annotate cWnn/manual.en/chap5 @ 29:35bc1f2e3f14 default tip

minor fix

			*************************************************
			*	Chapter 5	ENVIRONMENT SETUP	*
			*************************************************




   5.1  OVERVIEW    
   =============

	All the user environment and operating environment in cWnn are defined in the 
system environment files.  The setup of environment includes the following :

 1. cserverrc      --	The initialization file for the server.
 2. uumrc 	   --	The initialization files for the front-end processor uum.
 3. wnnenvrc 	   --  	The environment setup files for conversions
 4. wnnenvrc_R	   -- 	The environment setup files for reverse conversions.
 5. uumkey   	   -- 	The keyboard layout definition file for the front-end client.
 6. cvt_key_tbl    -- 	The file which defines the keyboard input conversion. 

 



























					- 5-1 -

   5.2  cserverrc - THE INITIALIZATION FILE OF THE SERVER   
   ======================================================
   
 * Description 
	cserverrc  -  Server initialization file

 * Standard path 
	/usr/local/lib/wnn/zh_CN/cserverrc

 * Function 
	During  the  startup  of cserver,  cserverrc is read  as well as  all the files 
	defined in cserverrc (dictionaries and grammar files).

 * Definition 
  	1. Dictionaries that are read during the startup of cserver
  	   - Format
	     readfile  <wnn_file> 
	     Read in wnn_file.  All dictionaries and grammar files (refer Chapter 7 for 
	     details)  are  read  in  during  cserver  startup  and maintained until the 
	     termination of cserver.

  	2. Maximum client allowed
  	   - Format
	     max_client  n
	     This is  the  maximum  number  of  clients (users) that  are allowed  to be 
	     connected at any one time.  Default value is 32.

  	3. Maximum environment
  	   - Format
	     max_sticky_env  n
	     This is the maximum number of permanent environment allowed.  
	     A permanent  environment remains in the server after the termination of the 
	     front-end uum. This helps in  reducing the startup time of each client and 
	     repeated operations.  Default value is 10.

  	4. Path of dictionaries that are maintained by the server.
  	   - Format
	     jserverdir  <path>
	     This defines the path of dictionaries maintained by the server.
	     Usage frequency files and dictionaries of the user are also maintained here. 
	     The default path is "/usr/local/lib/wnn/zh_CN/".







					- 5-2 -
  	5. The default parameters for Pinyin-Hanzi conversions. 
  	   - Format 
	     def_param  <parameter 0>   <parameter 1>   <parameter 2>  
			<parameter 3>   <parameter 4>   <parameter 5>  
			<parameter 6>   <parameter 7>   <parameter 8> 
			<parameter 9>   <parameter 10>  <parameter 11>  
	     		<parameter 12>  <parameter 13>  <parameter 14>  
			<parameter 15>  <parameter 16> 

	     All parameters are integers. 
	     During  conversion, server will perform the conversion evaluation based on 
	     these parameter values. 

		   <parameter 0>  : number of phrase "n" to be assesed
		   <parameter 1>  : number of words "m" in phrase
		   <parameter 2>  : usage frequency weight
		   <parameter 3>  : word length weight 
		   <parameter 4>  : tone correctness weight
		   <parameter 5>  : last used weight
		   <parameter 6>  : dictionary priority weight
		   <parameter 7>  : average word assessment value weight
		   <parameter 8>  : phrase length weight
		   <parameter 9>  : number of words in phrase weight
		   <parameter 10> : usage frequency of numerals
		   <parameter 11> : usage frequency of alphabets
		   <parameter 12> : usage frequency of symbols
		   <parameter 13> : usage frequency of open parentheses
		   <parameter 14> : usage frequency of close parentheses
		   <parameter 15> : not used
		   <parameter 16> : not used

	     The following are the default values : 
	     1  3  5  50  10  20  10  40  1200  200  0  0  0  0  0  0  0


	6. Definition or Xuni (quasi) grammatical category for alphabets 
	   - Format
	     set_giji_ascii <char>
	     Alphabets, numerals and some defined characters can be classified as Xuni 
	     type in the Pinyin-Hanzi conversions and vice versa.
	     <char> can be  represented  in hexadecimal,  decimal, octal  as  well  as 
	     enclosed between single quotations.
	     






					- 5-3 -

   5.3  uumrc - THE INITIALIZATION FILE OF THE CLIENT (uum)   
   ==========================================================
  
 * Description 
	uumrc  -  Client (cuum) initialization file.

 * Standard paths
	/usr/local/lib/wnn/zh_CN/uumrc 

 * Function 
	Initialization file for the startup of the client. 
  	- Set the path of  each of the environment setup files, the keyboard layout file 
	  etc.
  	- Set the initial state after startup of client.
  	- Set the different conversion parameters.

 * Content 
  	- include
  	   > Format
	     include  <path> 
	     Read in all the initialization files defined in <path>. 
	     Used when user needs to add his own definitions. 

  	- setenv
  	   > Format
	     setenv  <env_type>   <path>   [sticky]
	     setenv  <env_type>   <host>   <path>   [sticky]

  	   > Standard Path
	     /usr/local/lib/wnn/zh_CN/
	     To  define  the conversion environment  based on the environment definition 
	     files indicated in <path>. 
	     If  <host>  is given, the environment will be created  on the server of the 
	     specified  hostname.  Similarly, the server will  be that  of the specified 
	     host. 
	     [sticky] implies a permanent environment.
	     <env_type> indicates the environment type.  The types include Pinyin/Zhuyin 
	     input and the Bianma input environment.
	     Pinyin/Zhuyin  input environment  is represented by "PZ".  The Bianma input 
	     environment corresponds to respective input method name.








					- 5-4 -
  	- setenv_R 
  	   > Format
	     setenv_R   <env_type>   <path>   [sticky]
	     setenv_R   <env_type>   <host>   <path>   [sticky]

  	   > Standard Path
	     /usr/local/lib/wnn/zh_CN/
	     Simliar to "setenv" above. The only difference is that "setconvenv_R"
	     is for reverse conversion.  
	     For example, Pinyin-Hanzi conversion will be Hanzi-Pinyin conversion, and 
	     Bianma-Hanzi becomes Hanzi-Bianma conversion. 

  	- setuumkey
  	   > Format
	     setuumkey  <path> 

  	   > Standard Path
	     /usr/local/lib/wnn/zh_CN/uumkey
	     Set <path> as the keyboard function definition file of the client.
	     (For details, refer to Section 5.6)

  	- setrkfile
  	   > Format
	     setrkfile  <path> 

  	   > Standard Path
	     /usr/local/lib/wnn/zh_CN/rk_p/mode  -- for Pinyin
	     /usr/local/lib/wnn/zh_CN/rk_z/mode  -- for Zhuyin 
	     /usr/local/lib/wnn/zh_CN/rk/mode    -- for combination of both
	     Indicates the input mode definition files.  
	     If  <path>  is a  directory, the file "mode" under this directory will be 
	     read. 

  	- setconvkey
  	   > Format
	     setconvkey  [<tty>]  <path> 

  	   > Standard Path
	     /usr/local/lib/wnn/cvt_key_tbl
	     To enable  the change  of functions for the keyboard keys to suit that of 
	     cuum. 
	     The terminal name  must  correspond  to that defined  in the  environment 
	     variable TERM, or else the definitions will be invalid. 
	     "*" can be used for the terminal name.





					- 5-5 -
  	- setdicpath
  	   > Format 
	     setdicpath  <path> 

  	   > Standard Path
	     /usr/local/lib/wnn/zh_CN/dic/sys/
	     Set the path of the dictionary files when adding dictionaries to the 
	     system. Default path is NULL.

  	- sethindopath
  	   > Format
	     sethindopath  <path> 

  	   > Standard Path
	     /usr/local/lib/wnn/zh_CN/dic/usr/@HOME/
	     Set the path of the usage frequency files when adding dictionaries to 
	     the system.  Default path is NULL.

  	- setfuzokugopath
  	   > Format
	     setfuzokugopath  <path> 

  	   > Standard Path
	     /usr/local/lib/wnn/zh_CN/dic/sys
	     Set  the  path of  the  grammar files when adding dictionaries to the 
	     system. Default path is NULL.

  	- not_send_ascii_char 
	  When  the  input  line  is empty,  ASCII characters  will be sent to the 
	  conversion buffer (default).

  	- send_ascii_char 
	  When  the  input line is empty, ASCII characters will not be sent to the 
	  conversion buffer.

  	- waking_up_in_henkan_mode 
	  To set the conversion mode to ON after the startup of the client.

  	- waking_up_no_henkan_mode 
	  To set the conversion mode to OFF after the startup of the client.

  	- setmaxchg  <number> 
	  Indicates the maximum number of characters allowed for conversion at one 
	  time.  Default number is 80.

  	- setmaxbunsetsu   <number> 
	  Indicates the maximum number of words allowed for conversion at one time.  
	  The maximum value is 400 and default is 80.

					- 5-6 -
  	- setmaxichirankosu   <number> 
	  Indicates the number of candidates to be displayed at one time.
	  This will depend on the width of the screen.  Default number is 36.

  	- setmaxhistory  <number> 
	  Indicates the maximum number of entries for the conversion history.  
	  Default value is 11.

  	- excellent_delete 
	  During Pinyin-Hanzi conversion, the input automaton converts the input to 
	  standard Pinyin,  and remembers the most recent Pinyin.  When "backspace" 
	  key is used to delete the current input, the last standard pinyin will be 
	  converted  back to  the original input string so as to enable the user to 
	  make  corrections.  In  other cases, the  entire  Pinyin is  deleted as a 
	  single character.

  	- simple_delete
	  Once the input string is mapped to its corresponding standard Pinyin, the 
	  standard Pinyin will be deleted as a single character.

  	- flow_control_on 
	  To set the flow control of tty to ON (default).

  	- flow_control_off 
	  To set the flow control of tty to OFF.

  	- convkey_not_always_on 
	  When the input mode is set to OFF, all related conversion function keys 
	  are invalid (default).

  	- convkey_always_on 
	  When the input  mode is set to ON, all related conversion function keys 
	  are still valid.

  	- remove_cs 
	  To remove cs from termcap.

  	- not_remove_cs 
	  Do not remove cs from termcap.

  	- touroku_comment 
	  During the addition of a new word, comments can be input.

  	- touroku_no_comment 
	  During the addition of a new word, comments cannot be input.




					- 5-7 -
 * During path definition, the following abbreviations can be used :
  	(1) - 		The value of environment variable HOME .
  	(2) usrname 	The home directory for the user in "/etc/passwd".
  	(3) @HOME 	The value of environment variable HOME .
  	(4) @LIBDIR 	The path "/usr/local/lib/wnn".

 * Example (definition of uum)
	setconvenv      PZ      /usr/local/lib/wnn/zh_CN/wnnenvrc
	setconvenv_R    PZ      /usr/local/lib/wnn/zh_CN/wnnenvrc_R

	setuumkey      	@LIBDIR/zh_CN/uumkey
	setrkfile     	@LIBDIR/zh_CN/rk

	setconvkey      	@LIBDIR/cvt_key_tbl
	setconvkey      ST*     @LIBDIR/cvt_key_tbl.ST 
	setconvkey      kterm*  @LIBDIR/cvt_key_tbl.kt

	setmaxhistory   20

	waking_up_no_convert_mode	;waking_up_no_henkan_mode
        flow_control_on
	admin_comment   ;touroku_comment
        not_send_ascii_char 


 * Note
	During  startup  of client, files such as dictionaries, grammar files and 
	usage frequency files will be read in by the server if they have not been 
	read in during cserver startup.  If they do not exist, server will create 
	a new file.

 * Reference 
	cuum(4.3)  cserver(4.2)  sys_dic (7.3)  usr_dic (7.3)
















					- 5-8 -

   5.4  wnnenvrc - ENVIRONMENT INITIALIZATION    
   ===========================================

 * Description 
	wnnenvrc  -  Initialzation file for Hanzi conversion environment

 * Standard path 
	(1) The corresponding file defined in uumrc
	(2) /usr/local/lib/wnn/zh_CN/wnnenvrc

 * Function 
	Defines the  conversion  environment for  the user.  This file is defined in 
	uumrc.  When the file is redefined, the latest version will be valid.

 * Content 
  	- include <wnnenvrc filename> 
	  To read in other wnnenvrc files.

  	- setdic  <p1>  <p2>  <p3>  <p4>  <p5>  <p6>  <p7>  <p8> 
	  To set a dictionary for the current environment.
	  "setdic" command  can be used to  define several dictionaries for the same 
	  environment.
	  <p1> <filename>   --  Set the dictionary filename.
	  <p2> <filename>   --  Set  the usage  frequency  filename of the specified 
				dictionary.
			    --	<p2> can be represented by "-" as default.
				By default, usage frequency defined in the dictionary 
				will be used.
			    --  When  defining  usage  frequency  file <p2>, it must 
				correspond to the file in <p1>.
	  <p3> <n>   	    --  Set the priority of the dictionary.
				It is represented in decimal
	  <p4> <0/1>        --  1: dictionary is read only 
		      		0: dictionary can be updated
	  <p5> <0/1>        --  1: usage frequency file is read only 
			      	0: usage frequency file can be updated
	  <p6> <filename>   --  Set the password filename of the dictionary.
			    --	<p6> can be represented by "-" as default.	
	  <p7> <filename>   --  Set the password filename of the usage frequency file.
			    --	<p7> can be represented by "-" as default.	
	  <p8> <0/1>        --	1: Forward
			    --  0: Reverse 

	  Example :  setdic basic.dic   -  5 0 0  - - 0




					- 5-9 -
  	- setfuzokugo <file_name>   
	  Set the grammar file.

  	- setparam  <c0>  <c1>   <c2>   <c3>   <c4>   <c5>   <c6>   <c7>  <c8>  
		    <c9>  <c10>  <c11>  <c12>  <c13>  <c14>  <c15>  <c16>  

	  Set  the  parameter  values for Pinyin-Hanzi conversion. (refer to 5.2)
	  The parameters should  be integers. During conversion, the server  uses 
	  these parameter values to determine the conversion result.  By default, 
	  the system uses the values defined by "def_param" in the cserver.

  	- confirm
	  When the usage frequency files set in "setdic" do not exist, the system 
	  confirms with the user on whether he wants to create each individual new 
	  usage frequency file.

  	- confirm1
	  When the usage frequency files set in "setdic" do not exist, the system 
	  only confirm once with the  user to  create all the new usage frequency
	  files.

	- create_without_confirm 
	  When the usage frequency files  set in "setdic" do not exist, new usage
	  frequency files will be created automatically.

  	- no_create 
	  When the usage frequency files set in "setdic"  do not exist, new usage
	  frequency file will not be created automatically.

 * Example 
	confirm1
	setdic  sys/level_1.dic         usr/@USR/level_1.h      4 1 0 - - 0
	setdic  sys/level_2.dic         usr/@USR/level_2.h      1 1 0 - - 0
	setdic  sys/basic.dic           usr/@USR/basic.h        7 1 0 - - 0
	setdic  usr/@USR/ud             -                       5 0 0 - - 0
	setfuzokugo     sys/full.con

        def_param      1 8 5 50 10 20 10 40 1200 200 0 0 0 0 0 16 0
 
 * Note
	During path definition, the following abbreviations can be used.
	(1) -		The value of environment variable HOME
	(2) -username	The home directory of the username defined in /etc/passwd.
	(3) @HOME	The value of environment variable HOME
	(4) @LIBDIR	The path /usr/local/lib/wnn
	(5) @USR	The value of environment variable LOGNAME



					- 5-10 -

   5.5  wnnenvrc_R  -  INITIALIZATION FILE FOR REVERSE CONVERSION ENVIRONMENT    
   ===========================================================================

 * Description 
	wnnenvrc_R  -  The initialization file of reverse conversion environment.

 * Standard path 
	(1) The corresponding file defined in uumrc
	(2) /usr/local/lib/wnn/zh_CN/wnnenvrc_R

 * Function 
	Defines  the  reverse conversion environment for the user.  This file is 
	defined in "uumrc".  When the file is redefined, the latest version will
	be valid.

 * Content 
	Similar to "wnnenvrc".  For details, please refer to Section 5.4.

 * Example 
	confirm1
	setdic  sys/level_1.dic         usr/@USR/level_1.h      4 1 0 - - 1
	setdic  sys/level_2.dic         usr/@USR/level_2.h      1 1 0 - - 1
	setdic  sys/basic.dic           usr/@USR/basic.h        7 1 0 - - 1
	setdic  usr/@USR/ud             -                       5 0 0 - - 1
	setfuzokugo     sys/full.conR
        setparam 	1 8 5 50 10 20 10 40 1200 200 0 0 0 0 0 16 0  

	The value of the 8th parameter is "1".  This implies that the dictionary 
	is used for reverse conversion.



















					- 5-11 -

   5.6  uumkey - THE KEYBOARD DEFINITION FILE FOR THE CLIENT   
   ==========================================================

 * Description 
	uumkey  -  The keyboard definition file for the client

 * Standard path 
	/usr/local/lib/wnn/zh_CN/uumkey

 * Function 
	uumkey is  the  definition file for the keyboard layout during conversion.  The 
	relationship  between  an input key and its command defined in the uumkey file.  
	User can  define the function of a particular key according to his needs.  Lines 
	that begin with ":" or ";" are treated as comments.

 * Content 
  	- include  <uumkey filename> 
	  Read in other keyboard definition files.

 	- command  <key>  [ <key>  ....]
	  Definition of function keys: <key>  can be represented in decimal, hexadecimal,
				       octal or character enclosed between single quotes.
				       There  are 11 states  for the front-end processor. 
				       (Refer to State Table)

  	- unset <command> 
	  To remove all the function key definitions which correspond to <command>.





















					- 5-12 -
    State Table
   +-------------------------------------------------------------------------------+
   | State Number  |                     Description                               |
   |---------------+---------------------------------------------------------------|
   | 	0     	   | The state of performing correction on the conversion result   |
   | 	1     	   | The state before conversion, ie. the input state.       	   |
   | 	2     	   | The state when segmentation is done to the words and phrases  |
   |	  	   | after conversion.						   |
   | 	3     	   | The initial state when the input buffer is empty.             |
   | 	4     	   | The state of cursor movement for the selection of candidates  |
   |        	   | for a Chinese character. (including the selection of phrase   |
   |		   | candidates, performing certain operations, and selection of   |
   |		   | grammatical category and dictionary when adding words.	   |
   | 	5     	   | The state  that specifies the range of characters to be added |
   |		   | as a new word.						   | 
   | 	6     	   | The input state for Pinyin during the addition of new words   |
   |		   | to dictionary 						   |
   | 	7     	   | The state for searching/deleting word or dictionary 	   |
   | 	8     	   | The inspect state; search for a word and retrieve information |
   |        	   | of the word.                            			   |
   | 	9     	   | The state for dictionary search.                              |
   | 	A     	   | The inspect state.                                            |
   +-------------------------------------------------------------------------------+  


 * Command format 
	The following shows the relationship between the function keys and their
	states.
	(1) Format-1:  command name   function description
	(2) Format-2:  command name   state number:  function description
                             	      state number:  function description
                           	       ....            ....
 
 * Command description 
  	- convert_on   0123456789
	  To set conversion state to ON or OFF.

  	- quote_keyin   0123456789
	  To  quote the  next input character so that function keys used for setting
	  conversion state can  also be  used for input.  This function  is used for 
	  special cases when input of "convert_on" function key code is needed.

  	- send_string  012
	  To send the conversion characters together with the corresponding function 
	  code to application procedure.




					- 5-13 -
  	- definite   012
	  (Confirm) To send the conversion character string to application procedure.

  	- forward_char   01256
	  156: To move the cursor one character position to the right
	  0  : To move the cursor one word to the right
	  2  : To remain the cursor position as ASCII, perform multi-phrase conversion 
	       for the character after the cursor, and move the cursor one word to the 
	       right.

  	- backward_char   01256
	  1  : To move the cursor one character position to the left.  
	       If this function is used when the cursor is at the leftmost position of 
	       the unconverted  portion or a  partially converted string, multi-phrase 
	       conversion  will be performed  and the cursor will move one word to the 
	       left.
	  56 : To move the cursor one character to the left. 
	  0  : To move the cursor one word to the left.
	  2  : The  highlighted  portion will remain as ASCII, the portion  beyond the 
	       highlighted  part will undergo  multi-phrase conversion, and the cursor 
	       will move one word to the left.

  	- goto_top_of_line   01256
	  1256: To move the cursor to the first character of the line.
	  0   : To move the cursor to the first word of the line.

  	- goto_end_of_line   01256
	  1256: To move the cursor to the last character of the line.
	  0   : To move the cursor to the last word of the line.

  	- delete_char_at_cursor   156
	  To remove the character at the position of the cursor.

  	- kaijo   02
	  To  change the converted  character strings  after the  cursor back  to that 
	  before the conversion.

  	- henkan   1
	  To perform multi-phrase conversion.

  	- tan_henkan   1
	  To perform conversion for a single word.

  	- tan_henkan_dai   1
	  To perform conversion for a phrase.




					- 5-14 -
	- nobi_henka   2
	  During word elongation, the highlighted portion will be converted as a 
	  word and the remaining portion will undergo multi-phrase conversion.

  	- nobi_henka_dai   2
	  During compulsory word segmentation, the portion before the cursor will 
	  be converted to a phrase, and the portion after the cursor will undergo 
	  multi-phrase conversion.

  	- jikouho   0
	  To extract the next word candidate.

  	- jikouho_dai   0
	  To extract the next phrase candidate.

  	- zenkouho   0
	  To extract the previous word candidate.

  	- zenkouho_dai   0
	  To extract the previous phrase candidate.

  	- select_jikouho   0
	  To extract the next group of word candidates.

  	- select_jikouho_dai   0
  	  To extract the next group of phrase cnadidates.

  	- kana_henkan     1
	  To perform  Hanzi_Pinyin (Bixing) conversion, ie. reverse conversion.

  	- kill   156
	  To remove the characters from and including the cursor position, and 
	  store them in the "kill" buffer.

  	- yank   156

  	- yank_e   1356
	  To insert the content of the "kill" buffer into the current cursor 
	  position.

  	- bunsetu_nobasi   02
	  To increase one character to the length of a word.

  	- bunsetu_nobasi_e   02
	  To decrease one character from the length of a word.

  	- dic_utility   012


					- 5-15 -
  	- dic_utility_e   0123
	  To enter the dictionary operation state.

  	- touroku   012

  	- touroku_e    0123
	  To enter the word addition state.

  	- sainyuuryoku   1

  	- sainyuuryoku_e    13
	  To re-input the previously input character strings.

  	- redraw_line   012456789

  	- redraw_line   0123456789
	  To redraw the conversion input line.

  	- previous_history   1

  	- previous_history_e   13
	  To extract the previous string stored in history.

	- next_history	1

	- next_history_e    13
	  To extract the next string stored in history.

  	- touroku_mark_set   5
	  To set the  beginning and  ending  position of the  input string during 
	  word  addition.  When  the  beginning and ending position are the same, 
	  ie length of word is 0, return to the initial state.

  	- touroku_return   6
	  To end  the input of Pinyin (Bixing code) string  during word addition.

  	- quit   4567 
	  When in a state other than conversion state and input state (eg. viewing 
	  of candidates for a Chinese character, word addition etc, state number 
	  4,5,6,7), exit the state.

  	- touroku_jump_forward   5
	  During word addition, move the cursor by one word to the front.

  	- touroku_jump_backward   5
	  During word addition, move the cursor by one word to the rear.



					- 5-16 -
  	- change_to_insert_mode   0
	  To change the converted input string back to insert mode, and there after,
	  the converted Hanzi cannot change back to its Pinyin (or Bixing) form. 

  	- quote   1

  	- quote_e   13
	  To omit passing the next input character (except "henkan_on" ) to the 
	  input automaton conversion.  Instead, pass it directly to the conversion 
	  line.

  	- forward_select   4789
	  4   : When selecting candidates, the highlighted portion will move to the 
		right.
	  789 : During dictionary search, if a line is not selected, it will scroll 
		forward.

  	- backward_select   4789
	  4   : When selecting candidates, the highlighted portion will move to the 
		left.
	  789 : During dictionary search, if a line is not selected, it will scroll 
		backward.
		
  	- next_select   4789
	  4   : To move to the next screen during the selection of candidates.
	  789 : To move to the next line during dictionary search.

  	- previous_select   4789
	  4   : To move to the previous screen during the selection of candidates.
	  789 : To move to the previous line during dictionary search.

  	- linestart_select   4789
	  4   : To move to the top of the screen during the selection of candidates.
	  789 : During dictionary search, if a line is not selected, move to the 
	   	first screen.

  	- lineend_select   4789
	  4   : To move to the end of the screen during the selection of candidates.
	  789 : During dictionary search, if a line is not selected, move to the 
	 	last screen.

  	- select_select   4789
	  4   : During the selection of candidates, select one candidate and exit 
	 	from this state. 
	  789 : During dictionary search, select a candidate and exit from this 
		state.



					- 5-17 -
  	- send_ascii_char   0123456789    
	  When  the input  buffer is  empty, the  ASCII character input will not be 
	  sent to the buffer.

  	- not_send_ascii_char   0123456789  
	  When the input buffer is empty, the ASCII character input will be sent to 
	  the buffer.

  	- pop_send_ascii_char   0123456789
	  If  the input buffer is empty, the operation of the ASCII character input 
	  will be changed back to the previous state.

  	- toggle_send_ascii_char   0123456789
	  If the input buffer is  empty, the operation of the ASCII character input 
	  will be reversed (ie. if the current operation is "send_ascii_char", then 
	  it will be set to "not_send_ascii_char" and vice versa).

  	- quote_send_ascii_char   
	  In  the "send_ascii_char" state,  if the buffer is  empty, the next ASCII 
	  character will enter the buffer.  However, subsequent characters will not
	  enter the buffer even if it is empty.

  	- reconnect_jserver   012456789
	  To reconnect with the cserver

  	- inspect   0
	  To check the dictionary.

  	- sakujo_kouho   0
	  To delete a candidate. 

  	- del_entry    89
	  To delete dictionary as well as the words in the dictionary.

  	- use_entry    89
	  To temporary stop  and subsequently reuse the dictionary as well as the 
	  words in the dictionary.

 * Example  
	;Commands          Code
	forward_char       ^F 0x90
	jikouho        ^N 0x92  ^W 0x9E
	yank_e             ^Y
	select_select      32  ^J  ^M  0x9E  0x9F





					- 5-18 -
 * Note
	When the conversion state is OFF, the front-end processor will be temporary
	disconnected. Therefore, the input automaton also stops functioning.
	A key code refers to a code between  0 and 255.  However, not all codes can 
	be  entered  from  the keyboard.  To  input  a code that  cannot be entered 
	directly via the keyboard, use key code conversion (Refer to 5.7)  or input 
	automaton (Refer to chapter 6).  
 
 * Reference 
	uum(4.1), uumrc(5.3),  cvt_key_tbl (5.7), romkan(6)

 





































					- 5-19 -

   5.7  cvt_key_tbl  - KEY CODE CONVERSION TABLE FILE   
   ==================================================

 * Description 
	cvt_key_tbl  -  The key code conversion table for the front-end processor.

 * Standard path 
	/usr/local/lib/wnn/cvt_key_tbl 

 * Function 
	To differentiate  the character  code of the  keyboard from terminfo, and 
	convert them to single characters according to the function.

 * Format 
	[terminfo entry <space>  code]  (Unios-U)
	[termcap  entry <space>  code]  (Unios-B)

 * Terminfo entries which can undergo conversion 
        kf0,  kf1,   kf2,   kf3,   kf4,   kf5,   kf6,   kf7,
        kf8,  kf9,   kf10,  kf11,  kf12,  kf13,  kf14,  kf15,
        kf16, kf17,  kf18,  kf19,  kf20,  ksf21, kf22,  kf23,
        kf24, kf25,  kf26,  kf27,  kf28,  kf29,  kf30,  kf31,
        kbs,  ktbc,  kclr,  kctab, kdch1, kdll,  kcud1, krmir,
        kel,  ked,   khome, kich1, kil1,  kcub1, kll,   knp,
        kpp,  kcuf1, kind,  kri,   khts,  kcuu1
 
 * Termcap entries which can undergo conversion 
	cs, rc, sc, se, so, us, ue, cm, ce, cl, bl, li, co

 * Code expression 
  	(1) Except for space, \ and ^ , all characters will be represented as 
	    they are.  Example: A, 1.

  	(2) ^<character>   
	    <character>  can be @, A(a), B(b), C(c), D(d), E(e), F(f), ...Z(z), 
	   [, \ ,], ^, _

	   ^@ is Ctrl + space(0x00)
	   ^A is Ctrl + A (0x01)
		:
		:
	   ^_ is Ctrl + (0x1f)






					- 5-20 -
  	(3) \<octal number>, \o<octal number>, \d<decimal number>,
	    \x<hexadecimal number> character codes can be represented directly.
	    Example: \x81

  	(4) \n, \t, \b, \r, \f, \e, \E represent NEWLINE, TAB, BACKSPACE, 
	    CR, FORMFEED, ESC, ESC respectively.

  	(5) \<character>
	    <character>  can be any character except 0,1,2,3,4,5,6,7, 
	    o, d, x, n, t, b, r, f, e, E 
	    \\ means \ itself.

 * Example 
	kf1       \x81
	kf2       \x82
	kf3       \x83
	kf4       \x84
	kcud1     \x92
	kcub1     \x91
	kcuf1     \x90
	kcuu1     \x93

 * Note 
	Codes which are converted from this conversion code table will be evaluated 
	in  (a) input mode control table (2A_CTRL) of input automaton
	    (b) uumkey 

 * Reference 
	uum(4.3), uumkey(5.6)




















					- 5-21 -