annotate ppc/dsputil_ppc.h @ 10311:943b63f364ca libavcodec

Make sure all the bits are written to output in fax data decoder. This fixes decoding TIFF images with fax compression and width being not multiple of eight (and issue 1429).

/*
 * Copyright (c) 2003-2004 Romain Dolbeau <[e-mail]>
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

#ifndef AVCODEC_PPC_DSPUTIL_PPC_H
#define AVCODEC_PPC_DSPUTIL_PPC_H

#include "config.h"

#if CONFIG_POWERPC_PERF
void powerpc_display_perf_report(void);
/* the 604* have 2, the G3* have 4, the G4s have 6,
   and the G5 are completely different (they MUST use
   ARCH_PPC64, and let's hope all future 64 bis PPC
   will use the same PMCs... */
#define POWERPC_NUM_PMC_ENABLED 6
/* if you add to the enum below, also add to the perfname array
   in dsputil_ppc.c */
enum powerpc_perf_index {
    altivec_fft_num = 0,
    altivec_gmc1_num,
    altivec_dct_unquantize_h263_num,
    altivec_fdct,
    altivec_idct_add_num,
    altivec_idct_put_num,
    altivec_put_pixels16_num,
    altivec_avg_pixels16_num,
    altivec_avg_pixels8_num,
    altivec_put_pixels8_xy2_num,
    altivec_put_no_rnd_pixels8_xy2_num,
    altivec_put_pixels16_xy2_num,
    altivec_put_no_rnd_pixels16_xy2_num,
    altivec_hadamard8_diff8x8_num,
    altivec_hadamard8_diff16_num,
    altivec_avg_pixels8_xy2_num,
    powerpc_clear_blocks_dcbz32,
    powerpc_clear_blocks_dcbz128,
    altivec_put_h264_chroma_mc8_num,
    altivec_avg_h264_chroma_mc8_num,
    altivec_put_h264_qpel16_h_lowpass_num,
    altivec_avg_h264_qpel16_h_lowpass_num,
    altivec_put_h264_qpel16_v_lowpass_num,
    altivec_avg_h264_qpel16_v_lowpass_num,
    altivec_put_h264_qpel16_hv_lowpass_num,
    altivec_avg_h264_qpel16_hv_lowpass_num,
    powerpc_perf_total
};
enum powerpc_data_index {
    powerpc_data_min = 0,
    powerpc_data_max,
    powerpc_data_sum,
    powerpc_data_num,
    powerpc_data_total
};
extern unsigned long long perfdata[POWERPC_NUM_PMC_ENABLED][powerpc_perf_total][powerpc_data_total];

#if !ARCH_PPC64
#define POWERP_PMC_DATATYPE unsigned long
#define POWERPC_GET_PMC1(a) __asm__ volatile("mfspr %0, 937" : "=r" (a))
#define POWERPC_GET_PMC2(a) __asm__ volatile("mfspr %0, 938" : "=r" (a))
#if (POWERPC_NUM_PMC_ENABLED > 2)
#define POWERPC_GET_PMC3(a) __asm__ volatile("mfspr %0, 941" : "=r" (a))
#define POWERPC_GET_PMC4(a) __asm__ volatile("mfspr %0, 942" : "=r" (a))
#else
#define POWERPC_GET_PMC3(a) do {} while (0)
#define POWERPC_GET_PMC4(a) do {} while (0)
#endif
#if (POWERPC_NUM_PMC_ENABLED > 4)
#define POWERPC_GET_PMC5(a) __asm__ volatile("mfspr %0, 929" : "=r" (a))
#define POWERPC_GET_PMC6(a) __asm__ volatile("mfspr %0, 930" : "=r" (a))
#else
#define POWERPC_GET_PMC5(a) do {} while (0)
#define POWERPC_GET_PMC6(a) do {} while (0)
#endif
#else /* ARCH_PPC64 */
#define POWERP_PMC_DATATYPE unsigned long long
#define POWERPC_GET_PMC1(a) __asm__ volatile("mfspr %0, 771" : "=r" (a))
#define POWERPC_GET_PMC2(a) __asm__ volatile("mfspr %0, 772" : "=r" (a))
#if (POWERPC_NUM_PMC_ENABLED > 2)
#define POWERPC_GET_PMC3(a) __asm__ volatile("mfspr %0, 773" : "=r" (a))
#define POWERPC_GET_PMC4(a) __asm__ volatile("mfspr %0, 774" : "=r" (a))
#else
#define POWERPC_GET_PMC3(a) do {} while (0)
#define POWERPC_GET_PMC4(a) do {} while (0)
#endif
#if (POWERPC_NUM_PMC_ENABLED > 4)
#define POWERPC_GET_PMC5(a) __asm__ volatile("mfspr %0, 775" : "=r" (a))
#define POWERPC_GET_PMC6(a) __asm__ volatile("mfspr %0, 776" : "=r" (a))
#else
#define POWERPC_GET_PMC5(a) do {} while (0)
#define POWERPC_GET_PMC6(a) do {} while (0)
#endif
#endif /* ARCH_PPC64 */
#define POWERPC_PERF_DECLARE(a, cond)       \
    POWERP_PMC_DATATYPE                     \
        pmc_start[POWERPC_NUM_PMC_ENABLED], \
        pmc_stop[POWERPC_NUM_PMC_ENABLED],  \
        pmc_loop_index;
#define POWERPC_PERF_START_COUNT(a, cond) do { \
    POWERPC_GET_PMC6(pmc_start[5]); \
    POWERPC_GET_PMC5(pmc_start[4]); \
    POWERPC_GET_PMC4(pmc_start[3]); \
    POWERPC_GET_PMC3(pmc_start[2]); \
    POWERPC_GET_PMC2(pmc_start[1]); \
    POWERPC_GET_PMC1(pmc_start[0]); \
    } while (0)
#define POWERPC_PERF_STOP_COUNT(a, cond) do { \
    POWERPC_GET_PMC1(pmc_stop[0]);            \
    POWERPC_GET_PMC2(pmc_stop[1]);            \
    POWERPC_GET_PMC3(pmc_stop[2]);            \
    POWERPC_GET_PMC4(pmc_stop[3]);            \
    POWERPC_GET_PMC5(pmc_stop[4]);            \
    POWERPC_GET_PMC6(pmc_stop[5]);            \
    if (cond) {                               \
        for(pmc_loop_index = 0;               \
            pmc_loop_index < POWERPC_NUM_PMC_ENABLED; \
            pmc_loop_index++) {               \
            if (pmc_stop[pmc_loop_index] >= pmc_start[pmc_loop_index]) {  \
                POWERP_PMC_DATATYPE diff =                                \
                  pmc_stop[pmc_loop_index] - pmc_start[pmc_loop_index];   \
                if (diff < perfdata[pmc_loop_index][a][powerpc_data_min]) \
                    perfdata[pmc_loop_index][a][powerpc_data_min] = diff; \
                if (diff > perfdata[pmc_loop_index][a][powerpc_data_max]) \
                    perfdata[pmc_loop_index][a][powerpc_data_max] = diff; \
                perfdata[pmc_loop_index][a][powerpc_data_sum] += diff;    \
                perfdata[pmc_loop_index][a][powerpc_data_num] ++;         \
            }                                 \
        }                                     \
    }                                         \
} while (0)
#else /* CONFIG_POWERPC_PERF */
// those are needed to avoid empty statements.
#define POWERPC_PERF_DECLARE(a, cond)        int altivec_placeholder __attribute__ ((unused))
#define POWERPC_PERF_START_COUNT(a, cond)    do {} while (0)
#define POWERPC_PERF_STOP_COUNT(a, cond)     do {} while (0)
#endif /* CONFIG_POWERPC_PERF */

#endif /*  AVCODEC_PPC_DSPUTIL_PPC_H */