changeset 84230:c6c2d1e7f3e4

Move here from ../../man
author Glenn Morris <rgm@gnu.org>
date Thu, 06 Sep 2007 04:44:54 +0000
parents bb21f14d6ad2
children 0a6eccff1e0d
files doc/emacs/custom.texi
diffstat 1 files changed, 2515 insertions(+), 0 deletions(-) [+]
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/doc/emacs/custom.texi	Thu Sep 06 04:44:54 2007 +0000
@@ -0,0 +1,2515 @@
+@c This is part of the Emacs manual.
+@c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2000, 2001,
+@c   2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+@c See file emacs.texi for copying conditions.
+@node Customization, Quitting, Amusements, Top
+@chapter Customization
+@cindex customization
+
+  This chapter talks about various topics relevant to adapting the
+behavior of Emacs in ways we have anticipated.
+@iftex
+See @cite{The Emacs Lisp Reference Manual}
+@end iftex
+@ifnottex
+@xref{Top, Emacs Lisp, Emacs Lisp, elisp, The Emacs Lisp
+Reference Manual},
+@end ifnottex
+for how to make more far-reaching and open-ended changes.  @xref{X
+Resources}, for information on using X resources to customize Emacs.
+
+  Customization that you do within Emacs normally affects only the
+particular Emacs session that you do it in---it does not persist
+between sessions unless you save the customization in a file such as
+your init file (@file{.emacs}) that will affect future sessions.
+(@xref{Init File}.)  When you tell the customization buffer to save
+customizations for future sessions, this actually works by editing
+@file{.emacs} for you.
+
+  Another means of customization is the keyboard macro, which is a
+sequence of keystrokes to be replayed with a single command.
+@xref{Keyboard Macros}, for full instruction how to record, manage, and
+replay sequences of keys.
+
+@menu
+* Minor Modes::		Each minor mode is one feature you can turn on
+			  independently of any others.
+* Easy Customization::  Convenient way to browse and change settings.
+* Variables::		Many Emacs commands examine Emacs variables
+			  to decide what to do; by setting variables,
+			  you can control their functioning.
+* Key Bindings::	The keymaps say what command each key runs.
+			  By changing them, you can "redefine keys".
+* Syntax::		The syntax table controls how words and
+			  expressions are parsed.
+* Init File::		How to write common customizations in the
+			  @file{.emacs} file.
+@end menu
+
+@node Minor Modes
+@section Minor Modes
+@cindex minor modes
+@cindex mode, minor
+
+  Minor modes are optional features which you can turn on or off.  For
+example, Auto Fill mode is a minor mode in which @key{SPC} breaks lines
+between words as you type.  All the minor modes are independent of each
+other and of the selected major mode.  Most minor modes say in the mode
+line when they are enabled; for example, @samp{Fill} in the mode line means
+that Auto Fill mode is enabled.
+
+  You should append @code{-mode} to the name of a minor mode to
+produce the name of the command that turns the mode on or off.  Thus,
+the command to enable or disable Auto Fill mode is called
+@code{auto-fill-mode}.  These commands are usually invoked with
+@kbd{M-x}, but you can bind keys to them if you wish.
+
+  With no argument, the minor mode function turns the mode on if it
+was off, and off if it was on.  This is known as @dfn{toggling}.  A
+positive argument always turns the mode on, and an explicit zero
+argument or a negative argument always turns it off.
+
+  Some minor modes are global: while enabled, they affect everything
+you do in the Emacs session, in all buffers.  Other minor modes are
+buffer-local; they apply only to the current buffer, so you can enable
+the mode in certain buffers and not others.
+
+  For most minor modes, the command name is also the name of a
+variable.  The variable's value is non-@code{nil} if the mode is
+enabled and @code{nil} if it is disabled.  Some minor-mode commands
+work by just setting the variable.  For example, the command
+@code{abbrev-mode} works by setting the value of @code{abbrev-mode} as
+a variable; it is this variable that directly turns Abbrev mode on and
+off.  You can directly set the variable's value instead of calling the
+mode function.  For other minor modes, you need to either set the
+variable through the Customize interface or call the mode function to
+correctly enable or disable the mode.  To check which of these two
+possibilities applies to a given minor mode, use @kbd{C-h v} to ask
+for documentation on the variable name.
+
+  For minor mode commands that work by just setting the minor mode
+variable, that variable provides a good way for Lisp programs to turn
+minor modes on and off; it is also useful in a file's local variables
+list (@pxref{File Variables}).  But please think twice before setting
+minor modes with a local variables list, because most minor modes are
+a matter of user preference---other users editing the same file might
+not want the same minor modes you prefer.
+
+  The most useful buffer-local minor modes include Abbrev mode, Auto
+Fill mode, Auto Save mode, Font-Lock mode, Glasses mode, Outline minor
+mode, Overwrite mode, and Binary Overwrite mode.
+
+  Abbrev mode allows you to define abbreviations that automatically expand
+as you type them.  For example, @samp{amd} might expand to @samp{abbrev
+mode}.  @xref{Abbrevs}, for full information.
+
+  Auto Fill mode allows you to enter filled text without breaking lines
+explicitly.  Emacs inserts newlines as necessary to prevent lines from
+becoming too long.  @xref{Filling}.
+
+  Auto Save mode saves the buffer contents periodically to reduce the
+amount of work you can lose in case of a crash.  @xref{Auto Save}.
+
+  Enriched mode enables editing and saving of formatted text.
+@xref{Formatted Text}.
+
+  Flyspell mode automatically highlights misspelled words.
+@xref{Spelling}.
+
+  Font-Lock mode automatically highlights certain textual units found
+in programs, such as comments, strings, and function names being
+defined.  This requires a display that can show multiple fonts or
+colors.  @xref{Faces}.
+
+@ignore
+  ISO Accents mode makes the characters @samp{`}, @samp{'}, @samp{"},
+@samp{^}, @samp{/} and @samp{~} combine with the following letter, to
+produce an accented letter in the ISO Latin-1 character set.  The
+newer and more general feature of input methods more or less
+supersedes ISO Accents mode.  @xref{Unibyte Mode}.
+@end ignore
+
+  Outline minor mode provides the same facilities as the major mode
+called Outline mode; but since it is a minor mode instead, you can
+combine it with any major mode.  @xref{Outline Mode}.
+
+@cindex Overwrite mode
+@cindex mode, Overwrite
+  Overwrite mode causes ordinary printing characters to replace existing
+text instead of shoving it to the right.  For example, if point is in
+front of the @samp{B} in @samp{FOOBAR}, then in Overwrite mode typing a
+@kbd{G} changes it to @samp{FOOGAR}, instead of producing @samp{FOOGBAR}
+as usual.  In Overwrite mode, the command @kbd{C-q} inserts the next
+character whatever it may be, even if it is a digit---this gives you a
+way to insert a character instead of replacing an existing character.
+
+@findex overwrite-mode
+@kindex INSERT
+  The command @code{overwrite-mode} is an exception to the rule that
+commands which toggle minor modes are normally not bound to keys: it is
+bound to the @key{INSERT} function key.  This is because many other
+programs bind @key{INSERT} to similar functions.
+
+@findex binary-overwrite-mode
+  Binary Overwrite mode is a variant of Overwrite mode for editing
+binary files; it treats newlines and tabs like other characters, so that
+they overwrite other characters and can be overwritten by them.
+In Binary Overwrite mode, digits after @kbd{C-q} specify an
+octal character code, as usual.
+
+  Here are some useful minor modes that normally apply to all buffers
+at once.  Since Line Number mode and Transient Mark mode can be
+enabled or disabled just by setting the value of the minor mode
+variable, you @emph{can} set them differently for particular buffers,
+by explicitly making the corresponding variable local in those
+buffers.  @xref{Locals}.
+
+  Icomplete mode displays an indication of available completions when
+you are in the minibuffer and completion is active.  @xref{Completion
+Options}.
+
+  Line Number mode enables continuous display in the mode line of the
+line number of point, and Column Number mode enables display of the
+column number.  @xref{Mode Line}.
+
+  Scroll Bar mode gives each window a scroll bar (@pxref{Scroll Bars}).
+Menu Bar mode gives each frame a menu bar (@pxref{Menu Bars}).  Both of
+these modes are enabled by default when you use the X Window System.
+
+  In Transient Mark mode, every change in the buffer contents
+``deactivates'' the mark, so that commands that operate on the region
+will get an error.  This means you must either set the mark, or
+explicitly ``reactivate'' it, before each command that uses the region.
+The advantage of Transient Mark mode is that Emacs can display the
+region highlighted.  @xref{Mark}.
+
+@node Easy Customization
+@section Easy Customization Interface
+
+@cindex settings
+  Emacs has many @dfn{settings} which have values that you can specify
+in order to customize various commands.  Many are documented in this
+manual.  Most settings are @dfn{user options}---that is to say, Lisp
+variables (@pxref{Variables})---so their names appear in the Variable
+Index (@pxref{Variable Index}).  The other settings are faces and
+their attributes (@pxref{Faces}).
+
+@findex customize
+@cindex customization buffer
+  You can browse interactively through settings and change them using
+@kbd{M-x customize}.  This command creates a @dfn{customization
+buffer}, which offers commands to navigate through a logically
+organized structure of the Emacs settings; you can also use it to edit
+and set their values, and to save settings permanently in your
+@file{~/.emacs} file (@pxref{Init File}).
+
+  The appearance of the example buffers in this section is typically
+different under a graphical display, since faces are then used to indicate
+buttons, links and editable fields.
+
+@menu
+* Groups: Customization Groups.   How settings are classified in a structure.
+* Browsing: Browsing Custom.   Browsing and searching for settings.
+* Changing a Variable::      How to edit an option's value and set the option.
+* Saving Customizations::    Specifying the file for saving customizations.
+* Face Customization::       How to edit the attributes of a face.
+* Specific Customization::   Making a customization buffer for specific
+                                variables, faces, or groups.
+* Custom Themes::            How to define collections of customized options
+                                that can be loaded and unloaded together.
+@end menu
+
+@node Customization Groups
+@subsection Customization Groups
+@cindex customization groups
+
+  For customization purposes, settings are organized into @dfn{groups}
+to help you find them.  Groups are collected into bigger groups, all
+the way up to a master group called @code{Emacs}.
+
+  @kbd{M-x customize} creates a customization buffer that shows the
+top-level @code{Emacs} group and the second-level groups immediately
+under it.  It looks like this, in part:
+
+@c we want the buffer example to all be on one page, but unfortunately
+@c that's quite a bit of text, so force all space to the bottom.
+@page
+@smallexample
+@group
+/- Emacs group: ---------------------------------------------------\
+      [State]: visible group members are all at standard values.
+   Customization of the One True Editor.
+   See also [Manual].
+
+Editing group: [Go to Group]
+Basic text editing facilities.
+
+External group: [Go to Group]
+Interfacing to external utilities.
+
+@var{more second-level groups}
+
+\- Emacs group end ------------------------------------------------/
+@end group
+@end smallexample
+
+@noindent
+This says that the buffer displays the contents of the @code{Emacs}
+group.  The other groups are listed because they are its contents.  But
+they are listed differently, without indentation and dashes, because
+@emph{their} contents are not included.  Each group has a single-line
+documentation string; the @code{Emacs} group also has a @samp{[State]}
+line.
+
+@cindex editable fields (customization buffer)
+@cindex buttons (customization buffer)
+@cindex links (customization buffer)
+  Most of the text in the customization buffer is read-only, but it
+typically includes some @dfn{editable fields} that you can edit.
+There are also @dfn{buttons} and @dfn{links}, which do something when
+you @dfn{invoke} them.  To invoke a button or a link, either click on
+it with @kbd{Mouse-1}, or move point to it and type @key{RET}.
+
+  For example, the phrase @samp{[State]} that appears in
+a second-level group is a button.  It operates on the same
+customization buffer.  The phrase @samp{[Go to Group]} is a kind
+of hypertext link to another group.  Invoking it creates a new
+customization buffer, which shows that group and its contents.
+
+  The @code{Emacs} group includes a few settings, but mainly it
+contains other groups, which contain more groups, which contain the
+settings.  By browsing the hierarchy of groups, you will eventually
+find the feature you are interested in customizing.  Then you can use
+the customization buffer to set that feature's settings.  You can also
+go straight to a particular group by name, using the command @kbd{M-x
+customize-group}.
+
+@node Browsing Custom
+@subsection Browsing and Searching for Options and Faces
+@findex customize-browse
+
+  @kbd{M-x customize-browse} is another way to browse the available
+settings.  This command creates a special customization buffer which
+shows only the names of groups and settings, and puts them in a
+structure.
+
+  In this buffer, you can show the contents of a group by invoking the
+@samp{[+]} button.  When the group contents are visible, this button
+changes to @samp{[-]}; invoking that hides the group contents again.
+
+  Each group or setting in this buffer has a link which says
+@samp{[Group]}, @samp{[Option]} or @samp{[Face]}.  Invoking this link
+creates an ordinary customization buffer showing just that group and
+its contents, just that user option, or just that face.  This is the
+way to change settings that you find with @kbd{M-x customize-browse}.
+
+  If you can guess part of the name of the settings you are interested
+in, @kbd{M-x customize-apropos} is another way to search for settings.
+However, unlike @code{customize} and @code{customize-browse},
+@code{customize-apropos} can only find groups and settings that are
+loaded in the current Emacs session.  @xref{Specific Customization,,
+Customizing Specific Items}.
+
+@node Changing a Variable
+@subsection Changing a Variable
+
+  Here is an example of what a variable (a user option) looks like in
+the customization buffer:
+
+@smallexample
+Kill Ring Max: [Hide Value] 60
+   [State]: STANDARD.
+Maximum length of kill ring before oldest elements are thrown away.
+@end smallexample
+
+  The text following @samp{[Hide Value]}, @samp{60} in this case, indicates
+the current value of the variable.  If you see @samp{[Show Value]} instead of
+@samp{[Hide Value]}, it means that the value is hidden; the customization
+buffer initially hides values that take up several lines.  Invoke
+@samp{[Show Value]} to show the value.
+
+  The line after the variable name indicates the @dfn{customization
+state} of the variable: in the example above, it says you have not
+changed the option yet.  The @samp{[State]} button at the beginning of
+this line gives you a menu of various operations for customizing the
+variable.
+
+  The line after the @samp{[State]} line displays the beginning of the
+variable's documentation string.  If there are more lines of
+documentation, this line ends with a @samp{[More]} button; invoke that
+to show the full documentation string.
+
+  To enter a new value for @samp{Kill Ring Max}, move point to the
+value and edit it textually.  For example, you can type @kbd{M-d},
+then insert another number.  As you begin to alter the text, you will
+see the @samp{[State]} line change to say that you have edited the
+value:
+
+@smallexample
+[State]: EDITED, shown value does not take effect until you set or @r{@dots{}}
+                                                           save it.
+@end smallexample
+
+@cindex user options, how to set
+@cindex variables, how to set
+@cindex settings, how to set
+  Editing the value does not actually set the variable.  To do that,
+you must @dfn{set} the variable.  To do this, invoke the
+@samp{[State]} button and choose @samp{Set for Current Session}.
+
+  The state of the variable changes visibly when you set it:
+
+@smallexample
+[State]: SET for current session only.
+@end smallexample
+
+   You don't have to worry about specifying a value that is not valid;
+the @samp{Set for Current Session} operation checks for validity and
+will not install an unacceptable value.
+
+@kindex M-TAB @r{(customization buffer)}
+@findex widget-complete
+  While editing a field that is a file name, directory name,
+command name, or anything else for which completion is defined, you
+can type @kbd{M-@key{TAB}} (@code{widget-complete}) to do completion.
+(@kbd{@key{ESC} @key{TAB}} and @kbd{C-M-i} do the same thing.)
+
+  Some variables have a small fixed set of possible legitimate values.
+These variables don't let you edit the value textually.  Instead, a
+@samp{[Value Menu]} button appears before the value; invoke this
+button to change the value.  For a boolean ``on or off'' value, the
+button says @samp{[Toggle]}, and it changes to the other value.
+@samp{[Value Menu]} and @samp{[Toggle]} simply edit the buffer; the
+changes take real effect when you use the @samp{Set for Current
+Session} operation.
+
+  Some variables have values with complex structure.  For example, the
+value of @code{file-coding-system-alist} is an association list.  Here
+is how it appears in the customization buffer:
+
+@smallexample
+File Coding System Alist: [Hide Value]
+[INS] [DEL] File regexp: \.elc\'
+            Choice: [Value Menu] Encoding/decoding pair:
+            Decoding: emacs-mule
+            Encoding: emacs-mule
+[INS] [DEL] File regexp: \(\`\|/\)loaddefs.el\'
+            Choice: [Value Menu] Encoding/decoding pair:
+            Decoding: raw-text
+            Encoding: raw-text-unix
+[INS] [DEL] File regexp: \.tar\'
+            Choice: [Value Menu] Encoding/decoding pair:
+            Decoding: no-conversion
+            Encoding: no-conversion
+[INS] [DEL] File regexp:
+            Choice: [Value Menu] Encoding/decoding pair:
+            Decoding: undecided
+            Encoding: nil
+[INS]
+   [State]: STANDARD.
+Alist to decide a coding system to use for a file I/O @r{@dots{}}
+                                operation. [Hide Rest]
+The format is ((PATTERN . VAL) ...),
+where PATTERN is a regular expression matching a file name,
+@r{[@dots{}more lines of documentation@dots{}]}
+@end smallexample
+
+@noindent
+Each association in the list appears on four lines, with several
+editable fields and/or buttons.  You can edit the regexps and coding
+systems using ordinary editing commands.  You can also invoke
+@samp{[Value Menu]} to switch to a different kind of value---for
+instance, to specify a function instead of a pair of coding systems.
+
+To delete an association from the list, invoke the @samp{[DEL]} button
+for that item.  To add an association, invoke @samp{[INS]} at the
+position where you want to add it.  There is an @samp{[INS]} button
+between each pair of associations, another at the beginning and another
+at the end, so you can add a new association at any position in the
+list.
+
+@kindex TAB @r{(customization buffer)}
+@kindex S-TAB @r{(customization buffer)}
+@findex widget-forward
+@findex widget-backward
+  Two special commands, @key{TAB} and @kbd{S-@key{TAB}}, are useful
+for moving through the customization buffer.  @key{TAB}
+(@code{widget-forward}) moves forward to the next button or editable
+field; @kbd{S-@key{TAB}} (@code{widget-backward}) moves backward to
+the previous button or editable field.
+
+  Typing @key{RET} on an editable field also moves forward, just like
+@key{TAB}.  We set it up this way because people often type @key{RET}
+when they are finished editing a field.  To insert a newline within an
+editable field, use @kbd{C-o} or @kbd{C-q C-j}.
+
+@cindex saving a setting
+@cindex settings, how to save
+  Setting the variable changes its value in the current Emacs session;
+@dfn{saving} the value changes it for future sessions as well.  To
+save the variable, invoke @samp{[State]} and select the @samp{Save for
+Future Sessions} operation.  This works by writing code so as to set
+the variable again, each time you start Emacs (@pxref{Saving
+Customizations}).
+
+  You can also restore the variable to its standard value by invoking
+@samp{[State]} and selecting the @samp{Erase Customization} operation.
+There are actually four reset operations:
+
+@table @samp
+@item Undo Edits
+If you have made some modifications and not yet set the variable,
+this restores the text in the customization buffer to match
+the actual value.
+
+@item Reset to Saved
+This restores the value of the variable to the last saved value,
+and updates the text accordingly.
+
+@item Erase Customization
+This sets the variable to its standard value, and updates the text
+accordingly.  This also eliminates any saved value for the variable,
+so that you will get the standard value in future Emacs sessions.
+
+@item Set to Backup Value
+This sets the variable to a previous value that was set in the
+customization buffer in this session.  If you customize a variable
+and then reset it, which discards the customized value,
+you can get the discarded value back again with this operation.
+@end table
+
+@cindex comments on customized settings
+  Sometimes it is useful to record a comment about a specific
+customization.  Use the @samp{Add Comment} item from the
+@samp{[State]} menu to create a field for entering the comment.  The
+comment you enter will be saved, and displayed again if you again view
+the same variable in a customization buffer, even in another session.
+
+  The state of a group indicates whether anything in that group has been
+edited, set or saved.
+
+  Near the top of the customization buffer there are two lines of buttons:
+
+@smallexample
+ [Set for Current Session] [Save for Future Sessions]
+ [Undo Edits] [Reset to Saved] [Erase Customization]   [Finish]
+@end smallexample
+
+@vindex custom-buffer-done-function
+@noindent
+Invoking @samp{[Finish]} either buries or kills this customization
+buffer according to the setting of the option
+@code{custom-buffer-done-kill}; the default is to bury the buffer.
+Each of the other buttons performs an operation---set, save or
+reset---on each of the settings in the buffer that could meaningfully
+be set, saved or reset.  They do not operate on settings whose values
+are hidden, nor on subgroups which are hidden or not visible in the buffer.
+
+@node Saving Customizations
+@subsection Saving Customizations
+
+  Saving customizations from the customization buffer works by writing
+code that future sessions will read, code to set up those
+customizations again.
+
+@vindex custom-file
+  Normally this saves customizations in your init file,
+@file{~/.emacs}.  If you wish, you can save customizations in another
+file instead.  To make this work, your @file{~/.emacs} should set
+@code{custom-file} to the name of that file.  Then you should load the
+file by calling @code{load}.  For example:
+
+@example
+(setq custom-file "~/.emacs-custom.el")
+(load custom-file)
+@end example
+
+  You can use @code{custom-file} to specify different customization
+files for different Emacs versions, like this:
+
+@example
+(cond ((< emacs-major-version 21)
+       ;; @r{Emacs 20 customization.}
+       (setq custom-file "~/.custom-20.el"))
+      ((and (= emacs-major-version 21) (< emacs-minor-version 4))
+       ;; @r{Emacs 21 customization, before version 21.4.}
+       (setq custom-file "~/.custom-21.el"))
+      ((< emacs-major-version 22)
+       ;; @r{Emacs version 21.4 or later.}
+       (setq custom-file "~/.custom-21.4.el"))
+      (t
+       ;; @r{Emacs version 22.1 or later.}
+       (setq custom-file "~/.custom-22.el")))
+
+(load custom-file)
+@end example
+
+  If Emacs was invoked with the @option{-q} or @option{--no-init-file}
+options (@pxref{Initial Options}), it will not let you save your
+customizations in your @file{~/.emacs} init file.  This is because
+saving customizations from such a session would wipe out all the other
+customizations you might have on your init file.
+
+@node Face Customization
+@subsection Customizing Faces
+@cindex customizing faces
+@cindex bold font
+@cindex italic font
+@cindex fonts and faces
+
+  In addition to variables, some customization groups also include
+faces.  When you show the contents of a group, both the variables and
+the faces in the group appear in the customization buffer.  Here is an
+example of how a face looks:
+
+@smallexample
+Custom Changed Face:(sample) [Hide Face]
+   [State]: STANDARD.
+Face used when the customize item has been changed.
+Parent groups: [Custom Magic Faces]
+Attributes: [ ] Font Family: *
+            [ ] Width: *
+            [ ] Height: *
+            [ ] Weight: *
+            [ ] Slant: *
+            [ ] Underline: *
+            [ ] Overline: *
+            [ ] Strike-through: *
+            [ ] Box around text: *
+            [ ] Inverse-video: *
+            [X] Foreground: white       (sample)
+            [X] Background: blue        (sample)
+            [ ] Stipple: *
+            [ ] Inherit: *
+@end smallexample
+
+  Each face attribute has its own line.  The @samp{[@var{x}]} button
+before the attribute name indicates whether the attribute is
+@dfn{enabled}; @samp{[X]} means that it's enabled, and @samp{[ ]}
+means that it's disabled.  You can enable or disable the attribute by
+clicking that button.  When the attribute is enabled, you can change
+the attribute value in the usual ways.
+
+  For the colors, you can specify a color name (use @kbd{M-x
+list-colors-display} for a list of them) or a hexadecimal color
+specification of the form @samp{#@var{rr}@var{gg}@var{bb}}.
+(@samp{#000000} is black, @samp{#ff0000} is red, @samp{#00ff00} is
+green, @samp{#0000ff} is blue, and @samp{#ffffff} is white.)  On a
+black-and-white display, the colors you can use for the background are
+@samp{black}, @samp{white}, @samp{gray}, @samp{gray1}, and
+@samp{gray3}.  Emacs supports these shades of gray by using background
+stipple patterns instead of a color.
+
+  Setting, saving and resetting a face work like the same operations for
+variables (@pxref{Changing a Variable}).
+
+  A face can specify different appearances for different types of
+display.  For example, a face can make text red on a color display, but
+use a bold font on a monochrome display.  To specify multiple
+appearances for a face, select @samp{For All Kinds of Displays} in the
+menu you get from invoking @samp{[State]}.
+
+@findex modify-face
+  Another more basic way to set the attributes of a specific face is
+with @kbd{M-x modify-face}.  This command reads the name of a face, then
+reads the attributes one by one.  For the color and stipple attributes,
+the attribute's current value is the default---type just @key{RET} if
+you don't want to change that attribute.  Type @samp{none} if you want
+to clear out the attribute.
+
+@node Specific Customization
+@subsection Customizing Specific Items
+
+  Instead of finding the setting you want to change by navigating the
+structure of groups, here are other ways to specify the settings that
+you want to customize.
+
+@table @kbd
+@item M-x customize-option @key{RET} @var{option} @key{RET}
+Set up a customization buffer with just one user option variable,
+@var{option}.
+@item M-x customize-face @key{RET} @var{face} @key{RET}
+Set up a customization buffer with just one face, @var{face}.
+@item M-x customize-group @key{RET} @var{group} @key{RET}
+Set up a customization buffer with just one group, @var{group}.
+@item M-x customize-apropos @key{RET} @var{regexp} @key{RET}
+Set up a customization buffer with all the settings and groups that
+match @var{regexp}.
+@item M-x customize-changed @key{RET} @var{version} @key{RET}
+Set up a customization buffer with all the settings and groups
+whose meaning has changed since Emacs version @var{version}.
+@item M-x customize-saved
+Set up a customization buffer containing all settings that you
+have saved with customization buffers.
+@item M-x customize-unsaved
+Set up a customization buffer containing all settings that you have
+set but not saved.
+@end table
+
+@findex customize-option
+  If you want to alter a particular user option with the customization
+buffer, and you know its name, you can use the command @kbd{M-x
+customize-option} and specify the user option (variable) name.  This
+sets up the customization buffer with just one user option---the one
+that you asked for.  Editing, setting and saving the value work as
+described above, but only for the specified user option.  Minibuffer
+completion is handy if you only know part of the name.  However, this
+command can only see options that have been loaded in the current
+Emacs session.
+
+@findex customize-face
+  Likewise, you can modify a specific face, chosen by name, using
+@kbd{M-x customize-face}.  By default it operates on the face used
+on the character after point.
+
+@findex customize-group
+  You can also set up the customization buffer with a specific group,
+using @kbd{M-x customize-group}.  The immediate contents of the chosen
+group, including settings (user options and faces), and other groups,
+all appear as well (even if not already loaded).  However, the
+subgroups' own contents are not included.
+
+@findex customize-apropos
+  For a more general way of controlling what to customize, you can use
+@kbd{M-x customize-apropos}.  You specify a regular expression as
+argument; then all @emph{loaded} settings and groups whose names match
+this regular expression are set up in the customization buffer.  If
+you specify an empty regular expression, this includes @emph{all}
+loaded groups and settings---which takes a long time to set up.
+
+@findex customize-changed
+  When you upgrade to a new Emacs version, you might want to consider
+customizing new settings, and settings whose meanings or default
+values have changed.  To do this, use @kbd{M-x customize-changed} and
+specify a previous Emacs version number using the minibuffer.  It
+creates a customization buffer which shows all the settings and groups
+whose definitions have been changed since the specified version,
+loading them if necessary.
+
+@findex customize-saved
+@findex customize-unsaved
+  If you change settings and then decide the change was a mistake, you
+can use two special commands to revisit your previous changes.  Use
+@kbd{M-x customize-saved} to look at the settings that you have saved.
+Use @kbd{M-x customize-unsaved} to look at the settings that you
+have set but not saved.
+
+@node Custom Themes
+@subsection Customization Themes
+@cindex custom themes
+
+  @dfn{Custom themes} are collections of settings that can be enabled
+or disabled as a unit.  You can use Custom themes to switch quickly
+and easily between various collections of settings, and to transfer
+such collections from one computer to another.
+
+@findex customize-create-theme
+  To define a Custom theme, use @kbd{M-x customize-create-theme},
+which brings up a buffer named @samp{*New Custom Theme*}.  At the top
+of the buffer is an editable field where you can specify the name of
+the theme.  Click on the button labelled @samp{Insert Variable} to add
+a variable to the theme, and click on @samp{Insert Face} to add a
+face.  You can edit these values in the @samp{*New Custom Theme*}
+buffer like in an ordinary Customize buffer.  To remove an option from
+the theme, click on its @samp{State} button and select @samp{Delete}.
+
+@vindex custom-theme-directory
+  After adding the desired options, click on @samp{Save Theme} to save
+the Custom theme.  This writes the theme definition to a file
+@file{@var{foo}-theme.el} (where @var{foo} is the theme name you
+supplied), in the directory @file{~/.emacs.d/}.  You can specify the
+directory by setting @code{custom-theme-directory}.
+
+  You can view and edit the settings of a previously-defined theme by
+clicking on @samp{Visit Theme} and specifying the theme name.  You can
+also import the variables and faces that you have set using Customize
+by visiting the ``special'' theme named @samp{user}.  This theme, which
+records all the options that you set in the ordinary customization
+buffer, is always enabled, and always takes precedence over all other
+enabled Custom themes.  Additionally, the @samp{user} theme is
+recorded with code in your @file{.emacs} file, rather than a
+@file{user-theme.el} file.
+
+@vindex custom-enabled-themes
+  Once you have defined a Custom theme, you can use it by customizing
+the variable @code{custom-enabled-themes}.  This is a list of Custom
+themes that are @dfn{enabled}, or put into effect.  If you set
+@code{custom-enabled-themes} using the Customize interface, the theme
+definitions are automatically loaded from the theme files, if they
+aren't already.  If you save the value of @code{custom-enabled-themes}
+for future Emacs sessions, those Custom themes will be enabled
+whenever Emacs is started up.
+
+  If two enabled themes specify different values for an option, the
+theme occurring earlier in @code{custom-enabled-themes} takes effect.
+
+@findex load-theme
+@findex enable-theme
+@findex disable-theme
+  You can temporarily enable a Custom theme with @kbd{M-x
+enable-theme}.  This prompts for a theme name in the minibuffer, loads
+the theme from the theme file if necessary, and enables the theme.
+You can @dfn{disable} any enabled theme with the command @kbd{M-x
+disable-theme}; this returns the options specified in the theme to
+their original values.  To re-enable the theme, type @kbd{M-x
+enable-theme} again.  If a theme file is changed during your Emacs
+session, you can reload it by typing @kbd{M-x load-theme}.  (This also
+enables the theme.)
+
+@node Variables
+@section Variables
+@cindex variable
+@cindex option, user
+@cindex user option
+
+  A @dfn{variable} is a Lisp symbol which has a value.  The symbol's
+name is also called the name of the variable.  A variable name can
+contain any characters that can appear in a file, but conventionally
+variable names consist of words separated by hyphens.  A variable can
+have a documentation string which describes what kind of value it should
+have and how the value will be used.
+
+  Emacs Lisp allows any variable (with a few exceptions) to have any
+kind of value, but most variables that Emacs uses expect a value of a
+certain type.  Often the value should always be a string, or should
+always be a number.  Sometimes we say that a certain feature is turned
+on if a variable is ``non-@code{nil},'' meaning that if the variable's
+value is @code{nil}, the feature is off, but the feature is on for
+@emph{any} other value.  The conventional value to use to turn on the
+feature---since you have to pick one particular value when you set the
+variable---is @code{t}.
+
+  Emacs uses many Lisp variables for internal record keeping, but the
+most interesting variables for a non-programmer user are those meant
+for users to change---these are called @dfn{user options}.
+
+  Each user option that you can set with the customization buffer is
+in fact a Lisp variable.  Emacs does not (usually) change the values
+of these variables on its own; instead, you set the values in order to
+control the behavior of certain Emacs commands.  Use of the
+customization buffer is explained above (@pxref{Easy Customization});
+here we describe other aspects of Emacs variables.
+
+@menu
+* Examining::	        Examining or setting one variable's value.
+* Hooks::	        Hook variables let you specify programs for parts
+		          of Emacs to run on particular occasions.
+* Locals::	        Per-buffer values of variables.
+* File Variables::      How files can specify variable values.
+@end menu
+
+@node Examining
+@subsection Examining and Setting Variables
+@cindex setting variables
+
+@table @kbd
+@item C-h v @var{var} @key{RET}
+Display the value and documentation of variable @var{var}
+(@code{describe-variable}).
+@item M-x set-variable @key{RET} @var{var} @key{RET} @var{value} @key{RET}
+Change the value of variable @var{var} to @var{value}.
+@end table
+
+  To examine the value of a single variable, use @kbd{C-h v}
+(@code{describe-variable}), which reads a variable name using the
+minibuffer, with completion.  It displays both the value and the
+documentation of the variable.  For example,
+
+@example
+C-h v fill-column @key{RET}
+@end example
+
+@noindent
+displays something like this:
+
+@smallexample
+fill-column is a variable defined in `C source code'.
+fill-column's value is 70
+Local in buffer custom.texi; global value is 70
+Automatically becomes buffer-local when set in any fashion.
+
+This variable is safe to use as a file local variable only if its value
+satisfies the predicate `integerp'.
+
+Documentation:
+*Column beyond which automatic line-wrapping should happen.
+Interactively, you can set the buffer local value using C-x f.
+
+You can customize this variable.
+@end smallexample
+
+@noindent
+The line that says you can customize the variable indicates that this
+variable is a user option.  (The star also indicates this, but it is
+an obsolete indicator that may eventually disappear.)  @kbd{C-h v} is
+not restricted to user options; it allows any variable name.
+
+@findex set-variable
+The most convenient way to set a specific user option variable is with
+@kbd{M-x set-variable}.  This reads the variable name with the
+minibuffer (with completion), and then reads a Lisp expression for the
+new value using the minibuffer a second time (you can insert the old
+value into the minibuffer for editing via @kbd{M-n}).  For example,
+
+@example
+M-x set-variable @key{RET} fill-column @key{RET} 75 @key{RET}
+@end example
+
+@noindent
+sets @code{fill-column} to 75.
+
+ @kbd{M-x set-variable} is limited to user option variables, but you can
+set any variable with a Lisp expression, using the function @code{setq}.
+Here is a @code{setq} expression to set @code{fill-column}:
+
+@example
+(setq fill-column 75)
+@end example
+
+  To execute an expression like this one, go to the @samp{*scratch*}
+buffer, type in the expression, and then type @kbd{C-j}.  @xref{Lisp
+Interaction}.
+
+  Setting variables, like all means of customizing Emacs except where
+otherwise stated, affects only the current Emacs session.  The only
+way to alter the variable in future sessions is to put something in
+the @file{~/.emacs} file to set it those sessions (@pxref{Init File}).
+
+@node Hooks
+@subsection Hooks
+@cindex hook
+@cindex running a hook
+
+  @dfn{Hooks} are an important mechanism for customization of Emacs.  A
+hook is a Lisp variable which holds a list of functions, to be called on
+some well-defined occasion.  (This is called @dfn{running the hook}.)
+The individual functions in the list are called the @dfn{hook functions}
+of the hook.  With rare exceptions, hooks in Emacs are empty when Emacs
+starts up, so the only hook functions in any given hook are the ones you
+explicitly put there as customization.
+
+  Most major modes run one or more @dfn{mode hooks} as the last step of
+initialization.  This makes it easy for you to customize the behavior of
+the mode, by setting up a hook function to override the local variable
+assignments already made by the mode.  But hooks are also used in other
+contexts.  For example, the hook @code{suspend-hook} runs just before
+Emacs suspends itself (@pxref{Exiting}).
+
+@cindex normal hook
+  Most Emacs hooks are @dfn{normal hooks}.  This means that running the
+hook operates by calling all the hook functions, unconditionally, with
+no arguments.  We have made an effort to keep most hooks normal so that
+you can use them in a uniform way.  Every variable in Emacs whose name
+ends in @samp{-hook} is a normal hook.
+
+@cindex abnormal hook
+  There are also a few @dfn{abnormal hooks}.  These variables' names end
+in @samp{-hooks} or @samp{-functions}, instead of @samp{-hook}.  What
+makes these hooks abnormal is that there is something peculiar about the
+way its functions are called---perhaps they are given arguments, or
+perhaps the values they return are used in some way.  For example,
+@code{find-file-not-found-functions} (@pxref{Visiting}) is abnormal because
+as soon as one hook function returns a non-@code{nil} value, the rest
+are not called at all.  The documentation of each abnormal hook variable
+explains in detail what is peculiar about it.
+
+@findex add-hook
+  You can set a hook variable with @code{setq} like any other Lisp
+variable, but the recommended way to add a hook function to a hook
+(either normal or abnormal) is by calling @code{add-hook}.
+@xref{Hooks,,, elisp, The Emacs Lisp Reference Manual}.
+
+  For example, here's how to set up a hook to turn on Auto Fill mode
+when entering Text mode and other modes based on Text mode:
+
+@example
+(add-hook 'text-mode-hook 'turn-on-auto-fill)
+@end example
+
+  The next example shows how to use a hook to customize the indentation
+of C code.  (People often have strong personal preferences for one
+format compared to another.)  Here the hook function is an anonymous
+lambda expression.
+
+@example
+@group
+(setq my-c-style
+  '((c-comment-only-line-offset . 4)
+@end group
+@group
+    (c-cleanup-list . (scope-operator
+		       empty-defun-braces
+		       defun-close-semi))
+@end group
+@group
+    (c-offsets-alist . ((arglist-close . c-lineup-arglist)
+			(substatement-open . 0)))))
+@end group
+
+@group
+(add-hook 'c-mode-common-hook
+  '(lambda ()
+     (c-add-style "my-style" my-c-style t)))
+@end group
+@end example
+
+  It is best to design your hook functions so that the order in which
+they are executed does not matter.  Any dependence on the order is
+``asking for trouble.''  However, the order is predictable: the most
+recently added hook functions are executed first.
+
+@findex remove-hook
+  If you play with adding various different versions of a hook
+function by calling @code{add-hook} over and over, remember that all
+the versions you added will remain in the hook variable together.  You
+can clear out individual functions by calling @code{remove-hook}, or
+do @code{(setq @var{hook-variable} nil)} to remove everything.
+
+@node Locals
+@subsection Local Variables
+
+@table @kbd
+@item M-x make-local-variable @key{RET} @var{var} @key{RET}
+Make variable @var{var} have a local value in the current buffer.
+@item M-x kill-local-variable @key{RET} @var{var} @key{RET}
+Make variable @var{var} use its global value in the current buffer.
+@item M-x make-variable-buffer-local @key{RET} @var{var} @key{RET}
+Mark variable @var{var} so that setting it will make it local to the
+buffer that is current at that time.
+@end table
+
+@cindex local variables
+  Almost any variable can be made @dfn{local} to a specific Emacs
+buffer.  This means that its value in that buffer is independent of its
+value in other buffers.  A few variables are always local in every
+buffer.  Every other Emacs variable has a @dfn{global} value which is in
+effect in all buffers that have not made the variable local.
+
+@findex make-local-variable
+  @kbd{M-x make-local-variable} reads the name of a variable and makes
+it local to the current buffer.  Changing its value subsequently in
+this buffer will not affect others, and changes in its global value
+will not affect this buffer.
+
+@findex make-variable-buffer-local
+@cindex per-buffer variables
+  @kbd{M-x make-variable-buffer-local} marks a variable so it will
+become local automatically whenever it is set.  More precisely, once a
+variable has been marked in this way, the usual ways of setting the
+variable automatically do @code{make-local-variable} first.  We call
+such variables @dfn{per-buffer} variables.  Many variables in Emacs
+are normally per-buffer; the variable's document string tells you when
+this is so.  A per-buffer variable's global value is normally never
+effective in any buffer, but it still has a meaning: it is the initial
+value of the variable for each new buffer.
+
+  Major modes (@pxref{Major Modes}) always make variables local to the
+buffer before setting the variables.  This is why changing major modes
+in one buffer has no effect on other buffers.  Minor modes also work
+by setting variables---normally, each minor mode has one controlling
+variable which is non-@code{nil} when the mode is enabled
+(@pxref{Minor Modes}).  For many minor modes, the controlling variable
+is per buffer, and thus always buffer-local.  Otherwise, you can make
+it local in a specific buffer like any other variable.
+
+  A few variables cannot be local to a buffer because they are always
+local to each display instead (@pxref{Multiple Displays}).  If you try to
+make one of these variables buffer-local, you'll get an error message.
+
+@findex kill-local-variable
+  @kbd{M-x kill-local-variable} makes a specified variable cease to be
+local to the current buffer.  The global value of the variable
+henceforth is in effect in this buffer.  Setting the major mode kills
+all the local variables of the buffer except for a few variables
+specially marked as @dfn{permanent locals}.
+
+@findex setq-default
+  To set the global value of a variable, regardless of whether the
+variable has a local value in the current buffer, you can use the Lisp
+construct @code{setq-default}.  This construct is used just like
+@code{setq}, but it sets variables' global values instead of their local
+values (if any).  When the current buffer does have a local value, the
+new global value may not be visible until you switch to another buffer.
+Here is an example:
+
+@example
+(setq-default fill-column 75)
+@end example
+
+@noindent
+@code{setq-default} is the only way to set the global value of a variable
+that has been marked with @code{make-variable-buffer-local}.
+
+@findex default-value
+  Lisp programs can use @code{default-value} to look at a variable's
+default value.  This function takes a symbol as argument and returns its
+default value.  The argument is evaluated; usually you must quote it
+explicitly.  For example, here's how to obtain the default value of
+@code{fill-column}:
+
+@example
+(default-value 'fill-column)
+@end example
+
+@node File Variables
+@subsection Local Variables in Files
+@cindex local variables in files
+@cindex file local variables
+
+  A file can specify local variable values for use when you edit the
+file with Emacs.  Visiting the file checks for local variable
+specifications; it automatically makes these variables local to the
+buffer, and sets them to the values specified in the file.
+
+@menu
+* Specifying File Variables:: Specifying file local variables.
+* Safe File Variables::       Making sure file local variables are safe.
+@end menu
+
+@node Specifying File Variables
+@subsubsection Specifying File Variables
+
+  There are two ways to specify file local variable values: in the first
+line, or with a local variables list.  Here's how to specify them in the
+first line:
+
+@example
+-*- mode: @var{modename}; @var{var}: @var{value}; @dots{} -*-
+@end example
+
+@noindent
+You can specify any number of variables/value pairs in this way, each
+pair with a colon and semicolon as shown above.  @code{mode:
+@var{modename};} specifies the major mode; this should come first in the
+line.  The @var{value}s are not evaluated; they are used literally.
+Here is an example that specifies Lisp mode and sets two variables with
+numeric values:
+
+@smallexample
+;; -*- mode: Lisp; fill-column: 75; comment-column: 50; -*-
+@end smallexample
+
+  You can also specify the coding system for a file in this way: just
+specify a value for the ``variable'' named @code{coding}.  The ``value''
+must be a coding system name that Emacs recognizes.  @xref{Coding
+Systems}.  @w{@samp{unibyte: t}} specifies unibyte loading for a
+particular Lisp file.  @xref{Enabling Multibyte}.
+
+  The @code{eval} pseudo-variable, described below, can be specified in
+the first line as well.
+
+@cindex shell scripts, and local file variables
+  In shell scripts, the first line is used to identify the script
+interpreter, so you cannot put any local variables there.  To
+accommodate this, Emacs looks for local variable specifications in the
+@emph{second} line when the first line specifies an interpreter.
+
+  A @dfn{local variables list} goes near the end of the file, in the
+last page.  (It is often best to put it on a page by itself.)  The local
+variables list starts with a line containing the string @samp{Local
+Variables:}, and ends with a line containing the string @samp{End:}.  In
+between come the variable names and values, one set per line, as
+@samp{@var{variable}:@: @var{value}}.  The @var{value}s are not
+evaluated; they are used literally.  If a file has both a local
+variables list and a @samp{-*-} line, Emacs processes @emph{everything}
+in the @samp{-*-} line first, and @emph{everything} in the local
+variables list afterward.
+
+  Here is an example of a local variables list:
+
+@example
+;; Local Variables: **
+;; mode:lisp **
+;; comment-column:0 **
+;; comment-start: ";; "  **
+;; comment-end:"**" **
+;; End: **
+@end example
+
+  Each line starts with the prefix @samp{;; } and each line ends with
+the suffix @samp{ **}.  Emacs recognizes these as the prefix and
+suffix based on the first line of the list, by finding them
+surrounding the magic string @samp{Local Variables:}; then it
+automatically discards them from the other lines of the list.
+
+  The usual reason for using a prefix and/or suffix is to embed the
+local variables list in a comment, so it won't confuse other programs
+that the file is intended as input for.  The example above is for a
+language where comment lines start with @samp{;; } and end with
+@samp{**}; the local values for @code{comment-start} and
+@code{comment-end} customize the rest of Emacs for this unusual
+syntax.  Don't use a prefix (or a suffix) if you don't need one.
+
+  If you write a multi-line string value, you should put the prefix
+and suffix on each line, even lines that start or end within the
+string.  They will be stripped off for processing the list.  If you
+want to split a long string across multiple lines of the file, you can
+use backslash-newline, which is ignored in Lisp string constants.
+Here's an example of doing this:
+
+@example
+# Local Variables:
+# compile-command: "cc foo.c -Dfoo=bar -Dhack=whatever \
+#   -Dmumble=blaah"
+# End:
+@end example
+
+  Some ``variable names'' have special meanings in a local variables
+list.  Specifying the ``variable'' @code{mode} really sets the major
+mode, while any value specified for the ``variable'' @code{eval} is
+simply evaluated as an expression (its value is ignored).  A value for
+@code{coding} specifies the coding system for character code
+conversion of this file, and a value of @code{t} for @code{unibyte}
+says to visit the file in a unibyte buffer.  These four ``variables''
+are not really variables; setting them in any other context has no
+special meaning.
+
+  @emph{If @code{mode} is used to set a major mode, it should be the
+first ``variable'' in the list.}  Otherwise, the entries that precede
+it will usually be ignored, since most modes kill all local variables
+as part of their initialization.
+
+  You can use the @code{mode} ``variable'' to set minor modes as well
+as the major modes; in fact, you can use it more than once, first to
+set the major mode and then to set minor modes which are specific to
+particular buffers.  But most minor modes should not be specified in
+the file at all, because they represent user preferences.
+
+  For example, you may be tempted to try to turn on Auto Fill mode with
+a local variable list.  That is a mistake.  The choice of Auto Fill mode
+or not is a matter of individual taste, not a matter of the contents of
+particular files.  If you want to use Auto Fill, set up major mode hooks
+with your @file{.emacs} file to turn it on (when appropriate) for you
+alone (@pxref{Init File}).  Don't use a local variable list to impose
+your taste on everyone.
+
+  The start of the local variables list must be no more than 3000
+characters from the end of the file, and must be in the last page if the
+file is divided into pages.  Otherwise, Emacs will not notice it is
+there.  The purpose of this rule is so that a stray @samp{Local
+Variables:}@: not in the last page does not confuse Emacs, and so that
+visiting a long file that is all one page and has no local variables
+list need not take the time to search the whole file.
+
+  Use the command @code{normal-mode} to reset the local variables and
+major mode of a buffer according to the file name and contents,
+including the local variables list if any.  @xref{Choosing Modes}.
+
+@node Safe File Variables
+@subsubsection Safety of File Variables
+
+  File-local variables can be dangerous; when you visit someone else's
+file, there's no telling what its local variables list could do to
+your Emacs.  Improper values of the @code{eval} ``variable,'' and
+other variables such as @code{load-path}, could execute Lisp code you
+didn't intend to run.
+
+  Therefore, whenever Emacs encounters file local variable values that
+are not known to be safe, it displays the file's entire local
+variables list, and asks you for confirmation before setting them.
+You can type @kbd{y} or @key{SPC} to put the local variables list into
+effect, or @kbd{n} to ignore it.  When Emacs is run in batch mode
+(@pxref{Initial Options}), it can't really ask you, so it assumes the
+answer @kbd{n}.
+
+  Emacs normally recognizes certain variables/value pairs as safe.
+For instance, it is safe to give @code{comment-column} or
+@code{fill-column} any integer value.  If a file specifies only
+known-safe variable/value pairs, Emacs does not ask for confirmation
+before setting them.  Otherwise, you can tell Emacs to record all the
+variable/value pairs in this file as safe, by typing @kbd{!} at the
+confirmation prompt.  When Emacs encounters these variable/value pairs
+subsequently, in the same file or others, it will assume they are
+safe.
+
+@vindex safe-local-variable-values
+@cindex risky variable
+  Some variables, such as @code{load-path}, are considered
+particularly @dfn{risky}: there is seldom any reason to specify them
+as local variables, and changing them can be dangerous.  If a file
+contains only risky local variables, Emacs neither offers nor accepts
+@kbd{!} as input at the confirmation prompt.  If some of the local
+variables in a file are risky, and some are only potentially unsafe, you
+can enter @kbd{!} at the prompt.  It applies all the variables, but only
+marks the non-risky ones as safe for the future.  If you really want to
+record safe values for risky variables, do it directly by customizing
+@samp{safe-local-variable-values} (@pxref{Easy Customization}).
+
+@vindex enable-local-variables
+  The variable @code{enable-local-variables} allows you to change the
+way Emacs processes local variables.  Its default value is @code{t},
+which specifies the behavior described above.  If it is @code{nil},
+Emacs simply ignores all file local variables.  @code{:safe} means use
+only the safe values and ignore the rest.  Any other value says to
+query you about each file that has local variables, without trying to
+determine whether the values are known to be safe.
+
+@vindex enable-local-eval
+  The variable @code{enable-local-eval} controls whether Emacs
+processes @code{eval} variables.  The three possibilities for the
+variable's value are @code{t}, @code{nil}, and anything else, just as
+for @code{enable-local-variables}.  The default is @code{maybe}, which
+is neither @code{t} nor @code{nil}, so normally Emacs does ask for
+confirmation about processing @code{eval} variables.
+
+@vindex safe-local-eval-forms
+  But there is an exception.  The @code{safe-local-eval-forms} is a
+customizable list of eval forms which are safe.  Emacs does not ask
+for confirmation when it finds these forms for the @code{eval}
+variable.
+
+@node Key Bindings
+@section Customizing Key Bindings
+@cindex key bindings
+
+  This section describes @dfn{key bindings}, which map keys to commands,
+and @dfn{keymaps}, which record key bindings.  It also explains how
+to customize key bindings.
+
+  Recall that a command is a Lisp function whose definition provides for
+interactive use.  Like every Lisp function, a command has a function
+name, which usually consists of lower-case letters and hyphens.
+
+@menu
+* Keymaps::             Generalities.  The global keymap.
+* Prefix Keymaps::      Keymaps for prefix keys.
+* Local Keymaps::       Major and minor modes have their own keymaps.
+* Minibuffer Maps::     The minibuffer uses its own local keymaps.
+* Rebinding::           How to redefine one key's meaning conveniently.
+* Init Rebinding::      Rebinding keys with your init file, @file{.emacs}.
+* Function Keys::       Rebinding terminal function keys.
+* Named ASCII Chars::   Distinguishing @key{TAB} from @kbd{C-i}, and so on.
+* Mouse Buttons::       Rebinding mouse buttons in Emacs.
+* Disabling::           Disabling a command means confirmation is required
+                          before it can be executed.  This is done to protect
+                          beginners from surprises.
+@end menu
+
+@node Keymaps
+@subsection Keymaps
+@cindex keymap
+
+  The bindings between key sequences and command functions are recorded
+in data structures called @dfn{keymaps}.  Emacs has many of these, each
+used on particular occasions.
+
+  Recall that a @dfn{key sequence} (@dfn{key}, for short) is a sequence
+of @dfn{input events} that have a meaning as a unit.  Input events
+include characters, function keys and mouse buttons---all the inputs
+that you can send to the computer with your terminal.  A key sequence
+gets its meaning from its @dfn{binding}, which says what command it
+runs.  The function of keymaps is to record these bindings.
+
+@cindex global keymap
+  The @dfn{global} keymap is the most important keymap because it is
+always in effect.  The global keymap defines keys for Fundamental mode;
+most of these definitions are common to most or all major modes.  Each
+major or minor mode can have its own keymap which overrides the global
+definitions of some keys.
+
+  For example, a self-inserting character such as @kbd{g} is
+self-inserting because the global keymap binds it to the command
+@code{self-insert-command}.  The standard Emacs editing characters such
+as @kbd{C-a} also get their standard meanings from the global keymap.
+Commands to rebind keys, such as @kbd{M-x global-set-key}, actually work
+by storing the new binding in the proper place in the global map.
+@xref{Rebinding}.
+
+   Meta characters work differently; Emacs translates each Meta
+character into a pair of characters starting with @key{ESC}.  When you
+type the character @kbd{M-a} in a key sequence, Emacs replaces it with
+@kbd{@key{ESC} a}.  A meta key comes in as a single input event, but
+becomes two events for purposes of key bindings.  The reason for this is
+historical, and we might change it someday.
+
+@cindex function key
+  Most modern keyboards have function keys as well as character keys.
+Function keys send input events just as character keys do, and keymaps
+can have bindings for them.
+
+  On text terminals, typing a function key actually sends the computer a
+sequence of characters; the precise details of the sequence depends on
+which function key and on the model of terminal you are using.  (Often
+the sequence starts with @kbd{@key{ESC} [}.)  If Emacs understands your
+terminal type properly, it recognizes the character sequences forming
+function keys wherever they occur in a key sequence (not just at the
+beginning).  Thus, for most purposes, you can pretend the function keys
+reach Emacs directly and ignore their encoding as character sequences.
+
+@cindex mouse
+  Mouse buttons also produce input events.  These events come with other
+data---the window and position where you pressed or released the button,
+and a time stamp.  But only the choice of button matters for key
+bindings; the other data matters only if a command looks at it.
+(Commands designed for mouse invocation usually do look at the other
+data.)
+
+  A keymap records definitions for single events.  Interpreting a key
+sequence of multiple events involves a chain of keymaps.  The first
+keymap gives a definition for the first event; this definition is
+another keymap, which is used to look up the second event in the
+sequence, and so on.
+
+  Key sequences can mix function keys and characters.  For example,
+@kbd{C-x @key{SELECT}} is meaningful.  If you make @key{SELECT} a prefix
+key, then @kbd{@key{SELECT} C-n} makes sense.  You can even mix mouse
+events with keyboard events, but we recommend against it, because such
+key sequences are inconvenient to use.
+
+  As a user, you can redefine any key; but it is usually best to stick
+to key sequences that consist of @kbd{C-c} followed by a letter (upper
+or lower case).  These keys are ``reserved for users,'' so they won't
+conflict with any properly designed Emacs extension.  The function
+keys @key{F5} through @key{F9} are also reserved for users.  If you
+redefine some other key, your definition may be overridden by certain
+extensions or major modes which redefine the same key.
+
+@node Prefix Keymaps
+@subsection Prefix Keymaps
+
+  A prefix key such as @kbd{C-x} or @key{ESC} has its own keymap,
+which holds the definition for the event that immediately follows
+that prefix.
+
+  The definition of a prefix key is usually the keymap to use for
+looking up the following event.  The definition can also be a Lisp
+symbol whose function definition is the following keymap; the effect is
+the same, but it provides a command name for the prefix key that can be
+used as a description of what the prefix key is for.  Thus, the binding
+of @kbd{C-x} is the symbol @code{Control-X-prefix}, whose function
+definition is the keymap for @kbd{C-x} commands.  The definitions of
+@kbd{C-c}, @kbd{C-x}, @kbd{C-h} and @key{ESC} as prefix keys appear in
+the global map, so these prefix keys are always available.
+
+  Aside from ordinary prefix keys, there is a fictitious ``prefix key''
+which represents the menu bar; see @ref{Menu Bar,,,elisp, The Emacs Lisp
+Reference Manual}, for special information about menu bar key bindings.
+Mouse button events that invoke pop-up menus are also prefix keys; see
+@ref{Menu Keymaps,,,elisp, The Emacs Lisp Reference Manual}, for more
+details.
+
+  Some prefix keymaps are stored in variables with names:
+
+@itemize @bullet
+@item
+@vindex ctl-x-map
+@code{ctl-x-map} is the variable name for the map used for characters that
+follow @kbd{C-x}.
+@item
+@vindex help-map
+@code{help-map} is for characters that follow @kbd{C-h}.
+@item
+@vindex esc-map
+@code{esc-map} is for characters that follow @key{ESC}.  Thus, all Meta
+characters are actually defined by this map.
+@item
+@vindex ctl-x-4-map
+@code{ctl-x-4-map} is for characters that follow @kbd{C-x 4}.
+@item
+@vindex mode-specific-map
+@code{mode-specific-map} is for characters that follow @kbd{C-c}.
+@end itemize
+
+@node Local Keymaps
+@subsection Local Keymaps
+
+@cindex local keymap
+  So far we have explained the ins and outs of the global map.  Major
+modes customize Emacs by providing their own key bindings in @dfn{local
+keymaps}.  For example, C mode overrides @key{TAB} to make it indent the
+current line for C code.  Portions of text in the buffer can specify
+their own keymaps to substitute for the keymap of the buffer's major
+mode.
+
+@cindex minor mode keymap
+  Minor modes can also have local keymaps.  Whenever a minor mode is
+in effect, the definitions in its keymap override both the major
+mode's local keymap and the global keymap.
+
+  A local keymap can locally redefine a key as a prefix key by defining
+it as a prefix keymap.  If the key is also defined globally as a prefix,
+then its local and global definitions (both keymaps) effectively
+combine: both of them are used to look up the event that follows the
+prefix key.  Thus, if the mode's local keymap defines @kbd{C-c} as
+another keymap, and that keymap defines @kbd{C-z} as a command, this
+provides a local meaning for @kbd{C-c C-z}.  This does not affect other
+sequences that start with @kbd{C-c}; if those sequences don't have their
+own local bindings, their global bindings remain in effect.
+
+  Another way to think of this is that Emacs handles a multi-event key
+sequence by looking in several keymaps, one by one, for a binding of the
+whole key sequence.  First it checks the minor mode keymaps for minor
+modes that are enabled, then it checks the major mode's keymap, and then
+it checks the global keymap.  This is not precisely how key lookup
+works, but it's good enough for understanding the results in ordinary
+circumstances.
+
+@cindex rebinding major mode keys
+  Most major modes construct their keymaps when the mode is used for
+the first time in a session.  If you wish to change one of these
+keymaps, you must use the major mode's @dfn{mode hook}
+(@pxref{Hooks}).
+
+@findex define-key
+  For example, the command @code{texinfo-mode} to select Texinfo mode
+runs the hook @code{texinfo-mode-hook}.  Here's how you can use the hook
+to add local bindings (not very useful, we admit) for @kbd{C-c n} and
+@kbd{C-c p} in Texinfo mode:
+
+@example
+(add-hook 'texinfo-mode-hook
+          '(lambda ()
+             (define-key texinfo-mode-map "\C-cp"
+                         'backward-paragraph)
+             (define-key texinfo-mode-map "\C-cn"
+                         'forward-paragraph)))
+@end example
+
+@node Minibuffer Maps
+@subsection Minibuffer Keymaps
+
+@cindex minibuffer keymaps
+@vindex minibuffer-local-map
+@vindex minibuffer-local-ns-map
+@vindex minibuffer-local-completion-map
+@vindex minibuffer-local-must-match-map
+@vindex minibuffer-local-filename-completion-map
+@vindex minibuffer-local-must-match-filename-map
+  The minibuffer has its own set of local keymaps; they contain various
+completion and exit commands.
+
+@itemize @bullet
+@item
+@code{minibuffer-local-map} is used for ordinary input (no completion).
+@item
+@code{minibuffer-local-ns-map} is similar, except that @key{SPC} exits
+just like @key{RET}.  This is used mainly for Mocklisp compatibility.
+@item
+@code{minibuffer-local-completion-map} is for permissive completion.
+@item
+@code{minibuffer-local-must-match-map} is for strict completion and
+for cautious completion.
+@item
+Finally, @code{minibuffer-local-filename-completion-map} and
+@code{minibuffer-local-must-match-filename-map} are like the two
+previous ones, but they are specifically for file name completion.
+They do not bind @key{SPC}.
+@end itemize
+
+@node Rebinding
+@subsection Changing Key Bindings Interactively
+@cindex key rebinding, this session
+@cindex redefining keys, this session
+
+  The way to redefine an Emacs key is to change its entry in a keymap.
+You can change the global keymap, in which case the change is effective in
+all major modes (except those that have their own overriding local
+definitions for the same key).  Or you can change the current buffer's
+local map, which affects all buffers using the same major mode.
+
+@findex global-set-key
+@findex local-set-key
+@findex global-unset-key
+@findex local-unset-key
+@table @kbd
+@item M-x global-set-key @key{RET} @var{key} @var{cmd} @key{RET}
+Define @var{key} globally to run @var{cmd}.
+@item M-x local-set-key @key{RET} @var{key} @var{cmd} @key{RET}
+Define @var{key} locally (in the major mode now in effect) to run
+@var{cmd}.
+@item M-x global-unset-key @key{RET} @var{key}
+Make @var{key} undefined in the global map.
+@item M-x local-unset-key @key{RET} @var{key}
+Make @var{key} undefined locally (in the major mode now in effect).
+@end table
+
+  For example, suppose you like to execute commands in a subshell within
+an Emacs buffer, instead of suspending Emacs and executing commands in
+your login shell.  Normally, @kbd{C-z} is bound to the function
+@code{suspend-emacs} (when not using the X Window System), but you can
+change @kbd{C-z} to invoke an interactive subshell within Emacs, by
+binding it to @code{shell} as follows:
+
+@example
+M-x global-set-key @key{RET} C-z shell @key{RET}
+@end example
+
+@noindent
+@code{global-set-key} reads the command name after the key.   After you
+press the key, a message like this appears so that you can confirm that
+you are binding the key you want:
+
+@example
+Set key C-z to command:
+@end example
+
+  You can redefine function keys and mouse events in the same way; just
+type the function key or click the mouse when it's time to specify the
+key to rebind.
+
+  You can rebind a key that contains more than one event in the same
+way.  Emacs keeps reading the key to rebind until it is a complete key
+(that is, not a prefix key).  Thus, if you type @kbd{C-f} for
+@var{key}, that's the end; it enters the minibuffer immediately to
+read @var{cmd}.  But if you type @kbd{C-x}, since that's a prefix, it
+reads another character; if that is @kbd{4}, another prefix character,
+it reads one more character, and so on.  For example,
+
+@example
+M-x global-set-key @key{RET} C-x 4 $ spell-other-window @key{RET}
+@end example
+
+@noindent
+redefines @kbd{C-x 4 $} to run the (fictitious) command
+@code{spell-other-window}.
+
+  The two-character keys consisting of @kbd{C-c} followed by a letter
+are reserved for user customizations.  Lisp programs are not supposed to
+define these keys, so the bindings you make for them will be available
+in all major modes and will never get in the way of anything.
+
+  You can remove the global definition of a key with
+@code{global-unset-key}.  This makes the key @dfn{undefined}; if you
+type it, Emacs will just beep.  Similarly, @code{local-unset-key} makes
+a key undefined in the current major mode keymap, which makes the global
+definition (or lack of one) come back into effect in that major mode.
+
+  If you have redefined (or undefined) a key and you subsequently wish
+to retract the change, undefining the key will not do the job---you need
+to redefine the key with its standard definition.  To find the name of
+the standard definition of a key, go to a Fundamental mode buffer in a
+fresh Emacs and use @kbd{C-h c}.  The documentation of keys in this
+manual also lists their command names.
+
+  If you want to prevent yourself from invoking a command by mistake, it
+is better to disable the command than to undefine the key.  A disabled
+command is less work to invoke when you really want to.
+@xref{Disabling}.
+
+@node Init Rebinding
+@subsection Rebinding Keys in Your Init File
+
+  If you have a set of key bindings that you like to use all the time,
+you can specify them in your @file{.emacs} file by using their Lisp
+syntax.  (@xref{Init File}.)
+
+  The simplest method for doing this works for @acronym{ASCII} characters and
+Meta-modified @acronym{ASCII} characters only.  This method uses a string to
+represent the key sequence you want to rebind.  For example, here's how
+to bind @kbd{C-z} to @code{shell}:
+
+@example
+(global-set-key "\C-z" 'shell)
+@end example
+
+@noindent
+This example uses a string constant containing one character,
+@kbd{C-z}.  (@samp{\C-} is string syntax for a control character.)  The
+single-quote before the command name, @code{shell}, marks it as a
+constant symbol rather than a variable.  If you omit the quote, Emacs
+would try to evaluate @code{shell} immediately as a variable.  This
+probably causes an error; it certainly isn't what you want.
+
+  Here is another example that binds the key sequence @kbd{C-x M-l}:
+
+@example
+(global-set-key "\C-x\M-l" 'make-symbolic-link)
+@end example
+
+  To put @key{TAB}, @key{RET}, @key{ESC}, or @key{DEL} in the
+string, you can use the Emacs Lisp escape sequences, @samp{\t},
+@samp{\r}, @samp{\e}, and @samp{\d}.  Here is an example which binds
+@kbd{C-x @key{TAB}}:
+
+@example
+(global-set-key "\C-x\t" 'indent-rigidly)
+@end example
+
+  These examples show how to write some other special @acronym{ASCII} characters
+in strings for key bindings:
+
+@example
+(global-set-key "\r" 'newline)               ;; @key{RET}
+(global-set-key "\d" 'delete-backward-char)  ;; @key{DEL}
+(global-set-key "\C-x\e\e" 'repeat-complex-command)  ;; @key{ESC}
+@end example
+
+  When the key sequence includes function keys or mouse button events,
+or non-@acronym{ASCII} characters such as @code{C-=} or @code{H-a}, you must use
+the more general method of rebinding, which uses a vector to specify the
+key sequence.
+
+  The way to write a vector in Emacs Lisp is with square brackets around
+the vector elements.  Use spaces to separate the elements.  If an
+element is a symbol, simply write the symbol's name---no other
+delimiters or punctuation are needed.  If a vector element is a
+character, write it as a Lisp character constant: @samp{?} followed by
+the character as it would appear in a string.
+
+  Here are examples of using vectors to rebind @kbd{C-=} (a control
+character not in @acronym{ASCII}), @kbd{C-M-=} (not in @acronym{ASCII} because @kbd{C-=}
+is not), @kbd{H-a} (a Hyper character; @acronym{ASCII} doesn't have Hyper at
+all), @key{F7} (a function key), and @kbd{C-Mouse-1} (a
+keyboard-modified mouse button):
+
+@example
+(global-set-key [?\C-=] 'make-symbolic-link)
+(global-set-key [?\M-\C-=] 'make-symbolic-link)
+(global-set-key [?\H-a] 'make-symbolic-link)
+(global-set-key [f7] 'make-symbolic-link)
+(global-set-key [C-mouse-1] 'make-symbolic-link)
+@end example
+
+  You can use a vector for the simple cases too.  Here's how to
+rewrite the first six examples above to use vectors:
+
+@example
+(global-set-key [?\C-z] 'shell)
+(global-set-key [?\C-x ?l] 'make-symbolic-link)
+(global-set-key [?\C-x ?\t] 'indent-rigidly)
+(global-set-key [?\r] 'newline)
+(global-set-key [?\d] 'delete-backward-char)
+(global-set-key [?\C-x ?\e ?\e] 'repeat-complex-command)
+@end example
+
+@noindent
+As you see, you represent a multi-character key sequence with a vector
+by listing all of the characters, in order, within the square brackets
+that delimit the vector.
+
+  Language and coding systems can cause problems with key bindings
+for non-@acronym{ASCII} characters.  @xref{Init Non-ASCII}.
+
+@node Function Keys
+@subsection Rebinding Function Keys
+
+  Key sequences can contain function keys as well as ordinary
+characters.  Just as Lisp characters (actually integers) represent
+keyboard characters, Lisp symbols represent function keys.  If the
+function key has a word as its label, then that word is also the name of
+the corresponding Lisp symbol.  Here are the conventional Lisp names for
+common function keys:
+
+@table @asis
+@item @code{left}, @code{up}, @code{right}, @code{down}
+Cursor arrow keys.
+
+@item @code{begin}, @code{end}, @code{home}, @code{next}, @code{prior}
+Other cursor repositioning keys.
+
+@item @code{select}, @code{print}, @code{execute}, @code{backtab}
+@itemx @code{insert}, @code{undo}, @code{redo}, @code{clearline}
+@itemx @code{insertline}, @code{deleteline}, @code{insertchar}, @code{deletechar}
+Miscellaneous function keys.
+
+@item @code{f1}, @code{f2}, @dots{} @code{f35}
+Numbered function keys (across the top of the keyboard).
+
+@item @code{kp-add}, @code{kp-subtract}, @code{kp-multiply}, @code{kp-divide}
+@itemx @code{kp-backtab}, @code{kp-space}, @code{kp-tab}, @code{kp-enter}
+@itemx @code{kp-separator}, @code{kp-decimal}, @code{kp-equal}
+Keypad keys (to the right of the regular keyboard), with names or punctuation.
+
+@item @code{kp-0}, @code{kp-1}, @dots{} @code{kp-9}
+Keypad keys with digits.
+
+@item @code{kp-f1}, @code{kp-f2}, @code{kp-f3}, @code{kp-f4}
+Keypad PF keys.
+@end table
+
+  These names are conventional, but some systems (especially when using
+X) may use different names.  To make certain what symbol is used for a
+given function key on your terminal, type @kbd{C-h c} followed by that
+key.
+
+  A key sequence which contains function key symbols (or anything but
+@acronym{ASCII} characters) must be a vector rather than a string.
+Thus, to bind function key @samp{f1} to the command @code{rmail},
+write the following:
+
+@example
+(global-set-key [f1] 'rmail)
+@end example
+
+@noindent
+To bind the right-arrow key to the command @code{forward-char}, you can
+use this expression:
+
+@example
+(global-set-key [right] 'forward-char)
+@end example
+
+@noindent
+This uses the Lisp syntax for a vector containing the symbol
+@code{right}.  (This binding is present in Emacs by default.)
+
+  @xref{Init Rebinding}, for more information about using vectors for
+rebinding.
+
+  You can mix function keys and characters in a key sequence.  This
+example binds @kbd{C-x @key{NEXT}} to the command @code{forward-page}.
+
+@example
+(global-set-key [?\C-x next] 'forward-page)
+@end example
+
+@noindent
+where @code{?\C-x} is the Lisp character constant for the character
+@kbd{C-x}.  The vector element @code{next} is a symbol and therefore
+does not take a question mark.
+
+  You can use the modifier keys @key{CTRL}, @key{META}, @key{HYPER},
+@key{SUPER}, @key{ALT} and @key{SHIFT} with function keys.  To represent
+these modifiers, add the strings @samp{C-}, @samp{M-}, @samp{H-},
+@samp{s-}, @samp{A-} and @samp{S-} at the front of the symbol name.
+Thus, here is how to make @kbd{Hyper-Meta-@key{RIGHT}} move forward a
+word:
+
+@example
+(global-set-key [H-M-right] 'forward-word)
+@end example
+
+@cindex keypad
+  Many keyboards have a ``numeric keypad'' on the right hand side.
+The numeric keys in the keypad double up as cursor motion keys,
+toggled by a key labeled @samp{Num Lock}.  By default, Emacs
+translates these keys to the corresponding keys in the main keyboard.
+For example, when @samp{Num Lock} is on, the key labeled @samp{8} on
+the numeric keypad produces @code{kp-8}, which is translated to
+@kbd{8}; when @samp{Num Lock} is off, the same key produces
+@code{kp-up}, which is translated to @key{UP}.  If you rebind a key
+such as @kbd{8} or @key{UP}, it affects the equivalent keypad key too.
+However, if you rebind a @samp{kp-} key directly, that won't affect
+its non-keypad equivalent.
+
+  Emacs provides a convenient method for binding the numeric keypad
+keys, using the variables @code{keypad-setup},
+@code{keypad-numlock-setup}, @code{keypad-shifted-setup}, and
+@code{keypad-numlock-shifted-setup}.  These can be found in the
+@samp{keyboard} customization group (@pxref{Easy Customization}).  You
+can rebind the keys to perform other tasks, such as issuing numeric
+prefix arguments.
+
+@node Named ASCII Chars
+@subsection Named @acronym{ASCII} Control Characters
+
+  @key{TAB}, @key{RET}, @key{BS}, @key{LFD}, @key{ESC} and @key{DEL}
+started out as names for certain @acronym{ASCII} control characters,
+used so often that they have special keys of their own.  For instance,
+@key{TAB} was another name for @kbd{C-i}.  Later, users found it
+convenient to distinguish in Emacs between these keys and the ``same''
+control characters typed with the @key{CTRL} key.  Therefore, on most
+modern terminals, they are no longer the same, and @key{TAB} is
+distinguishable from @kbd{C-i}.
+
+  Emacs can distinguish these two kinds of input if the keyboard does.
+It treats the ``special'' keys as function keys named @code{tab},
+@code{return}, @code{backspace}, @code{linefeed}, @code{escape}, and
+@code{delete}.  These function keys translate automatically into the
+corresponding @acronym{ASCII} characters @emph{if} they have no
+bindings of their own.  As a result, neither users nor Lisp programs
+need to pay attention to the distinction unless they care to.
+
+  If you do not want to distinguish between (for example) @key{TAB} and
+@kbd{C-i}, make just one binding, for the @acronym{ASCII} character @key{TAB}
+(octal code 011).  If you do want to distinguish, make one binding for
+this @acronym{ASCII} character, and another for the ``function key'' @code{tab}.
+
+  With an ordinary @acronym{ASCII} terminal, there is no way to distinguish
+between @key{TAB} and @kbd{C-i} (and likewise for other such pairs),
+because the terminal sends the same character in both cases.
+
+@node Mouse Buttons
+@subsection Rebinding Mouse Buttons
+@cindex mouse button events
+@cindex rebinding mouse buttons
+@cindex click events
+@cindex drag events
+@cindex down events
+@cindex button down events
+
+  Emacs uses Lisp symbols to designate mouse buttons, too.  The ordinary
+mouse events in Emacs are @dfn{click} events; these happen when you
+press a button and release it without moving the mouse.  You can also
+get @dfn{drag} events, when you move the mouse while holding the button
+down.  Drag events happen when you finally let go of the button.
+
+  The symbols for basic click events are @code{mouse-1} for the leftmost
+button, @code{mouse-2} for the next, and so on.  Here is how you can
+redefine the second mouse button to split the current window:
+
+@example
+(global-set-key [mouse-2] 'split-window-vertically)
+@end example
+
+  The symbols for drag events are similar, but have the prefix
+@samp{drag-} before the word @samp{mouse}.  For example, dragging the
+first button generates a @code{drag-mouse-1} event.
+
+  You can also define bindings for events that occur when a mouse button
+is pressed down.  These events start with @samp{down-} instead of
+@samp{drag-}.  Such events are generated only if they have key bindings.
+When you get a button-down event, a corresponding click or drag event
+will always follow.
+
+@cindex double clicks
+@cindex triple clicks
+  If you wish, you can distinguish single, double, and triple clicks.  A
+double click means clicking a mouse button twice in approximately the
+same place.  The first click generates an ordinary click event.  The
+second click, if it comes soon enough, generates a double-click event
+instead.  The event type for a double-click event starts with
+@samp{double-}: for example, @code{double-mouse-3}.
+
+  This means that you can give a special meaning to the second click at
+the same place, but it must act on the assumption that the ordinary
+single click definition has run when the first click was received.
+
+  This constrains what you can do with double clicks, but user interface
+designers say that this constraint ought to be followed in any case.  A
+double click should do something similar to the single click, only
+``more so.''  The command for the double-click event should perform the
+extra work for the double click.
+
+  If a double-click event has no binding, it changes to the
+corresponding single-click event.  Thus, if you don't define a
+particular double click specially, it executes the single-click command
+twice.
+
+  Emacs also supports triple-click events whose names start with
+@samp{triple-}.  Emacs does not distinguish quadruple clicks as event
+types; clicks beyond the third generate additional triple-click events.
+However, the full number of clicks is recorded in the event list, so
+if you know Emacs Lisp you can distinguish if you really want to
+(@pxref{Accessing Events,,, elisp, The Emacs Lisp Reference Manual}).
+We don't recommend distinct meanings for more than three clicks, but
+sometimes it is useful for subsequent clicks to cycle through the same
+set of three meanings, so that four clicks are equivalent to one
+click, five are equivalent to two, and six are equivalent to three.
+
+  Emacs also records multiple presses in drag and button-down events.
+For example, when you press a button twice, then move the mouse while
+holding the button, Emacs gets a @samp{double-drag-} event.  And at the
+moment when you press it down for the second time, Emacs gets a
+@samp{double-down-} event (which is ignored, like all button-down
+events, if it has no binding).
+
+@vindex double-click-time
+  The variable @code{double-click-time} specifies how much time can
+elapse between clicks and still allow them to be grouped as a multiple
+click.  Its value is in units of milliseconds.  If the value is
+@code{nil}, double clicks are not detected at all.  If the value is
+@code{t}, then there is no time limit.  The default is 500.
+
+@vindex double-click-fuzz
+  The variable @code{double-click-fuzz} specifies how much the mouse
+can move between clicks and still allow them to be grouped as a multiple
+click.  Its value is in units of pixels on windowed displays and in
+units of 1/8 of a character cell on text-mode terminals; the default is
+3.
+
+  The symbols for mouse events also indicate the status of the modifier
+keys, with the usual prefixes @samp{C-}, @samp{M-}, @samp{H-},
+@samp{s-}, @samp{A-} and @samp{S-}.  These always precede @samp{double-}
+or @samp{triple-}, which always precede @samp{drag-} or @samp{down-}.
+
+  A frame includes areas that don't show text from the buffer, such as
+the mode line and the scroll bar.  You can tell whether a mouse button
+comes from a special area of the screen by means of dummy ``prefix
+keys.''  For example, if you click the mouse in the mode line, you get
+the prefix key @code{mode-line} before the ordinary mouse-button symbol.
+Thus, here is how to define the command for clicking the first button in
+a mode line to run @code{scroll-up}:
+
+@example
+(global-set-key [mode-line mouse-1] 'scroll-up)
+@end example
+
+  Here is the complete list of these dummy prefix keys and their
+meanings:
+
+@table @code
+@item mode-line
+The mouse was in the mode line of a window.
+@item vertical-line
+The mouse was in the vertical line separating side-by-side windows.  (If
+you use scroll bars, they appear in place of these vertical lines.)
+@item vertical-scroll-bar
+The mouse was in a vertical scroll bar.  (This is the only kind of
+scroll bar Emacs currently supports.)
+@item menu-bar
+The mouse was in the menu bar.
+@item header-line
+The mouse was in a header line.
+@ignore
+@item horizontal-scroll-bar
+The mouse was in a horizontal scroll bar.  Horizontal scroll bars do
+horizontal scrolling, and people don't use them often.
+@end ignore
+@end table
+
+  You can put more than one mouse button in a key sequence, but it isn't
+usual to do so.
+
+@node Disabling
+@subsection Disabling Commands
+@cindex disabled command
+
+  Disabling a command means that invoking it interactively asks for
+confirmation from the user.  The purpose of disabling a command is to
+prevent users from executing it by accident; we do this for commands
+that might be confusing to the uninitiated.
+
+  Attempting to invoke a disabled command interactively in Emacs
+displays a window containing the command's name, its documentation,
+and some instructions on what to do immediately; then Emacs asks for
+input saying whether to execute the command as requested, enable it
+and execute it, or cancel.  If you decide to enable the command, you
+must then answer another question---whether to do this permanently, or
+just for the current session.  (Enabling permanently works by
+automatically editing your @file{.emacs} file.)  You can also type
+@kbd{!} to enable @emph{all} commands, for the current session only.
+
+  The direct mechanism for disabling a command is to put a
+non-@code{nil} @code{disabled} property on the Lisp symbol for the
+command.  Here is the Lisp program to do this:
+
+@example
+(put 'delete-region 'disabled t)
+@end example
+
+  If the value of the @code{disabled} property is a string, that string
+is included in the message displayed when the command is used:
+
+@example
+(put 'delete-region 'disabled
+     "It's better to use `kill-region' instead.\n")
+@end example
+
+@findex disable-command
+@findex enable-command
+  You can make a command disabled either by editing the @file{.emacs}
+file directly, or with the command @kbd{M-x disable-command}, which edits
+the @file{.emacs} file for you.  Likewise, @kbd{M-x enable-command}
+edits @file{.emacs} to enable a command permanently.  @xref{Init File}.
+
+  If Emacs was invoked with the @option{-q} or @option{--no-init-file}
+options (@pxref{Initial Options}), it will not edit your
+@file{~/.emacs} init file.  Doing so could lose information
+because Emacs has not read your init file.
+
+  Whether a command is disabled is independent of what key is used to
+invoke it; disabling also applies if the command is invoked using
+@kbd{M-x}.  However, disabling a command has no effect on calling it
+as a function from Lisp programs.
+
+@node Syntax
+@section The Syntax Table
+@cindex syntax table
+
+  All the Emacs commands which parse words or balance parentheses are
+controlled by the @dfn{syntax table}.  The syntax table says which
+characters are opening delimiters, which are parts of words, which are
+string quotes, and so on.  It does this by assigning each character to
+one of fifteen-odd @dfn{syntax classes}.  In some cases it specifies
+some additional information also.
+
+  Each major mode has its own syntax table (though related major modes
+sometimes share one syntax table), which it installs in each buffer
+that uses the mode.  The syntax table installed in the current buffer
+is the one that all commands use, so we call it ``the'' syntax table.
+
+@kindex C-h s
+@findex describe-syntax
+  To display a description of the contents of the current syntax
+table, type @kbd{C-h s} (@code{describe-syntax}).  The description of
+each character includes the string you would have to give to
+@code{modify-syntax-entry} to set up that character's current syntax,
+starting with the character which designates its syntax class, plus
+some English text to explain its meaning.
+
+  A syntax table is actually a Lisp object, a char-table, whose
+elements are cons cells.  For full information on the syntax table,
+see @ref{Syntax Tables,, Syntax Tables, elisp, The Emacs Lisp
+Reference Manual}.
+
+@node Init File
+@section The Init File, @file{~/.emacs}
+@cindex init file
+@cindex Emacs initialization file
+@cindex key rebinding, permanent
+@cindex rebinding keys, permanently
+@cindex startup (init file)
+
+  When Emacs is started, it normally loads a Lisp program from the file
+@file{.emacs} or @file{.emacs.el} in your home directory (@pxref{Find Init}).
+We call this file your @dfn{init file} because it specifies how to
+initialize Emacs for you.  You can use the command line switch
+@samp{-q} to prevent loading your init file, and @samp{-u} (or
+@samp{--user}) to specify a different user's init file (@pxref{Initial
+Options}).
+
+  You can also use @file{~/.emacs.d/init.el} as the init file.  Emacs
+tries this if it cannot find @file{~/.emacs} or @file{~/.emacs.el}.
+
+@cindex @file{default.el}, the default init file
+  There can also be a @dfn{default init file}, which is the library
+named @file{default.el}, found via the standard search path for
+libraries.  The Emacs distribution contains no such library; your site
+may create one for local customizations.  If this library exists, it is
+loaded whenever you start Emacs (except when you specify @samp{-q}).
+But your init file, if any, is loaded first; if it sets
+@code{inhibit-default-init} non-@code{nil}, then @file{default} is not
+loaded.
+
+@cindex site init file
+@cindex @file{site-start.el}, the site startup file
+  Your site may also have a @dfn{site startup file}; this is named
+@file{site-start.el}, if it exists.  Like @file{default.el}, Emacs
+finds this file via the standard search path for Lisp libraries.
+Emacs loads this library before it loads your init file.  To inhibit
+loading of this library, use the option @samp{--no-site-file}.
+@xref{Initial Options}.  We recommend against using
+@file{site-start.el} for changes that some users may not like.  It is
+better to put them in @file{default.el}, so that users can more easily
+override them.
+
+  You can place @file{default.el} and @file{site-start.el} in any of
+the directories which Emacs searches for Lisp libraries.  The variable
+@code{load-path} (@pxref{Lisp Libraries}) specifies these directories.
+Many sites put these files in the @file{site-lisp} subdirectory of the
+Emacs installation directory, typically
+@file{/usr/local/share/emacs/site-lisp}.
+
+  If you have a large amount of code in your @file{.emacs} file, you
+should rename it to @file{~/.emacs.el}, and byte-compile it.  @xref{Byte
+Compilation,, Byte Compilation, elisp, the Emacs Lisp Reference Manual},
+for more information about compiling Emacs Lisp programs.
+
+  If you are going to write actual Emacs Lisp programs that go beyond
+minor customization, you should read the @cite{Emacs Lisp Reference Manual}.
+@ifnottex
+@xref{Top, Emacs Lisp, Emacs Lisp, elisp, the Emacs Lisp Reference
+Manual}.
+@end ifnottex
+
+@menu
+* Init Syntax::	        Syntax of constants in Emacs Lisp.
+* Init Examples::       How to do some things with an init file.
+* Terminal Init::       Each terminal type can have an init file.
+* Find Init::	        How Emacs finds the init file.
+* Init Non-ASCII::      Using non-@acronym{ASCII} characters in an init file.
+@end menu
+
+@node Init Syntax
+@subsection Init File Syntax
+
+  The @file{.emacs} file contains one or more Lisp function call
+expressions.  Each of these consists of a function name followed by
+arguments, all surrounded by parentheses.  For example, @code{(setq
+fill-column 60)} calls the function @code{setq} to set the variable
+@code{fill-column} (@pxref{Filling}) to 60.
+
+  You can set any Lisp variable with @code{setq}, but with certain
+variables @code{setq} won't do what you probably want in the
+@file{.emacs} file.  Some variables automatically become buffer-local
+when set with @code{setq}; what you want in @file{.emacs} is to set
+the default value, using @code{setq-default}.  Some customizable minor
+mode variables do special things to enable the mode when you set them
+with Customize, but ordinary @code{setq} won't do that; to enable the
+mode in your @file{.emacs} file, call the minor mode command.  The
+following section has examples of both of these methods.
+
+  The second argument to @code{setq} is an expression for the new
+value of the variable.  This can be a constant, a variable, or a
+function call expression.  In @file{.emacs}, constants are used most
+of the time.  They can be:
+
+@table @asis
+@item Numbers:
+Numbers are written in decimal, with an optional initial minus sign.
+
+@item Strings:
+@cindex Lisp string syntax
+@cindex string syntax
+Lisp string syntax is the same as C string syntax with a few extra
+features.  Use a double-quote character to begin and end a string constant.
+
+In a string, you can include newlines and special characters literally.
+But often it is cleaner to use backslash sequences for them: @samp{\n}
+for newline, @samp{\b} for backspace, @samp{\r} for carriage return,
+@samp{\t} for tab, @samp{\f} for formfeed (control-L), @samp{\e} for
+escape, @samp{\\} for a backslash, @samp{\"} for a double-quote, or
+@samp{\@var{ooo}} for the character whose octal code is @var{ooo}.
+Backslash and double-quote are the only characters for which backslash
+sequences are mandatory.
+
+@samp{\C-} can be used as a prefix for a control character, as in
+@samp{\C-s} for @acronym{ASCII} control-S, and @samp{\M-} can be used as a prefix for
+a Meta character, as in @samp{\M-a} for @kbd{Meta-A} or @samp{\M-\C-a} for
+@kbd{Control-Meta-A}.@refill
+
+@xref{Init Non-ASCII}, for information about including
+non-@acronym{ASCII} in your init file.
+
+@item Characters:
+Lisp character constant syntax consists of a @samp{?} followed by
+either a character or an escape sequence starting with @samp{\}.
+Examples: @code{?x}, @code{?\n}, @code{?\"}, @code{?\)}.  Note that
+strings and characters are not interchangeable in Lisp; some contexts
+require one and some contexts require the other.
+
+@xref{Init Non-ASCII}, for information about binding commands to
+keys which send non-@acronym{ASCII} characters.
+
+@item True:
+@code{t} stands for `true'.
+
+@item False:
+@code{nil} stands for `false'.
+
+@item Other Lisp objects:
+Write a single-quote (@code{'}) followed by the Lisp object you want.
+@end table
+
+@node Init Examples
+@subsection Init File Examples
+
+  Here are some examples of doing certain commonly desired things with
+Lisp expressions:
+
+@itemize @bullet
+@item
+Make @key{TAB} in C mode just insert a tab if point is in the middle of a
+line.
+
+@example
+(setq c-tab-always-indent nil)
+@end example
+
+Here we have a variable whose value is normally @code{t} for `true'
+and the alternative is @code{nil} for `false'.
+
+@item
+Make searches case sensitive by default (in all buffers that do not
+override this).
+
+@example
+(setq-default case-fold-search nil)
+@end example
+
+This sets the default value, which is effective in all buffers that do
+not have local values for the variable.  Setting @code{case-fold-search}
+with @code{setq} affects only the current buffer's local value, which
+is not what you probably want to do in an init file.
+
+@item
+@vindex user-mail-address
+Specify your own email address, if Emacs can't figure it out correctly.
+
+@example
+(setq user-mail-address "rumsfeld@@torture.gov")
+@end example
+
+Various Emacs packages that need your own email address use the value of
+@code{user-mail-address}.
+
+@item
+Make Text mode the default mode for new buffers.
+
+@example
+(setq default-major-mode 'text-mode)
+@end example
+
+Note that @code{text-mode} is used because it is the command for
+entering Text mode.  The single-quote before it makes the symbol a
+constant; otherwise, @code{text-mode} would be treated as a variable
+name.
+
+@need 1500
+@item
+Set up defaults for the Latin-1 character set
+which supports most of the languages of Western Europe.
+
+@example
+(set-language-environment "Latin-1")
+@end example
+
+@need 1500
+@item
+Turn off Line Number mode, a global minor mode.
+
+@example
+(line-number-mode 0)
+@end example
+
+@need 1500
+@item
+Turn on Auto Fill mode automatically in Text mode and related modes.
+
+@example
+(add-hook 'text-mode-hook
+  '(lambda () (auto-fill-mode 1)))
+@end example
+
+This shows how to add a hook function to a normal hook variable
+(@pxref{Hooks}).  The function we supply is a list starting with
+@code{lambda}, with a single-quote in front of it to make it a list
+constant rather than an expression.
+
+It's beyond the scope of this manual to explain Lisp functions, but for
+this example it is enough to know that the effect is to execute
+@code{(auto-fill-mode 1)} when Text mode is entered.  You can replace
+that with any other expression that you like, or with several
+expressions in a row.
+
+Emacs comes with a function named @code{turn-on-auto-fill} whose
+definition is @code{(lambda () (auto-fill-mode 1))}.  Thus, a simpler
+way to write the above example is as follows:
+
+@example
+(add-hook 'text-mode-hook 'turn-on-auto-fill)
+@end example
+
+@item
+Load the installed Lisp library named @file{foo} (actually a file
+@file{foo.elc} or @file{foo.el} in a standard Emacs directory).
+
+@example
+(load "foo")
+@end example
+
+When the argument to @code{load} is a relative file name, not starting
+with @samp{/} or @samp{~}, @code{load} searches the directories in
+@code{load-path} (@pxref{Lisp Libraries}).
+
+@item
+Load the compiled Lisp file @file{foo.elc} from your home directory.
+
+@example
+(load "~/foo.elc")
+@end example
+
+Here an absolute file name is used, so no searching is done.
+
+@item
+@cindex loading Lisp libraries automatically
+@cindex autoload Lisp libraries
+Tell Emacs to find the definition for the function @code{myfunction}
+by loading a Lisp library named @file{mypackage} (i.e.@: a file
+@file{mypackage.elc} or @file{mypackage.el}):
+
+@example
+(autoload 'myfunction "mypackage" "Do what I say." t)
+@end example
+
+@noindent
+Here the string @code{"Do what I say."} is the function's
+documentation string.  You specify it in the @code{autoload}
+definition so it will be available for help commands even when the
+package is not loaded.  The last argument, @code{t}, indicates that
+this function is interactive; that is, it can be invoked interactively
+by typing @kbd{M-x myfunction @key{RET}} or by binding it to a key.
+If the function is not interactive, omit the @code{t} or use
+@code{nil}.
+
+@item
+Rebind the key @kbd{C-x l} to run the function @code{make-symbolic-link}
+(@pxref{Init Rebinding}).
+
+@example
+(global-set-key "\C-xl" 'make-symbolic-link)
+@end example
+
+or
+
+@example
+(define-key global-map "\C-xl" 'make-symbolic-link)
+@end example
+
+Note once again the single-quote used to refer to the symbol
+@code{make-symbolic-link} instead of its value as a variable.
+
+@item
+Do the same thing for Lisp mode only.
+
+@example
+(define-key lisp-mode-map "\C-xl" 'make-symbolic-link)
+@end example
+
+@item
+Redefine all keys which now run @code{next-line} in Fundamental mode
+so that they run @code{forward-line} instead.
+
+@findex substitute-key-definition
+@example
+(substitute-key-definition 'next-line 'forward-line
+                           global-map)
+@end example
+
+@item
+Make @kbd{C-x C-v} undefined.
+
+@example
+(global-unset-key "\C-x\C-v")
+@end example
+
+One reason to undefine a key is so that you can make it a prefix.
+Simply defining @kbd{C-x C-v @var{anything}} will make @kbd{C-x C-v} a
+prefix, but @kbd{C-x C-v} must first be freed of its usual non-prefix
+definition.
+
+@item
+Make @samp{$} have the syntax of punctuation in Text mode.
+Note the use of a character constant for @samp{$}.
+
+@example
+(modify-syntax-entry ?\$ "." text-mode-syntax-table)
+@end example
+
+@item
+Enable the use of the command @code{narrow-to-region} without confirmation.
+
+@example
+(put 'narrow-to-region 'disabled nil)
+@end example
+
+@item
+Adjusting the configuration to various platforms and Emacs versions.
+
+Users typically want Emacs to behave the same on all systems, so the
+same init file is right for all platforms.  However, sometimes it
+happens that a function you use for customizing Emacs is not available
+on some platforms or in older Emacs versions.  To deal with that
+situation, put the customization inside a conditional that tests whether
+the function or facility is available, like this:
+
+@example
+(if (fboundp 'blink-cursor-mode)
+    (blink-cursor-mode 0))
+
+(if (boundp 'coding-category-utf-8)
+    (set-coding-priority '(coding-category-utf-8)))
+@end example
+
+@noindent
+You can also simply disregard the errors that occur if the
+function is not defined.
+
+@example
+(condition case ()
+    (set-face-background 'region "grey75")
+  (error nil))
+@end example
+
+A @code{setq} on a variable which does not exist is generally
+harmless, so those do not need a conditional.
+@end itemize
+
+@node Terminal Init
+@subsection Terminal-specific Initialization
+
+  Each terminal type can have a Lisp library to be loaded into Emacs when
+it is run on that type of terminal.  For a terminal type named
+@var{termtype}, the library is called @file{term/@var{termtype}} and it is
+found by searching the directories @code{load-path} as usual and trying the
+suffixes @samp{.elc} and @samp{.el}.  Normally it appears in the
+subdirectory @file{term} of the directory where most Emacs libraries are
+kept.@refill
+
+  The usual purpose of the terminal-specific library is to map the
+escape sequences used by the terminal's function keys onto more
+meaningful names, using @code{function-key-map}.  See the file
+@file{term/lk201.el} for an example of how this is done.  Many function
+keys are mapped automatically according to the information in the
+Termcap data base; the terminal-specific library needs to map only the
+function keys that Termcap does not specify.
+
+  When the terminal type contains a hyphen, only the part of the name
+before the first hyphen is significant in choosing the library name.
+Thus, terminal types @samp{aaa-48} and @samp{aaa-30-rv} both use
+the library @file{term/aaa}.  The code in the library can use
+@code{(getenv "TERM")} to find the full terminal type name.@refill
+
+@vindex term-file-prefix
+  The library's name is constructed by concatenating the value of the
+variable @code{term-file-prefix} and the terminal type.  Your @file{.emacs}
+file can prevent the loading of the terminal-specific library by setting
+@code{term-file-prefix} to @code{nil}.
+
+@vindex term-setup-hook
+  Emacs runs the hook @code{term-setup-hook} at the end of
+initialization, after both your @file{.emacs} file and any
+terminal-specific library have been read in.  Add hook functions to this
+hook if you wish to override part of any of the terminal-specific
+libraries and to define initializations for terminals that do not have a
+library.  @xref{Hooks}.
+
+@node Find Init
+@subsection How Emacs Finds Your Init File
+
+  Normally Emacs uses the environment variable @env{HOME}
+(@pxref{General Variables, HOME}) to find @file{.emacs}; that's what
+@samp{~} means in a file name.  If @file{.emacs} is not found inside
+@file{~/} (nor @file{.emacs.el}), Emacs looks for
+@file{~/.emacs.d/init.el} (which, like @file{~/.emacs.el}, can be
+byte-compiled).
+
+  However, if you run Emacs from a shell started by @code{su}, Emacs
+tries to find your own @file{.emacs}, not that of the user you are
+currently pretending to be.  The idea is that you should get your own
+editor customizations even if you are running as the super user.
+
+  More precisely, Emacs first determines which user's init file to use.
+It gets your user name from the environment variables @env{LOGNAME} and
+@env{USER}; if neither of those exists, it uses effective user-ID.
+If that user name matches the real user-ID, then Emacs uses @env{HOME};
+otherwise, it looks up the home directory corresponding to that user
+name in the system's data base of users.
+@c  LocalWords:  backtab
+
+@node Init Non-ASCII
+@subsection Non-@acronym{ASCII} Characters in Init Files
+@cindex international characters in @file{.emacs}
+@cindex non-@acronym{ASCII} characters in @file{.emacs}
+@cindex non-@acronym{ASCII} keys, binding
+@cindex rebinding non-@acronym{ASCII} keys
+
+  Language and coding systems may cause problems if your init file
+contains non-@acronym{ASCII} characters, such as accented letters, in
+strings or key bindings.
+
+  If you want to use non-@acronym{ASCII} characters in your init file,
+you should put a @w{@samp{-*-coding: @var{coding-system}-*-}} tag on
+the first line of the init file, and specify a coding system that
+supports the character(s) in question.  @xref{Recognize Coding}.  This
+is because the defaults for decoding non-@acronym{ASCII} text might
+not yet be set up by the time Emacs reads those parts of your init
+file which use such strings, possibly leading Emacs to decode those
+strings incorrectly.  You should then avoid adding Emacs Lisp code
+that modifies the coding system in other ways, such as calls to
+@code{set-language-environment}.
+
+  To bind non-@acronym{ASCII} keys, you must use a vector (@pxref{Init
+Rebinding}).  The string syntax cannot be used, since the
+non-@acronym{ASCII} characters will be interpreted as meta keys.  For
+instance:
+
+@example
+(global-set-key [?@var{char}] 'some-function)
+@end example
+
+@noindent
+Type @kbd{C-q}, followed by the key you want to bind, to insert @var{char}.
+
+  @strong{Warning:} if you change the keyboard encoding, or change
+between multibyte and unibyte mode, or anything that would alter which
+code @kbd{C-q} would insert for that character, this keybinding may
+stop working.  It is therefore advisable to use one and only one
+coding system, for your init file as well as the files you edit.  For
+example, don't mix the @samp{latin-1} and @samp{latin-9} coding
+systems.
+
+@ignore
+   arch-tag: c68abddb-4410-4fb5-925f-63394e971d93
+@end ignore