Mercurial > geeqie
diff README.lirc @ 528:bf9c9e37adf4
Added LIRC patch written by Matteo Beniamino
author | nadvornik |
---|---|
date | Sun, 27 Apr 2008 20:05:11 +0000 |
parents | |
children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/README.lirc Sun Apr 27 20:05:11 2008 +0000 @@ -0,0 +1,128 @@ +Linux Infrared Remote Control - use an easy to build home-brewn IR-receiver, an +(almost) arbitrary remote control and control your Linux box with it! More +about it at www.lirc.org. Be sure to read LIRC documentation before going ahead +in this README. + +If you have installed the lirc-package, configure will autodetect it. If LIRC +support is enabled and an error occurs Geeqie will tell you on startup. The +application name for Geeqie is geeqie. Here is the list of supported commands: + +DOWN [int] - Move "camera" down by the specified amount. Default=1 +EXIT - Exit Geeqie +FIRST - Jump to first image +INFO - Show image information (full screen only) +LAST - Jump to last image +LEFT [int] - Move "camera" left by the specified amount. Default=1 +NEXT - Go to next image +PAUSE - Pause/unpause slideshow +PREV - Go to previous image +RIGHT [int] - Move "camera" right by the specified amount. Default=1 +ROTATE_90 - Rotate image 90 degrees clockwise. +ROTATE_90_CC - Rotate image 90 degrees counter-clockwise. +SET_INV_ZOOM [int] - Zoom to 1/Nx. Deafult=1x +SET_ZOOM [int] - Zoom to Nx. Default=1x +UP [int] - Move "camera" up by the specified amount. Default=1 +ZOOM_IN [int] - Zoom in. Value specifies the amount of zoom. +ZOOM_MAX - Zoom to fit image +ZOOM_OUT [int] - Zoom out. Value specifies the amount of zoom. + +Don't forget to enable the repeat flag in .lircrc when it make sense +(directional buttons, zoom in and out, ...) +Here's an excerpt from my .lircrc: + +begin geeqie + begin + prog = geeqie + button = vol_up + config = ZOOM_IN 1 + repeat = 3 + end + begin + prog = geeqie + button = vol_down + config = ZOOM_OUT 1 + repeat = 3 + end + begin + prog = geeqie + button = down + config = DOWN 10 + repeat = 1 + end + begin + prog = geeqie + button = up + config = UP 10 + repeat = 1 + end + begin + prog = geeqie + button = right + config = RIGHT 10 + repeat = 1 + end + begin + prog = geeqie + button = left + config = LEFT 10 + repeat = 1 + end + begin + prog = geeqie + button = back + config = PREV + end + begin + prog = geeqie + button = forw + config = NEXT + end + begin + prog = geeqie + button = skip_back + config = FIRST + end + begin + prog = geeqie + button = skip_forw + config = LAST + end + begin + prog = geeqie + button = pause + config = PAUSE + end + begin + prog = geeqie + button = surround + config = SET_ZOOM + end + begin + prog = geeqie + button = 1 + config = ROTATE_90 + end + begin + prog = geeqie + button = 2 + config = ROTATE_90_CC + end + begin + prog = geeqie + button = 3 + config = INFO + end + begin + prog = geeqie + button = 4 + config = EXIT + end +end geeqie + +At the moment Geeqie uses the standard location for the lirc-config file +(~/.lircrc). + +LIRC support and documentation by Matteo Beniamino +<beniamino@tautologica.org>. + +(This file is 'inspired' by LIRC documentation from mplayer).