Mercurial > emacs
changeset 109409:ff42e5c5f789
Merge from mainline.
| author | Katsumi Yamaoka <yamaoka@jpl.org> |
|---|---|
| date | Wed, 16 Jun 2010 22:49:55 +0000 |
| parents | 4eded71f4215 (current diff) d94083f6e4e9 (diff) |
| children | 8d7eaaac8fbe |
| files | lisp/vc/vc-annotate.el lisp/vc/vc-svn.el |
| diffstat | 28 files changed, 336 insertions(+), 255 deletions(-) [+] |
line wrap: on
line diff
--- a/ChangeLog Tue Jun 15 22:55:36 2010 +0000 +++ b/ChangeLog Wed Jun 16 22:49:55 2010 +0000 @@ -1,6 +1,15 @@ +2010-06-16 Chong Yidong <cyd@stupidchicken.com> + + * INSTALL: Update font information (Bug#6389). + +2010-06-16 Glenn Morris <rgm@gnu.org> + + * INSTALL: General update. + 2010-06-12 Glenn Morris <rgm@gnu.org> - * Makefile.in (install-arch-indep): Delete any old info .gz files first. + * Makefile.in (install-arch-indep): Delete any old info .gz files + first. 2010-06-11 Glenn Morris <rgm@gnu.org>
--- a/INSTALL Tue Jun 15 22:55:36 2010 +0000 +++ b/INSTALL Wed Jun 16 22:49:55 2010 +0000 @@ -5,32 +5,38 @@ See the end of the file for license conditions. -This file contains general information. For more specific information -for the Windows, GNUstep/Mac OS X, and MS-DOS ports, also see the files -nt/INSTALL nextstep/INSTALL, and msdos/INSTALL. For information -specific to building from a Bazaar checkout (rather than a release), see -the file INSTALL.BZR. +This file contains general information on building GNU Emacs. +For more information specific to the MS-Windows, GNUstep/Mac OS X, and +MS-DOS ports, also read the files nt/INSTALL, nextstep/INSTALL, and +msdos/INSTALL. For information about building from a Bazaar checkout +(rather than a release), also read the file INSTALL.BZR. BASIC INSTALLATION -The simplest way to build Emacs is to use the `configure' shell script -which attempts to guess correct values for various system-dependent -variables and features and find the directories where various system -headers and libraries are kept. It then creates a `Makefile' in each -subdirectory and a `config.h' file containing system-dependent -definitions. Running the `make' utility then builds the package for -your system. +On most Unix systems, you build Emacs by first running the `configure' +shell script. This attempts to deduce the correct values for +various system-dependent variables and features, and find the +directories where certain system headers and libraries are kept. +In a few cases, you may need to explicitly tell configure where to +find some things, or what options to use. + +`configure' creates a `Makefile' in several subdirectories, and a +`src/config.h' file containing system-dependent definitions. +Running the `make' utility then builds the package for your system. Here's the procedure to build Emacs using `configure' on systems which -are supported by it. If this simplified procedure fails, or if you -are using a platform such as MS-Windows, where `configure' script -doesn't work, you might need to use various non-default options, and -maybe perform some of the steps manually. The more detailed -description in the rest of the sections of this guide will help you do -that, so please refer to them if the simple procedure does not work. +are supported by it. In some cases, if the simplified procedure fails, +you might need to use various non-default options, and maybe perform +some of the steps manually. The more detailed description in the other +sections of this guide will help you do that, so please refer to those +sections if you need to. - 1. Make sure your system has at least 120 MB of free disk space. + 1. Unpacking the Emacs 23.2 release requires about 170 MB of free + disk space. Building Emacs uses about another 60 MB of space. + The final installed Emacs uses about 120 MB of disk space. + This includes the space-saving that comes from automatically + compressing the Lisp source files on installation. 2a. `cd' to the directory where you unpacked Emacs and invoke the `configure' script: @@ -43,8 +49,8 @@ SOURCE-DIR/configure - where SOURCE-DIR is the top-level Emacs source directory. This - may not work unless you use GNU make. + where SOURCE-DIR is the top-level Emacs source directory. + This may not work unless you use GNU make. 3. When `configure' finishes, it prints several lines of details about the system configuration. Read those details carefully @@ -52,17 +58,18 @@ system names, wrong places for headers or libraries, missing libraries that you know are installed on your system, etc. - If you find anything wrong, you will have to pass to `configure' - explicit machine configuration name, and one or more options - which tell it where to find various headers and libraries; refer - to DETAILED BUILDING AND INSTALLATION section below. + If you find anything wrong, you may have to pass to `configure' + one or more options specifying the explicit machine configuration + name, where to find various headers and libraries, etc. + Refer to the section DETAILED BUILDING AND INSTALLATION below. - If `configure' didn't find some image support libraries, such as - Xpm, jpeg, etc., and you want to use them refer to the subsection - "Image support libraries", below. + If `configure' didn't find some (optional) image support libraries, + such as Xpm, jpeg, etc., and you want to use them, refer to the + subsection "Image support libraries" below. If the details printed by `configure' don't make any sense to - you, assume that `configure' did its job and proceed. + you, but there are no obvious errors, assume that `configure' did + its job and proceed. 4. If you need to run the `configure' script more than once (e.g., with some non-default options), always clean the source @@ -79,7 +86,7 @@ in the `src' directory. You can try this program, to make sure it works: - src/emacs -q + src/emacs -Q 7. Assuming that the program `src/emacs' starts and displays its opening screen, you can install the program and its auxiliary @@ -93,9 +100,13 @@ make clean - You can also save some space by compressing (with `gzip') Info files - and installed Lisp source (.el) files which have corresponding .elc - versions. + You can delete the entire build directory if you do not plan to + build Emacs again, but it can be useful to keep for debugging. + + Note that the install automatically saves space by compressing + (provided you have the `gzip' program) those installed Lisp source (.el) + files that have corresponding .elc versions. You may also wish + to compress the installed Info files. ADDITIONAL DISTRIBUTION FILES @@ -157,19 +168,15 @@ running Emacs; however, note that Emacs will not be able to use colored icons in the toolbar if XPM support is not compiled in. -Here's the list of these optional libraries, and the URLs where they -can be found: +Here's the list of some of these optional libraries, and the URLs +where they can be found (in the unlikely event that your distribution +does not provide them): - . libXaw3d for fancy 3D-style - scroll bars: ftp://ftp.x.org/contrib/widgets/Xaw3d/ - . libxpm for XPM: ftp://ftp.x.org/contrib/libraries/ - Get version 3.4k or later, which lets Emacs - use its own color allocation functions. - . libpng for PNG: ftp://ftp.simplesystems.org/pub/libpng/png/ + . libXaw3d http://directory.fsf.org/project/xaw3d/ + . libxpm for XPM: http://www.x.org/releases/current/src/lib/ + . libpng for PNG: http://www.libpng.org/ . libz (for PNG): http://www.zlib.net/ - . libjpeg for JPEG: ftp://ftp.uu.net/graphics/jpeg/ - Get version 6b -- 6a is reported to fail in - Emacs. + . libjpeg for JPEG: http://www.ijg.org/ . libtiff for TIFF: http://www.libtiff.org/ . libgif for GIF: http://sourceforge.net/projects/giflib/ @@ -178,61 +185,38 @@ appropriate --without-LIB option. In some cases, older versions of these libraries won't work because some routines are missing, and configure should avoid such old versions. If that happens, use the ---without-LIB options to `configure'. See below for more details. +--without-LIB options to `configure', if you need to. * Extra fonts The Emacs distribution does not include fonts and does not install -them. You must do that yourself. - -Emacs running on the GNU system supports both X fonts and local fonts -(i.e. the fonts managed by the fontconfig library). - -For `Unicode' (ISO 10646) X fonts, see -<URL:http://czyborra.com/unifont/> (packaged in Debian), -<URL:http://openlab.ring.gr.jp/efont/> (packaged in Debian). (In -recent Debian versions, there is an extensive `misc-fixed' iso10646-1 -in the default X installation.) Perhaps also see -<URL:http://www.cl.cam.ac.uk/%7Emgk25/ucs-fonts.html>. - -<URL:http://czyborra.com/charsets/> has basic fonts for Emacs's -ISO-8859 charsets. +them. -XFree86 release 4 (from <URL:ftp://ftp.xfree86.org/pub/XFree86/> and mirrors) -contains font support for most, if not all, of the charsets that Emacs -currently supports, including iso10646-1 encoded fonts for use with -the mule-unicode charsets. The font files should also be usable with -older X releases. Note that XFree 4 contains many iso10646-1 fonts -with minimal character repertoires, which can cause problems -- see -etc/PROBLEMS. - -BDF Unicode fonts etl-unicode.tar.gz are available from -<URL:ftp://ftp.x.org/contrib/fonts/> and -<URL:ftp://ftp.xfree86.org/pub/mirror/X.Org/contrib/fonts/>. These -fonts can also be used by ps-print and ps-mule to print Unicode -characters. - -Finally, the Web page <URL:http://www.gnu.org/software/freefont/> -lists a large number of free Unicode fonts. +On the GNU system, Emacs supports both X fonts and local fonts +(i.e. fonts managed by the fontconfig library). If you need more +fonts than your distribution normally provides, you must install them +yourself. See <URL:http://www.gnu.org/software/freefont/> for a large +number of free Unicode fonts. * GNU/Linux development packages -Many GNU/Linux systems do not come with development packages by -default; they just include the files that you need to run Emacs, but -not those you need to compile it. For example, to compile Emacs with -X11 support, you may need to install the special `X11 development' -package. For example, in April 2003, the package names to install -were `XFree86-devel' and `Xaw3d-devel' on Red Hat. On Debian, the -packages necessary to build the installed version should be -sufficient; they can be installed using `apt-get build-dep emacs21' in -Debian 3 and above. +Many GNU/Linux systems do not come with development packages by default; +they include the files that you need to run Emacs, but not those you +need to compile it. For example, to compile Emacs with support for X +and graphics libraries, you may need to install the `X development' +package(s), and development versions of the jpeg, png, etc. packages. + +The names of the packages that you need varies according to the +GNU/Linux distribution that you use, and the options that you want to +configure Emacs with. On Debian-based systems, you can install all the +packages needed to build the installed version of Emacs with a command +like `apt-get build-dep emacs23'. DETAILED BUILDING AND INSTALLATION: -(This is for a Unix or Unix-like system. For MS-DOS and Windows 3.X, -see msdos/INSTALL. For Windows 9X, Windows ME, Windows NT, Windows -2000, Windows XP/2003, and Windows Vista/2008, see the file +(This is for a Unix or Unix-like system. For MS-DOS and MS Windows 3.X, +see msdos/INSTALL. For later versions of MS Windows, see the file nt/INSTALL. For GNUstep and Mac OS X, see nextstep/INSTALL.) 1) Make sure your system has enough swapping space allocated to handle @@ -240,21 +224,20 @@ least 2.8 MB and can reach 100 MB or more. If the swapping space is insufficient, you will get an error in the command `temacs -batch -l loadup dump', found in `./src/Makefile.in', or possibly when -running the final dumped Emacs. +running the final dumped Emacs. (This should not be an issue +on any recent system.) -Building Emacs requires about 140 MB of disk space (including the -Emacs sources) Once installed, Emacs occupies about 77 MB in the file +Building Emacs requires about 230 MB of disk space (including the +Emacs sources). Once installed, Emacs occupies about 120 MB in the file system where it is installed; this includes the executable files, Lisp libraries, miscellaneous data files, and on-line documentation. If the building and installation take place in different directories, -then the installation procedure momentarily requires 140+77 MB. +then the installation procedure momentarily requires 230+120 MB. -2) Consult `./etc/MACHINES' to see what configuration name you should -give to the `configure' program. That file offers hints for -getting around some possible installation problems. The file lists -many different configurations, but only the part for your machine and -operating system is relevant. (The list is arranged in alphabetical -order by the vendor name.) +2) In the unlikely event that `configure' does not detect your system +type correctly, consult `./etc/MACHINES' to see what --host, --build +options you should pass to `configure'. That file also offers hints +for getting around some possible installation problems. 3) You can build Emacs in the top-level Emacs source directory or in a separate directory. @@ -262,15 +245,10 @@ 3a) To build in the top-level Emacs source directory, go to that directory and run the program `configure' as follows: - ./configure [CONFIGURATION-NAME] [--OPTION[=VALUE]] ... - -The CONFIGURATION-NAME argument should be a configuration name given -in `./etc/MACHINES', with the system version number added at the end. + ./configure [--OPTION[=VALUE]] ... -You should try first omitting CONFIGURATION-NAME. This way, -`configure' will try to guess your system type. If it cannot guess, -or if something goes wrong in building or installing Emacs this way, -try again specifying the proper CONFIGURATION-NAME explicitly. +If `configure' cannot determine your system type, try again +specifying the proper --build, --host options explicitly. If you don't want X support, specify `--with-x=no'. If you omit this option, `configure' will try to figure out for itself whether your @@ -285,20 +263,19 @@ To get more attractive menus, you can specify an X toolkit when you configure Emacs; use the option `--with-x-toolkit=TOOLKIT', where -TOOLKIT is `athena', `motif' or `gtk' (`yes' and `lucid' are synonyms -for `athena'). On some systems, it does not work to use a toolkit -with shared libraries. A free implementation of Motif, called -LessTif, is available from <http://www.lesstif.org>. Compiling with -LessTif or Motif causes a standard File Selection Dialog to pop up -when you invoke file commands with the mouse. You can get fancy -3D-style scroll bars, even without LessTif/Motif, if you have the -Xaw3d library installed (see "Image support libraries" above for Xaw3d -availability). +TOOLKIT is `gtk' (the default), `athena', or `motif' (`yes' and +`lucid' are synonyms for `athena'). On some systems, it does not work +to use a toolkit with shared libraries. A free implementation of +Motif, called LessTif, is available from <http://www.lesstif.org>. +Compiling with LessTif or Motif causes a standard File Selection +Dialog to pop up when you invoke file commands with the mouse. You +can get fancy 3D-style scroll bars, even without Gtk or LessTif/Motif, +if you have the Xaw3d library installed (see "Image support libraries" +above for Xaw3d availability). -If `--with-x-toolkit=gtk' is specified, you can tell configure where -to search for GTK by specifying `--with-pkg-config-prog=PATH' where -PATH is the pathname to pkg-config. Note that GTK version 2.4 or -newer is required for Emacs. +You can tell configure where to search for GTK by specifying +`--with-pkg-config-prog=PATH' where PATH is the pathname to +pkg-config. Note that GTK version 2.6 or newer is required for Emacs. The Emacs mail reader RMAIL is configured to be able to read mail from a POP3 server by default. Versions of the POP protocol older than @@ -325,10 +302,10 @@ Use --without-toolkit-scroll-bars to disable LessTif/Motif or Xaw3d scroll bars. -Use --without-xim to inhibit the default use of X Input Methods. In -this case, the X resource useXIM can be used to turn on use of XIM. +Use --without-xim to inhibit the default use of X Input Methods. +In this case, the X resource useXIM can be used to turn on use of XIM. -Use --disable-largefile omits support for files larger than 2GB on +Use --disable-largefile to omit support for files larger than 2GB on systems which support that. Use --without-sound to disable sound support. @@ -338,11 +315,11 @@ - Emacs (and the other utilities users run) go in PREFIXDIR/bin (unless the `--exec-prefix' option says otherwise). - The architecture-independent files go in PREFIXDIR/share/emacs/VERSION - (where VERSION is the version number of Emacs, like `19.27'). + (where VERSION is the version number of Emacs, like `23.2'). - The architecture-dependent files go in PREFIXDIR/libexec/emacs/VERSION/CONFIGURATION - (where CONFIGURATION is the configuration name, like mips-dec-ultrix4.2), - unless the `--exec-prefix' option says otherwise. + (where CONFIGURATION is the configuration name, like + i686-pc-linux-gnu), unless the `--exec-prefix' option says otherwise. The `--exec-prefix=EXECDIR' option allows you to specify a separate portion of the directory tree for installing architecture-specific @@ -354,17 +331,16 @@ For example, the command - ./configure mips-dec-ultrix --with-x11 + ./configure --build=i386-linux-gnu --without-sound -configures Emacs to build for a DECstation running Ultrix, with -support for the X11 window system. +configures Emacs to build for a 32-bit GNU/Linux distribution, +without sound support. -`configure' doesn't do any compilation or installation -itself. It just creates the files that influence those things: -`./Makefile', `lib-src/Makefile', `oldXMenu/Makefile', -`lwlib/Makefile', `src/Makefile', and `./src/config.h'. For details -on exactly what it does, see the section called `CONFIGURATION BY -HAND', below. +`configure' doesn't do any compilation or installation itself. +It just creates the files that influence those things: +`./Makefile' in the top-level directory and several subdirectories; +and `./src/config.h'. For details on exactly what it does, see the +section called `CONFIGURATION BY HAND', below. When it is done, `configure' prints a description of what it did and creates a shell script `config.status' which, when run, recreates the @@ -406,7 +382,7 @@ preprocessor to look in the `/foo/myinclude' directory for header files (in addition to the standard directories), instruct the linker to look in `/bar/mylib' for libraries, pass the -O3 optimization -switch to the compiler, and link against libfoo.a and libbar.a +switch to the compiler, and link against libfoo and libbar libraries in addition to the standard ones. For some libraries, like Gtk+, fontconfig and ALSA, `configure' uses @@ -436,14 +412,9 @@ To build in a separate directory, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. -3c) Some people try to build in a separate directory by filling -it full of symlinks to the files in the real source directory. -If you do that, `make all' does work, but `make install' fails: -it copies the symbolic links rather than the actual files. - -As far as is known, there is no particular reason to use -a directory full of links rather than use the standard GNU -facilities to build in a separate directory (see 3b above). +(Do not try to build in a separate directory by creating many links +to the real source directory--there is no need, and installation will +fail.) 4) Look at `./lisp/paths.el'; if some of those values are not right for your system, set up the file `./lisp/site-init.el' with Emacs @@ -454,7 +425,7 @@ (setq news-inews-program "/usr/bin/inews") is how you would override the default value of the variable -news-inews-program (which is "/usr/local/inews"). +news-inews-program. Before you override a variable this way, *look at the value* that the variable gets by default! Make sure you know what kind of value the @@ -473,18 +444,11 @@ site-load.el, Emacs will use *precisely* that value when it starts up again. If you do this, you are on your own! -Note that, on some systems, the code you place in site-init.el must -not use expand-file-name or any other function which may look -something up in the system's password and user information database. -See `./etc/PROBLEMS' for more details on which systems this affects. - The `site-*.el' files are nonexistent in the distribution. You do not need to create them if you have nothing to put in them. 6) Refer to the file `./etc/TERMS' for information on fields you may -wish to add to various termcap entries. The files `./etc/termcap.ucb' -and `./etc/termcap.dat' may already contain appropriately-modified -entries. +wish to add to various termcap entries. (This is unlikely to be necessary.) 7) Run `make' in the top directory of the Emacs distribution to finish building Emacs in the standard way. The final executable file is @@ -498,11 +462,11 @@ `/usr/local/bin' holds the executable programs users normally run - `emacs', `etags', `ctags', `b2m', `emacsclient', - and `rcs-checkin'. + `grep-changelog', and `rcs-checkin'. `/usr/local/share/emacs/VERSION/lisp' holds the Emacs Lisp library; `VERSION' stands for the number of the Emacs version - you are installing, like `18.59' or `19.27'. Since the + you are installing, like `23.1' or `23.2'. Since the Lisp library changes from one version of Emacs to another, including the version number in the path allows you to have several versions of Emacs installed @@ -510,18 +474,17 @@ make Emacs unavailable while installing a new version. `/usr/local/share/emacs/VERSION/etc' holds the Emacs tutorial, the DOC - file, the `yow' database, and other - architecture-independent files Emacs might need while - running. VERSION is as specified for `.../lisp'. + file, and other architecture-independent files Emacs + might need while running. `/usr/local/libexec/emacs/VERSION/CONFIGURATION-NAME' contains executable programs used by Emacs that users are not expected to run themselves. `VERSION' is the number of the Emacs version you are - installing, and `CONFIGURATION-NAME' is the argument - you gave to the `configure' program to identify the + installing, and `CONFIGURATION-NAME' is the value + deduced by the `configure' program to identify the architecture and operating system of your machine, - like `mips-dec-ultrix' or `sparc-sun-sunos'. Since + like `i686-pc-linux-gnu' or `sparc-sun-sunos'. Since these files are specific to the version of Emacs, operating system, and architecture in use, including the configuration name in the path allows you to have @@ -533,10 +496,9 @@ `/usr/local/share/info' holds the on-line documentation for Emacs, known as "info files". Many other GNU programs are documented using info files as well, so this directory - stands apart from the other, Emacs-specific - directories. + stands apart from the other, Emacs-specific directories. -`/usr/local/man/man1' holds the man pages for the programs installed +`/usr/local/share/man/man1' holds the man pages for the programs installed in `/usr/local/bin'. Any version of Emacs, whether installed or not, also looks for Lisp @@ -599,10 +561,9 @@ defaults to /usr/local/share. We create the following subdirectories under `datadir': - `emacs/VERSION/lisp', containing the Emacs Lisp library, and - - `emacs/VERSION/etc', containing the Emacs tutorial, the DOC - file, and the `yow' database. + - `emacs/VERSION/etc', containing the tutorials, DOC file, etc. `VERSION' is the number of the Emacs version you are installing, - like `18.59' or `19.0'. Since these files vary from one version + like `23.1' or `23.2'. Since these files vary from one version of Emacs to another, including the version number in the path allows you to have several versions of Emacs installed at the same time; this means that you don't have to make Emacs @@ -615,29 +576,23 @@ programs used by Emacs that users are not expected to run themselves. `VERSION' is the number of the Emacs version you are installing, - and `CONFIGURATION-NAME' is the argument you gave to the + and `CONFIGURATION-NAME' is the value deduced by the `configure' program to identify the architecture and operating - system of your machine, like `mips-dec-ultrix' or - `sparc-sun-sunos'. Since these files are specific to the version - of Emacs, operating system, and architecture in use, including - the configuration name in the path allows you to have several - versions of Emacs for any mix of machines and operating systems - installed at the same time; this is useful for sites at which - different kinds of machines share the file system Emacs is - installed on. + system of your machine, like `i686-pc-linux-gnu' or `sparc-sun-sunos'. + Since these files are specific to the version of Emacs, + operating system, and architecture in use, including the + configuration name in the path allows you to have several + versions of Emacs for any mix of machines and operating + systems installed at the same time; this is useful for sites + at which different kinds of machines share the file system + Emacs is installed on. `infodir' indicates where to put the info files distributed with Emacs; it defaults to `/usr/local/share/info'. `mandir' indicates where to put the man pages for Emacs and its utilities (like `etags'); it defaults to - `/usr/local/man/man1'. - -`manext' gives the extension the man pages should be installed with. - It should contain a period, followed by the appropriate - digit. It defaults to `.1'. For example given the default - values for `mandir' and `manext', the Emacs man page would be - installed as `/usr/local/man/man1/emacs.1'. + `/usr/local/share/man/man1'. `prefix' doesn't give a path for any specific part of Emacs; instead, its value is used to determine the defaults for all the @@ -659,7 +614,7 @@ path variables - `bindir' and `libexecdir'. The above variables serve analogous purposes in the makefiles for all -GNU software; this variable is specific to Emacs. +GNU software; the following variable is specific to Emacs. `archlibdir' indicates where Emacs installs and expects the executable files and other architecture-dependent data it uses while @@ -675,7 +630,7 @@ directory, but be aware that running the `configure' program erases `Makefile' and rebuilds it from `Makefile.in'. -The path for finding Lisp files is specified in src/paths.h, +The path for finding Lisp files is specified in src/epaths.h, a file which is generated by running configure. To change the path, you can edit the definition of PATH_LOADSEARCH in that file before you run `make'. @@ -717,15 +672,15 @@ Once Emacs is configured, running `make' in the top directory performs the following steps. -1) Run `make src/paths.h' in the top directory. This produces -`./src/paths.h' from the template file `./src/paths.in', changing +1) Run `make epaths-force' in the top directory. This produces +`./src/epaths.h' from the template file `./src/epaths.in', changing the paths to the values specified in `./Makefile'. 2) Go to directory `./lib-src' and run `make'. This creates executables named `ctags' and `etags' and `make-docfile' and `digest-doc' and `test-distrib'. And others. -3) Go to directory `./src' and Run `make'. This refers to files in +3) Go to directory `./src' and run `make'. This refers to files in the `./lisp' and `./lib-src' subdirectories using names `../lisp' and `../lib-src'. @@ -737,8 +692,7 @@ current Emacs version. This file contains documentation strings for all the functions in Emacs. Each time you run make to make a new emacs, a new DOC file with a new name is made. You must keep the DOC -file for an Emacs version as long as you keep using that Emacs -version. +file for an Emacs version as long as you keep using that Emacs version. INSTALLATION BY HAND @@ -747,7 +701,7 @@ directory of the Emacs distribution. 1) Copy `./lisp' and its subdirectories, `./etc', and the executables -in `./lib-src' to their final destinations, as selected in `./src/paths.h'. +in `./lib-src' to their final destinations, as selected in `./src/epaths.h'. Strictly speaking, not all of the executables in `./lib-src' need be copied. - The programs `fakemail', `hexl', `movemail', `profile', `rcs2log', @@ -778,8 +732,7 @@ `rcs-checkin' from `./lib-src' to `/usr/local/bin'. These programs are intended for users to run. -5) Copy the man pages in `./etc' for emacs, ctags, and etags into the -appropriate man directories. +5) Copy the man pages in `./doc/man' into the appropriate man directory. 6) The files in the `./src' subdirectory, except for `emacs', are not used by Emacs once it is built. However, it is very desirable to keep @@ -788,8 +741,8 @@ PROBLEMS -See the file PROBLEMS in etc subdirectory for a list of various -problems sometimes encountered, and what to do about them. +See the file `./etc/PROBLEMS' for a list of various problems sometimes +encountered, and what to do about them. This file is part of GNU Emacs.
--- a/doc/emacs/ChangeLog Tue Jun 15 22:55:36 2010 +0000 +++ b/doc/emacs/ChangeLog Wed Jun 16 22:49:55 2010 +0000 @@ -1,3 +1,9 @@ +2010-06-10 Glenn Morris <rgm@gnu.org> + + * basic.texi (Inserting Text): Minor clarification. (Bug#6374) + + * basic.texi (Inserting Text): Fix typo. + 2010-06-10 Glenn Morris <rgm@gnu.org> * ack.texi (Acknowledgments):
--- a/doc/emacs/basic.texi Tue Jun 15 22:55:36 2010 +0000 +++ b/doc/emacs/basic.texi Wed Jun 16 22:49:55 2010 +0000 @@ -1,6 +1,7 @@ @c This is part of the Emacs manual. @c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2000, 2001, -@c 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. +@c 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 +@c Free Software Foundation, Inc. @c See file emacs.texi for copying conditions. @node Basic, Minibuffer, Exiting, Top @chapter Basic Editing Commands @@ -92,9 +93,9 @@ @vindex read-quoted-char-radix @noindent To use decimal or hexadecimal instead of octal, set the variable -@code{read-quoted-char-radix} to 10 or 16. If the radix is greater -than 10, some letters starting with @kbd{a} serve as part of a -character code, just like digits. +@code{read-quoted-char-radix} to 10 or 16. If the radix is 16, +the letters @kbd{a} to @kbd{f} serve as part of a character code, +just like digits. Case is ignored. A numeric argument tells @kbd{C-q} how many copies of the quoted character to insert (@pxref{Arguments}). @@ -104,7 +105,7 @@ @cindex Unicode Instead of @kbd{C-q}, you can use @kbd{C-x 8 @key{RET}} (@code{ucs-insert}) to insert a character based on its Unicode name or -code-point. This commands prompts for a character to insert, using +code-point. This command prompts for a character to insert, using the minibuffer; you can specify the character using either (i) the character's name in the Unicode standard, or (ii) the character's code-point in the Unicode standard. If you specify the character's
--- a/doc/misc/ChangeLog Tue Jun 15 22:55:36 2010 +0000 +++ b/doc/misc/ChangeLog Wed Jun 16 22:49:55 2010 +0000 @@ -1,3 +1,8 @@ +2010-06-10 Glenn Morris <rgm@gnu.org> + + * idlwave.texi (Load-Path Shadows): + * org.texi (Handling links): Fix typos. + 2010-06-07 Teodor Zlatanov <tzz@lifelogs.com> * gnus.texi (Interactive): Explain effect of gnus-expert-user better.
--- a/doc/misc/idlwave.texi Tue Jun 15 22:55:36 2010 +0000 +++ b/doc/misc/idlwave.texi Wed Jun 16 22:49:55 2010 +0000 @@ -3717,7 +3717,7 @@ @table @asis @item @kbd{M-x idlwave-list-buffer-load-path-shadows} -This commands checks the names of all routines defined in the current +This command checks the names of all routines defined in the current buffer for shadowing conflicts with other routines accessible to IDLWAVE. The command also has a key binding: @kbd{C-c C-b} @item @kbd{M-x idlwave-list-shell-load-path-shadows}.
--- a/doc/misc/org.texi Tue Jun 15 22:55:36 2010 +0000 +++ b/doc/misc/org.texi Wed Jun 16 22:49:55 2010 +0000 @@ -2978,7 +2978,7 @@ Open link at point. This will launch a web browser for URLs (using @command{browse-url-at-point}), run VM/MH-E/Wanderlust/Rmail/Gnus/BBDB for the corresponding links, and execute the command in a shell link. When the -cursor is on an internal link, this commands runs the corresponding search. +cursor is on an internal link, this command runs the corresponding search. When the cursor is on a TAG list in a headline, it creates the corresponding TAGS view. If the cursor is on a timestamp, it compiles the agenda for that date. Furthermore, it will visit text and remote files in @samp{file:} links
--- a/etc/ChangeLog Tue Jun 15 22:55:36 2010 +0000 +++ b/etc/ChangeLog Wed Jun 16 22:49:55 2010 +0000 @@ -1,3 +1,7 @@ +2010-06-12 Glenn Morris <rgm@gnu.org> + + * tutorials/TUTORIAL.bg, tutorials/TUTORIAL.es: Fix typos. + 2010-06-09 Michael Albinus <michael.albinus@gmx.de> * NEWS: Add notifications.el.
--- a/etc/NEWS Tue Jun 15 22:55:36 2010 +0000 +++ b/etc/NEWS Wed Jun 16 22:49:55 2010 +0000 @@ -257,7 +257,11 @@ * Incompatible Lisp Changes in Emacs 24.1 +** A backquote not followed by a space is now always treated as new-style. + ** Test for special mode-class was moved from view-file to view-buffer. +FIXME: This only says what was changed, but not what are the +programmer-visible consequences. ** Passing a nil argument to a minor mode function now turns the mode ON unconditionally.
--- a/etc/NEWS.1-17 Tue Jun 15 22:55:36 2010 +0000 +++ b/etc/NEWS.1-17 Wed Jun 16 22:49:55 2010 +0000 @@ -760,7 +760,7 @@ * New function `switch-to-buffer-other-window'. This is the new primitive to select a specified buffer (the -argument) in another window. It is not quite the same as +argument) in another window. It is not quite the same as `pop-to-buffer', because it is guaranteed to create another window (assuming there is room on the screen) so that it can leave the current window's old buffer displayed as well. @@ -971,7 +971,7 @@ This command creates an inferior Lisp process whose input and output appear in the Emacs buffer named `*lisp*'. That buffer uses a major mode called inferior-lisp-mode, which has many of the commands of lisp-mode -and those of shell-mode. Calls the value of shell-mode-hook and +and those of shell-mode. Calls the value of shell-mode-hook and lisp-mode-hook, in that order, if non-nil. Meanwhile, in lisp-mode, the command C-M-x is defined to @@ -1421,7 +1421,7 @@ of the executing emacs, for use in run-time conditionalization. The function featurep of one argument may be used to test for the - presence of a feature. It is just the same as + presence of a feature. It is just the same as (not (null (memq FEATURE features))) where FEATURE is its argument. For example, (if (featurep 'magic-window-hack) (transmogrify-window 'vertical) @@ -1541,13 +1541,13 @@ This function returns a cons cell whose car is the object produced by reading from the string and whose cdr is a number giving the - index in the string of the first character not read. That index may + index in the string of the first character not read. That index may be passed as the second argument to a later call to read-from-string to read the next form represented by the string. In addition, the function read now accepts a string as its argument. In this case, it calls read-from-string on the whole string, and - returns the car of the result. (ie the actual object read.) + returns the car of the result (ie the actual object read.)
--- a/etc/NEWS.23 Tue Jun 15 22:55:36 2010 +0000 +++ b/etc/NEWS.23 Wed Jun 16 22:49:55 2010 +0000 @@ -27,6 +27,10 @@ * Changes in Specialized Modes and Packages in Emacs 23.3 +--- +** The appt-add command takes an optional argument for the warning time. +This can be used in place of the default appt-message-warning-time. + * New Modes and Packages in Emacs 23.3
--- a/etc/tutorials/TUTORIAL.bg Tue Jun 15 22:55:36 2010 +0000 +++ b/etc/tutorials/TUTORIAL.bg Wed Jun 16 22:49:55 2010 +0000 @@ -625,7 +625,7 @@ Емакс сесията. >> Въведете C-x b *Messages* <Return>, за да видите буфера със - съобщенията. След това въведете C-x C-b TUTORIAL <Return>, за да + съобщенията. След това въведете C-x b TUTORIAL <Return>, за да се върнете към това въведение. Ако направите промени в текста на един файл и тогава намерите друг
--- a/etc/tutorials/TUTORIAL.es Tue Jun 15 22:55:36 2010 +0000 +++ b/etc/tutorials/TUTORIAL.es Wed Jun 16 22:49:55 2010 +0000 @@ -630,7 +630,7 @@ su sesiуn de Emacs. >> Teclee C-x b *Messages* <Return> para ver el buffer de mensajes. - Luego teclee C-b TUTORIAL <Return> para regresar a este tutorial. + Luego teclee C-x b TUTORIAL <Return> para regresar a este tutorial. Si hace cambios al texto de un archivo, y luego encuentra otro archivo, esto no guarda el primer archivo. Sus cambios permanecerбn
--- a/lisp/ChangeLog Tue Jun 15 22:55:36 2010 +0000 +++ b/lisp/ChangeLog Wed Jun 16 22:49:55 2010 +0000 @@ -1,3 +1,54 @@ +2010-06-16 Juri Linkov <juri@jurta.org> + + * facemenu.el (list-colors-display): Call `pop-to-buffer' before + `list-colors-print'. (Bug#6332) + +2010-06-16 Stefan Monnier <monnier@iro.umontreal.ca> + + * emacs-lisp/macroexp.el (macroexpand-all-1): Don't handle `lambda' + specially, since it's a macro. Fix up wrong hint passed to maybe-cons. + + * font-lock.el (font-lock-major-mode): Rename from + font-lock-mode-major-mode to distinguish it from + global-font-lock-mode's own font-lock-mode-major-mode (bug#6135). + (font-lock-set-defaults): + * font-core.el (font-lock-default-function): Adjust users. + (font-lock-mode): Don't set it at all. + +2010-06-16 Stefan Monnier <monnier@iro.umontreal.ca> + + * vc-annotate.el (vc-annotate): Use vc-read-revision. + +2010-06-16 Glenn Morris <rgm@gnu.org> + + * calendar/appt.el (appt-time-msg-list): Doc fix. + (appt-check): Let-bind appt-warn-time. + (appt-add): Make the 3rd argument optional. + Simplify argument names. Doc fix. Check for integer WARNTIME. + Only add WARNTIME to the output list if non-nil. + +2010-06-16 Ivan Kanis <apple@kanis.eu> + + * calendar/appt.el (appt-check): Let the 3rd element of + appt-time-msg-list specify the warning time. + (appt-add): Add new argument with the warning time. (Bug#5176) + +2010-06-16 Bob Rogers <rogers-emacs@rgrjr.dyndns.org> (tiny change) + + * vc-svn.el (vc-svn-after-dir-status): Fix regexp for Subversions + older than version 1.6. (Bug#6361) + +2010-06-16 Helmut Eller <eller.helmut@gmail.com> + + * emacs-lisp/cl-macs.el (destructuring-bind): Bind `bind-enquote', + used by cl-do-arglist. (Bug#6408) + +2010-06-16 AgustГn MartГn <agustin.martin@hispalinux.es> + + * ispell.el (ispell-dictionary-base-alist): Fix + portuguese casechars/not-casechars for missing 'çÇ'. + Suggested by Rolando Pereira (bug#6434). + 2010-06-15 Juanma Barranquero <lekktu@gmail.com> * facemenu.el (list-colors-sort): Doc fix.
--- a/lisp/calendar/appt.el Tue Jun 15 22:55:36 2010 +0000 +++ b/lisp/calendar/appt.el Wed Jun 16 22:49:55 2010 +0000 @@ -183,16 +183,25 @@ (defconst appt-buffer-name "*appt-buf*" "Name of the appointments buffer.") +;; TODO Turn this into an alist? It would be easier to add more +;; optional elements. +;; TODO There should be a way to set WARNTIME (and other properties) +;; from the diary-file. Implementing that would be a good reason +;; to change this to an alist. (defvar appt-time-msg-list nil "The list of appointments for today. Use `appt-add' and `appt-delete' to add and delete appointments. The original list is generated from today's `diary-entries-list', and can be regenerated using the function `appt-check'. -Each element of the generated list has the form (MINUTES STRING [FLAG]); where -MINUTES is the time in minutes of the appointment after midnight, and -STRING is the description of the appointment. -FLAG, if non-nil, says that the element was made with `appt-add' -so calling `appt-make-list' again should preserve it.") +Each element of the generated list has the form +\(MINUTES STRING [FLAG] [WARNTIME]) +where MINUTES is the time in minutes of the appointment after midnight, +and STRING is the description of the appointment. +FLAG and WARNTIME can only be present if the element was made +with `appt-add'. A non-nil FLAG indicates that the element was made +with `appt-add', so calling `appt-make-list' again should preserve it. +If WARNTIME is non-nil, it is an integer to use in place +of `appt-message-warning-time'.") (defconst appt-max-time (1- (* 24 60)) "11:59pm in minutes - number of minutes in a day minus 1.") @@ -313,7 +322,7 @@ (zerop (mod prev-appt-display-count appt-display-interval)))) ;; Non-nil means only update the interval displayed in the mode line. (mode-line-only (unless full-check appt-now-displayed)) - now cur-comp-time appt-comp-time) + now cur-comp-time appt-comp-time appt-warn-time) (when (or full-check mode-line-only) (save-excursion ;; Convert current time to minutes after midnight (12.01am = 1). @@ -353,6 +362,8 @@ ;; calculate the number of minutes until the appointment. (when (and appt-issue-message appt-time-msg-list) (setq appt-comp-time (caar (car appt-time-msg-list)) + appt-warn-time (or (nth 3 (car appt-time-msg-list)) + appt-message-warning-time) min-to-app (- appt-comp-time cur-comp-time)) (while (and appt-time-msg-list (< appt-comp-time cur-comp-time)) @@ -360,21 +371,21 @@ (if appt-time-msg-list (setq appt-comp-time (caar (car appt-time-msg-list))))) ;; If we have an appointment between midnight and - ;; `appt-message-warning-time' minutes after midnight, we + ;; `appt-warn-time' minutes after midnight, we ;; must begin to issue a message before midnight. Midnight ;; is considered 0 minutes and 11:59pm is 1439 ;; minutes. Therefore we must recalculate the minutes to ;; appointment variable. It is equal to the number of ;; minutes before midnight plus the number of minutes after ;; midnight our appointment is. - (if (and (< appt-comp-time appt-message-warning-time) - (> (+ cur-comp-time appt-message-warning-time) + (if (and (< appt-comp-time appt-warn-time) + (> (+ cur-comp-time appt-warn-time) appt-max-time)) (setq min-to-app (+ (- (1+ appt-max-time) cur-comp-time) appt-comp-time))) ;; Issue warning if the appointment time is within ;; appt-message-warning time. - (when (and (<= min-to-app appt-message-warning-time) + (when (and (<= min-to-app appt-warn-time) (>= min-to-app 0)) (setq appt-now-displayed t appt-display-count (1+ prev-appt-display-count)) @@ -470,14 +481,28 @@ "[0-9]?[0-9]\\(h\\([0-9][0-9]\\)?\\|[:.][0-9][0-9]\\)\\(am\\|pm\\)?") ;;;###autoload -(defun appt-add (new-appt-time new-appt-msg) - "Add an appointment for today at NEW-APPT-TIME with message NEW-APPT-MSG. -The time should be in either 24 hour format or am/pm format." - (interactive "sTime (hh:mm[am/pm]): \nsMessage: ") - (unless (string-match appt-time-regexp new-appt-time) +(defun appt-add (time msg &optional warntime) + "Add an appointment for today at TIME with message MSG. +The time should be in either 24 hour format or am/pm format. +Optional argument WARNTIME is an integer (or string) giving the number +of minutes before the appointment at which to start warning. +The default is `appt-message-warning-time'." + (interactive "sTime (hh:mm[am/pm]): \nsMessage: +sMinutes before the appointment to start warning: ") + (unless (string-match appt-time-regexp time) (error "Unacceptable time-string")) - (let ((time-msg (list (list (appt-convert-time new-appt-time)) - (concat new-appt-time " " new-appt-msg) t))) + (and (stringp warntime) + (setq warntime (unless (string-equal warntime "") + (string-to-number warntime)))) + (and warntime + (not (integerp warntime)) + (error "Argument WARNTIME must be an integer, or nil")) + (let ((time-msg (list (list (appt-convert-time time)) + (concat time " " msg) t))) + ;; It is presently non-sensical to have multiple warnings about + ;; the same appointment with just different delays, but it might + ;; not always be so. TODO + (if warntime (setq time-msg (append time-msg (list warntime)))) (unless (member time-msg appt-time-msg-list) (setq appt-time-msg-list (appt-sort-list (nconc appt-time-msg-list (list time-msg)))))))
--- a/lisp/emacs-lisp/cl-loaddefs.el Tue Jun 15 22:55:36 2010 +0000 +++ b/lisp/emacs-lisp/cl-loaddefs.el Wed Jun 16 22:49:55 2010 +0000 @@ -282,7 +282,7 @@ ;;;;;; flet progv psetq do-all-symbols do-symbols dotimes dolist ;;;;;; do* do loop return-from return block etypecase typecase ecase ;;;;;; case load-time-value eval-when destructuring-bind function* -;;;;;; defmacro* defun* gentemp gensym) "cl-macs" "cl-macs.el" "fbeedbf769c72fee9b4e0671957c1077") +;;;;;; defmacro* defun* gentemp gensym) "cl-macs" "cl-macs.el" "36cafd5054969b5bb0b1ce6a21605fed") ;;; Generated autoloads from cl-macs.el (autoload 'gensym "cl-macs" "\
--- a/lisp/emacs-lisp/cl-macs.el Tue Jun 15 22:55:36 2010 +0000 +++ b/lisp/emacs-lisp/cl-macs.el Wed Jun 16 22:49:55 2010 +0000 @@ -438,7 +438,7 @@ ;;;###autoload (defmacro destructuring-bind (args expr &rest body) (let* ((bind-lets nil) (bind-forms nil) (bind-inits nil) - (bind-defs nil) (bind-block 'cl-none)) + (bind-defs nil) (bind-block 'cl-none) (bind-enquote nil)) (cl-do-arglist (or args '(&aux)) expr) (append '(progn) bind-inits (list (nconc (list 'let* (nreverse bind-lets))
--- a/lisp/emacs-lisp/macroexp.el Tue Jun 15 22:55:36 2010 +0000 +++ b/lisp/emacs-lisp/macroexp.el Wed Jun 16 22:49:55 2010 +0000 @@ -134,7 +134,7 @@ (maybe-cons fun (maybe-cons (macroexpand-all-forms (cadr form) 2) nil - (cadr form)) + (cdr form)) form) form)) ((memq fun '(let let*)) @@ -145,11 +145,6 @@ form)) ((eq fun 'quote) form) - ((and (consp fun) (eq (car fun) 'lambda)) - ;; embedded lambda - (maybe-cons (macroexpand-all-forms fun 2) - (macroexpand-all-forms (cdr form)) - form)) ;; The following few cases are for normal function calls that ;; are known to funcall one of their arguments. The byte ;; compiler has traditionally handled these functions specially
--- a/lisp/facemenu.el Tue Jun 15 22:55:36 2010 +0000 +++ b/lisp/facemenu.el Wed Jun 16 22:49:55 2010 +0000 @@ -600,9 +600,11 @@ (with-current-buffer buf (erase-buffer) (setq truncate-lines t) + ;; Display buffer before generating content to allow + ;; `list-colors-print' to get the right window-width. + (pop-to-buffer buf) (list-colors-print list callback) - (set-buffer-modified-p nil)) - (pop-to-buffer buf)) + (set-buffer-modified-p nil))) (if callback (message "Click on a color to select it.")))
--- a/lisp/font-core.el Tue Jun 15 22:55:36 2010 +0000 +++ b/lisp/font-core.el Wed Jun 16 22:49:55 2010 +0000 @@ -97,7 +97,7 @@ `font-lock-mode'.") ;; The mode for which font-lock was initialized, or nil if none. -(defvar font-lock-mode-major-mode) +(defvar font-lock-major-mode) (define-minor-mode font-lock-mode "Toggle Font Lock mode. With arg, turn Font Lock mode off if and only if arg is a non-positive @@ -159,9 +159,7 @@ ;; Arrange to unfontify this buffer if we change major mode later. (if font-lock-mode (add-hook 'change-major-mode-hook 'font-lock-change-mode nil t) - (remove-hook 'change-major-mode-hook 'font-lock-change-mode t)) - (when font-lock-mode - (setq font-lock-mode-major-mode major-mode))) + (remove-hook 'change-major-mode-hook 'font-lock-change-mode t))) ;; Get rid of fontification for the old major mode. ;; We do this when changing major modes. @@ -213,8 +211,8 @@ (and mode (boundp 'font-lock-set-defaults) font-lock-set-defaults - font-lock-mode-major-mode - (not (eq font-lock-mode-major-mode major-mode)))) + font-lock-major-mode + (not (eq font-lock-major-mode major-mode)))) (font-lock-mode-internal mode))) (defun turn-on-font-lock ()
--- a/lisp/font-lock.el Tue Jun 15 22:55:36 2010 +0000 +++ b/lisp/font-lock.el Wed Jun 16 22:49:55 2010 +0000 @@ -1783,15 +1783,18 @@ (kill-local-variable 'font-lock-set-defaults) (font-lock-mode 1)) -(defvar font-lock-mode-major-mode) +(defvar font-lock-major-mode nil + "Major mode for which the font-lock settings have been setup.") +(make-variable-buffer-local 'font-lock-major-mode) + (defun font-lock-set-defaults () "Set fontification defaults appropriately for this mode. Sets various variables using `font-lock-defaults' (or, if nil, using `font-lock-defaults-alist') and `font-lock-maximum-decoration'." ;; Set fontification defaults if not previously set for correct major mode. (unless (and font-lock-set-defaults - (eq font-lock-mode-major-mode major-mode)) - (setq font-lock-mode-major-mode major-mode) + (eq font-lock-major-mode major-mode)) + (setq font-lock-major-mode major-mode) (set (make-local-variable 'font-lock-set-defaults) t) (make-local-variable 'font-lock-fontified) (make-local-variable 'font-lock-multiline)
--- a/lisp/textmodes/ispell.el Tue Jun 15 22:55:36 2010 +0000 +++ b/lisp/textmodes/ispell.el Wed Jun 16 22:49:55 2010 +0000 @@ -660,8 +660,8 @@ "[^A-Za-z\241\243\246\254\257\261\263\266\274\277\306\312\321\323\346\352\361\363]" "[.]" nil nil nil iso-8859-2) ("portugues" ; Portuguese mode - "[a-zA-Z\301\302\311\323\340\341\342\351\352\355\363\343\372]" - "[^a-zA-Z\301\302\311\323\340\341\342\351\352\355\363\343\372]" + "[a-zA-Z\301\302\307\311\323\340\341\342\351\352\355\363\343\347\372]" + "[^a-zA-Z\301\302\307\311\323\340\341\342\351\352\355\363\343\347\372]" "[']" t ("-C") "~latin1" iso-8859-1) ("russian" ; Russian.aff (KOI8-R charset) "[\341\342\367\347\344\345\263\366\372\351\352\353\354\355\356\357\360\362\363\364\365\346\350\343\376\373\375\370\371\377\374\340\361\301\302\327\307\304\305\243\326\332\311\312\313\314\315\316\317\320\322\323\324\325\306\310\303\336\333\335\330\331\337\334\300\321]"
--- a/lisp/url/ChangeLog Tue Jun 15 22:55:36 2010 +0000 +++ b/lisp/url/ChangeLog Wed Jun 16 22:49:55 2010 +0000 @@ -1,3 +1,7 @@ +2010-06-12 Е tД›pГЎn NД›mec <stepnem@gmail.com> (tiny change) + + * url-vars.el (url-privacy-level): Fix doc typo. (Bug#6406) + 2010-05-19 Stefan Monnier <monnier@iro.umontreal.ca> * url-util.el (url-unhex-string): Don't accidentally decode as latin-1.
--- a/lisp/url/url-vars.el Tue Jun 15 22:55:36 2010 +0000 +++ b/lisp/url/url-vars.el Wed Jun 16 22:49:55 2010 +0000 @@ -128,7 +128,7 @@ os -- the operating system info lastloc -- the last location agent -- do not send the User-Agent string -cookie -- never accept HTTP cookies +cookies -- never accept HTTP cookies Samples:
--- a/lisp/vc/vc-annotate.el Tue Jun 15 22:55:36 2010 +0000 +++ b/lisp/vc/vc-annotate.el Wed Jun 16 22:49:55 2010 +0000 @@ -316,7 +316,7 @@ ;;;###autoload (defun vc-annotate (file rev &optional display-mode buf move-point-to) - "Display the edit history of the current file using colors. + "Display the edit history of the current FILE using colors. This command creates a buffer that shows, for each line of the current file, when it was last edited and by whom. Additionally, colors are @@ -326,7 +326,7 @@ everything that is older than that is shown in blue. With a prefix argument, this command asks two questions in the -minibuffer. First, you may enter a revision number; then the buffer +minibuffer. First, you may enter a revision number REV; then the buffer displays and annotates that revision instead of the working revision \(type RET in the minibuffer to leave that default unchanged). Then, you are prompted for the time span in days which the color range @@ -348,9 +348,9 @@ (list buffer-file-name (let ((def (vc-working-revision buffer-file-name))) (if (null current-prefix-arg) def - (read-string + (vc-read-revision (format "Annotate from revision (default %s): " def) - nil nil def))) + (list buffer-file-name) nil def))) (if (null current-prefix-arg) vc-annotate-display-mode (float (string-to-number
--- a/lisp/vc/vc-svn.el Tue Jun 15 22:55:36 2010 +0000 +++ b/lisp/vc/vc-svn.el Wed Jun 16 22:49:55 2010 +0000 @@ -170,7 +170,7 @@ (?? . unregistered) ;; This is what vc-svn-parse-status does. (?~ . edited))) - (re (if remote "^\\(.\\)...... \\([ *]\\) +\\(?:[-0-9]+\\)? \\(.*\\)$" + (re (if remote "^\\(.\\)......? \\([ *]\\) +\\(?:[-0-9]+\\)? \\(.*\\)$" ;; Subexp 2 is a dummy in this case, so the numbers match. "^\\(.\\)....\\(.\\) \\(.*\\)$")) result)
--- a/src/ChangeLog Tue Jun 15 22:55:36 2010 +0000 +++ b/src/ChangeLog Wed Jun 16 22:49:55 2010 +0000 @@ -1,3 +1,11 @@ +2010-06-16 Glenn Morris <rgm@gnu.org> + + * editfns.c (Fbyte_to_string): Pacify compiler. + +2010-06-16 Stefan Monnier <monnier@iro.umontreal.ca> + + * lread.c (read1): Phase out old-style backquotes a bit more. + 2010-06-12 Eli Zaretskii <eliz@gnu.org> * makefile.w32-in ($(BLD)/bidi.$(O)): Depend on biditype.h and @@ -7,8 +15,7 @@ * bidi.c (bidi_initialize): Remove explicit initialization of bidi_type_table; include biditype.h instead. Don't support - entries whose second codepoint is zero. Initialize - bidi_mirror_table. + entries whose second codepoint is zero. Initialize bidi_mirror_table. (bidi_mirror_char): Use bidi_mirror_table. * biditype.h: New file.
--- a/src/lread.c Tue Jun 15 22:55:36 2010 +0000 +++ b/src/lread.c Wed Jun 16 22:49:55 2010 +0000 @@ -2683,7 +2683,17 @@ } case '`': - if (first_in_list) + /* Transition from old-style to new-style: + If we see "(`" it used to mean old-style, which usually works + fine because ` should almost never appear in such a position + for new-style. But occasionally we need "(`" to mean new + style, so we try to distinguish the two by the fact that we + can either write "( `foo" or "(` foo", where the first + intends to use new-style whereas the second intends to use + old-style. For Emacs-25, we should completely remove this + first_in_list exception (old-style can still be obtained via + "(\`" anyway). */ + if (first_in_list && (c = READCHAR, UNREAD (c), c == ' ')) { Vold_style_backquotes = Qt; goto default_label;