Mercurial > emacs

--- a/man/buffers.texi	Thu Feb 02 04:34:46 2006 +0000
+++ b/man/buffers.texi	Thu Feb 02 04:35:19 2006 +0000
@@ -87,8 +87,8 @@
 @findex switch-to-buffer
   To select the buffer named @var{bufname}, type @kbd{C-x b @var{bufname}
 @key{RET}}.  This runs the command @code{switch-to-buffer} with argument
-@var{bufname}.  You can use completion on an abbreviation for the buffer
-name you want (@pxref{Completion}).  An empty argument to @kbd{C-x b}
+@var{bufname}.  You can use completion to enter the buffer
+name (@pxref{Completion}).  An empty argument to @kbd{C-x b}
 specifies the buffer that was current most recently among those not
 now displayed in any window.

@@ -128,7 +128,7 @@
 @ref{Special Buffer Frames}, for more about these variables.  In
 addition, if the value of @code{display-buffer-reuse-frames} is
 non-@code{nil}, and the buffer you want to switch to is already
-displayed in some frame, Emacs will raise that frame.
+displayed in some frame, Emacs will just raise that frame.

   Most buffers are created by visiting files, or by Emacs commands that
 want to display some text, but you can also create a buffer explicitly
@@ -177,10 +177,11 @@
 The buffers are listed in the order that they were current; the
 buffers that were current most recently come first.

-  @samp{*} in the first field of a line indicates the buffer is ``modified.''
-If several buffers are modified, it may be time to save some with @kbd{C-x s}
-(@pxref{Save Commands}).  @samp{%} indicates a read-only buffer.  @samp{.} marks the
-current buffer.  Here is an example of a buffer list:@refill
+  @samp{*} in the first field of a line indicates the buffer is
+``modified.''  If several buffers are modified, it may be time to save
+some with @kbd{C-x s} (@pxref{Save Commands}).  @samp{%} indicates a
+read-only buffer.  @samp{.} marks the current buffer.  Here is an
+example of a buffer list:@refill

 @smallexample
 CRM Buffer                Size  Mode              File
@@ -199,7 +200,7 @@
 Note that the buffer @samp{*Help*} was made by a help request; it is
 not visiting any file.  The buffer @code{src} was made by Dired on the
 directory @file{~/cvs/emacs/src/}.  You can list only buffers that are
-visiting files by giving the command a prefix; for instance, by typing
+visiting files by giving the command a prefix argument, as in
 @kbd{C-u C-x C-b}.

   @code{list-buffers} omits buffers whose names begin with a space,
@@ -243,10 +244,10 @@
 Control}.

 @findex rename-buffer
-  @kbd{M-x rename-buffer} changes the name of the current buffer.  Specify
-the new name as a minibuffer argument.  There is no default.  If you
-specify a name that is in use for some other buffer, an error happens and
-no renaming is done.
+  @kbd{M-x rename-buffer} changes the name of the current buffer.  You
+specify the new name as a minibuffer argument; there is no default.
+If you specify a name that is in use for some other buffer, an error
+happens and no renaming is done.

 @findex rename-uniquely
   @kbd{M-x rename-uniquely} renames the current buffer to a similar
@@ -274,7 +275,7 @@

   The commands @kbd{M-x append-to-buffer} and @kbd{M-x insert-buffer}
 can be used to copy text from one buffer to another.  @xref{Accumulating
-Text}.@refill
+Text}.

 @node Kill Buffer
 @section Killing Buffers
@@ -470,17 +471,15 @@
 the buffer list manually, you can use all of the commands described
 here.

-  Normally, the buffer @samp{*Buffer List*} is not updated automatically when
-buffers are created and killed; its contents are just text.  If you have
-created, deleted or renamed buffers, the way to update @samp{*Buffer
-List*} to show what you have done is to type @kbd{g}
-(@code{revert-buffer}) or repeat the @code{buffer-menu} command.
-
-  The @samp{*Buffer List*} buffer does automatically update every
-@code{auto-revert-interval} seconds if you enable Auto Revert mode in
-it.  (As long as it is not marked modified.)  Global Auto Revert mode
-does not update the @samp{*Buffer List*} buffer by default, but it
-does if @code{global-auto-revert-non-file-buffers} is non-@code{nil}.
+  Normally, the buffer @samp{*Buffer List*} is not updated
+automatically when buffers are created and killed; its contents are
+just text.  If you have created, deleted or renamed buffers, the way
+to update @samp{*Buffer List*} to show what you have done is to type
+@kbd{g} (@code{revert-buffer}).  You can make this happen regularly
+every @code{auto-revert-interval} seconds if you enable Auto Revert
+mode in this buffer, as long as it is not marked modified.  Global
+Auto Revert mode applies to the @samp{*Buffer List*} buffer only if
+@code{global-auto-revert-non-file-buffers} is non-@code{nil}.
 @inforef{Autorevert,, emacs-xtra}, for details.

   The command @code{buffer-menu-other-window} works the same as
@@ -589,7 +588,7 @@
 name is not very important if you are going to @emph{look} at the
 buffer names before you type one.  But as an experienced user, if you
 know the rule, you won't have to look.  And then you may find that one
-rule or another is easier for you to remember and utilize fast.
+rule or another is easier for you to remember and apply quickly.

 @node Iswitchb
 @subsection Switching Between Buffers using Substrings
--- a/man/indent.texi	Thu Feb 02 04:34:46 2006 +0000
+++ b/man/indent.texi	Thu Feb 02 04:35:19 2006 +0000
@@ -45,7 +45,7 @@

 A tab character is displayed as a stretch of whitespace which extends
 to the next display tab stop position, and the default width of a tab
-stop is eight.  @xref{Display Custom}, for more details.
+stop is eight.  @xref{Text Display}, for more details.

 @item
 Insert whitespace up to the next tab stop.  You can set tab stops at
@@ -114,13 +114,13 @@
 @kindex M-^
 @findex delete-indentation
   To join two lines cleanly, use the @kbd{M-^}
-(@code{delete-indentation}) command.  It deletes the indentation at the
-front of the current line, and the line boundary as well, replacing them
-with a single space.  As a special case (useful for Lisp code) the
-single space is omitted if the characters to be joined are consecutive
-open parentheses or closing parentheses, or if the junction follows
-another newline.  To delete just the indentation of a line, go to the
-beginning of the line and use @kbd{M-\}
+(@code{delete-indentation}) command.  It deletes the indentation at
+the front of the current line, and the line boundary as well,
+replacing them with a single space.  As a special case (useful for
+Lisp code) the single space is omitted if the characters to be joined
+are consecutive open parentheses or closing parentheses, or if the
+junction follows another newline.  To delete just the indentation of a
+line, go to the beginning of the line and use @kbd{M-\}
 (@code{delete-horizontal-space}), which deletes all spaces and tabs
 around the cursor.

@@ -140,12 +140,12 @@
 that column.  @kbd{C-x @key{TAB}} (@code{indent-rigidly}) moves all of
 the lines in the region right by its argument (left, for negative
 arguments).  The whole group of lines moves rigidly sideways, which is
-how the command gets its name.@refill
+how the command gets its name.

 @cindex remove indentation
-  If you want to remove all indentation from all of the line in the
-region, invoke @kbd{C-x @key{TAB}} with a large negative argument,
-such as -1000.
+  To remove all indentation from all of the lines in the region,
+invoke @kbd{C-x @key{TAB}} with a large negative argument, such as
+-1000.

 @findex indent-relative
   @kbd{M-x indent-relative} indents at point based on the previous line
--- a/man/major.texi	Thu Feb 02 04:34:46 2006 +0000
+++ b/man/major.texi	Thu Feb 02 04:35:19 2006 +0000
@@ -65,10 +65,10 @@
 most of the time Emacs determines which mode to use based on the file
 name or on special text in the file.

-  Explicit selection of a new major mode is done with a @kbd{M-x} command.
-From the name of a major mode, add @code{-mode} to get the name of a
-command to select that mode.  Thus, you can enter Lisp mode by executing
-@kbd{M-x lisp-mode}.
+  To explicitly select a new major, you use an @kbd{M-x} command.
+Take the name of a major mode and add @code{-mode} to get the name of
+the command to select that mode.  Thus, you can enter Lisp mode by
+executing @kbd{M-x lisp-mode}.

 @vindex auto-mode-alist
   When you visit a file, Emacs usually chooses the right major mode based