changeset 71207:c550ef173e58

Lots of cleanups.
author Richard M. Stallman <rms@gnu.org>
date Sun, 04 Jun 2006 02:17:43 +0000
parents 07072bab2769
children 3d3ffeac18d4
files man/mini.texi
diffstat 1 files changed, 275 insertions(+), 307 deletions(-) [+]
line wrap: on
line diff
--- a/man/mini.texi	Sun Jun 04 01:14:15 2006 +0000
+++ b/man/mini.texi	Sun Jun 04 02:17:43 2006 +0000
@@ -6,55 +6,53 @@
 @chapter The Minibuffer
 @cindex minibuffer
 
-  The @dfn{minibuffer} is the facility used by Emacs commands to read
-arguments more complicated than a single number.  Minibuffer arguments
-can be file names, buffer names, Lisp function names, Emacs command
-names, Lisp expressions, and many other things, depending on the command
-reading the argument.  You can use the usual Emacs editing commands in
-the minibuffer to edit the argument text.
+  The @dfn{minibuffer} is where Emacs commands read complicated
+arguments (anything more a single number).  We call it the
+``minibuffer'' because it's a special-purpose buffer with a small
+amount of screen space.  Minibuffer arguments can be file names,
+buffer names, Lisp function names, Emacs command names, Lisp
+expressions, and many other things---whatever the command wants to
+read.  You can use the usual Emacs editing commands in the minibuffer
+to edit the argument text.
 
 @cindex prompt
-  When the minibuffer is in use, it appears in the echo area, and the
-terminal's cursor moves there.  The beginning of the minibuffer line
-displays a @dfn{prompt} in a special color, to say what kind of input
-you should supply and how it will be used.  Often this prompt is
-derived from the name of the command that the argument is for.  The
-prompt normally ends with a colon.
+  When the minibuffer is in use, it appears in the echo area, with a
+cursor.  The minibuffer display starts with a @dfn{prompt} in a
+distinct color; it says what kind of input is expected and how it will
+be used.  Often the prompt is derived from the name of the command
+that is reading the argument.  The prompt normally ends with a colon.
 
 @cindex default argument
-  Sometimes a @dfn{default argument} appears in parentheses before the
-colon; it too is part of the prompt.  The default will be used as the
-argument value if you enter an empty argument (that is, just type
-@key{RET}).  For example, commands that read buffer names always show a
-default, which is the name of the buffer that will be used if you type
-just @key{RET}.
+  Sometimes a @dfn{default argument} appears in the prompt, inside
+parentheses before the colon.  The default will be used as the
+argument value if you just type @key{RET}.  For example, commands that
+read buffer names show a buffer name as the default.  You can type
+@key{RET} to operate on that default buffer.
 
-  The simplest way to enter a minibuffer argument is to type the text
-you want, terminated by @key{RET} which exits the minibuffer.  You can
-cancel the command that wants the argument, and get out of the
-minibuffer, by typing @kbd{C-g}.
+  The simplest way to enter a minibuffer argument is to type the text,
+then @key{RET} to exit the minibuffer.  You can cancel the minibuffer,
+and the command that wants the argument, by typing @kbd{C-g}.
 
-  Since the minibuffer uses the screen space of the echo area, it can
-conflict with other ways Emacs customarily uses the echo area.  Here is how
-Emacs handles such conflicts:
+  Since the minibuffer appears in the echo area, it can conflict with
+other uses of the echo area.  Here is how Emacs handles such
+conflicts:
 
 @itemize @bullet
 @item
-If a command gets an error while you are in the minibuffer, this does
-not cancel the minibuffer.  However, the echo area is needed for the
-error message and therefore the minibuffer itself is hidden for a
-while.  It comes back after a few seconds, or as soon as you type
-anything.
+An error occurs while the minibuffer is active.
+  
+The error message hides the minibuffer for a few seconds, or until you
+type something.  Then the minibuffer comes back.
 
 @item
-If in the minibuffer you use a command whose purpose is to display a
-message in the echo area, such as @kbd{C-x =}, the message hides the
-minibuffer for a while.  The minibuffer contents come back after a few
-seconds, or as soon as you type anything.
+A command such as @kbd{C-x =} needs to display a message in the echo
+area.
+
+The message hides the minibuffer for a few seconds, or until you type
+something.  Then the minibuffer comes back.
 
 @item
-Echoing of keystrokes does not take place while the minibuffer is in
-use.
+Keystrokes don't echo while the minibuffer is in use.
 @end itemize
 
 @menu
@@ -68,34 +66,32 @@
 @node Minibuffer File
 @section Minibuffers for File Names
 
-  Sometimes the minibuffer starts out with text in it.  For example, when
-you are supposed to give a file name, the minibuffer starts out containing
-the @dfn{default directory}, which ends with a slash.  This is to inform
-you which directory the file will be found in if you do not specify a
-directory.
+  When you use the minibuffer to enter a file name, it starts out with
+some initial text---the @dfn{default directory}, ending in a slash.
+The file you specify will be in this directory unless you alter or
+replace it.
 
 @c Separate paragraph to clean up ugly page break--rms
 @need 1500
-  For example, the minibuffer might start out with these contents:
+  For example, if the minibuffer starts out with these contents:
 
 @example
 Find File: /u2/emacs/src/
 @end example
 
 @noindent
-where @samp{Find File:@: } is the prompt.  Typing @kbd{buffer.c} as
-input specifies the file @file{/u2/emacs/src/buffer.c}.  To find files
-in nearby directories, use @kbd{..}; thus, if you type
-@kbd{../lisp/simple.el}, you will get the file named
-@file{/u2/emacs/lisp/simple.el}.  Alternatively, you can kill with
-@kbd{M-@key{DEL}} the directory names you don't want (@pxref{Words}).
+(where @samp{Find File:@: } is the prompt), and you type
+@kbd{buffer.c} as input, that specifies the file
+@file{/u2/emacs/src/buffer.c}.  You can specify the parent directory
+by adding @file{..}; thus, if you type @kbd{../lisp/simple.el}, you
+will get @file{/u2/emacs/lisp/simple.el}.  Alternatively, you can use
+@kbd{M-@key{DEL}} to kill the directory names you don't want
+(@pxref{Words}).
 
-  If you don't want any of the default, you can kill it with @kbd{C-a
-C-k}.  But you don't need to kill the default; you can simply ignore it.
-Insert an absolute file name, one starting with a slash or a tilde,
-after the default directory.  For example, to specify the file
-@file{/etc/termcap}, just insert that name, giving these minibuffer
-contents:
+  You can kill it the entire default with @kbd{C-a C-k}, but there's
+no need.  You can simply ignore it and give an absolute file name
+starting with a slash or a tilde after the default directory.  For
+example, to specify @file{/etc/termcap}, just type that name:
 
 @example
 Find File: /u2/emacs/src//etc/termcap
@@ -106,59 +102,55 @@
 @cindex double slash in file name
 @cindex slashes repeated in file name
 @findex file-name-shadow-mode
-GNU Emacs gives a special meaning to a double slash (which is not
-normally a useful thing to write): it means, ``ignore everything
-before the second slash in the pair.''  Thus, @samp{/u2/emacs/src/} is
-ignored in the example above, and you get the file
-@file{/etc/termcap}.  The ignored part of the file name is dimmed if
-the terminal allows it; to disable this, turn off
-@code{file-name-shadow-mode} minor mode.
+GNU Emacs interprets a double slash (which is not normally useful in
+file names) as, ``ignore everything before the second slash in the
+pair.''  In the example above. @samp{/u2/emacs/src/} is ignored, so
+you get @file{/etc/termcap}.  The ignored part of the file name is
+dimmed if the terminal allows it; to disable this dimming, turn off
+File Name Shadow mode (a minor mode) with the command
+@kbd{M-x file-name-shadow-mode}.
 
-  If you set @code{insert-default-directory} to @code{nil}, the
+  If the variable @code{insert-default-directory} is @code{nil}, the
 default directory is never inserted in the minibuffer---so the
-minibuffer starts out empty.  But the name you type, if relative, is
-still interpreted with respect to the same default directory.
+minibuffer starts out empty.  Nonetheless, relative file name
+arguments are still interpreted based on the same default directory.
 
 @node Minibuffer Edit
 @section Editing in the Minibuffer
 
-  The minibuffer is an Emacs buffer (albeit a peculiar one), and the usual
-Emacs commands are available for editing the text of an argument you are
-entering.
+  The minibuffer is an Emacs buffer (albeit a peculiar one), and the
+usual Emacs commands are available for editing the argument text.
 
   Since @key{RET} in the minibuffer is defined to exit the minibuffer,
 you can't use it to insert a newline in the minibuffer.  To do that,
 type @kbd{C-o} or @kbd{C-q C-j}.  (The newline character is really the
 @acronym{ASCII} character control-J.)
 
-  The minibuffer has its own window, which normally has space on the
-Emacs frame at all times, but it only acts like an Emacs window when
-the minibuffer is really in use.  At those times, its window is much
-like any other Emacs window; you can switch from the minibuffer window
-to another window with @kbd{C-x o}, and edit text in other windows,
-before returning to the minibuffer to submit the argument.  You can
-kill text in another window, return to the minibuffer window, and then
-yank the text to use it in the argument.  @xref{Windows}.
+  The minibuffer has its own window, which normally has space in the
+frame at all times, but it only acts like an Emacs window when the
+minibuffer is active.  When active, this window is much like any other
+Emacs window; for instance, you can switch to another window (with
+@kbd{C-x o}), edit text there, then return to the minibuffer window to
+finish the argument.  You can even kill text in another window, return
+to the minibuffer window, and then yank the text into the argument.
+@xref{Windows}.
 
 @cindex height of minibuffer
 @cindex size of minibuffer
 @cindex growing minibuffer
 @cindex resizing minibuffer
-  There are some restrictions on the use of the minibuffer window,
-however.  You cannot switch buffers in it---the minibuffer and its
-window are permanently attached.  Also, you cannot split or kill the
-minibuffer window.  But you can make it taller in the normal fashion
-with @kbd{C-x ^}.
+  There are some restrictions on the minibuffer window, however: you
+cannot kill it, or split it, or switch buffers in it---the minibuffer
+and its window are permanently attached.
 
 @vindex resize-mini-windows
   The minibuffer window expands vertically as necessary to hold the
 text that you put in the minibuffer.  If @code{resize-mini-windows} is
-@code{t} (the default), the window is always resized to fit the size
-of the text it displays.  If its value is the symbol @code{grow-only},
-the window grows when the size of displayed text increases, but
-shrinks (back to the normal size) only when the minibuffer becomes
-inactive.  If its value is @code{nil}, you have to adjust the height
-yourself.
+@code{t} (the default), the window always resizes as needed by its
+contents.  If its value is the symbol @code{grow-only}, the window
+grows automatically as needed, but shrinks (back to the normal size)
+only when the minibuffer becomes inactive.  If its value is
+@code{nil}, you have to adjust the height yourself.
 
 @vindex max-mini-window-height
   The variable @code{max-mini-window-height} controls the maximum
@@ -167,52 +159,47 @@
 maximum number of lines; @code{nil} means do not resize the minibuffer
 window automatically.  The default value is 0.25.
 
-  If, while in the minibuffer, you issue a command that displays help
-text of any sort in another window, you can use the @kbd{C-M-v}
-command while in the minibuffer to scroll the help text.
-(@kbd{M-@key{PAGEUP}} and @kbd{M-@key{PAGEDOWN}} also operate on that
-help text.)  This lasts until you exit the minibuffer.  This feature
-is especially useful when you display a buffer listing possible
+  The @kbd{C-M-v} command in the minibuffer scrolls the help text from
+commands that display help text of any sort in another window.
+@kbd{M-@key{PAGEUP}} and @kbd{M-@key{PAGEDOWN}} also operate on that
+help text.  This is especially useful with long lists of possible
 completions.  @xref{Other Window}.
 
 @vindex enable-recursive-minibuffers
   Emacs normally disallows most commands that use the minibuffer while
-the minibuffer is active.  This rule is to prevent recursive minibuffers
-from confusing novice users.  If you want to be able to use such
-commands in the minibuffer, set the variable
-@code{enable-recursive-minibuffers} to a non-@code{nil} value.
+the minibuffer is active.  (Entering the minibuffer from the
+minibuffer can be confusing.)  To allow such commands in the
+minibuffer, set the variable @code{enable-recursive-minibuffers} to
+@code{t}.
 
 @node Completion
 @section Completion
 @cindex completion
-
-  For certain kinds of arguments, you can use @dfn{completion} to enter
-the argument value.  Completion means that you type part of the
-argument, then Emacs visibly fills in the rest, or as much as
-can be determined from the part you have typed.
+  
+  Some arguments allow @dfn{completion} to enter their value.  This
+means that after you type part of the argument, Emacs can fill in the
+rest, or some of it, based on what you have typed so far.
 
-  When completion is available, certain keys---@key{TAB}, @key{RET}, and
-@key{SPC}---are rebound to complete the text in the minibuffer before point
-into a longer string that it stands for, by matching it against a set of
-@dfn{completion alternatives} provided by the command reading the
-argument.  @kbd{?} is defined to display a list of possible completions
-of what you have inserted.
+  When completion is available, certain keys---@key{TAB}, @key{RET},
+and @key{SPC}---are rebound to complete the text in the minibuffer
+before point into a longer string chosen from a set of @dfn{completion
+alternatives} provided by the command that requested the argument.
+(@key{SPC} does not do completion in reading file names, because it is
+common to use spaces in file names on some systems.)  @kbd{?} displays
+a list of the possible completions at any time.
 
-  For example, when @kbd{M-x} uses the minibuffer to read the name of
-a command, it provides a list of all available Emacs command names to
-complete against.  The completion keys match the minibuffer text
-against all the command names, find any additional name characters
-implied by the ones already present in the minibuffer, and add those
-characters to the ones you have given.  This is what makes it possible
-to type @kbd{M-x ins @key{SPC} b @key{RET}} instead of @kbd{M-x
-insert-buffer @key{RET}} (for example).  (@key{SPC} does not do
-completion in reading file names, because it is common to use spaces
-in file names on some systems.)
+  For example, @kbd{M-x} uses the minibuffer to read the name of a
+command, so it provides a list of all Emacs command names for
+completion candidates.  The completion keys match the minibuffer text
+against these candidates, find any additional name characters implied
+by the the text already present in the minibuffer, and add those
+characters.  This makes it possible to type @kbd{M-x ins @key{SPC} b
+@key{RET}} instead of @kbd{M-x insert-buffer @key{RET}}, for example.
 
-  Case is normally significant in completion, because it is significant
-in most of the names that you can complete (buffer names, file names and
-command names).  Thus, @samp{fo} does not complete to @samp{Foo}.
-Completion does ignore case distinctions for certain arguments in which
+  Case is significant in completion when it is significant in the
+argument you are entering (buffer names, file names, command names,
+for instance).  Thus, @samp{fo} does not complete to @samp{Foo}.
+Completion ignores case distinctions for certain arguments in which
 case does not matter.
 
   Completion acts only on the text before point.  If there is text in
@@ -230,42 +217,39 @@
 @subsection Completion Example
 
 @kindex TAB @r{(completion)}
-@findex minibuffer-complete
-  A concrete example may help here.  If you type @kbd{M-x au @key{TAB}},
-the @key{TAB} looks for alternatives (in this case, command names) that
-start with @samp{au}.  There are several, including
-@code{auto-fill-mode} and @code{auto-save-mode}---but they are all the
-same as far as @code{auto-}, so the @samp{au} in the minibuffer changes
-to @samp{auto-}.@refill
+  A concrete example may help here.  If you type @kbd{M-x au
+@key{TAB}}, the @key{TAB} looks for alternatives (in this case,
+command names) that start with @samp{au}.  There are several,
+including @code{auto-fill-mode} and @code{auto-save-mode}, but they
+all begin with @code{auto-}, so the @samp{au} in the minibuffer
+completes to @samp{auto-}.
 
-  If you type @key{TAB} again immediately, there are multiple
-possibilities for the very next character---it could be any of
-@samp{cfilrs}---so no more characters are added; instead, @key{TAB}
-displays a list of all possible completions in another window.
+  If you type @key{TAB} again immediately, it cannot determine the
+next character; it could be any of @samp{cfilrs}.  So it does not add
+any characters; instead, @key{TAB} displays a list of all possible
+completions in another window.
 
-  If you go on to type @kbd{f @key{TAB}}, this @key{TAB} sees
-@samp{auto-f}.  The only command name starting this way is
-@code{auto-fill-mode}, so completion fills in the rest of that.  You now
-have @samp{auto-fill-mode} in the minibuffer after typing just @kbd{au
-@key{TAB} f @key{TAB}}.  Note that @key{TAB} has this effect because in
-the minibuffer it is bound to the command @code{minibuffer-complete}
-when completion is available.
+  Now type @kbd{f @key{TAB}}.  This @key{TAB} sees @samp{auto-f}.  The
+only command name starting with that is @code{auto-fill-mode}, so
+completion fills in the rest of that.  You have been able to enter
+@samp{auto-fill-mode} by typing just @kbd{au @key{TAB} f @key{TAB}}.
 
 @node Completion Commands
 @subsection Completion Commands
 
   Here is a list of the completion commands defined in the minibuffer
-when completion is available.
+when completion is allowed.
 
 @table @kbd
 @item @key{TAB}
+@findex minibuffer-complete
 Complete the text before point in the minibuffer as much as possible
 (@code{minibuffer-complete}).
 @item @key{SPC}
-Complete the minibuffer text before point, but don't go beyond one
-word (@code{minibuffer-complete-word}).  @key{SPC} for completion is
-not available when entering a file name, since some users often put
-spaces in filenames.
+Complete up to one word from the minibuffer text before point
+(@code{minibuffer-complete-word}).  @key{SPC} for completion is not
+available when entering a file name, since file names often include
+spaces.
 @item @key{RET}
 Submit the text in the minibuffer as the argument, possibly completing
 first as described
@@ -277,31 +261,30 @@
 Completion}.
 @end ifnottex
 @item ?
-Display a list of all possible completions of the text in the minibuffer
+Display a list of possible completions of the text before point
 (@code{minibuffer-completion-help}).
 @end table
 
 @kindex SPC
 @findex minibuffer-complete-word
-  @key{SPC} completes much like @key{TAB}, but never goes beyond the
-next hyphen or space.  If you have @samp{auto-f} in the minibuffer and
-type @key{SPC}, it finds that the completion is @samp{auto-fill-mode},
-but it stops completing after @samp{fill-}.  This gives
-@samp{auto-fill-}.  Another @key{SPC} at this point completes all the
-way to @samp{auto-fill-mode}.  The command that implements this
-behavior is called @code{minibuffer-complete-word}.
+  @key{SPC} completes like @key{TAB}, but only up to the next hyphen
+or space.  If you have @samp{auto-f} in the minibuffer and type
+@key{SPC}, it finds that the completion is @samp{auto-fill-mode}, but
+it only inserts @samp{ill-}, giving @samp{auto-fill-}.  Another
+@key{SPC} at this point completes all the way to
+@samp{auto-fill-mode}.  The command that implements this behavior is
+called @code{minibuffer-complete-word}.
 
-  Here are some commands you can use to choose a completion from a
-window that displays a list of completions:
+  When you display a list of possible completions, you can choose
+one from it:
 
 @table @kbd
 @findex mouse-choose-completion
 @item Mouse-1
 @itemx Mouse-2
-Clicking mouse button 1 or 2 on a completion in the list of possible
-completions chooses that completion (@code{mouse-choose-completion}).
-You normally use this command while point is in the minibuffer, but you
-must click in the list of completions, not in the minibuffer itself.
+Clicking mouse button 1 or 2 on a completion possibility chooses that
+completion (@code{mouse-choose-completion}).  You must click in the
+list of completions, not in the minibuffer.
 
 @findex switch-to-completions
 @item @key{PRIOR}
@@ -309,98 +292,91 @@
 Typing @key{PRIOR} or @key{PAGE-UP}, or @kbd{M-v}, while in the
 minibuffer, selects the window showing the completion list buffer
 (@code{switch-to-completions}).  This paves the way for using the
-commands below.  (Selecting that window in the usual ways has the same
-effect, but this way is more convenient.)
+commands below.  (Selecting that window in other ways has the same
+effect.)
 
 @findex choose-completion
 @item @key{RET}
 Typing @key{RET} @emph{in the completion list buffer} chooses the
 completion that point is in or next to (@code{choose-completion}).  To
-use this command, you must first switch windows to the window that shows
-the list of completions.
+use this command, you must first switch to the completion list window.
 
 @findex next-completion
 @item @key{RIGHT}
 Typing the right-arrow key @key{RIGHT} @emph{in the completion list
-buffer} moves point to the following completion (@code{next-completion}).
+buffer} moves point to the following completion possibility
+(@code{next-completion}).
 
 @findex previous-completion
 @item @key{LEFT}
 Typing the left-arrow key @key{LEFT} @emph{in the completion list
-buffer} moves point toward the beginning of the buffer, to the previous
-completion (@code{previous-completion}).
+buffer} moves point to the previous completion possibility
+(@code{previous-completion}).
 @end table
 
 @node Strict Completion
 @subsection Strict Completion
 
-  There are three different ways that @key{RET} can work in completing
-minibuffers, depending on how the argument will be used.
+  There are three different ways that @key{RET} can do completion,
+depending on how the argument will be used.
 
 @itemize @bullet
 @item
-@dfn{Strict} completion is used when it is meaningless to give any
-argument except one of the known alternatives.  For example, when
-@kbd{C-x k} reads the name of a buffer to kill, it is meaningless to
-give anything but the name of an existing buffer.  In strict
-completion, @key{RET} refuses to exit if the text in the minibuffer
-does not complete to an exact match.
+@dfn{Strict} completion accepts only known completion candidates.  For
+example, when @kbd{C-x k} reads the name of a buffer to kill, only the
+name of an existing buffer makes sense.  In strict completion,
+@key{RET} refuses to exit if the text in the minibuffer does not
+complete to an exact match.
 
 @item
 @dfn{Cautious} completion is similar to strict completion, except that
-@key{RET} exits only if the text was an exact match already, not
-needing completion.  If the text is not an exact match, @key{RET} does
-not exit, but it does complete the text.  If it completes to an exact
-match, a second @key{RET} will exit.
+@key{RET} exits only if the text is an already exact match.
+Otherwise, @key{RET} does not exit, but it does complete the text.  If
+that completes to an exact match, a second @key{RET} will exit.
 
 Cautious completion is used for reading file names for files that must
-already exist.
+already exist, for example.
 
 @item
-@dfn{Permissive} completion is used when any string whatever is
-meaningful, and the list of completion alternatives is just a guide.
-For example, when @kbd{C-x C-f} reads the name of a file to visit, any
-file name is allowed, in case you want to create a file.  In
-permissive completion, @key{RET} takes the text in the minibuffer
-exactly as given, without completing it.
+@dfn{Permissive} completion allows any input; the completion
+candidates are just suggestions.  For example, when @kbd{C-x C-f}
+reads the name of a file to visit, any file name is allowed, including
+nonexistent file (in case you want to create a file).  In permissive
+completion, @key{RET} does not complete, it just submits the argument
+as you have entered it.
 @end itemize
 
-  The completion commands display a list of all possible completions in
-a window whenever there is more than one possibility for the very next
-character.  Also, typing @kbd{?} explicitly requests such a list.  If
-the list of completions is long, you can scroll it with @kbd{C-M-v}
-(@pxref{Other Window}).
+  The completion commands display a list of all possible completions
+whenever they can't determine even one more character by completion.
+Also, typing @kbd{?} explicitly requests such a list.  You can scroll
+the list with @kbd{C-M-v} (@pxref{Other Window}).
 
 @node Completion Options
 @subsection Completion Options
 
 @vindex completion-ignored-extensions
 @cindex ignored file names, in completion
-  When completion is done on file names, certain file names are usually
-ignored.  The variable @code{completion-ignored-extensions} contains a
-list of strings; a file whose name ends in any of those strings is
-ignored as a possible completion.  The standard value of this variable
-has several elements including @code{".o"}, @code{".elc"}, @code{".dvi"}
-and @code{"~"}.  The effect is that, for example, @samp{foo} can
-complete to @samp{foo.c} even though @samp{foo.o} exists as well.
-However, if @emph{all} the possible completions end in ``ignored''
-strings, then they are not ignored.  Ignored extensions do not apply to
-lists of completions---those always mention all possible completions.
+  When completing file names, certain file names are usually ignored.
+The variable @code{completion-ignored-extensions} contains a list of
+strings; a file name ending in any of those strings is ignored as a
+completion candidate.  The standard value of this variable has several
+elements including @code{".o"}, @code{".elc"}, @code{".dvi"} and
+@code{"~"}.  The effect is that, for example, @samp{foo} can complete
+to @samp{foo.c} even though @samp{foo.o} exists as well.  However, if
+@emph{all} the possible completions end in ``ignored'' strings, then
+they are not ignored.  Displaying a list of possible completions
+disregards @code{completion-ignored-extensions}; it shows them all.
 
-  If an element of the list in @code{completion-ignored-extensions} ends
-in a slash @file{/}, it indicates a subdirectory that should be ignored
-when completing file names.  Elements of
+  If an element of @code{completion-ignored-extensions} ends in a
+slash (@file{/}), it's a subdirectory name; then that directory and
+its contents are ignored.  Elements of
 @code{completion-ignored-extensions} which do not end in a slash are
-never considered when a completion candidate is a directory; thus,
-completion returns directories whose names end in @file{.elc} even
-though there's an element @code{".elc"} in the list.
+ordinary file names, and do not apply to names of directories.
 
 @vindex completion-auto-help
-  Normally, a completion command that cannot determine even one
-additional character automatically displays a list of all possible
-completions.  If the variable @code{completion-auto-help} is set to
-@code{nil}, this automatic display is disabled, so you must type
-@kbd{?} to display the list of completions.
+  If @code{completion-auto-help} is set to @code{nil}, the completion
+commands never display a list of possibilities; you must type @kbd{?}
+to display the list.
 
 @cindex Partial Completion mode
 @vindex partial-completion-mode
@@ -408,30 +384,29 @@
   Partial Completion mode implements a more powerful kind of
 completion that can complete multiple words in parallel.  For example,
 it can complete the command name abbreviation @code{p-b} into
-@code{print-buffer}, because no other command starts with two words
-whose initials are @samp{p} and @samp{b}.
+@code{print-buffer} if no other command starts with two words whose
+initials are @samp{p} and @samp{b}.
+
+  To enable this mode, use @kbd{M-x partial-completion-mode}, or
+customize the variable @code{partial-completion-mode}.  This mode
+binds special partial completion commands to @key{TAB}, @key{SPC},
+@key{RET}, and @kbd{?} in the minibuffer.  The usual completion
+commands are available on @kbd{M-@key{TAB}} (or @kbd{C-M-i}),
+@kbd{M-@key{SPC}}, @kbd{M-@key{RET}} and @kbd{M-?}.
 
   Partial completion of directories in file names uses @samp{*} to
 indicate the places for completion; thus, @file{/u*/b*/f*} might
-complete to @file{/usr/bin/foo}.
-
-  For remote files, partial completion enables completion of methods,
-user names and host names.  @xref{Remote Files}.
-
-  To enable this mode, use the command @kbd{M-x
-partial-completion-mode}, or customize the variable
-@code{partial-completion-mode}.  This binds the partial completion
-commands to @key{TAB}, @key{SPC}, @key{RET}, and @kbd{?}.  The usual
-completion commands are available on @kbd{M-@key{TAB}} (or
-@kbd{C-M-i}), @kbd{M-@key{SPC}}, @kbd{M-@key{RET}} and @kbd{M-?}.
+complete to @file{/usr/bin/foo}.  For remote files, partial completion
+enables completion of methods, user names and host names.
+@xref{Remote Files}.
 
 @vindex PC-include-file-path
 @vindex PC-disable-includes
-  Another feature of Partial Completion mode is to extend
-@code{find-file} so that @samp{<@var{include}>} stands for the
-file named @var{include} in some directory in the path
-@code{PC-include-file-path}.  If you set @code{PC-disable-includes} to
-non-@code{nil}, this feature is disabled.
+  Partial Completion mode also extends @code{find-file} so that
+@samp{<@var{include}>} looks for the file named @var{include} in the
+directories in the path @code{PC-include-file-path}.  If you set
+@code{PC-disable-includes} to non-@code{nil}, this feature is
+disabled.
 
 @cindex Icomplete mode
 @findex icomplete-mode
@@ -446,52 +421,50 @@
 @cindex history of minibuffer input
 
   Every argument that you enter with the minibuffer is saved on a
-@dfn{minibuffer history list} so that you can use it again later in
-another argument.  Special commands load the text of an earlier argument
-in the minibuffer.  They discard the old minibuffer contents, so you can
-think of them as moving through the history of previous arguments.
+@dfn{minibuffer history list} so you can easily use it again later.
+Special commands fetch the text of an earlier argument into the
+minibuffer, replacing the old minibuffer contents.  You can think of
+them as moving through the history of previous arguments.
 
 @table @kbd
 @item @key{UP}
 @itemx M-p
-Move to the next earlier argument string saved in the minibuffer history
+Move to the previous item in the minibuffer history, an earlier argument
 (@code{previous-history-element}).
 @item @key{DOWN}
 @itemx M-n
-Move to the next later argument string saved in the minibuffer history
+Move to the next item in the minibuffer history
 (@code{next-history-element}).
 @item M-r @var{regexp} @key{RET}
-Move to an earlier saved argument in the minibuffer history that has a
-match for @var{regexp} (@code{previous-matching-history-element}).
+Move to an earlier item in the minibuffer history that 
+matches @var{regexp} (@code{previous-matching-history-element}).
 @item M-s @var{regexp} @key{RET}
-Move to a later saved argument in the minibuffer history that has a
-match for @var{regexp} (@code{next-matching-history-element}).
+Move to a later item in the minibuffer history that matches
+@var{regexp} (@code{next-matching-history-element}).
 @end table
 
 @kindex M-p @r{(minibuffer history)}
 @kindex M-n @r{(minibuffer history)}
 @findex next-history-element
 @findex previous-history-element
-  The simplest way to reuse the saved arguments in the history list is
-to move through the history list one element at a time.  While in the
-minibuffer, use @kbd{M-p} or up-arrow
-(@code{previous-history-element}) to ``move to'' the next earlier
-minibuffer input, and use @kbd{M-n} or down-arrow
-(@code{next-history-element}) to ``move to'' the next later input.
-These commands don't move the cursor, they bring different saved
-strings into the minibuffer.  But you can think of them as ``moving''
-through the history list.
+  To move through the minibuffer history list one item at a time, use
+@kbd{M-p} or up-arrow (@code{previous-history-element}) to fetch the
+next earlier minibuffer input, and use @kbd{M-n} or down-arrow
+(@code{next-history-element}) to fetch the next later input.  These
+commands don't move the cursor, they pull different saved strings into
+the minibuffer.  But you can think of them as ``moving'' through the
+history list.
 
-  The previous input that you fetch from the history entirely replaces
-the contents of the minibuffer.  To use it as the argument, exit the
-minibuffer as usual with @key{RET}.  You can also edit the text before
-you reuse it; this does not change the history element that you
-``moved'' to, but your new argument does go at the end of the history
-list in its own right.
+  The input that you fetch from the history entirely replaces the
+contents of the minibuffer.  To use it again unchanged, just type
+@key{RET}.  You can also edit the text before you reuse it; this does
+not change the history element that you ``moved'' to, but your new
+argument does go at the end of the history list in its own right.
 
-  For many minibuffer arguments there is a ``default'' value.  Then
-you can insert the default value into the minibuffer as text by using
-@kbd{M-n} to move ``into the future'' in the history.
+  For many minibuffer arguments there is a ``default'' value.  You can
+insert the default value into the minibuffer as text by using
+@kbd{M-n}.  You can think of this as moving ``into the future'' in the
+history.
 
 @findex previous-matching-history-element
 @findex next-matching-history-element
@@ -499,14 +472,13 @@
 @kindex M-s @r{(minibuffer history)}
   There are also commands to search forward or backward through the
 history; they search for history elements that match a regular
-expression that you specify with the minibuffer.  @kbd{M-r}
-(@code{previous-matching-history-element}) searches older elements in
-the history, while @kbd{M-s} (@code{next-matching-history-element})
-searches newer elements.  By special dispensation, these commands can
-use the minibuffer to read their arguments even though you are already
-in the minibuffer when you issue them.  As with incremental searching,
-an upper-case letter in the regular expression makes the search
-case-sensitive (@pxref{Search Case}).
+expression.  @kbd{M-r} (@code{previous-matching-history-element})
+searches older elements in the history, while @kbd{M-s}
+(@code{next-matching-history-element}) searches newer elements.  These
+commands are unusual; they use the minibuffer to read the regular
+expression even though they are invoked from the minibuffer.  As with
+incremental searching, an upper-case letter in the regular expression
+makes the search case-sensitive (@pxref{Search Case}).
 
 @ignore
   We may change the precise way these commands read their arguments.
@@ -519,46 +491,45 @@
 @end ignore
 
   All uses of the minibuffer record your input on a history list, but
-there are separate history lists for different kinds of arguments.  For
-example, there is a list for file names, used by all the commands that
-read file names.  (As a special feature, this history list records
-the absolute file name, no more and no less, even if that is not how
-you entered the file name.)
+there are separate history lists for different kinds of arguments.
+For example, there is a list for file names, used by all the commands
+that read file names.  (As a special feature, this history list
+records the absolute file name, even if the name you entered was not
+absolute.)
 
-  There are several other very specific history lists, including one for
-command names read by @kbd{M-x}, one for buffer names, one for arguments
-of commands like @code{query-replace}, and one for compilation commands
-read by @code{compile}.  Finally, there is one ``miscellaneous'' history
-list that most minibuffer arguments use.
+  There are several other specific history lists, including one for
+buffer names, one for arguments of commands like @code{query-replace},
+one used by @kbd{M-x} for command names, and one used by
+@code{compile} for compilation commands.  Finally, there is one
+``miscellaneous'' history list that most minibuffer arguments use.
 
 @vindex history-length
   The variable @code{history-length} specifies the maximum length of a
-minibuffer history list; once a list gets that long, the oldest element
-is deleted each time an element is added.  If the value of
-@code{history-length} is @code{t}, though, there is no maximum length
-and elements are never deleted.
+minibuffer history list; adding a new element deletes the oldest
+element if the list gets too long.  If the value of
+@code{history-length} is @code{t}, though, there is no maximum length.
 
 @vindex history-delete-duplicates
   The variable @code{history-delete-duplicates} specifies whether to
-delete duplicates in history.  If the value of @code{history-delete-duplicates}
-is @code{t}, that means when adding a new history element, all
-previous identical elements are deleted.
+delete duplicates in history.  If it is @code{t}, adding a new element
+deletes from the list all other elements that are equal to it.
 
 @node Repetition
 @section Repeating Minibuffer Commands
 @cindex command history
 @cindex history of commands
 
-  Every command that uses the minibuffer at least once is recorded on a
-special history list, together with the values of its arguments, so that
-you can repeat the entire command.  In particular, every use of
-@kbd{M-x} is recorded there, since @kbd{M-x} uses the minibuffer to read
-the command name.
+  Every command that uses the minibuffer once is recorded on a special
+history list, the @dfn{command history}, together with the values of
+its arguments, so that you can repeat the entire command.  In
+particular, every use of @kbd{M-x} is recorded there, since @kbd{M-x}
+uses the minibuffer to read the command name.
 
 @findex list-command-history
 @table @kbd
 @item C-x @key{ESC} @key{ESC}
-Re-execute a recent minibuffer command (@code{repeat-complex-command}).
+Re-execute a recent minibuffer command from the command history
+ (@code{repeat-complex-command}).
 @item M-x list-command-history
 Display the entire command history, showing all the commands
 @kbd{C-x @key{ESC} @key{ESC}} can repeat, most recent first.
@@ -566,36 +537,33 @@
 
 @kindex C-x ESC ESC
 @findex repeat-complex-command
-  @kbd{C-x @key{ESC} @key{ESC}} is used to re-execute a recent
-minibuffer-using command.  With no argument, it repeats the last such
-command.  A numeric argument specifies which command to repeat; one
-means the last one, and larger numbers specify earlier ones.
+  @kbd{C-x @key{ESC} @key{ESC}} is used to re-execute a recent command
+that used the minibuffer.  With no argument, it repeats the last such
+command.  A numeric argument specifies which command to repeat; 1
+means the last one, 2 the previous, and so on.
 
   @kbd{C-x @key{ESC} @key{ESC}} works by turning the previous command
 into a Lisp expression and then entering a minibuffer initialized with
-the text for that expression.  If you type just @key{RET}, the command
-is repeated as before.  You can also change the command by editing the
-Lisp expression.  Whatever expression you finally submit is what will be
-executed.  The repeated command is added to the front of the command
-history unless it is identical to the most recently executed command
-already there.
-
-  Even if you don't understand Lisp syntax, it will probably be obvious
-which command is displayed for repetition.  If you do not change the
-text, it will repeat exactly as before.
+the text for that expression.  Even if you don't understand Lisp
+syntax, it will probably be obvious which command is displayed for
+repetition.  If you type just @key{RET}, that repeats the command
+unchanged.  You can also change the command by editing the Lisp
+expression before you execute it.  The repeated command is added to
+the front of the command history unless it is identical to the most
+recently item.
 
   Once inside the minibuffer for @kbd{C-x @key{ESC} @key{ESC}}, you can
 use the minibuffer history commands (@kbd{M-p}, @kbd{M-n}, @kbd{M-r},
 @kbd{M-s}; @pxref{Minibuffer History}) to move through the history list
 of saved entire commands.  After finding the desired previous command,
-you can edit its expression as usual and then resubmit it by typing
-@key{RET} as usual.
+you can edit its expression as usual and then repeat it by typing
+@key{RET}.
 
 @vindex isearch-resume-in-command-history
-  Incremental search does not, strictly speaking, use the minibuffer,
-but it does something similar.  Although it behaves like a complex command,
-it normally does not appear in the history list for @kbd{C-x
-@key{ESC} @key{ESC}}.  You can make it appear in the history by
+  Incremental search does not, strictly speaking, use the minibuffer.
+Therefore, although it behaves like a complex command, it normally
+does not appear in the history list for @kbd{C-x @key{ESC} @key{ESC}}.
+You can make incremental search commands appear in the history by
 setting @code{isearch-resume-in-command-history} to a non-@code{nil}
 value.  @xref{Incremental Search}.