Mercurial > geeqie
view README.lirc @ 706:066b90ad9925
cache_find_location(): use g_build_filename() and move redundant code to new functions.
author | zas_ |
---|---|
date | Tue, 20 May 2008 22:47:13 +0000 |
parents | bf9c9e37adf4 |
children |
line wrap: on
line source
Linux Infrared Remote Control - use an easy to build home-brewn IR-receiver, an (almost) arbitrary remote control and control your Linux box with it! More about it at www.lirc.org. Be sure to read LIRC documentation before going ahead in this README. If you have installed the lirc-package, configure will autodetect it. If LIRC support is enabled and an error occurs Geeqie will tell you on startup. The application name for Geeqie is geeqie. Here is the list of supported commands: DOWN [int] - Move "camera" down by the specified amount. Default=1 EXIT - Exit Geeqie FIRST - Jump to first image INFO - Show image information (full screen only) LAST - Jump to last image LEFT [int] - Move "camera" left by the specified amount. Default=1 NEXT - Go to next image PAUSE - Pause/unpause slideshow PREV - Go to previous image RIGHT [int] - Move "camera" right by the specified amount. Default=1 ROTATE_90 - Rotate image 90 degrees clockwise. ROTATE_90_CC - Rotate image 90 degrees counter-clockwise. SET_INV_ZOOM [int] - Zoom to 1/Nx. Deafult=1x SET_ZOOM [int] - Zoom to Nx. Default=1x UP [int] - Move "camera" up by the specified amount. Default=1 ZOOM_IN [int] - Zoom in. Value specifies the amount of zoom. ZOOM_MAX - Zoom to fit image ZOOM_OUT [int] - Zoom out. Value specifies the amount of zoom. Don't forget to enable the repeat flag in .lircrc when it make sense (directional buttons, zoom in and out, ...) Here's an excerpt from my .lircrc: begin geeqie begin prog = geeqie button = vol_up config = ZOOM_IN 1 repeat = 3 end begin prog = geeqie button = vol_down config = ZOOM_OUT 1 repeat = 3 end begin prog = geeqie button = down config = DOWN 10 repeat = 1 end begin prog = geeqie button = up config = UP 10 repeat = 1 end begin prog = geeqie button = right config = RIGHT 10 repeat = 1 end begin prog = geeqie button = left config = LEFT 10 repeat = 1 end begin prog = geeqie button = back config = PREV end begin prog = geeqie button = forw config = NEXT end begin prog = geeqie button = skip_back config = FIRST end begin prog = geeqie button = skip_forw config = LAST end begin prog = geeqie button = pause config = PAUSE end begin prog = geeqie button = surround config = SET_ZOOM end begin prog = geeqie button = 1 config = ROTATE_90 end begin prog = geeqie button = 2 config = ROTATE_90_CC end begin prog = geeqie button = 3 config = INFO end begin prog = geeqie button = 4 config = EXIT end end geeqie At the moment Geeqie uses the standard location for the lirc-config file (~/.lircrc). LIRC support and documentation by Matteo Beniamino <beniamino@tautologica.org>. (This file is 'inspired' by LIRC documentation from mplayer).