Mercurial > emacs

--- a/lisp/makefile.w32-in	Thu Sep 14 21:19:58 2000 +0000
+++ b/lisp/makefile.w32-in	Thu Sep 14 21:22:43 2000 +0000
@@ -24,13 +24,232 @@

 all: $(ALL)

-topdontcompile = cus-load.el forms-d2.el forms-pass.el patcomp.el \
-		 subdirs.el version.el
-maildontcompile = mail/blessmail.el mail/sc.el
-playdontcompile = play/bruce.el
-interdontcompile = international/latin-1.el international/latin-2.el \
-		 international/latin-3.el international/latin-4.el \
-		 international/latin-5.el international/mule-conf.el
+SQUOTE='
+# '
+
+#lisp=$(MAKEDIR:\=/)
+lisp=.
+
+# You can specify a different executable on the make command line,
+# e.g. "make EMACS=../src/emacs ...".
+
+EMACS = "../bin/emacs.exe"
+
+# Command line flags for Emacs.  This must include --multibyte,
+# otherwise some files will not compile.
+
+EMACSOPT = -batch --no-init-file --no-site-file --multibyte
+
+lisptagsfiles1 = $(lisp)/*.el
+lisptagsfiles2 = $(lisp)/*/*.el
+ETAGS = "../lib-src/$(BLD)/etags"
+
+# Files which should not be compiled.
+# - emacs-lisp/cl-specs.el:  only contains `def-edebug-spec's so there's
+#   no point compiling it, although it doesn't hurt.
+
+DONTCOMPILE = \
+	$(lisp)/bindings.el \
+	$(lisp)/cus-load.el \
+	$(lisp)/cus-start.el \
+	$(lisp)/emacs-lisp/cl-specs.el \
+	$(lisp)/eshell/esh-maint.el \
+	$(lisp)/eshell/esh-groups.el \
+	$(lisp)/finder-inf.el \
+	$(lisp)/forms-d2.el \
+	$(lisp)/forms-pass.el \
+	$(lisp)/generic-x.el \
+	$(lisp)/international/latin-1.el \
+	$(lisp)/international/latin-2.el \
+	$(lisp)/international/latin-3.el \
+	$(lisp)/international/latin-4.el \
+	$(lisp)/international/latin-5.el \
+	$(lisp)/international/latin-8.el \
+	$(lisp)/international/latin-9.el \
+	$(lisp)/international/mule-conf.el \
+	$(lisp)/loaddefs.el \
+	$(lisp)/loadup.el \
+	$(lisp)/mail/blessmail.el \
+	$(lisp)/mail/sc.el \
+	$(lisp)/patcomp.el \
+	$(lisp)/paths.el \
+	$(lisp)/play/bruce.el \
+	$(lisp)/subdirs.el \
+	$(lisp)/term/internal.el \
+	$(lisp)/version.el
+
+# Files to compile before others during a bootstrap.  This is done
+# to speed up the bootstrap process.
+
+COMPILE_FIRST = \
+	$(lisp)/emacs-lisp/byte-opt.el \
+	$(lisp)/emacs-lisp/bytecomp.el \
+	$(lisp)/subr.el
+
+# The actual Emacs command run in the targets below.
+
+emacs = $(EMACS) $(EMACSOPT)
+
+# Common command to find subdirectories
+
+setwins=subdirs=`find $$wd -type d -print`; \
+	for file in $$subdirs; do \
+	   case $$file in */Old | */RCS | */CVS | */CVS/* | */=* ) ;; \
+		*) wins="$$wins $$file" ;; \
+	   esac; \
+        done
+
+# Have to define the list of subdirs manually when not using sh.
+WINS=\
+	calendar \
+	emacs-lisp \
+	emulation \
+	eshell \
+	gnus \
+	international \
+	language \
+	mail \
+	net \
+	play \
+	progmodes \
+	term \
+	textmodes
+
+doit:
+
+cus-load.el:
+	touch $@
+custom-deps: cus-load.el doit
+	@echo Directories: $(WINS)
+	$(emacs) -l cus-dep --eval $(ARGQUOTE)(setq find-file-hooks nil)$(ARGQUOTE) -f custom-make-dependencies $(lisp) $(WINS)
+
+finder-inf.el:
+	echo (provide $(SQUOTE)finder-inf)>> $@
+
+finder-data: finder-inf.el doit
+	@echo Directories: $(WINS)
+	$(emacs) -l finder -f finder-compile-keywords-make-dist $(lisp) $(WINS)
+
+loaddefs.el:
+	echo ;;; loaddefs.el --- automatically extracted autoloads> $@
+	echo ;;; Code:>> $@
+	echo >> $@
+	echo ;;; Local Variables:>> $@
+	echo ;;; version-control: never>> $@
+	echo ;;; no-byte-compile: t>> $@
+	echo ;;; no-update-autoloads: t>> $@
+	echo ;;; End:>> $@
+	echo ;;; loaddefs.el ends here>> $@
+
+autoloads: loaddefs.el doit
+	@echo Directories: $(WINS)
+	set EMACSLOADPATH=$(lisp)
+	$(SETLOADPATH) $(emacs) -l autoload --eval $(ARGQUOTE)(setq find-file-hooks nil generated-autoload-file $(DQUOTE)$(lisp)/loaddefs.el$(DQUOTE))$(ARGQUOTE) -f batch-update-autoloads $(lisp) $(WINS)
+
+subdirs.el:
+	$(MAKE) $(MFLAGS) update-subdirs
+
+# Need separate version for sh and native cmd.exe
+update-subdirs: update-subdirs-$(SHELLTYPE)
+
+update-subdirs-CMD: doit
+	@set QWINS=
+	@for %d in ($(WINS)) do if not (%d)==(term) set QWINS=%QWINS% "%d"
+	echo ;; In load-path, after this directory should come> subdirs.el
+	echo ;; certain of its subdirectories.  Here we specify them.>> subdirs.el
+	echo (normal-top-level-add-to-load-path $(SQUOTE)(%QWINS%))>> subdirs.el
+
+update-subdirs-SH: doit
+	wd=$(lisp); $(setwins); \
+	for file in $$wins; do \
+	   $(srcdir)/update-subdirs $$file; \
+	done;
+
+updates: update-subdirs autoloads finder-data custom-deps
+
+TAGS: $(lisptagsfiles1) $(lisptagsfiles2)
+	$(ETAGS) $(lisptagsfiles1) $(lisptagsfiles2)
+
+TAGS-LISP: $(lispsource)$(lisptagsfiles1) $(lispsource)$(lisptagsfiles2)
+	$(ETAGS) -o TAGS-LISP $(lispsource)$(lisptagsfiles1) $(lispsource)$(lisptagsfiles2)
+
+.el.elc:
+	set EMACSLOADPATH=$(lisp)
+	-$(SETLOADPATH) $(emacs) -f batch-byte-compile $<
+
+$(DONTCOMPILE:.el=.elc):
+	-$(DEL) $@
+
+# Compile all Lisp files, except those from DONTCOMPILE.  This
+# compiles files unconditionally.  All .elc files are made writable
+# before compilation in case we checked out read-only (CVS option -r).
+# Files MUST be compiled one by one.  If we compile several files in a
+# row we can't make sure that the compilation environment is clean.
+# We also set the load-path of the Emacs used for compilation to the
+# current directory and its subdirectories, to make sure require's and
+# load's in the files being compiled find the right files.
+
+# Need separate version for sh and native cmd.exe
+compile-files: subdirs.el compile-files-$(SHELLTYPE) doit
+
+compile-files-CMD:
+	set EMACSLOADPATH=$(lisp)
+	-for %f in ($(lisp) $(WINS)) do for %g in (%f\*.elc) do @attrib -r %g
+	for %f in ($(COMPILE_FIRST)) do $(emacs) -f batch-byte-compile %f
+	for %f in ($(lisp) $(WINS)) do for %g in (%f/*.el) do $(emacs) -f batch-byte-compile %f/%g
+
+compile-files-SH:
+#	for elc in $(lisp)/*.elc $(lisp)/*/*.elc; do attrib -r $$elc; done
+	for el in $(COMPILE_FIRST); do \
+	  echo Compiling $$el; \
+	  EMACSLOADPATH=$(lisp) $(emacs) -f batch-byte-compile $$el; \
+	done
+	for dir in $(lisp) $(WINS); do \
+	  for el in $$dir/*.el; do \
+	    echo Compiling $$el; \
+	    EMACSLOADPATH=$(lisp) $(emacs) -f batch-byte-compile $$el; \
+	  done; \
+	done
+
+# Backup compiled Lisp files in elc.tar.gz.  If that file already
+# exists, make a backup of it.
+
+backup-compiled-files:
+	-mv $(lisp)/elc.tar.gz $(lisp)/elc.tar.gz~
+	-tar czf $(lisp)/elc.tar.gz $(lisp)/*.elc $(lisp)/*/*.elc
+
+# Compile Lisp files, but save old compiled files first.
+
+compile: backup-compiled-files compile-files
+
+# Recompile all Lisp files which are newer than their .elc files.
+# Note that this doesn't create .elc files.  It only recompiles if an
+# .elc is present.
+
+recompile: doit
+	set EMACSLOADPATH=$(lisp)
+	$(SETLOADPATH) $(emacs) -f batch-byte-recompile-directory .
+
+# Prepare a bootstrap in the lisp subdirectory.  Build loaddefs.el,
+# because it's not sure it's up-to-date, and if it's not, that might
+# lead to errors during the bootstrap because something fails to
+# autoload as expected.  Remove compiled Lisp files so that
+# bootstrap-emacs will be built from sources only.
+
+# Need separate version for sh and native cmd.exe
+bootstrap-clean: bootstrap-clean-$(SHELLTYPE)
+
+bootstrap-clean-CMD:
+	if exist $(EMACS) $(MAKE) $(MFLAGS) autoloads
+	-for %f in ($(lisp) $(WINS)) do for %g in (%f\*.elc) do @$(DEL) %g
+
+bootstrap-clean-SH:
+	if test -f $(EMACS); then $(MAKE) $(MFLAGS) autoloads; fi
+	-rm -f $(lisp)/*.elc $(lisp)/*/*.elc
+
+# Generate/update files for the bootstrap process.
+
+bootstrap: autoloads compile-files custom-deps

 #
 # Assuming INSTALL_DIR is defined, copy the elisp files to it
@@ -44,20 +263,20 @@
 #ifdef COPY_LISP_SOURCE
 		$(IFNOTSAMEDIR) $(CP_DIR) . "$(INSTALL_DIR)/lisp" $(ENDIF)
 #else
-		$(IFNOTSAMEDIR) $(CP_DIR) *.elc "$(INSTALL_DIR)/lisp" $(ENDIF)
-		$(IFNOTSAMEDIR) $(CP) cus-load.el "$(INSTALL_DIR)/lisp" $(ENDIF)
-		$(IFNOTSAMEDIR) $(CP) forms*.el "$(INSTALL_DIR)/lisp" $(ENDIF)
-		$(IFNOTSAMEDIR) $(CP) patcomp.el "$(INSTALL_DIR)/lisp" $(ENDIF)
-		$(IFNOTSAMEDIR) $(CP) subdirs.el "$(INSTALL_DIR)/lisp" $(ENDIF)
-		$(IFNOTSAMEDIR) $(CP) version.el "$(INSTALL_DIR)/lisp" $(ENDIF)
-		$(IFNOTSAMEDIR) $(CP) mail/blessmail.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
-		$(IFNOTSAMEDIR) $(CP) mail/sc.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
-		$(IFNOTSAMEDIR) $(CP) play/bruce.el "$(INSTALL_DIR)/lisp/play" $(ENDIF)
-		$(IFNOTSAMEDIR) $(CP) international/latin-*.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
-		$(IFNOTSAMEDIR) $(CP) international/mule-conf.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP_DIR) *.elc "$(INSTALL_DIR)/lisp" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) cus-load.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) forms*.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) patcomp.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) subdirs.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) version.el "$(INSTALL_DIR)/lisp" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) mail/blessmail.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) mail/sc.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) play/bruce.el "$(INSTALL_DIR)/lisp/play" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) international/latin-*.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
+#		$(IFNOTSAMEDIR) $(CP) international/mule-conf.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
+#endif
 		- $(DEL) ../same-dir.tst
 		- $(DEL) "$(INSTALL_DIR)/same-dir.tst"
-#endif

 #
 # Maintenance