Mercurial > emacs

--- a/lisp/dired.el	Wed Jun 09 01:04:28 2004 +0000
+++ b/lisp/dired.el	Wed Jun 09 01:10:14 2004 +0000
@@ -3036,244 +3036,6 @@
 	    ;; listing:
 	    (list (car (reverse dired-subdir-alist))))))))

-;; To make this file smaller, the less common commands
-;; go in a separate file.  But autoload them here
-;; to make the separation invisible.
-
-(autoload 'dired-diff "dired-aux"
-  "Compare file at point with file FILE using `diff'.
-FILE defaults to the file at the mark.  (That's the mark set by
-\\[set-mark-command], not by Dired's \\[dired-mark] command.)
-The prompted-for file is the first file given to `diff'."
-  t)
-
-(autoload 'dired-backup-diff "dired-aux"
-  "Diff this file with its backup file or vice versa.
-Uses the latest backup, if there are several numerical backups.
-If this file is a backup, diff it with its original.
-The backup file is the first file given to `diff'."
-  t)
-
-(autoload 'dired-clean-directory "dired-aux"
-  "Flag numerical backups for deletion.
-Spares `dired-kept-versions' latest versions, and `kept-old-versions' oldest.
-Positive prefix arg KEEP overrides `dired-kept-versions';
-Negative prefix arg KEEP overrides `kept-old-versions' with KEEP made positive.
-
-To clear the flags on these files, you can use \\[dired-flag-backup-files]
-with a prefix argument."
-  t)
-
-(autoload 'dired-do-chmod "dired-aux"
-  "Change the mode of the marked (or next ARG) files.
-This calls chmod, thus symbolic modes like `g+w' are allowed."
-  t)
-
-(autoload 'dired-do-chgrp "dired-aux"
-  "Change the group of the marked (or next ARG) files."
-  t)
-
-(autoload 'dired-do-chown "dired-aux"
-  "Change the owner of the marked (or next ARG) files."
-  t)
-
-(autoload 'dired-do-touch "dired-aux"
-  "Change the timestamp of the marked (or next ARG) files."
-  t)
-
-(autoload 'dired-do-print "dired-aux"
-  "Print the marked (or next ARG) files.
-Uses the shell command coming from variables `lpr-command' and
-`lpr-switches' as default."
-  t)
-
-(autoload 'dired-do-shell-command "dired-aux"
-  "Run a shell command COMMAND on the marked files.
-If no files are marked or a specific numeric prefix arg is given,
-the next ARG files are used.  Just \\[universal-argument] means the current file.
-The prompt mentions the file(s) or the marker, as appropriate.
-
-If there is a `*' in COMMAND, surrounded by whitespace, this runs
-COMMAND just once with the entire file list substituted there.
-
-If there is no `*', but there is a `?' in COMMAND, surrounded by
-whitespace, this runs COMMAND on each file individually with the
-file name substituted for `?'.
-
-Otherwise, this runs COMMAND on each file individually with the
-file name added at the end of COMMAND (separated by a space).
-
-`*' and `?' when not surrounded by whitespace have no special
-significance for `dired-do-shell-command', and are passed through
-normally to the shell, but you must confirm first.  To pass `*' by
-itself to the shell as a wildcard, type `*\"\"'.
-
-If COMMAND produces output, it goes to a separate buffer.
-
-This feature does not try to redisplay Dired buffers afterward, as
-there's no telling what files COMMAND may have changed.
-Type \\[dired-do-redisplay] to redisplay the marked files.
-
-When COMMAND runs, its working directory is the top-level directory of
-the Dired buffer, so output files usually are created there instead of
-in a subdir.
-
-In a noninteractive call (from Lisp code), you must specify
-the list of file names explicitly with the FILE-LIST argument."
-  t)
-
-(autoload 'dired-do-kill-lines "dired-aux"
-  "Kill all marked lines (not the files).
-With a prefix arg, kill all lines not marked or flagged."
-  t)
-
-(autoload 'dired-do-compress "dired-aux"
-  "Compress or uncompress marked (or next ARG) files."
-  t)
-
-(autoload 'dired-do-byte-compile "dired-aux"
-  "Byte compile marked (or next ARG) Emacs Lisp files."
-  t)
-
-(autoload 'dired-do-load "dired-aux"
-  "Load the marked (or next ARG) Emacs Lisp files."
-  t)
-
-(autoload 'dired-do-redisplay "dired-aux"
-  "Redisplay all marked (or next ARG) files.
-If on a subdir line, redisplay that subdirectory.  In that case,
-a prefix arg lets you edit the `ls' switches used for the new listing."
-  t)
-
-(autoload 'dired-create-directory "dired-aux"
-  "Create a directory called DIRECTORY."
-  t)
-
-(autoload 'dired-do-copy "dired-aux"
-  "Copy all marked (or next ARG) files, or copy the current file.
-Thus, a zero prefix argument copies nothing.  But it toggles the
-variable `dired-copy-preserve-time' (which see)."
-  t)
-
-(autoload 'dired-do-symlink "dired-aux"
-  "Make symbolic links to current file or all marked (or next ARG) files.
-When operating on just the current file, you specify the new name.
-When operating on multiple or marked files, you specify a directory
-and new symbolic links are made in that directory
-with the same names that the files currently have."
-  t)
-
-(autoload 'dired-do-hardlink "dired-aux"
-  "Add names (hard links) current file or all marked (or next ARG) files.
-When operating on just the current file, you specify the new name.
-When operating on multiple or marked files, you specify a directory
-and new hard links are made in that directory
-with the same names that the files currently have."
-  t)
-
-(autoload 'dired-do-rename "dired-aux"
-  "Rename current file or all marked (or next ARG) files.
-When renaming just the current file, you specify the new name.
-When renaming multiple or marked files, you specify a directory."
-  t)
-
-(autoload 'dired-do-rename-regexp "dired-aux"
-  "Rename marked files containing REGEXP to NEWNAME.
-As each match is found, the user must type a character saying
-  what to do with it.  For directions, type \\[help-command] at that time.
-NEWNAME may contain \\=\\<n> or \\& as in `query-replace-regexp'.
-REGEXP defaults to the last regexp used.
-With a zero prefix arg, renaming by regexp affects the full file name;
-usually only the non-directory part of file names is used and changed."
-  t)
-
-(autoload 'dired-do-copy-regexp "dired-aux"
-  "Copy all marked files containing REGEXP to NEWNAME.
-See function `dired-do-rename-regexp' for more info."
-  t)
-
-(autoload 'dired-do-hardlink-regexp "dired-aux"
-  "Hardlink all marked files containing REGEXP to NEWNAME.
-See function `dired-do-rename-regexp' for more info."
-  t)
-
-(autoload 'dired-do-symlink-regexp "dired-aux"
-  "Symlink all marked files containing REGEXP to NEWNAME.
-See function `dired-do-rename-regexp' for more info."
-  t)
-
-(autoload 'dired-upcase "dired-aux"
-  "Rename all marked (or next ARG) files to upper case."
-  t)
-
-(autoload 'dired-downcase "dired-aux"
-  "Rename all marked (or next ARG) files to lower case."
-  t)
-
-(autoload 'dired-maybe-insert-subdir "dired-aux"
-  "Insert this subdirectory into the same dired buffer.
-If it is already present, just move to it (type \\[dired-do-redisplay] to refresh),
-  else inserts it at its natural place (as `ls -lR' would have done).
-With a prefix arg, you may edit the ls switches used for this listing.
-  You can add `R' to the switches to expand the whole tree starting at
-  this subdirectory.
-This function takes some pains to conform to `ls -lR' output."
-  t)
-
-(autoload 'dired-next-subdir "dired-aux"
-  "Go to next subdirectory, regardless of level."
-  t)
-
-(autoload 'dired-prev-subdir "dired-aux"
-  "Go to previous subdirectory, regardless of level.
-When called interactively and not on a subdir line, go to this subdir's line."
-  t)
-
-(autoload 'dired-goto-subdir "dired-aux"
-  "Go to end of header line of DIR in this dired buffer.
-Return value of point on success, otherwise return nil.
-The next char is either \\n, or \\r if DIR is hidden."
-  t)
-
-(autoload 'dired-mark-subdir-files "dired-aux"
-  "Mark all files except `.' and `..'."
-  t)
-
-(autoload 'dired-kill-subdir "dired-aux"
-  "Remove all lines of current subdirectory.
-Lower levels are unaffected."
-  t)
-
-(autoload 'dired-tree-up "dired-aux"
-  "Go up ARG levels in the dired tree."
-  t)
-
-(autoload 'dired-tree-down "dired-aux"
-  "Go down in the dired tree."
-  t)
-
-(autoload 'dired-hide-subdir "dired-aux"
-  "Hide or unhide the current subdirectory and move to next directory.
-Optional prefix arg is a repeat factor.
-Use \\[dired-hide-all] to (un)hide all directories."
-  t)
-
-(autoload 'dired-hide-all "dired-aux"
-  "Hide all subdirectories, leaving only their header lines.
-If there is already something hidden, make everything visible again.
-Use \\[dired-hide-subdir] to (un)hide a particular subdirectory."
-  t)
-
-(autoload 'dired-show-file-type "dired-aux"
-  "Print the type of FILE, according to the `file' command.
-If FILE is a symbolic link and the optional argument DEREF-SYMLINKS is
-true then the type of the file linked to by FILE is printed instead."
-  t)
-
-(autoload 'dired-run-shell-command "dired-aux")
-
-(autoload 'dired-query "dired-aux")
-

 ;;;;  Drag and drop support