Mercurial > freewnn

--- a/aclocal.m4	Fri Jan 23 16:36:13 2009 +0900
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,7959 +0,0 @@
-# generated automatically by aclocal 1.10 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006  Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-#
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-m4_define([_LT_COPYING], [dnl
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-])
-
-# serial 56 LT_INIT
-
-
-# LT_PREREQ(VERSION)
-# ------------------
-# Complain and exit if this libtool version is less that VERSION.
-m4_defun([LT_PREREQ],
-[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
-       [m4_default([$3],
-		   [m4_fatal([Libtool version $1 or higher is required],
-		             63)])],
-       [$2])])
-
-
-# _LT_CHECK_BUILDDIR
-# ------------------
-# Complain if the absolute build directory name contains unusual characters
-m4_defun([_LT_CHECK_BUILDDIR],
-[case `pwd` in
-  *\ * | *\	*)
-    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
-esac
-])
-
-
-# LT_INIT([OPTIONS])
-# ------------------
-AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
-AC_BEFORE([$0], [LT_LANG])dnl
-AC_BEFORE([$0], [LT_OUTPUT])dnl
-AC_BEFORE([$0], [LTDL_INIT])dnl
-m4_require([_LT_CHECK_BUILDDIR])dnl
-
-dnl Autoconf doesn't catch unexpanded LT_ macros by default:
-m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
-m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
-dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
-dnl unless we require an AC_DEFUNed macro:
-AC_REQUIRE([LTOPTIONS_VERSION])dnl
-AC_REQUIRE([LTSUGAR_VERSION])dnl
-AC_REQUIRE([LTVERSION_VERSION])dnl
-AC_REQUIRE([LTOBSOLETE_VERSION])dnl
-m4_require([_LT_PROG_LTMAIN])dnl
-
-dnl Parse OPTIONS
-_LT_SET_OPTIONS([$0], [$1])
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-_LT_SETUP
-
-# Only expand once:
-m4_define([LT_INIT])
-])# LT_INIT
-
-# Old names:
-AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
-AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
-dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
-
-
-# _LT_FILEUTILS_DEFAULTS
-# ----------------------
-# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
-m4_defun([_LT_FILEUTILS_DEFAULTS],
-[: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-])# _LT_FILEUTILS_DEFAULTS
-
-
-# _LT_SETUP
-# ---------
-m4_defun([_LT_SETUP],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-_LT_DECL([], [host_alias], [0], [The host system])dnl
-_LT_DECL([], [host], [0])dnl
-_LT_DECL([], [host_os], [0])dnl
-dnl
-_LT_DECL([], [build_alias], [0], [The build system])dnl
-_LT_DECL([], [build], [0])dnl
-_LT_DECL([], [build_os], [0])dnl
-dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-test -z "$LN_S" && LN_S="ln -s"
-_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
-dnl
-AC_REQUIRE([LT_CMD_MAX_LEN])dnl
-_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
-_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
-dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-m4_require([_LT_CMD_RELOAD])dnl
-m4_require([_LT_CHECK_MAGIC_METHOD])dnl
-m4_require([_LT_CMD_OLD_ARCHIVE])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-
-_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-])
-if test -n "${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-
-_LT_CHECK_OBJDIR
-
-m4_require([_LT_TAG_COMPILER])dnl
-_LT_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    _LT_PATH_MAGIC
-  fi
-  ;;
-esac
-
-# Use C for the default configuration in the libtool script
-LT_SUPPORTED_TAG([CC])
-_LT_LANG_C_CONFIG
-_LT_LANG_DEFAULT_CONFIG
-_LT_CONFIG_COMMANDS
-])# _LT_SETUP
-
-
-# _LT_PROG_LTMAIN
-# ---------------
-# Note that this code is called both from `configure', and `config.status'
-# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
-# so we pass a copy along to make sure it has a sensible value anyway.
-m4_defun([_LT_PROG_LTMAIN],
-[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
-_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
-])# _LT_PROG_LTMAIN
-
-
-
-# So that we can recreate a full libtool script including additional
-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
-# label.
-
-
-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
-# ----------------------------------------
-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL_INIT],
-[m4_ifval([$1],
-          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
-                     [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_INIT])
-
-
-# _LT_CONFIG_LIBTOOL([COMMANDS])
-# ------------------------------
-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL],
-[m4_ifval([$1],
-          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
-                     [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
-
-
-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
-# -----------------------------------------------------
-m4_defun([_LT_CONFIG_SAVE_COMMANDS],
-[_LT_CONFIG_LIBTOOL([$1])
-_LT_CONFIG_LIBTOOL_INIT([$2])
-])
-
-
-# _LT_FORMAT_COMMENT([COMMENT])
-# -----------------------------
-# Add leading comment marks to the start of each line, and a trailing
-# full-stop to the whole comment if one is not present already.
-m4_define([_LT_FORMAT_COMMENT],
-[m4_ifval([$1], [
-m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
-              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
-)])
-
-
-
-
-
-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
-# -------------------------------------------------------------------
-# CONFIGNAME is the name given to the value in the libtool script.
-# VARNAME is the (base) name used in the configure script.
-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
-# VARNAME.  Any other value will be used directly.
-m4_define([_LT_DECL],
-[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
-    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
-	[m4_ifval([$1], [$1], [$2])])
-    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
-    m4_ifval([$4],
-	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
-    lt_dict_add_subkey([lt_decl_dict], [$2],
-	[tagged?], [m4_ifval([$5], [yes], [no])])])
-])
-
-
-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
-# --------------------------------------------------------
-m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
-
-
-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_tag_varnames],
-[_lt_decl_filter([tagged?], [yes], $@)])
-
-
-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
-# ---------------------------------------------------------
-m4_define([_lt_decl_filter],
-[m4_case([$#],
-  [0], [m4_fatal([$0: too few arguments: $#])],
-  [1], [m4_fatal([$0: too few arguments: $#: $1])],
-  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
-  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
-  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
-])
-
-
-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
-# --------------------------------------------------
-m4_define([lt_decl_quote_varnames],
-[_lt_decl_filter([value], [1], $@)])
-
-
-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_dquote_varnames],
-[_lt_decl_filter([value], [2], $@)])
-
-
-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_varnames_tagged],
-[m4_assert([$# <= 2])dnl
-_$0(m4_quote(m4_default([$1], [[, ]])),
-    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
-    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
-m4_define([_lt_decl_varnames_tagged],
-[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
-
-
-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_all_varnames],
-[_$0(m4_quote(m4_default([$1], [[, ]])),
-     m4_if([$2], [],
-	   m4_quote(lt_decl_varnames),
-	m4_quote(m4_shift($@))))[]dnl
-])
-m4_define([_lt_decl_all_varnames],
-[lt_join($@, lt_decl_varnames_tagged([$1],
-			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
-])
-
-
-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
-# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'.  VARNAME
-# must have a single quote delimited value for this to work.
-m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
-
-
-# _LT_CONFIG_STATUS_DECLARATIONS
-# ------------------------------
-# We delimit libtool config variables with single quotes, so when
-# we write them to config.status, we have to be sure to quote all
-# embedded single quotes properly.  In configure, this macro expands
-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
-#
-#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
-    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAGS
-# ----------------
-# Output comment and list of tags supported by the script
-m4_defun([_LT_LIBTOOL_TAGS],
-[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
-])
-
-
-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
-# -----------------------------------
-# Extract the dictionary values for VARNAME (optionally with TAG) and
-# expand to a commented shell variable setting:
-#
-#    # Some comment about what VAR is for.
-#    visible_name=$lt_internal_name
-m4_define([_LT_LIBTOOL_DECLARE],
-[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
-					   [description])))[]dnl
-m4_pushdef([_libtool_name],
-    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
-m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
-    [0], [_libtool_name=[$]$1],
-    [1], [_libtool_name=$lt_[]$1],
-    [2], [_libtool_name=$lt_[]$1],
-    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
-m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
-])
-
-
-# _LT_LIBTOOL_CONFIG_VARS
-# -----------------------
-# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
-# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
-# section) are produced by _LT_LIBTOOL_TAG_VARS.
-m4_defun([_LT_LIBTOOL_CONFIG_VARS],
-[m4_foreach([_lt_var],
-    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
-    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAG_VARS(TAG)
-# -------------------------
-m4_define([_LT_LIBTOOL_TAG_VARS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
-    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
-
-
-# _LT_TAGVAR(VARNAME, [TAGNAME])
-# ------------------------------
-m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
-
-
-# _LT_CONFIG_COMMANDS
-# -------------------
-# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
-# variables for single and double quote escaping we saved from calls
-# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'.  Finally, any additional code accumulated
-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
-m4_defun([_LT_CONFIG_COMMANDS],
-[AC_PROVIDE_IFELSE([LT_OUTPUT],
-	dnl If the libtool generation code has been placed in $CONFIG_LT,
-	dnl instead of duplicating it all over again into config.status,
-	dnl then we will have config.status run $CONFIG_LT later, so it
-	dnl needs to know what name is stored there:
-        [AC_CONFIG_COMMANDS([libtool],
-            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
-    dnl If the libtool generation code is destined for config.status,
-    dnl expand the accumulated commands and init code now:
-    [AC_CONFIG_COMMANDS([libtool],
-        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
-])#_LT_CONFIG_COMMANDS
-
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
-[
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-_LT_CONFIG_STATUS_DECLARATIONS
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
-
-# Quote evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_quote_varnames); do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-    *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Double-quote double-evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_dquote_varnames); do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-    *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\[$]0 --fallback-echo"')dnl "
-  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
-  ;;
-esac
-
-_LT_OUTPUT_LIBTOOL_INIT
-])
-
-
-# LT_OUTPUT
-# ---------
-# This macro allows early generation of the libtool script (before
-# AC_OUTPUT is called), incase it is used in configure for compilation
-# tests.
-AC_DEFUN([LT_OUTPUT],
-[: ${CONFIG_LT=./config.lt}
-AC_MSG_NOTICE([creating $CONFIG_LT])
-cat >"$CONFIG_LT" <<_LTEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate a libtool stub with the current configuration.
-
-lt_cl_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-AS_SHELL_SANITIZE
-_AS_PREPARE
-
-exec AS_MESSAGE_FD>&1
-exec AS_MESSAGE_LOG_FD>>config.log
-{
-  echo
-  AS_BOX([Running $as_me.])
-} >&AS_MESSAGE_LOG_FD
-
-lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
-for use in further configure time tests before the real libtool is
-generated.
-
-Usage: $[0] [[OPTIONS]]
-
-  -h, --help      print this help, then exit
-  -V, --version   print version number, then exit
-  -q, --quiet     do not print progress messages
-  -d, --debug     don't remove temporary files
-
-Report bugs to <bug-libtool@gnu.org>."
-
-lt_cl_version="\
-m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
-m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
-configured by $[0], generated by m4_PACKAGE_STRING.
-
-Copyright (C) 2008 Free Software Foundation, Inc.
-This config.lt script is free software; the Free Software Foundation
-gives unlimited permision to copy, distribute and modify it."
-
-while test $[#] != 0
-do
-  case $[1] in
-    --version | --v* | -V )
-      echo "$lt_cl_version"; exit 0 ;;
-    --help | --h* | -h )
-      echo "$lt_cl_help"; exit 0 ;;
-    --debug | --d* | -d )
-      debug=: ;;
-    --quiet | --q* | --silent | --s* | -q )
-      lt_cl_silent=: ;;
-
-    -*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
-
-    *) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
-  esac
-  shift
-done
-
-if $lt_cl_silent; then
-  exec AS_MESSAGE_FD>/dev/null
-fi
-_LTEOF
-
-cat >>"$CONFIG_LT" <<_LTEOF
-_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-AC_MSG_NOTICE([creating $ofile])
-_LT_OUTPUT_LIBTOOL_COMMANDS
-AS_EXIT(0)
-_LTEOF
-chmod +x "$CONFIG_LT"
-
-# configure is writing to config.log, but config.lt does its own redirection,
-# appending to config.log, which fails on DOS, as config.log is still kept
-# open by configure.  Here we exec the FD to /dev/null, effectively closing
-# config.log, so it can be properly (re)opened and appended to by config.lt.
-if test "$no_create" != yes; then
-  lt_cl_success=:
-  test "$silent" = yes &&
-    lt_config_lt_args="$lt_config_lt_args --quiet"
-  exec AS_MESSAGE_LOG_FD>/dev/null
-  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-  exec AS_MESSAGE_LOG_FD>>config.log
-  $lt_cl_success || AS_EXIT(1)
-fi
-])# LT_OUTPUT
-
-
-# _LT_CONFIG(TAG)
-# ---------------
-# If TAG is the built-in tag, create an initial libtool script with a
-# default configuration from the untagged config vars.  Otherwise add code
-# to config.status for appending the configuration named by TAG from the
-# matching tagged config vars.
-m4_defun([_LT_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_CONFIG_SAVE_COMMANDS([
-  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
-  m4_if(_LT_TAG, [C], [
-    # See if we are running on zsh, and set the options which allow our
-    # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
-      setopt NO_GLOB_SUBST
-    fi
-
-    cfgfile="${ofile}T"
-    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
-    $RM "$cfgfile"
-
-    cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-_LT_COPYING
-_LT_LIBTOOL_TAGS
-
-# ### BEGIN LIBTOOL CONFIG
-_LT_LIBTOOL_CONFIG_VARS
-_LT_LIBTOOL_TAG_VARS
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
-  case $host_os in
-  aix3*)
-    cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-_LT_EOF
-    ;;
-  esac
-
-  _LT_PROG_LTMAIN
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  _LT_PROG_XSI_SHELLFNS
-
-  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" ||
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-],
-[cat <<_LT_EOF >> "$ofile"
-
-dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
-dnl in a comment (ie after a #).
-# ### BEGIN LIBTOOL TAG CONFIG: $1
-_LT_LIBTOOL_TAG_VARS(_LT_TAG)
-# ### END LIBTOOL TAG CONFIG: $1
-_LT_EOF
-])dnl /m4_if
-],
-[m4_if([$1], [], [
-    PACKAGE='$PACKAGE'
-    VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
-    RM='$RM'
-    ofile='$ofile'], [])
-])dnl /_LT_CONFIG_SAVE_COMMANDS
-])# _LT_CONFIG
-
-
-# LT_SUPPORTED_TAG(TAG)
-# ---------------------
-# Trace this macro to discover what tags are supported by the libtool
-# --tag option, using:
-#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
-AC_DEFUN([LT_SUPPORTED_TAG], [])
-
-
-# C support is built-in for now
-m4_define([_LT_LANG_C_enabled], [])
-m4_define([_LT_TAGS], [])
-
-
-# LT_LANG(LANG)
-# -------------
-# Enable libtool support for the given language if not already enabled.
-AC_DEFUN([LT_LANG],
-[AC_BEFORE([$0], [LT_OUTPUT])dnl
-m4_case([$1],
-  [C],			[_LT_LANG(C)],
-  [C++],		[_LT_LANG(CXX)],
-  [Java],		[_LT_LANG(GCJ)],
-  [Fortran 77],		[_LT_LANG(F77)],
-  [Fortran],		[_LT_LANG(FC)],
-  [Windows Resource],	[_LT_LANG(RC)],
-  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
-    [_LT_LANG($1)],
-    [m4_fatal([$0: unsupported language: "$1"])])])dnl
-])# LT_LANG
-
-
-# _LT_LANG(LANGNAME)
-# ------------------
-m4_defun([_LT_LANG],
-[m4_ifdef([_LT_LANG_]$1[_enabled], [],
-  [LT_SUPPORTED_TAG([$1])dnl
-  m4_append([_LT_TAGS], [$1 ])dnl
-  m4_define([_LT_LANG_]$1[_enabled], [])dnl
-  _LT_LANG_$1_CONFIG($1)])dnl
-])# _LT_LANG
-
-
-# _LT_LANG_DEFAULT_CONFIG
-# -----------------------
-m4_defun([_LT_LANG_DEFAULT_CONFIG],
-[AC_PROVIDE_IFELSE([AC_PROG_CXX],
-  [LT_LANG(CXX)],
-  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_F77],
-  [LT_LANG(F77)],
-  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_FC],
-  [LT_LANG(FC)],
-  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
-
-dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
-dnl pulling things in needlessly.
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-  [LT_LANG(GCJ)],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-    [LT_LANG(GCJ)],
-    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
-      [LT_LANG(GCJ)],
-      [m4_ifdef([AC_PROG_GCJ],
-	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
-       m4_ifdef([A][M_PROG_GCJ],
-	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
-       m4_ifdef([LT_PROG_GCJ],
-	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
-
-AC_PROVIDE_IFELSE([LT_PROG_RC],
-  [LT_LANG(RC)],
-  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
-])# _LT_LANG_DEFAULT_CONFIG
-
-# Obsolete macros:
-AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
-AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
-AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
-AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
-dnl AC_DEFUN([AC_LIBTOOL_F77], [])
-dnl AC_DEFUN([AC_LIBTOOL_FC], [])
-dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
-
-
-# _LT_TAG_COMPILER
-# ----------------
-m4_defun([_LT_TAG_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
-_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
-_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
-_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_TAG_COMPILER
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-m4_defun([_LT_COMPILER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-m4_defun([_LT_LINKER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
-])# _LT_LINKER_BOILERPLATE
-
-# _LT_REQUIRED_DARWIN_CHECKS
-# -------------------------
-m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
-  case $host_os in
-    rhapsody* | darwin*)
-    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
-    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
-    AC_CHECK_TOOL([LIPO], [lipo], [:])
-    AC_CHECK_TOOL([OTOOL], [otool], [:])
-    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
-    _LT_DECL([], [DSYMUTIL], [1],
-      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
-    _LT_DECL([], [NMEDIT], [1],
-      [Tool to change global to local symbols on Mac OS X])
-    _LT_DECL([], [LIPO], [1],
-      [Tool to manipulate fat objects and archives on Mac OS X])
-    _LT_DECL([], [OTOOL], [1],
-      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
-    _LT_DECL([], [OTOOL64], [1],
-      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
-
-    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
-      [lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
-	# By default we will add the -single_module flag. You can override
-	# by either setting the environment variable LT_MULTI_MODULE
-	# non-empty at configure time, or by adding -multi_module to the
-	# link flags.
-	rm -rf libconftest.dylib*
-	echo "int foo(void){return 1;}" > conftest.c
-	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
-	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
-        _lt_result=$?
-	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
-	  lt_cv_apple_cc_single_mod=yes
-	else
-	  cat conftest.err >&AS_MESSAGE_LOG_FD
-	fi
-	rm -rf libconftest.dylib*
-	rm -f conftest.*
-      fi])
-    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
-      [lt_cv_ld_exported_symbols_list],
-      [lt_cv_ld_exported_symbols_list=no
-      save_LDFLAGS=$LDFLAGS
-      echo "_main" > conftest.sym
-      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-	[lt_cv_ld_exported_symbols_list=yes],
-	[lt_cv_ld_exported_symbols_list=no])
-	LDFLAGS="$save_LDFLAGS"
-    ])
-    case $host_os in
-    rhapsody* | darwin1.[[012]])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-    darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*) # darwin 5.x on
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-	10.[[012]]*)
-	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-	10.*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-      esac
-    ;;
-  esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-      _lt_dar_single_mod='$single_module'
-    fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-    else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    fi
-    if test "$DSYMUTIL" != ":"; then
-      _lt_dsymutil='~$DSYMUTIL $lib || :'
-    else
-      _lt_dsymutil=
-    fi
-    ;;
-  esac
-])
-
-
-# _LT_DARWIN_LINKER_FEATURES
-# --------------------------
-# Checks for linker and compiler features on darwin
-m4_defun([_LT_DARWIN_LINKER_FEATURES],
-[
-  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
-  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-  _LT_TAGVAR(hardcode_direct, $1)=no
-  _LT_TAGVAR(hardcode_automatic, $1)=yes
-  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
-  _LT_TAGVAR(link_all_deplibs, $1)=yes
-  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
-  case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
-     *) _lt_dar_can_shared=$GCC ;;
-  esac
-  if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=echo
-    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    m4_if([$1], [CXX],
-[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-    fi
-],[])
-  else
-  _LT_TAGVAR(ld_shlibs, $1)=no
-  fi
-])
-
-# _LT_SYS_MODULE_PATH_AIX
-# -----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-m4_defun([_LT_SYS_MODULE_PATH_AIX],
-[m4_require([_LT_DECL_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_SYS_MODULE_PATH_AIX
-
-
-# _LT_SHELL_INIT(ARG)
-# -------------------
-m4_define([_LT_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
-	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-	 [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_SHELL_INIT
-
-
-# _LT_PROG_ECHO_BACKSLASH
-# -----------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[_LT_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$lt_ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-  ;;
-esac
-
-ECHO=${lt_ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X[$]1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<_LT_EOF
-[$]*
-_LT_EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
-  if test "X${echo_test_string+set}" != Xset; then
-    # find a string as large as possible, as long as the shell can cope with it
-    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
-	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
-      then
-        break
-      fi
-    done
-  fi
-
-  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-     test "X$echo_testing_string" = "X$echo_test_string"; then
-    :
-  else
-    # The Solaris, AIX, and Digital Unix default echo programs unquote
-    # backslashes.  This makes it impossible to quote backslashes using
-    #   echo "$something" | sed 's/\\/\\\\/g'
-    #
-    # So, first we look for a working echo in the user's PATH.
-
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for dir in $PATH /usr/ucb; do
-      IFS="$lt_save_ifs"
-      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        ECHO="$dir/echo"
-        break
-      fi
-    done
-    IFS="$lt_save_ifs"
-
-    if test "X$ECHO" = Xecho; then
-      # We didn't find a better echo, so look for alternatives.
-      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        # This shell has a builtin print -r that does the trick.
-        ECHO='print -r'
-      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
-	   test "X$CONFIG_SHELL" != X/bin/ksh; then
-        # If we have ksh, try running configure again with it.
-        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-        export ORIGINAL_CONFIG_SHELL
-        CONFIG_SHELL=/bin/ksh
-        export CONFIG_SHELL
-        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-      else
-        # Try using printf.
-        ECHO='printf %s\n'
-        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	  # Cool, printf works
-	  :
-        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	  export CONFIG_SHELL
-	  SHELL="$CONFIG_SHELL"
-	  export SHELL
-	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
-        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
-        else
-	  # maybe with a smaller string...
-	  prev=:
-
-	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
-	    then
-	      break
-	    fi
-	    prev="$cmd"
-	  done
-
-	  if test "$prev" != 'sed 50q "[$]0"'; then
-	    echo_test_string=`eval $prev`
-	    export echo_test_string
-	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	  else
-	    # Oops.  We lost completely, so just stick with echo.
-	    ECHO=echo
-	  fi
-        fi
-      fi
-    fi
-  fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(lt_ECHO)
-])
-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1],
-    [An echo program that does not interpret backslashes])
-])# _LT_PROG_ECHO_BACKSLASH
-
-
-# _LT_ENABLE_LOCK
-# ---------------
-m4_defun([_LT_ENABLE_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
-  [AS_HELP_STRING([--disable-libtool-lock],
-    [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-      *ELF-32*)
-	HPUX_IA64_MODE="32"
-	;;
-      *ELF-64*)
-	HPUX_IA64_MODE="64"
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -melf32bsmip"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -melf32bmipn32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -melf64bmip"
-	;;
-      esac
-    else
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -32"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -n32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -64"
-	  ;;
-      esac
-    fi
-  fi
-  rm -rf conftest*
-  ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-      *32-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_i386_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
-	    ;;
-	  ppc64-*linux*|powerpc64-*linux*)
-	    LD="${LD-ld} -m elf32ppclinux"
-	    ;;
-	  s390x-*linux*)
-	    LD="${LD-ld} -m elf_s390"
-	    ;;
-	  sparc64-*linux*)
-	    LD="${LD-ld} -m elf32_sparc"
-	    ;;
-	esac
-	;;
-      *64-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_x86_64_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_x86_64"
-	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
-	    LD="${LD-ld} -m elf64ppc"
-	    ;;
-	  s390*-*linux*|s390*-*tpf*)
-	    LD="${LD-ld} -m elf64_s390"
-	    ;;
-	  sparc*-*linux*)
-	    LD="${LD-ld} -m elf64_sparc"
-	    ;;
-	esac
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_PUSH(C)
-     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_POP])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-sparc*-*solaris*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-    *64-bit*)
-      case $lt_cv_prog_gnu_ld in
-      yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)
-	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-	  LD="${LD-ld} -64"
-	fi
-	;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-esac
-
-need_locks="$enable_libtool_lock"
-])# _LT_ENABLE_LOCK
-
-
-# _LT_CMD_OLD_ARCHIVE
-# -------------------
-m4_defun([_LT_CMD_OLD_ARCHIVE],
-[AC_CHECK_TOOL(AR, ar, false)
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1])
-
-AC_CHECK_TOOL(STRIP, strip, :)
-test -z "$STRIP" && STRIP=:
-_LT_DECL([], [STRIP], [1], [A symbol stripping program])
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-test -z "$RANLIB" && RANLIB=:
-_LT_DECL([], [RANLIB], [1],
-    [Commands used to install an old-style archive])
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-_LT_DECL([], [old_postinstall_cmds], [2])
-_LT_DECL([], [old_postuninstall_cmds], [2])
-_LT_TAGDECL([], [old_archive_cmds], [2],
-    [Commands used to build an old-style archive])
-])# _LT_CMD_OLD_ARCHIVE
-
-
-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([_LT_COMPILER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$3"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       $2=yes
-     fi
-   fi
-   $RM conftest*
-])
-
-if test x"[$]$2" = xyes; then
-    m4_if([$5], , :, [$5])
-else
-    m4_if([$6], , :, [$6])
-fi
-])# _LT_COMPILER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
-
-
-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                  [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------
-# Check whether the given linker option works
-AC_DEFUN([_LT_LINKER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $3"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         $2=yes
-       fi
-     else
-       $2=yes
-     fi
-   fi
-   $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    m4_if([$4], , :, [$4])
-else
-    m4_if([$5], , :, [$5])
-fi
-])# _LT_LINKER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
-
-
-# LT_CMD_MAX_LEN
-#---------------
-AC_DEFUN([LT_CMD_MAX_LEN],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-  i=0
-  teststring="ABCD"
-
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  cygwin* | mingw* | cegcc*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
-
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
-
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      # Make teststring a little bigger before we do anything with it.
-      # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
-        teststring=$teststring$teststring
-      done
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      # If test is not a shell built-in, we'll probably end up computing a
-      # maximum length that is only half of the actual maximum length, but
-      # we can't tell.
-      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
-	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
-	      test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      # Only check the string length outside the loop.
-      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on
-      # massive amounts of additional arguments before passing them to the
-      # linker.  It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
-    ;;
-  esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
-  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
-  AC_MSG_RESULT(none)
-fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-_LT_DECL([], [max_cmd_len], [0],
-    [What is the maximum length of a command?])
-])# LT_CMD_MAX_LEN
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
-
-
-# _LT_HEADER_DLFCN
-# ----------------
-m4_defun([_LT_HEADER_DLFCN],
-[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
-])# _LT_HEADER_DLFCN
-
-
-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ----------------------------------------------------------------
-m4_defun([_LT_TRY_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<_LT_EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-  return status;
-}]
-_LT_EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_dlunknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_TRY_DLOPEN_SELF
-
-
-# LT_SYS_DLOPEN_SELF
-# ------------------
-AC_DEFUN([LT_SYS_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-    ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-    ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ])
-    ;;
-
-  *)
-    AC_CHECK_FUNC([shl_load],
-	  [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
-	[AC_CHECK_FUNC([dlopen],
-	      [lt_cv_dlopen="dlopen"],
-	  [AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-	    [AC_CHECK_LIB([svld], [dlopen],
-		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
-	      ])
-	    ])
-	  ])
-	])
-      ])
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-	  lt_cv_dlopen_self, [dnl
-	  _LT_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-	  lt_cv_dlopen_self_static, [dnl
-	  _LT_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-_LT_DECL([dlopen_support], [enable_dlopen], [0],
-	 [Whether dlopen is supported])
-_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
-	 [Whether dlopen of programs is supported])
-_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
-	 [Whether dlopen of statically linked programs is supported])
-])# LT_SYS_DLOPEN_SELF
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
-
-
-# _LT_COMPILER_C_O([TAGNAME])
-# ---------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler.
-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
-m4_defun([_LT_COMPILER_C_O],
-[m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $RM -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-     fi
-   fi
-   chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $RM conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-   $RM out/* && rmdir out
-   cd ..
-   $RM -r conftest
-   $RM conftest*
-])
-_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
-	[Does compiler simultaneously support -c and -o options?])
-])# _LT_COMPILER_C_O
-
-
-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
-# ----------------------------------
-# Check to see if we can do hard links to lock some files if needed
-m4_defun([_LT_COMPILER_FILE_LOCKS],
-[m4_require([_LT_ENABLE_LOCK])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_COMPILER_C_O([$1])
-
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $RM conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
-])# _LT_COMPILER_FILE_LOCKS
-
-
-# _LT_CHECK_OBJDIR
-# ----------------
-m4_defun([_LT_CHECK_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-_LT_DECL([], [objdir], [0],
-         [The name of the directory that contains temporary libtool files])dnl
-m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
-  [Define to the sub-directory in which libtool stores uninstalled libraries.])
-])# _LT_CHECK_OBJDIR
-
-
-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
-# --------------------------------------
-# Check hardcoding attributes.
-m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
-   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
-   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
-  # We can hardcode non-existent directories.
-  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
-    # Linking always hardcodes the temporary library directory.
-    _LT_TAGVAR(hardcode_action, $1)=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_TAGVAR(hardcode_action, $1)=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  _LT_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
-   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-_LT_TAGDECL([], [hardcode_action], [0],
-    [How to hardcode a shared library path into an executable])
-])# _LT_LINKER_HARDCODE_LIBPATH
-
-
-# _LT_CMD_STRIPLIB
-# ----------------
-m4_defun([_LT_CMD_STRIPLIB],
-[m4_require([_LT_DECL_EGREP])
-striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-  darwin*)
-    if test -n "$STRIP" ; then
-      striplib="$STRIP -x"
-      old_striplib="$STRIP -S"
-      AC_MSG_RESULT([yes])
-    else
-      AC_MSG_RESULT([no])
-    fi
-    ;;
-  *)
-    AC_MSG_RESULT([no])
-    ;;
-  esac
-fi
-_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
-_LT_DECL([], [striplib], [1])
-])# _LT_CMD_STRIPLIB
-
-
-# _LT_SYS_DYNAMIC_LINKER([TAG])
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-m4_defun([_LT_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_OBJDUMP])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-m4_if([$1],
-	[], [
-if test "$GCC" = yes; then
-  case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-  # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
-  lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-  for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
-      test -d "$lt_sys_path" && \
-	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-    fi
-  done
-  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
-  for (lt_i = NF; lt_i > 0; lt_i--) {
-    if ($lt_i != "" && $lt_i != ".") {
-      if ($lt_i == "..") {
-        lt_count++;
-      } else {
-        if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
-        } else {
-          lt_count--;
-        }
-      }
-    }
-  }
-  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
-  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
-  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[[4-9]]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  case $host_cpu in
-  powerpc)
-    # Since July 2007 AmigaOS4 officially supports .so libraries.
-    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    ;;
-  m68k)
-    library_names_spec='$libname.ixlibrary $libname.a'
-    # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-    ;;
-  esac
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[[45]]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32* | cegcc*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname~
-      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
-        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
-      fi'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw* | cegcc*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-m4_if([$1], [],[
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[[123]]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
-  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  hppa*64*)
-    shrext_cmds='.sl'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix[[3-9]]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # Some binutils ld are patched to set DT_RUNPATH
-  save_LDFLAGS=$LDFLAGS
-  save_libdir=$libdir
-  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
-       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
-  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
-       [shlibpath_overrides_runpath=yes])])
-  LDFLAGS=$save_LDFLAGS
-  libdir=$save_libdir
-
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-*nto* | *qnx*)
-  version_type=qnx
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='ldqnx.so'
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[[89]] | openbsd2.[[89]].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-tpf*)
-  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-fi
-
-_LT_DECL([], [variables_saved_for_relink], [1],
-    [Variables whose values should be saved in libtool wrapper scripts and
-    restored at link time])
-_LT_DECL([], [need_lib_prefix], [0],
-    [Do we need the "lib" prefix for modules?])
-_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
-_LT_DECL([], [version_type], [0], [Library versioning type])
-_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
-_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
-_LT_DECL([], [shlibpath_overrides_runpath], [0],
-    [Is shlibpath searched before the hard-coded library search path?])
-_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
-_LT_DECL([], [library_names_spec], [1],
-    [[List of archive names.  First name is the real one, the rest are links.
-    The last name is the one that the linker finds with -lNAME]])
-_LT_DECL([], [soname_spec], [1],
-    [[The coded name of the library, if different from the real name]])
-_LT_DECL([], [postinstall_cmds], [2],
-    [Command to use after installation of a shared archive])
-_LT_DECL([], [postuninstall_cmds], [2],
-    [Command to use after uninstallation of a shared archive])
-_LT_DECL([], [finish_cmds], [2],
-    [Commands used to finish a libtool library installation in a directory])
-_LT_DECL([], [finish_eval], [1],
-    [[As "finish_cmds", except a single script fragment to be evaled but
-    not shown]])
-_LT_DECL([], [hardcode_into_libs], [0],
-    [Whether we should hardcode library paths into libraries])
-_LT_DECL([], [sys_lib_search_path_spec], [2],
-    [Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
-    [Run-time system search path for libraries])
-])# _LT_SYS_DYNAMIC_LINKER
-
-
-# _LT_PATH_TOOL_PREFIX(TOOL)
-# --------------------------
-# find a file program which can recognize shared library
-AC_DEFUN([_LT_PATH_TOOL_PREFIX],
-[m4_require([_LT_DECL_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] |  ?:[\\/]*])
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="m4_if([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    $EGREP "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-_LT_DECL([], [MAGIC_CMD], [0],
-	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
-])# _LT_PATH_TOOL_PREFIX
-
-# Old name:
-AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
-
-
-# _LT_PATH_MAGIC
-# --------------
-# find a file program which can recognize a shared library
-m4_defun([_LT_PATH_MAGIC],
-[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])# _LT_PATH_MAGIC
-
-
-# LT_PATH_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([LT_PATH_LD],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-
-AC_ARG_WITH([gnu-ld],
-    [AS_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])dnl
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by $CC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | ?:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
-      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-_LT_PATH_LD_GNU
-AC_SUBST([LD])
-
-_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
-])# LT_PATH_LD
-
-# Old names:
-AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
-AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_LD], [])
-dnl AC_DEFUN([AC_PROG_LD], [])
-
-
-# _LT_PATH_LD_GNU
-#- --------------
-m4_defun([_LT_PATH_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# _LT_PATH_LD_GNU
-
-
-# _LT_CMD_RELOAD
-# --------------
-# find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-m4_defun([_LT_CMD_RELOAD],
-[AC_CACHE_CHECK([for $LD option to reload object files],
-  lt_cv_ld_reload_flag,
-  [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_DECL([], [reload_cmds], [2])dnl
-])# _LT_CMD_RELOAD
-
-
-# _LT_CHECK_MAGIC_METHOD
-# ----------------------
-# how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-m4_defun([_LT_CHECK_MAGIC_METHOD],
-[m4_require([_LT_DECL_EGREP])
-m4_require([_LT_DECL_OBJDUMP])
-AC_CACHE_CHECK([how to recognize dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[[4-9]]*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi[[45]]*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
-  ;;
-
-mingw* | pw32*)
-  # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-  # unless we find 'file', for example because we are cross-compiling.
-  if ( file / ) >/dev/null 2>&1; then
-    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-    lt_cv_file_magic_cmd='func_win32_libid'
-  else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-    lt_cv_file_magic_cmd='$OBJDUMP -f'
-  fi
-  ;;
-
-cegcc)
-  # use the weaker test based on 'objdump'. See mingw*.
-  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  case $host_cpu in
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  hppa*64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-    ;;
-  *)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  esac
-  ;;
-
-interix[[3-9]]*)
-  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $LD in
-  *-32|*"-32 ") libmagic=32-bit;;
-  *-n32|*"-n32 ") libmagic=N32;;
-  *-64|*"-64 ") libmagic=64-bit;;
-  *) libmagic=never-match;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-*nto* | *qnx*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-rdos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.3*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  pc)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  esac
-  ;;
-
-tpf*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-_LT_DECL([], [deplibs_check_method], [1],
-    [Method to check whether dependent libraries are shared objects])
-_LT_DECL([], [file_magic_cmd], [1],
-    [Command to use when deplibs_check_method == "file_magic"])
-])# _LT_CHECK_MAGIC_METHOD
-
-
-# LT_PATH_NM
-# ----------
-# find the pathname to a BSD- or MS-compatible name lister
-AC_DEFUN([LT_PATH_NM],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-	#   nm: unknown option "B" ignored
-	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
-	  lt_cv_path_NM="$tmp_nm -B"
-	  break
-	  ;;
-	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	  */dev/null*)
-	    lt_cv_path_NM="$tmp_nm -p"
-	    break
-	    ;;
-	  *)
-	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	    continue # so that we can try to find one that supports BSD flags
-	    ;;
-	  esac
-	  ;;
-	esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi])
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
-else
-  # Didn't find any BSD compatible name lister, look for dumpbin.
-  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
-  AC_SUBST([DUMPBIN])
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
-  fi
-fi
-test -z "$NM" && NM=nm
-AC_SUBST([NM])
-_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
-
-AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
-  [lt_cv_nm_interface="BSD nm"
-  echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
-  (eval "$ac_compile" 2>conftest.err)
-  cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
-  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
-  cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
-  cat conftest.out >&AS_MESSAGE_LOG_FD
-  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
-    lt_cv_nm_interface="MS dumpbin"
-  fi
-  rm -f conftest*])
-])# LT_PATH_NM
-
-# Old names:
-AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
-AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_NM], [])
-dnl AC_DEFUN([AC_PROG_NM], [])
-
-
-# LT_LIB_M
-# --------
-# check for math library
-AC_DEFUN([LT_LIB_M],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-  # These system don't have libm, or don't need it
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, cos, LIBM="-lm")
-  ;;
-esac
-AC_SUBST([LIBM])
-])# LT_LIB_M
-
-# Old name:
-AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_CHECK_LIBM], [])
-
-
-# _LT_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------
-m4_defun([_LT_COMPILER_NO_RTTI],
-[m4_require([_LT_TAG_COMPILER])dnl
-
-_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
-  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
-  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-    lt_cv_prog_compiler_rtti_exceptions,
-    [-fno-rtti -fno-exceptions], [],
-    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
-	[Compiler flag to turn off builtin functions])
-])# _LT_COMPILER_NO_RTTI
-
-
-# _LT_CMD_GLOBAL_SYMBOLS
-# ----------------------
-m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32* | cegcc*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*)
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDEGRST]]'
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[[BCDEGRST]]'
-  ;;
-osf*)
-  symcode='[[BCDEGQRST]]'
-  ;;
-solaris*)
-  symcode='[[BDRT]]'
-  ;;
-sco3.2v5*)
-  symcode='[[DT]]'
-  ;;
-sysv4.2uw2*)
-  symcode='[[DT]]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[[ABDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
-
-  # Write the raw and C identifiers.
-  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
-    # Also find C++ and __fastcall symbols from MSVC++,
-    # which start with @ or ?.
-    lt_cv_sys_global_symbol_pipe="$AWK ['"\
-"     {last_section=section; section=\$ 3};"\
-"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-"     \$ 0!~/External *\|/{next};"\
-"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-"     {if(hide[section]) next};"\
-"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
-"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-"     ' prfx=^$ac_symprfx]"
-  else
-    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-  fi
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
-	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<_LT_EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-_LT_EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
-
-	  cat <<_LT_EOF >> conftest.$ac_ext
-
-/* The mapping between symbol names and symbols.  */
-const struct {
-  const char *name;
-  void       *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[[]] =
-{
-  { "@PROGRAM@", (void *) 0 },
-_LT_EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
-	  cat <<\_LT_EOF >> conftest.$ac_ext
-  {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-    fi
-  else
-    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  AC_MSG_RESULT(failed)
-else
-  AC_MSG_RESULT(ok)
-fi
-
-_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
-    [Take the output of nm and produce a listing of raw symbols and C names])
-_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
-    [Transform the output of nm in a proper C declaration])
-_LT_DECL([global_symbol_to_c_name_address],
-    [lt_cv_sys_global_symbol_to_c_name_address], [1],
-    [Transform the output of nm in a C name address pair])
-_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
-    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
-    [Transform the output of nm in a C name address pair when lib prefix is needed])
-]) # _LT_CMD_GLOBAL_SYMBOLS
-
-
-# _LT_COMPILER_PIC([TAGNAME])
-# ---------------------------
-m4_defun([_LT_COMPILER_PIC],
-[m4_require([_LT_TAG_COMPILER])dnl
-_LT_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
-m4_if([$1], [CXX], [
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-        ;;
-      m68k)
-            # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-        ;;
-      esac
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | cygwin* | os2* | pw32* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-      ;;
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-      # sets the default TLS model and affects inlining.
-      case $host_cpu in
-      hppa*64*)
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
-    *qnx* | *nto*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-    *)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix[[4-9]]*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	else
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68*)
-	  # Green Hills C++ Compiler
-	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-      dgux*)
-	case $cc_basename in
-	  ec++*)
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  ghcx*)
-	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd* | dragonfly*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
-	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	    fi
-	    ;;
-	  aCC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    case $host_cpu in
-	    hppa*64*|ia64*)
-	      # +Z the default
-	      ;;
-	    *)
-	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	      ;;
-	    esac
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      interix*)
-	# This is c89, which is MS Visual C++ (no shared libs)
-	# Anyone wants to do a port?
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux* | k*bsd*-gnu)
-	case $cc_basename in
-	  KCC*)
-	    # KAI C++ Compiler
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  ecpc* )
-	    # old Intel C++ for x86_64 which still supported -KPIC.
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  icpc* )
-	    # Intel C++, used to be incompatible with GCC.
-	    # ICC 10 doesn't accept -KPIC any more.
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  pgCC* | pgcpp*)
-	    # Portland Group C++ compiler
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  cxx*)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  xlc* | xlC*)
-	    # IBM XL 8.0 on PPC
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
-	    ;;
-	  *)
-	    case `$CC -V 2>&1 | sed 5q` in
-	    *Sun\ C*)
-	      # Sun C++ 5.9
-	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	      ;;
-	    esac
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx*)
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd*)
-	;;
-      *qnx* | *nto*)
-        # QNX uses GNU C++, but need to define -shared option too, otherwise
-        # it will coredump.
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-        ;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    ;;
-	  RCC*)
-	    # Rational C++ 2.4.1
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  cxx*)
-	    # Digital/Compaq C++
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	    ;;
-	  gcx*)
-	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.x
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  lcc*)
-	    # Lucid
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC*)
-	    # NonStop-UX NCC 3.20
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      vxworks*)
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-	;;
-    esac
-  fi
-],
-[
-  if test "$GCC" = yes; then
-    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-        ;;
-      m68k)
-            # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-        ;;
-      esac
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-
-    hpux*)
-      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-      # sets the default TLS model and affects inlining.
-      case $host_cpu in
-      hppa*64*)
-	# +Z the default
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
-
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      enable_shared=no
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-
-    *)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      else
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      m4_if([$1], [GCJ], [],
-	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC (with -KPIC) is the default.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
-      ecc*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      # icc used to be incompatible with GCC.
-      # ICC 10 doesn't accept -KPIC any more.
-      icc* | ifort*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      # Lahey Fortran 8.1.
-      lf95*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
-	;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-        ;;
-      ccc*)
-        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        # All Alpha code is PIC.
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-        ;;
-      xl*)
-	# IBM XL C 8.0/Fortran 10.1 on PPC
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
-	;;
-      *)
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C 5.9
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
-	  ;;
-	esac
-	;;
-      esac
-      ;;
-
-    newsos6)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-
-    osf3* | osf4* | osf5*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # All OSF/1 code is PIC.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    rdos*)
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    solaris*)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    unicos*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-
-    uts4*)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *)
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-    esac
-  fi
-])
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-    ;;
-  *)
-    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
-    ;;
-esac
-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
-	[How to pass a linker flag through the compiler])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
-    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
-    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
-    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
-	[Additional compiler flags for building library objects])
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
-_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
-  $lt_tmp_static_flag,
-  [],
-  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
-_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
-	[Compiler flag to prevent dynamic linking])
-])# _LT_COMPILER_PIC
-
-
-# _LT_LINKER_SHLIBS([TAGNAME])
-# ----------------------------
-# See if the linker supports building shared libraries.
-m4_defun([_LT_LINKER_SHLIBS],
-[AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-m4_if([$1], [CXX], [
-  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix[[4-9]]*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-    else
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-  ;;
-  cygwin* | mingw* | cegcc*)
-    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  *)
-    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-], [
-  runpath_var=
-  _LT_TAGVAR(allow_undefined_flag, $1)=
-  _LT_TAGVAR(always_export_symbols, $1)=no
-  _LT_TAGVAR(archive_cmds, $1)=
-  _LT_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_TAGVAR(compiler_needs_object, $1)=no
-  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  _LT_TAGVAR(hardcode_automatic, $1)=no
-  _LT_TAGVAR(hardcode_direct, $1)=no
-  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
-  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-  _LT_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_TAGVAR(inherit_rpath, $1)=no
-  _LT_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_TAGVAR(module_cmds, $1)=
-  _LT_TAGVAR(module_expsym_cmds, $1)=
-  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
-  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_TAGVAR(whole_archive_flag_spec, $1)=
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  _LT_TAGVAR(include_expsyms, $1)=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-dnl Note also adjust exclude_expsyms for C++ above.
-  extract_expsyms_cmds=
-
-  case $host_os in
-  cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  _LT_TAGVAR(ld_shlibs, $1)=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>&1` in
-      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[[3-9]]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-_LT_EOF
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            _LT_TAGVAR(archive_expsym_cmds, $1)=''
-        ;;
-      m68k)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes
-        ;;
-      esac
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-      # as there is no search path for DLLs.
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(always_export_symbols, $1)=no
-      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    interix[[3-9]]*)
-      _LT_TAGVAR(hardcode_direct, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
-
-    gnu* | linux* | tpf* | k*bsd*-gnu)
-      tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
-	case $cc_basename in
-	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
-	esac
-      fi
-      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-	 && test "$tmp_diet" = no
-      then
-	tmp_addflag=
-	tmp_sharedflag='-shared'
-	case $cc_basename,$host_cpu in
-        pgcc*)				# Portland Group C compiler
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	lf95*)				# Lahey Fortran 8.1
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
-	  tmp_sharedflag='--shared' ;;
-	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
-	  tmp_sharedflag='-qmkshrobj'
-	  tmp_addflag= ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-	  _LT_TAGVAR(compiler_needs_object, $1)=yes
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	esac
-	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-        if test "x$supports_anon_versioning" = xyes; then
-          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	    echo "local: *; };" >> $output_objdir/$libname.ver~
-	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-        fi
-
-	case $cc_basename in
-	xlf*)
-	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
-	  if test "x$supports_anon_versioning" = xyes; then
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-	  fi
-	  ;;
-	esac
-      else
-        _LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-	;;
-	*)
-	  # For security reasons, it is highly recommended that you always
-	  # use absolute paths for naming shared libraries, and exclude the
-	  # DT_RUNPATH tag from executables and libraries.  But doing so
-	  # requires that you compile everything twice, which is a pain.
-	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  else
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	  fi
-	;;
-      esac
-      ;;
-
-    sunos4*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-
-    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
-      runpath_var=
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
-      _LT_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(always_export_symbols, $1)=yes
-      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	_LT_TAGVAR(hardcode_direct, $1)=unsupported
-      fi
-      ;;
-
-    aix[[4-9]]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-	else
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-	  for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-	    aix_use_runtimelinking=yes
-	    break
-	  fi
-	  done
-	  ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      _LT_TAGVAR(archive_cmds, $1)=''
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[[012]]|aix4.[[012]].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" &&
-	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-	  then
-	  # We have reworked collect2
-	  :
-	  else
-	  # We have old collect2
-	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
-
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      _LT_TAGVAR(always_export_symbols, $1)=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
-        # Determine the default libpath from the value encoded in an
-        # empty executable.
-        _LT_SYS_MODULE_PATH_AIX
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-      else
-	if test "$host_cpu" = ia64; then
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an
-	 # empty executable.
-	 _LT_SYS_MODULE_PATH_AIX
-	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            _LT_TAGVAR(archive_expsym_cmds, $1)=''
-        ;;
-      m68k)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes
-        ;;
-      esac
-      ;;
-
-    bsdi[[45]]*)
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-      # FIXME: Should let the user specify the lib program.
-      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      ;;
-
-    darwin* | rhapsody*)
-      _LT_DARWIN_LINKER_FEATURES($1)
-      ;;
-
-    dgux*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    freebsd1*)
-      _LT_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
-	_LT_TAGVAR(hardcode_direct, $1)=yes
-	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	_LT_TAGVAR(hardcode_minus_L, $1)=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  _LT_TAGVAR(hardcode_direct, $1)=no
-	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	  ;;
-	*)
-	  _LT_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	# Try to use the -exported_symbol ld option, if it does not
-	# work, assume that -exports_file does not work either and
-	# implicitly export all symbols.
-        save_LDFLAGS="$LDFLAGS"
-        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-        AC_LINK_IFELSE(int foo(void) {},
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-        )
-        LDFLAGS="$save_LDFLAGS"
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(inherit_rpath, $1)=yes
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    newsos6)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *nto* | *qnx*)
-      ;;
-
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	_LT_TAGVAR(hardcode_direct, $1)=yes
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	     ;;
-	   *)
-	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-	fi
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    os2*)
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      else
-	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    solaris*)
-      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-      else
-	case `$CC -V 2>&1` in
-	*"Compilers 5.0"*)
-	  wlarc=''
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
-	  ;;
-	*)
-	  wlarc='${wl}'
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-	  ;;
-	esac
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      case $host_os in
-      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
-	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-	fi
-	;;
-      esac
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-	  _LT_TAGVAR(hardcode_direct, $1)=no
-        ;;
-	motorola)
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4.3*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	_LT_TAGVAR(ld_shlibs, $1)=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      _LT_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    esac
-
-    if test x$host_vendor = xsni; then
-      case $host in
-      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
-	;;
-      esac
-    fi
-  fi
-])
-AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
-
-_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
-_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
-_LT_DECL([], [extract_expsyms_cmds], [2],
-    [The commands to extract the exported symbol list from a shared archive])
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
-  # Assume -lc should be added
-  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $_LT_TAGVAR(archive_cmds, $1) in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-      $RM conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
-	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
-        _LT_TAGVAR(allow_undefined_flag, $1)=
-        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
-        then
-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-        else
-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-        fi
-        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $RM conftest*
-      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
-    [Whether or not to add -lc for building shared libraries])
-_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
-    [enable_shared_with_static_runtimes], [0],
-    [Whether or not to disallow shared libs when runtime libs are static])
-_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
-    [Compiler flag to allow reflexive dlopens])
-_LT_TAGDECL([], [whole_archive_flag_spec], [1],
-    [Compiler flag to generate shared objects directly from archives])
-_LT_TAGDECL([], [compiler_needs_object], [1],
-    [Whether the compiler copes with passing no objects directly])
-_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
-    [Create an old-style archive from a shared archive])
-_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
-    [Create a temporary old-style archive to link instead of a shared archive])
-_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
-_LT_TAGDECL([], [archive_expsym_cmds], [2])
-_LT_TAGDECL([], [module_cmds], [2],
-    [Commands used to build a loadable module if different from building
-    a shared archive.])
-_LT_TAGDECL([], [module_expsym_cmds], [2])
-_LT_TAGDECL([], [with_gnu_ld], [1],
-    [Whether we are building with GNU ld or not])
-_LT_TAGDECL([], [allow_undefined_flag], [1],
-    [Flag that allows shared libraries with undefined symbols to be built])
-_LT_TAGDECL([], [no_undefined_flag], [1],
-    [Flag that enforces no undefined symbols])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
-    [Flag to hardcode $libdir into a binary during linking.
-    This must work even if $libdir does not exist])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
-    [[If ld is used when linking, flag to hardcode $libdir into a binary
-    during linking.  This must work even if $libdir does not exist]])
-_LT_TAGDECL([], [hardcode_libdir_separator], [1],
-    [Whether we need a single "-rpath" flag with a separated argument])
-_LT_TAGDECL([], [hardcode_direct], [0],
-    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-    DIR into the resulting binary])
-_LT_TAGDECL([], [hardcode_direct_absolute], [0],
-    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-    DIR into the resulting binary and the resulting library dependency is
-    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
-    library is relocated])
-_LT_TAGDECL([], [hardcode_minus_L], [0],
-    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
-    into the resulting binary])
-_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
-    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
-    into the resulting binary])
-_LT_TAGDECL([], [hardcode_automatic], [0],
-    [Set to "yes" if building a shared library automatically hardcodes DIR
-    into the library and all subsequent libraries and executables linked
-    against it])
-_LT_TAGDECL([], [inherit_rpath], [0],
-    [Set to yes if linker adds runtime paths of dependent libraries
-    to runtime path list])
-_LT_TAGDECL([], [link_all_deplibs], [0],
-    [Whether libtool must link a program against all its dependency libraries])
-_LT_TAGDECL([], [fix_srcfile_path], [1],
-    [Fix the shell variable $srcfile for the compiler])
-_LT_TAGDECL([], [always_export_symbols], [0],
-    [Set to "yes" if exported symbols are required])
-_LT_TAGDECL([], [export_symbols_cmds], [2],
-    [The commands to list exported symbols])
-_LT_TAGDECL([], [exclude_expsyms], [1],
-    [Symbols that should not be listed in the preloaded symbols])
-_LT_TAGDECL([], [include_expsyms], [1],
-    [Symbols that must always be exported])
-_LT_TAGDECL([], [prelink_cmds], [2],
-    [Commands necessary for linking programs (against libraries) with templates])
-_LT_TAGDECL([], [file_list_spec], [1],
-    [Specify filename containing input files])
-dnl FIXME: Not yet implemented
-dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
-dnl    [Compiler flag to generate thread safe objects])
-])# _LT_LINKER_SHLIBS
-
-
-# _LT_LANG_C_CONFIG([TAG])
-# ------------------------
-# Ensure that the configuration variables for a C compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_C_CONFIG],
-[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_TAG_COMPILER
-# Save the default compiler, since it gets overwritten when the other
-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
-compiler_DEFAULT=$CC
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-if test -n "$compiler"; then
-  _LT_COMPILER_NO_RTTI($1)
-  _LT_COMPILER_PIC($1)
-  _LT_COMPILER_C_O($1)
-  _LT_COMPILER_FILE_LOCKS($1)
-  _LT_LINKER_SHLIBS($1)
-  _LT_SYS_DYNAMIC_LINKER($1)
-  _LT_LINKER_HARDCODE_LIBPATH($1)
-  LT_SYS_DLOPEN_SELF
-  _LT_CMD_STRIPLIB
-
-  # Report which library types will actually be built
-  AC_MSG_CHECKING([if libtool supports shared libraries])
-  AC_MSG_RESULT([$can_build_shared])
-
-  AC_MSG_CHECKING([whether to build shared libraries])
-  test "$can_build_shared" = "no" && enable_shared=no
-
-  # On AIX, shared libraries and static libraries use the same namespace, and
-  # are all built from PIC.
-  case $host_os in
-  aix3*)
-    test "$enable_shared" = yes && enable_static=no
-    if test -n "$RANLIB"; then
-      archive_cmds="$archive_cmds~\$RANLIB \$lib"
-      postinstall_cmds='$RANLIB $lib'
-    fi
-    ;;
-
-  aix[[4-9]]*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
-    fi
-    ;;
-  esac
-  AC_MSG_RESULT([$enable_shared])
-
-  AC_MSG_CHECKING([whether to build static libraries])
-  # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
-  AC_MSG_RESULT([$enable_static])
-
-  _LT_CONFIG($1)
-fi
-AC_LANG_POP
-CC="$lt_save_CC"
-])# _LT_LANG_C_CONFIG
-
-
-# _LT_PROG_CXX
-# ------------
-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
-# compiler, we have our own version here.
-m4_defun([_LT_PROG_CXX],
-[
-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
-AC_PROG_CXX
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  AC_PROG_CXXCPP
-else
-  _lt_caught_CXX_error=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_CXX
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_CXX], [])
-
-
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[AC_REQUIRE([_LT_PROG_CXX])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-
-AC_LANG_PUSH(C++)
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(compiler_needs_object, $1)=no
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the CXX compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="int some_variable = 0;"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC=$CC
-  lt_save_LD=$LD
-  lt_save_GCC=$GCC
-  GCC=$GXX
-  lt_save_with_gnu_ld=$with_gnu_ld
-  lt_save_path_LD=$lt_cv_path_LD
-  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-  else
-    $as_unset lt_cv_prog_gnu_ld
-  fi
-  if test -n "${lt_cv_path_LDCXX+set}"; then
-    lt_cv_path_LD=$lt_cv_path_LDCXX
-  else
-    $as_unset lt_cv_path_LD
-  fi
-  test -z "${LDCXX+set}" || LD=$LDCXX
-  CC=${CXX-"c++"}
-  compiler=$CC
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-
-  if test -n "$compiler"; then
-    # We don't want -fno-exception when compiling C++ code, so set the
-    # no_builtin_flag separately
-    if test "$GXX" = yes; then
-      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-    else
-      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-    fi
-
-    if test "$GXX" = yes; then
-      # Set up default GNU C++ configuration
-
-      LT_PATH_LD
-
-      # Check if GNU C++ uses GNU ld as the underlying linker, since the
-      # archiving commands below assume that GNU ld is being used.
-      if test "$with_gnu_ld" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-        # If archive_cmds runs LD, not CC, wlarc should be empty
-        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-        #     investigate it a little bit more. (MM)
-        wlarc='${wl}'
-
-        # ancient GNU ld didn't support --whole-archive et. al.
-        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
-	  $GREP 'no-whole-archive' > /dev/null; then
-          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-        else
-          _LT_TAGVAR(whole_archive_flag_spec, $1)=
-        fi
-      else
-        with_gnu_ld=no
-        wlarc=
-
-        # A generic and very simple default shared library creation
-        # command for GNU C++ for the case where it uses the native
-        # linker, instead of GNU ld.  If possible, this setting should
-        # overridden to take advantage of the native linker features on
-        # the platform it is being used on.
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-      fi
-
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-
-    else
-      GXX=no
-      with_gnu_ld=no
-      wlarc=
-    fi
-
-    # PORTME: fill in a description of your system's C++ link characteristics
-    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-    _LT_TAGVAR(ld_shlibs, $1)=yes
-    case $host_os in
-      aix3*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-      aix[[4-9]]*)
-        if test "$host_cpu" = ia64; then
-          # On IA64, the linker does run time linking by default, so we don't
-          # have to do anything special.
-          aix_use_runtimelinking=no
-          exp_sym_flag='-Bexport'
-          no_entry_flag=""
-        else
-          aix_use_runtimelinking=no
-
-          # Test if we are trying to use run time linking or normal
-          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-          # need to do runtime linking.
-          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-	    for ld_flag in $LDFLAGS; do
-	      case $ld_flag in
-	      *-brtl*)
-	        aix_use_runtimelinking=yes
-	        break
-	        ;;
-	      esac
-	    done
-	    ;;
-          esac
-
-          exp_sym_flag='-bexport'
-          no_entry_flag='-bnoentry'
-        fi
-
-        # When large executables or shared objects are built, AIX ld can
-        # have problems creating the table of contents.  If linking a library
-        # or program results in "error TOC overflow" add -mminimal-toc to
-        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-        _LT_TAGVAR(archive_cmds, $1)=''
-        _LT_TAGVAR(hardcode_direct, $1)=yes
-        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-        _LT_TAGVAR(link_all_deplibs, $1)=yes
-        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
-        if test "$GXX" = yes; then
-          case $host_os in aix4.[[012]]|aix4.[[012]].*)
-          # We only want to do this on AIX 4.2 and lower, the check
-          # below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" &&
-	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-	  then
-	    # We have reworked collect2
-	    :
-	  else
-	    # We have old collect2
-	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
-	    # It fails to find uninstalled libraries when the uninstalled
-	    # path is not listed in the libpath.  Setting hardcode_minus_L
-	    # to unsupported forces relinking
-	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-          esac
-          shared_flag='-shared'
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag="$shared_flag "'${wl}-G'
-	  fi
-        else
-          # not using gcc
-          if test "$host_cpu" = ia64; then
-	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	  # chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-          else
-	    if test "$aix_use_runtimelinking" = yes; then
-	      shared_flag='${wl}-G'
-	    else
-	      shared_flag='${wl}-bM:SRE'
-	    fi
-          fi
-        fi
-
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
-        # It seems that -bexpall does not export symbols beginning with
-        # underscore (_), so it is better to generate a list of symbols to
-	# export.
-        _LT_TAGVAR(always_export_symbols, $1)=yes
-        if test "$aix_use_runtimelinking" = yes; then
-          # Warning - without using the other runtime loading flags (-brtl),
-          # -berok will link without error, but may produce a broken library.
-          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
-          # Determine the default libpath from the value encoded in an empty
-          # executable.
-          _LT_SYS_MODULE_PATH_AIX
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-        else
-          if test "$host_cpu" = ia64; then
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-          else
-	    # Determine the default libpath from the value encoded in an
-	    # empty executable.
-	    _LT_SYS_MODULE_PATH_AIX
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	    # Warning - without using the other run time loading flags,
-	    # -berok will link without error, but may produce a broken library.
-	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	    # Exported symbols can be pulled into shared objects from archives
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	    # This is similar to how AIX traditionally builds its shared
-	    # libraries.
-	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-          fi
-        fi
-        ;;
-
-      beos*)
-	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	  # support --undefined.  This deserves some investigation.  FIXME
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	else
-	  _LT_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-
-      chorus*)
-        case $cc_basename in
-          *)
-	  # FIXME: insert proper C++ library support
-	  _LT_TAGVAR(ld_shlibs, $1)=no
-	  ;;
-        esac
-        ;;
-
-      cygwin* | mingw* | pw32* | cegcc*)
-        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-        # as there is no search path for DLLs.
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-        _LT_TAGVAR(always_export_symbols, $1)=no
-        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
-        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-          # If the export-symbols file already is a .def file (1st line
-          # is EXPORTS), use it as is; otherwise, prepend...
-          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    cp $export_symbols $output_objdir/$soname.def;
-          else
-	    echo EXPORTS > $output_objdir/$soname.def;
-	    cat $export_symbols >> $output_objdir/$soname.def;
-          fi~
-          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-        else
-          _LT_TAGVAR(ld_shlibs, $1)=no
-        fi
-        ;;
-      darwin* | rhapsody*)
-        _LT_DARWIN_LINKER_FEATURES($1)
-	;;
-
-      dgux*)
-        case $cc_basename in
-          ec++*)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          ghcx*)
-	    # Green Hills C++ Compiler
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-        esac
-        ;;
-
-      freebsd[[12]]*)
-        # C++ shared libraries reported to be fairly broken before
-	# switch to ELF
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      freebsd-elf*)
-        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-        ;;
-
-      freebsd* | dragonfly*)
-        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-        # conventions
-        _LT_TAGVAR(ld_shlibs, $1)=yes
-        ;;
-
-      gnu*)
-        ;;
-
-      hpux9*)
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-        _LT_TAGVAR(hardcode_direct, $1)=yes
-        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-				             # but as the default
-				             # location of the library.
-
-        case $cc_basename in
-          CC*)
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-          aCC*)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-            # Commands to make compiler produce verbose output that lists
-            # what "hidden" libraries, object files and flags are used when
-            # linking a shared library.
-            #
-            # There doesn't appear to be a way to prevent this compiler from
-            # explicitly linking system object files so we need to strip them
-            # from the output so that they don't get included in the library
-            # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-            ;;
-          *)
-            if test "$GXX" = yes; then
-              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-            else
-              # FIXME: insert proper C++ library support
-              _LT_TAGVAR(ld_shlibs, $1)=no
-            fi
-            ;;
-        esac
-        ;;
-
-      hpux10*|hpux11*)
-        if test $with_gnu_ld = no; then
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-          case $host_cpu in
-            hppa*64*|ia64*)
-              ;;
-            *)
-	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-              ;;
-          esac
-        fi
-        case $host_cpu in
-          hppa*64*|ia64*)
-            _LT_TAGVAR(hardcode_direct, $1)=no
-            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-            ;;
-          *)
-            _LT_TAGVAR(hardcode_direct, $1)=yes
-            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					         # but as the default
-					         # location of the library.
-            ;;
-        esac
-
-        case $cc_basename in
-          CC*)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          aCC*)
-	    case $host_cpu in
-	      hppa*64*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	        ;;
-	      ia64*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	        ;;
-	      *)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	        ;;
-	    esac
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-	    ;;
-          *)
-	    if test "$GXX" = yes; then
-	      if test $with_gnu_ld = no; then
-	        case $host_cpu in
-	          hppa*64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	            ;;
-	          ia64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	            ;;
-	          *)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	            ;;
-	        esac
-	      fi
-	    else
-	      # FIXME: insert proper C++ library support
-	      _LT_TAGVAR(ld_shlibs, $1)=no
-	    fi
-	    ;;
-        esac
-        ;;
-
-      interix[[3-9]]*)
-	_LT_TAGVAR(hardcode_direct, $1)=no
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-	# Instead, shared libraries are loaded at an image base (0x10000000 by
-	# default) and relocated if they conflict, which is a slow very memory
-	# consuming and fragmenting process.  To avoid this, we pick a random,
-	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	;;
-      irix5* | irix6*)
-        case $cc_basename in
-          CC*)
-	    # SGI C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	    # Archives containing C++ object files must be created using
-	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	    # necessary to make sure instantiated templates are included
-	    # in the archive.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	    ;;
-          *)
-	    if test "$GXX" = yes; then
-	      if test "$with_gnu_ld" = no; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	      else
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
-	      fi
-	    fi
-	    _LT_TAGVAR(link_all_deplibs, $1)=yes
-	    ;;
-        esac
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-        _LT_TAGVAR(inherit_rpath, $1)=yes
-        ;;
-
-      linux* | k*bsd*-gnu)
-        case $cc_basename in
-          KCC*)
-	    # Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	    # KCC will only create a shared library if the output file
-	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
-	    # to its proper name (with version) after linking.
-	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	    # Archives containing C++ object files must be created using
-	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	    ;;
-	  icpc* | ecpc* )
-	    # Intel C++
-	    with_gnu_ld=yes
-	    # version 8.0 and above of icpc choke on multiply defined symbols
-	    # if we add $predep_objects and $postdep_objects, however 7.1 and
-	    # earlier do not add the objects themselves.
-	    case `$CC -V 2>&1` in
-	      *"Version 7."*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-		;;
-	      *)  # Version 8.0 or newer
-	        tmp_idyn=
-	        case $host_cpu in
-		  ia64*) tmp_idyn=' -i_dynamic';;
-		esac
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-		;;
-	    esac
-	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	    ;;
-          pgCC* | pgcpp*)
-            # Portland Group C++ compiler
-	    case `$CC -V` in
-	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
-	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
-	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
-		$RANLIB $oldlib'
-	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-	      ;;
-	    *) # Version 6 will use weak symbols
-	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-	      ;;
-	    esac
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-            ;;
-	  cxx*)
-	    # Compaq C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	    runpath_var=LD_RUN_PATH
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-	    ;;
-	  xl*)
-	    # IBM XL 8.0 on PPC, with GNU ld
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    if test "x$supports_anon_versioning" = xyes; then
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-		echo "local: *; };" >> $output_objdir/$libname.ver~
-		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	    fi
-	    ;;
-	  *)
-	    case `$CC -V 2>&1 | sed 5q` in
-	    *Sun\ C*)
-	      # Sun C++ 5.9
-	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-	      _LT_TAGVAR(compiler_needs_object, $1)=yes
-
-	      # Not sure whether something based on
-	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-	      # would be better.
-	      output_verbose_link_cmd='echo'
-
-	      # Archives containing C++ object files must be created using
-	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	      # necessary to make sure instantiated templates are included
-	      # in the archive.
-	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	      ;;
-	    esac
-	    ;;
-	esac
-	;;
-
-      lynxos*)
-        # FIXME: insert proper C++ library support
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      m88k*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      mvs*)
-        case $cc_basename in
-          cxx*)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-	  *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-	esac
-	;;
-
-      netbsd*)
-        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-	  wlarc=
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	  _LT_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	fi
-	# Workaround some broken pre-1.5 toolchains
-	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-	;;
-
-      *nto* | *qnx*)
-        _LT_TAGVAR(ld_shlibs, $1)=yes
-	;;
-
-      openbsd2*)
-        # C++ shared libraries are fairly broken
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      openbsd*)
-	if test -f /usr/libexec/ld.so; then
-	  _LT_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-	  fi
-	  output_verbose_link_cmd=echo
-	else
-	  _LT_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-
-      osf3* | osf4* | osf5*)
-        case $cc_basename in
-          KCC*)
-	    # Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	    # KCC will only create a shared library if the output file
-	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
-	    # to its proper name (with version) after linking.
-	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	    # Archives containing C++ object files must be created using
-	    # the KAI C++ compiler.
-	    case $host in
-	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
-	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
-	    esac
-	    ;;
-          RCC*)
-	    # Rational C++ 2.4.1
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          cxx*)
-	    case $host in
-	      osf3*)
-	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-		;;
-	      *)
-	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
-	          $RM $lib.exp'
-	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-		;;
-	    esac
-
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-	    ;;
-	  *)
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	      case $host in
-	        osf3*)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-		  ;;
-	        *)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-		  ;;
-	      esac
-
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	      # Commands to make compiler produce verbose output that lists
-	      # what "hidden" libraries, object files and flags are used when
-	      # linking a shared library.
-	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-
-	    else
-	      # FIXME: insert proper C++ library support
-	      _LT_TAGVAR(ld_shlibs, $1)=no
-	    fi
-	    ;;
-        esac
-        ;;
-
-      psos*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      sunos4*)
-        case $cc_basename in
-          CC*)
-	    # Sun C++ 4.x
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          lcc*)
-	    # Lucid
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-        esac
-        ;;
-
-      solaris*)
-        case $cc_basename in
-          CC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
-	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	    case $host_os in
-	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-	      *)
-		# The compiler driver will combine and reorder linker options,
-		# but understands `-z linker_flag'.
-	        # Supported since Solaris 2.6 (maybe 2.5.1?)
-		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-	        ;;
-	    esac
-	    _LT_TAGVAR(link_all_deplibs, $1)=yes
-
-	    output_verbose_link_cmd='echo'
-
-	    # Archives containing C++ object files must be created using
-	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	    # necessary to make sure instantiated templates are included
-	    # in the archive.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	    ;;
-          gcx*)
-	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	    # The C++ compiler must be used to create the archive.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	    ;;
-          *)
-	    # GNU C++ compiler with Solaris linker
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-	        # Commands to make compiler produce verbose output that lists
-	        # what "hidden" libraries, object files and flags are used when
-	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-	      else
-	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	        # platform.
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-	        # Commands to make compiler produce verbose output that lists
-	        # what "hidden" libraries, object files and flags are used when
-	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-	      fi
-
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	      case $host_os in
-		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-		*)
-		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-		  ;;
-	      esac
-	    fi
-	    ;;
-        esac
-        ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-
-      case $cc_basename in
-        CC*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-      esac
-      ;;
-
-      sysv5* | sco3.2v5* | sco5v6*)
-	# Note: We can NOT use -z defs as we might desire, because we do not
-	# link with -lc, and that would cause any symbols used from libc to
-	# always be unresolved, which means just about no library would
-	# ever link correctly.  If we're not using GNU ld we use -z text
-	# though, which does catch some bad symbols but isn't as heavy-handed
-	# as -z defs.
-	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
-	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-	_LT_TAGVAR(link_all_deplibs, $1)=yes
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-	runpath_var='LD_RUN_PATH'
-
-	case $cc_basename in
-          CC*)
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    ;;
-	  *)
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    ;;
-	esac
-      ;;
-
-      tandem*)
-        case $cc_basename in
-          NCC*)
-	    # NonStop-UX NCC 3.20
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-        esac
-        ;;
-
-      vxworks*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      *)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-    esac
-
-    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-    _LT_TAGVAR(GCC, $1)="$GXX"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_SYS_HIDDEN_LIBDEPS($1)
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  CC=$lt_save_CC
-  LDCXX=$LD
-  LD=$lt_save_LD
-  GCC=$lt_save_GCC
-  with_gnu_ld=$lt_save_with_gnu_ld
-  lt_cv_path_LDCXX=$lt_cv_path_LD
-  lt_cv_path_LD=$lt_save_path_LD
-  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
-
-AC_LANG_POP
-])# _LT_LANG_CXX_CONFIG
-
-
-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
-# ---------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-# Dependencies to place before and after the object being linked:
-_LT_TAGVAR(predep_objects, $1)=
-_LT_TAGVAR(postdep_objects, $1)=
-_LT_TAGVAR(predeps, $1)=
-_LT_TAGVAR(postdeps, $1)=
-_LT_TAGVAR(compiler_lib_search_path, $1)=
-
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library.  It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
-int a;
-void foo (void) { a = 0; }
-_LT_EOF
-], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-_LT_EOF
-], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
-      subroutine foo
-      implicit none
-      integer*4 a
-      a=0
-      return
-      end
-_LT_EOF
-], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
-      subroutine foo
-      implicit none
-      integer a
-      a=0
-      return
-      end
-_LT_EOF
-], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
-public class foo {
-  private int a;
-  public void bar (void) {
-    a = 0;
-  }
-};
-_LT_EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  for p in `eval "$output_verbose_link_cmd"`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" ||
-          test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	   else
-	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
-	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
-       fi
-       ;;
-
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
-	   _LT_TAGVAR(predep_objects, $1)="$p"
-	 else
-	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
-	 fi
-       else
-	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
-	   _LT_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$RM -f confest.$objext
-
-# PORTME: override above test on systems where it is broken
-m4_if([$1], [CXX],
-[case $host_os in
-interix[[3-9]]*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  _LT_TAGVAR(predep_objects,$1)=
-  _LT_TAGVAR(postdep_objects,$1)=
-  _LT_TAGVAR(postdeps,$1)=
-  ;;
-
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-esac
-])
-
-case " $_LT_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
-    [The directories searched by this compiler when creating a shared library])
-_LT_TAGDECL([], [predep_objects], [1],
-    [Dependencies to place before and after the objects being linked to
-    create a shared library])
-_LT_TAGDECL([], [postdep_objects], [1])
-_LT_TAGDECL([], [predeps], [1])
-_LT_TAGDECL([], [postdeps], [1])
-_LT_TAGDECL([], [compiler_lib_search_path], [1],
-    [The library search path used internally by the compiler when linking
-    a shared library])
-])# _LT_SYS_HIDDEN_LIBDEPS
-
-
-# _LT_PROG_F77
-# ------------
-# Since AC_PROG_F77 is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_F77],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
-AC_PROG_F77
-if test -z "$F77" || test "X$F77" = "Xno"; then
-  _lt_disable_F77=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_F77
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_F77], [])
-
-
-# _LT_LANG_F77_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a Fortran 77 compiler are
-# suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_F77_CONFIG],
-[AC_REQUIRE([_LT_PROG_F77])dnl
-AC_LANG_PUSH(Fortran 77)
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the F77 compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code="\
-      program t
-      end
-"
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
-  lt_save_GCC=$GCC
-  CC=${F77-"f77"}
-  compiler=$CC
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-  GCC=$G77
-  if test -n "$compiler"; then
-    AC_MSG_CHECKING([if libtool supports shared libraries])
-    AC_MSG_RESULT([$can_build_shared])
-
-    AC_MSG_CHECKING([whether to build shared libraries])
-    test "$can_build_shared" = "no" && enable_shared=no
-
-    # On AIX, shared libraries and static libraries use the same namespace, and
-    # are all built from PIC.
-    case $host_os in
-      aix3*)
-        test "$enable_shared" = yes && enable_static=no
-        if test -n "$RANLIB"; then
-          archive_cmds="$archive_cmds~\$RANLIB \$lib"
-          postinstall_cmds='$RANLIB $lib'
-        fi
-        ;;
-      aix[[4-9]]*)
-	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-	  test "$enable_shared" = yes && enable_static=no
-	fi
-        ;;
-    esac
-    AC_MSG_RESULT([$enable_shared])
-
-    AC_MSG_CHECKING([whether to build static libraries])
-    # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
-    AC_MSG_RESULT([$enable_static])
-
-    _LT_TAGVAR(GCC, $1)="$G77"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  GCC=$lt_save_GCC
-  CC="$lt_save_CC"
-fi # test "$_lt_disable_F77" != yes
-
-AC_LANG_POP
-])# _LT_LANG_F77_CONFIG
-
-
-# _LT_PROG_FC
-# -----------
-# Since AC_PROG_FC is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_FC],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
-AC_PROG_FC
-if test -z "$FC" || test "X$FC" = "Xno"; then
-  _lt_disable_FC=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_FC
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_FC], [])
-
-
-# _LT_LANG_FC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for a Fortran compiler are
-# suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_FC_CONFIG],
-[AC_REQUIRE([_LT_PROG_FC])dnl
-AC_LANG_PUSH(Fortran)
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for fc test sources.
-ac_ext=${ac_fc_srcext-f}
-
-# Object file extension for compiled fc test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the FC compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code="\
-      program t
-      end
-"
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
-  lt_save_GCC=$GCC
-  CC=${FC-"f95"}
-  compiler=$CC
-  GCC=$ac_cv_fc_compiler_gnu
-
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-
-  if test -n "$compiler"; then
-    AC_MSG_CHECKING([if libtool supports shared libraries])
-    AC_MSG_RESULT([$can_build_shared])
-
-    AC_MSG_CHECKING([whether to build shared libraries])
-    test "$can_build_shared" = "no" && enable_shared=no
-
-    # On AIX, shared libraries and static libraries use the same namespace, and
-    # are all built from PIC.
-    case $host_os in
-      aix3*)
-        test "$enable_shared" = yes && enable_static=no
-        if test -n "$RANLIB"; then
-          archive_cmds="$archive_cmds~\$RANLIB \$lib"
-          postinstall_cmds='$RANLIB $lib'
-        fi
-        ;;
-      aix[[4-9]]*)
-	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-	  test "$enable_shared" = yes && enable_static=no
-	fi
-        ;;
-    esac
-    AC_MSG_RESULT([$enable_shared])
-
-    AC_MSG_CHECKING([whether to build static libraries])
-    # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
-    AC_MSG_RESULT([$enable_static])
-
-    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_SYS_HIDDEN_LIBDEPS($1)
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  GCC=$lt_save_GCC
-  CC="$lt_save_CC"
-fi # test "$_lt_disable_FC" != yes
-
-AC_LANG_POP
-])# _LT_LANG_FC_CONFIG
-
-
-# _LT_LANG_GCJ_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Java Compiler compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_GCJ_CONFIG],
-[AC_REQUIRE([LT_PROG_GCJ])dnl
-AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-lt_save_GCC=$GCC
-GCC=yes
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-if test -n "$compiler"; then
-  _LT_COMPILER_NO_RTTI($1)
-  _LT_COMPILER_PIC($1)
-  _LT_COMPILER_C_O($1)
-  _LT_COMPILER_FILE_LOCKS($1)
-  _LT_LINKER_SHLIBS($1)
-  _LT_LINKER_HARDCODE_LIBPATH($1)
-
-  _LT_CONFIG($1)
-fi
-
-AC_LANG_RESTORE
-
-GCC=$lt_save_GCC
-CC="$lt_save_CC"
-])# _LT_LANG_GCJ_CONFIG
-
-
-# _LT_LANG_RC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for the Windows resource compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_RC_CONFIG],
-[AC_REQUIRE([LT_PROG_RC])dnl
-AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-lt_save_GCC=$GCC
-GCC=
-CC=${RC-"windres"}
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-if test -n "$compiler"; then
-  :
-  _LT_CONFIG($1)
-fi
-
-GCC=$lt_save_GCC
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# _LT_LANG_RC_CONFIG
-
-
-# LT_PROG_GCJ
-# -----------
-AC_DEFUN([LT_PROG_GCJ],
-[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
-  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
-    [AC_CHECK_TOOL(GCJ, gcj,)
-      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-      AC_SUBST(GCJFLAGS)])])[]dnl
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
-
-
-# LT_PROG_RC
-# ----------
-AC_DEFUN([LT_PROG_RC],
-[AC_CHECK_TOOL(RC, windres,)
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_RC], [])
-
-
-# _LT_DECL_EGREP
-# --------------
-# If we don't have a new enough Autoconf to choose the best grep
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_EGREP],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_REQUIRE([AC_PROG_FGREP])dnl
-test -z "$GREP" && GREP=grep
-_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
-_LT_DECL([], [EGREP], [1], [An ERE matcher])
-_LT_DECL([], [FGREP], [1], [A literal string matcher])
-dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
-AC_SUBST([GREP])
-])
-
-
-# _LT_DECL_OBJDUMP
-# --------------
-# If we don't have a new enough Autoconf to choose the best objdump
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_OBJDUMP],
-[AC_CHECK_TOOL(OBJDUMP, objdump, false)
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
-AC_SUBST([OBJDUMP])
-])
-
-
-# _LT_DECL_SED
-# ------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-m4_defun([_LT_DECL_SED],
-[AC_PROG_SED
-test -z "$SED" && SED=sed
-Xsed="$SED -e 1s/^X//"
-_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
-_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
-    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
-])# _LT_DECL_SED
-
-m4_ifndef([AC_PROG_SED], [
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-
-m4_defun([AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
-  fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
-    fi
-  done
-done
-])
-SED=$lt_cv_path_SED
-AC_SUBST([SED])
-AC_MSG_RESULT([$SED])
-])#AC_PROG_SED
-])#m4_ifndef
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_SED], [])
-
-
-# _LT_CHECK_SHELL_FEATURES
-# ------------------------
-# Find out whether the shell is Bourne or XSI compatible,
-# or has some other useful features.
-m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  lt_unset=unset
-else
-  lt_unset=false
-fi
-_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
-
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  lt_SP2NL='tr \040 \012'
-  lt_NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  lt_SP2NL='tr \100 \n'
-  lt_NL2SP='tr \r\n \100\100'
-  ;;
-esac
-_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
-_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
-])# _LT_CHECK_SHELL_FEATURES
-
-
-# _LT_PROG_XSI_SHELLFNS
-# ---------------------
-# Bourne and XSI compatible variants of some useful shell functions.
-m4_defun([_LT_PROG_XSI_SHELLFNS],
-[case $xsi_shell in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-  func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
-  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-  # positional parameters, so assign one to ordinary parameter first.
-  func_stripname_result=${3}
-  func_stripname_result=${func_stripname_result#"${1}"}
-  func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=${1%%=*}
-  func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  case ${1} in
-    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-    *)    func_lo2o_result=${1} ;;
-  esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=$(( $[*] ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=${#1}
-}
-
-_LT_EOF
-    ;;
-  *) # Bourne compatible functions.
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-dnl func_dirname_and_basename
-dnl A portable version of this function is already defined in general.m4sh
-dnl so there is no need for it here.
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-  case ${2} in
-    .*) func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
-  esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[[^=]]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=`expr "$[@]"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
-esac
-
-case $lt_shell_append in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$[1]+=\$[2]"
-}
-_LT_EOF
-    ;;
-  *)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$[1]=\$$[1]\$[2]"
-}
-
-_LT_EOF
-    ;;
-  esac
-])
-
-# Helper functions for option handling.                    -*- Autoconf -*-
-#
-#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
-#   Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 6 ltoptions.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
-
-
-# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
-# ------------------------------------------
-m4_define([_LT_MANGLE_OPTION],
-[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
-
-
-# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
-# ---------------------------------------
-# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
-# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
-# saved as a flag.
-m4_define([_LT_SET_OPTION],
-[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
-m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
-        _LT_MANGLE_DEFUN([$1], [$2]),
-    [m4_warning([Unknown $1 option `$2'])])[]dnl
-])
-
-
-# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
-# ------------------------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-m4_define([_LT_IF_OPTION],
-[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
-
-
-# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
-# -------------------------------------------------------
-# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
-# are set.
-m4_define([_LT_UNLESS_OPTIONS],
-[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
-	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
-		      [m4_define([$0_found])])])[]dnl
-m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
-])[]dnl
-])
-
-
-# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
-# ----------------------------------------
-# OPTION-LIST is a space-separated list of Libtool options associated
-# with MACRO-NAME.  If any OPTION has a matching handler declared with
-# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
-# the unknown option and exit.
-m4_defun([_LT_SET_OPTIONS],
-[# Set options
-m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
-    [_LT_SET_OPTION([$1], _LT_Option)])
-
-m4_if([$1],[LT_INIT],[
-  dnl
-  dnl Simply set some default values (i.e off) if boolean options were not
-  dnl specified:
-  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
-  ])
-  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
-  ])
-  dnl
-  dnl If no reference was made to various pairs of opposing options, then
-  dnl we run the default mode handler for the pair.  For example, if neither
-  dnl `shared' nor `disable-shared' was passed, we enable building of shared
-  dnl archives by default:
-  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
-  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
-  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
-  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
-  		   [_LT_ENABLE_FAST_INSTALL])
-  ])
-])# _LT_SET_OPTIONS
-
-
-
-# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
-# -----------------------------------------
-m4_define([_LT_MANGLE_DEFUN],
-[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
-
-
-# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
-# -----------------------------------------------
-m4_define([LT_OPTION_DEFINE],
-[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
-])# LT_OPTION_DEFINE
-
-
-# dlopen
-# ------
-LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
-])
-
-AU_DEFUN([AC_LIBTOOL_DLOPEN],
-[_LT_SET_OPTION([LT_INIT], [dlopen])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
-
-
-# win32-dll
-# ---------
-# Declare package support for building win32 dll's.
-LT_OPTION_DEFINE([LT_INIT], [win32-dll],
-[enable_win32_dll=yes
-
-case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-esac
-
-test -z "$AS" && AS=as
-_LT_DECL([], [AS],      [0], [Assembler program])dnl
-
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
-
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
-])# win32-dll
-
-AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-_LT_SET_OPTION([LT_INIT], [win32-dll])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
-
-
-# _LT_ENABLE_SHARED([DEFAULT])
-# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_SHARED],
-[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([shared],
-    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
-
-    _LT_DECL([build_libtool_libs], [enable_shared], [0],
-	[Whether or not to build shared libraries])
-])# _LT_ENABLE_SHARED
-
-LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
-
-# Old names:
-AC_DEFUN([AC_ENABLE_SHARED],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
-])
-
-AC_DEFUN([AC_DISABLE_SHARED],
-[_LT_SET_OPTION([LT_INIT], [disable-shared])
-])
-
-AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_ENABLE_SHARED], [])
-dnl AC_DEFUN([AM_DISABLE_SHARED], [])
-
-
-
-# _LT_ENABLE_STATIC([DEFAULT])
-# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_STATIC],
-[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([static],
-    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
-
-    _LT_DECL([build_old_libs], [enable_static], [0],
-	[Whether or not to build static libraries])
-])# _LT_ENABLE_STATIC
-
-LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
-
-# Old names:
-AC_DEFUN([AC_ENABLE_STATIC],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
-])
-
-AC_DEFUN([AC_DISABLE_STATIC],
-[_LT_SET_OPTION([LT_INIT], [disable-static])
-])
-
-AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_ENABLE_STATIC], [])
-dnl AC_DEFUN([AM_DISABLE_STATIC], [])
-
-
-
-# _LT_ENABLE_FAST_INSTALL([DEFAULT])
-# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_FAST_INSTALL],
-[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([fast-install],
-    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
-
-_LT_DECL([fast_install], [enable_fast_install], [0],
-	 [Whether or not to optimize for fast installation])dnl
-])# _LT_ENABLE_FAST_INSTALL
-
-LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
-
-# Old names:
-AU_DEFUN([AC_ENABLE_FAST_INSTALL],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.])
-])
-
-AU_DEFUN([AC_DISABLE_FAST_INSTALL],
-[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
-dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
-
-
-# _LT_WITH_PIC([MODE])
-# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
-# LT_INIT options.
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-m4_define([_LT_WITH_PIC],
-[AC_ARG_WITH([pic],
-    [AS_HELP_STRING([--with-pic],
-	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
-    [pic_mode=default])
-
-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
-
-_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
-])# _LT_WITH_PIC
-
-LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
-LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
-
-# Old name:
-AU_DEFUN([AC_LIBTOOL_PICMODE],
-[_LT_SET_OPTION([LT_INIT], [pic-only])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
-
-
-m4_define([_LTDL_MODE], [])
-LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
-		 [m4_define([_LTDL_MODE], [nonrecursive])])
-LT_OPTION_DEFINE([LTDL_INIT], [recursive],
-		 [m4_define([_LTDL_MODE], [recursive])])
-LT_OPTION_DEFINE([LTDL_INIT], [subproject],
-		 [m4_define([_LTDL_MODE], [subproject])])
-
-m4_define([_LTDL_TYPE], [])
-LT_OPTION_DEFINE([LTDL_INIT], [installable],
-		 [m4_define([_LTDL_TYPE], [installable])])
-LT_OPTION_DEFINE([LTDL_INIT], [convenience],
-		 [m4_define([_LTDL_TYPE], [convenience])])
-
-# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
-#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
-# Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 6 ltsugar.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
-
-
-# lt_join(SEP, ARG1, [ARG2...])
-# -----------------------------
-# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
-# associated separator.
-# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
-# versions in m4sugar had bugs.
-m4_define([lt_join],
-[m4_if([$#], [1], [],
-       [$#], [2], [[$2]],
-       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
-m4_define([_lt_join],
-[m4_if([$#$2], [2], [],
-       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
-
-
-# lt_car(LIST)
-# lt_cdr(LIST)
-# ------------
-# Manipulate m4 lists.
-# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
-m4_define([lt_car], [[$1]])
-m4_define([lt_cdr],
-[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
-       [$#], 1, [],
-       [m4_dquote(m4_shift($@))])])
-m4_define([lt_unquote], $1)
-
-
-# lt_append(MACRO-NAME, STRING, [SEPARATOR])
-# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
-# Note that neither SEPARATOR nor STRING are expanded; they are appended
-# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
-# No SEPARATOR is output if MACRO-NAME was previously undefined (different
-# than defined and empty).
-#
-# This macro is needed until we can rely on Autoconf 2.62, since earlier
-# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
-m4_define([lt_append],
-[m4_define([$1],
-	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
-
-
-
-# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
-# ----------------------------------------------------------
-# Produce a SEP delimited list of all paired combinations of elements of
-# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
-# has the form PREFIXmINFIXSUFFIXn.
-# Needed until we can rely on m4_combine added in Autoconf 2.62.
-m4_define([lt_combine],
-[m4_if(m4_eval([$# > 3]), [1],
-       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
-[[m4_foreach([_Lt_prefix], [$2],
-	     [m4_foreach([_Lt_suffix],
-		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
-	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
-
-
-# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
-# -----------------------------------------------------------------------
-# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
-# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
-m4_define([lt_if_append_uniq],
-[m4_ifdef([$1],
-	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
-		 [lt_append([$1], [$2], [$3])$4],
-		 [$5])],
-	  [lt_append([$1], [$2], [$3])$4])])
-
-
-# lt_dict_add(DICT, KEY, VALUE)
-# -----------------------------
-m4_define([lt_dict_add],
-[m4_define([$1($2)], [$3])])
-
-
-# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
-# --------------------------------------------
-m4_define([lt_dict_add_subkey],
-[m4_define([$1($2:$3)], [$4])])
-
-
-# lt_dict_fetch(DICT, KEY, [SUBKEY])
-# ----------------------------------
-m4_define([lt_dict_fetch],
-[m4_ifval([$3],
-	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
-    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
-
-
-# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
-# -----------------------------------------------------------------
-m4_define([lt_if_dict_fetch],
-[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
-	[$5],
-    [$6])])
-
-
-# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
-# --------------------------------------------------------------
-m4_define([lt_dict_filter],
-[m4_if([$5], [], [],
-  [lt_join(m4_quote(m4_default([$4], [[, ]])),
-           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
-		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
-])
-
-# ltversion.m4 -- version numbers			-*- Autoconf -*-
-#
-#   Copyright (C) 2004 Free Software Foundation, Inc.
-#   Written by Scott James Remnant, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# Generated from ltversion.in.
-
-# serial 3012 ltversion.m4
-# This file is part of GNU Libtool
-
-m4_define([LT_PACKAGE_VERSION], [2.2.6])
-m4_define([LT_PACKAGE_REVISION], [1.3012])
-
-AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.2.6'
-macro_revision='1.3012'
-_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
-_LT_DECL(, macro_revision, 0)
-])
-
-# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
-#
-#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
-#   Written by Scott James Remnant, 2004.
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 4 lt~obsolete.m4
-
-# These exist entirely to fool aclocal when bootstrapping libtool.
-#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
-# which have later been changed to m4_define as they aren't part of the
-# exported API, or moved to Autoconf or Automake where they belong.
-#
-# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
-# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
-# using a macro with the same name in our local m4/libtool.m4 it'll
-# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
-# and doesn't know about Autoconf macros at all.)
-#
-# So we provide this file, which has a silly filename so it's always
-# included after everything else.  This provides aclocal with the
-# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
-# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
-#
-# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
-# Yes, that means every name once taken will need to remain here until
-# we give up compatibility with versions before 1.7, at which point
-# we need to keep only those names which we still refer to.
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
-
-m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
-m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
-m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
-m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
-m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
-m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
-m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
-m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
-m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
-m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
-m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
-m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
-m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
-m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
-m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
-m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
-m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
-m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
-m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
-m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
-m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
-m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
-m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
-m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
-m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
-m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
-m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
-m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
-m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
-m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
-m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
-m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
-m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
-m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
-m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
-m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
-m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
-m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
-m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
-m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
-m4_ifndef([AC_LIBTOOL_RC],		[AC_DEFUN([AC_LIBTOOL_RC])])
-m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
-m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
-m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
-m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
-m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
-m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
-m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
-m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
-
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/autogen.sh	Fri Mar 05 20:46:36 2010 +0900
@@ -0,0 +1,60 @@
+#!/bin/sh
+
+TARGET=FreeWnn
+CONFIGURE_SRC=configure.in
+
+[ -f ${CONFIGURE_SRC} ] || {
+  echo "autogen.sh: run this command only at the top of a ${TARGET} source tree."
+  exit 1
+}
+
+DIE=0
+
+(autoconf --version) < /dev/null > /dev/null 2>&1 || {
+  echo
+  echo "You must have autoconf installed to compile ${TARGET}."
+  echo "Get ftp://ftp.gnu.org/pub/gnu/autoconf/autoconf-2.62.tar.gz"
+  echo "(or a newer version if it is available)"
+  DIE=1
+  NO_AUTOCONF=yes
+}
+
+(automake --version) < /dev/null > /dev/null 2>&1 || {
+  echo
+  echo "You must have automake installed to compile ${TARGET}."
+  echo "Get ftp://ftp.gnu.org/pub/gnu/automake/automake-1.10.1.tar.gz"
+  echo "(or a newer version if it is available)"
+  DIE=1
+  NO_AUTOMAKE=yes
+}
+
+# if no automake, don't bother testing for aclocal
+test -n "$NO_AUTOMAKE" || (aclocal --version) < /dev/null > /dev/null 2>&1 || {
+  echo
+  echo "**Error**: Missing \`aclocal'.  The version of \`automake'"
+  echo "installed doesn't appear recent enough."
+  echo "Get ftp://ftp.gnu.org/pub/gnu/automake/automake-1.10.1.tar.gz"
+  echo "(or a newer version if it is available)"
+  DIE=1
+}
+
+# if no autoconf, don't bother testing for autoheader
+test -n "$NO_AUTOCONF" || (autoheader --version) < /dev/null > /dev/null 2>&1 || {
+  echo
+  echo "**Error**: Missing \`autoheader'.  The version of \`autoheader'"
+  echo "installed doesn't appear recent enough."
+  echo "Get ftp://ftp.gnu.org/pub/gnu/autoconf/autoconf-2.62.tar.gz"
+  echo "(or a newer version if it is available)"
+  DIE=1
+}
+
+if test "$DIE" -eq 1; then
+        exit 1
+fi
+
+echo "Generating configure script and Makefiles for ${TARGET}."
+
+echo "Running aclocal ..."
+aclocal -I .
+echo "Running autoconf ..."
+autoconf
--- a/configure	Fri Jan 23 16:36:13 2009 +0900
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,16552 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.60.
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" ""	$as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-if test "x$CONFIG_SHELL" = x; then
-  if (eval ":") 2>/dev/null; then
-  as_have_required=yes
-else
-  as_have_required=no
-fi
-
-  if test $as_have_required = yes && 	 (eval ":
-(as_func_return () {
-  (exit \$1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
-
-exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-  :
-else
-  exitcode=1
-  echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
-  as_lineno_1=\$LINENO
-  as_lineno_2=\$LINENO
-  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
-  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
-  :
-else
-  as_candidate_shells=
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /usr/bin/posix$PATH_SEPARATOR/bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  case $as_dir in
-	 /*)
-	   for as_base in sh bash ksh sh5; do
-	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
-	   done;;
-       esac
-done
-IFS=$as_save_IFS
-
-
-      for as_shell in $as_candidate_shells $SHELL; do
-	 # Try only shells that exist, to save several forks.
-	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-		{ ("$as_shell") 2> /dev/null <<\_ASEOF
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-:
-_ASEOF
-}; then
-  CONFIG_SHELL=$as_shell
-	       as_have_required=yes
-	       if { "$as_shell" 2> /dev/null <<\_ASEOF
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-:
-(as_func_return () {
-  (exit $1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
-
-exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
-  :
-else
-  exitcode=1
-  echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
-  break
-fi
-
-fi
-
-      done
-
-      if test "x$CONFIG_SHELL" != x; then
-  for as_var in BASH_ENV ENV
-        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-        done
-        export CONFIG_SHELL
-        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-fi
-
-
-    if test $as_have_required = no; then
-  echo This script requires a shell more modern than all the
-      echo shells that I found on your system.  Please install a
-      echo modern shell, or manually run the script under such a
-      echo shell if you do have one.
-      { (exit 1); exit 1; }
-fi
-
-
-fi
-
-fi
-
-
-
-(eval "as_func_return () {
-  (exit \$1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
-
-exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-  :
-else
-  exitcode=1
-  echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0") || {
-  echo No shell found that supports shell functions.
-  echo Please tell autoconf@gnu.org about your system,
-  echo including any error possibly output before this
-  echo message
-}
-
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line after each line using $LINENO; the second 'sed'
-  # does the real work.  The second script uses 'N' to pair each
-  # line-number line with the line containing $LINENO, and appends
-  # trailing '-' during substitution so that $LINENO is not a special
-  # case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-  # E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
-  case `echo 'x\c'` in
-  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  *)   ECHO_C='\c';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-    as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-# Find out whether ``test -x'' works.  Don't use a zero-byte file, as
-# systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
-  as_executable_p="test -x"
-else
-  as_executable_p=:
-fi
-rm -f conf$$.file
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$lt_ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
-  ;;
-esac
-
-ECHO=${lt_ECHO-echo}
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<_LT_EOF
-$*
-_LT_EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
-  if test "X${echo_test_string+set}" != Xset; then
-    # find a string as large as possible, as long as the shell can cope with it
-    for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
-	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
-      then
-        break
-      fi
-    done
-  fi
-
-  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-     test "X$echo_testing_string" = "X$echo_test_string"; then
-    :
-  else
-    # The Solaris, AIX, and Digital Unix default echo programs unquote
-    # backslashes.  This makes it impossible to quote backslashes using
-    #   echo "$something" | sed 's/\\/\\\\/g'
-    #
-    # So, first we look for a working echo in the user's PATH.
-
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for dir in $PATH /usr/ucb; do
-      IFS="$lt_save_ifs"
-      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        ECHO="$dir/echo"
-        break
-      fi
-    done
-    IFS="$lt_save_ifs"
-
-    if test "X$ECHO" = Xecho; then
-      # We didn't find a better echo, so look for alternatives.
-      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        # This shell has a builtin print -r that does the trick.
-        ECHO='print -r'
-      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
-	   test "X$CONFIG_SHELL" != X/bin/ksh; then
-        # If we have ksh, try running configure again with it.
-        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-        export ORIGINAL_CONFIG_SHELL
-        CONFIG_SHELL=/bin/ksh
-        export CONFIG_SHELL
-        exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-      else
-        # Try using printf.
-        ECHO='printf %s\n'
-        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	  # Cool, printf works
-	  :
-        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	  export CONFIG_SHELL
-	  SHELL="$CONFIG_SHELL"
-	  export SHELL
-	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
-        elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
-        else
-	  # maybe with a smaller string...
-	  prev=:
-
-	  for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
-	    then
-	      break
-	    fi
-	    prev="$cmd"
-	  done
-
-	  if test "$prev" != 'sed 50q "$0"'; then
-	    echo_test_string=`eval $prev`
-	    export echo_test_string
-	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-	  else
-	    # Oops.  We lost completely, so just stick with echo.
-	    ECHO=echo
-	  fi
-        fi
-      fi
-    fi
-  fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
-
-exec 7<&0 </dev/null 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-
-ac_unique_file="Wnn/conv/cvt_head.h"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#if HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#if STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# if HAVE_STDLIB_H
-#  include <stdlib.h>
-# endif
-#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
-#  include <memory.h>
-# endif
-# include <string.h>
-#endif
-#if HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#if HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-#if HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-build
-build_cpu
-build_vendor
-build_os
-host
-host_cpu
-host_vendor
-host_os
-SUBDIRS
-WNNMANDIR
-Wnn
-JSERVER_SUBDIRS2
-cWnn
-kWnn
-WNNJLIB
-DEPWNNJLIB
-HINSI_DATA
-CWNNJLIB
-DEPCWNNJLIB
-CHINSI_DATA
-THINSI_DATA
-KWNNJLIB
-DEPKWNNJLIB
-KHINSI_DATA
-ipv6
-unsafe_path
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-ac_ct_CC
-EXEEXT
-OBJEXT
-CCOPTIONS
-CDEBUGFLAGS
-INSTPGMFLAGS
-CPP
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-LN_S
-SET_MAKE
-LIBTOOL
-SED
-GREP
-EGREP
-FGREP
-LD
-DUMPBIN
-ac_ct_DUMPBIN
-NM
-OBJDUMP
-AR
-STRIP
-RANLIB
-lt_ECHO
-DSYMUTIL
-NMEDIT
-LIPO
-OTOOL
-OTOOL64
-LIBTOOL_DEPS
-XMKMF
-TERMLIB
-CNVFILE_SUBDIR
-LIBOBJS
-JS_SUPPORTOBJS
-WRAPLIB
-LTLIBOBJS'
-ac_subst_files=''
-      ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-CPP
-XMKMF'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval $ac_prev=\$ac_option
-    ac_prev=
-    continue
-  fi
-
-  case $ac_option in
-  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *)	ac_optarg=yes ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_dashdash$ac_option in
-  --)
-    ac_dashdash=yes ;;
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=*)
-    datadir=$ac_optarg ;;
-
-  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-  | --dataroo | --dataro | --datar)
-    ac_prev=datarootdir ;;
-  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-    datarootdir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval enable_$ac_feature=no ;;
-
-  -docdir | --docdir | --docdi | --doc | --do)
-    ac_prev=docdir ;;
-  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-    docdir=$ac_optarg ;;
-
-  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-    ac_prev=dvidir ;;
-  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-    dvidir=$ac_optarg ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval enable_$ac_feature=\$ac_optarg ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-    ac_prev=htmldir ;;
-  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-  | --ht=*)
-    htmldir=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localedir | --localedir | --localedi | --localed | --locale)
-    ac_prev=localedir ;;
-  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-    localedir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst | --locals)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-    ac_prev=pdfdir ;;
-  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-    pdfdir=$ac_optarg ;;
-
-  -psdir | --psdir | --psdi | --psd | --ps)
-    ac_prev=psdir ;;
-  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-    psdir=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval with_$ac_package=\$ac_optarg ;;
-
-  -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval with_$ac_package=no ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
-    eval $ac_envvar=\$ac_optarg
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute directory names.
-for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
-		datadir sysconfdir sharedstatedir localstatedir includedir \
-		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-		libdir localedir mandir
-do
-  eval ac_val=\$$ac_var
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* )  continue;;
-    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-  esac
-  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; }
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used." >&2
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  { echo "$as_me: error: Working directory cannot be determined" >&2
-   { (exit 1); exit 1; }; }
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  { echo "$as_me: error: pwd does not report name of working directory" >&2
-   { (exit 1); exit 1; }; }
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r "$srcdir/$ac_unique_file"; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
-  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
-   { (exit 1); exit 1; }; }
-	pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
-  srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
-  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_env_${ac_var}_value=\$${ac_var}
-  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR          info documentation [DATAROOTDIR/info]
-  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR           man documentation [DATAROOTDIR/man]
-  --docdir=DIR           documentation root [DATAROOTDIR/doc/PACKAGE]
-  --htmldir=DIR          html documentation [DOCDIR]
-  --dvidir=DIR           dvi documentation [DOCDIR]
-  --pdfdir=DIR           pdf documentation [DOCDIR]
-  --psdir=DIR            ps documentation [DOCDIR]
-_ACEOF
-
-  cat <<\_ACEOF
-
-X features:
-  --x-includes=DIR    X include files are in DIR
-  --x-libraries=DIR   X library files are in DIR
-
-System types:
-  --build=BUILD     configure for building on BUILD [guessed]
-  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
-  cat <<\_ACEOF
-
-Optional Features:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --enable-debug          enable debug options [default=no]
-  --enable-libraries      build and install libraries [default=yes]
-  --enable-server         build and install server [default=yes]
-  --enable-client         build and install clients [default=no]
-  --enable-client-utmp    write utmp with client [default=yes if not modern BSD]
-  --enable-Wnn            build and install Wnn [default=yes]
-  --enable-cWnn           build and install cWnn [default=no]
-  --enable-kWnn           build and install kWnn [default=no]
-  --enable-ipv6           build and install IPv6 [default=no]
-  --enable-unsafe-path    allow creating files in an arbitrary path [default=no]
-  --enable-shared[=PKGS]  build shared libraries [default=yes]
-  --enable-static[=PKGS]  build static libraries [default=yes]
-  --enable-fast-install[=PKGS]
-                          optimize for fast installation [default=yes]
-  --disable-libtool-lock  avoid locking (might break parallel builds)
-
-Optional Packages:
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-libwnn             use installed Wnn library [default=no]
-  --with-wnn-includes=DIR   WNN include files are in DIR
-  --with-wnn-libraries=DIR  Search for WNN libraries in DIR [default=/usr/local/lib]
-  --with-libcwnn            use installed cWnn library [default=no]
-  --with-cwnn-includes=DIR  CWNN include files are in DIR
-  --with-cwnn-libraries=DIR Search for CWNN libraries in DIR [default=/usr/local/lib]
-  --with-libkwnn            use installed kWnn library [default=no]
-  --with-kwnn-includes=DIR  KWNN include files are in DIR
-  --with-kwnn-libraries=DIR Search for KWNN libraries in DIR [default=/usr/local/lib]
-  --with-pic              try to use only PIC/non-PIC objects [default=use
-                          both]
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
-  --with-x                use the X Window System
-  --with-term-libs=-lLIB  terminal library to be used
-  --with-libwrap[=DIR]    Compile in libwrap (tcp_wrappers) support [default=try to find libwrap]
-
-Some influential environment variables:
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
-              you have headers in a nonstandard directory <include dir>
-  CPP         C preprocessor
-  XMKMF       Path to xmkmf, Makefile generator for X Window System
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" || continue
-    ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-    cd "$ac_dir" || { ac_status=$?; continue; }
-    # Check for guested configure.
-    if test -f "$ac_srcdir/configure.gnu"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-    elif test -f "$ac_srcdir/configure"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure" --help=recursive
-    else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi || ac_status=$?
-    cd "$ac_pwd" || { ac_status=$?; break; }
-  done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
-  cat <<\_ACEOF
-configure
-generated by GNU Autoconf 2.60
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit
-fi
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.60.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
-done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *\'*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-    2)
-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-      if test $ac_must_keep_next = true; then
-	ac_must_keep_next=false # Got value, back to normal.
-      else
-	case $ac_arg in
-	  *=* | --config-cache | -C | -disable-* | --disable-* \
-	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-	  | -with-* | --with-* | -without-* | --without-* | --x)
-	    case "$ac_configure_args0 " in
-	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-	    esac
-	    ;;
-	  -* ) ac_must_keep_next=true ;;
-	esac
-      fi
-      ac_configure_args="$ac_configure_args '$ac_arg'"
-      ;;
-    esac
-  done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      *) $as_unset $ac_var ;;
-      esac ;;
-    esac
-  done
-  (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      sed -n \
-	"s/'\''/'\''\\\\'\'''\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-      ;; #(
-    *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-)
-    echo
-
-    cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      echo "$ac_var='\''$ac_val'\''"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      cat <<\_ASBOX
-## ------------------- ##
-## File substitutions. ##
-## ------------------- ##
-_ASBOX
-      echo
-      for ac_var in $ac_subst_files
-      do
-	eval ac_val=\$$ac_var
-	case $ac_val in
-	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-	esac
-	echo "$ac_var='\''$ac_val'\''"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
-      echo
-      cat confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -n "$CONFIG_SITE"; then
-  set x "$CONFIG_SITE"
-elif test "x$prefix" != xNONE; then
-  set x "$prefix/share/config.site" "$prefix/etc/config.site"
-else
-  set x "$ac_default_prefix/share/config.site" \
-	"$ac_default_prefix/etc/config.site"
-fi
-shift
-for ac_site_file
-do
-  if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special
-  # files actually), so we avoid doing that.
-  if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-      *)                      . "./$cache_file";;
-    esac
-  fi
-else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-	ac_cache_corrupted=:
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-ac_config_headers="$ac_config_headers config.h"
-
-
-
-# Quick and Dirty workaround for Autoconf-2.53 and Libtools-1.5 pair ...
-# not to use additional tagged configuration. (default: CXX F77)
-# NOTICE: Please remove next line if situation changes. (aono)
-tagnames=
-
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-  if test -f "$ac_dir/install-sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f "$ac_dir/install.sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f "$ac_dir/shtool"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
-   { (exit 1); exit 1; }; }
-
-{ echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
-if test "${ac_cv_build+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
-  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
-  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-   { (exit 1); exit 1; }; }
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-echo "$as_me: error: invalid value of canonical build" >&2;}
-   { (exit 1); exit 1; }; };;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
-if test "${ac_cv_host+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "x$host_alias" = x; then
-  ac_cv_host=$ac_cv_build
-else
-  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-echo "$as_me: error: invalid value of canonical host" >&2;}
-   { (exit 1); exit 1; }; };;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-
-
-# Check whether --enable-debug was given.
-if test "${enable_debug+set}" = set; then
-  enableval=$enable_debug; case "${enableval}" in
-   yes) debug=true ;;
-   no)  debug=false ;;
-   *)   { { echo "$as_me:$LINENO: error: bad value for --enable-debug" >&5
-echo "$as_me: error: bad value for --enable-debug" >&2;}
-   { (exit 1); exit 1; }; }
-esac
-else
-  debug=false
-fi
-
-
-# Check whether --enable-libraries was given.
-if test "${enable_libraries+set}" = set; then
-  enableval=$enable_libraries; case "${enableval}" in
-   yes) libraries=true ;;
-   no)  libraries=false ;;
-   *)   { { echo "$as_me:$LINENO: error: bad value for --enable-libraries" >&5
-echo "$as_me: error: bad value for --enable-libraries" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  libraries=true
-fi
-
-
-# Check whether --enable-server was given.
-if test "${enable_server+set}" = set; then
-  enableval=$enable_server; case "${enableval}" in
-   yes) server=true ;;
-   no)  server=false ;;
-   *)   { { echo "$as_me:$LINENO: error: bad value for --enable-server" >&5
-echo "$as_me: error: bad value for --enable-server" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  server=true
-fi
-
-
-# Check whether --enable-client was given.
-if test "${enable_client+set}" = set; then
-  enableval=$enable_client; case "${enableval}" in
-   yes) client=true ;;
-   no)  client=false ;;
-   *)   { { echo "$as_me:$LINENO: error: bad value for --enable-client" >&5
-echo "$as_me: error: bad value for --enable-client" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  client=false
-fi
-
-
-# Check whether --enable-client-utmp was given.
-if test "${enable_client_utmp+set}" = set; then
-  enableval=$enable_client_utmp; case "${enableval}" in
-   yes) client_utmp=true ;;
-   no)  client_utmp=false ;;
-   *)   { { echo "$as_me:$LINENO: error: bad value for --enable-client-utmp" >&5
-echo "$as_me: error: bad value for --enable-client-utmp" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  client_utmp=auto
-
-fi
-
-
-if test $libraries = true; then
-	SUBDIRS="\$(LIB_SUBDIRS)"
-	WNNMANDIR="\$(LIB_WNNMANDIR)"
-fi
-if test $server = true; then
-	SUBDIRS="$SUBDIRS \$(SERVER_SUBDIRS)"
-	WNNMANDIR="$WNNMANDIR \$(SERVER_WNNMANDIR)"
-fi
-if test $client = true; then
-	SUBDIRS="$SUBDIRS \$(CLIENT_SUBDIRS)"
-fi
-
-
-
-
-
-# Check whether --enable-Wnn was given.
-if test "${enable_Wnn+set}" = set; then
-  enableval=$enable_Wnn; case "${enableval}" in
-   yes) Wnn="Wnn";;
-   no)  Wnn="" ;;
-   *)   { { echo "$as_me:$LINENO: error: bad value for --enable-Wnn" >&5
-echo "$as_me: error: bad value for --enable-Wnn" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  Wnn="Wnn"
-fi
-
-
-
-if test "$server" = true -a "$Wnn" = Wnn; then
-#	JSERVER_SUBDIRS1="\$(JSERVER_SUBDIRS1)"
-	JSERVER_SUBDIRS2="\$(JSERVER_SUBDIRS2)"
-else
-#	JSERVER_SUBDIRS1=""
-	JSERVER_SUBDIRS2=""
-fi
-
-
-# Check whether --enable-cWnn was given.
-if test "${enable_cWnn+set}" = set; then
-  enableval=$enable_cWnn; case "${enableval}" in
-   yes) cWnn="cWnn" ;;
-   no)  cWnn="" ;;
-   *)   { { echo "$as_me:$LINENO: error: bad value for --enable-cWnn" >&5
-echo "$as_me: error: bad value for --enable-cWnn" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  cWnn=""
-fi
-
-
-
-# Check whether --enable-kWnn was given.
-if test "${enable_kWnn+set}" = set; then
-  enableval=$enable_kWnn; case "${enableval}" in
-   yes) kWnn="kWnn" ;;
-   no)  kWnn="" ;;
-   *)   { { echo "$as_me:$LINENO: error: bad value for --enable-kWnn" >&5
-echo "$as_me: error: bad value for --enable-kWnn" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  kWnn=""
-fi
-
-
-
-
-
-
-# Check whether --with-libwnn was given.
-if test "${with_libwnn+set}" = set; then
-  withval=$with_libwnn;   with_libwnn="${withval}"
-
-# Check whether --with-wnn-includes was given.
-if test "${with_wnn_includes+set}" = set; then
-  withval=$with_wnn_includes; wnnincludedir="-I${withval}"
-else
-  wnnincludedir=''
-fi
-
-
-# Check whether --with-wnn-libraries was given.
-if test "${with_wnn_libraries+set}" = set; then
-  withval=$with_wnn_libraries; wnnlibdir="${withval}"
-else
-  wnnlibdir='/usr/local/lib'
-fi
-
-	if test "X${with_libwnn}" = X-lwnn; then
-		WNNJLIB="-L${wnnlibdir} -lwnn"
-	elif test X"`echo ${with_libwnn} | grep '^/.*'`" != X ; then
-		WNNJLIB="${with_libwnn}"
-	else
-		WNNJLIB="${wnnlibdir}/libwnn.a"
-	fi
-	DEPWNNJLIB=""
-	HINSI_DATA="\$(JWNNWNNDIR)/hinsi.data"
-
-else
-  	WNNJLIB="\$(top_builddir)/Wnn/jlib/libwnn.la"
-	DEPWNNJLIB="\$(WNNJLIB)"
-	HINSI_DATA="\$(top_builddir)/Wnn/jd/hinsi.data"
-
-fi
-
-
-
-
-
-
-# Check whether --with-libcwnn was given.
-if test "${with_libcwnn+set}" = set; then
-  withval=$with_libcwnn;
-
-# Check whether --with-cwnn-includes was given.
-if test "${with_cwnn_includes+set}" = set; then
-  withval=$with_cwnn_includes; cwnnincludedir="-I${withval}"
-else
-  cwnnincludedir=''
-fi
-
-
-# Check whether --with-cwnn-libraries was given.
-if test "${with_cwnn_libraries+set}" = set; then
-  withval=$with_cwnn_libraries; cwnnlibdir="${withval}"
-else
-  cwnnlibdir='/usr/local/lib'
-fi
-
-	if test "X${with_libcwnn}" = X-lcwnn; then
-		CWNNJLIB="-L${cwnnlibdir} -lcwnn"
-	elif test X"`echo ${with_libcwnn} | grep '^/.*'`" != X ; then
-		CWNNJLIB="${with_libcwnn}"
-	else
-		CWNNJLIB="${cwnnlibdir}/libcwnn.a"
-	fi
-	DEPCWNNJLIB=""
-	CHINSI_DATA="\$(CWNNWNNDIR)/cixing.data"
-	THINSI_DATA="\$(TWNNTDSRC)/cixing.data"
-
-else
-  	CWNNJLIB="\$(top_builddir)/cWnn/jlib/libcwnn.la"
-	DEPCWNNJLIB="\$(CWNNJLIB)"
-	CHINSI_DATA="\$(CWNNCDSRC)/cixing.data"
-	THINSI_DATA="\$(TWNNTDSRC)/cixing.data"
-
-fi
-
-
-
-
-
-
-
-# Check whether --with-libkwnn was given.
-if test "${with_libkwnn+set}" = set; then
-  withval=$with_libkwnn;
-
-# Check whether --with-kwnn-includes was given.
-if test "${with_kwnn_includes+set}" = set; then
-  withval=$with_kwnn_includes; kwnnincludedir="-I${withval}"
-else
-  kwnnincludedir=''
-fi
-
-
-# Check whether --with-kwnn-libraries was given.
-if test "${with_kwnn_libraries+set}" = set; then
-  withval=$with_kwnn_libraries; kwnnlibdir="${withval}"
-else
-  kwnnlibdir='/usr/local/lib'
-fi
-
-	if test "X${with_libkwnn}" = X-lkwnn; then
-		KWNNJLIB="-L${kwnnlibdir} -lkwnn"
-	elif test X"`echo ${with_libkwnn} | grep '^/.*'`" != X ; then
-		KWNNJLIB="${with_libkwnn}"
-	else
-		KWNNJLIB="${kwnnlibdir}/libkwnn.a"
-	fi
-	DEPKWNNJLIB=""
-	KHINSI_DATA="\$(KWNNWNNDIR)/hinsi.data"
-
-else
-  	KWNNJLIB="\$(top_builddir)/kWnn/jlib/libkwnn.la"
-	DEPKWNNJLIB="\$(KWNNJLIB)"
-	KHINSI_DATA="\$(KWNNKDSRC)/hinsi.data"
-
-fi
-
-
-
-
-
-
-# Check whether --enable-ipv6 was given.
-if test "${enable_ipv6+set}" = set; then
-  enableval=$enable_ipv6; case "${enableval}" in
-   yes) ipv6="-DINET6";;
-   no)  ipv6="" ;;
-   *)   { { echo "$as_me:$LINENO: error: bad value for --enable-ipv6" >&5
-echo "$as_me: error: bad value for --enable-ipv6" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  ipv6=""
-fi
-
-
-
-# Check whether --enable-unsafe-path was given.
-if test "${enable_unsafe_path+set}" = set; then
-  enableval=$enable_unsafe_path; case "${enableval}" in
-   yes) unsafe_path=true;;
-   no)  unsafe_path=false;;
-   *)   { { echo "$as_me:$LINENO: error: bad value for --enable-unsafe-path" >&5
-echo "$as_me: error: bad value for --enable-unsafe-path" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  unsafe_path=false
-fi
-
-
-
-if test ${unsafe_path} = true; then
-
-cat >>confdefs.h <<\_ACEOF
-#define WNN_ALLOW_UNSAFE_PATH 1
-_ACEOF
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-          if test -n "$ac_tool_prefix"; then
-    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-  fi
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl.exe
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl.exe
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CC" && break
-done
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-#
-# List of possible output files, starting from the most likely.
-# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-# only as a last resort.  b.out is created by i960 compilers.
-ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-#
-# The IRIX 6 linker writes into existing files which may not be
-# executable, retaining their permissions.  Remove them first so a
-# subsequent execution test works.
-ac_rmfiles=
-for ac_file in $ac_files
-do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-  esac
-done
-rm -f $ac_rmfiles
-
-if { (ac_try="$ac_link_default"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link_default") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile.  We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files
-do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
-	;;
-    [ab].out )
-	# We found the default executable, but exeext='' is most
-	# certainly right.
-	break;;
-    *.* )
-        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-	then :; else
-	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	fi
-	# We set ac_cv_exeext here because the later test for it is not
-	# safe: cross compilers may not add the suffix if given an `-o'
-	# argument, so we may need to know it at that point already.
-	# Even if this section looks crufty: it has the advantage of
-	# actually working.
-	break;;
-    * )
-	break;;
-  esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6; }
-
-# Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
-  if { ac_try='./$ac_file'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
-	cross_compiling=yes
-    else
-	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-  fi
-fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6; }
-
-{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	  break;;
-    * ) break;;
-  esac
-done
-else
-  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
-if test "${ac_cv_objext+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  for ac_file in conftest.o conftest.obj conftest.*; do
-  test -f "$ac_file" || continue;
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-       break;;
-  esac
-done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_compiler_gnu=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_save_c_werror_flag=$ac_c_werror_flag
-   ac_c_werror_flag=yes
-   ac_cv_prog_cc_g=no
-   CFLAGS="-g"
-   cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	CFLAGS=""
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_c_werror_flag=$ac_save_c_werror_flag
-	 CFLAGS="-g"
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-   inside strings and character constants.  */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_c89=$ac_arg
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
-  x)
-    { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; } ;;
-  xno)
-    { echo "$as_me:$LINENO: result: unsupported" >&5
-echo "${ECHO_T}unsupported" >&6; } ;;
-  *)
-    CC="$CC $ac_cv_prog_cc_c89"
-    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-case $host in
-*-*-linux*)
-    CCOPTIONS="-Dlinux -D_GNU_SOURCE -D_POSIX_SOURCE -D_BSD_SOURCE"
-    ;;
-*-*-darwin*)
-    if test $GCC = yes; then
-      # Unfortunately, autoconf (at least 2.57) does not recognize
-      # proper CPP. (Normal cpp-precomp nor auto-retrying in basic mode does
-      # not work with pubdic+ processing.) So define here ....
-      # Note: It seems gcc-3.3 (or (probably) later) does not need this.
-      CPP=${CPP:-"$CC -E -no-cpp-precomp"}
-    fi
-    # Don't care other CC-s.
-    ;;
-*-*-sunos*)
-      if test $GCC = yes; then
-	CCOPTIONS="-Dsun -Dsparc"
-      else
-        CCOPTIONS=""
-      fi
-      ;;
-*-*-solaris2.*)
-    # Will 'solaris*' be OK?
-      if test $GCC = yes; then
-        CCOPTIONS="-Dsun -D`uname -p` -DSVR4 -DSYSV"
-      else
-        CCOPTIONS="-Xc -xF -xcg92 -Dsun -D`uname -p` -DSVR4 -DSYSV"
-      fi
-    ;;
-*-*-hpux*)
-    if test $GCC = yes; then
-        CCOPTIONS="-Dhpux -DSYSV"
-    else
-        CCOPTIONS="-Ae -Dhpux -DSYSV"
-    fi
-      ;;
-i[34567]86-pc-beos*)
-	CCOPTIONS="-DBEOS -D_POSIX_SOURCE -D_BSD_SOURCE"
-	;;
-powerpc-*-beos*)
-	CCOPTIONS="-DBEOS -D_POSIX_SOURCE -D_BSD_SOURCE"
-	;;
-*-*-aix*)
-    CCOPTIONS="-DSYSV"
-    ;;
-esac
-
-if test $debug = true; then
-    if test $GCC = yes; then
-      # FIXME: gcc -fstack-check doesn't work well on Linux/i386 ...
-      CDEBUGFLAGS=${CDEBUGFLAGS:-"-g2 -O2 -Wall"}
-    else
-      CDEBUGFLAGS=${CDEBUGFLAGS:-""}
-    fi
-    INSTPGMFLAGS=
-else
-    CDEBUGFLAGS=${CDEBUGFLAGS:-""}
-    INSTPGMFLAGS="-s"
-fi
-
-
-
-
-echo "Set CDEBUGFLAGS and CCOPTIONS to following:"
-echo '  CDEBUGFLAGS="'"$CDEBUGFLAGS"'"'
-echo '    CCOPTIONS="'"$CCOPTIONS"'"'
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-{ echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
-else
-  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; }; then
-	  if test $ac_prog = install &&
-	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
-	  else
-	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	    break 3
-	  fi
-	fi
-      done
-    done
-    ;;
-esac
-done
-IFS=$as_save_IFS
-
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    INSTALL=$ac_install_sh
-  fi
-fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6; }
-fi
-
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
-	@echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
-  *@@@%%%=?*=@@@%%%*)
-    eval ac_cv_prog_make_${ac_make}_set=yes;;
-  *)
-    eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-  SET_MAKE=
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-case `pwd` in
-  *\ * | *\	*)
-    { echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
-echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
-esac
-
-
-
-macro_version='2.2.6'
-macro_revision='1.3012'
-
-
-
-
-
-
-
-
-
-
-
-
-
-ltmain="$ac_aux_dir/ltmain.sh"
-
-{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
-if test "${ac_cv_path_SED+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
-     for ac_i in 1 2 3 4 5 6 7; do
-       ac_script="$ac_script$as_nl$ac_script"
-     done
-     echo "$ac_script" | sed 99q >conftest.sed
-     $as_unset ac_script || ac_script=
-     # Extract the first word of "sed gsed" to use in msg output
-if test -z "$SED"; then
-set dummy sed gsed; ac_prog_name=$2
-if test "${ac_cv_path_SED+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_path_SED_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_prog in sed gsed; do
-  for ac_exec_ext in '' $ac_executable_extensions; do
-    ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
-    { test -f "$ac_path_SED" && $as_executable_p "$ac_path_SED"; } || continue
-    # Check for GNU ac_path_SED and select it if it is found.
-  # Check for GNU $ac_path_SED
-case `"$ac_path_SED" --version 2>&1` in
-*GNU*)
-  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
-*)
-  ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    echo '' >> "conftest.nl"
-    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
-    if test $ac_count -gt ${ac_path_SED_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_SED="$ac_path_SED"
-      ac_path_SED_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
-    $ac_path_SED_found && break 3
-  done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-SED="$ac_cv_path_SED"
-if test -z "$SED"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-else
-  ac_cv_path_SED=$SED
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
-echo "${ECHO_T}$ac_cv_path_SED" >&6; }
- SED="$ac_cv_path_SED"
-  rm -f conftest.sed
-
-test -z "$SED" && SED=sed
-Xsed="$SED -e 1s/^X//"
-
-
-
-
-
-
-
-
-
-
-
-{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # Extract the first word of "grep ggrep" to use in msg output
-if test -z "$GREP"; then
-set dummy grep ggrep; ac_prog_name=$2
-if test "${ac_cv_path_GREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_path_GREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_prog in grep ggrep; do
-  for ac_exec_ext in '' $ac_executable_extensions; do
-    ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-    { test -f "$ac_path_GREP" && $as_executable_p "$ac_path_GREP"; } || continue
-    # Check for GNU ac_path_GREP and select it if it is found.
-  # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
-  ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    echo 'GREP' >> "conftest.nl"
-    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
-    if test $ac_count -gt ${ac_path_GREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_GREP="$ac_path_GREP"
-      ac_path_GREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
-    $ac_path_GREP_found && break 3
-  done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-GREP="$ac_cv_path_GREP"
-if test -z "$GREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-else
-  ac_cv_path_GREP=$GREP
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-   then ac_cv_path_EGREP="$GREP -E"
-   else
-     # Extract the first word of "egrep" to use in msg output
-if test -z "$EGREP"; then
-set dummy egrep; ac_prog_name=$2
-if test "${ac_cv_path_EGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_path_EGREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_prog in egrep; do
-  for ac_exec_ext in '' $ac_executable_extensions; do
-    ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-    { test -f "$ac_path_EGREP" && $as_executable_p "$ac_path_EGREP"; } || continue
-    # Check for GNU ac_path_EGREP and select it if it is found.
-  # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
-  ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    echo 'EGREP' >> "conftest.nl"
-    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
-    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_EGREP="$ac_path_EGREP"
-      ac_path_EGREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
-    $ac_path_EGREP_found && break 3
-  done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-EGREP="$ac_cv_path_EGREP"
-if test -z "$EGREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-else
-  ac_cv_path_EGREP=$EGREP
-fi
-
-
-   fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ echo "$as_me:$LINENO: checking for fgrep" >&5
-echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; }
-if test "${ac_cv_path_FGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
-   then ac_cv_path_FGREP="$GREP -F"
-   else
-     # Extract the first word of "fgrep" to use in msg output
-if test -z "$FGREP"; then
-set dummy fgrep; ac_prog_name=$2
-if test "${ac_cv_path_FGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_path_FGREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_prog in fgrep; do
-  for ac_exec_ext in '' $ac_executable_extensions; do
-    ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
-    { test -f "$ac_path_FGREP" && $as_executable_p "$ac_path_FGREP"; } || continue
-    # Check for GNU ac_path_FGREP and select it if it is found.
-  # Check for GNU $ac_path_FGREP
-case `"$ac_path_FGREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
-*)
-  ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    echo 'FGREP' >> "conftest.nl"
-    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
-    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_FGREP="$ac_path_FGREP"
-      ac_path_FGREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
-    $ac_path_FGREP_found && break 3
-  done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-FGREP="$ac_cv_path_FGREP"
-if test -z "$FGREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-else
-  ac_cv_path_FGREP=$FGREP
-fi
-
-
-   fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
-echo "${ECHO_T}$ac_cv_path_FGREP" >&6; }
- FGREP="$ac_cv_path_FGREP"
-
-
-test -z "$GREP" && GREP=grep
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | ?:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
-      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  { echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-else
-  { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-fi
-if test "${lt_cv_path_LD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  { echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
-
-
-
-
-
-
-{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
-echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; }
-if test "${lt_cv_path_NM+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-	#   nm: unknown option "B" ignored
-	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
-	  lt_cv_path_NM="$tmp_nm -B"
-	  break
-	  ;;
-	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	  */dev/null*)
-	    lt_cv_path_NM="$tmp_nm -p"
-	    break
-	    ;;
-	  *)
-	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	    continue # so that we can try to find one that supports BSD flags
-	    ;;
-	  esac
-	  ;;
-	esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-echo "${ECHO_T}$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
-else
-  # Didn't find any BSD compatible name lister, look for dumpbin.
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_DUMPBIN+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$DUMPBIN"; then
-  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-DUMPBIN=$ac_cv_prog_DUMPBIN
-if test -n "$DUMPBIN"; then
-  { echo "$as_me:$LINENO: result: $DUMPBIN" >&5
-echo "${ECHO_T}$DUMPBIN" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-    test -n "$DUMPBIN" && break
-  done
-fi
-if test -z "$DUMPBIN"; then
-  ac_ct_DUMPBIN=$DUMPBIN
-  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_DUMPBIN"; then
-  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
-if test -n "$ac_ct_DUMPBIN"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
-echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-  test -n "$ac_ct_DUMPBIN" && break
-done
-
-  if test "x$ac_ct_DUMPBIN" = x; then
-    DUMPBIN=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    DUMPBIN=$ac_ct_DUMPBIN
-  fi
-fi
-
-
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
-  fi
-fi
-test -z "$NM" && NM=nm
-
-
-
-
-
-
-{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
-echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; }
-if test "${lt_cv_nm_interface+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_nm_interface="BSD nm"
-  echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:4468: $ac_compile\"" >&5)
-  (eval "$ac_compile" 2>conftest.err)
-  cat conftest.err >&5
-  (eval echo "\"\$as_me:4471: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
-  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
-  cat conftest.err >&5
-  (eval echo "\"\$as_me:4474: output\"" >&5)
-  cat conftest.out >&5
-  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
-    lt_cv_nm_interface="MS dumpbin"
-  fi
-  rm -f conftest*
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
-echo "${ECHO_T}$lt_cv_nm_interface" >&6; }
-
-# find the maximum length of command line arguments
-{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-    i=0
-  teststring="ABCD"
-
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  cygwin* | mingw* | cegcc*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
-
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
-
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      # Make teststring a little bigger before we do anything with it.
-      # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
-        teststring=$teststring$teststring
-      done
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      # If test is not a shell built-in, we'll probably end up computing a
-      # maximum length that is only half of the actual maximum length, but
-      # we can't tell.
-      while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
-	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
-	      test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      # Only check the string length outside the loop.
-      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on
-      # massive amounts of additional arguments before passing them to the
-      # linker.  It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
-    ;;
-  esac
-
-fi
-
-if test -n $lt_cv_sys_max_cmd_len ; then
-  { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
-else
-  { echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6; }
-fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-
-
-
-
-
-: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-
-{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
-echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-{ echo "$as_me:$LINENO: result: $xsi_shell" >&5
-echo "${ECHO_T}$xsi_shell" >&6; }
-
-
-{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
-echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5
-echo "${ECHO_T}$lt_shell_append" >&6; }
-
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  lt_unset=unset
-else
-  lt_unset=false
-fi
-
-
-
-
-
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  lt_SP2NL='tr \040 \012'
-  lt_NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  lt_SP2NL='tr \100 \n'
-  lt_NL2SP='tr \r\n \100\100'
-  ;;
-esac
-
-
-
-
-
-
-
-
-
-{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
-
-
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-OBJDUMP=$ac_cv_prog_OBJDUMP
-if test -n "$OBJDUMP"; then
-  { echo "$as_me:$LINENO: result: $OBJDUMP" >&5
-echo "${ECHO_T}$OBJDUMP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OBJDUMP"; then
-  ac_ct_OBJDUMP=$OBJDUMP
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_OBJDUMP"; then
-  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_OBJDUMP="objdump"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
-if test -n "$ac_ct_OBJDUMP"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
-echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_OBJDUMP" = x; then
-    OBJDUMP="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    OBJDUMP=$ac_ct_OBJDUMP
-  fi
-else
-  OBJDUMP="$ac_cv_prog_OBJDUMP"
-fi
-
-test -z "$OBJDUMP" && OBJDUMP=objdump
-
-
-
-
-
-
-
-
-
-{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
-echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[4-9]*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi[45]*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
-  ;;
-
-mingw* | pw32*)
-  # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-  # unless we find 'file', for example because we are cross-compiling.
-  if ( file / ) >/dev/null 2>&1; then
-    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-    lt_cv_file_magic_cmd='func_win32_libid'
-  else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-    lt_cv_file_magic_cmd='$OBJDUMP -f'
-  fi
-  ;;
-
-cegcc)
-  # use the weaker test based on 'objdump'. See mingw*.
-  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  case $host_cpu in
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  hppa*64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-    ;;
-  *)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  esac
-  ;;
-
-interix[3-9]*)
-  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $LD in
-  *-32|*"-32 ") libmagic=32-bit;;
-  *-n32|*"-n32 ") libmagic=N32;;
-  *-64|*"-64 ") libmagic=64-bit;;
-  *) libmagic=never-match;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-*nto* | *qnx*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-rdos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.3*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  pc)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  esac
-  ;;
-
-tpf*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-
-
-
-
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AR="${ac_tool_prefix}ar"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
-  { echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
-  ac_ct_AR=$AR
-  # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_AR"; then
-  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_AR="ar"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-echo "${ECHO_T}$ac_ct_AR" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_AR" = x; then
-    AR="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    AR=$ac_ct_AR
-  fi
-else
-  AR="$ac_cv_prog_AR"
-fi
-
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-
-
-
-
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-test -z "$STRIP" && STRIP=:
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  { echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_RANLIB" = x; then
-    RANLIB=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    RANLIB=$ac_ct_RANLIB
-  fi
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-test -z "$RANLIB" && RANLIB=:
-
-
-
-
-
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[BCDT]'
-  ;;
-cygwin* | mingw* | pw32* | cegcc*)
-  symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDEGRST]'
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[BCDEGRST]'
-  ;;
-osf*)
-  symcode='[BCDEGQRST]'
-  ;;
-solaris*)
-  symcode='[BDRT]'
-  ;;
-sco3.2v5*)
-  symcode='[DT]'
-  ;;
-sysv4.2uw2*)
-  symcode='[DT]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[ABDT]'
-  ;;
-sysv4)
-  symcode='[DFNSTU]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[ABCDGIRSTW]' ;;
-esac
-
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
-
-  # Write the raw and C identifiers.
-  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
-    # Also find C++ and __fastcall symbols from MSVC++,
-    # which start with @ or ?.
-    lt_cv_sys_global_symbol_pipe="$AWK '"\
-"     {last_section=section; section=\$ 3};"\
-"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-"     \$ 0!~/External *\|/{next};"\
-"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-"     {if(hide[section]) next};"\
-"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
-"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-"     ' prfx=^$ac_symprfx"
-  else
-    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-  fi
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
-
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
-	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<_LT_EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-_LT_EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
-
-	  cat <<_LT_EOF >> conftest.$ac_ext
-
-/* The mapping between symbol names and symbols.  */
-const struct {
-  const char *name;
-  void       *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[] =
-{
-  { "@PROGRAM@", (void *) 0 },
-_LT_EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
-	  cat <<\_LT_EOF >> conftest.$ac_ext
-  {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&5
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-
-fi
-
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  { echo "$as_me:$LINENO: result: failed" >&5
-echo "${ECHO_T}failed" >&6; }
-else
-  { echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6; }
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-      *ELF-32*)
-	HPUX_IA64_MODE="32"
-	;;
-      *ELF-64*)
-	HPUX_IA64_MODE="64"
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 5685 "configure"' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -melf32bsmip"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -melf32bmipn32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -melf64bmip"
-	;;
-      esac
-    else
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -32"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -n32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -64"
-	  ;;
-      esac
-    fi
-  fi
-  rm -rf conftest*
-  ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.o` in
-      *32-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_i386_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
-	    ;;
-	  ppc64-*linux*|powerpc64-*linux*)
-	    LD="${LD-ld} -m elf32ppclinux"
-	    ;;
-	  s390x-*linux*)
-	    LD="${LD-ld} -m elf_s390"
-	    ;;
-	  sparc64-*linux*)
-	    LD="${LD-ld} -m elf32_sparc"
-	    ;;
-	esac
-	;;
-      *64-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_x86_64_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_x86_64"
-	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
-	    LD="${LD-ld} -m elf64ppc"
-	    ;;
-	  s390*-*linux*|s390*-*tpf*)
-	    LD="${LD-ld} -m elf64_s390"
-	    ;;
-	  sparc*-*linux*)
-	    LD="${LD-ld} -m elf64_sparc"
-	    ;;
-	esac
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-     cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  lt_cv_cc_needs_belf=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	lt_cv_cc_needs_belf=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-     ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-sparc*-*solaris*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.o` in
-    *64-bit*)
-      case $lt_cv_prog_gnu_ld in
-      yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)
-	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-	  LD="${LD-ld} -64"
-	fi
-	;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-esac
-
-need_locks="$enable_libtool_lock"
-
-
-  case $host_os in
-    rhapsody* | darwin*)
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$DSYMUTIL"; then
-  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-DSYMUTIL=$ac_cv_prog_DSYMUTIL
-if test -n "$DSYMUTIL"; then
-  { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
-echo "${ECHO_T}$DSYMUTIL" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_DSYMUTIL"; then
-  ac_ct_DSYMUTIL=$DSYMUTIL
-  # Extract the first word of "dsymutil", so it can be a program name with args.
-set dummy dsymutil; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_DSYMUTIL"; then
-  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
-if test -n "$ac_ct_DSYMUTIL"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
-echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_DSYMUTIL" = x; then
-    DSYMUTIL=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    DSYMUTIL=$ac_ct_DSYMUTIL
-  fi
-else
-  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
-fi
-
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
-set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_NMEDIT+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$NMEDIT"; then
-  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-NMEDIT=$ac_cv_prog_NMEDIT
-if test -n "$NMEDIT"; then
-  { echo "$as_me:$LINENO: result: $NMEDIT" >&5
-echo "${ECHO_T}$NMEDIT" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_NMEDIT"; then
-  ac_ct_NMEDIT=$NMEDIT
-  # Extract the first word of "nmedit", so it can be a program name with args.
-set dummy nmedit; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_NMEDIT"; then
-  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_NMEDIT="nmedit"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
-if test -n "$ac_ct_NMEDIT"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
-echo "${ECHO_T}$ac_ct_NMEDIT" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_NMEDIT" = x; then
-    NMEDIT=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    NMEDIT=$ac_ct_NMEDIT
-  fi
-else
-  NMEDIT="$ac_cv_prog_NMEDIT"
-fi
-
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
-set dummy ${ac_tool_prefix}lipo; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_LIPO+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$LIPO"; then
-  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-LIPO=$ac_cv_prog_LIPO
-if test -n "$LIPO"; then
-  { echo "$as_me:$LINENO: result: $LIPO" >&5
-echo "${ECHO_T}$LIPO" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_LIPO"; then
-  ac_ct_LIPO=$LIPO
-  # Extract the first word of "lipo", so it can be a program name with args.
-set dummy lipo; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_LIPO"; then
-  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_LIPO="lipo"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
-if test -n "$ac_ct_LIPO"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
-echo "${ECHO_T}$ac_ct_LIPO" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_LIPO" = x; then
-    LIPO=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    LIPO=$ac_ct_LIPO
-  fi
-else
-  LIPO="$ac_cv_prog_LIPO"
-fi
-
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}otool; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_OTOOL+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$OTOOL"; then
-  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL=$ac_cv_prog_OTOOL
-if test -n "$OTOOL"; then
-  { echo "$as_me:$LINENO: result: $OTOOL" >&5
-echo "${ECHO_T}$OTOOL" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OTOOL"; then
-  ac_ct_OTOOL=$OTOOL
-  # Extract the first word of "otool", so it can be a program name with args.
-set dummy otool; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_OTOOL"; then
-  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_OTOOL="otool"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
-if test -n "$ac_ct_OTOOL"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
-echo "${ECHO_T}$ac_ct_OTOOL" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_OTOOL" = x; then
-    OTOOL=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    OTOOL=$ac_ct_OTOOL
-  fi
-else
-  OTOOL="$ac_cv_prog_OTOOL"
-fi
-
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
-set dummy ${ac_tool_prefix}otool64; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_OTOOL64+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$OTOOL64"; then
-  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL64=$ac_cv_prog_OTOOL64
-if test -n "$OTOOL64"; then
-  { echo "$as_me:$LINENO: result: $OTOOL64" >&5
-echo "${ECHO_T}$OTOOL64" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OTOOL64"; then
-  ac_ct_OTOOL64=$OTOOL64
-  # Extract the first word of "otool64", so it can be a program name with args.
-set dummy otool64; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_OTOOL64"; then
-  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_OTOOL64="otool64"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
-if test -n "$ac_ct_OTOOL64"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
-echo "${ECHO_T}$ac_ct_OTOOL64" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_OTOOL64" = x; then
-    OTOOL64=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    OTOOL64=$ac_ct_OTOOL64
-  fi
-else
-  OTOOL64="$ac_cv_prog_OTOOL64"
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-    { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
-echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; }
-if test "${lt_cv_apple_cc_single_mod+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
-	# By default we will add the -single_module flag. You can override
-	# by either setting the environment variable LT_MULTI_MODULE
-	# non-empty at configure time, or by adding -multi_module to the
-	# link flags.
-	rm -rf libconftest.dylib*
-	echo "int foo(void){return 1;}" > conftest.c
-	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&5
-	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
-        _lt_result=$?
-	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
-	  lt_cv_apple_cc_single_mod=yes
-	else
-	  cat conftest.err >&5
-	fi
-	rm -rf libconftest.dylib*
-	rm -f conftest.*
-      fi
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
-echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; }
-    { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
-echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; }
-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_ld_exported_symbols_list=no
-      save_LDFLAGS=$LDFLAGS
-      echo "_main" > conftest.sym
-      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  lt_cv_ld_exported_symbols_list=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	lt_cv_ld_exported_symbols_list=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-	LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
-echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; }
-    case $host_os in
-    rhapsody* | darwin1.[012])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-    darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*) # darwin 5.x on
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-	10.[012]*)
-	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-	10.*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-      esac
-    ;;
-  esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-      _lt_dar_single_mod='$single_module'
-    fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-    else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    fi
-    if test "$DSYMUTIL" != ":"; then
-      _lt_dsymutil='~$DSYMUTIL $lib || :'
-    else
-      _lt_dsymutil=
-    fi
-    ;;
-  esac
-
-
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_header_stdc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_header_stdc=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then
-  :
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
-		   (('a' <= (c) && (c) <= 'i') \
-		     || ('j' <= (c) && (c) <= 'r') \
-		     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-	|| toupper (i) != TOUPPER (i))
-      return 2;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-		  inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_Header=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-for ac_header in dlfcn.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_Header=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-# Set options
-
-
-
-        enable_dlopen=no
-
-
-  enable_win32_dll=no
-
-
-            # Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval=$enable_shared; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_shared=yes
-fi
-
-
-
-
-
-
-
-
-
-  # Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval=$enable_static; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_static=yes
-fi
-
-
-
-
-
-
-
-
-
-
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then
-  withval=$with_pic; pic_mode="$withval"
-else
-  pic_mode=default
-fi
-
-
-test -z "$pic_mode" && pic_mode=default
-
-
-
-
-
-
-
-  # Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval=$enable_fast_install; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_fast_install=yes
-fi
-
-
-
-
-
-
-
-
-
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-test -z "$LN_S" && LN_S="ln -s"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-if test -n "${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-
-{ echo "$as_me:$LINENO: checking for objdir" >&5
-echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
-if test "${lt_cv_objdir+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-echo "${ECHO_T}$lt_cv_objdir" >&6; }
-objdir=$lt_cv_objdir
-
-
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define LT_OBJDIR "$lt_cv_objdir/"
-_ACEOF
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
-
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $MAGIC_CMD in
-[\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    $EGREP "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-
-
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    { echo "$as_me:$LINENO: checking for file" >&5
-echo $ECHO_N "checking for file... $ECHO_C" >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $MAGIC_CMD in
-[\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    $EGREP "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-# Use C for the default configuration in the libtool script
-
-lt_save_CC="$CC"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-objext=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-
-
-
-
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-# Save the default compiler, since it gets overwritten when the other
-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
-compiler_DEFAULT=$CC
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
-
-
-if test -n "$compiler"; then
-
-lt_prog_compiler_no_builtin_flag=
-
-if test "$GCC" = yes; then
-  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
-
-  { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_rtti_exceptions=no
-   ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7385: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:7389: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_rtti_exceptions=yes
-     fi
-   fi
-   $RM conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
-else
-    :
-fi
-
-fi
-
-
-
-
-
-
-  lt_prog_compiler_wl=
-lt_prog_compiler_pic=
-lt_prog_compiler_static=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl='-Wl,'
-    lt_prog_compiler_static='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            lt_prog_compiler_pic='-fPIC'
-        ;;
-      m68k)
-            # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
-            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
-        ;;
-      esac
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      lt_prog_compiler_pic='-DDLL_EXPORT'
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic='-fno-common'
-      ;;
-
-    hpux*)
-      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-      # sets the default TLS model and affects inlining.
-      case $host_cpu in
-      hppa*64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic='-fPIC'
-	;;
-      esac
-      ;;
-
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared=no
-      enable_shared=no
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      lt_prog_compiler_pic='-fPIC -shared'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic=-Kconform_pic
-      fi
-      ;;
-
-    *)
-      lt_prog_compiler_pic='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static='-Bstatic'
-      else
-	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
-      ecc*)
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='-KPIC'
-	lt_prog_compiler_static='-static'
-        ;;
-      # icc used to be incompatible with GCC.
-      # ICC 10 doesn't accept -KPIC any more.
-      icc* | ifort*)
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='-fPIC'
-	lt_prog_compiler_static='-static'
-        ;;
-      # Lahey Fortran 8.1.
-      lf95*)
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='--shared'
-	lt_prog_compiler_static='--static'
-	;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='-fpic'
-	lt_prog_compiler_static='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static='-non_shared'
-        ;;
-      xl*)
-	# IBM XL C 8.0/Fortran 10.1 on PPC
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='-qpic'
-	lt_prog_compiler_static='-qstaticlink'
-	;;
-      *)
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C 5.9
-	  lt_prog_compiler_pic='-KPIC'
-	  lt_prog_compiler_static='-Bstatic'
-	  lt_prog_compiler_wl='-Wl,'
-	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic='-KPIC'
-	  lt_prog_compiler_static='-Bstatic'
-	  lt_prog_compiler_wl=''
-	  ;;
-	esac
-	;;
-      esac
-      ;;
-
-    newsos6)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      lt_prog_compiler_pic='-fPIC -shared'
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    rdos*)
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	lt_prog_compiler_wl='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl='-Qoption ld '
-      lt_prog_compiler_pic='-PIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic='-Kconform_pic'
-	lt_prog_compiler_static='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    unicos*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_can_build_shared=no
-      ;;
-
-    uts4*)
-      lt_prog_compiler_pic='-pic'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
-
-    *)
-      lt_prog_compiler_can_build_shared=no
-      ;;
-    esac
-  fi
-
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic=
-    ;;
-  *)
-    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-    ;;
-esac
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
-
-
-
-
-
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic"; then
-  { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_pic_works=no
-   ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7724: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:7728: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works=yes
-     fi
-   fi
-   $RM conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
-    case $lt_prog_compiler_pic in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
-     esac
-else
-    lt_prog_compiler_pic=
-     lt_prog_compiler_can_build_shared=no
-fi
-
-fi
-
-
-
-
-
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_static_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_static_works=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works=yes
-     fi
-   fi
-   $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
-    :
-else
-    lt_prog_compiler_static=
-fi
-
-
-
-
-
-
-
-  { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_c_o=no
-   $RM -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7829: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:7833: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $RM conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-   $RM out/* && rmdir out
-   cd ..
-   $RM -r conftest
-   $RM conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
-
-
-
-
-
-
-  { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_prog_compiler_c_o=no
-   $RM -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7884: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:7888: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $RM conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-   $RM out/* && rmdir out
-   cd ..
-   $RM -r conftest
-   $RM conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
-
-
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
-  hard_links=yes
-  $RM conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-
-
-
-
-
-  { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
-  runpath_var=
-  allow_undefined_flag=
-  always_export_symbols=no
-  archive_cmds=
-  archive_expsym_cmds=
-  compiler_needs_object=no
-  enable_shared_with_static_runtimes=no
-  export_dynamic_flag_spec=
-  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  hardcode_automatic=no
-  hardcode_direct=no
-  hardcode_direct_absolute=no
-  hardcode_libdir_flag_spec=
-  hardcode_libdir_flag_spec_ld=
-  hardcode_libdir_separator=
-  hardcode_minus_L=no
-  hardcode_shlibpath_var=unsupported
-  inherit_rpath=no
-  link_all_deplibs=unknown
-  module_cmds=
-  module_expsym_cmds=
-  old_archive_from_new_cmds=
-  old_archive_from_expsyms_cmds=
-  thread_safe_flag_spec=
-  whole_archive_flag_spec=
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-  extract_expsyms_cmds=
-
-  case $host_os in
-  cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  ld_shlibs=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      whole_archive_flag_spec=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>&1` in
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[3-9]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-_LT_EOF
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            archive_expsym_cmds=''
-        ;;
-      m68k)
-            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            hardcode_libdir_flag_spec='-L$libdir'
-            hardcode_minus_L=yes
-        ;;
-      esac
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec='-L$libdir'
-      allow_undefined_flag=unsupported
-      always_export_symbols=no
-      enable_shared_with_static_runtimes=yes
-      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
-
-    interix[3-9]*)
-      hardcode_direct=no
-      hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
-
-    gnu* | linux* | tpf* | k*bsd*-gnu)
-      tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
-	case $cc_basename in
-	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
-	esac
-      fi
-      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-	 && test "$tmp_diet" = no
-      then
-	tmp_addflag=
-	tmp_sharedflag='-shared'
-	case $cc_basename,$host_cpu in
-        pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	lf95*)				# Lahey Fortran 8.1
-	  whole_archive_flag_spec=
-	  tmp_sharedflag='--shared' ;;
-	xl[cC]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
-	  tmp_sharedflag='-qmkshrobj'
-	  tmp_addflag= ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-	  compiler_needs_object=yes
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	esac
-	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-        if test "x$supports_anon_versioning" = xyes; then
-          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	    echo "local: *; };" >> $output_objdir/$libname.ver~
-	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-        fi
-
-	case $cc_basename in
-	xlf*)
-	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
-	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
-	  hardcode_libdir_flag_spec=
-	  hardcode_libdir_flag_spec_ld='-rpath $libdir'
-	  archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
-	  if test "x$supports_anon_versioning" = xyes; then
-	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-	  fi
-	  ;;
-	esac
-      else
-        ld_shlibs=no
-      fi
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
-	ld_shlibs=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-	;;
-	*)
-	  # For security reasons, it is highly recommended that you always
-	  # use absolute paths for naming shared libraries, and exclude the
-	  # DT_RUNPATH tag from executables and libraries.  But doing so
-	  # requires that you compile everything twice, which is a pain.
-	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  else
-	    ld_shlibs=no
-	  fi
-	;;
-      esac
-      ;;
-
-    sunos4*)
-      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
-    esac
-
-    if test "$ld_shlibs" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec=
-      export_dynamic_flag_spec=
-      whole_archive_flag_spec=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag=unsupported
-      always_export_symbols=yes
-      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct=unsupported
-      fi
-      ;;
-
-    aix[4-9]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-	  for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-	    aix_use_runtimelinking=yes
-	    break
-	  fi
-	  done
-	  ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      archive_cmds=''
-      hardcode_direct=yes
-      hardcode_direct_absolute=yes
-      hardcode_libdir_separator=':'
-      link_all_deplibs=yes
-      file_list_spec='${wl}-f,'
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" &&
-	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-	  then
-	  # We have reworked collect2
-	  :
-	  else
-	  # We have old collect2
-	  hardcode_direct=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  hardcode_minus_L=yes
-	  hardcode_libdir_flag_spec='-L$libdir'
-	  hardcode_libdir_separator=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
-
-      export_dynamic_flag_spec='${wl}-bexpall'
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag='-berok'
-        # Determine the default libpath from the value encoded in an
-        # empty executable.
-        cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-      else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag="-z nodefs"
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an
-	 # empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag=' ${wl}-bernotok'
-	  allow_undefined_flag=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec='$convenience'
-	  archive_cmds_need_lc=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            archive_expsym_cmds=''
-        ;;
-      m68k)
-            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            hardcode_libdir_flag_spec='-L$libdir'
-            hardcode_minus_L=yes
-        ;;
-      esac
-      ;;
-
-    bsdi[45]*)
-      export_dynamic_flag_spec=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec=' '
-      allow_undefined_flag=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_from_new_cmds='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes=yes
-      ;;
-
-    darwin* | rhapsody*)
-
-
-  archive_cmds_need_lc=no
-  hardcode_direct=no
-  hardcode_automatic=yes
-  hardcode_shlibpath_var=unsupported
-  whole_archive_flag_spec=''
-  link_all_deplibs=yes
-  allow_undefined_flag="$_lt_dar_allow_undefined"
-  case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
-     *) _lt_dar_can_shared=$GCC ;;
-  esac
-  if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=echo
-    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-
-  else
-  ld_shlibs=no
-  fi
-
-      ;;
-
-    dgux*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_shlibpath_var=no
-      ;;
-
-    freebsd1*)
-      ld_shlibs=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_direct=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L=yes
-      export_dynamic_flag_spec='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	hardcode_libdir_flag_spec_ld='+b $libdir'
-	hardcode_libdir_separator=:
-	hardcode_direct=yes
-	hardcode_direct_absolute=yes
-	export_dynamic_flag_spec='${wl}-E'
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_direct=no
-	  hardcode_shlibpath_var=no
-	  ;;
-	*)
-	  hardcode_direct=yes
-	  hardcode_direct_absolute=yes
-	  export_dynamic_flag_spec='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	# Try to use the -exported_symbol ld option, if it does not
-	# work, assume that -exports_file does not work either and
-	# implicitly export all symbols.
-        save_LDFLAGS="$LDFLAGS"
-        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-        cat >conftest.$ac_ext <<_ACEOF
-int foo(void) {}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-        LDFLAGS="$save_LDFLAGS"
-      else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-      fi
-      archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      inherit_rpath=yes
-      link_all_deplibs=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    newsos6)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_shlibpath_var=no
-      ;;
-
-    *nto* | *qnx*)
-      ;;
-
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	hardcode_direct=yes
-	hardcode_shlibpath_var=no
-	hardcode_direct_absolute=yes
-	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-	fi
-      else
-	ld_shlibs=no
-      fi
-      ;;
-
-    os2*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      allow_undefined_flag=unsupported
-      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec='-rpath $libdir'
-      fi
-      archive_cmds_need_lc='no'
-      hardcode_libdir_separator=:
-      ;;
-
-    solaris*)
-      no_undefined_flag=' -z defs'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-      else
-	case `$CC -V 2>&1` in
-	*"Compilers 5.0"*)
-	  wlarc=''
-	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
-	  ;;
-	*)
-	  wlarc='${wl}'
-	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-	  ;;
-	esac
-      fi
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_shlibpath_var=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
-	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
-	fi
-	;;
-      esac
-      link_all_deplibs=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      hardcode_shlibpath_var=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds='$CC -r -o $output$reload_objs'
-	  hardcode_direct=no
-        ;;
-	motorola)
-	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var=no
-      ;;
-
-    sysv4.3*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      export_dynamic_flag_spec='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag='${wl}-z,text'
-      archive_cmds_need_lc=no
-      hardcode_shlibpath_var=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag='${wl}-z,text'
-      allow_undefined_flag='${wl}-z,nodefs'
-      archive_cmds_need_lc=no
-      hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-R,$libdir'
-      hardcode_libdir_separator=':'
-      link_all_deplibs=yes
-      export_dynamic_flag_spec='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_shlibpath_var=no
-      ;;
-
-    *)
-      ld_shlibs=no
-      ;;
-    esac
-
-    if test x$host_vendor = xsni; then
-      case $host in
-      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-	export_dynamic_flag_spec='${wl}-Blargedynsym'
-	;;
-      esac
-    fi
-  fi
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-echo "${ECHO_T}$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
-
-with_gnu_ld=$with_gnu_ld
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
-      $RM conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl
-	pic_flag=$lt_prog_compiler_pic
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag
-        allow_undefined_flag=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc=no
-        else
-	  archive_cmds_need_lc=yes
-        fi
-        allow_undefined_flag=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $RM conftest*
-      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-  { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-
-if test "$GCC" = yes; then
-  case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-  # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
-  lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-  for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
-      test -d "$lt_sys_path" && \
-	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-    fi
-  done
-  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
-  for (lt_i = NF; lt_i > 0; lt_i--) {
-    if ($lt_i != "" && $lt_i != ".") {
-      if ($lt_i == "..") {
-        lt_count++;
-      } else {
-        if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
-        } else {
-          lt_count--;
-        }
-      }
-    }
-  }
-  if (lt_foo != "") { lt_freq[lt_foo]++; }
-  if (lt_freq[lt_foo] == 1) { print lt_foo; }
-}'`
-  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[4-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  case $host_cpu in
-  powerpc)
-    # Since July 2007 AmigaOS4 officially supports .so libraries.
-    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    ;;
-  m68k)
-    library_names_spec='$libname.ixlibrary $libname.a'
-    # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-    ;;
-  esac
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32* | cegcc*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname~
-      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
-        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
-      fi'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw* | cegcc*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  hppa*64*)
-    shrext_cmds='.sl'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix[3-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # Some binutils ld are patched to set DT_RUNPATH
-  save_LDFLAGS=$LDFLAGS
-  save_libdir=$libdir
-  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
-       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
-  shlibpath_overrides_runpath=yes
-fi
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  LDFLAGS=$save_LDFLAGS
-  libdir=$save_libdir
-
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-*nto* | *qnx*)
-  version_type=qnx
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='ldqnx.so'
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-tpf*)
-  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-  { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" ||
-   test -n "$runpath_var" ||
-   test "X$hardcode_automatic" = "Xyes" ; then
-
-  # We can hardcode non-existent directories.
-  if test "$hardcode_direct" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
-     test "$hardcode_minus_L" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
-echo "${ECHO_T}$hardcode_action" >&6; }
-
-if test "$hardcode_action" = relink ||
-   test "$inherit_rpath" = yes; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-
-
-
-
-
-  if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-    ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-    ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_dl_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-
-fi
-
-    ;;
-
-  *)
-    { echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
-if test "${ac_cv_func_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define shl_load innocuous_shl_load
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef shl_load
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_shl_load || defined __stub___shl_load
-choke me
-#endif
-
-int
-main ()
-{
-return shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_shl_load=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
-if test $ac_cv_func_shl_load = yes; then
-  lt_cv_dlopen="shl_load"
-else
-  { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-int
-main ()
-{
-return shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_dld_shl_load=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
-if test $ac_cv_lib_dld_shl_load = yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-else
-  { echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
-if test "${ac_cv_func_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define dlopen innocuous_dlopen
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef dlopen
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_dlopen || defined __stub___dlopen
-choke me
-#endif
-
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
-if test $ac_cv_func_dlopen = yes; then
-  lt_cv_dlopen="dlopen"
-else
-  { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_dl_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_svld_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_svld_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
-if test $ac_cv_lib_svld_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
-  { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link ();
-int
-main ()
-{
-return dld_link ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_dld_link=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_dld_dld_link=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
-if test $ac_cv_lib_dld_dld_link = yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<_LT_EOF
-#line 10816 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-  return status;
-}
-_LT_EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&5 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self_static=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<_LT_EOF
-#line 10912 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-  return status;
-}
-_LT_EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&5 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self_static=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-striplib=
-old_striplib=
-{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-  darwin*)
-    if test -n "$STRIP" ; then
-      striplib="$STRIP -x"
-      old_striplib="$STRIP -S"
-      { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-    else
-      { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-    fi
-    ;;
-  *)
-    { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-    ;;
-  esac
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-  # Report which library types will actually be built
-  { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-  { echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6; }
-
-  { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-  test "$can_build_shared" = "no" && enable_shared=no
-
-  # On AIX, shared libraries and static libraries use the same namespace, and
-  # are all built from PIC.
-  case $host_os in
-  aix3*)
-    test "$enable_shared" = yes && enable_static=no
-    if test -n "$RANLIB"; then
-      archive_cmds="$archive_cmds~\$RANLIB \$lib"
-      postinstall_cmds='$RANLIB $lib'
-    fi
-    ;;
-
-  aix[4-9]*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
-    fi
-    ;;
-  esac
-  { echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6; }
-
-  { echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-  # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
-  { echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6; }
-
-
-
-
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-
-
-
-
-
-
-
-
-
-
-
-
-        ac_config_commands="$ac_config_commands libtool"
-
-
-
-
-# Only expand once:
-
-
-
-
-
-{ echo "$as_me:$LINENO: checking for library containing crypt" >&5
-echo $ECHO_N "checking for library containing crypt... $ECHO_C" >&6; }
-if test "${ac_cv_search_crypt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char crypt ();
-int
-main ()
-{
-return crypt ();
-  ;
-  return 0;
-}
-_ACEOF
-for ac_lib in '' crypt; do
-  if test -z "$ac_lib"; then
-    ac_res="none required"
-  else
-    ac_res=-l$ac_lib
-    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-  fi
-  rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_crypt=$ac_res
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext
-  if test "${ac_cv_search_crypt+set}" = set; then
-  break
-fi
-done
-if test "${ac_cv_search_crypt+set}" = set; then
-  :
-else
-  ac_cv_search_crypt=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_crypt" >&5
-echo "${ECHO_T}$ac_cv_search_crypt" >&6; }
-ac_res=$ac_cv_search_crypt
-if test "$ac_res" != no; then
-  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for connect in -lsocket" >&5
-echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6; }
-if test "${ac_cv_lib_socket_connect+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsocket  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char connect ();
-int
-main ()
-{
-return connect ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_socket_connect=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_socket_connect=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5
-echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6; }
-if test $ac_cv_lib_socket_connect = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBSOCKET 1
-_ACEOF
-
-  LIBS="-lsocket $LIBS"
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for getservbyname in -lbind" >&5
-echo $ECHO_N "checking for getservbyname in -lbind... $ECHO_C" >&6; }
-if test "${ac_cv_lib_bind_getservbyname+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lbind  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char getservbyname ();
-int
-main ()
-{
-return getservbyname ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_bind_getservbyname=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_bind_getservbyname=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_bind_getservbyname" >&5
-echo "${ECHO_T}$ac_cv_lib_bind_getservbyname" >&6; }
-if test $ac_cv_lib_bind_getservbyname = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBBIND 1
-_ACEOF
-
-  LIBS="-lbind $LIBS"
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5
-echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; }
-if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lnsl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char gethostbyname ();
-int
-main ()
-{
-return gethostbyname ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_nsl_gethostbyname=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_nsl_gethostbyname=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5
-echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; }
-if test $ac_cv_lib_nsl_gethostbyname = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBNSL 1
-_ACEOF
-
-  LIBS="-lnsl $LIBS"
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for openpty in -lutil" >&5
-echo $ECHO_N "checking for openpty in -lutil... $ECHO_C" >&6; }
-if test "${ac_cv_lib_util_openpty+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lutil  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char openpty ();
-int
-main ()
-{
-return openpty ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_util_openpty=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_util_openpty=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_util_openpty" >&5
-echo "${ECHO_T}$ac_cv_lib_util_openpty" >&6; }
-if test $ac_cv_lib_util_openpty = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBUTIL 1
-_ACEOF
-
-  LIBS="-lutil $LIBS"
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for X" >&5
-echo $ECHO_N "checking for X... $ECHO_C" >&6; }
-
-
-# Check whether --with-x was given.
-if test "${with_x+set}" = set; then
-  withval=$with_x;
-fi
-
-# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
-if test "x$with_x" = xno; then
-  # The user explicitly disabled X.
-  have_x=disabled
-else
-  case $x_includes,$x_libraries in #(
-    *\'*) { { echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5
-echo "$as_me: error: Cannot use X directory names containing '" >&2;}
-   { (exit 1); exit 1; }; };; #(
-    *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # One or both of the vars are not set, and there is no cached value.
-ac_x_includes=no ac_x_libraries=no
-rm -f -r conftest.dir
-if mkdir conftest.dir; then
-  cd conftest.dir
-  cat >Imakefile <<'_ACEOF'
-incroot:
-	@echo incroot='${INCROOT}'
-usrlibdir:
-	@echo usrlibdir='${USRLIBDIR}'
-libdir:
-	@echo libdir='${LIBDIR}'
-_ACEOF
-  if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then
-    # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-    for ac_var in incroot usrlibdir libdir; do
-      eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`"
-    done
-    # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
-    for ac_extension in a so sl; do
-      if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" &&
-	 test -f "$ac_im_libdir/libX11.$ac_extension"; then
-	ac_im_usrlibdir=$ac_im_libdir; break
-      fi
-    done
-    # Screen out bogus values from the imake configuration.  They are
-    # bogus both because they are the default anyway, and because
-    # using them would break gcc on systems where it needs fixed includes.
-    case $ac_im_incroot in
-	/usr/include) ac_x_includes= ;;
-	*) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
-    esac
-    case $ac_im_usrlibdir in
-	/usr/lib | /lib) ;;
-	*) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;;
-    esac
-  fi
-  cd ..
-  rm -f -r conftest.dir
-fi
-
-# Standard set of common directories for X headers.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-ac_x_header_dirs='
-/usr/X11/include
-/usr/X11R6/include
-/usr/X11R5/include
-/usr/X11R4/include
-
-/usr/include/X11
-/usr/include/X11R6
-/usr/include/X11R5
-/usr/include/X11R4
-
-/usr/local/X11/include
-/usr/local/X11R6/include
-/usr/local/X11R5/include
-/usr/local/X11R4/include
-
-/usr/local/include/X11
-/usr/local/include/X11R6
-/usr/local/include/X11R5
-/usr/local/include/X11R4
-
-/usr/X386/include
-/usr/x386/include
-/usr/XFree86/include/X11
-
-/usr/include
-/usr/local/include
-/usr/unsupported/include
-/usr/athena/include
-/usr/local/x11r5/include
-/usr/lpp/Xamples/include
-
-/usr/openwin/include
-/usr/openwin/share/include'
-
-if test "$ac_x_includes" = no; then
-  # Guess where to find include files, by looking for Xlib.h.
-  # First, try using that file with no special directory specified.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <X11/Xlib.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # We can compile using X headers with no special include directory.
-ac_x_includes=
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  for ac_dir in $ac_x_header_dirs; do
-  if test -r "$ac_dir/X11/Xlib.h"; then
-    ac_x_includes=$ac_dir
-    break
-  fi
-done
-fi
-
-rm -f conftest.err conftest.$ac_ext
-fi # $ac_x_includes = no
-
-if test "$ac_x_libraries" = no; then
-  # Check for the libraries.
-  # See if we find them without any special options.
-  # Don't add to $LIBS permanently.
-  ac_save_LIBS=$LIBS
-  LIBS="-lXt $LIBS"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <X11/Xlib.h>
-int
-main ()
-{
-XrmInitialize ()
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  LIBS=$ac_save_LIBS
-# We can link X programs with no special library path.
-ac_x_libraries=
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	LIBS=$ac_save_LIBS
-for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
-do
-  # Don't even attempt the hair of trying to link an X program!
-  for ac_extension in a so sl; do
-    if test -r "$ac_dir/libXt.$ac_extension"; then
-      ac_x_libraries=$ac_dir
-      break 2
-    fi
-  done
-done
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi # $ac_x_libraries = no
-
-case $ac_x_includes,$ac_x_libraries in #(
-  no,* | *,no | *\'*)
-    # Didn't find X, or a directory has "'" in its name.
-    ac_cv_have_x="have_x=no";; #(
-  *)
-    # Record where we found X for the cache.
-    ac_cv_have_x="have_x=yes\
-	ac_x_includes='$ac_x_includes'\
-	ac_x_libraries='$ac_x_libraries'"
-esac
-fi
-;; #(
-    *) have_x=yes;;
-  esac
-  eval "$ac_cv_have_x"
-fi # $with_x != no
-
-if test "$have_x" != yes; then
-  { echo "$as_me:$LINENO: result: $have_x" >&5
-echo "${ECHO_T}$have_x" >&6; }
-  no_x=yes
-else
-  # If each of the values was on the command line, it overrides each guess.
-  test "x$x_includes" = xNONE && x_includes=$ac_x_includes
-  test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
-  # Update the cache value to reflect the command line values.
-  ac_cv_have_x="have_x=yes\
-	ac_x_includes='$x_includes'\
-	ac_x_libraries='$x_libraries'"
-  { echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5
-echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6; }
-fi
-
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_header_stdc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_header_stdc=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then
-  :
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
-		   (('a' <= (c) && (c) <= 'i') \
-		     || ('j' <= (c) && (c) <= 'r') \
-		     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-	|| toupper (i) != TOUPPER (i))
-      return 2;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5
-echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6; }
-if test "${ac_cv_header_sys_wait_h+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sys/types.h>
-#include <sys/wait.h>
-#ifndef WEXITSTATUS
-# define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8)
-#endif
-#ifndef WIFEXITED
-# define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
-#endif
-
-int
-main ()
-{
-  int s;
-  wait (&s);
-  s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_header_sys_wait_h=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_header_sys_wait_h=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5
-echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6; }
-if test $ac_cv_header_sys_wait_h = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_SYS_WAIT_H 1
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
-echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6; }
-if test "${ac_cv_header_time+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
-
-int
-main ()
-{
-if ((struct tm *) 0)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_header_time=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_header_time=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
-echo "${ECHO_T}$ac_cv_header_time" >&6; }
-if test $ac_cv_header_time = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define TIME_WITH_SYS_TIME 1
-_ACEOF
-
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-for ac_header in fcntl.h syslog.h unistd.h utmp.h utmpx.h \
-	sys/file.h sys/ioctl.h sys/time.h sys/types.h sys/param.h \
-	malloc.h strings.h memory.h \
-	curses.h ncurses.h sgtty.h term.h termio.h termios.h \
-	termcap.h sys/termio.h libutil.h\
-
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-
-    ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-olibs="$LIBS"
-CNVFILE_SUBDIR=bsd
-{ echo "$as_me:$LINENO: checking --with-term-libs argument" >&5
-echo $ECHO_N "checking --with-term-libs argument... $ECHO_C" >&6; }
-
-# Check whether --with-tlib was given.
-if test "${with_tlib+set}" = set; then
-  withval=$with_tlib;
-fi
-
-if test -n "$with_term_libs"; then
-  { echo "$as_me:$LINENO: result: $with_term_libs" >&5
-echo "${ECHO_T}$with_term_libs" >&6; }
-  TERMLIB=$with_term_libs
-else
-  { echo "$as_me:$LINENO: result: automatic terminal library selection" >&5
-echo "${ECHO_T}automatic terminal library selection" >&6; }
-            case "`uname -s 2>/dev/null`" in
-	OSF1)	tlibs="ncurses curses termlib termcap";;
-	*)	tlibs="ncurses termlib termcap curses";;
-  esac
- for libname in $tlibs; do
-    as_ac_Lib=`echo "ac_cv_lib_${libname}''_tgetent" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for tgetent in -l${libname}" >&5
-echo $ECHO_N "checking for tgetent in -l${libname}... $ECHO_C" >&6; }
-if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-l${libname}  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char tgetent ();
-int
-main ()
-{
-return tgetent ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_Lib=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_Lib=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-ac_res=`eval echo '${'$as_ac_Lib'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Lib'}'` = yes; then
-
-                        LIBS="${LIBS} -l${libname}"
-      if test "$cross_compiling" = yes; then
-  res="FAIL"
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#ifdef HAVE_TERMCAP_H
-# include <termcap.h>
-#endif
-main() {char *s; s=(char *)tgoto("%p1%d", 0, 1); exit(0); }
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  res="OK"
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-res="FAIL"
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-      if test "$res" = "OK"; then
-	TERMLIB="${TERMLIB} -l${libname}"
-					break
-      fi
-      { echo "$as_me:$LINENO: result: $libname library is not usable" >&5
-echo "${ECHO_T}$libname library is not usable" >&6; }
-
-fi
-
-    LIBS=${olibs}
-  done
-fi
-if test "x$TERMLIB" != "x"; then
-  LIBS="${LIBS} ${TERMLIB}"
-  { echo "$as_me:$LINENO: checking whether we talk terminfo" >&5
-echo $ECHO_N "checking whether we talk terminfo... $ECHO_C" >&6; }
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: failed to compile test program." >&5
-echo "$as_me: error: failed to compile test program." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#ifdef HAVE_TERMCAP_H
-# include <termcap.h>
-#endif
-main()
-{char *s; s=(char *)tgoto("%p1%d", 0, 1); exit(!strcmp(s==0 ? "" : s, "1")); }
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   { echo "$as_me:$LINENO: result: no -- we are in termcap land" >&5
-echo "${ECHO_T}no -- we are in termcap land" >&6; }
-	  CNVFILE_SUBDIR=bsd
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_TERMINFO 1
-_ACEOF
-
-	  { echo "$as_me:$LINENO: result: yes -- terminfo spoken here" >&5
-echo "${ECHO_T}yes -- terminfo spoken here" >&6; }
-	  CNVFILE_SUBDIR=sysV
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-else
-  { echo "$as_me:$LINENO: result: none found" >&5
-echo "${ECHO_T}none found" >&6; }
-fi
-LIBS=${olibs}
-
-
-
-if test $client = true; then
-  if test $client_utmp = auto; then
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#if HAVE_SYS_PARAM_H
-# include <sys/param.h>
-#endif
-#if defined(BSD) && (BSD >= 199306)
-   yes
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "yes" >/dev/null 2>&1; then
-  client_utmp=false
-else
-  client_utmp=true
-fi
-rm -f conftest*
-
-  fi
-
-    { echo "$as_me:$LINENO: checking whether we're using utmp with uum" >&5
-echo $ECHO_N "checking whether we're using utmp with uum... $ECHO_C" >&6; }
-  if test $client_utmp = true; then
-
-cat >>confdefs.h <<\_ACEOF
-#define USE_UTMP 1
-_ACEOF
-
-    { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-  else
-    { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-  fi
-fi
-
-{ echo "$as_me:$LINENO: checking for mode_t" >&5
-echo $ECHO_N "checking for mode_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_mode_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-typedef mode_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
-  return 0;
-if (sizeof (ac__type_new_))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_mode_t=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_type_mode_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_mode_t" >&5
-echo "${ECHO_T}$ac_cv_type_mode_t" >&6; }
-if test $ac_cv_type_mode_t = yes; then
-  :
-else
-
-cat >>confdefs.h <<_ACEOF
-#define mode_t int
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
-echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6; }
-if test "${ac_cv_header_time+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
-
-int
-main ()
-{
-if ((struct tm *) 0)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_header_time=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_header_time=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
-echo "${ECHO_T}$ac_cv_header_time" >&6; }
-if test $ac_cv_header_time = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define TIME_WITH_SYS_TIME 1
-_ACEOF
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for socklen_t" >&5
-echo $ECHO_N "checking for socklen_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_socklen_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#include <sys/socket.h>
-
-typedef socklen_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
-  return 0;
-if (sizeof (ac__type_new_))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_socklen_t=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_type_socklen_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_socklen_t" >&5
-echo "${ECHO_T}$ac_cv_type_socklen_t" >&6; }
-if test $ac_cv_type_socklen_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_SOCKLEN_T 1
-_ACEOF
-
-
-else
-
-cat >>confdefs.h <<\_ACEOF
-#define socklen_t int
-_ACEOF
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for struct utmp.ut_user" >&5
-echo $ECHO_N "checking for struct utmp.ut_user... $ECHO_C" >&6; }
-if test "${ac_cv_member_struct_utmp_ut_user+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#if HAVE_UTMPX_H
-#  include <utmpx.h>
-#endif
-#if HAVE_UTMP_H
-#  include <utmp.h>
-#endif
-
-int
-main ()
-{
-static struct utmp ac_aggr;
-if (ac_aggr.ut_user)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_utmp_ut_user=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#if HAVE_UTMPX_H
-#  include <utmpx.h>
-#endif
-#if HAVE_UTMP_H
-#  include <utmp.h>
-#endif
-
-int
-main ()
-{
-static struct utmp ac_aggr;
-if (sizeof ac_aggr.ut_user)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_utmp_ut_user=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_member_struct_utmp_ut_user=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_member_struct_utmp_ut_user" >&5
-echo "${ECHO_T}$ac_cv_member_struct_utmp_ut_user" >&6; }
-if test $ac_cv_member_struct_utmp_ut_user = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_STRUCT_UTMP_UT_USER 1
-_ACEOF
-
-
-fi
-{ echo "$as_me:$LINENO: checking for struct utmp.ut_name" >&5
-echo $ECHO_N "checking for struct utmp.ut_name... $ECHO_C" >&6; }
-if test "${ac_cv_member_struct_utmp_ut_name+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#if HAVE_UTMPX_H
-#  include <utmpx.h>
-#endif
-#if HAVE_UTMP_H
-#  include <utmp.h>
-#endif
-
-int
-main ()
-{
-static struct utmp ac_aggr;
-if (ac_aggr.ut_name)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_utmp_ut_name=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#if HAVE_UTMPX_H
-#  include <utmpx.h>
-#endif
-#if HAVE_UTMP_H
-#  include <utmp.h>
-#endif
-
-int
-main ()
-{
-static struct utmp ac_aggr;
-if (sizeof ac_aggr.ut_name)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_utmp_ut_name=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_member_struct_utmp_ut_name=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_member_struct_utmp_ut_name" >&5
-echo "${ECHO_T}$ac_cv_member_struct_utmp_ut_name" >&6; }
-if test $ac_cv_member_struct_utmp_ut_name = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_STRUCT_UTMP_UT_NAME 1
-_ACEOF
-
-
-fi
-{ echo "$as_me:$LINENO: checking for struct utmp.ut_id" >&5
-echo $ECHO_N "checking for struct utmp.ut_id... $ECHO_C" >&6; }
-if test "${ac_cv_member_struct_utmp_ut_id+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#if HAVE_UTMPX_H
-#  include <utmpx.h>
-#endif
-#if HAVE_UTMP_H
-#  include <utmp.h>
-#endif
-
-int
-main ()
-{
-static struct utmp ac_aggr;
-if (ac_aggr.ut_id)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_utmp_ut_id=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#if HAVE_UTMPX_H
-#  include <utmpx.h>
-#endif
-#if HAVE_UTMP_H
-#  include <utmp.h>
-#endif
-
-int
-main ()
-{
-static struct utmp ac_aggr;
-if (sizeof ac_aggr.ut_id)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_utmp_ut_id=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_member_struct_utmp_ut_id=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_member_struct_utmp_ut_id" >&5
-echo "${ECHO_T}$ac_cv_member_struct_utmp_ut_id" >&6; }
-if test $ac_cv_member_struct_utmp_ut_id = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_STRUCT_UTMP_UT_ID 1
-_ACEOF
-
-
-fi
-
-
-
-if test $ac_cv_c_compiler_gnu = yes; then
-    { echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5
-echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6; }
-if test "${ac_cv_prog_gcc_traditional+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-    ac_pattern="Autoconf.*'x'"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sgtty.h>
-Autoconf TIOCGETP
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "$ac_pattern" >/dev/null 2>&1; then
-  ac_cv_prog_gcc_traditional=yes
-else
-  ac_cv_prog_gcc_traditional=no
-fi
-rm -f conftest*
-
-
-  if test $ac_cv_prog_gcc_traditional = no; then
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <termio.h>
-Autoconf TCGETA
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "$ac_pattern" >/dev/null 2>&1; then
-  ac_cv_prog_gcc_traditional=yes
-fi
-rm -f conftest*
-
-  fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5
-echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6; }
-  if test $ac_cv_prog_gcc_traditional = yes; then
-    CC="$CC -traditional"
-  fi
-fi
-
-
-{ echo "$as_me:$LINENO: checking return type of signal handlers" >&5
-echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6; }
-if test "${ac_cv_type_signal+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sys/types.h>
-#include <signal.h>
-
-int
-main ()
-{
-return *(signal (0, 0)) (0) == 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_signal=int
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_type_signal=void
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5
-echo "${ECHO_T}$ac_cv_type_signal" >&6; }
-
-cat >>confdefs.h <<_ACEOF
-#define RETSIGTYPE $ac_cv_type_signal
-_ACEOF
-
-
-if test "$ac_cv_type_signal" = void; then
-
-cat >>confdefs.h <<\_ACEOF
-#define RETSIGTYPE_VOID 1
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for working memcmp" >&5
-echo $ECHO_N "checking for working memcmp... $ECHO_C" >&6; }
-if test "${ac_cv_func_memcmp_working+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$cross_compiling" = yes; then
-  ac_cv_func_memcmp_working=no
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-
-  /* Some versions of memcmp are not 8-bit clean.  */
-  char c0 = '\100', c1 = '\200', c2 = '\201';
-  if (memcmp(&c0, &c2, 1) >= 0 || memcmp(&c1, &c2, 1) >= 0)
-    return 1;
-
-  /* The Next x86 OpenStep bug shows up only when comparing 16 bytes
-     or more and with at least one buffer not starting on a 4-byte boundary.
-     William Lewis provided this test program.   */
-  {
-    char foo[21];
-    char bar[21];
-    int i;
-    for (i = 0; i < 4; i++)
-      {
-	char *a = foo + i;
-	char *b = bar + i;
-	strcpy (a, "--------01111111");
-	strcpy (b, "--------10000000");
-	if (memcmp (a, b, 16) >= 0)
-	  return 1;
-      }
-    return 0;
-  }
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_memcmp_working=yes
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_memcmp_working=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_memcmp_working" >&5
-echo "${ECHO_T}$ac_cv_func_memcmp_working" >&6; }
-test $ac_cv_func_memcmp_working = no && case " $LIBOBJS " in
-  *" memcmp.$ac_objext "* ) ;;
-  *) LIBOBJS="$LIBOBJS memcmp.$ac_objext"
- ;;
-esac
-
-
-
-
-
-
-for ac_func in getpgid getpgrp setpgrp wait3
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-{ echo "$as_me:$LINENO: checking whether getpgrp requires zero arguments" >&5
-echo $ECHO_N "checking whether getpgrp requires zero arguments... $ECHO_C" >&6; }
-if test "${ac_cv_func_getpgrp_void+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # Use it with a single arg.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-getpgrp (0);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_getpgrp_void=no
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_getpgrp_void=yes
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_getpgrp_void" >&5
-echo "${ECHO_T}$ac_cv_func_getpgrp_void" >&6; }
-if test $ac_cv_func_getpgrp_void = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define GETPGRP_VOID 1
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking whether setpgrp takes no argument" >&5
-echo $ECHO_N "checking whether setpgrp takes no argument... $ECHO_C" >&6; }
-if test "${ac_cv_func_setpgrp_void+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot check setpgrp when cross compiling" >&5
-echo "$as_me: error: cannot check setpgrp when cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-/* If this system has a BSD-style setpgrp which takes arguments,
-  setpgrp(1, 1) will fail with ESRCH and return -1, in that case
-  exit successfully. */
-  return setpgrp (1,1) != -1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_setpgrp_void=no
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_setpgrp_void=yes
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_setpgrp_void" >&5
-echo "${ECHO_T}$ac_cv_func_setpgrp_void" >&6; }
-if test $ac_cv_func_setpgrp_void = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define SETPGRP_VOID 1
-_ACEOF
-
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-for ac_func in random drand48 fchmod getopt killpg \
-	FD_SET \
-	gethostname select socket closesocket setsockopt send recv \
-	getdtablesize getrlimit syslog vsyslog setenv snprintf \
-	ptsname posix_openpt openpty pututxline pututline setsid
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-
-
-
-
-
-
-
-for ac_func in bcopy bzero bcmp index rindex \
-	memcpy memmove memset strchr strrchr
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-JS_SUPPORTOBJS=
-
-
-for ac_func in mkdir vasprintf
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-else
-  JS_SUPPORTOBJS="${JS_SUPPORTOBJS} ${ac_func}.o"
-fi
-done
-
-
-
-
-{ echo "$as_me:$LINENO: checking for /dev/ptmx" >&5
-echo $ECHO_N "checking for /dev/ptmx... $ECHO_C" >&6; }
-if test "${ac_cv_file__dev_ptmx+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  test "$cross_compiling" = yes &&
-  { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
-echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-if test -r "/dev/ptmx"; then
-  ac_cv_file__dev_ptmx=yes
-else
-  ac_cv_file__dev_ptmx=no
-fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_file__dev_ptmx" >&5
-echo "${ECHO_T}$ac_cv_file__dev_ptmx" >&6; }
-if test $ac_cv_file__dev_ptmx = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE__DEV_PTMX 1
-_ACEOF
-
-
-fi
-
-
-
-
-WRAPLIB=
-{ echo "$as_me:$LINENO: checking whether to use libwrap" >&5
-echo $ECHO_N "checking whether to use libwrap... $ECHO_C" >&6; }
-
-# Check whether --with-libwrap was given.
-if test "${with_libwrap+set}" = set; then
-  withval=$with_libwrap;  case "$withval" in
-	  no)
-	    { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-	    WRAP_TRY=no
-	    ;;
-	  yes)
-	    { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-	    WRAP_TRY=yes
-	    ;;
-	  *)
-	    { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-	    WRAP_TRY=yes
-	    if test -d "$withval"; then
-	      WRAPINCLUDES="-I$withval"
-	      if test -d $withval/include; then
-		WRAPINCLUDES="-I$withval/include $WRAPINCLUDES"
-	      fi
-	      WRAPLIB="-L$withval -lwrap"
-	      if test -d $withval/lib; then
-		WRAPLIB="-L$withval/lib $WRAPLIB"
-	      fi
-	    else
-	      WRAPINCLUDES="$withval"
-	    fi
-	    ;;
-	esac
-else
-  { echo "$as_me:$LINENO: result: try to find" >&5
-echo "${ECHO_T}try to find" >&6; }
-	 WRAP_TRY=auto
-
-fi
-
-# Link test for libwrap
-if test "$WRAP_TRY" = yes -o "$WRAP_TRY" = auto; then
-    OLDCFLAGS="$CFLAGS"
-    CFLAGS="$WRAPINCLUDES $CFLAGS"
-    OLDLIBS="$LIBS"
-    WRAPLIB=${WRAPLIB:-"-lwrap"}
-    LIBS="$WRAPLIB $OLDLIBS"
-    { echo "$as_me:$LINENO: checking libwrap is working" >&5
-echo $ECHO_N "checking libwrap is working... $ECHO_C" >&6; }
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
- int allow_severity; int deny_severity;
-int
-main ()
-{
- hosts_access();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_LIBWRAP 1
-_ACEOF
-
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	 { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-		  if test "$WRAP_TRY" = yes; then
-		    { { echo "$as_me:$LINENO: error: Could not find libwrap. Please check config.log." >&5
-echo "$as_me: error: Could not find libwrap. Please check config.log." >&2;}
-   { (exit 1); exit 1; }; }
-		  else
-		    # recover old flag / clear needless WRAPLIB and continue
-		    CFLAGS=$OLDCFLAGS
-		    WRAPLIB=
-		  fi
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-    # only jserver needs libwrap, recover LIBS also
-    LIBS=$OLDLIBS
-fi
-
-
-# mkdir -p Contrib/dic/gerodic in case builddir != srcdir
-for dir in Contrib/dic/gerodic Contrib/dic/supplement Contrib/dic/ldic Contrib/dic/2ch
-do
-  if test ! -d $dir; then
-    echo "creating $dir ..."
-    $ac_install_sh -d $dir
-  fi
-done
-
-
-
-makefiles_generic="makerule.mk Makefile"
-
-
-if test "x${Wnn}" = "xWnn"; then
-  makefiles_wnn="Wnn/Makefile Wnn/conv/Makefile Wnn/include/Makefile \
-	Wnn/jd/Makefile Wnn/jd/rk/Makefile Wnn/jd/rk.vi/Makefile \
-	Wnn/jlib/Makefile Wnn/jlib.V3/Makefile Wnn/jserver/Makefile \
-	Wnn/jutil/Makefile Wnn/ld/Makefile Wnn/ld/rk/Makefile \
-	Wnn/romkan/Makefile Wnn/uum/Makefile \
-	Wnn/man/Makefile Wnn/man/2.env/Makefile Wnn/man/3.libwnn/Makefile \
-	Wnn/man/4.cmd/Makefile Wnn/man/6.jutil/Makefile \
-	Wnn/man/2.env/dic/Makefile Wnn/man/2.env/wnn/Makefile \
-	Wnn/man/3.libwnn/jl_lib/Makefile Wnn/man/3.libwnn/js_lib/Makefile \
-	Wnn/man/3.libwnn/misc_lib/Makefile Wnn/man/3.libwnn/rk_lib/Makefile"
-  makefiles_wnn_dic="Contrib/dic/gerodic/Makefile Contrib/dic/2ch/Makefile \
-	Contrib/dic/supplement/Makefile Contrib/dic/ldic/Makefile\
-	Wnn/pubdicplus/Makefile \
-	Wnn/wnncons/Makefile Wnn/wnncons/dic/Makefile"
-fi
-
-
-if test "x$cWnn" = "xcWnn"; then
-  makefiles_cwnn="cWnn/Makefile cWnn/conv/Makefile cWnn/etc/Makefile \
-	cWnn/cd/Makefile cWnn/cd/rk/Makefile \
-	cWnn/cd/rk_p/Makefile cWnn/cd/rk_z/Makefile \
-	cWnn/td/Makefile cWnn/td/rk/Makefile \
-	cWnn/td/rk_z/Makefile cWnn/td/rk_p/Makefile \
-	cWnn/include/Makefile cWnn/jlib/Makefile \
-	cWnn/jserver/Makefile cWnn/jutil/Makefile \
-	cWnn/man/Makefile cWnn/man/1.intro/Makefile cWnn/man/2.env/Makefile \
-	cWnn/man/4.cmd/Makefile cWnn/man/6.jutil/Makefile \
-	cWnn/romkan/Makefile cWnn/uum/Makefile"
-  makefiles_cwnn_dic="cWnn/cdic/Makefile cWnn/tdic/Makefile"
-fi
-
-
-if test "x$kWnn" = "xkWnn"; then
-  makefiles_kwnn="kWnn/Makefile kWnn/conv/Makefile kWnn/etc/Makefile \
-	kWnn/include/Makefile kWnn/jlib/Makefile kWnn/jutil/Makefile \
-	kWnn/jserver/Makefile kWnn/kd/Makefile kWnn/kd/rk/Makefile \
-	kWnn/romkan/Makefile kWnn/uum/Makefile"
-  makefiles_kwnn_dic="kWnn/kdic/Makefile"
-fi
-
-ac_config_files="$ac_config_files ${makefiles_generic} ${makefiles_wnn} ${makefiles_wnn_dic} ${makefiles_cwnn} ${makefiles_cwnn_dic} ${makefiles_kwnn} ${makefiles_kwnn_dic}"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
-  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      *) $as_unset $ac_var ;;
-      esac ;;
-    esac
-  done
-
-  (set) 2>&1 |
-    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
-      sed -n \
-	"s/'/'\\\\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;; #(
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-) |
-  sed '
-     /^ac_cv_env_/b end
-     t clear
-     :clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-  if test -w "$cache_file"; then
-    test "x$cache_file" != "x/dev/null" &&
-      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
-    cat confcache >$cache_file
-  else
-    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`echo "$ac_i" | sed "$ac_script"`
-  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-  #    will be set to the directory where LIBOBJS objects are built.
-  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" ""	$as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line after each line using $LINENO; the second 'sed'
-  # does the real work.  The second script uses 'N' to pair each
-  # line-number line with the line containing $LINENO, and appends
-  # trailing '-' during substitution so that $LINENO is not a special
-  # case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-  # E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
-  case `echo 'x\c'` in
-  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  *)   ECHO_C='\c';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-    as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-# Find out whether ``test -x'' works.  Don't use a zero-byte file, as
-# systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
-  as_executable_p="test -x"
-else
-  as_executable_p=:
-fi
-rm -f conf$$.file
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-
-# Save the log message, to keep $[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.60.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-		   instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf@gnu.org>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.60,
-  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2006 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  *)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    echo "$ac_cs_version"; exit ;;
-  --debug | --debu | --deb | --de | --d | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-    ac_need_defaults=false;;
-  --he | --h)
-    # Conflict between --help and --header
-    { echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit ;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) { echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; } ;;
-
-  *) ac_config_targets="$ac_config_targets $1"
-     ac_need_defaults=false ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
-  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  CONFIG_SHELL=$SHELL
-  export CONFIG_SHELL
-  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-  echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-#
-# INIT-COMMANDS
-#
-
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
-macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
-enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
-pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
-enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
-host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
-host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
-host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
-build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
-build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
-build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
-SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
-Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
-GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
-EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
-FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
-LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
-NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
-LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
-max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
-ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
-exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
-lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
-lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
-lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
-reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
-reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
-deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
-file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
-AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
-AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
-RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
-old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
-CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
-GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
-SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
-ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
-MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
-need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
-DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
-NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
-LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
-libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
-shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
-export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
-allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
-inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
-link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
-fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
-always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
-export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
-variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
-need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
-version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
-runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
-libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
-soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
-old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
-striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
-
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
-
-# Quote evaled strings.
-for var in SED \
-GREP \
-EGREP \
-FGREP \
-LD \
-NM \
-LN_S \
-lt_SP2NL \
-lt_NL2SP \
-reload_flag \
-OBJDUMP \
-deplibs_check_method \
-file_magic_cmd \
-AR \
-AR_FLAGS \
-STRIP \
-RANLIB \
-CC \
-CFLAGS \
-compiler \
-lt_cv_sys_global_symbol_pipe \
-lt_cv_sys_global_symbol_to_cdecl \
-lt_cv_sys_global_symbol_to_c_name_address \
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-SHELL \
-ECHO \
-lt_prog_compiler_no_builtin_flag \
-lt_prog_compiler_wl \
-lt_prog_compiler_pic \
-lt_prog_compiler_static \
-lt_cv_prog_compiler_c_o \
-need_locks \
-DSYMUTIL \
-NMEDIT \
-LIPO \
-OTOOL \
-OTOOL64 \
-shrext_cmds \
-export_dynamic_flag_spec \
-whole_archive_flag_spec \
-compiler_needs_object \
-with_gnu_ld \
-allow_undefined_flag \
-no_undefined_flag \
-hardcode_libdir_flag_spec \
-hardcode_libdir_flag_spec_ld \
-hardcode_libdir_separator \
-fix_srcfile_path \
-exclude_expsyms \
-include_expsyms \
-file_list_spec \
-variables_saved_for_relink \
-libname_spec \
-library_names_spec \
-soname_spec \
-finish_eval \
-old_striplib \
-striplib; do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-    *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Double-quote double-evaled strings.
-for var in reload_cmds \
-old_postinstall_cmds \
-old_postuninstall_cmds \
-old_archive_cmds \
-extract_expsyms_cmds \
-old_archive_from_new_cmds \
-old_archive_from_expsyms_cmds \
-archive_cmds \
-archive_expsym_cmds \
-module_cmds \
-module_expsym_cmds \
-export_symbols_cmds \
-prelink_cmds \
-postinstall_cmds \
-postuninstall_cmds \
-finish_cmds \
-sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec; do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-    *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\$0 --fallback-echo"')  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
-  ;;
-esac
-
-ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
-
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-
-
-    PACKAGE='$PACKAGE'
-    VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
-    RM='$RM'
-    ofile='$ofile'
-
-
-
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
-  case $ac_config_target in
-    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
-    "${makefiles_generic}") CONFIG_FILES="$CONFIG_FILES ${makefiles_generic}" ;;
-    "${makefiles_wnn}") CONFIG_FILES="$CONFIG_FILES ${makefiles_wnn}" ;;
-    "${makefiles_wnn_dic}") CONFIG_FILES="$CONFIG_FILES ${makefiles_wnn_dic}" ;;
-    "${makefiles_cwnn}") CONFIG_FILES="$CONFIG_FILES ${makefiles_cwnn}" ;;
-    "${makefiles_cwnn_dic}") CONFIG_FILES="$CONFIG_FILES ${makefiles_cwnn_dic}" ;;
-    "${makefiles_kwnn}") CONFIG_FILES="$CONFIG_FILES ${makefiles_kwnn}" ;;
-    "${makefiles_kwnn_dic}") CONFIG_FILES="$CONFIG_FILES ${makefiles_kwnn_dic}" ;;
-
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
-  tmp=
-  trap 'exit_status=$?
-  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=./conf$$-$RANDOM
-  (umask 077 && mkdir "$tmp")
-} ||
-{
-   echo "$me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
-}
-
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
-
-_ACEOF
-
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-build!$build$ac_delim
-build_cpu!$build_cpu$ac_delim
-build_vendor!$build_vendor$ac_delim
-build_os!$build_os$ac_delim
-host!$host$ac_delim
-host_cpu!$host_cpu$ac_delim
-host_vendor!$host_vendor$ac_delim
-host_os!$host_os$ac_delim
-SUBDIRS!$SUBDIRS$ac_delim
-WNNMANDIR!$WNNMANDIR$ac_delim
-Wnn!$Wnn$ac_delim
-JSERVER_SUBDIRS2!$JSERVER_SUBDIRS2$ac_delim
-cWnn!$cWnn$ac_delim
-kWnn!$kWnn$ac_delim
-WNNJLIB!$WNNJLIB$ac_delim
-DEPWNNJLIB!$DEPWNNJLIB$ac_delim
-HINSI_DATA!$HINSI_DATA$ac_delim
-CWNNJLIB!$CWNNJLIB$ac_delim
-DEPCWNNJLIB!$DEPCWNNJLIB$ac_delim
-CHINSI_DATA!$CHINSI_DATA$ac_delim
-THINSI_DATA!$THINSI_DATA$ac_delim
-KWNNJLIB!$KWNNJLIB$ac_delim
-DEPKWNNJLIB!$DEPKWNNJLIB$ac_delim
-KHINSI_DATA!$KHINSI_DATA$ac_delim
-ipv6!$ipv6$ac_delim
-unsafe_path!$unsafe_path$ac_delim
-CC!$CC$ac_delim
-CFLAGS!$CFLAGS$ac_delim
-LDFLAGS!$LDFLAGS$ac_delim
-CPPFLAGS!$CPPFLAGS$ac_delim
-ac_ct_CC!$ac_ct_CC$ac_delim
-EXEEXT!$EXEEXT$ac_delim
-OBJEXT!$OBJEXT$ac_delim
-CCOPTIONS!$CCOPTIONS$ac_delim
-CDEBUGFLAGS!$CDEBUGFLAGS$ac_delim
-INSTPGMFLAGS!$INSTPGMFLAGS$ac_delim
-CPP!$CPP$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-LN_S!$LN_S$ac_delim
-SET_MAKE!$SET_MAKE$ac_delim
-LIBTOOL!$LIBTOOL$ac_delim
-SED!$SED$ac_delim
-GREP!$GREP$ac_delim
-EGREP!$EGREP$ac_delim
-FGREP!$FGREP$ac_delim
-LD!$LD$ac_delim
-DUMPBIN!$DUMPBIN$ac_delim
-ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim
-NM!$NM$ac_delim
-OBJDUMP!$OBJDUMP$ac_delim
-AR!$AR$ac_delim
-STRIP!$STRIP$ac_delim
-RANLIB!$RANLIB$ac_delim
-lt_ECHO!$lt_ECHO$ac_delim
-DSYMUTIL!$DSYMUTIL$ac_delim
-NMEDIT!$NMEDIT$ac_delim
-LIPO!$LIPO$ac_delim
-OTOOL!$OTOOL$ac_delim
-_ACEOF
-
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
-    break
-  elif $ac_last_try; then
-    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
-  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-  ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-CEOF$ac_eof
-_ACEOF
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  cat >conf$$subs.sed <<_ACEOF
-OTOOL64!$OTOOL64$ac_delim
-LIBTOOL_DEPS!$LIBTOOL_DEPS$ac_delim
-XMKMF!$XMKMF$ac_delim
-TERMLIB!$TERMLIB$ac_delim
-CNVFILE_SUBDIR!$CNVFILE_SUBDIR$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-JS_SUPPORTOBJS!$JS_SUPPORTOBJS$ac_delim
-WRAPLIB!$WRAPLIB$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
-
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 9; then
-    break
-  elif $ac_last_try; then
-    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
-  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-  ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
-_ACEOF
-
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[	 ]*\):*/\1/
-s/:*$//
-s/^[^=]*=[	 ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-fi # test -n "$CONFIG_FILES"
-
-
-for ac_tag in  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS
-do
-  case $ac_tag in
-  :[FHLC]) ac_mode=$ac_tag; continue;;
-  esac
-  case $ac_mode$ac_tag in
-  :[FHL]*:*);;
-  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
-   { (exit 1); exit 1; }; };;
-  :[FH]-) ac_tag=-:-;;
-  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-  esac
-  ac_save_IFS=$IFS
-  IFS=:
-  set x $ac_tag
-  IFS=$ac_save_IFS
-  shift
-  ac_file=$1
-  shift
-
-  case $ac_mode in
-  :L) ac_source=$1;;
-  :[FH])
-    ac_file_inputs=
-    for ac_f
-    do
-      case $ac_f in
-      -) ac_f="$tmp/stdin";;
-      *) # Look for the file first in the build tree, then in the source tree
-	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
-	 # because $ac_f cannot contain `:'.
-	 test -f "$ac_f" ||
-	   case $ac_f in
-	   [\\/$]*) false;;
-	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-	   esac ||
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-   { (exit 1); exit 1; }; };;
-      esac
-      ac_file_inputs="$ac_file_inputs $ac_f"
-    done
-
-    # Let's still pretend it is `configure' which instantiates (i.e., don't
-    # use $as_me), people would be surprised to read:
-    #    /* config.h.  Generated by config.status.  */
-    configure_input="Generated from "`IFS=:
-	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
-    if test x"$ac_file" != x-; then
-      configure_input="$ac_file.  $configure_input"
-      { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    fi
-
-    case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin";;
-    esac
-    ;;
-  esac
-
-  ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  { as_dir="$ac_dir"
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
-   { (exit 1); exit 1; }; }; }
-  ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
-  case $ac_mode in
-  :F)
-  #
-  # CONFIG_FILE
-  #
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-  esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-
-case `sed -n '/datarootdir/ {
-  p
-  q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p
-' $ac_file_inputs` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  ac_datarootdir_hack='
-  s&@datadir@&$datadir&g
-  s&@docdir@&$docdir&g
-  s&@infodir@&$infodir&g
-  s&@localedir@&$localedir&g
-  s&@mandir@&$mandir&g
-    s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-$ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&2;}
-
-  rm -f "$tmp/stdin"
-  case $ac_file in
-  -) cat "$tmp/out"; rm -f "$tmp/out";;
-  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-  esac
- ;;
-  :H)
-  #
-  # CONFIG_HEADER
-  #
-_ACEOF
-
-# Transform confdefs.h into a sed script `conftest.defines', that
-# substitutes the proper values into config.h.in to produce config.h.
-rm -f conftest.defines conftest.tail
-# First, append a space to every undef/define line, to ease matching.
-echo 's/$/ /' >conftest.defines
-# Then, protect against being on the right side of a sed subst, or in
-# an unquoted here document, in config.status.  If some macros were
-# called several times there might be several #defines for the same
-# symbol, which is useless.  But do not sort them, since the last
-# AC_DEFINE must be honored.
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
-# NAME is the cpp macro being defined, VALUE is the value it is being given.
-# PARAMS is the parameter list in the macro definition--in most cases, it's
-# just an empty string.
-ac_dA='s,^\\([	 #]*\\)[^	 ]*\\([	 ]*'
-ac_dB='\\)[	 (].*,\\1define\\2'
-ac_dC=' '
-ac_dD=' ,'
-
-uniq confdefs.h |
-  sed -n '
-	t rset
-	:rset
-	s/^[	 ]*#[	 ]*define[	 ][	 ]*//
-	t ok
-	d
-	:ok
-	s/[\\&,]/\\&/g
-	s/^\('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
-	s/^\('"$ac_word_re"'\)[	 ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
-  ' >>conftest.defines
-
-# Remove the space that was appended to ease matching.
-# Then replace #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-# (The regexp can be short, since the line contains either #define or #undef.)
-echo 's/ $//
-s,^[	 #]*u.*,/* & */,' >>conftest.defines
-
-# Break up conftest.defines:
-ac_max_sed_lines=50
-
-# First sed command is:	 sed -f defines.sed $ac_file_inputs >"$tmp/out1"
-# Second one is:	 sed -f defines.sed "$tmp/out1" >"$tmp/out2"
-# Third one will be:	 sed -f defines.sed "$tmp/out2" >"$tmp/out1"
-# et cetera.
-ac_in='$ac_file_inputs'
-ac_out='"$tmp/out1"'
-ac_nxt='"$tmp/out2"'
-
-while :
-do
-  # Write a here document:
-    cat >>$CONFIG_STATUS <<_ACEOF
-    # First, check the format of the line:
-    cat >"\$tmp/defines.sed" <<\\CEOF
-/^[	 ]*#[	 ]*undef[	 ][	 ]*$ac_word_re[	 ]*\$/b def
-/^[	 ]*#[	 ]*define[	 ][	 ]*$ac_word_re[(	 ]/b def
-b
-:def
-_ACEOF
-  sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
-  echo 'CEOF
-    sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
-  ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
-  sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
-  grep . conftest.tail >/dev/null || break
-  rm -f conftest.defines
-  mv conftest.tail conftest.defines
-done
-rm -f conftest.defines conftest.tail
-
-echo "ac_result=$ac_in" >>$CONFIG_STATUS
-cat >>$CONFIG_STATUS <<\_ACEOF
-  if test x"$ac_file" != x-; then
-    echo "/* $configure_input  */" >"$tmp/config.h"
-    cat "$ac_result" >>"$tmp/config.h"
-    if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      rm -f $ac_file
-      mv "$tmp/config.h" $ac_file
-    fi
-  else
-    echo "/* $configure_input  */"
-    cat "$ac_result"
-  fi
-  rm -f "$tmp/out12"
- ;;
-
-  :C)  { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-echo "$as_me: executing $ac_file commands" >&6;}
- ;;
-  esac
-
-
-  case $ac_file$ac_mode in
-    "libtool":C)
-
-    # See if we are running on zsh, and set the options which allow our
-    # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
-      setopt NO_GLOB_SUBST
-    fi
-
-    cfgfile="${ofile}T"
-    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
-    $RM "$cfgfile"
-
-    cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-
-# The names of the tagged configurations supported by this script.
-available_tags=""
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Which release of libtool.m4 was used?
-macro_version=$macro_version
-macro_revision=$macro_revision
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# What type of objects to build.
-pic_mode=$pic_mode
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="\$SED -e 1s/^X//"
-
-# A grep program that handles long lines.
-GREP=$lt_GREP
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# A literal string matcher.
-FGREP=$lt_FGREP
-
-# A BSD- or MS-compatible name lister.
-NM=$lt_NM
-
-# Whether we need soft or hard links.
-LN_S=$lt_LN_S
-
-# What is the maximum length of a command?
-max_cmd_len=$max_cmd_len
-
-# Object file suffix (normally "o").
-objext=$ac_objext
-
-# Executable file suffix (normally "").
-exeext=$exeext
-
-# whether the shell understands "unset".
-lt_unset=$lt_unset
-
-# turn spaces into newlines.
-SP2NL=$lt_lt_SP2NL
-
-# turn newlines into spaces.
-NL2SP=$lt_lt_NL2SP
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# An object symbol dumper.
-OBJDUMP=$lt_OBJDUMP
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == "file_magic".
-file_magic_cmd=$lt_file_magic_cmd
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A symbol stripping program.
-STRIP=$lt_STRIP
-
-# Commands used to install an old-style archive.
-RANLIB=$lt_RANLIB
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# A C compiler.
-LTCC=$lt_CC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_CFLAGS
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration.
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair.
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# Transform the output of nm in a C name address pair when lib prefix is needed.
-global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# An echo program that does not interpret backslashes.
-ECHO=$lt_ECHO
-
-# Used to examine libraries when file_magic_cmd begins with "file".
-MAGIC_CMD=$MAGIC_CMD
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
-DSYMUTIL=$lt_DSYMUTIL
-
-# Tool to change global to local symbols on Mac OS X.
-NMEDIT=$lt_NMEDIT
-
-# Tool to manipulate fat objects and archives on Mac OS X.
-LIPO=$lt_LIPO
-
-# ldd/readelf like tool for Mach-O binaries on Mac OS X.
-OTOOL=$lt_OTOOL
-
-# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
-OTOOL64=$lt_OTOOL64
-
-# Old archive suffix (normally "a").
-libext=$libext
-
-# Shared library suffix (normally ".so").
-shrext_cmds=$lt_shrext_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at link time.
-variables_saved_for_relink=$lt_variables_saved_for_relink
-
-# Do we need the "lib" prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Library versioning type.
-version_type=$version_type
-
-# Shared library runtime path variable.
-runpath_var=$runpath_var
-
-# Shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Command to use after installation of a shared archive.
-postinstall_cmds=$lt_postinstall_cmds
-
-# Command to use after uninstallation of a shared archive.
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# As "finish_cmds", except a single script fragment to be evaled but
-# not shown.
-finish_eval=$lt_finish_eval
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Compile-time system search path for libraries.
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Commands used to build an old-style archive.
-old_archive_cmds=$lt_old_archive_cmds
-
-# A language specific compiler.
-CC=$lt_compiler
-
-# Is the compiler the GNU compiler?
-with_gcc=$GCC
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
-
-# Whether or not to disallow shared libs when runtime libs are static.
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Whether the compiler copes with passing no objects directly.
-compiler_needs_object=$lt_compiler_needs_object
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-
-# Commands used to build a loadable module if different from building
-# a shared archive.
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
-
-# Whether we are building with GNU ld or not.
-with_gnu_ld=$lt_with_gnu_ld
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that enforces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# If ld is used when linking, flag to hardcode \$libdir into a binary
-# during linking.  This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-
-# Whether we need a single "-rpath" flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
-# DIR into the resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
-# DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
-# library is relocated.
-hardcode_direct_absolute=$hardcode_direct_absolute
-
-# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
-# into the resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
-# into the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Set to "yes" if building a shared library automatically hardcodes DIR
-# into the library and all subsequent libraries and executables linked
-# against it.
-hardcode_automatic=$hardcode_automatic
-
-# Set to yes if linker adds runtime paths of dependent libraries
-# to runtime path list.
-inherit_rpath=$inherit_rpath
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to "yes" if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# Commands necessary for linking programs (against libraries) with templates.
-prelink_cmds=$lt_prelink_cmds
-
-# Specify filename containing input files.
-file_list_spec=$lt_file_list_spec
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
-  case $host_os in
-  aix3*)
-    cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-_LT_EOF
-    ;;
-  esac
-
-
-ltmain="$ac_aux_dir/ltmain.sh"
-
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  case $xsi_shell in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-  func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
-  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-  # positional parameters, so assign one to ordinary parameter first.
-  func_stripname_result=${3}
-  func_stripname_result=${func_stripname_result#"${1}"}
-  func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=${1%%=*}
-  func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  case ${1} in
-    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-    *)    func_lo2o_result=${1} ;;
-  esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=$(( $* ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=${#1}
-}
-
-_LT_EOF
-    ;;
-  *) # Bourne compatible functions.
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-  case ${2} in
-    .*) func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
-  esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[^=]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=`expr "$@"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
-esac
-
-case $lt_shell_append in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$1+=\$2"
-}
-_LT_EOF
-    ;;
-  *)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$1=\$$1\$2"
-}
-
-_LT_EOF
-    ;;
-  esac
-
-
-  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" ||
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-
- ;;
-
-  esac
-done # for ac_tag
-
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
-fi
-