Mercurial > emacs
changeset 90068:eac554634bfa
Revision: miles@gnu.org--gnu-2004/emacs--unicode--0--patch-79
Merge from emacs--cvs-trunk--0
Patches applied:
* miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-735
- miles@gnu.org--gnu-2004/emacs--cvs-trunk--0--patch-747
Update from CVS
line wrap: on
line diff
--- a/admin/FOR-RELEASE Tue Dec 14 09:27:49 2004 +0000 +++ b/admin/FOR-RELEASE Sat Dec 25 02:00:25 2004 +0000 @@ -57,7 +57,7 @@ Connected to ftp.nluug.nl. Ange-ftp chokes on the `No route to host' message and doesn't look any -further. +further. I think in the near future we will see more of this problem, so it might be time to make anfe-ftp more intelligent. @@ -112,6 +112,28 @@ * REDISPLAY RELATED BUGS +** Strange text scrolling with Emacs + GTK + +> I could reproduce the problem with the latest CVS. +> +> % emacs -Q +> M-x info RET +> M-> +> C-l +> C-x ( C-u - 1 C-v C-x ) +> C-x e e e e ... +> +> I see the problem around "CC mode" and "Forms". + +It is not specific for the first line of a buffer. + +Rather it happens for lines which are indented but the +indentation is controlled by a display property and +the newline is part of that display property -- in +that case, the indentation is not recognized for the +first display line. + + ** Avoid unbreakable loops in redisplay. Redisplay may loop if there is an error in some display property, e.g.
--- a/configure Tue Dec 14 09:27:49 2004 +0000 +++ b/configure Sat Dec 25 02:00:25 2004 +0000 @@ -984,7 +984,7 @@ else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi - cd $ac_popdir + cd "$ac_popdir" done fi @@ -3250,8 +3250,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3309,8 +3308,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3426,8 +3424,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3481,8 +3478,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3527,8 +3523,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3572,8 +3567,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4206,8 +4200,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4483,8 +4476,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4513,8 +4505,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4584,8 +4575,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4637,8 +4627,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4709,8 +4698,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4762,8 +4750,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4833,8 +4820,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5004,8 +4990,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5074,8 +5059,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5229,8 +5213,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5323,8 +5306,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5466,8 +5448,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5586,8 +5567,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5752,8 +5732,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5816,8 +5795,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5890,8 +5868,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5977,8 +5954,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6051,8 +6027,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6122,8 +6097,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6182,8 +6156,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6252,8 +6225,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6314,8 +6286,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6381,8 +6352,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6528,8 +6498,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6593,8 +6562,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6659,8 +6627,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6706,8 +6673,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6781,8 +6747,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6847,8 +6812,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6892,8 +6856,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6964,8 +6927,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7015,8 +6977,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7087,8 +7048,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7138,8 +7098,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7210,8 +7169,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7261,8 +7219,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7333,8 +7290,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7384,8 +7340,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7456,8 +7411,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7507,8 +7461,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7595,8 +7548,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7702,8 +7654,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7763,8 +7714,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7888,6 +7838,7 @@ echo "$as_me:$LINENO: checking for X" >&5 echo $ECHO_N "checking for X... $ECHO_C" >&6 +ac_path_x_has_been_run=yes # Check whether --with-x or --without-x was given. if test "${with_x+set}" = set; then @@ -7980,7 +7931,7 @@ /usr/openwin/share/include' if test "$ac_x_includes" = no; then - # Guess where to find include files, by looking for Intrinsic.h. + # Guess where to find include files, by looking for a specified header file. # First, try using that file with no special directory specified. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ @@ -8054,8 +8005,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8115,8 +8065,12 @@ # Update the cache value to reflect the command line values. ac_cv_have_x="have_x=yes \ ac_x_includes=$x_includes ac_x_libraries=$x_libraries" - echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 -echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6 + # It might be that x_includes is empty (headers are found in the + # standard search path. Then output the corresponding message + ac_out_x_includes=$x_includes + test "x$x_includes" = x && ac_out_x_includes="in standard search path" + echo "$as_me:$LINENO: result: libraries $x_libraries, headers $ac_out_x_includes" >&5 +echo "${ECHO_T}libraries $x_libraries, headers $ac_out_x_includes" >&6 fi if test "$no_x" = yes; then @@ -8280,8 +8234,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8376,8 +8329,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8436,8 +8388,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8521,8 +8472,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8706,8 +8656,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8959,8 +8908,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9027,8 +8975,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9097,8 +9044,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9183,8 +9129,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9261,8 +9206,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9316,8 +9260,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9386,8 +9329,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9491,8 +9433,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9559,8 +9500,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9630,8 +9570,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -9871,8 +9810,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10394,8 +10332,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10467,8 +10404,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10550,8 +10486,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10630,8 +10565,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10705,8 +10639,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10774,8 +10707,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10844,8 +10776,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -10969,8 +10900,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -11066,8 +10996,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -11147,8 +11076,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -11216,8 +11144,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -11362,8 +11289,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -11472,8 +11398,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -11618,8 +11543,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -11726,8 +11650,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -11881,8 +11804,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -11957,8 +11879,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -12106,8 +12027,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -12184,8 +12104,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -12332,8 +12251,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -12409,8 +12327,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -12553,8 +12470,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -12722,8 +12638,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -12868,8 +12783,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -12945,8 +12859,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -13009,8 +12922,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -13091,8 +13003,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -13233,8 +13144,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -13379,8 +13289,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -13456,8 +13365,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -13530,8 +13438,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -13686,8 +13593,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -13753,8 +13659,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14013,8 +13918,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14081,8 +13985,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14234,8 +14137,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14419,8 +14321,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14747,8 +14648,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14849,8 +14749,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -14923,8 +14822,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -15003,8 +14901,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -15073,8 +14970,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -15142,8 +15038,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -15217,8 +15112,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -15322,8 +15216,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -15398,8 +15291,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -15551,8 +15443,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -15620,8 +15511,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -15798,8 +15688,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -15875,8 +15764,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -16030,8 +15918,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -16182,8 +16069,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -16334,8 +16220,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -16477,8 +16362,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -16522,8 +16406,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -16669,8 +16552,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -16714,8 +16596,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -16780,8 +16661,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -16844,8 +16724,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -16947,8 +16826,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17017,8 +16895,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17125,8 +17002,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17229,8 +17105,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17306,8 +17181,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17411,8 +17285,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17504,8 +17377,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17570,8 +17442,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17637,8 +17508,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17748,8 +17618,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17814,8 +17683,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17895,8 +17763,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -17969,8 +17836,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -18043,8 +17909,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -18117,8 +17982,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -18192,8 +18056,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -18265,8 +18128,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -18341,8 +18203,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -18414,8 +18275,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -18488,8 +18348,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -18639,8 +18498,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -18786,8 +18644,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -18933,8 +18790,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19091,8 +18947,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19238,8 +19093,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19385,8 +19239,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19544,8 +19397,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19703,8 +19555,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19893,8 +19744,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -19967,8 +19817,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20036,8 +19885,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20083,8 +19931,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20158,8 +20005,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20223,8 +20069,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20362,8 +20207,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20424,8 +20268,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20570,8 +20413,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20727,8 +20569,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20899,8 +20740,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -20968,8 +20808,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -21154,8 +20993,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -21448,8 +21286,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -21514,8 +21351,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -21578,8 +21414,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -21645,8 +21480,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -21687,8 +21521,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -21755,8 +21588,7 @@ cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -22885,11 +22717,6 @@ *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ @@ -22928,6 +22755,12 @@ fi;; esac done` || { (exit 1); exit 1; } + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub
--- a/etc/ChangeLog Tue Dec 14 09:27:49 2004 +0000 +++ b/etc/ChangeLog Sat Dec 25 02:00:25 2004 +0000 @@ -1,3 +1,11 @@ +2004-12-21 Richard M. Stallman <rms@gnu.org> + + * DISTRIB: Don't say "freeware". + +2004-12-15 Nick Roberts <nickrob@snap.net.nz> + + * DEBUG: Change printing example to break on a procedure name. + 2004-12-11 Dan Nicolaescu <dann@ics.uci.edu> * e/eterm.ti: Add rs1.
--- a/etc/DEBUG Tue Dec 14 09:27:49 2004 +0000 +++ b/etc/DEBUG Sat Dec 25 02:00:25 2004 +0000 @@ -107,36 +107,32 @@ Even with a live process, these x... commands are useful for examining the fields in a buffer, window, process, frame or marker. Here's an example using concepts explained in the node "Value History" -of the GDB manual to print the variable frame from this line in -xmenu.c: - - buf.frame_or_window = frame; - -First, use these commands: +of the GDB manual to print values associated with the variable +called frame. First, use these commands: cd src gdb emacs - b xmenu.c:1296 + b set_frame_buffer_list r -q -Then type C-x 5 2 to create a new frame, and it hits the breakpoint: +Then when Emacs it hits the breakpoint: (gdb) p frame - $1 = 1077872640 + $1 = 139854428 (gdb) xtype Lisp_Vectorlike PVEC_FRAME (gdb) xframe - $2 = (struct frame *) 0x3f0800 + $2 = (struct frame *) 0x8560258 (gdb) p *$ $3 = { - size = 536871989, - next = 0x366240, - name = 809661752, + size = 1073742931, + next = 0x85dfe58, + name = 140615219, [...] } (gdb) p $3->name - $4 = 809661752 + $4 = 140615219 Now we can use `pr' to print the name of the frame:
--- a/etc/DISTRIB Tue Dec 14 09:27:49 2004 +0000 +++ b/etc/DISTRIB Sat Dec 25 02:00:25 2004 +0000 @@ -83,7 +83,7 @@ If you like GNU Emacs, please express your satisfaction with a donation: send me or the Foundation what you feel Emacs has been worth to you. If you are glad that I developed GNU Emacs and distribute it -as freeware, rather than following the obstructive and antisocial +as free software, rather than following the obstructive and antisocial practices typical of software developers, reward me. If you would like the Foundation to develop more free software, contribute.
--- a/etc/NEWS Tue Dec 14 09:27:49 2004 +0000 +++ b/etc/NEWS Sat Dec 25 02:00:25 2004 +0000 @@ -173,28 +173,46 @@ * Changes in Emacs 21.4 +** You can now follow links by clicking Mouse-1 on the link. + +Traditionally, Emacs uses a Mouse-1 click to set point and a Mouse-2 +click to follow a link, whereas most other applications use a Mouse-1 +click for both purposes, depending on whether you click outside or +inside a link. With release 21.4, the behaviour of a Mouse-1 click +has been changed to match this context-sentitive dual behaviour. + +Depending on the current mode, a Mouse-2 click in Emacs may do much +more than just follow a link, so the new Mouse-1 behaviour is only +activated for modes which explicitly mark a clickable text as a "link" +(see the new function `mouse-on-link-p' for details). The lisp +packages that are included in release 21.4 have been adapted to do +this, but external packages may not yet support this. However, there +is no risk in using such packages, as the worst thing that could +happen is that you get the original Mouse-1 behaviour when you click +on a link, which typically means that you set point where you click. + +If you want to get the original Mouse-1 action also inside a link, you +just need to press the Mouse-1 button a little longer than a normal +click (i.e. press and hold the Mouse-1 button for half a second before +you release it). + +Dragging the Mouse-1 inside a link still performs the original +drag-mouse-1 action, typically copy the text. + +You can customize the new Mouse-1 behaviour via the new user option +`mouse-1-click-follows-link'. + ++++ +** When the undo information of the current command gets really large +(beyond the value of `undo-outer-limit'), Emacs asks you whether to +discard it or keep it. + ** line-move-ignore-invisible now defaults to t. ** In Outline mode, hide-body no longer hides lines at the top of the file that precede the first header line. +++ -** `set-auto-mode' now gives the interpreter magic line (if present) -precedence over the file name. Likewise an <?xml or <!DOCTYPE declaration -will give the buffer XML or SGML mode, based on the new var -`magic-mode-alist'. - -+++ -** New function `looking-back' checks whether a regular expression matches -the text before point. Specifying the LIMIT argument bounds how far -back the match can start; this is a way to keep it from taking too long. - -+++ -** New functions `make-progress-reporter', `progress-reporter-update', -`progress-reporter-force-update' and `progress-reporter-done' provide -a simple and efficient way of printing progress messages to the user. - -+++ ** In Enriched mode, `set-left-margin' and `set-right-margin' are now by default bound to `C-c [' and `C-c ]' instead of the former `C-c C-l' and `C-c C-r'. @@ -1160,9 +1178,11 @@ replacement string to specify a position where the replacement string can be edited for each replacement. -** query-replace uses isearch highlighting with lazy highlighting -when the user option `query-replace-highlight' is set to `isearch'. -If it is t, it uses old query-replace highlighting method. +** query-replace uses isearch lazy highlighting when the new user option +`query-replace-lazy-highlight' is non-nil. + +** The current match in query-replace is highlighted in new face +`query-replace' which by default inherits from isearch face. +++ ** Emacs normally highlights mouse sensitive text whenever the mouse @@ -1497,9 +1517,8 @@ mark ring. Use C-u C-u C-SPC to set the mark immediately after a jump. ** Movement commands `beginning-of-buffer', `end-of-buffer', -`beginning-of-defun', `end-of-defun' do not set the mark if the new -option `inhibit-mark-movement' is non-nil, or if the mark is already -active in Transient Mark mode. +`beginning-of-defun', `end-of-defun' do not set the mark if the mark +is already active in Transient Mark mode. +++ ** In the *Occur* buffer, `o' switches to it in another window, and @@ -2446,11 +2465,33 @@ * Lisp Changes in Emacs 21.4 +** Lisp code can now test if a given buffer position is inside a +clickable link with the new function `mouse-on-link-p'. This is the +function used by the new `mouse-1-click-follows-link' functionality. + ++++ ** (while-no-input BODY...) runs BODY, but only so long as no input arrives. If the user types or clicks anything, BODY stops as if a quit had occurred. while-no-input returns the value of BODY, if BODY finishes. It returns nil if BODY was aborted. ++++ +** `set-auto-mode' now gives the interpreter magic line (if present) +precedence over the file name. Likewise an <?xml or <!DOCTYPE declaration +will give the buffer XML or SGML mode, based on the new var +`magic-mode-alist'. + ++++ +** New function `looking-back' checks whether a regular expression matches +the text before point. Specifying the LIMIT argument bounds how far +back the match can start; this is a way to keep it from taking too long. + ++++ +** New functions `make-progress-reporter', `progress-reporter-update', +`progress-reporter-force-update' and `progress-reporter-done' provide +a simple and efficient way for a command to present progress messages +for the user. + --- ** To manipulate the File menu using easy-menu, you must specify the proper name "file". In previous Emacs versions, you had to specify
--- a/lib-src/ChangeLog Tue Dec 14 09:27:49 2004 +0000 +++ b/lib-src/ChangeLog Sat Dec 25 02:00:25 2004 +0000 @@ -1,3 +1,8 @@ +2004-12-15 Andreas Schwab <schwab@suse.de> + + * etags.c (main): Fix typo in conversion of LONG_OPTIONS from + preprocessing to compile time constant. + 2004-11-17 Kim F. Storm <storm@cua.dk> * etags.c: Undo last change.
--- a/lib-src/etags.c Tue Dec 14 09:27:49 2004 +0000 +++ b/lib-src/etags.c Sat Dec 25 02:00:25 2004 +0000 @@ -1,5 +1,5 @@ /* Tags file maker to go with GNU Emacs -*- coding: latin-1 -*- - Copyright (C) 1984, 1987-1989, 1993-1995, 1998-2001, 2002 + Copyright (C) 1984, 1987-1989, 1993-1995, 1998-2001, 2002, 2004 Free Software Foundation, Inc. and Ken Arnold This file is not considered part of GNU Emacs. @@ -1183,7 +1183,7 @@ #ifdef ETAGS_REGEXPS optstring = "-r:Rc:"; #endif /* ETAGS_REGEXPS */ - if (LONG_OPTIONS) + if (!LONG_OPTIONS) optstring += 1; optstring = concat (optstring, "Cf:Il:o:SVhH",
--- a/lisp/ChangeLog Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/ChangeLog Sat Dec 25 02:00:25 2004 +0000 @@ -1,3 +1,280 @@ +2004-12-24 Thien-Thi Nguyen <ttn@gnu.org> + + * progmodes/hideshow.el: Require `cl' when compiling. + Remove XEmacs and Emacs 19 compatibility. + Use `dolist' and `add-to-list' for load-time actions. + (hs-discard-overlays): Use `dolist'. + (hs-show-block): Likewise. + +2004-12-23 Dan Nicolaescu <dann@ics.uci.edu> + + * faces.el (mode-line, mode-line-inactive): Use min-colors. + +2004-12-23 Thien-Thi Nguyen <ttn@gnu.org> + + * progmodes/hideshow.el (hs-inside-comment-p): Fix omission bug: + When extending backwards, move outside the current comment first. + +2004-12-22 Kenichi Handa <handa@m17n.org> + + * international/quail.el (quail-start-translation): Fix prompt + string for the case if input-method-use-echo-area being non-nil. + (quail-start-conversion): Likewise. + (quail-show-guidance): Don't show guidance if + input-method-use-echo-area is non-nil. + +2004-12-21 Richard M. Stallman <rms@gnu.org> + + * textmodes/ispell.el (ispell-help): Bind resize-mini-windows. + +2004-12-21 Markus Rost <rost@ias.edu> + + * calendar/diary-lib.el (mark-diary-entries): Set + mark-diary-entries-in-calendar only after checking for diary-file. + +2004-12-21 Richard M. Stallman <rms@gnu.org> + + * faces.el (escape-glyph): Use blue against light foreground. + + * simple.el (undo-outer-limit-truncate): New function. + (undo-outer-limit-function): Use undo-outer-limit-truncate. + +2004-12-21 Eli Barzilay <eli@barzilay.org> + + * calculator.el: (calculator-radix-grouping-mode) + (calculator-radix-grouping-digits) + (calculator-radix-grouping-separator): + New defcustoms for the new radix grouping mode functionality. + (calculator-mode-hook): Now used in electric mode too. + (calculator-mode-map): Some new keys. + (calculator-message): New function. Some new calls. + (calculator-string-to-number): New function, + (calculator-curnum-value): Use it. + (calculator-rotate-displayer, calculator-rotate-displayer-back) + (calculator-displayer-prev, calculator-displayer-next): + Change digit group size when in radix mode. + (calculator-number-to-string): Renamed from calculator-num-to-string. + Now deals with digit grouping in radix mode. + +2004-12-20 Glenn Morris <gmorris@ast.cam.ac.uk> + + * calendar/calendar.el (view-other-diary-entries): Add autoload. + * calendar/diary-lib.el (view-other-diary-entries): Use + current-prefix-arg in interactive spec. + +2004-12-19 Jay Belanger <belanger@truman.edu> + + * calc/calc-aent.el (calcAlg-blank-matching-open): + Temporarily adjust the syntax of both delimiters of half-open + intervals. + +2004-12-19 Kim F. Storm <storm@cua.dk> + + * mouse.el (mouse-1-click-follows-link): Doc fix. + +2004-12-18 YAMAMOTO Mitsuharu <mituharu@math.s.chiba-u.ac.jp> + + * term/mac-win.el (encoding-vector, mac-font-encoder-list) + (ccl-encode-mac-centraleurroman-font): Use centraleurroman + instead of centraleuropean as the name + +2004-12-17 Michael Albinus <michael.albinus@gmx.de> + + Sync with Tramp 2.0.46. + + * net/tramp.el (tramp-maybe-send-perl-script): Change order of + parameters wrt Tramp convention. + (tramp-handle-file-attributes-with-perl) + (tramp-handle-directory-files-and-attributes): Apply it. + (tramp-do-copy-or-rename-file-out-of-band): Check for existence of + `copy-program'. Reported by Zack Weinberg + <zack@codesourcery.com>. + (top): Set `edebug-form-spec' property directly rather than + calling `def-edebug-spec'. + + * net/tramp-smb.el (tramp-smb-advice-PC-do-completion): Make the + advice less fragile. Surround temporary redefinition of + `substitute-in-file-name' with `unwind-protect'. Suggested by + Matt Hodges <MPHodges@member.fsf.org>. + +2004-12-17 Juri Linkov <juri@jurta.org> + + * replace.el (occur-accumulate-lines, occur-engine): + Make forcing deferred font-lock fontification jit-specific. + +2004-12-17 Kim F. Storm <storm@cua.dk> + + * mouse.el (mouse-1-click-follows-link): New defcustom. + (mouse-on-link-p): New function. + (mouse-drag-region-1): Implement mouse-1-click-follows-link + functionality. Map a mouse-1 click event into a mouse-2 (or + other) event when position is inside a link. + + * tooltip.el (tooltip-show-help-function): Replace "mouse-2" + prefix in tooltip text with "mouse-1" when this is a link + recognized by mouse-1-click-follows-link functionality. + + * help.el (describe-key): Report effective and original binding + for mouse-1 when clicked on a link. + (describe-mode): Add follow-link property to "minor-mode" button. + + * help-fns.el (describe-variable): Add follow-link property to + "below" button. + + * help-mode.el (help-xref): Add follow-link property. + + * apropos.el (apropos-symbol, apropos-function, apropos-macro) + (apropos-command, apropos-variable, apropos-face, apropos-group) + (apropos-widget, apropos-plist): Add follow-link property. + + * pcvs-defs.el (cvs-mode-map): Map follow-link to a function which + checks if position is in a filename, rather than some other + clickable item. Function looks for cvs-filename-face at position. + + * wid-edit.el (widget-specify-field, widget-specify-button): + Map a :follow-link keyword into a follow-link property. + (link): Add :follow-link keyword, map to RET binding. + + * dired.el (dired-mode-map): Map follow-link to mouse-face. + + * progmodes/compile.el (compilation-minor-mode-map) + (compilation-button-map, compilation-mode-map): Likewise. + +2004-12-17 Thien-Thi Nguyen <ttn@gnu.org> + + * play/zone.el (zone): Init `line-spacing' from orig buffer. + (zone-replace-char): Take `count' and `del-count' + instead of `direction'. Update callers. When `del-count' is + non-nil, delete that many characters, otherwise `count' characters + backwards. Insert the newly-replaced string `count' times. + (zone-fret): Handle chars w/ width greater than one. + (zone-fall-through-ws): No longer take window width `ww'. + Update callers. Add handling for `char-width' greater than one. + (zone-pgm-drip): Update var holding window-end position every cycle. + +2004-12-17 Andre Spiegel <spiegel@gnu.org> + + * vc.el (vc-default-update-changelog): Use insert-file-contents, + rather than insert-file. + +2004-12-16 Jay Belanger <belanger@truman.edu> + + * calc/calc-comb.el (var-RandSeed): Don't initially bind it. + (math-init-random-base, math-random-digit): Check to see if + var-RandSeed is bound. + (math-random-last): Declare it. + (math-random-digit): Don't make math-random-last local. + +2004-12-16 Thien-Thi Nguyen <ttn@gnu.org> + + * play/zone.el (zone): Fix omission bug: Use a self-disabling + one-shot thunk for uniform (error, quit, normal) recovery. + Reported by John Paul Wallington. + (zone-pgm-random-life): Fix bug: + Recognize empty initial field by lack of "@" chars. + +2004-12-16 Juri Linkov <juri@jurta.org> + + * help.el (function-called-at-point): + * help-fns.el (variable-at-point): As a last resort try striping + non-word prefixes and suffixes. + + * descr-text.el (describe-property-list): Don't treat syntax-table + specially. Use describe-text-sexp which inserts [show] button + for large objects and handles printing errors. Sort properties + by names in alphabetical order instead of by value sizes. + Add `mouse-face' to list of properties for `describe-face' widget. + (describe-char): Mask out face-id from 19 bits of character. + Print face-id separately. + + * replace.el (occur-accumulate-lines, occur-engine): + Fontify unfontified matching lines in the source buffer + before copying them. + (occur-engine): Don't put mouse-face on context lines. + (occur-next-error): Set point to line beginning/end + before searching for prev/next property to skip multiple + matches on a line (not supported by occur engine). + Remove redundant prefix-numeric-value. + +2004-12-15 Juri Linkov <juri@jurta.org> + + * replace.el (match): New face. + (list-matching-lines-face): Change default from `bold' to `match'. + + * progmodes/grep.el (grep-match-face): New defvar. + (grep-mode-font-lock-keywords): Use grep-match-face instead of + compilation-column-face to highlight grep matches. + + * apropos.el (apropos-match-face): Change default from + `secondary-selection' to `match'. + + * info-look.el (info-lookup-highlight-face): Change default from + `highlight' to `match'. + +2004-12-15 Daniel Pfeiffer <occitan@esperanto.org> + + * progmodes/executable.el (executable-interpret): Eliminate + obsolete compile-internal, and switch to comint for interaction. + +2004-12-15 J.D. Smith <jdsmith@as.arizona.edu> + + * progmodes/idlwave.el (idlwave-skip-multi-commands): Don't match + `&&' when skipping multiple statements on a line. + +2004-12-15 Thien-Thi Nguyen <ttn@gnu.org> + + * play/zone.el (zone): Set `truncate-lines'. + Also, init `tab-width' with value from original buffer. + (zone-shift-up): Rewrite for speed. + (zone-shift-down, zone-shift-left, zone-shift-right): Likewise. + (zone-pgm-jitter): Remove redundant entries from ops vector. + (zone-exploding-remove): Reduce iteration count. + (zone-cpos): Convert to defsubst. + (zone-replace-char): New defsubst. + (zone-park/sit-for): Likewise. + (zone-fret): Take window-start arg. + Update callers. Use `zone-park/sit-for'. + (zone-fill-out-screen): Rewrite. + (zone-fall-through-ws): Likewise. Update callers. + (zone-pgm-drip): Use `zone-replace-char'. + Move var inits before while-loop. Use `zone-park/sit-for'. + (zone-pgm-random-life): Handle empty initial field. + Use `zone-replace-char' and `zone-park/sit-for'. + +2004-12-15 Juri Linkov <juri@jurta.org> + + * isearch.el (isearch-update): Test isearch-lazy-highlight + before calling isearch-lazy-highlight-new-loop. + (isearch-lazy-highlight-new-loop): + Don't test isearch-lazy-highlight. + + * replace.el (perform-replace): Add isearch-case-fold-search. + Use delimited-flag for isearch-regexp. + Reset isearch-lazy-highlight-last-string to force lazy + highlighting when called from isearch mode. + (query-replace-highlight): Revert defcustom type to boolean. + (query-replace-lazy-highlight): New defcustom. + (query-replace): New face. + (perform-replace, replace-highlight, replace-dehighlight): + Test query-replace-lazy-highlight instead of special value + `isearch' of query-replace-highlight. + (replace-dehighlight): Don't call isearch-dehighlight. + (replace-highlight): Don't call isearch-highlight. + Use face `query-replace' unconditionally. + +2004-12-14 Kim F. Storm <storm@cua.dk> + + * simple.el (inhibit-mark-movement): Remove defvar. + (beginning-of-buffer, end-of-buffer): Don't use it. + + * emacs-lisp/lisp.el (beginning-of-defun, end-of-defun): Don't + use inhibit-mark-movement. + + * emulation/cua-base.el (cua--preserve-mark-commands): Remove. + (cua--undo-push-mark): Remove. + (cua--pre-command-handler, cua--post-command-handler): Don't + fiddle with inhibit-mark-movement. + 2004-12-14 Juri Linkov <juri@jurta.org> * buff-menu.el (list-buffers-noselect): Collect internal info
--- a/lisp/apropos.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/apropos.el Sat Dec 25 02:00:25 2004 +0000 @@ -96,7 +96,7 @@ :group 'apropos :type 'face) -(defcustom apropos-match-face 'secondary-selection +(defcustom apropos-match-face 'match "*Face for matching text in Apropos documentation/value, or nil for none. This applies when you look for matches in the documentation or variable value for the regexp; the part that matches gets displayed in this font." @@ -163,6 +163,7 @@ (define-button-type 'apropos-symbol 'face apropos-symbol-face 'help-echo "mouse-2, RET: Display more help on this symbol" + 'follow-link t 'action #'apropos-symbol-button-display-help 'skip t) @@ -174,19 +175,24 @@ (define-button-type 'apropos-function 'apropos-label "Function" + 'help-echo "mouse-2, RET: Display more help on this function" + 'follow-link t 'action (lambda (button) - (describe-function (button-get button 'apropos-symbol))) - 'help-echo "mouse-2, RET: Display more help on this function") + (describe-function (button-get button 'apropos-symbol)))) + (define-button-type 'apropos-macro 'apropos-label "Macro" + 'help-echo "mouse-2, RET: Display more help on this macro" + 'follow-link t 'action (lambda (button) - (describe-function (button-get button 'apropos-symbol))) - 'help-echo "mouse-2, RET: Display more help on this macro") + (describe-function (button-get button 'apropos-symbol)))) + (define-button-type 'apropos-command 'apropos-label "Command" + 'help-echo "mouse-2, RET: Display more help on this command" + 'follow-link t 'action (lambda (button) - (describe-function (button-get button 'apropos-symbol))) - 'help-echo "mouse-2, RET: Display more help on this command") + (describe-function (button-get button 'apropos-symbol)))) ;; We used to use `customize-variable-other-window' instead for a ;; customizable variable, but that is slow. It is better to show an @@ -196,18 +202,21 @@ (define-button-type 'apropos-variable 'apropos-label "Variable" 'help-echo "mouse-2, RET: Display more help on this variable" + 'follow-link t 'action (lambda (button) (describe-variable (button-get button 'apropos-symbol)))) (define-button-type 'apropos-face 'apropos-label "Face" 'help-echo "mouse-2, RET: Display more help on this face" + 'follow-link t 'action (lambda (button) (describe-face (button-get button 'apropos-symbol)))) (define-button-type 'apropos-group 'apropos-label "Group" 'help-echo "mouse-2, RET: Display more help on this group" + 'follow-link t 'action (lambda (button) (customize-group-other-window (button-get button 'apropos-symbol)))) @@ -215,12 +224,14 @@ (define-button-type 'apropos-widget 'apropos-label "Widget" 'help-echo "mouse-2, RET: Display more help on this widget" + 'follow-link t 'action (lambda (button) (widget-browse-other-window (button-get button 'apropos-symbol)))) (define-button-type 'apropos-plist 'apropos-label "Plist" 'help-echo "mouse-2, RET: Display more help on this plist" + 'follow-link t 'action (lambda (button) (apropos-describe-plist (button-get button 'apropos-symbol))))
--- a/lisp/calc/calc-aent.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/calc/calc-aent.el Sat Dec 25 02:00:25 2004 +0000 @@ -410,32 +410,40 @@ (exit-minibuffer)))) (defun calcAlg-blink-matching-open () - (let ((oldpos (point)) - (blinkpos nil)) + (let ((rightpt (point)) + (leftpt nil) + (rightchar (preceding-char)) + leftchar + rightsyntax + leftsyntax) (save-excursion (condition-case () - (setq blinkpos (scan-sexps oldpos -1)) - (error nil))) - (if (and blinkpos - (> oldpos (1+ (point-min))) - (or (and (= (char-after (1- oldpos)) ?\)) - (= (char-after blinkpos) ?\[)) - (and (= (char-after (1- oldpos)) ?\]) - (= (char-after blinkpos) ?\())) - (save-excursion - (goto-char blinkpos) - (looking-at ".+\\(\\.\\.\\|\\\\dots\\|\\\\ldots\\)"))) - (let ((saved (aref (syntax-table) (char-after blinkpos)))) - (unwind-protect - (progn - (aset (syntax-table) (char-after blinkpos) - (+ (logand saved 255) - (lsh (char-after (1- oldpos)) 8))) - (blink-matching-open)) - (aset (syntax-table) (char-after blinkpos) saved))) + (setq leftpt (scan-sexps rightpt -1) + leftchar (char-after leftpt)) + (error nil))) + (if (and leftpt + (or (and (= rightchar ?\)) + (= leftchar ?\[)) + (and (= rightchar ?\]) + (= leftchar ?\())) + (save-excursion + (goto-char leftpt) + (looking-at ".+\\(\\.\\.\\|\\\\dots\\|\\\\ldots\\)"))) + (let ((leftsaved (aref (syntax-table) leftchar)) + (rightsaved (aref (syntax-table) rightchar))) + (unwind-protect + (progn + (cond ((= leftchar ?\[) + (aset (syntax-table) leftchar (cons 4 ?\))) + (aset (syntax-table) rightchar (cons 5 ?\[))) + (t + (aset (syntax-table) leftchar (cons 4 ?\])) + (aset (syntax-table) rightchar (cons 5 ?\()))) + (blink-matching-open)) + (aset (syntax-table) leftchar leftsaved) + (aset (syntax-table) rightchar rightsaved))) (blink-matching-open)))) - (defun calc-alg-digit-entry () (calc-alg-entry (cond ((eq last-command-char ?e)
--- a/lisp/calc/calc-comb.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/calc/calc-comb.el Sat Dec 25 02:00:25 2004 +0000 @@ -540,12 +540,12 @@ ;;; Produce a random 10-bit integer, with (random) if no seed provided, ;;; or else with Numerical Recipes algorithm ran3 / Knuth 3.2.2-A. -(defvar var-RandSeed nil) +(defvar var-RandSeed) (defvar math-random-cache nil) (defvar math-gaussian-cache nil) (defun math-init-random-base () - (if var-RandSeed + (if (and (boundp 'var-RandSeed) var-RandSeed) (if (eq (car-safe var-RandSeed) 'vec) nil (if (Math-integerp var-RandSeed) @@ -599,9 +599,10 @@ ;;; Produce a random digit in the range 0..999. ;;; Avoid various pitfalls that may lurk in the built-in (random) function! ;;; Shuffling algorithm from Numerical Recipes, section 7.1. +(defvar math-random-last) (defun math-random-digit () - (let (i math-random-last) - (or (eq var-RandSeed math-last-RandSeed) + (let (i) + (or (and (boundp 'var-RandSeed) (eq var-RandSeed math-last-RandSeed)) (math-init-random-base)) (or math-random-cache (progn
--- a/lisp/calculator.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/calculator.el Sat Dec 25 02:00:25 2004 +0000 @@ -4,6 +4,7 @@ ;; Author: Eli Barzilay <eli@barzilay.org> ;; Keywords: tools, convenience +;; Time-stamp: <2002-07-13 01:14:35 eli> ;; This file is part of GNU Emacs. @@ -100,6 +101,20 @@ :type 'integer :group 'calculator) +(defcustom calculator-radix-grouping-mode t + "*Use digit grouping in radix output mode. +If this is set, chunks of `calculator-radix-grouping-digits' characters +will be separated by `calculator-radix-grouping-separator' when in radix +output mode is active (determined by `calculator-output-radix').") + +(defcustom calculator-radix-grouping-digits 4 + "*The number of digits used for grouping display in radix modes. +See `calculator-radix-grouping-mode'.") + +(defcustom calculator-radix-grouping-separator "'" + "*The separator used in radix grouping display. +See `calculator-radix-grouping-mode'.") + (defcustom calculator-remove-zeros t "*Non-nil value means delete all redundant zero decimal digits. If this value is not t, and not nil, redundant zeros are removed except @@ -163,7 +178,11 @@ :group 'calculator) (defcustom calculator-mode-hook nil - "*List of hook functions for `calculator-mode' to run." + "*List of hook functions for `calculator-mode' to run. +Note: if `calculator-electric-mode' is on, then this hook will get +activated in the minibuffer - in that case it should not do much more +than local key settings and other effects that will change things +outside the scope of calculator related code." :type 'hook :group 'calculator) @@ -387,7 +406,7 @@ "oD" "oH" "oX" "oO" "oB") (calculator-rotate-displayer "'") (calculator-rotate-displayer-back "\"") - (calculator-displayer-pref "{") + (calculator-displayer-prev "{") (calculator-displayer-next "}") (calculator-saved-up [up] [?\C-p]) (calculator-saved-down [down] [?\C-n]) @@ -399,10 +418,10 @@ (calculator-save-and-quit [(control return)] [(control kp-enter)]) (calculator-paste [insert] [(shift insert)] - [mouse-2]) + [paste] [mouse-2] [?\C-y]) (calculator-clear [delete] [?\C-?] [?\C-d]) (calculator-help [?h] [??] [f1] [help]) - (calculator-copy [(control insert)]) + (calculator-copy [(control insert)] [copy]) (calculator-backspace [backspace]) ))) (while p @@ -536,7 +555,7 @@ ,@(mapcar (lambda (x) (nth 1 x)) radix-selectors) "---" ,@(mapcar (lambda (x) (nth 2 x)) radix-selectors))) - ("Decimal Dislpay" + ("Decimal Display" ,@(mapcar (lambda (d) (vector (cadr d) ;; Note: inserts actual object here @@ -611,10 +630,11 @@ * \"=?\": (? is B/O/H) the display radix (when input is decimal); * \"??\": (? is D/B/O/H) 1st char for input radix, 2nd for display. -Also, the quote character can be used to switch display modes for -decimal numbers (double-quote rotates back), and the two brace -characters (\"{\" and \"}\" change display parameters that these -displayers use (if they handle such). +Also, the quote key can be used to switch display modes for decimal +numbers (double-quote rotates back), and the two brace characters +\(\"{\" and \"}\" change display parameters that these displayers use (if +they handle such). If output is using any radix mode, then these keys +toggle digit grouping mode and the chunk size. Values can be saved for future reference in either a list of saved values, or in registers. @@ -683,6 +703,7 @@ (setq calculator-saved-global-map (current-global-map)) (use-local-map nil) (use-global-map calculator-mode-map) + (run-hooks 'calculator-mode-hook) (unwind-protect (catch 'calculator-done (Electric-command-loop @@ -717,6 +738,12 @@ (if (and calculator-restart-other-mode calculator-electric-mode) (calculator))) +(defun calculator-message (string &rest arguments) + "Same as `message', but special handle of electric mode." + (apply 'message string arguments) + (if calculator-electric-mode + (progn (sit-for 1) (message nil)))) + ;;;--------------------------------------------------------------------- ;;; Operators @@ -818,82 +845,116 @@ (concat calculator-prompt (substring prompt (+ trim (length calculator-prompt))))))) -(defun calculator-curnum-value () - "Get the numeric value of the displayed number string as a float." +(defun calculator-string-to-number (str) + "Convert the given STR to a number, according to the value of +`calculator-input-radix'." (if calculator-input-radix (let ((radix (cdr (assq calculator-input-radix '((bin . 2) (oct . 8) (hex . 16))))) - (i -1) (value 0)) - ;; assume valid input (upcased & characters in range) - (while (< (setq i (1+ i)) (length calculator-curnum)) - (setq value - (+ (let ((ch (aref calculator-curnum i))) - (- ch (if (<= ch ?9) ?0 (- ?A 10)))) - (* radix value)))) + (i -1) (value 0) (new-value 0)) + ;; assume mostly valid input (e.g., characters in range) + (while (< (setq i (1+ i)) (length str)) + (setq new-value + (let* ((ch (upcase (aref str i))) + (n (cond ((< ch ?0) nil) + ((<= ch ?9) (- ch ?0)) + ((< ch ?A) nil) + ((<= ch ?Z) (- ch (- ?A 10))) + (t nil)))) + (if (and n (<= 0 n) (< n radix)) + (+ n (* radix value)) + (progn + (calculator-message + "Warning: Ignoring bad input character `%c'." ch) + (sit-for 1) + value)))) + (if (if (< new-value 0) (> value 0) (< value 0)) + (calculator-message "Warning: Overflow in input.")) + (setq value new-value)) value) - (car - (read-from-string - (cond - ((equal "." calculator-curnum) - "0.0") - ((string-match "[eE][+-]?$" calculator-curnum) - (concat calculator-curnum "0")) - ((string-match "\\.[0-9]\\|[eE]" calculator-curnum) - calculator-curnum) - ((string-match "\\." calculator-curnum) - ;; do this because Emacs reads "23." as an integer - (concat calculator-curnum "0")) - ((stringp calculator-curnum) - (concat calculator-curnum ".0")) - (t "0.0")))))) + (car (read-from-string + (cond ((equal "." str) "0.0") + ((string-match "[eE][+-]?$" str) (concat str "0")) + ((string-match "\\.[0-9]\\|[eE]" str) str) + ((string-match "\\." str) + ;; do this because Emacs reads "23." as an integer + (concat str "0")) + ((stringp str) (concat str ".0")) + (t "0.0")))))) + +(defun calculator-curnum-value () + "Get the numeric value of the displayed number string as a float." + (calculator-string-to-number calculator-curnum)) (defun calculator-rotate-displayer (&optional new-disp) "Switch to the next displayer on the `calculator-displayers' list. Can be called with an optional argument NEW-DISP to force rotation to -that argument." +that argument. +If radix output mode is active, toggle digit grouping." (interactive) - (setq calculator-displayers - (if (and new-disp (memq new-disp calculator-displayers)) - (let ((tmp nil)) - (while (not (eq (car calculator-displayers) new-disp)) - (setq tmp (cons (car calculator-displayers) tmp)) - (setq calculator-displayers (cdr calculator-displayers))) - (setq calculator-displayers - (nconc calculator-displayers (nreverse tmp)))) - (nconc (cdr calculator-displayers) - (list (car calculator-displayers))))) - (message "Using %s." (cadr (car calculator-displayers))) - (if calculator-electric-mode - (progn (sit-for 1) (message nil))) + (cond + (calculator-output-radix + (setq calculator-radix-grouping-mode + (not calculator-radix-grouping-mode)) + (calculator-message + "Digit grouping mode %s." + (if calculator-radix-grouping-mode "ON" "OFF"))) + (t + (setq calculator-displayers + (if (and new-disp (memq new-disp calculator-displayers)) + (let ((tmp nil)) + (while (not (eq (car calculator-displayers) new-disp)) + (setq tmp (cons (car calculator-displayers) tmp)) + (setq calculator-displayers + (cdr calculator-displayers))) + (setq calculator-displayers + (nconc calculator-displayers (nreverse tmp)))) + (nconc (cdr calculator-displayers) + (list (car calculator-displayers))))) + (calculator-message + "Using %s." (cadr (car calculator-displayers))))) (calculator-enter)) (defun calculator-rotate-displayer-back () - "Like `calculator-rotate-displayer', but rotates modes back." + "Like `calculator-rotate-displayer', but rotates modes back. +If radix output mode is active, toggle digit grouping." (interactive) (calculator-rotate-displayer (car (last calculator-displayers)))) (defun calculator-displayer-prev () "Send the current displayer function a 'left argument. This is used to modify display arguments (if the current displayer -function supports this)." +function supports this). +If radix output mode is active, increase the grouping size." (interactive) - (and (car calculator-displayers) - (let ((disp (caar calculator-displayers))) - (cond ((symbolp disp) (funcall disp 'left)) - ((and (consp disp) (eq 'std (car disp))) - (calculator-standard-displayer 'left (cadr disp))))))) + (if calculator-output-radix + (progn (setq calculator-radix-grouping-digits + (1+ calculator-radix-grouping-digits)) + (calculator-enter)) + (and (car calculator-displayers) + (let ((disp (caar calculator-displayers))) + (cond + ((symbolp disp) (funcall disp 'left)) + ((and (consp disp) (eq 'std (car disp))) + (calculator-standard-displayer 'left (cadr disp)))))))) (defun calculator-displayer-next () "Send the current displayer function a 'right argument. This is used to modify display arguments (if the current displayer -function supports this)." +function supports this). +If radix output mode is active, decrease the grouping size." (interactive) - (and (car calculator-displayers) - (let ((disp (caar calculator-displayers))) - (cond ((symbolp disp) (funcall disp 'right)) - ((and (consp disp) (eq 'std (car disp))) - (calculator-standard-displayer 'right (cadr disp))))))) + (if calculator-output-radix + (progn (setq calculator-radix-grouping-digits + (max 2 (1- calculator-radix-grouping-digits))) + (calculator-enter)) + (and (car calculator-displayers) + (let ((disp (caar calculator-displayers))) + (cond + ((symbolp disp) (funcall disp 'right)) + ((and (consp disp) (eq 'std (car disp))) + (calculator-standard-displayer 'right (cadr disp)))))))) (defun calculator-remove-zeros (numstr) "Get a number string NUMSTR and remove unnecessary zeroes. @@ -995,7 +1056,7 @@ (calculator-remove-zeros str)) "e" (number-to-string exp)))))) -(defun calculator-num-to-string (num) +(defun calculator-number-to-string (num) "Convert NUM to a displayable string." (cond ((and (numberp num) calculator-output-radix) @@ -1015,6 +1076,14 @@ (?6 . "110") (?7 . "111"))))))) (string-match "^0*\\(.+\\)" s) (setq str (match-string 1 s)))) + (if calculator-radix-grouping-mode + (let ((d (/ (length str) calculator-radix-grouping-digits)) + (r (% (length str) calculator-radix-grouping-digits))) + (while (>= (setq d (1- d)) (if (zerop r) 1 0)) + (let ((i (+ r (* d calculator-radix-grouping-digits)))) + (setq str (concat (substring str 0 i) + calculator-radix-grouping-separator + (substring str i))))))) (upcase (if (and (not calculator-2s-complement) (< num 0)) (concat "-" str) @@ -1051,7 +1120,7 @@ ;; customizable display for a single value (caar calculator-displayers) calculator-displayer))) - (mapconcat 'calculator-num-to-string + (mapconcat 'calculator-number-to-string (reverse calculator-stack) " ")) " " @@ -1319,9 +1388,8 @@ (if (not (and op (= -1 (calculator-op-arity op)))) ;;(error "Binary operator without a first operand") (progn - (message "Binary operator without a first operand") - (if calculator-electric-mode - (progn (sit-for 1) (message nil))) + (calculator-message + "Binary operator without a first operand") (throw 'op-error nil))))) (calculator-reduce-stack (cond ((eq (nth 1 op) '\() 10) @@ -1334,9 +1402,7 @@ (not (numberp (car calculator-stack))))) ;;(error "Unterminated expression") (progn - (message "Unterminated expression") - (if calculator-electric-mode - (progn (sit-for 1) (message nil))) + (calculator-message "Unterminated expression") (throw 'op-error nil))) (setq calculator-stack (cons op calculator-stack)) (calculator-reduce-stack (calculator-op-prec op)) @@ -1540,7 +1606,7 @@ (setcdr as val) (setq calculator-registers (cons (cons reg val) calculator-registers))) - (message (format "[%c] := %S" reg val)))) + (calculator-message "[%c] := %S" reg val))) (defun calculator-put-value (val) "Paste VAL as if entered. @@ -1552,24 +1618,26 @@ (progn (calculator-clear-fragile) (setq calculator-curnum (let ((calculator-displayer "%S")) - (calculator-num-to-string val))) + (calculator-number-to-string val))) (calculator-update-display)))) (defun calculator-paste () "Paste a value from the `kill-ring'." (interactive) (calculator-put-value - (let ((str (current-kill 0))) - (and calculator-paste-decimals + (let ((str (replace-regexp-in-string + "^ *\\(.+[^ ]\\) *$" "\\1" (current-kill 0)))) + (and (not calculator-input-radix) + calculator-paste-decimals (string-match "\\([0-9]+\\)\\(\\.[0-9]+\\)?\\(e[0-9]+\\)?" str) (or (match-string 1 str) (match-string 2 str) (match-string 3 str)) - (setq str (concat (match-string 1 str) + (setq str (concat (or (match-string 1 str) "0") (or (match-string 2 str) ".0") - (match-string 3 str)))) - (condition-case nil (car (read-from-string str)) + (or (match-string 3 str) "")))) + (condition-case nil (calculator-string-to-number str) (error nil))))) (defun calculator-get-register (reg) @@ -1678,7 +1746,7 @@ (while (> x 0) (setq r (* r (truncate x))) (setq x (1- x))) - r)) + (+ 0.0 r))) (defun calculator-truncate (n) "Truncate N, return 0 in case of overflow."
--- a/lisp/calendar/calendar.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/calendar/calendar.el Sat Dec 25 02:00:25 2004 +0000 @@ -1660,6 +1660,13 @@ calendar." t) +(autoload 'view-other-diary-entries "diary-lib" + "Prepare and display buffer of diary entries from an alternative diary file. +Searches for entries that match ARG days, starting with the date indicated +by the cursor position in the displayed three-month calendar. +D-FILE specifies the file to use as the diary file." + t) + (autoload 'calendar-sunrise-sunset "solar" "Local time of sunrise and sunset for date under cursor." t)
--- a/lisp/calendar/diary-lib.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/calendar/diary-lib.el Sat Dec 25 02:00:25 2004 +0000 @@ -80,7 +80,7 @@ by the cursor position in the displayed three-month calendar. D-FILE specifies the file to use as the diary file." (interactive - (list (if arg (prefix-numeric-value arg) 1) + (list (prefix-numeric-value current-prefix-arg) (read-file-name "Enter diary file name: " default-directory nil t))) (let ((diary-file d-file)) (view-diary-entries arg))) @@ -841,11 +841,11 @@ After the entries are marked, the hooks `nongregorian-diary-marking-hook' and `mark-diary-entries-hook' are run." (interactive) - (setq mark-diary-entries-in-calendar t) (let ((marking-diary-entries t) file-glob-attrs marks) (save-excursion (set-buffer (find-file-noselect (diary-check-diary-file) t)) + (setq mark-diary-entries-in-calendar t) (message "Marking diary entries...") (setq file-glob-attrs (nth 1 (diary-pull-attrs nil '()))) (let ((d diary-date-forms)
--- a/lisp/descr-text.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/descr-text.el Sat Dec 25 02:00:25 2004 +0000 @@ -104,24 +104,11 @@ into widget buttons that call `describe-text-category' or `describe-face' when pushed." ;; Sort the properties by the size of their value. - (dolist (elt (sort (let ((ret nil) - (key nil) - (val nil) - (len nil)) + (dolist (elt (sort (let (ret) (while properties - (setq key (pop properties) - val (pop properties) - len 0) - (unless (or (memq key '(category face font-lock-face - syntax-table)) - (widgetp val)) - (setq val (pp-to-string val) - len (length val))) - (push (list key val len) ret)) + (push (list (pop properties) (pop properties)) ret)) ret) - (lambda (a b) - (< (nth 2 a) - (nth 2 b))))) + (lambda (a b) (string< (nth 0 a) (nth 0 b))))) (let ((key (nth 0 elt)) (value (nth 1 elt))) (widget-insert (propertize (format " %-20s " key) @@ -131,23 +118,15 @@ :notify `(lambda (&rest ignore) (describe-text-category ',value)) (format "%S" value))) - ((memq key '(face font-lock-face)) + ((memq key '(face font-lock-face mouse-face)) (widget-create 'link :notify `(lambda (&rest ignore) (describe-face ',value)) (format "%S" value))) - ((eq key 'syntax-table) - (widget-create 'push-button - :tag "show" - :action (lambda (widget &optional event) - (with-output-to-temp-buffer - "*Pp Eval Output*" - (pp (widget-get widget :value)))) - value)) ((widgetp value) (describe-text-widget value)) (t - (widget-insert value)))) + (describe-text-sexp value)))) (widget-insert "\n"))) ;;; Describe-Text Commands. @@ -544,10 +523,17 @@ (dotimes (i (length disp-vector)) (setq char (aref disp-vector i)) (aset disp-vector i - (cons char (describe-char-display pos char)))) + (cons char (describe-char-display + pos (logand char #x7ffff))))) (format "by display table entry [%s] (see below)" - (mapconcat #'(lambda (x) (format "?%c" (car x))) - disp-vector " "))) + (mapconcat + #'(lambda (x) + (if (> (car x) #x7ffff) + (format "?%c<face-id=%s>" + (logand (car x) #x7ffff) + (lsh (car x) -19)) + (format "?%c" (car x)))) + disp-vector " "))) (composition (let ((from (car composition)) (to (nth 1 composition)) @@ -618,7 +604,7 @@ (progn (insert "these fonts (glyph codes):\n") (dotimes (i (length disp-vector)) - (insert (car (aref disp-vector i)) ?: + (insert (logand (car (aref disp-vector i)) #x7ffff) ?: (propertize " " 'display '(space :align-to 5)) (if (cdr (aref disp-vector i)) (format "%s (0x%02X)" (cadr (aref disp-vector i))
--- a/lisp/dired.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/dired.el Sat Dec 25 02:00:25 2004 +0000 @@ -1104,6 +1104,7 @@ (let ((map (make-keymap))) (suppress-keymap map) (define-key map [mouse-2] 'dired-mouse-find-file-other-window) + (define-key map [follow-link] 'mouse-face) ;; Commands to mark or flag certain categories of files (define-key map "#" 'dired-flag-auto-save-files) (define-key map "." 'dired-clean-directory)
--- a/lisp/emacs-lisp/bytecomp.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/emacs-lisp/bytecomp.el Sat Dec 25 02:00:25 2004 +0000 @@ -2178,7 +2178,7 @@ (let ((old-load-list current-load-list) (args (mapcar 'eval (cdr form)))) (apply 'require args) - ;; Detech (require 'cl) in a way that works even if cl is already loaded. + ;; Detect (require 'cl) in a way that works even if cl is already loaded. (if (member (car args) '("cl" cl)) (setq byte-compile-warnings (remq 'cl-functions byte-compile-warnings))))
--- a/lisp/emacs-lisp/lisp.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/emacs-lisp/lisp.el Sat Dec 25 02:00:25 2004 +0000 @@ -192,8 +192,7 @@ If variable `beginning-of-defun-function' is non-nil, its value is called as a function to find the defun's beginning." (interactive "p") - (or inhibit-mark-movement - (not (eq this-command 'beginning-of-defun)) + (or (not (eq this-command 'beginning-of-defun)) (eq last-command 'beginning-of-defun) (and transient-mark-mode mark-active) (push-mark)) @@ -245,8 +244,7 @@ If variable `end-of-defun-function' is non-nil, its value is called as a function to find the defun's end." (interactive "p") - (or inhibit-mark-movement - (not (eq this-command 'end-of-defun)) + (or (not (eq this-command 'end-of-defun)) (eq last-command 'end-of-defun) (and transient-mark-mode mark-active) (push-mark))
--- a/lisp/emulation/cua-base.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/emulation/cua-base.el Sat Dec 25 02:00:25 2004 +0000 @@ -1003,14 +1003,6 @@ (defvar cua-movement-commands nil "User may add additional movement commands to this list.") -(defvar cua--preserve-mark-commands - '(end-of-buffer beginning-of-buffer) - "List of movement commands that move the mark. -CUA will preserve the previous mark position if a mark is already -active before one of these commands is executed.") - -(defvar cua--undo-push-mark nil) - ;;; Scrolling commands which does not signal errors at top/bottom ;;; of buffer at first key-press (instead moves to top/bottom ;;; of buffer). @@ -1100,11 +1092,7 @@ (aref (if window-system (this-single-command-raw-keys) (this-single-command-keys)) 0))) - (if mark-active - (if (and (memq this-command cua--preserve-mark-commands) - (not inhibit-mark-movement)) - (setq cua--undo-push-mark t - inhibit-mark-movement t)) + (unless mark-active (push-mark-command nil t)) (setq cua--last-region-shifted t) (setq cua--explicit-region-start nil)) @@ -1151,9 +1139,6 @@ (defun cua--post-command-handler () (condition-case nil (progn - (when cua--undo-push-mark - (setq cua--undo-push-mark nil - inhibit-mark-movement nil)) (when cua--global-mark-active (cua--global-mark-post-command)) (when (fboundp 'cua--rectangle-post-command)
--- a/lisp/faces.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/faces.el Sat Dec 25 02:00:25 2004 +0000 @@ -1784,7 +1784,7 @@ (defface mode-line - '((((type x w32 mac) (class color)) + '((((class color) (min-colors 88)) :box (:line-width -1 :style released-button) :background "grey75" :foreground "black") (t @@ -1797,11 +1797,11 @@ (defface mode-line-inactive '((default :inherit mode-line) - (((type x w32 mac) (background light) (class color)) + (((class color) (min-colors 88) (background light)) :weight light :box (:line-width -1 :color "grey75" :style nil) :foreground "grey20" :background "grey90") - (((type x w32 mac) (background dark) (class color)) + (((class color) (min-colors 88) (background dark) ) :weight light :box (:line-width -1 :color "grey40" :style nil) :foreground "grey80" :background "grey30")) @@ -2032,8 +2032,8 @@ (defface escape-glyph '((((background dark)) :foreground "cyan") (((type pc)) :foreground "magenta") - (t :foreground "dark blue")) - "Face for displaying \\ and ^ in multichar glyphs." + (t :foreground "blue")) + "Face for characters displayed as ^-sequences or \-sequences." :group 'basic-faces) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
--- a/lisp/gnus/ChangeLog Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/gnus/ChangeLog Sat Dec 25 02:00:25 2004 +0000 @@ -1,3 +1,9 @@ +2004-12-17 Kim F. Storm <storm@cua.dk> + + * gnus-group.el (gnus-group-mode-map): Map follow-link to mouse-face. + + * gnus-sum.el (gnus-summary-mode-map): Likewise. + 2004-12-08 Stefan Monnier <monnier@iro.umontreal.ca> * gnus-art.el (gnus-narrow-to-page): Don't hardcode point-min. @@ -905,7 +911,7 @@ * gnus-delay.el (gnus-delay-default-hour): Add :version. * gnus-cite.el (gnus-cite-blank-line-after-header) - (gnus-article-boring-faces): + (gnus-article-boring-faces): * gnus-art.el (gnus-buttonized-mime-types) (gnus-inhibit-mime-unbuttonizing)
--- a/lisp/gnus/gnus-group.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/gnus/gnus-group.el Sat Dec 25 02:00:25 2004 +0000 @@ -591,6 +591,7 @@ "\M-e" gnus-group-edit-group-method "^" gnus-group-enter-server-mode gnus-mouse-2 gnus-mouse-pick-group + [follow-link] mouse-face "<" beginning-of-buffer ">" end-of-buffer "\C-c\C-b" gnus-bug
--- a/lisp/gnus/gnus-sum.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/gnus/gnus-sum.el Sat Dec 25 02:00:25 2004 +0000 @@ -1703,6 +1703,7 @@ "Q" gnus-summary-exit-no-update "\C-c\C-i" gnus-info-find-node gnus-mouse-2 gnus-mouse-pick-article + [follow-link] mouse-face "m" gnus-summary-mail-other-window "a" gnus-summary-post-news "i" gnus-summary-news-other-window @@ -5096,7 +5097,7 @@ (when gnus-agent (gnus-agent-possibly-alter-active group (gnus-active group) info) - + (setq gnus-summary-use-undownloaded-faces (gnus-agent-find-parameter group @@ -7044,7 +7045,7 @@ (gnus-summary-goto-subject article t))) (gnus-summary-limit (append articles gnus-newsgroup-limit)) (gnus-summary-position-point)) - + (defun gnus-summary-goto-subject (article &optional force silent) "Go the subject line of ARTICLE. If FORCE, also allow jumping to articles not currently shown." @@ -9140,7 +9141,7 @@ ;;;!!!Why is this necessary? (set-buffer gnus-summary-buffer) - + (gnus-summary-goto-subject article) (when (eq action 'move) (gnus-summary-mark-article article gnus-canceled-mark))))
--- a/lisp/help-fns.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/help-fns.el Sat Dec 25 02:00:25 2004 +0000 @@ -478,8 +478,13 @@ (and (symbolp obj) (boundp obj) obj)))) (error nil)) (let* ((str (find-tag-default)) - (obj (if str (intern str)))) - (and (symbolp obj) (boundp obj) obj)) + (sym (if str (intern-soft str)))) + (if (and sym (boundp sym)) + sym + (save-match-data + (when (and str (string-match "\\`\\W*\\(.*?\\)\\W*\\'" str)) + (setq sym (intern-soft (match-string 1 str))) + (and (boundp sym) sym))))) 0)) ;;;###autoload @@ -564,6 +569,7 @@ (insert " value is shown ") (insert-button "below" 'action help-button-cache + 'follow-link t 'help-echo "mouse-2, RET: show value") (insert ".\n\n"))) ;; Add a note for variables that have been make-var-buffer-local.
--- a/lisp/help-mode.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/help-mode.el Sat Dec 25 02:00:25 2004 +0000 @@ -68,6 +68,7 @@ ;; Button types used by help (define-button-type 'help-xref + 'follow-link t 'action #'help-button-action) (defun help-button-action (button)
--- a/lisp/help.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/help.el Sat Dec 25 02:00:25 2004 +0000 @@ -267,8 +267,13 @@ (and (symbolp obj) (fboundp obj) obj)))) (error nil)))) (let* ((str (find-tag-default)) - (obj (if str (intern str)))) - (and (symbolp obj) (fboundp obj) obj)))) + (sym (if str (intern-soft str)))) + (if (and sym (fboundp sym)) + sym + (save-match-data + (when (and str (string-match "\\`\\W*\\(.*?\\)\\W*\\'" str)) + (setq sym (intern-soft (match-string 1 str))) + (and (fboundp sym) sym))))))) ;;; `User' help functions @@ -609,17 +614,58 @@ (princ "\n which is ") (describe-function-1 defn) (when up-event - (let ((defn (or (string-key-binding up-event) (key-binding up-event)))) + (let ((ev (aref up-event 0)) + (descr (key-description up-event)) + (hdr "\n\n-------------- up event ---------------\n\n") + defn + mouse-1-tricky mouse-1-remapped) + (when (and (consp ev) + (eq (car ev) 'mouse-1) + (windowp window) + mouse-1-click-follows-link + (not (eq mouse-1-click-follows-link 'double)) + (with-current-buffer (window-buffer window) + (mouse-on-link-p (posn-point (event-start ev))))) + (setq mouse-1-tricky (integerp mouse-1-click-follows-link) + mouse-1-remapped (or (not mouse-1-tricky) + (> mouse-1-click-follows-link 0))) + (if mouse-1-remapped + (setcar ev 'mouse-2))) + (setq defn (or (string-key-binding up-event) (key-binding up-event))) (unless (or (null defn) (integerp defn) (equal defn 'undefined)) - (princ "\n\n-------------- up event ---------------\n\n") - (princ (key-description up-event)) + (princ (if mouse-1-tricky + "\n\n----------------- up-event (short click) ----------------\n\n" + hdr)) + (setq hdr nil) + (princ descr) (if (windowp window) (princ " at that spot")) + (if mouse-1-remapped + (princ " is remapped to <mouse-2>\n which" )) (princ " runs the command ") (prin1 defn) (princ "\n which is ") - (describe-function-1 defn)))) - (print-help-return-message))))))) + (describe-function-1 defn)) + (when mouse-1-tricky + (setcar ev + (if (> mouse-1-click-follows-link 0) 'mouse-1 'mouse-2)) + (setq defn (or (string-key-binding up-event) (key-binding up-event))) + (unless (or (null defn) (integerp defn) (equal defn 'undefined)) + (princ (or hdr + "\n\n----------------- up-event (long click) ----------------\n\n")) + (princ "Pressing ") + (princ descr) + (if (windowp window) + (princ " at that spot")) + (princ (format " for longer than %d milli-seconds\n" + (abs mouse-1-click-follows-link))) + (if (not mouse-1-remapped) + (princ " remaps it to <mouse-2> which" )) + (princ " runs the command ") + (prin1 defn) + (princ "\n which is ") + (describe-function-1 defn)))) + (print-help-return-message)))))))) (defun describe-mode (&optional buffer) @@ -692,6 +738,7 @@ (princ " ") (insert-button pretty-minor-mode 'action (car help-button-cache) + 'follow-link t 'help-echo "mouse-2, RET: show full information") (princ (format " minor mode (%s):\n" (if indicator
--- a/lisp/info-look.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/info-look.el Sat Dec 25 02:00:25 2004 +0000 @@ -47,7 +47,7 @@ "Non-nil means pop up the Info buffer in another window." :group 'info-lookup :type 'boolean) -(defcustom info-lookup-highlight-face 'highlight +(defcustom info-lookup-highlight-face 'match "Face for highlighting looked up help items. Setting this variable to nil disables highlighting." :group 'info-lookup :type 'face)
--- a/lisp/international/quail.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/international/quail.el Sat Dec 25 02:00:25 2004 +0000 @@ -1359,11 +1359,12 @@ (while quail-translating (set-buffer-modified-p modified-p) (quail-show-guidance) - (let* ((keyseq (read-key-sequence - (and input-method-use-echo-area - (concat input-method-previous-message - quail-current-str)) - nil nil t)) + (let* ((prompt (if input-method-use-echo-area + (format "%s%s %s" + (or input-method-previous-message "") + quail-current-str + quail-guidance-str))) + (keyseq (read-key-sequence prompt nil nil t)) (cmd (lookup-key (quail-translation-keymap) keyseq))) (if (if key (and (commandp cmd) (not (eq cmd 'quail-other-command))) @@ -1424,12 +1425,13 @@ quail-translating t) (quail-setup-overlays nil))) (quail-show-guidance) - (let* ((keyseq (read-key-sequence - (and input-method-use-echo-area - (concat input-method-previous-message - quail-conversion-str - quail-current-str)) - nil nil t)) + (let* ((prompt (if input-method-use-echo-area + (format "%s%s%s %s" + (or input-method-previous-message "") + quail-conversion-str + quail-current-str + quail-guidance-str))) + (keyseq (read-key-sequence prompt nil nil t)) (cmd (lookup-key (quail-conversion-keymap) keyseq))) (if (if key (commandp cmd) (eq cmd 'quail-self-insert-command)) (progn @@ -1938,10 +1940,10 @@ ;; Then, show the guidance. (when (and (quail-require-guidance-buf) + (not input-method-use-echo-area) (null unread-command-events) (null unread-post-input-method-events)) - (if (or (eq (selected-window) (minibuffer-window)) - input-method-use-echo-area) + (if (eq (selected-window) (minibuffer-window)) (if (eq (minibuffer-window) (frame-root-window)) ;; Use another frame. It is sure that we are using some ;; window system.
--- a/lisp/isearch.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/isearch.el Sat Dec 25 02:00:25 2004 +0000 @@ -649,7 +649,7 @@ (setq ;; quit-flag nil not for isearch-mode isearch-adjusted nil isearch-yank-flag nil) - (isearch-lazy-highlight-new-loop) + (if isearch-lazy-highlight (isearch-lazy-highlight-new-loop)) ;; We must prevent the point moving to the end of composition when a ;; part of the composition has just been searched. (setq disable-point-adjustment t)) @@ -2329,8 +2329,7 @@ "Cleanup any previous `isearch-lazy-highlight' loop and begin a new one. This happens when `isearch-update' is invoked (which can cause the search string to change or the window to scroll)." - (when (and isearch-lazy-highlight - (null executing-kbd-macro) + (when (and (null executing-kbd-macro) (sit-for 0) ;make sure (window-start) is credible (or (not (equal isearch-string isearch-lazy-highlight-last-string))
--- a/lisp/mouse.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/mouse.el Sat Dec 25 02:00:25 2004 +0000 @@ -49,6 +49,39 @@ :version "21.4" :group 'mouse) +(defcustom mouse-1-click-follows-link 350 + "Non-nil means that clicking Mouse-1 on a link follows the link. + +With the default setting, an ordinary Mouse-1 click on a link +performs the same action as Mouse-2 on that link, while a longer +Mouse-1 click \(hold down the Mouse-1 button for more than 350 +milliseconds) performs the original Mouse-1 binding \(which +typically sets point where you click the mouse). + +If value is an integer, the time elapsed between pressing and +releasing the mouse button determines whether to follow the link +or perform the normal Mouse-1 action (typically set point). +The absolute numeric value specifices the maximum duration of a +\"short click\" in milliseconds. A positive value means that a +short click follows the link, and a longer click performs the +normal action. A negative value gives the opposite behaviour. + +If value is `double', a double click follows the link. + +Otherwise, a single Mouse-1 click unconditionally follows the link. + +Note that dragging the mouse never follows the link. + +This feature only works in modes that specifically identify +clickable text as links, so it may not work with some external +packages. See `mouse-on-link-p' for details." + :version "21.4" + :type '(choice (const :tag "Disabled" nil) + (const :tag "Double click" double) + (number :tag "Single click time limit" :value 350) + (other :tag "Single click" t)) + :group 'mouse) + ;; Provide a mode-specific menu on a mouse button. @@ -733,6 +766,51 @@ (run-hooks 'mouse-leave-buffer-hook) (mouse-drag-region-1 start-event)))) + +(defun mouse-on-link-p (pos) + "Return non-nil if POS is on a link in the current buffer. + +A clickable link is identified by one of the following methods: + +1) If the character at POS has a non-nil `follow-link' text or +overlay property, the value of that property is returned. + +2) If there is a local key-binding or a keybinding at position +POS for the `follow-link' event, the binding of that event +determines whether POS is inside a link: + +- If the binding is `mouse-face', POS is inside a link if there +is a non-nil `mouse-face' property at POS. Return t in this case. + +- If the binding is a function, FUNC, POS is inside a link if +the call \(FUNC POS) returns non-nil. Return the return value +from that call. + +- Otherwise, return the binding of the `follow-link' binding. + +The return value is interpreted as follows: + +- If it is a string, the mouse-1 event is translated into the +first character of the string, i.e. the action of the mouse-1 +click is the local or global binding of that character. + +- If it is a vector, the mouse-1 event is translated into the +first element of that vector, i.e. the action of the mouse-1 +click is the local or global binding of that event. + +- Otherwise, the mouse-1 event is translated into a mouse-2 event +at the same position." + (or (get-char-property pos 'follow-link) + (save-excursion + (goto-char pos) + (let ((b (key-binding [follow-link] nil t))) + (cond + ((eq b 'mouse-face) + (and (get-char-property pos 'mouse-face) t)) + ((functionp b) + (funcall b pos)) + (t b)))))) + (defun mouse-drag-region-1 (start-event) (mouse-minibuffer-check start-event) (let* ((echo-keystrokes 0) @@ -749,6 +827,7 @@ (nth 3 bounds) ;; Don't count the mode line. (1- (nth 3 bounds)))) + on-link remap-double-click (click-count (1- (event-click-count start-event)))) (setq mouse-selection-click-count click-count) (setq mouse-selection-click-count-buffer (current-buffer)) @@ -758,6 +837,13 @@ (if (< (point) start-point) (goto-char start-point)) (setq start-point (point)) + (setq on-link (and mouse-1-click-follows-link + (mouse-on-link-p start-point))) + (setq remap-double-click (and on-link + (eq mouse-1-click-follows-link 'double) + (= click-count 1))) + (if remap-double-click ;; Don't expand mouse overlay in links + (setq click-count 0)) (let ((range (mouse-start-end start-point start-point click-count))) (move-overlay mouse-drag-overlay (car range) (nth 1 range) (window-buffer start-window)) @@ -880,6 +966,28 @@ (or end-point (= (window-start start-window) start-window-start))) + (if (and on-link + (not end-point) + (consp event) + (or remap-double-click + (and + (not (eq mouse-1-click-follows-link 'double)) + (= click-count 0) + (= (event-click-count event) 1) + (not (input-pending-p)) + (or (not (integerp mouse-1-click-follows-link)) + (let ((t0 (posn-timestamp (event-start start-event))) + (t1 (posn-timestamp (event-end event)))) + (and (integerp t0) (integerp t1) + (if (> mouse-1-click-follows-link 0) + (<= (- t1 t0) mouse-1-click-follows-link) + (< (- t0 t1) mouse-1-click-follows-link))))) + (or (not double-click-time) + (sit-for 0 (if (integerp double-click-time) + double-click-time 500) t))))) + (if (or (vectorp on-link) (stringp on-link)) + (setq event (aref on-link 0)) + (setcar event 'mouse-2))) (setq unread-command-events (cons event unread-command-events))))) (delete-overlay mouse-drag-overlay)))))
--- a/lisp/net/tramp-smb.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/net/tramp-smb.el Sat Dec 25 02:00:25 2004 +0000 @@ -1105,9 +1105,11 @@ ;; Do `PC-do-completion' without substitution (let* (save) (fset 'save (symbol-function 'substitute-in-file-name)) - (fset 'substitute-in-file-name (symbol-function 'identity)) - ad-do-it - (fset 'substitute-in-file-name (symbol-function 'save))) + (unwind-protect + (progn + (fset 'substitute-in-file-name (symbol-function 'identity)) + ad-do-it) + (fset 'substitute-in-file-name (symbol-function 'save)))) ;; Expand "$" (let* ((beg (or (and (functionp 'minibuffer-prompt-end) ; Emacs 21
--- a/lisp/net/tramp.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/net/tramp.el Sat Dec 25 02:00:25 2004 +0000 @@ -34,7 +34,7 @@ ;; ;; Notes: ;; ----- -;; +;; ;; This package only works for Emacs 20 and higher, and for XEmacs 21 ;; and higher. (XEmacs 20 is missing the `with-timeout' macro. Emacs ;; 19 is reported to have other problems. For XEmacs 21, you need the @@ -205,7 +205,7 @@ gives the same backup policy for Tramp files on their hosts like the policy for local files." - :type '(repeat + :type '(repeat (list (regexp :tag "File regexp") (string :tag "Backup Dir") (set :inline t @@ -506,7 +506,7 @@ (tramp-copy-args nil) (tramp-copy-keep-date-arg "-p") (tramp-password-end-of-line "xy")) ;see docstring for "xy" - ("fcp" + ("fcp" (tramp-connection-function tramp-open-connection-rsh) (tramp-login-program "fsh") (tramp-copy-program "fcp") @@ -633,7 +633,7 @@ ("rsh" tramp-multi-connect-rlogin "rsh %h -l %u%n") ("remsh" tramp-multi-connect-rlogin "remsh %h -l %u%n") ("ssh" tramp-multi-connect-rlogin "ssh %h -l %u%n") - ("ssht" tramp-multi-connect-rlogin "ssh %h -e none -t -t -l %u%n") + ("ssht" tramp-multi-connect-rlogin "ssh %h -e none -t -t -l %u%n") ("su" tramp-multi-connect-su "su - %u%n") ("sudo" tramp-multi-connect-su "sudo -u %u -s -p Password:%n")) "*List of connection functions for multi-hop methods. @@ -777,7 +777,7 @@ "sudo" tramp-completion-function-alist-su) (tramp-set-completion-function "multi" nil) - (tramp-set-completion-function + (tramp-set-completion-function "scpx" tramp-completion-function-alist-ssh) (tramp-set-completion-function "sshx" tramp-completion-function-alist-ssh) @@ -1536,9 +1536,9 @@ rm -f /tmp/tramp.$$ }" "Shell function to implement `uudecode' to standard output. -Many systems support `uudecode -o /dev/stdout' for this or -`uudecode -o -' or `uudecode -p', but some systems don't, and for -them we have this shell function.") +Many systems support `uudecode -o /dev/stdout' or `uudecode -o -' +for this or `uudecode -p', but some systems don't, and for them +we have this shell function.") ;; Perl script to implement `file-attributes' in a Lisp `read'able ;; output. If you are hacking on this, note that you get *no* output @@ -1960,10 +1960,9 @@ (put 'with-parsed-tramp-file-name 'lisp-indent-function 2) ;; To be activated for debugging containing this macro ;; It works only when VAR is nil. Otherwise, it can be deactivated by -;; (def-edebug-spec with-parsed-tramp-file-name 0) +;; (put 'with-parsed-tramp-file-name 'edebug-form-spec 0) ;; I'm too stupid to write a precise SPEC for it. -(if (functionp 'def-edebug-spec) - (def-edebug-spec with-parsed-tramp-file-name t)) +(put 'with-parsed-tramp-file-name 'edebug-form-spec t) (defmacro tramp-let-maybe (variable value &rest body) "Let-bind VARIABLE to VALUE in BODY, but only if VARIABLE is not obsolete. @@ -2056,7 +2055,7 @@ (setq filename (tramp-file-name-localname (tramp-dissect-file-name (expand-file-name filename))))) - + ;; Right, they are on the same host, regardless of user, method, etc. ;; We now make the link on the remote machine. This will occur as the user ;; that FILENAME belongs to. @@ -2065,7 +2064,7 @@ l-multi-method l-method l-user l-host (format "cd %s && %s -sf %s %s" cwd ln - filename + filename l-localname) t))))) @@ -2347,9 +2346,9 @@ "file attributes with perl: %s" (tramp-make-tramp-file-name multi-method method user host localname)) - (tramp-maybe-send-perl-script tramp-perl-file-attributes - "tramp_file_attributes" - multi-method method user host) + (tramp-maybe-send-perl-script multi-method method user host + tramp-perl-file-attributes + "tramp_file_attributes") (tramp-send-command multi-method method user host (format "tramp_file_attributes %s %s" (tramp-shell-quote-argument localname) id-format)) @@ -2394,7 +2393,12 @@ ;; This function makes the same assumption as ;; `tramp-handle-set-visited-file-modtime'. (defun tramp-handle-verify-visited-file-modtime (buf) - "Like `verify-visited-file-modtime' for tramp files." + "Like `verify-visited-file-modtime' for tramp files. +At the time `verify-visited-file-modtime' calls this function, we +already know that the buffer is visiting a file and that +`visited-file-modtime' does not return 0. Do not call this +function directly, unless those two cases are already taken care +of." (with-current-buffer buf ;; There is no file visiting the buffer, or the buffer has no ;; recorded last modification time. @@ -2406,7 +2410,7 @@ (let* ((attr (file-attributes f)) (modtime (nth 5 attr)) (mt (visited-file-modtime))) - + (cond ;; file exists, and has a known modtime. ((and attr (not (equal modtime '(0 0)))) @@ -2689,9 +2693,9 @@ (save-excursion (setq directory (tramp-handle-expand-file-name directory)) (with-parsed-tramp-file-name directory nil - (tramp-maybe-send-perl-script tramp-perl-directory-files-and-attributes - "tramp_directory_files_and_attributes" - multi-method method user host) + (tramp-maybe-send-perl-script multi-method method user host + tramp-perl-directory-files-and-attributes + "tramp_directory_files_and_attributes") (tramp-send-command multi-method method user host (format "tramp_directory_files_and_attributes %s %s" (tramp-shell-quote-argument localname) @@ -2753,7 +2757,7 @@ (push (buffer-substring (point) (tramp-line-end-position)) result)) - + (tramp-send-command multi-method method user host "cd") (tramp-wait-for-output) @@ -3096,6 +3100,12 @@ ;; Use an asynchronous process. By this, password can be handled. (save-excursion + + ;; Check for program. + (when (and (fboundp 'executable-find) + (not (executable-find copy-program))) + (error "Cannot find copy program: %s" copy-program)) + (set-buffer trampbuf) (setq tramp-current-multi-method multi-method tramp-current-method method @@ -3170,15 +3180,15 @@ 'file-error (list "Removing old file name" "no such directory" filename))) ;; Which is better, -r or -R? (-r works for me <daniel@danann.net>) - (tramp-send-command multi-method method user host + (tramp-send-command multi-method method user host (format "rm -r %s" (tramp-shell-quote-argument localname))) ;; Wait for the remote system to return to us... ;; This might take a while, allow it plenty of time. (tramp-wait-for-output 120) ;; Make sure that it worked... (and (file-exists-p filename) - (error "Failed to recusively delete %s" filename)))) - + (error "Failed to recursively delete %s" filename)))) + (defun tramp-handle-dired-call-process (program discard &rest arguments) "Like `dired-call-process' for tramp files." (with-parsed-tramp-file-name default-directory nil @@ -3200,7 +3210,7 @@ (tramp-send-command-and-check multi-method method user host nil) (tramp-send-command multi-method method user host "cd") (tramp-wait-for-output))))) - + (defun tramp-handle-dired-compress-file (file &rest ok-flag) "Like `dired-compress-file' for tramp files." ;; OK-FLAG is valid for XEmacs only, but not implemented. @@ -3568,7 +3578,7 @@ (when (and (numberp buffer) (zerop buffer)) (error "Implementation does not handle immediate return")) (when (consp buffer) (error "Implementation does not handle error files")) - (shell-command + (shell-command (mapconcat 'tramp-shell-quote-argument (cons program args) " ") @@ -4250,7 +4260,7 @@ ;; `tramp-completion-file-name-regexp-unified' aren't different. ;; If nil, `tramp-completion-run-real-handler' is called (i.e. forwarding to ;; `tramp-file-name-handler'). Otherwise, it takes `tramp-run-real-handler'. -;; Using `last-input-event' is a little bit risky, because completing a file +;; Using `last-input-event' is a little bit risky, because completing a file ;; might require loading other files, like "~/.netrc", and for them it ;; shouldn't be decided based on that variable. On the other hand, those files ;; shouldn't have partial tramp file name syntax. Maybe another variable should @@ -4354,7 +4364,7 @@ (funcall (nth 0 x) (nth 1 x))))) (tramp-get-completion-function m)) - (setq result (append result + (setq result (append result (mapcar (lambda (x) (tramp-get-completion-user-host @@ -4395,7 +4405,7 @@ ;; [nil nil "x" nil nil] ;; [nil "x" nil nil nil] -;; "/x:" "/x:y" "/x:y:" +;; "/x:" "/x:y" "/x:y:" ;; [nil nil nil "x" ""] [nil nil nil "x" "y"] [nil "x" nil "y" ""] ;; "/[x/" "/[x/y" ;; [nil "x" nil "" nil] [nil "x" nil "y" nil] @@ -4769,7 +4779,7 @@ ;;; Internal Functions: -(defun tramp-maybe-send-perl-script (script name multi-method method user host) +(defun tramp-maybe-send-perl-script (multi-method method user host script name) "Define in remote shell function NAME implemented as perl SCRIPT. Only send the definition if it has not already been done. Function may have 0-3 parameters." @@ -4864,7 +4874,7 @@ "touch" nil (current-buffer) nil "-t" touch-time file)) (pop-to-buffer (current-buffer)) (error "tramp-touch: touch failed")))))) - + (defun tramp-buffer-name (multi-method method user host) "A name for the connection buffer for USER at HOST using METHOD." (if multi-method @@ -5022,7 +5032,7 @@ (file-exists-p existing) (not (file-exists-p nonexisting)))) (error "Couldn't find command to check if file exists.")))) - + ;; CCC test ksh or bash found for tilde expansion? (defun tramp-find-shell (multi-method method user host) @@ -5121,9 +5131,9 @@ (tramp-check-ls-commands multi-method method user host "gnuls" tramp-remote-path) (tramp-check-ls-commands multi-method method user host "gls" tramp-remote-path))) -;; ------------------------------------------------------------ -;; -- Functions for establishing connection -- -;; ------------------------------------------------------------ +;; ------------------------------------------------------------ +;; -- Functions for establishing connection -- +;; ------------------------------------------------------------ ;; The following functions are actions to be taken when seeing certain ;; prompts from the remote host. See the variable @@ -5364,7 +5374,7 @@ (when multi-method (error "Cannot multi-connect using telnet connection method")) (tramp-pre-connection multi-method method user host) - (tramp-message 7 "Opening connection for %s@%s using %s..." + (tramp-message 7 "Opening connection for %s@%s using %s..." (or user (user-login-name)) host method) (let ((process-environment (copy-sequence process-environment))) (setenv "TERM" tramp-terminal-type) @@ -5398,7 +5408,7 @@ p multi-method method user host) (tramp-post-connection multi-method method user host))))) - + (defun tramp-open-connection-rsh (multi-method method user host) "Open a connection using an rsh METHOD. This starts the command `rsh HOST -l USER'[*], then waits for a remote @@ -5423,7 +5433,7 @@ (error "Cannot multi-connect using rsh connection method")) (tramp-pre-connection multi-method method user host) (if (and user (not (string= user ""))) - (tramp-message 7 "Opening connection for %s@%s using %s..." + (tramp-message 7 "Opening connection for %s@%s using %s..." user host method) (tramp-message 7 "Opening connection at %s using %s..." host method)) (let ((process-environment (copy-sequence process-environment)) @@ -5452,9 +5462,9 @@ (> emacs-major-version 20)) tramp-dos-coding-system)) (p (if (and user (not (string= user ""))) - (apply #'start-process bufnam buf login-program + (apply #'start-process bufnam buf login-program real-host "-l" user login-args) - (apply #'start-process bufnam buf login-program + (apply #'start-process bufnam buf login-program real-host login-args))) (found nil)) (tramp-set-process-query-on-exit-flag p nil) @@ -5524,10 +5534,10 @@ tramp-actions-before-shell) (tramp-open-connection-setup-interactive-shell p multi-method method user host) - (tramp-post-connection multi-method method + (tramp-post-connection multi-method method user host))))) -;; HHH: Not Changed. Multi method. It is not clear to me how this can +;; HHH: Not Changed. Multi method. It is not clear to me how this can ;; handle not giving a user name in the "file name". ;; ;; This is more difficult than for the single-hop method. In the @@ -5597,7 +5607,7 @@ (tramp-post-connection multi-method method user host))))) ;; HHH: Changed. Multi method. Don't know how to handle this in the case -;; of no user name provided. Hack to make it work as it did before: +;; of no user name provided. Hack to make it work as it did before: ;; changed `user' to `(or user (user-login-name))' in the places where ;; the value is actually used. (defun tramp-multi-connect-telnet (p method user host command) @@ -5619,8 +5629,8 @@ (tramp-process-multi-actions p method user host tramp-multi-actions))) -;; HHH: Changed. Multi method. Don't know how to handle this in the case -;; of no user name provided. Hack to make it work as it did before: +;; HHH: Changed. Multi method. Don't know how to handle this in the case +;; of no user name provided. Hack to make it work as it did before: ;; changed `user' to `(or user (user-login-name))' in the places where ;; the value is actually used. (defun tramp-multi-connect-rlogin (p method user host command) @@ -5645,8 +5655,8 @@ (tramp-process-multi-actions p method user host tramp-multi-actions))) -;; HHH: Changed. Multi method. Don't know how to handle this in the case -;; of no user name provided. Hack to make it work as it did before: +;; HHH: Changed. Multi method. Don't know how to handle this in the case +;; of no user name provided. Hack to make it work as it did before: ;; changed `user' to `(or user (user-login-name))' in the places where ;; the value is actually used. (defun tramp-multi-connect-su (p method user host command) @@ -6276,7 +6286,7 @@ (tramp-barf-if-no-shell-prompt nil 30 "Couldn't `%s', see buffer `%s'" command (buffer-name))) - + (defun tramp-wait-for-output (&optional timeout) "Wait for output from remote rsh command." (let ((proc (get-buffer-process (current-buffer))) @@ -6609,9 +6619,9 @@ "")) -;; ------------------------------------------------------------ -;; -- TRAMP file names -- -;; ------------------------------------------------------------ +;; ------------------------------------------------------------ +;; -- TRAMP file names -- +;; ------------------------------------------------------------ ;; Conversion functions between external representation and ;; internal data structure. Convenience functions for internal ;; data structure. @@ -6622,7 +6632,7 @@ "Return t iff NAME is a tramp file." (save-match-data (string-match tramp-file-name-regexp name))) - + ;; HHH: Changed. Used to assign the return value of (user-login-name) ;; to the `user' part of the structure if a user name was not ;; provided, now it assigns nil. @@ -6675,7 +6685,7 @@ If both MULTI-METHOD and METHOD are nil, do a lookup in `tramp-default-method-alist'." (or multi-method method (tramp-find-default-method user host))) - + ;; HHH: Not Changed. Multi method. Will probably not handle the case where ;; a user name is not provided in the "file name" very well. (defun tramp-dissect-multi-file-name (name) @@ -6847,7 +6857,7 @@ (if entry (second entry) (symbol-value param)))) - + ;; Auto saving to a special directory. @@ -7039,9 +7049,9 @@ process flag))) -;; ------------------------------------------------------------ -;; -- Kludges section -- -;; ------------------------------------------------------------ +;; ------------------------------------------------------------ +;; -- Kludges section -- +;; ------------------------------------------------------------ ;; Currently (as of Emacs 20.5), the function `shell-quote-argument' ;; does not deal well with newline characters. Newline is replaced by @@ -7304,7 +7314,7 @@ ;; strange when doing zerop, we should kill the process and start ;; again. (Greg Stark) ;; * Add caching for filename completion. (Greg Stark) -;; Of course, this has issues with usability (stale cache bites) +;; Of course, this has issues with usability (stale cache bites) ;; -- <daniel@danann.net> ;; * Provide a local cache of old versions of remote files for the rsync ;; transfer method to use. (Greg Stark)
--- a/lisp/net/trampver.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/net/trampver.el Sat Dec 25 02:00:25 2004 +0000 @@ -30,7 +30,7 @@ ;; are auto-frobbed from configure.ac, so you should edit that file and run ;; "autoconf && ./configure" to change them. -(defconst tramp-version "2.0.45" +(defconst tramp-version "2.0.46" "This version of Tramp.") (defconst tramp-bug-report-address "tramp-devel@mail.freesoftware.fsf.org"
--- a/lisp/pcvs-defs.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/pcvs-defs.el Sat Dec 25 02:00:25 2004 +0000 @@ -380,6 +380,8 @@ ("+" . cvs-mode-tree) ;; mouse bindings ([mouse-2] . cvs-mode-find-file) + ([follow-link] . (lambda (pos) + (if (eq (get-char-property pos 'face) 'cvs-filename-face) t))) ([(down-mouse-3)] . cvs-menu) ;; dired-like bindings ("\C-o" . cvs-mode-display-file)
--- a/lisp/play/zone.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/play/zone.el Sat Dec 25 02:00:25 2004 +0000 @@ -33,10 +33,11 @@ ;; `zone-programs'. See `zone-call' for higher-ordered zoning. ;; WARNING: Not appropriate for Emacs sessions over modems or -;; computers as slow as mine. +;; computers as slow as mine. -;; THANKS: Christopher Mayer, Scott Flinchbaugh, Rachel Kalmar, -;; Max Froumentin. +;; THANKS: Christopher Mayer, Scott Flinchbaugh, +;; Rachel Kalmar, Max Froumentin, Juri Linkov, +;; Luigi Panzeri, John Paul Wallington. ;;; Code: @@ -140,19 +141,28 @@ (window-start))))) (put 'zone 'orig-buffer (current-buffer)) (put 'zone 'modeline-hidden-level 0) - (set-buffer outbuf) + (switch-to-buffer outbuf) (setq mode-name "Zone") (erase-buffer) + (setq buffer-undo-list t + truncate-lines t + tab-width (zone-orig tab-width) + line-spacing (zone-orig line-spacing)) (insert text) - (switch-to-buffer outbuf) - (setq buffer-undo-list t) (untabify (point-min) (point-max)) (set-window-start (selected-window) (point-min)) (set-window-point (selected-window) wp) (sit-for 0 500) (let ((pgm (elt zone-programs (random (length zone-programs)))) - (ct (and f (frame-parameter f 'cursor-type)))) - (when ct (modify-frame-parameters f '((cursor-type . (bar . 0))))) + (ct (and f (frame-parameter f 'cursor-type))) + (restore (list '(kill-buffer outbuf)))) + (when ct + (modify-frame-parameters f '((cursor-type . (bar . 0)))) + (setq restore (cons '(modify-frame-parameters + f (list (cons 'cursor-type ct))) + restore))) + ;; Make `restore' a self-disabling one-shot thunk. + (setq restore `(lambda () ,@restore (setq restore nil))) (condition-case nil (progn (message "Zoning... (%s)" pgm) @@ -166,14 +176,17 @@ (zone-call pgm) (message "Zoning...sorry")) (error + (funcall restore) (while (not (input-pending-p)) (message (format "We were zoning when we wrote %s..." pgm)) (sit-for 3) (message "...here's hoping we didn't hose your buffer!") (sit-for 3))) - (quit (ding) (message "Zoning...sorry"))) - (when ct (modify-frame-parameters f (list (cons 'cursor-type ct))))) - (kill-buffer outbuf))) + (quit + (funcall restore) + (ding) + (message "Zoning...sorry"))) + (when restore (funcall restore))))) ;;;; Zone when idle, or not. @@ -195,13 +208,11 @@ (message "I won't zone out any more")) -;;;; zone-pgm-jitter +;;;; jittering (defun zone-shift-up () (let* ((b (point)) - (e (progn - (end-of-line) - (if (looking-at "\n") (1+ (point)) (point)))) + (e (progn (forward-line 1) (point))) (s (buffer-substring b e))) (delete-region b e) (goto-char (point-max)) @@ -209,48 +220,40 @@ (defun zone-shift-down () (goto-char (point-max)) - (forward-line -1) - (beginning-of-line) (let* ((b (point)) - (e (progn - (end-of-line) - (if (looking-at "\n") (1+ (point)) (point)))) + (e (progn (forward-line -1) (point))) (s (buffer-substring b e))) (delete-region b e) (goto-char (point-min)) (insert s))) (defun zone-shift-left () - (while (not (eobp)) - (or (eolp) - (let ((c (following-char))) - (delete-char 1) - (end-of-line) - (insert c))) - (forward-line 1))) + (let (s) + (while (not (eobp)) + (unless (eolp) + (setq s (buffer-substring (point) (1+ (point)))) + (delete-char 1) + (end-of-line) + (insert s)) + (forward-char 1)))) (defun zone-shift-right () - (while (not (eobp)) - (end-of-line) - (or (bolp) - (let ((c (preceding-char))) - (delete-backward-char 1) - (beginning-of-line) - (insert c))) - (forward-line 1))) + (goto-char (point-max)) + (end-of-line) + (let (s) + (while (not (bobp)) + (unless (bolp) + (setq s (buffer-substring (1- (point)) (point))) + (delete-char -1) + (beginning-of-line) + (insert s)) + (end-of-line 0)))) (defun zone-pgm-jitter () (let ((ops [ zone-shift-left - zone-shift-left - zone-shift-left - zone-shift-left zone-shift-right zone-shift-down - zone-shift-down - zone-shift-down - zone-shift-down - zone-shift-down zone-shift-up ])) (goto-char (point-min)) @@ -260,7 +263,7 @@ (sit-for 0 10)))) -;;;; zone-pgm-whack-chars +;;;; whacking chars (defun zone-pgm-whack-chars () (let ((tbl (copy-sequence (get 'zone-pgm-whack-chars 'wc-tbl)))) @@ -280,7 +283,7 @@ (setq i (1+ i))) tbl)) -;;;; zone-pgm-dissolve +;;;; dissolving (defun zone-remove-text () (let ((working t)) @@ -305,11 +308,11 @@ (zone-pgm-jitter)) -;;;; zone-pgm-explode +;;;; exploding (defun zone-exploding-remove () (let ((i 0)) - (while (< i 20) + (while (< i 5) (save-excursion (goto-char (point-min)) (while (not (eobp)) @@ -328,7 +331,7 @@ (zone-pgm-jitter)) -;;;; zone-pgm-putz-with-case +;;;; putzing w/ case ;; Faster than `zone-pgm-putz-with-case', but not as good: all ;; instances of the same letter have the same case, which produces a @@ -377,7 +380,7 @@ (sit-for 0 2))) -;;;; zone-pgm-rotate +;;;; rotating (defun zone-line-specs () (let (ret) @@ -439,66 +442,84 @@ (zone-pgm-rotate (lambda () (1- (- (random 3)))))) -;;;; zone-pgm-drip +;;;; dripping -(defun zone-cpos (pos) +(defsubst zone-cpos (pos) (buffer-substring pos (1+ pos))) -(defun zone-fret (pos) +(defsubst zone-replace-char (count del-count char-as-string new-value) + (delete-char (or del-count (- count))) + (aset char-as-string 0 new-value) + (dotimes (i count) (insert char-as-string))) + +(defsubst zone-park/sit-for (pos seconds) + (let ((p (point))) + (goto-char pos) + (prog1 (sit-for seconds) + (goto-char p)))) + +(defun zone-fret (wbeg pos) (let* ((case-fold-search nil) (c-string (zone-cpos pos)) + (cw-ceil (ceiling (char-width (aref c-string 0)))) (hmm (cond ((string-match "[a-z]" c-string) (upcase c-string)) ((string-match "[A-Z]" c-string) (downcase c-string)) - (t " ")))) + (t (propertize " " 'display `(space :width ,cw-ceil)))))) (do ((i 0 (1+ i)) (wait 0.5 (* wait 0.8))) ((= i 20)) (goto-char pos) (delete-char 1) (insert (if (= 0 (% i 2)) hmm c-string)) - (sit-for wait)) + (zone-park/sit-for wbeg wait)) (delete-char -1) (insert c-string))) (defun zone-fill-out-screen (width height) - (save-excursion - (goto-char (point-min)) + (let ((start (window-start)) + (line (make-string width 32))) + (goto-char start) ;; fill out rectangular ws block - (while (not (eobp)) - (end-of-line) - (let ((cc (current-column))) - (if (< cc width) - (insert (make-string (- width cc) 32)) - (delete-char (- width cc)))) - (unless (eobp) - (forward-char 1))) + (while (progn (end-of-line) + (let ((cc (current-column))) + (if (< cc width) + (insert (substring line cc)) + (delete-char (- width cc))) + (cond ((eobp) (insert "\n") nil) + (t (forward-char 1) t))))) ;; pad ws past bottom of screen (let ((nl (- height (count-lines (point-min) (point))))) (when (> nl 0) - (let ((line (concat (make-string (1- width) ? ) "\n"))) - (do ((i 0 (1+ i))) - ((= i nl)) - (insert line))))))) + (setq line (concat line "\n")) + (do ((i 0 (1+ i))) + ((= i nl)) + (insert line)))) + (goto-char start) + (recenter 0) + (sit-for 0))) -(defun zone-fall-through-ws (c col wend) - (let ((fall-p nil) ; todo: move outward - (wait 0.15) - (o (point)) ; for terminals w/o cursor hiding - (p (point))) - (while (progn - (forward-line 1) - (move-to-column col) - (looking-at " ")) - (setq fall-p t) - (delete-char 1) - (insert (if (< (point) wend) c " ")) - (save-excursion - (goto-char p) - (delete-char 1) - (insert " ") - (goto-char o) - (sit-for (setq wait (* wait 0.8)))) - (setq p (1- (point)))) +(defun zone-fall-through-ws (c wbeg wend) + (let* ((cw-ceil (ceiling (char-width (aref c 0)))) + (spaces (make-string cw-ceil 32)) + (col (current-column)) + (wait 0.15) + newpos fall-p) + (while (when (save-excursion + (next-line 1) + (and (= col (current-column)) + (setq newpos (point)) + (string= spaces (buffer-substring-no-properties + newpos (+ newpos cw-ceil))) + (setq newpos (+ newpos (1- cw-ceil))))) + (setq fall-p t) + (delete-char 1) + (insert spaces) + (goto-char newpos) + (when (< (point) wend) + (delete-char cw-ceil) + (insert c) + (forward-char -1) + (zone-park/sit-for wbeg (setq wait (* wait 0.8)))))) fall-p)) (defun zone-pgm-drip (&optional fret-p pancake-p) @@ -506,41 +527,35 @@ (wh (window-height)) (mc 0) ; miss count (total (* ww wh)) - (fall-p nil)) + (fall-p nil) + wbeg wend c) (zone-fill-out-screen ww wh) + (setq wbeg (window-start) + wend (window-end)) (catch 'done (while (not (input-pending-p)) - (let ((wbeg (window-start)) - (wend (window-end))) - (setq mc 0) - ;; select non-ws character, but don't miss too much - (goto-char (+ wbeg (random (- wend wbeg)))) - (while (looking-at "[ \n\f]") - (if (= total (setq mc (1+ mc))) - (throw 'done 'sel) - (goto-char (+ wbeg (random (- wend wbeg)))))) - ;; character animation sequence - (let ((p (point))) - (when fret-p (zone-fret p)) - (goto-char p) - (setq fall-p (zone-fall-through-ws - (zone-cpos p) (current-column) wend)))) + (setq mc 0 wend (window-end)) + ;; select non-ws character, but don't miss too much + (goto-char (+ wbeg (random (- wend wbeg)))) + (while (looking-at "[ \n\f]") + (if (= total (setq mc (1+ mc))) + (throw 'done 'sel) + (goto-char (+ wbeg (random (- wend wbeg)))))) + ;; character animation sequence + (let ((p (point))) + (when fret-p (zone-fret wbeg p)) + (goto-char p) + (setq c (zone-cpos p) + fall-p (zone-fall-through-ws c wbeg wend))) ;; assuming current-column has not changed... (when (and pancake-p fall-p (< (count-lines (point-min) (point)) wh)) - (previous-line 1) - (forward-char 1) - (sit-for 0.137) - (delete-char -1) - (insert "@") - (sit-for 0.137) - (delete-char -1) - (insert "*") - (sit-for 0.137) - (delete-char -1) - (insert "_")))))) + (let ((cw (ceiling (char-width (aref c 0))))) + (zone-replace-char cw 1 c ?@) (zone-park/sit-for wbeg 0.137) + (zone-replace-char cw nil c ?*) (zone-park/sit-for wbeg 0.137) + (zone-replace-char cw nil c ?_))))))) (defun zone-pgm-drip-fretfully () (zone-pgm-drip t)) @@ -552,7 +567,7 @@ (zone-pgm-drip t t)) -;;;; zone-pgm-paragraph-spaz +;;;; paragraph spazzing (for textish modes) (defun zone-pgm-paragraph-spaz () (if (memq (zone-orig major-mode) @@ -633,30 +648,29 @@ (rtc (- (frame-width) 11)) (min (window-start)) (max (1- (window-end))) - c col) + s c col) (delete-region max (point-max)) - (while (progn (goto-char (+ min (random max))) - (and (sit-for 0.005) + (while (and (progn (goto-char min) (sit-for 0.05)) + (progn (goto-char (+ min (random max))) (or (progn (skip-chars-forward " @\n" max) (not (= max (point)))) (unless (or (= 0 (skip-chars-backward " @\n" min)) (= min (point))) (forward-char -1) t)))) - (setq c (char-after)) - (unless (or (not c) (= ?\n c)) - (forward-char 1) - (insert-and-inherit ; keep colors - (cond ((or (> top (point)) - (< bot (point)) - (or (> 11 (setq col (current-column))) - (< rtc col))) - 32) - ((and (<= ?a c) (>= ?z c)) (+ c (- ?A ?a))) - ((and (<= ?A c) (>= ?Z c)) ?*) - (t ?@))) - (forward-char -1) - (delete-char -1))) + (unless (or (eolp) (eobp)) + (setq s (zone-cpos (point)) + c (aref s 0)) + (zone-replace-char + (char-width c) + 1 s (cond ((or (> top (point)) + (< bot (point)) + (or (> 11 (setq col (current-column))) + (< rtc col))) + 32) + ((and (<= ?a c) (>= ?z c)) (+ c (- ?A ?a))) + ((and (<= ?A c) (>= ?Z c)) ?*) + (t ?@))))) (sit-for 3) (setq col nil) (goto-char bot) @@ -666,8 +680,13 @@ (setq col (cons (buffer-substring (point) c) col)) (end-of-line 0) (forward-char -10)) - (let ((life-patterns (vector (cons (make-string (length (car col)) 32) - col)))) + (let ((life-patterns (vector + (if (and col (search-forward "@" max t)) + (cons (make-string (length (car col)) 32) col) + (list (mapconcat 'identity + (make-list (/ (- rtc 11) 15) + (make-string 5 ?@)) + (make-string 10 32))))))) (life (or zone-pgm-random-life-wait (random 4))) (kill-buffer nil))))
--- a/lisp/progmodes/compile.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/progmodes/compile.el Sat Dec 25 02:00:25 2004 +0000 @@ -1044,6 +1044,7 @@ (defvar compilation-minor-mode-map (let ((map (make-sparse-keymap))) (define-key map [mouse-2] 'compile-goto-error) + (define-key map [follow-link] 'mouse-face) (define-key map "\C-c\C-c" 'compile-goto-error) (define-key map "\C-m" 'compile-goto-error) (define-key map "\C-c\C-k" 'kill-compilation) @@ -1073,6 +1074,7 @@ (defvar compilation-button-map (let ((map (make-sparse-keymap))) (define-key map [mouse-2] 'compile-goto-error) + (define-key map [follow-link] 'mouse-face) (define-key map "\C-m" 'compile-goto-error) map) "Keymap for compilation-message buttons.") @@ -1084,6 +1086,7 @@ ;; because that introduces a menu bar item we don't want. ;; That confuses C-down-mouse-3. (define-key map [mouse-2] 'compile-goto-error) + (define-key map [follow-link] 'mouse-face) (define-key map "\C-c\C-c" 'compile-goto-error) (define-key map "\C-m" 'compile-goto-error) (define-key map "\C-c\C-k" 'kill-compilation)
--- a/lisp/progmodes/executable.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/progmodes/executable.el Sat Dec 25 02:00:25 2004 +0000 @@ -199,20 +199,20 @@ (file-modes buffer-file-name))))))) +;;;###autoload (defun executable-interpret (command) "Run script with user-specified args, and collect output in a buffer. -While script runs asynchronously, you can use the \\[next-error] command -to find the next error." +While script runs asynchronously, you can use the \\[next-error] +command to find the next error. The buffer is also in `comint-mode' and +`compilation-shell-minor-mode', so that you can answer any prompts." (interactive (list (read-string "Run script: " (or executable-command buffer-file-name)))) (require 'compile) (save-some-buffers (not compilation-ask-about-save)) - (make-local-variable 'executable-command) - (compile-internal (setq executable-command command) - "No more errors." "Interpretation" - ;; Give it a simpler regexp to match. - nil executable-error-regexp-alist)) + (set (make-local-variable 'executable-command) command) + (let ((compilation-error-regexp-alist executable-error-regexp-alist)) + (compilation-start command t (lambda (x) "*interpretation*"))))
--- a/lisp/progmodes/grep.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/progmodes/grep.el Sat Dec 25 02:00:25 2004 +0000 @@ -275,6 +275,9 @@ (defvar grep-error-face compilation-error-face "Face name to use for grep error messages.") +(defvar grep-match-face 'match + "Face name to use for grep matches.") + (defvar grep-mode-font-lock-keywords '(;; Command output lines. ("^\\([A-Za-z_0-9/\.+-]+\\)[ \t]*:" 1 font-lock-function-name-face) @@ -291,7 +294,7 @@ (2 compilation-line-face)) ;; Highlight grep matches and delete markers ("\\(\033\\[01;41m\\)\\(.*?\\)\\(\033\\[00m\\)" - (2 compilation-column-face) + (2 grep-match-face) ((lambda (p)) (progn ;; Delete markers with `replace-match' because it updates
--- a/lisp/progmodes/hideshow.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/progmodes/hideshow.el Sat Dec 25 02:00:25 2004 +0000 @@ -5,7 +5,7 @@ ;; Author: Thien-Thi Nguyen <ttn@gnu.org> ;; Dan Nicolaescu <dann@ics.uci.edu> ;; Keywords: C C++ java lisp tools editing comments blocks hiding outlines -;; Maintainer-Version: 5.31 +;; Maintainer-Version: 5.39.2.8 ;; Time-of-Day-Author-Most-Likely-to-be-Recalcitrant: early morning ;; This file is part of GNU Emacs. @@ -58,7 +58,7 @@ ;; ;; (load-library "hideshow") ;; (add-hook 'X-mode-hook ; other modes similarly -;; '(lambda () (hs-minor-mode 1))) +;; (lambda () (hs-minor-mode 1))) ;; ;; where X = {emacs-lisp,c,c++,perl,...}. You can also manually toggle ;; hideshow minor mode by typing `M-x hs-minor-mode'. After hideshow is @@ -133,10 +133,7 @@ ;; variable `hs-special-modes-alist'. Packages that use hideshow should ;; do something like: ;; -;; (let ((my-mode-hs-info '(my-mode "{{" "}}" ...))) -;; (if (not (member my-mode-hs-info hs-special-modes-alist)) -;; (setq hs-special-modes-alist -;; (cons my-mode-hs-info hs-special-modes-alist)))) +;; (add-to-list 'hs-special-modes-alist '(my-mode "{{" "}}" ...)) ;; ;; If you have an entry that works particularly well, consider ;; submitting it for inclusion in hideshow.el. See docstring for @@ -180,9 +177,9 @@ ;; In the case of `vc-diff', here is a less invasive workaround: ;; ;; (add-hook 'vc-before-checkin-hook -;; '(lambda () -;; (goto-char (point-min)) -;; (hs-show-block))) +;; (lambda () +;; (goto-char (point-min)) +;; (hs-show-block))) ;; ;; Unfortunately, these workarounds do not restore hideshow state. ;; If someone figures out a better way, please let me know. @@ -223,6 +220,7 @@ ;;; Code: (require 'easymenu) +(eval-when-compile (require 'cl)) ;;--------------------------------------------------------------------------- ;; user-configurable variables @@ -265,8 +263,7 @@ '((c-mode "{" "}" "/[*/]" nil hs-c-like-adjust-block-beginning) (c++-mode "{" "}" "/[*/]" nil hs-c-like-adjust-block-beginning) (bibtex-mode ("^@\\S(*\\(\\s(\\)" 1)) - (java-mode "{" "}" "/[*/]" nil hs-c-like-adjust-block-beginning) - ) + (java-mode "{" "}" "/[*/]" nil hs-c-like-adjust-block-beginning)) "*Alist for initializing the hideshow variables for different modes. Each element has the form (MODE START END COMMENT-START FORWARD-SEXP-FUNC ADJUST-BEG-FUNC). @@ -378,28 +375,6 @@ ;;--------------------------------------------------------------------------- ;; system dependency -; ;; xemacs compatibility -; (when (string-match "xemacs\\|lucid" emacs-version) -; ;; use pre-packaged compatiblity layer -; (require 'overlay)) -; -; ;; xemacs and emacs-19 compatibility -; (when (or (not (fboundp 'add-to-invisibility-spec)) -; (not (fboundp 'remove-from-invisibility-spec))) -; ;; `buffer-invisibility-spec' mutators snarfed from Emacs 20.3 lisp/subr.el -; (defun add-to-invisibility-spec (arg) -; (cond -; ((or (null buffer-invisibility-spec) (eq buffer-invisibility-spec t)) -; (setq buffer-invisibility-spec (list arg))) -; (t -; (setq buffer-invisibility-spec -; (cons arg buffer-invisibility-spec))))) -; (defun remove-from-invisibility-spec (arg) -; (when buffer-invisibility-spec -; (setq buffer-invisibility-spec -; (delete arg buffer-invisibility-spec))))) - -;; hs-match-data (defalias 'hs-match-data 'match-data) ;;--------------------------------------------------------------------------- @@ -409,12 +384,9 @@ "Delete hideshow overlays in region defined by FROM and TO." (when (< to from) (setq from (prog1 to (setq to from)))) - (let ((ovs (overlays-in from to))) - (while ovs - (let ((ov (car ovs))) - (when (overlay-get ov 'hs) - (delete-overlay ov))) - (setq ovs (cdr ovs))))) + (dolist (ov (overlays-in from to)) + (when (overlay-get ov 'hs) + (delete-overlay ov)))) (defun hs-isearch-show (ov) "Delete overlay OV, and set `hs-headline' to nil. @@ -433,16 +405,16 @@ This function is meant to be used as the `isearch-open-invisible-temporary' property of an overlay." (setq hs-headline - (if hide-p - nil - (or hs-headline - (let ((start (overlay-start ov))) - (buffer-substring - (save-excursion (goto-char start) - (beginning-of-line) - (skip-chars-forward " \t") - (point)) - start))))) + (if hide-p + nil + (or hs-headline + (let ((start (overlay-start ov))) + (buffer-substring + (save-excursion (goto-char start) + (beginning-of-line) + (skip-chars-forward " \t") + (point)) + start))))) (force-mode-line-update) (overlay-put ov 'invisible (and hide-p 'hs))) @@ -464,10 +436,10 @@ ;; deprecated backward compatibility -- `block'<=>`code' (and (eq 'block hs-isearch-open) (eq 'code flag))) - (overlay-put overlay 'isearch-open-invisible 'hs-isearch-show) - (overlay-put overlay - 'isearch-open-invisible-temporary - 'hs-isearch-show-temporary)) + (overlay-put overlay 'isearch-open-invisible 'hs-isearch-show) + (overlay-put overlay + 'isearch-open-invisible-temporary + 'hs-isearch-show-temporary)) overlay)))) (defun hs-forward-sexp (match-data arg) @@ -523,10 +495,10 @@ (defun hs-safety-is-job-n () "Warn if `buffer-invisibility-spec' does not contain symbol `hs'." - (unless (and (listp buffer-invisibility-spec) - (assq 'hs buffer-invisibility-spec)) - (message "Warning: `buffer-invisibility-spec' does not contain hs!!") - (sit-for 2))) + (unless (and (listp buffer-invisibility-spec) + (assq 'hs buffer-invisibility-spec)) + (message "Warning: `buffer-invisibility-spec' does not contain hs!!") + (sit-for 2))) (defun hs-inside-comment-p () "Return non-nil if point is inside a comment, otherwise nil. @@ -543,10 +515,15 @@ (let ((q (point))) (when (or (looking-at hs-c-start-regexp) (re-search-backward hs-c-start-regexp (point-min) t)) + ;; first get to the beginning of this comment... + (while (and (not (bobp)) + (= (point) (progn (forward-comment -1) (point)))) + (forward-char -1)) + ;; ...then extend backwards (forward-comment (- (buffer-size))) (skip-chars-forward " \t\n\f") (let ((p (point)) - (not-hidable nil)) + (hidable t)) (beginning-of-line) (unless (looking-at (concat "[ \t]*" hs-c-start-regexp)) ;; we are in this situation: (example) @@ -565,19 +542,19 @@ (while (and (< (point) q) (> (point) p) (not (looking-at hs-c-start-regexp))) - (setq p (point));; use this to avoid an infinite cycle + (setq p (point)) ;; use this to avoid an infinite cycle (forward-comment 1) (skip-chars-forward " \t\n\f")) (when (or (not (looking-at hs-c-start-regexp)) (> (point) q)) ;; we cannot hide this comment block - (setq not-hidable t))) + (setq hidable nil))) ;; goto the end of the comment (forward-comment (buffer-size)) (skip-chars-backward " \t\n\f") (end-of-line) (when (>= (point) q) - (list (if not-hidable nil p) (point)))))))) + (list (and hidable p) (point)))))))) (defun hs-grok-mode-type () "Set up hideshow variables for new buffers. @@ -645,7 +622,7 @@ (hs-hide-level-recursive (1- arg) minp maxp) (goto-char (match-beginning hs-block-start-mdata-select)) (hs-hide-block-at-point t))) - (hs-safety-is-job-n) + (hs-safety-is-job-n) (goto-char maxp)) (defmacro hs-life-goes-on (&rest body) @@ -675,8 +652,8 @@ (let ((overlays (overlays-at (point))) (found nil)) (while (and (not found) (overlayp (car overlays))) - (setq found (overlay-get (car overlays) 'hs) - overlays (cdr overlays))) + (setq found (overlay-get (car overlays) 'hs) + overlays (cdr overlays))) found))) (defun hs-c-like-adjust-block-beginning (initial) @@ -724,7 +701,7 @@ (funcall hs-hide-all-non-comment-function) (hs-hide-block-at-point t))) ;; found a comment, probably - (let ((c-reg (hs-inside-comment-p))) ; blech! + (let ((c-reg (hs-inside-comment-p))) ; blech! (when (and c-reg (car c-reg)) (if (> (count-lines (car c-reg) (nth 1 c-reg)) 1) (hs-hide-block-at-point t c-reg) @@ -772,18 +749,15 @@ (or ;; first see if we have something at the end of the line (catch 'eol-begins-hidden-region-p - (let ((here (point)) - (ovs (save-excursion (end-of-line) (overlays-at (point))))) - (while ovs - (let ((ov (car ovs))) - (when (overlay-get ov 'hs) - (goto-char - (cond (end (overlay-end ov)) - ((eq 'comment (overlay-get ov 'hs)) here) - (t (+ (overlay-start ov) (overlay-get ov 'hs-ofs))))) - (delete-overlay ov) - (throw 'eol-begins-hidden-region-p t))) - (setq ovs (cdr ovs))) + (let ((here (point))) + (dolist (ov (save-excursion (end-of-line) (overlays-at (point)))) + (when (overlay-get ov 'hs) + (goto-char + (cond (end (overlay-end ov)) + ((eq 'comment (overlay-get ov 'hs)) here) + (t (+ (overlay-start ov) (overlay-get ov 'hs-ofs))))) + (delete-overlay ov) + (throw 'eol-begins-hidden-region-p t))) nil)) ;; not immediately obvious, look for a suitable block (let ((c-reg (hs-inside-comment-p)) @@ -870,9 +844,9 @@ (interactive "P") (setq hs-headline nil - hs-minor-mode (if (null arg) - (not hs-minor-mode) - (> (prefix-numeric-value arg) 0))) + hs-minor-mode (if (null arg) + (not hs-minor-mode) + (> (prefix-numeric-value arg) 0))) (if hs-minor-mode (progn (hs-grok-mode-type) @@ -912,27 +886,19 @@ ))))) ;; some housekeeping -(or (assq 'hs-minor-mode minor-mode-map-alist) - (setq minor-mode-map-alist - (cons (cons 'hs-minor-mode hs-minor-mode-map) - minor-mode-map-alist))) -(or (assq 'hs-minor-mode minor-mode-alist) - (setq minor-mode-alist (append minor-mode-alist - (list '(hs-minor-mode " hs"))))) +(add-to-list 'minor-mode-map-alist (cons 'hs-minor-mode hs-minor-mode-map)) +(add-to-list 'minor-mode-alist '(hs-minor-mode " hs") t) ;; make some variables permanently buffer-local -(let ((vars '(hs-minor-mode - hs-c-start-regexp - hs-block-start-regexp - hs-block-start-mdata-select - hs-block-end-regexp - hs-forward-sexp-func - hs-adjust-block-beginning))) - (while vars - (let ((var (car vars))) - (make-variable-buffer-local var) - (put var 'permanent-local t)) - (setq vars (cdr vars)))) +(dolist (var '(hs-minor-mode + hs-c-start-regexp + hs-block-start-regexp + hs-block-start-mdata-select + hs-block-end-regexp + hs-forward-sexp-func + hs-adjust-block-beginning)) + (make-variable-buffer-local var) + (put var 'permanent-local t)) ;;--------------------------------------------------------------------------- ;; that's it
--- a/lisp/progmodes/idlwave.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/progmodes/idlwave.el Sat Dec 25 02:00:25 2004 +0000 @@ -2571,7 +2571,9 @@ (let ((save-point (point))) (when (re-search-forward ".*&" lim t) (goto-char (match-end 0)) - (if (idlwave-quoted) (goto-char save-point))) + (if (idlwave-quoted) + (goto-char save-point) + (if (eq (char-after (- (point) 2)) ?&) (goto-char save-point)))) (point))) (defun idlwave-skip-label-or-case ()
--- a/lisp/replace.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/replace.el Sat Dec 25 02:00:25 2004 +0000 @@ -735,16 +735,17 @@ Compatibility function for \\[next-error] invocations." (interactive "p") ;; we need to run occur-find-match from within the Occur buffer - (with-current-buffer + (with-current-buffer (if (next-error-buffer-p (current-buffer)) (current-buffer) (next-error-find-buffer nil nil (lambda() (eq major-mode 'occur-mode)))) - - (when reset - (goto-char (point-min))) + + (goto-char (cond (reset (point-min)) + ((< argp 0) (line-beginning-position)) + ((line-end-position)))) (occur-find-match - (abs (prefix-numeric-value argp)) - (if (> 0 (prefix-numeric-value argp)) + (abs argp) + (if (> 0 argp) #'previous-single-property-change #'next-single-property-change) "No more matches") @@ -752,6 +753,20 @@ (set-window-point (get-buffer-window (current-buffer)) (point)) (occur-mode-goto-occurrence))) +(defface match + '((((class color) (min-colors 88) (background light)) + :background "Tan") + (((class color) (min-colors 88) (background dark)) + :background "RoyalBlue4") + (((class color) (min-colors 8)) + :background "blue" :foreground "white") + (((type tty) (class mono)) + :inverse-video t) + (t :background "gray")) + "Face used to highlight matches permanently." + :group 'matching + :version "21.4") + (defcustom list-matching-lines-default-context-lines 0 "*Default number of context lines included around `list-matching-lines' matches. A negative number means to include that many lines before the match. @@ -761,7 +776,7 @@ (defalias 'list-matching-lines 'occur) -(defcustom list-matching-lines-face 'bold +(defcustom list-matching-lines-face 'match "*Face used by \\[list-matching-lines] to show the text that matches. If the value is nil, don't highlight the matching portions specially." :type 'face @@ -776,18 +791,22 @@ (defun occur-accumulate-lines (count &optional keep-props) (save-excursion (let ((forwardp (> count 0)) - (result nil)) + result beg end) (while (not (or (zerop count) (if forwardp (eobp) (bobp)))) (setq count (+ count (if forwardp -1 1))) + (setq beg (line-beginning-position) + end (line-end-position)) + (if (and keep-props (boundp 'jit-lock-mode) jit-lock-mode + (text-property-not-all beg end 'fontified t)) + (jit-lock-fontify-now beg end)) (push (funcall (if keep-props #'buffer-substring #'buffer-substring-no-properties) - (line-beginning-position) - (line-end-position)) + beg end) result) (forward-line (if forwardp 1 -1))) (nreverse result)))) @@ -982,14 +1001,17 @@ (when (setq endpt (re-search-forward regexp nil t)) (setq matches (1+ matches)) ;; increment match count (setq matchbeg (match-beginning 0)) - (setq begpt (save-excursion - (goto-char matchbeg) - (line-beginning-position))) (setq lines (+ lines (1- (count-lines origpt endpt)))) + (save-excursion + (goto-char matchbeg) + (setq begpt (line-beginning-position) + endpt (line-end-position))) (setq marker (make-marker)) (set-marker marker matchbeg) - (setq curstring (buffer-substring begpt - (line-end-position))) + (if (and keep-props (boundp 'jit-lock-mode) jit-lock-mode + (text-property-not-all begpt endpt 'fontified t)) + (jit-lock-fontify-now begpt endpt)) + (setq curstring (buffer-substring begpt endpt)) ;; Depropertize the string, and maybe ;; highlight the matches (let ((len (length curstring)) @@ -998,17 +1020,15 @@ (set-text-properties 0 len nil curstring)) (while (and (< start len) (string-match regexp curstring start)) - (add-text-properties (match-beginning 0) - (match-end 0) - (append - `(occur-match t) - (when match-face - ;; Use `face' rather than - ;; `font-lock-face' here - ;; so as to override faces - ;; copied from the buffer. - `(face ,match-face))) - curstring) + (add-text-properties + (match-beginning 0) (match-end 0) + (append + `(occur-match t) + (when match-face + ;; Use `face' rather than `font-lock-face' here + ;; so as to override faces copied from the buffer. + `(face ,match-face))) + curstring) (setq start (match-end 0)))) ;; Generate the string to insert for this match (let* ((out-line @@ -1019,7 +1039,10 @@ (when prefix-face `(font-lock-face prefix-face)) '(occur-prefix t))) - curstring + ;; We don't put `mouse-face' on the newline, + ;; because that loses. And don't put it + ;; on context lines to reduce flicker. + (propertize curstring 'mouse-face 'highlight) "\n")) (data (if (= nlines 0) @@ -1043,10 +1066,7 @@ (insert "-------\n")) (add-text-properties beg end - `(occur-target ,marker help-echo "mouse-2: go to this occurrence")) - ;; We don't put `mouse-face' on the newline, - ;; because that loses. - (add-text-properties beg (1- end) '(mouse-face highlight))))) + `(occur-target ,marker help-echo "mouse-2: go to this occurrence"))))) (goto-char endpt)) (if endpt (progn @@ -1283,6 +1303,7 @@ (isearch-string isearch-string) (isearch-regexp isearch-regexp) + (isearch-case-fold-search isearch-case-fold-search) (message (if query-flag (substitute-command-keys @@ -1315,9 +1336,11 @@ (if regexp-flag from-string (regexp-quote from-string)) "\\b"))) - (if (eq query-replace-highlight 'isearch) - (setq isearch-string search-string - isearch-regexp regexp-flag)) + (when query-replace-lazy-highlight + (setq isearch-string search-string + isearch-regexp (or delimited-flag regexp-flag) + isearch-case-fold-search case-fold-search + isearch-lazy-highlight-last-string nil)) (push-mark) (undo-boundary) @@ -1535,13 +1558,15 @@ (append (listify-key-sequence key) unread-command-events)) (setq done t))) - (when (eq query-replace-highlight 'isearch) - ;; Force isearch rehighlighting + (when query-replace-lazy-highlight + ;; Restore isearch data for lazy highlighting + ;; in case of isearching during recursive edit + (setq isearch-string search-string + isearch-regexp (or delimited-flag regexp-flag) + isearch-case-fold-search case-fold-search) + ;; Force lazy rehighlighting only after replacements (if (not (memq def '(skip backup))) - (setq isearch-lazy-highlight-last-string nil)) - ;; Restore isearch data in case of isearching during edit - (setq isearch-string search-string - isearch-regexp regexp-flag))) + (setq isearch-lazy-highlight-last-string nil)))) ;; Record previous position for ^ when we move on. ;; Change markers to numbers in the match data ;; since lots of markers slow down editing. @@ -1576,38 +1601,45 @@ (if (= replace-count 1) "" "s"))) (and keep-going stack))) -(defcustom query-replace-highlight - (if (and search-highlight isearch-lazy-highlight) 'isearch t) - "*Non-nil means to highlight words during query replacement. -If `isearch', use isearch highlighting for query replacement." - :type '(choice (const :tag "Highlight" t) - (const :tag "No highlighting" nil) - (const :tag "Isearch highlighting" 'isearch)) +(defcustom query-replace-highlight t + "*Non-nil means to highlight matches during query replacement." + :type 'boolean :group 'matching) +(defcustom query-replace-lazy-highlight t + "*Controls the lazy-highlighting during query replacements. +When non-nil, all text in the buffer matching the current match +is highlighted lazily using isearch lazy highlighting (see +`isearch-lazy-highlight-initial-delay' and +`isearch-lazy-highlight-interval')." + :type 'boolean + :group 'matching + :version "21.4") + +(defface query-replace + '((t (:inherit isearch))) + "Face for highlighting query replacement matches." + :group 'matching + :version "21.4") + (defvar replace-overlay nil) -(defun replace-dehighlight () - (cond ((eq query-replace-highlight 'isearch) - (isearch-dehighlight t) - (isearch-lazy-highlight-cleanup isearch-lazy-highlight-cleanup) - (setq isearch-lazy-highlight-last-string nil)) - (query-replace-highlight - (when replace-overlay - (delete-overlay replace-overlay) - (setq replace-overlay nil))))) +(defun replace-highlight (beg end) + (if query-replace-highlight + (if replace-overlay + (move-overlay replace-overlay beg end (current-buffer)) + (setq replace-overlay (make-overlay beg end)) + (overlay-put replace-overlay 'priority 1) ;higher than lazy overlays + (overlay-put replace-overlay 'face 'query-replace))) + (if query-replace-lazy-highlight + (isearch-lazy-highlight-new-loop))) -(defun replace-highlight (start end) - (cond ((eq query-replace-highlight 'isearch) - (isearch-highlight start end) - (isearch-lazy-highlight-new-loop)) - (query-replace-highlight - (if replace-overlay - (move-overlay replace-overlay start end (current-buffer)) - (setq replace-overlay (make-overlay start end)) - (overlay-put replace-overlay 'face - (if (facep 'query-replace) - 'query-replace 'region)))))) +(defun replace-dehighlight () + (when replace-overlay + (delete-overlay replace-overlay)) + (when query-replace-lazy-highlight + (isearch-lazy-highlight-cleanup isearch-lazy-highlight-cleanup) + (setq isearch-lazy-highlight-last-string nil))) ;; arch-tag: 16b4cd61-fd40-497b-b86f-b667c4cf88e4 ;;; replace.el ends here
--- a/lisp/simple.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/simple.el Sat Dec 25 02:00:25 2004 +0000 @@ -645,10 +645,6 @@ (skip-chars-forward " \t") (constrain-to-field nil orig-pos t))))) -(defvar inhibit-mark-movement nil - "If non-nil, movement commands, such as \\[beginning-of-buffer], \ -do not set the mark.") - (defun beginning-of-buffer (&optional arg) "Move point to the beginning of the buffer; leave mark at previous position. With \\[universal-argument] prefix, do not set mark at previous position. @@ -660,8 +656,7 @@ Don't use this command in Lisp programs! \(goto-char (point-min)) is faster and avoids clobbering the mark." (interactive "P") - (or inhibit-mark-movement - (consp arg) + (or (consp arg) (and transient-mark-mode mark-active) (push-mark)) (let ((size (- (point-max) (point-min)))) @@ -686,8 +681,7 @@ Don't use this command in Lisp programs! \(goto-char (point-max)) is faster and avoids clobbering the mark." (interactive "P") - (or inhibit-mark-movement - (consp arg) + (or (consp arg) (and transient-mark-mode mark-active) (push-mark)) (let ((size (- (point-max) (point-min)))) @@ -1490,6 +1484,17 @@ (t '(0 . 0))) '(0 . 0))) + +;; When the first undo batch in an undo list is longer than undo-outer-limit, +;; this function gets called to ask the user what to do. +;; Garbage collection is inhibited around the call, +;; so it had better not do a lot of consing. +(setq undo-outer-limit-function 'undo-outer-limit-truncate) +(defun undo-outer-limit-truncate (size) + (if (yes-or-no-p (format "Buffer %s undo info is %d bytes long; discard it? " + (buffer-name) size)) + (progn (setq buffer-undo-list nil) t) + nil)) (defvar shell-command-history nil "History list for some commands that read shell commands.")
--- a/lisp/textmodes/ispell.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/textmodes/ispell.el Sat Dec 25 02:00:25 2004 +0000 @@ -1975,7 +1975,7 @@ (sit-for 5) (kill-buffer "*Ispell Help*")) (unwind-protect - (progn + (let ((resize-mini-windows 'grow-only)) (select-window (minibuffer-window)) (erase-buffer) (message nil)
--- a/lisp/tooltip.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/tooltip.el Sat Dec 25 02:00:25 2004 +0000 @@ -1,6 +1,7 @@ ;;; tooltip.el --- show tooltip windows -;; Copyright (C) 1997, 1999, 2000, 2001, 2004 Free Software Foundation, Inc. +;; Copyright (C) 1997, 1999, 2000, 2001, 2002, 2003, 2004 +;; Free Software Foundation, Inc. ;; Author: Gerd Moellmann <gerd@acm.org> ;; Keywords: help c mouse tools @@ -476,7 +477,25 @@ (defun tooltip-show-help-function (msg) "Function installed as `show-help-function'. MSG is either a help string to display, or nil to cancel the display." - (let ((previous-help tooltip-help-message)) + (let ((previous-help tooltip-help-message) + mp pos) + (if (and mouse-1-click-follows-link + (stringp msg) + (save-match-data + (string-match "^mouse-2" msg)) + (setq mp (mouse-pixel-position)) + (consp (setq pos (cdr mp))) + (setq pos (posn-at-x-y (car pos) (cdr pos) (car mp))) + (windowp (posn-window pos))) + (with-current-buffer (window-buffer (posn-window pos)) + (if (mouse-on-link-p (posn-point pos)) + (setq msg (concat + (cond + ((eq mouse-1-click-follows-link 'double) "double-") + ((and (integerp mouse-1-click-follows-link) + (< mouse-1-click-follows-link 0)) "Long ") + (t "")) + "mouse-1" (substring msg 7)))))) (setq tooltip-help-message msg) (cond ((null msg) ;; Cancel display. This also cancels a delayed tip, if
--- a/lisp/vc.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/vc.el Sat Dec 25 02:00:25 2004 +0000 @@ -2836,7 +2836,7 @@ (pop-to-buffer (set-buffer (get-buffer-create "*vc*"))) (erase-buffer) - (insert-file tempfile) + (insert-file-contents tempfile) "failed")) (setq default-directory (file-name-directory changelog)) (delete-file tempfile)))))
--- a/lisp/wid-edit.el Tue Dec 14 09:27:49 2004 +0000 +++ b/lisp/wid-edit.el Sat Dec 25 02:00:25 2004 +0000 @@ -327,6 +327,7 @@ (let ((keymap (widget-get widget :keymap)) (face (or (widget-get widget :value-face) 'widget-field-face)) (help-echo (widget-get widget :help-echo)) + (follow-link (widget-get widget :follow-link)) (rear-sticky (or (not widget-field-add-space) (widget-get widget :size)))) (if (functionp help-echo) @@ -345,6 +346,7 @@ ;; works in the field when, say, Custom uses `suppress-keymap'. (overlay-put overlay 'local-map keymap) (overlay-put overlay 'face face) + (overlay-put overlay 'follow-link follow-link) (overlay-put overlay 'help-echo help-echo)) (setq to (1- to)) (setq rear-sticky t)) @@ -354,6 +356,7 @@ (overlay-put overlay 'field widget) (overlay-put overlay 'local-map keymap) (overlay-put overlay 'face face) + (overlay-put overlay 'follow-link follow-link) (overlay-put overlay 'help-echo help-echo))) (widget-specify-secret widget)) @@ -378,6 +381,7 @@ (defun widget-specify-button (widget from to) "Specify button for WIDGET between FROM and TO." (let ((overlay (make-overlay from to nil t nil)) + (follow-link (widget-get widget :follow-link)) (help-echo (widget-get widget :help-echo))) (widget-put widget :button-overlay overlay) (if (functionp help-echo) @@ -389,6 +393,7 @@ (unless (widget-get widget :suppress-face) (overlay-put overlay 'face (widget-apply widget :button-face-get))) (overlay-put overlay 'pointer 'hand) + (overlay-put overlay 'follow-link follow-link) (overlay-put overlay 'help-echo help-echo))) (defun widget-mouse-help (window overlay point) @@ -1705,6 +1710,7 @@ "An embedded link." :button-prefix 'widget-link-prefix :button-suffix 'widget-link-suffix + :follow-link "\C-m" :help-echo "Follow the link." :format "%[%t%]")
--- a/lispref/ChangeLog Tue Dec 14 09:27:49 2004 +0000 +++ b/lispref/ChangeLog Sat Dec 25 02:00:25 2004 +0000 @@ -1,3 +1,7 @@ +2004-12-21 Richard M. Stallman <rms@gnu.org> + + * commands.texi (Event Input Misc): Add while-no-input. + 2004-12-11 Richard M. Stallman <rms@gnu.org> * display.texi (Line Height): Rewrite text for clarity.
--- a/lispref/commands.texi Tue Dec 14 09:27:49 2004 +0000 +++ b/lispref/commands.texi Sat Dec 25 02:00:25 2004 +0000 @@ -2388,6 +2388,18 @@ Emacs version 18. @end defvar +@defmac while-no-input body... +This construct runs the @var{body} forms and returns the value +of the last one---but only if no input arrives. If any input +arrives during the execution of the @var{body} forms, it aborts +them (working much like a quit), and the @code{while-no-input} +form returns @code{nil}. + +If a part of @var{body} binds @code{inhibit-quit} to non-@code{nil}, +arrival of input during those parts won't cause an abort until +the end of that part. +@end defmac + @defun discard-input @cindex flush input @cindex discard input
--- a/man/ChangeLog Tue Dec 14 09:27:49 2004 +0000 +++ b/man/ChangeLog Sat Dec 25 02:00:25 2004 +0000 @@ -1,3 +1,40 @@ +2004-12-20 Jay Belanger <belanger@truman.edu> + + * calc.texi (Types Tutorial): Emphasized that you can't divide by + zero. + +2004-12-17 Luc Teirlinck <teirllm@auburn.edu> + + * cc-mode.texi (Text Filling and Line Breaking): Put period after + @xref. + (Font Locking): Avoid @strong{Note:}. + +2004-12-17 Michael Albinus <michael.albinus@gmx.de> + + Sync with Tramp 2.0.46. + + * tramp.texi (bottom): Add arch-tag. It was lost, somehow. + +2004-12-16 Luc Teirlinck <teirllm@auburn.edu> + + * url.texi: Correct typos. + (Retrieving URLs): @var{nil}->@code{nil}. + (HTTP language/coding, mailto): Replace "GNU Emacs Manual" with + the standard "The GNU Emacs Manual" in fifth argument of @xref's. + (Dealing with HTTP documents): @inforef->@xref. + +2004-12-15 Juri Linkov <juri@jurta.org> + + * mark.texi (Transient Mark, Mark Ring): M-< and other + movement commands don't set mark in Transient Mark mode + if mark is active. + +2004-12-15 Jay Belanger <belanger@truman.edu> + + * calc.texi: Consistently capitalized all mode names. + (Answers to Exercises): Mention that an answer can be a fraction + when in Fraction mode. + 2004-12-13 Jay Belanger <belanger@truman.edu> * calc.texi: Fix some TeX definitions.
--- a/man/calc.texi Tue Dec 14 09:27:49 2004 +0000 +++ b/man/calc.texi Sat Dec 25 02:00:25 2004 +0000 @@ -463,7 +463,7 @@ Moving data to and from regular editing buffers. @item -``Embedded mode'' for manipulating Calc formulas and data directly +Embedded mode for manipulating Calc formulas and data directly inside any editing buffer. @item @@ -766,7 +766,7 @@ @noindent Calc has several user interfaces that are specialized for different kinds of tasks. As well as Calc's standard interface, -there are Quick Mode, Keypad Mode, and Embedded Mode. +there are Quick mode, Keypad mode, and Embedded mode. @menu * Starting Calc:: @@ -801,7 +801,7 @@ want to use. To get Calc's standard interface, type @kbd{M-# c}. To get -Keypad Mode, type @kbd{M-# k}. Type @kbd{M-# ?} to get a brief +Keypad mode, type @kbd{M-# k}. Type @kbd{M-# ?} to get a brief list of the available options, and type a second @kbd{?} to get a complete list. @@ -814,7 +814,7 @@ If @kbd{M-#} doesn't work for you, you can always type explicit commands like @kbd{M-x calc} (for the standard user interface) or -@w{@kbd{M-x calc-keypad}} (for Keypad Mode). First type @kbd{M-x} +@w{@kbd{M-x calc-keypad}} (for Keypad mode). First type @kbd{M-x} (that's Meta with the letter @kbd{x}), then, at the prompt, type the full command (like @kbd{calc-keypad}) and press Return. @@ -917,11 +917,11 @@ @subsection Quick Mode (Overview) @noindent -@dfn{Quick Mode} is a quick way to use Calc when you don't need the +@dfn{Quick mode} is a quick way to use Calc when you don't need the full complexity of the stack and trail. To use it, type @kbd{M-# q} (@code{quick-calc}) in any regular editing buffer. -Quick Mode is very simple: It prompts you to type any formula in +Quick mode is very simple: It prompts you to type any formula in standard algebraic notation (like @samp{4 - 2/3}) and then displays the result at the bottom of the Emacs screen (@mathit{3.33333333333} in this case). You are then back in the same editing buffer you @@ -930,7 +930,7 @@ will also be in the Emacs ``kill ring'' so that a @kbd{C-y} command at this point will yank the result into your editing buffer. -Calc mode settings affect Quick Mode, too, though you will have to +Calc mode settings affect Quick mode, too, though you will have to go into regular Calc (with @kbd{M-# c}) to change the mode settings. @c [fix-ref Quick Calculator mode] @@ -940,12 +940,12 @@ @subsection Keypad Mode (Overview) @noindent -@dfn{Keypad Mode} is a mouse-based interface to the Calculator. +@dfn{Keypad mode} is a mouse-based interface to the Calculator. It is designed for use with terminals that support a mouse. If you -don't have a mouse, you will have to operate keypad mode with your +don't have a mouse, you will have to operate Keypad mode with your arrow keys (which is probably more trouble than it's worth). -Type @kbd{M-# k} to turn Keypad Mode on or off. Once again you +Type @kbd{M-# k} to turn Keypad mode on or off. Once again you get two new windows, this time on the righthand side of the screen instead of at the bottom. The upper window is the familiar Calc Stack; the lower window is a picture of a typical calculator keypad. @@ -981,12 +981,12 @@ |-----+-----+-----+-----+-----+ @end smallexample -Keypad Mode is much easier for beginners to learn, because there +Keypad mode is much easier for beginners to learn, because there is no need to memorize lots of obscure key sequences. But not all commands in regular Calc are available on the Keypad. You can always switch the cursor into the Calc stack window to use standard Calc commands if you need. Serious Calc users, though, -often find they prefer the standard interface over Keypad Mode. +often find they prefer the standard interface over Keypad mode. To operate the Calculator, just click on the ``buttons'' of the keypad using your left mouse button. To enter the two numbers @@ -999,13 +999,13 @@ math functions, vector operations, and operations on binary numbers. -Because Keypad Mode doesn't use the regular keyboard, Calc leaves +Because Keypad mode doesn't use the regular keyboard, Calc leaves the cursor in your original editing buffer. You can type in this buffer in the usual way while also clicking on the Calculator -keypad. One advantage of Keypad Mode is that you don't need an +keypad. One advantage of Keypad mode is that you don't need an explicit command to switch between editing and calculating. -If you press @kbd{M-# b} first, you get a full-screen Keypad Mode +If you press @kbd{M-# b} first, you get a full-screen Keypad mode (@code{full-calc-keypad}) with three windows: The keypad in the lower left, the stack in the lower right, and the trail on top. @@ -1043,7 +1043,7 @@ @subsection Embedded Mode (Overview) @noindent -@dfn{Embedded Mode} is a way to use Calc directly from inside an +@dfn{Embedded mode} is a way to use Calc directly from inside an editing buffer. Suppose you have a formula written as part of a document like this: @@ -1060,7 +1060,7 @@ @noindent and you wish to have Calc compute and format the derivative for you and store this derivative in the buffer automatically. To -do this with Embedded Mode, first copy the formula down to where +do this with Embedded mode, first copy the formula down to where you want the result to be: @smallexample @@ -1099,7 +1099,7 @@ @end smallexample To make this look nicer, you might want to press @kbd{d =} to center -the formula, and even @kbd{d B} to use ``big'' display mode. +the formula, and even @kbd{d B} to use Big display mode. @smallexample @group @@ -1139,7 +1139,7 @@ @end group @end smallexample -To leave Embedded Mode, type @kbd{M-# e} again. The mode line +To leave Embedded mode, type @kbd{M-# e} again. The mode line and keyboard will revert to the way they were before. (If you have actually been trying this as you read along, you'll want to press @kbd{M-# 0} [with the digit zero] now to reset the modes you changed.) @@ -1154,7 +1154,7 @@ @end smallexample Place the cursor on the @samp{1}, then type @kbd{M-# w} to enable -Embedded Mode on that number. Now type @kbd{3 /} (to get one-third), +Embedded mode on that number. Now type @kbd{3 /} (to get one-third), and @kbd{I T} (the Inverse Tangent converts a slope into an angle), then @w{@kbd{M-# w}} again to exit Embedded mode. @@ -1221,7 +1221,7 @@ Control whether @kbd{M-# c} and @kbd{M-# k} use the full screen. @item Q -Use Quick Mode for a single short calculation. +Use Quick mode for a single short calculation. @item K Turn Calc Keypad mode on or off. @@ -1270,7 +1270,7 @@ @end iftex @noindent -Commands for use with Embedded Mode: +Commands for use with Embedded mode: @table @kbd @item A @@ -1478,9 +1478,9 @@ @c [fix-ref Embedded Mode] This tutorial describes the standard user interface of Calc only. -The ``Quick Mode'' and ``Keypad Mode'' interfaces are fairly +The Quick mode and Keypad mode interfaces are fairly self-explanatory. @xref{Embedded Mode}, for a description of -the ``Embedded Mode'' interface. +the Embedded mode interface. @ifinfo The easiest way to read this tutorial on-line is to have two windows on @@ -1940,8 +1940,8 @@ @noindent If you are not used to RPN notation, you may prefer to operate the -Calculator in ``algebraic mode,'' which is closer to the way -non-RPN calculators work. In algebraic mode, you enter formulas +Calculator in Algebraic mode, which is closer to the way +non-RPN calculators work. In Algebraic mode, you enter formulas in traditional @expr{2+3} notation. You don't really need any special ``mode'' to enter algebraic formulas. @@ -2005,15 +2005,15 @@ equivalent to @samp{(2-3)-4} or @mathit{-5}, whereas @samp{2^3^4} is equivalent to @samp{2^(3^4)} (a very large integer; try it!). -If you tire of typing the apostrophe all the time, there is an -``algebraic mode'' you can select in which Calc automatically senses +If you tire of typing the apostrophe all the time, there is +Algebraic mode, where Calc automatically senses when you are about to type an algebraic expression. To enter this mode, press the two letters @w{@kbd{m a}}. (An @samp{Alg} indicator should appear in the Calc window's mode line.) Press @kbd{m a}, then @kbd{2+3+4} with no apostrophe, then @key{RET}. -In algebraic mode, when you press any key that would normally begin +In Algebraic mode, when you press any key that would normally begin entering a number (such as a digit, a decimal point, or the @kbd{_} key), or if you press @kbd{(} or @kbd{[}, Calc automatically begins an algebraic entry. @@ -2028,7 +2028,7 @@ be @expr{0.16227766017}. Note that if the formula begins with a function name, you need to use -the apostrophe even if you are in algebraic mode. If you type @kbd{arcsin} +the apostrophe even if you are in Algebraic mode. If you type @kbd{arcsin} out of the blue, the @kbd{a r} will be taken as an Algebraic Rewrite command, and the @kbd{csin} will be taken as the name of the rewrite rule to use! @@ -2037,7 +2037,7 @@ form because they find RPN entry with incomplete objects to be too distracting, even though they otherwise use Calc as an RPN calculator. -Still in algebraic mode, type: +Still in Algebraic mode, type: @smallexample @group @@ -2053,15 +2053,15 @@ an apostrophe first, but it also means we need to press @key{RET} after every entry, even for a simple number like @expr{1}. -(You can type @kbd{C-u m a} to enable a special ``incomplete algebraic -mode'' in which the @kbd{(} and @kbd{[} keys use algebraic entry even +(You can type @kbd{C-u m a} to enable a special Incomplete Algebraic +mode in which the @kbd{(} and @kbd{[} keys use algebraic entry even though regular numeric keys still use RPN numeric entry. There is also -a ``total algebraic mode,'' started by typing @kbd{m t}, in which all +Total Algebraic mode, started by typing @kbd{m t}, in which all normal keys begin algebraic entry. You must then use the @key{META} key -to type Calc commands: @kbd{M-m t} to get back out of total algebraic +to type Calc commands: @kbd{M-m t} to get back out of Total Algebraic mode, @kbd{M-q} to quit, etc.) -If you're still in algebraic mode, press @kbd{m a} again to turn it off. +If you're still in Algebraic mode, press @kbd{m a} again to turn it off. Actual non-RPN calculators use a mixture of algebraic and RPN styles. In general, operators of two numbers (like @kbd{+} and @kbd{*}) @@ -2376,7 +2376,7 @@ @noindent Calc has many types of @dfn{modes} that affect the way it interprets your commands or the way it displays data. We have already seen one -mode, namely algebraic mode. There are many others, too; we'll +mode, namely Algebraic mode. There are many others, too; we'll try some of the most common ones here. Perhaps the most fundamental mode in Calc is the current @dfn{precision}. @@ -2795,7 +2795,7 @@ @end group @end smallexample -Another interesting mode is @dfn{fraction mode}. Normally, +Another interesting mode is @dfn{Fraction mode}. Normally, dividing two integers produces a floating-point result if the quotient can't be expressed as an exact integer. Fraction mode causes integer division to produce a fraction, i.e., a rational @@ -2819,7 +2819,7 @@ (Calc uses @kbd{:} instead of @kbd{/} as the fraction separator because @kbd{/} is already used to divide the top two stack elements.) Calculations involving fractions will always -produce exact fractional results; fraction mode only says +produce exact fractional results; Fraction mode only says what to do when dividing two integers. @cindex Fractions vs. floats @@ -2830,7 +2830,7 @@ Typing @kbd{m f} doesn't change any existing values in the stack. In the above example, we had to Undo the division and do it over -again when we changed to fraction mode. But if you use the +again when we changed to Fraction mode. But if you use the evaluates-to operator you can get commands like @kbd{m f} to recompute for you. @@ -2846,7 +2846,7 @@ @noindent In this example, the righthand side of the @samp{=>} operator on the stack is recomputed when we change the precision, then -again when we change to fraction mode. All @samp{=>} expressions +again when we change to Fraction mode. All @samp{=>} expressions on the stack are recomputed every time you change any mode that might affect their values. @@ -4530,7 +4530,7 @@ Dividing by zero is normally treated as an error, but you can get Calc to write an answer in terms of infinity by pressing @kbd{m i} -to turn on ``infinite mode.'' +to turn on Infinite mode. @smallexample @group @@ -4757,10 +4757,11 @@ @end smallexample @noindent -In this last step, Calc has found a new number which, when multiplied -by 5 modulo 24, produces the original number, 21. If @var{m} is prime -it is always possible to find such a number. For non-prime @var{m} -like 24, it is only sometimes possible. +In this last step, Calc has divided by 5 modulo 24; i.e., it has found a +new number which, when multiplied by 5 modulo 24, produces the original +number, 21. If @var{m} is prime and the divisor is not a multiple of +@var{m}, it is always possible to find such a number. For non-prime +@var{m} like 24, it is only sometimes possible. @smallexample @group @@ -4960,7 +4961,7 @@ @subsection Basic Algebra @noindent -If you enter a formula in algebraic mode that refers to variables, +If you enter a formula in Algebraic mode that refers to variables, the formula itself is pushed onto the stack. You can manipulate formulas as regular data objects. @@ -5181,7 +5182,7 @@ multiple; choose the solution where the leading coefficient is one.) @xref{Algebra Answer 2, 2}. (@bullet{}) -The @kbd{m s} command enables ``symbolic mode,'' in which formulas +The @kbd{m s} command enables Symbolic mode, in which formulas like @samp{sqrt(5)} that can't be evaluated exactly are left in symbolic form rather than giving a floating-point approximate answer. Fraction mode (@kbd{m f}) is also useful when doing algebra. @@ -5196,7 +5197,7 @@ @end group @end smallexample -One more mode that makes reading formulas easier is ``Big mode.'' +One more mode that makes reading formulas easier is Big mode. @smallexample @group @@ -5344,7 +5345,7 @@ @noindent (If you got wildly different results, did you remember to switch -to radians mode?) +to Radians mode?) Here we have divided the curve into ten segments of equal width; approximating these segments as rectangular boxes (i.e., assuming @@ -5600,7 +5601,7 @@ another good reason to store your rules in variables rather than entering them on the fly. -(@bullet{}) @strong{Exercise 1.} Type @kbd{m s} to get symbolic +(@bullet{}) @strong{Exercise 1.} Type @kbd{m s} to get Symbolic mode, then enter the formula @samp{@w{(2 + sqrt(2))} / @w{(1 + sqrt(2))}}. Using a rewrite rule, simplify this formula by multiplying both sides by the conjugate @w{@samp{1 - sqrt(2)}}. The result will have @@ -5859,11 +5860,11 @@ @xref{Rewrites Answer 5, 5}. (@bullet{}) (@bullet{}) @strong{Exercise 6.} Calc considers the form @expr{0^0} -to be ``indeterminate,'' and leaves it unevaluated (assuming infinite +to be ``indeterminate,'' and leaves it unevaluated (assuming Infinite mode is not enabled). Some people prefer to define @expr{0^0 = 1}, so that the identity @expr{x^0 = 1} can safely be used for all @expr{x}. Find a way to make Calc follow this convention. What happens if you -now type @kbd{m i} to turn on infinite mode? +now type @kbd{m i} to turn on Infinite mode? @xref{Rewrites Answer 6, 6}. (@bullet{}) (@bullet{}) @strong{Exercise 7.} A Taylor series for a function is an @@ -6838,7 +6839,7 @@ times anything is zero.'' @c [fix-ref Infinities] -The @kbd{m i} command enables an @dfn{infinite mode} in which @expr{1 / 0} +The @kbd{m i} command enables an @dfn{Infinite mode} in which @expr{1 / 0} results in a special symbol that represents ``infinity.'' If you multiply infinity by zero, Calc uses another special new symbol to show that the answer is ``indeterminate.'' @xref{Infinities}, for @@ -7002,7 +7003,7 @@ Here are two solutions: Raise the precision enough that the floating-point round-off error is strictly to the right of the -decimal point. Or, convert to fraction mode so that @expr{123456789 / 2} +decimal point. Or, convert to Fraction mode so that @expr{123456789 / 2} produces the exact fraction @expr{123456789:2}, which can be rounded down by the @kbd{F} command without ever switching to floating-point format. @@ -7015,9 +7016,9 @@ does a floating-point calculation instead and produces @expr{1.5}. Calc will find an exact result for a logarithm if the result is an integer -or the reciprocal of an integer. But there is no efficient way to search -the space of all possible rational numbers for an exact answer, so Calc -doesn't try. +or (when in Fraction mode) the reciprocal of an integer. But there is +no efficient way to search the space of all possible rational numbers +for an exact answer, so Calc doesn't try. @node Vector Answer 1, Vector Answer 2, Arithmetic Answer 2, Answers to Exercises @subsection Vector Tutorial Exercise 1 @@ -7089,7 +7090,7 @@ @end group @end smallexample -This can be made more readable using @kbd{d B} to enable ``big'' display +This can be made more readable using @kbd{d B} to enable Big display mode: @smallexample @@ -7100,7 +7101,7 @@ @end group @end smallexample -Type @kbd{d N} to return to ``normal'' display mode afterwards. +Type @kbd{d N} to return to Normal display mode afterwards. @node Matrix Answer 3, List Answer 1, Matrix Answer 2, Answers to Exercises @subsection Matrix Tutorial Exercise 3 @@ -8247,7 +8248,7 @@ @samp{ln(0) = -inf}. Here we have an infinite answer to a finite input. As in the @expr{1 / 0} case, Calc will only use infinities -here if you have turned on ``infinite'' mode. Otherwise, it will +here if you have turned on Infinite mode. Otherwise, it will treat @samp{ln(0)} as an error. @node Types Answer 3, Types Answer 4, Types Answer 2, Answers to Exercises @@ -8461,7 +8462,7 @@ @w{@samp{1 / [0 .. 10]}}, also (potentially) divides by zero because zero is now a member of the interval. So Calc leaves this one unevaluated, too. -If you turn on ``infinite'' mode by pressing @kbd{m i}, you will +If you turn on Infinite mode by pressing @kbd{m i}, you will instead get the answer @samp{[0.1 .. inf]}, which includes infinity as a possible value. @@ -9124,7 +9125,7 @@ @end group @end smallexample -Perhaps more surprisingly, this rule still works with infinite mode +Perhaps more surprisingly, this rule still works with Infinite mode turned on. Calc tries @code{EvalRules} before any built-in rules for a function. This allows you to override the default behavior of any Calc feature: Even though Calc now wants to evaluate @expr{0^0} to @@ -9889,10 +9890,10 @@ and @samp{*Calc Trail*}. The former displays the contents of the Calculator stack and is manipulated exclusively through Calc commands. It is possible (though not usually necessary) to create several Calc -Mode buffers each of which has an independent stack, undo list, and +mode buffers each of which has an independent stack, undo list, and mode settings. There is exactly one Calc Trail buffer; it records a list of the results of all calculations that have been done. The -Calc Trail buffer uses a variant of Calc Mode, so Calculator commands +Calc Trail buffer uses a variant of Calc mode, so Calculator commands still work when the trail buffer's window is selected. It is possible to turn the trail window off, but the @samp{*Calc Trail*} buffer itself still exists and is updated silently. @xref{Trail Commands}. @@ -9906,7 +9907,7 @@ In most installations, the @kbd{M-# c} key sequence is a more convenient way to start the Calculator. Also, @kbd{M-# M-#} and @kbd{M-# #} are synonyms for @kbd{M-# c} unless you last used Calc -in its ``keypad'' mode. +in its Keypad mode. @kindex x @kindex M-x @@ -9978,7 +9979,7 @@ @pindex calc-quit @cindex Quitting the Calculator @cindex Exiting the Calculator -The @kbd{q} key (@code{calc-quit}) exits Calc Mode and closes the +The @kbd{q} key (@code{calc-quit}) exits Calc mode and closes the Calculator's window(s). It does not delete the Calculator buffers. If you type @kbd{M-x calc} again, the Calculator will reappear with the contents of the stack intact. Typing @kbd{M-# c} or @kbd{M-# M-#} @@ -10278,7 +10279,7 @@ clear previous results off the stack. You can press the apostrophe key during normal numeric entry to switch -the half-entered number into algebraic entry mode. One reason to do this +the half-entered number into Algebraic entry mode. One reason to do this would be to use the full Emacs cursor motion and editing keys, which are available during algebraic entry but not during numeric entry. @@ -10289,7 +10290,7 @@ @kindex m a @pindex calc-algebraic-mode -@cindex Algebraic mode +@cindex Algebraic Mode If you prefer algebraic entry, you can use the command @kbd{m a} (@code{calc-algebraic-mode}) to set Algebraic mode. In this mode, digits and other keys that would normally start numeric entry instead @@ -10300,7 +10301,7 @@ @kbd{2 @key{RET} 3 @key{RET} * 4 @key{RET} +} would accomplish the same thing as @kbd{2*3+4 @key{RET}}. -@cindex Incomplete algebraic mode +@cindex Incomplete Algebraic Mode If you give a numeric prefix argument like @kbd{C-u} to the @kbd{m a} command, it enables Incomplete Algebraic mode; this is like regular Algebraic mode except that it applies to the @kbd{(} and @kbd{[} keys @@ -10308,15 +10309,15 @@ @kindex m t @pindex calc-total-algebraic-mode -@cindex Total algebraic mode +@cindex Total Algebraic Mode The @kbd{m t} (@code{calc-total-algebraic-mode}) gives you an even stronger algebraic-entry mode, in which @emph{all} regular letter and punctuation keys begin algebraic entry. Use this if you prefer typing @w{@kbd{sqrt( )}} instead of @kbd{Q}, @w{@kbd{factor( )}} instead of @kbd{a f}, and so on. To type regular Calc commands when you are in -``total'' algebraic mode, hold down the @key{META} key. Thus @kbd{M-q} +Total Algebraic mode, hold down the @key{META} key. Thus @kbd{M-q} is the command to quit Calc, @kbd{M-p} sets the precision, and -@kbd{M-m t} (or @kbd{M-m M-t}, if you prefer) turns total algebraic +@kbd{M-m t} (or @kbd{M-m M-t}, if you prefer) turns Total Algebraic mode back off again. Meta keys also terminate algebraic entry, so that @kbd{2+3 M-S} is equivalent to @kbd{2+3 @key{RET} M-S}. The symbol @samp{Alg*} will appear in the mode line whenever you are in this mode. @@ -10577,7 +10578,7 @@ @noindent @pindex another-calc -It is possible to have any number of Calc Mode buffers at once. +It is possible to have any number of Calc mode buffers at once. Usually this is done by executing @kbd{M-x another-calc}, which is similar to @kbd{M-# c} except that if a @samp{*Calculator*} buffer already exists, a new, independent one with a name of the @@ -10792,7 +10793,7 @@ subtraction, and multiplication of integers always yields an exact integer result. (If the result of a division or exponentiation of integers is not an integer, it is expressed in fractional or -floating-point form according to the current Fraction Mode. +floating-point form according to the current Fraction mode. @xref{Fraction Mode}.) A decimal integer is represented as an optional sign followed by a @@ -10818,7 +10819,7 @@ written ``2/3'' but Calc uses the notation @samp{2:3}. (The @kbd{/} key performs RPN division; the following two sequences push the number @samp{2:3} on the stack: @kbd{2 :@: 3 @key{RET}}, or @kbd{2 @key{RET} 3 /} -assuming Fraction Mode has been enabled.) +assuming Fraction mode has been enabled.) When the Calculator produces a fractional result it always reduces it to simplest form, which may in fact be an integer. @@ -10932,7 +10933,7 @@ Operations on rectangular complex numbers yield rectangular complex results, and similarly for polar complex numbers. Where the two types are mixed, or where new complex numbers arise (as for the square root of -a negative real), the current @dfn{Polar Mode} is used to determine the +a negative real), the current @dfn{Polar mode} is used to determine the type. @xref{Polar Mode}. A complex result in which the imaginary part is zero (or the phase angle @@ -11020,7 +11021,7 @@ cannot be determined.) In Calc's notation, @samp{0 * inf = nan} and @samp{inf / inf = nan}. A few other common indeterminate expressions are @samp{inf - inf} and @samp{inf ^ 0}. Also, -@samp{0 / 0 = nan} if you have turned on ``infinite mode'' +@samp{0 / 0 = nan} if you have turned on Infinite mode (as described above). Infinities are especially useful as parts of @dfn{intervals}. @@ -11586,10 +11587,10 @@ get the other interpretation. If you omit the lower or upper limit, a default of @samp{-inf} or @samp{inf} (respectively) is furnished. -``Infinite mode'' also affects operations on intervals +Infinite mode also affects operations on intervals (@pxref{Infinities}). Calc will always introduce an open infinity, as in @samp{1 / (0 .. 2] = [0.5 .. inf)}. But closed infinities, -@w{@samp{1 / [0 .. 2] = [0.5 .. inf]}}, arise only in infinite mode; +@w{@samp{1 / [0 .. 2] = [0.5 .. inf]}}, arise only in Infinite mode; otherwise they are left unevaluated. Note that the ``direction'' of a zero is not an issue in this case since the zero is always assumed to be continuous with the rest of the interval. For intervals that @@ -11904,7 +11905,7 @@ algebraic entry (@kbd{'}), editing commands like @kbd{`} which parse the contents of the editing buffer when you finish, the @kbd{M-# g} and @w{@kbd{M-# r}} commands, the @kbd{C-y} command, the X window system -``paste'' mouse operation, and Embedded Mode. All of these operations +``paste'' mouse operation, and Embedded mode. All of these operations use the same rules for parsing formulas; in particular, language modes (@pxref{Language Modes}) affect them all in the same way. @@ -12313,7 +12314,7 @@ @pindex calc-mode-record-mode The @kbd{m R} (@code{calc-mode-record-mode}) command tells Calc to record the new mode settings (as if by pressing @kbd{m m}) every -time a mode setting changes. If Embedded Mode is enabled, other +time a mode setting changes. If Embedded mode is enabled, other options are available; @pxref{Mode Settings in Embedded Mode}. @kindex m F @@ -12494,7 +12495,7 @@ degrees, or an HMS form depending on the current angular mode. If the result is a complex number and the current mode is HMS, the number is instead expressed in degrees. (Complex-number calculations would -normally be done in radians mode, though. Complex numbers are converted +normally be done in Radians mode, though. Complex numbers are converted to degrees by calculating the complex result in radians and then multiplying by 180 over @cpi{}.) @@ -12507,7 +12508,7 @@ The @kbd{m r} (@code{calc-radians-mode}), @kbd{m d} (@code{calc-degrees-mode}), and @kbd{m h} (@code{calc-hms-mode}) commands control the angular mode. The current angular mode is displayed on the Emacs mode line. -The default angular mode is degrees. +The default angular mode is Degrees. @node Polar Mode, Fraction Mode, Angular Modes, Calculation Modes @subsection Polar Mode @@ -12523,7 +12524,7 @@ @kindex m p @pindex calc-polar-mode The @kbd{m p} (@code{calc-polar-mode}) command toggles complex-number -preference between rectangular and polar forms. In polar mode, all +preference between rectangular and polar forms. In Polar mode, all of the above example situations would produce polar complex numbers. @node Fraction Mode, Infinite Mode, Polar Mode, Calculation Modes @@ -12543,8 +12544,8 @@ To set the Calculator to produce fractional results for normal integer divisions, use the @kbd{m f} (@code{calc-frac-mode}) command. For example, @expr{8/4} produces @expr{2} in either mode, -but @expr{6/4} produces @expr{3:2} in Fraction Mode, @expr{1.5} in -Float Mode. +but @expr{6/4} produces @expr{3:2} in Fraction mode, @expr{1.5} in +Float mode. At any time you can use @kbd{c f} (@code{calc-float}) to convert a fraction to a float, or @kbd{c F} (@code{calc-fraction}) to convert a @@ -12567,25 +12568,25 @@ in calculations that already had infinities as inputs. (One exception is that infinite open intervals like @samp{[0 .. inf)} can be generated; however, intervals closed at infinity (@samp{[0 .. inf]}) -will not be generated when infinite mode is off.) - -With infinite mode turned on, @samp{1 / 0} will generate @code{uinf}, +will not be generated when Infinite mode is off.) + +With Infinite mode turned on, @samp{1 / 0} will generate @code{uinf}, an undirected infinity. @xref{Infinities}, for a discussion of the difference between @code{inf} and @code{uinf}. Also, @expr{0 / 0} evaluates to @code{nan}, the ``indeterminate'' symbol. Various other functions can also return infinities in this mode; for example, @samp{ln(0) = -inf}, and @samp{gamma(-7) = uinf}. Once again, -note that @samp{exp(inf) = inf} regardless of infinite mode because +note that @samp{exp(inf) = inf} regardless of Infinite mode because this calculation has infinity as an input. -@cindex Positive infinite mode +@cindex Positive Infinite mode The @kbd{m i} command with a numeric prefix argument of zero, -i.e., @kbd{C-u 0 m i}, turns on a ``positive infinite mode'' in +i.e., @kbd{C-u 0 m i}, turns on a Positive Infinite mode in which zero is treated as positive instead of being directionless. Thus, @samp{1 / 0 = inf} and @samp{-1 / 0 = -inf} in this mode. Note that zero never actually has a sign in Calc; there are no separate representations for @mathit{+0} and @mathit{-0}. Positive -infinite mode merely changes the interpretation given to the +Infinite mode merely changes the interpretation given to the single symbol, @samp{0}. One consequence of this is that, while you might expect @samp{1 / -0 = -inf}, actually @samp{1 / -0} is equivalent to @samp{1 / 0}, which is equal to positive @code{inf}. @@ -12604,7 +12605,7 @@ @kindex m s @pindex calc-symbolic-mode -In @dfn{symbolic mode}, controlled by the @kbd{m s} (@code{calc-symbolic-mode}) +In @dfn{Symbolic mode}, controlled by the @kbd{m s} (@code{calc-symbolic-mode}) command, functions which would produce inexact, irrational results are left in symbolic form. Thus @kbd{16 Q} pushes 4, but @kbd{2 Q} pushes @samp{sqrt(2)}. @@ -12631,12 +12632,12 @@ @cindex Scalar mode Calc sometimes makes assumptions during algebraic manipulation that are awkward or incorrect when vectors and matrices are involved. -Calc has two modes, @dfn{matrix mode} and @dfn{scalar mode}, which +Calc has two modes, @dfn{Matrix mode} and @dfn{Scalar mode}, which modify its behavior around vectors in useful ways. @kindex m v @pindex calc-matrix-mode -Press @kbd{m v} (@code{calc-matrix-mode}) once to enter matrix mode. +Press @kbd{m v} (@code{calc-matrix-mode}) once to enter Matrix mode. In this mode, all objects are assumed to be matrices unless provably otherwise. One major effect is that Calc will no longer consider multiplication to be commutative. (Recall that in matrix arithmetic, @@ -12655,18 +12656,18 @@ if it is combined with a scalar (as in @samp{idn(1) + 2}), Calc will assume it really was a scalar after all and produce, e.g., 3. -Press @kbd{m v} a second time to get scalar mode. Here, objects are +Press @kbd{m v} a second time to get Scalar mode. Here, objects are assumed @emph{not} to be vectors or matrices unless provably so. For example, normally adding a variable to a vector, as in @samp{[x, y, z] + a}, will leave the sum in symbolic form because as far as Calc knows, @samp{a} could represent either a number or -another 3-vector. In scalar mode, @samp{a} is assumed to be a +another 3-vector. In Scalar mode, @samp{a} is assumed to be a non-vector, and the addition is evaluated to @samp{[x+a, y+a, z+a]}. Press @kbd{m v} a third time to return to the normal mode of operation. If you press @kbd{m v} with a numeric prefix argument @var{n}, you -get a special ``dimensioned matrix mode'' in which matrices of +get a special ``dimensioned'' Matrix mode in which matrices of unknown size are assumed to be @var{n}x@var{n} square matrices. Then, the function call @samp{idn(1)} will expand into an actual matrix rather than representing a ``generic'' matrix. @@ -12687,11 +12688,11 @@ your earlier promise to Calc that @samp{a} would be scalar. Another way to mix scalars and matrices is to use selections -(@pxref{Selecting Subformulas}). Use matrix mode when operating on -your formula normally; then, to apply scalar mode to a certain part +(@pxref{Selecting Subformulas}). Use Matrix mode when operating on +your formula normally; then, to apply Scalar mode to a certain part of the formula without affecting the rest just select that part, -change into scalar mode and press @kbd{=} to resimplify the part -under this mode, then change back to matrix mode before deselecting. +change into Scalar mode and press @kbd{=} to resimplify the part +under this mode, then change back to Matrix mode before deselecting. @node Automatic Recomputation, Working Message, Matrix Mode, Calculation Modes @subsection Automatic Recomputation @@ -12707,7 +12708,7 @@ The @kbd{m C} (@code{calc-auto-recompute}) command turns this automatic recomputation on and off. If you turn it off, Calc will not update @samp{=>} operators on the stack (nor those in the -attached Embedded Mode buffer, if there is one). They will not +attached Embedded mode buffer, if there is one). They will not be updated unless you explicitly do so by pressing @kbd{=} or until you press @kbd{m C} to turn recomputation back on. (While automatic recomputation is off, you can think of @kbd{m C m C} as a command @@ -12828,7 +12829,7 @@ amount of simplification you will allow to be applied automatically, then use manual commands like @kbd{a s} and @kbd{c c} (@code{calc-clean}) to perform higher types of simplifications on demand. @xref{Algebraic -Definitions}, for another sample use of no-simplification mode. +Definitions}, for another sample use of No-Simplification mode. @node Declarations, Display Modes, Simplification Modes, Mode Settings @section Declarations @@ -13075,8 +13076,8 @@ never distinguishes between @code{vector} and @code{matrix} declarations.) -@xref{Matrix Mode}, for a discussion of ``matrix mode'' and -``scalar mode,'' which are similar to declaring @samp{[All, matrix]} +@xref{Matrix Mode}, for a discussion of Matrix mode and +Scalar mode, which are similar to declaring @samp{[All, matrix]} or @samp{[All, scalar]} but much more convenient. One more type symbol that is recognized is used with the @kbd{H a d} @@ -13228,8 +13229,8 @@ @tindex dscalar The @code{dscalar} function returns 1 if its argument is provably scalar, or 0 if its argument is provably non-scalar. It is left -unevaluated if this cannot be determined. (If matrix mode or scalar -mode are in effect, this function returns 1 or 0, respectively, +unevaluated if this cannot be determined. (If Matrix mode or Scalar +mode is in effect, this function returns 1 or 0, respectively, if it has no other information.) When Calc interprets a condition (say, in a rewrite rule) it considers an unevaluated formula to be ``false.'' Thus, @samp{dscalar(a)} is ``true'' only if @code{a} is @@ -13338,7 +13339,7 @@ @cindex Digit grouping Long numbers can be hard to read if they have too many digits. For example, the factorial of 30 is 33 digits long! Press @kbd{d g} -(@code{calc-group-digits}) to enable @dfn{grouping} mode, in which digits +(@code{calc-group-digits}) to enable @dfn{Grouping} mode, in which digits are displayed in clumps of 3 or 4 (depending on the current radix) separated by commas. @@ -13884,7 +13885,7 @@ Values on the stack are normally left-justified in the window. You can control this arrangement by typing @kbd{d <} (@code{calc-left-justify}), @kbd{d >} (@code{calc-right-justify}), or @kbd{d =} -(@code{calc-center-justify}). For example, in right-justification mode, +(@code{calc-center-justify}). For example, in Right-Justification mode, stack entries are displayed flush-right against the right edge of the window. @@ -13905,20 +13906,20 @@ origin and line width is slightly different in each justification mode. -In left-justified mode, the line is indented by a number of spaces +In Left-Justified mode, the line is indented by a number of spaces given by the origin (default zero). If the result is longer than the maximum line width, if given, or too wide to fit in the Calc window otherwise, then it is broken into lines which will fit; each broken line is indented to the origin. -In right-justified mode, lines are shifted right so that the rightmost +In Right-Justified mode, lines are shifted right so that the rightmost character is just before the origin, or just before the current window width if no origin was specified. If the line is too long for this, then it is broken; the current line width is used, if specified, or else the origin is used as a width if that is specified, or else the line is broken to fit in the window. -In centering mode, the origin is the column number of the center of +In Centering mode, the origin is the column number of the center of each stack entry. If a line width is specified, lines will not be allowed to go past that width; Calc will either indent less or break the lines if necessary. If no origin is specified, half the @@ -13953,13 +13954,13 @@ The @kbd{d @}} (@code{calc-right-label}) command similarly adds a label on the righthand side. It does not affect positioning of the stack entries unless they are right-justified. Also, if both -a line width and an origin are given in right-justified mode, the +a line width and an origin are given in Right-Justified mode, the stack entry is justified to the origin and the righthand label is justified to the line width. One application of labels would be to add equation numbers to formulas you are manipulating in Calc and then copying into a -document (possibly using Embedded Mode). The equations would +document (possibly using Embedded mode). The equations would typically be centered, and the equation numbers would be on the left or right as you prefer. @@ -14061,7 +14062,7 @@ @noindent in place of @samp{sqrt((a+1)/b + c^2)}. -Subscripts like @samp{a_i} are displayed as actual subscripts in ``big'' +Subscripts like @samp{a_i} are displayed as actual subscripts in Big mode. Double subscripts, @samp{a_i_j} (@samp{subscr(subscr(a, i), j)}) are displayed as @samp{a} with subscripts separated by commas: @samp{i, j}. They must still be entered in the usual underscore @@ -14134,12 +14135,12 @@ Octal and hexadecimal values are written with leading @samp{0} or @samp{0x} rather than using the @samp{#} symbol. Array subscripting is translated into @code{subscr} calls, so that @samp{a[i]} in C -mode is the same as @samp{a_i} in normal mode. Assignments +mode is the same as @samp{a_i} in Normal mode. Assignments turn into the @code{assign} function, which Calc normally displays using the @samp{:=} symbol. The variables @code{var-pi} and @code{var-e} would be displayed @samp{pi} -and @samp{e} in normal mode, but in C mode they are displayed as +and @samp{e} in Normal mode, but in C mode they are displayed as @samp{M_PI} and @samp{M_E}, corresponding to the names of constants typically provided in the @file{<math.h>} header. Functions whose names are different in C are translated automatically for entry and @@ -14181,7 +14182,7 @@ Underscores are allowed in variable and function names in all of these language modes. The underscore here is equivalent to the @samp{#} in -normal mode, or to hyphens in the underlying Emacs Lisp variable names. +Normal mode, or to hyphens in the underlying Emacs Lisp variable names. FORTRAN and Pascal modes normally do not adjust the case of letters in formulas. Most built-in Calc names use lower-case letters. If you use a @@ -14823,7 +14824,7 @@ @tindex choriz The @code{choriz} function takes a vector of objects and composes them horizontally. For example, @samp{choriz([17, a b/c, d])} formats -as @w{@samp{17a b / cd}} in normal language mode, or as +as @w{@samp{17a b / cd}} in Normal language mode, or as @example @group @@ -15086,7 +15087,7 @@ @tindex cwidth The @code{cwidth} function measures the width, in characters, of a composition. For example, @samp{cwidth(a + b)} is 5, and -@samp{cwidth(a / b)} is 5 in normal mode, 1 in Big mode, and 11 in +@samp{cwidth(a / b)} is 5 in Normal mode, 1 in Big mode, and 11 in @TeX{} mode (for @samp{@{a \over b@}}). The argument may involve the composition functions described in this section. @@ -15262,7 +15263,7 @@ @pindex calc-edit-user-syntax The @kbd{Z S} (@code{calc-edit-user-syntax}) command edits the syntax table for the current language mode. If you want your -syntax to work in any language, define it in the normal language +syntax to work in any language, define it in the Normal language mode. Type @kbd{M-# M-#} to finish editing the syntax table, or @kbd{M-# x} to cancel the edit. The @kbd{m m} command saves all the syntax tables along with the other mode settings; @@ -15293,7 +15294,7 @@ A @dfn{syntax table} is a list of user-defined @dfn{syntax rules}, which allow you to specify new patterns to define your own favorite input notations. Calc's parser always checks the syntax -table for the current language mode, then the table for the normal +table for the current language mode, then the table for the Normal language mode, before it uses its built-in rules to parse an algebraic formula you have entered. Each syntax rule should go on its own line; it consists of a @dfn{pattern}, a @samp{:=} symbol, @@ -15648,7 +15649,7 @@ @samp{i=1..10}. Then, we use @code{matches} to break it apart into its components. If the expression turns out not to match the pattern, the syntax rule will fail. Note that @kbd{Z S} always uses Calc's -normal language mode for editing expressions in syntax rules, so we +Normal language mode for editing expressions in syntax rules, so we must use regular Calc notation for the interval @samp{[b..c]} that will correspond to the Maple mode interval @samp{1..10}. @@ -15721,11 +15722,11 @@ Command is @kbd{m p}. @item -Matrix/scalar mode. Default value is @mathit{-1}. Value is 0 for scalar -mode, @mathit{-2} for matrix mode, or @var{N} for +Matrix/Scalar mode. Default value is @mathit{-1}. Value is 0 for Scalar +mode, @mathit{-2} for Matrix mode, or @var{N} for @texline @math{N\times N} @infoline @var{N}x@var{N} -matrix mode. Command is @kbd{m v}. +Matrix mode. Command is @kbd{m v}. @item Simplification mode. Default is 1. Value is @mathit{-1} for off (@kbd{m O}), @@ -15760,7 +15761,7 @@ @cindex Mode line indicators This section is a summary of all symbols that can appear on the Calc mode line, the highlighted bar that appears under the Calc -stack window (or under an editing window in Embedded Mode). +stack window (or under an editing window in Embedded mode). The basic mode line format is: @@ -15772,7 +15773,7 @@ regular Emacs commands are not allowed to edit the stack buffer as if it were text. -The word @samp{Calc:} changes to @samp{CalcEmbed:} if Embedded Mode +The word @samp{Calc:} changes to @samp{CalcEmbed:} if Embedded mode is enabled. The words after this describe the various Calc modes that are in effect. @@ -15800,7 +15801,7 @@ Matrix mode (@kbd{m v}; @pxref{Matrix Mode}). @item Matrix@var{n} -Dimensioned matrix mode (@kbd{C-u @var{n} m v}). +Dimensioned Matrix mode (@kbd{C-u @var{n} m v}). @item Scalar Scalar mode (@kbd{m v}; @pxref{Matrix Mode}). @@ -15815,7 +15816,7 @@ Infinite mode (@kbd{m i}; @pxref{Infinite Mode}). @item +Inf -Positive infinite mode (@kbd{C-u 0 m i}). +Positive Infinite mode (@kbd{C-u 0 m i}). @item NoSimp Default simplifications off (@kbd{m O}; @pxref{Simplification Modes}). @@ -16023,14 +16024,14 @@ If either argument of @kbd{+} is a complex number, the result will in general be complex. If one argument is in rectangular form and the other polar, -the current Polar Mode determines the form of the result. If Symbolic -Mode is enabled, the sum may be left as a formula if the necessary +the current Polar mode determines the form of the result. If Symbolic +mode is enabled, the sum may be left as a formula if the necessary conversions for polar addition are non-trivial. If both arguments of @kbd{+} are HMS forms, the forms are added according to the usual conventions of hours-minutes-seconds notation. If one argument is an HMS form and the other is a number, that number is converted from -degrees or radians (depending on the current Angular Mode) to HMS format +degrees or radians (depending on the current Angular mode) to HMS format and then the two HMS forms are added. If one argument of @kbd{+} is a date form, the other can be either a @@ -16182,7 +16183,7 @@ @tindex fdiv The @kbd{:} (@code{calc-fdiv}) command [@code{fdiv} function in a formula] divides the two integers on the top of the stack to produce a fractional -result. This is a convenient shorthand for enabling Fraction Mode (with +result. This is a convenient shorthand for enabling Fraction mode (with @kbd{m f}) temporarily and using @samp{/}. Note that during numeric entry the @kbd{:} key is interpreted as a fraction separator, so to divide 8 by 6 you would have to type @kbd{8 @key{RET} 6 @key{RET} :}. (Of course, in @@ -16236,7 +16237,7 @@ @tindex sqrt The @kbd{Q} (@code{calc-sqrt}) [@code{sqrt}] command computes the square root of a number. For a negative real argument, the result will be a -complex number whose form is determined by the current Polar Mode. +complex number whose form is determined by the current Polar mode. @kindex f h @pindex calc-hypot @@ -16298,7 +16299,7 @@ by a given power of ten. Thus, @samp{scf(mant(x), xpon(x)) = x} for any real @samp{x}. The second argument must be an integer, but the first may actually be any numeric value. For example, @samp{scf(5,-2) = 0.05} -or @samp{1:20} depending on the current Fraction Mode. +or @samp{1:20} depending on the current Fraction mode. @kindex f [ @kindex f ] @@ -16482,7 +16483,7 @@ The @code{calc-imaginary} command multiplies the number on the top of the stack by the imaginary number @expr{i = (0,1)}. This command is not normally bound to a key in Calc, but it is available -on the @key{IMAG} button in Keypad Mode. +on the @key{IMAG} button in Keypad mode. @kindex f r @pindex calc-re @@ -17761,7 +17762,7 @@ integrals or solving equations involving the functions. @ifinfo -These formulas are shown using the conventions of ``Big'' display +These formulas are shown using the conventions of Big display mode (@kbd{d B}); for example, the formula for @code{fv} written linearly is @samp{pmt * ((1 + rate)^n) - 1) / rate}. @@ -18217,7 +18218,7 @@ @infoline @expr{2^10 = 1024}. In certain cases like @samp{log(3,9)}, the result will be either @expr{1:2} or @expr{0.5} depending on the current Fraction -Mode setting. With the Inverse flag [@code{alog}], this command is +mode setting. With the Inverse flag [@code{alog}], this command is similar to @kbd{^} except that the order of the arguments is reversed. @kindex f I @@ -18273,7 +18274,7 @@ Also, the symbolic variable @code{pi} is not ordinarily recognized in arguments to trigonometric functions, as in @samp{sin(3 pi / 4)}, but the @kbd{a s} (@code{calc-simplify}) command recognizes many such -formulas when the current angular mode is radians @emph{and} symbolic +formulas when the current angular mode is Radians @emph{and} Symbolic mode is enabled; this example would be replaced by @samp{sqrt(2) / 2}. @xref{Symbolic Mode}. Beware, this simplification occurs even if you have stored a different value in the variable @samp{pi}; this is one @@ -18282,7 +18283,7 @@ Calc includes similar formulas for @code{cos} and @code{tan}. The @kbd{a s} command knows all angles which are integer multiples of -@cpiover{12}, @cpiover{10}, or @cpiover{8} radians. In degrees mode, +@cpiover{12}, @cpiover{10}, or @cpiover{8} radians. In Degrees mode, analogous simplifications occur for integer multiples of 15 or 18 degrees, and for arguments plus multiples of 90 degrees. @@ -18633,7 +18634,7 @@ The branch cuts are on the real axis, less than @mathit{-1} and greater than 1. The following tables for @code{arcsin}, @code{arccos}, and -@code{arctan} assume the current angular mode is radians. The +@code{arctan} assume the current angular mode is Radians. The hyperbolic functions operate independently of the angular mode. @smallexample @@ -19478,7 +19479,7 @@ not a vector. For example, if the input is the number @mathit{-5}, then @kbd{c-u -1 v u} yields @mathit{-5} and 0 (the components of @mathit{-5} when viewed as a rectangular complex number); @kbd{C-u -2 v u} yields 5 -and 180 (assuming degrees mode); and @kbd{C-u -10 v u} yields @mathit{-5} +and 180 (assuming Degrees mode); and @kbd{C-u -10 v u} yields @mathit{-5} and 1 (the numerator and denominator of @mathit{-5}, viewed as a rational number). Plain @kbd{v u} with this input would complain that the input is not a composite object. @@ -19608,7 +19609,7 @@ whose size is known, it is converted automatically to an identity matrix of a suitable matching size. The @kbd{v i} command with an argument of zero creates a generic identity matrix, @samp{idn(1)}. -Note that in dimensioned matrix mode (@pxref{Matrix Mode}), generic +Note that in dimensioned Matrix mode (@pxref{Matrix Mode}), generic identity matrices are immediately expanded to the current default dimensions. @@ -21265,11 +21266,11 @@ using regular Emacs editing commands. When doing algebraic work, you may find several of the Calculator's -modes to be helpful, including algebraic-simplification mode (@kbd{m A}) -or no-simplification mode (@kbd{m O}), -algebraic-entry mode (@kbd{m a}), fraction mode (@kbd{m f}), and -symbolic mode (@kbd{m s}). @xref{Mode Settings}, for discussions -of these modes. You may also wish to select ``big'' display mode (@kbd{d B}). +modes to be helpful, including Algebraic Simplification mode (@kbd{m A}) +or No-Simplification mode (@kbd{m O}), +Algebraic entry mode (@kbd{m a}), Fraction mode (@kbd{m f}), and +Symbolic mode (@kbd{m s}). @xref{Mode Settings}, for discussions +of these modes. You may also wish to select Big display mode (@kbd{d B}). @xref{Normal Language Modes}. @menu @@ -21323,7 +21324,7 @@ highlight the smallest portion of the formula that contains that character. By default the sub-formula is highlighted by blanking out all of the rest of the formula with dots. Selection works in any -display mode but is perhaps easiest in ``big'' (@kbd{d B}) mode. +display mode but is perhaps easiest in Big mode (@kbd{d B}). Suppose you enter the following formula: @smallexample @@ -21353,7 +21354,7 @@ Every character not part of the sub-formula @samp{b} has been changed to a dot. The @samp{*} next to the line number is to remind you that the formula has a portion of it selected. (In this case, it's very -obvious, but it might not always be. If Embedded Mode is enabled, +obvious, but it might not always be. If Embedded mode is enabled, the word @samp{Sel} also appears in the mode line because the stack may not be visible. @pxref{Embedded Mode}.) @@ -22003,9 +22004,9 @@ Use @kbd{a v} if you want the variables to ignore their stored values. If you give a numeric prefix argument of 2 to @kbd{a v}, it simplifies -as if in algebraic simplification mode. This is equivalent to typing +as if in Algebraic Simplification mode. This is equivalent to typing @kbd{a s}; @pxref{Simplifying Formulas}. If you give a numeric prefix -of 3 or more, it uses extended simplification mode (@kbd{a e}). +of 3 or more, it uses Extended Simplification mode (@kbd{a e}). If you give a negative prefix argument @mathit{-1}, @mathit{-2}, or @mathit{-3}, it simplifies in the corresponding mode but only works on the top-level @@ -22013,7 +22014,7 @@ simplify to @samp{(2 + 3)^2}, without simplifying the sub-formulas @samp{2 + 3}. As another example, typing @kbd{V R +} to sum the vector @samp{[1, 2, 3, 4]} produces the formula @samp{reduce(add, [1, 2, 3, 4])} -in no-simplify mode. Using @kbd{a v} will evaluate this all the way to +in No-Simplify mode. Using @kbd{a v} will evaluate this all the way to 10; using @kbd{C-u - a v} will evaluate it only to @samp{1 + 2 + 3 + 4}. (@xref{Reducing and Mapping}.) @@ -22021,7 +22022,7 @@ @tindex evalvn The @kbd{=} command corresponds to the @code{evalv} function, and the related @kbd{N} command, which is like @kbd{=} but temporarily -disables symbolic (@kbd{m s}) mode during the evaluation, corresponds +disables Symbolic mode (@kbd{m s}) during the evaluation, corresponds to the @code{evalvn} function. (These commands interpret their prefix arguments differently than @kbd{a v}; @kbd{=} treats the prefix as the number of stack elements to evaluate at once, and @kbd{N} treats @@ -22196,7 +22197,7 @@ to a function are somehow of the wrong type @expr{@t{tan}([2,3,4])}), range (@expr{@t{tan}(90)}), or number (@expr{@t{tan}(3,5)}), or if the function name is not recognized (@expr{@t{f}(5)}), or if -``symbolic'' mode (@pxref{Symbolic Mode}) prevents evaluation +Symbolic mode (@pxref{Symbolic Mode}) prevents evaluation (@expr{@t{sqrt}(2)}). Calc simplifies (evaluates) the arguments to a function before it @@ -22304,7 +22305,7 @@ The products @expr{1 a} and @expr{a 1} are simplified to @expr{a}; @expr{(-1) a} and @expr{a (-1)} are simplified to @expr{-a}; @expr{0 a} and @expr{a 0} are simplified to @expr{0}, except that -in matrix mode where @expr{a} is not provably scalar the result +in Matrix mode where @expr{a} is not provably scalar the result is the generic zero matrix @samp{idn(0)}, and that if @expr{a} is infinite the result is @samp{nan}. @@ -22330,18 +22331,18 @@ @expr{b}. The result is written using @samp{sqrt} or @samp{1/sqrt} if the sum of the powers is @expr{1/2} or @expr{-1/2}, respectively. If the sum of the powers is zero, the product is simplified to -@expr{1} or to @samp{idn(1)} if matrix mode is enabled. +@expr{1} or to @samp{idn(1)} if Matrix mode is enabled. The product of a negative power times anything but another negative power is changed to use division: @texline @math{x^{-2} y} @infoline @expr{x^(-2) y} -goes to @expr{y / x^2} unless matrix mode is +goes to @expr{y / x^2} unless Matrix mode is in effect and neither @expr{x} nor @expr{y} are scalar (in which case it is considered unsafe to rearrange the order of the terms). Finally, @expr{a (b/c)} is rewritten to @expr{(a b)/c}, and also -@expr{(a/b) c} is changed to @expr{(a c)/b} unless in matrix mode. +@expr{(a/b) c} is changed to @expr{(a c)/b} unless in Matrix mode. @tex \bigskip @@ -22368,7 +22369,7 @@ Also, @expr{(-a) / b} and @expr{a / (-b)} go to @expr{-(a/b)}; @expr{(a/b) / c} goes to @expr{a / (b c)}; and @expr{a / (b/c)} -goes to @expr{(a c) / b} unless matrix mode prevents this +goes to @expr{(a c) / b} unless Matrix mode prevents this rearrangement. Similarly, @expr{a / (b:c)} is simplified to @expr{(c:b) a} for any fraction @expr{b:c}. @@ -22392,7 +22393,7 @@ @end tex The formula @expr{x^0} is simplified to @expr{1}, or to @samp{idn(1)} -in matrix mode. The formula @expr{0^x} is simplified to @expr{0} +in Matrix mode. The formula @expr{0^x} is simplified to @expr{0} unless @expr{x} is a negative number or complex number, in which case the result is an infinity or an unsimplified formula according to the current infinite mode. Note that @expr{0^0} is an @@ -22568,7 +22569,7 @@ come first, and are sorted into increasing order. The @kbd{V S} command uses the same ordering when sorting a vector. -Sorting of terms of products is inhibited when matrix mode is +Sorting of terms of products is inhibited when Matrix mode is turned on; in this case, Calc will never exchange the order of two terms unless it knows at least one of the terms is a scalar. @@ -23176,7 +23177,7 @@ @var{n}th derivative. When working with trigonometric functions, it is best to switch to -radians mode first (with @w{@kbd{m r}}). The derivative of @samp{sin(x)} +Radians mode first (with @w{@kbd{m r}}). The derivative of @samp{sin(x)} in degrees is @samp{(pi/180) cos(x)}, probably not the expected answer! @@ -23267,7 +23268,7 @@ The Calculator remembers all the integrals it has done. If conditions change in a way that would invalidate the old integrals, say, a switch -from degrees to radians mode, then they will be thrown out. If you +from Degrees to Radians mode, then they will be thrown out. If you suspect this is not happening when it should, use the @code{calc-flush-caches} command; @pxref{Caches}. @@ -23626,10 +23627,10 @@ for @expr{x} by taking cube roots. But in many cases, like @expr{x^6 + x + 1}, Calc does not know how to rewrite the polynomial into a form it can solve. The @kbd{a P} command can still deliver a -list of numerical roots, however, provided that symbolic mode (@kbd{m s}) -is not turned on. (If you work with symbolic mode on, recall that the +list of numerical roots, however, provided that Symbolic mode (@kbd{m s}) +is not turned on. (If you work with Symbolic mode on, recall that the @kbd{N} (@code{calc-eval-num}) key is a handy way to reevaluate the -formula on the stack with symbolic mode temporarily off.) Naturally, +formula on the stack with Symbolic mode temporarily off.) Naturally, @kbd{a P} can only provide numerical roots if the polynomial coefficients are all numbers (real or complex). @@ -24244,9 +24245,9 @@ data exactly, it's no surprise that Calc chose a tiny contribution for @expr{x^2}. (The fact that it's not exactly zero is due only to roundoff error. Since our data are exact integers, we could get -an exact answer by typing @kbd{m f} first to get fraction mode. +an exact answer by typing @kbd{m f} first to get Fraction mode. Then the @expr{x^2} term would vanish altogether. Usually, though, -the data being fitted will be approximate floats so fraction mode +the data being fitted will be approximate floats so Fraction mode won't help.) Doing the @kbd{a F 2} fit on the data set with 14 instead of 13 @@ -24271,7 +24272,7 @@ @expr{0.0416666663588}, clearly suffer from loss of precision. It is a good idea to increase the working precision to several digits beyond what you need when you do a fitting operation. -Or, if your data are exact, use fraction mode to get exact +Or, if your data are exact, use Fraction mode to get exact results. You can type @kbd{i} instead of a digit at the model prompt to fit @@ -25942,12 +25943,12 @@ Note that @samp{*} is not commutative when applied to matrices, but rewrite rules pretend that it is. If you type @kbd{m v} to enable -matrix mode (@pxref{Matrix Mode}), rewrite rules will match @samp{*} +Matrix mode (@pxref{Matrix Mode}), rewrite rules will match @samp{*} literally, ignoring its usual commutativity property. (In the current implementation, the associativity also vanishes---it is as if the pattern had been enclosed in a @code{plain} marker; see below.) If you are applying rewrites to formulas with matrices, it's best to -enable matrix mode first to prevent algebraically incorrect rewrites +enable Matrix mode first to prevent algebraically incorrect rewrites from occurring. The pattern @samp{-x} will actually match any expression. For example, @@ -26424,8 +26425,8 @@ on both sides of a rewrite rule: @samp{apply(f, [x]) := f(x+1)} is @emph{not} correct, because it rewrites @samp{spam(6)} into @samp{f(7)}. The righthand side should be @samp{apply(f, [x+1])}. -Also note that you will have to use no-simplify (@kbd{m O}) -mode when entering this rule so that the @code{apply} isn't +Also note that you will have to use No-Simplify mode (@kbd{m O}) +when entering this rule so that the @code{apply} isn't evaluated immediately to get the new rule @samp{f(x) := f(x+1)}. Or, use @kbd{s e} to enter the rule without going through the stack, or enter the rule as @samp{apply(f, [x]) := apply(f, [x+1]) @w{:: 1}}. @@ -27160,7 +27161,7 @@ to expand trig functions. But if instead you store them in the variable @code{EvalRules}, they will automatically be applied to all sines and cosines of sums. Then, with @samp{2 x} and @samp{45} on -the stack, typing @kbd{+ S} will (assuming degrees mode) result in +the stack, typing @kbd{+ S} will (assuming Degrees mode) result in @samp{0.7071 sin(2 x) + 0.7071 cos(2 x)} automatically. As each level of a formula is evaluated, the rules from @@ -27236,11 +27237,11 @@ the multiplication, addition, and square root functions directly rather than applying the default simplifications to this formula. So an @code{EvalRules} rule that (perversely) rewrites @samp{sqrt(13) := 6} -would not apply. (However, if you put Calc into symbolic mode so that +would not apply. (However, if you put Calc into Symbolic mode so that @samp{sqrt(13)} will be left in symbolic form by the built-in square root function, your rule will be able to apply. But if the complex number were @expr{(3,4)}, so that @samp{sqrt(25)} must be calculated, -then symbolic mode will not help because @samp{sqrt(25)} can be +then Symbolic mode will not help because @samp{sqrt(25)} can be evaluated exactly to 5.) One subtle restriction that normally only manifests itself with @@ -27347,7 +27348,7 @@ This will simplify the formula whenever @expr{b} and/or @expr{c} can be made simpler by squaring. For example, applying this rule to @samp{2 / (sqrt(2) + 3)} yields @samp{6:7 - 2:7 sqrt(2)} (assuming -Symbolic Mode has been enabled to keep the square root from being +Symbolic mode has been enabled to keep the square root from being evaluated to a floating-point approximation). This rule is also useful when working with symbolic complex numbers, e.g., @samp{(a + b i) / (c + d i)}. @@ -27457,7 +27458,7 @@ display anomaly, however; @samp{mm} will work just fine as a representation of one millimeter. -You may find that Algebraic Mode (@pxref{Algebraic Entry}) makes working +You may find that Algebraic mode (@pxref{Algebraic Entry}) makes working with units expressions easier. Otherwise, you will have to remember to hit the apostrophe key every time you wish to enter units. @@ -28346,11 +28347,11 @@ formula @samp{x + y + x} is not handled by Calc's default simplifications, but the @kbd{a s} command will reduce it to the simpler form @samp{y + 2 x}. You can also type @kbd{m A} -to enable an algebraic-simplification mode in which the +to enable an Algebraic Simplification mode in which the equivalent of @kbd{a s} is used on all of Calc's results. If you enter @samp{x + y + x =>} normally, the result will be @samp{x + y + x => x + y + x}. If you change to -algebraic-simplification mode, the result will be +Algebraic Simplification mode, the result will be @samp{x + y + x => y + 2 x}. However, just pressing @kbd{a s} once will have no effect on @samp{x + y + x => x + y + x}, because the righthand side depends only on the lefthand side @@ -28389,13 +28390,13 @@ @pindex calc-assign @tindex assign @tindex := -Embedded Mode also uses @samp{=>} operators. In embedded mode, +Embedded mode also uses @samp{=>} operators. In Embedded mode, the lefthand side of an @samp{=>} operator can refer to variables assigned elsewhere in the file by @samp{:=} operators. The assignment operator @samp{a := 17} does not actually do anything -by itself. But Embedded Mode recognizes it and marks it as a sort +by itself. But Embedded mode recognizes it and marks it as a sort of file-local definition of the variable. You can enter @samp{:=} -operators in algebraic mode, or by using the @kbd{s :} +operators in Algebraic mode, or by using the @kbd{s :} (@code{calc-assign}) [@code{assign}] command which takes a variable and value from the stack and replaces them with an assignment. @@ -29096,7 +29097,7 @@ The commands in this chapter move information between the Calculator and other Emacs editing buffers. -In many cases Embedded Mode is an easier and more natural way to +In many cases Embedded mode is an easier and more natural way to work with Calc from a regular editing buffer. @xref{Embedded Mode}. @menu @@ -29367,7 +29368,7 @@ in the Calc window. @node Keypad Mode, Embedded Mode, Kill and Yank, Introduction -@chapter ``Keypad'' Mode +@chapter Keypad Mode @noindent @kindex M-# k @@ -29376,7 +29377,7 @@ and displays a picture of a calculator-style keypad. If you are using the X window system, you can click on any of the ``keys'' in the keypad using the left mouse button to operate the calculator. -The original window remains the selected window; in keypad mode +The original window remains the selected window; in Keypad mode you can type in your file while simultaneously performing calculations with the mouse. @@ -29392,11 +29393,11 @@ ``key,'' and type @key{SPC} or @key{RET}. If you think this is easier than using Calc normally, go right ahead. -Calc commands are more or less the same in keypad mode. Certain +Calc commands are more or less the same in Keypad mode. Certain keypad keys differ slightly from the corresponding normal Calc keystrokes; all such deviations are described below. -Keypad Mode includes many more commands than will fit on the keypad +Keypad mode includes many more commands than will fit on the keypad at once. Click the right mouse button [@code{calc-keypad-menu}] to switch to the next menu. The bottom five rows of the keypad stay the same; the top three rows change to a new set of commands. @@ -29444,7 +29445,7 @@ @end smallexample @noindent -This is the menu that appears the first time you start Keypad Mode. +This is the menu that appears the first time you start Keypad mode. It will show up in a vertical window on the right side of your screen. Above this menu is the traditional Calc stack display. On a 24-line screen you will be able to see the top three stack entries. @@ -29461,7 +29462,7 @@ stack. The @key{INV} and @key{HYP} keys modify other keys. As well as -having the effects described elsewhere in this manual, Keypad Mode +having the effects described elsewhere in this manual, Keypad mode defines several other ``inverse'' operations. These are described below and in the following sections. @@ -29481,7 +29482,7 @@ that would normally work in Calc mode. This can include a numeric prefix if you wish. It is also possible simply to switch into the Calc window and type commands in it; there is -nothing ``magic'' about this window when Keypad Mode is active. +nothing ``magic'' about this window when Keypad mode is active. The other keys in this display perform their obvious calculator functions. @key{CLN2} rounds the top-of-stack by temporarily @@ -29760,16 +29761,16 @@ The @key{STO} and @key{RCL} keys are analogous to @kbd{s t} and @kbd{s r} in regular Calc. @xref{Store and Recall}. Click the @key{STO} or @key{RCL} key, then one of the ten digits. (Named -variables are not available in Keypad Mode.) You can also use, +variables are not available in Keypad mode.) You can also use, for example, @kbd{STO + 3} to add to register 3. @node Embedded Mode, Programming, Keypad Mode, Top @chapter Embedded Mode @noindent -Embedded Mode in Calc provides an alternative to copying numbers +Embedded mode in Calc provides an alternative to copying numbers and formulas back and forth between editing buffers and the Calc -stack. In Embedded Mode, your editing buffer becomes temporarily +stack. In Embedded mode, your editing buffer becomes temporarily linked to the stack and this copying is taken care of automatically. @menu @@ -29794,7 +29795,7 @@ Calc normally scans backward and forward in the buffer for the nearest opening and closing @dfn{formula delimiters}. The simplest -delimiters are blank lines. Other delimiters that Embedded Mode +delimiters are blank lines. Other delimiters that Embedded mode understands are: @enumerate @@ -30352,15 +30353,15 @@ @section Mode Settings in Embedded Mode @noindent -Embedded Mode has a rather complicated mechanism for handling mode +Embedded mode has a rather complicated mechanism for handling mode settings in Embedded formulas. It is possible to put annotations in the file that specify mode settings either global to the entire file or local to a particular formula or formulas. In the latter case, different modes can be specified for use when a formula -is the enabled Embedded Mode formula. - -When you give any mode-setting command, like @kbd{m f} (for fraction -mode) or @kbd{d s} (for scientific notation), Embedded Mode adds +is the enabled Embedded mode formula. + +When you give any mode-setting command, like @kbd{m f} (for Fraction +mode) or @kbd{d s} (for scientific notation), Embedded mode adds a line like the following one to the file just before the opening delimiter of the formula. @@ -30413,7 +30414,7 @@ annotation by hand, be sure to give a proper value or results will be unpredictable. Mode-setting annotations are case-sensitive. -While Embedded Mode is enabled, the word @code{Local} appears in +While Embedded mode is enabled, the word @code{Local} appears in the mode line. This is to show that mode setting commands generate annotations that are ``local'' to the current formula or set of formulas. The @kbd{m R} (@code{calc-mode-record-mode}) command @@ -30429,7 +30430,7 @@ @end example The first kind of annotation will be used only while a formula -is enabled in Embedded Mode. The second kind will be used only +is enabled in Embedded mode. The second kind will be used only when the formula is @emph{not} enabled. (Whether the formula is ``active'' or not, i.e., whether Calc has seen this formula yet, is not relevant here.) @@ -30471,21 +30472,21 @@ on it in order to get it to notice the new annotation. Two more mode-recording modes selectable by @kbd{m R} are @code{Save} -(which works even outside of Embedded Mode), in which mode settings +(which works even outside of Embedded mode), in which mode settings are recorded permanently in your Emacs startup file @file{~/.emacs} rather than by annotating the current document, and no-recording mode (where there is no symbol like @code{Save} or @code{Local} in the mode line), in which mode-changing commands do not leave any annotations at all. -When Embedded Mode is not enabled, mode-recording modes except +When Embedded mode is not enabled, mode-recording modes except for @code{Save} have no effect. @node Customizing Embedded Mode, , Mode Settings in Embedded Mode, Embedded Mode @section Customizing Embedded Mode @noindent -You can modify Embedded Mode's behavior by setting various Lisp +You can modify Embedded mode's behavior by setting various Lisp variables described here. Use @kbd{M-x set-variable} or @kbd{M-x edit-options} to adjust a variable on the fly, or put a suitable @code{setq} statement in your @file{~/.emacs} @@ -30495,7 +30496,7 @@ Emacs manual}.) While none of these variables will be buffer-local by default, you -can make any of them local to any embedded-mode buffer. (Their +can make any of them local to any Embedded mode buffer. (Their values in the @samp{*Calculator*} buffer are never used.) @vindex calc-embedded-open-formula @@ -30584,7 +30585,7 @@ @vindex calc-embedded-close-plain The @code{calc-embedded-close-plain} variable is a string which ends a ``plain'' formula. The default is @code{" %%%\n"}. Without -the trailing newline here, the first line of a ``big'' mode formula +the trailing newline here, the first line of a Big mode formula that followed might be shifted over with respect to the other lines. @vindex calc-embedded-open-new-formula @@ -31045,7 +31046,7 @@ @cindex Restoring saved modes Keyboard macros sometimes want to operate under known conditions without affecting surrounding conditions. For example, a keyboard -macro may wish to turn on Fraction Mode, or set a particular +macro may wish to turn on Fraction mode, or set a particular precision, independent of the user's normal setting for those modes. @@ -31094,7 +31095,7 @@ In fact, @kbd{C-u Z `} is like @kbd{Z `} except that it sets the modes listed above to their default values. As usual, the matching @kbd{Z '} will restore the modes to their settings from before the @kbd{C-u Z `}. -Also, @w{@kbd{Z `}} with a negative prefix argument resets algebraic mode +Also, @w{@kbd{Z `}} with a negative prefix argument resets the algebraic mode to its default (off) but leaves the other modes the same as they were outside the construct. @@ -32166,7 +32167,7 @@ element is a formula string, then @code{calc-eval} sets all the various Calc modes to their default values while the formula is evaluated and formatted. For example, the precision is set to 12 -digits, digit grouping is turned off, and the normal language +digits, digit grouping is turned off, and the Normal language mode is used. This same principle applies to the other options discussed below. @@ -32189,7 +32190,7 @@ program actually considers the interaction with Calc's mode settings to be a feature. This will avoid all sorts of potential ``gotchas''; consider what happens with @samp{(calc-eval "sqrt(2)" 'num)} -when the user has left Calc in symbolic mode or no-simplify mode. +when the user has left Calc in Symbolic mode or No-Simplify mode. As another example, @samp{(equal (calc-eval '("$<$$") nil a b) "1")} checks if the number in string @expr{a} is less than the one in @@ -32765,7 +32766,7 @@ This function takes a Calc object and ``normalizes'' it. At the very least this involves re-rounding floating-point values according to the current precision and other similar jobs. Also, unless the user has -selected no-simplify mode (@pxref{Simplification Modes}), this involves +selected No-Simplify mode (@pxref{Simplification Modes}), this involves actually evaluating a formula object by executing the function calls it contains, and possibly also doing algebraic simplification, etc. @end defun @@ -33127,13 +33128,13 @@ @end defun @defun inexact-value -If Symbolic Mode is enabled, this will signal an error that causes +If Symbolic mode is enabled, this will signal an error that causes @code{normalize} to leave the formula in symbolic form, with the message -``Inexact result.'' (This function has no effect when not in Symbolic Mode.) -Note that if your function calls @samp{(sin 5)} in Symbolic Mode, the +``Inexact result.'' (This function has no effect when not in Symbolic mode.) +Note that if your function calls @samp{(sin 5)} in Symbolic mode, the @code{sin} function will call @code{inexact-value}, which will cause your function to be left unsimplified. You may instead wish to call -@samp{(normalize (list 'calcFunc-sin 5))}, which in Symbolic Mode will +@samp{(normalize (list 'calcFunc-sin 5))}, which in Symbolic mode will return the formula @samp{sin(5)} to your function. @end defun @@ -33179,9 +33180,9 @@ @code{reject-arg} or @code{inexact-result}, @code{normalize} returns the formula still in symbolic form. -If the current Simplification Mode is ``none'' or ``numeric arguments +If the current simplification mode is ``none'' or ``numeric arguments only,'' @code{normalize} will act appropriately. However, the more -powerful simplification modes (like algebraic simplification) are +powerful simplification modes (like Algebraic Simplification) are not handled by @code{normalize}. They are handled by @code{calc-normalize}, which calls @code{normalize} and possibly some other routines, such as @code{simplify} or @code{simplify-units}. Programs generally will @@ -33369,7 +33370,7 @@ If the current angular mode is Degrees or HMS, this function returns the integer 360. In Radians mode, this function returns either the corresponding value in radians to the current precision, or the formula -@samp{2*pi}, depending on the Symbolic Mode. There are also similar +@samp{2*pi}, depending on the Symbolic mode. There are also similar function @code{half-circle} and @code{quarter-circle}. @end defun @@ -33427,12 +33428,12 @@ @end defun @defun to-radians-2 a -Like @code{to-radians}, except that in Symbolic Mode a degrees to +Like @code{to-radians}, except that in Symbolic mode a degrees to radians conversion yields a formula like @samp{@var{a}*pi/180}. @end defun @defun from-radians-2 a -Like @code{from-radians}, except that in Symbolic Mode a radians to +Like @code{from-radians}, except that in Symbolic mode a radians to degrees conversion yields a formula like @samp{@var{a}*180/pi}. @end defun
--- a/man/cc-mode.texi Tue Dec 14 09:27:49 2004 +0000 +++ b/man/cc-mode.texi Sat Dec 25 02:00:25 2004 +0000 @@ -1420,7 +1420,7 @@ @code{c-block-comment-prefix} typically gets overriden by the default style @code{gnu}, which sets it to blank. You can see the line splitting effect described here by setting a different style, -e.g. @code{k&r} @xref{Choosing a Style}}, which makes a comment +e.g. @code{k&r} @xref{Choosing a Style}.}, which makes a comment @example /* Got O(n^2) here, which is a Bad Thing. */ @@ -1643,7 +1643,7 @@ @cindex font locking @comment !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -@strong{Note:} The font locking in AWK mode is currently not integrated +@strong{Please note:} The font locking in AWK mode is currently not integrated with the rest of @ccmode{}, so this section does not apply there. @xref{AWK Mode Font Locking}, instead.
--- a/man/mark.texi Tue Dec 14 09:27:49 2004 +0000 +++ b/man/mark.texi Sat Dec 25 02:00:25 2004 +0000 @@ -191,7 +191,9 @@ (@code{exchange-point-and-mark}). @item -@kbd{C-s} when the mark is active does not alter the mark. +Commands that normally set the mark before moving long distances (like +@kbd{M-<} and @kbd{C-s}) do not alter the mark in Transient Mark mode +when the mark is active. @item Some commands operate on the region if a region is active. For @@ -384,9 +386,10 @@ Many commands that can move long distances, such as @kbd{M-<} (@code{beginning-of-buffer}), start by setting the mark and saving the old mark on the mark ring. This is to make it easier for you to move -back later. Searches set the mark if they move point. You can tell -when a command sets the mark because it displays @samp{Mark set} in the -echo area. +back later. Searches set the mark if they move point. However, in +Transient Mark mode, these commands do not set the mark when the mark +is already active. You can tell when a command sets the mark because +it displays @samp{Mark set} in the echo area. If you want to move back to the same place over and over, the mark ring may not be convenient enough. If so, you can record the position
--- a/man/trampver.texi Tue Dec 14 09:27:49 2004 +0000 +++ b/man/trampver.texi Sat Dec 25 02:00:25 2004 +0000 @@ -4,7 +4,7 @@ @c In the Tramp CVS, the version number is auto-frobbed from @c configure.ac, so you should edit that file and run @c "autoconf && ./configure" to change the version number. -@set trampver 2.0.45 +@set trampver 2.0.46 @c Other flags from configuration @set prefix /usr/local
--- a/man/url.texi Tue Dec 14 09:27:49 2004 +0000 +++ b/man/url.texi Sat Dec 25 02:00:25 2004 +0000 @@ -27,7 +27,7 @@ Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with the -Invariant Sections being +Invariant Sections being ``GNU GENERAL PUBLIC LICENSE''. A copy of the license is included in the section entitled ``GNU Free Documentation License.'' @@ -74,9 +74,9 @@ * General Facilities:: URLs can be cached, accessed via a gateway and tracked in a history list. * Customization:: Variables you can alter. -* Function Index:: -* Variable Index:: -* Concept Index:: +* Function Index:: +* Variable Index:: +* Concept Index:: @end menu @node Getting Started @@ -115,7 +115,7 @@ the @var{path} component depends on the service. @menu -* Configuration:: +* Configuration:: * Parsed URLs:: URLs are parsed into vector structures. @end menu @@ -204,7 +204,7 @@ @defun url-retrieve-synchronously url Retrieve @var{url} synchronously and return a buffer containing the data. @var{url} is either a string or a parsed URL structure. Return -@var{nil} if there are no data associated with it (the case for dired, +@code{nil} if there are no data associated with it (the case for dired, info, or mailto URLs that need no further processing). @end defun @@ -214,7 +214,7 @@ has been completely retrieved, with the current buffer containing the object and any MIME headers associated with it. @var{url} is either a string or a parsed URL structure. Returns the buffer @var{url} will -load into, or @var{nil} if the process has already completed. +load into, or @code{nil} if the process has already completed. @end defun @node Supported URL Types @@ -222,7 +222,7 @@ @menu * http/https:: Hypertext Transfer Protocol. -* file/ftp:: Local files and FTP archives. +* file/ftp:: Local files and FTP archives. * info:: Emacs `Info' pages. * mailto:: Sending email. * news/nntp/snews:: Usenet news. @@ -235,7 +235,7 @@ @c * netrek:: @c * prospero:: * cid:: Content-ID. -* about:: +* about:: * ldap:: Lightweight Directory Access Protocol * imap:: IMAP mailboxes. * man:: Unix man pages. @@ -273,10 +273,10 @@ @menu -* Cookies:: -* HTTP language/coding:: -* HTTP URL Options:: -* Dealing with HTTP documents:: +* Cookies:: +* HTTP language/coding:: +* HTTP URL Options:: +* Dealing with HTTP documents:: @end menu @node Cookies @@ -330,7 +330,7 @@ can be weighted. In Emacs 21 this list is generated automatically from the list of defined coding systems which have associated MIME types. These are sorted by coding priority. @xref{Recognize Coding, -, Recognizing Coding Systems, emacs, GNU Emacs Manual}. +, Recognizing Coding Systems, emacs, The GNU Emacs Manual}. @end defopt @defopt url-mime-language-string @@ -384,9 +384,9 @@ HTTP URLs are retrieved into a buffer containing the HTTP headers followed by the body. Since the headers are quasi-MIME, they may be -processed using the MIME library. @inforef{Top, The MIME library, -emacs-mime}. The URL package provides a function to do this in -general: +processed using the MIME library. @xref{Top,, Emacs MIME, +emacs-mime, The Emacs MIME Manual}. The URL package provides a +function to do this in general: @defun url-decode-text-part handle &optional coding This function decodes charset-encoded text in the current buffer. In @@ -414,8 +414,8 @@ @end example These schemes are defined in RFC 1808. -@samp{ftp:} and @samp{file:} are synonomous in this library. They -allow reading arbitary files from hosts. Either @samp{ange-ftp} +@samp{ftp:} and @samp{file:} are synonymous in this library. They +allow reading arbitrary files from hosts. Either @samp{ange-ftp} (Emacs) or @samp{efs} (XEmacs) is used to retrieve them from remote hosts. Local files are accessed directly. @@ -451,13 +451,13 @@ @cindex email A mailto URL will send an email message to the address in the URL, for example @samp{mailto:foo@@bar.com} would compose a -message to @samp{foo@@bar.com}. +message to @samp{foo@@bar.com}. @defopt url-mail-command @vindex mail-user-agent The function called whenever url needs to send mail. This should normally be left to default from @var{mail-user-agent}. @xref{Mail -Methods, , Mail-Composition Methods, emacs, GNU Emacs Manual}. +Methods, , Mail-Composition Methods, emacs, The GNU Emacs Manual}. @end defopt An @samp{X-Url-From} header field containing the URL of the document @@ -468,7 +468,7 @@ @example @samp{mailto:@var{mailbox}[?@var{header}=@var{contents}[&@var{header}=@var{contents}]]} @end example -@noindent where an arbitary number of @var{header}s can be added. If the +@noindent where an arbitrary number of @var{header}s can be added. If the @var{header} is @samp{body}, then @var{contents} is put in the body otherwise a @var{header} header field is created with @var{contents} as its contents. Note that the URL library does not consider any @@ -493,11 +493,11 @@ allowed for nntp an snews. @table @samp -@item news:@var{newsgroup} +@item news:@var{newsgroup} Retrieves a list of messages in @var{newsgroup}; @item news:@var{message-id} Retrieves the message with the given @var{message-id}; -@item news:* +@item news:* Retrieves a list of all available newsgroups; @item nntp://@var{host}:@var{port}/@var{newsgroup} @itemx nntp://@var{host}:@var{port}/@var{message-id} @@ -510,7 +510,7 @@ @samp{snews} is the same as @samp{nntp} except that the default port is :563. @cindex SSL -(It is tunnelled through SSL.) +(It is tunneled through SSL.) An @samp{nntp} URL is the same as a news URL, except that the URL may specify an article by its number. @@ -550,9 +550,9 @@ @cindex IRC @cindex Internet Relay Chat @cindex ZEN IRC -@c Fixme: reference (was http://www.w3.org/Addressing/draft-mirashi-url-irc-01.txt) +@c Fixme: reference (was http://www.w3.org/Addressing/draft-mirashi-url-irc-01.txt) @dfn{Internet Relay Chat} (IRC) is handled by handing off the @sc{irc} -session to a function named in @code{url-irc-function}. +session to a function named in @code{url-irc-function}. @defopt url-irc-function A function to actually open an IRC connection. @@ -582,7 +582,7 @@ @samp{text/plain;charset=US-ASCII}. The @samp{text/plain} can be omitted but the charset parameter supplied. If @samp{;base64} is present, the @var{data} are base64-encoded. - + @node nfs @section nfs @cindex NFS @@ -658,11 +658,11 @@ @chapter Defining New URLs @menu -* Naming conventions:: -* Required functions:: -* Optional functions:: -* Asynchronous fetching:: -* Supporting file-name-handlers:: +* Naming conventions:: +* Required functions:: +* Optional functions:: +* Asynchronous fetching:: +* Supporting file-name-handlers:: @end menu @node Naming conventions @@ -684,10 +684,10 @@ @chapter General Facilities @menu -* Disk Caching:: -* Proxies:: -* Gateways in general:: -* History:: +* Disk Caching:: +* Proxies:: +* Gateways in general:: +* History:: @end menu @node Disk Caching @@ -761,7 +761,7 @@ @end smallexample @end defun -@c Fixme: never actually used currently? +@c Fixme: never actually used currently? @c @defopt url-standalone-mode @c @cindex Relying on cache @c @cindex Cache only mode @@ -783,7 +783,7 @@ @node Proxies @section Proxies and Gatewaying -@c fixme: check/document url-ns stuff +@c fixme: check/document url-ns stuff @cindex proxy servers @cindex proxies @cindex environment variables @@ -815,7 +815,7 @@ @noindent says to contact all machines in the @samp{aventail.com} and @samp{seanet.com} domains directly, as well as the machine named @samp{home.com}. If @code{NO_PROXY} isn't defined, @code{no_PROXY} -and @code{no_proxy} are also tried, in that order. +and @code{no_proxy} are also tried, in that order. Proxies may also be specified directly in Lisp. @@ -940,7 +940,7 @@ where @var{version} can be either 4 or 5. @end defopt @defvar socks-password -If this is @code{nil} then you will be asked for the passward, +If this is @code{nil} then you will be asked for the password, otherwise it will be used as the password for authenticating you to the @sc{socks} server. @end defvar @@ -980,9 +980,9 @@ @end defopt @menu -* Suppressing network connexions:: +* Suppressing network connexions:: @end menu -@c * Broken hostname resolution:: +@c * Broken hostname resolution:: @node Suppressing network connexions @subsection Suppressing Network Connexions @@ -1010,7 +1010,7 @@ @c @cindex resolver, hostname @c Some C libraries do not include the hostname resolver routines in @c their static libraries. If Emacs was linked statically, and was not -@c linked with the resolver libraries, it wil not be able to get to any +@c linked with the resolver libraries, it will not be able to get to any @c machines off the local network. This is characterized by being able @c to reach someplace with a raw ip number, but not its hostname @c (@url{http://129.79.254.191/} works, but @@ -1052,8 +1052,8 @@ strings. The times are in the format returned by @code{current-time}. @defun url-history-update-url url time -This function updates the hsitory table with an entry for @var{url} -accessed at the gievn @var{time}. +This function updates the history table with an entry for @var{url} +accessed at the given @var{time}. @end defun @defopt url-history-track @@ -1144,7 +1144,7 @@ only if an affirmative answer is given. @end defopt @defopt url-gateway-method -@c fixme: describe gatewaying +@c fixme: describe gatewaying A symbol specifying the type of gateway support to use fro connexions from the local machine. The supported methods are:
--- a/src/ChangeLog Tue Dec 14 09:27:49 2004 +0000 +++ b/src/ChangeLog Sat Dec 25 02:00:25 2004 +0000 @@ -1,3 +1,118 @@ +2004-12-23 Jan Dj,Ad(Brv <jan.h.d@swipnet.se> + + * keyboard.c (input_available_signal): Call SIGNAL_THREAD_CHECK + before touching input_available_clear_time, to avoid accessing it + from multiple threads. + +2004-12-23 Jason Rumney <jasonr@gnu.org> + + * image.c (__WIN32__) [HAVE_NTGUI]: Define for correct behaviour + of JPEG library. + +2004-12-22 Richard M. Stallman <rms@gnu.org> + + * emacs.c (main): If batch mode, set Vundo_outer_limit to nil. + + * lisp.h (Vundo_outer_limit): Fix decl. + + * undo.c (Vundo_outer_limit): Replaces undo_outer_limit. + Uses changed. + (syms_of_undo): Initialize appropriately. + (truncate_undo_list): If it's nil, there's no limit. + +2004-12-22 Kenichi Handa <handa@m17n.org> + + * xselect.c (Fx_get_cut_buffer_internal): Return a unibyte string. + +2004-12-21 Richard M. Stallman <rms@gnu.org> + + * eval.c (unwind_to_catch): Clear immediate_quit. + + * xdisp.c (get_next_display_element): Display codes 8a0 and 8ad + specially as `\ ' and `\-'. + + * keyboard.c (kbd_buffer_store_event_hold): + In the code for while-no-input, handle immediate_quit. + + * alloc.c (Fgarbage_collect): Update call to truncate_undo_list. + Call that at the very start. + (undo_limit, undo_strong_limit, undo_outer_limit): Moved to undo.c. + (syms_of_alloc): Don't define undo-limit, + undo-strong-limit and undo-outer-limit here. + + * undo.c (truncate_undo_list): Return void. + Take just one argument, the buffer. + Make it current, and inhibit recursive GC. + Access and update the undo list directly; return void. + Refer to the undo...limit variables directly. + Test undo_outer_limit only after counting the whole current command. + When it's exceeded, call the function in undo-outer-limit-function. + (undo_limit, undo_strong_limit, undo_outer_limit): From alloc.c. + (Vundo_outer_limit_function): New variable. + (syms_of_undo): Define undo-limit, undo-strong-limit + and undo-outer-limit here, and undo-outer-limit-function. + Doc fixes. + + * lisp.h (truncate_undo_list): Update decl. + +2004-12-21 Piet van Oostrum <piet@cs.uu.nl> + + * fileio.c (Fread_file_name): Delete duplicates in + file-name-history when history_delete_duplicates is true. + +2004-12-20 YAMAMOTO Mitsuharu <mituharu@math.s.chiba-u.ac.jp> + + * macterm.c (mac_do_list_fonts): Fix memory leak + +2004-12-20 Richard M. Stallman <rms@gnu.org> + + * regex.c (re_match_2_internal) <symend, wordend>: + Fix calls to UPDATE_SYNTAX_TABLE_FORWARD. + +2004-12-18 YAMAMOTO Mitsuharu <mituharu@math.s.chiba-u.ac.jp> + + * macterm.c (endif, x_font_name_to_mac_font_name): Use + maccentraleurroman instead of maccentraleuropean + (mac_c_string_match, mac_do_list_fonts): Speed up font search by + quickly finding a specific font without needing regexps. + +2004-12-15 Jan Dj,Ad(Brv <jan.h.d@swipnet.se> + + * syssignal.h: Declare main_thread. + (SIGNAL_THREAD_CHECK): New macro. + + * keyboard.c (input_available_signal): Move thread checking code + to macro SIGNAL_THREAD_CHECK and call that macro. + (interrupt_signal): Call SIGNAL_THREAD_CHECK. + + * alloc.c (uninterrupt_malloc): Move main_thread to emacs.c. + + * emacs.c: Define main_thread. + (main): Initialize main_thread. + (handle_USR1_signal, handle_USR2_signal, fatal_error_signal) + (memory_warning_signal): Call SIGNAL_THREAD_CHECK. + + * floatfns.c (float_error): Call SIGNAL_THREAD_CHECK. + + * dispnew.c (window_change_signal): Call SIGNAL_THREAD_CHECK. + + * sysdep.c (select_alarm): Call SIGNAL_THREAD_CHECK. + + * process.c (send_process_trap, sigchld_handler): Call + SIGNAL_THREAD_CHECK. + + * data.c (arith_error): Call SIGNAL_THREAD_CHECK. + + * atimer.c (alarm_signal_handler): Call SIGNAL_THREAD_CHECK. + + * xterm.c (xg_scroll_callback): Update XG_LAST_SB_DATA before + returning when xg_ignore_gtk_scrollbar is true. + +2004-12-14 Kim F. Storm <storm@cua.dk> + + * keyboard.c (read_char): Save and restore echo_string when + handling input method. + 2004-12-13 Richard M. Stallman <rms@gnu.org> * eval.c (syms_of_eval) <quit-flag>: Doc fix. @@ -143,6 +258,7 @@ * eval.c (Fcalled_interactively_p): Don't check INTERACTIVE. (interactive_p): Skip Scalled_interactively_p frames like Sinteractive_p frames. + (unwind_to_catch): Clear handling_signal. * data.c (Fmake_variable_buffer_local): Doc fix. (Fmake_local_variable): Doc fix.
--- a/src/alloc.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/alloc.c Sat Dec 25 02:00:25 2004 +0000 @@ -99,7 +99,7 @@ If Emacs sets malloc hooks (! SYSTEM_MALLOC) and the emacs_blocked_* functions below are called from malloc, there is a chance that one of these threads preempts the Emacs main thread and the hook variables - end up in a inconsistent state. So we have a mutex to prevent that (note + end up in an inconsistent state. So we have a mutex to prevent that (note that the backend handles concurrent access to malloc within its own threads but Emacs code running in the main thread is not included in that control). @@ -109,7 +109,6 @@ To prevent that, we only call BLOCK/UNBLOCK from the main thread. */ static pthread_mutex_t alloc_mutex; -pthread_t main_thread; #define BLOCK_INPUT_ALLOC \ do \ @@ -201,12 +200,6 @@ #endif /* VIRT_ADDR_VARIES */ int malloc_sbrk_unused; -/* Two limits controlling how much undo information to keep. */ - -EMACS_INT undo_limit; -EMACS_INT undo_strong_limit; -EMACS_INT undo_outer_limit; - /* Number of live and free conses etc. */ static int total_conses, total_markers, total_symbols, total_vector_size; @@ -1310,8 +1303,6 @@ pthread_mutexattr_init (&attr); pthread_mutexattr_settype (&attr, PTHREAD_MUTEX_RECURSIVE); pthread_mutex_init (&alloc_mutex, &attr); - - main_thread = pthread_self (); #endif /* HAVE_GTK_AND_PTHREAD */ if (__free_hook != emacs_blocked_free) @@ -4604,13 +4595,48 @@ if (abort_on_gc) abort (); - EMACS_GET_TIME (t1); - /* Can't GC if pure storage overflowed because we can't determine if something is a pure object or not. */ if (pure_bytes_used_before_overflow) return Qnil; + /* Don't keep undo information around forever. + Do this early on, so it is no problem if the user quits. */ + { + register struct buffer *nextb = all_buffers; + + while (nextb) + { + /* If a buffer's undo list is Qt, that means that undo is + turned off in that buffer. Calling truncate_undo_list on + Qt tends to return NULL, which effectively turns undo back on. + So don't call truncate_undo_list if undo_list is Qt. */ + if (! EQ (nextb->undo_list, Qt)) + truncate_undo_list (nextb); + + /* Shrink buffer gaps, but skip indirect and dead buffers. */ + if (nextb->base_buffer == 0 && !NILP (nextb->name)) + { + /* If a buffer's gap size is more than 10% of the buffer + size, or larger than 2000 bytes, then shrink it + accordingly. Keep a minimum size of 20 bytes. */ + int size = min (2000, max (20, (nextb->text->z_byte / 10))); + + if (nextb->text->gap_size > size) + { + struct buffer *save_current = current_buffer; + current_buffer = nextb; + make_gap (-(nextb->text->gap_size - size)); + current_buffer = save_current; + } + } + + nextb = nextb->next; + } + } + + EMACS_GET_TIME (t1); + /* In case user calls debug_print during GC, don't let that cause a recursive GC. */ consing_since_gc = 0; @@ -4649,42 +4675,6 @@ shrink_regexp_cache (); - /* Don't keep undo information around forever. */ - { - register struct buffer *nextb = all_buffers; - - while (nextb) - { - /* If a buffer's undo list is Qt, that means that undo is - turned off in that buffer. Calling truncate_undo_list on - Qt tends to return NULL, which effectively turns undo back on. - So don't call truncate_undo_list if undo_list is Qt. */ - if (! EQ (nextb->undo_list, Qt)) - nextb->undo_list - = truncate_undo_list (nextb->undo_list, undo_limit, - undo_strong_limit, undo_outer_limit); - - /* Shrink buffer gaps, but skip indirect and dead buffers. */ - if (nextb->base_buffer == 0 && !NILP (nextb->name)) - { - /* If a buffer's gap size is more than 10% of the buffer - size, or larger than 2000 bytes, then shrink it - accordingly. Keep a minimum size of 20 bytes. */ - int size = min (2000, max (20, (nextb->text->z_byte / 10))); - - if (nextb->text->gap_size > size) - { - struct buffer *save_current = current_buffer; - current_buffer = nextb; - make_gap (-(nextb->text->gap_size - size)); - current_buffer = save_current; - } - } - - nextb = nextb->next; - } - } - gc_in_progress = 1; /* clear_marks (); */ @@ -5959,29 +5949,6 @@ doc: /* Non-nil means loading Lisp code in order to dump an executable. This means that certain objects should be allocated in shared (pure) space. */); - DEFVAR_INT ("undo-limit", &undo_limit, - doc: /* Keep no more undo information once it exceeds this size. -This limit is applied when garbage collection happens. -The size is counted as the number of bytes occupied, -which includes both saved text and other data. */); - undo_limit = 20000; - - DEFVAR_INT ("undo-strong-limit", &undo_strong_limit, - doc: /* Don't keep more than this much size of undo information. -A previous command which pushes the undo list past this size -is entirely forgotten when GC happens. -The size is counted as the number of bytes occupied, -which includes both saved text and other data. */); - undo_strong_limit = 30000; - - DEFVAR_INT ("undo-outer-limit", &undo_outer_limit, - doc: /* Don't keep more than this much size of undo information. -If the current command has produced more than this much undo information, -GC discards it. This is a last-ditch limit to prevent memory overflow. -The size is counted as the number of bytes occupied, -which includes both saved text and other data. */); - undo_outer_limit = 300000; - DEFVAR_BOOL ("garbage-collection-messages", &garbage_collection_messages, doc: /* Non-nil means display messages at start and end of garbage collection. */); garbage_collection_messages = 0;
--- a/src/atimer.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/atimer.c Sat Dec 25 02:00:25 2004 +0000 @@ -364,6 +364,8 @@ { EMACS_TIME now; + SIGNAL_THREAD_CHECK (signo); + EMACS_GET_TIME (now); pending_atimers = 0;
--- a/src/data.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/data.c Sat Dec 25 02:00:25 2004 +0000 @@ -3262,6 +3262,7 @@ sigsetmask (SIGEMPTYMASK); #endif /* not BSD4_1 */ + SIGNAL_THREAD_CHECK (signo); Fsignal (Qarith_error, Qnil); }
--- a/src/dispnew.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/dispnew.c Sat Dec 25 02:00:25 2004 +0000 @@ -5980,6 +5980,9 @@ #endif int old_errno = errno; + signal (SIGWINCH, window_change_signal); + SIGNAL_THREAD_CHECK (signalnum); + get_frame_size (&width, &height); /* The frame size change obviously applies to a termcap-controlled @@ -6002,7 +6005,6 @@ } } - signal (SIGWINCH, window_change_signal); errno = old_errno; } #endif /* SIGWINCH */
--- a/src/emacs.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/emacs.c Sat Dec 25 02:00:25 2004 +0000 @@ -342,6 +342,14 @@ void (*fatal_error_signal_hook) P_ ((void)); +#ifdef HAVE_GTK_AND_PTHREAD +/* When compiled with GTK and running under Gnome, multiple threads meay be + created. Keep track of our main thread to make sure signals are delivered + to it (see syssignal.h). */ + +pthread_t main_thread; +#endif + #ifdef SIGUSR1 SIGTYPE @@ -350,6 +358,7 @@ { struct input_event buf; + SIGNAL_THREAD_CHECK (sig); bzero (&buf, sizeof buf); buf.kind = USER_SIGNAL_EVENT; buf.frame_or_window = selected_frame; @@ -365,6 +374,7 @@ { struct input_event buf; + SIGNAL_THREAD_CHECK (sig); bzero (&buf, sizeof buf); buf.kind = USER_SIGNAL_EVENT; buf.code = 1; @@ -379,6 +389,7 @@ fatal_error_signal (sig) int sig; { + SIGNAL_THREAD_CHECK (sig); fatal_error_code = sig; signal (sig, SIG_DFL); @@ -418,6 +429,7 @@ int sig; { signal (sig, memory_warning_signal); + SIGNAL_THREAD_CHECK (sig); malloc_warning ("Operating system warns that virtual memory is running low.\n"); @@ -1029,6 +1041,10 @@ # endif /* not SYNC_INPUT */ #endif /* not SYSTEM_MALLOC */ +#ifdef HAVE_GTK_AND_PTHREAD + main_thread = pthread_self (); +#endif /* HAVE_GTK_AND_PTHREAD */ + #if defined (MSDOS) || defined (WINDOWSNT) /* We do all file input/output as binary files. When we need to translate newlines, we do that manually. */ @@ -1117,7 +1133,10 @@ /* Handle the -batch switch, which means don't do interactive display. */ noninteractive = 0; if (argmatch (argv, argc, "-batch", "--batch", 5, NULL, &skip_args)) - noninteractive = 1; + { + noninteractive = 1; + Vundo_outer_limit = Qnil; + } if (argmatch (argv, argc, "-script", "--script", 3, &junk, &skip_args)) { noninteractive = 1; /* Set batch mode. */
--- a/src/eval.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/eval.c Sat Dec 25 02:00:25 2004 +0000 @@ -1178,6 +1178,7 @@ set_poll_suppress_count (catch->poll_suppress_count); interrupt_input_blocked = catch->interrupt_input_blocked; handling_signal = 0; + immediate_quit = 0; do {
--- a/src/fileio.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/fileio.c Sat Dec 25 02:00:25 2004 +0000 @@ -228,6 +228,8 @@ extern int minibuffer_auto_raise; +extern int history_delete_duplicates; + /* These variables describe handlers that have "already" had a chance to handle the current operation. @@ -6299,7 +6301,13 @@ if (replace_in_history) /* Replace what Fcompleting_read added to the history with what we will actually return. */ - XSETCAR (Fsymbol_value (Qfile_name_history), double_dollars (val)); + { + Lisp_Object val1 = double_dollars (val); + tem = Fsymbol_value (Qfile_name_history); + if (history_delete_duplicates) + XSETCDR (tem, Fdelete (val1, XCDR(tem))); + XSETCAR (tem, val1); + } else if (add_to_history) { /* Add the value to the history--but not if it matches @@ -6307,8 +6315,10 @@ Lisp_Object val1 = double_dollars (val); tem = Fsymbol_value (Qfile_name_history); if (! CONSP (tem) || NILP (Fequal (XCAR (tem), val1))) - Fset (Qfile_name_history, - Fcons (val1, tem)); + { + if (history_delete_duplicates) tem = Fdelete (val1, tem); + Fset (Qfile_name_history, Fcons (val1, tem)); + } } return val;
--- a/src/floatfns.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/floatfns.c Sat Dec 25 02:00:25 2004 +0000 @@ -981,6 +981,7 @@ signal (SIGILL, float_error); #endif /* BSD_SYSTEM */ + SIGNAL_THREAD_CHECK (signo); in_float = 0; Fsignal (Qarith_error, Fcons (float_error_arg, Qnil));
--- a/src/image.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/image.c Sat Dec 25 02:00:25 2004 +0000 @@ -6269,6 +6269,12 @@ #undef HAVE_STDLIB_H #endif /* HAVE_STLIB_H */ +#if defined (HAVE_NTGUI) && !defined (__WIN32__) +/* jpeglib.h will define boolean differently depending on __WIN32__, + so make sure it is defined. */ +#define __WIN32__ 1 +#endif + #include <jpeglib.h> #include <jerror.h> #include <setjmp.h>
--- a/src/keyboard.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/keyboard.c Sat Dec 25 02:00:25 2004 +0000 @@ -3043,6 +3043,7 @@ /* Save the echo status. */ int saved_immediate_echo = current_kboard->immediate_echo; struct kboard *saved_ok_to_echo = ok_to_echo_at_next_pause; + Lisp_Object saved_echo_string = current_kboard->echo_string; int saved_echo_after_prompt = current_kboard->echo_after_prompt; #if 0 @@ -3097,6 +3098,7 @@ cancel_echoing (); ok_to_echo_at_next_pause = saved_ok_to_echo; + current_kboard->echo_string = saved_echo_string; current_kboard->echo_after_prompt = saved_echo_after_prompt; if (saved_immediate_echo) echo_now (); @@ -3579,6 +3581,9 @@ } #endif + +Lisp_Object Vthrow_on_input; + /* Store an event obtained at interrupt level into kbd_buffer, fifo */ void @@ -3704,6 +3709,24 @@ *kbd_store_ptr = *event; ++kbd_store_ptr; } + + /* If we're inside while-no-input, and this event qualifies + as input, set quit-flag to cause an interrupt. */ + if (!NILP (Vthrow_on_input) + && event->kind != FOCUS_IN_EVENT + && event->kind != HELP_EVENT + && event->kind != DEICONIFY_EVENT) + { + Vquit_flag = Vthrow_on_input; + /* If we're inside a function that wants immediate quits, + do it now. */ + if (immediate_quit && NILP (Vinhibit_quit)) + { + immediate_quit = 0; + sigfree (); + QUIT; + } + } } @@ -6817,30 +6840,16 @@ sigisheld (SIGIO); #endif - if (input_available_clear_time) - EMACS_SET_SECS_USECS (*input_available_clear_time, 0, 0); - #ifdef SYNC_INPUT interrupt_input_pending = 1; #else - -# if !defined (SYSTEM_MALLOC) && defined (HAVE_GTK_AND_PTHREAD) - extern pthread_t main_thread; - if (pthread_self () != main_thread) - { - /* POSIX says any thread can receive the signal. On GNU/Linux that is - not true, but for other systems (FreeBSD at least) it is. So direct - the signal to the correct thread and block it from this thread. */ - sigset_t new_mask; - - sigemptyset (&new_mask); - sigaddset (&new_mask, SIGIO); - pthread_sigmask (SIG_BLOCK, &new_mask, 0); - pthread_kill (main_thread, SIGIO); - return; - } -# endif /* HAVE_GTK_AND_PTHREAD */ - + SIGNAL_THREAD_CHECK (signo); +#endif + + if (input_available_clear_time) + EMACS_SET_SECS_USECS (*input_available_clear_time, 0, 0); + +#ifndef SYNC_INPUT handle_async_input (); #endif @@ -10255,6 +10264,7 @@ } #endif /* USG */ + SIGNAL_THREAD_CHECK (signalnum); cancel_echoing (); if (!NILP (Vquit_flag) @@ -11375,6 +11385,12 @@ doc: /* *How long to display an echo-area message when the minibuffer is active. If the value is not a number, such messages don't time out. */); Vminibuffer_message_timeout = make_number (2); + + DEFVAR_LISP ("throw-on-input", &Vthrow_on_input, + doc: /* If non-nil, any keyboard input throws to this symbol. +The value of that variable is passed to `quit-flag' and later causes a +peculiar kind of quitting. */); + Vthrow_on_input = Qnil; } void
--- a/src/lisp.h Tue Dec 14 09:27:49 2004 +0000 +++ b/src/lisp.h Sat Dec 25 02:00:25 2004 +0000 @@ -3090,7 +3090,7 @@ /* defined in undo.c */ extern Lisp_Object Qinhibit_read_only; EXFUN (Fundo_boundary, 0); -extern Lisp_Object truncate_undo_list P_ ((Lisp_Object, int, int, int)); +extern void truncate_undo_list P_ ((struct buffer *)); extern void record_marker_adjustment P_ ((Lisp_Object, int)); extern void record_insert P_ ((int, int)); extern void record_delete P_ ((int, Lisp_Object)); @@ -3099,6 +3099,7 @@ extern void record_property_change P_ ((int, int, Lisp_Object, Lisp_Object, Lisp_Object)); extern void syms_of_undo P_ ((void)); +extern Lisp_Object Vundo_outer_limit; /* defined in textprop.c */ extern Lisp_Object Qfont, Qmouse_face;
--- a/src/macterm.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/macterm.c Sat Dec 25 02:00:25 2004 +0000 @@ -5997,7 +5997,7 @@ strcpy(cs, "mac-cyrillic"); break; case kTextEncodingMacCentralEurRoman: - strcpy(cs, "mac-centraleuropean"); + strcpy(cs, "mac-centraleurroman"); break; case kTextEncodingMacSymbol: case kTextEncodingMacDingbats: @@ -6055,7 +6055,7 @@ coding_system = Qeuc_kr; else if (strcmp (cs, "mac-roman") == 0 || strcmp (cs, "mac-cyrillic") == 0 - || strcmp (cs, "mac-centraleuropean") == 0 + || strcmp (cs, "mac-centraleurroman") == 0 || strcmp (cs, "adobe-fontspecific") == 0) strcpy (mf, family); else @@ -6300,6 +6300,28 @@ }; static Lisp_Object +mac_c_string_match (regexp, string, nonspecial, exact) + Lisp_Object regexp; + const char *string, *nonspecial; + int exact; +{ + if (exact) + { + if (strcmp (string, nonspecial) == 0) + return build_string (string); + } + else if (strstr (string, nonspecial)) + { + Lisp_Object str = build_string (string); + + if (fast_string_match (regexp, str) >= 0) + return str; + } + + return Qnil; +} + +static Lisp_Object mac_do_list_fonts (pattern, maxnames) char *pattern; int maxnames; @@ -6310,6 +6332,8 @@ char scaled[256]; char *ptr; int scl_val[XLFD_SCL_LAST], *field, *val; + char *longest_start, *cur_start, *nonspecial; + int longest_len, cur_len, exact; for (i = 0; i < XLFD_SCL_LAST; i++) scl_val[i] = -1; @@ -6367,34 +6391,66 @@ ptr = regex; *ptr++ = '^'; - /* Turn pattern into a regexp and do a regexp match. */ + longest_start = cur_start = ptr; + longest_len = cur_len = 0; + exact = 1; + + /* Turn pattern into a regexp and do a regexp match. Also find the + longest substring containing no special characters. */ for (; *pattern; pattern++) { - if (*pattern == '?') - *ptr++ = '.'; - else if (*pattern == '*') - { - *ptr++ = '.'; - *ptr++ = '*'; - } + if (*pattern == '?' || *pattern == '*') + { + if (cur_len > longest_len) + { + longest_start = cur_start; + longest_len = cur_len; + } + cur_len = 0; + exact = 0; + + if (*pattern == '?') + *ptr++ = '.'; + else /* if (*pattern == '*') */ + { + *ptr++ = '.'; + *ptr++ = '*'; + } + } else - *ptr++ = tolower (*pattern); - } + { + if (cur_len == 0) + cur_start = ptr; + cur_len++; + + *ptr++ = tolower (*pattern); + } + } + + if (cur_len > longest_len) + { + longest_start = cur_start; + longest_len = cur_len; + } + *ptr = '$'; *(ptr + 1) = '\0'; + nonspecial = xmalloc (longest_len + 1); + strncpy (nonspecial, longest_start, longest_len); + nonspecial[longest_len] = '\0'; + pattern_regex = build_string (regex); for (i = 0; i < font_name_count; i++) { - fontname = build_string (font_name_table[i]); - if (fast_string_match (pattern_regex, fontname) >= 0) + fontname = mac_c_string_match (pattern_regex, font_name_table[i], + nonspecial, exact); + if (!NILP (fontname)) { font_list = Fcons (fontname, font_list); - - n_fonts++; - if (maxnames > 0 && n_fonts >= maxnames) - break; + if (exact || maxnames > 0 && ++n_fonts >= maxnames) + break; } else if (scl_val[XLFD_SCL_PIXEL_SIZE] > 0 && (ptr = strstr (font_name_table[i], "-0-0-75-75-m-0-"))) @@ -6408,17 +6464,19 @@ scl_val[XLFD_SCL_POINT_SIZE], scl_val[XLFD_SCL_AVGWIDTH], ptr + sizeof ("-0-0-75-75-m-0-") - 1); - fontname = build_string (scaled); - if (fast_string_match (pattern_regex, fontname) >= 0) + fontname = mac_c_string_match (pattern_regex, scaled, + nonspecial, exact); + if (!NILP (fontname)) { font_list = Fcons (fontname, font_list); - - n_fonts++; - if (maxnames > 0 && n_fonts >= maxnames) + if (exact || maxnames > 0 && ++n_fonts >= maxnames) break; } } } + + xfree (nonspecial); + return font_list; }
--- a/src/process.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/process.c Sat Dec 25 02:00:25 2004 +0000 @@ -5109,6 +5109,7 @@ SIGTYPE send_process_trap () { + SIGNAL_THREAD_CHECK (SIGPIPE); #ifdef BSD4_1 sigrelse (SIGPIPE); sigrelse (SIGALRM); @@ -6144,6 +6145,8 @@ register struct Lisp_Process *p; extern EMACS_TIME *input_available_clear_time; + SIGNAL_THREAD_CHECK (signo); + #ifdef BSD4_1 extern int sigheld; sigheld |= sigbit (SIGCHLD);
--- a/src/regex.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/regex.c Sat Dec 25 02:00:25 2004 +0000 @@ -6096,7 +6096,7 @@ PREFETCH_NOLIMIT (); c2 = RE_STRING_CHAR (d, dend - d); #ifdef emacs - UPDATE_SYNTAX_TABLE_FORWARD (charpos); + UPDATE_SYNTAX_TABLE_FORWARD (charpos + 1); #endif s2 = SYNTAX (c2);
--- a/src/sysdep.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/sysdep.c Sat Dec 25 02:00:25 2004 +0000 @@ -2472,6 +2472,7 @@ #else /* not BSD4_1 */ signal (SIGALRM, SIG_IGN); #endif /* not BSD4_1 */ + SIGNAL_THREAD_CHECK (SIGALRM); if (read_alarm_should_throw) longjmp (read_alarm_throw, 1); }
--- a/src/syssignal.h Tue Dec 14 09:27:49 2004 +0000 +++ b/src/syssignal.h Sat Dec 25 02:00:25 2004 +0000 @@ -20,6 +20,11 @@ extern void init_signals P_ ((void)); +#ifdef HAVE_GTK_AND_PTHREAD +#include <pthread.h> +extern pthread_t main_thread; +#endif + #ifdef POSIX_SIGNALS /* Don't #include <signal.h>. That header should always be #included @@ -198,5 +203,27 @@ char *strsignal (); #endif +#ifdef HAVE_GTK_AND_PTHREAD +#define SIGNAL_THREAD_CHECK(signo) \ + do { \ + if (pthread_self () != main_thread) \ + { \ + /* POSIX says any thread can receive the signal. On GNU/Linux \ + that is not true, but for other systems (FreeBSD at least) \ + it is. So direct the signal to the correct thread and block \ + it from this thread. */ \ + sigset_t new_mask; \ + \ + sigemptyset (&new_mask); \ + sigaddset (&new_mask, signo); \ + pthread_sigmask (SIG_BLOCK, &new_mask, 0); \ + pthread_kill (main_thread, signo); \ + return; \ + } \ + } while (0) + +#else /* not HAVE_GTK_AND_PTHREAD */ +#define SIGNAL_THREAD_CHECK(signo) +#endif /* not HAVE_GTK_AND_PTHREAD */ /* arch-tag: 4580e86a-340d-4574-9e11-a742b6e1a152 (do not change this comment) */
--- a/src/undo.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/undo.c Sat Dec 25 02:00:25 2004 +0000 @@ -24,6 +24,17 @@ #include "buffer.h" #include "commands.h" +/* Limits controlling how much undo information to keep. */ + +EMACS_INT undo_limit; +EMACS_INT undo_strong_limit; + +Lisp_Object Vundo_outer_limit; + +/* Function to call when undo_outer_limit is exceeded. */ + +Lisp_Object Vundo_outer_limit_function; + /* Last buffer for which undo information was recorded. */ Lisp_Object last_undo_buffer; @@ -291,31 +302,35 @@ } /* At garbage collection time, make an undo list shorter at the end, - returning the truncated list. - MINSIZE, MAXSIZE and LIMITSIZE are the limits on size allowed, - as described below. - In practice, these are the values of undo-limit, - undo-strong-limit, and undo-outer-limit. */ + returning the truncated list. How this is done depends on the + variables undo-limit, undo-strong-limit and undo-outer-limit. + In some cases this works by calling undo-outer-limit-function. */ -Lisp_Object -truncate_undo_list (list, minsize, maxsize, limitsize) - Lisp_Object list; - int minsize, maxsize, limitsize; +void +truncate_undo_list (b) + struct buffer *b; { + Lisp_Object list; Lisp_Object prev, next, last_boundary; int size_so_far = 0; + /* Make sure that calling undo-outer-limit-function + won't cause another GC. */ + int count = inhibit_garbage_collection (); + + /* Make the buffer current to get its local values of variables such + as undo_limit. Also so that Vundo_outer_limit_function can + tell which buffer to operate on. */ + record_unwind_protect (set_buffer_if_live, Fcurrent_buffer ()); + set_buffer_internal (b); + + list = b->undo_list; + prev = Qnil; next = list; last_boundary = Qnil; - /* Always preserve at least the most recent undo record - unless it is really horribly big. - If the first element is an undo boundary, skip past it. - - Skip, skip, skip the undo, skip, skip, skip the undo, - Skip, skip, skip the undo, skip to the undo bound'ry. - (Get it? "Skip to my Loo?") */ + /* If the first element is an undo boundary, skip past it. */ if (CONSP (next) && NILP (XCAR (next))) { /* Add in the space occupied by this element and its chain link. */ @@ -326,6 +341,12 @@ next = XCDR (next); } + /* Always preserve at least the most recent undo record + unless it is really horribly big. + + Skip, skip, skip the undo, skip, skip, skip the undo, + Skip, skip, skip the undo, skip to the undo bound'ry. */ + while (CONSP (next) && ! NILP (XCAR (next))) { Lisp_Object elt; @@ -341,35 +362,53 @@ + SCHARS (XCAR (elt))); } - /* If we reach LIMITSIZE before the first boundary, - we're heading for memory full, so truncate the list to nothing. */ - if (size_so_far > limitsize) - return Qnil; - /* Advance to next element. */ prev = next; next = XCDR (next); } + /* If by the first boundary we have already passed undo_outer_limit, + we're heading for memory full, so offer to clear out the list. */ + if (INTEGERP (Vundo_outer_limit) + && size_so_far > XINT (Vundo_outer_limit) + && !NILP (Vundo_outer_limit_function)) + { + Lisp_Object temp = last_undo_buffer; + + /* Normally the function this calls is undo-outer-limit-truncate. */ + if (! NILP (call1 (Vundo_outer_limit_function, + make_number (size_so_far)))) + { + /* The function is responsible for making + any desired changes in buffer-undo-list. */ + unbind_to (count, Qnil); + return; + } + /* That function probably used the minibuffer, and if so, that + changed last_undo_buffer. Change it back so that we don't + force next change to make an undo boundary here. */ + last_undo_buffer = temp; + } + if (CONSP (next)) last_boundary = prev; - /* Keep more if it fits. */ + /* Keep additional undo data, if it fits in the limits. */ while (CONSP (next)) { Lisp_Object elt; elt = XCAR (next); /* When we get to a boundary, decide whether to truncate - either before or after it. The lower threshold, MINSIZE, + either before or after it. The lower threshold, undo_limit, tells us to truncate after it. If its size pushes past - the higher threshold MAXSIZE as well, we truncate before it. */ + the higher threshold undo_strong_limit, we truncate before it. */ if (NILP (elt)) { - if (size_so_far > maxsize) + if (size_so_far > undo_strong_limit) break; last_boundary = prev; - if (size_so_far > minsize) + if (size_so_far > undo_limit) break; } @@ -390,16 +429,15 @@ /* If we scanned the whole list, it is short enough; don't change it. */ if (NILP (next)) - return list; - + ; /* Truncate at the boundary where we decided to truncate. */ - if (!NILP (last_boundary)) - { - XSETCDR (last_boundary, Qnil); - return list; - } + else if (!NILP (last_boundary)) + XSETCDR (last_boundary, Qnil); + /* There's nothing we decided to keep, so clear it out. */ else - return Qnil; + b->undo_list = Qnil; + + unbind_to (count, Qnil); } DEFUN ("primitive-undo", Fprimitive_undo, Sprimitive_undo, 2, 2, 0, @@ -563,6 +601,54 @@ defsubr (&Sprimitive_undo); defsubr (&Sundo_boundary); + + DEFVAR_INT ("undo-limit", &undo_limit, + doc: /* Keep no more undo information once it exceeds this size. +This limit is applied when garbage collection happens. +When a previous command increases the total undo list size past this +value, the earlier commands that came before it are forgotten. + +The size is counted as the number of bytes occupied, +which includes both saved text and other data. */); + undo_limit = 20000; + + DEFVAR_INT ("undo-strong-limit", &undo_strong_limit, + doc: /* Don't keep more than this much size of undo information. +This limit is applied when garbage collection happens. +When a previous command increases the total undo list size past this +value, that command and the earlier commands that came before it are forgotten. +However, the most recent buffer-modifying command's undo info +is never discarded for this reason. + +The size is counted as the number of bytes occupied, +which includes both saved text and other data. */); + undo_strong_limit = 30000; + + DEFVAR_LISP ("undo-outer-limit", &Vundo_outer_limit, + doc: /* Outer limit on size of undo information for one command. +At garbage collection time, if the current command has produced +more than this much undo information, it asks you whether to delete +the information. This is a last-ditch limit to prevent memory overflow. + +The size is counted as the number of bytes occupied, +which includes both saved text and other data. + +In fact, this calls the function which is the value of +`undo-outer-limit-function' with one argument, the size. +The text above describes the behavior of the function +that variable usually specifies. */); + Vundo_outer_limit = make_number (300000); + + DEFVAR_LISP ("undo-outer-limit-function", &Vundo_outer_limit_function, + doc: /* Function to call when an undo list exceeds `undo-outer-limit'. +This function is called with one argument, the current undo list size +for the most recent command (since the last undo boundary). +If the function returns t, that means truncation has been fully handled. +If it returns nil, the other forms of truncation are done. + +Garbage collection is inhibited around the call to this function, +so it must make sure not to do a lot of consing. */); + Vundo_outer_limit_function = Qnil; } /* arch-tag: d546ee01-4aed-4ffb-bb8b-eefaae50d38a
--- a/src/xdisp.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/xdisp.c Sat Dec 25 02:00:25 2004 +0000 @@ -5050,6 +5050,21 @@ XSETINT (it->ctl_chars[1], g); ctl_len = 2; } + else if (it->c == 0x8a0 || it->c == 0x8ad) + { + /* Set IT->ctl_chars[0] to the glyph for `\\'. */ + if (it->dp + && INTEGERP (DISP_ESCAPE_GLYPH (it->dp)) + && GLYPH_CHAR_VALID_P (XINT (DISP_ESCAPE_GLYPH (it->dp)))) + g = XINT (DISP_ESCAPE_GLYPH (it->dp)); + else + g = FAST_MAKE_GLYPH ('\\', face_id); + XSETINT (it->ctl_chars[0], g); + + g = FAST_MAKE_GLYPH (it->c == 0x8ad ? '-' : ' ', face_id); + XSETINT (it->ctl_chars[1], g); + ctl_len = 2; + } else { unsigned char str[MAX_MULTIBYTE_LENGTH];
--- a/src/xselect.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/xselect.c Sat Dec 25 02:00:25 2004 +0000 @@ -2324,7 +2324,7 @@ Fcons (x_atom_to_symbol (display, type), Fcons (make_number (format), Qnil)))); - ret = (bytes ? make_string ((char *) data, bytes) : Qnil); + ret = (bytes ? make_unibyte_string ((char *) data, bytes) : Qnil); /* Use xfree, not XFree, because x_get_window_property calls xmalloc itself. */ xfree (data);
--- a/src/xterm.c Tue Dec 14 09:27:49 2004 +0000 +++ b/src/xterm.c Sat Dec 25 02:00:25 2004 +0000 @@ -4289,8 +4289,6 @@ int part = -1, whole = 0, portion = 0; GtkAdjustment *adj = GTK_ADJUSTMENT (gtk_range_get_adjustment (widget)); - if (xg_ignore_gtk_scrollbar) return; - position = gtk_adjustment_get_value (adj); p = g_object_get_data (G_OBJECT (widget), XG_LAST_SB_DATA); @@ -4304,6 +4302,8 @@ previous = *p; *p = position; + if (xg_ignore_gtk_scrollbar) return; + diff = (int) (position - previous); if (diff == (int) adj->step_increment) @@ -4335,7 +4335,7 @@ } if (part >= 0) - { + { window_being_scrolled = bar->window; last_scroll_bar_part = part; x_send_scroll_bar_event (bar->window, part, portion, whole);