Mercurial > emacs
changeset 82662:cfc5c1d4d840
Move refcards from etc/ to etc/refcards/
| author | Glenn Morris <rgm@gnu.org> |
|---|---|
| date | Wed, 22 Aug 2007 07:25:35 +0000 |
| parents | 2bd3fec4afef |
| children | bc3a646f3b88 |
| files | etc/refcards/gnus-refcard.tex |
| diffstat | 1 files changed, 1424 insertions(+), 0 deletions(-) [+] |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/etc/refcards/gnus-refcard.tex Wed Aug 22 07:25:35 2007 +0000 @@ -0,0 +1,1424 @@ +\documentclass{article} + +% Previously we had five input LaTeX files (booklet.tex bk-lt.tex bk-a4.tex +% refcard.tex gnusref.tex) and two logo files (gnuslogo-refcard.eps and +% gnuslogo-booklet.eps). +% +% From this LaTeX file (gnus-refcard.tex) plus a single logo (gnus-logo.eps), +% we can generate the refcard and the booklet version. This simplifies to +% distribute the refcard with Emacs. Appropriate Makefile rules were added in +% gnus/texi/Makefile. + +% For Emacs, we may use the following commands (w/o) using Gnus' Makefile: +% +% latex gnus-refcard.tex && +% dvips -t letter -f gnus-refcard.dvi > gnus-refcard.ps +% +% latex '\def\booklettrue{}\def\letterpapertrue{}\input{gnus-refcard}' && +% mv gnus-refcard.dvi gnus-booklet.dvi && +% dvips -t letter -f gnus-booklet.dvi > gnus-booklet.ps + +\usepackage{ifthen} +\ifthenelse{\isundefined{\booklettrue}}{ + \typeout{Creating reference card...} +}{ + \typeout{Creating reference booklet...}} + +\usepackage{supertabular} + +\newlength{\logowidth} \setlength{\logowidth} {6.861in} +\newlength{\logoheight} \setlength{\logoheight}{7.013in} + +\usepackage{graphicx} + +\usepackage{geometry} + +\ifthenelse{\isundefined{\booklettrue}}{% ifcard %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + % Reference Card + + \def\Guide{Card}\def\guide{card} + \def\logoscale{0.25} + + % Page setup for the refcard: + + % \setlength{\textwidth}{7.26in} \setlength{\textheight}{10in} + % \setlength{\topmargin}{-1.0in} + % % the same settings work for A4, although there is a bit of space at the + % % top and bottom of the page. + % \setlength{\oddsidemargin}{-0.5in} \setlength{\evensidemargin}{-0.5in} + + \ifthenelse{\isundefined{\letterpapertrue}}{ + \geometry{a4paper,hmargin=10mm,tmargin=10mm,bmargin=35mm} + }{ + \geometry{hmargin=20mm,tmargin=10mm,bmargin=12mm} + } + +}{ %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + % Reference Booklet + + \def\Guide{Booklet}\def\guide{booklet} + \def\logoscale{0.5}% FIXME: too large for 2up printing? --rsteib + + \ifthenelse{\isundefined{\letterpapertrue}}{ + \geometry{a5paper,hmargin=10mm,tmargin=10mm,bmargin=4mm} + }{ + \geometry{a5paper,hmargin=20mm,tmargin=10mm,bmargin=4mm} + } + + \def\sec{\section} + \def\subsec{\subsection} + \def\subsubsec{\subsubsection} + \def\blankpage{\vspace*{\fill}\par + %\centerline{(This page intentionally left blank.)} + \par\vspace*{\fill}\pagebreak} +}%ifbooklet% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% \input{gnusref} % % % % % % % % % % % % % % % % % % % % % % % % % % +%% include file for the Gnus refcard and booklet + +\def\progver{5.11} % program version +% \def\refver{5.10-2} % refcard version (not used) +\def\date{April, 2006} +\def\author{Gnus Bugfixing Girls + Boys $<$bugs@gnus.org$>$} + +%% +\newlength{\keycolwidth} +\newenvironment{keys}[1]% #1 is the widest key +{\nopagebreak%\noindent% + \settowidth{\keycolwidth}{#1}% + \addtolength{\keycolwidth}{\tabcolsep}% + \addtolength{\keycolwidth}{-\columnwidth}% + \begin{supertabular}{@{}l@{\hspace{\tabcolsep}}p{-\keycolwidth}@{}}}% + {\end{supertabular}\\} + +%% uncomment the first definition if you do not want pagebreaks in maps +%%\newcommand{\esamepage}{\samepage} +\newcommand{\esamepage}{} + +\newcommand*{\B}[1]{{\bf#1})} % bold l)etter + +\newcommand{\Title}{% + \begin{center} + {\bf\LARGE Gnus \progver\ Reference \Guide\\} + %{\normalsize \Guide\ version \refver} + \end{center} + } + +% \newcommand*{\LogoOLD}[1]{\centerline{% +% \makebox[\logoscale\logowidth][l]{\vbox to \logoscale\logoheight +% {\vfill\epsfig{figure=gnuslogo-#1}}\vspace{-\baselineskip}}}} + +\newcommand*{\Logo}[1]{\centerline{% + \includegraphics[width=\logoscale\logowidth]{gnus-logo}}} + +%% Contributions by: +%% 1995 Vladimir Alexiev <vladimir@cs.ualberta.ca> +%% 2000 Felix Natter <fnatter@gmx.net> +%% 2001, 2002, 2003, 2005 \author. +%% Original Gnus manual 1994 Lars Magne Ingebrigtsen +%% Some material from Emacs Help Bindings feature (C-h b). +%% Gnus logo by Luis Fernandes. +\newcommand{\Copyright}{% + \begin{center} + Copyright \copyright\ 1995, 2000, 2002, 2003, 2004, + 2005, 2006, 2007 Free Software Foundation, Inc. + \end{center} + + Permission is granted to make and distribute copies of this reference + \guide{} provided the copyright notice and this permission are preserved on + all copies. Please send corrections, additions and suggestions to the + current maintainer's email address. \Guide{} last edited on \date. + } + +\newcommand{\Notes}{% + \subsection*{Notes} + {\esamepage + Gnus is complex. Currently it has some 876 interactive (user-callable) + functions. Of these 618 are in the two major modes (Group and + Summary/Article). Many of these functions have more than one binding, some + have 3 or even 4 bindings. The total number of keybindings is 677. So in + order to save 40\% space, every function is listed only once on this + \guide, under the ``more logical'' binding. Alternative bindings are given + in parentheses in the beginning of the description. + + Many Gnus commands are affected by the numeric prefix. Normally you enter a + prefix by holding the Meta key and typing a number, but in most Gnus modes + you don't need to use Meta since the digits are not self-inserting. The + prefixed behavior of commands is given in [brackets]. Often the prefix is + used to specify: + + \quad [distance] How many objects to move the point over. + + \quad [scope] How many objects to operate on (including the current one). + + \quad [p/p] The ``Process/Prefix Convention'': If a prefix is given then it + determines how many objects to operate on. Else if there are some objects + marked with the process mark \#, these are operated on. Else only the + current object is affected. + + \quad [level] A group subscribedness level. Only groups with a lower or + equal level will be affected by the operation. If no prefix is given, + `gnus-group-default-list-level' is used. If + `gnus-group-use-permanent-levels', then a prefix to the `g' and `l' + commands will also set the default level. + + \quad [score] An article score. If no prefix is given, + `gnus-summary-default-score' is used. \\*[\baselineskip] + % some keys + Gnus startup-commands:\\* + \begin{keys}{M-x gnus-unplugged} + M-x gnus & start Gnus. \\ + M-x gnus-no-server & start Gnus without connecting to server + (i.e. to read mail). \\ + \end{keys} + Additionally, there are the two commands \texttt{gnus-plugged} and + \texttt{gnus-unplugged}, which are only used if you want to download + news and/or read previously downloaded news offline (see C-c C-i g Gnus + Unplugged RET). Note: \texttt{gnus-no-server} ignores the stuff in + \texttt{gnus-agent-directory}, and thus does not allow you to use Gnus + Unplugged. + % + \begin{keys}{C-c C-i} + C-c C-i & Go to the Gnus online {\bf info}.\\ + C-c C-b & Send a Gnus {\bf bug} report.\\ + \end{keys} + }} + +\newcommand{\GroupLevels}{% + The table below assumes that you use the default Gnus levels. + Fill your user-specific levels in the blank cells.\\[1\baselineskip] + \begin{tabular}{|c|l|l|} + \hline + Level & Groups & Status \\ + \hline + 1 & draft/mail groups & \\ + 2 & mail groups & \\ + 3 & & subscribed \\ + 4 & & \\ + 5 & default list level & \\ + \hline + 6 & & unsubscribed \\ + 7 & & \\ + \hline + 8 & & zombies \\ + \hline + 9 & & killed \\ + \hline + \end{tabular}} + +\newcommand{\MarkCharacters}{% + {\esamepage If a command directly sets a mark, it is shown in parentheses.\\* + \newlength{\markcolwidth} + \settowidth{\markcolwidth}{` '}% widest character + \addtolength{\markcolwidth}{4\tabcolsep} + \addtolength{\markcolwidth}{-\columnwidth} + \newlength{\markdblcolwidth} + \setlength{\markdblcolwidth}{\columnwidth} + \addtolength{\markdblcolwidth}{-2\tabcolsep} + \begin{tabular}{|c|p{-\markcolwidth}|} + \hline + \multicolumn{2}{|p{\markdblcolwidth}|}{{\bf ``Read'' Marks.} + All these marks appear in the first column of the summary line, and so + are mutually exclusive.}\\ + \hline + ` ' & (M-u, M SPC, M c) Not read.\\ + ! & (!, M !, M t) Ticked (interesting).\\ + ? & (?, M ?) Dormant (only followups are interesting).\\ + E & (E, M e, M x) {\bf Expirable}. Only has effect in mail groups.\\ + G & (C, B DEL) Canceled article (or deleted in mailgroups).\\ + \$ & (M-d, M s x, S x). Marked as spam.\\ + \hline\hline + \multicolumn{2}{|p{\markdblcolwidth}|} + {The marks below mean that the article + is read (killed, uninteresting), and have more or less the same effect. + Some commands however explicitly differentiate between them (e.g.\ M + M-C-r, adaptive scoring).}\\ + \hline + r & (d, M d, M r) Deleted (marked as {\bf read}).\\ + C & (M C; M C-c; M H; c, Z c; Z n; Z C) Killed by {\bf catch-up}.\\ + F & SOUPed article. See the manual.\\ + O & {\bf Old} (read in a previous session).\\ + K & (k, M k; C-k, M K) {\bf Killed}.\\ + M & Article marked as read by duplicate suppression.\\ + Q & Article is part of a sparse thread (see ``Threading'' + in the manual).\\ + R & {\bf Read} (viewed in actuality).\\ + X & Killed by a kill file.\\ + Y & Killed due to low score.\\ + \hline\multicolumn{2}{c}{\vspace{1ex}}\\\hline + \multicolumn{2}{|p{\markdblcolwidth}|} + {{\bf Marks not affecting visibility}}\\ + \hline + \# & (\#, M \#, M P p) Processable (will be affected by the next operation). + [2]\\ + A & {\bf Answered} (followed-up or replied). [2]\\ + F & Forwarded. [2]\\ + $\ast$ & Cached. [2]\\ + S & Saved. [2]\\ + N & Recently arrived. [2]\\ + . & Unseen. [2]\\ + + & Over default score. [3]\\ + $-$ & Under default score. [3]\\ + $=$ & Has children (thread underneath it). Add `\%e' to + `gnus-summary-line-format'. [3]\\ + \hline + \end{tabular} + }} + +\newcommand{\GroupModeGeneral}{% + \begin{keys}{C-c M-C-x} + RET & (=) Enter this group. [Prefix: how many (read) articles to fetch. + Positive: newest articles, negative: oldest ones; non-numerical: + view all articles, not just unread]\\ + M-RET & Enter group quickly.\\ + M-SPC & Same as RET but does not expunge and hide dormants.\\ + M-C-RET & Enter group without any processing, changes will not be permanent.\\ + SPC & Select this group and display the first (unread) article. [Same + prefix as above.]\\ + ? & Give a very short help message.\\ + $<$ & Go to the beginning of the Group buffer.\\ + $>$ & Go to the end of the Group buffer.\\ + , & Jump to the lowest-level group with unread articles.\\ + . & Jump to the first group with unread articles.\\ + \^{} & Enter the Server buffer mode.\\ + a & Post an {\bf article} to a group + [Prefix: use group under point to find posting-style].\\ + b & Find {\bf bogus} groups and delete them.\\ + c & Mark all unticked articles in this group as read ({\bf catch-up}). + [p/p]\\ + g & Check the server for new articles ({\bf get}). [level]\\ + M-g & Check the server for new articles in this group ({\bf get}). [p/p]\\ + j & {\bf Jump} to a group.\\ + m & {\bf Mail} a message to someone + [Prefix: use group under point to find posting-style].\\ + n & Go to the {\bf next} group with unread articles. [distance]\\ + M-n & Go to the {\bf next} group on the same or lower level. + [distance]\\ + p & (DEL) Go to the {\bf previous} group with unread articles. + [distance]\\ + M-p & Go to the {\bf previous} group on the same or lower level. [distance]\\ + q & {\bf Quit} Gnus.\\ + r & Re-read the init file ({\bf reset}).\\ + s & {\bf Save} the `.newsrc.eld' file (and `.newsrc' if + `gnus-save-newsrc-file').\\ + z & Suspend (kill all buffers of) Gnus.\\ + B & {\bf Browse} a foreign server.\\ + C & Mark all articles in this group as read ({\bf Catch-up}). [p/p]\\ + F & {\bf Find} new groups and process them.\\ + N & Go to the {\bf next} group. [distance]\\ + P & Go to the {\bf previous} group. [distance]\\ + Q & {\bf Quit} Gnus without saving any startup (.newsrc) files.\\ + R & {\bf Restart} Gnus.\\ + Z & Clear the dribble buffer.\\ + M-c & Clear data from group (marks and list of read articles). \\ + C-c C-s & {\bf Sort} the groups by name, number of unread articles, or level + (depending on `gnus-group-sort-function').\\ + C-c C-x & Run all expirable articles in this group through the {\bf expiry} + process.\\ + C-c M-C-x & Run all articles in all groups through the {\bf expiry} process.\\ + C-c M-g & Activate all {\bf groups}.\\ + C-c C-i & Gnus online-manual ({\bf info}).\\ + C-x C-t & {\bf Transpose} two groups.\\ + H f & Fetch this group's {\bf FAQ} (using ange-ftp).\\ + H c & Display this group's {\bf charter}. [Prefix: query for group]\\ + H C & Display this group's {\bf control message} (using + ange-ftp). [Prefix: query for group]\\ + H v & (V) Display the Gnus {\bf version} number.\\ + H d & (C-c C-d) Show the {\bf description} of this group + [Prefix: re-read from server].\\ + M-d & {\bf Describe} all groups. [Prefix: re-read from server]\\ + D g & Regenerate a Sieve script from group parameters.\\ + D u & Regenerate Sieve script and {\bf upload} to server.\\ + \end{keys} + } + +\newcommand{\ListGroups}{% + {\esamepage + \begin{keys}{A M} + A d & (C-c C-M-a) List all groups whose names or {\bf descriptions} match a regexp.\\ + A k & (C-c C-l) List all {\bf killed} groups. + [Prefix: look at active-file from server]\\ + A l & List all groups on a specific level. + [Prefix: also list groups with no unread articles]\\ + A a & (C-c C-a) List all groups whose names match a regexp + ({\bf apropos}).\\ + A A & List the server's active-file.\\ + A M & List groups that {\bf match} a regexp.\\ + A m & List groups that {\bf match} a regexp and have unread articles. + [level]\\ + A s & (l) List all {\bf subscribed} groups with unread articles. + [level; 5 and lower is the default]\\ + A u & (L) List all groups (including read and {\bf unsubscribed}). + [level; 7 and lower is the default]\\ + A z & List all {\bf zombie} groups.\\ + A c & List all groups with cached articles. [level]\\ + A ? & List all groups with dormant articles. [level]\\ + \end{keys} + } + + \newcommand{\CreateEditGroups}{% + {\esamepage + The select methods are indicated in parentheses.\\* + \begin{keys}{G DEL} + G a & Make the Gnus list {\bf archive} group. (nndir over ange-ftp)\\ + G c & {\bf Customize} this group's parameters.\\ + G d & Make a {\bf directory} group (every file must be a posting and files + must have numeric names). (nndir)\\ + G D & Enter a {\bf directory} as a (temporary) group. + (nneething without recording articles read)\\ + G e & (M-e) {\bf Edit} this group's select method.\\ + G E & {\bf Edit} this group's info (select method, articles read, etc).\\ + G f & Make a group based on a {\bf file}. (nndoc)\\ + G h & Make the Gnus {\bf help} (documentation) group. (nndoc)\\ + G k & Make a {\bf kiboze} group. (nnkiboze)\\ + G m & {\bf Make} a new group.\\ + G p & Edit this group's {\bf parameters}.\\ + G r & Rename this group (does not work with read-only groups!).\\ + G u & Create one of the groups mentioned in gnus-{\bf useful}-groups.\\ + G v & Add this group to a {\bf virtual} group. [p/p]\\ + G V & Make a new empty {\bf virtual} group. (nnvirtual)\\ + G w & Create ephemeral group based on web-search. [Prefix: make solid group + instead]\\ + G R & Make an {\bf RSS} group.\\ + G DEL & {\bf Delete} group [Prefix: delete all articles as well].\\ + G x & Expunge all deleted articles in an nnimap mailbox.\\ + G l & Edit ACL (Access Control {\bf List}) for an nnimap mailbox.\\ + \end{keys} + You can also create mail-groups and read your mail with Gnus (very useful + if you are subscribed to mailing lists), using one of the methods + nnmbox, nnbabyl, nnml, nnmh, or nnfolder. Read about it in the online info + (C-c C-i g Reading Mail RET). + }} + + % TODO: + \newcommand{\SoupCommands}{% + \begin{keys}{G s w} + G s b & gnus-group-brew-soup: not documented.\\ + G s p & gnus-soup-pack-packet: not documented.\\ + G s r & nnsoup-pack-replies: not documented.\\ + G s s & gnus-soup-send-replies: not documented.\\ + G s w & gnus-soup-save-areas: not documented.\\ + \end{keys}} + + \newcommand{\MarkGroups}{% + \begin{keys}{M m} + M m & (\#) Set the process {\bf mark} on this group. [scope]\\ + M r & Mark all groups matching regular expression.\\ + M u & (M-\#) Remove the process mark from this group ({\bf unmark}). + [scope]\\ + M U & Remove the process mark from all groups (\textbf{umark all}).\\ + M w & Mark all groups in the current region. [prefix: unmark]\\ + M b & Mark all groups in the {\bf buffer}. [prefix: unmark]\\ + \end{keys}} + + \newcommand{\GroupTopicsGeneral}{% + {\esamepage + Topics are ``categories'' for groups. Press t in the group-buffer to + toggle gnus-topic-mode (C-c C-i g Group Topics RET).\\* + \begin{keys}{C-c C-x} + T n & Prompt for topic {\bf name} and create it.\\ + T m & {\bf Move} the current group to some other topic [p/p].\\ + T j & {\bf Jump} to a topic.\\ + T c & {\bf Copy} the current group to some other topic [p/p].\\ + T D & Remove (not delete) the current group [p/p].\\ + T M & {\bf Move} all groups matching a regexp to a topic.\\ + T C & {\bf Copy} all groups matching a regexp to a topic.\\ + T H & Toggle {\bf hiding} of empty topics.\\ + T r & {\bf Rename} a topic.\\ + T DEL & Delete an empty topic.\\ + T \# & Mark all groups in the current topic with the process-mark.\\ + T M-\# & Remove the process-mark from all groups in the current topic.\\ + T TAB & (TAB) Indent current topic [Prefix: unindent].\\ + M-TAB & Unindent the current topic.\\ + RET & (SPC) Either unfold topic or enter group [level].\\ + T s & {\bf Show} the current topic. [Prefix: show permanently]\\ + T h & {\bf Hide} the current topic. [Prefix: hide permanently]\\ + C-c C-x & Expire all articles in current group or topic.\\ + C-k & {\bf Kill} a group or topic.\\ + C-y & {\bf Yank} a group or topic.\\ + A T & List active-file using {\bf topics}.\\ + G p & Edit topic-{\bf parameters}.\\ + T M-n & Go to {\bf next} topic. [distance]\\ + T M-p & Go to {\bf previous} topic. [distance]\\ + \end{keys} + } + } + + \newcommand{\TopicSorting}{% + {\esamepage + \begin{keys}{T S m} + T S a & Sort {\bf alphabetically}.\\ + T S u & Sort by number of {\bf unread} articles.\\ + T S l & Sort by group {\bf level}.\\ + T S v & Sort by group score ({\bf value}).\\ + T S r & Sort by group {\bf rank}.\\ + T S m & Sort by {\bf method}.\\ + T S e & Sort by {\bf server} name.\\ + T S s & Sort according to `gnus-group-sort-function'.\\ + \end{keys} + With a prefix these commands will sort in reverse order. + } + } + + \newcommand{\SubscribeKillYankGroups}{% + {\esamepage + \begin{keys}{S C-k} + S k & (C-k) {\bf Kill} this group.\\ + S l & Set the {\bf level} of this group. [p/p]\\ + S s & (U) Prompt for a group and toggle its {\bf subscription}.\\ + S t & (u) {\bf Toggle} subscription to this group. [p/p]\\ + S w & (C-w) Kill all groups in the region.\\ + S y & (C-y) {\bf Yank} the last killed group.\\ + S z & Kill all {\bf zombie} groups.\\ + S C-k & Kill all groups on a certain level.\\ + \end{keys} + } + } + + \newcommand{\SummaryModeGeneral}{% + {\esamepage + \begin{keys}{M-RET} + SPC & (A SPC, A n) Select an article, scroll it one page, move to the + next one.\\ + DEL & (A DEL, A p, b) Scroll this article one page back. [distance]\\ + RET & (A RET) Scroll this article one line forward. [distance]\\ + M-RET & (A M-RET) Scroll this article one line backward. [distance]\\ + = & Expand the Summary window (fullsize). + [Prefix: shrink to display article window]\\ + % + \& & Execute a command on all articles whose header matches a regexp. + [Prefix: move backwards]\\ + M-\& & Execute a command on all articles having the process mark.\\ + % + M-n & (G M-n) Go to the {\bf next} summary line of an unread article. + [distance]\\ + M-p & (G M-p) Go to the {\bf previous} summary line of an unread article. + [distance]\\ + M-s & {\bf Search} through all subsequent articles for a regexp.\\ + M-r & Search through all previous articles for a regexp.\\ + % + A P & {\bf Postscript}-print current buffer.\\ + % + M-k & Edit this group's {\bf kill} file.\\ + M-K & Edit the general {\bf kill} file.\\ + % + C-t & Toggle {\bf truncation} of summary lines.\\ + Y g & Regenerate the summary-buffer.\\ + Y c & Insert all cached articles into the summary-buffer.\\ + % + M-C-e & {\bf Edit} the group-parameters.\\ + M-C-a & Customize the group-parameters.\\ + % + % article handling + % + A $<$ & ($<$, A b) Scroll to the beginning of this article.\\ + A $>$ & ($>$, A e) Scroll to the end of this article.\\ + A s & (s) Perform an i{\bf search} in the article buffer.\\ + % + A D & (C-d) Un{\bf digestify} this article into a separate group. + [Prefix: force digest]\\ + M-C-d & Like C-d, but open several documents in nndoc-groups, wrapped + in an nnvirtual group [p/p]\\ + % + A g & (g) (Re)fetch this article ({\bf get}). [Prefix: get raw version]\\ + A r & (\^{}, A \^{}) Fetch the parent(s) of this article. + [Prefix: if positive fetch \textit{n} ancestors; + negative: fetch only the \textit{n}th ancestor]\\ + A t & {\bf Translate} this article.\\ + A R & Fetch all articles mentioned in the {\bf References}-header.\\ + A T & Fetch full \textbf{thread} in which the current article appears.\\ + M-\^{} & Fetch the article with a given Message-ID.\\ + S y & {\bf Yank} the current article into an existing message-buffer. + [p/p]\\ + A M & Setup group parameters for {\bf mailing} lists from + headers. [Prefix: replace old settings]\\ + \end{keys} + } + } + + \newcommand{\MIMESummary}{% + {\esamepage + For the commands operating on one MIME part (a subset of gnus-article-*), a + prefix selects which part to operate on. If the point is placed over a + MIME button in the article buffer, use the corresponding bindings for the + article buffer instead. + + \begin{keys}{W M w} + K v & (b, W M b) {\bf View} the MIME-part.\\ + K o & {\bf Save} the MIME part.\\ + K c & {\bf Copy} the MIME part.\\ + K e & View the MIME part {\bf externally}.\\ + K i & View the MIME part {\bf internally}.\\ + K $\mid$ & Pipe the MIME part to an external command.\\ + K b & Make all the MIME parts have buttons in front of them.\\ + K m & Try to repair {\bf multipart-headers}.\\ + K C & View the MIME part using a different {\bf charset}.\\ + X m & Save all parts matching a MIME type to a directory. [p/p]\\ + M-t & Toggle the buttonized display of the article buffer.\\ + W M w & Decode RFC2047-encoded words in the article headers.\\ + W M c & Decode encoded article bodies. [Prefix: prompt for charset]\\ + W M v & View all MIME parts in the current article.\\ + \end{keys} + } + } + + \newcommand{\SortSummary}{% + {\esamepage + \begin{keys}{C-c C-s C-a} + C-c C-s C-a & Sort the summary-buffer by {\bf author}.\\ + % C-c C-s C-t & Sort the summary-buffer by {\bf recipient}.\\ % No Gnus + C-c C-s C-d & Sort the summary-buffer by {\bf date}.\\ + C-c C-s C-i & Sort the summary-buffer by article score.\\ + C-c C-s C-l & Sort the summary-buffer by amount of {\bf lines}.\\ + C-c C-s C-c & Sort the summary-buffer by length.\\ + C-c C-s C-n & Sort the summary-buffer by article {\bf number}.\\ + C-c C-s C-s & Sort the summary-buffer by {\bf subject}.\\ + C-c C-s C-r & Sort the summary-buffer {\bf randomly}.\\ + C-c C-s C-o & Sort the summary-buffer using the default method.\\ + \end{keys} + With a prefix these functions sort in reverse order. + } + } + + \newcommand{\MailGroups}{% formerly \Bsubmap + {\esamepage + These commands (except `B c') are only valid in a mail group.\\* + \begin{keys}{B M-C-e} + B DEL & (B backspace, B delete) {\bf Delete} the mail article from disk (!). + [p/p]\\ + B B & Crosspost this article to another group.\\ + B c & {\bf Copy} this article from any group to a mail group. [p/p]\\ + B e & {\bf Expire} all expirable articles in this group. [p/p]\\ + B i & {\bf Import} a random file into this group.\\ + B I & Create an empty article in this group.\\ + B m & {\bf Move} the article from one mail group to another. [p/p]\\ + B p & Query whether the article was {\bf posted} as well.\\ + B q & {\bf Query} where the article will end up after fancy splitting\\ + B r & {\bf Respool} this mail article. [p/p]\\ + B t & {\bf Trace} the fancy splitting patterns applied to this article.\\ + B w & (e) Edit this article.\\ + B M-C-e & {\bf Expunge} (delete from disk) all expirable articles in this group + (!). [p/p]\\ + K E & {\bf Encrypt} article body. [p/p]\\ + \end{keys} + } + } + + \newcommand{\DraftGroup}{% formerly \Dsubmap + {\esamepage + The ``drafts''-group contains messages that have been saved but not sent + and rejected articles. \\* + \begin{keys}{B DEL} + D e & \textbf{edit} message.\\ + D s & \textbf{Send} message. [p/p]\\ + D S & \textbf{Send} all messages.\\ + D t & \textbf{Toggle} sending (mark as unsendable).\\ + B DEL & \textbf{Delete} message (like in mailgroup).\\ + \end{keys} + } + } + + \newcommand{\SelectArticles}{% formerly \Gsubmap + {\esamepage + These commands select the target article. They do not understand the prefix.\\* + \begin{keys}{G C-n} + h & Enter article-buffer.\\ + G b & (,) Go to the {\bf best} article (the one with highest score).\\ + G f & (.) Go to the {\bf first} unread article.\\ + G n & (n) Go to the {\bf next} unread article.\\ + G p & (p) Go to the {\bf previous} unread article.\\ + % + G N & (N) Go to {\bf the} next article.\\ + G P & (P) Go to the {\bf previous} article.\\ + % + G C-n & (M-C-n) Go to the {\bf next} article with the same subject.\\ + G C-p & (M-C-p) Go to the {\bf previous} article with the same subject.\\ + % + G l & (l) Go to the previously read article ({\bf last-read-article}).\\ + G o & Pop an article off the summary history and go to it.\\ + % + G g & Search an article via subject.\\ + G j & (j) Search an article via Message-Id or subject.\\ + \end{keys} + } + } + + \newcommand{\ArticleModeGeneral}{% + {\esamepage + The normal navigation keys work in Article mode. Some additional keys are:\\ + \begin{keys}{C-c RET} + C-c \^{} & Get the article with the Message-ID near point.\\ + C-c RET & Send reply to address near point.\\ + h & Go to the \textbf{header}-line of the article in the + summary-buffer.\\ + s & Go to \textbf{summary}-buffer.\\ + RET & (middle mouse button) Activate the button at point to follow + an URL or Message-ID.\\ + TAB & Move the point to the next button.\\ + M-TAB & Move point to previous button.\\ + \end{keys} + } + } + + \newcommand{\WashArticle}{% formerly \Wsubmap + {\esamepage + \begin{keys}{W W H} + W 6 & Translate a base64 article.\\ + W a & Strip certain {\bf headers} from body.\\ + W b & Make Message-IDs and URLs in the article mouse-clickable + {\bf buttons}.\\ + W c & Translate CRLF-pairs to LF and then the remaining CR's to LF's.\\ + W d & Treat {\bf dumbquotes}.\\ + W e & Treat {\bf emphasized} text.\\ + W h & Treat {\bf HTML}.\\ + W l & (w) Remove page breaks ({\bf\^{}L}) from the article.\\ + W m & {\bf Morse} decode article.\\ + W o & Treat {\bf overstrike} or underline (\^{}H\_) in the article.\\ + W p & Verify X-{\bf PGP}-Sig header.\\ + W q & Treat {\bf quoted}-printable in the article.\\ + W r & (C-c C-r) Do a Caesar {\bf rotate} (rot13) on the article.\\ + W s & Verify (and decrypt) a {\bf signed} message.\\ + W t & (t) {\bf Toggle} display of all headers.\\ + W u & {\bf Unsplit} broken URLs.\\ + W v & (v) Toggle permanent {\bf verbose} displaying of all headers.\\ + W w & Do word {\bf wrap} in the article.\\ + W B & Add clickable {\bf buttons} to the article headers.\\ + W C & {\bf Capitalize} first word in each sentence.\\ + W Q & Fill long lines.\\ + W Z & Translate a HZ-encoded article.\\ + % + W G u & {\bf Unfold} folded header lines.\\ + W G f & {\bf Fold} all header lines.\\ + W G n & Unfold {\bf Newsgroups:} and Follow-Up-To:.\\ + % + W Y c & Repair broken {\bf citations}.\\ + W Y a & Repair broken {\bf attribution} lines.\\ + W Y u & {\bf Unwrap} broken citation lines.\\ + W Y f & Do a {\bf full} deuglification (W Y c, W Y a, W Y u).\\ + \end{keys} + } + } + + \newcommand{\BlankAndWhitespace}{% + {\esamepage + \begin{keys}{W E w} + W E l & Strip blank {\bf lines} from the beginning of the article.\\ + W E m & Replace blank lines with empty lines and remove {\bf multiple} + blank lines.\\ + W E t & Remove {\bf trailing} blank lines.\\ + W E a & Strip blank lines at the beginning and the end + (W E l, W E m and W E t).\\ + W E A & Strip {\bf all} blank lines.\\ + W E s & Strip leading blank lines from the article body.\\ + W E e & Strip trailing blank lines from the article body.\\ + W E w & Remove leading {\bf whitespace} from all headers.\\ + \end{keys} + } + } + + \newcommand{\Picons}{% + {\esamepage + \begin{keys}{W D D} + W D s & (W g) Display {\bf smilies}.\\ + W D x & (W f) Look for and display any X-{\bf Face} headers.\\ + W D d & Display any Face headers.\\ + W D n & Toggle picons in {\bf Newsgroups} and Followup-To.\\ + W D m & Toggle picons in {\bf mail} headers (To and Cc).\\ + W D f & Toggle picons in {\bf From}.\\ + W D D & Remove all images from the article buffer.\\ + \end{keys} + } + } + + \newcommand{\TimeAndDate}{% + {\esamepage + \begin{keys}{W T u} + W T u & (W T z) Display the article timestamp in GMT ({\bf UT, ZULU}).\\ + W T i & Display the article timestamp in {\bf ISO} 8601.\\ + W T l & Display the article timestamp in the {\bf local} timezone.\\ + W T s & Display according to `gnus-article-time-format'.\\ + W T e & Display the time {\bf elapsed} since it was sent.\\ + W T o & Display the {\bf original} timestamp.\\ + W T p & Display the date in format that's {\bf + pronounceable} in English.\\ + \end{keys} + } + } + + \newcommand{\HideHighlightArticle}{% + {\esamepage + \begin{keys}{W W C-c} + W W a & Hide {\bf all} unwanted parts. Calls W W h, W W s, W W C-c.\\ + W W h & Hide article {\bf headers}.\\ + W W b & Hide {\bf boring} headers.\\ + W W s & Hide {\bf signature}.\\ + W W l & Hide {\bf list} identifiers in subject-header.\\ + W W P & Hide {\bf PEM} (privacy enhanced messages).\\ + W W B & Hide banner specified by group parameter.\\ + W W c & Hide {\bf citation}.\\ + W W C-c & Hide {\bf citation} using a more intelligent algorithm.\\ + W W C & Hide cited text in articles that aren't roots.\\ + W H a & Highlight {\bf all} parts. Calls W b, W H c, W H h, W H s.\\ + W H c & Highlight article {\bf citations}.\\ + W H h & Highlight article {\bf headers}.\\ + W H s & Highlight article {\bf signature}.\\ + \end{keys} + For all hiding-commands: A positive prefix always hides, and a negative + prefix will show what was previously hidden. + }} + + \newcommand{\MIMEArticleMode}{% + {\esamepage + \begin{keys}{RET} + RET & (BUTTON-2) Toggle display of the MIME object.\\ + v & Prompt for a method and then view object using this method.\\ + o & Prompt for a filename and save the MIME object.\\ + C-o & Prompt for a filename to save the MIME object to and remove it.\\ + d & {\bf Delete} the MIME object.\\ + c & {\bf Copy} the MIME object to a new buffer and display this buffer.\\ + i & Display the MIME object in this buffer.\\ + C & Copy the MIME object to a new buffer and display this buffer using {\bf Charset} \\ + E & View internally. \\ + e & View {\bf externally}. \\ + t & View the MIME object as a different {\bf type}.\\ + p & {\bf Print} the MIME object.\\ + $\mid$ & Pipe the MIME object to a process.\\ + . & Take action on the MIME object.\\ + \end{keys} + } + } + + %% end of article mode for reading .......................................... + + \newcommand{\MarkArticlesGeneral}{% formerly \Msubmap + {\esamepage + \begin{keys}{M M-C-r} + d & (M d, M r) Mark this article as read and move to the next one. + [scope]\\ + D & Mark this article as read and move to the previous one. [scope]\\ + ! & (u, M !, M t) Tick this article (mark it as interesting) and move + to the next one. [scope]\\ + U & Tick this article and move to the previous one. [scope]\\ + M ? & (?) Mark this article as dormant (only followups are + interesting). [scope]\\ + M D & Show all {\bf dormant} articles (normally they are hidden unless they + have any followups).\\ + M M-D & Hide all {\bf dormant} articles.\\ + C-w & Mark all articles between point and mark as read.\\ + M-u & (M SPC, M c) Clear all marks from this article and move to the next + one. [scope]\\ + M-U & Clear all marks from this article and move to the previous one. + [scope]\\ + % + M e & (E, M x) Mark this article as {\bf expirable}. [scope]\\ + % + M k & (k) {\bf Kill} all articles with the same subject then select the + next unread one.\\ + M K & (C-k) {\bf Kill} all articles with the same subject as this one.\\ + % + M C & {\bf Catch-up} the articles that are not ticked and not dormant.\\ + M C-c & {\bf Catch-up} all articles in this group.\\ + M H & {\bf Catch-up} (mark read) this group to point (to-{\bf here}).\\ + % + M b & Set a {\bf bookmark} in this article.\\ + M B & Remove the {\bf bookmark} from this article.\\ + % + M M-r & (x) Expunge all {\bf read} articles from this group.\\ + M M-C-r & Expunge all articles having a given mark.\\ + M S & (C-c M-C-s) {\bf Show} all expunged articles.\\ + M M C-h & Displays some more keys doing ticking slightly differently.\\ + \end{keys} + The variable `gnus-summary-goto-unread' controls what happens after a mark + has been set (C-x C-i g Setting Marks RET) + }} + + \newcommand{\MarkByScore}{% + \begin{keys}{M V m} + M V c & {\bf Clear} all marks from all high-scored articles. [score]\\ + M V k & {\bf Kill} all low-scored articles. [score]\\ + M V m & Mark all high-scored articles with a given {\bf mark}. [score]\\ + M V u & Mark all high-scored articles as interesting (tick them). [score]\\ + \end{keys} + } + } + +\newcommand{\ProcessMark}{% + {\esamepage + These commands set and remove the process mark (\#). You only need to use + it if the set of articles you want to operate on is non-contiguous. Else + use a numeric prefix.\\* + \begin{keys}{M P R} + M P p & (\#, M \#) Mark this article.\\ + M P u & (M-\#, M M-\#) \textbf{unmark} this article.\\ + M P b & Mark all articles in {\bf buffer}.\\ + M P r & Mark all articles in the {\bf region}.\\ + M P g & Unmark all articles in the region.\\ + M P R & Mark all articles matching a {\bf regexp}.\\ + M P G & Unmark all articles matching a regexp.\\ + M P t & Mark all articles in this (sub){\bf thread}.\\ + M P T & Unmark all articles in this (sub){\bf thread}.\\ + M P s & Mark all articles in the current {\bf series}.\\ + M P S & Mark all {\bf series} that already contain a marked article.\\ + M P a & Mark {\bf all} articles (in series order).\\ + M P U & \textbf{unmark} all articles.\\ + M P i & {\bf Invert} the list of process-marked articles.\\ + M P k & Push the current process-mark set onto stack and unmark + all articles.\\ + M P y & Pop process-mark set from stack and restore it.\\ + M P w & Push process-mark set on the stack.\\ + M P v & Mark all articles with score over the default score. [Prefix: score]\\ + \end{keys} + } + } + +\newcommand{\Limiting}{% + {\esamepage + \begin{keys}{/M} + // & (/s) Limit the summary-buffer to articles matching {\bf subject}.\\ + /a & Limit the summary-buffer to articles matching {\bf author}.\\ + /x & Limit depending on ``extra'' headers.\\ + /u & (x) Limit to {\bf unread} articles. + [Prefix: also exclude ticked and dormant articles]\\ + /. & Limit to unseen articles.\\ + /m & Limit to articles marked with specified {\bf mark}.\\ + /t & Ask for a number and exclude articles younger than that many days. + [Prefix: exclude older articles]\\ + /n & Limit to current article. [p/p]\\ + /w & Pop the previous limit off the stack and restore it. + [Prefix: pop all limits]\\ + /v & Limit to score. [score]\\ + /E & (M S) Include all expunged articles in the limit.\\ + /D & Include all dormant articles in the limit.\\ + /* & Limit to cached articles.\\ + Y C & Include all cached articles in the limit.\\ + /d & Exclude all dormant articles from the limit.\\ + /M & Exclude all marked articles.\\ + /T & Include all articles from the current thread in the limit.\\ + /c & Exclude all dormant articles that have no children from the limit.\\ + /C & Mark all excluded unread articles as read. + [Prefix: also mark ticked and dormant articles]\\ + /o & Insert all {\bf old} articles. [Prefix: how many]\\ + /N & Insert all {\bf new} articles.\\ + /p & Limit to articles {\bf predicated} in the `display' group parameter.\\ + % /r & Limit to {\bf replied} articles. [Prefix: unreplied]\\ % No Gnus + \end{keys} + } + } + +\newcommand{\OutputArticles}{% formerly \Osubmap + {\esamepage + \begin{keys}{O m} + O o & (o, C-o) Save this article using the default article saver. [p/p]\\ + O b & Save this article's {\bf body} in plain file format [p/p]\\ + O f & Save this article in plain {\bf file} format. [p/p]\\ + O F & like O f, but overwrite file's contents. [p/p]\\ + O h & Save this article in {\bf mh} folder format. [p/p]\\ + O m & Save this article in {\bf mail} format. [p/p]\\ + O r & Save this article in {\bf rmail} format. [p/p]\\ + O v & Save this article in {\bf vm} format. [p/p]\\ + O p & ($\mid$) {\bf Pipe} this article to a shell command. [p/p]\\ + O P & \textbf{Print} this article using Muttprint. [p/p]\\ + \end{keys} + } + } + +\newcommand{\PostReplyetc}{% formerly \Ssubmap + {\esamepage + These commands put you in a separate news or mail buffer. See the section + about composing messages for more information.\\* + %After + %editing the article, send it by pressing C-c C-c. If you are in a + %foreign group and want to post the article using the foreign server, give + %a prefix to C-c C-c.\\* + \begin{keys}{S O m} + S p & (a) {\bf Post} an article to this group.\\ + S f & (f) Post a {\bf followup} to this article.\\ + S F & (F) Post a {\bf followup} and include the original. [p/p]\\ + S o p & Forward this article as a {\bf post} to a newsgroup.\\ + S M-c & Send a complaint about excessive crossposting to the author of this + article. [p/p]\\ + % + S m & (m) Send a {\bf mail} to some other person.\\ + S r & (r) Mail a {\bf reply} to the author of this article.\\ + S R & (R) Mail a {\bf reply} and include the original. [p/p]\\ + S B r & Like S r but ignore the Reply-To: header.\\ + S B R & Like S R but ignore the Reply-To: header.\\ + S w & Mail a {\bf wide} reply to this article.\\ + S W & Mail a {\bf wide} reply to this article and include + the original.\\ + S v & Mail a {\bf very} wide reply to this article.\\ + S V & Mail a {\bf very} wide reply to this article and include the original.\\ + S o m & (C-c C-f) Forward this article by {\bf mail} to a person.\\ + S D b & Resend {\bf bounced} mail.\\ + S D r & {\bf Resend} mail to a different person.\\ + S D e & {\bf Edit} and resend.\\ + % + S n & Post a followup via {\bf news} even if you got the message + through mail.\\ + S N & Post a followup via {\bf news} and include the original mail. + [p/p]\\ + % + S c & (C) {\bf Cancel} this article (only works if it is + your own). [p/p]\\ + S s & {\bf Supersede} this article with a new one (only for own + articles).\\ + % + S O m & Digest these series and forward by {\bf mail}. [p/p]\\ + S O p & Digest these series and forward as a {\bf post} to a newsgroup. + [p/p]\\ + % + S u & {\bf Uuencode} a file and post it as a series.\\ + \end{keys} + If you want to cancel or supersede an article you just posted (before it + has appeared on the server), go to the *post-news* buffer, change + `Message-ID' to `Cancel' or `Supersedes' and send it again with C-c C-c. + }} + +\newcommand{\Threading}{% formerly \Tsubmap + {\esamepage + \begin{keys}{T M-\#} + T \# & Mark this thread with the process mark.\\ + T M-\# & Remove process-marks from this thread.\\ + % + T t & Re-{\bf thread} the current article's thread.\\ + T \^{} & Make the current article child of the marked (or previous) article.\\ + % movement + T n & (M-C-f, M-down) Go to the {\bf next} thread. [distance]\\ + T p & (M-C-b, M-up) Go to the {\bf previous} thread. [distance]\\ + T d & {\bf Descend} this thread. [distance]\\ + T u & Ascend this thread ({\bf up}-thread). [distance]\\ + T o & Go to the top of this thread.\\ + % + T s & {\bf Show} the thread hidden under this article.\\ + T h & {\bf Hide} this (sub)thread.\\ + % + T i & {\bf Increase} the score of this thread.\\ + T l & (M-C-l) {\bf Lower} the score of this thread.\\ + % + T k & (M-C-k) {\bf Kill} the current (sub)thread. [Negative prefix: + tick it, positive prefix: unmark it.]\\ + % + T H & {\bf Hide} all threads.\\ + T S & {\bf Show} all hidden threads.\\ + T T & (M-C-t) {\bf Toggle} threading.\\ + \end{keys} + } + } + +\newcommand{\Scoring}{% formerly \Vsubmap + {\esamepage + Read about Adaptive Scoring in the online info.\\* + \begin{keys}{\bf A p m l} + V a & {\bf Add} a new score entry, specifying all elements.\\ + V c & Specify a new score file as {\bf current}.\\ + V e & {\bf Edit} the current score alist.\\ + V f & Edit a score {\bf file} and make it the current one.\\ + V m & {\bf Mark} all articles below a given score as read.\\ + V s & Set the {\bf score} of this article.\\ + V t & Display all score rules applied to this article ({\bf track}).\\ + W w & List {\bf words} used in scoring.\\ + V x & {\bf Expunge} all low-scored articles. [score]\\ + V C & {\bf Customize} the current score file through a user-friendly + interface.\\ + V F & {\bf Flush} the cache of score files.\\ + V R & {\bf Re-score} the summary buffer.\\ + V S & Display the {\bf score} of this article.\\ + \bf A p m l& Make a scoring entry based on this article.\\ + \end{keys} + The four letters stand for:\\* + \quad \B{A}ction: I)ncrease, L)ower;\\* + \quad \B{p}art: a)uthor (from), s)ubject, x)refs (cross-posting), d)ate, l)ines, + message-i)d, t)references (parent), f)ollowup, b)ody, h)ead (all headers);\\* + \quad \B{m}atch type:\\* + \qquad string: s)ubstring, e)xact, r)egexp, f)uzzy,\\* + \qquad date: b)efore, a)t, n)this,\\* + \qquad number: $<$, =, $>$;\\* + \quad \B{l}ifetime: t)emporary, p)ermanent, i)mmediate. + + If you type the second letter in uppercase, the remaining two are assumed + to be s)ubstring and t)emporary. + If you type the third letter in uppercase, the last one is assumed to be + t)emporary. + + \quad Extra keys for manual editing of a score file:\\* + \begin{keys}{C-c C-c} + C-c C-c & Finish editing the score file.\\ + C-c C-d & Insert the current {\bf date} as number of days.\\ + \end{keys} + } + } + +\newcommand{\ExtractSeries}{% formerly \Xsubmap + {\esamepage + Gnus recognizes if the current article is part of a series (multipart + posting whose parts are identified by numbers in their subjects, e.g.{} + 1/10\dots10/10) and processes the series accordingly. You can mark and + process more than one series at a time. If the posting contains any + archives, they are expanded and gathered in a new group.\\* + \begin{keys}{X p} + X b & Un-{\bf binhex} these series. [p/p]\\ + X o & Simply {\bf output} these series (no decoding). [p/p]\\ + X p & Unpack these {\bf postscript} series. [p/p]\\ + X s & Un-{\bf shar} these series. [p/p]\\ + X u & {\bf Uudecode} these series. [p/p]\\ + \end{keys} + + Each one of these commands has four variants:\\* + \begin{keys}{X v \bf Z} + X \bf z & Decode these series. [p/p]\\ + X \bf Z & Decode and save these series. [p/p]\\ + X v \bf z & Decode and view these series. [p/p]\\ + X v \bf Z & Decode, save and view these series. [p/p]\\ + \end{keys} + where {\bf z} or {\bf Z} identifies the decoding method (b, o, p, s, u). + + An alternative binding for the most-often used of these commands is\\* + \begin{keys}{C-c C-v C-v} + C-c C-v C-v & (X v u) Uudecode and view these series. [p/p]\\ + \end{keys} + }} + +\newcommand{\ExitSummary}{% formerly \Zsubmap + {\esamepage + \begin{keys}{Z G} + Z Z & (q, Z Q) Exit this group.\\ + Z E & (Q) {\bf Exit} without updating the group information.\\ + % + Z c & (c) Mark all unticked articles as read ({\bf catch-up}) and exit.\\ + Z C & Mark all articles as read ({\bf catch-up}) and exit.\\ + % + Z n & Mark all articles as read and go to the {\bf next} group.\\ + Z N & Exit and go to {\bf the} next group.\\ + Z P & Exit and go to the {\bf previous} group.\\ + % + Z G & (M-g) Check for new articles in this group ({\bf get}).\\ + Z R & (C-x C-s) Exit this group, and then enter it again ({\bf reenter}). + [Prefix: select all articles, read and unread.]\\ + Z s & Update and save the dribble buffer. [Prefix: save .newsrc* as well]\\ + \end{keys} + } + } + +\newcommand{\MsgCompositionGeneral}{% + Press C-c ? in the composition-buffer to get this information.\\* + {\esamepage + \begin{keys}{C-c C-m} + % sending + C-c C-c & Send message and exit. [Prefix: send via foreign server]\\ + C-c C-s & Send message. [Prefix: send via foreign server]\\ + C-c C-d & Don't send message (save as \textbf{draft}).\\ + C-c C-k & \textbf{Kill} message-buffer.\\ + C-c C-m & {\bf Mail} reply to the address near point. + [Prefix: include the original]\\ + % modify headers/body + C-c C-o & Sort headers.\\ + C-c C-e & \textbf{Elide} region.\\ + C-c C-v & Kill everything outside region.\\ + C-c C-r & Do a \textbf{Rot-13} on the body.\\ + C-c C-w & Insert signature (from `message-signature-file').\\ + C-c C-z & Kill everything up to signature.\\ + C-c C-y & \textbf{Yank} original message.\\ + C-c C-q & Fill the yanked message.\\ + C-c M-C-y & \textbf{Yank} a buffer and quote it.\\ + M-RET & Insert four newlines and format quoted text. [Prefix: + justify as well]\\ + C-c M-r & \textbf{Rename} message buffer. [Prefix: ask for new name]\\ + \end{keys} + } + } + +\newcommand{\MsgCompositionMovementArticle}{% + The following functions create the header-field if necessary.\\* + {\esamepage + \begin{keys}{C-c C-f C-u} + C-c TAB & Move to \textbf{signature}.\\ + C-c C-b & Move to \textbf{body}.\\ + C-c C-f C-t & (C-c C-t) Move to \textbf{To:}.\\ + C-c C-f C-c & Move to \textbf{Cc:}.\\ + C-c C-f C-b & Move to \textbf{Bcc:}.\\ + C-c C-f C-w & Move to \textbf{Fcc:}.\\ + C-c C-f C-s & Move to \textbf{Subject:}.\\ + C-c C-f C-r & Move to \textbf{Reply-To:}.\\ + C-c C-f C-f & Move to \textbf{Followup-To:}.\\ + C-c C-f C-n & (C-c C-n) Move to \textbf{Newsgroups:}.\\ + C-c C-f C-u & Move to \textbf{Summary:}.\\ + C-c C-f C-k & Move to \textbf{Keywords:}.\\ + C-c C-f C-d & Move to \textbf{Distribution:}.\\ + C-c C-f C-m & Move to \textbf{Mail-Followup-To:}.\\ + C-c C-f C-o & Move to \textbf{From:}.\\ + C-c C-f C-a & Insert a reasonable \textbf{Mail-Followup-To:} for + an unsubscribed list. [Prefix: include addresses in \textbf{Cc:}]\\ + C-c C-f TAB & (C-c C-u) Move to \textbf{Importance:}.\\ + C-c M-n & Insert \textbf{Disposition-Notification-To:} + (request receipt).\\ + \end{keys} + } + } + +\newcommand{\MsgCompositionMML}{% + {\esamepage + \begin{keys}{C-c C-m P} + C-c C-m f & (C-c C-a) Attach \textbf{file}.\\ + C-c C-m b & Attach contents of \textbf{buffer}.\\ + C-c C-m e & Attach \textbf{external} file (ftp..).\\ + C-c C-m P & Create MIME-\textbf{preview} (new + buffer). [Prefix: show raw MIME preview]\\ + C-c C-m v & \textbf{Validate} article.\\ + C-c C-m p & Insert \textbf{part}.\\ + C-c C-m m & Insert \textbf{multi}-part.\\ + C-c C-m q & \textbf{Quote} region.\\ + C-c C-m c s & Encrypt message using \textbf{S/MIME}.\\ + C-c C-m c o & Encrypt message using PGP.\\ + C-c C-m c p & Encrypt message using \textbf{PGP/MIME}.\\ + C-c C-m s s & Sign message using \textbf{S/MIME}.\\ + C-c C-m s o & Sign message using PGP.\\ + C-c C-m s p & Sign message using \textbf{PGP/MIME}.\\ + C-c C-m C-n & Remove security related MML tags from message.\\ + % TODO: narrow headers (C-c C-m n) ? + \end{keys} + } + } + +%% TODO: +\newcommand{\ServerMode}{% + {\esamepage + To enter this mode, press \^{} while in Group mode.\\* + \begin{keys}{SPC} + SPC & (RET) Browse this server.\\ + a & {\bf Add} a new server.\\ + c & {\bf Copy} this server.\\ + e & {\bf Edit} a server.\\ + k & {\bf Kill} this server. [scope]\\ + l & {\bf List} all servers.\\ + q & Return to the group buffer ({\bf quit}).\\ + s & Request that the server scan its sources for new articles.\\ + g & Request that the server regenerate its data.\\ + y & {\bf Yank} the previously killed server.\\ + O & Try to {\bf open} a connection to this server.\\ + C & {\bf Close} connection to this server.\\ + D & Mark this server as unreachable ({\bf deny}).\\ + M-o & {\bf Open} the connection to all servers.\\ + M-c & {\bf Close} the connection to all servers.\\ + R & Make all denied servers into closed servers.\\ + L & Set server status to offline.\\ + \end{keys} + } + } + +\newcommand{\BrowseServer}{% + {\esamepage + To enter this mode, press `B' while in Group mode.\\* + \begin{keys}{RET} + RET & Enter the current group.\\ + SPC & Enter the current group and display the first article.\\ + ? & Give a very short help message.\\ + n & Go to the {\bf next} group. [distance]\\ + p & Go to the {\bf previous} group. [distance]\\ + q & (l) {\bf Quit} browse mode.\\ + u & Subscribe to the current group. [scope]\\ + \end{keys} + } + } + +\newcommand{\GroupUnplugged}{% + {\esamepage + \begin{keys}{J S} + J j & Toggle plugged-state.\\ + J s & Fetch articles from all groups for offline-reading.\\ + J u & Fetch all eligible articles from this group.\\ + J S & \textbf{Send} all sendable messages in the drafts group.\\ + % + J c & Enter \textbf{category} buffer.\\ + J a & \textbf{Add} this group to an Agent category [p/p].\\ + J r & \textbf{Remove} this group from its Agent category [p/p].\\ + J Y & Synchronize flags changed while unplugged with remote server.\\ + \end{keys} + } + } + +\newcommand{\SummaryUnplugged}{% + {\esamepage + \begin{keys}{J M-\#} + J \# & \textbf{Mark} the article for downloading.\\ + J M-\# & \textbf{Unmark} the article for downloading.\\ + @ & \textbf{Toggle} whether to download the article.\\ + J c & Mark all undownloaded articles as read (\textbf{catch-up}).\\ + J u & Download all downloadable articles from group.\\ + \end{keys} + } + } + +\newcommand{\ServerUnplugged}{% + {\esamepage + \begin{keys}{J a} + J a & \textbf{Add} the current server to the list of servers covered + by the agent.\\ + J r & \textbf{Remove} the current server from the list of servers covered + by the agent.\\ + \end{keys} + } + } + +% end {gnusref} % % % % % % % % % % % % % % % % % % % % % % % % % % + + +% o some things might not be updated: scoring and server modes, maybe more +% o Gnus Unplugged category-buffer commands need to be written + +\begin{document} + +\ifthenelse{\isundefined{\booklettrue}}{ % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + \raggedbottom\raggedright + \twocolumn + % use \tiny to shrink it to 4 pages (needs a high-resolution printer though) + % \tiny + \scriptsize + \pagestyle{plain} + \Title + \par + \Logo{refcard} +}{ + \setcounter{page}{0} + \thispagestyle{empty} + \vspace*{\fill} + \Title + \vspace{0.4in} + \Logo{booklet} + \vspace*{\fill} + \pagebreak +}%ifbooklet% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% TODO: how does this work ? +%\tableofcontents + +\Notes +% + +\section*{Group-Mode} +\GroupModeGeneral + \subsection*{Group Subscribedness-Levels} + \GroupLevels + \subsection*{List Groups} + \ListGroups + \subsection*{Create/Edit Foreign Groups} + \CreateEditGroups + \subsection*{Unsubscribe, Kill and Yank Groups} + \SubscribeKillYankGroups + \subsection*{Mark Groups} + \MarkGroups + \subsection*{Group-Unplugged} + \GroupUnplugged +% topics in group-mode + \subsection*{Group Topics} + \GroupTopicsGeneral + \subsubsection*{Topic Sorting} + \TopicSorting + +% \ifthenelse{\isundefined{\booklettrue}}{}{\pagebreak} + +% summary-mode +\section*{Summary Mode} +\SummaryModeGeneral + \subsection*{Select Articles} + \SelectArticles +% + \subsection*{Threading} + \Threading +% + \subsection*{Limiting} + \Limiting + \subsection*{Sort the Summary-Buffer} + \SortSummary + \subsection*{Score (Value) Commands} + \Scoring + +\ifthenelse{\isundefined{\booklettrue}}{% ifcard %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + \subsection*{Output Articles} + \OutputArticles + \subsection*{Extract Series (Uudecode etc)} + \ExtractSeries +}{}%ifcard% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + + \subsection*{MIME operations from the Summary-Buffer} + \MIMESummary + +\ifthenelse{\isundefined{\booklettrue}}{}{% ifbooklet %%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + \subsection*{Extract Series (Uudecode etc)} + \ExtractSeries + \subsection*{Output Articles} + \OutputArticles +}%ifbooklet% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% + \subsection*{Post, Followup, Reply, Forward, Cancel} + \PostReplyetc + +\ifthenelse{\isundefined{\booklettrue}}{\newpage}{}% newpage ifcard + + \subsection*{Message Composition} + + \MsgCompositionGeneral + \subsubsection*{Jumping in message-buffer} + \MsgCompositionMovementArticle + \subsubsection*{Attachments/MML} + \MsgCompositionMML +% marking articles + \subsection*{Mark Articles} + \MarkArticlesGeneral + \subsubsection*{Mark Based on Score} + \MarkByScore + \subsubsection*{The Process Mark} + \ProcessMark + \subsubsection*{Mark Indication-Characters} + \MarkCharacters +% +\ifthenelse{\isundefined{\booklettrue}}{\newpage}{}% + + \subsection*{Summary-Unplugged} + \SummaryUnplugged + \subsection*{Mail-Group Commands} + \MailGroups + \subsection*{Draft-Group Commands} + \DraftGroup +% exiting + \subsection*{Exit the Summary-Buffer} + \ExitSummary +% +% +\section*{Article Mode (reading)} +\ArticleModeGeneral + \subsection*{Wash the Article-Buffer} + \WashArticle + \subsubsection*{Blank Lines and Whitespace} + \BlankAndWhitespace + \subsubsection*{Picons, X-faces, Smileys} + \Picons + \subsubsection*{Time and Date} + \TimeAndDate + \subsection*{Hide/Highlight Parts of the Article} + \HideHighlightArticle + \subsection*{MIME operations from the Article-Buffer (reading)} + \MIMEArticleMode +% +% +\section*{Server Mode} +\ServerMode + \subsection*{Unplugged-Server} + \ServerUnplugged +% +% +\section*{Browse Server Mode} +\BrowseServer + +%\pagebreak +\vspace*{\fill} +\Copyright + +\end{document} + +%%% Local Variables: +%%% mode: latex +%%% TeX-master: t +%%% End: + +% arch-tag: be438b0e-6832-4afb-8c56-5f84743e5cd1