%+ %+ :cr=^M:cs=\Em0%+ %+ :ct=\E3:\
-	:cv=\E[%+ :dc=\EW:dl=\ER:do=^V:ds=\Ef\r:ei=\Er:fs=^M:ho=^^:\
-	:im=\Eq:k0=^AI\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
-	:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:kC=^^:\
-	:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^V:kl=^H:kr=^L:\
-	:ku=^K:le=^H:mb=\EG2:md=\EG0:mh=\EG@:nd=^L:pf=\Ea:po=\E`:\
-	:sf=^J:so=\EG<:sr=\EJ:st=\E1:ts=\Ef:up=^K:vb=\Eo\En:ve=\E.1:\
-	:vi=\E.0:vs=\E.1:tc=adm+sgr:
-f200-w|Liberty Freedom 200 - 132 cols:\
-	:co#132:tc=f200:
-# The f200 has the ability to reprogram the down cursor key. The key is
-# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
-# so powering the terminal off and on will not cause the change to be lost.
-f200vi|Liberty Freedom 200 for vi:\
-	:kd=^J:vb=\Eb\Ed:tc=f200:
-f200vi-w|Liberty Freedom 200 - 132 cols for vi:\
-	:co#132:tc=f200vi:
-
-#### GraphOn (go)
-#
-#	Graphon Corporation
-#	544 Division Street
-#	Campbell, CA 95008
-#	Vox: (408)-370-4080
-#	Fax: (408)-370-5047
-#	Net: troy@graphon.com (Troy Morrison)
-#
-#
-# The go140 and go225 have been discontinued.  GraphOn now makes X terminals,
-# including one odd hybrid that starts out life on power-up as a character
-# terminal, than can be switched to X graphics mode (driven over the serial
-# line) by an escape sequence.  No info on this beast yet.
-# (go140: I added <rmam>/<smam> based on the init string -- esr)
-go140|graphon go-140:\
-	:bs:\
-	:co#80:it#8:li#24:\
-	:RA=\E[?7l:SA=\E[?7h:al=\E[L:cd=10\E[J:ce=\E[K:\
-	:cl=10\E[H\E[2J:cm=\E[%i%2;%2H:dc=\E[P:dl=\E[M:ei=\E[4l:\
-	:if=/usr/share/tabset/vt100:im=\E[4h:\
-	:is=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\EOB:ke=\E[?1l\E>:\
-	:kh=\E[H:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
-	:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\
-	:up=\E[A:us=\E[4m:
-go140w|graphon go-140 in 132 column mode:\
-	:am:\
-	:co#132:\
-	:is=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q:\
-	:tc=go140:
-# Hacked up vt200 termcap to handle GO-225/VT220
-# From: <edm@nwnexus.WA.COM>
-# (go225: I added <rmam>/<smam> based on the init string -- esr)
-go225|go-225|Graphon 225:\
-	:am:bs:mi:xn:\
-	:co#80:it#8:li#25:vt#3:\
-	:RA=\E[?7l:SA=\E[?7h:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=^J:\
-	:ei=\E[4l:ho=\E[H:im=\E[4h:\
-	:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:k1=\EOP:k2=\EOQ:\
-	:k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:\
-	:kr=\E[C:ks=\E=:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
-	:mr=\E[7m:nd=\E[C:r1=\E[!p\E[?7h\E[2;1;1#w:rc=\E8:\
-	:rf=/usr/share/tabset/vt100:sc=\E7:se=\E[27m:sf=\ED:\
-	:so=\E[7m:sr=\EM:ta=^I:te=\E[!p\E[?7h\E[2;1;1#w:\
-	:ti=\E[2;0#w\E[1;25r:ue=\E[24m:up=\E[A:us=\E[4m:
-
-#### Harris (Beehive)
-#
-# Bletch.  These guys shared the Terminal Brain Damage laurels with Hazeltine.
-# Their terminal group is ancient history now (1995) though the parent
-# company is still in business.
-#
-
-# Beehive documentation is undated and marked Preliminary and has no figures
-# so we must have early Superbee2 (Model 600, according to phone conversation
-# with mfr.). It has proved reliable except for some missing padding
-# (notably after \EK and <nl> at bottom of screen).
-#
-# The key idea is that AEP mode is poison for :cm: & that US's in
-# the local memory should be avoided like the plague. That means
-# that the 2048 character local buffer is used as 25 lines of 80
-# characters, period. No scrolling local memory, folks. It also
-# appears that we cannot use naked INS LINE feature since it uses
-# US. The sbi fakes :al: with an 80-space insert that may be too
-# slow at low speeds; also spaces get converted to \040 which is
-# too long for some programs (not vi).  DEL LINE is ok but slow.
-#
-# The <nl> string is designed for last line of screen ONLY; cup to
-# 25th line corrects the motion inherent in scrolling to Page 1.
-#
-# There is one understood bug. It is that the screen appears to
-# pop to a new (blank) page after a :nw:, or leave a half-line
-# ellipsis to a quad that is the extra 48 memory locations. The
-# data received is dumped into memory but not displayed.  Not to
-# worry if :cm: is being used; the lines not displayed will be,
-# whenever the cursor is moved up there. Since :cm: is addressed
-# relative to MEMORY of window, nothing is lost; but beware of
-# relative cursor motion (:up:,:do:,:nd:,:le:). Recommended,
-# therefore, is setenv MORE -c .
-#
-# WARNING: Not all features tested.
-#
-# Timings are assembled from 3 sources. Some timings may reflect
-# SB2/Model 300 that were used if more conservative.
-# Tested on a Model 600 at 1200 and 9600 bd.
-#
-# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
-# placed on the keyboard and useless because of AEP, is made
-# into a backspace key. In use ESC must be pressed twice (to send)
-# and sending ^C must be prefixed by ESC to avoid that weird
-# transmit mode associated with ENTER key.
-#
-# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
-# the screen, then it has dropped into ENTER mode; hit
-# RESET--ONLINE--!tset.
-#
-# As delivered this machine has a FATAL feature that will throw
-# it into that strange transmit state (SPOW) if the space bar is
-# hit after a CR is received, but before receiving a LF (or a
-# few others).
-#
-# The circuits MUST be modified to eliminate the SPOW latch.
-# This is done by strapping on chip A46 of the I/O board; cut
-# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
-# chip. This mod has been checked out on a Mod 600 of Superbee II.
-# With this modification absurdly high timings on cr are
-# unnecessary.
-#
-# NOTE WELL that the rear panel switch should be set to CR/LF,
-# not AEP!
-#
-sb1|beehive superbee:\
-	:am:bs:bw:da:db:mi:ul:xb:\
-	:co#80:li#25:sg#1:ug#1:\
-	:al=\EN\EL\EQ                                                                                \EP \EO\ER\EA:\
-	:bl=^G:bt=\E`:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EF%r%03%03:cr=\r:\
-	:ct=\E3:dc=\EP:dl=\EM:do=^J:ei=\ER:ho=\EH:im=\EQ\EO:\
-	:is=\EE\EX\EZ\EO\Eb\Eg\ER:k0=\E2:k1=\Ep:k2=\Eq:k3=\Er:\
-	:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:k9=\E1:kE=\EK:kI=\EQ\EO:\
-	:kL=\EM:kM=\ER:kS=\EJ:kb=^_:kd=\EB:kh=\EH:kl=\ED:kr=\EC:\
-	:ku=\EA:l0=TAB CLEAR:l9=TAB SET:le=^H:me=\E_3:nd=\EC:\
-	:se=\E_3:sf=^J:so=\E_1:st=\E1:ta=^I:te=:ti=\EO:ue=\E_3:\
-	:up=\EA:us=\E_0:
-sbi|superbee|beehive superbee at Indiana U.:\
-	:xb:\
-	:al=1\EN\EL\EQ \EP \EO\ER\EA:cr=\r:tc=sb1:
-# Alternate (older) description of Superbee - f1=escape, f2=^C.
-# Note: there are at least 3 kinds of superbees in the world.  The sb1
-# holds onto escapes and botches ^C's.  The sb2 is the best of the 3.
-# The sb3 puts garbage on the bottom of the screen when you scroll with
-# the switch in the back set to CRLF instead of AEP.  This description
-# is tested on the sb2 but should work on all with either switch setting.
-# The f1/f2 business is for the sb1 and the :xb: can be taken out for
-# the other two if you want to try to hit that tiny escape key.
-# This description is tricky: being able to use cup depends on there being
-# 2048 bytes of memory and the hairy <nl> string.
-superbee-xsb|beehive super bee:\
-	:am:da:db:xb:\
-	:co#80:it#8:li#25:\
-	:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EF%r%3%3:cr=\r:ct=\E3:dc=\EP:\
-	:dl=\EM:do=^J:ho=\EH:is=\EH\EJ:k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:\
-	:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kd=\EB:kh=\EH:kl=\ED:kr=\EC:\
-	:ku=\EA:le=^H:me=\E_3:nd=\EC:se=\E_3:\
-	:sf=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET:so=\E_1:st=\E1:\
-	:ta=^I:up=\EA:ve=^J:
-# This loses on lines > 80 chars long, use at your own risk
-superbeeic|super bee with insert char:\
-	:ei=\ER:ic=:im=\EQ:tc=superbee-xsb:
-sb2|sb3|fixed superbee:\
-	:xb@:tc=superbee:
-
-####  Beehive Medical Electronics
-#
-# Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
-# Regarding your question though; Beehive terminals weren't made by Harris.
-# They were made by Beehive Medical Electronics in Utah. They went out of
-# business in the early '80s.
-#
-# (OK, then, I don't know why a couple of these say "harris beehive".)
-#
-
-# Reports are that most of these Beehive entries (except superbee) have not
-# been tested and do not work right.  :se: is a trouble spot.  Be warned.
-
-# (bee: :ic: was empty, which is obviously bogus -- esr)
-beehive|bee|harris beehive:\
-	:am:bs:mi:\
-	:co#80:li#24:\
-	:al=\EL:bt=\E>:cd=\EJ:ce=\EK:cl=\EE:cm=\EF%+ %+ :dc=\EP:\
-	:dl=\EM:do=\EB:ei=\E@:ho=\EH:im=\EQ:kA=\EL:kB=\E>:kC=\EE:\
-	:kD=\EP:kE=\EK:kI=\EQ:kL=\EM:kM=\E@:kb=^H:kd=\EB:kh=\EH:\
-	:kl=\ED:kr=\EC:ku=\EA:le=^H:me=\Ed@:nd=\EC:se=\Ed@:so=\EdP:\
-	:ue=\Ed@:up=\EA:us=\Ed`:
-# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
-# good grief - does this entry make :sg:/:ug: when it doesn't have to?
-# look at those spaces in :se:/:so:.  Seems strange to me...
-# (beehive: :if=/usr/share/tabset/beehive: removed, no such file.  If you
-# really care, cook up one using ^F -- esr)
-beehive3|bh3m|beehiveIIIm|harris beehive 3m:\
-	:am:bs:\
-	:co#80:it#8:li#20:\
-	:al=\023:bl=^G:cd=^R:ce=^P:cl=^E^R:cr=^M:dl=\021:do=^J:ho=^E:\
-	:le=^H:ll=^E^K:nd=^L:se=\s^_:sf=^J:so=^]\s:st=^F:ta=^I:up=^K:
-beehive4|bh4|beehive 4:\
-	:am:\
-	:co#80:li#24:\
-	:bl=^G:cd=\EJ:ce=\EK:cl=\EE:cr=^M:do=^J:ho=\EH:le=\ED:nd=\EC:\
-	:sf=^J:up=\EA:
-# There was an early Australian kit-built computer called a "Microbee".
-# It's not clear whether this is for one of those or for a relative
-# of the Beehive.
-microb|microbee|micro bee series:\
-	:am:bs:\
-	:co#80:it#8:li#24:\
-	:bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EF%+ %+ :cr=^M:do=^J:k1=\Ep:\
-	:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:k9=\Ex:\
-	:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:me=\Ed@:nd=\EC:\
-	:se=\Ed@:sf=^J:so=\s\EdP:ta=^I:ue=\Ed@:up=\EA:us=\Ed`:
-
-# 8675, 8686, and bee from Cyrus Rahman
-# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
-ha8675|harris 8675:\
-	:F1=^W:F2=\ER:F3=\EE:F4=\EI:F5=\Ei:F6=\Eg:\
-	:is=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU:k1=^F:k2=^P:k3=^N:\
-	:k4=^V:k5=^J:k6=^T:k7=^H:k8=\177:k9=\Ee:k;=\Ed:tc=bee:
-# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
-# in :is: -- esr)
-ha8686|harris 8686:\
-	:F1=\EW:F2=\002\E{\003:F3=\002\E|\003:F4=\002\E}\003:\
-	:F5=\002\E~\003:F6=\002\E\177\003:\
-	:is=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#:\
-	:k1=\002\Ep\003:k2=\002\Eq\003:k3=\002\Er\003:\
-	:k4=\002\Es\003:k5=\E3:k6=\EI:k7=\ER:k8=\EJ:k9=\E(:k;=\Ej:\
-	:tc=bee:
-
-#### Hazeltine
-#
-# Hazeltine appears to be out of the terminal business as of 1995.  These
-# guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
-# Harris. They have a hazeltine.com domain (but no web page there ) and can
-# be reached at:
-#
-#	Hazeltine
-#	450 East Pulaski Road
-#	Greenlawn, New York 11740
-#
-# As late as 1993, manuals for the terminal product line could still be
-# purchased from:
-#
-#	TRW Customer Service Division
-#	15 Law Drive
-#	P.O. Box 2076
-#	Fairfield, NJ 07007-2078
-#
-# They're now (1998) a subsidiary of General Electric, operating under the
-# marque "GEC-Marconi Hazeltine" and doing military avionics.  Web page
-# at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
-#
-
-# Since :nd: is blank, when you want to erase something you
-# are out of luck.  You will have to do ^L's a lot to
-# redraw the screen.  h1000 is untested.  It doesn't work in
-# vi - this terminal is too dumb for even vi.  (The code is
-# there but it isn't debugged for this case.)
-hz1000|hazeltine 1000:\
-	:bs:\
-	:co#80:li#12:\
-	:bl=^G:cl=^L:cr=^M:do=^J:ho=^K:le=^H:nd=\s:sf=^J:
-# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
-hz1420|hazeltine 1420:\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\E^Z:bl=^G:cd=\E^X:ce=\E^O:cl=\E^\:cm=\E\021%r%.%+ :\
-	:cr=^M:dl=\E^S:do=^J:le=^H:nd=^P:se=\E^Y:sf=^J:so=\E^_:ta=^N:\
-	:up=\E^L:
-# New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>.  Prevents
-# freakout with out-of-range args and tn3270.  No hz since it needs to
-# receive tildes.
-hz1500|hazeltine 1500:\
-	:am:bs:hz:\
-	:co#80:li#24:\
-	:al=~\032:bl=^G:cd=~\030:ce=~^O:cl=~^\:\
-	:cm=~\021%r%>^^ %+`%+`:cr=^M:dl=~\023:do=~^K:ho=~^R:kd=^J:\
-	:kh=~^R:kl=^H:kr=^P:ku=~^L:le=^H:nd=^P:se=~^Y:sf=^J:so=~^_:\
-	:up=~^L:
-# h1510 assumed to be in sane escape mode.  Else use h1500.
-# (h1510: early versions of this entry apparently had ":se=\E^_:,
-# :so=\E^Y:, but these caps were commented out in 8.3; also,
-# removed incorrect and overridden ":do=^J:" -- esr)
-hz1510|hazeltine 1510:\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\E^Z:bl=^G:cd=\E^X:ce=\E^O:cl=\E^\:cm=\E\021%r%.%.:\
-	:cr=^M:dl=\E^S:do=\E^K:le=^H:nd=^P:sf=^J:up=\E^L:
-# Hazeltine 1520
-# The following switch settings are assumed for normal operation:
-#	FULL		CR		U/L_CASE	ESCAPE
-#	FORMAT_OFF	EOM_A_OFF	EOM_B_OFF	WRAPAROUND_ON
-# Other switches may be set for operator convenience or communication
-# requirements.
-hz1520|Hazeltine 1520:\
-	:am:bs:bw:ms:\
-	:co#80:li#24:\
-	:al=\E^Z:bl=^G:cd=\E^X:ce=\E^O:cl=\E^\:cm=\E\021%r%.%.:\
-	:cr=^M:dl=\E^S:do=^J:ho=\E^R:kA=\E^Z:kC=\E^\:kE=\E^O:\
-	:kL=\E^S:kS=\E^X:kb=^H:kd=\E^K:kh=\E^R:kl=^H:kr=^P:ku=\E^L:\
-	:le=^H:md=\E^_:me=\E^Y:nd=^P:r1=\E$\E\005\E?\E\031:\
-	:se=\E^Y:sf=^J:so=\E^_:up=\E^L:
-# This version works with the escape switch off
-# (h1520: removed incorrect and overridden ":do=^J:" -- esr)
-hz1520-noesc|hazeltine 1520:\
-	:am:hz:\
-	:co#80:li#24:\
-	:al=~^Z:bl=^G:cd=~^X:ce=~^O:cl=~^\:cm=~\021%r%.%.:cr=^M:\
-	:dl=~^S:do=~^K:ho=~^R:le=^H:nd=^P:se=~^Y:sf=^J:so=~^_:up=~^L:
-# Note: the h1552 appears to be the first Hazeltine terminal which
-# is not braindamaged.  It has tildes and backprimes and everything!
-# Be sure the auto lf/cr switch is set to cr.
-hz1552|hazeltine 1552:\
-	:bs:\
-	:al=\EE:dl=\EO:do=^J:k1=\EP:k2=\EQ:k3=\ER:l1=blue:l2=red:\
-	:l3=green:tc=vt52:
-hz1552-rv|hazeltine 1552 reverse video:\
-	:do=^J:se=\ET:so=\ES:tc=hz1552:
-# Note: h2000 won't work well because of a clash between upper case and ~'s.
-hz2000|hazeltine 2000:\
-	:am:bs:nc:\
-	:co#74:li#27:\
-	:al=~\032:bl=^G:cl=~\034:cm=~\021%r%.%.:dl=~\023:do=^J:\
-	:ho=~^R:le=^H:pc=\177:sf=^J:
-# Date: Fri Jul 23 10:27:53 1982.  Some unknown person wrote:
-# I tested this termcap entry for the Hazeltine Esprit with vi. It seems
-# to work ok. There is one problem though if one types a lot of garbage
-# characters very fast vi seems not able to keep up and hangs while trying
-# to insert. That's in insert mode while trying to insert in the middle of
-# a line. It might be because the Esprit doesn't have insert char and delete
-# char as a built in function. Vi has to delete to end of line and then
-# redraw the rest of the line.
-esprit|Hazeltine Esprit I:\
-	:am:bs:bw:\
-	:co#80:li#24:\
-	:al=\E^Z:bl=^G:bt=\E^T:cd=\E^W:ce=\E^O:cl=\E^\:\
-	:cm=\E\021%r%.%.:cr=^M:dl=\E^S:do=\E^K:ho=\E^R:is=\E?:\
-	:k0=^B0^J:k1=^B1^J:k2=^B2^J:k3=^B3^J:k4=^B4^J:k5=^B5^J:\
-	:k6=^B6^J:k7=^B7^J:k8=^B8^J:k9=^B9^J:kb=^H:kd=\E^K:ke=\E>:\
-	:kh=\E^R:kl=^H:kr=^P:ks=\E<:ku=\E^L:l0=0:l1=1:l2=2:l3=3:l4=4:\
-	:l5=5:l6=6:l7=7:l8=8:l9=9:le=^H:nd=^P:se=\E^Y:sf=^J:so=\E^_:\
-	:up=\E^L:
-esprit-am|hazeltine esprit auto-margin:\
-	:am:tc=esprit:
-# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
-# Vi it seems always wants to send a control J for "do" and it turned out
-# that the terminal would work somewhat if the auto LF/CR was turned off.
-# (hmod1: removed :dn=~^K: -- esr)
-hmod1|Hazeltine Modular 1:\
-	:am:bs:hz:\
-	:co#80:li#24:\
-	:al=~^Z:bl=^G:bt=~^T:cl=~^\:cm=~\021%r%.%.:cr=^M:dl=~^S:\
-	:do=~^K:ho=~^R:kd=~^K:kh=~^R:kl=^H:kr=^P:ku=~^L:le=^H:me=~^Y:\
-	:nd=^P:rc=~^Q:sc=~^E:se=~^Y:sf=^J:so=~^_:up=~^L:
-#
-# Hazeltine Executive 80 Model 30 (1554?)
-#	from  Will Martin <control@ALMSA-1.ARPA> via BRL
-# Like VT100, except for different "am" behavior.
-hazel|exec80|h80|he80|Hazeltine Executive 80:\
-	:am:bs:pt:\
-	:co#80:it#8:li#24:vt#3:\
-	:bl=^G:cd=50\E[J:ce=3\E[K:cl=50\E[;H\E[2J:\
-	:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:do=^J:ho=\E[H:\
-	:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
-	:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
-	:ku=\EOA:le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:\
-	:nd=2\E[C:nl=^J:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:rc=\E8:rf=/usr/share/tabset/vt100:sc=\E7:se=2\E[m:\
-	:so=2\E[7m:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:us=2\E[4m:
-
-#### IBM
-#
-
-ibm327x|line mode IBM 3270 style:\
-	:gn:\
-	:ce=^M:cl=^M^J:ho=^M:
-
-ibm3101|i3101|IBM 3101-10:\
-	:am:bs:xo:\
-	:co#80:li#24:\
-	:bl=^G:cd=\EJ:ce=\EI:cl=\EK:cm=\EY%+ %+ :cr=^M:ct=\EH:do=^J:\
-	:ho=\EH:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:nw=^M^J:\
-	:sf=^J:st=\E0:up=\EA:
-ibm3151|IBM 3151 display:\
-	:ae=\E>B:as=\E>A:is=\E S:me=\E4@\E>B:rs=\E S:s0=\E>B:\
-	:..sa=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;:\
-	:te=\E>B:ti=\E>B:tc=ibm3162:
-# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
-# removed kend, knp, kpp -TD
-ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display:\
-	:am:bs:mi:ms:\
-	:co#80:it#8:li#24:\
-	:F1=\Ek\r:F2=\El\r:F3=\E!a\r:F4=\E!b\r:F5=\E!c\r:\
-	:F6=\E!d\r:F7=\E!e\r:F8=\E!f\r:F9=\E!g\r:FA=\E!h\r:\
-	:FB=\E!i\r:FC=\E!j\r:FD=\E!k\r:FE=\E!l\r:\
-	:ac=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370:\
-	:bl=^G:cd=\EJ:ce=\EI:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:dc=\EQ:\
-	:dl=\EO:do=\EB:ho=\EH:k1=\Ea\r:k2=\Eb\r:k3=\Ec\r:k4=\Ed\r:\
-	:k5=\Ee\r:k6=\Ef\r:k7=\Eg\r:k8=\Eh\r:k9=\Ei\r:k;=\Ej\r:\
-	:kA=\EN:kB=\E2:kC=\EL\r:kD=\EQ:kE=\EI:kI=\EP \010:kL=\EO:\
-	:kS=\EJ:kT=\E0:ka=\E 1:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:\
-	:kt=\E1:ku=\EA:le=\ED:mb=\E4D:md=\E4H:me=\E4@\E<@:mk=\E4P:\
-	:mr=\E4A:nd=\EC:pf=^P^T:po=^P^R:\
-	:..sa=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;:\
-	:se=\E4@:sf=^J:so=\E4A:te=\E>A:ti=\E>A:ue=\E4@:up=\EA:\
-	:us=\E4B:
-
-ibm3161-C|IBM 3161-C NLS terminal using cartridge:\
-	:s0=\E>B:s1=\E>A:te=\E>B:ti=\E>B:tc=ibm3161:
-ibm3162|IBM 3162 display:\
-	:al=\EN:mb=\E4$a:md=\E4(a:me=\E4@:mk=\E40a:mr=\E4!a:\
-	:se=\E4>b:so=\E4!a:ue=\E4=b:us=\E4"a:tc=ibm3161-C:
-
-# This really should not use setab/setaf, but it is clear that the
-# original terminfo does not toggle red/blue colors as in setb/setf.
-ibm3164|i3164|IBM 3164:\
-	:ms:\
-	:Co#8:pa#64:\
-	:AB=\E4  %+@:..AF=\E4%?%p1%t %p1%{32}%+%c%e!'%;@:\
-	:op=\E4 "@:s0=\E>B:s1=\E>A:te=\E!9(N\E>B:ti=\E!9/N\E>B:\
-	:tc=ibm3161:
-
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display:\
-	:am:bw:ms:xo:\
-	:co#80:it#8:li#25:\
-	:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
-	:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:\
-	:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
-	:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:is=\Ec:\
-	:k1=\E[001q:k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:\
-	:k6=\E[006q:k7=\E[007q:k8=\E[008q:k9=\E[009q:kD=\E[P:\
-	:kI=\E[139q:kN=\E[154q:kP=\E[150q:kb=^H:kd=\E[B:kh=\E[H:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
-	:mr=\E[7m:nd=\E[C:rs=\Ec:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\
-	:ue=\E[m:up=\E[A:us=\E[4m:
-
-ibmaed|IBM Experimental display:\
-	:am:bs:eo:ms:\
-	:co#80:it#8:li#52:\
-	:al=\EN:cd=\EJ:ce=\EI:cl=\EH\EK:cm=\EY%+ %+ :dc=\EQ:dl=\EO:\
-	:do=\EB:ei=:ho=\EH:ic=\EP:im=:kb=^H:kd=\EB:kl=\ED:kr=\EC:\
-	:ku=\EA:le=^H:me=\E0:nd=\EC:se=\E0:so=\E0:ta=^I:up=\EA:\
-	:vb=\EG:
-ibm-apl|apl|IBM apl terminal simulator:\
-	:li#25:tc=dm1520:
-# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
-# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
-ibmmono|IBM workstation monochrome:\
-	:es:hs:\
-	:al=\EL:dl=\EM:ds=\Ej\EY8 \EI\Ek:fs=\Ek:k0=\E<:k1=\ES:\
-	:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:k9=\EY:\
-	:kF=\EE:kI=\0:kN=\EE:kP=\Eg:kR=\EG:kb=^H:kh=\EH:l0=f10:\
-	:md=\EZ:me=\Ew\Eq\Ez\EB:mk=\EF\Ef0;\Eb0;:mr=\Ep:se=\Ez:\
-	:so=\EZ:sr=\EA:..ts=\Ej\EY8%+ \Eo:ue=\Ew:us=\EW:\
-	:tc=ibm3101:
-ibmega|IBM Enhanced Color Display:\
-	:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:\
-	:tc=ibmmono:
-# This color scheme is assumed in some recent IBM terminal descriptions
-# (green on black, emulated on a 16-color terminal).
-ibm+color|IBM color definitions:\
-	:Co#8:NC#3:pa#64:\
-	:..Sb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;:\
-	:..Sf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;:\
-	:op=\E[32m\E[40m:
-ibm5154|IBM 5154 Color display:\
-	:Co#8:NC@:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:md@:tc=ibm5151:tc=ibm+color:
-ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline:\
-	:se=\EB:so=\EF\Ef3;:ue=\EB:us=\EF\Ef2;:tc=ibmmono:
-ibmvga-c|IBM VGA display color termcap:\
-	:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:\
-	:tc=ibmega-c:
-ibmvga|IBM VGA display:\
-	:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:tc=ibmega:
-# ibmapa* and ibmmono entries come from ACIS 4.3 distribution
-rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display:\
-	:li#32:\
-	:ds=\Ej\EY@ \EI\Ek:..ts=\Ej\EY@%+ \Eo:tc=ibmmono:
-ibm6155|IBM 6155 Black & White display:\
-	:mb@:md@:tc=ibm5151:
-# Advanced Monochrome (6153) and Color (6154) Graphics Display:
-ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display:\
-	:li#31:\
-	:ds=\Ej\EY? \EI\Ek:..ts=\Ej\EY?%+ \Eo:tc=ibmmono:
-ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display:\
-	:li#31:\
-	:ds=\Ej\EY? \EI\Ek:mh=\EF\Ef7;:..ts=\Ej\EY?%+ \Eo:\
-	:tc=ibmega-c:
-ibm6154|IBM 6154 Color displays:\
-	:mb@:md=\E[12m:me=\E[0;10m:s0=\E[10m:s1=\E[11m:s2=\E[12m:\
-	:..sa=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m:\
-	:tc=ibm5154:
-ibm6153|IBM 6153 Black & White display:\
-	:mb@:md=\E[12m:me=\E[0;10m:s0=\E[10m:s1=\E[11m:s2=\E[12m:\
-	:..sa=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m:\
-	:tc=ibm5151:
-ibm6153-90|IBM 6153 Black & White display:\
-	:co#90:li#36:\
-	:mb@:md@:tc=ibm5151:
-ibm6153-40|IBM 6153 Black & White display:\
-	:co#40:li#12:tc=ibm6153-90:
-ibm8512|ibm8513|IBM color VGA Terminal:\
-	:am:mi:ms:\
-	:co#80:it#8:li#25:\
-	:AL=\E[%dL:DL=\E[%dM:RA=\E[?7l:SA=\E[?7h:\
-	:ac=jjkkllmmnnqqttuuvvwwxx:ae=^O:al=\E[L:as=^N:cd=\E[J:\
-	:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:dl=\E[M:dm=\E[4h:\
-	:do=^J:ec=\E[%dX:ed=\E[4l:ei=\E[4l:ho=\E[H:im=\E[4h:\
-	:is=\Eb\E[m\017\E[?7h:k0=\E[010q:k1=\E[001q:k2=\E[002q:\
-	:k3=\E[003q:k4=\E[004q:k5=\E[005q:k6=\E[006q:k7=\E[007q:\
-	:k8=\E[008q:k9=\E[009q:kd=\E[B:kh=\E[H:ku=\E[A:le=\E[D:\
-	:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
-	:r1=\Eb\E[m\017\E[?7h\E[H\E[J:rc=\E[u:sc=\E[s:se=\E[m:\
-	:so=\E[7m:te=\E[20h:ti=\E[20;4l\E[?7h\Eb:ue=\E[m:up=\E[A:\
-	:us=\E[4m:tc=ibm8503:
-hft-c|HFT with Color:\
-	:Co#8:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:ac=jjkkllmmnnqqttuuvvwwxx:\
-	:me=\E[0m\E(B:s0=\E(B:s1=\E(0:tc=ibm5151:tc=ibm+color:
-hft-c-old|HFT with Color PC850:\
-	:Co#8:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:tc=ibm5151:tc=ibm+color:
-hft-old|AIWS High Function Terminal:\
-	:am:xo:\
-	:co#80:li#25:\
-	:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
-	:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=\E6:ho=\E[H:ic=\E[@:im=\E6:\
-	:k1=\E[001q:k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:\
-	:k6=\E[006q:k7=\E[007q:k8=\E[008q:k9=\E[009q:kN=\E[153q:\
-	:kP=\E[159q:ka=\E[010q:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
-	:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mk=\E[8m:\
-	:mr=\E[7m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:ta=^I:ue=\E[m:\
-	:up=\E[A:us=\E[4m:tc=ibm+color:
-ibm-system1|system1|ibm system/1 computer:\
-	:am:xt:\
-	:co#80:li#24:\
-	:bl=^G:cl=^Z:cm=\005%+ %+ :ho=^K:le=^H:nd=^\:sf=^J:up=^^:
-#       lft-pc850 : IBM Low Function Terminal Device
-#    lft "supports" underline, bold, and blink in the sense that the lft code
-#    sets all the right bits.  HOWEVER, depending upon the adapter, these
-#    attributes may or may not be supported by the device driver.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device:\
-	:am:bw:ms:xo:\
-	:co#80:it#8:li#25:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
-	:ae=\E(B:al=\E[L:as=\E(0:bl=^G:bt=\E[Z:cd=\E[2J:ce=\E[0K:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dc=\E[P:\
-	:dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:is=\Ec:\
-	:k1=\E[001q:k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:\
-	:k6=\E[006q:k7=\E[007q:k8=\E[008q:k9=\E[009q:kD=\E[P:\
-	:kI=\E[139q:kN=\E[154q:kP=\E[150q:kb=^H:kd=\E[B:kh=\E[H:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
-	:mr=\E[7m:nd=\E[C:rs=\Ec:se=\E[0m:sf=\ED:so=\E[7m:sr=\EL:\
-	:ue=\E[0m:up=\E[A:us=\E[4m:
-ibm5081|hft|IBM Megapel Color display:\
-	:ac=jjkkllmmnnqqttuuvvwwxx:mb@:md@:me=\E[0m\E(B:s0=\E(B:\
-	:s1=\E(0:tc=ibm5154:
-ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display:\
-	:es:hs:\
-	:li#33:\
-	:ds=\Ej\EYA \EI\Ek:fs=\Ek:..ts=\Ej\EYA%+ \Eo:\
-	:tc=ibmega-c:
-ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display:\
-	:tc=hft-c:
-ibm8514|IBM 8514/a color VGA display:\
-	:es:hs:\
-	:ds=\Ej\EYI \EI\Ek:fs=\Ek:..ts=\Ej\EYI%+ \Eo:tc=hft:
-ibm8514-c|IBM 8514 color display with standout and underline:\
-	:es:hs:\
-	:li#41:\
-	:cr=^M:do=^J:ds=\Ej\EYI \EI\Ek:fs=\Ek:kb=^H:kd=^J:kl=^H:\
-	:nw=^M^J:sf=^J:ta=^I:..ts=\Ej\EYI%+ \Eo:tc=ibmega-c:
-
-#
-# AIX entries.  IBM ships these with AIX 3.2.5.
-# -- added rc, sc based on manpage -TD
-aixterm|IBM Aixterm Terminal Emulator:\
-	:es:hs:\
-	:ac=jjkkllmmnnqqttuuvvwwxx:ds=\E[?E:fs=\E[?F:md=\E[1m:\
-	:me=\E[0;10m\E(B:rc=\E8:s0=\E(B:s1=\E(0:\
-	:..sa=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;:\
-	:sc=\E7:sr@:ts=\E[?%dT:tc=ibm6154:
-aixterm-m|IBM AIXterm Monochrome Terminal Emulator:\
-	:es:hs:\
-	:ac=jjkkllmmnnqqttuuvvwwxx:ds=\E[?E:fs=\E[?F:md=\E[1m:\
-	:me=\E[0;10m\E(B:s0=\E(B:s1=\E(0:\
-	:..sa=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m:\
-	:sr@:ts=\E[?%dT:tc=ibm6153:
-aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator:\
-	:es:hs:\
-	:ds=\E[?E:fs=\E[?F:md=\E[1m:\
-	:..sa=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m:\
-	:sr@:ts=\E[?%dT:tc=ibm6153:
-jaixterm|IBM Kanji Aixterm Terminal Eemulator:\
-	:ac@:tc=aixterm:
-jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator:\
-	:ac@:tc=aixterm-m:
-
-#### Infoton/General Terminal Corp.
-#
-
-# gt100 sounds like something DEC would come out with.  Let's hope they don't.
-i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100):\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=^L:cm=\Ef%r%+ %+ :cr=^M:\
-	:dl=\EM:do=^J:ho=\EH:le=^H:nd=\EC:se=\Ea:sf=^J:so=\Eb:up=\EA:\
-	:vb=\Eb\Ea:
-i400|infoton 400:\
-	:am:bs:\
-	:co#80:li#25:\
-	:al=\E[L:bl=^G:ce=\E[N:cl=\E[2J:cm=%i\E[%3;%3H:cr=^M:\
-	:dc=\E[4h\E[2Q\E[P\E[4l\E[0Q:dl=\E[M:do=^J:\
-	:ei=\E[4l\E[0Q:im=\E[4h\E[2Q:le=^H:nd=\E[C:sf=^J:up=\E[A:
-# (addrinfo: removed obsolete ":bc=^Z:" -- esr)
-addrinfo:\
-	:am:\
-	:co#80:li#24:\
-	:bl=^G:cd=^K:cl=^L:..cm=\037%p1%{1}%-%c%p2%{1}%-%c:cr=^M:\
-	:do=^J:ho=^H:le=^Z:ll=^H^\:nd=^Y:sf=^J:up=^\:
-# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
-infoton:\
-	:am:\
-	:co#80:li#24:\
-	:bl=^G:cd=^K:cl=^L:cr=^M:do=^J:le=^Z:ll=^H^\:nd=^Y:sf=^J:\
-	:up=^\:
-
-# The ICL6402 was actually the Kokusai Display System 6402.
-# The 6404 was the KDS7372 (color version of the 6402).
-#
-# ICL6404 control codes follow:
-#
-#code            function
-#~~~~~~~~~~~     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#ctrl-A          set SOM position at cursor position
-#ctrl-G          Bell
-#ctrl-H          Backspace
-#ctrl-I          Horiz tab
-#ctrl-J          Linefeed
-#ctrl-K          Cursor up
-#ctrl-L          Cursor right
-#ctrl-M          Carriage return
-#ctrl-N          Disable xon/xoff to host
-#ctrl-O          Enable xon/xoff to host
-#ctrl-R          Enable bidirectional mode
-#ctrl-T          Disable bidirectional mode
-#ctrl-V          Cursor down
-#ctrl-Z          Clear unprotected data to insert char
-#ctrl-^          Cursor home
-#ctrl-_          Newline
-#
-#ESC             lead-in char for multiple character command
-#
-#ESC space R     execute power on sequence
-#ESC ! p1 p2     define scroll region:
-#                p1 = scroll top    line:  20h - 37h
-#                p1 = scroll bottom line:  20h - 37h
-#ESC "           unlock keyboard
-#ESC #           lock keyboard
-#ESC $           Semi-graphics mode on
-#ESC %           Semi-graphics mode off
-#ESC &           protect mode on
-#ESC '           protect mode off
-#ESC (           write protect mode off (full intensity)
-#ESC )           write protect mode on (half intensity)
-#
-#ESC *           clear screen
-#ESC +           clear unprotected data to insert char
-#ESC ,           clear unprotected data to half intensity spaces
-#ESC - p1 p2 p3 p4     address cursor to page, row, column:
-#                      p1 = page number  0 - 3
-#                      p2 = row          20h - 7fh
-#                      p3 = column (lo)  20h - 7fh
-#                      p4 = column (hi)  20h - 21h (only 132 col)
-#ESC . p1        set cursor style:
-#                p1 = 0  invisible cursor
-#                p1 = 1  block blinking cursor
-#                p1 = 2  block steady cursor
-#                p1 = 3  underline blinking cursor
-#                p1 = 4  underline steady cursor
-#ESC /           transmit cursor location (page, row, column)
-#ESC 0 p1 p2 p3 p4     program edit key:
-#                      p1 = edit key code: '@'-'S', '`'-'s'
-#                      p2 p3 p4 = program data (3 bytes)
-#
-#ESC 1           set tab
-#ESC 2           clear tab at cursor
-#ESC 3           clear all tabs
-#ESC 4           send unprotect line to cursor
-#ESC 5           send unprotect page to cursor
-#ESC 6           send line to cursor
-#ESC 7           send page to cursor
-#ESC 8 n         set scroll mode:
-#                n = 0   set jump scroll
-#                n = 1   set smooth scroll
-#ESC 9 n         control display:
-#                n = 0   display off
-#                n = 1   display on
-#ESC :           clear unprotected data to null
-#ESC ;           clear unprotected data to insert char
-#
-#ESC <           keyclick on
-#ESC = p1 p2     address cursor to row, column
-#                p1 = row          20h - 7fh
-#                p2 = column (lo)  20h - 7fh
-#                p3 = column (hi)  20h - 21h (only 132 col)
-#ESC >           keyclick off
-#ESC ?           transmit cursor location (row, column)
-#
-#ESC @           copy print mode on
-#ESC A           copy print mode off
-#ESC B           block mode on
-#ESC C           block mode off (conversation mode)
-#ESC D F         set full duplex
-#ESC D H         set half duplex
-#ESC E           line insert
-#ESC F p1 p2     set page color (p1 = f/grnd, p2 = b/grnd)
-#                0 = black, 1 = red,     2 = green, 3 = yellow
-#                4 = blue,  5 = magenta, 6 = cyan,  7 = white
-#ESC G n         set serial field attribute (n = 30h - 3Fh)
-#ESC H n         full graphics mode:
-#                n = 0  exit full graphics mode
-#                n = 1  enter full graphics mode
-#ESC I           back tab
-#ESC J           back page
-#ESC K           forward page
-#
-#ESC L           unformatted page print
-#ESC M L         move window left  (132 col mode only)
-#ESC M R         move window right (132 col mode only)
-#ESC N           set page edit (clear line edit)
-#ESC O           set line edit (clear page edit)
-#ESC P           formatted page print
-#ESC Q           character insert
-#ESC R           line delete
-#ESC S           send message unprotected only
-#ESC T           erase line to insert char
-#ESC U           set monitor mode   (see ESC X, ESC u)
-#
-#ESC V n         select video attribute mode:
-#                n = 0   serial field attribute mode
-#                n = 1   parallel character attribute mode
-#ESC V 2 n       define line attribute:
-#                n = 0   single width single height
-#                n = 1   single width double height
-#                n = 2   double width single height
-#                n = 3   double width double height
-#ESC V 3 n       select character font:
-#                n = 0   system font
-#                n = 1   user defined font
-#ESC V 4 n       select screen mode:
-#                n = 0   page screen mode
-#                n = 1   virtual screen mode
-#ESC V 5 n       control mouse mode:
-#                n = 0   disable mouse
-#                n = 1   enable sample mode
-#                n = 2   send mouse information
-#                n = 3   enable request mode
-#ESC W           character delete
-#ESC X           clear monitor mode (see ESC U, ESC u)
-#ESC Y           erase page to insert char
-#
-#ESC Z n         send user/status line:
-#                n = 0   send user line
-#                n = 1   send status line
-#                n = 2   send terminal ID
-#ESC [ p1 p2 p3  set character attribute (parallel char mode):
-#                p1: 0 = normal
-#                    1 = blank
-#                    2 = blink
-#                    3 = blink blank (= blank)
-#                    4 = reverse
-#                    5 = reverse blank
-#                    6 = reverse blink
-#                    7 = reverse blink blank (= reverse blank)
-#                    8 = underline
-#                    9 = underline blank
-#                    : = underline blink
-#                    ; = underline blink blank
-#                    < = reverse underline
-#                    = = reverse underline blank
-#                    > = reverse underline blink
-#                    ? = reverse underline blink blank
-#                p2, p3: f/grnd, b/grnd color
-#                (see ESC F for colors)
-#                use ZZ for mono, eg.
-#                    ESC [ 0 Z Z for normal
-#                    ESC [ 4 Z Z for inverse etc.
-#
-#ESC \ n         set page size:
-#                n = 1   24 lines/page
-#                n = 2   48 lines/page
-#                n = 3   72 lines/page
-#                n = 4   96 lines/page
-#ESC ] n         set Wordstar mode:
-#                n = 0   normal (KDS7372) mode
-#                n = 1   Wordstar mode
-#
-#ESC b           set foreground color screen
-#
-#ESC c n         enter self-test mode:
-#                n = 0   exit self test mode
-#                n = 1   ROM test
-#                n = 2   RAM test
-#                n = 3   NVRAM test
-#                n = 4   screen display test
-#                n = 5   main/printer port test
-#                n = 6   mouse port test
-#                n = 7   graphics board test
-#                n = 8   graphics memory test
-#                n = 9   display all 'E'
-#                n = :   display all 'H'
-#ESC d           set background color screen
-#
-#ESC e n         program insert char (n = insert char)
-#ESC f text CR   load user status line with 'text'
-#
-#ESC g           display user status line on 25th line
-#ESC h           display system status line on 25th line
-#ESC i           tab
-#ESC j           reverse linefeed
-#ESC k n         duplex/local edit mode:
-#                n = 0   duplex edit mode
-#                n = 1   local edit mode
-#ESC l n         select virtual screen:
-#                n = 0   screen 1
-#                n = 1   screen 2
-#ESC m           save current config to NVRAM
-#ESC n p1        select display screen:
-#                p1 = 0  screen 1
-#                p1 = 1  screen 2
-#                p1 = 2  screen 3
-#                p1 = 3  screen 4
-#ESC o p1 p2     set characters/line and attribute:
-#                p1 = 0  80 chars/line
-#
-#ESC o p1 p2     set characters/line and attribute:
-#                p1 = 0  80 chars/line
-#                p1 = 1  132 chars/line
-#                p2 = 0  single width single height
-#                p2 = 1  single width double height
-#                p2 = 2  double width single height
-#                p2 = 3  double width double height
-#
-#ESC q           insert mode on
-#ESC r           edit mode on
-#ESC s           send message all
-#ESC t           erase line to null
-#ESC u           clear monitor mode (see ESC U, ESC X)
-#ESC v           autopage mode on
-#ESC w           autopage mode off
-#ESC x p1 p2 p3  define delimiter code...
-#ESC y           erase page to null
-#
-#ESC z 2 p1 p2 p3 p4   draw quadrangle:
-#                      p1 = starting row
-#                      p2 = starting column
-#                      p3 = end row
-#                      p4 = end column
-#
-#ESC { p1 p2 p3 p4     configure main port
-#                      (baud, stop bits, parity, word length)
-#
-#ESC | p1 p2 text Ctrl-Y    program function key with 'text':
-#                        p1 = function key code:
-#                             '1' - ';'  normal f1- f11
-#                             '<' - 'F'  shifted f1 - f11
-#                        p2 = program mode:
-#                             1 = FDX
-#                             2 = LOC
-#                             3 = HDX
-#                        Ctrl-Y = terminator
-#                        (use Ctrl-P to escape ^P, ^Y )
-#
-#ESC } p1 p2 p3 p4     configure printer port
-#                      (baud, stop bits, parity, word length)
-#ESC ~           send system status
-#
-# Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
-#
-# Entry is by esr going solely on above information and is UNTESTED.
-# This actually looks a lot like a Televideo 9xx.
-# This entry uses page 0 and is monochrome; I'm not brave enough to try
-# to make color work without a test terminal.  The :am: capability is a guess.
-# The initialization string sets conversation mode, blinking underline cursor,
-# full duplex, parallel attribute mode, display user status line, white
-# foreground, black background, normal highlight.
-#
-icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372:\
-	:am:bs:hs:\
-	:co#80:li#24:\
-	:al=\EE:bl=^G:bt=\EI:cl=\E*:cm=\E=%+ %+P%+P:cr=^M:\
-	:..cs=\E!%+%p1%{32}%+%p2%{32} cud1=\026:ct=\E3:dc=\EW:\
-	:dl=\ER:ei=\Er:ho=^^:i1=\EC\E.3\EDF\EV1\Eg\E[0ZZ:im=\Eq:\
-	:mb=\E[2ZZ:me=\E[0ZZ:mk=\E[1ZZ:mr=\E[4ZZ:nd=^L:nw=^_:\
-	:rs=\Eo1:\
-	:..sa=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ:\
-	:se=\E[%gh%{4}%^%Ph%gh%dZZ:so=\E[8ZZ:st=\E1:ta=^I:\
-	:ue=\E[%gh%{8}%^%Ph%gh%dZZ:up=^K:us=\E[8ZZ:ve=\E.3:\
-	:vi=\E.0:vs=\E.1:
-icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols:\
-	:rs=\Eo1:tc=icl6404:
-
-#### Interactive Systems Corp
-#
-# ISC used to sell OEMed and customized hardware to support ISC UNIX.
-# ISC UNIX still exists in 1995, but ISC itself is no more; they got
-# bought out by Sun.
-#
-
-# From: <cithep!eric>  Wed Sep 16 08:06:44 1981
-# (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
-# ":le=^_:" later overridden -- esr)
-intext|Interactive Systems Corporation modified owl 1200:\
-	:am:bs:\
-	:co#80:it#8:li#24:sg#1:\
-	:al=\020:bl=^G:bt=^Y:cd=\026J:ce=^Kp^R:cl=\014:\
-	:cm=\017%+ %+ :cr=^M:dc=\022:dl=\021:do=^J:ei=^V<:im=^V;:\
-	:ip=:k0=^VJ\r:k1=^VA\r:k2=^VB\r:k3=^VC\r:k4=^VD\r:k5=^VE\r:\
-	:k6=^VF\r:k7=^VG\r:k8=^VH\r:k9=^VI\r:kb=^H:kd=^J:ke=^V9:\
-	:kh=^Z:kl=^_:kr=^^:ks=\036\:\264\026%%%:ku=^\:le=^H:nd=^^:\
-	:se=^V#\s:sf=^J:so=^V$,:ta=^I:up=^\:
-intext2|intextii|INTERACTIVE modified owl 1251:\
-	:am:bw:ul:\
-	:co#80:li#24:sg#0:ug#0:\
-	:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%+^AG:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
-	:do=\E[B:ei=:ic=\E[@:im=:k0=\E@\r:k1=\EP\r:k2=\EQ\r:\
-	:k3=\ES\r:k4=\ET\r:k5=\EU\r:k6=\EV\r:k7=\EW\r:k8=\EX\r:\
-	:k9=\EY\r:kb=^H:kd=\EB\r:kh=\ER\r:kl=\ED\r:kr=\EC\r:\
-	:ku=\EA\r:l0=REFRSH:l1=DEL CH:l2=TABSET:l3=GOTO:l4=+PAGE:\
-	:l5=+SRCH:l6=-PAGE:l7=-SRCH:l8=LEFT:l9=RIGHT:nd=\E[C:\
-	:se=\E[2 D:sf=\E[S:so=\E[6 D:sr=\E[T:ta=^I:ue=\E[2 D:\
-	:up=\E[A:us=\E[18 D:\
-	:vb=\E[;;;;;;;;;2;;u\E[;;;;;;;;;1;;u:
-
-#### Kimtron (abm, kt)
-#
-# Kimtron seems to be history, but as March 1998 these people are still
-# offering repair services for Kimtron equipment:
-#
-#    Com/Pair Monitor Service
-#    1105 N. Cliff Ave.
-#    Sioux Falls, South Dakota 57103
-#
-#    WATS voice:  1-800/398-4946
-#    POTS   fax: +1 605/338-8709
-#    POTS voice: +1 605/338-9650
-#         Email: <compair@sd.cybernex.net>
-#  Internet/Web: <http://www.com-pair.com>
-#
-# Kimtron entries include (undocumented) codes for: enter dim mode,
-# enter bold mode, enter reverse mode, turn off all attributes.
-#
-
-# Kimtron ABM 85 added by Dual Systems
-# (abm85: removed duplicated ":kd=^J:" -- esr)
-abm85|Kimtron ABM 85:\
-	:am:bs:bw:ms:\
-	:co#80:it#8:li#24:sg#1:ug#1:\
-	:al=\EE:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :dc=\EW:\
-	:dl=\ER:do=^J:ei=\Er:if=/usr/share/tabset/stdcrt:im=\EQ:\
-	:is=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq:kb=^H:kd=^J:kh=^^:\
-	:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:se=\Ek:so=\Ej:ta=^I:ue=\Em:\
-	:up=^K:us=\El:
-# Kimtron ABM 85H added by Dual Systems.
-# Some notes about the abm85h entries:
-# 1) there are several firmware revs of 85H in the world. Use abm85h-old for
-#    firmware revs prior to SP51
-# 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
-#    abm85e entry if it is in tvi920 emulation mode. They are incompatible
-#    in some places and NOT software settable i.e., :is: can't fix it)
-# 3) In 85h mode, the arrow keys and special functions transmit when
-#    the terminal is in dup-edit, and work only locally in local-edit.
-#    Vi won't swallow `del char' for instance, but :ti: turns on
-#    dup-edit anyway so that the arrow keys will work right. If the
-#    arrow keys don't work the way you like, change :ti:, :te:, and
-#    :is:.  Note that 920E mode does not have software commands to toggle
-#    between dup and local edit, so you get whatever was set last on the
-#    terminal.
-# 4) :vb: attribute is nice, but seems too slow to work correctly
-#    (\Eb:pc:\Ed)
-# 5) Make sure `hidden' attributes are selected. If `embedded' attributes
-#    are selected, the <xmc@> entry should be removed.
-# 6) auto new-line should be on (selectable from setup mode only)
-#
-# From: Erik Fair <fair@ucbarpa>  Sun Oct 27 07:21:05 1985
-abm85h|Kimtron ABM 85H native mode:\
-	:hs:\
-	:sg@:\
-	:bl=^G:ds=\Ee:fs=^M:im=\EZ:\
-	:is=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El:\
-	:kd=^V:me=\E(\EG0:mh=\E):mk@:ts=\Eg\Ef:vb@:ve=\E.4:vs=\E.2:\
-	:tc=adm+sgr:tc=abm85:
-abm85e|Kimtron ABM 85H in 920E mode:\
-	:sg@:\
-	:bl=^G:im=\EZ:\
-	:is=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em:\
-	:me=\E(\Ek:mh=\E):mr=\Ej:vb@:tc=abm85:
-abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.:\
-	:sg@:\
-	:bl=^G:im=\EZ:\
-	:is=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF:\
-	:me=\E(\Ek:mh=\E):mr=\Ej:tc=abm85:
-# From: <malman@bbn-vax.arpa>
-# (kt7: removed obsolete :ma=^V^J^L :" -- esr)
-kt7|kimtron model kt-7:\
-	:am:bs:\
-	:co#80:it#8:li#24:\
-	:al=\EE:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :dc=\EW:\
-	:dl=\ER:do=^V:ei=:fs=\Eg:ho=^^:ic=\EQ:\
-	:if=/usr/share/tabset/stdcrt:im=:is=\El\E":k0=^AI\r:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:kB=\EI:kC=^Z:kD=\EW:\
-	:kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:\
-	:ku=^K:le=^H:mk@:nd=^L:ta=^I:ts=\Ef:up=^K:tc=adm+sgr:
-# Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
-# other kt7 entry and the adjacent key capabilities).  Removed EE which is
-# identical to :mh:.  Removed :ES=\EGD: which is some kind of highlight
-# but we can't figure out what.
-kt7ix|kimtron model kt-7 or 70 in IX mode:\
-	:am:bw:\
-	:co#80:it#8:li#25:\
-	:@7=\EY:PU=\EK:ac=jYk?lZm@nEqDt4uCvAwBx3:ae=\E%%%:al=\EE:\
-	:as=\E$:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :\
-	:cr=^M:dc=\EW:dl=\ER:do=^V:ds=\Ef\r:ei=:fs=^M:ho=^^:ic=\EQ:\
-	:im=:is=\EG0\E s\017\E~:k0=^AI\r:k1=^A@\r:k2=^AA\r:\
-	:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:\
-	:k9=^AH\r:kA=\EE:kB=\EI:kC=\E*:kE=\ET:kI=\EQ:kL=\ER:kN=\EJ:\
-	:kS=\EY:kb=^H:kd=\E[B:kh=^^:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
-	:mb=\EG2:me=\EG0:mh=\EG@:nd=^L:nw=^M^J:se=\EG0:sf=^J:\
-	:so=\EG4:ta=^I:ts=\Ef:ue=\EG0:up=^K:us=\EG8:ve=\E.3:vi=\E.0:
-
-#### Microdata/MDIS
-#
-# This was a line of terminals made by McDonnell-Douglas Information Systems.
-# These entries come direct from MDIS documentation.  I have edited them only
-# to move primary names of the form p[0-9] * to aliases, and to comment out
-# :ae:/:as: in a couple of entries without <acsc> strings.  I have
-# also removed the change history; the last version indicates this is
-# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
-#
-
-# McDonnell Information Systems Terminal Family History
-# =========================================
-#
-# Prism-1, Prism-2 and P99:
-#       Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
-#
-# Prism-4 and Prism-5:
-#       Slightly less ancient range of Microdata terminals. Follow-on from
-#       Prism-2, but with many enhancements. P5 has eight display pages.
-#
-# Prism-6:
-#       A special terminal for use with library systems, primarily in Germany.
-#       Limited numbers. Similar functionality to P5 (except attributes?).
-#
-# Prism-7, Prism-8 and Prism-9:
-#       More recent range of MDIS terminals, in which P7 and P8
-#       replace the P4 & P5, with added functionality, and P9 is the flagship.
-#       The P9 has two emulation modes - P8 and ANSI - and includes a
-#       large number of the DEC VT220 control sequences. Both
-#       P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
-#
-# Prism-12 and Prism-14:
-#       Latest range, functionally very similar to the P9.  The P14 has a
-#       black-on-white overscanning screen.
-#
-# The terminfo definitions given here are:
-#
-# p2      - Prism-2 (or Prism-1 or P99).
-#
-# p4      - Prism-4 (and older P7s & P8s).
-# p5      - Prism-5 (or Prism-6).
-#
-# p7      - Prism-7.
-# p8      - Prism-8 (in national or multinational mode).
-# p8-w    - 132 column version of p8.
-# p9      - Prism-9 in ANSI mode.
-# p9-w    - 132 column version of p9.
-# p9-8    - Prism-9 in Prism-8 emulation mode.
-# p9-8-w  - As p9-8, but with 132 columns.
-#
-# p12     - Prism-12 in ANSI mode.
-# p12-w   - 132 column version of p12.
-# p12-m   - Prism-12 in MDC emulation mode.
-# p12-m-w - As p12-m, but with 132 columns.
-# p14     - Prism-14 in ANSI mode.
-# p14-w   - 132 column version of p14.
-# p14-m   - Prism-14 in MDC emulation mode.
-# p14-m-w - As p14-m, but with 132 columns.
-#
-# p2: Prism-2
-# -----------
-#
-# Includes Prism-1 and basic P99 without SP or MP loaded.
-# The simplest form of Prism-type terminal.
-# Basic cursor movement and clearing operations only.
-# No video attributes.
-# Notes:
-#  Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
-#  value up, followed by backspace.
-#
-prism2|MDC Prism-2:\
-	:am:bw:ms:\
-	:co#80:li#24:\
-	:bl=^G:cd=\EJ:ce=\EK:\
-	:..ch=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c:\
-	:cl=\014:\
-	:..cm=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c:\
-	:cr=^M:cv=\013%+ :do=^J:ho=^A:kb=^H:kh=^A:le=^H:nd=^F:sf=^J:\
-	:up=^Z:
-
-# p4: Prism-4
-# -----------
-#
-# Includes early versions of P7 & P8.
-# Basic family definition for most Prisms (except P2 and P9 ANSI).
-# Notes:
-#  Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
-#  value up, followed by backspace.
-#  Cursor key definitions removed because they interfere with vi and csh keys.
-#
-prism4|p4|P4|MDC Prism-4:\
-	:5i:am:bw:hs:ms:\
-	:co#80:li#24:sg#1:ug#1:ws#72:\
-	:bl=^G:cd=\EJ:ce=\EK:\
-	:..ch=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c:\
-	:cl=\014:\
-	:..cm=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c:\
-	:cr=^M:cv=\013%+ :do=^J:ds=\035\343\035\345:fs=^]\345:\
-	:ho=^A:kb=^H:kh=^A:le=^H:mb=^CB:me=^C\s:mh=^CA:mk=^CH:mr=^CD:\
-	:nd=^F:pf=\ET:po=\ER:ps=\EU:\
-	:..sa=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;:\
-	:se=^C\s:sf=^J:so=^CD:ts=^]\343:ue=^C\s:up=^Z:us=^CP:\
-	:ve=^]\342:vi=^]\344:
-
-# p5: Prism-5
-# -----------
-#
-# Same definition as p4. Includes Prism-6 (not tested!).
-# Does not use any multi-page features.
-#
-prism5|p5|P5|MDC Prism-5:\
-	:tc=p4:
-
-# p7: Prism-7
-# -----------
-#
-# Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
-# Notes:
-#  Use p4 for very early models of P7.
-#  Rev-index removed; can't send nulls to terminal in 8-bit modes.
-#
-prism7|p7|P7|MDC Prism-7:\
-	:ch@:cm=\E[%i%d;%dH:cv@:tc=p4:
-
-# p8: Prism-8
-# -----------
-#
-# Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
-# Supports national and multinational character sets.
-# Notes:
-#  Alternate char set operations only work in multinational mode.
-#  Use p4 for very early models of P8.
-#  Rev-index removed; can't send nulls to terminal in 8-bit modes.
-# (esr: commented out :as:/:ae: because there's no <acsc>)
-#
-prism8|p8|P8|MDC Prism-8:\
-	:ch=\E[%i%d`:cm=\E[%i%d;%dH:cv=\E[%i%dd:is=\E[<12h:tc=p4:
-
-# p8-w: Prism-8 in 132 column mode
-# --------------------------------
-#
-# 'Wide' version of p8.
-# Notes:
-#  Rev-index removed; can't send nulls to terminal in 8-bit modes.
-#
-prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode:\
-	:co#132:\
-	:is=\E[<12h\E[<14h:tc=p8:
-
-# p9: Prism-9 in ANSI mode
-# -------------------------
-#
-# The "flagship" model of this generation of terminals.
-# ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
-# Notes:
-#  Tabs only reset by "reset". Otherwise assumes default (8 cols).
-#  Fixes to deal with terminal firmware bugs:
-#  . 'ri' uses insert-line since rev index doesn't always
-#  . 'sgr0' has extra '0' since esc[m fails
-#  . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
-#  Not covered in the current definition:
-#  . Labels
-#  . Programming Fn keys
-#  . Graphic characters (defaults correctly to vt100)
-#  . Padding values (sets xon)
-# (esr: commented out :as:/:ae: because there's no <acsc>)
-#
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-prism9|p9|P9|MDC Prism-9 in ANSII mode:\
-	:5i:am:bw:hs:ms:xn:xo:\
-	:co#80:it#8:li#24:vt#3:ws#72:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:\
-	:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:\
-	:F7=\E[31~:F8=\E[32~:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
-	:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%d`:cl=^L:\
-	:cm=\E[%i%d;%dH:cr=^M:ct=\E[2g:cv=\E[%i%dd:dc=\E[P:\
-	:dl=\E[M:do=^J:ds=\E[%}\024:ec=\E[%dX:ei=\E[4l:fs=^T:\
-	:ho=\E[H:im=\E[4h:is=\E[&p\E[<12l\E F:k1=\E[11~:\
-	:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:\
-	:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kC=^L:kb=^H:\
-	:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:\
-	:md=\E[1m:me=\E[0m:mp=\E[32%{:mr=\E[7m:nd=\E[C:nw=^M^J:\
-	:pf=\E[4i:po=\E[5i:ps=\E[i:rc=\E[%z:rp=\E[%r%db%.:\
-	:rs=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N:\
-	:sc=\E[%y:se=\E[27m:sf=^J:so=\E[7m:sr=\E[L:st=\EH:ta=^I:\
-	:ue=\E[24m:up=\E[A:us=\E[4m:ve=\E[<4h:vi=\E[<4l:
-
-# p9-w: Prism-9 in 132 column mode
-# --------------------------------
-#
-# 'Wide' version of p9.
-#
-prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode:\
-	:co#132:\
-	:is=\E[&p\E[<12l\E F\E[<14h:\
-	:rs=\E[&p\E[<12l\E F\E[<14h:tc=p9:
-
-# p9-8: Prism-9 in P8 mode
-# ------------------------
-#
-# P9 terminal in P8 emulation mode.
-# Similar to p8 definition.
-# Insertion and deletion operations possible.
-#
-prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:al=\E[L:dc=\E[P:\
-	:dl=\E[M:ei=:ic=\E[@:im=:tc=p8:
-
-# p9-8-w: Prism-9 in P8 and 132 column modes
-# ------------------------------------------
-#
-# P9 terminal in P8 emulation mode and 132 column mode.
-#
-prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:al=\E[L:dc=\E[P:\
-	:dl=\E[M:ei=:ic=\E[@:im=:tc=p8-w:
-
-# p12: Prism-12 in ANSI mode
-# ---------------------------
-#
-# See p9 definition.
-#
-prism12|p12|P12|MDC Prism-12 in ANSI mode:\
-	:tc=p9:
-
-# p12-w: Prism-12 in 132 column mode
-# ----------------------------------
-#
-# 'Wide' version of p12.
-#
-prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode:\
-	:tc=p9-w:
-
-# p12-m: Prism-12 in MDC emulation mode
-# -------------------------------------
-#
-# P12 terminal in MDC emulation mode.
-# Similar to p8 definition.
-# Insertion and deletion operations possible.
-#
-prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode:\
-	:tc=p9-8:
-
-# p12-m-w: Prism-12 in MDC emulation and 132 column modes
-# -------------------------------------------------------
-#
-# P12 terminal in MDC emulation mode and 132 column mode.
-#
-prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode:\
-	:tc=p9-8-w:
-
-# p14: Prism-14 in ANSII mode
-# ---------------------------
-#
-# See p9 definition.
-#
-prism14|p14|P14|MDC Prism-14 in ANSII mode:\
-	:tc=p9:
-
-# p14-w: Prism-14 in 132 column mode
-# ----------------------------------
-#
-# 'Wide' version of p14.
-#
-prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode:\
-	:tc=p9-w:
-
-# p14-m: Prism-14 in MDC emulation mode
-# -------------------------------------
-#
-# P14 terminal in MDC emulation mode.
-# Similar to p8 definition.
-# Insertion and deletion operations possible.
-#
-prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode:\
-	:tc=p9-8:
-
-# p14-m-w: Prism-14 in MDC emulation and 132 column modes
-# -------------------------------------------------------
-#
-# P14 terminal in MDC emulation mode and 132 column mode.
-#
-prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode:\
-	:tc=p9-8-w:
-
-# End of McDonnell Information Systems Prism definitions
-
-# These things were popular in the Pick database community at one time
-# From: George Land <georgeland@aol.com> 24 Sep 1996
-p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition:\
-	:am:bw:hs:mi:\
-	:co#80:li#24:ma#1:sg#1:ug#1:ws#78:\
-	:F2=^AJ\r:F3=^AK\r:F4=^AL\r:F5=^AM\r:F6=^AN\r:F7=^AO\r:\
-	:bl=^G:cd=\EJ:ce=\EK:cl=^L:cm=\E[%i%d;%dH:cr=^M:dc=\s^H:\
-	:dl=^P:do=^J:ho=^A:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
-	:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:\
-	:kD=\s^H:kE=\EK:kL=^P:kS=\EJ:kb=^H:kd=^J:kh=^A:kl=^U:kr=^F:\
-	:ku=^Z:l1=F1:l2=F2:l3=F3:l4=F4:l5=F5:l6=F6:l7=F7:l8=F8:l9=F9:\
-	:la=F10:le=^U:mb=^CB:me=^C\s:mh=^CA:mk=^CH:mr=^CD:nd=^F:\
-	:nw=^J^M:pc=\0:se=^C\s:sf=^J:so=^CE:ue=^C\s:up=^Z:us=^C0:
-
-#### Microterm (act, mime)
-#
-# The mime1 entries refer to the Microterm Mime I or Mime II.
-# The default mime is assumed to be in enhanced act iv mode.
-#
-
-# New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>.  Prevents
-# freakout with out-of-range args on Sytek multiplexors.  No :so=^N: and
-# :se=^N: since  it gets confused and it's too dim anyway.  No :ic:
-# since Sytek insists ^S means xoff.
-# (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
-act4|microterm|microterm act iv:\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=2.3*\001<2.3*/>:bl=^G:cd=2.2*\037:ce=.1*\036:\
-	:cl=12\014:cm=\024%+^X%>/0%+P:cr=^M:dc=.1*\004:\
-	:dl=2.3*\027:do=^K:ho=^]:kd=^K:kl=^H:kr=^X:ku=^Z:le=^H:nd=^X:\
-	:sf=^J:up=^Z:
-# The padding on :sr: and :ta: for act5 and mime is a guess and not final.
-# The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
-# (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
-act5|microterm5|microterm act v:\
-	:kd=^K:kl=^H:kr=^X:ku=^Z:sr=\EH:uc=^H\EA:tc=act4:
-# Mimes using brightness for standout.  Half bright is really dim unless
-# you turn up the brightness so far that lines show up on the screen.
-mime-fb|full bright mime1:\
-	:is=^S\E:se=^S:so=^Y:tc=mime:
-mime-hb|half bright mime1:\
-	:is=^Y\E:se=^Y:so=^S:tc=mime:
-# (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
-# the more plausible ":do=^J:" -- esr)
-# uc was at one time disabled to get around a curses bug, be wary of it
-mime|mime1|mime2|mimei|mimeii|microterm mime1:\
-	:am:bs:\
-	:co#80:it#8:li#24:vt#9:\
-	:al=\001:bl=^G:cd=^_:ce=^^:cl=^]^C:cm=\024%+^X%> 0%+P:\
-	:cr=^M:dl=\027:do=^J:ho=^]:is=^S\E^Q:kd=^K:kl=^H:kr=^X:ku=^Z:\
-	:le=^H:nd=^X:sf=^J:sr=\022:ta=\011:uc=^U:up=^Z:
-# These termcaps (for mime2a) put the terminal in low intensity mode
-# since high intensity mode is so obnoxious.
-mime2a-s|microterm mime2a (emulating an enhanced soroc iq120):\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\001:bl=^G:cd=\EJ:ce=\EK:cl=\EL:cm=\E=%+ %+ :cr=^M:\
-	:dc=\ED:dl=\027:do=^J:ei=^Z:ho=^^:im=\EE:ip=:is=\E):kd=^J:\
-	:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:se=\E;:sf=^J:so=\E\::sr=\EI:\
-	:ue=\E7:up=\EI:us=\E6:
-# This is the preferred mode (but ^X can't be used as a kill character)
-mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52):\
-	:bs:\
-	:co#80:it#8:li#24:\
-	:al=\001:bl=^G:cd=\EQ:ce=\EP:cl=\EL:cm=\EY%+ %+ :cr=^M:\
-	:dc=^N:dl=\027:do=^J:ei=^Z:ho=\EH:im=^O:ip=:is=^Y:kd=\EB:\
-	:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:se=\E9:sf=^J:so=\E8:\
-	:sr=\EA:ta=^I:ue=\E5:up=\EA:us=\E4:
-# (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
-mime3a|mime1 emulating 3a:\
-	:am@:\
-	:kd=^K:kl=^H:kr=^X:ku=^Z:tc=adm3a:
-mime3ax|mime-3ax|mime1 emulating enhanced 3a:\
-	:it#8:\
-	:al=\001:cd=^_:ce=^X:dl=\027:ta=\011:tc=mime3a:
-# Wed Mar  9 18:53:21 1983
-# We run our terminals at 2400 baud, so there might be some timing problems at
-# higher speeds. The major improvements in this model are the terminal now
-# scrolls down and insert mode works without redrawing the rest of the line
-# to the right of the cursor. This is done with a bit of a kludge using the
-# exit graphics mode to get out of insert, but it does not appear to hurt
-# anything when using vi at least. If you have some users using act4s with
-# programs that use curses and graphics mode this could be a problem.
-mime314|mm314|mime 314:\
-	:am:\
-	:co#80:li#24:\
-	:al=^A:cd=^_:ce=^^:cl=^L:cm=\024%.%.:dc=^D:dl=^W:ei=^V:ho=^]:\
-	:im=^S:kd=^K:kl=^H:kr=^X:ku=^Z:le=^H:nd=^X:ta=^I:up=^Z:
-# Microterm mime 340 from University of Wisconsin
-mm340|mime340|mime 340:\
-	:co#80:li#24:\
-	:al=46\EU:cd=2*\037:ce=2.1\EL:cl=12\032:cm=\E=%+ %+ :\
-	:cr=^M:dc=2.1*\E#:dl=49.6\EV:do=^J:is=\E,:kb=^H:kd=^J:kl=^H:\
-	:ku=^K:le=^H:nd=^L:nw=^M^J:sf=^J:ta=^I:up=^K:
-# This came from University of Wisconsin marked "astro termcap for jooss".
-# (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
-# also added <rmam>/<smam> based  on the init string -- esr)
-mt4520-rv|micro-term 4520 reverse video:\
-	:am:hs:ms:xn:xo:\
-	:co#80:it#8:li#24:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
-	:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
-	:cr=^M:cs=\E[%i%d;%dr:ct=\E[g:dc=\E[P:dl=\E[M:do=\E[B:ei=:\
-	:fs=\E[?5l\E[?5h:ho=\E[H:ic=\E[@:im=:\
-	:is=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:kh=\E[H:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:ll=\E[24;1H:me=\E[m:\
-	:nd=\E[C:nw=\EE:\
-	:r1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J:\
-	:rc=\E8:rf=/usr/share/tabset/vt100:sc=\E7:se=\E[0m:\
-	:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:ts=\E[25;1H:ue=\E[24m:\
-	:up=\E[A:us=\E[4m:vb=\E[?5l\E[?5h:ve=\E[0V\E8:\
-	:vs=\E7\E[0U:
-
-# Fri Aug  5 08:11:57 1983
-# This entry works for the ergo 4000 with the following setups:
-# ansi,wraparound,newline disabled, xon/xoff disabled in both
-# setup a & c.
-#
-# WARNING!!! There are multiple versions of ERGO 4000 microcode
-# Be advised that very early versions DO NOT WORK RIGHT !!
-# Microterm does have a ROM exchange program- use it or lose big
-# (ergo400: added <rmam>/<smam> based on the init string -- esr)
-ergo4000|microterm ergo 4000:\
-	:da:db:ms:\
-	:co#80:li#66:\
-	:RA=\E[?7l:SA=\E[?7m:al=\E[1L:bl=^G:cd=\E[0J:ce=\E[0K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=\E[1P:dl=\E[1M:\
-	:do=\E[B:ei=\E[4l:im=\E[4h:\
-	:is=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h:k1=\EOP:\
-	:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\E[B:ke=\E=:kl=\E[D:kr=\E[C:\
-	:ks=\E=:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:le=^H:me=\E[m:\
-	:nd=\E[C:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:up=\E[A:
-
-#### NCR
-#
-# NCR's terminal group was merged with AT&T's when AT&T bought the company.
-# For what happened to that group, see the ADDS section.
-#
-# There is an NCR4103 terminal that's just a re-badged Wyse-50.
-#
-
-# The following vendor-supplied termcaps were captured from the Boundless
-# Technologies site, 8 March 1998.  I removed all-upper-case names that were
-# identical, except for case, to lower-case ones.  I also uncommented the acsc
-# capabilities.X
-#
-# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
-# DEC vt200/300 with color capabilities added.
-ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard:\
-	:Co#8:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:tc=ncr260vt300an:
-# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
-# DEC vt200/300 with color capabilities added.
-ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard:\
-	:Co#8:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:tc=ncr260vt300wan:
-# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
-# DEC vt200/300 with color capabilities added.
-ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard:\
-	:Co#8:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:tc=ncr260vt300pp:
-# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
-# DEC vt200/300 with color capabilities added.
-ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode:\
-	:Co#8:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:tc=ncr260vt300wpp:
-# This definition for ViewPoint supports several attributes.  This means
-# that it has magic cookies (extra spaces where the attributes begin).
-# Some applications do not function well with magic cookies.  The System
-# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
-# If supporting various attributes is not vital, 'xmc#1' and the extra
-# attributes can be removed.
-# Mapping to ASCII character set ('acsc' capability) can also be
-# restored if needed.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-ncr260vppp|NCR 2900_260 viewpoint:\
-	:am:bw:hs:km:mi:ms:xo:\
-	:co#80:li#24:sg#1:ug#1:\
-	:K1=^A:K3=\EJ:K4=\ET:K5=\EJ:ae=\EcB0\EH\003:al=\EM:\
-	:as=\EcB1\EH\002:bl=^G:bt=\EI:cd=\Ek:ce=\EK:cl=\014:\
-	:cm=\EY%+ %+ :cr=\r:dc=\EW:dl=\El:do=\n:ds=\E`c:ei=\Er:\
-	:fs=^M:ho=\036:im=\Eq:\
-	:is=\Ee6\E~%\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7:\
-	:k1=^B1\r:k2=^B2\r:k3=^B3\r:k4=^B4\r:k5=^B5\r:k6=^B6\r:\
-	:k7=^B7\r:k8=^B8\r:k9=^B9\r:kD=\EW:kI=\Eq:kN=\EJ:kP=\EJ:\
-	:kb=^H:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:le=\010:ll=\001:mb=\EG2:\
-	:me=\EG0\EH\003:mh=\EGp:mr=\EG4:nd=\006:nw=\037:\
-	:rs=\Ee6\E~%\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7:\
-	:se=\EG0:sf=\n:so=\EG4:sr=\Ej:st=\E1:ta=^I:ts=\EF:ue=\EG0:\
-	:up=\032:us=\EG8:ve=\E`5:vi=\E`0:vs=\E`5:
-ncr260vpwpp|NCR 2900_260 viewpoint wide mode:\
-	:co#132:\
-	:cm=\Ea%i%dR%dC:\
-	:is=\Ee6\E~%\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7:\
-	:rs=\Ee6\E~%\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7:\
-	:tc=ncr260vppp:
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-ncr260vt100an|NCR 2900_260 vt100 with ansi kybd:\
-	:am:hs:mi:ms:xn:xo:\
-	:Nl#32:co#80:li#24:\
-	:%0=\E[29~:%1=\E[28~:*6=\E[4~:@0=\E[1~:@8=\EOM:AL=\E[%dL:\
-	:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:K1=\EOw:K2=\EOy:\
-	:K3=\EOu:K4=\EOq:K5=\EOs:LE=\E[%dD:RI=\E[%dC:SF=\E[%dE:\
-	:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[0J:\
-	:ce=\E[0K:ch=\E[%dG:cl=\E[2J\E[1;1H:cm=\E[%i%d;%dH:cr=\r:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%dd:dc=\E[1P:dl=\E[M:\
-	:do=\E[B:ds=\E[0$~\E[1$~:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:\
-	:ho=\E[H:im=\E[4h:\
-	:is=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kD=\E[3~:kI=\E[2~:\
-	:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
-	:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=\E[D:mb=\E[5m:md=\E[1m:\
-	:me=\E[0m\017:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:\
-	:rs=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:sc=\E7:se=\E[0m:sf=\ED:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:\
-	:ts=\E[2$~\E[1$}:ue=\E[0m:up=\E[A:us=\E[4m:ve=\E[?25h:\
-	:vi=\E[?25l:
-ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd:\
-	:co#132:\
-	:cm=\E[%i%d;%dH:\
-	:is=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:rs=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:tc=ncr260vt100an:
-ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd:\
-	:@7=\E[5~:K1=\E[H:K2=\E[V:K3=\EOu:K5=\E[U:\
-	:is=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:kD=\E[4~:kI=\E[1~:kN=\E[6~:kP=\E[3~:kd=\E[B:ke=\E>:\
-	:kh=\E[2~:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:l1=pf1:l2=pf2:\
-	:l3=pf3:l4=pf4:\
-	:rs=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:tc=ncr260vt100an:
-ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+  kybd:\
-	:co#132:\
-	:cm=\E[%i%d;%dH:\
-	:is=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:rs=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:tc=ncr260vt100pp:
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-ncr260vt200an|NCR 2900_260 vt200 with ansi kybd:\
-	:am:hs:mi:ms:xn:xo:\
-	:co#80:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:K1=\EOw:K2=\EOy:K3=\EOu:K4=\EOq:K5=\EOs:LE=\E[%dD:\
-	:RI=\E[%dC:SF=\E[%dE:UP=\E[%dA:ae=\017:al=\E[L:as=\016:\
-	:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[2J\E[1;1H:cm=\E[%i%d;%dH:\
-	:cr=\r:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[1P:dl=\E[M:do=\E[B:\
-	:ds=\E[0$~\E[1$~:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:ho=\E[H:\
-	:im=\E[4h:\
-	:is=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:k0=\EOy:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[M:k6=\E[17~:\
-	:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\
-	:kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
-	:ks=\E[?1h\E=:ku=\EOA:le=\E[D:mb=\E[5m:md=\E[1m:\
-	:me=\E[0m\017:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:\
-	:rs=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:ts=\E[2$~\E[1$}:ue=\E[24m:up=\E[A:us=\E[4m:ve=\E[?25h:\
-	:vi=\E[?25l:
-ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd:\
-	:co#132:\
-	:cm=\E[%i%d;%dH:\
-	:is=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H:\
-	:rs=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H:\
-	:tc=ncr260vt200an:
-ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd:\
-	:@7=\E[1~:K1=\E[H:K2=\E[V:K3=\EOu:K5=\E[U:kD=\E[4~:\
-	:kI=\E[2~:kN=\E[6~:kP=\E[5~:kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:\
-	:kr=\E[C:ks=\E=:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
-	:tc=ncr260vt200an:
-ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+  kybd:\
-	:co#132:\
-	:cm=\E[%i%d;%dH:\
-	:is=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:rs=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:tc=ncr260vt200pp:
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-ncr260vt300an|NCR 2900_260 vt300 with ansi kybd:\
-	:am:hs:mi:ms:xn:xo:\
-	:co#80:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:K1=\EOw:K2=\EOy:K3=\EOu:K4=\EOq:K5=\EOs:LE=\E[%dD:\
-	:RI=\E[%dC:SF=\E[%dE:UP=\E[%dA:ae=\017:al=\E[L:as=\016:\
-	:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[2J\E[1;1H:cm=\E[%i%d;%dH:\
-	:cr=\r:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[1P:dl=\E[M:do=\E[B:\
-	:ds=\E[0$~\E[1$~:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:ho=\E[H:\
-	:im=\E[4h:\
-	:is=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:k0=\EOy:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[M:k6=\E[17~:\
-	:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\
-	:kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
-	:ks=\E[?1h\E=:ku=\EOA:le=\E[D:mb=\E[5m:md=\E[1m:\
-	:me=\E[0m\017:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:\
-	:rs=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:ts=\E[2$~\E[1$}:ue=\E[24m:up=\E[A:us=\E[4m:ve=\E[?25h:\
-	:vi=\E[?25l:
-ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd:\
-	:co#132:\
-	:cm=\E[%i%d;%dH:\
-	:is=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H:\
-	:rs=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H:\
-	:tc=ncr260vt300an:
-ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd:\
-	:@7=\E[1~:K1=\E[H:K2=\E[V:K3=\EOu:K5=\E[U:kD=\E[4~:\
-	:kI=\E[2~:kN=\E[6~:kP=\E[5~:kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:\
-	:kr=\E[C:ks=\E=:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
-	:tc=ncr260vt300an:
-NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+  kybd:\
-	:co#132:\
-	:cm=\E[%i%d;%dH:\
-	:is=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:rs=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
-	:tc=ncr260vt300pp:
-# This terminfo file contains color capabilities for the Wyse325 emulation of
-# the NCR 2900/260C color terminal.  Because of the structure of the command
-# (escape sequence) used to set color attributes, one of the fore/background
-# colors must be preset to a given value. I have set the background color to
-# black.  The user can change this setup by altering the last section of the
-# 'setf' definition.  The escape sequence to set color attributes is
-#		ESC d y <foreground_color> <background_color> 1
-# In addition, the background color can be changed through the desk accessories.
-# The capablitiy 'op' sets colors to green on black (default combination).
-#
-# NOTE:  The NCR Unix System Administrator's Shell will not function properly
-# 	    if the 'pairs' capability is defined. Un-Comment the 'pairs'
-#	    capability and recompile if you wish to have it included.
-#
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-ncr260wy325pp|NCR 2900_260 wyse 325:\
-	:am:bw:hs:km:mi:ms:xo:\
-	:co#80:li#24:\
-	:K1=^^:K2=\EJ:K4=\ET:K5=\EK:ae=\EH\003\EcB0:al=\EE:\
-	:as=\EH\002\EcB1:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:\
-	:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=\EW:dl=\ER:do=\n:ds=\E`c:\
-	:ei=\Er:fs=^M:ho=\036:im=\Eq:\
-	:is=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\Eq:kN=\EK:kP=\EJ:\
-	:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=\010:mb=\EG2:\
-	:me=\EG0\EcB0\EcD:mr=\EG4:nd=\014:nw=\037:\
-	:rs=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:se=\EG0:sf=\n:so=\EGt:sr=\Ej:st=\E1:ta=^I:ts=\EF:ue=\EG0:\
-	:up=\013:us=\EG8:ve=\E`1:vi=\E`0:vs=\E`5:
-ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode:\
-	:co#132:\
-	:cm=\Ea%i%dR%dC:\
-	:is=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:rs=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:tc=ncr260wy325pp:
-# This definition for Wyse 350 supports several attributes.  This means
-# that it has magic cookies (extra spaces where the attributes begin).
-# Some applications do not function well with magic cookies.  The System
-# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
-# If supporting various attributes is not vital, 'xmc#1' and the extra
-# attributes can be removed.
-# Mapping to ASCII character set ('acsc' capability) can also be
-# restored if needed.
-# In addition, color capabilities have been added to this file.  The drawback,
-# however, is that the background color has to be black.  The foreground colors
-# are numbered 0 through 15.
-#
-# NOTE:  The NCR Unix System Administrator's Shell does not function properly
-# 	    with the 'pairs' capability defined as below.  If you wish to
-#	    have it included, Un-comment it and recompile (using 'tic').
-#
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-ncr260wy350pp|NCR 2900_260 wyse 350:\
-	:am:bw:hs:km:mi:ms:xo:\
-	:co#80:li#24:sg#1:ug#1:\
-	:K1=^^:K4=\ET:K5=\EK:ae=\EH\003\EcB0:al=\EE:\
-	:as=\EH\002\EcB1:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E+:\
-	:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=\EW:dl=\ER:do=\n:ds=\E`c:\
-	:ei=\Er:fs=^M:ho=\036:im=\Eq:\
-	:is=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\Eq:kN=\EK:kP=\EJ:\
-	:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=\010:mb=\EG2:\
-	:me=\EG0\EH\003\EcD:mh=\EGp:mr=\EG4:nd=\014:nw=\037:\
-	:rs=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:se=\EG0:sf=\n:so=\EGt:sr=\Ej:st=\E1:ta=^I:ts=\EF:ue=\EG0:\
-	:up=\013:us=\EG8:ve=\E`1:vi=\E`0:vs=\E`5:
-ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode:\
-	:co#132:\
-	:cm=\Ea%i%dR%dC:\
-	:is=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:rs=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:tc=ncr260wy350pp:
-# This definition for Wyse 50+ supports several attributes.  This means
-# that it has magic cookies (extra spaces where the attributes begin).
-# Some applications do not function well with magic cookies.  The System
-# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
-# If supporting various attributes is not vital, 'xmc#1' and the extra
-# attributes can be removed.
-# Mapping to ASCII character set ('acsc' capability) can also be
-# restored if needed.
-# (ncr260wy50+pp: originally contained commented-out
-# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-ncr260wy50+pp|NCR 2900_260 wyse 50+:\
-	:am:bw:hs:km:mi:ms:xo:\
-	:co#80:li#24:sg#1:ug#1:\
-	:K1=^^:K4=\ET:K5=\EK:ae=\EH^C:al=\EE:as=\EH^B:bl=^G:bt=\EI:\
-	:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=\EW:\
-	:dl=\ER:do=\n:ds=\E`c:ei=\Er:fs=^M:ho=\036:im=\Eq:\
-	:is=\Ee6\E~"\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\Eq:kN=\EK:kP=\EJ:\
-	:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=\010:mb=\EG2:\
-	:me=\EG0\EH\003:mh=\EGp:mr=\EG4:nd=\014:nw=\037:\
-	:rs=\Ee6\E~"\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:se=\EG0:sf=\n:so=\EGt:sr=\Ej:st=\E1:ta=\011:ts=\EF:ue=\EG0:\
-	:up=\013:us=\EG8:ve=\E`1:vi=\E`0:vs=\E`5:
-ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode:\
-	:co#132:\
-	:cm=\Ea%i%dR%dC:\
-	:is=\Ee6\E~"\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:rs=\Ee6\E~"\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:tc=ncr260wy50+pp:
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-ncr260wy60pp|NCR 2900_260 wyse 60:\
-	:am:bw:hs:km:mi:ms:xo:\
-	:co#80:li#24:\
-	:K1=^^:K2=\EJ:K4=\ET:K5=\EK:ae=\EH^C:al=\EE:as=\EH^B:bl=^G:\
-	:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :cr=^M:ct=\E0:\
-	:dc=\EW:dl=\ER:do=\n:ds=\E`c:ei=\Er:fs=^M:ho=\036:im=\Eq:\
-	:is=\Ee6\E~4\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\Eq:kN=\EK:kP=\EJ:\
-	:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=\010:mb=\EG2:\
-	:me=\EG0\EcB0\EcD:mr=\EG4:nd=\014:nw=\037:\
-	:rs=\Ee6\E~4\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:se=\EG0:sf=\n:so=\EGt:sr=\Ej:st=\E1:ta=\011:ts=\EF:ue=\EG0:\
-	:up=\013:us=\EG8:ve=\E`1:vi=\E`0:vs=\E`5:
-ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode:\
-	:co#132:\
-	:cm=\Ea%i%dR%dC:\
-	:is=\Ee6\E~4\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:rs=\Ee6\E~4\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
-	:tc=ncr260wy60pp:
-ncr160vppp|NCR 2900_160 viewpoint:\
-	:tc=ncr260vppp:
-ncr160vpwpp|NCR 2900_160 viewpoint wide mode:\
-	:tc=ncr260vpwpp:
-ncr160vt100an|NCR 2900_160 vt100 with ansi kybd:\
-	:tc=ncr260vt100an:
-ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd:\
-	:tc=ncr260vt100pp:
-ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd:\
-	:tc=ncr260vt100wan:
-ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+  kybd:\
-	:tc=ncr260vt100wpp:
-ncr160vt200an|NCR 2900_160 vt200 with ansi kybd:\
-	:tc=ncr260vt200an:
-ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd:\
-	:tc=ncr260vt200pp:
-ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd:\
-	:tc=ncr260vt200wan:
-ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+  kybd:\
-	:tc=ncr260vt200wpp:
-ncr160vt300an|NCR 2900_160 vt300 with ansi kybd:\
-	:tc=ncr260vt300an:
-ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd:\
-	:tc=ncr260vt300pp:
-ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd:\
-	:tc=ncr260vt300wan:
-ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+  kybd:\
-	:tc=ncr260vt300wpp:
-ncr160wy50+pp|NCR 2900_160 wyse 50+:\
-	:tc=ncr260wy50+pp:
-ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode:\
-	:tc=ncr260wy50+wpp:
-ncr160wy60pp|NCR 2900_160 wyse 60:\
-	:tc=ncr260wy60pp:
-ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode:\
-	:tc=ncr260wy60wpp:
-ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal:\
-	:5i:am:hs:mi:ms:xo:\
-	:Nl#32:co#80:it#8:li#24:\
-	:#4=\E[D:%i=\E[C:@8=^M:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
-	:DO=\E[%dB:K1=\E[H:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
-	:ac=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~:ae=\017:\
-	:al=\E[B\E[L:as=\016:bl=^G:cb=\E[1K:cd=\E[0J:ce=\E[0K:\
-	:cl=\E[2J\E[1;1H:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:ct=\E[3g:dc=\E[1P:dl=\E[M:do=\E[B:ds=\E[31l:eA=\E(B\E)0:\
-	:ei=\E[4l:fs=1:ho=\E[H:im=\E[4h:\
-	:is=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0:k1=\EOP:\
-	:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:\
-	:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\017\E[0m:mr=\E[7m:\
-	:nd=\E[C:nw=\EE:ps=\E[i:rc=\E8:\
-	:rs=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031:\
-	:..sa=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>:\
-	:sc=\E7:se=\E[0m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:ts=\E[>+1:ue=\E[0m:up=\E[A:us=\E[4m:
-ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal:\
-	:co#132:\
-	:is=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0:\
-	:rs=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031:\
-	:tc=ncrvt100an:
-#
-# Vendor-supplied NCR termcaps end here
-
-# NCR7900 DIP switches:
-#
-# Switch A:
-# 1-4 - Baud Rate
-# 5   - Parity (Odd/Even)
-# 6   - Don't Send or Do Send Spaces
-# 7   - Parity Enable
-# 8   - Stop Bits (One/Two)
-#
-# Switch B:
-# 1   - Upper/Lower Shift
-# 2   - Typewriter Shift
-# 3   - Half Duplex / Full Duplex
-# 4   - Light/Dark Background
-# 5-6 - Carriage Return Without / With Line Feed
-# 7   - Extended Mode
-# 8   - Suppress Keyboard Display
-#
-# Switch C:
-# 1   - End of line entry disabled/enabled
-# 2   - Conversational mode / (Local?) Mode
-# 3   - Control characters displayed / not displayed
-# 4   - (2-wire?) / 4-wire communications
-# 5   - RTS on and off for each character
-# 6   - (50Hz?) / 60 Hz
-# 7   - Exit after level zero diagnostics
-# 8   - RS-232 interface
-#
-# Switch D:
-# 1   - Reverse Channel (yes / no)
-# 2   - Manual answer (no / yes)
-# 3-4 - Cursor appearance
-# 5   - Communication Rate
-# 6   - Enable / Disable EXT turnoff
-# 7   - Enable / Disable CR turnoff
-# 8   - Enable / Disable backspace
-#
-# Since each attribute parameter is 0 or 1, we shift each attribute (standout,
-# reverse, blink, dim, and underline) the appropriate number of bits (by
-# multiplying the 0 or 1 by a correct factor to shift) so the bias character,
-# '@' is (effectively) "or"ed with each attribute to generate the proper third
-# character in the <ESC>0 sequence.  The :sa: string implements the following
-# equation:
-#
-# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17))    =>
-# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
-#
-#	Where:  P1 <==> Standout attribute parameter
-#		P2 <==> Underline attribute parameter
-#		P3 <==> Reverse attribute parameter
-#		P4 <==> Blink attribute parameter
-#		P5 <==> Dim attribute parameter
-# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
-ncr7900i|ncr7900|ncr 7900 model 1:\
-	:am:bw:ul:\
-	:co#80:li#24:sg#1:ug#1:\
-	:bl=^G:cd=\Ek:ce=\EK:cl=^L:cm=\E1%r%.%.:cr=^M:do=^J:\
-	:is=\E0@\010\E3\E4\E7:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:le=^H:\
-	:ll=^A:mb=\E0B:me=\E0@:mh=\E0A:mr=\E0P:nd=^F:pf=^T:po=^R:\
-	:..sa=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c:\
-	:se=\E0@:sf=^J:so=\E0Q:ue=\E0@:up=^Z:us=\E0`:
-ncr7900iv|ncr 7900 model 4:\
-	:am:bw:es:hs:\
-	:co#80:li#24:\
-	:al=\E^N:bl=^G:cl=^L:cm=\013%+@\E\005%02:cr=^M:dl=\E^O:\
-	:do=^J:ds=\Ey1:fs=\Ek\Ey5:ho=\013@\E^E00:k1=\ES:k2=\ET:\
-	:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:kb=^H:kd=\EB:\
-	:kh=\EH:kl=\ED:kr=\EC:ku=\EA:l6=blue:l7=red:l8=white:le=^H:\
-	:nw=^M^J:sf=^J:ts=\Ej\Ex5\Ex1\EY8%+ \Eo:
-# Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
-#	   The user can enter a CTRL-B to get out of this locked state.
-# In <hpa>, we want to output the character given by the formula:
-#		((col / 10) * 16) + (col % 10)		where "col" is "p1"
-ncr7901|ncr 7901 model:\
-	:am:bw:ul:\
-	:co#80:li#24:\
-	:bl=^G:cd=\Ek:ce=\EK:ch=\020%B%.:cl=^L:cm=\EY%+ %+ :cr=^M:\
-	:cv=\013%+@:do=^J:is=\E4^O:kC=^L:kd=^J:kh=^H:kl=^U:kr=^F:\
-	:ku=^Z:le=^H:ll=^A:mb=\E0B:me=^O:mh=\E0A:mr=\E0P:nd=^F:pf=^T:\
-	:po=^R:\
-	:..sa=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016:\
-	:se=^O:sf=^J:so=\E0Q\016:ue=^O:up=^Z:us=\E0`\016:ve=^X:\
-	:vi=^W:
-
-#### Perkin-Elmer (Owl)
-#
-# These are official terminfo entries from within Perkin-Elmer.
-#
-
-bantam|pe550|pe6100|perkin elmer 550:\
-	:bs:\
-	:co#80:li#24:\
-	:bl=^G:ce=\EI:cl=\EK:cm=\EX%+ \EY%+ :cr=^M:do=^J:ho=\EH:\
-	:le=^H:ll=\EH\EA:nd=\EC:sf=^J:up=\EA:
-fox|pe1100|perkin elmer 1100:\
-	:am:bs:\
-	:co#80:li#24:\
-	:bl=^G:cd=\EJ:ce=\EI:cl=\EH\EJ:cm=\EX%+ \EY%+ :cr=^M:\
-	:ct=\E3:do=^J:ho=\EH:le=^H:ll=\EH\EA:nd=\EC:sf=^J:st=\E1:\
-	:up=\EA:vb=\020\002\020\003:
-owl|pe1200|perkin elmer 1200:\
-	:am:bs:in:\
-	:co#80:li#24:\
-	:al=\EL:bl=^G:cd=\EJ:ce=\EI:cl=\EH\EJ:cm=\EX%+ \EY%+ :\
-	:cr=^M:ct=\E3:dc=\EO:dl=\EM:do=^J:ei=:ho=\EH:ic=\EN:im=:ip=:\
-	:k0=\ERJ:k1=\ERA:k2=\ERB:k3=\ERC:k4=\ERD:k5=\ERE:k6=\ERF:\
-	:k7=\ERG:k8=\ERH:k9=\ERI:kb=^H:le=^H:ll=\EH\EA:me=\E!\0:\
-	:nd=\EC:se=\E!\0:sf=^J:so=\E!^H:st=\E1:up=\EA:\
-	:vb=\020\002\020\003:
-pe1251|pe6300|pe6312|perkin elmer 1251:\
-	:am:\
-	:co#80:it#8:li#24:pb#300:sg#1:vt#8:\
-	:bl=^G:cd=\EJ:ce=\EI:cl=\EK:cm=\EX%+ \EY%+ :cr=^M:ct=\E3:\
-	:do=\EB:ho=\EH:k0=\ERA:k1=\ERB:k2=\ERC:k3=\ERD:k4=\ERE:\
-	:k5=\ERF:k6=\ERG:k7=\ERH:k8=\ERI:k9=\ERJ:k;=\ERK:le=\ED:\
-	:nd=\EC:sf=^J:st=\E1:up=\EA:
-# (pe7000m: this had
-# 	rmul=\E!\0, smul=\E!\040,
-# which is probably wrong, it collides with kf0
-pe7000m|perkin elmer 7000 series monochrome monitor:\
-	:am:\
-	:co#80:li#24:\
-	:bl=^G:bt=\E!Y:cd=\EJ:ce=\EI:cl=\EK:cm=\ES%+ %+ :cr=^M:\
-	:do=\EB:ho=\EH:i1=\E!\0\EW  7o\Egf\ES7\s:k0=\E!\0:\
-	:k1=\E!^A:k2=\E!^B:k3=\E!^C:k4=\E!^D:k5=\E!^E:k6=\E!^F:\
-	:k7=\E!^G:k8=\E!^H:k9=\E!^I:k;=\E!^J:kb=^H:kd=\E!U:kh=\E!S:\
-	:kl=\E!V:kr=\E!W:ku=\E!T:le=\ED:ll=\ES7\s:nd=\EC:sf=^J:\
-	:sr=\ER:up=\EA:
-pe7000c|perkin elmer 7000 series color monitor:\
-	:i1=\E!\0\EW  7o\Egf\Eb0\Ec7\ES7\s:se=\Eb0:so=\Eb2:\
-	:ue=\E!\0:us=\E!\s:tc=pe7000m:
-
-#### Sperry Univac
-#
-# Sperry Univac has merged with Burroughs to form Unisys.
-#
-
-# This entry is for the Sperry UTS30 terminal running the TTY
-# utility under control of CP/M Plus 1R1. The functionality
-# provided is comparable to the DEC vt100.
-# (uts30: I added <rmam>/<smam> based on the init string -- esr)
-uts30|sperry uts30 with cp/m@1R1:\
-	:am:bw:hs:\
-	:co#80:li#24:ws#40:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7m:SF=\E[%dB:\
-	:SR=\E[%dA:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=\Ed:al=\EN:as=\EF:bl=^G:cd=\E[J:ce=\E[K:cl=^L:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\EU%+ %+ :dc=\EM:dl=\EL:do=\EB:\
-	:ei=:fs=^M:ho=\E[H:ic=\EO:im=:is=\E[U 7\E[24;1H:kb=^H:\
-	:kd=\EOB:kh=\E[H:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:mb=\E[5m:\
-	:md=\E[1m:me=\E[m:mr=\E[7m:nd=\EC:rc=\EX:\
-	:rf=/usr/share/tabset/vt100:\
-	:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\EW:se=\E[m:\
-	:sf=^J:so=\E[7m:sr=\EI:ta=^I:ts=\E]:uc=\EPB:ue=\E[m:up=\E[A:\
-	:us=\E[4m:ve=\ES:vi=\ER:
-
-#### Tandem
-#
-# Tandem builds these things for use with its line of fault-tolerant
-# transaction-processing computers.  They aren't generally available
-# on the merchant market, and so are fairly uncommon.
-#
-
-tandem6510|adm3a repackaged by Tandem:\
-	:tc=adm3a:
-
-# A funny series of terminal that TANDEM uses.  The actual model numbers
-# have a fourth digit after 653 that designates minor variants.  These are
-# natively block-mode and rather ugly, but they have a character mode which
-# this doubtless(?) exploits.  There is a 6520 that is slightly dumber.
-# (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
-# removed :if=/usr/share/tabset/tandem653:, no such file -- esr)
-tandem653|t653x|Tandem 653x multipage terminal:\
-	:am:bs:da:db:hs:\
-	:co#80:li#24:sg#1:ug#1:ws#64:\
-	:cd=\EJ:ce=\EK:cl=\EI:cm=\023%+ %+ :do=^J:ds=\Eo\r:fs=^M:\
-	:ho=\EH:le=^H:me=\E6\s:nd=\EC:se=\E6\s:sf=\ES:so=\E6$:\
-	:sr=\ET:ts=\Eo:ue=\E6\s:up=\EA:us=\E60:
-
-#### Tandy/Radio Shack
-#
-# Tandy has a line of VDTs distinct from its microcomputers.
-#
-
-dmterm|deskmate terminal:\
-	:am:bw:\
-	:co#80:li#24:\
-	:al=\EP:bl=^G:cd=\EJ:ce=\EK:cl=\Ej:cm=\EY%+ %+ :cr=^M:\
-	:dc=\ES:dl=\ER:do=\EB:ei=:ho=\EH:ic=\EQ:im=:k0=\E1:k1=\E2:\
-	:k2=\E3:k3=\E4:k4=\E5:k5=\E6:k6=\E7:k7=\E8:k8=\E9:k9=\E0:\
-	:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:l0=f1:l1=f2:l2=f3:l3=f4:\
-	:l4=f5:l5=f6:l6=f7:l7=f8:l8=f9:l9=f10:le=^H:ll=\EE:mk@:nd=\EC:\
-	:sf=\EX:ta=^I:ue@:up=\EA:us@:ve=\EG6:vi=\EG5:tc=adm+sgr:
-dt100|dt-100|Tandy DT-100 terminal:\
-	:xo:\
-	:co#80:li#24:sg#1:ug#1:\
-	:ac=jjkkllmmnnqqttuuvvwwxx:ae=^O:al=\E[L:as=^N:bl=^G:\
-	:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\010\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%2;%2r:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:\
-	:im=:is=\E[?3l\E)0\E(B:k1=\E[?3i:k2=\E[2i:k3=\E[@:k4=\E[M:\
-	:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:k9=\E[21~:\
-	:k;=\E[?5i:kN=\E[29~:kP=\E[28~:kd=\E[B:kh=\E[H:kl=\E[D:\
-	:kr=\E[C:ku=\E[A:l1=f1:l2=f2:l3=f3:l4=f4:l5=f5:l6=f6:l7=f7:\
-	:l8=f8:le=^H:me=\E[m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:\
-	:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:vi=\E[?25l:
-dt100w|dt-100w|Tandy DT-100 terminal (wide mode):\
-	:co#132:tc=dt100:
-dt110|Tandy DT-110 emulating ansi:\
-	:xo:\
-	:co#80:li#24:\
-	:@7=\E[K:ac=jjkkllmmnnqqttuuvvwwxx:ae=^O:al=\E[0L:as=^N:\
-	:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:cm=\010\E[%i%d;%dH:\
-	:cr=^M:cs=\E[%i%d;%dr:dc=\E[0P:dl=\E[0M:do=\E[0B:\
-	:eA=\E(B\E)0:ei=:ho=\E[H:ic=\E[0@:im=:is=\E[?3l\E)0\E(B:\
-	:k1=\E[1~:k2=\E[2~:k3=\E[3~:k4=\E[4~:k5=\E[5~:k6=\E[6~:\
-	:k7=\E[7~:k8=\E[8~:k9=\E[9~:k;=\E[10~:kI=\E[@:kN=\E[26~:\
-	:kP=\E[25~:kd=\E[B:kh=\E[G:kl=\E[D:kr=\E[C:ku=\E[A:l0=f1:\
-	:l1=f2:l2=f3:l3=f4:l4=f5:l5=f6:l6=f7:l7=f8:l8=f9:l9=f10:le=^H:\
-	:me=\E[m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\
-	:ue=\E[m:up=\E[0A:us=\E[4m:ve=\E[?25h:vi=\E[?25l:
-pt210|TRS-80 PT-210 printing terminal:\
-	:hc:os:\
-	:co#80:\
-	:bl=^G:cr=^M:do=^J:sf=^J:
-
-#### Tektronix (tek)
-#
-# Tektronix tubes are graphics terminals.  Most of them use modified
-# oscilloscope technology incorporating a long-persistence green phosphor,
-# and support vector graphics on a main screen with an attached "dialogue
-# area" for interactive text.
-#
-
-tek|tek4012|tektronix 4012:\
-	:bs:os:\
-	:co#75:li#35:\
-	:bl=^G:cl=\E\014:cr=^M:do=^J:ff=\014:is=\E^O:le=^H:
-# (tek4013: added <acsc> to suppress tic warnings re :as:/:ae: --esr)
-tek4013|tektronix 4013:\
-	:ac=:ae=\E^O:as=\E^N:tc=tek4012:
-tek4014|tektronix 4014:\
-	:co#81:li#38:\
-	:is=\E\017\E9:tc=tek4012:
-# (tek4015: added <acsc> to suppress tic warnings re :as:/:ae: --esr)
-tek4015|tektronix 4015:\
-	:ac=:ae=\E^O:as=\E^N:tc=tek4014:
-tek4014-sm|tektronix 4014 in small font:\
-	:co#121:li#58:\
-	:is=\E\017\E\::tc=tek4014:
-# (tek4015-sm: added <acsc> to suppress tic warnings re :as:/:ae: --esr)
-tek4015-sm|tektronix 4015 in small font:\
-	:ac=:ae=\E^O:as=\E^N:tc=tek4014-sm:
-# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
-#
-# You need to have "stty nl2" in effect.  Some versions of tset(1) know
-# how to set it for you.
-#
-# It's got the Magic Cookie problem around stand-out mode.  If you can't
-# live with Magic Cookie, remove the :so: and :se: fields and do without
-# reverse video.  If you like reverse video stand-out mode but don't want
-# it to flash, change the letter 'H' to 'P' in the :so: field.
-tek4023|tektronix 4023:\
-	:am:bs:\
-	:co#80:dN#4:li#24:sg#1:vt#4:\
-	:bl=^G:cl=4\E\014:cm=\034%r%+ %+ :cr=^M:do=^J:kb=^H:le=^H:\
-	:nd=^I:nl=^J:se=^_@:so=^_P:
-# It is recommended that you run the 4025 at 4800 baud or less;
-# various bugs in the terminal appear at 9600.  It wedges at the
-# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
-# on keyboard don't work.  You have to hit BREAK twice to get
-# one break at any speed - this is a documented feature.
-# Can't use cursor motion because it's memory relative, and
-# because it only works in the workspace, not the monitor.
-# Same for home. Likewise, standout only works in the workspace.
-#
-# :ce: was commented out since vi and rogue seem to work better
-# simulating it with lots of spaces!
-#
-# :al: and :AL: had 145ms of padding, but that slowed down vi's ^U
-# and didn't seem necessary.
-#
-tek4024|tek4025|tek4027|tektronix 4024/4025/4027:\
-	:am:bs:da:db:\
-	:co#80:it#8:li#34:lm#0:\
-	:AL=\037up\r\037ili %d\r:CC=^_:DL=\037dli %d\r\006:\
-	:DO=\037dow %d\r:LE=\037lef %d\r:RI=\037rig %d\r:\
-	:UP=\037up %d\r:al=\037up\r\037ili\r:bl=^G:\
-	:cd=\037dli 50\r:cl=\037era\r\n\n:cr=^M:dc=\037dch\r:\
-	:dl=\037dli\r\006:do=^F^J:ei=:ic=\037ich\r \010:im=:\
-	:is=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r:\
-	:ke=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r:\
-	:ks=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r:\
-	:le=^H:nd=\037rig\r:sf=^F^J:ta=^I:up=^K:
-tek4025-17|tek 4025 17 line window:\
-	:li#17:tc=tek4025:
-tek4025-17-ws|tek 4025 17 line window in workspace:\
-	:is=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r:\
-	:se=\037att s\r:so=\037att e\r:te=\037mon h\r:\
-	:ti=\037wor h\r:tc=tek4025-17:
-tek4025-ex|tek4027-ex|tek 4025/4027 w/!:\
-	:is=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r:\
-	:te=\037com 33\r:ti=!com 31\r:tc=tek4025:
-# Tektronix 4025a
-# From: Doug Gwyn <gwyn@brl-smoke.ARPA>
-# The following status modes are assumed for normal operation (replace the
-# initial "!" by whatever the current command character is):
-#	!COM 29			# NOTE: changes command character to GS (^])
-#	^]DUP
-#	^]ECH R
-#	^]EOL
-#	^]RSS T
-#	^]SNO N
-#	^]STO 9 17 25 33 41 49 57 65 73
-# Other modes may be set according to communication requirements.
-# If the command character is inadvertently changed, termcap can't restore it.
-# Insert-character cannot be made to work on both top and bottom rows.
-# Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
-# There also seems to be a problem with vertical motion, perhaps involving
-# delete/insert-line, following a typed carriage return.  This terminal sucks.
-# Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
-# work any more. -- esr)
-tek4025a|Tektronix 4025A:\
-	:am:bs:bw:da:db:pt:xo:\
-	:co#80:it#8:li#34:\
-	:CC=^]:DC=\035dch %d;:DL=\035dli %d;:DO=\035dow %d;:\
-	:LE=\035lef %d;:RI=\035rig %d;:SF=\035dow %d;:\
-	:UP=\035up %d;:al=\013\035ili;:bl=^G:bt=\035bac;:\
-	:ce=\035dch 80;:ch=\r\035rig %d;:cl=\035era;\n\035rup;:\
-	:cr=^M:ct=\035sto;:dc=\035dch;:dl=\035dli;:do=^J:le=^H:\
-	:nd=\035rig;:\
-	:rs=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;:\
-	:sf=^J:ta=^I:up=^K:
-# From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
-# Here's the command file that I use to get rogue to work on the 4025.
-# It should work with any program using the old curses (e.g. it better
-# not try to scroll, or cursor addressing won't work.  Also, you can't
-# see the cursor.)
-# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
-tek4025-cr|tek 4025 for curses and rogue:\
-	:am:bs:\
-	:co#80:it#8:li#33:\
-	:cl=\037era;:cm=\037jum%i%d,%d;:do=^F^J:\
-	:is=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r:\
-	:le=^H:nd=\037rig;:sf=^F^J:ta=^I:te=\037wor 0:\
-	:ti=\037wor 33h:up=^K:
-# next two lines commented out since curses only allows 128 chars, sigh.
-#	:ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
-#	:te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
-tek4025ex|4025ex|4027ex|tek 4025 w/!:\
-	:is=\037com 33\r\n!sto 9,17,25,33,41,49,57,65,73\r:\
-	:te=\037com 33\r:ti=!com 31\r:tc=tek4025:
-tek4105|tektronix 4105:\
-	:am:bs:mi:ms:ul:xn:xt:\
-	:co#79:it#8:li#29:\
-	:ac=:ae=\E[m:al=\E[1L:as=\E[1m:bl=^G:bt=\E[Z:cd=\E[J:\
-	:ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%2;%2H:cr=^M:ct=\E[1g:\
-	:dc=\E[1P:dl=\E[1M:do=\E[1B:ei=\E[4l:ho=\E[H:i1=\E%!1\E[m:\
-	:im=\E[4h:is=\E%!1\E[?6141\E[m:kb=^H:kd=\E[1B:kl=\E[1D:\
-	:kr=\E[1C:ku=\E[1A:mb=\E[=3;<7m:md=\E[=7;<4m:\
-	:me=\E[=0;<1m:mh=\E[=1;<6m:mk=\E[=6;<5:mr=\E[=1;<3m:\
-	:nd=\E[1C:se=\E[=0;<1m:sf=\E[S:so=\E[=2;<3m:sr=\E[T:ta=^I:\
-	:te=:ti=\E%!1\E[?6l\E[2J:ue=\E[=0;<1m:up=\E[1A:\
-	:us=\E[=5;<2m:
-
-# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
-tek4105-30|4015 emulating 30 line vt100:\
-	:am:mi:ms:xn:xo:\
-	:co#80:it#8:li#30:vt#3:\
-	:@8=\EOM:DO=\E[%dB:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:K5=\EOn:\
-	:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=^J:\
-	:eA=\E(B\E)0:ho=\E[H:k0=\EOy:k1=\EOP:k2=\EOQ:k3=\EOR:\
-	:k4=\EOS:k5=\EOt:k6=\EOu:k7=\EOv:k8=\EOl:k9=\EOw:k;=\EOx:\
-	:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
-	:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:\
-	:nd=\E[C:rc=\E8:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:..sa=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>:\
-	:sc=\E7:se=\E[m:sf=^J:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:\
-	:ue=\E[m:up=\E[A:us=\E[4m:
-
-# Tektronix 4105 from BRL
-# The following setup modes are assumed for normal operation:
-#	CODE ansi		CRLF no			DABUFFER 141
-#	DAENABLE yes		DALINES 30		DAMODE replace
-#	DAVISIBILITY yes	ECHO no			EDITMARGINS 1 30
-#	FLAGGING input		INSERTREPLACE replace	LFCR no
-#	ORIGINMODE relative	PROMPTMODE no		SELECTCHARSET G0 B
-#	SELECTCHARSET G1 0	TABS -2
-# Other setup modes may be set for operator convenience or communication
-# requirements; I recommend
-#	ACURSOR 1 0		AUTOREPEAT yes		AUTOWRAP yes
-#	BYPASSCANCEL <LF>	CURSORKEYMODE no	DAINDEX 1 0 0
-#	EOFSTRING ''		EOLSTRING <CR>		EOMCHARS <CR> <NU>
-#	GAMODE overstrike	GCURSOR 0 100 0		GSPEED 10 1
-#	IGNOREDEL no		KEYEXCHAR <DL>		NVDEFINE -53 "<NU>"
-#	PROMPTSTRING ''		QUEUESIZE 2460		WINDOW 0 0 4095 3132
-#	XMTDELAY 0
-# and factory color maps.  After setting these modes, save them with NVSAVE. No
-# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# "IC" cannot be used in combination with "im" & "ei".
-# "tek4105a" is just a guess:
-tek4105a|Tektronix 4105:\
-	:bs:ms:pt:xo:\
-	:co#80:it#8:kn#8:li#30:vt#3:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
-	:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ac=:ae=^O:al=\E[L:\
-	:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
-	:dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:\
-	:is=\E%!1:k0=\EOA:k1=\EOB:k2=\EOC:k3=\EOD:k4=\EOP:k5=\EOQ:\
-	:k6=\EOR:k7=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
-	:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:\
-	:l5=F6:l6=F8:le=^H:ll=\E[30;H:mb=\E[5m:md=\E[1m:me=\E[m:\
-	:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:\
-	:rs=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>:\
-	:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:te=\E%!0\ELBH=\E%!1:ti=\E[?6l:ue=\E[m:up=\EM:us=\E[4m:\
-	:ve=\E%!0\ETD10\E%!1:vi=\E%!0\ETD00\E%!1:\
-	:vs=\E%!0\ETD70\E%!1:
-
-#
-# Tektronix 4106/4107/4109 from BRL
-# The following setup modes are assumed for normal operation:
-#	CODE ansi		COLUMNMODE 80		CRLF no
-#	DABUFFER 141		DAENABLE yes		DALINES 32
-#	DAMODE replace		DAVISIBILITY yes	ECHO no
-#	EDITMARGINS 1 32	FLAGGING input		INSERTREPLACE replace
-#	LFCR no			LOCKKEYBOARD no		ORIGINMODE relative
-#	PROMPTMODE no		SELECTCHARSET G0 B	SELECTCHARSET G1 0
-#	TABS -2
-# Other setup modes may be set for operator convenience or communication
-# requirements; I recommend
-#	ACURSOR 1 0		AUTOREPEAT yes		AUTOWRAP yes
-#	BYPASSCANCEL <LF>	CURSORKEYMODE no	DAINDEX 1 0 0
-#	EOFSTRING ''		EOLSTRING <CR>		EOMCHARS <CR> <NU>
-#	GAMODE overstrike	GCURSOR 0 100 0		GSPEED 9 3
-#	IGNOREDEL no		KEYEXCHAR <DL>		NVDEFINE -53 "<NU>"
-#	PROMPTSTRING ''		QUEUESIZE 2620		WINDOW 0 0 4095 3132
-#	XMTDELAY 0
-# and factory color maps.  After setting these modes, save them with NVSAVE.  No
-# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# "IC" cannot be used in combination with "im" & "ei".
-tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109:\
-	:ms:xo:\
-	:co#80:it#8:li#32:vt#3:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
-	:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ac=:ae=^O:al=\E[L:\
-	:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
-	:dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:\
-	:is=\E%!1:k0=\EOA:k1=\EOB:k2=\EOC:k3=\EOD:k4=\EOP:k5=\EOQ:\
-	:k6=\EOR:k7=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
-	:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:\
-	:l5=F6:l6=F8:le=^H:ll=\E[32;H:mb=\E[5m:md=\E[1m:me=\E[m:\
-	:mr=\E[7m:nd=\E[C:nw=\EE:\
-	:r1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>:\
-	:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7;42m:sr=\EM:st=\EH:\
-	:ta=^I:te=\E%!0\ELBH=\E%!1:ti=\E[?6l:ue=\E[m:up=\EM:\
-	:us=\E[4m:ve=\E%!0\ETD10\E%!1:vi=\E%!0\ETD00\E%!1:\
-	:vs=\E%!0\ETD70\E%!1:
-
-tek4107|tek4109|tektronix terminals 4107 4109:\
-	:am:bs:mi:ms:ul:xn:xt:\
-	:co#79:it#8:li#29:\
-	:bl=^G:cd=\EJ:ce=\EK:cl=\ELZ:cm=\EY%+ %+ :cr=^M:do=^J:kb=^H:\
-	:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:mb=\E%!1\E[5m\E%!0:\
-	:md=\E%!1\E[1m\E%!0:me=\E%!1\E[m\E%!0:\
-	:mh=\E%!1\E[<0m\E%!0:mr=\E%!1\E[7m\E%0:nd=\EC:\
-	:..sa=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0:\
-	:se=\E%!1\E[m\E%!0:sf=^J:so=\E%!1\E[7;5m\E%!0:sr=\EI:\
-	:ta=^I:ue=\E%!1\E[m\E%!0:up=\EA:us=\E%!1\E[4m\E%!0:\
-	:ve=\E%!0:vs=\E%!3:
-# Tektronix 4207 with sysline.  In the ancestral termcap file this was 4107-s;
-# see the note attached to tek4207.
-tek4207-s|Tektronix 4207 with sysline but no memory:\
-	:es:hs:\
-	:ds=\E7\E[?6l\E[2K\E[?6h\E8:fs=\E[?6h\E8:\
-	:i1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J:\
-	:is=\E7\E[?6l\E[2K\E[?6h\E8:\
-	:ts=\E7\E[?6l\E[2K\E[;%i%df:tc=tek4107:
-
-# The 4110 series may be a wonderful graphics series, but they make the 4025
-# look good for screen editing.  In the dialog area, you can't move the cursor
-# off the bottom line.  Out of the dialog area, ^K moves it up, but there
-# is no way to scroll.
-#
-# Note that there is a floppy for free from Tek that makes the
-# 4112 emulate the vt52 (use the vt52 termcap). There is also
-# an expected enhancement that will use ANSI standard sequences.
-#
-# 4112 in non-dialog area pretending to scroll. It really wraps
-# but vi is said to work (more or less) in this mode.
-#
-# 'vi' works reasonably well with this entry.
-#
-otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series:\
-	:am:\
-	:co#80:li#34:\
-	:bl=^G:cl=\E^L:cr=^M:do=^J:le=^H:sf=^J:te=\EKA1\ELV1:\
-	:ti=\EKA0\ELV0\EMG0:up=^K:
-# The 4112 with the ANSI compatibility enhancement
-tek4112|tek4114|tektronix 4110 series:\
-	:am:bs:db:\
-	:co#80:li#34:\
-	:al=\E[L:bt=\E[Z:cd=\E[0J:ce=\E[0K:cl=\E[2J\E[0;0H:\
-	:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:ei=:ic=\E[@:im=:is=\E3!1:\
-	:le=^H:me=\E[m:nd=\E[C:se=\E[m:sf=\E7\E[0;0H\E[M\E8:\
-	:so=\E[7m:sr=\E7\E[0;0H\E[L\E8:ue=\E[m:up=\EM:us=\E[4m:
-tek4112-nd|4112 not in dialog area:\
-	:ns:\
-	:up=^K:tc=tek4112:
-tek4112-5|4112 in 5 line dialog area:\
-	:li#5:tc=tek4112:
-# (tek4113: this used to have ":nd=\LM1\s\LM0:", someone's mistake;
-# removed ":as=\E^N:, :ae=\E^O:", which had been commented out in 8.3.
-# Note, the !0 and !1 sequences in :te:/:ti:/:ve:/:vi: were
-# previously \0410 and \0411 sequences...I don't *think* they were supposed
-# to be 4-digit octal -- esr)
-tek4113|tektronix 4113 color graphics with 5 line dialog area:\
-	:am:bs:da:eo:\
-	:co#80:li#5:\
-	:cl=\ELZ:do=^J:is=\EKA1\ELL5\ELV0\ELV1:le=^H:\
-	:nd=\ELM1 \ELM0:uc=\010\ELM1_\ELM0:\
-	:vb=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0:
-tek4113-34|tektronix 4113 color graphics with 34 line dialog area:\
-	:li#34:\
-	:is=\EKA1\ELLB2\ELV0\ELV1:tc=tek4113:
-# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
-# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
-# :vb: needs enough delay to let you see the background color being toggled.
-tek4113-nd|tektronix 4113 color graphics with no dialog area:\
-	:am:bs:eo:\
-	:co#80:it#8:li#34:\
-	:cl=\E^L:do=^J:ho=\ELF7l\177 @:is=\ELZ\EKA0\ELF7l\177 @:\
-	:le=^H:ll=\ELF hl @:nd=^I:se=\EMT1:so=\EMT2:ta=^I:\
-	:uc=\010\EMG1_\EMG0:up=^K:\
-	:vb=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0:\
-	:vs=\ELZ\EKA0:
-# This entry is from Tek. Inc.  (Brian Biehl)
-# (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
-otek4115|Tektronix 4115:\
-	:am:bs:da:db:eo:\
-	:co#80:it#8:li#34:\
-	:RA=\E[?7l:SA=\E[?7h:al=\E[L:bt=\E[Z:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[2J:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:\
-	:ei=\E[4l:ho=\E[H:if=/usr/share/tabset/vt100:im=\E[4h:\
-	:is=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m:\
-	:kb=^H:ke=\E>:ks=\E=:le=\E[D:me=\E[m:nd=\E[C:se=\E[m:\
-	:so=\E[7m:sr=\EM:ta=^I:te=\E%!0\ELBG8\E%!1\E[34;1H\E[J:\
-	:ti=\E%!0\ELBB2\E%!1:ue=\E[m:up=\E[A:us=\E[4m:\
-	:ve=\E%!0\ELBG8\E%!1\E[34;1H:vs=\E%!0\ELBB2\E%!1:
-tek4115|newer tektronix 4115 entry with more ANSI capabilities:\
-	:am:xo:\
-	:co#80:li#34:\
-	:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\
-	:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:al=\E[L:bl=^G:\
-	:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%+^AG:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:cr=^M:ct=\E[2g:cv=\E[%+^Ad:dc=\E[P:\
-	:dl=\E[M:do=^J:ei=:ho=\E[H:ic=\E[@:im=:kb=^H:kd=\E[B:kh=\E[H:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
-	:mk=\E[8m:mr=\E[7m:nd=\E[C:..rp=%p1%c\E[%p2%{1}%-%db:\
-	:..sa=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m:\
-	:se=\E[m:sf=^J:so=\E[7m:st=\EH:ta=^I:ue=\E[m:up=\E[A:\
-	:us=\E[4m:
-# The tek4125 emulates a vt100 incorrectly - the scrolling region
-# command is ignored.  The following entry replaces :cs: with the needed
-# :AL:, :AL:, and :im:; removes some cursor pad commands that the tek4125
-# chokes on; and adds a lot of initialization for the tek dialog area.
-# Note that this entry uses all 34 lines and sets the cursor color to green.
-# Steve Jacobson 8/85
-# (tek4125: there were two "\!"s in the is that I replaced with "\E!";
-# commented out, :im:=\E1 because there's no :ei:  -- esr)
-tek4125|tektronix 4125:\
-	:li#34:\
-	:al=\E[1L:cs@:dl=\E[1M:\
-	:is=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:ks=\E=:rc@:sc@:tc=vt100:
-
-# From: <jcoker@ucbic>
-# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
-# supplied another, less capable 4107 entry.  So we'll use that for 4107 and
-# note that if jcoker wasn't confused you may be able to use this one.
-# I merged in :ms:,:sf:,:sr:,<invis>,:ct: from a BRL entry -- esr)
-tek4207|Tektronix 4207 graphics terminal with memory:\
-	:am:bw:mi:ms:ul:xn:\
-	:co#80:it#8:li#32:\
-	:al=3\E[L:bt=\E[Z:cd=\E[J:ce=5\E[K:cl=156\E[H\E[J:\
-	:cm=\E[%i%d;%dH:ct=\E[1g:dc=4\E[P:dl=3\E[M:do=^J:ei=:\
-	:ho=\E[H:ic=4\E[@:im=:\
-	:is=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J:\
-	:kd=\ED:kh=\E[H:kl=\E[D:kr=\E[C:ku=\EM:le=^H:mb=\E[5m:\
-	:md=\E[1m:me=\E[m:mk=\E[=6;<5:mr=\E[7m:nd=\E[C:se=\E[m:\
-	:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:\
-	:te=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f:ti=\E[?6l\E[H\E[J:\
-	:ue=\E[m:up=\EM:us=\E[4m:
-
-# From: <carolyn@dali.berkeley.edu>  Thu Oct 31 12:54:27 1985
-# (tek4404: There was a "\!" in :ti: that I replaced with "\E!".
-# Tab had been given as \E2I,that must be the tab-set capability -- esr)
-tek4404|tektronix 4404:\
-	:bs:\
-	:co#80:it#8:li#32:\
-	:al=\E[1L:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\
-	:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[1M:do=^J:ei=\E[4l:ho=\E[H:\
-	:im=\E[4h:kd=\E[B:ke=\E[?1h:kl=\E[D:kr=\E[C:ks=\E[?1l:\
-	:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:nd=\E[C:rc=\E8:\
-	:sc=\E7:se=\E[27m:so=\E[7m:st=\E[2I:ta=^I:\
-	:te=\E[1;1H\E[0J\E[?6h\E[?1l:\
-	:ti=\E%\E!1\E[1;32r\E[?6l\E>:ue=\E[m:up=\E[A:us=\E[4m:
-# Some unknown person wrote:
-# I added the is string - straight Unix has ESC ; in the login
-# string which sets a ct8500 into monitor mode (aka 4025 snoopy
-# mode). The is string here cleans up a few things (but not
-# everything).
-ct8500|tektronix ct8500:\
-	:am:bw:da:db:\
-	:co#80:li#25:\
-	:al=\E^L:bl=^G:bt=\E^I:cd=\E^U:ce=\E^T:cl=\E^E:\
-	:cm=\E|%+ %+ :cr=^M:dc=\E^]:dl=\E^M:do=^J:ei=:ic=\E^\:im=:\
-	:is=\037\EZ\Ek:le=^H:me=\E\s:nd=\ES:se=\E\s:sf=^J:so=\E$:\
-	:sr=\E^A:ta=^I:ue=\E\s:up=\ER:us=\E!:
-
-# Tektronix 4205 terminal.
-#
-# am is not defined because the wrap around occurs not when the char.
-# is placed in the 80'th column, but when we are attempting to type
-# the 81'st character on the line.  (esr: hmm, this is like the vt100
-# version of xenl, perhaps am + xenl would work!)
-#
-# Bold, dim, and standout are simulated by colors and thus not allowed
-# with colors.  The tektronix color table is mapped into the RGB color
-# table by setf/setb. All colors are reset to factory specifications by oc.
-# The <initc> cap uses RGB notation to define colors.  for arguments 1-3 the
-# interval (0-1000) is broken into 8 smaller sub-intervals (125).  Each sub-
-# interval then maps into pre-defined value.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-tek4205|tektronix 4205:\
-	:cc:mi:ms:\
-	:Co#8:NC#49:co#80:it#8:li#30:pa#63:\
-	:AL=\E[%dL:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:\
-	:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=\E[1L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\
-	:ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:ct=\E[1g:\
-	:dc=\E[1P:dl=\E[1M:do=\E[B:eA=\E)0:ec=\E%dX:ei=\E[4l:\
-	:ho=\E[H:i1=\E%!0\ETM1\E%!1\E[m:im=\E[4h:k0=\EOA:k1=\EOB:\
-	:k2=\EOC:k3=\EOD:k4=\EP:k5=\EQ:k6=\ER:k7=\ES:kb=^H:kd=\E[B:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[=7;<4m:\
-	:me=\E[=0;<1m\E[24;25;27m\017:mh=\E[=1;<6m:mk=\E[=6;<5:\
-	:mr=\E[7m:nd=\E[C:\
-	:oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1:\
-	:op=\E[39;40m:se=\E[=0;<1m:sf=\ED:so=\E[=2;<3m:sr=\EM:\
-	:ta=^I:te=:ti=\E%%%!1\E[?6l\E[2J:ue=\E[24m:up=\E[A:\
-	:us=\E[4m:
-
-#### Teletype (tty)
-#
-# These are the hardcopy Teletypes from before AT&T bought the company,
-# clattering electromechanical dinosaurs in Bakelite cases that printed on
-# pulpy yellow roll paper.  If you remember these you go back a ways.
-# Teletype-branded VDTs are listed in the AT&T section.
-#
-# The earliest UNIXes were designed to use these clunkers; nroff and a few
-# other programs still default to emitting codes for the Model 37.
-#
-
-tty33|tty35|model 33 or 35 teletype:\
-	:hc:os:xo:\
-	:co#72:\
-	:bl=^G:cr=^M:do=^J:sf=^J:
-tty37|model 37 teletype:\
-	:bs:hc:os:xo:\
-	:bl=^G:cr=^M:do=^J:hd=\E9:hu=\E8:le=^H:sf=^J:up=\E7:
-
-# There are known to be at least three flavors of the tty40, all seem more
-# like IBM half duplex forms fillers than ASCII terminals.  They have lots of
-# awful braindamage, such as printing a visible newline indicator after each
-# newline.  The 40-1 is a half duplex terminal and is hopeless.  The 40-2 is
-# braindamaged but has hope and is described here.  The 40-4 is a 3270
-# lookalike and beyond hope.  The terminal has visible bell but I don't know
-# it - it's null here to prevent it from showing the BL character.
-# There is an \EG in <nl> because of a bug in old vi (if stty says you have
-# a "newline" style terminal (-crmode) vi figures all it needs is nl
-# to get crlf, even if :cr: is not ^M.)
-# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
-tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2:\
-	:bs:xo:\
-	:co#80:li#24:\
-	:al=\EL:cd=\EJ:cl=\EH\EJ:cr=\EG:ct=\EH\E2:dc=\EP:dl=\EM:\
-	:do=\EB:ei=:ho=\EH:ic=\E^:im=:kb=^]:kl=^H:le=^H:nd=\EC:pf=^T:\
-	:po=\022:rs=\023\ER:se=\E4:sf=\ES:so=\E3:sr=\ET:st=\E1:\
-	:ta=\E@:up=\E7:
-tty43|model 43 teletype:\
-	:am:bs:hc:os:xo:\
-	:co#132:\
-	:bl=^G:cr=^M:do=^J:kb=^H:le=^H:sf=^J:
-
-#### Tymshare
-#
-
-# You can add :is=\E<: to put this 40-column mode, though I can't
-# for the life of me think why anyone would want to.
-scanset|sc410|sc415|Tymshare Scan Set:\
-	:am:bw:ms:\
-	:co#80:li#24:\
-	:ac=j%k4l<m-q,x5:ae=^O:as=^N:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:\
-	:cm=\EY%+ %+ :cr=^M:do=^J:ho=\EH:kd=\EB:kl=\ED:kr=\EC:\
-	:ku=\EA:le=^H:nd=^I:pf=\E;0:po=\E;0:ps=\E;3:r1=\E>:rc=^C:\
-	:sc=^B:sf=^J:up=^K:
-
-#### Volker-Craig (vc)
-#
-# If you saw a Byte Magazine cover with a terminal on it during the early
-# 1980s, it was probably one of these.  Carl Helmers liked them because
-# they could crank 19.2 and were cheap (that is, he liked them until he tried
-# to program one...)
-#
-
-# Missing in vc303a and vc303 descriptions:  they scroll 2 lines at a time
-# every other linefeed.
-vc303|vc103|vc203|volker-craig 303:\
-	:am:bs:ns:\
-	:co#80:li#24:\
-	:bl=^G:cl=\014:cr=^M:do=^J:ho=\013:kd=^J:kl=^H:kr=^I:ku=^N:\
-	:le=^H:ll=\017W:nd=^I:up=^N:
-vc303a|vc403a|volker-craig 303a:\
-	:ce=\026:cl=\030:ho=\031:kr=^U:ku=^Z:ll=^P:nd=^U:up=^Z:\
-	:tc=vc303:
-# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
-vc404|volker-craig 404:\
-	:am:bs:\
-	:co#80:li#24:\
-	:bl=^G:cd=\027:ce=\026:cl=\030:cm=\020%+ %+ :cr=^M:do=^J:\
-	:ho=\031:kd=^J:kl=^H:kr=^U:ku=^Z:le=^H:nd=^U:sf=^J:up=^Z:
-vc404-s|volker-craig 404 w/standout mode:\
-	:do=^J:se=^O:so=^N:tc=vc404:
-# From: <wolfgang@cs.sfu.ca>
-# (vc414: merged in cup/dl1/home from an old vc414h-noxon)
-vc414|vc414h|Volker-Craig 414H in sane escape mode.:\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\E\032:cd=\E^X:ce=10\E\017:cl=\E\034:cm=\E\021%r%.%.:\
-	:dc=\E3:dl=\E\023:do=\E^K:ei=:ho=\E^R:ic=\E\::im=:k0=\EA:\
-	:k1=\EB:k2=\EC:k3=\ED:k4=\EE:k5=\EF:k6=\EG:k7=\EH:kd=\E^K:\
-	:kh=\E^R:kl=^H:kr=^P:ku=\E^L:l0=PF1:l1=PF2:l2=PF3:l3=PF4:\
-	:l4=PF5:l5=PF6:l6=PF7:l7=PF8:nd=^P:se=\E^_:so=\E^Y:up=\E^L:
-vc415|volker-craig 415:\
-	:cl=^L:tc=vc404:
-
-######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
-#
-
-#### IBM PC and clones
-#
-
-# The pcplot IBM-PC terminal emulation program is really messed up. It is
-# supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
-# doesn't support scrolling regions, ignores add line commands, and ignores
-# delete line commands. Consequently, the resulting behavior looks like a
-# crude adm3a-type terminal.
-# Steve Jacobson 8/85
-pcplot|pc-plot terminal emulation program:\
-	:xn@:\
-	:AL@:DL@:al@:cs@:dl@:rc@:sc@:tc=vt100:
-# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
-# I've found that my KayPro II, running MDM730, continues to emulate an
-# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
-# system the following termcap entry works well:
-# I have noticed a couple of minor glitches, but nothing I can't work
-# around. (I added two capabilities from the BRL entry -- esr)
-kaypro|kaypro2|kaypro II:\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\EE:bl=^G:cd=^W:ce=^X:cl=1\032:cm=\E=%+ %+ :cr=^M:\
-	:dl=\ER:do=^J:ho=^^:kd=^J:kr=^L:ku=^K:nd=^L:sf=^J:up=^K:
-
-# From IBM, Thu May  5 19:35:27 1983
-# (ibmpc: commented out :im:=\200R because we don't know :ei: -- esr)
-ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS):\
-	:am:bs:\
-	:co#80:li#24:\
-	:bl=^G:cl=^L^K:cr=^M^^:do=^J:ho=^K:kd=^_:le=^]:nd=^\:sf=\n:\
-	:up=^^:
-
-ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX:\
-	:am:bs:bw:eo:hs:km:ms:ul:\
-	:co#80:it#8:li#24:\
-	:@7=\E[Y:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS\E[%dB:\
-	:SR=\E[%dT\E[%dA:UP=\E[%dA:\
-	:ac=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263:\
-	:bl=^G:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\Ec:cm=\E[%i%d;%dH:\
-	:cr=^M:do=\E[B:ec=\E[%dX:ho=\E[H:k1=\240:k2=\241:k3=\242:\
-	:k4=\243:k5=\244:k6=\245:k7=\246:k8=\247:k9=\250:k;=\251:\
-	:kB=^]:kD=\177:kI=\E[^H:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:\
-	:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:ll=\E[24;1H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m:mk=\E[30;40m:mr=\E[7m:nd=\E[C:\
-	:nw=^M:\
-	:..sa=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m:\
-	:se=\E[m:sf=\E[S\E[B:so=\E[7m:sr=\E[T\E[A:ue=\E[m:up=\E[A:\
-	:us=\E[4m:
-
-#### Apple II
-#
-# Apple II firmware console first, then various 80-column cards and
-# terminal emulators.  For two cents I'd toss all these in the UFO file
-# along with the 40-column apple entries.
-#
-
-# From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
-#	'it#8' tells UNIX that you have tabs every 8 columns.  This is a
-#		function of TIC, not the firmware.
-#	The clear key on a IIgs will do something like clear-screen,
-#		depending on what you're in.
-appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface:\
-	:am:bs:bw:eo:ms:\
-	:co#80:it#8:li#24:\
-	:bl=^G:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :cr=^M:do=^J:ho=^Y:\
-	:kC=^X:kD=\177:kb=^H:kd=^J:kl=^H:kr=^U:ku=^K:le=^H:nd=^\:\
-	:nw=^M^W:se=^N:sf=^W:so=^O:sr=^V:ta=^I:up=^_:
-# Apple //e with 80-column card, entry from BRL
-# The modem interface is permitted to discard LF (maybe DC1), otherwise
-# passing characters to the 80-column firmware via COUT (PR#3 assumed).
-# Auto-wrap does not work right due to newline scrolling delay, which also
-# requires that you set "stty cr2".
-# Note: Cursor addressing is only available via the Pascal V1.1 entry,
-# not via the BASIC PR#3 hook.  All this nonsense can be avoided only by
-# using a terminal emulation program instead of the built-in firmware.
-apple2e|Apple //e:\
-	:bw:ms:\
-	:co#80:li#24:\
-	:bl=^G:cd=4*\013:ce=4\035:cl=100\014:do=^J:ho=^Y:is=^R^N:\
-	:kb=^H:kd=^J:kl=^H:kr=^U:ku=^K:le=^H:me=^N:mr=^O:nw=100\r:\
-	:r1=^R^N:se=^N:sf=^W:so=^O:sr=^V:ta=^I:up=^_:
-# mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
-# 4.20, with incoming and outgoing terminals both on 0, emulation On.
-apple2e-p|Apple //e via Pascal:\
-	:cm=\036%r%+ %+ :kb=^H:kd=^J:kl=^H:tc=apple2e:
-# (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
-# Enable DC3/DC1 flow control with "stty ixon -ixany".
-apple-ae|ASCII Express:\
-	:am:bs:bw:ms:nx:xo:\
-	:co#80:it#8:li#24:\
-	:bl=500\007:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :cr=^M:do=^J:\
-	:ho=^Y:is=^R^N:kC=^X:kd=^J:kl=^H:kr=^U:ku=^K:le=^H:me=^N:\
-	:mr=^O:nd=^U:r1=^R^N:se=^N:sf=^W:so=^O:sr=^V:up=^_:
-appleII|apple ii plus:\
-	:am:bs:\
-	:co#80:it#8:li#24:\
-	:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :do=^J:ho=\E^Y:\
-	:is=\024T1\016:kd=^J:kr=^U:le=^H:me=^N:nd=^\:se=^N:so=^O:\
-	:ta=^I:up=^_:vb=\024G1\024T1:ve=^TC2:vs=^TC6:
-# Originally by Gary Ford 21NOV83
-# From: <ee178aci%sdcc7@SDCSVAX.ARPA>  Fri Oct 11 21:27:00 1985
-apple-80|apple II with smarterm 80 col:\
-	:am:bs:bw:\
-	:co#80:li#24:\
-	:bt=^R:cd=10*\013:ce=10\035:cl=10*\014:cm=\036%r%+ %+ :\
-	:cr=10*\r:do=^J:ho=^Y:le=^H:nd=^\:up=^_:
-apple-soroc|apple emulating soroc 120:\
-	:am:\
-	:co#80:li#24:\
-	:bl=^G:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:\
-	:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:sf=^J:up=^K:
-# From Peter Harrison, Computer Graphics Lab, San Francisco
-#   ucbvax!ucsfmis!harrison  .....uucp
-#   ucbvax!ucsfmis!harrison@BERKELEY   .......ARPA
-# "These two work.  If you don't have the inverse video chip for the
-# Apple with videx then remove the :so: and :se: fields."
-# (apple-videx: this used to be called DaleApple -- esr)
-apple-videx|Apple with videx videoterm 80 column board with inverse video:\
-	:am:bs:xn:\
-	:co#80:it#8:li#24:\
-	:cd=^K:ce=^]:cl=300\014:cm=\036%r%+ %+ :do=^J:ho=^Y:kd=^J:\
-	:kh=^Y:kl=^H:kr=^U:le=^H:me=^Z2:nd=^\:se=^Z2:so=^Z3:ta=^I:\
-	:up=^_:
-# My system [for reference] : Apple ][+, 64K, Ultraterm display card,
-#			      Apple Cat ][ 212 modem, + more all
-#			      controlled by ASCII Express: Pro.
-# From Dave Shaver <isucs1!shaver>
-apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell:\
-	:am:bs:eo:xt:\
-	:co#80:li#24:\
-	:ac=:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :ho=^Y:\
-	:is=^V4^W06\017\rVisible Bell Installed.\016\r\n:\
-	:nd=^\:se=^N:so=^O:up=^_:vb=^W35^W06:
-apple-uterm|Ultraterm for Apple micros:\
-	:am:bs:eo:xt:\
-	:co#80:li#24:\
-	:ac=:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :ho=^Y:\
-	:is=^V4^W06\016:nd=^\:se=^N:so=^O:up=^_:
-# from trwrba!bwong (Bradley W. Wong):
-#
-# This entry assumes that you are using an apple with the UCSD Pascal
-# language card.  SYSTEM.MISCINFO is assumed to be the same as that
-# supplied with the standard apple except that screenwidth should be set
-# using SETUP to 80 columns.  Note that the right arrow in not mapped in
-# this termcap entry.  This is because that key, on the Apple, transmits
-# a ^U and would thus preempt the more useful "up" function of vi.
-#
-# HMH 2/23/81
-apple80p|80-column apple with Pascal card:\
-	:am:bw:\
-	:co#80:li#24:\
-	:cd=^K:ce=^]:cl=^Y^L:cm=\036%r%+ %+ :ho=^Y:kl=^H:nd=^\\::\
-	:up=^_:
-#
-# Apple II+ equipped with Videx 80 column card
-#
-# Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
-# manually converted by D A Gwyn
-#
-# DO NOT use any terminal emulation with this data base, it works directly
-# with the Videx card.  This has been tested with vi 1200 baud and works fine.
-#
-# This works great for vi, except I've noticed in pre-R2, ^U will scroll back
-# 1 screen, while in R2 ^U doesn't.
-# For inverse alternate character set add:
-#	:as:=^O::ae:=^N:
-# (apple-v: added it#8 -- esr)
-apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520):\
-	:am:xn:\
-	:co#80:it#8:li#24:\
-	:bl=100\007:cd=16*\013:ce=^]:cl=16*\014:cm=\036%r%+ %+ :\
-	:cr=^M:do=^J:ho=^Y:kb=^H:kd=^J:kh=^Y:kl=^H:kr=^\:ku=^_:le=^H:\
-	:nd=^\:se=^Z2:sf=^J:so=^Z3:ta=8\011:up=^_:
-apple-videx3|vapple|Apple II with 80 col card:\
-	:am:bs:\
-	:co#80:li#24:\
-	:ce=\Ex:cl=\Ev:cm=\EY%+ %+ :ho=\EH:k0=\EP:k1=\EQ:k2=\ER:\
-	:k3=\E\s:k4=\E!:k5=\E":k6=\E#:k7=\E$:k8=\E%%%:k9=\E&:kd=\EB:\
-	:kh=\EH:kl=\ED:kr=\EC:ku=\EA:nd=\EC:up=\EA:
-#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
-aepro|Apple II+ running ASCII Express Pro--vt52:\
-	:bs:\
-	:co#80:li#24:\
-	:cd=\EJ:ce=\EK:cl=300\014:cm=\EY%+ %+ :ho=\EH:nd=\EC:\
-	:up=\EA:
-# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
-apple-vm80|ap-vm80|apple with viewmax-80:\
-	:bs:\
-	:co#80:li#24:\
-	:cd=300\013:ce=^]:cl=300\014:cm=100\036%+ %+ :ho=200\031:\
-	:nd=^\\::up=^_:
-
-#### Apple Lisa & Macintosh
-#
-
-# (lisa: changed :vs: to :ve: -- esr)
-lisa|apple lisa console display (black on white):\
-	:am:bs:eo:ms:\
-	:co#88:it#8:li#32:\
-	:ac=jdkclfmenbqattuvvuwsx`:ae=\E[10m:al=\E[L:as=\E[11m:\
-	:cd=\E[J:ce=\E[K:cl=^L:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:\
-	:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:is=\E>\E[m\014:kb=^H:\
-	:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\E[C:\
-	:se=\E[m:so=\E[7m:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[5l:\
-	:vi=\E[5h:
-liswb|apple lisa console display (white on black):\
-	:is=\E>\E[0;7m\014:se=\E[0;7m:so=\E[m:ue=\E[0;7m:\
-	:us=\E[4m:tc=lisa:
-
-# lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
-# :is: revised by Ferd Brundick <fsbrn@BRL.ARPA>
-#
-# These entries assume that the 'Auto Wraparound' is enabled.
-# Xon-Xoff flow control should also be enabled.
-#
-# The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
-# settings are in non-volatile memory and don't need to be reset upon login.
-# Also setting the number of columns glitches the screen annoyingly.
-# You can type "reset" to get them set.
-#
-lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation:\
-	:am:bs:pt:xn:xo:\
-	:co#80:it#8:kn#4:li#24:vt#3:\
-	:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:bl=^G:cd=\E[J:\
-	:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:do=^J:ho=\E[H:k0=\EOP:k1=\EOQ:\
-	:k2=\EOR:k3=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
-	:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=F1:l1=F2:l2=F3:l3=F4:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
-	:r1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r:\
-	:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:ue=\E[m:up=\E[A:us=\E[4m:
-# Lisaterm in 132 column ("wide") mode.
-lisaterm-w|Apple Lisa with Lisaterm in 132 column mode:\
-	:co#132:\
-	:kb=^H:kd=^J:kl=^H:tc=lisaterm:
-# Although MacTerminal has insert/delete line, it is commented out here
-# since it is much faster and cleaner to use the "lock scrolling region"
-# method of inserting and deleting lines due to the MacTerminal implementation.
-# Also, the "Insert/delete ch" strings have an extra character appended to them
-# due to a bug in MacTerminal V1.1.  Blink is disabled since it is not
-# supported by MacTerminal.
-mac|macintosh|Macintosh with MacTerminal:\
-	:xn:\
-	:dN#30:\
-	:dc=7\E[P:ei=:ic=9\E[@:im=:ip=7:mb@:tc=lisa:
-# Lisaterm in 132 column ("wide") mode.
-mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode:\
-	:co#132:tc=mac:
-
-# The AppKit Terminal.app descriptions all have names beginning with
-# "nsterm". Note that the statusline (-s) versions use the window
-# titlebar as a phony status line, and may produce warnings during
-# compilation as a result ("tsl uses 0 parameters, expected 1".) Ignore
-# these warnings, or even ignore these entries entirely. Apps which
-# need to position the cursor or do other fancy stuff inside the status
-# line won't work with these entries. They're primarily useful for
-# programs like Pine which provide simple notifications in the status
-# line. Please note that non-ASCII characters don't work right in the
-# status line, since Terminal.app incorrectly interprets their Unicode
-# codepoints as MacRoman codepoints.
-#
-# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
-#   "nsterm" to comply with the name length and case conventions and
-#   limitations of various software packages [notably Solaris terminfo
-#   and UNIX.] A single Apple_Terminal alias is retained for
-#   backwards-compatbility.
-#
-# * Added function key support (F1-F4). These only work in Terminal.app
-#   version 51, hopefully the capabilities won't cause problems for people
-#   using version 41.
-#
-# * Added "full color" (-c) entries which support the 16-color mode in
-#   version 51.
-#
-# * By default, version 51 uses UTF-8 encoding with broken altcharset
-#   support, so "ASCII" (-7) entries without altcharset support were
-#   added.
-
-# nsterm - AppKit Terminal.app
-#
-# Apple's Mac OS X includes a Terminal.app derived from the old NeXT
-# Terminal.app. It is a partial VT100 emulation with some xterm-like
-# extensions. This terminfo was written to describe versions 41
-# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
-# version 10.1) of Terminal.app.
-#
-# Terminal.app runs under the Mac OS X Quartz windowing system (and
-# other AppKit-supported windowing systems.)  On the Mac OS X machine I
-# use, the executable for Terminal.app is:
-# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
-#
-# If you're looking for a description of the full-screen system
-# console which runs under Apple's Darwin operating system on PowerPC
-# platforms, see the "xnuppc" entry instead.
-#
-# There were no function keys in version 41. In version 51, there are
-# four working function keys (F1, F2, F3 and F4.) The function keys
-# are included in all of these entries.
-#
-# It does not support mouse pointer position reporting. Under some
-# circumstances the cursor can be positioned using option-click; this
-# works by comparing the cursor position and the selected position,
-# and simulating enough cursor-key presses to move the cursor to the
-# selected position. This technique fails in all but the simplest
-# applications.
-#
-# It provides partial ANSI color support (background colors interacted
-# badly with bold in version 41, though, as reflected in :ncv:.) The
-# monochrome (-m) entries are useful if you've disabled color support
-# or use a monochrome monitor. The full color (-c) entries are useful
-# in version 51, which doesn't exhibit the background color bug. They
-# also enable an xterm-compatible 16-color mode.
-#
-# The configurable titlebar is set using xterm-compatible sequences;
-# it is used as a status bar in the statusline (-s) entries. Its width
-# depends on font sizes and window sizes, but 50 characters seems to
-# be the default for an 80x24 window.
-#
-# The MacRoman character encoding is used for some of the alternate
-# characters in the "MacRoman" entries; the "ASCII" (-7) entries
-# disable alternate character set support entirely, and the "VT100"
-# (-acs) entries rely instead on Terminal.app's own buggy VT100
-# graphics emulation, which seems to think the character encoding is
-# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
-# are useful in Terminal.app version 51, which supports UTF-8 and
-# other ASCII-compatible character encodings but does not correctly
-# implement VT100 graphics; once VT100 graphics are correctly
-# implemented in Terminal.app, the "VT100" (-acs) entries should be
-# usable in any ASCII-compatible character encoding [except perhaps
-# in UTF-8, where some experts argue for disallowing alternate
-# characters entirely.]
-#
-# Terminal.app reports "vt100" as the terminal type, but exports
-# several environment variables which may aid detection in a shell
-# profile (i.e. .profile or .login):
-#
-# TERM=vt100
-# TERM_PROGRAM=Apple_Terminal
-# TERM_PROGRAM_VERSION=41      # in Terminal.app version 41
-# TERM_PROGRAM_VERSION=51      # in Terminal.app version 51
-#
-# For example, the following Bourne shell script would detect the
-# correct terminal type:
-#
-# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
-# then
-#     export TERM
-#     if [ :"$TERM_PROGRAM_VERSION" = :41 ]
-#     then
-#         TERM="nsterm"
-#     else
-#         TERM="nsterm-c-7"
-#     fi
-# fi
-#
-# In a C shell derivative, this would be accomplished by:
-#
-# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
-#     if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
-#          if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
-#              setenv TERM "nsterm"
-#          else
-#              setenv TERM "nsterm-c-7"
-#          endif
-#     endif
-# endif
-
-# The '+' entries are building blocks
-nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset:\
-	:am:bw:ms:xn:xo:\
-	:co#80:it#8:li#24:\
-	:@8=\EOM:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:K1=\EOq:K2=\EOr:\
-	:K3=\EOs:K4=\EOp:K5=\EOn:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:\
-	:SA=\E[?7h:UP=\E[%dA:al=\E[L:bl=^G:cb=\E[1K:cd=\E[J:\
-	:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:ct=\E[3g:dl=\E[M:do=^J:ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:\
-	:k4=\EOS:kb=\177:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
-	:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:\
-	:mr=\E[7m:nd=\E[C:rc=\E8:\
-	:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m:\
-	:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:u6=\E[%i%d;%dR:u7=\E[6n:u8=\E[?1;2c:u9=\E[c:ue=\E[m:\
-	:up=\E[A:us=\E[4m:
-
-nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:as=^N:eA=\E(B\E)0:\
-	:..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;:\
-	:tc=nsterm+7:
-
-nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset:\
-	:ac=0#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245+\335-\366,\334.\377:\
-	:ae=^O:as=^N:eA=\E(B\E)0:\
-	:..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;:\
-	:tc=nsterm+7:
-
-nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support:\
-	:hs:\
-	:ws#50:\
-	:ds=\E]2;\007:fs=^G:ts=\E]2;:
-
-nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors):\
-	:Co#16:pa#256:\
-	:..AB=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm:\
-	:..AF=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm:\
-	:op=\E[0m:
-
-nsterm+c41|AppKit Terminal.app v41 color support:\
-	:Co#8:NC#37:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:
-
-# These are different combinations of the building blocks
-
-# ASCII charset (-7)
-nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome):\
-	:tc=nsterm+7:
-
-nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline):\
-	:tc=nsterm+s:tc=nsterm+7:
-
-nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color):\
-	:tc=nsterm+c41:tc=nsterm+7:
-
-nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color):\
-	:tc=nsterm+c:tc=nsterm+7:
-
-nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline):\
-	:tc=nsterm+s:tc=nsterm+c41:tc=nsterm+7:
-
-nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline):\
-	:tc=nsterm+s:tc=nsterm+c:tc=nsterm+7:
-
-# VT100 alternate-charset (-acs)
-nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome):\
-	:tc=nsterm+acs:
-
-nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline):\
-	:tc=nsterm+s:tc=nsterm+acs:
-
-nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color):\
-	:tc=nsterm+c41:tc=nsterm+acs:
-
-nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color):\
-	:tc=nsterm+c:tc=nsterm+acs:
-
-nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline):\
-	:tc=nsterm+s:tc=nsterm+c41:tc=nsterm+acs:
-
-nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline):\
-	:tc=nsterm+s:tc=nsterm+c:tc=nsterm+acs:
-
-# MacRoman charset
-nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome):\
-	:tc=nsterm+mac:
-
-nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline):\
-	:tc=nsterm+s:tc=nsterm+mac:
-
-nsterm|Apple_Terminal|AppKit Terminal.app v41+ w/MacRoman charset (color):\
-	:tc=nsterm+c41:tc=nsterm+mac:
-
-nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color):\
-	:tc=nsterm+c:tc=nsterm+mac:
-
-nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline):\
-	:tc=nsterm+s:tc=nsterm+c41:tc=nsterm+mac:
-
-nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline):\
-	:tc=nsterm+s:tc=nsterm+c:tc=nsterm+mac:
-
-# xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
-#
-# On PowerPC platforms, Apple's Darwin operating system uses a
-# full-screen system console derived from a NetBSD framebuffer
-# console. It is an ANSI-style terminal, and is not really VT-100
-# compatible.
-#
-# Under Mac OS X, this is the system console driver used while in
-# single-user mode [reachable by holding down Command-S during the
-# boot process] and when logged in using console mode [reachable by
-# typing ">console" at the graphical login prompt.]
-#
-# If you're looking for a description of the Terminal.app terminal
-# emulator which runs under the Mac OS X Quartz windowing system (and
-# other AppKit-supported windowing systems,) see the "nsterm"
-# entry instead.
-#
-# NOTE: Under Mac OS X version 10.1, the default login window does not
-# prompt for user name, instead requiring an icon to be selected from
-# a list of known users. Since the special ">console" login is not in
-# this list, you must make one of two changes in the Login Window
-# panel of the Login section of System Prefs to make the special
-# ">console" login accessible. The first option is to enable 'Show
-# "Other User" in list for network users', which will add a special
-# "Other..." icon to the graphical login panel. Selecting "Other..."
-# will present the regular graphical login prompt. The second option
-# is to change the 'Display Login Window as:' setting to 'Name and
-# password entry fields', which replaces the login panel with a
-# graphical login prompt.
-#
-# There are no function keys, at least not in Darwin 1.3.
-#
-# It has no mouse support.
-#
-# It has full ANSI color support, and color combines correctly with
-# all three supported attributes: bold, inverse-video and underline.
-# However, bold colored text is almost unreadable (bolding is
-# accomplished using shifting and or-ing, and looks smeared) so bold
-# has been excluded from the list of color-compatible attributes
-# [using (ncv)]. The monochrome entry (-m) is useful if you use a
-# monochrome monitor.
-#
-# There is one serious bug with this terminal emulation's color
-# support: repositioning the cursor onto a cell with non-matching
-# colors obliterates that cell's contents, replacing it with a blank
-# and displaying a colored cursor in the "current" colors. There is
-# no complete workaround at present [other than using the monochrome
-# (-m) entries,] but removing the (msgr) capability seemed to help.
-#
-# The "standout" chosen was simple reverse-video, although a colorful
-# standout might be more aesthetically pleasing. Similarly, the bold
-# chosen is the terminal's own smeared bold, although a simple
-# color-change might be more readable. The color-bold (-b) entries
-# uses magenta colored text for bolding instead. The fancy color (-f
-# and -f2) entries use color for bold, standout and underlined text
-# (underlined text is still underlined, though.)
-#
-# Apparently the terminal emulator does support a VT-100-style
-# alternate character set, but all the alternate character set
-# positions have been left blank in the font. For this reason, no
-# alternate character set capabilities have been included in this
-# description. The console driver appears to be ASCII-only, so (enacs)
-# has been excluded [although the VT-100 sequence does work.]
-#
-# The default Mac OS X and Darwin installation reports "vt100" as the
-# terminal type, and exports no helpful environment variables. To fix
-# this, change the "console" entry in /etc/ttys from "vt100" to
-# "xnuppc-WxH", where W and H are the character dimensions of your
-# console (see below.)
-#
-# The font used by the terminal emulator is apparently one originally
-# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
-# file includes descriptions for the following geometries:
-#
-#     Pixels        Characters   Entry Name (append -m for monochrome)
-#    -------------------------------------------------------------------
-#     640x400       80x25        xnuppc-80x25
-#     640x480       80x30        xnuppc-80x30
-#     720x480       90x30        xnuppc-90x30
-#     800x600       100x37       xnuppc-100x37
-#     896x600       112x37       xnuppc-112x37
-#     1024x640      128x40       xnuppc-128x40
-#     1024x768      128x48       xnuppc-128x48
-#     1152x768      144x48       xnuppc-144x48
-#     1280x1024     160x64       xnuppc-160x64
-#     1600x1024     200x64       xnuppc-200x64
-#     1600x1200     200x75       xnuppc-200x75
-#     2048x1536     256x96       xnuppc-256x96
-#
-# The basic "xnuppc" entry includes no size information, and the
-# emulator includes no reporting capability, so you'll be at the mercy
-# of the TTY device (which reports incorrectly on my hardware.) The
-# color-bold entries do not include size information.
-
-# The '+' entries are building blocks
-xnuppc+basic|Darwin PowerPC Console basic capabilities:\
-	:am:mi:ut:xn:\
-	:it#8:\
-	:DO=\E[%dB:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:K5=\EOn:\
-	:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
-	:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
-	:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=\E[B:ds=\E]2;\007:\
-	:ho=\E[H:kb=\177:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
-	:ks=\E[?1h\E=:ku=\EOA:le=\E[D:md=\E[1m:me=\E[m\017:\
-	:mr=\E[7m:nd=\E[C:rc=\E8:\
-	:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
-	:..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m:\
-	:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:\
-	:up=\E[A:us=\E[4m:
-
-xnuppc+c|Darwin PowerPC Console ANSI color support:\
-	:Co#8:NC#32:pa#64:\
-	:AB=\E[4%dm:AF=\E[3%dm:op=\E[37;40m:
-
-xnuppc+b|Darwin PowerPC Console color-bold support:\
-	:NC#32:\
-	:md=\E[35m:\
-	:..sa=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m:\
-	:tc=xnuppc+basic:
-
-xnuppc+f|Darwin PowerPC Console fancy color support:\
-	:NC#35:\
-	:..sa=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%p3%t;7%;m:\
-	:so=\E[33;44m:us=\E[36;4m:tc=xnuppc+b:
-
-xnuppc+f2|Darwin PowerPC Console alternate fancy color support:\
-	:NC#35:\
-	:md=\E[33m:\
-	:..sa=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%p3%t;7%;m:\
-	:so=\E[31;47m:us=\E[34m:tc=xnuppc+basic:
-
-# Building blocks for specific screen sizes
-xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels):\
-	:co#80:li#25:
-
-xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels):\
-	:co#80:li#30:
-
-xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels):\
-	:co#90:li#30:
-
-xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels):\
-	:co#100:li#37:
-
-xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels):\
-	:co#112:li#37:
-
-xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels):\
-	:co#128:li#40:
-
-xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels):\
-	:co#128:li#48:
-
-xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels):\
-	:co#144:li#48:
-
-xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels):\
-	:co#160:li#64:
-
-xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels):\
-	:co#200:li#64:
-
-xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels):\
-	:co#200:li#75:
-
-xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels):\
-	:co#256:li#96:
-
-# These are different combinations of the building blocks
-
-xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome):\
-	:tc=xnuppc+basic:
-
-xnuppc|darwin|Darwin PowerPC Console (color):\
-	:tc=xnuppc+c:tc=xnuppc+basic:
-
-xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold):\
-	:tc=xnuppc+b:
-
-xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold):\
-	:tc=xnuppc+b:tc=xnuppc+c:
-
-xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome):\
-	:tc=xnuppc+f:
-
-xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color):\
-	:tc=xnuppc+f:tc=xnuppc+c:
-
-xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome):\
-	:tc=xnuppc+f2:
-
-xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color):\
-	:tc=xnuppc+f2:tc=xnuppc+c:
-
-# Combinations for specific screen sizes
-xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25:\
-	:tc=xnuppc+80x25:tc=xnuppc+basic:
-
-xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25:\
-	:tc=xnuppc+c:tc=xnuppc+80x25:tc=xnuppc+basic:
-
-xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30:\
-	:tc=xnuppc+80x30:tc=xnuppc+basic:
-
-xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30:\
-	:tc=xnuppc+c:tc=xnuppc+80x30:tc=xnuppc+basic:
-
-xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30:\
-	:tc=xnuppc+90x30:tc=xnuppc+basic:
-
-xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30:\
-	:tc=xnuppc+c:tc=xnuppc+90x30:tc=xnuppc+basic:
-
-xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37:\
-	:tc=xnuppc+100x37:tc=xnuppc+basic:
-
-xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37:\
-	:tc=xnuppc+c:tc=xnuppc+100x37:tc=xnuppc+basic:
-
-xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37:\
-	:tc=xnuppc+112x37:tc=xnuppc+basic:
-
-xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37:\
-	:tc=xnuppc+c:tc=xnuppc+112x37:tc=xnuppc+basic:
-
-xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40:\
-	:tc=xnuppc+128x40:tc=xnuppc+basic:
-
-xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40:\
-	:tc=xnuppc+c:tc=xnuppc+128x40:tc=xnuppc+basic:
-
-xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48:\
-	:tc=xnuppc+128x48:tc=xnuppc+basic:
-
-xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48:\
-	:tc=xnuppc+c:tc=xnuppc+128x48:tc=xnuppc+basic:
-
-xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48:\
-	:tc=xnuppc+144x48:tc=xnuppc+basic:
-
-xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48:\
-	:tc=xnuppc+c:tc=xnuppc+144x48:tc=xnuppc+basic:
-
-xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64:\
-	:tc=xnuppc+160x64:tc=xnuppc+basic:
-
-xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64:\
-	:tc=xnuppc+c:tc=xnuppc+160x64:tc=xnuppc+basic:
-
-xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64:\
-	:tc=xnuppc+200x64:tc=xnuppc+basic:
-
-xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64:\
-	:tc=xnuppc+c:tc=xnuppc+200x64:tc=xnuppc+basic:
-
-xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75:\
-	:tc=xnuppc+200x75:tc=xnuppc+basic:
-
-xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75:\
-	:tc=xnuppc+c:tc=xnuppc+200x75:tc=xnuppc+basic:
-
-xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96:\
-	:tc=xnuppc+256x96:tc=xnuppc+basic:
-
-xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96:\
-	:tc=xnuppc+c:tc=xnuppc+256x96:tc=xnuppc+basic:
-
-#### Radio Shack/Tandy
-#
-
-# (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
-# I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
-# From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
-coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II:\
-	:am:bs:\
-	:co#80:it#8:li#24:\
-	:al=^_0:bl=^G:cd=^K:ce=^D:cl=5*\014:cm=2\002%r%+ %+ :\
-	:dl=^_1:do=^J:ho=^A:kd=^J:kl=^H:kr=^I:ku=^L:le=^H:mb=^_":\
-	:md=\E\:^A:me=\037!\E\:\0:mr=^_\s:nd=^F:se=^_!:so=^_\s:\
-	:ue=^_#:up=^I:us=^_":ve=^E!:vi=^E\s:
-# (trs2: removed obsolete ":nl=^_:" -- esr)
-trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M:\
-	:am:bs:ms:\
-	:co#80:it#8:li#24:\
-	:al=^D:bl=^G:cd=^B:ce=^A:cl=^L:cm=\EY%+ %+ :cr=^M:dl=^K:\
-	:do=^_:ho=^F:kb=^H:kd=^_:kl=^\:kr=^]:ku=^^:le=^H:me=^O:nd=^]:\
-	:se=^O:sf=^J:so=^N:ta=^I:up=^^:
-# From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
-# (This had extension capabilities
-#	:BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
-#	:CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
-# I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
-trs16|trs-80 model 16 console:\
-	:am:bs:\
-	:co#80:it#8:li#24:\
-	:ac=jak`l_mbquvewcxs:ae=\ERg:al=\EL:as=\ERG:bl=^G:cd=\EJ:\
-	:ce=\EK:cl=^L:cm=\EY%+ %+ :cr=^M:dc=\EQ:dl=\EM:do=\EB:ei=:\
-	:ho=\EH:ic=\EP:im=:k0=^A:k1=^B:k2=^D:k3=^L:k4=^U:k5=^P:k6=^N:\
-	:k7=^S:kb=^H:kd=\EB:kh=^W:kl=\ED:kr=\EC:ku=\EA:l0=f1:l1=f2:\
-	:l2=f3:l3=f4:l4=f5:l5=f6:l6=f7:l7=f8:le=^H:me=\ER@:nd=\EC:\
-	:pf=\E]+:po=\E]=:se=\ER@:sf=^J:so=\ERD:ta=^I:up=\EA:ve=\ERC:\
-	:vi=\ERc:
-
-#### Atari ST
-#
-
-# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
-atari|atari st:\
-	:am:bs:\
-	:co#80:it#8:li#25:\
-	:al=\EL:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :dl=\EM:do=\EB:\
-	:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=\ED:me=\Eq:nd=\EC:se=\Eq:\
-	:so=\Ep:sr=\EI:ta=^I:up=\EA:
-# UniTerm terminal program for the Atari ST:  49-line VT220 emulation mode
-# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
-uniterm|uniterm49|UniTerm VT220 emulator with 49 lines:\
-	:li#49:\
-	:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H:\
-	:tc=vt220:
-# MiNT VT52 emulation. 80 columns, 25 rows.
-# MiNT is Now TOS, the operating system which comes with all Ataris now
-# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
-# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
-# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
-st52|Atari ST with VT52 emulation:\
-	:am:km:\
-	:co#80:li#25:\
-	:K1=\E#7:K2=\E#9:K3=\E#5:K4=\E#1:K5=\E#3:al=\EL:bl=^G:\
-	:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:dl=\EM:do=\EB:\
-	:ho=\EH:k0=\E#D:k1=\E#;:k2=\E#<:k3=\E#=:k4=\E#>:k5=\E#?:\
-	:k6=\E#@:k7=\E#A:k8=\E#B:k9=\E#C:kA=\E#R:kC=\E#7:kF=\E#2:\
-	:kR=\E#8:kb=^H:kd=\E#P:kh=\E#G:kl=\E#K:kr=\E#M:ku=\E#H:\
-	:l0=f10:le=\ED:me=\Eq:nd=\EC:nw=^M^J:r1=\Ez_\Eb@\EcA:\
-	:rc=\Ek:sc=\Ej:se=\Eq:sf=^J:so=\Ep:sr=\EI:ta=^I:te=:ti=\Ee:\
-	:up=\EA:ve=\Ee:vi=\Ef:
-
-#### Commodore Business Machines
-#
-# Formerly located in West Chester, PA; went spectacularly bust in 1994
-# after years of shaky engineering and egregious mismanagement.  Made one
-# really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
-# C-128, VIC-20).  The C-64 is said to have been the most popular machine
-# ever (most units sold); they can still be found gathering dust in closets
-# everywhere.
-#
-
-# From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
-# Added a few more entries, converted caret-type control sequence (^x) entries
-# to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
-# Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
-#
-# :as:, :ae:			Support for alternate character sets.
-# :ve=\E[\040p:vi=\E[\060\040p:	cursor visible/invisible.
-# :xn:  vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
-#     This one appears to fix a problem I always had with a line ending
-#     at 'width+1' (I think) followed by a blank line in vi. The blank
-#     line tended to disappear and reappear depending on how the screen
-#     was refreshed. Note that this is probably needed only if you use
-#     something like a Dnet Fterm with the window sized to some peculiar
-#     dimension larger than 80 columns.
-# :k0=\E9~:	map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
-# (amiga: removed obsolete :kn#10:,
-# also added empty <acsc> to suppress a warning --esr)
-amiga|Amiga ANSI:\
-	:am:bs:bw:xn:\
-	:co#80:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ac=:\
-	:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=:\
-	:ho=\E[H:ic=\E[@:im=:is=\E[20l:k0=\E[9~:k1=\E[0~:k2=\E[1~:\
-	:k3=\E[2~:k4=\E[3~:k5=\E[4~:k6=\E[5~:k7=\E[6~:k8=\E[7~:\
-	:k9=\E[8~:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:\
-	:mb=\E[7;2m:md=\E[1m:me=\E[m:mh=\E[2m:mk=\E[8m:mr=\E[7m:\
-	:nd=\E[C:r1=\Ec:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ue=\E[m:\
-	:up=\E[A:us=\E[4m:ve=\E[ p:vi=\E[0 p:
-
-# From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
-# (amiga: added empty <acsc> to suppress a warning.
-# I'm told this entry screws up badly with AS225, the Amiga
-# TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
-amiga-h|Hans Verkuil's Amiga ANSI:\
-	:bs:bw:ms:\
-	:co#80:li#24:\
-	:DC=\233%dP:DO=\233%dB:IC=\233%d@:LE=\233%dD:RI=\233%dC:\
-	:SF=\233%dS:SR=\233%dT:UP=\233%dA:ac=:ae=^O:as=^N:bl=^G:\
-	:bt=\233Z:cd=\233J:ce=\233K:cl=\233H\233J:\
-	:cm=\233%i%d;%dH:cr=^M:dc=\233P:do=\233B:ec=\233%dP:ei=:\
-	:ho=\233H:ic=\233@:im=:is=\23320l:k0=\2339~:k1=\2330~:\
-	:k2=\2331~:k3=\2332~:k4=\2333~:k5=\2334~:k6=\2335~:\
-	:k7=\2336~:k8=\2337~:k9=\2338~:kD=\177:kb=^H:kd=\233B:\
-	:kl=\233D:kr=\233C:ku=\233A:le=\233D:mb=\2337;2m:\
-	:md=\2331m:me=\2330m:mh=\2332m:mk=\2338m:mr=\2337m:\
-	:nd=\233C:nw=\233B\r:r1=\Ec:se=\2330m:sf=\233S:so=\2337m:\
-	:sr=\233T:ta=^I:te=\233?7h:ti=\233?7l:ue=\2330m:up=\233A:\
-	:us=\2334m:vb=^G:ve=\233 p:vi=\2330 p:
-
-# From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
-amiga-8bit|Amiga ANSI using 8-bit controls:\
-	:AL=\233%dL:DL=\233%dM:SF@:SR@:ac=:al=\233L:dl=\233M:\
-	:sf=\204:sr=\215:tc=amiga-h:
-
-# From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
-# requires use of appropriate preferences settings.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-amiga-vnc|Amiga using VNC console (black on light gray):\
-	:ND:am:da:db:ms:\
-	:BT#1:Co#16:NC#0:co#80:li#24:lm#0:pa#256:\
-	:%1=\E[?~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
-	:IC=\E[%d@:Km=\E[M:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:\
-	:SR=\E[%dT:UP=\E[%dA:al=\E[1L:bl=^G:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:\
-	:dl=\E[1M:do=\E[B:ei=:ic=\E[@:im=:\
-	:is=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h:\
-	:k0=\E[9~:k1=\E[0~:k2=\E[1~:k3=\E[2~:k4=\E[3~:k5=\E[4~:\
-	:k6=\E[5~:k7=\E[6~:k8=\E[7~:k9=\E[8~:kB=\233Z:kD=\177:\
-	:kH=\E[45~:kN=\E[42~:kP=\E[41~:kb=^H:kd=\E[B:ke=\E[?1l:\
-	:kh=\E[44~:kl=\E[D:kr=\E[C:ks=\E[?1h:ku=\E[A:le=\E[D:\
-	:mb=\E[7;2m:md=\E[1m:me=\E[0m\017\E[30;85;>15m:mh=\E[2m:\
-	:mk=\E8m:mr=\E[7m:nd=\E[C:nw=\EE:oc=\E[0m:r1=\Ec:\
-	:r2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h:\
-	:se=\E[21m:sf=\ED:so=\E[1m:sr=\EM:te=\E[?7h\E[r\E[J:\
-	:ti=\E[?7h:ue=\E[24m:up=\E[A:us=\E[4m:vb=^G:\
-	:ve=\E[p\E[>?6l:vi=\E[0p:vs=\E[>?6h:
-
-# Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
-# 	I'm trying to write a termcap for a commodore b-128, and I'm
-# having a little trouble. I've had to map most of my control characters
-# to something that unix will accept (my delete-char is a ctrl-t, etc),
-# and create some functions (like cm), but thats life.
-# 	The problem is with the arrow keys - right, and up work fine, but
-# left deletes the previous character and down I just can't figure out.
-# Jove knows what I want, but I don't know what it's sending to me (it
-# isn't thats bound to next-line in jove).
-# 	Anybody got any ideas? Here's my termcap.
-# DAG -- I changed his "^n" entries to "\n"; see if that works.
-#
-commodore|b-128|Commodore B-128 micro:\
-	:am:bw:\
-	:co#80:dN#20:li#24:pb#150:\
-	:al=10\Ei:bc=^H:ce=10\Eq:cl=10\E\006:cm=20\E\013%2,%2,:\
-	:cr=^M:dc=10*\177:dl=10*\Ed:do=^J:ei=:ho=\E^E:ic=5\E\n:im=:\
-	:kd=^J:kh=\E^E:kl=^B:kr=^F:ku=^P:nd=^F:nl=^M:ta=5\011:up=^P:
-
-#### North Star
-#
-# North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
-northstar|North Star Advantage:\
-	:bs:\
-	:co#80:li#24:\
-	:cd=200\017:ce=200\016:cl=200\004:cm=1\E=%+ %+ :\
-	:ho=200\034\032:
-
-#### Osborne
-#
-# Thu Jul  7 03:55:16 1983
-#
-# As an aside, be careful; it may sound like an anomaly on the
-# Osborne, but with the 80-column upgrade, it's too easy to
-# enter lines >80 columns!
-#
-# I've already had several comments...
-# The Osborne-1 with the 80-col option is capable of being
-# 52, 80, or 104 characters wide; default to 80 for compatibility
-# with most systems.
-#
-# The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
-osborne-w|osborne1-w|osborne I in 104-column mode:\
-	:ms:ul:xt:\
-	:co#104:li#24:\
-	:al=\EE:bl=^G:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:\
-	:do=^J:ei=:ic=\EQ:im=:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:\
-	:se=\E(:sf=^J:so=\E):ue=\Em:up=^K:us=\El:
-# Osborne I	from ptsfa!rhc (Robert Cohen) via BRL
-osborne|osborne1|osborne I in 80-column mode:\
-	:am:bs:mi:ms:ul:xs:\
-	:co#80:dB#4:li#24:\
-	:al=\EE:ce=\ET:cl=^Z:cm=\E=%+ %+ :dc=4\EW:dl=\ER:do=^J:ei=:\
-	:im=\EQ:is=^Z:kb=^H:kd=^J:kl=^H:kr=^L:ku=^K:le=\010:nd=^L:\
-	:se=\E):so=\E(:ue=\Em:up=^K:us=\El:
-#
-# Osborne Executive definition from BRL
-# Similar to tvi920
-# Added by David Milligan and Tom Smith (SMU)
-osexec|Osborne executive:\
-	:am:bs:\
-	:co#80:li#24:sg#1:ug#1:\
-	:al=\EE:bl=^G:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:ct=\E3:\
-	:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:\
-	:is=\Eq\Ek\Em\EA\Ex0:k0=^A@\r:k1=^AA\r:k2=^AB\r:k3=^AC\r:\
-	:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:k8=^AH\r:k9=^AI\r:\
-	:kb=^H:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:nl=^J:se=\Ek:\
-	:so=\Ej:st=\E1:ue=\Em:up=^K:us=\El:
-
-#### Console types for obsolete UNIX clones
-#
-# Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
-# machines that tried to emulate the UNIX look'n'feel.  Coherent and Venix
-# were commercial, Minix an educational tool sold in conjunction with a book.
-# Memory-segmentation limits and a strong tendency to look like V7 long after
-# it was obsolete made all three pretty lame.  Venix croaked early.  Coherent
-# and Minix were ported to 32-bit Intel boxes, only to be run over by a
-# steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
-# Coherent's vendor, the Mark Williams Company, went belly-up in 1994.  There
-# are also, I'm told, Minix ports that ran on Amiga and Atari machines and
-# even as single processes under SunOS and the Macintosh OS.
-#
-
-# This is the entry provided with minix 1.7.4, with bogus :ri: removed.
-minix|minix console (v1.7):\
-	:am:xn:\
-	:co#80:it#8:li#25:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[0J:\
-	:ce=\E[K:cl=\E[H\E[0J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:\
-	:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:is=\E[0m:k0=\E[Y:\
-	:k1=\E[V:k2=\E[U:k3=\E[T:k4=\E[S:k5=\E[G:kb=^H:kd=\E[B:\
-	:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:l0=End:l1=PgUp:l2=PgDn:\
-	:l3=Num +:l4=Num -:l5=Num 5:le=^H:mb=\E[5m:md=\E[1m:\
-	:me=\E[0m:mr=\E[7m:nd=\E[C:nw=^M^J:se=\E[0m:sf=^J:so=\E[7m:\
-	:sr=\EM:ta=^I:ue=\E[0m:up=\E[A:us=\E[4m:
-# Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
-minix-old|minix console (v1.5):\
-	:xo:\
-	:co#80:it#8:li#25:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[0J:\
-	:ce=\E[K:cl=\E[H\E[0J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:\
-	:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:k0=\E[Y:k1=\E[V:\
-	:k2=\E[U:k3=\E[T:k4=\E[S:k5=\E[G:kb=^H:kd=\E[B:kh=\E[H:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
-	:mr=\E[7m:nd=\E[C:nw=^M^J:se=\E[0m:sf=^J:so=\E[7m:sr=\EM:\
-	:ta=^I:ue=\E[0m:up=\E[A:us=\E[4m:
-# The linewrap option can be specified by editing /usr/include/minix/config.h
-# before recompiling the minix 1.5 kernel.
-minix-old-am|minix console with linewrap:\
-	:am:tc=minix-old:
-
-pc-minix|minix console on an Intel box:\
-	:tc=klone+acs:tc=minix:
-
-# According to the Coherent 2.3 manual, the PC console is similar
-# to a z19. The differences seem to be (1) 25 lines, (2) no status
-# line, (3) standout is broken, (4) ins/del line is broken, (5)
-# has blinking and bold.
-pc-coherent|pcz19|coherent|IBM PC console running Coherent:\
-	:am:mi:\
-	:co#80:it#8:li#25:\
-	:bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :cr=^M:dc=\EN:\
-	:do=\EB:ei=\EO:ho=\EH:im=\E@:kb=^H:kd=\EB:kh=\EH:kl=\ED:\
-	:kr=\EC:ku=\EA:le=^H:me=\Eq:nd=\EC:se=\Eq:sf=^J:so=\Ep:\
-	:sr=\EI:ta=^I:up=\EA:
-
-# According to the Venix 1.1 manual, the PC console is similar
-# to a DEC vt52.  Differences seem to be (1) arrow keys send
-# different strings, (2) enhanced standout, (3) added insert/delete line.
-# Note in particular that it doesn't have automatic margins.
-# There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
-# not described here because this derives from an old termcap entry.
-pc-venix|venix|IBM PC console running Venix:\
-	:co#80:it#8:li#25:\
-	:al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:\
-	:dl=\EM:do=^J:kb=^H:kd=\EP:kh=\EG:kl=\EK:kr=\EM:ku=\EH:le=^H:\
-	:nd=\EC:sf=^J:sr=\EI:ta=^I:up=\EA:
-
-#### Miscellaneous microcomputer consoles
-#
-# If you know anything more about any of these, please tell me.
-#
-
-# The MAI Basic Four computer was obsolete at the end of the 1980s.
-# It may be used as a terminal by putting it in "line" mode as seen on
-# one of the status lines.
-# Initialization is similar to CIT80. :is: will set ANSI mode for you.
-# Hardware tabs set by :if: at 8-spacing.  Auto line wrap causes glitches so
-# wrap mode is reset by :vs:.  Using :sf:=\E[S caused errors so I
-# used \ED instead.
-# From: bf347@lafn.org (David Lawyer), 28 Jun 1997
-mai|basic4|MAI Basic Four in ansi mode:\
-	:am:da:db:mi:ms:\
-	:co#82:it#8:li#25:\
-	:al=\E[L:bl=^G:cd=^_:ce=^^:cl=^]^_:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:dc=\E[1P:dl=\E[M:do=^J:ei=\E[4l:ho=^]:\
-	:if=/usr/lib/tabset/vt100:im=\E[4h:\
-	:is=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:\
-	:k8=\EOW:kb=^H:kd=\EOB:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=^X:nw=^M\ED:rc=\E8:\
-	:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\E[T:ta=^I:ue=\E[m:up=^Z:\
-	:us=\E[4m:ve=\E[?7h:vs=\E[?7l:
-# basis from Peter Harrison, Computer Graphics Lab, San Francisco
-#   ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
-#
-# On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
-# The Basis 108 was a Apple II clone, manufactured by the "Basis
-# Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
-# about 1,5 km from where I live, but doesn't build own computers any
-# more). A Basis 108 featured a really heavy (cast aluminum?) case, was
-# equipped with one or two 5.25" disk drives, had a monochrome and color
-# video output for a TV set or a dedicated monitor and several slots for
-# Apple II cards. Basis 108 were quite popular at german schools before
-# the advent of the IBM PC. They run, for example, the UCSD Pascal
-# development system (which I used even in 1993 to program the steering
-# and data recording for our school's experimental solar panel :), Apple DOS
-# or CP/M.
-# (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
-basis|BASIS108 computer with terminal translation table active:\
-	:cd=\EY:ce=\ET:cl=300\E*:do=5000\n:kb=^H:kd=^J:kl=^H:kr=^L:\
-	:ku=^K:me=\E):se=\E):so=\E(:tc=adm3a:
-# luna's BMC terminal emulator
-luna|luna68k|LUNA68K Bitmap console:\
-	:co#88:li#46:tc=ansi-mini:
-megatek|pegasus workstation terminal emulator:\
-	:am:os:\
-	:co#83:li#60:
-# The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
-# interface (pre-Macintosh by several years) that went nowhere.
-xerox820|x820|Xerox 820:\
-	:am:\
-	:co#80:li#24:\
-	:bl=^G:cd=^Q:ce=^X:cl=1^Z:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:\
-	:le=^H:nd=^L:sf=^J:up=^K:
-
-#### Videotex and teletext
-#
-
-# \E\:1}	switch to te'le'informatique mode (ascii terminal/ISO 6429)
-# \E[?3l	80 columns
-# \E[?4l	scrolling on
-# \E[12h	local echo off
-# \Ec		reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
-# \E)0		G1 DEC set (line graphics)
-#
-# From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
-m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique:\
-	:bs:es:hs:xn:\
-	:co#80:it#8:li#24:sg#0:ug#0:ws#72:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:\
-	:ac=aaffggjjkkllmmnnooqqssttuuvvwwxx:ae=^O:al=\E[L:\
-	:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
-	:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:\
-	:fs=^J:ho=\E[H:i1=\E\:1}\Ec\E[?4l\E[12h:\
-	:i2=\E[?3l kbs=\010:im=\E[4h:ip=7:is=\Ec\E[12h\E)0:\
-	:k0=\EOp:k1=\EOq:k2=\EOr:k3=\EOs:k4=\EOt:k5=\EOu:k6=\EOv:\
-	:k7=\EOw:k8=\EOx:k9=\EOy:k;=\EOp:kA=\E[4l:kC=\E[2J:kD=\E[P:\
-	:kI=\E[4h:kL=\E[M:kN=\EOn:kP=\EOR:kd=\E[B:kh=\E[H:kl=\E[D:\
-	:kr=\E[C:ku=\E[A:le=\E[D:ll=\E[24;80H:mb=\E[5m:md=\E[1m:\
-	:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M^J:ps=\E[i:\
-	:r1=\Ec\E[?4l\E[12h:r2=\Ec\E)0:rc=\E8:sc=\E7:se=\E[27m:\
-	:sf=^J:so=\E[7m:sr=\EM:ta=^I:ts=^_@A:u6=\E[%i%d;%dR:\
-	:u7=\E[6n:ue=\E[24m:up=\E[A:us=\E[4m:vb=^G:ve=\E[<1l:\
-	:vi=\E[<1h:
-
-# From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
-#
-minitel1|minitel 1:\
-	:am:bw:es:hs:hz:ms:\
-	:Co#8:co#40:li#24:pa#8:\
-	:..Sf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;:\
-	:ac=+.,,./f0g1:bl=^G:ce=^X:cl=^L:cm=\037%+A%+A:cr=^M:do=^J:\
-	:eA=^Y:fs=^J:ho=^^:is=\E;`ZQ\E\:iC\E\:iE\021:le=^H:mb=\EH:\
-	:me=\EI\E\\:mr=\E]:nd=^I:nw=^M^J:op=\EG:rp=%.\022%+?:\
-	:..sa=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;:se=\E\\:\
-	:sf=^J:so=\E]:sr=^K:ts=\037@%+A:up=^K:ve=^Q:vi=^T:
-# is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
-minitel1b|minitel 1-bistandard (in 40cols mode):\
-	:mi:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:al=\E[L:cb=\E[1K:cd=\E[J:dc=\E[P:\
-	:dl=\E[M:ei=\E[4l:i1=\E;iYA\E;jYC:im=\E[4h:kA=\E[L:\
-	:kC=\E[2J:kD=\E[P:kE=^X:kI=\E[4h:kL=\E[M:kd=\E[B:kh=\E[H:\
-	:kl=\E[D:kr=\E[C:ks=\E;iYA\E;jYC:kt=^I:ku=\E[A:\
-	:tc=minitel1:
-# :ke: posait des problemes (logout en sortant de vi).
-minitel1b-80|minitel 1-bistandard (standard teleinformatique):\
-	:am@:bw@:hz@:\
-	:Co@:co#80:it#8:pa@:\
-	:@8=\EOM:Sf@:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:ho=\E[H:\
-	:i1@:is@:k0=\EOp:k1=\EOq:k2=\EOr:k3=\EOs:k4=\EOt:k5=\EOu:\
-	:k6=\EOv:k7=\EOw:k8=\EOx:k9=\EOy:ke@:ks@:mb=\E[5m:md=\E[1m:\
-	:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:op@:rc=\E8:rp@:\
-	:..sa=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m:\
-	:sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[24m:\
-	:up=\E[A:us=\E[4m:ve=\037@A\021\n:vi=\037@A\024\n:\
-	:tc=minitel1b:
-
-######## OBSOLETE VDT TYPES
-#
-# These terminals are *long* dead -- these entries are retained for
-# historical interest only.
-
-#### Amtek Business Machines
-#
-
-# (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
-# but these caps were commented out in 8.3; also, removed overridden
-# ":do=^J:" -- esr)
-abm80|amtek business machines 80:\
-	:am:bs:bw:\
-	:co#80:li#24:\
-	:al=\E^Z:bt=^T:cd=\E^X:ce=\E^O:cl=\E^\:cm=\E\021%r%+ %+ :\
-	:dl=\E^S:do=\E^K:ho=\E^R:le=^H:nd=^P:up=\E^L:
-
-#### Bell Labs blit terminals
-#
-# These were AT&T's official entries.  The 5620 FAQ maintained by
-# David Breneman <daveb@dgtl.com> has this to say:
-#
-#  Actually, in the beginning was the Jerq, and the Jerq was white with a
-#  green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
-#  was good.  But lo, upon the horizon loomed a mighty management-type person
-#  (known now only by the initials VP) who said, the mighty Jerq must stay
-#  alone, and could not go forth into the world. So Locanthi and Pike put the
-#  Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
-#  world. And the Jerq lived the rest of its days in research, but never
-#  strayed from those paths.
-#
-#  In all seriousness, the Blit was originally known as the Jerq, but when
-#  it started to be shown outside of the halls of the Bell Labs Research
-#  organization, the management powers that be decided that the name could
-#  not remain. So it was renamed to be Blit. This was in late 1981.
-#
-# (The AT&T 5620 was the commercialized Blit.  Its successors were the 630,
-# 730, and 730+.)
-#
-
-blit|jerq|blit running teletype rom:\
-	:am:eo:ul:xo:\
-	:co#87:it#8:li#72:\
-	:AL=\EF%+ :DC=\Ee%+ :DL=\EE%+ :IC=\Ef%+ :al=\EF!:bl=^G:\
-	:ce=\EK:cl=^L:cm=\EY%r%+ %+ :cr=^M:dc=\Ee!:dl=\EE!:do=^J:\
-	:ei=:ic=\Ef!:im=:k1=\Ex:k2=\Ey:k3=\Ez:kb=^H:kd=\EB:kl=\ED:\
-	:kr=\EC:ku=\EA:le=\ED:nd=\EC:sf=^J:ta=^I:up=\EA:
-
-# (cbblit: here's a BSD termcap that says :do=\EG: -- esr)
-cbblit|fixterm|blit running columbus code:\
-	:co#88:\
-	:cd=\EJ:ei=\ER:ic@:im=\EQ:pO=\EP%03:pf=^T:po=^R:se=\EV!:\
-	:so=\EU!:ue=\EV":us=\EU":vb=\E^G:tc=blit:
-
-oblit|ojerq|first version of blit rom:\
-	:am:da:db:eo:mi:ul:xo:\
-	:co#88:it#8:li#72:\
-	:AL=\Ef%+ :DL=\Ee%+ :al=\EF:bl=^G:cd=\EJ:ce=\EK:cl=^L:\
-	:cm=\EY%r%+ %+ :cr=^M:dc=\EO:dl=\EE:do=^J:ei=\ER:im=\EQ:\
-	:kb=^H:le=\ED:nd=\EC:sf=^J:ta=^I:up=\EA:vb=\E^G:
-
-#### Bolt, Beranek & Newman (bbn)
-#
-# The BitGraph was a product of the now-defunct BBN Computer Corporation.
-# The parent company, best known as the architects of the Internet, is
-# still around.
-#
-# Jeff DelPapa <dp@world.std.com> writes:
-# The bitgraph was a large white box that contained a monochrome bitmap
-# display, and a 68000 to run it.  You could download code and run it on
-# the cpu, it had 128kb (I think) of memory.  I used one in the late
-# 70's, sure beat a vt100.  It had one strange feature tho -- it used
-# the cpu to bitblt pixels to scroll, it took longer than the refresh
-# rate, and looked like a rubber sheet stretching, then snapping
-# upwards.  It had everything the early mac had, except a floppy drive a
-# small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
-# Beranek and Neuman) sold at most a few hundred of them to the real
-# world.  DOD may have bought more...
-#
-
-# Entries for the BitGraph terminals.  The problem
-# with scrolling in vi can only be fixed by getting BBN to put
-# smarter scroll logic in the terminal or changing vi or padding
-# scrolls with about 500 ms delay.
-#
-# I always thought the problem was related to the terminal
-# counting newlines in its input buffer before scrolling and
-# then moving the screen that much. Then vi comes along and
-# paints lines in on the bottom line of the screen, so you get
-# this big white gap.
-
-bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video):\
-	:is=\E>\E[?5l\E[?7h:vb=\E[?5h\E[?5l:tc=bg2.0:
-bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video):\
-	:is=\E>\E[?5h\E[?7h:vb=\E[?5l\E[?5h:tc=bg2.0:
-bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init):\
-	:bs:xn:\
-	:co#85:li#64:\
-	:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=%i\E[%d;%dH:\
-	:cr=^M:cs=\E[%i%d;%dr:dl=\E[M:do=\E[B:k1=\EOP:k2=\EOQ:\
-	:k3=\EOR:k4=\EOS:kd=\E[B:ke=\E>:kl=\E[D:kr=\E[C:ks=\E=:\
-	:ku=\E[A:l1=PF1:l2=PF2:l3=PF3:l4=PF4:le=^H:me=\E[m:nd=\E[C:\
-	:rc=\E8:sc=\E7:se=\E[m:sf=\n:so=\E[7m:ta=^I:up=\E[A:
-
-bg1.25rv|bbn bitgraph 1.25 (reverse video):\
-	:is=\E>\E[?5h\E[?7h:vb=\E[?5l\E[?5h:tc=bg1.25:
-bg1.25nv|bbn bitgraph 1.25 (normal video):\
-	:is=\E>\E[?5l\E[?7h:vb=\E[?5h\E[?5l:tc=bg1.25:
-# (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
-bg1.25|bbn bitgraph 1.25:\
-	:co#85:li#64:\
-	:RA=\E[?7l:SA=\E[?7h:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[J:cm=%i\E[%d;%dH:cr=^M:dl=\E[M:do=\E[B:k1=\EP:\
-	:k2=\EQ:k3=\ER:k4=\ES:kd=\EB:ke=\E>:kl=\ED:kr=\EC:ks=\E=:\
-	:ku=\EA:l1=PF1:l2=PF2:l3=PF3:l4=PF4:le=^H:ll=\E[64;1H:\
-	:me=\E[m:nd=\E[C:se=\E[m:sf=\n:so=\E[7m:ta=^I:up=\E[A:
-
-#### Bull (bq, dku, vip)
-#
-# (Adapted for terminfo; AIX extension capabilities translated -- esr)
-
-#============================================#
-# BULL QUESTAR 210 `SDP' terminals emulation #
-#============================================#
-#
-# Description written by R.K.Saunders (Bull Transac)
-#
-# Modifications written by F. Girard (Bull MTS)
-#		19-05-87 V02.00.01
-#		17-12-87 V02.00.02
-#		15-09-89 V02.00.05
-#
-#	Typical technical selections F1 (modes SDP/ROLL):
-# -------------------------------------------------------
-# |   01   02   03   04   05   06   07   08   09   10   |
-# |  1010 0011 1010 0110 0110 0001 0100 0000 0000 0000  |
-# |                                                     |
-# |   11   12   13   14   15   16   17   18   19   20   |
-# |  0000 0110 100? 0000 0000 0000 0001 0000 0000 0001  |
-# |                                                     |
-# |   21   22   23   24   25   26   27   28   29   30   |
-# |  0011 0000 0001 1000 0000 0000 0000 0000 0000 0000  |
-# |                                                     |
-# |   31   32   33   34   35   36   37   38   39   40   |
-# |  1010 0011 0000 0000 0000 0000 0000 0000 0000 0000  |
-# -------------------------------------------------------
-#	Typical firmware identification F5 "etat 6":
-#  P287.02.04b	(AZERTY)
-#  P297.11.04	(24-pin: 2732)	or P798.11.04	(28-pin: 2764)
-#  P298.03.03	(monochrome)	or P374.03.02	(color)
-#
-#	SM SDP mode (VIP command):	^[[?=h
-#	RIS (erases screen):		^[c
-#	DMI disable keyboard:		^[`
-#	SM double rendition mode:	^[[?>h
-#	RM solicited status mode:	^[[5l
-#	RM character mode:		^[[>l
-#	RM echoplex mode:		^[[12l
-#	RM column tab mode:		^[[18l
-#	RM forbid SS2 keyboard mode:	^[[?<l
-#	SM scroll mode:			^[[=h
-#	FCF enable XON/XOFF:		^[P1s^[\
-#	MTL select end msg character:	^[[^Wp
-#	EMI enable keyboard:		^[b
-#	RIS retour etat initial:	^[c
-#	enable FC keypad:		^[[?<h,
-#	MPW map status line window:	^[PY99:98^[\
-#	SCP select status line:		^[[0;98v
-#	ED erase entire partition:	^[[2J
-#	SCP select main partition:	^[[v
-#	SM character insertion mode:	^[[4h
-#	RM character replacement mode:	^[[4l
-#	COO cursor on:			^[[r
-#	COO cursor off:			^[[1r
-#	SGR dim (turquoise) rev attr:	^[[2;7m
-#	SGR Data normal attr:		^[[m
-#	SO Line-graphic mode ON:	^N
-#	SI Line-graphic mode OFF:	^O
-#	MC start routing to printer:	^[[5i
-#	MC stop routing to printer:	^M^[[4i
-#
-
-# This entry covers the following terminals:
-# dku7102, tws2102, and tws models 2105 to 2112
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-tws-generic|dku7102|Bull Questar tws terminals:\
-	:am:es:hs:mi:ms:xn:xo:xs@:\
-	:co#80:it#8:li#24:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:\
-	:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%df:cr=^M:ct=\E[2g:\
-	:dc=\E[P:dl=\E[M:do=^J:\
-	:ds=\EPY99\:98\E\\\E[0;98v\E[2J\E[v:ei=\E[4l:fs=\E[v:\
-	:ho=\E[H:i1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\:\
-	:i2=\Eb\E[?<h:im=\E[4h:\
-	:is=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p:\
-	:k1=\E[1u\027:k2=\E[2u\027:k3=\E[3u\027:k4=\E[4u\027:\
-	:k5=\E[5u\027:k6=\E[6u\027:k7=\E[7u\027:k8=\E[8u\027:\
-	:kD=\E[P:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
-	:le=^H:ll=\E[H\E[A:mb=\E[0;5m:me=\E[m\017:mh=\E[0;2m:\
-	:mr=\E[0;7m:nd=\E[C:rs=\E[?=h\Ec:se=\E[m:sf=^J:so=\E[0;7m:\
-	:st=\EH:ta=\E[I:te=\E[0;98v\E[2J\E[v:\
-	:ti=\E[?>h\EPY99\:98\E\\:\
-	:ts=\EPY99\:98\E\\\E[0;98v\E[2;7m:ue=\E[m:up=\E[A:\
-	:us=\E[0;4m:ve=\E[r:vi=\E[1r:
-tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA:\
-	:ds=\E[0;98v\E[2J\E[v:fs=\E[v:i2=\Eb:ts=\E[0;98v:\
-	:tc=tws-generic:
-tws2103|xdku|BULL Questar tws2103:\
-	:ta=^I:tc=tws-generic:
-tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA:\
-	:ta=^I:tc=tws2102-sna:
-dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6):\
-	:AL@:DL@:al@:ce=\E[K\E[m:cl=\E[2J\E[H:cm@:dl@:\
-	:ds=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v:\
-	:ts=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m:tc=tws-generic:
-dku7202|BULL Questar 200 DKU7202 (color/character attributes):\
-	:i2=\E[?3h\Eb:mb=\E[0;2;4m:mh=\E[0;5m:so=\E[0;4;5;7m:\
-	:ta=^I:us=\E[0;2m:tc=tws-generic:
-
-#=========================================================#
-# BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
-#=========================================================#
-#
-# Description written by J. Staerck (BULL SA)
-#       Copyright (c) 1989 BULL SA
-#---------------------------------------------------------------------------
-#  This entry is used for terminals with vt320 emulation mode
-#  and following set-up :
-#    8 bit ISO Latin Character Set (ISO 8859-1),
-#    7 bit Control Characters,
-#    80 columns screen.
-#  Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
-#  They are used in string capabilities with vt220-320 emulation mode.
-#  In the following DEC definitions, two kinds of terminfo databases are
-#    provided :
-#    1. the first with Command Sequence Introducer starting with escape
-#       sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
-#    2. the second with Command Sequence Introducer starting with escape
-#       sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
-#	Soft Terminal Reset		esc [ ! p
-#	RIS (erases screen):		esc c
-#	DECKPNM numeric keypad mode:	esc >
-#	DECKPAM applic. keypad mode:	esc =
-#	DECSTBM Scrolling region:	esc [ r
-#	SCS select G0 = US:		esc ( B
-#	SCS select G1 = line-graphic:	esc ) 0
-#	Select 7-bit C1 controls:	esc sp F
-#	Select 8-bit C1 controls:	esc sp G
-#	Select cursor home:		esc [  H
-#	Select erase screen:		esc [  J
-#	SM KAM lock keyboard:		esc [ 2 h
-#	RM KAM unlock keyboard:		esc [ 2 l
-#	SM SRM local echo off:		esc [ 1 2 h
-#	RM SRM local echo on:		esc [ 1 2 l
-#	SM LNM New line :		esc [ 2 0 h
-#	RM LNM return = CR only:	esc [ 2 0 l
-#	SM DECCKM cursor keys mode:	esc [ ? 1 h
-#	RM DECCKM appli. keys mode:	esc [ ? 1 l
-#	SM DECANM ANSI mode on:		esc [ ? 2 h
-#	RM DECANM ANSI mode off:	esc [ ? 2 l
-#	SM DECCOLM 132-column screen:	esc [ ? 3 h
-#	RM DECCOLM 80-column screen:	esc [ ? 3 l
-#	SM DECSCLM Smooth scroll:	esc [ ? 4 h
-#	RM DECSCLM Jump scroll:		esc [ ? 4 l
-#	SM DECSCNM screen light backgr.	esc [ ? 5 h
-#	RM DECSCNM screen dark backgr.	esc [ ? 5 l
-#	SM DECOM move within margins:	esc [ ? 6 h
-#	RM DECOM move outside margins:	esc [ ? 6 l
-#	SM DECAWM auto right margin:	esc [ ? 7 h
-#	RM DECAWM auto right margin:	esc [ ? 7 l
-#	SM DECARM auto repeat:		esc [ ? 8 h
-#	RM DECARM auto repeat:		esc [ ? 8 l
-#	DECSASD Select active main:	esc [ 0 $ }
-#	DECSASD Select active status:	esc [ 1 $ }
-#	DECSSDT Select status none:	esc [ 0 $ ~
-#	DECSSDT Select status indic.:	esc [ 1 $ ~
-#	DECSSDT Select status host-wr:	esc [ 2 $ ~
-#	SM DECTCEM Visible cursor:	esc [ ? 2 5 h
-#	RM DECTCEM Invisible cursor:	esc [ ? 2 5 l
-#	SM DECNCRM 7 bits NCR set:	esc [ ? 4 2 h
-#	RM DECNCRM Multi or ISO latin:	esc [ ? 4 2 l
-#	SM DECNKM numeric keypad mode:	esc [ ? 6 6 h
-#	RM DECNKM numeric keypad appl.:	esc [ ? 6 6 l
-#	SM DECKBUM clavier informatique	esc [ ? 6 8 h
-#	RM DECKBUM clavier bureautique:	esc [ ? 6 8 l
-#	DECSCL vt300 mode 8-bit ctrl:	esc [ 6 3 " p
-# or	DECSCL vt300 mode 8-bit ctrl:	esc [ 6 3 ; 0 " p
-# or	DECSCL vt300 mode 8-bit ctrl:	esc [ 6 3 ; 2 " p
-#	DECSCL vt300 mode 7-bit ctrl:	esc [ 6 3 ; 1 " p
-#	Char. and Line attributes:	esc [ Ps ... Ps m
-# with:  0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
-# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
-#
-
-# This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-bq300|Bull vt320 ISO Latin 1 80 columns terminal:\
-	:am:eo:es:hs:km:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:vt#3:ws#80:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:\
-	:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
-	:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:\
-	:ds=\E[1$}\E[2$~\n\E[0$}:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:\
-	:ho=\E[H:i1=\E[63;1"p\E[2h:\
-	:i2=\E[0$}\E[?25h\E[2l\E[H\E[J:im=\E[4h:\
-	:is=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
-	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
-	:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
-	:kb=^H:kd=\E[B:ke=\E[?1l\E>:kl=\E[D:kr=\E[C:ku=\E[A:\
-	:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0m\E(B:mr=\E[7m:nd=\E[C:\
-	:nw=\EE:rc=\E8:sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:\
-	:st=\EH:ta=^I:te=\E[?7h:ti=\E[?7l\E[?1l\E(B:\
-	:ts=\E[1$}\E[2$~:ue=\E[24m:up=\E[A:us=\E[4m:\
-	:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:vs=\E[?25h:
-bq300-rv|Bull vt320 reverse 80 columns:\
-	:is=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
-	:vb=\E[?5l\E[?5h:tc=bq300:
-bq300-w|Bull vt320 132 columns:\
-	:co#132:ws#132:\
-	:is=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
-	:rs=\E[?3h:tc=bq300:
-bq300-w-rv|Bull vt320 reverse mode 132 columns:\
-	:co#132:ws#132:\
-	:is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
-	:rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300:
-
-#  This entry is used for terminals with vt320 emulation mode
-#  and following set-up :
-#    8 bit ISO Latin Character Set (ISO 8859-1),
-#    8 bit Control Characters, (CSI coded as x9B for ESC [)
-#    80 columns screen.
-#	Soft Terminal Reset		csi ! p
-#	RIS (erases screen):		esc c
-#	DECKPNM numeric keypad mode:	esc >
-#	DECKPAM applic. keypad mode:	esc =
-#	DECSTBM Scrolling region:	esc [ r
-#	SCS select G0 = US:		esc ( B
-#	SCS select G1 = line-graphic:	esc ) 0
-#	Select 7-bit C1 controls:	esc sp F
-#	Select 8-bit C1 controls:	esc sp G
-#	Select cursor home:		csi H
-#	Select erase screen:		csi J
-#	SM KAM lock keyboard:		csi 2 h
-#	RM KAM unlock keyboard:		csi 2 l
-#	SM SRM local echo off:		csi 1 2 h
-#	RM SRM local echo on:		csi 1 2 l
-#	SM LNM New line :		csi 2 0 h
-#	RM LNM return = CR only:	csi 2 0 l
-#	SM DECCKM cursor keys mode:	csi ? 1 h
-#	RM DECCKM appli. keys mode:	csi ? 1 l
-#	SM DECANM ANSI mode on:		csi ? 2 h
-#	RM DECANM ANSI mode off:	csi ? 2 l
-#	SM DECCOLM 132-column screen:	csi ? 3 h
-#	RM DECCOLM 80-column screen:	csi ? 3 l
-#	SM DECSCLM Smooth scroll:	csi ? 4 h
-#	RM DECSCLM Jump scroll:		csi ? 4 l
-#	SM DECSCNM screen light backgr.	csi ? 5 h
-#	RM DECSCNM screen dark backgr.	csi ? 5 l
-#	SM DECOM move within margins:	csi ? 6 h
-#	RM DECOM move outside margins:	csi ? 6 l
-#	SM DECAWM auto right margin:	csi ? 7 h
-#	RM DECAWM auto right margin:	csi ? 7 l
-#	SM DECARM auto repeat:		csi ? 8 h
-#	RM DECARM auto repeat:		csi ? 8 l
-#	DECSASD Select active main:	csi 0 $ }
-#	DECSASD Select active status:	csi 1 $ }
-#	DECSSDT Select status none:	csi 0 $ ~
-#	DECSSDT Select status indic.:	csi 1 $ ~
-#	DECSSDT Select status host-wr:	csi 2 $ ~
-#	SM DECTCEM Visible cursor:	csi ? 2 5 h
-#	RM DECTCEM Invisible cursor:	csi ? 2 5 l
-#	SM DECNCRM 7 bits NCR set:	csi ? 4 2 h
-#	RM DECNCRM Multi or ISO latin:	csi ? 4 2 l
-#	DECSCL vt300 mode 8-bit ctrl:	csi 6 3 " p
-# or	DECSCL vt300 mode 8-bit ctrl:	csi 6 3 ; 0 " p
-#	DECSCL vt300 mode 7-bit ctrl:	csi 6 3 ; 1 " p
-#	Char. and Line attributes:	csi Ps ... Ps m
-# with:  0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
-# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
-# (bq300-8: :le:,:nd:,:up:,:do:,:dl:,:al: to get under 1024 --esr)
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-bq300-8|Bull vt320 full 8 bits 80 columns:\
-	:am:eo:es:hs:km:mi:ms:xn:xo:\
-	:co#80:it#8:li#24:vt#3:ws#80:\
-	:AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\
-	:K1=\217w:K2=\217u:K3=\217y:K4=\217q:K5=\217s:LE=\233%dD:\
-	:RI=\233%dC:UP=\233%dA:ae=^O:as=^N:bl=^G:cd=\233J:ce=\233K:\
-	:cl=\233H\233J:cm=\233%i%d;%dH:cr=^M:cs=\233%i%d;%dr:\
-	:ct=\2333g:dc=\233P:ds=\2331$}\2332$~\n\2330$}:\
-	:ec=\233%dX:ei=\2334l:fs=\2330$}:ho=\233H:\
-	:i1=\E[63;2"p\E[2h:i2=\2330$}\233?25h\2332l\233H\233J:\
-	:im=\2334h:\
-	:is=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
-	:k1=\217P:k2=\217Q:k3=\217R:k4=\217S:k6=\23317~:\
-	:k7=\23318~:k8=\23319~:k9=\23320~:kD=\2333~:kI=\2332~:\
-	:kN=\2336~:kP=\2335~:kb=^H:kd=\233B:ke=\233?1l\E>:\
-	:kl=\233D:kr=\233C:ku=\233A:mb=\2335m:md=\2331m:\
-	:me=\2330m\E(B:mr=\2337m:nw=\EE:rc=\E8:sc=\E7:se=\23327m:\
-	:sf=\ED:so=\2337m:sr=\EM:st=\EH:ta=^I:te=\233?7h:\
-	:ti=\233?7l\233?1l\E(B:ts=\2331$}\2332$~:ue=\23324m:\
-	:us=\2334m:vb=\233?5h\233?5l:ve=\233?25h:vi=\233?25l:\
-	:vs=\233?25h:
-bq300-8rv|Bull vt320 8-bit reverse mode 80 columns:\
-	:is=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
-	:vb=\233?5l\233?5h:tc=bq300-8:
-bq300-8w|Bull vt320 8-bit 132 columns:\
-	:co#132:ws#132:\
-	:is=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
-	:rs=\233?3h:tc=bq300-8:
-bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns:\
-	:co#132:ws#132:\
-	:is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
-	:rs=\233?3h:vb=\233?5l\233?5h:tc=bq300-8:
-
-#  This entry is used for terminals with vt320 emulation mode
-#  a 102 keys keyboard (PC scancode !) and following set-up :
-#    8 bit ISO Latin Character Set (ISO 8859-1),
-#    7 bit Control Characters,
-#    80 columns screen.
-bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns:\
-	:%0@:%1@:*6@:@0@:@7=\E[4~:F1=\E[29~:F2=\E[31~:F3@:F4@:F5@:F6@:\
-	:F7@:F8@:F9@:FA@:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:\
-	:k5=\E[21~:k6=\E[23~:k7=\E[24~:k8=\E[25~:k9=\E[26~:\
-	:k;=\E[28~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:\
-	:kh=\E[1~:l1@:l2@:l3@:l4@:tc=bq300:
-bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns:\
-	:is=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
-	:vb=\E[?5l\E[?5h:tc=bq300-pc:
-bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal:\
-	:co#132:ws#132:\
-	:is=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
-	:rs=\E[?3h:tc=bq300-pc:
-bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns:\
-	:co#132:ws#132:\
-	:is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
-	:rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300-pc:
-#    8 bit ISO Latin Character Set (ISO 8859-1),
-#    8 bit Control Characters,
-#    80 columns screen.
-bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns:\
-	:%0@:%1@:*6@:@0@:@7=\2334~:F1=\23329~:F2=\23331~:F3@:F4@:F5@:\
-	:F6@:F7@:F8@:F9@:FA@:k1=\23317~:k2=\23318~:k3=\23319~:\
-	:k4=\23320~:k5=\23321~:k6=\23323~:k7=\23324~:k8=\23325~:\
-	:k9=\23326~:k;=\23328~:kD=\2333~:kI=\2332~:kN=\2336~:\
-	:kP=\2335~:kb=^H:kh=\2331~:l1@:l2@:l3@:l4@:tc=bq300-8:
-bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns:\
-	:is=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
-	:vb=\E[?5l\E[?5h:tc=bq300-8-pc:
-bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns:\
-	:co#132:ws#132:\
-	:is=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
-	:rs=\E[?3h:tc=bq300-8-pc:
-bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns:\
-	:co#132:ws#132:\
-	:is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
-	:rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300-8-pc:
-
-#======================================================#
-# BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
-#======================================================#
-
-# normal mode, 8 bits, 80 columns terminal.
-#	RES reset :			^[e
-#	RIS reset initial state:	^[c
-#	BLE bell enable			^[h
-#	BLD bell disable		^[g
-#	CAMS char. attr. mode set	^[[D
-#	CAMR char. attr. mode reset	^[[G
-#	CLR clear			^[`
-#	KBU keyboard unlock (set)	^[[W
-#	KBL keyboard lock (reset)	^[[X
-#	CM  character mode (async.) 	^[k
-#	NEP non echoplex mode (by host)	^[l
-#	EP  echoplex mode (by host) 	^[m
-#	IM  insert mode set		^[[I
-#	IM  insert mode reset 		^[[J
-#	RMS roll mode set 		^[r
-#	RMR roll mode reset 		^[q
-#	SM78 set mode vip7800	 	^[[1q
-#	SD  scroll up  	(72 lines) 	^[[0s
-#	SD  scroll down	(72 lines) 	^[[1s
-#	RBM block mode reset		^[[E
-#	SLS status line set 		^[w
-#	SLR status line reset 		^[v
-#	SLL status line lock 		^[O
-#	LGS Line-graphic mode set 	^[G
-#	LGR Line-graphic mode reset 	^[F
-#	TBC tab clear (at cursor pos.)	^[[g
-#	TBI tab initialize 		^[[N
-#	TBS tab set (at cursor pos.)	^[p
-#	PDS  print data space		^[[0p
-#	PHD  print host data 		^[[3p
-#	PDT  print data terminator	^[[<p
-#	PRES print adapter reset	^[[2p
-#	SSPR multi-part. reset		^[[<>u
-#	SSP0 partition 0 set		^[[00u
-#	SSP1 partition n format 1 	^[[PnPnSTRINGu
-#	SSP2 partition n format 2 	^[[PnPnSTRINGu
-#	SSP3 partition n format 3 	^[[PnPnu
-#	ATR attribute (visual)
-#	    blink :			^[sB
-#	    dim :			^[sL
-#	    hide (blank) :		^[sH
-#	    restore :			^[sR
-#	    inverse video :		^[sI
-#	    prot. :			^[sP
-#	    underline :			^[s_
-#	    reset :			^{
-#
-# This covers the vip7800 and BQ3155-vip7800
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-vip|Bull Questar 3155-7800:\
-	:5i:am:es:hs:km:ms:xn:xo:\
-	:co#80:it#8:li#24:vt#3:ws#80:\
-	:#2=\EH:#4=\Eo:%i=\Eu:F1=\E\\:F2=\E^:F3@:F4@:F5@:F6@:F7@:F8@:\
-	:F9@:FA@:FB=\E1:FC=\E5:FD=\E7:FE=\E9:FF=\E;:FG=\E=:FH=\E?:\
-	:FI=\EQ:FJ=\ES:FK=\EV:FL=\E]:FM=\E_:ae=\EF:as=\EG:bl=^G:\
-	:bt=\E[Z:cd=\EJ:ce=\EK:cl=\E`:cm=\E[%i%03%03f:cr=^M:\
-	:ct=\E[N:dc=\E[P:dl=\E[M:do=^J:ds=\Ev:ei=\E[J:fs=\EO:ho=\EH:\
-	:i2=\Er\E[W\E`:ic=\E[I:im=\E[I:\
-	:is=\E[00u\E[<>001001024080024080u\E[01u:k1=\E0:k2=\E2:\
-	:k3=\E6:k4=\E8:k5=\E\::k6=\E<:k7=\E>:k8=\EP:k9=\ER:k;=\ET:\
-	:kA=\E[L:kB=\E[Z:kC=\E`:kD=\E[P:kE=\EK:kF=\E[0s:kH=\EH\EA:\
-	:kI=\E[I:kL=\E[M:kM=\E[J:kR=\E[1s:kS=\EJ:kT=\Ep:ka=\E[N:\
-	:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:kt=\E[g:ku=\EA:l1=pf1:\
-	:l2=pf2:l3=pf3:l4=pf4:le=^H:ll=\EH\EA:mb=\EsB:\
-	:me=\EsR\EsU\EF:mh=\EsL:mk=\EsH:mp=\EsP:mr=\EsI:nd=\EC:\
-	:nw=^M:pf=\E[<p:po=\E[3p:ps=\E[0p:r1=\Ec:r2=\E[G:s0=\EF:\
-	:s1=\EG:se=\EsR:sf=^J:so=\EsI:sr=\EA\EJ\EH\E[L:st=\Ep:\
-	:ta=^I:ts=\Ew:ue=\EsR:up=\EA:us=\Es_:vb=\007\007\007:
-# normal screen, 8 bits, 132 columns terminal.
-vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide:\
-	:co#132:ws#132:\
-	:is=\E[00u\E[<>001001024132024132u\E[01u:tc=vip:
-vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines:\
-	:li#72:\
-	:is=\E[00u\E[<>001001024080072080u\E[01u:tc=vip:
-vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines:\
-	:co#132:li#72:ws#132:\
-	:is=\E[00u\E[<>001001024132072132u\E[01u:tc=vip:
-
-#### Chromatics
-#
-
-# I have put the long strings in :ti:/:te:. Ti sets up a window
-# that is smaller than the screen, and puts up a warning message
-# outside the window. Te erases the warning message, puts the
-# window back to be the whole screen, and puts the cursor at just
-# below the small window. I defined :ve: and :vi: to really turn
-# the cursor on and off, but I have taken this out since I don't
-# like the cursor being turned off when vi exits.
-cg7900|chromatics|chromatics 7900:\
-	:am:\
-	:co#80:li#40:\
-	:al=^A>2:bl=^G:cd=^Al:ce=^A`:cl=^L:cm=\001M%r%d,%d,:cr=^M:\
-	:dc=^A<1:dl=^A<2:do=^J:ei=:ho=^\:ic=^A>1:im=:le=^H:ll=^A|:\
-	:nd=^]:se=\001C1,\001c2,:sf=^J:so=\001C4,\001c7,:\
-	:te=\001W0,40,85,48,\014\001W0,0,85,48,\001M0,40,:\
-	:ti=\001P0\001O1\001R1\001C4,\001c0,\014\001M0,42,WARNING DOUBLE ENTER ESCAPE and \025\001C1,\001c2,\001W0,0,79,39,:\
-	:uc=\001\001_\001\0:up=^K:
-
-#### Computer Automation
-#
-
-ca22851|computer automation 22851:\
-	:am:\
-	:co#80:li#24:\
-	:bl=^G:cd=^\:ce=^]:cl=\014:cm=\002%i%.%.:cr=^M:do=^J:ho=^^:\
-	:kd=^W:kh=^^:kl=^U:ku=^V:le=^U:nd=^I:sf=^J:up=^V:
-
-#### Cybernex
-#
-
-# This entry has correct padding and the undocumented "ri" capability
-cyb83|xl83|cybernex xl-83:\
-	:am:bs:\
-	:co#80:li#24:\
-	:bl=^G:cd=\020:ce=\017:cl=\014:cm=\027%+ %+ :cr=^M:do=^J:\
-	:ho=^K:kd=^J:kl=^H:kr=^I:ku=^N:le=^H:nd=^I:sf=^J:sr=^N:up=^N:
-# (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
-cyb110|mdl110|cybernex mdl-110:\
-	:am:bs:\
-	:co#80:li#24:\
-	:al=\016A\016\035:bl=^G:cd=\016@\026:ce=\016@\026:\
-	:cl=\030:cm=\020%+ %+ :cr=^M:dc=\016A\036:\
-	:dl=\016A\016\036:do=^J:ei=:ho=^Y:ic=\016A\035:im=:le=^H:\
-	:nd=^U:se=^NG:sf=^J:so=^NF:ta=\011:up=^Z:
-
-#### Datapoint
-#
-# Datapoint is gone.  They used to be headquartered in Texas.
-# They created ARCnet, an Ethernet competitor that flourished for a while
-# in the early 1980s before 3COM got wise and cut its prices.  The service
-# side of Datapoint still lives (1995) in the form of Intelogic Trace.
-#
-
-dp3360|datapoint|datapoint 3360:\
-	:am:bs:\
-	:co#82:li#25:\
-	:bl=^G:cd=^_:ce=^^:cl=^]^_:cr=^M:do=^J:ho=^]:le=^H:nd=^X:\
-	:sf=^J:up=^Z:
-
-# From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
-# The Datapoint 8242 Workstation was sold at least between 1985
-# and 1989. To make the terminal work with this entry, press
-# CONTROL-INT-INT to take the terminal off-line, and type (opt).
-# Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
-# CR/LF off. Use control-shift-[] as escape key, control-I as tab,
-# shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
-# fact unusable because the strings sent by the terminal conflict
-# with other keys).
-# The terminal is capable of displaying "box draw" characters.
-# For each graphic character you must send 2 ESC's (\E\E) followed
-# by a control character as follows:
-#         character        meaning
-#         =========        =======
-#         ctrl-E           top tee
-#         ctrl-F           right tee
-#         ctrl-G           bottom tee
-#         ctrl-H           left tee
-#         ctrl-I           cross
-#         ctrl-J           top left corner
-#         ctrl-K           top right corner
-#         ctrl-L           bottom left corner
-#         ctrl-M           bottom right corner
-#         ctrl-N           horizontal line
-#         ctrl-O           vertical line
-# Unfortunately this cannot be fitted into the termcap/terminfo
-# description scheme.
-dp8242|datapoint 8242:\
-	:ms:\
-	:co#80:li#25:\
-	:al=\E^T:bl=^G:cd=^W:ce=^V:cl=\025\E\004\027\030:\
-	:cm=\011%r%+\\%+\\:cr=^M:dl=\E^Z:do=^J:ho=^U:\
-	:i1=\E\014\E\016\0\230\0\317\025\027\030\E\004:\
-	:k1=^G\Ee:k2=^I\Ed:k3=^J\Ec:k4=^J\Eb:k5=^S\Ea:k6=\EO\Ee:\
-	:k7=\EN\Ed:k8=\EM\Ec:k9=\EL\Eb:k;=\EK\Ea:kb=^H:kd=^B:kl=^D:\
-	:kr=^F:ku=^E:le=^H:nw=^M^J:\
-	:r1=\E\014\E\016\0\230\0\317\025\027\030\E\004:\
-	:rp=\E\023%.%.:se=\E^D:sf=^C:so=\E^E:sr=^K:ta=^I:ue=\E^D:\
-	:us=\E^F:ve=^X:vi=^Y:\
-	:..wi=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025:
-
-#### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
-#
-# These entries are DEC's official terminfos for its older terminals.
-# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
-# Engineering for more information.  Updated terminfos and termcaps
-# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
-#
-
-gt40|dec gt40:\
-	:bs:os:\
-	:co#72:li#30:\
-	:bl=^G:cr=^M:do=^J:le=^H:
-gt42|dec gt42:\
-	:bs:os:\
-	:co#72:li#40:\
-	:bl=^G:cr=^M:do=^J:le=^H:
-vt50|dec vt50:\
-	:bs:\
-	:co#80:li#12:\
-	:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cr=^M:do=^J:le=^H:nd=\EC:\
-	:sf=^J:ta=^I:up=\EA:
-vt50h|dec vt50h:\
-	:bs:\
-	:co#80:li#12:\
-	:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:do=^J:\
-	:le=^H:nd=\EC:sf=^J:sr=\EI:ta=^I:up=\EA:
-# (vt61: there's a BSD termcap that claims :dl=\EPd:, :al=\EPf.: :kb=^H:)
-vt61|vt-61|vt61.5|dec vt61:\
-	:co#80:li#24:\
-	:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=\r:do=^J:\
-	:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:sf=\n:sr=\EI:ta=^I:\
-	:up=\EA:
-
-# The gigi does standout with red!
-# (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
-gigi|vk100|dec gigi graphics terminal:\
-	:am:bs:xn:\
-	:co#84:li#24:\
-	:DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
-	:UP=\E[%dA:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
-	:cm=\E[%i%d;%dH:cr=^M:do=^J:\
-	:is=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h:k1=\EOP:\
-	:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\EOB:ke=\E[?1l\E>:kh=\E[H:\
-	:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:me=\E[m:\
-	:nd=\E[C:se=\E[m:sf=^J:so=\E[7;31m:sr=\EM:ta=^I:ue=\E[m:\
-	:up=\E[A:us=\E[4m:
-
-# DEC PRO-350 console (VT220-style).  The 350 was DEC's attempt to produce
-# a PC differentiated from the IBM clones.  It was a total, ludicrous,
-# grossly-overpriced failure (among other things, DEC's OS didn't include
-# a format program, so you had to buy pre-formatted floppies from DEC at
-# a hefty premium!).
-pro350|decpro|dec pro console:\
-	:bs:\
-	:co#80:it#8:li#24:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=\EG:as=\EF:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :do=\EB:\
-	:ho=\EH:k0=\EE:k1=\EF:k2=\EG:k3=\EH:k4=\EI:k5=\EJ:k6=\Ei:\
-	:k7=\Ej:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:\
-	:se=\E^N:so=\E^H:sr=\EI:ta=^I:ue=\E^C:up=\EA:us=\E^D:
-
-dw1|decwriter I:\
-	:bs:hc:os:\
-	:co#72:\
-	:bl=^G:cr=^M:do=^J:le=^H:sf=^J:
-dw2|decwriter|dw|decwriter II:\
-	:bs:hc:os:\
-	:co#132:\
-	:bl=^G:cr=^M:do=^J:kb=^H:le=^H:sf=^J:
-# \E(B		Use U.S. character set (otherwise # => british pound !)
-# \E[20l	Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
-# \E[w   	10 char/in pitch
-# \E[1;132	full width horizontal margins
-# \E[2g		clear all tab stops
-# \E[z		6 lines/in
-# \E[66t	66 lines/page (for \f)
-# \E[1;66r	full vertical page can be printed
-# \E[4g		clear vertical tab stops
-# \E>		disable alternate keypad mode (so it transmits numbers!)
-# \E[%i%p1%du	set tab stop at column %d (origin == 1)
-#		(Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
-#		a tab stop)
-#
-#       The dw3 does standout with wide characters.
-#
-dw3|la120|decwriter III:\
-	:bs:hc:os:\
-	:co#132:\
-	:bl=^G:cr=^M:do=^J:\
-	:i1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>:\
-	:is=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r:\
-	:kb=^H:le=^H:me=\E[w:se=\E[w:sf=^J:so=\E[6w:ta=^I:
-dw4|decwriter IV:\
-	:am:bs:hc:os:\
-	:co#132:\
-	:bl=^G:cr=^M:do=^J:is=\Ec:k0=\EOP:k1=\EOQ:k2=\EOR:k3=\EOS:\
-	:kb=^H:le=^H:sf=^J:ta=^I:
-
-# These aren't official
-ln03|dec ln03 laser printer:\
-	:hc:\
-	:co#80:li#66:\
-	:bl=^G:cr=^M:do=^J:hd=\EK:hu=\EL:me=\E[m:nw=^M^J:se=\E[22m:\
-	:sf=^J:so=\E[1m:ta=^I:ue=\E[24m:us=\E[4m:
-ln03-w|dec ln03 laser printer 132 cols:\
-	:co#132:\
-	:bl=^G:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:\
-	:tc=ln03:
-
-#### Delta Data (dd)
-#
-
-# Untested. The cup sequence is hairy enough that it probably needs work.
-# The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
-# There are BSD-derived termcap entries floating around for this puppy
-# that are *certainly* wrong.
-delta|dd5000|delta data 5000:\
-	:am:bs:\
-	:co#80:li#27:\
-	:bl=^G:ce=^NU:cl=^NR:cm=\017%+^P%+^P:dc=^NV:do=^J:ho=^NQ:\
-	:le=^H:nd=^Y:sf=^J:up=^Z:
-
-#### Digital Data Research (ddr)
-#
-
-# (ddr: I added <rmam>/<smam> based on the init string -- esr)
-ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator:\
-	:am:bs:xn:\
-	:co#80:it#8:li#24:vt#3:\
-	:RA=\E[7l:SA=\E[7l:cd=50\E[J:ce=3\E[K:cl=50\E[H\E[2J:\
-	:cm=5\E[%i%d;%dH:cs=\E[%i%d;%dr:do=^J:ho=\E[H:\
-	:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
-	:kb=^H:kd=\E[B:ke=\E[?1l\E>:kl=\E[D:kr=\E[C:ks=\E[?1h\E=:\
-	:ku=\E[A:le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:\
-	:nd=2\E[C:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\
-	:rf=/usr/share/tabset/vt100:sc=\E7:se=\E[m:sf=5\ED:\
-	:so=\E[7m:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:us=2\E[4m:
-
-#### Evans & Sutherland
-#
-
-# Jon Leech <leech@cs.unc.edu> tells us:
-# The ps300 was the Evans & Sutherland Picture System 300, a high
-# performance 3D vector graphics system with a bunch of specialized hardware.
-# Approximate date of release was 1982 (early 80s, anyway), and it had several
-# evolutions including (limited) color versions such as the PS330C. PS300s
-# were effectively obsolete by the late 80s, replaced by raster graphics
-# systems, although specialized applications like molecular modeling
-# hung onto them for a while longer.  AFAIK all E&S vector graphics systems
-# are out of production, though of course E&S is very much alive (in 1996).
-# (ps300: changed ":pt@:" to "it@" -- esr)
-#
-ps300|Picture System 300:\
-	:xt:\
-	:it@:\
-	:se@:so@:ue@:us@:tc=vt100:
-
-#### General Electric (ge)
-#
-
-terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200:\
-	:bs:hc:os:\
-	:co#120:\
-	:bl=^G:cr=^M:do=^J:sf=^J:
-
-#### Heathkit/Zenith
-#
-
-# Here is a description of the H19 DIP switches:
-#
-# S401
-# 0-3 = baud rate as follows:
-#
-#         3       2       1       0
-#	---	---	---	---
-#         0       0       1       1       300 baud
-#         0       1       0       1       1200 baud
-#         1       0       0       0       2400 baud
-#         1       0       1       0       4800 baud
-#         1       1       0       0       9600 baud
-#         1       1       0       1       19.2K baud
-#
-# 4 = parity (0 = no parity)
-# 5 = even parity (0 = odd parity)
-# 6 = stick parity (0 = normal parity)
-# 7 = full duplex (0 = half duplex)
-#
-# S402
-# 0 = block cursor (0 = underscore cursor)
-# 1 = no key click (0 = keyclick)
-# 2 = wrap at end of line (0 = no wrap)
-# 3 = auto LF on CR (0 = no LF on CR)
-# 4 = auto CR on LF (0 = no CR on LF)
-# 5 = ANSI mode (0 = VT52 mode)
-# 6 = keypad shifted (0 = keypad unshifted)
-# 7 = 50Hz refresh (1 = 60Hz refresh)
-#
-# Factory Default settings are as follows:
-#          7 6 5 4 3 2 1 0
-# S401     1 0 0 0 1 1 0 0
-# S402     0 0 0 0 0 0 0 0
-# (h19: I added <rmam>/<smam> based on the init string;
-# also added empty <acsc> to suppress a tic warning -- esr)
-h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode:\
-	:am:bs:mi:ms:\
-	:co#80:it#8:li#24:\
-	:RA=\E[?7l:SA=\E[?7h:ac=:ae=\E[11m:al=\E[1L:as=\E[10m:\
-	:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:cr=^M:\
-	:dc=\E[1P:dl=\E[1M:do=\E[1B:ei=\E[4l:ho=\E[H:im=\E[4h:\
-	:is=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h:k1=\EOS:\
-	:k2=\EOT:k3=\EOU:k4=\EOV:k5=\EOW:k6=\EOP:k7=\EOQ:k8=\EOR:\
-	:kb=^H:kd=\E[1B:kh=\E[H:kl=\E[1D:kr=\E[1C:ku=\E[1A:l6=blue:\
-	:l7=red:l8=white:le=^H:nd=\E[1C:se=\E[m:sf=^J:so=\E[7m:\
-	:sr=\EM:ta=^I:up=\E[1A:ve=\E[>4l:vs=\E[>4h:
-h19-bs|heathkit w/keypad shifted:\
-	:ke=\Eu:ks=\Et:tc=h19-b:
-h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor:\
-	:ke=\Eu:ks=\Et:tc=h19-u:
-# (h19: merged in :ip: from BSDI hp19-e entry>;
-# also added empty <acsc> to suppress a tic warning --esr)
-# From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
-# Tim tells us that:
-# I have an old Zenith-19 terminal at home that still gets a lot of use.
-# This terminal suffers from the same famous insert-mode padding lossage
-# that has been acknowledged for the Z29 terminal.  Emacs is nearly
-# unusable on this box, since even a half-scroll up or down the window
-# causes flaming terminal death.
-#
-# On the Z19, the only way I have found around this problem is to remove
-# the :al: and :dl: entries entirely.  No amount of extra padding will
-# help (I have tried up to 20000).  Removing :al=\EL$: and :dl=\EM$:
-# makes Emacs a little slower, but it remains in the land of the living.
-# Big win.
-h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19:\
-	:am:bs:es:hs:mi:ms:\
-	:co#80:it#8:li#24:\
-	:ac=:ae=\EG:as=\EF:bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :\
-	:cr=^M:dc=\EN:do=\EB:ei=\EO:fs=\Ek\Ey5:ho=\EH:im=\E@:\
-	:ip=1.5<1.5/>:k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:\
-	:k7=\EQ:k8=\ER:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:\
-	:l6=blue:l7=red:l8=white:le=^H:nd=\EC:se=\Eq:sf=^J:so=\Ep:\
-	:sr=\EI:ta=^I:ts=\Ej\Ex5\EY8%+ \Eo\Eo:up=\EA:ve=\Ey4:\
-	:vs=\Ex4:
-h19-u|heathkit with underscore cursor:\
-	:ve@:vs@:tc=h19-b:
-h19-g|h19g|heathkit w/block cursor:\
-	:ve=\Ex4:tc=h19-b:
-alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19:\
-	:li#60:\
-	:al=\EL:dl=\EM:tc=h19:
-
-# The major problem with the Z29 is that it requires more padding than the Z19.
-#
-# The problem with declaring an H19 to be synonymous with a Z29 is that
-# it needs more padding. It especially loses if a program attempts
-# to put the Z29 into insert mode and insert text at 9600 baud. It
-# even loses worse if the program attempts to insert tabs at 9600
-# baud. Adding padding to text that is inserted loses because in
-# order to make the Z29 not die, one must add so much padding that
-# whenever the program tries to use insert mode, the effective
-# rate is about 110 baud.
-#
-# What program would want to put the terminal into insert mode
-# and shove stuff at it at 9600 baud you ask?
-#
-# Emacs. Emacs seems to want to do the mathematically optimal
-# thing in doing a redisplay rather than the practical thing.
-# When it is about to output a line on top of a line that is
-# already on the screen, instead of just killing to the end of
-# the line and outputting the new line, it compares the old line
-# and the new line and if there are any similarities, it
-# constructs the new line by deleting the text on the old line
-# on the terminal that is already there and then inserting new
-# text into the line to transform it into the new line that is
-# to be displayed. The Z29 does not react kindly to this.
-#
-# But don't cry for too long.... There is a solution. You can make
-# a termcap entry for the Z29 that says the Z29 has no insert mode.
-# Then Emacs cannot use it. "Oh, no, but now inserting into a
-# line will be really slow", you say. Well there is a sort of a
-# solution to that too. There is an insert character option on
-# the Z29 that will insert one character. Unfortunately, it
-# involves putting the terminal into ansi mode, inserting the
-# character, and changing it back to H19 mode. All this takes 12
-# characters. Pretty expensive to insert one character, but it
-# works. Either Emacs doesn't try to use its inserting hack when
-# it's only given an insert character ability or the Z29 doesn't
-# require padding with this (the former is probably more likely,
-# but I haven't checked it out).
-# (z29: added empty <acsc> to suppress a tic warning, merged in
-# status line capabilities from BRL entry --esr)
-z29|zenith29|z29b|zenith z29b:\
-	:am:bs:es:hs:mi:ms:pt:\
-	:co#80:kn#10:li#24:\
-	:ac=:ae=\EF:al=1\EL:as=\EG:bc=\ED:bl=^G:bt=\E-:cd=\EJ:ce=\EK:\
-	:cl=\EE:cm=\EY%+ %+ :cr=^M:dc=\EN:dl=1\EM:do=\EB:ds=\Ey1:\
-	:ei=\EO:fs=\Ek\Ey5:ho=\EH:ic=\E<\E[1@\E[?2h:im=\E@:\
-	:is=\E<\E[?2h\Ev:k0=\E~:k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:\
-	:k6=\EP:k7=\EQ:k8=\ER:k9=\E0I:kb=^H:kd=\EB:kh=\EH:kl=\ED:\
-	:kr=\EC:ku=\EA:l0=home:le=^H:nd=\EC:se=\Eq:sf=\n:so=\Ep:\
-	:sr=2\EI:ta=^I:..ts=\Ej\Ex5\Ex1\EY8%+ \Eo:ue=\Es0:up=\EA:\
-	:us=\Es8:ve=\Ey4:vs=\Ex4:
-# z29 in ansi mode. Assumes that the cursor is in the correct state, and that
-# the world is stable. <rs1> causes the terminal to be reset to the state
-# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
-# cursor, bc -> block cursor.
-# From: Mike Meyers
-# (z29a: replaced nonexistent :if=/usr/share/tabset/zenith29: befause :st:
-# looks vt100-compatible -- esr)
-z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode:\
-	:am:bs:es:hs:mi:ms:pt:\
-	:co#80:it#8:kn#10:li#24:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:bc=\ED:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J:\
-	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[1P:\
-	:do=^J:ds=\E[>1l:fs=\E[u\E[>5l:ho=\E[H:\
-	:if=/usr/share/tabset/vt100:k0=\E[~:k1=\EOS:k2=\EOT:\
-	:k3=\EOU:k4=\EOV:k5=\EOW:k6=\EOP:k7=\EOQ:k8=\EOR:k9=\EOX:\
-	:kC=\E[J:kS=\E[J:kb=^H:kd=\EOB:kh=\E[H:kl=\EOD:kr=\EOC:\
-	:ku=\EOA:l0=help:le=^H:mb=\E[5m:md=\E[2m:me=\E[m:mh=\E[2m:\
-	:mr=\E[7m:nd=\E[C:nw=^M\ED:ps=\E#7:\
-	:r1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m:\
-	:rc=\E[r:sc=\E[s:se=\E[m:sf=\ED:so=\E[7;2m:sr=\EM:st=\EH:\
-	:ta=^I:te=\E[?7h:ti=\E[?7l:\
-	:ts=\E[s\E[>5;1h\E[25;%i%dH\E[1K:ue=\E[m:up=\E[A:\
-	:us=\E[4m:
-z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor:\
-	:r1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m:\
-	:tc=z29a:
-z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick:\
-	:r1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m:\
-	:tc=z29a:
-z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick:\
-	:r1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m:\
-	:tc=z29a:
-# From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
-z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode:\
-	:5i:am:es:hs:mi:ms:xo:\
-	:co#80:li#24:\
-	:%1=\E[~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:K1=\EOw:\
-	:K2=\EOy:K3=\EOu:K4=\EOq:K5=\EOs:LE=\E[%dD:RI=\E[%dC:\
-	:UP=\E[%dA:ac=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~:\
-	:ae=\E(B:al=\E[1L:as=\E(0:bl=^G:bt=\E[1Z:cb=\E[1K:cd=\E[0J:\
-	:ce=\E[0K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[1P:dl=\E[1M:do=\E[B:\
-	:ds=\E[>1l:ei=\E[4l:fs=\E[u:ho=\E[H:im=\E[4h:\
-	:is=\E<\E[>1;3;5;6;7l\E[0m\E[2J:k1=\EOS:k2=\EOT:k3=\EOU:\
-	:k4=\EOV:k5=\EOW:k6=\EOP:k7=\EOQ:k8=\EOR:k9=\EOX:kS=\E[J:\
-	:kb=^H:kd=\E[B:ke=\E[>7l:kh=\E[H:kl=\E[D:kr=\E[C:ks=\E[>7h:\
-	:ku=\E[A:le=^H:ll=\E[24;1H:mb=\E[5m:md=\E[1m:me=\E[0m:\
-	:mh=\E[2m:mr=\E[7m:nd=\E[C:pf=\E[4i:po=\E[5i:\
-	:ps=\E[?19h\E[i:rc=\E[u:rs=\E<\Ec\0:sc=\E[s:se=\E[0m:\
-	:sf=^J:so=\E[7m:st=\EH:ta=^I:ts=\E[s\E[>1h\E[25;%i%dH:\
-	:ue=\E[0m:up=\E[A:us=\E[4m:ve=\E[>5l:vi=\E[>5h:
-
-# From: Brad Brahms <Brahms@USC-ECLC>
-z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor:\
-	:ve=\Ey4\Em70:vs=\Ex4\Em71:tc=z100bw:
-# (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
-z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc:\
-	:bs:mi:ms:pt:\
-	:co#80:it#8:kn#10:li#24:\
-	:ac=:ae=\EG:al=5*\EL:as=\EF:cd=\EJ:ce=\EK:cl=5*\EE:\
-	:cm=1*\EY%+ %+ :dc=1*\EN:dl=5*\EM:do=\EB:ei=\EO:ho=\EH:\
-	:im=\E@:k0=\EJ:k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:\
-	:k7=\EQ:k8=\ER:k9=\EOI:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:\
-	:ku=\EA:le=^H:nd=\EC:se=\Eq:so=\Ep:sr=\EI:ta=^I:up=\EA:\
-	:ve=\Ey4:vs=\Ex4:
-p19|h19-b with il1/dl1:\
-	:al=2*\EL:dl=2*\EM:tc=h19-b:
-# From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
-# (ztx: removed duplicate :sr: -- esr)
-ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11:\
-	:am:bs:es:hs:\
-	:co#80:it#8:li#24:\
-	:al=\EL:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :dl=\EM:do=^J:\
-	:ds=\Ey1:fs=\Ek\Ey5:ho=\EH:\
-	:is=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>:k0=\ES:\
-	:k1=\EB:k2=\EU:k3=\EV:k4=\EW:k5=\EP:k6=\EQ:k7=\ER:kb=^H:\
-	:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:se=\Eq:so=\Es5:\
-	:sr=\EI:ta=^I:..ts=\Ej\Ex5\Ex1\EY8%+ \Eo:ue=\Eq:up=\EA:\
-	:us=\Es2:
-
-#### IMS International (ims)
-#
-# There was a company called IMS International located in Carson City,
-# Nevada, that flourished from the mid-70s to mid-80s.  They made S-100
-# bus/Z80 hardware and a line of terminals called Ultimas.
-#
-
-# From: Erik Fair <fair@ucbarpa.berkeley.edu>  Sun Oct 27 07:21:05 1985
-ims950-b|bare ims950 no init string:\
-	:is@:tc=ims950:
-# (ims950: removed obsolete ":ko@:" -- esr)
-ims950|ims televideo 950 emulation:\
-	:xn@:\
-	:k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:kb@:kd@:kh@:kl@:kr@:ku@:vb@:\
-	:tc=tvi950:
-# (ims950-rv: removed obsolete ":ko@:" -- esr)
-ims950-rv|ims tvi950 rev video:\
-	:xn@:\
-	:k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:kb@:kd@:kh@:kl@:kr@:ku@:vb@:\
-	:tc=tvi950-rv:
-ims-ansi|ultima2|ultimaII|IMS Ultima II:\
-	:am:bs:\
-	:co#80:it#8:li#24:\
-	:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:cm=\E[%i%2;%2H:do=\ED:\
-	:if=/usr/share/tabset/vt100:\
-	:is=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r:kd=\E[B:kh=\E[H:\
-	:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:se=\E[m\E[1m:\
-	:so=\E[7m:sr=\EM:ta=^I:ue=\E[m\E[1m:up=\EM:us=\E[4m:
-
-#### Intertec Data Systems
-#
-# I think this company is long dead as of 1995.  They made an early CP/M
-# micro called the "Intertec Superbrain" that was moderately popular,
-# then sank out of sight.
-#
-
-superbrain|intertec superbrain:\
-	:am:bs:bw:\
-	:co#80:li#24:\
-	:bc=^U:bl=^G:cd=\E~k<10*>:ce=\E~K:cl=\014:cm=\EY%+ %+ :\
-	:cr=^M:do=^J:kd=^J:kl=^U:kr=^F:ku=^K:le=^H:nd=^F:sf=^J:ta=^I:\
-	:te=^L:ti=^L:up=^K:
-# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
-# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
-# and the reverse is actually true.  Try it. -- esr)
-intertube|intertec|Intertec InterTube:\
-	:am:bs:\
-	:co#80:li#25:\
-	:bl=^G:cl=^L:cm=\EY%+ %+ :cr=^M:do=^J:ho=^A:le=^H:nd=^F:\
-	:se=\E0@:sf=^J:so=\E0P:up=^Z:
-# The intertube 2 has the "full duplex" problem like the tek 4025: if you
-# are typing and a command comes in, the keystrokes you type get interspersed
-# with the command and it messes up
-intertube2|intertec data systems intertube 2:\
-	:bs:\
-	:ce=\EK:ch=\020%B%.:cm=\016%.\020%B%.:cv=\013%.:\
-	:ll=^K^X\r:tc=intertube:
-
-#### Ithaca Intersystems
-#
-# This company made S100-bus personal computers long ago in the pre-IBM-PC
-# past.  They used to be reachable at:
-#
-#	Ithaca Intersystems
-#	1650 Hanshaw Road
-#	Ithaca, New York 14850
-#
-# However, the outfit went bankrupt years ago.
-#
-
-# The Graphos III was a color graphics terminal from Ithaca Intersystems.
-# These entries were written (originally in termcap syntax) by Brian Yandell
-# <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
-# University of Wisconsin.
-
-# (graphos: removed obsolete and syntactically incorrect :kn=4:,
-# removed :if=/usr/share/tabset/init.graphos: and
-# <rf=/usr/share/tabset/init.graphos> no such file & no :st: -- esr)
-graphos|graphos III:\
-	:am:mi:\
-	:co#80:it#8:li#24:\
-	:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
-	:UP=\E[%dA:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
-	:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:dm=\E[4h:do=\E[B:\
-	:ed=\E[4l:ei=\E[4l:ho=\E[H:im=\E[4h:k1=\EOP:k2=\EOQ:\
-	:k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\
-	:ku=\E[A:le=^H:me=\E[m:nd=\E[C:nw=^M\ED:rc=\E8:sc=\E7:\
-	:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:up=\E[A:\
-	:ve=\Ez56;2;0;0z\Ez73z\Ez4;1;1z:\
-	:vs=\Ez4;2;1z\Ez56;2;80;24z:
-graphos-30|graphos III with 30 lines:\
-	:li#30:\
-	:vs=\Ez4;2;1z\Ez56;2;80;30z:tc=graphos:
-
-#### Modgraph
-#
-# These people used to be reachable at:
-#
-#	Modgraph, Inc
-#	1393 Main Street,
-#	Waltham, MA 02154
-#	Vox: (617)-890-5796.
-#
-# However, if you call that number today you'll get an insurance company.
-# I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
-# 26 Feb 1997 that says:
-#
-# Modgraph GX-1000, replaced by GX-2000.  Both are out of production, have been
-# for ~7 years.  Modgraph still in business.  Products are rugged laptop and
-# portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
-# panel-mount etc).  I can be emailed at sonfour@aol.com
-#
-# Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
-# dated 1984.  According to the manual, it featured Tek 4010/4014
-# graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
-#
-
-modgraph|mod24|modgraph terminal emulating vt100:\
-	:xn@:\
-	:co#80:li#24:\
-	:is=\E^9;0s\E^7;1s\E[3g\E^11;9s\E^11;17s\E^11;25s\E^11;33s\E^11;41s\E^11;49s\E^11;57s\E^11;65s\E^11;73s\E^11;81s\E^11;89s:\
-	:rf@:sr=5\EM\E[K:vs=\E^9;0s\E^7;1s:tc=vt100:
-# The GX-1000 manual is dated 1984.  This looks rather like a VT-52.
-modgraph2|modgraph gx-1000 80x24 with keypad not enabled:\
-	:am:da:db:\
-	:co#80:it#8:li#24:\
-	:cd=50\EJ:ce=3\EK:cl=50\EH\EJ:cm=5\EY%+ %+ :\
-	:is=\E<\E^5;2s\E^7;1s\E[3g\E^11;9s\E^11;17s\E^11;25s\E^11;33s\E^11;41s\E^11;49s\E^11;57s\E^11;65s\E^11;73s\E^11;81s\E^11;89s\E^12;0s\E^14;2s\E^15;9s\E^25;1s\E^9;1s\E^27;1:\
-	:le=^H:nd=2\EC:sr=5\EI:ta=^I:up=2\EA:
-#
-# Modgraph from Nancy L. Cider <nancyc@brl-tbd>
-# BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
-# If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
-# mark and using delete-to-killbuffer work correctly.  However, we would
-# like normal mode of operation to be using a Modgraph with 48 line setting.
-# If we set TERM=mod (which is a valid entry in termcap with 48 lines)
-# the setting mark and delete-to-killbuffer results in the deletion of only
-# the line the mark is set on.
-# We've discovered that the delete-to-killbuffer works correctly
-# with TERM=mod and screen set to 80x48 but it's not obvious.  Only
-# the first line disappears but a ctrl-l shows that it did work
-# correctly.
-modgraph48|mod|Modgraph w/48 lines:\
-	:am:bs:pt:xn:\
-	:co#80:it#8:li#48:vt#3:\
-	:bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:do=^J:ho=\E[H:\
-	:is=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h:k1=\EOP:k2=\EOQ:\
-	:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
-	:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:\
-	:me=\E[m:mr=\E[7m:nd=\E[C:nl=^J:r1=\E=\E[0q\E>:rc=\E8:\
-	:sc=\E7:se=\E[m:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:\
-	:us=\E[4m:vb=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q:
-
-#### Morrow Designs
-#
-# This was George Morrow's company.  They started in the late 1970s making
-# S100-bus machines.  They used to be reachable at:
-#
-#        Morrow
-#        600 McCormick St.
-#        San Leandro, CA 94577
-#
-# but they're long gone now (1995).
-#
-
-# The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
-# Jeff's specimen was dated June 1984.
-# From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
-mt70|mt-70|Morrow MD-70; native Morrow mode:\
-	:am:mi:ms:xo:\
-	:co#80:it#8:li#24:\
-	:%1=^AO\r:F1=^A`\r:F2=^Aa\r:F3=^Ab\r:F4=^Ac\r:F5=^Ad\r:\
-	:F6=^Ae\r:F7=^Af\r:F8=^Ag\r:F9=^Ah\r:FA=^Ai\r:\
-	:ac=+z,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI:ae=\E%%%:al=\EE:\
-	:as=\E$:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:\
-	:ct=\E0:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:i1=\E"2\EG0\E]:ic=\EQ:\
-	:im=:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kB=^A^Z\r:kC=^An\r:\
-	:kD=\177:kb=^H:kd=^AK\r:kh=^AN\r:kl=^AL\r:kr=^AM\r:\
-	:ku=^AJ\r:le=^H:mh=\EG2:mk@:nd=^L:nw=^_:sf=^J:ta=^I:te=:\
-	:ti=\E"2\EG0\E]:up=^K:us=\EG1:vb=\EK1\EK0:ve=\E"2:vi=\E"0:\
-	:tc=adm+sgr:
-
-#### Motorola
-#
-
-# Motorola EXORterm 155	from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
-# (Seth H Zirin)
-ex155|Motorola Exorterm 155:\
-	:am:bs:bw:\
-	:co#80:kn#5:li#24:ug#1:\
-	:bt=\E[:cd=\ET:ce=\EU:cl=\EX:cm=\EE%+ %+ :do=\EB:ho=\E@:\
-	:kB=\E[:kC=\EX:kE=\EU:kS=\ET:kb=^H:kd=^J:kh=\E@:kl=^H:kr=^L:\
-	:ku=^K:nd=\ED:se=\Ec\ED:so=\Eb\ED:ta=\EZ:ue=\Eg\ED:\
-	:us=\Ef\ED:
-
-#### Omron
-#
-# This company is still around in 1995, manufacturing point-of-sale systems.
-
-omron|Omron 8025AG:\
-	:am:bs:da:db:\
-	:co#80:li#24:\
-	:al=\EL:bl=^G:cd=\ER:ce=\EK:cl=\EJ:cr=^M:dc=\EP:dl=\EM:do=^J:\
-	:ho=\EH:le=^H:nd=\EC:se=\E4:sf=\ES:so=\Ef:sr=\ET:up=\EA:\
-	:vs=\EN:
-
-#### Ramtek
-#
-# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
-# were competition for things like the Tektronics 4025.
-#
-
-# Ramtek 6221 from BRL, probably by Doug Gwyn
-# The following SET-UP modes are assumed for normal operation:
-#	UNDERLINE_CURSOR	ANSI_MODE	AUTO_XON/XOFF_ON
-#	NEWLINE_OFF		80_COLUMNS
-# Other SET-UP modes may be set for operator convenience or communication
-# requirements; I recommend
-#	SMOOTH_SCROLL	AUTO_REPEAT_ON	3_#_SHIFTED	WRAP_AROUND_ON
-# Hardware tabs are assumed to be every 8 columns; they can be set up by the
-# "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
-# Note that the Control-E key is useless on this brain-damaged terminal.  No
-# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-rt6221|Ramtek 6221 80x24:\
-	:bs:ms:pt:xo:\
-	:co#80:it#8:kn#4:li#24:vt#3:\
-	:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ac=:ae=^O:as=^N:\
-	:bl=^G:cd=\E[J:ce=\E[K:cl=\E[1;1H\E[J:cm=\E[%i%d;%dH:\
-	:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=^K:ho=\E[1;1H:is=\E)0:\
-	:k0=\EOP:k1=\EOQ:k2=\EOR:k3=\EOS:kb=^H:kd=\E[B:ke=\E>:\
-	:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:l0=PF1:l1=PF2:l2=PF3:l3=PF4:\
-	:le=^H:ll=\E[24;1H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:\
-	:nd=\E[C:nw=\EE:\
-	:r1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>:\
-	:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-	:ue=\E[m:up=\EM:us=\E[4m:ve=\E[>5h\E[>9h:vi=\E[>5l:\
-	:vs=\E[>7h\E[>9l:
-# [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
-rt6221-w|Ramtek 6221 160x48:\
-	:co#160:li#48:\
-	:ll=\E[48;1H:tc=rt6221:
-
-#### RCA
-#
-
-# RCA VP3301 or VP3501
-rca|rca vp3301/vp3501:\
-	:bs:\
-	:co#40:li#24:\
-	:cl=^L:cm=\EY%+ %+ :ho=^Z:nd=^U:se=\E\ES0:so=\E\ES1:up=^K:
-
-
-#### Selanar
-#
-
-# Selanar HiREZ-100 from BRL, probably by Doug Gwyn
-# The following SET-UP modes are assumed for normal operation:
-#	SET_DEFAULT_TABS	48_LINES		80_COLUMNS
-#	ONLINE			ANSI			CURSOR_VISIBLE
-#	VT102_AUTO_WRAP_ON	VT102_NEWLINE_OFF	VT102_MONITOR_MODE_OFF
-#	LOCAL_ECHO_OFF		US_CHAR_SET		WPS_TERMINAL_DISABLED
-#	CPU_AUTO_XON/XOFF_ENABLED			PRINT_FULL_SCREEN
-# For use with graphics software, all graphics modes should be set to factory
-# default.  Other SET-UP modes may be set for operator convenience or
-# communication requirements.  No delays are specified; use "stty ixon -ixany"
-# to enable DC3/DC1 flow control!
-# I commented out the scrolling capabilities since they are too slow.
-hirez100|Selanar HiREZ-100:\
-	:bs:mi:ms:pt:xo:\
-	:co#80:it#8:kn#4:li#48:vt#3:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ac=:ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:\
-	:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
-	:dc=\E[P:dl=\E[M:do=^J:ho=\E[H:is=\E<\E)0:k0=\EOP:k1=\EOQ:\
-	:k2=\EOR:k3=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
-	:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=PF1:l1=PF2:l2=PF3:l3=PF4:\
-	:le=^H:ll=\E[48H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:\
-	:nd=\E[C:nw=\EE:pf=\E[4i\E[?4i:po=\E[?5i\E[5i:ps=\E[i:\
-	:r1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>:\
-	:rc=\E8:sc=\E7:se=\E[m:so=\E[7m:st=\EH:ta=^I:ue=\E[m:up=\EM:\
-	:us=\E[4m:
-hirez100-w|Selanar HiREZ-100 in 132-column mode:\
-	:co#132:tc=hirez100:
-
-#### Signetics
-#
-
-# From University of Wisconsin
-vsc|Signetics Vsc Video driver by RMC:\
-	:am:ms:\
-	:co#80:it#8:li#26:\
-	:ce=\E[K:cl=50\E[;H\E[2J:cm=\E[%i%d;%dH:cr=^M:do=^J:\
-	:ho=\E[H:kb=^H:kd=^J:kl=^H:le=^H:me=^_!:mr=^_\s:nd=\E[C:\
-	:nw=^M^J:se=^_!:sf=^J:so=^_\s:ta=^I:ue=^_#:up=\E[A:us=^_":
-
-#### Soroc
-#
-# Alan Frisbie <frisbie@flying-disk.com> writes:
-#
-# As you may recall, the Soroc logo consisted of their name,
-# with the letter "S" superimposed over an odd design.   This
-# consisted of a circle with a slightly smaller 15 degree (approx.)
-# wedge with rounded corners inside it.   The color was sort of
-# a metallic gold/yellow.
-#
-# If I had been more of a beer drinker it might have been obvious
-# to me, but it took a clue from their service department to make
-# me exclaim, "Of course!"   The circular object was the top of
-# a beer can (the old removable pop-top style) and "Soroc" was an
-# anagram for "Coors".
-#
-# I can just imagine the founders of the company sitting around
-# one evening, tossing back a few and trying to decide what to
-# call their new company and what to use for a logo.
-#
-
-# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
-soroc120|iq120|soroc|soroc iq120:\
-	:cd=\EY:ce=\ET:cl=\E*:do=^J:kd=^J:kl=^H:kr=^L:ku=^K:tc=adm3a:
-soroc140|iq140|soroc iq140:\
-	:am:bs:mi:\
-	:co#80:li#24:\
-	:al=\Ee:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E+:cm=\E=%+ %+ :\
-	:cr=^M:dc=\Ew:dl=\Er:do=^J:ei=\E8:ho=^^:im=\E9:k0=^A0\r:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kh=^^:kr=^L:ku=^K:le=^H:\
-	:ll=^^^K:nd=^L:se=\E\177:sf=^J:so=\E\177:ue=\E^A:up=^K:\
-	:us=\E^A:
-
-#### Southwest Technical Products
-#
-# These guys made an early personal micro called the M6800.
-# The ct82 was probably its console terminal.
-#
-
-# (swtp: removed obsolete ":bc=^D:" -- esr)
-swtp|ct82|southwest technical products ct82:\
-	:am:\
-	:co#82:li#20:\
-	:al=^^Y:bl=^G:cd=^V:ce=^F:cl=^L:cm=\013%r%.%.:cr=^M:dc=^^H:\
-	:dl=^Z:do=^J:ei=:ho=^P:ic=^^X:im=:\
-	:is=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011:\
-	:le=^D:ll=^C:nd=^S:se=^^^F:sf=^N:so=^^^V:sr=^O:up=^A:
-
-#### Synertek
-#
-# Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
-#
-# Synertek used to make ICs, various 6502-based single-board process
-# control and hobbyist computers, and assorted peripherals including a
-# series of small inexpensive terminals (I think they were one of the
-# first to have a "terminal-on-a-keyboard", where the terminal itself
-# was only slightly larger than the keyboard).
-#
-# They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
-# was a 40x24 terminal that could connect to a standard TV through a
-# video modulator.  The KTM-2/80 was the 80-column version (the 2/40
-# could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
-# I have a KTM-2/80 still in working order.  The KTM-2s had fully
-# socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
-# ROM and 2 ROMs as character generators. They were incredibly simple,
-# and I've never had any problems with mine (witness the fact that mine
-# was made in 1981 and is still working great... I've blown the video
-# output transistor a couple of times, but it's a 2N2222 :-)
-#
-# The KTM-3 (which is what is listed in the terminfo file) was their
-# attempt at putting a KTM-2 in a box (and some models came with a
-# CRT). It wasn't much different from the KTM-2 hardware-wise, but the
-# control and escape sequences are very different. The KTM-3 was always
-# real broken, at least according to the folks I've talked to about it.
-#
-# The padding in the entry is probably off--these terminals were very
-# slow (it takes like 100ms for the KTM-2 to clear the screen...) And
-# anyone with any sanity replaced the ROMs with something that provided
-# a reasonable subset of VT100 functionality, since the usual ROMs were
-# obviously very primitive... oh, you could get an upgraded ROM from
-# Synertek for some incredible amount of money, but what hacker with an
-# EPROM burner would do that? :)
-#
-# Sorry I don't have any contact info; I believe they were located in
-# Sunnyvale, and I'm fairly sure they are still manufacturing ICs
-# (they've gone to ASICs and FPGAs), but I doubt they're in the computer
-# business these days.
-#
-
-# Tested, seems to work fine with vi.
-synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal:\
-	:am:\
-	:co#80:li#24:\
-	:cd=\EJ:ce=\EK:cl=^Z:cm=\E=%+ %+ :le=^H:nd=^L:up=^K:
-
-#### Tab Office Products
-#
-#	TAB Products Co. - Palo Alto, California
-#	Electronic Office Products,
-#	1451 California Avenue 94304
-#
-# I think they're out of business.
-#
-
-# The tab 132 uses xon/xoff, so no padding needed.
-# :ks:/:ke: have nothing to do with arrow keys.
-# :is: sets 80 col mode, normal video, autowrap on (for :am:).
-# Seems to be no way to get rid of status line.
-# The manual for this puppy was dated June 1981.  It claims to be VT52-
-# compatible but looks more vt100-like.
-tab132|tab|tab132-15|tab 132/15:\
-	:da:db:\
-	:co#80:dN@:li#24:lm#96:\
-	:al=\E[L:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:\
-	:im=\E[4h:is=\E[?7h\E[?3l\E[?5l:kd=\E[B:ke@:kl=\E[D:ks@:\
-	:ku=\E[A:tc=vt100:
-tab132-w|tab132 in wide mode:\
-	:co#132:\
-	:is=\E[?7h\E[?3h\E[?5l:tc=tab132:
-tab132-rv|tab132 in reverse-video mode:\
-	:is=\E[?7h\E[?3l\E[?5h:tc=tab132:
-tab132-w-rv|tab132 in reverse-video/wide mode:\
-	:is=\E[?7h\E[?3h\E[?5h:tc=tab132-w:
-
-
-#### Teleray
-#
-#	Research Incorporated
-#	6425 Flying Cloud Drive
-#	Eden Prairie, MN 55344
-#	Vox: (612)-941-3300
-#
-# The Teleray terminals were all discontinued in 1992-93.  RI still services
-# and repairs these beasts, but no longer manufactures them.  The Teleray
-# people believe that all the types listed below are very rare now (1995).
-# There was a newer line of Telerays (Model 7, Model 20, Model 30, and
-# Model 100) that were ANSI-compatible.
-#
-# Note two things called "teleray".  Reorder should move the common one
-# to the front if you have either.  A dumb teleray with the cursor stuck
-# on the bottom and no obvious model number is probably a 3700.
-#
-
-t3700|dumb teleray 3700:\
-	:bs:\
-	:co#80:li#24:\
-	:bl=^G:cl=^L:cr=^M:do=^J:le=^H:sf=^J:
-t3800|teleray 3800 series:\
-	:bs:\
-	:co#80:it#8:li#24:\
-	:bl=^G:cd=\EJ:ce=\EK:cl=^L:cm=\EY%+ %+ :cr=^M:do=^J:ho=\EH:\
-	:le=^H:ll=\EY7\s:nd=\EC:sf=^J:ta=^I:up=^K:
-t1061|teleray|teleray 1061:\
-	:am:bs:km:xs:xt:\
-	:co#80:it#8:li#24:sg#1:ug#1:\
-	:al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\014:cm=\EY%+ %+ :cr=^M:\
-	:ct=\EG:dc=\EQ:dl=\EM:do=^J:ei=:ho=\EH:ic=\EP:im=:ip=:\
-	:is=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef:\
-	:k1=^Z1:k2=^Z2:k3=^Z3:k4=^Z4:k5=^Z5:k6=^Z6:k7=^Z7:k8=^Z8:\
-	:le=^H:nd=\EC:se=\ER@:sf=^J:so=\s\ERD:st=\EF:ta=^I:ue=\ER@:\
-	:up=\EA:us=\ERH:
-t1061f|teleray 1061 with fast PROMs:\
-	:al=\EL:dl=\EM:ip@:tc=t1061:
-# "Teleray Arpa Special", officially designated as
-# "Teleray Arpa network model 10" with "Special feature 720".
-# This is the new (1981) fast microcode updating the older "arpa" proms
-# (which gave meta-key and programmable-fxn keys).  720 is much much faster,
-# converts the keypad to programmable function keys, and has other goodies.
-# Standout mode is still broken (magic cookie, etc) so is suppressed as no
-# programs handle such lossage properly.
-# Note: this is NOT the old termcap's "t1061f with fast proms."
-# From: J. Lepreau <lepreau@utah-cs> Tue Feb  1 06:39:37 1983, Univ of Utah
-# (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
-t10|teleray 10 special:\
-	:bs:km:xs:xt:\
-	:co#80:it#8:li#24:sg#2:ug#2:\
-	:al=\EL:cd=\EJ:ce=\EK:cl=30\Ej:cm=\EY%+ %+ :dc=\EQ:dl=\EM:\
-	:ei=:ho=\EH:ic=\EP:im=:le=^H:nd=\EC:pc=\0:se=\ER@:sf=\Eq:\
-	:so=\ERD:sr=\Ep:ta=^I:ue=\ER@:up=\EA:us=\ERH:
-# teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
-# back/forth words. Put the function keys (f1-f10) where they can be
-# found, and turn off the other magic keys along the top row, except
-# for line/local. Do the magic appropriate to make the page shifts work.
-# Also toggle ^S/^Q for those of us who use Emacs.
-t16|teleray 16:\
-	:am:da:db:mi:xs:xt:\
-	:co#80:li#24:\
-	:al=\E[L:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:\
-	:cm=%i\E[%d;%df:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:\
-	:ho=\E[H:im=\E[4h:k1=^Z1:k2=^Z2:k3=^Z3:k4=^Z4:k5=^Z5:k6=^Z6:\
-	:k7=^Z7:k8=^Z8:k9=^Z9:k;=^Z0:le=^H:me=\E[m:nd=\E[C:se=\E[m:\
-	:sf=^J:so=\E[7m:sr=\E[T:ta=^I:te=\E[V\E[24;1f\E[?38h:\
-	:ti=\E[U\E[?38l:ue=\E[m:up=\E[A:us=\E[4m:
-
-#### Texas Instruments (ti)
-#
-
-# The Silent 700 was so called because it was built around a quiet thermal
-# printer.  It was portable, equipped with an acoustic coupler, and pretty
-# neat for its day.
-ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800:\
-	:bs:hc:os:\
-	:co#80:\
-	:bl=^G:cr=\r:do=^J:le=^H:sf=^J:
-
-#
-# Texas Instruments 916 VDT 7 bit control mode
-#
-ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL:\
-	:da:db:in:ms:\
-	:%9=^X:@4=\E[29~:@8=^J:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
-	:DO=\E[%dB:F1=\E[29~:F2=\E[31~:IC=\E[%d@:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=\017:as=\016:bt=\E[Z:cb=\E[1K:\
-	:cd=\E[J:ce=\E[0K:ch=\E[%+^AG:cl=\E[H\E[2J:\
-	:cm=\E[%i%d;%dH:ct=\E[3g:cv=\E[%+^Ad:dc=\E[P:eA=\E(B\E)0:\
-	:ec=\E[%dX:ei=:ff=^L:im=:ip=:is=\E[1;24r\E[24;1H:k1=\E[17~:\
-	:k2=\E[18~:k3=\E[19~:k4=\E[20~:k5=\E[21~:k6=\E[23~:\
-	:k7=\E[24~:k8=\E[25~:k9=\E[26~:k;=\E[28~:kD=\E[P:kI=\E[@:\
-	:kN=\E[S:kP=\E[T:kh=\E[H:mp=\E&:rs=\E[!p:st=\E[0W:\
-	:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:vs=\E[?25h:\
-	:tc=vt220:
-#
-# Texas Instruments 916 VDT 8 bit control mode
-#
-ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL:\
-	:%9=^X:@4=\23329~:@8=^J:F1=\23329~:F2=\23331~:k1=\23317~:\
-	:k2=\23318~:k3=\23319~:k4=\23320~:k5=\23321~:k6=\23323~:\
-	:k7=\23324~:k8=\23325~:k9=\23326~:k;=\23328~:kD=\233P:\
-	:kI=\233@:kN=\233S:kP=\233T:kd=\233B:kh=\233H:kl=\233D:\
-	:kr=\233C:ku=\233A:tc=ti916:
-#
-# Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
-#
-ti916-132|Texas Instruments 916 VDT vt220 132 column:\
-	:co#132:tc=ti916:
-#
-# Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
-#
-ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column:\
-	:co#132:tc=ti916-8:
-ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL:\
-	:am:bs:xo:\
-	:co#80:it#8:li#24:\
-	:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\
-	:cm=%i\E[%d;%dH:cr=^M:cs=%i\E[%d;%dr:ct=\E[3g:dl=\E[M:\
-	:do=\E[B:ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[16~:\
-	:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[P:kI=\E[@:\
-	:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:\
-	:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:\
-	:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:\
-	:us=\E[4m:ve=\E[?25h:vi=\E[?25l:vs=\E[?31h:
-ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL:\
-	:am:xo:\
-	:co#80:it#8:li#24:\
-	:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\
-	:cm=%i\E[%d;%dH:cr=^M:cs=%i\E[%d;%dr:ct=\E[3g:dl=\E[M:\
-	:do=\E[B:ho=\E[H:k1=P\217>:k2=Q\217>:k3=R\217>:k4=S\217>:\
-	:k5=~\23316>:k6=~\23317>:k7=~\23318>:k8=~\23319>:\
-	:k9=~\23320>:kD=P\233>:kI=@\233>:kb=^H:kd=\E[B:kl=\E[D:\
-	:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[m:\
-	:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:\
-	:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:\
-	:vi=\E[?25l:vs=\E[?31h:
-ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode:\
-	:co#132:tc=ti924:
-ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode:\
-	:co#132:tc=ti924-8:
-ti931|Texas Instruments 931 VDT:\
-	:am:bs:xo:\
-	:co#80:li#24:\
-	:al=\EN:bl=^G:cd=\EJ:ce=\EI:cl=\EL:cm=\EY%+ %+ :cr=^M:\
-	:dc=\EQ:dl=\EO:do=\EB:ei=:ho=\EH:ic=\ER\EP\EM:im=:\
-	:is=\EGB\E(@B@@\E):k1=\Ei1:k2=\Ei2:k3=\Ei3:k4=\Ei4:\
-	:k5=\Ei5:k6=\Ei6:k7=\Ei7:k8=\Ei8:k9=\Ei9:kA=\EN:kD=\EQ:\
-	:kI=\EP:kL=\EO:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=\ED:mb=\E4P:\
-	:me=\E4@:mk=\E4H:mr=\E4B:nd=\EC:se=\E4@:sf=\Ea:so=\E4A:\
-	:sr=\Eb:ue=\E4@:up=\EA:us=\E4D:ve=\E4@:
-ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL:\
-	:cs@:sf=\E[1S:sr=\E[1T:tc=ti924:
-# (ti926-8: I corrected this from the broken SCO entry -- esr)
-ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL:\
-	:cs@:sf=\2331S:sr=\2331T:tc=ti924-8:
-ti_ansi|basic entry for ti928:\
-	:am:eo:ut:xn:xo:\
-	:Co#8:co#80:it#8:li#25:pa#64:\
-	:@7=\E[F:AB=\E[4%dm:AF=\E[3%dm:al=\E[L:bl=^G:bt=\E[Z:\
-	:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:\
-	:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
-	:ic=\E[@:im=:k0=\E[V:k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:\
-	:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:kN=\E[G:kP=\E[I:\
-	:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
-	:mb=\E[5m:md=\E[1m:me=\E[m:nd=\E[C:op=\E[37;40m:se=\E[m:\
-	:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
-#
-#       928 VDT 7 bit control mode
-#
-ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL:\
-	:%9=\E[35~:@7=\E_1\E\\:@8=\E[8~:F1=\E[29~:F2=\E[31~:\
-	:F3=\E[32~:F5=\E[34~:k1=\E[17~:k2=\E[18~:k3=\E[19~:\
-	:k4=\E[20~:k5=\E[21~:k6=\E[23~:k7=\E[24~:k8=\E[25~:\
-	:k9=\E[26~:k;=\E[28~:kD=\E[P:kI=\E[@:kN=\E[S:kP=\E[T:\
-	:tc=ti_ansi:
-#
-#       928 VDT 8 bit control mode
-#
-ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL:\
-	:%9=\23335~:@7=\2371\234:@8=\2338~:F1=\23329~:F2=\23331~:\
-	:F3=\23332~:F5=\23334~:k1=\23317~:k2=\23318~:k3=\23319~:\
-	:k4=\23320~:k5=\23321~:k6=\23323~:k7=\23324~:k8=\23325~:\
-	:k9=\23326~:k;=\23328~:kD=\233P:kI=\233@:kN=\233S:\
-	:kP=\233T:kh=\233H:tc=ti_ansi:
-
-#### Zentec (zen)
-#
-
-# (zen30: removed obsolete :ma=^L ^R^L^K^P:.  This entry originally
-# had just :so:=\EG6 which I think means standout was supposed to be
-# dim-reverse using ADM12-style attributes. ADM12 :us:/:ue: and
-# <invis> might work-- esr)
-zen30|z30|zentec 30:\
-	:am:bs:mi:ul:\
-	:co#80:li#24:\
-	:al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :cr=^M:\
-	:dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:le=^H:mh=\EG2:nd=^L:\
-	:sf=^J:so=\EG6:ue@:up=^K:us@:tc=adm+sgr:
-# (zen50: this had extension capabilities
-#	:BS=^U:CL=^V:CR=^B:
-# UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
-# which were also in the original entry -- esr)
-# (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
-zen50|z50|zentec zephyr:\
-	:am:bs:\
-	:co#80:li#24:sg#1:\
-	:al=\EE:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :dc=\EW:dl=\ER:ei=:\
-	:ic=\EQ:im=:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:mk@:ue@:up=^K:\
-	:us@:tc=adm+sgr:
-
-# CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
-cci|cci1|z8001|zen8001|CCI Custom Zentec 8001:\
-	:am:bs:bw:\
-	:co#80:li#24:\
-	:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cs=\ER%+ %+ :do=^J:\
-	:ho=\EH:is=\EM \EF\ET\EP\ER 7:kb=^H:kd=\EB:kh=\EH:kl=\ED:\
-	:kr=\EC:ku=\EA:le=^H:mb=\EM":me=\EM\s:mh=\EM!:mk=\EM(:\
-	:mr=\EM$:nd=\EC:pf=^T:po=^R:se=\EM\s:so=\EM$:sr=\EI:\
-	:ue=\EM\s:up=\EA:us=\EM0:ve=\EP:vs=\EF\EQ\EM \ER 7:
-
-######## OBSOLETE UNIX CONSOLES
-#
-
-#### Apollo consoles
-#
-# Apollo got bought by Hewlett-Packard.  The Apollo workstations are
-# labeled HP700s now.
-#
-
-# From: Gary Darland <goodmanc@garnet.berkeley.edu>
-apollo|apollo console:\
-	:am:bs:mi:\
-	:co#88:li#53:\
-	:al=\EI:cd=\EJ:ce=\EK:ch=\EN%d:cl=^L:cm=\EM%+ %d):\
-	:cv=\EO+\s:dc=\EP:dl=\EL:do=\EB:ei=\ER:im=\EQ:le=^H:nd=\EC:\
-	:se=\ET:sf=\EE:so=\ES:sr=\ED:te=\EX:ti=\EW:ue=\EV:up=\EA:\
-	:us=\EU:
-
-# We don't know whether or not the apollo guys replicated DEC's firmware bug
-# in the VT132 that reversed :ei:/:im:.  To be on the safe side, disable
-# both these capabilities.
-apollo_15P|apollo 15 inch display:\
-	:ei@:im@:tc=vt132:
-apollo_19L|apollo 19 inch display:\
-	:ei@:im@:tc=vt132:
-apollo_color|apollo color display:\
-	:ei@:im@:tc=vt132:
-
-#### Convergent Technology
-#
-# Burroughs bought Convergent shortly before it merged with Univac.
-# CTOS is (I believe) dead.  Probably the aws is too (this entry dates
-# from 1991 or earlier).
-#
-
-# Convergent AWS workstation from Gould/SEL UTX/32 via BRL
-# (aws: removed unknown :dn=^K: -- esr)
-aws|Convergent Technologies AWS workstation under UTX and Xenix:\
-	:am:\
-	:co#80:li#28:sg#0:ug#0:\
-	:ac=:ae=\EAAF:al=\EIL:as=\EAAN:bc=^H:cd=\EEF:ce=\EEL:\
-	:ch=\EH%.:cl=^L:cm=\EC%r%.%.:cv=\EV%.:dc=\EDC:dl=\EDL:\
-	:do=^K:ei=:ic=\EIC:im=:kb=^H:kd=^K:kl=^N:kr=^R:ku=^A:\
-	:ma=\016h\013j\001k\022l\002m:nd=^R:nl=^J:se=\EARF:\
-	:sf=\ESU:so=\EARN:sr=\ESD:ue=\EAUF:up=^A:us=\EAUN:
-awsc|Convergent Technologies AWS workstation under CTOS:\
-	:am:\
-	:co#80:li#24:sg#0:ug#0:\
-	:ac=:ae=\EAAF:as=\EAAN:bc=^N:cd=\EEF:ce=\EEL:cl=^L:\
-	:cm=\EC%r%.%.:do=^K:kb=^H:kd=^K:kl=^N:kr=^R:ku=^A:\
-	:ma=\016h\013j\001k\022l\002m:nd=^R:se=\EAA:so=\EAE:\
-	:ue=\EAA:up=^A:us=\EAC:
-
-#### DEC consoles
-#
-
-# The MicroVax console.  Tim Theisen <tim@cs.wisc.edu> writes:
-# The digital uVax II's had a graphic display called a qdss.  It was
-# supposed to be a high performance graphic accelerator, but it was
-# late to market and barely appeared before faster dumb frame buffers
-# appeared.  I have only used this display while running X11.  However,
-# during bootup, it was in text mode, and probably had a terminal emulator
-# within it.  And that is what your termcap entry is for.  In graphics
-# mode the screen size is 1024x864 pixels.
-qdss|qdcons|qdss glass tty:\
-	:am:bs:\
-	:co#128:li#57:\
-	:cl=1\032:cm=\E=%.%.:do=^J:le=^H:nd=^L:up=^K:
-
-#### Fortune Systems consoles
-#
-# Fortune made a line of 68K-based UNIX boxes that were pretty nifty
-# in their day; I (esr) used one myself for a year or so around 1984.
-# They had no graphics, though, and couldn't compete against Suns and
-# the like.  R.I.P.
-#
-
-# From: Robert Nathanson <c160-3bp@Coral> via tut   Wed Oct 5, 1983
-# (This had extension capabilities
-#	:rv=\EH:re=\EI:rg=0:GG=0:\
-#	:CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
-#	:RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
-#	:PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
-# It had both ":bs:" and ":bs=^H:"; I removed the latter.  Also, it had
-# ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
-# to force both magic cookie glitches off.  Once upon a time, I
-# used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
-# function keys; thus the "Al" value for HM was certainly an error.  I renamed
-# EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
-# I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
-# "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
-# names below.  I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
-fos|fortune|Fortune system:\
-	:am:bs:bw:\
-	:co#80:li#25:\
-	:@7=^Ak\r:@8=^Aq:ac=j*k(l m"q&v%w#x-:ae=^O:al=\034E:\
-	:as=\Eo:bl=^G:cd=\034Y:ce=^\Z:cl=\014:cm=\034C%+ %+ :cr=^M:\
-	:dc=\034W:dl=\034R:do=\n:ei=:ho=\036:ic=\034Q:im=:is=^_..:\
-	:k1=^Aa\r:k2=^Ab\r:k3=^Ac\r:k4=^Ad\r:k5=^Ae\r:k6=^Af\r:\
-	:k7=^Ag\r:k8=^Ah\r:kN=^Ao\r:kP=^An\r:kb=^H:kd=^Ay\r:\
-	:kh=^A?\r:kl=^Aw\r:kr=^Az\r:ku=^Ax\r:le=^H:mb=\EN:me=\EI:\
-	:mr=\EH:nw=^M^J:se=^\I`:sf=^J:so=^\H`:ta=^Z:ue=^\IP:up=\013:\
-	:us=^\HP:ve=\E\\:vi=\E]:vs=\E\::
-
-#### Masscomp consoles
-#
-# Masscomp has gone out of business.  Their product line was purchased by
-# comany in Georgia (US) called "XS International", parts and service may
-# still be available through them.
-#
-
-# (masscomp: ":MT:" changed to ":km:";  -- esr)
-masscomp|masscomp workstation console:\
-	:bs:km:mi:\
-	:co#80:it#8:li#24:\
-	:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:dc=\E[P:\
-	:dl=\E[M:do=\E[B:ei=\E[4l:im=\E[4h:is=\EGc\EGb\EGw:kb=^H:\
-	:kd=\EOB:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:nd=\E[C:se=\E[m:\
-	:so=\E[7m:ta=^I:ue=\EGau:up=\E[A:us=\EGu:
-masscomp1|masscomp large screen version 1:\
-	:co#104:li#36:tc=masscomp:
-masscomp2|masscomp large screen version 2:\
-	:co#64:li#21:tc=masscomp:
-
-######## OTHER OBSOLETE TYPES
-#
-# These terminals are *long* dead -- these entries are retained for
-# historical interest only.
-#
-
-#### Obsolete non-ANSI software emulations
-#
-
-# CTRM terminal emulator
-# 1. underlining is not allowed with colors: first, is is simulated by
-# black on white, second, it disables background color manipulations.
-# 2. BLINKING, REVERSE and BOLD are allowed with colors,
-# so we have to save their status in the static registers A, B and H
-# respectively, to be able to restore them when color changes
-# (because any color change turns off ALL attributes)
-# 3. :md: and :mr: sequences alternate modes,
-# rather then simply  entering them.  Thus we have to check the
-# static register B and H to determine the status, before sending the
-# escape sequence.
-# 4. :me: now must set the status of all 3 register (A,B,H) to zero
-# and then reset colors
-# 5. implementation of the protect mode would badly penalize the performance.
-# we would have to use \E&bn sequence to turn off colors (as well as all
-# other attributes), and keep the status of protect mode in yet another
-# static variable.  If someone really needs this mode, they would have to
-# create another terminfo entry.
-# 6. original color-pair is white on black.
-# store the information about colors into static registers
-# 7. set foreground color.  it performs the following steps.
-#   1) turn off all attributes
-#   2) turn on the background and video attributes that have been turned
-#      on before (this information is stored in static registers X,Y,Z,A,B,H,D).
-#   3) turn on foreground attributes
-#   4) store information about foreground into U,V,W static registers
-# 8. turn on background: similar to turn on foreground above
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-ctrm|C terminal emulator:\
-	:am:ut:xo:\
-	:Co#8:NC#2:Nl#0:co#80:lh#0:li#24:lm#0:lw#0:pa#63:pb#19200:vt#6:\
-	:al=\EL:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:ch=\E&a%dC:cl=\EH\EJ:\
-	:cm=\E&a%r%dc%dY:cr=^M:ct=\E3:cv=\E&a%dY:dc=\EP:dl=\EM:\
-	:do=^J:ei=\ER:im=\EQ:ip=:is=\E&jA\r:k1=\Ep\r:k2=\Eq\r:\
-	:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:k7=\Ev\r:k8=\Ew\r:\
-	:kb=^H:kd=\Ew\r:ke=\E&jA:kh=\Ep\r:kl=\Eu\r:kr=\Ev\r:\
-	:ks=\E&jB:ku=\Et\r:le=^H:mb=\E&dA%{1}%PA:\
-	:md=%?%gH%{0}%=%t\E&dH%{1}%PH%;:\
-	:me=\E&d@%{0}%PA%{0}%PB%{0}%PH:\
-	:mr=%?%gB%{0}%=%t\E&dB%{1}%PB%;:nd=\EC:\
-	:op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU:\
-	:sf=^J:so=\E&dD:st=\E1:ta=\011:up=\EA:us=\E&dD:
-
-# gs6300 - can't use blue foreground, it clashes with underline;
-# it's simulated with cyan
-# Bug: The <op> capability probably resets attributes.
-# (gs6300: commented out <rmln> (no <smln>) --esr)
-gs6300|emots|AT&T PC6300 with EMOTS terminal emulator:\
-	:am:ms:ut:xo:\
-	:Co#8:co#80:it#8:li#24:pa#63:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:Sb=\E[?;%dm:\
-	:..Sf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m:\
-	:UP=\E[%dA:\
-	:ac=++,,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:\
-	:ei=:ho=\E[H:ic=\E[@:im=:is=\E[m:k1=\E[0s:k2=\E[24s:\
-	:k3=\E[1s:k4=\E[23s:k5=\E[2s:k6=\E[22s:k7=\E[3s:k8=\E[21s:\
-	:kB=^R^I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
-	:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\E[10m:mr=\E[7m:nd=\E[C:\
-	:op=\E[?;m:pf=\E[4i:po=\E[5i:r1=\Ec:sf=^J:so=\E[1m:sr=\E[L:\
-	:ta=^I:up=\E[A:us=\E[4m:
-
-# From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
-# MS-Kermit with Heath-19 emulation mode enabled
-# (h19k: changed ":pt@:" to ":it@"
-h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin):\
-	:am@:da:db:xt:\
-	:it@:\
-	:ta@:tc=h19-u:
-
-# Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
-# Software (formerly Peripherals Computers & Supplies, Inc) of
-# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376.  They can
-# also be reached at support@synergy.com.
-versaterm|versaterm vt100 emulator for the macintosh:\
-	:am:xn:\
-	:co#80:it#8:li#24:\
-	:al=9\E[1L:bl=^G:cd=50\E[J:ce=3\E[K:cl=50\E[;H\E[2J:\
-	:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=7\E[1P:\
-	:dl=9\E[1M:do=^J:ei=:ho=\E[H:ic=7\E[1@:im=:\
-	:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
-	:kb=^H:kd=\EOB:ke=\E>\E[?1l:kl=\EOD:kr=\EOC:ks=\E=\E[?1h:\
-	:ku=\EOA:le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:\
-	:nd=2\E[C:nw=^M^J:r1=\E>:rc=\E8:\
-	:rf=/usr/share/tabset/vt100:sc=\E7:se=2\E[m:so=2\E[7m:\
-	:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:us=2\E[4m:
-
-# From: Rick Thomas <ihnp4!btlunix!rbt>
-# (xtalk: I added <rmam>/<smam> based on the init string.
-xtalk|IBM PC with xtalk communication program (versions up to 3.4):\
-	:am:mi:ms:xo:\
-	:co#80:it#8:li#24:sg#1:vt#3:\
-	:@8=\EOM:DO=\E[%dB:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:K5=\EOn:\
-	:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
-	:ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
-	:ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
-	:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dl=\E[M:do=^J:\
-	:eA=\E(B\E)0:ho=\E[H:k0=\EOy:k1=\EOP:k2=\EOQ:k3=\EOR:\
-	:k4=\EOS:k5=\EOt:k6=\EOu:k7=\EOv:k8=\EOl:k9=\EOw:k;=\EOx:\
-	:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
-	:ku=\EOA:le=^H:me=\E[m:nd=\E[C:\
-	:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:se=\E[m\s:sf=^J:\
-	:so=\E[7m\s:sr=\EM:st=\EH:ta=^I:up=\E[A:
-
-# The official PC terminal emulator program of the AT&T Product Centers.
-# Note - insert mode commented out - doesn't seem to work on AT&T PC.
-simterm|attpc running simterm:\
-	:am:\
-	:co#80:li#24:\
-	:al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\E=%+ %+ :cr=^M:\
-	:dc=\ER:dl=\EM:do=\EB:ho=\EH:le=^H:me=\E&d@:nd=\EC:se=\E&d@:\
-	:sf=^J:so=\E&dB:te=\EVE:ti=\EVS:up=\EA:
-
-#### Daisy wheel printers
-#
-# This section collects Diablo, DTC, Xerox, Qume, and other daisy
-# wheel terminals.  These are now largely obsolete.
-#
-
-# (diablo1620: removed :if=/usr/share/tabset/xerox1720:, no such file -- esr)
-diablo1620|diablo1720|diablo450|ipsi|diablo 1620:\
-	:hc:os:\
-	:co#132:it#8:\
-	:ch=\E\011%i%.:ct=\E2:do=^J:hd=\ED:hu=\EU:kb=^H:le=^H:\
-	:st=\E1:ta=^I:up=\E^J:
-diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin:\
-	:co#124:\
-	:is=\r        \E9:tc=diablo1620:
-# (diablo1640: removed :if=/usr/share/tabset/xerox1730:, no such file -- esr)
-diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640:\
-	:bl=^G:se=\E&:so=\EW:ue=\ER:us=\EE:tc=diablo1620:
-# (diablo1640-lm: removed :if=/usr/share/tabset/xerox1730-lm:, no such
-# file -- esr)
-diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin:\
-	:co#124:\
-	:se=\E&:so=\EW:ue=\ER:us=\EE:tc=diablo1620:
-diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer:\
-	:tc=diablo1640-lm:
-# DTC 382 with VDU.  Has no :cd: so we fake it with :ce:.  Standout
-# :so=^P\s\002^PF: works but won't go away without dynamite :se=^P\s\0:.
-# The terminal has tabs, but I'm getting tired of fighting the braindamage.
-# If no tab is set or the terminal's in a bad mood, it glitches the screen
-# around all of memory.  Note that return puts a blank ("a return character")
-# in the space the cursor was at, so we use ^P return (and thus ^P newline for
-# newline).  Note also that if you turn off :pt: and let Unix expand tabs,
-# curses won't work (some old BSD versions) because it doesn't clear this bit,
-# and cursor addressing sends a tab for row/column 9.  What a losing terminal!
-# I have been unable to get tabs set in all 96 lines - it always leaves at
-# least one line with no tabs in it, and once you tab through that line,
-# it completely weirds out.
-# (dtc382: change :te: to :ti: -- it  just does a clear --esr)
-dtc382|DTC 382:\
-	:am:da:db:xs:\
-	:co#80:li#24:lm#96:\
-	:al=^P^Z:bl=^G:cd=\020\025\020\023\020\023:ce=^P^U:\
-	:cl=\020\035:cm=\020\021%r%.%.:cr=^P^M:dc=^X:dl=^P^S:\
-	:ei=^Pi:ho=^P^R:im=^PI:le=^H:nd=^PR:pc=\177:sf=^J:te=:\
-	:ti=\020\035:ue=^P \0:up=^P^L:us=^P ^P:ve=^Pb:vs=^PB:
-dtc300s|DTC 300s:\
-	:hc:os:\
-	:co#132:\
-	:bl=^G:cr=^M:ct=\E3:do=^J:ff=^L:hd=\Eh:hu=\EH:kb=^H:le=^H:\
-	:sf=^J:st=\E1:ta=^I:up=^Z:
-gsi|mystery gsi terminal:\
-	:hc:os:\
-	:co#132:\
-	:bl=^G:cr=^M:do=^J:hd=\Eh:hu=\EH:le=^H:sf=^J:ta=^I:up=^Z:
-aj830|aj832|aj|anderson jacobson:\
-	:hc:os:\
-	:bl=^G:cr=^M:do=^J:hd=\E9:hu=\E8:le=^H:sf=^J:up=\E7:
-# From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
-aj510|Anderson-Jacobson model 510:\
-	:am:mi:\
-	:co#80:li#24:\
-	:al=2*\E&I:cd=\E'P:ce=\E'L:cl=^L:cm=\E#%+ %+ :dc=.1*\E'D:\
-	:dl=2*\E&D:ei=\E'J:ic=:im=\E'I:ip=.1*:kd=\EZ:kl=\EW:kr=\EX:\
-	:ku=\EY:le=^H:nd=\EX:pc=\177:se=\E"I:so=\E"I:te=\E"N:\
-	:ti=\E"N:ue=\E"U:up=\EY:us=\E"U:
-# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
-# This is incomplete, but it's a start.
-nec5520|nec|spinwriter|nec 5520:\
-	:hc:os:\
-	:co#132:it#8:\
-	:bl=^G:cr=^M:ct=\E3:do=^J:ff=^L:hd=\E]s\n\E]W:\
-	:hu=\E]s\E9\E]W:kb=^H:le=^H:sf=^J:st=\E1:ta=^I:up=\E9:
-qume5|qume|Qume Sprint 5:\
-	:hc:os:\
-	:co#80:it#8:\
-	:bl=^G:cr=^M:ct=\E3:do=^J:ff=^L:hd=\Eh:hu=\EH:kb=^H:le=^H:\
-	:sf=^J:st=\E1:ta=^I:up=^Z:
-# I suspect the xerox 1720 is the same as the diablo 1620.
-xerox1720|x1720|x1750|xerox 1720:\
-	:hc:os:\
-	:co#132:it#8:\
-	:bl=^G:cr=^M:ct=\E2:do=^J:ff=^L:le=^H:sf=^J:st=\E1:ta=^I:
-
-#### Miscellaneous obsolete terminals, manufacturers unknown
-#
-# If you have any information about these (like, a manufacturer's name,
-# and a date on the serial-number plate) please send it!
-
-cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars:\
-	:am:bs:\
-	:co#73:li#36:\
-	:cl=^Z:ho=^^:le=^H:nd=^L:up=^K:
-cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars:\
-	:am:bs:\
-	:co#85:li#39:\
-	:cl=^Z:ho=^^:k1=\E5:k2=\E6:k3=\E7:k4=\E8:kd=\E2:kl=\E3:\
-	:kr=\E4:ku=\E1:le=^H:nd=^L:se=\Em^C:so=\Em^L:up=^K:
-cops10|cops|cops-10|cops 10:\
-	:am:bw:\
-	:co#80:li#24:\
-	:bl=^G:cd=^W:ce=^V:cl=30\030:cm=\020%+ %+ :cr=^M:do=^J:\
-	:kb=^H:kd=^J:kh=^Y:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:sf=^J:up=^K:
-# (d132: removed duplicate :ic=\E5:,
-# merged in capabilities from a BRL entry -- esr)
-d132|datagraphix|datagraphix 132a:\
-	:da:db:in:\
-	:co#80:li#30:\
-	:al=\E3:bl=^G:cl=^L:cm=\E8%i%3%3:cr=^M:dc=\E6:do=^J:ei=:\
-	:ho=\ET:ic=\E5:im=:kb=^H:kd=^J:kl=^H:le=^H:nd=\EL:nw=^M^J:\
-	:sf=^J:sr=\Ew:ta=^I:up=\EK:ve=\Em\En:vs=\Ex:
-# The d800 was an early portable terminal from c.1984-85 that looked a lot
-# like the original Compaq `lunchbox' portable (but no handle).  It had a vt220
-# mode (which is what this entry looks like) and several other lesser-known
-# emulations.
-d800|Direct 800/A:\
-	:am:bs:da:db:ms:xs:\
-	:co#80:it#8:li#24:\
-	:ac=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~:\
-	:ae=\E[m:as=\E[1m:bl=^G:cd=\E[J:ce=\E[K:cl=\E[1;1H\E[2J:\
-	:cm=\E[%i%d;%dH:cr=^M:do=^J:k1=\EOP:k2=\EOQ:k3=\EOR:\
-	:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:kd=\E[B:kl=\E[D:\
-	:kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\E[C:se=\E[m:sf=\ED:\
-	:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[>12h:\
-	:vs=\E[>12l:
-digilog|digilog 333:\
-	:bs:\
-	:co#80:li#16:\
-	:bl=^G:ce=^X:cr=^M:do=^J:ho=^N:le=^H:nd=^I:sf=^J:up=^O:
-# The DWK was a terminal manufactured in the Soviet Union c.1986
-dwk|dwk-vt|dwk terminal:\
-	:am:\
-	:co#80:it#8:li#24:\
-	:ac=+^,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_:\
-	:ae=\EG:as=\EF:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :\
-	:cr=^M:dc=\EP:do=^J:ei=:ho=\EH:ic=\EQ:im=:k1=\Ef1:k2=\Ef2:\
-	:k3=\Ef3:k4=\Ef4:k5=\Ef5:k6=\Ef6:k7=\Ef7:k8=\Ef8:k9=\Ef9:\
-	:k;=\Ef0:kD=\Ee:kI=\Ed:kN=\Eh:kP=\Eg:kb=\177:kd=\EB:kl=\ED:\
-	:kr=\EC:ku=\EA:le=^H:me=\EX:mr=\ET:nd=\EC:nw=^M^J:se=\EX:\
-	:sf=^J:so=\ET:sr=\ES:ta=^I:up=\EA:
-env230|envision230|envision 230 graphics terminal:\
-	:xn@:\
-	:pf=\E[4i:po=\E[5i:ps=\E[0i:\
-	:..sa=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>:\
-	:tc=vt100:
-# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
-# coupler attached, the whole rig fitting in a suitcase and more or less
-# portable.  Hot stuff for c.1977 :-) -- esr
-ep48|ep4080|execuport 4080:\
-	:am:bs:os:\
-	:co#80:\
-	:bl=^G:cr=^M:do=^J:hd=^\:hu=^^:le=^H:sf=^J:
-ep40|ep4000|execuport 4000:\
-	:co#136:tc=ep4080:
-# Adam Thompson <athompso@pangea.ca> tells us:
-# Informer series - these are all portable units, resembling older
-# automatic bread-baking machines.  The terminal looks like a `clamshell'
-# design, but isn't.  The structure is similar to the Direct terminals,
-# but only half the width.  The entire unit is only about 10" wide.
-# It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
-# keyboard.  All the keys are crammed together, much like some laptop
-# PCs today, but perhaps less well organized...all these units have a
-# bewildering array of plugs on the back, including a built-in modem.
-# The 305 was a color version of the 304; the 306 and 307 were mono and
-# color terminals built for IBM bisync protocols.
-# From: Paul Leondis <unllab@amber.berkeley.edu>
-ifmr|Informer D304:\
-	:am:bs:\
-	:co#80:li#24:\
-	:cd=\E/:ce=\EQ:cl=\EZ:cm=\EY%r%+ %+ :dc=\E\\:do=^J:ei=:\
-	:ho=\EH:ic=\E[:im=:le=^H:me=\EK:nd=\EC:se=\EK:so=\EJ:sr=\En:\
-	:up=\EA:
-# Entry largely based on wy60 and has the features of wy60ak.
-# (untranslatable capabilities removed to fit entry within 1023 bytes)
-# (sgr removed to fit entry within 1023 bytes)
-# (acsc removed to fit entry within 1023 bytes)
-# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
-opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys:\
-	:am:bw:hs:km:mi:ms:ul:xo:\
-	:co#80:li#24:ws#80:\
-	:ae=\EH^C:al=\EE:as=\EH^B:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E*:\
-	:cm=\Ea%i%dR%dC:cr=^M:ct=\E0:dc=\EW:dl=\ER:do=^J:ds=\Ez(\r:\
-	:ei=\Er:fs=^M:ho=\036:if=/usr/share/tabset/std:im=\Eq:ip=:\
-	:is=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12:\
-	:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
-	:k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\EQ:kN=\EK:kP=\EJ:\
-	:kb=^H:kd=\E[B:kh=^^:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\EG2:\
-	:me=\E(\EH\003\EG0\EcD:mh=\EGp:nd=^L:nw=\r\n:sf=^J:sr=\Ej:\
-	:st=\E1:ta=\011:te=:\
-	:ti=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177:\
-	:ts=\Ez(:uc=\EG8\EG0:up=^K:ve=\E`1:vi=\E`0:tc=adm+sgr:
-teletec|Teletec Datascreen:\
-	:am:bs:\
-	:co#80:li#24:\
-	:bl=^G:cl=^L:cr=^M:do=^J:ho=^^:le=^H:nd=^_:sf=^J:up=^K:
-# From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
-# This description is for the LANPAR Technologies VISION 3220
-# terminal from 1984/85.  The function key definitions k0-k5 represent the
-# edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
-# NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
-#
-# Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
-# I had a couple of scopes (3221) like this once where I used to work, around
-# the 1987 time frame if memory serves me correctly.  These scopes were made
-# by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
-# compatible.  The 3220 was a plain text terminal like the VT-220, the 3221
-# was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
-# was like the VT-241 (color with Regis + Sixel Graphics).  These terminals
-# (3221) cost about $1500 each, and one was always broken -- had to be sent
-# back to the shop for repairs.
-# The only real advantage these scopes had over the VT-240's were:
-# 1) They were faster in the Regis display, or at least the ones I did
-# 2) They had a handy debugging feature where you could split-screen the
-# scope, the graphics would appear on the top, and the REGIS commands would
-# appear on the bottom.  I don't remember the VT-240s being able to do that.
-# I would swear that LANPAR Technologies was in MA someplace, but since I
-# don't work at the same place anymore, and those terminals and manuals were
-# long since junked, I cannot be any more sure than that.
-#
-# (v3220: removed obsolete ":kn#10:",
-# I added <rmam>/<smam> based on the init string -- esr)
-v3220|LANPAR Vision II model 3220/3221/3222:\
-	:am:bs:mi:xn:\
-	:co#80:it#8:li#24:\
-	:RA=\E[?7l:SA=\E[?7h:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
-	:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:ei=\E[4l:im=\E[4h:\
-	:is=\E>\E[?3l\E[?7h\E[?8h\E[p:k0=\E[1~:k1=\E[2~:\
-	:k2=\E[3~:k3=\E[4~:k4=\E[5~:k5=\E[6~:k6=\E[OP:k7=\E[OQ:\
-	:k8=\E[OR:k9=\E[OS:kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:kr=\E[C:\
-	:ks=\E=:ku=\E[A:le=^H:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:\
-	:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
-######## ICH/ICH1 VERSUS RMIR/SMIR
-#
-# Some non-curses applications get confused if both ich/ich1 and rmir/smir
-# are present; the symptom is doubled characters in an update using insert.
-# These applications are technically correct; in both 4.3BSD termcap and
-# terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
-# unless the terminal needs both.  To my knowledge, no terminal still in this
-# file requires both other than the very obsolete dm2500.
-#
-# For ncurses-based applications this is not a problem, as ncurses uses
-# one or the other as appropriate but never mixes the two.  Therefore we
-# have not corrected entries like `linux' and `xterm' that specify both.
-# If you see doubled characters from these, use the linux-nic and xterm-nic
-# entries that suppress ich/ich1.  And upgrade to ncurses!
-#
-
-######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
-#
-# ANSI X3.64 has been withdrawn and replaced by ECMA-48.  The ISO 6429 and
-# ECMA-48 standards are said to be almost identical, but are not the same
-# as X3.64 (though for practical purposes they are close supersets of it).
-#
-# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
-# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
-# Coded Character Sets"), include your snail-mail address, and you should
-# receive the document in due course.  Don't expect an email acknowledgement.
-#
-# Related standards include "X3.4-1977: American National Standard Code for
-# Information Interchange" (the ASCII standard) and "X3.41.1974:
-# Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
-# American National Standard for Information Interchange."  I believe (but
-# am not certain) that these are effectively identical to ECMA-6 and ECMA-35
-# respectively.
-#
-
-#### VT100/ANSI/ECMA-48
-#
-# ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
-# and ECMA-48 Control Functions for Coded Character Sets.
-#
-# Much of the content of this comment is adapted from a table prepared by
-# Richard Shuford, based on a 1984 Byte article.  Terminfo correspondences,
-# discussion of some terminfo-related issues, and updates to capture ECMA-48
-# have been added.  Control functions described in ECMA-48 only are tagged
-# with * after their names.
-#
-# The table is a complete list of the defined ANSI X3.64/ECMA-48 control
-# sequences.  In the main table, \E stands for an escape (\033) character,
-# SPC for space.  Pn stands for a single numeric parameter to be inserted
-# in decimal ASCII.  Ps stands for a list of such parameters separated by
-# semicolons.  Parameter meanings for most parametrized sequences are
-# decribed in the notes.
-#
-# Sequence     Sequence                             Parameter   or
-# Mnemonic     Name              Sequence           Value      Mode   terminfo
-# -----------------------------------------------------------------------------
-# APC  Applicatn Program Command \E _                -         Delim  -
-# BEL  Bell *                    ^G                  -         -      bel
-# BPH  Break Permitted Here *    \E B                -         *      -
-# BS   Backpace *                ^H                  -         EF     -
-# CAN  Cancel *                  ^X                  -         -      -   (A)
-# CBT  Cursor Backward Tab       \E [ Pn Z           1         eF     cbt
-# CCH  Cancel Previous Character \E T                -         -      -
-# CHA  Cursor Horizntal Absolute \E [ Pn G           1         eF     hpa (B)
-# CHT  Cursor Horizontal Tab     \E [ Pn I           1         eF     tab (C)
-# CMD  Coding Method Delimiter * \E
-# CNL  Cursor Next Line          \E [ Pn E           1         eF     nel (D)
-# CPL  Cursor Preceding Line     \E [ Pn F           1         eF     -
-# CPR  Cursor Position Report    \E [ Pn ; Pn R      1, 1      -      -   (E)
-# CSI  Control Sequence Intro    \E [                -         Intro  -
-# CTC  Cursor Tabulation Control \E [ Ps W           0         eF     -   (F)
-# CUB  Cursor Backward           \E [ Pn D           1         eF     cub
-# CUD  Cursor Down               \E [ Pn B           1         eF     cud
-# CUF  Cursor Forward            \E [ Pn C           1         eF     cuf
-# CUP  Cursor Position           \E [ Pn ; Pn H      1, 1      eF     cup (G)
-# CUU  Cursor Up                 \E [ Pn A           1         eF     cuu
-# CVT  Cursor Vertical Tab       \E [ Pn Y           -         eF     -   (H)
-# DA   Device Attributes         \E [ Pn c           0         -      -
-# DAQ  Define Area Qualification \E [ Ps o           0         -      -
-# DCH  Delete Character          \E [ Pn P           1         eF     dch
-# DCS  Device Control String     \E P                -         Delim  -
-# DL   Delete Line               \E [ Pn M           1         eF     dl
-# DLE  Data Link Escape *        ^P                  -         -      -
-# DMI  Disable Manual Input      \E \                -         Fs     -
-# DSR  Device Status Report      \E [ Ps n           0         -      -   (I)
-# DTA  Dimension Text Area *     \E [ Pn ; Pn SPC T  -         PC     -
-# EA   Erase in Area             \E [ Ps O           0         eF     -   (J)
-# ECH  Erase Character           \E [ Pn X           1         eF     ech
-# ED   Erase in Display          \E [ Ps J           0         eF     ed  (J)
-# EF   Erase in Field            \E [ Ps N           0         eF     -
-# EL   Erase in Line             \E [ Ps K           0         eF     el  (J)
-# EM   End of Medium *           ^Y                  -         -      -
-# EMI  Enable Manual Input       \E b                          Fs     -
-# ENQ  Enquire                   ^E                  -         -      -
-# EOT  End Of Transmission       ^D                  -         *      -
-# EPA  End of Protected Area     \E W                -         -      -   (K)
-# ESA  End of Selected Area      \E G                -         -      -
-# ESC  Escape                    ^[                  -         -      -
-# ETB  End Transmission Block    ^W                  -         -      -
-# ETX  End of Text               ^C                  -         -      -
-# FF   Form Feed                 ^L                  -         -      -
-# FNK  Function Key *            \E [ Pn SPC W       -         -      -
-# GCC  Graphic Char Combination* \E [ Pn ; Pn SPC B  -         -      -
-# FNT  Font Selection            \E [ Pn ; Pn SPC D  0, 0      FE     -
-# GSM  Graphic Size Modify       \E [ Pn ; Pn SPC B  100, 100  FE     -   (L)
-# GSS  Graphic Size Selection    \E [ Pn SPC C       none      FE     -
-# HPA  Horz Position Absolute    \E [ Pn `           1         FE     -   (B)
-# HPB  Char Position Backward    \E [ j              1         FE     -
-# HPR  Horz Position Relative    \E [ Pn a           1         FE     -   (M)
-# HT   Horizontal Tab *          ^I                  -         FE     -   (N)
-# HTJ  Horz Tab w/Justification  \E I                -         FE     -
-# HTS  Horizontal Tab Set        \E H                -         FE     hts
-# HVP  Horz & Vertical Position  \E [ Pn ; Pn f      1, 1      FE     -   (G)
-# ICH  Insert Character          \E [ Pn @           1         eF     ich
-# IDCS ID Device Control String  \E [ SPC O          -         *      -
-# IGS  ID Graphic Subrepertoire  \E [ SPC M          -         *      -
-# IL   Insert Line               \E [ Pn L           1         eF     il
-# IND  Index                     \E D                -         FE     -
-# INT  Interrupt                 \E a                -         Fs     -
-# JFY  Justify                   \E [ Ps SPC F       0         FE     -
-# IS1  Info Separator #1 *       ^_                  -         *      -
-# IS2  Info Separator #1 *       ^^                  -         *      -
-# IS3  Info Separator #1 *       ^]                  -         *      -
-# IS4  Info Separator #1 *       ^\                  -         *      -
-# LF   Line Feed                 ^J                  -         -      -
-# LS1R Locking Shift Right 1 *   \E ~                -         -      -
-# LS2  Locking Shift 2 *         \E n                -         -      -
-# LS2R Locking Shift Right 2 *   \E }                -         -      -
-# LS3  Locking Shift 3 *         \E o                -         -      -
-# LS3R Locking Shift Right 3 *   \E |                -         -      -
-# MC   Media Copy                \E [ Ps i           0         -      -   (S)
-# MW   Message Waiting           \E U                -         -      -
-# NAK  Negative Acknowledge *    ^U                  -         *      -
-# NBH  No Break Here *           \E C                -         -      -
-# NEL  Next Line                 \E E                -         FE     nel (D)
-# NP   Next Page                 \E [ Pn U           1         eF     -
-# NUL  Null *                    ^@                  -         -      -
-# OSC  Operating System Command  \E ]                -         Delim  -
-# PEC  Pres. Expand/Contract *   \E Pn SPC Z         0         -      -
-# PFS  Page Format Selection *   \E Pn SPC J         0         -      -
-# PLD  Partial Line Down         \E K                -         FE     -   (T)
-# PLU  Partial Line Up           \E L                -         FE     -   (U)
-# PM   Privacy Message           \E ^                -         Delim  -
-# PP   Preceding Page            \E [ Pn V           1         eF     -
-# PPA  Page Position Absolute *  \E [ Pn SPC P       1         FE     -
-# PPB  Page Position Backward *  \E [ Pn SPC R       1         FE     -
-# PPR  Page Position Forward *   \E [ Pn SPC Q       1         FE     -
-# PTX  Parallel Texts *          \E [ \              -         -      -
-# PU1  Private Use 1             \E Q                -         -      -
-# PU2  Private Use 2             \E R                -         -      -
-# QUAD Typographic Quadding      \E [ Ps SPC H       0         FE     -
-# REP  Repeat Char or Control    \E [ Pn b           1         -      rep
-# RI   Reverse Index             \E M                -         FE     -   (V)
-# RIS  Reset to Initial State    \E c                -         Fs     -
-# RM   Reset Mode *              \E [ Ps l           -         -      -   (W)
-# SACS Set Add. Char. Sep. *     \E [ Pn SPC /       0         -      -
-# SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ]       0         -      -   (X)
-# SCI  Single-Char Introducer    \E Z                -         -      -
-# SCO  Sel. Char. Orientation *  \E [ Pn ; Pn SPC k  -         -      -
-# SCS  Set Char. Spacing *       \E [ Pn SPC g       -         -      -
-# SD   Scroll Down               \E [ Pn T           1         eF     rin
-# SDS  Start Directed String *   \E [ Pn ]           1         -      -
-# SEE  Select Editing Extent     \E [ Ps Q           0         -      -   (Y)
-# SEF  Sheet Eject & Feed *      \E [ Ps ; Ps SPC Y  0,0       -      -
-# SGR  Select Graphic Rendition  \E [ Ps m           0         FE     sgr (O)
-# SHS  Select Char. Spacing *    \E [ Ps SPC K       0         -      -
-# SI   Shift In                  ^O                  -         -      -   (P)
-# SIMD Sel. Imp. Move Direct. *  \E [ Ps ^           -         -      -
-# SL   Scroll Left               \E [ Pn SPC @       1         eF     -
-# SLH  Set Line Home *           \E [ Pn SPC U       -         -      -
-# SLL  Set Line Limit *          \E [ Pn SPC V       -         -      -
-# SLS  Set Line Spacing *        \E [ Pn SPC h       -         -      -
-# SM   Select Mode               \E [ Ps h           none      -      -   (W)
-# SO   Shift Out                 ^N                  -         -      -   (Q)
-# SOH  Start Of Heading *        ^A                  -         -      -
-# SOS  Start of String *         \E X                -         -      -
-# SPA  Start of Protected Area   \E V                -         -      -   (Z)
-# SPD  Select Pres. Direction *  \E [ Ps ; Ps SPC S  0,0       -      -
-# SPH  Set Page Home *           \E [ Ps SPC G       -         -      -
-# SPI  Spacing Increment         \E [ Pn ; Pn SPC G  none      FE     -
-# SPL  Set Page Limit *          \E [ Ps SPC j       -         -      -
-# SPQR Set Pr. Qual. & Rapid. *  \E [ Ps SPC X       0         -      -
-# SR   Scroll Right              \E [ Pn SPC A       1         eF     -
-# SRCS Set Reduced Char. Sep. *  \E [ Pn SPC f       0         -      -
-# SRS  Start Reversed String *   \E [ Ps [           0         -      -
-# SSA  Start of Selected Area    \E F                -         -      -
-# SSU  Select Size Unit *        \E [ Pn SPC I       0         -      -
-# SSW  Set Space Width *         \E [ Pn SPC [       none      -      -
-# SS2  Single Shift 2 (G2 set)   \E N                -         Intro  -
-# SS3  Single Shift 3 (G3 set)   \E O                -         Intro  -
-# ST   String Terminator         \E \                -         Delim  -
-# STAB Selective Tabulation *    \E [ Pn SPC ^       -         -      -
-# STS  Set Transmit State        \E S                -         -      -
-# STX  Start pf Text *           ^B                  -         -      -
-# SU   Scroll Up                 \E [ Pn S           1         eF     indn
-# SUB  Substitute *              ^Z                  -         -      -
-# SVS  Select Line Spacing *     \E [ Pn SPC \       1         -      -
-# SYN  Synchronous Idle *        ^F                  -         -      -
-# TAC  Tabul. Aligned Centered * \E [ Pn SPC b       -         -      -
-# TALE Tabul. Al. Leading Edge * \E [ Pn SPC a       -         -      -
-# TATE Tabul. Al. Trailing Edge* \E [ Pn SPC `       -         -      -
-# TBC  Tab Clear                 \E [ Ps g           0         FE     tbc
-# TCC  Tabul. Centered on Char * \E [ Pn SPC c       -         -      -
-# TSR  Tabulation Stop Remove  * \E [ Pn SPC d       -         FE     -
-# TSS  Thin Space Specification  \E [ Pn SC E        none      FE     -
-# VPA  Vert. Position Absolute   \E [ Pn d           1         FE     vpa
-# VPB  Line Position Backward *  \E [ Pn k           1         FE     -
-# VPR  Vert. Position Relative   \E [ Pn e           1         FE     -   (R)
-# VT   Vertical Tabulation *     ^K                  -         FE     -
-# VTS  Vertical Tabulation Set   \E J                -         FE     -
-#
-# ---------------------------------------------------------------------------
-#
-# Notes:
-#
-# Some control characters are listed in the ECMA-48 standard without
-# being assigned functions relevant to terminal control there (they
-# referred to other standards such as ISO 1745 or ECMA-35).  They are listed
-# here anyway for completeness.
-#
-# (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
-#
-# (B) There seems to be some confusion abroad between CHA and HPA.  Most
-# `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
-# the capability (hpa).  ECMA-48 calls this "Cursor Character Absolute" but
-# preserved the CHA abbreviation.
-#
-# (C) CHT corresponds to terminfo (tab).  Usually it has the value ^I.
-# Occasionally (as on, for example, certain HP terminals) this has the HTJ
-# value.  ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
-# CHT abbreviation.
-#
-# (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
-#
-# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
-# abbreviation.
-#
-# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
-# char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
-# 5 = clear all char tabs, 6 = clear all line tabs.
-#
-# (G) CUP and HVP are identical in effect.  Some ANSI.SYS versions accept
-# HVP, but always allow CUP as an alternate.  ECMA-48 calls HVP "Character
-# Position Absolute" but retains the HVP abbreviation.
-#
-# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
-# abbreviation.
-#
-# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
-# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
-# DSR, 6 = request CPR response.
-#
-# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
-# 1 = clear from beginning, 2 = clear.
-#
-# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
-#
-# (L) The GSM parameters are vertical and horizontal parameters to scale by.
-#
-# (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
-# use CUF for this function and ignore HPR.  ECMA-48 calls this "Character
-# Position Relative" but retains the HPR abbreviation.
-#
-# (N) ECMA-48 calls this "Character Tabulation" but retains the HT
-# abbreviation.
-#
-# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
-# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
-# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
-# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
-# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
-# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
-# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
-# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
-# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
-# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
-# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
-# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
-# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
-# 61-65 = variable highlights for ideograms.
-#
-# (P) SI is also called LSO, Locking Shift Zero.
-#
-# (Q) SI is also called LS1, Locking Shift One.
-#
-# (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
-# use CUD for this function and ignore VPR.  ECMA calls it `Line Position
-# Absolute' but retains the VPA abbreviation.
-#
-# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
-# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
-# from secondary aux device, 4 = stop relay to primary aux device, 5 =
-# start relay to primary aux device, 6 = stop relay to secondary aux device,
-# 7 = start relay to secondary aux device.
-#
-# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
-# abbreviation.
-#
-# (U) ECMA-48 calls this "Partial Line Backward" but retains the PLD
-# abbreviation.
-#
-# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
-#
-# (W) RM/SM modes are as follows: 1 = Guarder Area Transfer Mode (GATM),
-# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
-# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
-# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
-# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
-# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
-# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
-# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
-# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
-# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
-# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
-# Zero Default Mode (ZDM).  The EBM and LF/NL modes have actually been removed
-# from ECMA-48's 5th edition but are listed here for reference.
-#
-# (X) Select Alternate Presentation Variants is used only for non-Latin
-# alphabets.
-#
-# (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
-#
-# (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
-# abbreviation.
-#
-# ---------------------------------------------------------------------------
-#
-# Abbreviations:
-#
-# Intro  an Introducer of some kind of defined sequence; the normal 7-bit
-#        X3.64 Control Sequence Introducer is the two characters "Escape ["
-#
-# Delim  a Delimiter
-#
-# x/y    identifies a character by position in the ASCII table (column/row)
-#
-# eF     editor function (see explanation)
-#
-# FE     format effector (see explanation)
-#
-# F      is a Final character in
-#             an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
-#             a control sequence (F from 4/0 to 7/14)
-#
-# Gs     is a graphic character appearing in strings (Gs ranges from
-#        2/0 to 7/14) in the ASCII table
-#
-# Ce     is a control represented as a single bit combination in the C1 set
-#        of controls in an 8-bit character set
-#
-# C0     the familiar set of 7-bit ASCII control characters
-#
-# C1     roughly, the set of control chars available only in 8-bit systems.
-#        This is too complicated to explain fully here, so read Jim Fleming's
-#        article in the February 1983 BYTE, especially pages 214 through 224.
-#
-# Fe     is a Final character of a 2-character Escape sequence that has an
-#        equivalent representation in an 8-bit environment as a Ce-type
-#        (Fe ranges from 4/0 to 5/15)
-#
-# Fs     is a Final character of a 2-character Escape sequence that is
-#        standardized internationally with identical representation in 7-bit
-#        and 8-bit environments and is independent of the currently
-#        designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
-#
-# I      is an Intermediate character from 2/0 to 2/15 (inclusive) in the
-#        ASCII table
-#
-# P      is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
-#        table
-#
-# Pn     is a numeric parameter in a control sequence, a string of zero or
-#        more characters ranging from 3/0 to 3/9 in the ASCII table
-#
-# Ps     is a variable number of selective parameters in a control sequence
-#        with each selective parameter separated from the other by the code
-#        3/11 (which usually represents a semicolon); Ps ranges from
-#        3/0 to 3/9 and includes 3/11
-#
-# *      Not relevant to terminal control, listed for completeness only.
-#
-# Format Effectors versus Editor Functions
-#
-# A format effector specifies how following output is to be displayed.
-# An editor function allows you to modify the display.  Informally
-# format effectors may be destructive; format effectors should not be.
-#
-# For instance, a format effector that moves the "active position" (the
-# cursor or equivalent) one space to the left would be useful when you want to
-# create an overstrike, a compound character made of two standard characters
-# overlaid. Control-H, the Backspace character, is actually supposed to be a
-# format effector, so you can do this. But many systems use it in a
-# nonstandard fashion, as an editor function, deleting the character to the
-# left of the cursor and moving the cursor left. When Control-H is assumed to
-# be an editor function, you cannot predict whether its use will create an
-# overstrike unless you also know whether the output device is in an "insert
-# mode" or an "overwrite mode". When Control-H is used as a format effector,
-# its effect can always be predicted. The familiar characters carriage
-# return, linefeed, formfeed, etc., are defined as format effectors.
-#
-# NOTES ON THE DEC VT100 IMPLEMENTATION
-#
-# Control sequences implemented in the VT100 are as follows:
-#
-#      CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
-#      LNM, NEL, RI, RIS, RM, SGR, SM, TBC
-#
-# plus several private DEC commands.
-#
-# Erasing parts of the display (EL and ED) in the VT100 is performed thus:
-#
-#      Erase from cursor to end of line           Esc [ 0 K    or Esc [ K
-#      Erase from beginning of line to cursor     Esc [ 1 K
-#      Erase line containing cursor               Esc [ 2 K
-#      Erase from cursor to end of screen         Esc [ 0 J    or Esc [ J
-#      Erase from beginning of screen to cursor   Esc [ 1 J
-#      Erase entire screen                        Esc [ 2 J
-#
-# Some brain-damaged terminal/emulators respond to Esc [ J as if it were
-# Esc [ 2 J, but this is wrong; the default is 0.
-#
-# The VT100 responds to receiving the DA (Device Attributes) control
-#
-#      Esc [ c    (or Esc [ 0 c)
-#
-# by transmitting the sequence
-#
-#      Esc [ ? l ; Ps c
-#
-# where Ps is a character that describes installed options.
-#
-# The VT100's cursor location can be read with the DSR (Device Status
-# Report) control
-#
-#      Esc [ 6 n
-#
-# The VT100 reports by transmitting the CPR sequence
-#
-#      Esc [ Pl ; Pc R
-#
-# where Pl is the line number and Pc is the column number (in decimal).
-#
-# The specification for the DEC VT100 is document EK-VT100-UG-003.
-
-#### ANSI.SYS
-#
-# Here is a description of the color and attribute controls supported in the
-# the ANSI.SYS driver under MS-DOS.  Most console drivers and ANSI
-# terminal emulators for Intel boxes obey these.  They are a proper subset
-# of the ECMA-48 escapes.
-#
-# 0	all attributes off
-# 1	foreground bright
-# 4	underscore on
-# 5	blink on/background bright (not reliable with brown)
-# 7	reverse-video
-# 8	set blank (non-display)
-# 10	set primary font
-# 11	set first alternate font (on PCs, display ROM characters 1-31)
-# 12	set second alternate font (on PCs, display IBM high-half chars)
-#
-#			Color attribute sets
-# 3n	set foreground color       / 0=black, 1=red,     2=green, 3=brown,
-# 4n	set background color       \ 4=blue,  5=magenta, 6=cyan,  7=white
-# Bright black becomes gray.  Bright brown becomes yellow,
-# These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
-#
-# * If the 5 attribute is on and you set a background color (40-47) it is
-#   supposed to enable bright background.
-#
-# * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
-#   when you try to set a "bright brown" (yellow) background with attribute
-#   5 (you get a blinking yellow foreground instead).  A few displays
-#   (including the System V console) support an attribute 6 that undoes this
-#   braindamage (this is required by iBCS2).
-#
-# * Some older versions of ANSI.SYS have a bug that causes thems to require
-#   ESC [ Pn k as EL rather than the ANSI ESC [ Pn K.  (This is not ECMA-48
-#   compatible.)
-
-#### Intel Binary Compatibility Standard
-#
-# For comparison, here are the capabilities implied by the Intel Binary
-# Compatibility Standard for UNIX systems (Intel order number 468366-001).
-# These recommendations are optional.  IBCS2 allows the leading escape to
-# be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
-# the ANSI X.364/ISO 6429/ECMA-48 standard.  Here are the iBCS2 capabilities
-# (as described in figure 9-3 of the standard).  Those expressed in the ibcs2
-# terminfo entry are followed with the corresponding capability in parens:
-#
-#	CSI <n>k		disable (n=0) or enable (n=1) keyclick
-#	CSI 2h   		lock keyboard
-#	CSI 2i  		send screen as input
-#	CSI 2l  		unlock keyboard
-#	CSI 6m  		enable background color intensity
-#	CSI <0-2>c		reserved
-#	CSI <0-59>m		select graphic rendition
-#	CSI <n>;<m>H	(cup)	cursor to line n and column m
-#	CSI <n>;<m>f		cursor to line n and column m
-#	CSI <n>@	(ich)	insert characters
-#	CSI <n>A	(cuu)	cursor up n lines
-#	CSI <n>B	(cud)	cursor down n lines
-#	CSI <n>C	(cuu)	cursor right n characters
-#	CSI <n>D	(cud)	cursor left n characters
-#	CSI <n>E		cursor down n lines and in first column
-#	CSI <n>F		cursor up n lines and in first column
-#	CSI <n>G	(hpa)	position cursor at column n-1
-#	CSI <n>J	(ed)	erase in display
-#	CSI <n>K	(el)	erase in line
-#	CSI <n>L	(il)	insert line(s)
-#	CSI <n>P	(dch)	delete characters
-#	CSI <n>S	(indn)	scroll up n lines
-#	CSI <n>T	(rin)	scroll down n lines
-#	CSI <n>X	(ech)	erase characters
-#	CSI <n>Z	(cbt)	back up n tab stops
-#	CSI <n>`		cursor to column n on line
-#	CSI <n>a	(cuu)	cursor right n characters
-#	CSI <n>d	(vpa)	cursor to line n
-#	CSI <n>e		cursor down n lines and in first column
-#	CSI <n>g	(cbt)	clear all tabs
-#	CSI <n>z		make virtual terminal n active
-#	CSI ?7h 	(smam)	turn automargin on
-#	CSI ?7l 	(rmam)	turn automargin off
-#	CSI s     		save cursor position
-#	CSI u   		restore cursor position to saved value
-#	CSI =<c>A		set overscan color
-#	CSI =<c>F		set normal foreground color
-#	CSI =<c>G		set normal background color
-#	CSI =<c>H		set reverse foreground color
-#	CSI =<c>I		set reverse foreground color
-#	CSI =<c>J		set graphic foreground color
-#	CSI =<c>K		set graphic foreground color
-#	CSI =<n>g	(dispc) display n from alternate graphics character set
-#	CSI =<p>;<d>B		set bell parameters
-#	CSI =<s>;<e>C		set cursor parameters
-#	CSI =<x>D		enable/disable intensity of background color
-#	CSI =<x>E		set/clear blink vs. bold background
-#	CSI 7     	(sc)	(sc) save cursor position
-#	CSI 8   	(rc)	(rc) restore cursor position to saved value
-#	CSI H		(hts)	(hts) set tab stop
-#	CSI Q<n><string>	define function key string
-#				(string must begin and end with delimiter char)
-#	CSI c   	(clear) clear screen
-#
-# The lack of any specification for attributes in SGR (among other things)
-# makes this a wretchedly weak standard. The table above is literally
-# everything iBSC2 has to say about terminal escape sequences; there is
-# no further discussion of their meaning or how to set the parameters
-# in these sequences at all.
-#
-
-######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
-#
-# The historical termcap file entries were written primarily in 4.4BSD termcap.
-# The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
-# with the extension names chosen for compatibility with the termcap names
-# assigned in System V terminfo.  There are some variant extension sets out
-# there.  We try to describe them here.
-#
-# XENIX extensions:
-#
-# The XENIX extensions include a set of function-key capabilities as follows:
-#
-#       code	XENIX variable name	terminfo name	name clashes?
-#	----	-------------------	-------------	-----------------------
-#	CL	key_char_left
-#	CR	key_char_right
-#	CW	key_change_window			create_window
-#	EN	key_end          	kend
-#	HM	key_home		khome
-#	HP	??
-#	LD	key_delete_line  	kdl1
-#	LF	key_linefeed     			label_off
-#	NU	key_next_unlocked_cell
-#	PD	key_page_down   	knp
-#	PL	??
-#	PN	start_print		mc5
-#	PR	??
-#	PS	stop_print		mc4
-#	PU	key_page_up     	kpp		pulse
-#	RC	key_recalc				remove_clock
-#	RF	key_toggle_ref				req_for_input
-#	RT	key_return      	kent
-#	UP	key_up_arrow           	kcuu1   	parm_up_cursor
-#	WL	key_word_left
-#	WR	key_word_right
-#
-# The XENIX extensions also include the following character-set and highlight
-# capabilities:
-#
-#	XENIX	terminfo	function
-#	-----	--------	------------------------------
-#	GS	smacs		start alternate character set
-#	GE	rmacs		end alternate character set
-#	GG			:as:/:ae: glitch (analogous to :sg:/:ug:)
-#	bo	blink		begin blink (not used in /etc/termcap)
-#	be			end blink (not used in /etc/termcap)
-#	bb			blink glitch  (not used in /etc/termcap)
-#	it	dim		begin dim (not used in /etc/termcap)
-#	ie			end dim (not used in /etc/termcap)
-#	ig			dim glitch  (not used in /etc/termcap)
-#
-# Finally, XENIX also used the following forms-drawing capabilities:
-#
-#	single	double  type             ASCII approximation
-#	------	------	-------------    -------------------
-#	GV	Gv	vertical line             |
-#	GH	Gv	horizontal line       -   _
-#	G1	G5	top right corner       _   |
-#	G2	G6	top left corner       |
-#	G3	G7	bottom left corner         |_
-#	G4	G8	bottom right corner   _|
-#	GD	Gd	down-tick character        T
-#	GL	Gl	left-tick character   -|
-#	GR	Gr	right-tick character       |-
-#	GC	Gc	middle intersection   -|-
-#	GU	Gu	up-tick character          _|_
-#
-# These were invented to take advantage of the IBM PC ROM character set.  One
-# can compose an acsc string from the single-width characters as follows
-#	"j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
-# When translating a termcap file, ncurses tic will do this automatically.
-# The double forms characters don't fit the SVr4 terminfo model.
-#
-# AT&T Extensions:
-#
-# The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
-# nonstandard capabilities.  Its signature is the KM capability, used to name
-# some sort of keymap file.  EE, BO, CI, CV, XS, DS, FL and FE are in this
-# set.  Comments in the original, and a little cross-checking with other AT&T
-# documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
-# (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
-# FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
-# cursor invisible), and CV=:ve: (make cursor normal).
-#
-# HP Extensions
-#
-# The HP library (as of mid-1995, their term.h file version 70.1) appears to
-# have the System V capabilities up to SVr1 level.  After that, it supports
-# two nonstandard caps meml and memu corresponding to the old termcap :ml:,
-# :mu: capabilities.  After that, it supports caps plab_norm, label_on,
-# label_off, and key_f11..key_f63 capabilities like SVr4's.  This makes the
-# HP binary format incompatible with SVr4's.
-#
-# IBM Extensions
-#
-# There is a set of nonstandard terminfos used by IBM's AIX operating system.
-# The AIX terminfo library diverged from SVr1 terminfo, and replaces all
-# capabilities following prtr_non with the following special capabilties:
-# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
-# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
-# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
-# rvert, lvert.   Some of these are identical to XPG4/SVr4 equivalents:
-# kcmd, kend, khlp, and kf11...kf63.  Two others (kbtab and ksel) can be
-# renamed (to kcbt and kslt).  The places in the box[12] capabilities
-# correspond to acsc chars, here is the mapping:
-#
-#	box1[0]  = ACS_ULCORNER
-#	box1[1]  = ACS_HLINE
-#	box1[2]  = ACS_URCORNER
-#	box1[3]  = ACS_VLINE
-#	box1[4]  = ACS_LRCORNER
-#	box1[5]  = ACS_LLCORNER
-#	box1[6]  = ACS_TTEE
-#	box1[7]  = ACS_RTEE
-#	box1[8]  = ACS_BTEE
-#	box1[9]  = ACS_LTEE
-#	box1[10] = ACS_PLUS
-#
-# The box2 characters are the double-line versions of these forms graphics.
-# The AIX binary terminfo format is incompatible with SVr4's.
-#
-# Iris console extensions:
-#
-# HS is half-intensity start; HE is half-intensity end
-# CT is color terminal type (for Curses & rogue)
-# CP is color change escape sequence
-# CZ are color names (for Curses & rogue)
-#
-# The ncurses tic utility recognizes HS as an alias for mh <dim>.
-#
-# TC Extensions:
-#
-# There is a set of extended termcaps associated with something
-# called the "Terminal Control" or TC package created by MainStream Systems,
-# Winfield Kansas.  This one also uses GS/GE for as/ae, and also uses
-# CF for civis and CO for cvvis.  Finally, they define a boolean :ct:
-# that flags color terminals.
-#
-######## CHANGE HISTORY
-#
-# The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
-# Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
-# project.
-#
-# This file contains all the capability information present in John Kunze's
-# last version of the termcap master file, except as noted in the change
-# comments at end of file.  Some information about very ancient obsolete
-# capabilities has been moved to comments.  Some all-numeric names of older
-# terminals have been retired.
-#
-# I changed :MT: to :km: (the 4.4BSD name) everywhere.  I commented out some
-# capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
-# used by BSD curses.
-#
-# The 9.1.0 version of this file was translated from my lightly-edited copy of
-# 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
-# the purpose.  Unless the ncurses tic implementation and the Lisp code were
-# making perfectly synchronized mistakes which I then failed to catch by
-# eyeball, the translation was correct and perfectly information-preserving.
-#
-# Major version number bumps correspond to major version changes in ncurses.
-#
-# Here is a log of the changes since then:
-#
-# 9.1.0 (Wed Feb  1 04:50:32 EST 1995):
-#	* First terminfo master translated from 8.3.
-# 9.2.0 (Wed Feb  1 12:21:45 EST 1995):
-#	* Replaced Wyse entries with updated entries supplied by vendor.
-#
-# 9.3.0 (Mon Feb  6 19:14:40 EST 1995):
-#	* Added contact & status info from G. Clark Brown <clark@sssi.com>.
-# 9.3.1 (Tue Feb  7 12:00:24 EST 1995):
-#	* Better XENIX keycap translation.  Describe TC termcaps.
-#	* Contact and history info supplied by Qume.
-# 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
-#	* Raided the Shuford FTP site for recent termcaps/terminfos.
-#	* Added information on X3.64 and VT100 standard escape sequences.
-# 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
-#	* Added a correct X11R6 xterm entry.
-#	* Fixed terminfo translations of padding.
-# 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
-#	* Added correct acsc/smacs/rmacs strings for vt100 and xterm.
-#	* Added u6/u7/u8/u9 capabilities.
-#	* Added PCVT entry.
-# 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
-#	* Emacs uses :so:, not :mr:, for its mode line.  Fix linux entry
-#	  to use reverse-video standout so Emacs will look right.
-#	* Added el1 capability to ansi.
-#	* Added smacs/rmacs to ansi.sys.
-#
-# 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
-#	* New mt70 entry.
-#	* Added COPYRIGHTS AND OTHER DELUSIONS.
-#	* Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
-#	  smartvid & smarterm, ampex 175 & 219 & 232,
-#	  env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
-#	  ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
-#	  screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
-#	  adm36, mime314, ergo4000, ca22851.  Replaced att7300, esprit, dd5500.
-#	* Replaced the Perkin-Elmer entries with vendor's official ones.
-#	* Restored the old minimal-ansi entry, luna needs it.
-#	* Fixed some incorrect ip and proportional-padding translations.
-# 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
-#	* Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
-#	* Make the xterm entry 65 lines again; create xterm25 and xterm24
-#	  to force a particular height.
-#	* Added beehive4 and reorganized other Harris entries.
-# 9.4.2 (Thu Mar  9 01:45:44 EST 1995):
-#	* Merged in DEC's official entries for its terminals.  The only old
-#	  entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
-#	* Replaced the translated BBN Bitgraph entries with purpose-built
-#	  ones from AT&T's SVr3.
-#	* Replaced the AT&T entries with AT&T's official terminfos.
-#	* Added teleray 16, vc415, cops10.
-#	* Merged in many individual capabilities from SCO terminfo files.
-# 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
-#	* Typo fixes.
-#	* Change linux entry so A_PROTECT enables IBM-PC ROM characters.
-# 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
-#	* Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
-#	  pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
-#	  simterm, citoh and variants.
-#	* Replaced sol entry with sol1 and sol2.
-#	* Replaced Qume QVT and Freedom-series entries with purpose-built
-#	  terminfo entries.
-#	* Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
-#	  and dg200 entries using caps from from SCO.
-#	* Added the usual set of function-key mappings to ANSI entry.
-#	* Corrected xterm's function-key capabilities.
-# 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
-#	* Fix in xterm entry, cub and cud are not reliable under X11R6.
-# 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
-#	* Fix in xterm entry, get the arrow keys right.
-#	* Change some \0 escapes to \200.
-# 9.4.7 (Tue Apr  4 11:27:11 EDT 1995)
-#	* Added apple (Videx card), adm1a, oadm31.
-#	* Fixed malformed ampex csr.
-#	* Fixed act4, cyb110; they had old-style prefix padding left in.
-#	* Changed mandatory to advisory padding in many entries.
-#	* Replaced HP entries up to hpsub with purpose-built ones.
-#	* Blank rmir/smir/rmdc/smdc capabilities removed.
-#	* Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
-# 9.4.8 (Fri Apr  7 09:36:34 EDT 199):
-#	* Replaced the Ann Arbor entries with SCO's, the init strings are
-#	  more efficient (but the entries otherwise identical).
-#	* Added dg211 from Shuford archive.
-#	* Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
-#	  adm42-nl, pc52, gs6300, xerox820, uts30.
-#	* Pull SCO's padding into vi200 entry.
-#	* Improved capabilities for tvi4107 and other Televideo and Viewpoint
-#	  entries merged in from SCO's descriptions.
-#	* Fixed old-style prefix padding on zen50, h1500.
-#	* Moved old superbee entry to superbee-xsb, pulled in new superbee
-#	  entry from SCO's description.
-#	* Reorganized the special entries.
-#	* Added lm#0 to cbunix and virtual entries.
-#
-# 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
-#	* Restored cdc456tst.
-#	* Fixed sb1 entry, SCO erroneously left out the xsb glitch.
-#	* Added megatek, beacon, microkit.
-#	* Freeze for ncurses-1.9 release.
-# 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
-#	* Added historical data for TAB.
-#	* Comment fixes from David MacKenzie.
-#	* Added the new BSDI pc3 entry.
-# 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
-#	* A change in the tic -C logic now ensures that all entries in
-#	  the termcap translation will fit in < 1024 bytes.
-#	* Added `bobcat' and `gator' HP consoles and the Nu machine entries
-#	  from GNU termcap file.  This merges in all their local information.
-# 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
-#	* Changed tic -C logic to dump all capabilities used by GNU termcap.
-#	* Added warnings about entries with long translations (restoring
-#	  all the GNU termcaps pushes a few over the edge).
-# 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
-#	* Yet another tic change, and a couple of entry tweaks, to reduce the
-#	  number of long (> 1024) termcap translations back to 0.
-#
-# 9.6.0 (Mon May  1 10:35:54 EDT 1995)
-#	* Added kf13-kf20 to Linux entry.
-#	* Regularize Prime terminal names.
-#	* Historical data on Synertek.
-#	* Freeze for ncurses-1.9.1.
-# 9.6.1 (Sat May  6 02:00:52 EDT 1995):
-#	* Added true xterm-color entry, renamed djm's pseudo-color entry.
-#	* Eliminate whitespace in short name fields, this tanks some scripts.
-#	* Name field changes to shorten some long entries.
-#	* Termcap translation now automatically generates empty rmir/smir
-#	  when ich1/ich is present (copes with an ancient vi bug).
-#	* Added `screen' entries from FSF's screen-3.6.2.
-#	* Added linux-nic and xterm-nic entries.
-# 9.6.2 (Sat May  6 17:00:55 EDT 1995):
-#	* Change linux entry to use smacs=\E[11m and have an explicit acsc,
-#	  eliminating some special-case code in ncurses.
-#
-# 9.7.0 (Tue May  9 18:03:12 EDT 1995):
-#	* Added vt320-k3, rsvidtx from the Emacs termcap.dat file.  I think
-#	  that captures everything unique from it.
-#	* Added reorder script generator.
-#	* Freeze for ncurses 1.9.2 release.
-# 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
-#	* Added Sean Farley's kspd, flash, rs1 capabilities for linux.
-#	* Added Olaf Siebert's corrections for adm12.
-#	* ansi-pc-color now includes the colors and pairs caps, so that
-#	  entries which use it will inherit them automatically.
-#	* The linux entry can now recognize the center (keypad 5) key.
-#	* Removed some junk that found its way into Linux acsc.
-#
-# 9.8.0 (Fri Jul  7 04:46:57 EDT 1995):
-#	* Add 50% cut mark as a desperate hack to reduce tic's core usage.
-#	* xterm doesn't try to use application keypad mode any more.
-#	* Freeze for ncurses-1.9.3 release.
-# 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
-#	* Added corrected sun entry from vendor.
-#	* Added csr capability to linux entry.
-#	* Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
-#	* Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
-#	* Some commented-out caps in long entries come back in, my code
-#	  for computing string-table lengths had a bug in it.
-#	* pcansi series modified to fit comm-program reality better.
-# 9.8.2 (Sat Sep  9 23:35:00 EDT 1995):
-#	* BSD/OS actually ships the ibmpc3 bold entry as its console.
-#	* Correct some bad aliases in the pcansi series
-#	* Added entry for QNX console.
-#	* Clean up duplicate long names for use with 4.4 library.
-#	* Change vt100 standout to be normal reverse vide, not bright reverse;
-#	  this makes the Emacs status line look better.
-# 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
-#	* Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
-#	* Minor surgery, mostly on name strings, to shorten termcap version.
-#
-# 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
-#	* Added dec-vt100 for use with the EWAN emulator.
-#	* Added kmous to xterm for use with xterm's mouse-tracking facility.
-#	* Freeze for 1.9.5 alpha release.
-# 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
-#	* Changed xterm lines to 24, the X11R6 default.
-# 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
-#	* Added 7 newly discovered, undocumented acsc characters to linux
-#	  entry (the pryz{|} characters).
-#	* ncurses no longer steals A_PROTECT.  Simplify linux sgr accordingly.
-#	* Correct two typos in the xterm entries introduced in 9.9.1.
-#	* I finally figured out how to translate ko capabilities.  Done.
-#	* Added tvi921 entries from Tim Theisen.
-#	* Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
-#	* Removed mystery tec entry, it was neither interesting nor useful.
-#	* shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
-#	  vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
-#	  trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
-#	  by making them relative to use capabilities
-#	* Added cuf1=^L to tvi925 from deleted variant tvi925a.
-#	* fixed cup in adm22 entry and parametrized strings in vt320-k3.
-#	* added it#8 to entries that used to have :pt: -- tvi912, vi200,
-#	  ampex80,
-#	* Translate all home=\E[;H capabilities to home=\E[H, they're
-#	  equivalent.
-#	* Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
-#	  vt100 and ANSI-like terminals.
-# 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
-#	* Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
-#	  does this now, too.
-#	* fviewpoint is gone, it duplicated screwpoint.
-#	* Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
-#	  ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
-#	  versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
-#	  The UW vi50 replaces the old one, which becomes vi50adm,
-#	* No more embedded commas in name fields.
-#
-# 9.10.0 (Wed Oct  4 15:39:37 EDT 1995):
-#	* XENIX forms characters in fos, trs16, scoansi become acsc strings,
-#	* Introduced klone+* entries for describing Intel-console behavior.
-#	* Linux kbs is default-mapped to delete for some brain-dead reason.
-#	* -nsl -> -ns.  The -pp syntax is obsolete.
-#	* Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
-#	* Make xterm entry do application-keypad mode again.  I got complaints
-#	  that it was messing up someone's 3270 emulator.
-#	* Added some longname fields in order to avoid warning messages from
-#	  older tic implementations.
-#	* According to ctlseqs.ms, xterm has a full vt100 graphics set.  Use
-#	  it! (This gives us pi, greater than, less than, and a few more.)
-#	* Freeze for ncurses-1.9.6 release.
-# 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
-#	* Add xon to a number of console entries, they're memory-mapped and
-#	  don't need padding.
-#	* Correct the use dependencies in the ansi series.
-#	* Hand-translate more XENIX capabilities.
-#	* Added hpterm entry for HP's X terminal emulator.
-#	* Added aixterm entries.
-#	* Shortened four names so everything fits in 14 chars.
-#
-# 9.11.0 (Thu Nov  2 17:29:35 EST 1995):
-#	* Added ibcs2 entry and info on iBCS2 standard.
-#	* Corrected hpa/vpa in linux entry.  They still fail the worm test.
-#	* We can handle the HP meml/memu capability now.
-#	* Added smacs to klone entries, just as documentation.
-#	* Carrected ansi.sys and cit-500 entries.
-#	* Added z39, vt320-k311, v220c, and avatar entries.
-#	* Make pcansi use the ansi.sys invis capability.
-#	* Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
-#	  tvi925, tvi950, dt80, ncr7900i, h19.
-#	* X3.64 has been withdrawn, change some references.
-#	* Removed function keys from ansi-m entry.
-#	* Corrected ansi.sys entry.
-#	* Freeze for ncurses-1.9.7 release.
-# 9.11.1 (Tue Nov  6 18:18:38 EST 1995):
-#	* Added rmam/smam capabilities to many entries based on init strings.
-#	* Added correct hpa/vpa to linux.
-#	* Reduced several entries relative to vt52.
-# 9.11.2 (Tue Nov  7 00:21:06 EST 1995):
-#	* Exiled some utterly unidentifiable custom and homebrew types to the
-#	  UFO file; also, obsolete small-screen hardware; also, entries which
-#	  look flat-out incorrect, garbled, or redundant.  These include the
-#	  following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
-#	  tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
-#	  apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
-#	  fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
-#	  yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
-#	  vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
-#	  trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
-#	  att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
-#	  tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
-#	  c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
-#	  regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
-#	  vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
-#	  vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
-#	* Corrected pcvt25h as suggested by Brian C. Grayson
-#	  <bgrayson@pine.ece.utexas.edu>.
-# 9.11.3 (Thu Nov  9 12:14:40 EST 1995):
-#	* Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
-#	* Added kent=\EOM to xterm entry.
-#
-# 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
-#	* Corrected gigi entry.
-#	* Restored cuf/cud1 to xterm, their apparent bugginess was due to
-#	  bad hpa/vpa capabilities.
-#	* Corrected flash strings to have a uniform delay of .2 sec.  No
-#	  more speed-dependent NUL-padding!
-#	* terminfo capabilities in comments bracketed with <>.
-# 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
-#	* Replaced pcvt with the 3.31 pcvt entries.
-#	* Freeze for 1.9.7a.
-# 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
-#	* Added emu entry from the X11R6 contrib tape sources.
-#
-# 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
-#	* Improved iris-ansi and sun entries.
-#	* More flash string improvements.
-#	* Corrected wy160 & wy160 as suggested by Robert Dunn
-#	* Added dim to at386.
-#	* Reconciled pc3 and ibmpc3 with the BSDI termcap file.  Keith says
-#	  he's ready to start using the termcap generated from this one.
-#	* Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
-#	  ln03, lno3-w, h19-g, z29a*, qdss.  Made vt200 an alias of vt220.
-#	* Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
-#	  att610, att620, att630,
-#	* Changed hazeltine name prefix from h to hz.
-#	* Sent t500 to the UFI file.
-#	* I think we've sucked all the juice out of BSDI's termcap file now.
-#	* Freeze for ncurses 1.9.8 release
-# 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
-#	* Unfreeze, linux kbs needed to be fixed.
-#	* Tim Theisen pinned down a bug in the DMD firmware.
-# 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
-#	* Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
-#	  (The broken ones had been shadowed by sgr.)
-# 9.12.3 (Thu Dec  7 17:47:22 EST 1995):
-#	* Added documentation on ECMA-48 standard.
-#	* New Amiga entry.
-# 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
-#	* More ECMA-48 stuff
-#	* Corrected typo in minix entry, added pc-minix.
-#	* Corrected khome/kend in xterm (thank you again, Aaron Ucko).
-#	* Added rxvt entry.
-#	* Added 1.3.x color-change capabilities to linux entry.
-# 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
-#	* Corrected rxvt entry khome/kend.
-#	* Corrected linux color change capabilities.
-#	* NeXT entries from Dave Wetzel.
-#	* Cleaned up if and rf file names (all in /usr/share now).
-#	* Changed linux op capability to avoid screwing up a background color
-#	  pair set by setterm.
-# 9.12.6 (Wed Feb  7 16:14:35 EST 1996):
-#	* Added xterm-sun.
-# 9.12.7 (Fri Feb  9 13:27:35 EST 1996):
-#	* Added visa50.
-#
-# 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
-#	* Another sweep through the Shuford archive looking for new info.
-#	* Added dg100 alias to dg6053 based on a comp.terminals posting.
-# 	* Added st52 from Per Persson.
-#	* Added eterm from the GNU Emacs 19.30 distribution.
-#	* Freeze for 1.9.9.
-# 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
-#	* FreeBSD console entries from Andrew Chernov.
-#	* Removed duplicate Atari st52 name.
-# 9.13.2 (Tue May  7 16:10:06 EDT 1996)
-#	* xterm doesn't actually have ACS_BLOCK.
-#	* Change klone+color setf/setb to simpler forms that can be
-#	  translated into termcap.
-#	* Added xterm1.
-#	* Removed mechanically-generated junk capabilities from cons* entries.
-#	* Added color support to bsdos.
-# 9.13.3 (Thu May  9 10:35:51 EDT 1996):
-#	* Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
-#	* Created ecma+color, linux can use it.  Also added ech to linux.
-#	* Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
-#	* Add descriptions to FreeBSD console entries.  Also shorten
-#	  some aliases to <= 14 chars for portability.
-#	* Added x68k console
-#	* Added OTbs to several VT-series entries.
-# 9.13.4 (Wed May 22 10:54:09 EDT 1996):
-#	* screen entry update for 3.7.1 from Michael Alan Dorfman.
-# 9.13.5 (Wed Jun  5 11:22:41 EDT 1996):
-#	* kterm correction due to Kenji Rikitake.
-#	* ACS correction in vt320-kll due to Phillippe De Muyter.
-# 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
-#	* Sun console entry correction from J.T. Conklin.
-#	* Changed all DEC VT300 and up terminals to use VT300 tab set
-# 9.13.7 (Mon Jul  8 20:14:32 EDT 1996):
-#	* Added smul to linux entry (we never noticed it was missing
-#	  because of sgr!).
-#	* Added rmln to hp+labels (deduced from other HP entries).
-#	* Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
-#	  pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
-#	* Corrected vt220 acsc.
-#	* The klone+sgr and klone+sgr-dumb entries now use klone+acs;
-#	  this corresponds to reality and helps prevent some tic warnings.
-#	* Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
-#	  hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
-#	  adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
-#	  qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
-#	  wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
-#	  adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
-#	  f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
-#	  owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
-#	  lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
-#	  dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
-#	  ifmr, v3220, wy100q, tandem653, ibmaed.
-#	* Added DWK terminal description.
-# 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
-#	* Many entries now have highlights inherited from adm+sgr.
-#	* xterm entry now corresponds to XFree86 3.1.2E, with color.
-#	* xtitle and xtitle-twm enable access to the X status line.
-#	* Added linux-1.3.6 color palette caps in conventional format.
-#	* Added adm1178 terminal.
-#	* Move fos and apollo terminals to obsolete category.
-#	* Aha! The BRL terminals file told us what the Iris extensions mean.
-#	* Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
-#	  commodore, cdc721-esc, excel62, osexec.  Replaced from the BRL file:
-#	  cit500, adm11.
-# 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
-#	* Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
-#	  aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
-#	* Corrected, from BRL termcap file: vi50.
-#	* Better rxvt entry & corrected xterm entries from Thomas Dickey.
-# 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
-#	* Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
-#	  att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
-#	  (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
-#	  tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
-#	  apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
-#	* Paired-attribute fixes to various terminals.
-#	* Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
-#	* xterm entry corrections from Thomas Dickey.
-# 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
-#	* Added t916 entry, translated from a termcap in SCO's support area.
-#	* New qnx entry from Michael Hunter.
-# 9.13.12 (Mon Aug  5 14:31:11 EDT 1996):
-#	* Added hpex2 from Ville Sulko.
-#	* Fixed a bug that ran the qnx and pcvtXX together.
-# 9.13.13 (Fri Aug  9 01:16:17 EDT 1996):
-#	* Added dtterm entry from Solaris CDE.
-# 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
-#	* corrected pairs#8 typo in dtterm entry.
-#	* added tvi9065.
-# 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
-#	* updated xterm entry to cover 3.1.2E's new features.
-# 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
-#	* Added new minix entry
-#	* Removed aliases of the form ^[0-9]* for obsolete terminals.
-#	* Commented out linux-old, nobody's using pre-1.2 kernels now.
-# 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
-#	* Added Prism entries and kt7ix.
-#	* Caution notes about EWAN and tabset files.
-#	* Changed /usr/lib/tabset -> /usr/share/tabset.
-#	* Added acsc/rmacs/smacs to vt52.
-# 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
-#	* Merged in Thomas Dickey's reorganization of the xterm entries;
-#	  added technical corrections to avoid warning messages.
-# 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
-#	* Added rmso=\E[27m in Linux entry.
-#	* Added koi8-r support for Linux console.
-#	* Replace xterm entries with canonical ones from XFree86 3.2.
-# 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
-#	* Added color_xterm from Jacob Mandelson
-# 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
-#	* Back off the xterm entry to use r6 as a base.
-# 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
-#	* Added dec-vt220 at Adrian Garside's request.
-# 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
-#	* Replaced minitel-2 entry.
-#	* Added MGR, ansi-nt.
-#	* Minor corrections to xterm entries.
-#	* Replaced EWAN telnet entry.
-#	* Dropped the reorder script generator.  It was a fossil.
-# 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
-#	* Thorsten Lockert added termcap `bs' to a lot of types, working from
-#	  the 4.4BSD Lite2 file.
-# 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
-#	* Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
-#	* Updated iris-ansi; corrected vt102-w.
-#	* Switch base xterm entry to 3.3 level.
-# 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
-#	* Added basic4.
-#	* Removed rmir/smir from tv92B.
-#
-# 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
-#	* add hds200 description (Walter Skorski)
-#	* add beterm entry (Fred Fish)
-#	* add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
-#	  iris-color entries.
-#	* add emx entries.
-#	* Replaced unixpc entry with Benjamin Sittler's corrected version.
-#	* Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
-#	  versions.
-#	* remove sgr string from qnx based on report by Xiaodan Tang
-#	* Added u8/u9, removed rmul/smul from sun-il.
-#	* 4.2 tic displays \0 rather than \200.
-#	* add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
-#	  apparently based on cp-866).
-#	* Merged in Pavel Roskin's acsc for linux-koi8
-#	* Corrected some erroneous \\'s to \.
-#	* 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
-#	* II -> ii in pcvtXX, screen, xterm.
-#	* Removed \n chars following ANSI escapes in sgr & friends.
-#	* Updated Wyse entries.
-#	* h19 corrections from Tim Pierce.
-#	* Noted that the dm2500 has both ich and smir.
-#	* added pccons for the Alpha under OSF/1.
-#	* Added Sony NEWS workstation entries and cit101e-rv.
-#	* Reverted `amiga'; to Kent Polk's version, as I'm told
-#	  the Verkuil entry messes up with Amiga Telnet.
-# 10.2.1 (Sun Mar  8 18:32:04 EST 1998):
-#	* Corrected attributions in 10.2.0 release notes.
-#	* Scanned the Shuford archive for new terminfos and information.
-#	* Removed sgr from qnx entry (Thomas Dickey).
-#	* Added entries for ICL and Kokusai Data Systems terminals.
-#	* Incorporated NCR terminfos from the Boundless Technology FTP site.
-#	* Incorporated att700 from the Boundless Technology FTP site.
-#	* Miscellaneous contact-address and Web-page updates.
-#
-# 1998/5/9
-#	* add nxterm and xterm-color terminfo description (request by Cristian
-#	  Gafton <gafton@redhat.com>).
-#	* modify rxvt terminfo description to clear alternate screen before
-#	  switching back to normal screen, for compatibility with applications
-#	  which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
-#	* modify linux terminfo description to reset color palette (reported
-#	  by Telford Tendys <telford@eng.uts.edu.au>).
-#
-# 1998/7/4
-#	* merge changes from current XFree86 xterm terminfo descriptions.
-#
-# 1998/7/25
-#	* Added minitel1 entries from Alexander Montaron.
-#	* Added qnxt2 from Federico Bianchi.
-#	* Added arm100 terminfo entries from Dave Millen.
-#
-# 1998/8/6
-#	* Added ncsa telnet entries from Francesco Potorti
-#
-# 1998/8/15
-#	* modify ncsa telnet entry to reflect color, other capabilities based on
-#	  examination of the source code - T.Dickey.
-#
-# 1998/8/22
-#	* Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
-#
-# 1998/8/29
-#	* Added Francesco Potorti's tuned Wyse 99 entries.
-#	* dtterm enacs correction from Alexander V. Lukyanov.
-#	* Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
-#	* correct a typo in icl6404 entry.
-#	* add xtermm and xtermc
-#
-# 1998/9/26
-#	* format most %'char' sequences to %{number}
-#	* adapt IBM AIX 3.2.5 terminfo - T.Dickey
-#	* merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
-#
-# 1998/10/10
-#	* update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
-#	* correct initialization string in xterm-r5, add misc other features
-#	  to correspond with xterm patch 84 - TD
-#
-# 1998/12/19
-#	* update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
-#	* add Mathew Vernon's mach console entries
-#	* corrections for ncsa function-keys (report by Larry Virden)
-#
-# 1998/12/19
-#	* change linux to use ncv#2, since underline does not work with color - TD
-#
-# 1999/1/9
-#	* add kbt to iris-ansi, document other shift/control functionkeys - TD
-#	* correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
-#	  application modes, change kent to use the correct keypad code - TD
-#
-# 1999/1/10
-#	* add entry for Tera Term - TD
-#
-# 1999/1/23
-#	* minor improvements for teraterm entry - TD
-#	* rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
-#	  and bsdos-bold to bsdos-pc (Jeffrey C Honig)
-#
-# 1999/2/20
-#	* resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
-#	  xterm and ncsa entries by removing the unneeded ones.  Note that
-#	  some entries will return kend & khome versus kslt and kfnd, for
-#	  PC-style keyboards versus strict vt220 compatiblity - TD
-#
-# 1999/3/13
-#	* adjust xterm-xfree86 khome/kend to match default PC-style keyboard
-#	  tables - TD
-#	* add 'crt' entry - TD
-#	* correct typos in 'linux-c' entry - TD
-#
-# 1999/3/14
-#	* update entries for BSD/OS console to use klone+sgr and klone+color
-#	  (Jeffrey C Honig)
-#
-# 1999/3/27
-#	* adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
-#
-# 1999/4/10
-#	* add linux-lat, from RedHat patches to ncurses 4.2
-#
-# 1999/4/17
-#	* add complete set of default function-key definitions for scoansi - TD.
-#
-# 1999/7/3
-#	* add cnorm, cvvis for Linux 2.2 kernels
-#
-# 1999/7/24
-#	* add kmous to xterm-r5 -TD
-#	* correct entries xterm+sl and xterm+sl-twm, which were missing the
-#	  parent "use" clause -TD
-#
-# 1999/7/31
-#	* corrected cnorm, added el1 in 'screen' description -TD
-#
-# 1999/8/14
-#	* add ms-vt100 -TD
-#
-# 1999/8/21
-#	* corrections to beterm entry -TD
-#
-# 1999/8/28
-#	* add cygwin entry -TD
-#
-# 1999/9/4
-#	* minor corrections for beterm entry -TD
-#
-# 1999/9/18
-#	* add acsc string to HP 70092 terminfo entry -Joerg Wunsch
-#
-# 1999/9/25
-#	* add amiga-8bit entry
-#	* add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
-#	  rcons-color, based on
-#	  ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
-#	* add alias for iris-ansi-net
-#
-# 1999/10/2
-#	* corrected scoansi entry's acsc, some function keys, add color -TD
-#
-# 1999/10/23
-#	* add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
-#	* reorder ncsa entries to make ncsa-vt220 use the alternate function
-#	  key mapping, leaving Potorti's entries more like he named them -TD
-#	* remove enter/exit am-mode from cygwin -TD
-#
-# 1999/10/30
-#	* correct typos in several entries (missing '[' from CSI):
-#	  mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
-#	  strings for avt-ns -TD
-#	* add 'dim' to ncv mask for linux (report by Klaus Weide).
-#
-# 1999/11/27
-#	* correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
-#	* add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
-#	* add xterm-88color and xterm-256color -TD
-#
-# 1999/12/4
-#	* add "obsolete" termcap strings -TD
-#	* add kvt and gnome entries -TD
-#
-# 1999/12/11
-#	* correct cup string for regent100 -TD
-#
-# 2000/1/1
-#	* update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
-#	* add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
-#	* change OTrs capabilities to rs2 -TD
-#	* add obsolete and extended capabilities to 'screen' -TD
-#
-# 2000/1/5
-#	* remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
-#	  with kf10 -TD
-#	* updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
-#	  and adding kcbt -TD
-#
-# 2000/1/12
-#	* remove incorrect khome/kend from xterm-xf86-v333, which was based on
-#	  nonstandard resource settings -TD
-#
-# 2000/2/26
-#	* minor fixes for xterm-*, based on Debian #58530 -TD
-#
-# 2000/3/4
-#	* add several terminal types from esr's "11.0", as well as comments.
-#	  bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
-#	  vt220-8bit, vt220-old, wy85-8bit
-#
-# 2000/3/18
-#	* add several terminal types from esr's "11.0.1" (ansi-*).
-#	* update OTxx capabilities for changes on 2000/3/4.
-#	* revert part of vt220 change (request by Todd C Miller for OpenBSD)
-#
-# 2000/3/26
-#	* move screen's AX extension to ecma+color, modify several entries to
-#	  use that, adjusting ncv as needed -TD
-#
-# 2000/4/8
-#	* add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
-#	* correct spelling error in entry name: bq300-rv was given as bg300-rv
-#	  in esr's version.
-#
-# 2000/4/15
-#	* add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
-#	* correct color definition for ibm3164, make minor changes to other
-#	  IBM terminal definitions based on recent terminfo descriptions -TD
-#
-# 2000/4/22
-#	* add mgterm, from NetBSD -TD
-#	* add alias sun-cgsix for sun-ss5 as per NetBSD
-#	* change cons25w to use rs2 for reset rather than rs1 -TD
-#	* add rc/sc to aixterm based on manpage -TD
-#
-# 2000/5/13
-#	* remove ncv from xterm-16color, xterm-256 color
-#
-# 2000/6/10
-#	* add kmous capability to linux to use Joerg Schoen's gpm patch.
-#
-# 2000/7/1
-#	* add Eterm (Michael Jennings)
-#
-# 2000-07-18
-#       * add amiga-vnc entry.
-#
-# 2000-08-12
-#	* correct description of Top Gun Telnet.
-#	* add kterm-color
-#
-# 2000-08-26
-#	* add qansi* entries from QNX ftp site.
-#
-# 2000-09-16
-#	* add Matrix Orbital entries by Eric Z. Ayers).
-#	* add xterm-basic, xterm-sco entries, update related entries to XFree86
-#	  4.0.1c -TD
-#
-# 2000-09-17
-#	* add S0, E0 extensions to screen's entry -TD
-#
-# 2000-09-23
-#	* several corrections based on tic's new parameter-checking code -TD
-#	* modify xterm-r6 and similar rs2 sequences which had \E7...\E8
-#	  bracketing sequences that reset video attributes (\E8 would restore
-#	  them) -TD
-#
-# 2000-11-11
-#	* rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
-#
-# 2000-12-16
-#	* improved scoansi, based on SCO man-page, and testing console,
-#	  scoterm with tack -TD
-#
-# 2001-01-27
-#	* modify kterm to use acsc via SCS controls.
-#
-# 2001-02-10
-#	* screen 3.9.8 allows xterm mouse controls to pass-through
-#
-# 2001-03-11
-#	* remove spurious "%|" from some xterm entries.
-#
-# 2001-03-31
-#	* modify 'screen' khome/kend to match screen 3.09.08
-#	* add examples of 'screen' customization (screen.xterm-xfree86,
-#	  screen.xterm-r6, screen.teraterm) -TD
-#
-# 2001-04-14
-#	* correct definitions of shifted editing keys for xterm-xfree86 -TD
-#	* add "Apple_Terminal" entries -Benjamin Sittler
-#	* remove time-delays from "Apple_Terminal" entries -TD
-#	* make sgr entries time-delays consistent with individual caps -TD
-#
-# 2001-05-05
-#	* corrected/updated screen.xterm-xfree86
-#
-# 2001-05-19
-#	* ELKS descriptions, from Federico Bianchi
-#	* add u6 (CSR) to Eterm (Michael Jennings).
-#
-# 2001-07-21
-#	* renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
-#	  tic which handles names no longer than 14 characters.  Add
-#	  corresponding descriptions for the Darwin PowerPC console named
-#	  "xnuppc" -Benjamin Sittler
-#
-# 2001-09-01
-#	* change kbs in mach entries to ^? (Marcus Brinkmann).
-#
-# 2001-11-17
-#	* add "putty" entry -TD
-#	* updated "Apple_Terminal" entries -Benjamin Sittler
-#
-# 2001-11-24
-#	* add ms-vt100-color entry -TD
-#	* add "konsole" entries -TD
-#
-# 2001-12-08
-#	* update gnome entry to Redhat 7.2 -TD
-#
-# The following sets edit modes for GNU EMACS.
-# Local Variables:
-# fill-prefix:"\t"
-# fill-column:75
-# comment-column:0
-# comment-start-skip:"^#+"
-# comment-start:"# "
-# compile-command:"tic -c terminfo.master"
-# End:
-######## SHANTIH!  SHANTIH!  SHANTIH!
--- a/lib-src/ChangeLog	Thu Jul 31 02:47:32 2008 +0000
+++ b/lib-src/ChangeLog	Thu Jul 31 05:33:56 2008 +0000
@@ -1,3 +1,8 @@
+2008-07-31  Dan Nicolaescu  <dann@ics.uci.edu>
+
+	* etags.c:
+	* emacsclient.c: Remove VMS support.
+
 2008-07-27  Dan Nicolaescu  <dann@ics.uci.edu>

 	Remove support for Mac Carbon.
--- a/lib-src/emacsclient.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/lib-src/emacsclient.c	Thu Jul 31 05:33:56 2008 +0000
@@ -64,15 +64,11 @@
 #include <unistd.h>
 #endif

-#ifdef VMS
-# include "vms-pwd.h"
-#else /* not VMS */
 #ifdef WINDOWSNT
 # include <io.h>
 #else /* not WINDOWSNT */
 # include <pwd.h>
 #endif /* not WINDOWSNT */
-#endif /* not VMS */
 #include <sys/stat.h>

 #include <signal.h>
--- a/lib-src/etags.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/lib-src/etags.c	Thu Jul 31 05:33:56 2008 +0000
@@ -172,13 +172,8 @@
    extern void exit __P((int));
    extern void free __P((void *));
    extern void *memmove __P((void *, const void *, unsigned long));
-#  ifdef VMS
-#   define EXIT_SUCCESS	1
-#   define EXIT_FAILURE	0
-#  else /* no VMS */
-#   define EXIT_SUCCESS	0
-#   define EXIT_FAILURE	1
-#  endif
+#  define EXIT_SUCCESS	0
+#  define EXIT_FAILURE	1
 # endif
 #endif /* !WINDOWSNT */

@@ -1094,131 +1089,6 @@
 }


-#ifdef VMS			/* VMS specific functions */
-
-#define	EOS	'\0'
-
-/* This is a BUG!  ANY arbitrary limit is a BUG!
-   Won't someone please fix this?  */
-#define	MAX_FILE_SPEC_LEN	255
-typedef struct	{
-  short   curlen;
-  char    body[MAX_FILE_SPEC_LEN + 1];
-} vspec;
-
-/*
- v1.05 nmm 26-Jun-86 fn_exp - expand specification of list of file names
- returning in each successive call the next file name matching the input
- spec. The function expects that each in_spec passed
- to it will be processed to completion; in particular, up to and
- including the call following that in which the last matching name
- is returned, the function ignores the value of in_spec, and will
- only start processing a new spec with the following call.
- If an error occurs, on return out_spec contains the value
- of in_spec when the error occurred.
-
- With each successive file name returned in out_spec, the
- function's return value is one. When there are no more matching
- names the function returns zero. If on the first call no file
- matches in_spec, or there is any other error, -1 is returned.
-*/
-
-#include	<rmsdef.h>
-#include	<descrip.h>
-#define		OUTSIZE	MAX_FILE_SPEC_LEN
-static short
-fn_exp (out, in)
-     vspec *out;
-     char *in;
-{
-  static long context = 0;
-  static struct dsc$descriptor_s o;
-  static struct dsc$descriptor_s i;
-  static bool pass1 = TRUE;
-  long status;
-  short retval;
-
-  if (pass1)
-    {
-      pass1 = FALSE;
-      o.dsc$a_pointer = (char *) out;
-      o.dsc$w_length = (short)OUTSIZE;
-      i.dsc$a_pointer = in;
-      i.dsc$w_length = (short)strlen(in);
-      i.dsc$b_dtype = DSC$K_DTYPE_T;
-      i.dsc$b_class = DSC$K_CLASS_S;
-      o.dsc$b_dtype = DSC$K_DTYPE_VT;
-      o.dsc$b_class = DSC$K_CLASS_VS;
-    }
-  if ((status = lib$find_file(&i, &o, &context, 0, 0)) == RMS$_NORMAL)
-    {
-      out->body[out->curlen] = EOS;
-      return 1;
-    }
-  else if (status == RMS$_NMF)
-    retval = 0;
-  else
-    {
-      strcpy(out->body, in);
-      retval = -1;
-    }
-  lib$find_file_end(&context);
-  pass1 = TRUE;
-  return retval;
-}
-
-/*
-  v1.01 nmm 19-Aug-85 gfnames - return in successive calls the
-  name of each file specified by the provided arg expanding wildcards.
-*/
-static char *
-gfnames (arg, p_error)
-     char *arg;
-     bool *p_error;
-{
-  static vspec filename = {MAX_FILE_SPEC_LEN, "\0"};
-
-  switch (fn_exp (&filename, arg))
-    {
-    case 1:
-      *p_error = FALSE;
-      return filename.body;
-    case 0:
-      *p_error = FALSE;
-      return NULL;
-    default:
-      *p_error = TRUE;
-      return filename.body;
-    }
-}
-
-#ifndef OLD  /* Newer versions of VMS do provide `system'.  */
-system (cmd)
-     char *cmd;
-{
-  error ("%s", "system() function not implemented under VMS");
-}
-#endif
-
-#define	VERSION_DELIM	';'
-char *massage_name (s)
-     char *s;
-{
-  char *start = s;
-
-  for ( ; *s; s++)
-    if (*s == VERSION_DELIM)
-      {
-	*s = EOS;
-	break;
-      }
-    else
-      *s = lowcase (*s);
-  return start;
-}
-#endif /* VMS */
-
-
 int
 main (argc, argv)
      int argc;
@@ -1231,9 +1101,6 @@
   int current_arg, file_count;
   linebuffer filename_lb;
   bool help_asked = FALSE;
-#ifdef VMS
-  bool got_err;
-#endif
  char *optstring;
  int opt;

@@ -1441,21 +1308,7 @@
 	  analyse_regex (argbuffer[i].what);
 	  break;
 	case at_filename:
-#ifdef VMS
-	  while ((this_file = gfnames (argbuffer[i].what, &got_err)) != NULL)
-	    {
-	      if (got_err)
-		{
-		  error ("can't find file %s\n", this_file);
-		  argc--, argv++;
-		}
-	      else
-		{
-		  this_file = massage_name (this_file);
-		}
-#else
 	      this_file = argbuffer[i].what;
-#endif
 	      /* Input file named "-" means read file names from stdin
 		 (one per line) and use them. */
 	      if (streq (this_file, "-"))
@@ -1468,9 +1321,6 @@
 		}
 	      else
 		process_file_name (this_file, lang);
-#ifdef VMS
-	    }
-#endif
 	  break;
         case at_stdin:
           this_file = argbuffer[i].what;
--- a/lisp/ChangeLog	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/ChangeLog	Thu Jul 31 05:33:56 2008 +0000
@@ -1,3 +1,42 @@
+2008-07-31  Dan Nicolaescu  <dann@ics.uci.edu>
+
+	* textmodes/texinfmt.el:
+	* nxml/nxml-enc.el:
+	* mail/feedmail.el:
+	* international/mule.el:
+	* international/latexenc.el:
+	* emulation/viper-util.el:
+	* emulation/viper-init.el:
+	* emulation/viper-ex.el:
+	* emacs-lisp/bytecomp.el:
+	* version.el:
+	* subr.el:
+	* startup.el:
+	* sort.el:
+	* shadowfile.el:
+	* recentf.el:
+	* printing.el:
+	* paths.el:
+	* minibuffer.el:
+	* ls-lisp.el:
+	* loadup.el:
+	* hippie-exp.el:
+	* finder.el:
+	* files.el:
+	* ediff-util.el:
+	* ediff-ptch.el:
+	* ediff-init.el:
+	* ediff-diff.el:
+	* dired.el:
+	* dired-aux.el:
+	* cus-edit.el:
+	* bindings.el:
+	* arc-mode.el:
+	* add-log.el: Remove VMS support.
+	* obsolete/vmsproc.el:
+	* obsolete/vms-pmail.el:
+	* obsolete/vms-patch.el: Remove file.
+
 2008-07-31  Alan Mackenzie  <acm@muc.de>

 	* progmodes/cc-mode.el (c-before-hack-hook): New function
--- a/lisp/add-log.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/add-log.el	Thu Jul 31 05:33:56 2008 +0000
@@ -556,9 +556,7 @@
 (defun change-log-name ()
   "Return (system-dependent) default name for a change log file."
   (or change-log-default-name
-      (if (eq system-type 'vax-vms)
-	  "$CHANGE_LOG$.TXT"
-	"ChangeLog")))
+      "ChangeLog"))

 (defun add-log-edit-prev-comment (arg)
   "Cycle backward through Log-Edit mode comment history.
--- a/lisp/arc-mode.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/arc-mode.el	Thu Jul 31 05:33:56 2008 +0000
@@ -1731,7 +1731,7 @@
 			 str archive-file-name-coding-system)))
 	     (isdir   (and (= ucsize 0)
 			   (string= (file-name-nondirectory efnname) "")))
-	     (mode    (cond ((memq creator '(2 3)) ; Unix + VMS
+	     (mode    (cond ((memq creator '(2 3)) ; Unix
 			     (archive-l-e (+ p 40) 2))
 			    ((memq creator '(0 5 6 7 10 11 15)) ; Dos etc.
 			     (logior ?\444
@@ -1800,7 +1800,7 @@
 	       (oldmode (aref fil 3))
 	       (newval  (archive-calc-mode oldmode newmode t))
 	       (inhibit-read-only t))
-	  (cond ((memq creator '(2 3)) ; Unix + VMS
+	  (cond ((memq creator '(2 3)) ; Unix
 		 (goto-char (+ p 40))
 		 (delete-char 2)
 		 (insert-unibyte (logand newval 255) (lsh newval -8)))
--- a/lisp/bindings.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/bindings.el	Thu Jul 31 05:33:56 2008 +0000
@@ -583,10 +583,6 @@
        (cond ((memq system-type '(ms-dos windows-nt))
 	      '(".o" "~" ".bin" ".bak" ".obj" ".map" ".ico" ".pif" ".lnk"
 		".a" ".ln" ".blg" ".bbl" ".dll" ".drv" ".vxd" ".386"))
-	     ((eq system-type 'vax-vms)
-	      '(".obj" ".exe" ".bin" ".lbin" ".sbin"
-		".brn" ".rnt" ".lni"
-		".olb" ".tlb" ".mlb" ".hlb"))
 	     (t
 	      '(".o" "~" ".bin" ".lbin" ".so"
 		".a" ".ln" ".blg" ".bbl")))
--- a/lisp/cus-edit.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/cus-edit.el	Thu Jul 31 05:33:56 2008 +0000
@@ -292,10 +292,6 @@
   "Front-ends/assistants for, or emulators of, UNIX features."
   :group 'environment)

-(defgroup vms nil
-  "Support code for vms."
-  :group 'environment)
-
 (defgroup i18n nil
   "Internationalization and alternate character-set support."
   :link '(custom-manual "(emacs)International")
--- a/lisp/dired-aux.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/dired-aux.el	Thu Jul 31 05:33:56 2008 +0000
@@ -1108,7 +1108,6 @@
   ;; or wildcard lines.
   ;; Important: never moves into the next subdir.
   ;; DIR is assumed to be unhidden.
-  ;; Will probably be redefined for VMS etc.
   (save-excursion
     (or (dired-goto-subdir dir) (error "This cannot happen"))
     (forward-line 1)
@@ -1936,7 +1935,6 @@
     (save-excursion (dired-mark-remembered mark-alist))
     (restore-buffer-modified-p modflag)))

-;; This is a separate function for dired-vms.
 (defun dired-insert-subdir-validate (dirname &optional switches)
   ;; Check that it is valid to insert DIRNAME with SWITCHES.
   ;; Signal an error if invalid (e.g. user typed `i' on `..').
--- a/lisp/dired.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/dired.el	Thu Jul 31 05:33:56 2008 +0000
@@ -719,7 +719,6 @@
 	 (file-readable-p dirname)
 	 (dired-directory-changed-p dirname))))

-;; Separate function from dired-noselect for the sake of dired-vms.el.
 (defun dired-internal-noselect (dir-or-list &optional switches mode)
   ;; If there is an existing dired buffer for DIRNAME, just leave
   ;; buffer as it is (don't even call dired-revert).
@@ -1987,8 +1986,7 @@
   ;;"Convert FILE (a file name relative to DIR) to an absolute file name."
   ;; We can't always use expand-file-name as this would get rid of `.'
   ;; or expand in / instead default-directory if DIR=="".
-  ;; This should be good enough for ange-ftp, but might easily be
-  ;; redefined (for VMS?).
+  ;; This should be good enough for ange-ftp.
   ;; It should be reasonably fast, though, as it is called in
   ;; dired-get-filename.
   (concat (or dir default-directory) file))
@@ -2554,7 +2552,7 @@
 (defun dired-internal-do-deletions (l arg)
   ;; L is an alist of files to delete, with their buffer positions.
   ;; ARG is the prefix arg.
-  ;; Filenames are absolute (VMS needs this for logical search paths).
+  ;; Filenames are absolute.
   ;; (car L) *must* be the *last* (bottommost) file in the dired buffer.
   ;; That way as changes are made in the buffer they do not shift the
   ;; lines still to be changed, so the (point) values in L stay valid.
@@ -3442,9 +3440,6 @@
 	     '(dired-mode . dired-restore-desktop-buffer))


-(if (eq system-type 'vax-vms)
-    (load "dired-vms"))
-
 (provide 'dired)

 (run-hooks 'dired-load-hook)		; for your customizations
--- a/lisp/ediff-diff.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/ediff-diff.el	Thu Jul 31 05:33:56 2008 +0000
@@ -56,7 +56,6 @@
   (cond ((eq system-type 'emx) "cmd") ; OS/2
 	((memq system-type '(ms-dos windows-nt windows-95))
 	 shell-file-name) ; no standard name on MS-DOS
-	((memq system-type '(vax-vms axp-vms)) "*dcl*") ; VMS
 	(t  "sh")) ; UNIX
   "*The shell used to run diff and patch.
 If user's .profile or .cshrc files are set up correctly, any shell
@@ -336,9 +335,7 @@
     (erase-buffer)
     (insert (ediff-with-current-buffer diff-buff (buffer-string)))
     (goto-char (point-min))
-    (delete-matching-lines ok-regexp)
-    (if (memq system-type '(vax-vms axp-vms))
-	(delete-matching-lines "^$")))
+    (delete-matching-lines ok-regexp))
   ;; If diff reports errors, show them then quit.
   (if (/= 0 (ediff-with-current-buffer ediff-error-buffer (buffer-size)))
       (let ((ctl-buf ediff-control-buffer)
--- a/lisp/ediff-init.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/ediff-init.el	Thu Jul 31 05:33:56 2008 +0000
@@ -1400,8 +1400,6 @@
 ;;;  (file-name-as-directory
 ;;;   (cond ((memq system-type '(ms-dos windows-nt))
 ;;;	  (or (getenv "TEMP") (getenv "TMPDIR") (getenv "TMP") "c:/temp"))
-;;;	 ((memq system-type '(vax-vms axp-vms))
-;;;	  (or (getenv "TMPDIR") (getenv "TMP") (getenv "TEMP") "SYS$SCRATCH:"))
 ;;;	 (t
 ;;;	  (or (getenv "TMPDIR") (getenv "TMP") (getenv "TEMP") "/tmp"))))
   "*Prefix to put on Ediff temporary file names.
--- a/lisp/ediff-ptch.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/ediff-ptch.el	Thu Jul 31 05:33:56 2008 +0000
@@ -61,7 +61,7 @@

 ;; the default backup extension
 (defconst ediff-default-backup-extension
-  (if (memq system-type '(vax-vms axp-vms emx ms-dos))
+  (if (memq system-type '(emx ms-dos))
       "_orig" ".orig"))
--- a/lisp/ediff-util.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/ediff-util.el	Thu Jul 31 05:33:56 2008 +0000
@@ -3217,7 +3217,7 @@
 ;; Quote metacharacters (using \) when executing diff in Unix, but not in
 ;; EMX OS/2
 ;;(defun ediff-protect-metachars (str)
-;;  (or (memq system-type '(emx vax-vms axp-vms))
+;;  (or (memq system-type '(emx))
 ;;      (let ((limit 0))
 ;;	(while (string-match ediff-metachars str limit)
 ;;	  (setq str (concat (substring str 0 (match-beginning 0))
--- a/lisp/emacs-lisp/bytecomp.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/emacs-lisp/bytecomp.el	Thu Jul 31 05:33:56 2008 +0000
@@ -197,9 +197,7 @@
   "Emacs Lisp byte-compiler."
   :group 'lisp)

-(defcustom emacs-lisp-file-regexp (if (eq system-type 'vax-vms)
-				      "\\.EL\\(;[0-9]+\\)?$"
-				    "\\.el$")
+(defcustom emacs-lisp-file-regexp "\\.el$"
   "*Regexp which matches Emacs Lisp source files.
 You may want to redefine the function `byte-compile-dest-file'
 if you change this variable."
@@ -225,9 +223,7 @@
 with the extension `.el'), add `c' to it; otherwise add `.elc'."
       (setq filename (byte-compiler-base-file-name filename))
       (setq filename (file-name-sans-versions filename))
-      (cond ((eq system-type 'vax-vms)
-	     (concat (substring filename 0 (string-match ";" filename)) "c"))
-	    ((string-match emacs-lisp-file-regexp filename)
+      (cond ((string-match emacs-lisp-file-regexp filename)
 	     (concat (substring filename 0 (match-beginning 0)) ".elc"))
 	    (t (concat filename ".elc")))))

@@ -1788,7 +1784,6 @@
 	(with-current-buffer output-buffer
 	  (goto-char (point-max))
 	  (insert "\n")			; aaah, unix.
-	  (let ((vms-stmlf-recfm t))
 	    (if (file-writable-p target-file)
 		;; We must disable any code conversion here.
 		(let ((coding-system-for-write 'no-conversion))
@@ -1808,7 +1803,7 @@
 			    (if (file-exists-p target-file)
 				"cannot overwrite file"
 			      "directory not writable or nonexistent")
-			    target-file))))
+			    target-file)))
 	  (kill-buffer (current-buffer)))
 	(if (and byte-compile-generate-call-tree
 		 (or (eq t byte-compile-generate-call-tree)
--- a/lisp/emulation/viper-ex.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/emulation/viper-ex.el	Thu Jul 31 05:33:56 2008 +0000
@@ -331,12 +331,11 @@
   (cond (ex-unix-type-shell 'viper-glob-unix-files)
 	((eq system-type 'emx) 'viper-glob-mswindows-files) ; OS/2
 	(viper-ms-style-os-p 'viper-glob-mswindows-files) ; Microsoft OS
-	(viper-vms-os-p 'viper-glob-unix-files) ; VMS
 	(t  'viper-glob-unix-files) ; presumably UNIX
 	)
   "Expand the file spec containing wildcard symbols.
 The default tries to set this variable to work with Unix, Windows,
-OS/2, and VMS.
+and OS/2.

 However, if it doesn't work right for some types of Unix shells or some OS,
 the user should supply the appropriate function and set this variable to the
--- a/lisp/emulation/viper-init.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/emulation/viper-init.el	Thu Jul 31 05:33:56 2008 +0000
@@ -69,11 +69,6 @@
   :type 'boolean
   :tag "Is it Microsoft-made OS?"
   :group 'viper-misc)
-(defcustom viper-vms-os-p (memq system-type '(vax-vms axp-vms))
-  "Tells if Emacs is running under VMS."
-  :type 'boolean
-  :tag "Is it VMS?"
-  :group 'viper-misc)

 (defcustom viper-suppress-input-method-change-message nil
   "If t, the message notifying about changes in the input method is not displayed.
--- a/lisp/emulation/viper-util.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/emulation/viper-util.el	Thu Jul 31 05:33:56 2008 +0000
@@ -397,11 +397,10 @@
 ;;; Support for :e, :r, :w file globbing

 ;; Glob the file spec.
-;; This function is designed to work under Unix.  It might also work under VMS.
+;; This function is designed to work under Unix.
 (defun viper-glob-unix-files (filespec)
   (let ((gshell
 	 (cond (ex-unix-type-shell shell-file-name)
-	       ((memq system-type '(vax-vms axp-vms)) "*dcl*") ; VAX VMS
 	       (t "sh"))) ; probably Unix anyway
 	(gshell-options
 	 ;; using cond in anticipation of further additions
--- a/lisp/files.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/files.el	Thu Jul 31 05:33:56 2008 +0000
@@ -70,8 +70,7 @@
   :group 'abbrev
   :group 'find-file)

-;; Turn off backup files on VMS since it has version numbers.
-(defcustom make-backup-files (not (eq system-type 'vax-vms))
+(defcustom make-backup-files t
   "Non-nil means make a backup of a file the first time it is saved.
 This can be done by renaming the file or by copying.

@@ -190,8 +189,6 @@
   (file-name-as-directory
    (cond ((memq system-type '(ms-dos windows-nt))
 	  (or (getenv "TEMP") (getenv "TMPDIR") (getenv "TMP") "c:/temp"))
-	 ((memq system-type '(vax-vms axp-vms))
-	  (or (getenv "TMPDIR") (getenv "TMP") (getenv "TEMP") "SYS$SCRATCH:"))
 	 (t
 	  (or (getenv "TMPDIR") (getenv "TMP") (getenv "TEMP") "/tmp"))))
   "The directory for writing temporary files."
@@ -216,7 +213,6 @@
 (declare-function dired-unmark "dired" (arg))
 (declare-function dired-do-flagged-delete "dired" (&optional nomessage))
 (declare-function dos-8+3-filename "dos-fns" (filename))
-(declare-function vms-read-directory "vms-patch" (dirname switches buffer))
 (declare-function view-mode-disable "view" ())

 (defvar file-name-invalid-regexp
@@ -625,8 +621,7 @@
   "Change current directory to given absolute file name DIR."
   ;; Put the name into directory syntax now,
   ;; because otherwise expand-file-name may give some bad results.
-  (if (not (eq system-type 'vax-vms))
-      (setq dir (file-name-as-directory dir)))
+  (setq dir (file-name-as-directory dir))
   (setq dir (abbreviate-file-name (expand-file-name dir)))
   (if (not (file-directory-p dir))
       (if (file-exists-p dir)
@@ -1461,11 +1456,7 @@
       filename)))

 (defcustom find-file-not-true-dirname-list nil
-  "List of logical names for which visiting shouldn't save the true dirname.
-On VMS, when you visit a file using a logical name that searches a path,
-you may or may not want the visited file name to record the specific
-directory where the file was found.  If you *do not* want that, add the logical
-name to this list as a string."
+  "List of logical names for which visiting shouldn't save the true dirname."
   :type '(repeat (string :tag "Name"))
   :group 'find-file)

@@ -1765,15 +1756,6 @@
 	(setq buffer-file-truename
 	      (abbreviate-file-name (file-truename buffer-file-name))))
       (setq buffer-file-number number)
-      ;; On VMS, we may want to remember which directory in a search list
-      ;; the file was found in.
-      (and (eq system-type 'vax-vms)
-	   (let (logical)
-	     (if (string-match ":" (file-name-directory filename))
-		 (setq logical (substring (file-name-directory filename)
-					  0 (match-beginning 0))))
-	     (not (member logical find-file-not-true-dirname-list)))
-	   (setq buffer-file-name buffer-file-truename))
       (if find-file-visit-truename
 	  (setq buffer-file-name (expand-file-name buffer-file-truename)))
       ;; Set buffer's default directory to that of the file.
@@ -2412,7 +2394,7 @@
 	    (while name
 	      ;; Find first matching alist entry.
 	      (setq mode
-		    (if (memq system-type '(vax-vms windows-nt cygwin))
+		    (if (memq system-type '(windows-nt cygwin))
 			;; System is case-insensitive.
 			(let ((case-fold-search t))
 			  (assoc-default name auto-mode-alist
@@ -3279,8 +3261,6 @@
     (setq buffer-file-name filename)
     (if filename			; make buffer name reflect filename.
 	(let ((new-name (file-name-nondirectory buffer-file-name)))
-	  (if (eq system-type 'vax-vms)
-	      (setq new-name (downcase new-name)))
 	  (setq default-directory (file-name-directory buffer-file-name))
 	  ;; If new-name == old-name, renaming would add a spurious <2>
 	  ;; and it's considered as a feature in rename-buffer.
@@ -3519,22 +3499,11 @@
     (if handler
 	(funcall handler 'file-name-sans-versions name keep-backup-version)
       (substring name 0
-		 (if (eq system-type 'vax-vms)
-		     ;; VMS version number is (a) semicolon, optional
-		     ;; sign, zero or more digits or (b) period, option
-		     ;; sign, zero or more digits, provided this is the
-		     ;; second period encountered outside of the
-		     ;; device/directory part of the file name.
-		     (or (string-match ";[-+]?[0-9]*\\'" name)
-			 (if (string-match "\\.[^]>:]*\\(\\.[-+]?[0-9]*\\)\\'"
-					   name)
-			     (match-beginning 1))
-			 (length name))
-		   (if keep-backup-version
-		       (length name)
-		     (or (string-match "\\.~[-[:alnum:]:#@^._]+~\\'" name)
-			 (string-match "~\\'" name)
-			 (length name))))))))
+		 (if keep-backup-version
+		     (length name)
+		   (or (string-match "\\.~[-[:alnum:]:#@^._]+~\\'" name)
+		       (string-match "~\\'" name)
+		       (length name)))))))

 (defun file-ownership-preserved-p (file)
   "Return t if deleting FILE and rewriting it would preserve the owner."
@@ -3737,8 +3706,6 @@
       (string-to-number (substring fn backup-extract-version-start -1))
       0))

-;; I believe there is no need to alter this behavior for VMS;
-;; since backup files are not made on VMS, it should not get called.
 (defun find-backup-file-name (fn)
   "Find a file name for a backup file FN, and suggestions for deletions.
 Value is a list whose car is the name for the backup file
@@ -3984,19 +3951,6 @@
     (if (buffer-modified-p)
 	(let ((recent-save (recent-auto-save-p))
 	      setmodes)
-	  ;; On VMS, rename file and buffer to get rid of version number.
-	  (if (and (eq system-type 'vax-vms)
-		   (not (string= buffer-file-name
-				 (file-name-sans-versions buffer-file-name))))
-	      (let (buffer-new-name)
-		;; Strip VMS version number before save.
-		(setq buffer-file-name
-		      (file-name-sans-versions buffer-file-name))
-		;; Construct a (unique) buffer name to correspond.
-		(let ((buf (create-file-buffer (downcase buffer-file-name))))
-		  (setq buffer-new-name (buffer-name buf))
-		  (kill-buffer buf))
-		(rename-buffer buffer-new-name)))
 	  ;; If buffer has no file name, ask user for one.
 	  (or buffer-file-name
 	      (let ((filename
@@ -5036,15 +4990,13 @@
     (concat "\\`" result "\\'")))

 (defcustom list-directory-brief-switches
-  (if (eq system-type 'vax-vms) "" "-CF")
+  "-CF"
   "Switches for `list-directory' to pass to `ls' for brief listing."
   :type 'string
   :group 'dired)

 (defcustom list-directory-verbose-switches
-  (if (eq system-type 'vax-vms)
-      "/PROTECTION/SIZE/DATE/OWNER/WIDTH=(OWNER:10)"
-    "-l")
+    "-l"
   "Switches for `list-directory' to pass to `ls' for verbose listing."
   :type 'string
   :group 'dired)
@@ -5328,8 +5280,6 @@
     (if handler
 	(funcall handler 'insert-directory file switches
 		 wildcard full-directory-p)
-      (if (eq system-type 'vax-vms)
-	  (vms-read-directory file switches (current-buffer))
 	(let (result (beg (point)))

 	  ;; Read the actual directory using `insert-directory-program'.
@@ -5558,7 +5508,7 @@
 		      ;; Replace "total" with "used", to avoid confusion.
 		      (replace-match "total used in directory" nil nil nil 1)
 		      (end-of-line)
-		      (insert " available " available)))))))))))
+		      (insert " available " available))))))))))

 (defun insert-directory-adj-pos (pos error-lines)
   "Convert `ls --dired' file name position value POS to a buffer position.
@@ -5610,7 +5560,7 @@
 				(buffer-list))))
 	   (yes-or-no-p "Modified buffers exist; exit anyway? "))
        (or (not (fboundp 'process-list))
-	   ;; process-list is not defined on VMS.
+	   ;; process-list is not defined on MSDOS.
 	   (let ((processes (process-list))
 		 active)
 	     (while processes
--- a/lisp/finder.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/finder.el	Thu Jul 31 05:33:56 2008 +0000
@@ -83,8 +83,6 @@
     (tex	. "supporting code for the TeX formatter")
     (tools	. "programming tools")
     (unix	. "front-ends/assistants for, or emulators of, UNIX-like features")
-;; Not a custom group and not currently useful.
-;;    (vms	. "support code for vms")
     (wp		. "word processing")
     ))
--- a/lisp/gnus/gnus-registry.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/gnus/gnus-registry.el	Thu Jul 31 05:33:56 2008 +0000
@@ -258,9 +258,7 @@
 			     (if (and (eq system-type 'ms-dos)
 				      (not (gnus-long-file-names)))
 				 "%s#%d.tm#" ; MSDOS limits files to 8+3
-			       (if (memq system-type '(vax-vms axp-vms))
-				   "%s$tmp$%d"
-				 "%s#tmp#%d"))
+			       "%s#tmp#%d")
 			     working-dir (setq i (1+ i))))
 		      (file-exists-p working-file)))
--- a/lisp/gnus/gnus-start.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/gnus/gnus-start.el	Thu Jul 31 05:33:56 2008 +0000
@@ -2799,9 +2799,7 @@
                                    (if (and (eq system-type 'ms-dos)
                                             (not (gnus-long-file-names)))
                                        "%s#%d.tm#" ; MSDOS limits files to 8+3
-                                     (if (memq system-type '(vax-vms axp-vms))
-                                         "%s$tmp$%d"
-                                       "%s#tmp#%d"))
+				     "%s#tmp#%d")
                                    working-dir (setq i (1+ i))))
                             (file-exists-p working-file)))
--- a/lisp/gnus/message.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/gnus/message.el	Thu Jul 31 05:33:56 2008 +0000
@@ -5296,7 +5296,7 @@
 	   (* 25 25)))
   (let ((tm (current-time)))
     (concat
-     (if (or (memq system-type '(ms-dos emx vax-vms))
+     (if (or (memq system-type '(ms-dos emx))
 	     ;; message-number-base36 doesn't handle bigints.
 	     (floatp (user-uid)))
 	 (let ((user (downcase (user-login-name))))
@@ -6858,14 +6858,13 @@
   (interactive)
   (let ((file-name (make-auto-save-file-name)))
     (cond ((save-window-excursion
-	     (if (not (eq system-type 'vax-vms))
-		 (with-output-to-temp-buffer "*Directory*"
-		   (with-current-buffer standard-output
-		     (fundamental-mode)) ; for Emacs 20.4+
-		   (buffer-disable-undo standard-output)
-		   (let ((default-directory "/"))
-		     (call-process
-		      "ls" nil standard-output nil "-l" file-name))))
+	     (with-output-to-temp-buffer "*Directory*"
+	       (with-current-buffer standard-output
+		 (fundamental-mode))	; for Emacs 20.4+
+	       (buffer-disable-undo standard-output)
+	       (let ((default-directory "/"))
+		 (call-process
+		  "ls" nil standard-output nil "-l" file-name)))
 	     (yes-or-no-p (format "Recover auto save file %s? " file-name)))
 	   (let ((buffer-read-only nil))
 	     (erase-buffer)
--- a/lisp/hippie-exp.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/hippie-exp.el	Thu Jul 31 05:33:56 2008 +0000
@@ -439,13 +439,13 @@
   (if (not old)
       (progn
 	(he-init-string (he-file-name-beg) (point))
-	(let ((name-part (he-file-name-nondirectory he-search-string))
-	      (dir-part (expand-file-name (or (he-file-name-directory
+	(let ((name-part (file-name-nondirectory he-search-string))
+	      (dir-part (expand-file-name (or (file-name-directory
 					       he-search-string) ""))))
 	  (if (not (he-string-member name-part he-tried-table))
 	      (setq he-tried-table (cons name-part he-tried-table)))
 	  (if (and (not (equal he-search-string ""))
-		   (he-file-directory-p dir-part))
+		   (file-directory-p dir-part))
 	      (setq he-expand-list (sort (file-name-all-completions
 					  name-part
 					  dir-part)
@@ -460,7 +460,7 @@
 	(if old (he-reset-string))
 	())
       (let ((filename (he-concat-directory-file-name
-		       (he-file-name-directory he-search-string)
+		       (file-name-directory he-search-string)
 		       (car he-expand-list))))
 	(he-substitute-string filename)
 	(setq he-tried-table (cons (car he-expand-list) (cdr he-tried-table)))
@@ -476,11 +476,11 @@
     (if (not old)
 	(progn
 	  (he-init-string (he-file-name-beg) (point))
-	  (let ((name-part (he-file-name-nondirectory he-search-string))
-		(dir-part (expand-file-name (or (he-file-name-directory
+	  (let ((name-part (file-name-nondirectory he-search-string))
+		(dir-part (expand-file-name (or (file-name-directory
 						 he-search-string) ""))))
 	    (if (and (not (equal he-search-string ""))
-		     (he-file-directory-p dir-part))
+		     (file-directory-p dir-part))
 		(setq expansion (file-name-completion name-part
 						      dir-part)))
 	    (if (or (eq expansion t)
@@ -493,16 +493,14 @@
 	  (if old (he-reset-string))
 	  ())
 	(let ((filename (he-concat-directory-file-name
-			 (he-file-name-directory he-search-string)
+			 (file-name-directory he-search-string)
 			 expansion)))
 	  (he-substitute-string filename)
 	  (setq he-tried-table (cons expansion (cdr he-tried-table)))
 	  t))))

 (defvar he-file-name-chars
-  (cond ((memq system-type '(vax-vms axp-vms))
-	 "-a-zA-Z0-9_/.,~^#$+=:\\[\\]")
-	((memq system-type '(ms-dos windows-nt cygwin))
+  (cond ((memq system-type '(ms-dos windows-nt cygwin))
 	 "-a-zA-Z0-9_/.,~^#$+=:\\\\")
 	(t			    ;; More strange file formats ?
 	 "-a-zA-Z0-9_/.,~^#$+="))
@@ -516,43 +514,11 @@
 	  op
 	(point)))))

-;; Thanks go to Richard Levitte <levitte@e.kth.se> who helped to make these
-;; work under VMS, and to David Hughes <ukchugd@ukpmr.cs.philips.nl> who
+;; Thanks go to David Hughes <ukchugd@ukpmr.cs.philips.nl> who
 ;; helped to make it work on PC.
-(defun he-file-name-nondirectory (file)
-  "Fix to make `file-name-nondirectory' work for hippie-expand under VMS."
-  (if (memq system-type '(axp-vms vax-vms))
-      (let ((n (file-name-nondirectory file)))
-	(if (string-match "^\\(\\[.*\\)\\.\\([^\\.]*\\)$" n)
-	    (concat "[." (substring n (match-beginning 2) (match-end 2)))
-	  n))
-    (file-name-nondirectory file)))
-
-(defun he-file-name-directory (file)
-  "Fix to make `file-name-directory' work for hippie-expand under VMS."
-  (if (memq system-type '(axp-vms vax-vms))
-      (let ((n (file-name-nondirectory file))
-	    (d (file-name-directory file)))
-	(if (string-match "^\\(\\[.*\\)\\.\\([^\\.]*\\)$" n)
-	    (concat d (substring n (match-beginning 1) (match-end 1)) "]")
-	  d))
-    (file-name-directory file)))
-
-(defun he-file-directory-p (file)
-  "Fix to make `file-directory-p' work for hippie-expand under VMS."
-  (if (memq system-type '(vax-vms axp-vms))
-      (or (file-directory-p file)
-	  (file-directory-p (concat file "[000000]")))
-    (file-directory-p file)))
-
 (defun he-concat-directory-file-name (dir-part name-part)
   "Try to slam together two parts of a file specification, system dependently."
   (cond ((null dir-part) name-part)
-	((memq system-type '(axp-vms vax-vms))
-	 (if (and (string= (substring dir-part -1) "]")
-		  (string= (substring name-part 0 2) "[."))
-	     (concat (substring dir-part 0 -1) (substring name-part 1))
-	   (concat dir-part name-part)))
 	((memq system-type '(ms-dos w32))
 	 (if (and (string-match "\\\\" dir-part)
 		  (not (string-match "/" dir-part))
--- a/lisp/international/latexenc.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/international/latexenc.el	Thu Jul 31 05:33:56 2008 +0000
@@ -63,8 +63,6 @@
     ("cp852" . cp852) ; IBM code page 852
     ("cp858" . cp858) ; IBM code page 850 but with a euro symbol
     ("cp865" . cp865) ; IBM code page 865
-    ;; The DECMultinational charaterset used by the OpenVMS system
-    ;; ("decmulti" . undecided)
     ("latin1" . iso-8859-1)
     ("latin2" . iso-8859-2)
     ("latin3" . iso-8859-3)
--- a/lisp/international/mule.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/international/mule.el	Thu Jul 31 05:33:56 2008 +0000
@@ -1662,7 +1662,7 @@
 (defun auto-coding-alist-lookup (filename)
   "Return the coding system specified by `auto-coding-alist' for FILENAME."
   (let ((alist auto-coding-alist)
-	(case-fold-search (memq system-type '(vax-vms windows-nt ms-dos cygwin)))
+	(case-fold-search (memq system-type '(windows-nt ms-dos cygwin)))
 	coding-system)
     (while (and alist (not coding-system))
       (if (string-match (car (car alist)) filename)
--- a/lisp/loadup.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/loadup.el	Thu Jul 31 05:33:56 2008 +0000
@@ -166,9 +166,6 @@
 (message "%s" (garbage-collect))

 (load "replace")
-(if (eq system-type 'vax-vms)
-    (progn
-      (load "vmsproc")))
 (load "buff-menu")

 (if (fboundp 'x-create-frame)
@@ -187,9 +184,6 @@

 (message "%s" (garbage-collect))

-(if (eq system-type 'vax-vms)
-    (progn
-      (load "vms-patch")))
 (if (eq system-type 'windows-nt)
     (progn
       (load "w32-vars")
@@ -230,7 +224,7 @@
 ;doc strings kept in the DOC file rather than in core,
 ;you may load them with a "site-load.el" file.
 ;But you must also cause them to be scanned when the DOC file
-;is generated.  For VMS, you must edit ../vms/makedoc.com.
+;is generated.
 ;For other systems, you must edit ../src/Makefile.in.
 (if (load "site-load" t)
     (garbage-collect))
@@ -341,11 +335,7 @@

 (if (or (member (nth 3 command-line-args) '("dump" "bootstrap"))
 	(member (nth 4 command-line-args) '("dump" "bootstrap")))
-    (if (eq system-type 'vax-vms)
-	(progn
-	  (message "Dumping data as file temacs.dump")
-	  (dump-emacs "temacs.dump" "temacs")
-	  (kill-emacs))
+    (progn
       (if (memq system-type '(ms-dos windows-nt cygwin))
           (message "Dumping under the name emacs")
         (message "Dumping under the name emacs"))
--- a/lisp/ls-lisp.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/ls-lisp.el	Thu Jul 31 05:33:56 2008 +0000
@@ -30,7 +30,7 @@
 ;; This file redefines the function `insert-directory' to implement it
 ;; directly from Emacs lisp, without running ls in a subprocess.  It
 ;; is useful if you cannot afford to fork Emacs on a real memory UNIX,
-;; under VMS or other non-UNIX platforms if you don't have the ls
+;; or other non-UNIX platforms if you don't have the ls
 ;; program, or if you want a different format from what ls offers.

 ;; This function can use regexps instead of shell wildcards.  If you
--- a/lisp/mail/feedmail.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/mail/feedmail.el	Thu Jul 31 05:33:56 2008 +0000
@@ -808,30 +808,21 @@
   :type 'boolean)


-;; I provided a default for VMS because someone asked for it (the
-;; normal default doesn't work there), but, puh-lease!, it is a user
-;; definable option, so if you don't like the default, change it to
-;; whatever you want.  I am unable to directly test the VMS goop
-;; provided here by levitte@lp.se (Richard Levitte - VMS Whacker).
 (defcustom feedmail-queue-directory
-  (if (memq system-type '(axp-vms vax-vms))
-      (expand-file-name (concat (getenv "HOME") "[.MAIL.Q]"))
-    (concat (getenv "HOME") "/mail/q"))
+  (concat (getenv "HOME") "/mail/q")
   "*Name of a directory where messages will be queued.
 Directory will be created if necessary.  Should be a string that
-doesn't end with a slash.  Default, except on VMS, is \"$HOME/mail/q\"."
+doesn't end with a slash.  Default is \"$HOME/mail/q\"."
   :group 'feedmail-queue
   :type 'string
   )


 (defcustom feedmail-queue-draft-directory
-  (if (memq system-type '(axp-vms vax-vms))
-      (expand-file-name (concat (getenv "HOME") "[.MAIL.DRAFT]"))
-    (concat (getenv "HOME") "/mail/draft"))
+  (concat (getenv "HOME") "/mail/draft")
   "*Name of a directory where draft messages will be queued.
 Directory will be created if necessary.  Should be a string that
-doesn't end with a slash.  Default, except on VMS, is \"$HOME/mail/draft\"."
+doesn't end with a slash.  Default is \"$HOME/mail/draft\"."
   :group 'feedmail-queue
   :type 'string
   )
--- a/lisp/minibuffer.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/minibuffer.el	Thu Jul 31 05:33:56 2008 +0000
@@ -1068,7 +1068,7 @@
   "Current predicate used by `read-file-name-internal'.")

 (defcustom read-file-name-completion-ignore-case
-  (if (memq system-type '(ms-dos windows-nt darwin macos vax-vms axp-vms))
+  (if (memq system-type '(ms-dos windows-nt darwin))
       t nil)
   "Non-nil means when reading a file name completion ignores case."
   :group 'minibuffer
--- a/lisp/nxml/nxml-enc.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/nxml/nxml-enc.el	Thu Jul 31 05:33:56 2008 +0000
@@ -32,7 +32,7 @@
 ;;; Code:

 (defvar nxml-file-name-ignore-case
-  (memq system-type '(vax-vms windows-nt)))
+  (memq system-type '(windows-nt)))

 (defvar nxml-cached-file-name-auto-coding-regexp nil)
 (defvar nxml-cached-auto-mode-alist nil)
--- a/lisp/obsolete/vms-patch.el	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,270 +0,0 @@
-;; -*- no-byte-compile: t -*-
-;; Not byte compiled because it uses functions that are not part of
-;; emacs, so it would generate unnecessary warnings.
-;;; vms-patch.el --- override parts of files.el for VMS
-
-;; Copyright (C) 1986, 1992, 2001, 2002, 2003, 2004,
-;;   2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-
-;; Maintainer: FSF
-;; Keywords: vms
-
-;; This file is part of GNU Emacs.
-
-;; GNU Emacs is free software: you can redistribute it and/or modify
-;; it under the terms of the GNU General Public License as published by
-;; the Free Software Foundation, either version 3 of the License, or
-;; (at your option) any later version.
-
-;; GNU Emacs is distributed in the hope that it will be useful,
-;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;; GNU General Public License for more details.
-
-;; You should have received a copy of the GNU General Public License
-;; along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
-
-;;; Commentary:
-
-;;; Code:
-
-(defvar print-region-function)
-
-(setq auto-mode-alist (cons '(("\\.com\\'" . dcl-mode)) auto-mode-alist))
-
-;;; Functions that need redefinition
-
-;;; VMS file names are upper case, but buffer names are more
-;;; convenient in lower case.
-
-(defun create-file-buffer (filename)
-  "Create a suitably named buffer for visiting FILENAME, and return it.
-FILENAME (sans directory) is used unchanged if that name is free;
-otherwise a string <2> or <3> or ... is appended to get an unused name."
-  (generate-new-buffer (downcase (file-name-nondirectory filename))))
-
-;;; Given a string FN, return a similar name which is a valid VMS filename.
-;;; This is used to avoid invalid auto save file names.
-(defun make-valid-file-name (fn)
-  (setq fn (copy-sequence fn))
-  (let ((dot nil) (indx 0) (len (length fn)) chr)
-    (while (< indx len)
-      (setq chr (aref fn indx))
-      (cond
-       ((eq chr ?.) (if dot (aset fn indx ?_) (setq dot t)))
-       ((not (or (and (>= chr ?a) (<= chr ?z)) (and (>= chr ?A) (<= chr ?Z))
-		 (and (>= chr ?0) (<= chr ?9))
-		 (eq chr ?$) (eq chr ?_) (and (eq chr ?-) (> indx 0))))
-	(aset fn indx ?_)))
-      (setq indx (1+ indx))))
-  fn)
-
-(define-obsolete-function-alias 'make-legal-file-name 'make-valid-file-name "23.1")
-
-;;; Auto save filesnames start with _$ and end with $.
-
-(defun make-auto-save-file-name ()
-  "Return file name to use for auto-saves of current buffer.
-This function does not consider `auto-save-visited-file-name';
-the caller should check that before calling this function.
-This is a separate function so that your `.emacs' file or the site's
-`site-init.el' can redefine it.
-See also `auto-save-file-name-p'."
-  (if buffer-file-name
-      (concat (file-name-directory buffer-file-name)
-	      "_$"
-	      (file-name-nondirectory buffer-file-name)
-	      "$")
-    (expand-file-name (concat "_$_" (make-valid-file-name (buffer-name)) "$"))))
-
-(defun auto-save-file-name-p (filename)
-  "Return t if FILENAME can be yielded by `make-auto-save-file-name'.
-FILENAME should lack slashes.
-This is a separate function so that your `.emacs' file or the site's
-`site-init.el' can redefine it."
-  (string-match "^_\\$.*\\$" filename))
-
-;;;
-;;; This goes along with kepteditor.com which defines these logicals
-;;; If EMACS_COMMAND_ARGS is defined, it supersedes EMACS_FILE_NAME,
-;;;   which is probably set up incorrectly anyway.
-;;; The function command-line-again is a kludge, but it does the job.
-;;;
-(defun vms-suspend-resume-hook ()
-  "When resuming suspended Emacs, check for file to be found.
-If the logical name `EMACS_FILE_NAME' is defined, `find-file' that file."
-  (let ((file (vms-system-info "LOGICAL" "EMACS_FILE_NAME"))
-	(args (vms-system-info "LOGICAL" "EMACS_COMMAND_ARGS"))
-	(line (vms-system-info "LOGICAL" "EMACS_FILE_LINE")))
-    (if (not args)
-	(if file
-	    (progn (find-file file)
-		   (if line (goto-line (string-to-number line)))))
-      (cd (file-name-directory file))
-      (vms-command-line-again))))
-
-(setq suspend-resume-hook 'vms-suspend-resume-hook)
-
-(defun vms-suspend-hook ()
-  "Don't allow suspending if logical name `DONT_SUSPEND_EMACS' is defined."
-  (if (vms-system-info "LOGICAL" "DONT_SUSPEND_EMACS")
-      (error "Can't suspend this emacs"))
-  nil)
-
-(setq suspend-hook 'vms-suspend-hook)
-
-;;;
-;;; A kludge that allows reprocessing of the command line.  This is mostly
-;;;   to allow a spawned VMS mail process to do something reasonable when
-;;;   used in conjunction with the modifications to sysdep.c that allow
-;;;   Emacs to attach to a "foster" parent.
-;;;
-(defun vms-command-line-again ()
-  "Reprocess command line arguments.  VMS specific.
-Command line arguments are initialized from the logical EMACS_COMMAND_ARGS
-which is defined by kepteditor.com.  On VMS this allows attaching to a
-spawned Emacs and doing things like \"emacs -l myfile.el -f doit\""
-  (let* ((args (downcase (vms-system-info "LOGICAL" "EMACS_COMMAND_ARGS")))
-	 (command-line-args (list "emacs"))
-	 (beg 0)
-	 (end 0)
-	 (len (length args))
-	 this-char)
-    (if args
-	(progn
-;;; replace non-printable stuff with spaces
-	  (while (< beg (length args))
-	    (if (or (> 33 (setq this-char (aref args beg)))
-		    (< 127 this-char))
-		(aset args beg 32))
-	    (setq beg (1+ beg)))
-	  (setq beg (1- (length args)))
-	  (while (= 32 (aref args beg)) (setq beg (1- beg)))
-	  (setq args (substring args 0 (1+ beg)))
-	  (setq beg 0)
-;;; now start parsing args
-	  (while (< beg (length args))
-	    (while (and (< beg (length args))
-			(or (> 33 (setq this-char (aref args beg)))
-			    (< 127 this-char))
-			(setq beg (1+ beg))))
-	    (setq end (1+ beg))
-	    (while (and (< end (length args))
-			(< 32 (setq this-char (aref args end)))
-			(> 127 this-char))
-	      (setq end (1+ end)))
-	    (setq command-line-args (append
-				     command-line-args
-				     (list (substring args beg end))))
-	    (setq beg (1+ end)))
-	  (command-line)))))
-
-(defun vms-read-directory (dirname switches buffer)
-  (save-excursion
-    (set-buffer buffer)
-    (subprocess-command-to-buffer
-     (concat "DIRECTORY " switches " " dirname)
-     buffer)
-    (goto-char (point-min))
-    ;; Remove all the trailing blanks.
-    (while (search-forward " \n")
-      (forward-char -1)
-      (delete-horizontal-space))
-    (goto-char (point-min))))
-
-(setq dired-listing-switches
-      "/SIZE/DATE/OWNER/WIDTH=(FILENAME=32,SIZE=5)")
-
-(setq print-region-function
-      (lambda (start end command ign1 ign2 ign3 &rest switches)
-	 (write-region start end "sys$login:delete-me.txt")
-	 (send-command-to-subprocess
-	  1
-	  (concat command
-		  " sys$login:delete-me.txt/name=\"GNUprintbuffer\" "
-		  (mapconcat 'identity switches " "))
-	  nil nil nil)))
-
-;;;
-;;; Fuctions for using Emacs as a VMS Mail editor
-;;;
-(autoload 'vms-pmail-setup "vms-pmail"
-  "Set up file assuming use by VMS Mail utility.
-The buffer is put into text-mode, auto-save is turned off and the
-following bindings are established.
-
-\\[vms-pmail-save-and-exit]	vms-pmail-save-and-exit
-\\[vms-pmail-abort]	vms-pmail-abort
-
-All other Emacs commands are still available."
-  t)
-
-;;;
-;;; Filename handling in the minibuffer
-;;;
-(defun vms-magic-right-square-brace ()
-  "\
-Insert a right square brace, but do other things first depending on context.
-During filename completion, when point is at the end of the line and the
-character before is not a right square brace, do one of three things before
-inserting the brace:
- - If there are already two left square braces preceding, do nothing special.
- - If there is a previous right-square-brace, convert it to dot.
- - If the character before is dot, delete it.
-Additionally, if the preceding chars are right-square-brace followed by
-either \"-\" or \"..\", strip one level of directory hierarchy."
-  (interactive)
-  (when (and minibuffer-completing-file-name
-	     (= (point) (point-max))
-	     (not (= 93 (char-before))))
-    (cond
-     ;; Avoid clobbering: user:[one.path][another.path
-     ((search-backward "[" (field-beginning) t 2))
-     ((search-backward "]" (field-beginning) t)
-      (delete-char 1)
-      (insert ".")
-      (goto-char (point-max)))
-     ((= ?. (char-before))
-      (delete-char -1)))
-    (goto-char (point-max))
-    (let ((specs '(".." "-"))
-	  (pmax (point-max)))
-      (while specs
-	(let* ((up (car specs))
-	       (len (length up))
-	       (cut (- (point) len)))
-	  (when (and (< (1+ len) pmax)
-		     (= ?. (char-before cut))
-		     (string= up (buffer-substring cut (point))))
-	    (delete-char (- (1+ len)))
-	    (while (not (let ((c (char-before)))
-			  (or (= ?. c) (= 91 c))))
-	      (delete-char -1))
-	    (when (= ?. (char-before)) (delete-char -1))
-	    (setq specs nil)))
-	(setq specs (cdr specs)))))
-  (insert "]"))
-
-(defun vms-magic-colon ()
-  "\
-Insert a colon, but do other things first depending on context.
-During filename completion, when point is at the end of the line
-and the line contains a right square brace, remove all characters
-from the beginning of the line up to and including such brace.
-This enables one to type a new filespec without having to delete
-the old one."
-  (interactive)
-  (when (and minibuffer-completing-file-name
-	     (= (point) (point-max))
-             (search-backward "]" (field-beginning) t))
-    (delete-region (field-beginning) (1+ (point)))
-    (goto-char (point-max)))
-  (insert ":"))
-
-(let ((m minibuffer-local-completion-map))
-  (define-key m "]" 'vms-magic-right-square-brace)
-  (define-key m "/" 'vms-magic-right-square-brace)
-  (define-key m ":" 'vms-magic-colon))
-
-;; arch-tag: c178494e-2c37-4d02-99b7-e47e615656cf
-;;; vms-patch.el ends here
--- a/lisp/obsolete/vms-pmail.el	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,125 +0,0 @@
-;; -*- no-byte-compile: t -*-
-;; Not byte compiled because it uses functions that are not part of
-;; emacs, so it would generate unnecessary warnings.
-;;; vms-pmail.el --- use Emacs as the editor within VMS mail
-
-;; Copyright (C) 1992, 2001, 2002, 2003, 2004, 2005,
-;;   2006, 2007, 2008 Free Software Foundation, Inc.
-
-;; Author: Roland B Roberts <roberts@panix.com>
-;; Maintainer: FSF
-;; Keywords: vms
-
-;; This file is part of GNU Emacs.
-
-;; GNU Emacs is free software: you can redistribute it and/or modify
-;; it under the terms of the GNU General Public License as published by
-;; the Free Software Foundation, either version 3 of the License, or
-;; (at your option) any later version.
-
-;; GNU Emacs is distributed in the hope that it will be useful,
-;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;; GNU General Public License for more details.
-
-;; You should have received a copy of the GNU General Public License
-;; along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
-
-;;; Commentary:
-
-;;; Code:
-
-;;;
-;;; Quick hack to use emacs as mail editor.  There are a *bunch* of
-;;; changes scattered throughout emacs to make this work, namely:
-;;; (1) mod to sysdep.c to allow emacs to attach to a process other
-;;;     than the one that originally spawned it.
-;;; (2) mod to kepteditor.com to define the logical emacs_parent_pid
-;;;     which is what sysdep.c looks for, and define the logical
-;;;     emacs_command_args which contains the command line
-;;; (3) mod to re-parse command line arguments from emacs_command_args
-;;;     then execute them as though emacs were just starting up.
-;;;
-(defun vms-pmail-save-and-exit ()
-  "Save current buffer and exit Emacs.
-If this Emacs cannot be suspended, you will be prompted about modified
-buffers other than the mail buffer.  BEWARE --- suspending Emacs without
-saving your mail buffer causes mail to abort the send (potentially useful
-since the mail buffer is still here)."
-  (interactive)
-  (basic-save-buffer)
-  (if (vms-system-info "LOGICAL" "DONT_SUSPEND_EMACS")
-      (progn
-        (save-some-buffers)
-        (kill-emacs 1))
-    (kill-buffer (current-buffer))
-    (suspend-emacs)))
-
-(defun vms-pmail-abort ()
-  "Mark buffer as unmodified and exit Emacs.
-When the editor is exited without saving its buffer, VMS mail does not
-send a message.  If you have other modified buffers you will be
-prompted for what to do with them."
-  (interactive)
-  (if (not (yes-or-no-p "Really abort mail? "))
-      (ding)
-    (not-modified)
-    (if (vms-system-info "LOGICAL" "DONT_SUSPEND_EMACS")
-        (progn
-          (save-some-buffers)
-          (kill-emacs 1))
-      (kill-buffer (current-buffer))
-      (suspend-emacs))))
-
-(defun vms-pmail-setup ()
-  "Set up file assuming use by VMS MAIL utility.
-The buffer is put into text-mode, auto-save is turned off and the
-following bindings are established.
-
-\\[vms-pmail-save-and-exit]	vms-pmail-save-and-exit
-\\[vms-pmail-abort]	vms-pmail-abort
-
-All other Emacs commands are still available."
-  (interactive)
-  (auto-save-mode -1)
-  (text-mode)
-  (let ((default (vms-system-info "LOGICAL" "SYS$SCRATCH"))
-        (directory (file-name-directory (buffer-file-name)))
-        (filename (file-name-nondirectory (buffer-file-name))))
-    (if (string= directory "SYS$SCRATCH:")
-        (progn
-          (cd default)
-          (setq buffer-file-name (concat default filename))))
-    (use-local-map (copy-keymap (current-local-map)))
-    (local-set-key "\C-c\C-c" 'vms-pmail-save-and-exit)
-    (local-set-key "\C-c\C-g" 'vms-pmail-abort)))
-
-(defun indicate-mail-reply-text ()
-  "Prepares received mail for re-sending by placing >'s on each line."
-  (interactive)
-  (goto-char (point-min))
-  (while (not (eobp))
-    (insert ">")
-    (beginning-of-line)
-    (forward-line 1))
-  (set-buffer-modified-p nil)
-  (goto-char (point-min)))
-
-(defun insert-signature ()
-  "Moves to the end of the buffer and inserts a \"signature\" file.
-First try the file indicated by environment variable MAIL$TRAILER.
-If that fails, try the file \"~/.signature\".
-If neither file exists, fails quietly."
-  (interactive)
-  (goto-char (point-max))
-  (newline)
-  (if (vms-system-info "LOGICAL" "MAIL$TRAILER")
-      (if (file-attributes (vms-system-info "LOGICAL" "MAIL$TRAILER"))
-	  (insert-file-contents (vms-system-info "LOGICAL" "MAIL$TRAILER"))
-	(if (file-attributes "~/.signature")
-	    (insert-file-contents "~/.signature")))))
-
-(provide 'vms-pmail)
-
-;; arch-tag: 336850fc-7812-4663-8e4d-b9c13f47dce1
-;;; vms-pmail.el ends here
--- a/lisp/obsolete/vmsproc.el	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,148 +0,0 @@
-;; -*- no-byte-compile: t -*-
-;; Not byte compiled because it uses functions that are not part of
-;; emacs, so it would generate unnecessary warnings.
-;;; vmsproc.el --- run asynchronous VMS subprocesses under Emacs
-
-;; Copyright (C) 1986, 2001, 2002, 2003, 2004, 2005,
-;;   2006, 2007, 2008 Free Software Foundation, Inc.
-
-;; Author: Mukesh Prasad
-;; Maintainer: FSF
-;; Keywords: vms
-
-;; This file is part of GNU Emacs.
-
-;; GNU Emacs is free software: you can redistribute it and/or modify
-;; it under the terms of the GNU General Public License as published by
-;; the Free Software Foundation, either version 3 of the License, or
-;; (at your option) any later version.
-
-;; GNU Emacs is distributed in the hope that it will be useful,
-;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;; GNU General Public License for more details.
-
-;; You should have received a copy of the GNU General Public License
-;; along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
-
-;;; Commentary:
-
-;;; Code:
-
-(defvar display-subprocess-window nil
-  "If non-nil, the subprocess window is displayed whenever input is received.")
-
-(defvar command-prefix-string "$ "
-  "String to insert to distinguish commands entered by user.")
-
-(defvar subprocess-running nil)
-(defvar subprocess-buf nil)
-
-(defvar command-mode-map
-  (let ((map (make-sparse-keymap)))
-    (define-key map "\C-m" 'command-send-input)
-    (define-key map "\C-u" 'command-kill-line)
-    map))
-
-(defun subprocess-input (name str)
-  "Handle input from a subprocess.  Called by Emacs."
-  (if display-subprocess-window
-      (display-buffer subprocess-buf))
-  (with-current-buffer subprocess-buf
-    (goto-char (point-max))
-    (insert str ?\n)))
-
-(defun subprocess-exit (name)
-  "Called by Emacs upon subprocess exit."
-  (setq subprocess-running nil))
-
-(defun start-subprocess ()
-  "Spawn an asynchronous subprocess with output redirected to
-the buffer *COMMAND*.  Within this buffer, use C-m to send
-the last line to the subprocess or to bring another line to
-the end."
-  (if subprocess-running
-      (return t))
-  (setq subprocess-buf (get-buffer-create "*COMMAND*"))
-  (with-current-buffer subprocess-buf
-    (use-local-map command-mode-map))
-  (setq subprocess-running (spawn-subprocess 1 'subprocess-input
-					     'subprocess-exit))
-  ;; Initialize subprocess so it doesn't panic and die upon
-  ;; encountering the first error.
-  (and subprocess-running
-       (send-command-to-subprocess 1 "ON SEVERE_ERROR THEN CONTINUE")))
-
-(defun subprocess-command-to-buffer (command buffer)
-  "Execute COMMAND and redirect output into BUFFER."
-  (let (cmd args)
-    (setq cmd (substring command 0 (string-match " " command)))
-    (setq args (substring command (string-match " " command)))
-    (call-process cmd nil buffer nil "*dcl*" args)))
-  ;; BUGS: only the output up to the end of the first image activation is trapped.
-  ;; (if (not subprocess-running)
-  ;;     (start-subprocess))
-  ;; (with-current-buffer buffer
-  ;;   (let ((output-filename (concat "SYS$SCRATCH:OUTPUT-FOR-"
-  ;;       			   (getenv "USER") ".LISTING")))
-  ;;     (while (file-exists-p output-filename)
-  ;;       (delete-file output-filename))
-  ;;     (define-logical-name "SYS$OUTPUT" (concat output-filename "-NEW"))
-  ;;     (send-command-to-subprocess 1 command)
-  ;;     (send-command-to-subprocess 1 (concat
-  ;;       			     "RENAME " output-filename
-  ;;       			     "-NEW " output-filename))
-  ;;     (while (not (file-exists-p output-filename))
-  ;;       (sleep-for 1))
-  ;;     (define-logical-name "SYS$OUTPUT" nil)
-  ;;     (insert-file output-filename)
-  ;;     (delete-file output-filename))))
-
-(defun subprocess-command ()
-  "Start asynchronous subprocess if not running and switch to its window."
-  (interactive)
-  (if (not subprocess-running)
-      (start-subprocess))
-  (and subprocess-running
-       (progn (pop-to-buffer subprocess-buf) (goto-char (point-max)))))
-
-(defun command-send-input ()
-  "If at last line of buffer, send the current line to
-the spawned subprocess.  Otherwise bring back current
-line to the last line for resubmission."
-  (interactive)
-  (beginning-of-line)
-  (let ((current-line (buffer-substring (point) (line-end-position))))
-    (if (eobp)
-	(progn
-	  (if (not subprocess-running)
-	      (start-subprocess))
-	  (if subprocess-running
-	      (progn
-		(beginning-of-line)
-		(send-command-to-subprocess 1 current-line)
-		(if command-prefix-string
-		    (progn (beginning-of-line) (insert command-prefix-string)))
-		(forward-line 1))))
-      ;; else -- if not at last line in buffer
-      (goto-char (point-max))
-      (backward-char)
-      (forward-line 1)
-      (insert
-       (if (compare-strings command-prefix-string nil nil
-                            current-line 0 (length command-prefix-string))
-           (substring current-line (length command-prefix-string))
-         current-line)))))
-
-(defun command-kill-line ()
-  "Kill the current line.  Used in command mode."
-  (interactive)
-  (beginning-of-line)
-  (kill-line))
-
-(define-key esc-map "$" 'subprocess-command)
-
-(provide 'vmsproc)
-
-;; arch-tag: 600b2512-f903-4887-bcd2-e76b306f5b66
-;;; vmsproc.el ends here
--- a/lisp/paths.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/paths.el	Thu Jul 31 05:33:56 2008 +0000
@@ -176,15 +176,13 @@
   :group 'environment
   :type 'file)

-(defvar term-file-prefix (if (eq system-type 'vax-vms) "[.term]" "term/") "\
+(defvar term-file-prefix "term/" "\
 If non-nil, Emacs startup does (load (concat term-file-prefix (getenv \"TERM\")))
 You may set this variable to nil in your `.emacs' file if you do not wish
 the terminal-initialization file to be loaded.")

 (defvar abbrev-file-name
-  (if (eq system-type 'vax-vms)
-      "~/abbrev.def"
-    (convert-standard-filename "~/.abbrev_defs"))
+  (convert-standard-filename "~/.abbrev_defs")
   "*Default name of file to read abbrevs from.")

 ;; arch-tag: bae27ffb-9944-4c87-b569-30d4635a99e1
--- a/lisp/printing.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/printing.el	Thu Jul 31 05:33:56 2008 +0000
@@ -2214,7 +2214,6 @@
      (file-name-as-directory
       (or (getenv "TMPDIR") (getenv "TMP") (getenv "TEMP")
 	  (cond (ps-windows-system "c:/temp")
-		((memq system-type '(vax-vms axp-vms)) "SYS$SCRATCH:")
 		(t "/tmp")
 		)))))
   "*Specify a directory for temporary files during printing.
--- a/lisp/recentf.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/recentf.el	Thu Jul 31 05:33:56 2008 +0000
@@ -300,7 +300,7 @@
 ;;; Utilities
 ;;
 (defconst recentf-case-fold-search
-  (memq system-type '(vax-vms windows-nt cygwin))
+  (memq system-type '(windows-nt cygwin))
   "Non-nil if recentf searches and matches should ignore case.")

 (defsubst recentf-string-equal (s1 s2)
--- a/lisp/shadowfile.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/shadowfile.el	Thu Jul 31 05:33:56 2008 +0000
@@ -762,7 +762,7 @@
 				(buffer-list))))
 	   (yes-or-no-p "Modified buffers exist; exit anyway? "))
        (or (not (fboundp 'process-list))
-	   ;; process-list is not defined on VMS.
+	   ;; process-list is not defined on MSDOS.
 	   (let ((processes (process-list))
 		 active)
 	     (while processes
--- a/lisp/sort.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/sort.el	Thu Jul 31 05:33:56 2008 +0000
@@ -491,7 +491,7 @@
       (setq col-end (max col-beg1 col-end1))
       (if (search-backward "\t" beg1 t)
 	  (error "sort-columns does not work with tabs -- use M-x untabify"))
-      (if (not (or (memq system-type '(vax-vms windows-nt))
+      (if (not (or (memq system-type '(windows-nt))
 		   (let ((pos beg1) plist fontified)
 		     (catch 'found
 		       (while (< pos end1)
@@ -516,7 +516,7 @@
 	    (when sort-fold-case
 	      (push "-f" sort-args))
 	    (apply #'call-process-region beg1 end1 "sort" t t nil sort-args))
-	;; On VMS and ms-windows, use Emacs's own facilities.
+	;; On ms-windows, use Emacs's own facilities.
 	(save-excursion
 	  (save-restriction
 	    (narrow-to-region beg1 end1)
--- a/lisp/startup.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/startup.el	Thu Jul 31 05:33:56 2008 +0000
@@ -491,20 +491,19 @@
         ;; the end, because the subdirs.el files may add elements to the end
         ;; of load-path and we want to take it into account.
         (setq tail (cdr tail))))
-    (unless (eq system-type 'vax-vms)
-      ;; If the PWD environment variable isn't accurate, delete it.
-      (let ((pwd (getenv "PWD")))
-	(and (stringp pwd)
-	     ;; Use FOO/., so that if FOO is a symlink, file-attributes
-	     ;; describes the directory linked to, not FOO itself.
-	     (or (equal (file-attributes
-			 (concat (file-name-as-directory pwd) "."))
-			(file-attributes
-			 (concat (file-name-as-directory default-directory)
-				 ".")))
-		 (setq process-environment
-		       (delete (concat "PWD=" pwd)
-			       process-environment))))))
+    ;; If the PWD environment variable isn't accurate, delete it.
+    (let ((pwd (getenv "PWD")))
+      (and (stringp pwd)
+	   ;; Use FOO/., so that if FOO is a symlink, file-attributes
+	   ;; describes the directory linked to, not FOO itself.
+	   (or (equal (file-attributes
+		       (concat (file-name-as-directory pwd) "."))
+		      (file-attributes
+		       (concat (file-name-as-directory default-directory)
+			       ".")))
+	       (setq process-environment
+		     (delete (concat "PWD=" pwd)
+			     process-environment)))))
     (setq default-directory (abbreviate-file-name default-directory))
     (let ((menubar-bindings-done nil))
       (unwind-protect
@@ -1007,8 +1006,6 @@
 				   "~/_emacs"
 				 ;; But default to .emacs if _emacs does not exist.
 				 "~/.emacs")))
-			    ((eq system-type 'vax-vms)
-			     "sys$login:.emacs")
 			    (t
 			     (concat "~" init-file-user "/.emacs")))))
 		      ;; This tells `load' to store the file name found
--- a/lisp/subr.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/subr.el	Thu Jul 31 05:33:56 2008 +0000
@@ -2406,14 +2406,10 @@
 Wildcards and redirection are handled as usual in the shell.

 \(fn NAME BUFFER COMMAND &rest COMMAND-ARGS)"
-  (cond
-   ((eq system-type 'vax-vms)
-    (apply 'start-process name buffer args))
    ;; We used to use `exec' to replace the shell with the command,
    ;; but that failed to handle (...) and semicolon, etc.
-   (t
-    (start-process name buffer shell-file-name shell-command-switch
-		   (mapconcat 'identity args " ")))))
+  (start-process name buffer shell-file-name shell-command-switch
+		 (mapconcat 'identity args " ")))

 (defun start-file-process-shell-command (name buffer &rest args)
   "Start a program in a subprocess.  Return the process object for it.
@@ -2445,16 +2441,12 @@
 Otherwise it waits for COMMAND to terminate and returns a numeric exit
 status or a signal description string.
 If you quit, the process is killed with SIGINT, or SIGKILL if you quit again."
-  (cond
-   ((eq system-type 'vax-vms)
-    (apply 'call-process command infile buffer display args))
-   ;; We used to use `exec' to replace the shell with the command,
-   ;; but that failed to handle (...) and semicolon, etc.
-   (t
-    (call-process shell-file-name
-		  infile buffer display
-		  shell-command-switch
-		  (mapconcat 'identity (cons command args) " ")))))
+  ;; We used to use `exec' to replace the shell with the command,
+  ;; but that failed to handle (...) and semicolon, etc.
+  (call-process shell-file-name
+		infile buffer display
+		shell-command-switch
+		(mapconcat 'identity (cons command args) " ")))

 (defun process-file-shell-command (command &optional infile buffer display
 					   &rest args)
--- a/lisp/textmodes/texinfmt.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/textmodes/texinfmt.el	Thu Jul 31 05:33:56 2008 +0000
@@ -2963,29 +2963,6 @@
     ("ky" . texinfo-format-kindex)))


-;;; Sort and index (for VMS)
-
-;; Sort an index which is in the current buffer between START and END.
-;; Used on VMS, where the `sort' utility is not available.
-(defun texinfo-sort-region (start end)
-  (require 'sort)
-  (save-restriction
-    (narrow-to-region start end)
-    (goto-char (point-min))
-    (sort-subr nil 'forward-line 'end-of-line 'texinfo-sort-startkeyfun)))
-
-;; Subroutine for sorting an index.
-;; At start of a line, return a string to sort the line under.
-(defun texinfo-sort-startkeyfun ()
-  (let ((line (buffer-substring-no-properties (point) (line-end-position))))
-    ;; Canonicalize whitespace and eliminate funny chars.
-    (while (string-match "[ \t][ \t]+\\|[^a-z0-9 ]+" line)
-      (setq line (concat (substring line 0 (match-beginning 0))
-                         " "
-                         (substring line (match-end 0)))))
-    line))
-
-
 ;;; @printindex

 (put 'printindex 'texinfo-format 'texinfo-format-printindex)
@@ -3002,9 +2979,7 @@
     (insert "\n* Menu:\n\n")
     (setq opoint (point))
     (texinfo-print-index nil indexelts)
-    (if (memq system-type '(vax-vms windows-nt ms-dos))
-        (texinfo-sort-region opoint (point))
-      (shell-command-on-region opoint (point) "sort -fd" 1))))
+    (shell-command-on-region opoint (point) "sort -fd" 1)))

 (defun texinfo-print-index (file indexelts)
   (while indexelts
--- a/lisp/version.el	Thu Jul 31 02:47:32 2008 +0000
+++ b/lisp/version.el	Thu Jul 31 05:33:56 2008 +0000
@@ -85,7 +85,7 @@
 (defalias 'version 'emacs-version)

 ;; We put version info into the executable in the form that `ident' uses.
-(or (memq system-type '(vax-vms windows-nt))
+(or (eq system-type 'windows-nt)
     (purecopy (concat "\n$Id: " (subst-char-in-string ?\n ?\s (emacs-version))
 		      " $\n")))
--- a/make-dist	Thu Jul 31 02:47:32 2008 +0000
+++ b/make-dist	Thu Jul 31 05:33:56 2008 +0000
@@ -337,7 +337,7 @@
 	      etc/images/smilies/medium etc/images/tree-widget \
 	      etc/images/tree-widget/default etc/images/tree-widget/folder \
 	      etc/refcards etc/schema etc/tutorials info doc doc/emacs \
-	      doc/misc doc/man doc/lispref doc/lispintro m4 msdos vms \
+	      doc/misc doc/man doc/lispref doc/lispintro m4 msdos \
 	      nextstep nextstep/Cocoa nextstep/Cocoa/Emacs.base \
 	      nextstep/Cocoa/Emacs.base/Contents \
 	      nextstep/Cocoa/Emacs.base/Contents/Resources \
@@ -578,8 +578,7 @@
 echo "Making links to \`oldXMenu'"
 (cd oldXMenu
  ln *.c *.h *.in ../${tempdir}/oldXMenu
- ln README ChangeLog ../${tempdir}/oldXMenu
- ln compile.com descrip.mms ../${tempdir}/oldXMenu)
+ ln README ChangeLog ../${tempdir}/oldXMenu)

 echo "Making links to \`lwlib'"
 (cd lwlib
@@ -728,12 +727,6 @@
 (cd doc/man
  ln *.1 ../../${tempdir}/doc/man)

-echo "Making links to \`vms'"
-(cd vms
- test -f README && ln README ../${tempdir}/vms
- cd ../${tempdir}/vms
- rm -f *~)
-
 ### It would be nice if they could all be symlinks to top-level copy, but
 ### you're not supposed to have any symlinks in distribution tar files.
 echo "Making sure copying notices are all copies of \`COPYING'"
--- a/oldXMenu/ChangeLog	Thu Jul 31 02:47:32 2008 +0000
+++ b/oldXMenu/ChangeLog	Thu Jul 31 05:33:56 2008 +0000
@@ -1,3 +1,9 @@
+2008-07-31  Dan Nicolaescu  <dann@ics.uci.edu>
+
+	* descrip.mms:
+	* compile.com: Remove file.
+	* Create.c: Remove VMS support.
+
 2008-07-23  Dan Nicolaescu  <dann@ics.uci.edu>

 	* Makefile.in (ALL_CFLAGS): Remove reference to C_SWITCH_SITE.
--- a/oldXMenu/Create.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/oldXMenu/Create.c	Thu Jul 31 05:33:56 2008 +0000
@@ -50,7 +50,6 @@
 #include "../src/bitmaps/stipple.xbm"

 #else
-#ifndef VMS

 #include <X11/bitmaps/dimple1>
 #include <X11/bitmaps/dimple3>
@@ -66,23 +65,6 @@
 #include <X11/bitmaps/cntr_ptrmsk>
 #include <X11/bitmaps/stipple>

-#else
-
-#include "[-.src.bitmaps]dimple1.xbm"
-#include "[-.src.bitmaps]dimple3.xbm"
-#include "[-.src.bitmaps]gray1.xbm"
-#include "[-.src.bitmaps]gray3.xbm"
-#include "[-.src.bitmaps]crosswv.xbm"
-
-#include "[-.src.bitmaps]leftptr.xbm"
-#include "[-.src.bitmaps]leftpmsk.xbm"
-#include "[-.src.bitmaps]rtptr.xbm"
-#include "[-.src.bitmaps]rtpmsk.xbm"
-#include "[-.src.bitmaps]cntrptr.xbm"
-#include "[-.src.bitmaps]cntrpmsk.xbm"
-#include "[-.src.bitmaps]stipple.xbm"
-
-#endif /* VMS */
 #endif /* not EMACS_BITMAP_FILES */

 #define DEF_FREEZE		0
--- a/oldXMenu/compile.com	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,66 +0,0 @@
-$! This file was autogenerated with the command:
-$!
-$!	mms/noaction/output = compile.com
-$ if f$search("ACTIVATE.OBJ") then delete ACTIVATE.OBJ.*
-$ cc /obj=ACTIVATE.OBJ /NOLIST/OBJECT=ACTIVATE.OBJ ACTIVATE.c
-$ if f$search("ADDPANE.OBJ") then delete ADDPANE.OBJ.*
-$ cc /obj=ADDPANE.OBJ /NOLIST/OBJECT=ADDPANE.OBJ ADDPANE.c
-$ if f$search("ADDSEL.OBJ") then delete ADDSEL.OBJ.*
-$ cc /obj=ADDSEL.OBJ /NOLIST/OBJECT=ADDSEL.OBJ ADDSEL.c
-$ if f$search("CHGPANE.OBJ") then delete CHGPANE.OBJ.*
-$ cc /obj=CHGPANE.OBJ /NOLIST/OBJECT=CHGPANE.OBJ CHGPANE.c
-$ if f$search("CHGSEL.OBJ") then delete CHGSEL.OBJ.*
-$ cc /obj=CHGSEL.OBJ /NOLIST/OBJECT=CHGSEL.OBJ CHGSEL.c
-$ if f$search("CREATE.OBJ") then delete CREATE.OBJ.*
-$ cc /obj=CREATE.OBJ /NOLIST/OBJECT=CREATE.OBJ CREATE.c
-$ if f$search("DELPANE.OBJ") then delete DELPANE.OBJ.*
-$ cc /obj=DELPANE.OBJ /NOLIST/OBJECT=DELPANE.OBJ DELPANE.c
-$ if f$search("DELSEL.OBJ") then delete DELSEL.OBJ.*
-$ cc /obj=DELSEL.OBJ /NOLIST/OBJECT=DELSEL.OBJ DELSEL.c
-$ if f$search("DESTROY.OBJ") then delete DESTROY.OBJ.*
-$ cc /obj=DESTROY.OBJ /NOLIST/OBJECT=DESTROY.OBJ DESTROY.c
-$ if f$search("ERROR.OBJ") then delete ERROR.OBJ.*
-$ cc /obj=ERROR.OBJ /NOLIST/OBJECT=ERROR.OBJ ERROR.c
-$ if f$search("EVHAND.OBJ") then delete EVHAND.OBJ.*
-$ cc /obj=EVHAND.OBJ /NOLIST/OBJECT=EVHAND.OBJ EVHAND.c
-$ if f$search("FINDPANE.OBJ") then delete FINDPANE.OBJ.*
-$ cc /obj=FINDPANE.OBJ /NOLIST/OBJECT=FINDPANE.OBJ FINDPANE.c
-$ if f$search("FINDSEL.OBJ") then delete FINDSEL.OBJ.*
-$ cc /obj=FINDSEL.OBJ /NOLIST/OBJECT=FINDSEL.OBJ FINDSEL.c
-$ if f$search("INSPANE.OBJ") then delete INSPANE.OBJ.*
-$ cc /obj=INSPANE.OBJ /NOLIST/OBJECT=INSPANE.OBJ INSPANE.c
-$ if f$search("INSSEL.OBJ") then delete INSSEL.OBJ.*
-$ cc /obj=INSSEL.OBJ /NOLIST/OBJECT=INSSEL.OBJ INSSEL.c
-$ if f$search("INTERNAL.OBJ") then delete INTERNAL.OBJ.*
-$ cc /obj=INTERNAL.OBJ /NOLIST/OBJECT=INTERNAL.OBJ INTERNAL.c
-$ if f$search("LOCATE.OBJ") then delete LOCATE.OBJ.*
-$ cc /obj=LOCATE.OBJ /NOLIST/OBJECT=LOCATE.OBJ LOCATE.c
-$ if f$search("POST.OBJ") then delete POST.OBJ.*
-$ cc /obj=POST.OBJ /NOLIST/OBJECT=POST.OBJ POST.c
-$ if f$search("RECOMP.OBJ") then delete RECOMP.OBJ.*
-$ cc /obj=RECOMP.OBJ /NOLIST/OBJECT=RECOMP.OBJ RECOMP.c
-$ if f$search("SETAEQ.OBJ") then delete SETAEQ.OBJ.*
-$ cc /obj=SETAEQ.OBJ /NOLIST/OBJECT=SETAEQ.OBJ SETAEQ.c
-$ if f$search("SETFRZ.OBJ") then delete SETFRZ.OBJ.*
-$ cc /obj=SETFRZ.OBJ /NOLIST/OBJECT=SETFRZ.OBJ SETFRZ.c
-$ if f$search("SETPANE.OBJ") then delete SETPANE.OBJ.*
-$ cc /obj=SETPANE.OBJ /NOLIST/OBJECT=SETPANE.OBJ SETPANE.c
-$ if f$search("SETSEL.OBJ") then delete SETSEL.OBJ.*
-$ cc /obj=SETSEL.OBJ /NOLIST/OBJECT=SETSEL.OBJ SETSEL.c
-$ if f$search("XDELASSOC.OBJ") then delete XDELASSOC.OBJ.*
-$ cc /obj=XDELASSOC.OBJ /NOLIST/OBJECT=XDELASSOC.OBJ XDELASSOC.c
-$ if f$search("XLOOKASSOC.OBJ") then delete XLOOKASSOC.OBJ.*
-$ cc /obj=XLOOKASSOC.OBJ /NOLIST/OBJECT=XLOOKASSOC.OBJ XLOOKASSOC.c
-$ if f$search("XCRASSOC.OBJ") then delete XCRASSOC.OBJ.*
-$ cc /obj=XCRASSOC.OBJ /NOLIST/OBJECT=XCRASSOC.OBJ XCRASSOC.c
-$ if f$search("XDESTASSOC.OBJ") then delete XDESTASSOC.OBJ.*
-$ cc /obj=XDESTASSOC.OBJ /NOLIST/OBJECT=XDESTASSOC.OBJ XDESTASSOC.c
-$ if f$search("XMAKEASSOC.OBJ") then delete XMAKEASSOC.OBJ.*
-$ cc /obj=XMAKEASSOC.OBJ /NOLIST/OBJECT=XMAKEASSOC.OBJ XMAKEASSOC.c
-$ if f$search("INSQUE.OBJ") then delete INSQUE.OBJ.*
-$ cc /obj=INSQUE.OBJ /NOLIST/OBJECT=INSQUE.OBJ INSQUE.c
-$ if f$search("LIBXMENU11.OLB") then delete LIBXMENU11.OLB.*
-$ library/insert/create LIBXMENU11.OLB Activate.obj, 	AddPane.obj, 	AddSel.obj, 	ChgPane.obj, 	ChgSel.obj, 	Create.obj, 	DelPane.obj, 	DelSel.obj, 	Destroy.obj, 	Error.obj, 	EvHand.obj, 	FindPane.obj, 	FindSel.obj, 	InsPane.obj, 	InsSel.obj, 	Internal.-
-obj, 	Locate.obj, 	Post.obj, 	Recomp.obj, 	SetAEQ.obj, 	SetFrz.obj, 	SetPane.obj, 	SetSel.obj,         XDelAssoc.obj, XLookAssoc.obj, XCrAssoc.obj, XDestAssoc.obj,         XMakeAssoc.obj
-$ if ("insque.obj" .nes. "") then library/insert LIBXMENU11.OLB insque.obj
-$ !
--- a/oldXMenu/descrip.mms	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,111 +0,0 @@
-### descrip.mms - port of oldXMenu Makefile to VMS
-
-## Copyright (C) 1993, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
-##   2008  Free Software Foundation, Inc.
-
-## Author: Richard Levitte
-
-## This program is free software: you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation, either version 3 of the License, or
-## (at your option) any later version.
-
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-
-## You should have received a copy of the GNU General Public License
-## along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-
-### Code:
-
-!# Uncomment following line if linking temacs complains about missing insque.
-EXTRA=insque.obj
-
-AS = as
-CC = cc
-LD = link
-TAGS = etags
-RM = delete
-MV = rename
-AR = library/insert
-MAKE = mms
-STD_DEFINES =
-CDEBUGFLAGS = /debug/noopt
-RM_CMD = $(RM) *.BAK.*, *.obj.*
-
-SRCS =  Activate.c, -
-	AddPane.c, -
-	AddSel.c, -
-	ChgPane.c, -
-	ChgSel.c, -
-	Create.c, -
-	DelPane.c, -
-	DelSel.c, -
-	Destroy.c, -
-	Error.c, -
-	EvHand.c, -
-	FindPane.c, -
-	FindSel.c, -
-	InsPane.c, -
-	InsSel.c, -
-	Internal.c, -
-	Locate.c, -
-	Post.c, -
-	Recomp.c, -
-	SetAEQ.c, -
-	SetFrz.c, -
-	SetPane.c, -
-	SetSel.c, -
-        XDelAssoc.c, XLookAssoc.c, XCrAssoc.c, XDestAssoc.c, XMakeAssoc.c
-
-OBJS =  Activate.obj, -
-	AddPane.obj, -
-	AddSel.obj, -
-	ChgPane.obj, -
-	ChgSel.obj, -
-	Create.obj, -
-	DelPane.obj, -
-	DelSel.obj, -
-	Destroy.obj, -
-	Error.obj, -
-	EvHand.obj, -
-	FindPane.obj, -
-	FindSel.obj, -
-	InsPane.obj, -
-	InsSel.obj, -
-	Internal.obj, -
-	Locate.obj, -
-	Post.obj, -
-	Recomp.obj, -
-	SetAEQ.obj, -
-	SetFrz.obj, -
-	SetPane.obj, -
-	SetSel.obj, -
-        XDelAssoc.obj, XLookAssoc.obj, XCrAssoc.obj, XDestAssoc.obj, -
-        XMakeAssoc.obj
-
-.c.obj :
-	if f$search("$@") then $(RM) $@.*
-	$(CC) /obj=$@ $(CFLAGS) $*.c
-
-all :: libXMenu11.olb
-	!
-
-libXMenu11.olb : $(OBJS) $(EXTRA)
-	if f$search("$@") then $(RM) $@.*
-	$(AR)/create $@ $(OBJS)
-	if ("$(EXTRA)" .nes. "") then $(AR) $@ $(EXTRA)
-#If running ranlib fails, probably there is none.
-#That's ok.  So don't stop the build.
-
-distclean : clean
-	!
-
-clean ::
-	$(RM_CMD) \#* libXMenu11.a *.obj,
-tags ::
-	$(TAGS) -t *.[ch]
-
--- a/src/ChangeLog	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/ChangeLog	Thu Jul 31 05:33:56 2008 +0000
@@ -1,3 +1,42 @@
+2008-07-31  Dan Nicolaescu  <dann@ics.uci.edu>
+
+	* bitmaps/README:
+	* xfns.c:
+	* termcap.c:
+	* term.c:
+	* syswait.h:
+	* systty.h:
+	* systime.h:
+	* syssignal.h:
+	* sysdep.c:
+	* process.h:
+	* process.c:
+	* print.c:
+	* ndir.h:
+	* lread.c:
+	* keyboard.c:
+	* getpagesize.h:
+	* floatfns.c:
+	* fileio.c:
+	* emacs.c:
+	* doc.c:
+	* dispnew.c:
+	* dired.c:
+	* data.c:
+	* callproc.c:
+	* buffer.c:
+	* README:
+	* Makefile.in:
+	* s/template.h:
+	* s/msdos.h:
+	* m/vax.h: Remove VMS support.
+	* s/vms.h:
+	* vlimit.h:
+	* uaf.h:
+	* temacs.opt:
+	* param.h:
+	* ioctl.h: Remove file.
+
 2008-07-31  Dan Nicolaescu  <dann@ics.uci.edu>

 	* s/ms-w32.h (MULTI_KBOARD): Remove.
--- a/src/Makefile.in	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/Makefile.in	Thu Jul 31 05:33:56 2008 +0000
@@ -622,12 +622,6 @@
 #endif
 #endif

-#ifdef VMS
-#define VMS_SUPPORT ${lispsource}vmsproc.elc ${lispsource}vms-patch.elc
-#else
-#define VMS_SUPPORT
-#endif
-
 #ifdef MSDOS
 #define MSDOS_SUPPORT ${lispsource}ls-lisp.elc ${lispsource}disp-table.elc \
  ${lispsource}dos-fns.elc ${lispsource}dos-w32.elc ${lispsource}dos-vars.elc \
@@ -762,7 +756,6 @@
 	${lispsource}ediff-hook.elc \
 	${lispsource}epa-hook.elc \
 	TOOLTIP_SUPPORT \
-	VMS_SUPPORT \
 	MSDOS_SUPPORT \
 	WINNT_SUPPORT \
 	WINDOW_SUPPORT \
@@ -864,7 +857,6 @@
    for the sake of systems which can''t handle large ones.  */
 SOME_MACHINE_LISP = ../lisp/mouse.elc \
   ../lisp/select.elc ../lisp/scroll-bar.elc \
-  VMS_SUPPORT \
   ../lisp/ls-lisp.elc ../lisp/dos-fns.elc \
   ../lisp/w32-fns.elc ../lisp/dos-w32.elc \
   ../lisp/disp-table.elc ../lisp/dos-vars.elc \
--- a/src/README	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/README	Thu Jul 31 05:33:56 2008 +0000
@@ -5,8 +5,7 @@

 This directory contains the source files for the C component of GNU Emacs.
 Nothing in this directory is needed for using Emacs once it is built
-and installed, if the dumped Emacs (on Unix systems) or the Emacs
-executable and map files (on VMS systems) are copied elsewhere.
+and installed, if the dumped Emacs (on Unix systems) is copied elsewhere.

 See the files ../README and then ../INSTALL for installation instructions.

@@ -18,20 +17,6 @@
 transparently to the user; you should only need to run `../configure',
 and then type `make'.

-See the file VMSBUILD in this directory for instructions on compiling,
-linking and building Emacs on VMS.
-
-The files `*.com' and `temacs.opt' are used on VMS only.
-The files `vlimit.h', `ioclt.h' and `param.h' are stubs to
-allow compilation on VMS with the minimum amount of #ifdefs.
-
-`uaf.h' contains VMS uaf structure definitions.  This is only needed if
-you define READ_SYSUAF.  This should only be done for single-user
-systems where you are not overly concerned with security, since it
-either requires that you install Emacs with SYSPRV or make SYSUAF.DAT
-world readable.  Otherwise, Emacs can determine information about the
-current user, but no one else.
-

 This file is part of GNU Emacs.
--- a/src/bitmaps/README	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/bitmaps/README	Thu Jul 31 05:33:56 2008 +0000
@@ -1,6 +1,5 @@
 This directory contains bitmap files that Emacs uses from
-/usr/include/X11/bitmaps.  That directory doesn't seem to exist under
-VMS.
+/usr/include/X11/bitmaps.


 COPYRIGHT AND LICENSE INFORMATION
--- a/src/buffer.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/buffer.c	Thu Jul 31 05:33:56 2008 +0000
@@ -5312,7 +5312,6 @@
   if (!pwd)
     fatal ("`get_current_dir_name' failed: %s\n", strerror (errno));

-#ifndef VMS
   /* Maybe this should really use some standard subroutine
      whose definition is filename syntax dependent.  */
   len = strlen (pwd);
@@ -5323,7 +5322,6 @@
       pwd[len] = DIRECTORY_SEP;
       pwd[len + 1] = '\0';
     }
-#endif /* not VMS */

   current_buffer->directory = make_unibyte_string (pwd, strlen (pwd));
   if (! NILP (buffer_defaults.enable_multibyte_characters))
--- a/src/callproc.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/callproc.c	Thu Jul 31 05:33:56 2008 +0000
@@ -90,13 +90,9 @@
 #include "msdos.h"
 #endif

-#ifdef VMS
-extern noshare char **environ;
-#else
 #ifndef USE_CRT_DLL
 extern char **environ;
 #endif
-#endif

 #ifdef HAVE_SETPGID
 #if !defined (USG) || defined (BSD_PGRPS)
@@ -142,8 +138,6 @@

 EXFUN (Fgetenv_internal, 2);

-#ifndef VMS  /* VMS version is in vmsproc.c.  */
-
 static Lisp_Object
 call_process_kill (fdpid)
      Lisp_Object fdpid;
@@ -843,7 +837,6 @@
 					 Vlocale_coding_system, 0);
   return make_number (synch_process_retcode);
 }
-#endif

 static Lisp_Object
 delete_temp_file (name)
@@ -999,8 +992,6 @@
   RETURN_UNGCPRO (unbind_to (count, Fcall_process (nargs, args)));
 }

-#ifndef VMS /* VMS version is in vmsproc.c.  */
-
 static int relocate_fd ();

 static char **
@@ -1448,7 +1439,6 @@
     return 0;
 }

-#endif /* not VMS */

 /* This is run before init_cmdargs.  */

@@ -1551,16 +1541,9 @@
     dir_warning ("Warning: arch-independent data dir (%s) does not exist.\n",
 		 Vdata_directory);

-#ifdef VMS
-  Vshell_file_name = build_string ("*dcl*");
-#else
   sh = (char *) getenv ("SHELL");
   Vshell_file_name = build_string (sh ? sh : "/bin/sh");
-#endif

-#ifdef VMS
-  Vtemp_file_name_pattern = build_string ("tmp:emacsXXXXXX.");
-#else
   if (getenv ("TMPDIR"))
     {
       char *dir = getenv ("TMPDIR");
@@ -1570,7 +1553,6 @@
     }
   else
     Vtemp_file_name_pattern = build_string ("/tmp/emacsXXXXXX");
-#endif

 #ifdef DOS_NT
   Vshared_game_score_directory = Qnil;
@@ -1686,10 +1668,8 @@
 See `setenv' and `getenv'.  */);
   Vprocess_environment = Qnil;

-#ifndef VMS
   defsubr (&Scall_process);
   defsubr (&Sgetenv_internal);
-#endif
   defsubr (&Scall_process_region);
 }
--- a/src/data.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/data.c	Thu Jul 31 05:33:56 2008 +0000
@@ -3271,10 +3271,6 @@
      must reestablish each time */
   signal (signo, arith_error);
 #endif /* USG */
-#ifdef VMS
-  /* VMS systems are like USG.  */
-  signal (signo, arith_error);
-#endif /* VMS */
   sigsetmask (SIGEMPTYMASK);

   SIGNAL_THREAD_CHECK (signo);
--- a/src/dired.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/dired.c	Thu Jul 31 05:33:56 2008 +0000
@@ -27,18 +27,10 @@
 #ifdef HAVE_PWD_H
 #include <pwd.h>
 #endif
-#ifndef VMS
 #include <grp.h>
-#endif

 #include <errno.h>

-#ifdef VMS
-#include <string.h>
-#include <rms.h>
-#include <rmsdef.h>
-#endif
-
 #ifdef HAVE_UNISTD_H
 #include <unistd.h>
 #endif
@@ -62,15 +54,11 @@

 #else /* not SYSV_SYSTEM_DIR */

-#ifdef NONSYSTEM_DIR_LIBRARY
-#include "ndir.h"
-#else /* not NONSYSTEM_DIR_LIBRARY */
 #ifdef MSDOS
 #include <dirent.h>
 #else
 #include <sys/dir.h>
 #endif
-#endif /* not NONSYSTEM_DIR_LIBRARY */

 #include <sys/stat.h>

@@ -174,10 +162,6 @@
 	 compile_pattern to do the work for us.  */
       /* Pass 1 for the MULTIBYTE arg
 	 because we do make multibyte strings if the contents warrant.  */
-#ifdef VMS
-      bufp = compile_pattern (match, 0,
-			      buffer_defaults.downcase_table, 0, 1);
-#else  /* !VMS */
 # ifdef WINDOWSNT
       /* Windows users want case-insensitive wildcards.  */
       bufp = compile_pattern (match, 0,
@@ -185,7 +169,6 @@
 # else	/* !WINDOWSNT */
       bufp = compile_pattern (match, 0, Qnil, 0, 1);
 # endif	 /* !WINDOWSNT */
-#endif	 /* !VMS */
     }

   /* Note: ENCODE_FILE and DECODE_FILE can GC because they can run
@@ -215,11 +198,9 @@
   re_match_object = Qt;

   /* Decide whether we need to add a directory separator.  */
-#ifndef VMS
   if (directory_nbytes == 0
       || !IS_ANY_SEP (SREF (directory, directory_nbytes - 1)))
     needsep = 1;
-#endif /* not VMS */

   /* Loop reading blocks until EOF or error.  */
   for (;;)
@@ -483,21 +464,7 @@

   elt = Qnil;

-#ifdef VMS
-  extern DIRENTRY * readdirver ();
-
-  DIRENTRY *((* readfunc) ());
-
-  /* Filename completion on VMS ignores case, since VMS filesys does.  */
-  specbind (Qcompletion_ignore_case, Qt);
-
-  readfunc = readdir;
-  if (ver_flag)
-    readfunc = readdirver;
-  file = Fupcase (file);
-#else  /* not VMS */
   CHECK_STRING (file);
-#endif /* not VMS */

 #ifdef FILE_SYSTEM_CASE
   file = FILE_SYSTEM_CASE (file);
@@ -535,9 +502,6 @@
       int len;
       int canexclude = 0;

-#ifdef VMS
-      dp = (*readfunc) (d);
-#else
       errno = 0;
       dp = readdir (d);
       if (dp == NULL && (0
@@ -549,7 +513,6 @@
 # endif
 			 ))
 	{ QUIT; continue; }
-#endif

       if (!dp) break;

@@ -830,10 +793,8 @@
 #endif /* MSDOS */

   bcopy (SDATA (dirname), fullname, pos);
-#ifndef VMS
   if (!IS_DIRECTORY_SEP (fullname[pos - 1]))
     fullname[pos++] = DIRECTORY_SEP;
-#endif

   bcopy (dp->d_name, fullname + pos, len);
   fullname[pos + len] = 0;
@@ -856,47 +817,6 @@
 #endif /* S_IFLNK */
 }

-#ifdef VMS
-
-DEFUN ("file-name-all-versions", Ffile_name_all_versions,
-       Sfile_name_all_versions, 2, 2, 0,
-       doc: /* Return a list of all versions of file name FILE in directory DIRECTORY.  */)
-     (file, directory)
-     Lisp_Object file, directory;
-{
-  return file_name_completion (file, directory, 1, 1, Qnil);
-}
-
-DEFUN ("file-version-limit", Ffile_version_limit, Sfile_version_limit, 1, 1, 0,
-       doc: /* Return the maximum number of versions allowed for FILE.
-Returns nil if the file cannot be opened or if there is no version limit.  */)
-     (filename)
-     Lisp_Object filename;
-{
-  Lisp_Object retval;
-  struct FAB    fab;
-  struct RAB    rab;
-  struct XABFHC xabfhc;
-  int status;
-
-  filename = Fexpand_file_name (filename, Qnil);
-  fab      = cc$rms_fab;
-  xabfhc   = cc$rms_xabfhc;
-  fab.fab$l_fna = SDATA (filename);
-  fab.fab$b_fns = strlen (fab.fab$l_fna);
-  fab.fab$l_xab = (char *) &xabfhc;
-  status = sys$open (&fab, 0, 0);
-  if (status != RMS$_NORMAL)	/* Probably non-existent file */
-    return Qnil;
-  sys$close (&fab, 0, 0);
-  if (xabfhc.xab$w_verlimit == 32767)
-    return Qnil;		/* No version limit */
-  else
-    return make_number (xabfhc.xab$w_verlimit);
-}
-
-#endif /* VMS */
-
 Lisp_Object
 make_time (time)
      time_t time;
@@ -1132,10 +1052,6 @@
   defsubr (&Sdirectory_files);
   defsubr (&Sdirectory_files_and_attributes);
   defsubr (&Sfile_name_completion);
-#ifdef VMS
-  defsubr (&Sfile_name_all_versions);
-  defsubr (&Sfile_version_limit);
-#endif /* VMS */
   defsubr (&Sfile_name_all_completions);
   defsubr (&Sfile_attributes);
   defsubr (&Sfile_attributes_lessp);
--- a/src/dispnew.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/dispnew.c	Thu Jul 31 05:33:56 2008 +0000
@@ -6836,12 +6836,7 @@
   if (! inhibit_window_system && ! display_arg)
     {
       char *display;
-#ifdef VMS
-      display = getenv ("DECW$DISPLAY");
-#else
       display = getenv ("DISPLAY");
-#endif
-
       display_arg = (display != 0 && *display != 0);

       if (display_arg && !x_display_ok (display))
@@ -6912,40 +6907,15 @@
 #endif
   if (!terminal_type)
     {
-#ifdef VMS
-      fprintf (stderr, "Please specify your terminal type.\n\
-For types defined in VMS, use  set term /device=TYPE.\n\
-For types not defined in VMS, use  define emacs_term \"TYPE\".\n\
-\(The quotation marks are necessary since terminal types are lower case.)\n");
-#else /* not VMS */
-
 #ifdef HAVE_WINDOW_SYSTEM
       if (! inhibit_window_system)
 	fprintf (stderr, "Please set the environment variable DISPLAY or TERM (see `tset').\n");
       else
 #endif /* HAVE_WINDOW_SYSTEM */
 	fprintf (stderr, "Please set the environment variable TERM; see `tset'.\n");
-#endif /* not VMS */
       exit (1);
     }

-#ifdef VMS
-  /* VMS DCL tends to up-case things, so down-case term type.
-     Hardly any uppercase letters in terminal types; should be none.  */
-  {
-    char *new = (char *) xmalloc (strlen (terminal_type) + 1);
-    char *p;
-
-    strcpy (new, terminal_type);
-
-    for (p = new; *p; p++)
-      if (isupper (*p))
-	*p = tolower (*p);
-
-    terminal_type = new;
-  }
-#endif /* VMS */
-
   {
     struct terminal *t;
     struct frame *f = XFRAME (selected_frame);
--- a/src/doc.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/doc.c	Thu Jul 31 05:33:56 2008 +0000
@@ -58,28 +58,6 @@

 extern Lisp_Object Qremap;

-/* For VMS versions with limited file name syntax,
-   convert the name to something VMS will allow.  */
-static void
-munge_doc_file_name (name)
-     char *name;
-{
-#ifdef VMS
-#ifndef NO_HYPHENS_IN_FILENAMES
-  extern char * sys_translate_unix (char *ufile);
-  strcpy (name, sys_translate_unix (name));
-#else /* NO_HYPHENS_IN_FILENAMES */
-  char *p = name;
-  while (*p)
-    {
-      if (*p == '-')
-	*p = '_';
-      p++;
-    }
-#endif /* NO_HYPHENS_IN_FILENAMES */
-#endif /* VMS */
-}
-
 /* Buffer used for reading from documentation file.  */
 static char *get_doc_string_buffer;
 static int get_doc_string_buffer_size;
@@ -169,7 +147,6 @@
       name = (char *) alloca (minsize + SCHARS (file) + 8);
       strcpy (name, SDATA (Vdoc_directory));
       strcat (name, SDATA (file));
-      munge_doc_file_name (name);
     }
   else
     {
@@ -186,7 +163,6 @@
 	     So check in ../etc. */
 	  strcpy (name, "../etc/");
 	  strcat (name, SDATA (file));
-	  munge_doc_file_name (name);

 	  fd = emacs_open (name, O_RDONLY, 0);
 	}
@@ -618,7 +594,6 @@
       strcpy (name, SDATA (Vdoc_directory));
     }
   strcat (name, SDATA (filename)); 	/*** Add this line ***/
-  munge_doc_file_name (name);

   /* Vbuild_files is nil when temacs is run, and non-nil after that.  */
   if (NILP (Vbuild_files))
--- a/src/emacs.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/emacs.c	Thu Jul 31 05:33:56 2008 +0000
@@ -27,10 +27,6 @@
 #include <sys/types.h>
 #include <sys/file.h>

-#ifdef VMS
-#include <ssdef.h>
-#endif
-
 #ifdef HAVE_UNISTD_H
 #include <unistd.h>
 #endif
@@ -378,9 +374,6 @@
       shut_down_emacs (sig, 0, Qnil);
     }

-#ifdef VMS
-  LIB$STOP (SS$_ABORT);
-#else
   /* Signal the same code; this time it will really be fatal.
      Remember that since we're in a signal handler, the signal we're
      going to send is probably blocked, so we have to unblock it if we
@@ -393,7 +386,6 @@
     fatal_error_signal_hook ();

   kill (getpid (), fatal_error_code);
-#endif /* not VMS */
 }

 #ifdef SIGDANGER
@@ -591,14 +583,6 @@
 }


-#ifdef VMS
-#ifdef LINK_CRTL_SHARE
-#ifdef SHARABLE_LIB_BUG
-extern noshare char **environ;
-#endif /* SHARABLE_LIB_BUG */
-#endif /* LINK_CRTL_SHARE */
-#endif /* VMS */
-
 #ifdef HAVE_TZSET
 /* A valid but unlikely value for the TZ environment value.
    It is OK (though a bit slower) if the user actually chooses this value.  */
@@ -785,16 +769,7 @@

 /* ARGSUSED */
 int
-main (argc, argv
-#ifdef VMS
-, envp
-#endif
-)
-     int argc;
-     char **argv;
-#ifdef VMS
-     char **envp;
-#endif
+main (int argc, char **argv)
 {
 #if GC_MARK_STACK
   Lisp_Object dummy;
@@ -921,29 +896,6 @@
     }
 #endif

-#ifdef VMS
-  /* If -map specified, map the data file in.  */
-  {
-    char *file;
-    if (argmatch (argv, argc, "-map", "--map-data", 3, &file, &skip_args))
-      mapin_data (file);
-  }
-
-#ifdef LINK_CRTL_SHARE
-#ifdef SHARABLE_LIB_BUG
-  /* Bletcherous shared libraries!  */
-  if (!stdin)
-    stdin = fdopen (0, "r");
-  if (!stdout)
-    stdout = fdopen (1, "w");
-  if (!stderr)
-    stderr = fdopen (2, "w");
-  if (!environ)
-    environ = envp;
-#endif /* SHARABLE_LIB_BUG */
-#endif /* LINK_CRTL_SHARE */
-#endif /* VMS */
-
 #if defined (HAVE_SETRLIMIT) && defined (RLIMIT_STACK)
   /* Extend the stack space available.
      Don't do that if dumping, since some systems (e.g. DJGPP)
@@ -1565,9 +1517,6 @@
 #endif
       syms_of_textprop ();
       syms_of_composite ();
-#ifdef VMS
-      syms_of_vmsproc ();
-#endif /* VMS */
 #ifdef WINDOWSNT
       syms_of_ntproc ();
 #endif /* WINDOWSNT */
@@ -1644,16 +1593,8 @@
   init_editfns (); /* init_process uses Voperating_system_release. */
   init_process (); /* init_display uses add_keyboard_wait_descriptor. */
   init_keyboard ();	/* This too must precede init_sys_modes.  */
-#ifdef VMS
-  init_vmsproc ();	/* And this too.  */
-#endif /* VMS */
   if (!noninteractive)
-    {
-#ifdef VMS
-      init_vms_input ();/* init_display calls get_tty_size, that needs this.  */
-#endif /* VMS */
-      init_display ();	/* Determine terminal type.  Calls init_sys_modes.  */
-    }
+    init_display ();	/* Determine terminal type.  Calls init_sys_modes.  */
   init_fns ();
   init_xdisp ();
 #ifdef HAVE_WINDOW_SYSTEM
@@ -1662,9 +1603,6 @@
 #endif /* HAVE_WINDOW_SYSTEM */
   init_macros ();
   init_floatfns ();
-#ifdef VMS
-  init_vmsfns ();
-#endif /* VMS */
 #ifdef HAVE_SOUND
   init_sound ();
 #endif
@@ -1770,9 +1708,6 @@
 #ifdef HAVE_SHM
   { "-nl", "--no-shared-memory", 140, 0 },
 #endif
-#ifdef VMS
-  { "-map", "--map-data", 130, 0 },
-#endif
   { "-t", "--terminal", 120, 1 },
   { "-nw", "--no-window-system", 110, 0 },
   { "-nw", "--no-windows", 110, 0 },
@@ -2051,12 +1986,6 @@

   UNGCPRO;

-/* Is it really necessary to do this deassign
-   when we are going to exit anyway?  */
-/* #ifdef VMS
-  stop_vms_input ();
- #endif  */
-
   shut_down_emacs (0, 0, STRINGP (arg) ? arg : Qnil);

   /* If we have an auto-save list file,
@@ -2124,10 +2053,6 @@
   unlock_all_files ();
 #endif

-#ifdef VMS
-  kill_vms_processes ();
-#endif
-
 #if 0 /* This triggers a bug in XCloseDisplay and is not needed.  */
 #ifdef HAVE_X_WINDOWS
   /* It's not safe to call intern here.  Maybe we are crashing.  */
@@ -2264,9 +2189,6 @@
 #endif

   fflush (stdout);
-#ifdef VMS
-  mapout_data (SDATA (filename));
-#else
   /* Tell malloc where start of impure now is.  */
   /* Also arrange for warnings when nearly out of space.  */
 #ifndef SYSTEM_MALLOC
@@ -2297,7 +2219,6 @@
 #ifdef DOUG_LEA_MALLOC
   free (malloc_state_ptr);
 #endif
-#endif /* not VMS */

   Vpurify_flag = tem;

@@ -2455,7 +2376,6 @@
   `ms-dos'      compiled as an MS-DOS application.
   `windows-nt'  compiled as a native W32 application.
   `cygwin'      compiled using the Cygwin library.
-  `vax-vms'     compiled for a (Open)VMS system.
 Anything else indicates some sort of Unix system.  */);
   Vsystem_type = intern (SYSTEM_TYPE);
--- a/src/fileio.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/fileio.c	Thu Jul 31 05:33:56 2008 +0000
@@ -50,14 +50,6 @@
 #endif

 #include <ctype.h>
-
-#ifdef VMS
-#include "vmsdir.h"
-#include <perror.h>
-#include <stddef.h>
-#include <string.h>
-#endif
-
 #include <errno.h>

 #ifndef vax11c
@@ -111,13 +103,6 @@
 #define DRIVE_LETTER(x) (tolower (x))
 #endif

-#ifdef VMS
-#include <file.h>
-#include <rmsdef.h>
-#include <fab.h>
-#include <nam.h>
-#endif
-
 #include "systime.h"

 #ifdef HPUX
@@ -200,10 +185,6 @@
 /* File name in which we write a list of all our auto save files.  */
 Lisp_Object Vauto_save_list_file_name;

-/* On VMS, nonzero means write new files with record format stmlf.
-   Zero means use var format.  */
-int vms_stmlf_recfm;
-
 /* On NT, specifies the directory separator character, used (eg.) when
    expanding file names.  This can be bound to / or \. */
 Lisp_Object Vdirectory_sep_char;
@@ -404,8 +385,7 @@
        doc: /* Return the directory component in file name FILENAME.
 Return nil if FILENAME does not include a directory.
 Otherwise return a directory name.
-Given a Unix syntax file name, returns a string ending in slash;
-on VMS, perhaps instead a string ending in `:', `]' or `>'.  */)
+Given a Unix syntax file name, returns a string ending in slash.  */)
      (filename)
      Lisp_Object filename;
 {
@@ -433,9 +413,6 @@
   p = beg + SBYTES (filename);

   while (p != beg && !IS_DIRECTORY_SEP (p[-1])
-#ifdef VMS
-	 && p[-1] != ':' && p[-1] != ']' && p[-1] != '>'
-#endif /* VMS */
 #ifdef DOS_NT
 	 /* only recognise drive specifier at the beginning */
 	 && !(p[-1] == ':'
@@ -500,9 +477,6 @@
   end = p = beg + SBYTES (filename);

   while (p != beg && !IS_DIRECTORY_SEP (p[-1])
-#ifdef VMS
-	 && p[-1] != ':' && p[-1] != ']' && p[-1] != '>'
-#endif /* VMS */
 #ifdef DOS_NT
 	 /* only recognise drive specifier at beginning */
 	 && !(p[-1] == ':'
@@ -557,64 +531,6 @@
       return out;
     }

-#ifdef VMS
-  /* Is it already a directory string? */
-  if (in[size] == ':' || in[size] == ']' || in[size] == '>')
-    return out;
-  /* Is it a VMS directory file name?  If so, hack VMS syntax.  */
-  else if (! index (in, '/')
-	   && ((size > 3 && ! strcmp (&in[size - 3], ".DIR"))
-	       || (size > 3 && ! strcmp (&in[size - 3], ".dir"))
-	       || (size > 5 && (! strncmp (&in[size - 5], ".DIR", 4)
-				|| ! strncmp (&in[size - 5], ".dir", 4))
-		   && (in[size - 1] == '.' || in[size - 1] == ';')
-		   && in[size] == '1')))
-    {
-      register char *p, *dot;
-      char brack;
-
-      /* x.dir -> [.x]
-	 dir:x.dir --> dir:[x]
-	 dir:[x]y.dir --> dir:[x.y] */
-      p = in + size;
-      while (p != in && *p != ':' && *p != '>' && *p != ']') p--;
-      if (p != in)
-	{
-	  strncpy (out, in, p - in);
-	  out[p - in] = '\0';
-	  if (*p == ':')
-	    {
-	      brack = ']';
-	      strcat (out, ":[");
-	    }
-	  else
-	    {
-	      brack = *p;
-	      strcat (out, ".");
-	    }
-	  p++;
-	}
-      else
-	{
-	  brack = ']';
-	  strcpy (out, "[.");
-	}
-      dot = index (p, '.');
-      if (dot)
-	{
-	  /* blindly remove any extension */
-	  size = strlen (out) + (dot - p);
-	  strncat (out, p, dot - p);
-	}
-      else
-	{
-	  strcat (out, p);
-	  size = strlen (out);
-	}
-      out[size++] = brack;
-      out[size] = '\0';
-    }
-#else /* not VMS */
   /* For Unix syntax, Append a slash if necessary */
   if (!IS_DIRECTORY_SEP (out[size]))
     {
@@ -625,7 +541,6 @@
 #ifdef DOS_NT
   CORRECT_DIR_SEPS (out);
 #endif
-#endif /* not VMS */
   return out;
 }

@@ -636,8 +551,7 @@
 a directory is different from its name as a file.
 The result can be used as the value of `default-directory'
 or passed as second argument to `expand-file-name'.
-For a Unix-syntax file name, just appends a slash.
-On VMS, converts \"[X]FOO.DIR\" to \"[X.FOO]\", etc.  */)
+For a Unix-syntax file name, just appends a slash.  */)
      (file)
      Lisp_Object file;
 {
@@ -662,9 +576,6 @@

 /*
  * Convert from directory name to filename.
- * On VMS:
- *       xyzzy:[mukesh.emacs] => xyzzy:[mukesh]emacs.dir.1
- *       xyzzy:[mukesh] => xyzzy:[000000]mukesh.dir.1
  * On UNIX, it's simple: just make sure there isn't a terminating /

  * Value is nonzero if the string output is different from the input.
@@ -675,130 +586,9 @@
      char *src, *dst;
 {
   long slen;
-#ifdef VMS
-  long rlen;
-  char * ptr, * rptr;
-  char bracket;
-  struct FAB fab = cc$rms_fab;
-  struct NAM nam = cc$rms_nam;
-  char esa[NAM$C_MAXRSS];
-#endif /* VMS */

   slen = strlen (src);
-#ifdef VMS
-  if (! index (src, '/')
-      && (src[slen - 1] == ']'
-	  || src[slen - 1] == ':'
-	  || src[slen - 1] == '>'))
-    {
-      /* VMS style - convert [x.y.z] to [x.y]z, [x] to [000000]x */
-      fab.fab$l_fna = src;
-      fab.fab$b_fns = slen;
-      fab.fab$l_nam = &nam;
-      fab.fab$l_fop = FAB$M_NAM;
-
-      nam.nam$l_esa = esa;
-      nam.nam$b_ess = sizeof esa;
-      nam.nam$b_nop |= NAM$M_SYNCHK;
-
-      /* We call SYS$PARSE to handle such things as [--] for us. */
-      if (SYS$PARSE (&fab, 0, 0) == RMS$_NORMAL)
-	{
-	  slen = nam.nam$b_esl;
-	  if (esa[slen - 1] == ';' && esa[slen - 2] == '.')
-	    slen -= 2;
-	  esa[slen] = '\0';
-	  src = esa;
-	}
-      if (src[slen - 1] != ']' && src[slen - 1] != '>')
-	{
-	  /* what about when we have logical_name:???? */
-	  if (src[slen - 1] == ':')
-	    {                   /* Xlate logical name and see what we get */
-	      ptr = strcpy (dst, src); /* upper case for getenv */
-	      while (*ptr)
-		{
-		  if ('a' <= *ptr && *ptr <= 'z')
-		    *ptr -= 040;
-		  ptr++;
-		}
-	      dst[slen - 1] = 0;        /* remove colon */
-	      if (!(src = egetenv (dst)))
-		return 0;
-	      /* should we jump to the beginning of this procedure?
-		 Good points: allows us to use logical names that xlate
-		 to Unix names,
-		 Bad points: can be a problem if we just translated to a device
-		 name...
-		 For now, I'll punt and always expect VMS names, and hope for
-		 the best! */
-	      slen = strlen (src);
-	      if (src[slen - 1] != ']' && src[slen - 1] != '>')
-		{ /* no recursion here! */
-		  strcpy (dst, src);
-		  return 0;
-		}
-	    }
-	  else
-	    {           /* not a directory spec */
-	      strcpy (dst, src);
-	      return 0;
-	    }
-	}
-      bracket = src[slen - 1];
-
-      /* If bracket is ']' or '>', bracket - 2 is the corresponding
-	 opening bracket.  */
-      ptr = index (src, bracket - 2);
-      if (ptr == 0)
-	{ /* no opening bracket */
-	  strcpy (dst, src);
-	  return 0;
-	}
-      if (!(rptr = rindex (src, '.')))
-	rptr = ptr;
-      slen = rptr - src;
-      strncpy (dst, src, slen);
-      dst[slen] = '\0';
-      if (*rptr == '.')
-	{
-	  dst[slen++] = bracket;
-	  dst[slen] = '\0';
-	}
-      else
-	{
-	  /* If we have the top-level of a rooted directory (i.e. xx:[000000]),
-	     then translate the device and recurse. */
-	  if (dst[slen - 1] == ':'
-	      && dst[slen - 2] != ':'   /* skip decnet nodes */
-	      && strcmp (src + slen, "[000000]") == 0)
-	    {
-	      dst[slen - 1] = '\0';
-	      if ((ptr = egetenv (dst))
-		  && (rlen = strlen (ptr) - 1) > 0
-		  && (ptr[rlen] == ']' || ptr[rlen] == '>')
-		  && ptr[rlen - 1] == '.')
-		{
-		  char * buf = (char *) alloca (strlen (ptr) + 1);
-		  strcpy (buf, ptr);
-		  buf[rlen - 1] = ']';
-		  buf[rlen] = '\0';
-		  return directory_file_name (buf, dst);
-		}
-	      else
-		dst[slen - 1] = ':';
-	    }
-	  strcat (dst, "[000000]");
-	  slen += 8;
-	}
-      rptr++;
-      rlen = strlen (rptr) - 1;
-      strncat (dst, rptr, rlen);
-      dst[slen + rlen] = '\0';
-      strcat (dst, ".DIR.1");
-      return 1;
-    }
-#endif /* VMS */
+
   /* Process as Unix format: just remove any final slash.
      But leave "/" unchanged; do not change it to "".  */
   strcpy (dst, src);
@@ -821,9 +611,7 @@
 This is the name of the file that holds the data for the directory DIRECTORY.
 This operation exists because a directory is also a file, but its name as
 a directory is different from its name as a file.
-In Unix-syntax, this function just removes the final slash.
-On VMS, given a VMS-syntax directory name such as \"[X.Y]\",
-it returns a file name such as \"[X]Y.DIR.1\".  */)
+In Unix-syntax, this function just removes the final slash.  */)
      (directory)
      Lisp_Object directory;
 {
@@ -841,14 +629,7 @@
   if (!NILP (handler))
     return call2 (handler, Qdirectory_file_name, directory);

-#ifdef VMS
-  /* 20 extra chars is insufficient for VMS, since we might perform a
-     logical name translation. an equivalence string can be up to 255
-     chars long, so grab that much extra space...  - sss */
-  buf = (char *) alloca (SBYTES (directory) + 20 + 255);
-#else
   buf = (char *) alloca (SBYTES (directory) + 20);
-#endif
   directory_file_name (SDATA (directory), buf);
   return make_specified_string (buf, -1, strlen (buf),
 				STRING_MULTIBYTE (directory));
@@ -1038,14 +819,6 @@

   int tlen;
   struct passwd *pw;
-#ifdef VMS
-  unsigned char * colon = 0;
-  unsigned char * close = 0;
-  unsigned char * slash = 0;
-  unsigned char * brack = 0;
-  int lbrack = 0, rbrack = 0;
-  int dots = 0;
-#endif /* VMS */
 #ifdef DOS_NT
   int drive = 0;
   int collapse_newdir = 1;
@@ -1196,9 +969,6 @@
 #ifdef WINDOWSNT
       && (drive || IS_DIRECTORY_SEP (nm[1])) && !is_escaped
 #endif
-#ifdef VMS
-      || index (nm, ':')
-#endif /* VMS */
       )
     {
       /* If it turns out that the filename we want to return is just a
@@ -1229,92 +999,10 @@
 		   && IS_DIRECTORY_SEP (p[0])
 		   && IS_DIRECTORY_SEP (p[1]))
 	    lose = 1;
-
-#ifdef VMS
-	  if (p[0] == '\\')
-	    lose = 1;
-	  if (p[0] == '/') {
-	    /* if dev:[dir]/, move nm to / */
-	    if (!slash && p > nm && (brack || colon)) {
-	      nm = (brack ? brack + 1 : colon + 1);
-	      lbrack = rbrack = 0;
-	      brack = 0;
-	      colon = 0;
-	    }
-	    slash = p;
-	  }
-	  if (p[0] == '-')
-#ifdef NO_HYPHENS_IN_FILENAMES
-	    if (lbrack == rbrack)
-	      {
-                /* Avoid clobbering negative version numbers.  */
-                if (dots < 2)
-		  p[0] = '_';
-	      }
-	    else
-#endif /* NO_HYPHENS_IN_FILENAMES */
-	      if (lbrack > rbrack
-		  && ((p[-1] == '.' || p[-1] == '[' || p[-1] == '<')
-		      && (p[1] == '.' || p[1] == ']' || p[1] == '>')))
-		lose = 1;
-#ifdef NO_HYPHENS_IN_FILENAMES
-	      else
-		p[0] = '_';
-#endif /* NO_HYPHENS_IN_FILENAMES */
-	  /* count open brackets, reset close bracket pointer */
-	  if (p[0] == '[' || p[0] == '<')
-	    lbrack++, brack = 0;
-	  /* count close brackets, set close bracket pointer */
-	  if (p[0] == ']' || p[0] == '>')
-	    rbrack++, brack = p;
-	  /* detect ][ or >< */
-	  if ((p[0] == ']' || p[0] == '>') && (p[1] == '[' || p[1] == '<'))
-	    lose = 1;
-	  if ((p[0] == ':' || p[0] == ']' || p[0] == '>') && p[1] == '~')
-	    nm = p + 1, lose = 1;
-	  if (p[0] == ':' && (colon || slash))
-	    /* if dev1:[dir]dev2:, move nm to dev2: */
-	    if (brack)
-	      {
-		nm = brack + 1;
-		brack = 0;
-	      }
-	    /* if /name/dev:, move nm to dev: */
-	    else if (slash)
-	      nm = slash + 1;
-	    /* if node::dev:, move colon following dev */
-	    else if (colon && colon[-1] == ':')
-	      colon = p;
-	    /* if dev1:dev2:, move nm to dev2: */
-	    else if (colon && colon[-1] != ':')
-	      {
-		nm = colon + 1;
-		colon = 0;
-	      }
-	  if (p[0] == ':' && !colon)
-	    {
-	      if (p[1] == ':')
-		p++;
-	      colon = p;
-	    }
-	  if (lbrack == rbrack)
-	    if (p[0] == ';')
-	      dots = 2;
-	    else if (p[0] == '.')
-	      dots++;
-#endif /* VMS */
 	  p++;
 	}
       if (!lose)
 	{
-#ifdef VMS
-	  if (index (nm, '/'))
-	    {
-	      nm = sys_translate_unix (nm);
-	      nm_in_name = 0;
-	      return make_specified_string (nm, -1, strlen (nm), multibyte);
-	    }
-#endif /* VMS */
 #ifdef DOS_NT
 	  /* Make sure directories are all separated with / or \ as
 	     desired, but avoid allocation of a new string when not
@@ -1367,9 +1055,6 @@
   if (nm[0] == '~')		/* prefix ~ */
     {
       if (IS_DIRECTORY_SEP (nm[1])
-#ifdef VMS
-	  || nm[1] == ':'
-#endif /* VMS */
 	  || nm[1] == 0)	/* ~ by itself */
 	{
 	  Lisp_Object tem;
@@ -1393,18 +1078,11 @@
 #ifdef DOS_NT
 	  collapse_newdir = 0;
 #endif
-#ifdef VMS
-	  nm++;			/* Don't leave the slash in nm.  */
-#endif /* VMS */
 	}
       else			/* ~user/filename */
 	{
 	  unsigned char *o, *p;
-	  for (p = nm; *p && (!IS_DIRECTORY_SEP (*p)
-#ifdef VMS
-			      && *p != ':'
-#endif /* VMS */
-			      ); p++);
+	  for (p = nm; *p && (!IS_DIRECTORY_SEP (*p)); p++);
 	  o = alloca (p - nm + 1);
 	  bcopy ((char *) nm, o, p - nm);
 	  o [p - nm] = 0;
@@ -1415,14 +1093,10 @@
 	  if (pw)
 	    {
 	      newdir = (unsigned char *) pw -> pw_dir;
-#ifdef VMS
-	      nm = p + 1;	/* skip the terminator */
-#else
 	      nm = p;
 #ifdef DOS_NT
 	      collapse_newdir = 0;
 #endif
-#endif /* VMS */
 	    }

 	  /* If we don't find a user of that name, leave the name
@@ -1465,9 +1139,6 @@
 #ifdef WINDOWSNT
       && !(IS_DIRECTORY_SEP (nm[0]) && IS_DIRECTORY_SEP (nm[1]))
 #endif
-#ifdef VMS
-      && !index (nm, ':')
-#endif
       && !newdir)
     {
       newdir = SDATA (default_directory);
@@ -1588,7 +1259,6 @@

   if (newdir)
     {
-#ifndef VMS
       if (nm[0] == 0 || IS_DIRECTORY_SEP (nm[0]))
 	{
 #ifdef DOS_NT
@@ -1603,69 +1273,19 @@
 	    strcpy (target, newdir);
 	}
       else
-#endif
 	file_name_as_directory (target, newdir);
     }

   strcat (target, nm);
-#ifdef VMS
-  if (index (target, '/'))
-    strcpy (target, sys_translate_unix (target));
-#endif /* VMS */
-
-  /* ASSERT (IS_DIRECTORY_SEP (target[0])) if not VMS */

   /* Now canonicalize by removing `//', `/.' and `/foo/..' if they
      appear.  */
-
   {
     unsigned char *p = target;
     unsigned char *o = target;

     while (*p)
       {
-#ifdef VMS
-	if (*p != ']' && *p != '>' && *p != '-')
-	  {
-	    if (*p == '\\')
-	      p++;
-	    *o++ = *p++;
-	  }
-	else if ((p[0] == ']' || p[0] == '>') && p[0] == p[1] + 2)
-	  /* brackets are offset from each other by 2 */
-	  {
-	    p += 2;
-	    if (*p != '.' && *p != '-' && o[-1] != '.')
-	      /* convert [foo][bar] to [bar] */
-	      while (o[-1] != '[' && o[-1] != '<')
-		o--;
-	    else if (*p == '-' && *o != '.')
-	      *--p = '.';
-	  }
-	else if (p[0] == '-' && o[-1] == '.'
-		 && (p[1] == '.' || p[1] == ']' || p[1] == '>'))
-	  /* flush .foo.- ; leave - if stopped by '[' or '<' */
-	  {
-	    do
-	      o--;
-	    while (o[-1] != '.' && o[-1] != '[' && o[-1] != '<');
-	    if (p[1] == '.')      /* foo.-.bar ==> bar.  */
-	      p += 2;
-	    else if (o[-1] == '.') /* '.foo.-]' ==> ']' */
-	      p++, o--;
-	    /* else [foo.-] ==> [-] */
-	  }
-	else
-	  {
-#ifdef NO_HYPHENS_IN_FILENAMES
-	    if (*p == '-'
-		&& o[-1] != '[' && o[-1] != '<' && o[-1] != '.'
-		&& p[1] != ']' && p[1] != '>' && p[1] != '.')
-	      *p = '_';
-#endif /* NO_HYPHENS_IN_FILENAMES */
-	    *o++ = *p++;
-	  }
-#else /* not VMS */
 	if (!IS_DIRECTORY_SEP (*p))
 	  {
 	    *o++ = *p++;
@@ -1707,7 +1327,6 @@
 	  {
 	    *o++ = *p++;
 	  }
-#endif /* not VMS */
       }

 #ifdef DOS_NT
@@ -1777,32 +1396,13 @@
   unsigned char *target;
   struct passwd *pw;
   int lose;
-#ifdef VMS
-  unsigned char * colon = 0;
-  unsigned char * close = 0;
-  unsigned char * slash = 0;
-  unsigned char * brack = 0;
-  int lbrack = 0, rbrack = 0;
-  int dots = 0;
-#endif /* VMS */

   CHECK_STRING (name);
-
-#ifdef VMS
-  /* Filenames on VMS are always upper case.  */
-  name = Fupcase (name);
-#endif
-
   nm = SDATA (name);

   /* If nm is absolute, flush ...// and detect /./ and /../.
      If no /./ or /../ we can return right away.  */
-  if (
-      nm[0] == '/'
-#ifdef VMS
-      || index (nm, ':')
-#endif /* VMS */
-      )
+  if (nm[0] == '/')
     {
       p = nm;
       lose = 0;
@@ -1817,87 +1417,10 @@
 	      && (p[2] == '/' || p[2] == 0
 		  || (p[2] == '.' && (p[3] == '/' || p[3] == 0))))
 	    lose = 1;
-#ifdef VMS
-	  if (p[0] == '\\')
-	    lose = 1;
-	  if (p[0] == '/') {
-	    /* if dev:[dir]/, move nm to / */
-	    if (!slash && p > nm && (brack || colon)) {
-	      nm = (brack ? brack + 1 : colon + 1);
-	      lbrack = rbrack = 0;
-	      brack = 0;
-	      colon = 0;
-	    }
-	    slash = p;
-	  }
-	  if (p[0] == '-')
-#ifndef VMS4_4
-	    /* VMS pre V4.4,convert '-'s in filenames. */
-	    if (lbrack == rbrack)
-	      {
-		if (dots < 2)   /* this is to allow negative version numbers */
-		  p[0] = '_';
-	      }
-	    else
-#endif /* VMS4_4 */
-	      if (lbrack > rbrack
-		  && ((p[-1] == '.' || p[-1] == '[' || p[-1] == '<')
-		      && (p[1] == '.' || p[1] == ']' || p[1] == '>')))
-		lose = 1;
-#ifndef VMS4_4
-	      else
-		p[0] = '_';
-#endif /* VMS4_4 */
-	  /* count open brackets, reset close bracket pointer */
-	  if (p[0] == '[' || p[0] == '<')
-	    lbrack++, brack = 0;
-	  /* count close brackets, set close bracket pointer */
-	  if (p[0] == ']' || p[0] == '>')
-	    rbrack++, brack = p;
-	  /* detect ][ or >< */
-	  if ((p[0] == ']' || p[0] == '>') && (p[1] == '[' || p[1] == '<'))
-	    lose = 1;
-	  if ((p[0] == ':' || p[0] == ']' || p[0] == '>') && p[1] == '~')
-	    nm = p + 1, lose = 1;
-	  if (p[0] == ':' && (colon || slash))
-	    /* if dev1:[dir]dev2:, move nm to dev2: */
-	    if (brack)
-	      {
-		nm = brack + 1;
-		brack = 0;
-	      }
-	    /* If /name/dev:, move nm to dev: */
-	    else if (slash)
-	      nm = slash + 1;
-	    /* If node::dev:, move colon following dev */
-	    else if (colon && colon[-1] == ':')
-	      colon = p;
-	    /* If dev1:dev2:, move nm to dev2: */
-	    else if (colon && colon[-1] != ':')
-	      {
-		nm = colon + 1;
-		colon = 0;
-	      }
-	  if (p[0] == ':' && !colon)
-	    {
-	      if (p[1] == ':')
-		p++;
-	      colon = p;
-	    }
-	  if (lbrack == rbrack)
-	    if (p[0] == ';')
-	      dots = 2;
-	    else if (p[0] == '.')
-	      dots++;
-#endif /* VMS */
 	  p++;
 	}
       if (!lose)
 	{
-#ifdef VMS
-	  if (index (nm, '/'))
-	    return build_string (sys_translate_unix (nm));
-#endif /* VMS */
 	  if (nm == SDATA (name))
 	    return name;
 	  return build_string (nm);
@@ -1909,18 +1432,11 @@
   newdir = 0;

   if (nm[0] == '~')             /* prefix ~ */
-    if (nm[1] == '/'
-#ifdef VMS
-	|| nm[1] == ':'
-#endif /* VMS */
-	|| nm[1] == 0)/* ~/filename */
+    if (nm[1] == '/' || nm[1] == 0)/* ~/filename */
       {
 	if (!(newdir = (unsigned char *) egetenv ("HOME")))
 	  newdir = (unsigned char *) "";
 	nm++;
-#ifdef VMS
-	nm++;                   /* Don't leave the slash in nm.  */
-#endif /* VMS */
       }
     else  /* ~user/filename */
       {
@@ -1929,11 +1445,6 @@
 	/* Find end of name. */
 	unsigned char *ptr = (unsigned char *) index (user, '/');
 	int len = ptr ? ptr - user : strlen (user);
-#ifdef VMS
-	unsigned char *ptr1 = index (user, ':');
-	if (ptr1 != 0 && ptr1 - user < len)
-	  len = ptr1 - user;
-#endif /* VMS */
 	/* Copy the user name into temp storage. */
 	o = (unsigned char *) alloca (len + 1);
 	bcopy ((char *) user, o, len);
@@ -1952,11 +1463,7 @@
 	nm += len;
       }

-  if (nm[0] != '/'
-#ifdef VMS
-      && !index (nm, ':')
-#endif /* not VMS */
-      && !newdir)
+  if (nm[0] != '/' && !newdir)
     {
       if (NILP (defalt))
 	defalt = current_buffer->directory;
@@ -1972,19 +1479,13 @@

   if (newdir)
     {
-#ifndef VMS
       if (nm[0] == 0 || nm[0] == '/')
 	strcpy (target, newdir);
       else
-#endif
       file_name_as_directory (target, newdir);
     }

   strcat (target, nm);
-#ifdef VMS
-  if (index (target, '/'))
-    strcpy (target, sys_translate_unix (target));
-#endif /* VMS */

   /* Now canonicalize by removing /. and /foo/.. if they appear */

@@ -1993,48 +1494,6 @@

   while (*p)
     {
-#ifdef VMS
-      if (*p != ']' && *p != '>' && *p != '-')
-	{
-	  if (*p == '\\')
-	    p++;
-	  *o++ = *p++;
-	}
-      else if ((p[0] == ']' || p[0] == '>') && p[0] == p[1] + 2)
-	/* brackets are offset from each other by 2 */
-	{
-	  p += 2;
-	  if (*p != '.' && *p != '-' && o[-1] != '.')
-	    /* convert [foo][bar] to [bar] */
-	    while (o[-1] != '[' && o[-1] != '<')
-	      o--;
-	  else if (*p == '-' && *o != '.')
-	    *--p = '.';
-	}
-      else if (p[0] == '-' && o[-1] == '.'
-	       && (p[1] == '.' || p[1] == ']' || p[1] == '>'))
-	/* flush .foo.- ; leave - if stopped by '[' or '<' */
-	{
-	  do
-	    o--;
-	  while (o[-1] != '.' && o[-1] != '[' && o[-1] != '<');
-	  if (p[1] == '.')      /* foo.-.bar ==> bar.  */
-	    p += 2;
-	  else if (o[-1] == '.') /* '.foo.-]' ==> ']' */
-	    p++, o--;
-	  /* else [foo.-] ==> [-] */
-	}
-      else
-	{
-#ifndef VMS4_4
-	  if (*p == '-'
-	      && o[-1] != '[' && o[-1] != '<' && o[-1] != '.'
-	      && p[1] != ']' && p[1] != '>' && p[1] != '.')
-	    *p = '_';
-#endif /* VMS4_4 */
-	  *o++ = *p++;
-	}
-#else /* not VMS */
       if (*p != '/')
 	{
 	  *o++ = *p++;
@@ -2063,7 +1522,6 @@
 	{
 	  *o++ = *p++;
 	}
-#endif /* not VMS */
     }

   return make_string (target, o - target);
@@ -2077,13 +1535,6 @@
 {
   return
     (IS_DIRECTORY_SEP (*filename) || *filename == '~'
-#ifdef VMS
-     /* ??? This criterion is probably wrong for '<'.  */
-     || index (filename, ':') || index (filename, '<')
-     || (*filename == '[' && (filename[1] != '-'
-			      || (filename[2] != '.' && filename[2] != ']'))
-	 && filename[1] != '.')
-#endif /* VMS */
 #ifdef DOS_NT
      || (IS_DRIVE (*filename) && IS_DEVICE_SEP (filename[1])
 	 && IS_DIRECTORY_SEP (filename[2]))
@@ -2100,9 +1551,6 @@
   for (p = nm + 1; p < endp; p++)
     {
       if ((0
-#ifdef VMS
-	   || p[-1] == ':' || p[-1] == ']' || p[-1] == '>'
-#endif /* VMS */
 	   || IS_DIRECTORY_SEP (p[-1]))
 	  && file_name_absolute_p (p)
 #if defined (WINDOWSNT) || defined(CYGWIN)
@@ -2112,11 +1560,7 @@
 #endif /* not (WINDOWSNT || CYGWIN) */
 	      )
 	{
-	  for (s = p; *s && (!IS_DIRECTORY_SEP (*s)
-#ifdef VMS
-			      && *s != ':'
-#endif /* VMS */
-			      ); s++);
+	  for (s = p; *s && (!IS_DIRECTORY_SEP (*s)); s++);
 	  if (p[0] == '~' && s > p + 1)	/* we've got "/~something/" */
 	    {
 	      unsigned char *o = alloca (s - p + 1);
@@ -2147,10 +1591,7 @@
 the value of that variable.  The variable name should be terminated
 with a character not a letter, digit or underscore; otherwise, enclose
 the entire variable name in braces.
-If `/~' appears, all of FILENAME through that `/' is discarded.
-
-On VMS, `$' substitution is not done; this function does little and only
-duplicates what `expand-file-name' does.  */)
+If `/~' appears, all of FILENAME through that `/' is discarded.  */)
      (filename)
      Lisp_Object filename;
 {
@@ -2189,9 +1630,6 @@
       (make_specified_string (p, -1, endp - p,
 			      STRING_MULTIBYTE (filename)));

-#ifdef VMS
-  return filename;
-#else

   /* See if any variables are substituted into the string
      and find the total length of their values in `total' */
@@ -2333,7 +1771,6 @@
   error ("Substituting nonexistent environment variable \"%s\"", target);

   /* NOTREACHED */
-#endif /* not VMS */
   return Qnil;
 }

@@ -2347,13 +1784,7 @@
   register Lisp_Object absname;

   absname = Fexpand_file_name (filename, defdir);
-#ifdef VMS
-  {
-    register int c = SREF (absname, SBYTES (absname) - 1);
-    if (c == ':' || c == ']' || c == '>')
-      absname = Fdirectory_file_name (absname);
-  }
-#else
+
   /* Remove final slash, if any (unless this is the root dir).
      stat behaves differently depending!  */
   if (SCHARS (absname) > 1
@@ -2361,7 +1792,6 @@
       && !IS_DEVICE_SEP (SREF (absname, SBYTES (absname)-2)))
     /* We cannot take shortcuts; they might be wrong for magic file names.  */
     absname = Fdirectory_file_name (absname);
-#endif
   return absname;
 }

@@ -2554,10 +1984,6 @@
     }
 #endif /* S_ISREG && S_ISLNK */

-#ifdef VMS
-  /* Create the copy file with the same record format as the input file */
-  ofd = sys_creat (SDATA (encoded_newname), 0666, ifd);
-#else
 #ifdef MSDOS
   /* System's default file type was set to binary by _fmode in emacs.c.  */
   ofd = emacs_open (SDATA (encoded_newname),
@@ -2570,7 +1996,6 @@
 		    | (NILP (ok_if_already_exists) ? O_EXCL : 0),
 		    0666);
 #endif /* not MSDOS */
-#endif /* VMS */
   if (ofd < 0)
     report_file_error ("Opening output file", Fcons (newname, Qnil));

@@ -2960,33 +2385,6 @@
 #endif /* S_IFLNK */
 }

-#ifdef VMS
-
-DEFUN ("define-logical-name", Fdefine_logical_name, Sdefine_logical_name,
-       2, 2, "sDefine logical name: \nsDefine logical name %s as: ",
-       doc: /* Define the job-wide logical name NAME to have the value STRING.
-If STRING is nil or a null string, the logical name NAME is deleted.  */)
-     (name, string)
-     Lisp_Object name;
-     Lisp_Object string;
-{
-  CHECK_STRING (name);
-  if (NILP (string))
-    delete_logical_name (SDATA (name));
-  else
-    {
-      CHECK_STRING (string);
-
-      if (SCHARS (string) == 0)
-	delete_logical_name (SDATA (name));
-      else
-	define_logical_name (SDATA (name), SDATA (string));
-    }
-
-  return string;
-}
-#endif /* VMS */
-

 DEFUN ("file-name-absolute-p", Ffile_name_absolute_p, Sfile_name_absolute_p,
        1, 1, 0,
@@ -3182,10 +2580,6 @@
 	    ? Qt : Qnil);

   dir = Ffile_name_directory (absname);
-#ifdef VMS
-  if (!NILP (dir))
-    dir = Fdirectory_file_name (dir);
-#endif /* VMS */
 #ifdef MSDOS
   if (!NILP (dir))
     dir = Fdirectory_file_name (dir);
@@ -3823,10 +3217,8 @@

   record_unwind_protect (close_file_unwind, make_number (fd));

-  /* Supposedly happens on VMS.  */
   /* Can happen on any platform that uses long as type of off_t, but allows
-     file sizes to exceed 2Gb.  VMS is no longer officially supported, so
-     give a message suitable for the latter case.  */
+     file sizes to exceed 2Gb, so give a suitable message.  */
   if (! not_regular && st.st_size < 0)
     error ("Maximum buffer size exceeded");

@@ -4995,9 +4387,6 @@
   struct stat st;
   int count = SPECPDL_INDEX ();
   int count1;
-#ifdef VMS
-  unsigned char *fname = 0;     /* If non-0, original filename (must rename) */
-#endif /* VMS */
   Lisp_Object handler;
   Lisp_Object visit_file;
   Lisp_Object annotations;
@@ -5131,52 +4520,6 @@
 #endif /* not DOS_NT */

   if (desc < 0 && (NILP (append) || errno == ENOENT))
-#ifdef VMS
-    if (auto_saving)    /* Overwrite any previous version of autosave file */
-      {
-	vms_truncate (fn);      /* if fn exists, truncate to zero length */
-	desc = emacs_open (fn, O_RDWR, 0);
-	if (desc < 0)
-	  desc = creat_copy_attrs (STRINGP (current_buffer->filename)
-				   ? SDATA (current_buffer->filename) : 0,
-				   fn);
-      }
-    else                /* Write to temporary name and rename if no errors */
-      {
-	Lisp_Object temp_name;
-	temp_name = Ffile_name_directory (filename);
-
-	if (!NILP (temp_name))
-	  {
-	    temp_name = Fmake_temp_name (concat2 (temp_name,
-						  build_string ("$$SAVE$$")));
-	    fname = SDATA (filename);
-	    fn = SDATA (temp_name);
-	    desc = creat_copy_attrs (fname, fn);
-	    if (desc < 0)
-	      {
-		/* If we can't open the temporary file, try creating a new
-		   version of the original file.  VMS "creat" creates a
-		   new version rather than truncating an existing file. */
-		fn = fname;
-		fname = 0;
-		desc = creat (fn, 0666);
-#if 0 /* This can clobber an existing file and fail to replace it,
-	 if the user runs out of space.  */
-		if (desc < 0)
-		  {
-		    /* We can't make a new version;
-		       try to truncate and rewrite existing version if any.  */
-		    vms_truncate (fn);
-		    desc = emacs_open (fn, O_RDWR, 0);
-		  }
-#endif
-	      }
-	  }
-	else
-	  desc = creat (fn, 0666);
-      }
-#else /* not VMS */
 #ifdef DOS_NT
   desc = emacs_open (fn,
 		     O_WRONLY | O_CREAT | buffer_file_type
@@ -5187,7 +4530,6 @@
 		     | (EQ (mustbenew, Qexcl) ? O_EXCL : 0),
 		     auto_saving ? auto_save_mode_bits : 0666);
 #endif /* not DOS_NT */
-#endif /* not VMS */

   if (desc < 0)
     {
@@ -5222,25 +4564,6 @@

   UNGCPRO;

-#ifdef VMS
-/*
- * Kludge Warning: The VMS C RTL likes to insert carriage returns
- * if we do writes that don't end with a carriage return. Furthermore
- * it cannot handle writes of more then 16K. The modified
- * version of "sys_write" in SYSDEP.C (see comment there) copes with
- * this EXCEPT for the last record (if it doesn't end with a carriage
- * return). This implies that if your buffer doesn't end with a carriage
- * return, you get one free... tough. However it also means that if
- * we make two calls to sys_write (a la the following code) you can
- * get one at the gap as well. The easiest way to fix this (honest)
- * is to move the gap to the next newline (or the end of the buffer).
- * Thus this change.
- *
- * Yech!
- */
-  if (GPT > BEG && GPT_ADDR[-1] != '\n')
-    move_gap (find_next_newline (GPT, 1));
-#else
 #if 0
   /* The new encoding routine doesn't require the following.  */

@@ -5257,7 +4580,6 @@
       SET_PT_BOTH (opoint, opoint_byte);
     }
 #endif
-#endif

   failure = 0;
   immediate_quit = 1;
@@ -5318,29 +4640,14 @@
      but who knows about all the other machines with NFS?)  */
 #if 0

-  /* On VMS, must do the stat after the close
-     since closing changes the modtime.  */
-#ifndef VMS
-  /* Recall that #if defined does not work on VMS.  */
 #define FOO
   fstat (desc, &st);
 #endif
-#endif

   /* NFS can report a write failure now.  */
   if (emacs_close (desc) < 0)
     failure = 1, save_errno = errno;

-#ifdef VMS
-  /* If we wrote to a temporary name and had no errors, rename to real name. */
-  if (fname)
-    {
-      if (!failure)
-	failure = (rename (fn, fname) != 0), save_errno = errno;
-      fn = fname;
-    }
-#endif /* VMS */
-
 #ifndef FOO
   stat (fn, &st);
 #endif
@@ -6256,11 +5563,6 @@
   Fput (Qfile_date_error, Qerror_message,
 	build_string ("Cannot set file date"));

-  DEFVAR_BOOL ("vms-stmlf-recfm", &vms_stmlf_recfm,
-	       doc: /* *Non-nil means write new files with record format `stmlf'.
-nil means use format `var'.  This variable is meaningful only on VMS.  */);
-  vms_stmlf_recfm = 0;
-
   DEFVAR_LISP ("directory-sep-char", &Vdirectory_sep_char,
 	       doc: /* Directory separator character for built-in functions that return file names.
 The value is always ?/.  Don't use this variable, just use `/'.  */);
@@ -6376,9 +5678,6 @@
   defsubr (&Srename_file);
   defsubr (&Sadd_name_to_file);
   defsubr (&Smake_symbolic_link);
-#ifdef VMS
-  defsubr (&Sdefine_logical_name);
-#endif /* VMS */
   defsubr (&Sfile_name_absolute_p);
   defsubr (&Sfile_exists_p);
   defsubr (&Sfile_executable_p);
--- a/src/floatfns.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/floatfns.c	Thu Jul 31 05:33:56 2008 +0000
@@ -101,16 +101,6 @@
 #endif
 #endif

-/* Avoid traps on VMS from sinh and cosh.
-   All the other functions set errno instead.  */
-
-#ifdef VMS
-#undef cosh
-#undef sinh
-#define cosh(x) ((exp(x)+exp(-x))*0.5)
-#define sinh(x) ((exp(x)-exp(-x))*0.5)
-#endif /* VMS */
-
 #ifdef FLOAT_CATCH_SIGILL
 static SIGTYPE float_error ();
 #endif
--- a/src/getpagesize.h	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/getpagesize.h	Thu Jul 31 05:33:56 2008 +0000
@@ -19,10 +19,6 @@

 #ifndef HAVE_GETPAGESIZE

-# ifdef VMS
-#  define getpagesize() 512
-# endif
-
 # ifdef HAVE_UNISTD_H
 #  include <unistd.h>
 # endif
--- a/src/ioctl.h	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,4 +0,0 @@
-/* Emacs ioctl emulation for VMS */
-
-/* arch-tag: 48595931-af6e-407d-95c7-484059087767
-   (do not change this comment) */
--- a/src/keyboard.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/keyboard.c	Thu Jul 31 05:33:56 2008 +0000
@@ -51,9 +51,7 @@
 #include "msdos.h"
 #include <time.h>
 #else /* not MSDOS */
-#ifndef VMS
 #include <sys/ioctl.h>
-#endif
 #endif /* not MSDOS */

 #include "syssignal.h"
@@ -4015,9 +4013,6 @@
       /* One way or another, wait until input is available; then, if
 	 interrupt handlers have not read it, read it now.  */

-#ifdef OLDVMS
-      wait_for_kbd_input ();
-#else
 /* Note SIGIO has been undef'd if FIONREAD is missing.  */
 #ifdef SIGIO
       gobble_input (0);
@@ -4048,7 +4043,6 @@
       if (!interrupt_input && kbd_fetch_ptr == kbd_store_ptr)
 	/* Pass 1 for EXPECT since we just waited to have input.  */
 	read_avail_input (1);
-#endif /* not VMS */
     }

   if (CONSP (Vunread_command_events))
@@ -6907,7 +6901,6 @@
   xd_read_queued_messages ();
 #endif /* HAVE_DBUS */

-#ifndef VMS
 #ifdef SIGIO
   if (interrupt_input)
     {
@@ -6930,7 +6923,6 @@
     }
   else
 #endif
-#endif
     read_avail_input (expected);
 #endif
 }
@@ -6980,17 +6972,11 @@
     }
 }

-#ifndef VMS
-
 /* Read any terminal input already buffered up by the system
    into the kbd_buffer, but do not wait.

    EXPECTED should be nonzero if the caller knows there is some input.

-   Except on VMS, all input is read by this function.
-   If interrupt_input is nonzero, this function MUST be called
-   only when SIGIO is blocked.
-
    Returns the number of keyboard chars read, or -1 meaning
    this is a bad time to try to read input.  */

@@ -7238,7 +7224,6 @@

   return nread;
 }
-#endif /* not VMS */

 void
 handle_async_input ()
@@ -11011,19 +10996,11 @@
  */
       sys_suspend ();
 #else
-#ifdef VMS
-      if (sys_suspend () == -1)
-	{
-	  printf ("Not running as a subprocess;\n");
-	  printf ("you can continue or abort.\n");
-	}
-#else /* not VMS */
       /* Perhaps should really fork an inferior shell?
 	 But that would not provide any way to get back
 	 to the original shell, ever.  */
       printf ("No support for stopping a process on this operating system;\n");
       printf ("you can continue or abort.\n");
-#endif /* not VMS */
 #endif /* not SIGTSTP */
 #ifdef MSDOS
       /* We must remain inside the screen area when the internal terminal
@@ -11062,11 +11039,7 @@
 #ifdef MSDOS
       printf ("\r\nAbort?  (y or n) ");
 #else /* not MSDOS */
-#ifdef VMS
-      printf ("Abort (and enter debugger)? (y or n) ");
-#else /* not VMS */
       printf ("Abort (and dump core)? (y or n) ");
-#endif /* not VMS */
 #endif /* not MSDOS */
       fflush (stdout);
       if (((c = getchar ()) & ~040) == 'Y')
@@ -11169,11 +11142,6 @@
   new_interrupt_input = 0;
 #endif /* not SIGIO */

-/* Our VMS input only works by interrupts, as of now.  */
-#ifdef VMS
-  new_interrupt_input = 1;
-#endif
-
   if (new_interrupt_input != interrupt_input)
     {
 #ifdef POLL_FOR_INPUT
@@ -11589,11 +11557,6 @@
   interrupt_input = 0;
 #endif

-/* Our VMS input only works by interrupts, as of now.  */
-#ifdef VMS
-  interrupt_input = 1;
-#endif
-
   sigfree ();
   dribble = 0;
--- a/src/lread.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/lread.c	Thu Jul 31 05:33:56 2008 +0000
@@ -1342,11 +1342,7 @@
   register const unsigned char *s = SDATA (pathname);
   return (IS_DIRECTORY_SEP (s[0])
 	  || (SCHARS (pathname) > 2
-	      && IS_DEVICE_SEP (s[1]) && IS_DIRECTORY_SEP (s[2]))
-#ifdef VMS
-	  || index (s, ':')
-#endif /* VMS */
-	  );
+	      && IS_DEVICE_SEP (s[1]) && IS_DIRECTORY_SEP (s[2])));
 }

 DEFUN ("locate-file-internal", Flocate_file_internal, Slocate_file_internal, 2, 4, 0,
@@ -3719,9 +3715,7 @@
     }
   /* This is sometimes needed in the middle of GC.  */
   obsize &= ~ARRAY_MARK_FLAG;
-  /* Combining next two lines breaks VMS C 2.3.  */
-  hash = hash_string (ptr, size_byte);
-  hash %= obsize;
+  hash = hash_string (ptr, size_byte) % obsize;
   bucket = XVECTOR (obarray)->contents[hash];
   oblookup_last_bucket_number = hash;
   if (EQ (bucket, make_number (0)))
--- a/src/m/vax.h	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/m/vax.h	Thu Jul 31 05:33:56 2008 +0000
@@ -25,11 +25,6 @@
 NOTE-START
 The vax (-machine=vax) runs zillions of different operating systems.

-Vax running VMS (-opsystem=vms)
-
-  18.36 believed to work.  Addition of features is necessary to make
-  this Emacs version more usable.
-
 NOTE-END  */

 /* Define WORDS_BIG_ENDIAN if lowest-numbered byte in a word
@@ -57,18 +52,6 @@

 #endif /* BSD_SYSTEM */

-#ifdef VMS
-
-/* Data type of load average, as read out of driver.  */
-
-#define LOAD_AVE_TYPE float
-
-/* Convert that into an integer that is 100 for a load average of 1.0  */
-
-#define LOAD_AVE_CVT(x) ((int) ((x) * 100.0))
-
-#endif /* VMS */
-
 #ifdef BSD4_2
 #define HAVE_FTIME
 #endif
--- a/src/ndir.h	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/ndir.h	Thu Jul 31 05:33:56 2008 +0000
@@ -7,30 +7,13 @@
  * copyright, constituting the only possible expression of the
  * algorithm in this format.
  */
-#ifdef VMS
-#ifndef FAB$C_BID
-#include <fab.h>
-#endif
-#ifndef NAM$C_BID
-#include <nam.h>
-#endif
-#ifndef RMS$_SUC
-#include <rmsdef.h>
-#endif
-#include "vmsdir.h"
-#endif /* VMS */

 #define DIRBLKSIZ	512		/* size of directory block */
-#ifdef VMS
-#define MAXNAMLEN	(DIR$S_NAME + 7) /* 80 plus room for version #.  */
-#define MAXFULLSPEC	NAM$C_MAXRSS /* Maximum full spec */
-#else
 #ifdef WINDOWSNT
 #define MAXNAMLEN	255
 #else  /* not WINDOWSNT */
 #define MAXNAMLEN	15		/* maximum filename length */
 #endif /* not WINDOWSNT */
-#endif /* VMS */
 	/* NOTE:  MAXNAMLEN must be one less than a multiple of 4 */

 struct direct				/* data from readdir() */
--- a/src/param.h	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,5 +0,0 @@
-/* This is so that Emacs can run on VMS... */
-#define EXEC_PAGESIZE 512
-
-/* arch-tag: a6daea28-33a6-4dd3-97d8-5ee1a12f09d3
-   (do not change this comment) */
--- a/src/print.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/print.c	Thu Jul 31 05:33:56 2008 +0000
@@ -167,11 +167,6 @@

 extern int minibuffer_auto_raise;

-#ifdef MAX_PRINT_CHARS
-static int print_chars;
-static int max_print;
-#endif /* MAX_PRINT_CHARS */
-
 void print_interval ();

 /* GDB resets this to zero on W32 to disable OutputDebugString calls.  */
@@ -309,11 +304,6 @@
      unsigned int ch;
      Lisp_Object fun;
 {
-#ifdef MAX_PRINT_CHARS
-  if (max_print)
-    print_chars++;
-#endif /* MAX_PRINT_CHARS */
-
   if (!NILP (fun) && !EQ (fun, Qt))
     call1 (fun, make_number (ch));
   else
@@ -382,11 +372,6 @@
       bcopy (ptr, print_buffer + print_buffer_pos_byte, size_byte);
       print_buffer_pos += size;
       print_buffer_pos_byte += size_byte;
-
-#ifdef MAX_PRINT_CHARS
-      if (max_print)
-        print_chars += size;
-#endif /* MAX_PRINT_CHARS */
     }
   else if (noninteractive && EQ (printcharfun, Qt))
     {
@@ -419,11 +404,6 @@
 	      insert_char (ch);
 	    }
 	}
-
-#ifdef MAX_PRINT_CHARS
-      if (max_print)
-        print_chars += size;
-#endif /* MAX_PRINT_CHARS */
     }
   else
     {
@@ -764,9 +744,6 @@
 {
   PRINTDECLARE;

-#ifdef MAX_PRINT_CHARS
-  max_print = 0;
-#endif /* MAX_PRINT_CHARS */
   if (NILP (printcharfun))
     printcharfun = Vstandard_output;
   PRINTPREPARE;
@@ -900,10 +877,6 @@
   PRINTDECLARE;
   struct gcpro gcpro1;

-#ifdef MAX_PRINT_CHARS
-  print_chars = 0;
-  max_print = MAX_PRINT_CHARS;
-#endif /* MAX_PRINT_CHARS */
   if (NILP (printcharfun))
     printcharfun = Vstandard_output;
   GCPRO1 (object);
@@ -912,10 +885,6 @@
   print (object, printcharfun, 1);
   PRINTCHAR ('\n');
   PRINTFINISH;
-#ifdef MAX_PRINT_CHARS
-  max_print = 0;
-  print_chars = 0;
-#endif /* MAX_PRINT_CHARS */
   UNGCPRO;
   return object;
 }
@@ -1614,14 +1583,6 @@

   print_depth++;

-#ifdef MAX_PRINT_CHARS
-  if (max_print && print_chars > max_print)
-    {
-      PRINTCHAR ('\n');
-      print_chars = 0;
-    }
-#endif /* MAX_PRINT_CHARS */
-
   switch (XTYPE (obj))
     {
     case Lisp_Int:
--- a/src/process.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/process.c	Thu Jul 31 05:33:56 2008 +0000
@@ -159,11 +159,7 @@
 #endif /* HAVE_SOCKETS */

 /* Define first descriptor number available for subprocesses.  */
-#ifdef VMS
-#define FIRST_PROC_DESC 1
-#else /* Not VMS */
 #define FIRST_PROC_DESC 3
-#endif

 /* Define SIGCHLD as an alias for SIGCLD.  There are many conditionals
    testing SIGCHLD.  */
@@ -192,9 +188,6 @@
 #ifndef USE_CRT_DLL
 extern int errno;
 #endif
-#ifdef VMS
-extern char *sys_errlist[];
-#endif

 #ifndef HAVE_H_ERRNO
 extern int h_errno;
@@ -1417,12 +1410,7 @@
 	{
 	  Lisp_Object tem;
 	  tem = Fcar (Fcdr (p->status));
-#ifdef VMS
-	  if (XINT (tem) < NSIG)
-	    write_string (sys_errlist [XINT (tem)], -1);
-	  else
-#endif
-	    Fprinc (symbol, Qnil);
+	  Fprinc (symbol, Qnil);
 	}
       else if (NETCONN1_P (p) || SERIALCONN1_P (p))
 	{
@@ -1587,12 +1575,7 @@
      register Lisp_Object *args;
 {
   Lisp_Object buffer, name, program, proc, current_dir, tem;
-#ifdef VMS
-  register unsigned char *new_argv;
-  int len;
-#else
   register unsigned char **new_argv;
-#endif
   register int i;
   int count = SPECPDL_INDEX ();

@@ -1709,28 +1692,6 @@
     XPROCESS (proc)->encode_coding_system = val;
   }

-#ifdef VMS
-  /* Make a one member argv with all args concatenated
-     together separated by a blank.  */
-  len = SBYTES (program) + 2;
-  for (i = 3; i < nargs; i++)
-    {
-      tem = args[i];
-      CHECK_STRING (tem);
-      len += SBYTES (tem) + 1;	/* count the blank */
-    }
-  new_argv = (unsigned char *) alloca (len);
-  strcpy (new_argv, SDATA (program));
-  for (i = 3; i < nargs; i++)
-    {
-      tem = args[i];
-      CHECK_STRING (tem);
-      strcat (new_argv, " ");
-      strcat (new_argv, SDATA (tem));
-    }
-  /* Need to add code here to check for program existence on VMS */
-
-#else /* not VMS */
   new_argv = (unsigned char **) alloca ((nargs - 1) * sizeof (char *));

   /* If program file name is not absolute, search our path for it.
@@ -1782,7 +1743,6 @@
       new_argv[i - 2] = SDATA (tem);
     }
   new_argv[i - 2] = 0;
-#endif /* not VMS */

   XPROCESS (proc)->decoding_buf = make_uninit_string (0);
   XPROCESS (proc)->decoding_carryover = 0;
@@ -1841,7 +1801,6 @@
 #endif
 #endif

-#ifndef VMS /* VMS version of this function is in vmsproc.c.  */
 void
 create_process (process, new_argv, current_dir)
      Lisp_Object process;
@@ -2285,7 +2244,6 @@
   if (pid < 0)
     report_file_error ("Doing vfork", Qnil);
 }
-#endif /* not VMS */


 #ifdef HAVE_SOCKETS
@@ -4098,19 +4056,9 @@
     {
       /* Beware SIGCHLD hereabouts. */
       flush_pending_output (inchannel);
-#ifdef VMS
-      {
-	VMS_PROC_STUFF *get_vms_process_pointer (), *vs;
-	sys$dassgn (outchannel);
-	vs = get_vms_process_pointer (p->pid);
-	if (vs)
-	  give_back_vms_process_stuff (vs);
-      }
-#else
       emacs_close (inchannel);
       if (outchannel >= 0 && outchannel != inchannel)
  	emacs_close (outchannel);
-#endif

       p->infd  = -1;
       p->outfd = -1;
@@ -5231,37 +5179,6 @@
   int carryover = p->decoding_carryover;
   int readmax = 4096;

-#ifdef VMS
-  VMS_PROC_STUFF *vs, *get_vms_process_pointer();
-
-  vs = get_vms_process_pointer (p->pid);
-  if (vs)
-    {
-      if (!vs->iosb[0])
-	return (0);		/* Really weird if it does this */
-      if (!(vs->iosb[0] & 1))
-	return -1;		/* I/O error */
-    }
-  else
-    error ("Could not get VMS process pointer");
-  chars = vs->inputBuffer;
-  nbytes = clean_vms_buffer (chars, vs->iosb[1]);
-  if (nbytes <= 0)
-    {
-      start_vms_process_read (vs); /* Crank up the next read on the process */
-      return 1;			/* Nothing worth printing, say we got 1 */
-    }
-  if (carryover > 0)
-    {
-      /* The data carried over in the previous decoding (which are at
-         the tail of decoding buffer) should be prepended to the new
-         data read to decode all together.  */
-      chars = (char *) alloca (nbytes + carryover);
-      bcopy (SDATA (p->decoding_buf), buf, carryover);
-      bcopy (vs->inputBuffer, chars + carryover, nbytes);
-    }
-#else /* not VMS */
-
   chars = (char *) alloca (carryover + readmax);
   if (carryover)
     /* See the comment above.  */
@@ -5318,7 +5235,6 @@
       else
 	nbytes = nbytes + 1;
     }
-#endif /* not VMS */

   p->decoding_carryover = 0;

@@ -5441,9 +5357,6 @@
 	if (waiting_for_user_input_p == -1)
 	  record_asynch_buffer_change ();

-#ifdef VMS
-      start_vms_process_read (vs);
-#endif
       unbind_to (count, Qnil);
       return nbytes;
     }
@@ -5566,9 +5479,6 @@
       SET_PT_BOTH (opoint, opoint_byte);
       set_buffer_internal (old);
     }
-#ifdef VMS
-  start_vms_process_read (vs);
-#endif
   return nbytes;
 }

@@ -5620,10 +5530,6 @@

   GCPRO1 (object);

-#ifdef VMS
-  VMS_PROC_STUFF *vs, *get_vms_process_pointer();
-#endif /* VMS */
-
   if (p->raw_status_new)
     update_status (p);
   if (! EQ (p->status, Qrun))
@@ -5704,14 +5610,6 @@
       buf = SDATA (coding->dst_object);
     }

-#ifdef VMS
-  vs = get_vms_process_pointer (p->pid);
-  if (vs == 0)
-    error ("Could not find this process: %x", p->pid);
-  else if (write_to_vms_process (vs, buf, len))
-    ;
-#else /* not VMS */
-
   if (pty_max_bytes == 0)
     {
 #if defined (HAVE_FPATHCONF) && defined (_PC_MAX_CANON)
@@ -5873,23 +5771,16 @@
 	    Fprocess_send_eof (proc);
 	}
     }
-#endif /* not VMS */
   else
     {
       signal (SIGPIPE, old_sigpipe);
-#ifndef VMS
       proc = process_sent_to;
       p = XPROCESS (proc);
-#endif
       p->raw_status_new = 0;
       p->status = Fcons (Qexit, Fcons (make_number (256), Qnil));
       p->tick = ++process_tick;
       deactivate_process (proc);
-#ifdef VMS
-      error ("Error writing to process %s; closed it", SDATA (p->name));
-#else
       error ("SIGPIPE raised on process %s; closed it", SDATA (p->name));
-#endif
     }

   UNGCPRO;
@@ -6193,20 +6084,8 @@
       break;
 #endif /* ! defined (SIGCONT) */
     case SIGINT:
-#ifdef VMS
-      send_process (proc, "\003", 1, Qnil);	/* ^C */
-      goto whoosh;
-#endif
     case SIGQUIT:
-#ifdef VMS
-      send_process (proc, "\031", 1, Qnil);	/* ^Y */
-      goto whoosh;
-#endif
     case SIGKILL:
-#ifdef VMS
-      sys$forcex (&(p->pid), 0, 1);
-      whoosh:
-#endif
       flush_pending_output (p->infd);
       break;
     }
@@ -6547,9 +6426,6 @@
       send_process (proc, "", 0, Qnil);
     }

-#ifdef VMS
-  send_process (proc, "\032", 1, Qnil); 	/* ^z */
-#else
   if (XPROCESS (proc)->pty_flag)
     send_process (proc, "\004", 1, Qnil);
   else if (EQ (XPROCESS (proc)->type, Qserial))
@@ -6594,7 +6470,6 @@

       XPROCESS (proc)->outfd = new_outfd;
     }
-#endif /* VMS */
   return process;
 }
--- a/src/process.h	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/process.h	Thu Jul 31 05:33:56 2008 +0000
@@ -152,7 +152,7 @@
 extern int synch_process_retcode;

 /* The name of the file open to get a null file, or a data sink.
-   VMS, MS-DOS, and OS/2 redefine this.  */
+   MS-DOS, and OS/2 redefine this.  */
 #ifndef NULL_DEVICE
 #define NULL_DEVICE "/dev/null"
 #endif
--- a/src/s/msdos.h	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/s/msdos.h	Thu Jul 31 05:33:56 2008 +0000
@@ -40,7 +40,6 @@

 #define DOS_NT	/* MSDOS or WINDOWSNT */
 #undef BSD_SYSTEM
-#undef VMS

 /* SYSTEM_TYPE should indicate the kind of system you are using.
  It sets the Lisp variable system-type.  */
--- a/src/s/template.h	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/s/template.h	Thu Jul 31 05:33:56 2008 +0000
@@ -31,7 +31,6 @@
 /* #define BSD4_2 */
 /* #define BSD4_3 */
 /* #define BSD_SYSTEM */
-/* #define VMS */

 /* SYSTEM_TYPE should indicate the kind of system you are using.
  It sets the Lisp variable system-type.  */
@@ -93,13 +92,6 @@

 #define HAVE_PTYS

-/*
- *	Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate
- *      The 4.2 opendir, etc., library functions.
- */
-
-#define NONSYSTEM_DIR_LIBRARY
-
 /* Define this symbol if your system has the functions bcopy, etc. */

 #define BSTRING
--- a/src/s/vms.h	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,192 +0,0 @@
-/* system description header for VMS
-   Copyright (C) 1986, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
-                 2008  Free Software Foundation, Inc.
-
-This file is part of GNU Emacs.
-
-GNU Emacs is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-
-GNU Emacs is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.  */
-
-/*
- *	Define symbols to identify the version of Unix this is.
- *	Define all the symbols that apply correctly.
- */
-
-#ifndef VMS		    /* Decus cpp doesn't define this but VAX C does */
-#define VMS
-#endif /* VMS */
-/* Note that this file is used indirectly via vms4-0.h, or some other
-   such file.  These other files define a symbol VMS4_0, VMS4_2, etc.  */
-
-/* SYSTEM_TYPE should indicate the kind of system you are using.
- It sets the Lisp variable system-type.  */
-
-#define SYSTEM_TYPE "vax-vms"
-
-/* Letter to use in finding device name of first pty,
-  if system supports pty's.  'a' means it is /dev/ptya0  */
-
-#define FIRST_PTY_LETTER 'a'
-
-/*
- *	Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate
- *      The 4.2 opendir, etc., library functions.
- */
-
-#define NONSYSTEM_DIR_LIBRARY
-
-/* Define the maximum record length for print strings, if needed. */
-
-#define MAX_PRINT_CHARS 300
-
-
-/* Here, on a separate page, add any special hacks needed
-   to make Emacs work on this system.  For example,
-   you might define certain system call names that don't
-   exist on your system, or that do different things on
-   your system and must be used only through an encapsulation
-   (Which you should place, by convention, in sysdep.c).  */
-
-/* In olden days, VMS filenames did not support hyphen (i.e., the "-"
-   character).  You can #undef this in vmsX-Y.h for newer versions.  */
-
-#define NO_HYPHENS_IN_FILENAMES
-
-/* Do you have the sharable library bug?  If you link with a sharable
-   library that contains psects with the NOSHR attribute and also refer to
-   those psects in your program, the linker give you a private version of
-   the psect which is not related to the version used by the sharable
-   library.  The end result is that your references to variables in that
-   psect have absolutely nothing to do with library references to what is
-   supposed to be the same variable.  If you intend to link with the standard
-   C library (NOT the sharable one) you don't need to define this.  (This
-   is NOT fixed in V4.4...) */
-
-#define SHARABLE_LIB_BUG
-
-/* Partially due to the above mentioned bug and also so that we don't need
-   to require that people have a sharable C library, the default for Emacs
-   is to link with the non-shared library.  If you want to link with the
-   shared library, define this and remake xmakefile and fileio.c. This allows
-   us to ship a guaranteed executable image. */
-
-#define LINK_CRTL_SHARE
-
-/* Define this if you want to read the file SYS$SYSTEM:SYSUAF.DAT for user
-   information.  If you do use this, you must either make SYSUAF.DAT world
-   readable or install Emacs with SYSPRV.  */
-
-/* #define READ_SYSUAF */
-
-/* Traditionally, filenames on VMS are always upper case.  */
-
-#define FILE_SYSTEM_CASE Fupcase
-
-/* On VMS these have a different name */
-
-#define index strchr
-#define rindex strrchr
-#define unlink delete
-
-#ifndef __GNUC__
-extern double mth$dmod(double, double);
-#endif
-
-/* Some time routines are missing in the VAX C RTL, or needs some
-   extra bit of code */
-#define tzset sys_tzset
-#define localtime sys_localtime
-#define gmtime sys_gmtime
-
-/* On later versions of VMS these exist in the C run time library, but
-   we are using our own implementations.  Hide their names to avoid
-   linker errors */
-#define rename sys_rename
-#define execvp sys_execvp
-#define system sys_system
-
-#ifndef GNU_MALLOC
-/* Hide these names so that we don't get linker errors */
-#define malloc sys_malloc
-#define free sys_free
-#define realloc sys_realloc
-#define calloc sys_calloc
-
-/* Don't use the standard brk and sbrk */
-#define sbrk sys_sbrk
-#define brk sys_brk
-#endif
-
-/* On VMS we want to avoid reading and writing very large amounts of
-   data at once, so we redefine read and write here. */
-
-#define read sys_read
-#define write sys_write
-
-/* sys_creat just calls the real creat with additional args of
-   "rfm=var", "rat=cr" to get "normal" VMS files... */
-#define creat sys_creat
-
-/* fwrite forces an RMS PUT on every call.  This is abysmally slow, so
-   we emulate fwrite with fputc, which forces buffering and is much
-   faster! */
-#define fwrite sys_fwrite
-
-/* getuid only returns the member number, which is not unique on most VMS
-   systems.  We emulate it with (getgid()<<16 | getuid()). */
-#define getuid sys_getuid
-
-/* If user asks for TERM, check first for EMACS_TERM.  */
-#define getenv sys_getenv
-
-/* Standard C abort is less useful than it should be. */
-#define abort sys_abort
-
-/* Case conflicts with C library fread. */
-#define Fread F_read
-
-/* Case conflicts with C library srandom. */
-#define Srandom S_random
-
-/* Cause initialization of vmsfns.c to be run.  */
-#define SYMS_SYSTEM syms_of_vmsfns ()
-
-/* VAXCRTL access doesn't deal with SYSPRV very well (among other oddities...)
-   Here, we use $CHKPRO to really determine access. */
-#define access sys_access
-
-#define	PAGESIZE	512
-
-#define	_longjmp	longjmp
-#define	_setjmp		setjmp
-
-globalref char sdata[];
-#define DATA_START (((int) sdata + 511) & ~511)
-#define TEXT_START 512
-
-#define PURESIZE 330000
-
-/* Stdio FILE type has extra indirect on VMS, so must alter this macro.  */
-
-#define PENDING_OUTPUT_COUNT(FILE) ((*(FILE))->_ptr - (*(FILE))->_base)
-
-#define NULL_DEVICE "NLA0:"
-
-/* Case conflict with Xlib XFree () */
-#define xfree emacs_xfree
-
-/* What separator do we use in paths?  */
-#define SEPCHAR ','
-
-/* arch-tag: 76bc2b70-46d1-4334-8f12-955c0d0ca6d4
-   (do not change this comment) */
--- a/src/sysdep.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/sysdep.c	Thu Jul 31 05:33:56 2008 +0000
@@ -90,32 +90,7 @@
 #endif
 #endif

-#ifdef VMS
-#include <rms.h>
-#include <ttdef.h>
-#include <tt2def.h>
-#include <iodef.h>
-#include <ssdef.h>
-#include <descrip.h>
-#include <fibdef.h>
-#include <atrdef.h>
-#include <ctype.h>
-#include <string.h>
-#ifdef __GNUC__
 #include <sys/file.h>
-#else
-#include <file.h>
-#endif
-#undef F_SETFL
-#ifndef RAB$C_BID
-#include <rab.h>
-#endif
-#define MAXIOSIZE (32 * PAGESIZE) /* Don't I/O more than 32 blocks at a time */
-#endif /* VMS */
-
-#ifndef VMS
-#include <sys/file.h>
-#endif /* not VMS */

 #ifdef HAVE_FCNTL_H
 #include <fcntl.h>
@@ -159,10 +134,6 @@
 extern char *getwd (char *);
 #endif

-#ifdef NONSYSTEM_DIR_LIBRARY
-#include "ndir.h"
-#endif /* NONSYSTEM_DIR_LIBRARY */
-
 #include "syssignal.h"
 #include "systime.h"
 #ifdef HAVE_UTIME_H
@@ -297,12 +268,6 @@
   if (noninteractive)
     return;

-#ifdef VMS
-  end_kbd_input ();
-  SYS$QIOW (0, fileno (CURTTY()->input), IO$_READVBLK|IO$M_PURGE, input_iosb, 0, 0,
-	    &buf.main, 0, 0, terminator_mask, 0, 0);
-  queue_kbd_input ();
-#else /* not VMS */
 #ifdef MSDOS    /* Demacs 1.1.1 91/10/16 HIRANO Satoshi */
   while (dos_keyread () != -1)
     ;
@@ -319,7 +284,6 @@
       }
   }
 #endif /* not MSDOS */
-#endif /* not VMS */
 #endif /* not WINDOWSNT */
 }

@@ -357,20 +321,13 @@
 #ifdef DOS_NT
     emacs_ospeed = 15;
 #else  /* not DOS_NT */
-#ifdef VMS
-      struct sensemode sg;
-
-      SYS$QIOW (0, fd, IO$_SENSEMODE, &sg, 0, 0,
-		&sg.class, 12, 0, 0, 0, 0 );
-      emacs_ospeed = sg.xmit_baud;
-#else /* not VMS */
 #ifdef HAVE_TERMIOS
       struct termios sg;

       sg.c_cflag = B9600;
       tcgetattr (fd, &sg);
       emacs_ospeed = cfgetospeed (&sg);
-#else /* neither VMS nor TERMIOS */
+#else /* not TERMIOS */
 #ifdef HAVE_TERMIO
       struct termio sg;

@@ -381,7 +338,7 @@
       ioctl (fd, TCGETA, &sg);
 #endif
       emacs_ospeed = sg.c_cflag & CBAUD;
-#else /* neither VMS nor TERMIOS nor TERMIO */
+#else /* neither TERMIOS nor TERMIO */
       struct sgttyb sg;

       sg.sg_ospeed = B9600;
@@ -390,7 +347,6 @@
       emacs_ospeed = sg.sg_ospeed;
 #endif /* not HAVE_TERMIO */
 #endif /* not HAVE_TERMIOS */
-#endif /* not VMS */
 #endif /* not DOS_NT */
     }

@@ -443,12 +399,6 @@
   while (1)
     {
 #ifdef subprocesses
-#ifdef VMS
-      int status;
-
-      status = SYS$FORCEX (&pid, 0, 0);
-      break;
-#else /* not VMS */
 #if defined (BSD_SYSTEM) || defined (HPUX)
       /* Note that kill returns -1 even if the process is just a zombie now.
 	 But inevitably a SIGCHLD interrupt should be generated
@@ -503,7 +453,6 @@
 #endif /* not HAVE_SYSV_SIGPAUSE */
 #endif /* not POSIX_SIGNALS */
 #endif /* not BSD_SYSTEM, and not HPUX version >= 6 */
-#endif /* not VMS */
 #else /* not subprocesses */
 #if __DJGPP__ > 1
       break;
@@ -545,7 +494,6 @@
 #endif
 }

-#ifndef VMS
 /*  Set up the terminal at the other end of a pseudo-terminal that
     we will be controlling an inferior through.
     It should not echo or do line-editing, since that is done
@@ -643,7 +591,6 @@

 #endif /* not DOS_NT */
 }
-#endif /* not VMS */

 #endif /* subprocesses */

@@ -662,47 +609,6 @@
 void
 sys_suspend ()
 {
-#ifdef VMS
-  /* "Foster" parentage allows emacs to return to a subprocess that attached
-     to the current emacs as a cheaper than starting a whole new process.  This
-     is set up by KEPTEDITOR.COM.  */
-  unsigned long parent_id, foster_parent_id;
-  char *fpid_string;
-
-  fpid_string = getenv ("EMACS_PARENT_PID");
-  if (fpid_string != NULL)
-    {
-      sscanf (fpid_string, "%x", &foster_parent_id);
-      if (foster_parent_id != 0)
-	parent_id = foster_parent_id;
-      else
-	parent_id = getppid ();
-    }
-  else
-    parent_id = getppid ();
-
-  xfree (fpid_string);		/* On VMS, this was malloc'd */
-
-  if (parent_id && parent_id != 0xffffffff)
-    {
-      SIGTYPE (*oldsig)() = (int) signal (SIGINT, SIG_IGN);
-      int status = LIB$ATTACH (&parent_id) & 1;
-      signal (SIGINT, oldsig);
-      return status;
-    }
-  else
-    {
-      struct {
-	int	l;
-	char	*a;
-      } d_prompt;
-      d_prompt.l = sizeof ("Emacs: ");		/* Our special prompt */
-      d_prompt.a = "Emacs: ";			/* Just a reminder */
-      LIB$SPAWN (0, 0, 0, 0, 0, 0, 0, 0, 0, 0, &d_prompt, 0);
-      return 1;
-    }
-  return -1;
-#else
 #if defined (SIGTSTP) && !defined (MSDOS)

   {
@@ -724,7 +630,6 @@

 #endif /* no USG_JOBCTRL */
 #endif /* no SIGTSTP */
-#endif /* not VMS */
 }

 /* Fork a subshell.  */
@@ -732,7 +637,6 @@
 void
 sys_subshell ()
 {
-#ifndef VMS
 #ifdef DOS_NT	/* Demacs 1.1.2 91/10/20 Manabu Higashida */
   int st;
   char oldwd[MAXPATHLEN+1]; /* Fixed length is safe on MSDOS.  */
@@ -858,7 +762,6 @@
 #endif
   restore_signal_handlers (saved_handlers);
   synch_process_alive = 0;
-#endif /* !VMS */
 }

 static void
@@ -1076,14 +979,6 @@
     return -1;

 #else
-#ifdef VMS
-  /* Vehemently Monstrous System?  :-)  */
-  if (! (SYS$QIOW (0, fd, IO$_SENSEMODE, settings, 0, 0,
-		   &settings->main.class, 12, 0, 0, 0, 0)
-	 & 1))
-    return -1;
-
-#else
 #ifndef DOS_NT
   /* I give up - I hope you have the BSD ioctls.  */
   if (ioctl (fd, TIOCGETP, &settings->main) < 0)
@@ -1091,7 +986,6 @@
 #endif /* not DOS_NT */
 #endif
 #endif
-#endif

   /* Suivant - Do we have to get struct ltchars data?  */
 #ifdef HAVE_LTCHARS
@@ -1168,14 +1062,6 @@
     return -1;

 #else
-#ifdef VMS
-  /* Vehemently Monstrous System?  :-)  */
-  if (! (SYS$QIOW (0, fd, IO$_SETMODE, &input_iosb, 0, 0,
-		   &settings->main.class, 12, 0, 0, 0, 0)
-	 & 1))
-    return -1;
-
-#else
 #ifndef DOS_NT
   /* I give up - I hope you have the BSD ioctls.  */
   if (ioctl (fd, (flushp) ? TIOCSETP : TIOCSETN, &settings->main) < 0)
@@ -1184,7 +1070,6 @@

 #endif
 #endif
-#endif

   /* Suivant - Do we have to get struct ltchars data?  */
 #ifdef HAVE_LTCHARS
@@ -1253,25 +1138,6 @@
   if (!tty_out->output)
     return;                     /* The tty is suspended. */

-#ifdef VMS
-  if (!input_ef)
-    input_ef = get_kbd_event_flag ();
-    /* LIB$GET_EF (&input_ef); */
-  SYS$CLREF (input_ef);
-  waiting_for_ast = 0;
-  if (!timer_ef)
-    timer_ef = get_timer_event_flag ();
-    /* LIB$GET_EF (&timer_ef); */
-  SYS$CLREF (timer_ef);
-  if (input_ef / 32 != timer_ef / 32)
-    croak ("Input and timer event flags in different clusters.");
-  timer_eflist = ((unsigned) 1 << (input_ef % 32)) |
-    ((unsigned) 1 << (timer_ef % 32));
-#ifndef VMS4_4
-  sys_access_reinit ();
-#endif
-#endif /* VMS */
-
 #ifdef BSD_PGRPS
 #if 0
   /* read_socket_hook is not global anymore.  I think doing this
@@ -1431,16 +1297,6 @@
   tty.main.c_iflag &= ~BRKINT;
 #endif
 #else /* if not HAVE_TERMIO */
-#ifdef VMS
-  tty.main.tt_char |= TT$M_NOECHO;
-  if (meta_key)
-    tty.main.tt_char |= TT$M_EIGHTBIT;
-  if (tty_out->flow_control)
-    tty.main.tt_char |= TT$M_TTSYNC;
-  else
-    tty.main.tt_char &= ~TT$M_TTSYNC;
-  tty.main.tt2_char |= TT2$M_PASTHRU | TT2$M_XON;
-#else /* not VMS (BSD, that is) */
 #ifndef DOS_NT
   XSETINT (Vtty_erase_char, tty.main.sg_erase);
   tty.main.sg_flags &= ~(ECHO | CRMOD | XTABS);
@@ -1448,7 +1304,6 @@
     tty.main.sg_flags |= ANYP;
   tty.main.sg_flags |= interrupt_input ? RAW : CBREAK;
 #endif /* not DOS_NT */
-#endif /* not VMS (BSD, that is) */
 #endif /* not HAVE_TERMIO */

   /* If going to use CBREAK mode, we must request C-g to interrupt
@@ -1500,14 +1355,6 @@
 #endif
 #endif

-#ifdef VMS
-/*  Appears to do nothing when in PASTHRU mode.
-      SYS$QIOW (0, fileno (tty_out->input), IO$_SETMODE|IO$M_OUTBAND, 0, 0, 0,
-		interrupt_signal, oob_chars, 0, 0, 0, 0);
-*/
-  queue_kbd_input (0);
-#endif /* VMS */
-
 #ifdef F_SETFL
 #ifdef F_GETOWN		/* F_SETFL does not imply existence of F_GETOWN */
   if (interrupt_input)
@@ -1529,9 +1376,6 @@
 #endif /* F_GETOWN */
 #endif /* F_SETFL */

-#ifdef VMS  /* VMS sometimes has this symbol but lacks setvbuf.  */
-#undef _IOFBF
-#endif
 #ifdef _IOFBF
   /* This symbol is defined on recent USG systems.
      Someone says without this call USG won't really buffer the file
@@ -1625,22 +1469,6 @@
     }

 #else
-#ifdef VMS
-
-  /* Use a fresh channel since the current one may have stale info
-     (for example, from prior to a suspend); and to avoid a dependency
-     in the init sequence.  */
-  int chan;
-  struct sensemode tty;
-
-  SYS$ASSIGN (&input_dsc, &chan, 0, 0);
-  SYS$QIOW (0, chan, IO$_SENSEMODE, &tty, 0, 0,
-            &tty.class, 12, 0, 0, 0, 0);
-  SYS$DASSGN (chan);
-  *widthp = tty.scr_wid;
-  *heightp = tty.scr_len;
-
-#else
 #ifdef MSDOS
   *widthp = ScreenCols ();
   *heightp = ScreenRows ();
@@ -1648,7 +1476,6 @@
   *widthp = 0;
   *heightp = 0;
 #endif
-#endif /* not VMS */
 #endif /* not SunOS-style */
 #endif /* not BSD-style */
 }
@@ -1822,270 +1649,7 @@
 }
 #endif /* HAVE_PTYS */

-#ifdef VMS
-
-/* Assigning an input channel is done at the start of Emacs execution.
-   This is called each time Emacs is resumed, also, but does nothing
-   because input_chain is no longer zero.  */
-
-void
-init_vms_input ()
-{
-  int status;
-
-  if (fileno (CURTTY ()->input)) == 0)
-    {
-      status = SYS$ASSIGN (&input_dsc, &fileno (CURTTY ()->input)), 0, 0);
-      if (! (status & 1))
-	LIB$STOP (status);
-    }
-}
-
-/* Deassigning the input channel is done before exiting.  */
-
-void
-stop_vms_input ()
-{
-  return SYS$DASSGN (fileno (CURTTY ()->input)));
-}
-
-short input_buffer;
-
-/* Request reading one character into the keyboard buffer.
-   This is done as soon as the buffer becomes empty.  */
-
-void
-queue_kbd_input ()
-{
-  int status;
-  extern kbd_input_ast ();
-
-  waiting_for_ast = 0;
-  stop_input = 0;
-  status = SYS$QIO (0, fileno (CURTTY()->input), IO$_READVBLK,
-		    &input_iosb, kbd_input_ast, 1,
-		    &input_buffer, 1, 0, terminator_mask, 0, 0);
-}
-
-int input_count;
-
-/* Ast routine that is called when keyboard input comes in
-   in accord with the SYS$QIO above.  */
-
-void
-kbd_input_ast ()
-{
-  register int c = -1;
-  int old_errno = errno;
-  extern EMACS_TIME *input_available_clear_time;
-
-  if (waiting_for_ast)
-    SYS$SETEF (input_ef);
-  waiting_for_ast = 0;
-  input_count++;
-#ifdef ASTDEBUG
-  if (input_count == 25)
-    exit (1);
-  printf ("Ast # %d,", input_count);
-  printf (" iosb = %x, %x, %x, %x",
-	  input_iosb.offset, input_iosb.status, input_iosb.termlen,
-	  input_iosb.term);
-#endif
-  if (input_iosb.offset)
-    {
-      c = input_buffer;
-#ifdef ASTDEBUG
-      printf (", char = 0%o", c);
-#endif
-    }
-#ifdef ASTDEBUG
-  printf ("\n");
-  fflush (stdout);
-  sleep (1);
-#endif
-  if (! stop_input)
-    queue_kbd_input ();
-  if (c >= 0)
-    {
-      struct input_event e;
-      EVENT_INIT (e);
-
-      e.kind = ASCII_KEYSTROKE_EVENT;
-      XSETINT (e.code, c);
-      e.frame_or_window = selected_frame;
-      kbd_buffer_store_event (&e);
-    }
-  if (input_available_clear_time)
-    EMACS_SET_SECS_USECS (*input_available_clear_time, 0, 0);
-  errno = old_errno;
-}
-
-/* Wait until there is something in kbd_buffer.  */
-
-void
-wait_for_kbd_input ()
-{
-  extern int have_process_input, process_exited;
-
-  /* If already something, avoid doing system calls.  */
-  if (detect_input_pending ())
-    {
-      return;
-    }
-  /* Clear a flag, and tell ast routine above to set it.  */
-  SYS$CLREF (input_ef);
-  waiting_for_ast = 1;
-  /* Check for timing error: ast happened while we were doing that.  */
-  if (!detect_input_pending ())
-    {
-      /* No timing error: wait for flag to be set.  */
-      set_waiting_for_input (0);
-      SYS$WFLOR (input_ef, input_eflist);
-      clear_waiting_for_input ();
-      if (!detect_input_pending ())
-	/* Check for subprocess input availability */
-	{
-	  int dsp = have_process_input || process_exited;
-
-	  SYS$CLREF (process_ef);
-	  if (have_process_input)
-	    process_command_input ();
-	  if (process_exited)
-	    process_exit ();
-	  if (dsp)
-	    {
-	      update_mode_lines++;
-	      prepare_menu_bars ();
-	      redisplay_preserve_echo_area (18);
-	    }
-	}
-    }
-  waiting_for_ast = 0;
-}
-
-/* Get rid of any pending QIO, when we are about to suspend
-   or when we want to throw away pending input.
-   We wait for a positive sign that the AST routine has run
-   and therefore there is no I/O request queued when we return.
-   SYS$SETAST is used to avoid a timing error.  */
-
-void
-end_kbd_input ()
-{
-#ifdef ASTDEBUG
-  printf ("At end_kbd_input.\n");
-  fflush (stdout);
-  sleep (1);
-#endif
-  if (LIB$AST_IN_PROG ())  /* Don't wait if suspending from kbd_buffer_store_event! */
-    {
-      SYS$CANCEL (fileno (CURTTY()->input));
-      return;
-    }
-
-  SYS$SETAST (0);
-  /* Clear a flag, and tell ast routine above to set it.  */
-  SYS$CLREF (input_ef);
-  waiting_for_ast = 1;
-  stop_input = 1;
-  SYS$CANCEL (fileno (CURTTY()->input));
-  SYS$SETAST (1);
-  SYS$WAITFR (input_ef);
-  waiting_for_ast = 0;
-}
-
-/* Wait for either input available or time interval expiry.  */
-
-void
-input_wait_timeout (timeval)
-     int timeval;		/* Time to wait, in seconds */
-{
-  int time [2];
-  static int zero = 0;
-  static int large = -10000000;
-
-  LIB$EMUL (&timeval, &large, &zero, time); 	  /* Convert to VMS format */
-
-  /* If already something, avoid doing system calls.  */
-  if (detect_input_pending ())
-    {
-      return;
-    }
-  /* Clear a flag, and tell ast routine above to set it.  */
-  SYS$CLREF (input_ef);
-  waiting_for_ast = 1;
-  /* Check for timing error: ast happened while we were doing that.  */
-  if (!detect_input_pending ())
-    {
-      /* No timing error: wait for flag to be set.  */
-      SYS$CANTIM (1, 0);
-      if (SYS$SETIMR (timer_ef, time, 0, 1) & 1) /* Set timer */
-	SYS$WFLOR (timer_ef, timer_eflist);	  /* Wait for timer expiry or input */
-    }
-  waiting_for_ast = 0;
-}
-
-/* The standard `sleep' routine works some other way
-   and it stops working if you have ever quit out of it.
-   This one continues to work.  */
-
-sys_sleep (timeval)
-     int timeval;
-{
-  int time [2];
-  static int zero = 0;
-  static int large = -10000000;
-
-  LIB$EMUL (&timeval, &large, &zero, time); 	  /* Convert to VMS format */
-
-  SYS$CANTIM (1, 0);
-  if (SYS$SETIMR (timer_ef, time, 0, 1) & 1) /* Set timer */
-    SYS$WAITFR (timer_ef);	  /* Wait for timer expiry only */
-}
-
-void
-init_sigio (fd)
-     int fd;
-{
-  request_sigio ();
-}
-
-reset_sigio (fd)
-     int fd;
-{
-  unrequest_sigio ();
-}
-
-void
-request_sigio ()
-{
-  if (noninteractive)
-    return;
-  croak ("request sigio");
-}
-
-void
-unrequest_sigio ()
-{
-  if (noninteractive)
-    return;
-  croak ("unrequest sigio");
-}
-
-#endif /* VMS */
-
-/* Note that VMS compiler won't accept defined (CANNOT_DUMP).  */
-#ifndef CANNOT_DUMP
-#define NEED_STARTS
-#endif
-
-#ifndef SYSTEM_MALLOC
-#ifndef NEED_STARTS
-#define NEED_STARTS
-#endif
-#endif
-
-#ifdef NEED_STARTS
+#if !defined(CANNOT_DUMP) || !defined(SYSTEM_MALLOC)
 /* Some systems that cannot dump also cannot implement these.  */

 /*
@@ -2167,12 +1731,10 @@

 extern Lisp_Object Vsystem_name;

-#ifndef VMS
 #ifdef HAVE_SOCKETS
 #include <sys/socket.h>
 #include <netdb.h>
 #endif /* HAVE_SOCKETS */
-#endif /* not VMS */

 #ifdef TRY_AGAIN
 #ifndef HAVE_H_ERRNO
@@ -2183,15 +1745,6 @@
 void
 init_system_name ()
 {
-#ifdef VMS
-  char *sp, *end;
-  if ((sp = egetenv ("SYS$NODE")) == 0)
-    Vsystem_name = build_string ("vax-vms");
-  else if ((end = index (sp, ':')) == 0)
-    Vsystem_name = build_string (sp);
-  else
-    Vsystem_name = make_string (sp, end - sp);
-#else
 #ifndef HAVE_GETHOSTNAME
   struct utsname uts;
   uname (&uts);
@@ -2307,7 +1860,6 @@
 #endif /* HAVE_SOCKETS */
   Vsystem_name = build_string (hostname);
 #endif /* HAVE_GETHOSTNAME */
-#endif /* VMS */
   {
     unsigned char *p;
     for (p = SDATA (Vsystem_name); *p; p++)
@@ -2317,7 +1869,6 @@
 }

 #ifndef MSDOS
-#ifndef VMS
 #if !defined (HAVE_SELECT)

 #include "sysselect.h"
@@ -2557,7 +2108,6 @@
 #endif

 #endif /* not HAVE_SELECT */
-#endif /* not VMS */
 #endif /* not MSDOS */

 /* POSIX signals support - DJB */
@@ -2888,112 +2438,6 @@
 #endif /* need at least 2 */
   return val & ((1L << VALBITS) - 1);
 }
-
-#ifdef VMS
-
-#ifdef getenv
-/* If any place else asks for the TERM variable,
-   allow it to be overridden with the EMACS_TERM variable
-   before attempting to translate the logical name TERM.  As a last
-   resort, ask for VAX C's special idea of the TERM variable.  */
-#undef getenv
-char *
-sys_getenv (name)
-     char *name;
-{
-  register char *val;
-  static char buf[256];
-  static struct dsc$descriptor_s equiv
-    = {sizeof (buf), DSC$K_DTYPE_T, DSC$K_CLASS_S, buf};
-  static struct dsc$descriptor_s d_name
-    = {0, DSC$K_DTYPE_T, DSC$K_CLASS_S, 0};
-  short eqlen;
-
-  if (!strcmp (name, "TERM"))
-    {
-      val = (char *) getenv ("EMACS_TERM");
-      if (val)
-	return val;
-    }
-
-  d_name.dsc$w_length = strlen (name);
-  d_name.dsc$a_pointer = name;
-  if (LIB$SYS_TRNLOG (&d_name, &eqlen, &equiv) == 1)
-    {
-      char *str = (char *) xmalloc (eqlen + 1);
-      bcopy (buf, str, eqlen);
-      str[eqlen] = '\0';
-      /* This is a storage leak, but a pain to fix.  With luck,
-	 no one will ever notice.  */
-      return str;
-    }
-  return (char *) getenv (name);
-}
-#endif /* getenv */
-
-#ifdef abort
-/* Since VMS doesn't believe in core dumps, the only way to debug this beast is
-   to force a call on the debugger from within the image. */
-#undef abort
-sys_abort ()
-{
-  reset_all_sys_modes ();
-  LIB$SIGNAL (SS$_DEBUG);
-}
-#endif /* abort */
-#endif /* VMS */
-
-#ifdef VMS
-#ifdef LINK_CRTL_SHARE
-#ifdef SHARABLE_LIB_BUG
-/* Variables declared noshare and initialized in sharable libraries
-   cannot be shared.  The VMS linker incorrectly forces you to use a private
-   version which is uninitialized... If not for this "feature", we
-   could use the C library definition of sys_nerr and sys_errlist. */
-int sys_nerr = 35;
-char *sys_errlist[] =
-  {
-    "error 0",
-    "not owner",
-    "no such file or directory",
-    "no such process",
-    "interrupted system call",
-    "i/o error",
-    "no such device or address",
-    "argument list too long",
-    "exec format error",
-    "bad file number",
-    "no child process",
-    "no more processes",
-    "not enough memory",
-    "permission denied",
-    "bad address",
-    "block device required",
-    "mount devices busy",
-    "file exists",
-    "cross-device link",
-    "no such device",
-    "not a directory",
-    "is a directory",
-    "invalid argument",
-    "file table overflow",
-    "too many open files",
-    "not a typewriter",
-    "text file busy",
-    "file too big",
-    "no space left on device",
-    "illegal seek",
-    "read-only file system",
-    "too many links",
-    "broken pipe",
-    "math argument",
-    "result too large",
-    "I/O stream empty",
-    "vax/vms specific error code nontranslatable error"
-  };
-#endif /* SHARABLE_LIB_BUG */
-#endif /* LINK_CRTL_SHARE */
-#endif /* VMS */

 #ifndef HAVE_STRERROR
 #ifndef WINDOWSNT
@@ -3225,7 +2669,6 @@
  */

 #ifdef subprocesses
-#ifndef VMS
 #ifndef HAVE_GETTIMEOFDAY
 #ifdef HAVE_TIMEVAL

@@ -3246,8 +2689,7 @@

 #endif
 #endif
-#endif
-#endif /* subprocess && !HAVE_GETTIMEOFDAY && HAVE_TIMEVAL && !VMS */
+#endif /* subprocess && !HAVE_GETTIMEOFDAY && HAVE_TIMEVAL */

 /*
  *	This function will go away as soon as all the stubs fixed. (fnf)
@@ -3292,150 +2734,6 @@
 #endif /* not HAVE_CLOSEDIR */
 #endif /* SYSV_SYSTEM_DIR */

-#ifdef NONSYSTEM_DIR_LIBRARY
-
-DIR *
-opendir (filename)
-     char *filename;	/* name of directory */
-{
-  register DIR *dirp;		/* -> malloc'ed storage */
-  register int fd;		/* file descriptor for read */
-  struct stat sbuf;		/* result of fstat */
-
-  fd = emacs_open (filename, O_RDONLY, 0);
-  if (fd < 0)
-    return 0;
-
-  BLOCK_INPUT;
-  if (fstat (fd, &sbuf) < 0
-      || (sbuf.st_mode & S_IFMT) != S_IFDIR
-      || (dirp = (DIR *) xmalloc (sizeof (DIR))) == 0)
-    {
-      emacs_close (fd);
-      UNBLOCK_INPUT;
-      return 0;		/* bad luck today */
-    }
-  UNBLOCK_INPUT;
-
-  dirp->dd_fd = fd;
-  dirp->dd_loc = dirp->dd_size = 0;	/* refill needed */
-
-  return dirp;
-}
-
-void
-closedir (dirp)
-     register DIR *dirp;		/* stream from opendir */
-{
-  emacs_close (dirp->dd_fd);
-  xfree ((char *) dirp);
-}
-
-
-#ifndef VMS
-#define DIRSIZ	14
-struct olddir
-  {
-    ino_t od_ino; 		/* inode */
-    char od_name[DIRSIZ];	/* filename */
-  };
-#endif /* not VMS */
-
-struct direct dir_static;	/* simulated directory contents */
-
-/* ARGUSED */
-struct direct *
-readdir (dirp)
-     register DIR *dirp;	/* stream from opendir */
-{
-#ifndef VMS
-  register struct olddir *dp;	/* -> directory data */
-#else /* VMS */
-  register struct dir$_name *dp; /* -> directory data */
-  register struct dir$_version *dv; /* -> version data */
-#endif /* VMS */
-
-  for (; ;)
-    {
-      if (dirp->dd_loc >= dirp->dd_size)
-	dirp->dd_loc = dirp->dd_size = 0;
-
-      if (dirp->dd_size == 0 	/* refill buffer */
-	  && (dirp->dd_size = emacs_read (dirp->dd_fd, dirp->dd_buf, DIRBLKSIZ)) <= 0)
-	return 0;
-
-#ifndef VMS
-      dp = (struct olddir *) &dirp->dd_buf[dirp->dd_loc];
-      dirp->dd_loc += sizeof (struct olddir);
-
-      if (dp->od_ino != 0)	/* not deleted entry */
-	{
-	  dir_static.d_ino = dp->od_ino;
-	  strncpy (dir_static.d_name, dp->od_name, DIRSIZ);
-	  dir_static.d_name[DIRSIZ] = '\0';
-	  dir_static.d_namlen = strlen (dir_static.d_name);
-	  dir_static.d_reclen = sizeof (struct direct)
-	    - MAXNAMLEN + 3
-	      + dir_static.d_namlen - dir_static.d_namlen % 4;
-	  return &dir_static;	/* -> simulated structure */
-	}
-#else /* VMS */
-      dp = (struct dir$_name *) dirp->dd_buf;
-      if (dirp->dd_loc == 0)
-	dirp->dd_loc = (dp->dir$b_namecount&1) ? dp->dir$b_namecount + 1
-	  : dp->dir$b_namecount;
-      dv = (struct dir$_version *)&dp->dir$t_name[dirp->dd_loc];
-      dir_static.d_ino = dv->dir$w_fid_num;
-      dir_static.d_namlen = dp->dir$b_namecount;
-      dir_static.d_reclen = sizeof (struct direct)
-	- MAXNAMLEN + 3
-	  + dir_static.d_namlen - dir_static.d_namlen % 4;
-      strncpy (dir_static.d_name, dp->dir$t_name, dp->dir$b_namecount);
-      dir_static.d_name[dir_static.d_namlen] = '\0';
-      dirp->dd_loc = dirp->dd_size; /* only one record at a time */
-      return &dir_static;
-#endif /* VMS */
-    }
-}
-
-#ifdef VMS
-/* readdirver is just like readdir except it returns all versions of a file
-   as separate entries.  */
-
-/* ARGUSED */
-struct direct *
-readdirver (dirp)
-     register DIR *dirp;	/* stream from opendir */
-{
-  register struct dir$_name *dp; /* -> directory data */
-  register struct dir$_version *dv; /* -> version data */
-
-  if (dirp->dd_loc >= dirp->dd_size - sizeof (struct dir$_name))
-    dirp->dd_loc = dirp->dd_size = 0;
-
-  if (dirp->dd_size == 0 	/* refill buffer */
-      && (dirp->dd_size = sys_read (dirp->dd_fd, dirp->dd_buf, DIRBLKSIZ)) <= 0)
-    return 0;
-
-  dp = (struct dir$_name *) dirp->dd_buf;
-  if (dirp->dd_loc == 0)
-    dirp->dd_loc = (dp->dir$b_namecount & 1) ? dp->dir$b_namecount + 1
-		   : dp->dir$b_namecount;
-  dv = (struct dir$_version *) &dp->dir$t_name[dirp->dd_loc];
-  strncpy (dir_static.d_name, dp->dir$t_name, dp->dir$b_namecount);
-  sprintf (&dir_static.d_name[dp->dir$b_namecount], ";%d", dv->dir$w_version);
-  dir_static.d_namlen = strlen (dir_static.d_name);
-  dir_static.d_ino = dv->dir$w_fid_num;
-  dir_static.d_reclen = sizeof (struct direct) - MAXNAMLEN + 3
-			+ dir_static.d_namlen - dir_static.d_namlen % 4;
-  dirp->dd_loc = ((char *) (++dv) - dp->dir$t_name);
-  return &dir_static;
-}
-
-#endif /* VMS */
-
-#endif /* NONSYSTEM_DIR_LIBRARY */
-

 int
 set_file_times (filename, atime, mtime)
@@ -3586,1259 +2884,6 @@
 }
 #endif /* !HAVE_RMDIR */

-
-
-/* Functions for VMS */
-#ifdef VMS
-#include <acldef.h>
-#include <chpdef.h>
-#include <jpidef.h>
-
-/* Return as a string the VMS error string pertaining to STATUS.
-   Reuses the same static buffer each time it is called.  */
-
-char *
-vmserrstr (status)
-     int status;		/* VMS status code */
-{
-  int bufadr[2];
-  short len;
-  static char buf[257];
-
-  bufadr[0] = sizeof buf - 1;
-  bufadr[1] = (int) buf;
-  if (! (SYS$GETMSG (status, &len, bufadr, 0x1, 0) & 1))
-    return "untranslatable VMS error status";
-  buf[len] = '\0';
-  return buf;
-}
-
-#ifdef access
-#undef access
-
-/* The following is necessary because 'access' emulation by VMS C (2.0) does
- * not work correctly.  (It also doesn't work well in version 2.3.)
- */
-
-#ifdef VMS4_4
-
-#define DESCRIPTOR(name,string) struct dsc$descriptor_s name = \
-	{ strlen (string), DSC$K_DTYPE_T, DSC$K_CLASS_S, string }
-
-typedef union {
-    struct {
-	unsigned short s_buflen;
-	unsigned short s_code;
-	char *s_bufadr;
-	unsigned short *s_retlenadr;
-    } s;
-    int end;
-} item;
-#define buflen s.s_buflen
-#define code s.s_code
-#define bufadr s.s_bufadr
-#define retlenadr s.s_retlenadr
-
-#define R_OK 4	/* test for read permission */
-#define W_OK 2	/* test for write permission */
-#define X_OK 1	/* test for execute (search) permission */
-#define F_OK 0	/* test for presence of file */
-
-int
-sys_access (path, mode)
-     char *path;
-     int mode;
-{
-  static char *user = NULL;
-  char dir_fn[512];
-
-  /* translate possible directory spec into .DIR file name, so brain-dead
-   * access can treat the directory like a file.  */
-  if (directory_file_name (path, dir_fn))
-    path = dir_fn;
-
-  if (mode == F_OK)
-    return access (path, mode);
-  if (user == NULL && (user = (char *) getenv ("USER")) == NULL)
-    return -1;
-  {
-    int stat;
-    int flags;
-    int acces;
-    unsigned short int dummy;
-    item itemlst[3];
-    static int constant = ACL$C_FILE;
-    DESCRIPTOR (path_desc, path);
-    DESCRIPTOR (user_desc, user);
-
-    flags = 0;
-    acces = 0;
-    if ((mode & X_OK) && ((stat = access (path, mode)) < 0 || mode == X_OK))
-      return stat;
-    if (mode & R_OK)
-      acces |= CHP$M_READ;
-    if (mode & W_OK)
-      acces |= CHP$M_WRITE;
-    itemlst[0].buflen = sizeof (int);
-    itemlst[0].code = CHP$_FLAGS;
-    itemlst[0].bufadr = (char *) &flags;
-    itemlst[0].retlenadr = &dummy;
-    itemlst[1].buflen = sizeof (int);
-    itemlst[1].code = CHP$_ACCESS;
-    itemlst[1].bufadr = (char *) &acces;
-    itemlst[1].retlenadr = &dummy;
-    itemlst[2].end = CHP$_END;
-    stat = SYS$CHECK_ACCESS (&constant, &path_desc, &user_desc, itemlst);
-    return stat == SS$_NORMAL ? 0 : -1;
-  }
-}
-
-#else /* not VMS4_4 */
-
-#include <prvdef.h>
-#define ACE$M_WRITE     2
-#define ACE$C_KEYID     1
-
-static unsigned short memid, grpid;
-static unsigned int uic;
-
-/* Called from init_sys_modes, so it happens not very often
-   but at least each time Emacs is loaded.  */
-void
-sys_access_reinit ()
-{
-  uic = 0;
-}
-
-int
-sys_access (filename, type)
-     char * filename;
-     int type;
-{
-  struct FAB fab;
-  struct XABPRO xab;
-  int status, size, i, typecode, acl_controlled;
-  unsigned int *aclptr, *aclend, aclbuf[60];
-  union prvdef prvmask;
-
-  /* Get UIC and GRP values for protection checking.  */
-  if (uic == 0)
-    {
-      status = LIB$GETJPI (&JPI$_UIC, 0, 0, &uic, 0, 0);
-      if (! (status & 1))
-	return -1;
-      memid = uic & 0xFFFF;
-      grpid = uic >> 16;
-    }
-
-  if (type != 2)                /* not checking write access */
-    return access (filename, type);
-
-  /* Check write protection. */
-
-#define CHECKPRIV(bit)    (prvmask.bit)
-#define WRITABLE(field)  (! ((xab.xab$w_pro >> field) & XAB$M_NOWRITE))
-
-  /* Find privilege bits */
-  status = SYS$SETPRV (0, 0, 0, prvmask);
-  if (! (status & 1))
-    error ("Unable to find privileges: %s", vmserrstr (status));
-  if (CHECKPRIV (PRV$V_BYPASS))
-    return 0;			/* BYPASS enabled */
-  fab = cc$rms_fab;
-  fab.fab$b_fac = FAB$M_GET;
-  fab.fab$l_fna = filename;
-  fab.fab$b_fns = strlen (filename);
-  fab.fab$l_xab = &xab;
-  xab = cc$rms_xabpro;
-  xab.xab$l_aclbuf = aclbuf;
-  xab.xab$w_aclsiz = sizeof (aclbuf);
-  status = SYS$OPEN (&fab, 0, 0);
-  if (! (status & 1))
-    return -1;
-  SYS$CLOSE (&fab, 0, 0);
-  /* Check system access */
-  if (CHECKPRIV (PRV$V_SYSPRV) && WRITABLE (XAB$V_SYS))
-    return 0;
-  /* Check ACL entries, if any */
-  acl_controlled = 0;
-  if (xab.xab$w_acllen > 0)
-    {
-      aclptr = aclbuf;
-      aclend = &aclbuf[xab.xab$w_acllen / 4];
-      while (*aclptr && aclptr < aclend)
-	{
-	  size = (*aclptr & 0xff) / 4;
-	  typecode = (*aclptr >> 8) & 0xff;
-	  if (typecode == ACE$C_KEYID)
-	    for (i = size - 1; i > 1; i--)
-	      if (aclptr[i] == uic)
-		{
-		  acl_controlled = 1;
-		  if (aclptr[1] & ACE$M_WRITE)
-		    return 0;	/* Write access through ACL */
-		}
-	  aclptr = &aclptr[size];
-	}
-      if (acl_controlled)	/* ACL specified, prohibits write access */
-	return -1;
-    }
-  /* No ACL entries specified, check normal protection */
-  if (WRITABLE (XAB$V_WLD))	/* World writable */
-    return 0;
-  if (WRITABLE (XAB$V_GRP) &&
-      (unsigned short) (xab.xab$l_uic >> 16) == grpid)
-    return 0;			/* Group writable */
-  if (WRITABLE (XAB$V_OWN) &&
-      (xab.xab$l_uic & 0xFFFF) == memid)
-    return 0;			/* Owner writable */
-
-  return -1;	/* Not writable */
-}
-#endif /* not VMS4_4 */
-#endif /* access */
-
-static char vtbuf[NAM$C_MAXRSS+1];
-
-/* translate a vms file spec to a unix path */
-char *
-sys_translate_vms (vfile)
-     char * vfile;
-{
-  char * p;
-  char * targ;
-
-  if (!vfile)
-    return 0;
-
-  targ = vtbuf;
-
-  /* leading device or logical name is a root directory */
-  if (p = strchr (vfile, ':'))
-    {
-      *targ++ = '/';
-      while (vfile < p)
-	*targ++ = *vfile++;
-      vfile++;
-      *targ++ = '/';
-    }
-  p = vfile;
-  if (*p == '[' || *p == '<')
-    {
-      while (*++vfile != *p + 2)
-	switch (*vfile)
-	  {
-	  case '.':
-	    if (vfile[-1] == *p)
-	      *targ++ = '.';
-	    *targ++ = '/';
-	    break;
-
-	  case '-':
-	    *targ++ = '.';
-	    *targ++ = '.';
-	    break;
-
-	  default:
-	    *targ++ = *vfile;
-	    break;
-	  }
-      vfile++;
-      *targ++ = '/';
-    }
-  while (*vfile)
-    *targ++ = *vfile++;
-
-  return vtbuf;
-}
-
-static char utbuf[NAM$C_MAXRSS+1];
-
-/* translate a unix path to a VMS file spec */
-char *
-sys_translate_unix (ufile)
-     char * ufile;
-{
-  int slash_seen = 0;
-  char *p;
-  char * targ;
-
-  if (!ufile)
-    return 0;
-
-  targ = utbuf;
-
-  if (*ufile == '/')
-    {
-      ufile++;
-    }
-
-  while (*ufile)
-    {
-      switch (*ufile)
-	{
-	case '/':
-	  if (slash_seen)
-	    if (index (&ufile[1], '/'))
-	      *targ++ = '.';
-	    else
-	      *targ++ = ']';
-	  else
-	    {
-	      *targ++ = ':';
-	      if (index (&ufile[1], '/'))
-		*targ++ = '[';
-	      slash_seen = 1;
-	    }
-	  break;
-
-	case '.':
-	  if (strncmp (ufile, "./", 2) == 0)
-	    {
-	      if (!slash_seen)
-		{
-		  *targ++ = '[';
-		  slash_seen = 1;
-		}
-	      ufile++;		/* skip the dot */
-	      if (index (&ufile[1], '/'))
-		*targ++ = '.';
-	      else
-		*targ++ = ']';
-	    }
-	  else if (strncmp (ufile, "../", 3) == 0)
-	    {
-	      if (!slash_seen)
-		{
-		  *targ++ = '[';
-		  slash_seen = 1;
-		}
-	      *targ++ = '-';
-	      ufile += 2;	/* skip the dots */
-	      if (index (&ufile[1], '/'))
-		*targ++ = '.';
-	      else
-		*targ++ = ']';
-	    }
-	  else
-	    *targ++ = *ufile;
-	  break;
-
-	default:
-	  *targ++ = *ufile;
-	  break;
-	}
-      ufile++;
-    }
-  *targ = '\0';
-
-  return utbuf;
-}
-
-char *
-getwd (pathname)
-     char *pathname;
-{
-  char *ptr, *val;
-  extern char *getcwd ();
-
-#define MAXPATHLEN 1024
-
-  ptr = xmalloc (MAXPATHLEN);
-  val = getcwd (ptr, MAXPATHLEN);
-  if (val == 0)
-    {
-      xfree (ptr);
-      return val;
-    }
-  strcpy (pathname, ptr);
-  xfree (ptr);
-
- return pathname;
-}
-
-int
-getppid ()
-{
-  long item_code = JPI$_OWNER;
-  unsigned long parent_id;
-  int status;
-
-  if (((status = LIB$GETJPI (&item_code, 0, 0, &parent_id)) & 1) == 0)
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return -1;
-    }
-  return parent_id;
-}
-
-#undef getuid
-unsigned
-sys_getuid ()
-{
-  return (getgid () << 16) | getuid ();
-}
-
-#undef read
-int
-sys_read (fildes, buf, nbyte)
-     int fildes;
-     char *buf;
-     unsigned int nbyte;
-{
-  return read (fildes, buf, (nbyte < MAXIOSIZE ? nbyte : MAXIOSIZE));
-}
-
-/*
- *	VAX/VMS VAX C RTL really loses. It insists that records
- *      end with a newline (carriage return) character, and if they
- *	don't it adds one (nice of it isn't it!)
- *
- *	Thus we do this stupidity below.
- */
-
-#undef write
-int
-sys_write (fildes, buf, nbytes)
-     int fildes;
-     char *buf;
-     unsigned int nbytes;
-{
-  register char *p;
-  register char *e;
-  int sum = 0;
-  struct stat st;
-
-  fstat (fildes, &st);
-  p = buf;
-  while (nbytes > 0)
-    {
-      int len, retval;
-
-      /* Handle fixed-length files with carriage control.  */
-      if (st.st_fab_rfm == FAB$C_FIX
-	  && ((st.st_fab_rat & (FAB$M_FTN | FAB$M_CR)) != 0))
-	{
-	  len = st.st_fab_mrs;
-	  retval = write (fildes, p, min (len, nbytes));
-	  if (retval != len)
-	    return -1;
-	  retval++;	/* This skips the implied carriage control */
-	}
-      else
-	{
-	  e =  p + min (MAXIOSIZE, nbytes) - 1;
-	  while (*e != '\n' && e > p) e--;
-	  if (p == e)		/* Ok.. so here we add a newline... sigh. */
-	    e = p + min (MAXIOSIZE, nbytes) - 1;
-	  len = e + 1 - p;
-	  retval = write (fildes, p, len);
-	  if (retval != len)
-	    return -1;
-	}
-      p += retval;
-      sum += retval;
-      nbytes -= retval;
-    }
-  return sum;
-}
-
-/* Create file NEW copying its attributes from file OLD.  If
-   OLD is 0 or does not exist, create based on the value of
-   vms_stmlf_recfm. */
-
-/* Protection value the file should ultimately have.
-   Set by create_copy_attrs, and use by rename_sansversions.  */
-static unsigned short int fab_final_pro;
-
-int
-creat_copy_attrs (old, new)
-     char *old, *new;
-{
-  struct FAB fab = cc$rms_fab;
-  struct XABPRO xabpro;
-  char aclbuf[256];	/* Choice of size is arbitrary.  See below. */
-  extern int vms_stmlf_recfm;
-
-  if (old)
-    {
-      fab.fab$b_fac = FAB$M_GET;
-      fab.fab$l_fna = old;
-      fab.fab$b_fns = strlen (old);
-      fab.fab$l_xab = (char *) &xabpro;
-      xabpro = cc$rms_xabpro;
-      xabpro.xab$l_aclbuf = aclbuf;
-      xabpro.xab$w_aclsiz = sizeof aclbuf;
-      /* Call $OPEN to fill in the fab & xabpro fields. */
-      if (SYS$OPEN (&fab, 0, 0) & 1)
-	{
-	  SYS$CLOSE (&fab, 0, 0);
-	  fab.fab$l_alq = 0;	/* zero the allocation quantity */
-	  if (xabpro.xab$w_acllen > 0)
-	    {
-	      if (xabpro.xab$w_acllen > sizeof aclbuf)
-		/* If the acl buffer was too short, redo open with longer one.
-		   Wouldn't need to do this if there were some system imposed
-		   limit on the size of an ACL, but I can't find any such. */
-		{
-		  xabpro.xab$l_aclbuf = (char *) alloca (xabpro.xab$w_acllen);
-		  xabpro.xab$w_aclsiz = xabpro.xab$w_acllen;
-		  if (SYS$OPEN (&fab, 0, 0) & 1)
-		    SYS$CLOSE (&fab, 0, 0);
-		  else
-		    old = 0;
-		}
-	    }
-	  else
-	    xabpro.xab$l_aclbuf = 0;
-	}
-      else
-	old = 0;
-    }
-  fab.fab$l_fna = new;
-  fab.fab$b_fns = strlen (new);
-  if (!old)
-    {
-      fab.fab$l_xab = 0;
-      fab.fab$b_rfm = vms_stmlf_recfm ? FAB$C_STMLF : FAB$C_VAR;
-      fab.fab$b_rat = FAB$M_CR;
-    }
-
-  /* Set the file protections such that we will be able to manipulate
-     this file.  Once we are done writing and renaming it, we will set
-     the protections back.  */
-  if (old)
-    fab_final_pro = xabpro.xab$w_pro;
-  else
-    SYS$SETDFPROT (0, &fab_final_pro);
-  xabpro.xab$w_pro &= 0xff0f; /* set O:rewd for now. This is set back later. */
-
-  /* Create the new file with either default attrs or attrs copied
-     from old file. */
-  if (!(SYS$CREATE (&fab, 0, 0) & 1))
-    return -1;
-  SYS$CLOSE (&fab, 0, 0);
-  /* As this is a "replacement" for creat, return a file descriptor
-     opened for writing. */
-  return open (new, O_WRONLY);
-}
-
-#ifdef creat
-#undef creat
-#include <varargs.h>
-#ifdef __GNUC__
-#ifndef va_count
-#define va_count(X) ((X) = *(((int *) &(va_alist)) - 1))
-#endif
-#endif
-
-int
-sys_creat (va_alist)
-     va_dcl
-{
-  va_list list_incrementer;
-  char *name;
-  int mode;
-  int rfd;			/* related file descriptor */
-  int fd;			/* Our new file descriptor */
-  int count;
-  struct stat st_buf;
-  char rfm[12];
-  char rat[15];
-  char mrs[13];
-  char fsz[13];
-  extern int vms_stmlf_recfm;
-
-  va_count (count);
-  va_start (list_incrementer);
-  name = va_arg (list_incrementer, char *);
-  mode = va_arg (list_incrementer, int);
-  if (count > 2)
-    rfd = va_arg (list_incrementer, int);
-  va_end (list_incrementer);
-  if (count > 2)
-    {
-      /* Use information from the related file descriptor to set record
-	 format of the newly created file. */
-      fstat (rfd, &st_buf);
-      switch (st_buf.st_fab_rfm)
-	{
-	case FAB$C_FIX:
-	  strcpy (rfm, "rfm = fix");
-	  sprintf (mrs, "mrs = %d", st_buf.st_fab_mrs);
-	  strcpy (rat, "rat = ");
-	  if (st_buf.st_fab_rat & FAB$M_CR)
-	    strcat (rat, "cr");
-	  else if (st_buf.st_fab_rat & FAB$M_FTN)
-	    strcat (rat, "ftn");
-	  else if (st_buf.st_fab_rat & FAB$M_PRN)
-	    strcat (rat, "prn");
-	  if (st_buf.st_fab_rat & FAB$M_BLK)
-	    if (st_buf.st_fab_rat & (FAB$M_CR|FAB$M_FTN|FAB$M_PRN))
-	      strcat (rat, ", blk");
-	    else
-	      strcat (rat, "blk");
-	  return creat (name, 0, rfm, rat, mrs);
-
-	case FAB$C_VFC:
-	  strcpy (rfm, "rfm = vfc");
-	  sprintf (fsz, "fsz = %d", st_buf.st_fab_fsz);
-	  strcpy (rat, "rat = ");
-	  if (st_buf.st_fab_rat & FAB$M_CR)
-	    strcat (rat, "cr");
-	  else if (st_buf.st_fab_rat & FAB$M_FTN)
-	    strcat (rat, "ftn");
-	  else if (st_buf.st_fab_rat & FAB$M_PRN)
-	    strcat (rat, "prn");
-	  if (st_buf.st_fab_rat & FAB$M_BLK)
-	    if (st_buf.st_fab_rat & (FAB$M_CR|FAB$M_FTN|FAB$M_PRN))
-	      strcat (rat, ", blk");
-	    else
-	      strcat (rat, "blk");
-	  return creat (name, 0, rfm, rat, fsz);
-
-	case FAB$C_STM:
-	  strcpy (rfm, "rfm = stm");
-	  break;
-
-	case FAB$C_STMCR:
-	  strcpy (rfm, "rfm = stmcr");
-	  break;
-
-	case FAB$C_STMLF:
-	  strcpy (rfm, "rfm = stmlf");
-	  break;
-
-	case FAB$C_UDF:
-	  strcpy (rfm, "rfm = udf");
-	  break;
-
-	case FAB$C_VAR:
-	  strcpy (rfm, "rfm = var");
-	  break;
-	}
-      strcpy (rat, "rat = ");
-      if (st_buf.st_fab_rat & FAB$M_CR)
-	strcat (rat, "cr");
-      else if (st_buf.st_fab_rat & FAB$M_FTN)
-	strcat (rat, "ftn");
-      else if (st_buf.st_fab_rat & FAB$M_PRN)
-	strcat (rat, "prn");
-      if (st_buf.st_fab_rat & FAB$M_BLK)
-	if (st_buf.st_fab_rat & (FAB$M_CR|FAB$M_FTN|FAB$M_PRN))
-	  strcat (rat, ", blk");
-	else
-	  strcat (rat, "blk");
-    }
-  else
-    {
-      strcpy (rfm, vms_stmlf_recfm ? "rfm = stmlf" : "rfm=var");
-      strcpy (rat, "rat=cr");
-    }
-  /* Until the VAX C RTL fixes the many bugs with modes, always use
-     mode 0 to get the user's default protection. */
-  fd = creat (name, 0, rfm, rat);
-  if (fd < 0 && errno == EEXIST)
-    {
-      if (unlink (name) < 0)
-	report_file_error ("delete", build_string (name));
-      fd = creat (name, 0, rfm, rat);
-    }
-  return fd;
-}
-#endif /* creat */
-
-/* fwrite to stdout is S L O W.  Speed it up by using fputc...*/
-int
-sys_fwrite (ptr, size, num, fp)
-     register char * ptr;
-     FILE * fp;
-{
-  register int tot = num * size;
-
-  while (tot--)
-    fputc (*ptr++, fp);
-  return num;
-}
-
-/*
- * The VMS C library routine creat actually creates a new version of an
- * existing file rather than truncating the old version.  There are times
- * when this is not the desired behavior, for instance, when writing an
- * auto save file (you only want one version), or when you don't have
- * write permission in the directory containing the file (but the file
- * itself is writable).  Hence this routine, which is equivalent to
- * "close (creat (fn, 0));" on Unix if fn already exists.
- */
-int
-vms_truncate (fn)
-     char *fn;
-{
-  struct FAB xfab = cc$rms_fab;
-  struct RAB xrab = cc$rms_rab;
-  int status;
-
-  xfab.fab$l_fop = FAB$M_TEF;	/* free allocated but unused blocks on close */
-  xfab.fab$b_fac = FAB$M_TRN | FAB$M_GET; /* allow truncate and get access */
-  xfab.fab$b_shr = FAB$M_NIL;	/* allow no sharing - file must be locked */
-  xfab.fab$l_fna = fn;
-  xfab.fab$b_fns = strlen (fn);
-  xfab.fab$l_dna = ";0";	/* default to latest version of the file */
-  xfab.fab$b_dns = 2;
-  xrab.rab$l_fab = &xfab;
-
-  /* This gibberish opens the file, positions to the first record, and
-     deletes all records from there until the end of file. */
-  if ((SYS$OPEN (&xfab) & 01) == 01)
-    {
-      if ((SYS$CONNECT (&xrab) & 01) == 01 &&
-	  (SYS$FIND (&xrab) & 01) == 01 &&
-	  (SYS$TRUNCATE (&xrab) & 01) == 01)
-	status = 0;
-      else
-	status = -1;
-    }
-  else
-    status = -1;
-  SYS$CLOSE (&xfab);
-  return status;
-}
-
-/* Define this symbol to actually read SYSUAF.DAT.  This requires either
-   SYSPRV or a readable SYSUAF.DAT. */
-
-#ifdef READ_SYSUAF
-/*
- * getuaf.c
- *
- * Routine to read the VMS User Authorization File and return
- * a specific user's record.
- */
-
-static struct UAF retuaf;
-
-struct UAF *
-get_uaf_name (uname)
-     char * uname;
-{
-  register status;
-  struct FAB uaf_fab;
-  struct RAB uaf_rab;
-
-  uaf_fab = cc$rms_fab;
-  uaf_rab = cc$rms_rab;
-  /* initialize fab fields */
-  uaf_fab.fab$l_fna = "SYS$SYSTEM:SYSUAF.DAT";
-  uaf_fab.fab$b_fns = 21;
-  uaf_fab.fab$b_fac = FAB$M_GET;
-  uaf_fab.fab$b_org = FAB$C_IDX;
-  uaf_fab.fab$b_shr = FAB$M_GET|FAB$M_PUT|FAB$M_UPD|FAB$M_DEL;
-  /* initialize rab fields */
-  uaf_rab.rab$l_fab = &uaf_fab;
-  /* open the User Authorization File */
-  status = SYS$OPEN (&uaf_fab);
-  if (!(status&1))
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return 0;
-    }
-  status = SYS$CONNECT (&uaf_rab);
-  if (!(status&1))
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return 0;
-    }
-  /* read the requested record - index is in uname */
-  uaf_rab.rab$l_kbf = uname;
-  uaf_rab.rab$b_ksz = strlen (uname);
-  uaf_rab.rab$b_rac = RAB$C_KEY;
-  uaf_rab.rab$l_ubf = (char *)&retuaf;
-  uaf_rab.rab$w_usz = sizeof retuaf;
-  status = SYS$GET (&uaf_rab);
-  if (!(status&1))
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return 0;
-    }
-  /* close the User Authorization File */
-  status = SYS$DISCONNECT (&uaf_rab);
-  if (!(status&1))
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return 0;
-    }
-  status = SYS$CLOSE (&uaf_fab);
-  if (!(status&1))
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return 0;
-    }
-  return &retuaf;
-}
-
-struct UAF *
-get_uaf_uic (uic)
-     unsigned long uic;
-{
-  register status;
-  struct FAB uaf_fab;
-  struct RAB uaf_rab;
-
-  uaf_fab = cc$rms_fab;
-  uaf_rab = cc$rms_rab;
-  /* initialize fab fields */
-  uaf_fab.fab$l_fna = "SYS$SYSTEM:SYSUAF.DAT";
-  uaf_fab.fab$b_fns = 21;
-  uaf_fab.fab$b_fac = FAB$M_GET;
-  uaf_fab.fab$b_org = FAB$C_IDX;
-  uaf_fab.fab$b_shr = FAB$M_GET|FAB$M_PUT|FAB$M_UPD|FAB$M_DEL;
-  /* initialize rab fields */
-  uaf_rab.rab$l_fab = &uaf_fab;
-  /* open the User Authorization File */
-  status = SYS$OPEN (&uaf_fab);
-  if (!(status&1))
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return 0;
-    }
-  status = SYS$CONNECT (&uaf_rab);
-  if (!(status&1))
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return 0;
-    }
-  /* read the requested record - index is in uic */
-  uaf_rab.rab$b_krf = 1;	/* 1st alternate key */
-  uaf_rab.rab$l_kbf = (char *) &uic;
-  uaf_rab.rab$b_ksz = sizeof uic;
-  uaf_rab.rab$b_rac = RAB$C_KEY;
-  uaf_rab.rab$l_ubf = (char *)&retuaf;
-  uaf_rab.rab$w_usz = sizeof retuaf;
-  status = SYS$GET (&uaf_rab);
-  if (!(status&1))
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return 0;
-    }
-  /* close the User Authorization File */
-  status = SYS$DISCONNECT (&uaf_rab);
-  if (!(status&1))
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return 0;
-    }
-  status = SYS$CLOSE (&uaf_fab);
-  if (!(status&1))
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return 0;
-    }
-  return &retuaf;
-}
-
-static struct passwd retpw;
-
-struct passwd *
-cnv_uaf_pw (up)
-     struct UAF * up;
-{
-  char * ptr;
-
-  /* copy these out first because if the username is 32 chars, the next
-     section will overwrite the first byte of the UIC */
-  retpw.pw_uid = up->uaf$w_mem;
-  retpw.pw_gid = up->uaf$w_grp;
-
-  /* I suppose this is not the best style, to possibly overwrite one
-     byte beyond the end of the field, but what the heck... */
-  ptr = &up->uaf$t_username[UAF$S_USERNAME];
-  while (ptr[-1] == ' ')
-    ptr--;
-  *ptr = '\0';
-  strcpy (retpw.pw_name, up->uaf$t_username);
-
-  /* the rest of these are counted ascii strings */
-  strncpy (retpw.pw_gecos, &up->uaf$t_owner[1], up->uaf$t_owner[0]);
-  retpw.pw_gecos[up->uaf$t_owner[0]] = '\0';
-  strncpy (retpw.pw_dir, &up->uaf$t_defdev[1], up->uaf$t_defdev[0]);
-  retpw.pw_dir[up->uaf$t_defdev[0]] = '\0';
-  strncat (retpw.pw_dir, &up->uaf$t_defdir[1], up->uaf$t_defdir[0]);
-  retpw.pw_dir[up->uaf$t_defdev[0] + up->uaf$t_defdir[0]] = '\0';
-  strncpy (retpw.pw_shell, &up->uaf$t_defcli[1], up->uaf$t_defcli[0]);
-  retpw.pw_shell[up->uaf$t_defcli[0]] = '\0';
-
-  return &retpw;
-}
-#else /* not READ_SYSUAF */
-static struct passwd retpw;
-#endif /* not READ_SYSUAF */
-
-struct passwd *
-getpwnam (name)
-     char * name;
-{
-#ifdef READ_SYSUAF
-  struct UAF *up;
-#else
-  char * user;
-  char * dir;
-  unsigned char * full;
-#endif /* READ_SYSUAF */
-  char *ptr = name;
-
-  while (*ptr)
-    {
-      if ('a' <= *ptr && *ptr <= 'z')
-	*ptr -= 040;
-      ptr++;
-    }
-#ifdef READ_SYSUAF
-  if (!(up = get_uaf_name (name)))
-    return 0;
-  return cnv_uaf_pw (up);
-#else
-  if (strcmp (name, getenv ("USER")) == 0)
-    {
-      retpw.pw_uid = getuid ();
-      retpw.pw_gid = getgid ();
-      strcpy (retpw.pw_name, name);
-      if (full = egetenv ("FULLNAME"))
-	strcpy (retpw.pw_gecos, full);
-      else
-	*retpw.pw_gecos = '\0';
-      strcpy (retpw.pw_dir, egetenv ("HOME"));
-      *retpw.pw_shell = '\0';
-      return &retpw;
-    }
-  else
-    return 0;
-#endif /* not READ_SYSUAF */
-}
-
-struct passwd *
-getpwuid (uid)
-     unsigned long uid;
-{
-#ifdef READ_SYSUAF
-  struct UAF * up;
-
-  if (!(up = get_uaf_uic (uid)))
-    return 0;
-  return cnv_uaf_pw (up);
-#else
-  if (uid == sys_getuid ())
-    return getpwnam (egetenv ("USER"));
-  else
-    return 0;
-#endif /* not READ_SYSUAF */
-}
-
-/* return total address space available to the current process.  This is
-   the sum of the current p0 size, p1 size and free page table entries
-   available. */
-int
-vlimit ()
-{
-  int item_code;
-  unsigned long free_pages;
-  unsigned long frep0va;
-  unsigned long frep1va;
-  register status;
-
-  item_code = JPI$_FREPTECNT;
-  if (((status = LIB$GETJPI (&item_code, 0, 0, &free_pages)) & 1) == 0)
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return -1;
-    }
-  free_pages *= 512;
-
-  item_code = JPI$_FREP0VA;
-  if (((status = LIB$GETJPI (&item_code, 0, 0, &frep0va)) & 1) == 0)
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return -1;
-    }
-  item_code = JPI$_FREP1VA;
-  if (((status = LIB$GETJPI (&item_code, 0, 0, &frep1va)) & 1) == 0)
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return -1;
-    }
-
-  return free_pages + frep0va + (0x7fffffff - frep1va);
-}
-
-int
-define_logical_name (varname, string)
-     char *varname;
-     char *string;
-{
-  struct dsc$descriptor_s strdsc =
-    {strlen (string), DSC$K_DTYPE_T, DSC$K_CLASS_S, string};
-  struct dsc$descriptor_s envdsc =
-    {strlen (varname), DSC$K_DTYPE_T, DSC$K_CLASS_S, varname};
-  struct dsc$descriptor_s lnmdsc =
-    {7, DSC$K_DTYPE_T, DSC$K_CLASS_S, "LNM$JOB"};
-
-  return LIB$SET_LOGICAL (&envdsc, &strdsc, &lnmdsc, 0, 0);
-}
-
-int
-delete_logical_name (varname)
-     char *varname;
-{
-  struct dsc$descriptor_s envdsc =
-    {strlen (varname), DSC$K_DTYPE_T, DSC$K_CLASS_S, varname};
-  struct dsc$descriptor_s lnmdsc =
-    {7, DSC$K_DTYPE_T, DSC$K_CLASS_S, "LNM$JOB"};
-
-  return LIB$DELETE_LOGICAL (&envdsc, &lnmdsc);
-}
-
-int
-ulimit ()
-{
-  return 0;
-}
-
-int
-setpgrp ()
-{
-  return 0;
-}
-
-int
-execvp ()
-{
-  error ("execvp system call not implemented");
-  return -1;
-}
-
-int
-rename (from, to)
-     char *from, *to;
-{
-  int status;
-  struct FAB from_fab = cc$rms_fab, to_fab = cc$rms_fab;
-  struct NAM from_nam = cc$rms_nam, to_nam = cc$rms_nam;
-  char from_esn[NAM$C_MAXRSS];
-  char to_esn[NAM$C_MAXRSS];
-
-  from_fab.fab$l_fna = from;
-  from_fab.fab$b_fns = strlen (from);
-  from_fab.fab$l_nam = &from_nam;
-  from_fab.fab$l_fop = FAB$M_NAM;
-
-  from_nam.nam$l_esa = from_esn;
-  from_nam.nam$b_ess = sizeof from_esn;
-
-  to_fab.fab$l_fna = to;
-  to_fab.fab$b_fns = strlen (to);
-  to_fab.fab$l_nam = &to_nam;
-  to_fab.fab$l_fop = FAB$M_NAM;
-
-  to_nam.nam$l_esa = to_esn;
-  to_nam.nam$b_ess = sizeof to_esn;
-
-  status = SYS$RENAME (&from_fab, 0, 0, &to_fab);
-
-  if (status & 1)
-    return 0;
-  else
-    {
-      if (status == RMS$_DEV)
-	errno = EXDEV;
-      else
-	errno = EVMSERR;
-      vaxc$errno = status;
-      return -1;
-    }
-}
-
-/* This function renames a file like `rename', but it strips
-   the version number from the "to" filename, such that the "to" file is
-   will always be a new version.  It also sets the file protection once it is
-   finished.  The protection that we will use is stored in fab_final_pro,
-   and was set when we did a creat_copy_attrs to create the file that we
-   are renaming.
-
-   We could use the chmod function, but Eunichs uses 3 bits per user category
-   to describe the protection, and VMS uses 4 (write and delete are separate
-   bits).  To maintain portability, the VMS implementation of `chmod' wires
-   the W and D bits together.  */
-
-
-static struct fibdef fib;	/* We need this initialized to zero */
-char vms_file_written[NAM$C_MAXRSS];
-
-int
-rename_sans_version (from,to)
-     char *from, *to;
-{
-  short int chan;
-  int stat;
-  short int iosb[4];
-  int status;
-  struct FAB to_fab = cc$rms_fab;
-  struct NAM to_nam = cc$rms_nam;
-  struct dsc$descriptor fib_d ={sizeof (fib),0,0,(char*) &fib};
-  struct dsc$descriptor fib_attr[2]
-    = {{sizeof (fab_final_pro),ATR$C_FPRO,0,(char*) &fab_final_pro},{0,0,0,0}};
-  char to_esn[NAM$C_MAXRSS];
-
-  $DESCRIPTOR (disk,to_esn);
-
-  to_fab.fab$l_fna = to;
-  to_fab.fab$b_fns = strlen (to);
-  to_fab.fab$l_nam = &to_nam;
-  to_fab.fab$l_fop = FAB$M_NAM;
-
-  to_nam.nam$l_esa = to_esn;
-  to_nam.nam$b_ess = sizeof to_esn;
-
-  status = SYS$PARSE (&to_fab, 0, 0); /* figure out the full file name */
-
-  if (to_nam.nam$l_fnb && NAM$M_EXP_VER)
-    *(to_nam.nam$l_ver) = '\0';
-
-  stat = rename (from, to_esn);
-  if (stat < 0)
-    return stat;
-
-  strcpy (vms_file_written, to_esn);
-
-  to_fab.fab$l_fna = vms_file_written; /* this points to the versionless name */
-  to_fab.fab$b_fns = strlen (vms_file_written);
-
-  /* Now set the file protection to the correct value */
-  SYS$OPEN (&to_fab, 0, 0);	/* This fills in the nam$w_fid fields */
-
-  /* Copy these fields into the fib */
-  fib.fib$r_fid_overlay.fib$w_fid[0] = to_nam.nam$w_fid[0];
-  fib.fib$r_fid_overlay.fib$w_fid[1] = to_nam.nam$w_fid[1];
-  fib.fib$r_fid_overlay.fib$w_fid[2] = to_nam.nam$w_fid[2];
-
-  SYS$CLOSE (&to_fab, 0, 0);
-
-  stat = SYS$ASSIGN (&disk, &chan, 0, 0); /* open a channel to the disk */
-  if (!stat)
-    LIB$SIGNAL (stat);
-  stat = SYS$QIOW (0, chan, IO$_MODIFY, iosb, 0, 0, &fib_d,
-		   0, 0, 0, &fib_attr, 0);
-  if (!stat)
-    LIB$SIGNAL (stat);
-  stat = SYS$DASSGN (chan);
-  if (!stat)
-    LIB$SIGNAL (stat);
-  strcpy (vms_file_written, to_esn); /* We will write this to the terminal*/
-  return 0;
-}
-
-int
-link (file, new)
-     char * file, * new;
-{
-  register status;
-  struct FAB fab;
-  struct NAM nam;
-  unsigned short fid[3];
-  char esa[NAM$C_MAXRSS];
-
-  fab = cc$rms_fab;
-  fab.fab$l_fop = FAB$M_OFP;
-  fab.fab$l_fna = file;
-  fab.fab$b_fns = strlen (file);
-  fab.fab$l_nam = &nam;
-
-  nam = cc$rms_nam;
-  nam.nam$l_esa = esa;
-  nam.nam$b_ess = NAM$C_MAXRSS;
-
-  status = SYS$PARSE (&fab);
-  if ((status & 1) == 0)
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return -1;
-    }
-  status = SYS$SEARCH (&fab);
-  if ((status & 1) == 0)
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return -1;
-    }
-
-  fid[0] = nam.nam$w_fid[0];
-  fid[1] = nam.nam$w_fid[1];
-  fid[2] = nam.nam$w_fid[2];
-
-  fab.fab$l_fna = new;
-  fab.fab$b_fns = strlen (new);
-
-  status = SYS$PARSE (&fab);
-  if ((status & 1) == 0)
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return -1;
-    }
-
-  nam.nam$w_fid[0] = fid[0];
-  nam.nam$w_fid[1] = fid[1];
-  nam.nam$w_fid[2] = fid[2];
-
-  nam.nam$l_esa = nam.nam$l_name;
-  nam.nam$b_esl = nam.nam$b_name + nam.nam$b_type + nam.nam$b_ver;
-
-  status = SYS$ENTER (&fab);
-  if ((status & 1) == 0)
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return -1;
-    }
-
-  return 0;
-}
-
-void
-croak (badfunc)
-     char *badfunc;
-{
-  printf ("%s not yet implemented\r\n", badfunc);
-  reset_all_sys_modes ();
-  exit (1);
-}
-
-long
-random ()
-{
-  /* Arrange to return a range centered on zero.  */
-  return rand () - (1 << 30);
-}
-
-void
-srandom (seed)
-{
-  srand (seed);
-}
-#endif /* VMS */

 #ifndef BSTRING

@@ -4849,21 +2894,8 @@
      register char *b;
      register int length;
 {
-#ifdef VMS
-  short zero = 0;
-  long max_str = 65535;
-
-  while (length > max_str) {
-    (void) LIB$MOVC5 (&zero, &zero, &zero, &max_str, b);
-    length -= max_str;
-    b += max_str;
-  }
-  max_str = length;
-  (void) LIB$MOVC5 (&zero, &zero, &zero, &max_str, b);
-#else
   while (length-- > 0)
     *b++ = 0;
-#endif /* not VMS */
 }

 #endif /* no bzero */
@@ -4879,21 +2911,8 @@
      register char *b2;
      register int length;
 {
-#ifdef VMS
-  long max_str = 65535;
-
-  while (length > max_str) {
-    (void) LIB$MOVC3 (&max_str, b1, b2);
-    length -= max_str;
-    b1 += max_str;
-    b2 += max_str;
-  }
-  max_str = length;
-  (void) LIB$MOVC3 (&length, b1, b2);
-#else
   while (length-- > 0)
     *b2++ = *b1++;
-#endif /* not VMS */
 }
 #endif /* (!defined (BSTRING) && !defined (bcopy)) || defined (NEED_BCOPY) */

@@ -4905,18 +2924,11 @@
      register char *b2;
      register int length;
 {
-#ifdef VMS
-  struct dsc$descriptor_s src1 = {length, DSC$K_DTYPE_T, DSC$K_CLASS_S, b1};
-  struct dsc$descriptor_s src2 = {length, DSC$K_DTYPE_T, DSC$K_CLASS_S, b2};
-
-  return STR$COMPARE (&src1, &src2);
-#else
   while (length-- > 0)
     if (*b1++ != *b2++)
       return 1;

   return 0;
-#endif /* not VMS */
 }
 #endif /* no bcmp */
 #endif /* not BSTRING */
@@ -4930,12 +2942,8 @@

   if (0 <= code && code < NSIG)
     {
-#ifdef VMS
-      signame = sys_errlist[code];
-#else
       /* Cast to suppress warning if the table has const char *.  */
       signame = (char *) sys_siglist[code];
-#endif
     }

   return signame;
--- a/src/syssignal.h	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/syssignal.h	Thu Jul 31 05:33:56 2008 +0000
@@ -192,13 +192,11 @@

 /* Define SIGCHLD as an alias for SIGCLD.  There are many conditionals
    testing SIGCHLD.  */
-#ifndef VMS
 #ifdef SIGCLD
 #ifndef SIGCHLD
 #define SIGCHLD SIGCLD
 #endif /* SIGCHLD */
 #endif /* ! defined (SIGCLD) */
-#endif /* VMS */

 #ifndef HAVE_STRSIGNAL
 /* strsignal is in sysdep.c */
--- a/src/systime.h	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/systime.h	Thu Jul 31 05:33:56 2008 +0000
@@ -42,12 +42,6 @@
 extern time_t timezone;
 #endif

-#ifdef VMS
-#ifdef VAXC
-#include "vmstime.h"
-#endif
-#endif
-
 /* On some configurations (hpux8.0, X11R4), sys/time.h and X11/Xos.h
    disagree about the name of the guard symbol.  */
 #ifdef HPUX
--- a/src/systty.h	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/systty.h	Thu Jul 31 05:33:56 2008 +0000
@@ -40,46 +40,9 @@
 #define INCLUDED_FCNTL
 #include <fcntl.h>
 #else /* neither HAVE_TERMIO nor HAVE_TERMIOS */
-#ifndef VMS
 #ifndef DOS_NT
 #include <sgtty.h>
 #endif /* not DOS_NT */
-#else /* VMS */
-#include <descrip.h>
-static struct iosb
-{
-  short status;
-  short offset;
-  short termlen;
-  short term;
-} input_iosb;
-
-extern int waiting_for_ast;
-extern int stop_input;
-extern int input_ef;
-extern int timer_ef;
-extern int process_ef;
-extern int input_eflist;
-extern int timer_eflist;
-
-static $DESCRIPTOR (input_dsc, "TT");
-static int terminator_mask[2] = { 0, 0 };
-
-static struct sensemode {
-  short status;
-  unsigned char xmit_baud;
-  unsigned char rcv_baud;
-  unsigned char crfill;
-  unsigned char lffill;
-  unsigned char parity;
-  unsigned char unused;
-  char class;
-  char type;
-  short scr_wid;
-  unsigned long tt_char : 24, scr_len : 8;
-  unsigned long tt2_char;
-} sensemode_iosb;
-#endif /* VMS */
 #endif /* not HAVE_TERMIOS */
 #endif /* not HAVE_TERMIO */

@@ -250,9 +213,6 @@
 #ifdef HAVE_TERMIO
   struct termio main;
 #else
-#ifdef VMS
-  struct sensemode main;
-#else
 #ifdef DOS_NT
   int main;
 #else  /* not DOS_NT */
@@ -260,7 +220,6 @@
 #endif /* not DOS_NT */
 #endif
 #endif
-#endif

 /* If we have TERMIOS, we don't need to do this - they're taken care of
    by the tc*attr calls.  */
@@ -306,11 +265,6 @@
 #define EMACS_TTY_TABS_OK(p) (((p)->main.c_oflag & TABDLY) != TAB3)

 #else /* neither HAVE_TERMIO nor HAVE_TERMIOS */
-#ifdef VMS
-
-#define EMACS_TTY_TABS_OK(p) (((p)->main.tt_char & TT$M_MECHTAB) != 0)
-
-#else

 #ifdef DOS_NT
 #define EMACS_TTY_TABS_OK(p) 0
@@ -318,7 +272,6 @@
 #define EMACS_TTY_TABS_OK(p) (((p)->main.sg_flags & XTABS) != XTABS)
 #endif /* not DOS_NT */

-#endif /* not def VMS */
 #endif /* not def HAVE_TERMIO */
 #endif /* not def HAVE_TERMIOS */
--- a/src/syswait.h	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/syswait.h	Thu Jul 31 05:33:56 2008 +0000
@@ -24,8 +24,6 @@
 #ifndef EMACS_SYSWAIT_H
 #define EMACS_SYSWAIT_H

-#ifndef VMS
-
 #include <sys/types.h>

 #ifdef HAVE_SYS_WAIT_H	/* We have sys/wait.h with POSIXoid definitions. */
@@ -57,21 +55,6 @@
 #undef WRETCODE
 #define WRETCODE(status) WEXITSTATUS (status)

-#else /* VMS */
-
-#define WIFSTOPPED(w) 0
-#define WIFSIGNALED(w) 0
-#define WIFEXITED(w) ((w) != -1)
-#define WRETCODE(w) (w)
-#define WSTOPSIG(w) (w)
-#define WCOREDUMP(w) 0
-#define WTERMSIG(w) (w)
-#include <ssdef.h>
-#include <iodef.h>
-#include <clidef.h>
-#include "vmsproc.h"
-
-#endif /* VMS */

 #endif /* EMACS_SYSWAIT_H */
--- a/src/temacs.opt	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,60 +0,0 @@
-cluster=emacs,,,-
-DISPNEW.OBJ,-
-SCROLL.OBJ,-
-XDISP.OBJ,-
-WINDOW.OBJ,-
-TERM.OBJ,-
-CM.OBJ,-
-EMACS.OBJ,-
-KEYBOARD.OBJ,-
-MACROS.OBJ,-
-KEYMAP.OBJ,-
-SYSDEP.OBJ,-
-BUFFER.OBJ,-
-FILELOCK.OBJ,-
-INSDEL.OBJ,-
-MARKER.OBJ,-
-MINIBUF.OBJ,-
-FILEIO.OBJ,-
-DIRED.OBJ,-
-FILEMODE.OBJ,-
-CMDS.OBJ,-
-CASEFIDDLE.OBJ,-
-INDENT.OBJ,-
-SEARCH.OBJ,-
-REGEX.OBJ,-
-UNDO.OBJ,-
-ALLOC.OBJ,-
-DATA.OBJ,-
-DOC.OBJ,-
-EDITFNS.OBJ,-
-CALLINT.OBJ,-
-EVAL.OBJ,-
-FNS.OBJ,-
-PRINT.OBJ,-
-LREAD.OBJ,-
-ABBREV.OBJ,-
-SYNTAX.OBJ,-
-MOCKLISP.OBJ,-
-BYTECODE.OBJ,-
-PROCESS.OBJ,-
-CALLPROC.OBJ,-
-VMSFNS.OBJ,-
-VMSPROC.OBJ,-
-DOPRNT.OBJ,-
-vmsmap.obj,-
-termcap.obj,-
-tparam.obj,-
-lastfile.obj,-
-alloca.obj,-
-malloc.obj
-collect=non_saved_data,-
-stdin,-
-stdout,-
-stderr,-
-errno,-
-vaxc$errno,-
-sys_errlist,-
-sys_nerr,-
-environ
-sys$library:vaxcrtl/library
--- a/src/term.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/term.c	Thu Jul 31 05:33:56 2008 +0000
@@ -3489,12 +3489,6 @@
   Down (tty) = tgetstr ("do", address);
   if (!Down (tty))
     Down (tty) = tgetstr ("nl", address); /* Obsolete name for "do" */
-#ifdef VMS
-  /* VMS puts a carriage return before each linefeed,
-     so it is not safe to use linefeeds.  */
-  if (Down (tty) && Down (tty)[0] == '\n' && Down (tty)[1] == '\0')
-    Down (tty) = 0;
-#endif /* VMS */
   if (tgetflag ("bs"))
     Left (tty) = "\b";		  /* can't possibly be longer! */
   else				  /* (Actually, "bs" is obsolete...) */
@@ -3610,15 +3604,6 @@

   TabWidth (tty) = tgetnum ("tw");

-#ifdef VMS
-  /* These capabilities commonly use ^J.
-     I don't know why, but sending them on VMS does not work;
-     it causes following spaces to be lost, sometimes.
-     For now, the simplest fix is to avoid using these capabilities ever.  */
-  if (Down (tty) && Down (tty)[0] == '\n')
-    Down (tty) = 0;
-#endif /* VMS */
-
   if (!tty->TS_bell)
     tty->TS_bell = "\07";

@@ -3734,13 +3719,6 @@
     {
       maybe_fatal (must_succeed, NULL, terminal,
                    "Terminal type \"%s\" is not powerful enough to run Emacs",
-#ifdef VMS
-                   "Terminal type \"%s\" is not powerful enough to run Emacs.\n\
-It lacks the ability to position the cursor.\n\
-If that is not the actual type of terminal you have, use either the\n\
-DCL command `SET TERMINAL/DEVICE= ...' for DEC-compatible terminals,\n\
-or `define EMACS_TERM \"terminal type\"' for non-DEC terminals.",
-#else /* not VMS */
 # ifdef TERMINFO
                    "Terminal type \"%s\" is not powerful enough to run Emacs.\n\
 It lacks the ability to position the cursor.\n\
@@ -3756,7 +3734,6 @@
 `setenv TERM ...') to specify the correct type.  It may be necessary\n\
 to do `unset TERMCAP' (C-shell: `unsetenv TERMCAP') as well.",
 # endif /* TERMINFO */
-#endif /*VMS */
                    terminal_type);
     }
--- a/src/termcap.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/termcap.c	Thu Jul 31 05:33:56 2008 +0000
@@ -349,13 +349,8 @@

 static int speeds[] =
   {
-#ifdef VMS
-    0, 50, 75, 110, 134, 150, -3, -6, -12, -18,
-    -20, -24, -36, -48, -72, -96, -192
-#else /* not VMS */
     0, 50, 75, 110, 135, 150, -2, -3, -6, -12,
     -18, -24, -48, -96, -192, -288, -384, -576, -1152
-#endif /* not VMS */
   };

 #endif /* not emacs */
@@ -441,34 +436,6 @@
 static int compare_contin ();
 static int name_match ();

-#ifdef VMS
-
-#include <rmsdef.h>
-#include <fab.h>
-#include <nam.h>
-#include <starlet.h>
-
-static int
-valid_filename_p (fn)
-     char *fn;
-{
-  struct FAB fab = cc$rms_fab;
-  struct NAM nam = cc$rms_nam;
-  char esa[NAM$C_MAXRSS];
-
-  fab.fab$l_fna = fn;
-  fab.fab$b_fns = strlen(fn);
-  fab.fab$l_nam = &nam;
-  fab.fab$l_fop = FAB$M_NAM;
-
-  nam.nam$l_esa = esa;
-  nam.nam$b_ess = sizeof esa;
-
-  return SYS$PARSE(&fab, 0, 0) == RMS$_NORMAL;
-}
-
-#else /* !VMS */
-
 #ifdef MSDOS /* MW, May 1993 */
 static int
 valid_filename_p (fn)
@@ -480,8 +447,6 @@
 #define valid_filename_p(fn) (*(fn) == '/')
 #endif

-#endif /* !VMS */
-
 /* Find the termcap entry data for terminal type NAME
    and store it in the block that BP points to.
    Record its address for future use.
--- a/src/uaf.h	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,298 +0,0 @@
-/* GNU Emacs VMS UAF definition file.
-   Copyright (C) 1986, 2001, 2002, 2003, 2004, 2005,
-                 2006, 2007, 2008  Free Software Foundation, Inc.
-
-This file is part of GNU Emacs.
-
-GNU Emacs is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-
-GNU Emacs is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.  */
-
-/*
- * User Authorization File record formats
- */
-#ifndef UAF$K_LENGTH
-
-struct UAF {
-#define	UAF$C_USER_ID	1
-#define	UAF$C_VERSION1	1
-#define	UAF$C_KEYED_PART	52
-#define	UAF$C_AD_II	0
-#define	UAF$C_PURDY	1
-#define	UAF$C_PURDY_V	2
-#define	UAF$K_FIXED	644
-#define	UAF$C_FIXED	644
-#define	UAF$K_LENGTH	1412
-#define	UAF$C_LENGTH	1412
-#define	UAF$S_UAFDEF	1412
-#define	UAF$B_RTYPE	0
-  char uaf$b_rtype;
-#define	UAF$B_VERSION	1
-  char uaf$b_version;
-#define	UAF$W_USRDATOFF	2
-  short	uaf$w_usrdatoff;
-#define	UAF$S_USERNAME	32
-#define	UAF$T_USERNAME	4
-#define	UAF$T_USERNAME_TAG	35
-  char uaf$t_username[UAF$S_USERNAME];
-#define	UAF$L_UIC	36
-#define	UAF$W_MEM	36
-#define	UAF$W_GRP	38
-  union {
-    long uaf_l_uic;
-#define	uaf$l_uic	uaf_u_uic.uaf_l_uic
-    struct {
-      short uaf_w_mem;
-      short uaf_w_grp;
-#define	uaf$w_mem	uaf_u_uic.uaf_u_mem_grp.uaf_w_mem
-#define	uaf$w_grp	uaf_u_uic.uaf_u_mem_grp.uaf_w_grp
-    } uaf_u_mem_grp;
-  } uaf_u_uic;
-#define	UAF$L_SUB_ID	40
-  long	uaf$l_sub_id;
-#define	UAF$S_PARENT_ID	8
-#define	UAF$Q_PARENT_ID	44
-  char	uaf$q_parent_id[UAF$S_PARENT_ID];
-#define	UAF$S_ACCOUNT	32
-#define	UAF$T_ACCOUNT	52
-  char	uaf$t_account[UAF$S_ACCOUNT];
-#define	UAF$S_OWNER	32
-#define	UAF$T_OWNER	84
-  char	uaf$t_owner[UAF$S_OWNER];
-#define	UAF$S_DEFDEV	32
-#define	UAF$T_DEFDEV	116
-  char	uaf$t_defdev[UAF$S_DEFDEV];
-#define	UAF$S_DEFDIR	64
-#define	UAF$T_DEFDIR	148
-  char	uaf$t_defdir[UAF$S_DEFDIR];
-#define	UAF$S_LGICMD	64
-#define	UAF$T_LGICMD	212
-  char	uaf$t_lgicmd[UAF$S_LGICMD];
-#define	UAF$S_DEFCLI	32
-#define	UAF$T_DEFCLI	276
-  char	uaf$t_defcli[UAF$S_DEFCLI];
-#define	UAF$S_CLITABLES	32
-#define	UAF$T_CLITABLES	308
-  char	uaf$t_clitables[UAF$S_CLITABLES];
-#define	UAF$S_PWD	8
-#define	UAF$Q_PWD	340
-#define	UAF$L_PWD	340
-  char	uaf$q_pwd[UAF$S_PWD];
-#define uaf$l_pwd	uaf$q_pwd[0]
-#define	UAF$S_PWD2	8
-#define	UAF$Q_PWD2	348
-  char	uaf$q_pwd2[UAF$S_PWD2];
-#define	UAF$W_LOGFAILS	356
-  short	uaf$w_logfails;
-#define	UAF$W_SALT	358
-  short	uaf$w_salt;
-#define	UAF$B_ENCRYPT	360
-  char	uaf$b_encrypt;
-#define	UAF$B_ENCRYPT2	361
-  char	uaf$b_encrypt2;
-#define	UAF$B_PWD_LENGTH	362
-  char	uaf$b_pwd_length;
-#define	UAF$S_EXPIRATION	8
-#define	UAF$Q_EXPIRATION	364
-  char	uaf$q_expiration[UAF$S_EXPIRATION];
-#define	UAF$S_PWD_LIFETIME	8
-#define	UAF$Q_PWD_LIFETIME	372
-  char	uaf$q_pwd_lifetime[UAF$S_PWD_LIFETIME];
-#define	UAF$S_PWD_DATE	8
-#define	UAF$Q_PWD_DATE	380
-  char	uaf$q_pwd_date[UAF$S_PWD_DATE];
-#define	UAF$S_PWD2_DATE	8
-#define	UAF$Q_PWD2_DATE	388
-  char	uaf$q_pwd2_date[UAF$S_PWD2_DATE];
-#define	UAF$S_LASTLOGIN_I	8
-#define	UAF$Q_LASTLOGIN_I	396
-  char	uaf$q_lastlogin_i[UAF$S_LASTLOGIN_I];
-#define	UAF$S_LASTLOGIN_N	8
-#define	UAF$Q_LASTLOGIN_N	404
-  char	uaf$q_lastlogin_n[UAF$S_LASTLOGIN_N];
-#define	UAF$S_PRIV	8
-#define	UAF$Q_PRIV	412
-  char	uaf$q_priv[UAF$S_PRIV];
-#define	UAF$S_DEF_PRIV	8
-#define	UAF$Q_DEF_PRIV	420
-  char	uaf$q_def_priv[UAF$S_DEF_PRIV];
-#define	UAF$S_MIN_CLASS	20
-#define	UAF$R_MIN_CLASS	428
-  char	uaf$r_min_class[UAF$S_MIN_CLASS];
-#define	UAF$S_MAX_CLASS	20
-#define	UAF$R_MAX_CLASS	448
-  char	uaf$r_max_class[UAF$S_MAX_CLASS];
-#define	UAF$L_FLAGS	468
-#define	UAF$V_DISCTLY	0
-#define	UAF$V_DEFCLI	1
-#define	UAF$V_LOCKPWD	2
-#define	UAF$V_CAPTIVE	3
-#define	UAF$V_DISACNT	4
-#define	UAF$V_DISWELCOM	5
-#define	UAF$V_DISMAIL	6
-#define	UAF$V_NOMAIL	7
-#define	UAF$V_GENPWD	8
-#define	UAF$V_PWD_EXPIRED	9
-#define	UAF$V_PWD2_EXPIRED	10
-#define	UAF$V_AUDIT	11
-#define	UAF$V_DISREPORT	12
-#define	UAF$V_DISRECONNECT	13
-  union {
-    unsigned long	uaf_l_flags;
-#define uaf$l_flags uaf_u_flags.uaf_l_flags
-    struct {
-      unsigned long
-	uaf_v_disctly : 1,
-#define uaf$v_disctly uaf_u_flags.uaf_v_flags.uaf_v_disctly
-      uaf_v_defcli : 1,
-#define uaf$v_defcli uaf_u_flags.uaf_v_flags.uaf_v_discli
-      uaf_v_lockpwd : 1,
-#define uaf$v_lockpwd uaf_u_flags.uaf_v_flags.uaf_v_lockpwd
-      uaf_v_captive : 1,
-#define uaf$v_captive uaf_u_flags.uaf_v_flags.uaf_v_captive
-      uaf_v_disacnt : 1,
-#define uaf$v_disacnt uaf_u_flags.uaf_v_flags.uaf_v_disacnt
-      uaf_v_diswelcom : 1,
-#define uaf$v_diswelcom uaf_u_flags.uaf_v_flags.uaf_v_diswelcom
-      uaf_v_dismail : 1,
-#define uaf$v_dismail uaf_u_flags.uaf_v_flags.uaf_v_dismail
-      uaf_v_nomail : 1,
-#define uaf$v_nomail uaf_u_flags.uaf_v_flags.uaf_v_nomail
-      uaf_v_genpwd : 1,
-#define uaf$v_genpwd uaf_u_flags.uaf_v_flags.uaf_v_genpwd
-      uaf_v_pwd_expired : 1,
-#define uaf$v_pwd_expired uaf_u_flags.uaf_v_flags.uaf_v_pwd_expired
-      uaf_v_pwd2_expired : 1,
-#define uaf$v_pwd2_expired uaf_u_flags.uaf_v_flags.uaf_v_pwd2_expired
-      uaf_v_audit : 1,
-#define uaf$v_audit uaf_u_flags.uaf_v_flags.uaf_v_audit
-      uaf_v_disreport : 1,
-#define uaf$v_disreport uaf_u_flags.uaf_v_flags.uaf_v_disreport
-      uaf_v_disreconnect : 1;
-#define uaf$v_disreconnect uaf_u_flags.uaf_v_flags.uaf_v_disreconnect
-    } uaf_v_flags;
-  } uaf_u_flags;
-#define	UAF$S_NETWORK_ACCESS_P	3
-#define	UAF$B_NETWORK_ACCESS_P	472
-  char	uaf$b_network_access_p[UAF$S_NETWORK_ACCESS_P];
-#define	UAF$S_NETWORK_ACCESS_S	3
-#define	UAF$B_NETWORK_ACCESS_S	475
-  char	uaf$b_network_access_s[UAF$S_NETWORK_ACCESS_S];
-#define	UAF$S_BATCH_ACCESS_P	3
-#define	UAF$B_BATCH_ACCESS_P	478
-  char	uaf$b_batch_access_p[UAF$S_BATCH_ACCESS_P];
-#define	UAF$S_BATCH_ACCESS_S	3
-#define	UAF$B_BATCH_ACCESS_S	481
-  char	uaf$b_batch_access_s[UAF$S_BATCH_ACCESS_S];
-#define	UAF$S_LOCAL_ACCESS_P	3
-#define	UAF$B_LOCAL_ACCESS_P	484
-  char	uaf$b_local_access_p[UAF$S_LOCAL_ACCESS_P];
-#define	UAF$S_LOCAL_ACCESS_S	3
-#define	UAF$B_LOCAL_ACCESS_S	487
-  char	uaf$b_local_access_s[UAF$S_LOCAL_ACCESS_S];
-#define	UAF$S_DIALUP_ACCESS_P	3
-#define	UAF$B_DIALUP_ACCESS_P	490
-  char	uaf$b_dialup_access_p[UAF$S_DIALUP_ACCESS_P];
-#define	UAF$S_DIALUP_ACCESS_S	3
-#define	UAF$B_DIALUP_ACCESS_S	493
-  char	uaf$b_dialup_access_s[UAF$S_DIALUP_ACCESS_S];
-#define	UAF$S_REMOTE_ACCESS_P	3
-#define	UAF$B_REMOTE_ACCESS_P	496
-  char	uaf$b_remote_access_p[UAF$S_REMOTE_ACCESS_P];
-#define	UAF$S_REMOTE_ACCESS_S	3
-#define	UAF$B_REMOTE_ACCESS_S	499
-  char	uaf$b_remote_access_s[UAF$S_REMOTE_ACCESS_S];
-#define	UAF$B_PRIMEDAYS	514
-#define	UAF$V_MONDAY	0
-#define	UAF$V_TUESDAY	1
-#define	UAF$V_WEDNESDAY	2
-#define	UAF$V_THURSDAY	3
-#define	UAF$V_FRIDAY	4
-#define	UAF$V_SATURDAY	5
-#define	UAF$V_SUNDAY	6
-  union {
-    unsigned char	uaf_b_primedays;
-#define uaf$b_primedays uaf_u_primedays.uaf_b_primedays
-    unsigned char
-      uaf_v_monday : 1,
-#define uaf$v_monday uaf_u_primedays.uaf_v_monday
-    uaf_v_tuesday : 1,
-#define uaf$v_tuesday uaf_u_primedays.uaf_v_tuesday
-    uaf_v_wednesday : 1,
-#define uaf$v_wednesday uaf_u_primedays.uaf_v_wednesday
-    uaf_v_thursday : 1,
-#define uaf$v_thursday uaf_u_primedays.uaf_v_thursday
-    uaf_v_friday : 1,
-#define uaf$v_friday uaf_u_primedays.uaf_v_friday
-    uaf_v_saturday : 1,
-#define uaf$v_saturday uaf_u_primedays.uaf_v_saturday
-    uav_v_sunday : 1;
-#define uaf$v_sunday uaf_u_primedays.uaf_v_sunday
-  } uaf_u_primedays;
-#define	UAF$B_PRI	516
-  char	uaf$b_pri;
-#define	UAF$B_QUEPRI	517
-  char	uaf$b_quepri;
-#define	UAF$W_MAXJOBS	518
-  short	uaf$w_maxjobs;
-#define	UAF$W_MAXACCTJOBS	520
-  short	uaf$w_maxacctjobs;
-#define	UAF$W_MAXDETACH	522
-  short	uaf$w_maxdetach;
-#define	UAF$W_PRCCNT	524
-  short	uaf$w_prccnt;
-#define	UAF$W_BIOLM	526
-  short	uaf$w_biolm;
-#define	UAF$W_DIOLM	528
-  short	uaf$w_diolm;
-#define	UAF$W_TQCNT	530
-  short	uaf$w_twcnt;
-#define	UAF$W_ASTLM	532
-  short	uaf$w_astlm;
-#define	UAF$W_ENQLM	534
-  short	uaf$w_enqlm;
-#define	UAF$W_FILLM	536
-  short	uaf$w_fillm;
-#define	UAF$W_SHRFILLM	538
-  short	uaf$w_shrfillm;
-#define	UAF$L_WSQUOTA	540
-  long	uaf$l_wsquota;
-#define	UAF$L_DFWSCNT	544
-  long	uaf$l_dfwscnt;
-#define	UAF$L_WSEXTENT	548
-  long	uaf$l_wsextent;
-#define	UAF$L_PGFLQUOTA	552
-  long	uaf$l_pgflquota;
-#define	UAF$L_CPUTIM	556
-  long	uaf$l_cputim;
-#define	UAF$L_BYTLM	560
-  long	uaf$l_bytlm;
-#define	UAF$L_PBYTLM	564
-  long	uaf$l_pbytlm;
-#define	UAF$L_JTQUOTA	568
-  long	uaf$l_jtquota;
-#define	UAF$W_PROXY_LIM	572
-  short	uaf$w_proxy_lim;
-#define	UAF$W_PROXIES	574
-  short	uaf$w_proxies;
-#define	UAF$W_ACCOUNT_LIM	576
-  short	uaf$w_account_lim;
-#define	UAF$W_ACCOUNTS	578
-  short	uaf$w_accounts;
-  char	uaf$b_fixed[UAF$C_FIXED - UAF$W_ACCOUNTS + 2];
-  char	uaf$b_usrdata[UAF$C_LENGTH - UAF$C_FIXED];
-};
-
-#endif /* not UAF$K_LENGTH */
-
-/* arch-tag: f95d73be-b0bf-46b7-adf7-89ce8846b062
-   (do not change this comment) */
--- a/src/vlimit.h	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,5 +0,0 @@
-/* Dummy for Emacs so that we can run on VMS... */
-#define LIM_DATA 0
-
-/* arch-tag: 0c3436cb-5edc-447a-87af-acec402a65b9
-   (do not change this comment) */
--- a/src/xfns.c	Thu Jul 31 02:47:32 2008 +0000
+++ b/src/xfns.c	Thu Jul 31 05:33:56 2008 +0000
@@ -56,15 +56,11 @@
 #include <sys/types.h>
 #include <sys/stat.h>

-#ifndef VMS
 #if 1 /* Used to be #ifdef EMACS_BITMAP_FILES, but this should always work.  */
 #include "bitmaps/gray.xbm"
 #else
 #include <X11/bitmaps/gray>
 #endif
-#else
-#include "[.bitmaps]gray.xbm"
-#endif

 #ifdef USE_GTK
 #include "gtkutil.h"
--- a/vms/README	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,12 +0,0 @@
-GNU Emacs 19.x and above do not compile out of the box on OpenVMS.
-Richard Levitte <levitte@lp.se> is distributing and maintaining a
-version of Emacs (currently based on version 19.28, but soon moving to
-19.34 and then 20.1) that compiles and works on OpenVMS 5.5 and above
-on both VAX and Alpha architectures.  For more information see
-
-  http://vms.gnu.org/software/released1/emacs.html#get_emacs_1928_kit
-
-
-[Update 2003-11-24: I am working on integrating VMS-specific bits
- back into the repository.  There are some work-in-progress files
- in this directory as a result.  Do not be alarmed!  --ttn]
--- a/vms/make-mms-derivative.el	Thu Jul 31 02:47:32 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,139 +0,0 @@
-;;; make-mms-derivative.el --- framework to do horrible things for VMS support
-
-;; Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008
-;;   Free Software Foundation, Inc.
-
-;; Author: Thien-Thi Nguyen <ttn@gnu.org>
-;; Keywords: maint build vms mms makefile levitte autoconf war-is-a-lose
-
-;; This file is part of GNU Emacs.
-
-;; GNU Emacs is free software: you can redistribute it and/or modify
-;; it under the terms of the GNU General Public License as published by
-;; the Free Software Foundation, either version 3 of the License, or
-;; (at your option) any later version.
-
-;; GNU Emacs is distributed in the hope that it will be useful,
-;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;; GNU General Public License for more details.
-
-;; You should have received a copy of the GNU General Public License
-;; along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
-
-;;; Commentary:
-
-;; Under VMS the standard make-like program is called MMS, which looks
-;; for an input file in the default directory named DESCRIP.MMS and runs
-;; the DCL command rules therein.  As of 2005, the build process
-;; requires a hand translation of the Makefile.in and Emacs-specific
-;; methodology to DCL and TPU commands, so to alleviate this pain, we
-;; provide `make-mms-derivative', which given a source FILENAME, inserts
-;; the file contents in a new buffer and loads FILENAME-2mms.  The lisp
-;; code in the -2mms file can (do whatever -- it's emacs -- and), as
-;; long as it arranges to write out the modified buffer after loading by
-;; specifying, on a line of its own, the directive:
-;;
-;;  :output RELATIVE-OUTPUT
-;;
-;; where RELATIVE-OUTPUT is a filename (a string) relative to FILENAME's
-;; directory, typically something simple like "descrip.mms_in_in".  Only
-;; the first :output directive is recognized.
-;;
-;; The only other special directive at this time has the form:
-;;
-;;  :gigo NAME
-;;  ;;blah blah blah
-;;  ;;(more text here)
-;;
-;; NAME is anything distinguishable w/ `eq' (number, symbol or keyword).
-;; This associates NAME with the block of text starting immediately below
-;; the :gigo directive and ending at the first line that does not begin
-;; with two semicolons (which are stripped from each line in the block).
-;; To insert this block of text, pass NAME to `make-mms-derivative-gigo'.
-;;
-;; Directives are scanned before normal evaluation, so their placement
-;; in the file is not important.  During loading, plain strings are
-;; displayed in the echo area, prefixed with the current line number.
-;;
-;; Over the long run, the convenience functions provided (see source)
-;; will be augmented by factoring maximally the -2mms files, squeezing
-;; as much algorithm out of those nasty heuristics as possible.  What
-;; makes them nasty is not that they rely on the conventions of the
-;; Emacs makefiles; that's no big deal.  What makes them nasty is that
-;; they rely on the conventions of separately maintained tools (namely
-;; Autoconf for VMS and GNU Autoconf), and the separation of conventions
-;; is how people drift apart, dragging their software behind
-;; mercilessly.
-;;
-;; In general, codified thought w/o self-synchronization is doomed.
-;; That a generation would eat its young (most discriminatingly, even)
-;; is no reason GNU cannot build around such woe.
-
-;;; Code:
-
-(defvar make-mms-derivative-data nil
-  "Plist of data specific to `make-mms-derivative'.")
-
-(defun make-mms-derivative-data (key &optional newval)
-  (if newval (setq make-mms-derivative-data
-		   (plist-put make-mms-derivative-data key newval))
-    (plist-get make-mms-derivative-data key)))
-
-(defun make-mms-derivative-gigo (name)
-  "Insert the text associated with :gigo NAME."
-  (insert (cdr (assq name (make-mms-derivative-data :gigo)))))
-
-(defun make-mms-derivative (filename)
-  "Take FILENAME contents, load FILENAME-2mms, and write out the result.
-The output file is specified by the :output directive in FILENAME-2mms.
-See commentary of make-mms-derivative.el for full documentation."
-  (interactive "fSource File: ")
-  (let* ((todo (let ((fn (concat filename "-2mms")))
-		 (unless (file-exists-p fn)
-		   (error "Could not find %s" fn))
-		 (set-buffer (get-buffer-create " *make-mms-derivative todo*"))
-		 (insert-file-contents fn)
-		 (current-buffer)))
-	 (deriv (get-buffer-create (format "*mms-derivative: %s"
-					   (file-relative-name filename))))
-	 output gigo form)
-    (set-buffer todo)
-    (re-search-forward "^:output")
-    (setq output (expand-file-name (read (current-buffer))
-				   (file-name-directory filename)))
-    (goto-char (point-min))
-    (while (re-search-forward "^:gigo" (point-max) t)
-      (let ((name (read (current-buffer)))
-	    (p (progn (forward-line 1) (point))))
-	(while (looking-at ";;")
-	  (delete-char 2)
-	  (forward-line 1))
-	(setq gigo (cons (cons name (buffer-substring p (point))) gigo))
-	(delete-region p (point))))
-    (message "Munging...")
-    (switch-to-buffer deriv)
-    (erase-buffer)
-    (insert-file-contents filename)
-    (set (make-local-variable 'make-mms-derivative-data)
-	 (list :gigo gigo))
-    (set-buffer todo)
-    (goto-char (point-min))
-    (while (condition-case nil
-	       (setq form (read (current-buffer)))
-	     (end-of-file nil))
-      (if (stringp form)
-	  (message "%d: %s" (count-lines (point-min) (point)) form)
-	(save-excursion
-	  (set-buffer deriv)
-	  (eval form))))
-    (set-buffer deriv)
-    (message "Munging...done")
-    (write-file output)
-    (kill-buffer todo)
-    (kill-buffer deriv)))
-
-(provide 'make-mms-derivative)
-
-;; arch-tag: a5b08625-3952-4053-be16-296220e27bb0
-;;; make-mms-derivative.el ends here