diff README @ 1:8b1883341c6f

Initial revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/README	Mon Aug 05 19:46:57 2002 +0000
@@ -0,0 +1,291 @@
+gFTP README
+-----------
+
+[Requirements]
+
+* gtk+ 1.2.3 or higher. You will also need to download glib as well. You can
+  download them directly from my website or from the gtk+ ftp site at
+  ftp://ftp.gtk.org/pub/gtk/v1.2. 
+* X11R6 or later.
+* pthread libraries. If you have a libc6 based machine (Debian >= 2.x, Red Hat 
+  >= 5.x), you should already have the pthread libraries installed. If you 
+  have a libc5 based machine (Slackware < 7.0), you will need to install 
+  LinuxThreads from my website. Also, if you don't have LinuxThreads installed,
+  you most likely don't have thread safe X libraries. You must have thread 
+  safe X libraries or gFTP will constantly crash. You can download some thread 
+  safe X libraries off my website. If you are on a platform other than Linux, 
+  you may want to take a look at the FSU Pthreads library at 
+  http://www.informatik.hu-berlin.de/~mueller/pthreads.
+* I would recommend running X in at least 800x600 mode.
+* pkgconfig 0.9.0 or newer.  pkgconfig is available at
+  http://www.freedesktop.org/software/pkgconfig.
+
+[Installation Instructions]
+
+* If you do not want to compile this program yourself, you can check my
+  webpage for some precompiled Linux binaries.
+* If you are compiling gFTP yourself, extract the files from the distribution 
+  with tar -zxvf gftp-<version>.tar.gz
+* Go to the gftp-<version> directory and type 
+	
+	./configure
+	make
+
+  The configure script will generate a Makefile for your machine, and make
+  will compile a binary for your machine. By default, when you run
+  configure, it will install gFTP with the prefix /usr/local, so the gFTP
+  binary will be /usr/local/bin/gftp. You can change this by typing 
+  configure --prefix=/usr, and it will then install the gFTP binary in 
+  /usr/bin/gftp.
+* If the compile suceeds without any errors, you can type make install to 
+  install the binary. This will also copy some necessary
+  files to <install prefix>/share/gftp. If you do not have root on your 
+  machine to install these files, copy the contents of the docs/sample.gftp/ 
+  directory to ~/.gftp.
+* [OPTIONAL] If you compiled gFTP on a platform other than Linux, could you
+  please send me your OS name/version and I will post on my website
+  the operating systems gFTP has been successfully compiled on.
+* You may want to glance at the USERS-GUIDE file that comes with this
+  distribution. It contains a little bit of information about how to use it.
+
+[Frequently Asked Questions]
+
+Here is a list of frequently asked questions about gFTP. You can always find
+the latest version of this FAQ off my website.
+
+*******************************************************************************
+
+Q: I'm having problems with installing the RPMs off of your website. 
+
+A: If the RPM installs fine, but when you run gFTP, if you get an error about the symbol GCC_3.0 not found, then you need to recompile the RPM. Or if you try to install the RPM and you get an error about unresolved dependency libreadline.so.1 and you have the readline RPM installed, you'll also have to get a different gFTP RPM. The RPMs on my website I built on a Debian GNU/Linux i386 box with gcc 3.0.3.
+
+I would first suggest checking your distributions development tree (RedHat Rawhide or Mandrake Cooker for example), they probably have a RPM of the latest gFTP there. If not, download the SRC RPM and type rpm -i gftp-version-1.src.rpm. It will build a RPM and put it in /usr/src/redhat/RPMS/arch or /usr/src/rpm/RPMS/arch (arch is i386, sparc, axp, etc...)
+
+
+*******************************************************************************
+
+Q: What systems is gFTP known to run on?
+
+A: I develop gFTP on a Debian GNU/Linux machine. Here is a list of other 
+   platforms I have received successful compile reports on: 
+
+     * FreeBSD/NetBSD/OpenBSD/BSDI
+     * Solaris 
+     * IRIX
+     * Digital UNIX
+     * HP/UX 11
+
+   If you got gFTP to compile on a platform not listed here, please email me 
+   about it and I'll add it to this list. If you are having problems compiling 
+   gtk+ or gFTP on another platform, try using GNU make instead of your vendor 
+   supplied make. Most of the vendor supplied makes are brain-dead. 
+
+*******************************************************************************
+
+Q: I'm having problems getting SSH2 transfers to work. I keep getting the error:
+   Error: Message size XXXXXXXX too big from server
+
+A: What probably is the problem, sftp-server isn't in your path on the remote
+   server. When you try to connect to the remote server, you'll see the command
+   gFTP is trying to run, and it'll look something like:
+
+   ssh -e none -l username hostname "echo -n xsftp ;  sftp-server"
+
+   Try running this command. If you get a prompt asking:
+
+   The authenticity of host 'hostname (###.###.###.###)' can't be established.
+   RSA key fingerprint is xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx.
+   Are you sure you want to continue connecting (yes/no)?
+
+   Tell it yes. gFTP won't even try to answer this question for you at the
+   moment. Then, if you get the following output:
+
+   Enter passphrase for key '/home/brian/.ssh/id_dsa':
+   xsftp
+   bash: sftp-server: command not found
+
+   You'll have to set the path to the sftp-server program. Alternatively you 
+   could go under FTP->Options->SSH and enable Use sftp subsys. If you enable
+   this, then you don't have to know the remote path to your sftp executable.
+   But if you enable this, gFTP won't be able to send your password over to
+   the ssh client. So if you're not using ssh-agent, then ssh will spawn the
+   ssh-askpass program to grab your password.
+
+*******************************************************************************
+
+Q: What is the difference between the SSH and SSH2 protocols?
+
+A: The SSH protocol uses sftp >= 0.7 from http://www.xbill.org/sftp. SSH2 uses
+   the native file transfers found in the commercial SSH2 and in later versions
+   of OpenSSH. The SSH2 protocol uses the sftp-server executable on the remote 
+   host and the SSH protocol uses the sftpserv executable.
+
+*******************************************************************************
+
+Q: How do I force running the text or gtk+ version of gFTP?
+
+A: To run the text port, you can type gftp-text or to run the gtk+ port, you
+   can run the gftp-gtk. The gftp command is just a shell script that sees
+   if your DISPLAY variable is set, and if so it'll run the appropriate version
+
+*******************************************************************************
+
+Q: Is there a way for gFTP to download a bunch of files/directories and then
+   exit when it's completed?
+
+A: Yes, the text port of gFTP supports this well. You can type:
+
+   gftp-text -d ftp://ftp.somesite.com/someplace
+
+   If someplace is a directory, it'll automatically download all its subdirs
+   as well. If you want to transfer a file through ssh instead of ftp, just
+   change the ftp:// to ssh://
+
+*******************************************************************************
+
+Q: In the GTK+ version of gFTP, do I have to enter a port, username and password
+   to connect to a ftp server?
+
+A: No you don't. If you leave the port blank, it'll default to the default port
+   for the protocol you selected (port 21 for FTP). If you leave the username
+   blank, it will default to logging in as anonymous
+
+*******************************************************************************
+
+Q: How do I set up my HTTP Proxy server?
+
+A: Go under FTP->Options and hit the FTP tab. Enter HTTP as the proxy type
+   and fill in your proxy server info on that screen. Then hit the HTTP tab
+   and enter your same proxy server info there.
+
+*******************************************************************************
+
+Q: When gFTP tries to get the remote directory listing, it sends LIST -L, but
+   the remote server sends an error back
+
+A: Go to FTP->Options and turn off resolve remote symlinks. gFTP will then send
+   LIST instead of LIST -L. You should only have to do this if you are
+   connecting to Novell servers.
+
+*******************************************************************************
+
+Q: When gFTP tries to get the remote directory listing, I get an error that
+   says: Cannot create a data connection: Connection refused
+
+A: Go under FTP->Options and turn off passive file transfers. Instead of 
+   sending the PASV command to open up the data connection on the server side,
+   the data connection will be opened up on the client side, and the PORT
+   command will be sent to the server instead.
+
+*******************************************************************************
+
+Q: When I try to compile gFTP, I get some errors. One of them is undefined
+   symbol LC_ALL
+
+A: Try typing make distclean ; configure --with-included-gettext and it
+   should compile fine then. 
+
+*******************************************************************************
+
+Q: How do I report bugs in gFTP?
+
+A: If you find ANY bugs in gFTP, please email them to me at
+   [e-mail]. If there is a newer version of gFTP available,
+   please try it first before you send me a bug report. If the problem
+   exists in that version, feel free to email me about it. When sending in 
+   bug reports, please try to be as descriptive as possible. Send me what 
+   OS/version you are running, what compiler you are compiling with, and any 
+   other important information. If you get gFTP to crash, it would be very 
+   helpful if you could send me a backtrace. If you do not know how to do a 
+   backtrace, download the source code from my website. Edit the Makefile,
+   and make sure that -g appear in the CFLAGS variable. Then recompile gFTP,
+   but do NOT do a make install because it will install a stripped binary in 
+   $PREFIX/bin. Then type gdb ./gftp. Once you have a (gdb) prompt, type r.
+   Once you get gFTP to crash, go back to that terminal window, and type bt,
+   and send me that output in an email message along with a short description
+   of how it happened.
+
+*******************************************************************************
+
+Q: I downloaded a binary off the internet and everytime I run gFTP I get an
+   error saying: undefined symbol :__register_frame_info
+
+A: ObiTuarY <[e-mail]> says:
+
+   "This happens when you compile a library with egcs. The library then has 
+   the __register_frame_info symbol. If you link a program to it, it will 
+   require this symbol. Now if you have the exact same library compiled with
+   gcc 2.7.2.3 it won't have this symbol. The thing about glibc 2.1 under Red 
+   Hat 6 is it was compiled with egcs and glibc 2.0.x under Red Hat 5.x was 
+   compiled with gcc 2.7.2.3, therefore it's not an incompatibility between 
+   glibc 2.0.x and 2.1.x. What some people do for that is they get the .o file 
+   of egcs with __register_frame_info in it and link into the program so it's 
+   always there, that way it works with libs compiled with egcs or gcc 2.7.2.3.
+   (in /usr/lib/gcc-lib/i386-*-linux/egcs-*/ )"
+
+   Another alternative, is to recompile gFTP on your machine, or you can
+   download some RPMs off my website that were compiled against Red Hat 5.2.
+
+*******************************************************************************
+
+Q: I upgraded to a newer version of gFTP and now I am getting some warnings
+   about some config file lines not having enough arguments, and it cannot find
+   html.xpm. 
+
+A: This is from upgrading from a very old version of gFTP to a newer version. 
+   I removed some icons from the distribution (0.20 to 0.21). Edit your 
+   ~/.gftp/gftprc file. At the bottom of the file, there are some ext= lines. 
+   Some of them have html.xpm, rpm.xpm and pdf.xpm. Remove these lines and gFTP 
+   will startup fine. Don't worry about fixing he warnings...they will go away 
+   themselves.
+
+*******************************************************************************
+
+Q: Where does gFTP store it's options?
+
+A: gFTP will automatically create a ~/.gftp directory when it is first run.
+   Your config file is ~/.gftp/gftprc, and this is where all of gFTP's
+   settings are stored. The config file is well commented, so take a glance
+   at it and see if there is anything you want to change. Your bookmarks are
+   stored in the file ~/.gftp/bookmarks
+
+*******************************************************************************
+
+Q: I am trying to compile your program and I get some parse errors before
+   GdkDragContext. What's wrong?
+
+A: You have an older version of gtk installed on your system. If you are
+   using Red Hat or Debian Linux, simply remove the gtk and glib devel
+   packages. You can still leave the gtk 1.0 libraries installed.
+
+*******************************************************************************
+
+Q: I am having a hard time using the drag and drop in gFTP. How do I use it?
+
+A: To drag from the file listboxes in gFTP, you have to drag with button #3.
+   On a two button mouse, you have to hold down both buttons. For this to work
+   tho, you have to edit your XF86Config file, and go to the Pointer section.
+   You have to make sure Emulate3Buttons is in there. Here's the section out of
+   my config file:
+
+   Section "Pointer"
+      Protocol        "PS/2"             # This will depend on your mouse
+      Device          "/dev/mouse"       # This will also depend on your mouse
+      Emulate3Buttons                    # You need this for a 2 button mouse
+   EndSection
+
+*******************************************************************************
+
+Q: I have a libc 5 based machine and everytime I run gFTP it instantly crashes. 
+   I get an error something like: Gdk-ERROR **: an x io error occurred 
+   What's wrong?
+
+A: Your X libraries are not thread safe. They must be compiled with 
+   -D_REENTRANT. You can either recompile your X libraries, or you can
+   download some from my webpage at
+   http://www.gftp.org/XFree86-libs-3.3-2_threading.i386.tgz
+
+
+Brian Masney <[e-mail]> 
+gFTP Official Webpage - http://www.gftp.org/
+