Mercurial > gftp.yaz
view ChangeLog-old @ 666:8ff1c1647b95
2005-1-18 Brian Masney <masneyb@gftp.org>
* lib/protocols.c (gftp_get_next_file) - if the remote server sends a
path with the filename, then strip the path off of the filename. If the
path didn't match the current directory, then give the user a warning.
A malicious server could change the path of the downloaded by adding
/../ to the path
author | masneyb |
---|---|
date | Wed, 19 Jan 2005 01:56:48 +0000 |
parents | d2bf2d3b0173 |
children | 8bb9f5e08cc4 |
line wrap: on
line source
Changes from 2.0.17 to 2.0.18rc1 * SSH2: Improved the login code. You no longer need to specify in gFTP the path to the sftp-server binary on the remote server. It will now just work out of the box for most sites. Also, if the SSH binary is asking a question, this question will be relayed back through the gFTP user interface so the user can answer it appropriately. * SSH2: Added support for RSA SecurID passwords * FTP, SSH2: Added support for preserving the file date/time * FTP: Fixed IPv6 connection problem * More 64 bit cleanups * More largefile fixes * Fixed detection of SIGCHLD signal when viewing/editing files * Added remote_lc_time option. The value of LC_TIME can now be overridden on a per site basis. This will fix problems parsing the dates in the remote directory listings * Some more GNOME HIG fixes * Fixed several segfaults in the bookmarks editor * Save the state of the host, user and port fields in the toolbar * Fixed compiler errors on OpenBSD and HPUX * Many other small changes and improvements. See the ChangeLog file in the distribution for a detailed list of changes. * New language translations and updates (bg cs en_CA en_GB es fi he hu ja nl pa pt_BR ru sq) Changes from 2.0.16 to 2.0.17 * Separated out more of the UI independent code in the GTK+ and Text ports and created a user interface common repository. Cleaned up some of the existing GTK+ code. The GTK+ port can now be controlled from a command line interface in the GUI. There is an option you have to enable in the options dialog for this. (enable manual commands in GUI) * Added support for the FTPS protocol. The control connection is the only one encrypted at the moment. * When viewing/editing a file, the temporary file that is created is created with the same extension as the remote file so that syntax highlighting works * File transfers can be resumed/skipped/overwritten in the text port and whenever files are dropped on gftp in the GTK+ port. * FTP: Added support for MVS directory listings * FTP: Fix for FXP transfers * SSH2: fix for resuming uploads * Added option to show the transfer status in the title bar. * Added option to disable IPV6 support. * Fixed the wrong date being displayed when a file was modified last year * 64 bit cleanups. This also fixed a SSH segfault that was happening on FreeBSD * Look for the .gmo translation files in the proper directory * If a bookmarked site has it's password saved in the config file, then the passwords are written out in a scrambled format. This isn't secure, but it'll prevent someone from casually looking over your shoulder and seeing your password. I still do not recommend saving your passwords to disk. * Fix for systems that do not support the %'ld format argument * The startup directory option is now expanded so that an option like ~/src can be specified * New language translations and updates (ca cs de ga hr hu nl pt_BR sr sr@Latn ta th) * Many other small changes and improvements. See the ChangeLog file in the distribution for a detailed list of changes. Changes from 2.0.15 to 2.0.16 * Fixed bug where the local directory listing was not updated when connecting to a bookmarked site. * Fix for Novell directory paths (//share/directory) * Local: If there is a dangling symlink in the local directory, not all of the files were being shown. * FTP: Fixed rename bug * FTP: Fixed editing the FTP proxy config in the FTP port. * FTP: Better error checking when establishing the data connection. * FTP: File transfers are aborted correctly. You will not lose your connection to the remote server. * FTP: Ascii file transfers fix. * HTTP: Fixed parsing some chunked file transfers. * SSH: Fixed crash when deleting subdirectories. * When editing remote files, and if the current directory is changed on the remote server, make sure the file is still uploaded to the proper location. * When editing a remote file, if the connection to the remote server times out, immediately reconnect when the file is uploaded. * DND cleanups * If the source is compiled with -D_GNU_SOURCE, then use the current style for the current locale to separate numbers. * In some cases, if the remote_charset is defined for the remote host, convert the current string from UTF8 to the users remote character set. * Fixed Cray directory directory listings. Also, some UNIX directory listings that had files with multiple spaces were being mistaken for Cray directory listings. * The README/FAQ is now stored in Docbook format. * New language translations and updates (az bn el es hr it ja nl no pt ro sk sr) * Many other small changes and improvements. See the ChangeLog file in the distribution for a detailed list of changes. Changes from 2.0.15rc2 to 2.0.15 * FTP: Fixes for selecting ASCII/Binary transfers * Fixed crash when deleting files in the GTK+ port * Fixed parsing directory listings that have timestamps that are not in the current locale. * More largefile support fixes. * Updated translations (cs, pl, sr, sr@Latn, sv) Changes from 2.0.15rc1 to 2.0.15rc2 * Largefile (>2.1GB) fixes. * When resuming files, look up the right option name. gFTP would bail out whenever it couldn't look up the right option. * Fixes to the permissions of files when they are first transfered. New files are created with the mode 0644 & ~umask. * Change to the proper local directory when one was enabled with a bookmark. * Fixed crash that would occur in the options dialog when you hit Apply, then OK. * Fixed possible division by 0 when transfering a file. * Fixed double free of a gftp_file structure member (utf8_file). This was not present in 2.0.14. * FreeBSD PTY and password prompt fixes. * Detect write errors properly. * Added --info argument to the command line. This will give some information about how gFTP was compiled. Changes from 2.0.14 to 2.0.15rc1 * I18N improvements in GTK+ 2.0 port. If the remote server is not returning output in UTF8, it will first attempt to convert it from the local character set and if that fails it will try the character sets listed in the remote_charsets option. * Added an improved internal configuration interface. You can now override just about any option in the bookmarks dialog for a particular site. * Each protocol that gFTP supports is now completely self contained in it's own file. So, if gFTP doesn't support your favorite protocol, it should be pretty easy to add support * When you attempt to connect to a site and there is a fatal error, gFTP will abort properly and no longer keep trying to log back into the server. * Fixes for transferring files greater than 2.1GB. * Improved throttling of file transfers. * Added support to expire cache entries after a particular period of time. * FTP: Added IPV6 support. gFTP is almost 100% IPV6 compatible. If you are not using a proxy server, you will not run into any issues. The list of local networks to not use the proxy server is still currently IPV4 only. * FTP: Added ability to parse VMS directory listings. * FTP: The firewall_* options were renamed to ftp_proxy_* for better consistency with the other protocols. * SSH2: More informative error messages when the initial connection to the remote server fails. You should hopefully not see those "Messages size too big" error messages anymore. * SSH2: Improved the PTY interface. * Removed legacy SSH protocol. THe SSH2 protocol is now the only SSH protocol supported. You had to enable an option in 2.0.14 to be able to use this protocol. * HTTP: Lots of improvements to this protocol. * Added support for the HTTPS protocol. I added a generic SSL layer to the code so that other SSL protocols can be easily added. * The bookmarks and configuration file is now only written if something changed during this session. * Build fixes for various platforms * Lots of cleanups and improvements to the core library. Also lots of bug fixes throughout the code. * New language translations and updates (am ar ca cs es fr hu ja mk ms nl pl pt pt_BR ru sr sr@Latn sv tr uk zh_TW). Thanks to everybody that has contributed language updates! Changes from 2.0.14rc1 to 2.0.14 * Added key bindings to edit dialogs * Don't ask for SSH password in bookmarks if it's disabled in the config file * Binary/Ascii fixes for ext= lines in the config file * SSH - if the word WARNING appears in the banner, don't log into the server * Updated translations: French, German, Polish and Simplified Chinese Changes from 2.0.13 to 2.0.14rc1 * GTK+ 2.0 improvements - i18n fixes, uses more stock icons * SSHV2 fixes (timeout fixes, improved login) * Small cleanups to the rest of the supported protocols * Improved directory sorting performance * Added save directory listing * Large file support * When canceling transfers, you most likely won't be disconnected from the remote site * DND improvements * Fixed several small bugs * Added/updated translations: Bulgarian, Danish, Dutch, French, German, Hungarian, Japanese, Korean, Polish, Romanian, Russian, Spanish, Traditional Chinese Changes from 2.0.12 to 2.0.13 * Added bookmark protocol. You can now connect to a bookmarked site via the command line by running: gftp "bookmark://Debian Sites/Debian" * Several improvements to the text port * GTK+ 2.0 fixes * Added ability to parse Cray FTP directory listings * Fixed crash that would occur if you tried to download a file you didn't have permission to * Fixed crash in view/edit file if the transfer was appended onto an existing transfer * Fixed bug with current KB/s being wrong if the transfer was interrupted * Fixed bug when a file was dropped to gftp, the file size wasn't shown * Fixed crash in bookmarks editor if you tried to save a folder entry * Disabled older SSH protocol, now only the SSH2 protocol is shown. If you require the older protocol, edit your ~/.gftp/gftprc file and set enable_old_ssh to 1 * Removed confirm delete, preserve permissions, save geometry and use cache options. These are always enabled now * Removed logfile option. This always defaults to ~/.gftp/gftp.log now * Removed bring up reconnect dialog option. This wasn't even used anywhere * Removed read_timeout and connect_timeout. Made a new option network timeout * Allow a URL to be pasted in the host box on the toolbar * Don't preserve the setuid or setgid attributes for a transfered file (if set) * HTTP updates (from John Franks <john@math.northwestern.edu>) * Updates to USERS-GUIDE (from Steve Stites <stites@fastmail.ca>) * Fixed encodings for several po files (from Owen Taylor <otaylor@redhat.com>) * Polish updates (from pbs <pbs@linux.net.pl>) * Russian updates (from Valek Filippov <frob@df.ru>) * Bulgarian updates (from Borislav Aleksandrov <B.Aleksandrov@cnsys.bg> and Yanko Kaneti <yaneti@declera.com>) * Dutch updates (from Myckel Habets <myckelhabets@netscape.net>) *CORRECTED* * French updates (from Jerome COUDERC <j.couderc@ifrance.com>) * Polish updates (from Arkadiusz Lipiec <alipiec@adrenalina.pl>) * German updates (from Bernd Leibing <Bernd.Leibing@rz.uni-ulm.de>) Changes from 2.0.11 to 2.0.12 * Fixed several memory leaks * HTTP proxy fixups * Fixed bug with throttling of connections not working in some cases * Fixed wrong time remaining for interrupted transfers * Added option to only show selected files * Cleanups to cache * Fixed crash in view file * Fixed crash in toolbar * Updates to Compare Windows feature * Fixed SSH/SSH2 connection problem on IRIX * Password is no longer shown in the log window for HTTP protocol * Added Bulgarian translation (from Borislav Aleksandrov <B.Aleksandrov@cnsys.bg>) * Norwegian updates (from Anders Henriksen <andersh@cc.uit.no>) Changes from 2.0.10 to 2.0.11 * Fixed delete crash * Fixed problem with SSHV2 not showing directories with more than 100 files * Fixed several memory leaks * Enabled cache for SSH/SSH2 * Fixed stalled SSH transfers (~ escape sequences) * Spanish updates (from Gustavo D. Vranjes <gvranjes@abaconet.com.ar>) * Small German translation fixes (from Bernd Leibing <Bernd.Leibing@rz.uni-ulm.de> and Reinhold Trocker <reinhold.trocker@dnet.it>) * Updated deb.xpm (from Robert Millan <zeratul2@wanadoo.es>) Changes from 2.0.9 to 2.0.10 * Added option to SSH/SSH2 to not require a username/password * Added option to SSH2 to where it can log in using the SFTP subsys * Added option to SSH/SSH2 to use the ssh-askpass utility to grab the users password * Fixed bug in SSH2 login failure if the user specified a port * Fixed bug in SSH2 connections that wouldn't set default remote directory * Fixed crash in SSH2 transfers after some file transfers * Fixed bug in options dialog with FTP proxy config not saving properly * Fixed bug where you could add a bookmark with two or more /'s in a row * Fixed problem with est. time remaining and KB/s being wrong if you resumed a file transfer * Added icon to gftp window (can be seen in gnome task panel applet or when cycling through windows) * Various fixes to stop button * Upgraded included gettext to 0.10.40 * Chinese zh_CN.GB2312 updates (from homebody@263.net) * French updates (from Jerome COUDERC <j.couderc@ifrance.com>) * Spanish updates (from Gustavo D. Vranjes <gvranjes@abaconet.com.ar>) * Norwegian updates (from Anders Henriksen <andersh@cc.uit.no>) Changes from 2.0.9pre3 to 2.0.9 * Improved login sequence for both SSH implementations * Remove *'s and /'s after some files when connecting to a remote server running the commercial SSH2 server * Fixed delete bug I introduced in 2.0.9pre3 * Added Perl script to copy your ~/.netrc file into gftp's bookmark file * Made text port so that it'll always resume the file transfer * Japanese updates (from Yasuyuki Furukawa <yasu@on.cs.keio.ac.jp>) * Danish updates (from Birger Langkjer <birger.langkjer@image.dk>) * Korean updates (from Nam SungHyun <namsh@lge.com>) * Turkish updates (from Gorkem Cetin <gorkem@gelecek.com.tr>) * Spanish updates (from Gustavo D. Vranjes <gvranjes@abaconet.com.ar>) * Added Norwegian translation (from Anders Henriksen <andersh@cc.uit.no>) Changes from 2.0.9pre2 to 2.0.9pre3 * Added option to specify default protocol * Fixed bug in stopping of file transfers * Fixed bug in text port KB/s being wrong * Fixed bug with time being wrong for daylight savings time * Made it so you couldn't delete . or .. * Fixed crash in SSHV2 transfers * Trim whitespace when parsing URLs * Fixed estimated time left being wrong when transferring lots of small files * Set window class for all dialogs (from Andy Piper <andy.piper@freeuk.com>) * Spanish updates (from Gustavo D. Vranjes <gvranjes@abaconet.com.ar>) Changes from 2.0.9pre1 to 2.0.9pre2 * Fixed bug in double clicking not working in file listbox in gtk+ 1.2 port Changes from 2.0.8 to 2.0.9pre1 * Added support for sshv2 file transfers * Added support for gtk+ >= 1.3.8 (add --enable-gtk20 to configure) * Added option whether to add new file transfers onto existing ones or new ones * Added option to limit the size of the log window for better performance * Added option to be able to specify additional arguments to ssh * Added options to change color of log messages in gtk+ port (not changeable in GUI yet) * Cleaned up options dialog * Fixed preserving file permissions on transfered files * Fixed crash on Solaris (probably on others as well) that would occur after a finished file transfer * Added readline support to text port * Fixed build problems on FreeBSD * Updated Spanish translation * Other small bug fixes Changes from 2.0.8pre4 to 2.0.8 * Fixed progress update bug when downloading files * Other small bug fixes * Updated French and Czech translation Changes from 2.0.8pre3 to 2.0.8pre4 * Fixed bug with gftp sometimes "freezing" up when you would have it do several things at once * Moved the displaying of the KB/s from the current KB/s back to the average KB/s for the file transfer * Fixed bug with current file numbers not being updated * Fixed bug where gftp would reconnect to a site after a file upload * Fixed bug where the cache wasn't being updated when you refreshed a directory listing * Fixed bug where you couldn't select overwrite, resume or skip when transfering files that already existed * Made it so that the text port doesn't require the XPM files to be present when the config file is read * Renamed gtk12 port from gftp-gtk12 to gftp-gtk. I'll work gtk+ 2.0 port in the same source with #ifdefs * Other small bug fixes * Added Turkish translation Changes from 2.0.8pre2 to 2.0.8pre3 * Fixed some downloading/uploading problems and also fixed some reconnecting problems * Fixed bug so that you can do other stuff while a file transfer is in progress * Fixed crash that would occur if you would enter a blank host in the toolbar * Fixed compile problem on Solaris 7 * Drag and Drop fixups * Quite a few other small bug fixes * Updated French and Russian translation Changes from 2.0.8pre1 to 2.0.8pre2 * Fixed crash in bookmarks * Added some more bookmarks * Fixed crash with viewing files * Fixed compile problem with operating systems that don't have getaddrinfo(3) * Fixed bug with dragging a local file * Fixed bug with file transfer timeout * Removed unused variables from some structures * Added overwrite by default option * Fixed bug with keypad delete only letting you deleting one file * Fixed bug with command line params not being passed from the gftp shell script to gftp-gtk12 and gftp-text * Updated Korean translation Changes from 2.0.7b to 2.0.8pre1 * Separated all UI related functions from the non-UI related functions. Now have text port along with gtk+ 1.2 port * Fixed format string security problem in logging of ftp and http responses * Made chdir, rm, chmod, rename, etc all threaded operations. Now all network operations done in gftp should be stopable from the gui interface * Improved net core so it should detect better if the remote connection closed * When you go to upload a file now via ftp, it'll no longer send a SIZE command for each file. It can also now detect files that exist in subdirs and prompt you about those as well * Fixed file corruption when files were transfered via ascii mode * Added recursive directory deletes * Can now reorder files that are being transfered * If a file transfer is already going to one host, when you select more files to transfer they will automatically be appended to the current transfer in progress instead of another transfer being made * Added simplified Chinese and Italian translation * Various other small bug fixes Changes from 2.0.7a to 2.0.7b * Fixed crash that would occur in the toolbar * Fixed problem with display becoming frozen after file transfer is done until an X event occured * Fixed problem with bandwidth throttling not working * Fixed problem with file transfers not timing out properly Changes from 2.0.7 to 2.0.7a * Fixed problem with resume/skip/overwrite no working * Fixed crash that would occur when you would stop a transfer * Fixed problem with wrong selection being returned when filespec was anything other than * * Updated Portuguese (pt_BR) and Russian (ru) translation Changes from 2.0.6a to 2.0.7 * HTTP Protocol fixups. It now supports resuming file transfers, and has an improved HTTP parsing engine * Added support for transfering files via the SSH protocol. See the FAQ for details about how to do this * Added FXP support * Added read and write timeouts on the file transfers. This will make gftp be able to start file transfers again if you have an unstable internet connection * Doesn't peg the CPU load when connecting or getting directory listings * Fixed problem with reading from control connection on SunOS and Digital UNIX * Configure script will now detect pthreads library properly on Digital UNIX and FreeBSD * Added Czech, Portuguese, and Russian translation * Menu items now grey out on the local, remote and tools menus for the items that are not valid * Lots of new icons * Finished internal code cleanup I started back in version 2.0.6 * Other small bug fixes and enhancements Changes from 2.0.6 to 2.0.6a * Fixed crash that would occur in the history of the hostname * Fixed problem with if you would hit the stop button, it would keep trying to connect to that old host even if you entered a new hostname * Updated Polish and Danish translation Changes from 2.0.5a to 2.0.6 * Redesigned the transfer window. Now, it is tree based, and you can see all the individual files that are to be transfered. Displays more informative information like estimated time remaining for the individual file, and estimated time remaining for all the files in that group. * Added Chinese, Danish, Dutch, Finnish, Polish, Portuguese, Spanish, and Swedish translation * Updated all translation files * You can now log into a http proxy with a username and password. * When resizing gFTP to much larger sizes, the toolbar resizes better * If you have save geometry set, gFTP will remember the column widths of the local and remote listboxes * Added history to the hostname, port and username fields of the toolbar * If you have preserve permissions set, then gFTP will save the date of the downloaded files (it will also still save the file permissions as well too like it used to) * Now transfers the lists of subdirectories more efficiently * Fixed crash that would occur when you would connect or delete files (only reported on Sparc) * Bookmarks are now stored in ~/.gftp/bookmarks. You can now associate a local directory with a bookmark. (Note: gFTP will automagically convert your bookmarks to the new format for you). * Made protocols more modular. Added full support for http protocol. This will now make it much easier to add support for more protocols in the near future (like DAV support) * Removed the Use proxy option under the FTP menu and in the bookmarks. You can now set up what hosts are on your local network subnet * Improved USERS-GUIDE * Many other small enhancements and lots of code cleanup Changes from 2.0.5 to 2.0.5a * Fixed problem with gFTP forgetting your passwords * When you drag a file from gFTP, it will not send the password over * When you drop a file to gFTP, if there is no password, it will prompt you for one * Added Japanese and partian Korean translation and Unicode fixes * Fixed French and German translations. I didn't mark some strings with N_( and some strings got commented out * Fixed file handle leak in transfer of files (yikes!) Changes from 2.0.4 to 2.0.5 * Added gettext support. A French and German tranlsation is included with this version. If you would like to do a translation of gFTP, please email me first just to make sure someone else isn't already doing one. * If you right click on the log window, or in the edit bookmarks dialog, it will bring up a menu. * Added bandwidth throttling * Fixed problem with stopping file transfers * Fixed problem with Use Proxy under the FTP menu not working properly with a http proxy * Fixed problem with some file transfers not completing properly * Fixed problem with remote editing of files sometimes not working * Added manpage, gftp(1) * Makefiles are now generated by automake * Other small bug fixes and enhancements Changes from 2.0.3 to 2.0.4 * Removed all of the old ftp proxy code and added scripting to log into your firewall. This makes it possible to log into ftp proxies not previously supported * When transfering a file, if the remote site disconnects, gFTP can automatically resume the transfer of the file where it last left off. The maximum times that it will do this is the number you have your connect retries set to. * Fixed problem with auto-retry on connect. * When downloading files, fixed problem with sometimes interpreting file size wrong from ftp server. * The return and delete keys now work again in the listboxes. * Added option to send SITE command. * Passwords can now not be saved in the config file. When you try to connect to a bookmark that doesn't have a password set, it will prompt you to enter a password * When you add a new Bookmark, it will not save your password. If you want your password to be stored in the config file automatically, you must go to edit bookmarks, and edit that bookmark entry and add it there * When you edit a remote file, it will now ask if you want to upload the new file to the remote server * If you right click on the local or remote listboxes, it will bring up a menu with the items in the Local and Remote menu. * Will now interpret UNIX and Mac style filenames that have spaces in them correctly * Fixed problem that if your view/edit program had arguments with it, the program would not execute (ex: xterm -e vi) * Changed behavior of the OpenURL button. Here is what will happen when you click on the OpenURL button. If you are connected to a site, it will disconnect from the site. If you aren't connected to a site, and you have a hostname entered on the toolbar, it will connect to that host. Otherwise it will bring up the OpenURL dialog * Various other small bug fixes Changes from 2.0.2 to 2.0.3 * Many bug fixes. I should have all known bugs fixed * Now parses some NT, MacOS, and Novell ftp servers output * Added support for logging in with the ACCOUNT command * Added a users guide for newbies. See USERS-GUIDE * You can now disable some columns in the local and remote listboxes in the config file. You can also set the columns to auto-resizing * Added debian/ directory to main distribution Changes from 2.0.1 to 2.0.2 * Removed Use same connection option. Now when you download a file, the remote window automagically becomes cached, and the file transfer will use the same connection. It will only open a second connection when it has to. * Added support to be able to drag urls from Netscape to the Open URL button on the toolbar. Also cleaned up the drag and drop code. * Added drop down history box on the local and remote directory entry widget * HTTP Proxy fixups to make it work with squid-2.2.STABLE3. Please email me about how this works/doesn't work with other http proxies. * Added option to show hidden files * Several bookmarks bug fixes * Various other small bug fixes * Added .spec file to main distribution Changes from 2.0.0 to 2.0.1 * Main screen is now more responsive during downloads * Various small bug fixes Changes from 1.13 to 2.0.0 * Added toolbar with stop button * Removed connection manager and added Bookmarks menu * Added tree based bookmark editor * Added option to preserve file permissions of transfered files * Added option to use the same connection for downloads * Added auto-retry option. If you set the number of retries to 0, it will keep trying until you either stop it or it logs in * Removed read() and write() timeouts * Fixed problem only allowing you to log in on port 21 * Fixed problem with recursively getting remote directories and files * HTTP proxy fixups * Many other small bug fixes and enhancements * Note to users upgrading from a previous version: there are a few config file changes: * If you are using a http proxy, set your use_proxy type in the config file to type 100. * Since gFTP uses a bookmarks menu now, you will have to change your host= lines. A line in the old config file will have: host=Debian Sites:Debian:ftp.debian.org:21:/debian:anonymous:@EMAIL@:1 You will have to change it to something like: host=Debian Sites/Debian:ftp.debian.org:21:/debian:anonymous:@EMAIL@:1 The first column is the menu path. You can have Menu/Submenu/Submenu/Debian in order to nest items into submenus. Changes from 1.12 to 1.13 * Added graphical configuration * Uses a lot less memory * Separated all ftp code into gnome-ftp library * Now prompts the user to reconnect on connect error * Added much more efficient transfer dialog for when the files exist * Added local and remote chmod support * Added support for HTTP proxies * Added another FTP proxy type * Added support for EPLF directory listings * Now uses a configure script to generate the makefile * Added Save Password feature in the connection manager * Added more keyboard shortcuts * Various bug fixes * Improved internal design Changes from 1.11 to 1.12 * Added the ability to edit local and remote files * Added the ability to associate with a file extension a file viewer and the default download type (ASCII or BINARY). * Added anti-idle tool. Please do not abuse this feature * Better remote symlink handling * Removed some icons from the distribution * Added another FTP proxy type * Several small enhancements Changes from 1.1 to 1.11 * Fixed some problems connecting to some ftp servers * Fixed resume transfer problems * Fixed some ftp proxy login problems * Fixed problems with gFTP sometimes crashing Changes from 1.0 to 1.1 * Added FTP proxy server support * Added ability to download entire directories and their subdirectories * Added non-passive file transfers (using PORT command) * Added ability to restrict files in the listboxes to a particular filemask * Added geometry management. gFTP can automatically save the geometry of it's widgets for next time you start it back up. * Added more config file options. Most can be set within gFTP itself * Several small dialog enhancements * Fixed problems with connecting to Serv-U FTP Servers * Fixed date sorting problem * Fixed problem with gFTP trying to view some remote dirs when they were double clicked * Fixed problem with gFTP sometimes crashing after some file transfers Changes from 0.21 to 1.0 * Drag-N-Drop support added * Added caching of remote directory listings. The cache will automatically be cleared when gFTP exits. * You can now tell gFTP to only transfer one file at a time. When one transfer finishes the next one starts. You can still have multiple transfers going at the same time * Added ability to view files. Also, when you double click on a file in the listboxes it will view that file. If you double click a directory, it will still change to it. * Added Open URL menu item under the Remote menu * Several connection manager enhancements * Several bug fixes and code improvements * Added a few more default sites to the config file Changes from 0.2 to 0.21 * Added Compare Windows feature. It will select the files in both windows * make install will now copy some necessary XPM and config files to /usr/local/share/gftp. When a new user first runs gftp, it will copy the config file from there to their home directory and add their email address to the config file. * Fixed some disconnect problems when the socket would close prematuraly * Changed all occurances of snprintf, vsnprintf, and sys_errlist to g_snprintf, g_vsnprintf, and g_strerror respectively. Should now compile cleanly on most platforms. * Fixed ItemFactory callbacks. Should now work fine on 64bit machines. * Added a few more icons to the distribution for the file listboxes. Changes from 0.1 to 0.2 * Completely rewritten in gtk instead of Motif * Fixed problems with parsing of some directory listings * Fixed problems with reading responses from certain FTP servers * Supports connecting to a FTP server via command line parameters You can now type: gftp user:pass@ftp-site:port/directory. You don't have to specify all of the options, like user:pass, port and directory. * More informative error messages * Sorting capabilites in the listboxes * Colorized text in the log window * Allows saving the text in the log window to a file * Added disconnect from ftp server * Various code cleanups * Removed about dialog box