view Wnn/manual.en/2.env/wnn/uumkey @ 0:bbc77ca4def5

initial import

UUMKEY(4)

NAME
    uumkey  -  The keyboard definition file for the uum

SYNOPSIS
    /usr/local/lib/wnn/ja_JP/uumkey

DESCRIPTION
    uumkey is the definition file for the keyboard layout during conversion.
    User can define the function of a particular key according to his needs.
    Lines 
	that begin with ":" or ";" are treated as comments.

	include  <uumkey_filename> 
	    Specifies the other keyboard definition files.

	unset <command> 
	    Specifies the command to remove all the function key definitions
	    which correspond to <command>.

	command  <key>  [ <key>  ....]
	    Definition of function keys: <key> can be represented in decimal,
	    hexadecimal, octal or character enclosed between single quotes.
	    There  are 11 states  for the front-end processor. 
	    (Refer to State Table)


    State Table
+------------------------------------------------------------------------------+
| State Number |                     Description                               |
|--------------+---------------------------------------------------------------|
| 	0      | The state of performing correction on the conversion result   |
| 	1      | The state before conversion, ie. the input state.             |
| 	2      | The state when segmentation is done to the words and phrases  |
|	       | after conversion.					       |
| 	3      | The initial state when the input buffer is empty.             |
| 	4      | The state of cursor movement for the selection of candidates  |
|              | for a Chinese character. (including the selection of phrase   |
|              | candidates, performing certain operations, and selection of   |
|              | grammatical category and dictionary when adding words.	       |
| 	5      | The state  that specifies the range of characters to be added |
|              | as a new word.						       |
| 	6      | The input state for Pinyin during the addition of new words   |
|              | to dictionary 						       |
| 	7      | The state for searching/deleting word or dictionary 	       |
| 	8      | The inspect state; search for a word and retrieve information |
|              | of the word.                            		       |
| 	9      | The state for dictionary search.                              |
| 	A      | The inspect state.                                            |
+------------------------------------------------------------------------------+  
 
    The following settings are specified in this file.
	henkan_on   0123456789
	    To set conversion state to ON or OFF.

	quote_keyin   0123456789
	    To quote the next input character so that function keys used for
	    setting conversion state can also be used for input. This function
	    is used for special cases when input of "convert_on" function key
	    code is needed.

	send_string  012
	    To send the conversion characters together with the corresponding
	    function code to application procedure.

	kakutei   012
	    (Confirm) To send the conversion character string to application
	    procedure.

	forward_char   01256
	    156: To move the cursor one character position to the right
	    0  : To move the cursor one word to the right
	    2  : To remain the cursor position as ASCII, perform multi-phrase
		 conversion for the character after the cursor, and move the
		 cursor one word to the right.

	backward_char   01256
	    1  : To move the cursor one character position to the left.  
		 If this function is used when the cursor is at the leftmost
		 position of the unconverted portion or a  partially converted
		 string, multi-phrase conversion will be performed and the
		 cursor will move one word to the left.
	    56 : To move the cursor one character to the left. 
	    0  : To move the cursor one word to the left.
	    2  : The  highlighted portion will remain as ASCII, the portion 
		 beyond the highlighted  part will undergo multi-phrase
		 conversion, and the cursor will move one word to the left.

	goto_top_of_line   01256
	    1256: To move the cursor to the first character of the line.
	    0   : To move the cursor to the first word of the line.

	goto_end_of_line   01256
	    1256: To move the cursor to the last character of the line.
	    0   : To move the cursor to the last word of the line.

	delete_char_at_cursor   156
	    To remove the character at the position of the cursor.

	kaijo   02
	    To change the converted  character strings after the cursor back
	    to that before the conversion.

	henkan   1
	    To perform multi-phrase conversion.

	tan_henkan   1
	    To perform conversion for a single word.

	tan_henkan_dai   1
	    To perform conversion for a phrase.

	nobi_henka   2
	    During word elongation, the highlighted portion will be converted
	    as a word and the remaining portion will undergo multi-phrase
	    conversion.

	nobi_henka_dai   2
	    During compulsory word segmentation, the portion before the cursor
	    will be converted to a phrase, and the portion after the cursor
	    will undergo multi-phrase conversion.

	jikouho   0
	    To extract the next word candidate.

	jikouho_dai   0
	    To extract the next phrase candidate.

 	zenkouho   0
	    To extract the previous word candidate.

 	zenkouho_dai   0
	    To extract the previous phrase candidate.

 	select_jikouho   0
	    To extract the next group of word candidates.

 	select_jikouho_dai   0
	    To extract the next group of phrase cnadidates.

 	kana_henkan     1
	    To perform Kanji-To-Kana conversion, ie. reverse conversion.

 	kill   156
	    To remove the characters from and including the cursor position,
	    and store them in the "kill" buffer.

 	yank   156
 	yank_e   1356
	    To insert the content of the "kill" buffer into the current cursor 
	    position.

 	bunsetu_nobasi   02
	    To increase one character to the length of a word.

 	bunsetu_chijime   02
	    To decrease one character from the length of a word.

 	jisho_utility   012
 	jisho_utility_e   0123
	    To enter the dictionary operation state.

 	touroku   012
 	touroku_e    0123
	    To enter the word addition state.

 	sainyuuryoku   1
 	sainyuuryoku_e    13
	    To re-input the previously input character strings.

	kuten    156
	kuten_e    1356
	    To input in kuten code mode.

	jis    156
	jis_e    1356
	    To input in jis code mode.

 	redraw_line   012456789
 	redraw_line   0123456789
	    To redraw the conversion input line.

 	previous_history   1
 	previous_history_e   13
	    To extract the previous string stored in history.

	next_history	1
	next_history_e    13
	    To extract the next string stored in history.

 	touroku_mark_set   5
	    To set the beginning and ending position of the input string during 
	    word addition. When the beginning and ending position are the same, 
	    ie length of word is 0, return to the initial state.

 	touroku_return   6
	  To end the input of string during word addition.

 	quit   4567 
	    When in a state other than conversion state and input state
	    (eg. viewing of candidates, word addition etc, state number 
	    4,5,6,7), exit the state.

 	touroku_jump_forward   5
	    During word addition, move the cursor by one word to the front.

 	touroku_jump_backward   5
	    During word addition, move the cursor by one word to the rear.



					- 5-16 -
 	change_to_insert_mode   0
	    To change the converted input string back to insert mode, and there
	    after, the converted Kanji cannot change back to its Kanaa form. 

 	quote   1
 	quote_e   13
	    To omit passing the next input character (except "henkan_on" ) to
	    the input automaton conversion. Instead, pass it directly to the
	    conversion line.

 	forward_select   4789
	    4 : When selecting candidates, the highlighted portion will move to
		the right.
	    789 : During dictionary search, if a line is not selected, it will
		  scroll forward.

 	backward_select   4789
	    4 : When selecting candidates, the highlighted portion will move to
		the left.
	    789 : During dictionary search, if a line is not selected, it will
		  scroll backward.
		
 	next_select   4789
	    4   : To move to the next screen during the selection of candidates.
	    789 : To move to the next line during dictionary search.

 	previous_select   4789
	    4   : To move to the previous screen during the selection of
		  candidates.
	    789 : To move to the previous line during dictionary search.

 	linestart_select   4789
	    4   : To move to the top of the screen during the selection of
		  candidates.
	    789 : During dictionary search, if a line is not selected, move to
		  the first screen.

 	lineend_select   4789
	    4   : To move to the end of the screen during the selection of
		  candidates.
	    789 : During dictionary search, if a line is not selected, move to
		  the last screen.

 	select_select   4789
	    4   : During the selection of candidates, select one candidate and
		  exit from this state. 
	    789 : During dictionary search, select a candidate and exit from
		  this state.

 	send_ascii_char   0123456789    
	    When the input buffer is empty, the ASCII character input will not
	    be sent to the buffer.

 	not_send_ascii_char   0123456789  
	    When the input buffer is empty, the ASCII character input will be
	    sent to the buffer.

 	pop_send_ascii_char   0123456789
	    If the input buffer is empty, the operation of the ASCII character
	    input will be changed back to the previous state.

 	toggle_send_ascii_char   0123456789
	    If the input buffer is  empty, the operation of the ASCII character
	    input will be reversed (ie. if the current operation is
	    "send_ascii_char", then it will be set to "not_send_ascii_char"
	    and vice versa).

 	quote_send_ascii_char   
	    In the "send_ascii_char" state, if the buffer is empty, the next
	    ASCII character will enter the buffer.  However, subsequent
	    characters will not enter the buffer even if it is empty.

 	reconnect_jserver   012456789
	    To reconnect with the jserver

 	inspect   0
	    To check the dictionary.

 	sakujo_kouho   0
	    To delete a candidate. 

 	del_entry    89
	    To delete dictionary as well as the words in the dictionary.

 	use_entry    89
	    To temporary stop and subsequently reuse the dictionary as well as
	    the words in the dictionary.

 * Example  
	;Commands		Code

	forward_char		^F 0x90
	jikouho			^N 0x92 ^W 0x9E
	yank_e			^Y
	select_select		32 ^J ^M 0x9E 0x9F





					- 5-18 -
NOTE
    When the conversion state is OFF, the front-end processor will be temporary
    disconnected. Therefore, the input automaton also stops functioning.
    A key code refers to a code between  0 and 255. However, not all codes can 
    be  entered  from  the keyboard. To input a code that cannot be entered 
    directly via the keyboard, use key code conversion (cvt_key_tbl(4)) or
    automaton.

    Can not set output code of key code conversion to code of henkan_on entry.
 
 * Reference 
	uun(1), uunrc(4), cvt_key_tbl(4), automaton(4)