Mercurial > emacs
changeset 84034:e44d309653c3
Move to ../doc/lispref
| author | Glenn Morris <rgm@gnu.org> |
|---|---|
| date | Thu, 06 Sep 2007 04:15:05 +0000 |
| parents | 52ef29977fe9 |
| children | c4e4bacee37a |
| files | lispref/two-volume.make |
| diffstat | 1 files changed, 0 insertions(+), 227 deletions(-) [+] |
line wrap: on
line diff
--- a/lispref/two-volume.make Thu Sep 06 04:14:59 2007 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,227 +0,0 @@ -# Copyright 2007 Free Software Foundation, Inc. -# See end for copying conditions. - -# although it would be nice to use tex rather than pdftex to avoid -# colors, spurious warnings about names being referenced but not -# existing, etc., dvips | ps2pdf doesn't preserve the page size. -# Instead of creating a special dvips config file, put up with the warnings. -tex = pdftex -interaction=nonstopmode - -all: vol1.pdf vol2.pdf - -# vol1.texi and vol2.texi specially define \tocreadfilename so we can -# use our premade .toc's. -# -vol1.pdf: elisp1med-fns-ready elisp1med-aux-ready elisp1med-toc-ready - @echo -e "\f Final TeX run for volume 1..." - cp elisp1med-toc-ready elisp1-toc-ready.toc - cp elisp1med-fns-ready vol1.fns - cp elisp1med-aux-ready vol1.aux - $(tex) vol1.texi -# -vol2.pdf: elisp2med-fns-ready elisp2med-aux-ready elisp2med-toc-ready - @echo "Final TeX run for volume 2..." - cp elisp2med-toc-ready elisp2-toc-ready.toc - cp elisp2med-fns-ready vol2.fns - cp elisp2med-aux-ready vol2.aux - $(tex) vol2.texi - -# intermediate toc files. -# -# vol1 toc: volume 1, page break, volume 2 (with II: prepended). -elisp1med-toc-ready: elisp1med-init elisp2med-init - echo '@unnchapentry{@b{Volume 1}}{10001}{vol1}{}' >$@ - cat elisp1med-toc >>$@ - echo '@page' >>$@ - echo '@unnchapentry{@b{Volume 2}}{10001}{vol2}{}' >>$@ - sed 's/{\([^}]*\)}$$/{II:\1}/' elisp2med-toc >>$@ -# -# vol2 toc: volume 1 (with I: prepended), page break, volume 2. -elisp2med-toc-ready: elisp1med-init elisp2med-init - echo '@unnchapentry{@b{Volume 1}}{10001}{vol1}{}' >$@ - sed 's/{\([^}]*\)}$$/{I:\1}/' elisp1med-toc >>$@ - echo '@page' >>$@ - echo '@unnchapentry{@b{Volume 2}}{10001}{vol2}{}' >>$@ - cat elisp2med-toc >>$@ - - -# intermediate aux files. -# -# append vol2's fixed aux to normal vol1. -elisp1med-aux-ready: elisp2med-aux-vol-added - cat elisp1med-aux $< >$@ -# -# prepend vol1's fixed aux to vol2. -elisp2med-aux-ready: elisp1med-aux-vol-added - cat $< elisp2med-aux >$@ - -# on -pg entries, append volume number after page number. -elisp1med-aux-vol-added: elisp1med-init - sed 's/-pg}{\(.*\)}$$/-pg}{\1, vol.@tie1}/' elisp1med-aux >$@ -# -elisp2med-aux-vol-added: elisp2med-init - sed 's/-pg}{\(.*\)}$$/-pg}{\1, vol.@tie2}/' elisp2med-aux >$@ - - - -# intermediate index (fns) file. -# -elisp1med-fns-ready: elisp1med-fn-vol-added elisp2med-fn-vol-added - cat elisp2med-fn-vol-added >>vol1.fn - texindex vol1.fn - cp vol1.fns $@ -# -elisp2med-fns-ready: elisp1med-fn-vol-added elisp2med-fn-vol-added - cat elisp1med-fn-vol-added >>vol2.fn - texindex vol2.fn - cp vol2.fns $@ - -# Insert volume number (I: or II:) into index file. -elisp1med-fn-vol-added: elisp1med-init - cp vol1.fn elisp1med-fn - sed 's/}{/}{I:/' elisp1med-fn >$@ -# -elisp2med-fn-vol-added: elisp2med-init - cp vol2.fn elisp2med-fn - sed 's/}{/}{II:/' elisp2med-fn >$@ - -# ----------------------------------------------------------------------------- -# everything above is essentially a duplicate of everything below. sorry. -# ----------------------------------------------------------------------------- - -# intermediate TeX runs. -# -# this generates what would be the final versions -- except the page -# numbers aren't right. The process of adding the I: and II: changes -# the page breaks, so a few index entries, at least are wrong. (In -# 2007, x-meta-keysym in vol.II ended up on page 374 when the index had -# it on page 375 from the initial run.) -# -# So, we start all over again, from these fns/aux/toc files. -# -elisp1med-init: elisp1-fns-ready elisp1-aux-ready elisp1init-toc-ready texinfo.tex - @echo -e "\f Intermediate TeX run for volume 1..." - cp elisp1init-toc-ready elisp1-toc-ready.toc - cp elisp1-fns-ready vol1.fns - cp elisp1-aux-ready vol1.aux - $(tex) vol1.texi - texindex vol1.?? - mv vol1.aux elisp1med-aux - mv vol1.toc elisp1med-toc -# -elisp2med-init: elisp2-fns-ready elisp2-aux-ready elisp2init-toc-ready texinfo.tex - @echo "Final TeX run for volume 2..." - cp elisp2init-toc-ready elisp2-toc-ready.toc - cp elisp2-fns-ready vol2.fns - cp elisp2-aux-ready vol2.aux - $(tex) vol2.texi - texindex vol2.?? - mv vol2.aux elisp2med-aux - mv vol2.toc elisp2med-toc - - -# initial toc files. -# -# vol1 toc: volume 1, page break, volume 2 (with II: prepended). -elisp1init-toc-ready: elisp1-init elisp2-init - echo '@unnchapentry{@b{Volume 1}}{10001}{vol1}{}' >$@ - cat elisp1-toc >>$@ - echo '@page' >>$@ - echo '@unnchapentry{@b{Volume 2}}{10001}{vol2}{}' >>$@ - sed 's/{\([^}]*\)}$$/{II:\1}/' elisp2-toc >>$@ -# -# vol2 toc: volume 1 (with I: prepended), page break, volume 2. -elisp2init-toc-ready: elisp1-init elisp2-init - echo '@unnchapentry{@b{Volume 1}}{10001}{vol1}{}' >$@ - sed 's/{\([^}]*\)}$$/{I:\1}/' elisp1-toc >>$@ - echo '@page' >>$@ - echo '@unnchapentry{@b{Volume 2}}{10001}{vol2}{}' >>$@ - cat elisp2-toc >>$@ - - -# initial aux files. -# -# append vol2's fixed aux to normal vol1. The initial runs saved -# elisp1-aux and elisp2-aux. -elisp1-aux-ready: elisp2-aux-vol-added - cat elisp1-aux $< >$@ -# -# prepend vol1's fixed aux to vol2. -elisp2-aux-ready: elisp1-aux-vol-added - cat $< elisp2-aux >$@ - -# on -pg entries, append volume number after page number. -elisp1-aux-vol-added: elisp1-init - sed 's/-pg}{\(.*\)}$$/-pg}{\1, vol.@tie1}/' elisp1-aux >$@ -# -elisp2-aux-vol-added: elisp2-init - sed 's/-pg}{\(.*\)}$$/-pg}{\1, vol.@tie2}/' elisp2-aux >$@ - - -# initial index (fns) file. -# -# Append other volume's index entries to this one's. -# Index entries in this volume will then take precedence. -elisp1-fns-ready: elisp1-fn-vol-added elisp2-fn-vol-added - cat elisp2-fn-vol-added >>vol1.fn - texindex vol1.fn - cp vol1.fns $@ -# -elisp2-fns-ready: elisp1-fn-vol-added elisp2-fn-vol-added - cat elisp1-fn-vol-added >>vol2.fn - texindex vol2.fn - cp vol2.fns $@ - -# Insert volume number (I: or II:) into index file. -elisp1-fn-vol-added: elisp1-init - cp vol1.fn elisp1-fn - sed 's/}{/}{I:/' elisp1-fn >$@ -# -elisp2-fn-vol-added: elisp2-init - cp vol2.fn elisp2-fn - sed 's/}{/}{II:/' elisp2-fn >$@ - - -# initial TeX runs. -# -# We use the .fn, .aux, and .toc files created here in subsequent -# processing. The page numbers generated here will not be correct yet, -# but we run texindex and TeX a second time just to get them closer. -# Otherwise it might take even longer for them to converge. -# -elisp1-init: vol1.texi - @echo -e "\f Initial TeX run for volume 1..." - rm -f vol1.aux vol1.toc - $(tex) $< - texindex vol1.?? - mv vol1.aux elisp1-aux - mv vol1.toc elisp1-toc - touch $@ -# -elisp2-init: vol2.texi - @echo "Initial TeX run for volume 2..." - rm -f vol2.aux vol2.toc - $(tex) $< - texindex vol2.?? - mv vol2.aux elisp2-aux - mv vol2.toc elisp2-toc - touch $@ - -# COPYING CONDITIONS -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# This file is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this file; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -# Boston, MA 02110-1301, USA. - -# arch-tag: 5c258a2e-d4a9-4d0e-b279-fb3a6faa27eb