view pixdesc.h @ 9815:0f281bed6d7b libavcodec

vc1 and wmv3 decoders use MPV_frame_start which uses get_buffer, set CODEC_CAP_DR1

/*
 * pixel format descriptor
 * Copyright (c) 2009 Michael Niedermayer <[e-mail]>
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

#ifndef AVCODEC_PIXDESC_H
#define AVCODEC_PIXDESC_H

#include <inttypes.h>

#include "libavutil/intreadwrite.h"

typedef struct AVComponentDescriptor{
    uint16_t plane        :2;            ///< which of the 4 planes contains the component

    /**
     * Number of elements between 2 horizontally consecutive pixels minus 1.
     * Elements are bits for bitstream formats, bytes otherwise.
     */
    uint16_t step_minus1  :3;

    /**
     * Number of elements before the component of the first pixel plus 1.
     * Elements are bits for bitstream formats, bytes otherwise.
     */
    uint16_t offset_plus1 :3;
    uint16_t shift        :3;            ///< number of least significant bits that must be shifted away to get the value
    uint16_t depth_minus1 :4;            ///< number of bits in the component minus 1
}AVComponentDescriptor;

/**
 * Descriptor that unambiguously describes how the bits of a pixel are
 * stored in the up to 4 data planes of an image. It also stores the
 * subsampling factors and number of components.
 *
 * @note This is separate of the colorspace (RGB, YCbCr, YPbPr, JPEG-style YUV
 *       and all the YUV variants) AVPixFmtDescriptor just stores how values
 *       are stored not what these values represent.
 */
typedef struct AVPixFmtDescriptor{
    const char *name;
    uint8_t nb_channels;        ///< The number of components each pixel has, (1-4)

    /**
     * Amount to shift the luma width right to find the chroma width.
     * For YV12 this is 1 for example.
     * chroma_width = -((-luma_width) >> log2_chroma_w)
     * The note above is needed to ensure rounding up.
     */
    uint8_t log2_chroma_w;      ///< chroma_width = -((-luma_width )>>log2_chroma_w)

    /**
     * Amount to shift the luma height right to find the chroma height.
     * For YV12 this is 1 for example.
     * chroma_height= -((-luma_height) >> log2_chroma_h)
     * The note above is needed to ensure rounding up.
     */
    uint8_t log2_chroma_h;
    uint8_t flags;
    AVComponentDescriptor comp[4]; ///< parameters that describe how pixels are packed
}AVPixFmtDescriptor;

#define PIX_FMT_BE        1 ///< big-endian
#define PIX_FMT_PAL       2 ///< Pixel format has a palette in data[1], values are indexes in this palette.
#define PIX_FMT_BITSTREAM 4 ///< All values of a component are bit-wise packed end to end.

/**
 * The array of all the pixel format descriptors.
 */
extern const AVPixFmtDescriptor av_pix_fmt_descriptors[];

/**
 * Reads a line from an image, and writes to \p dst the values of the
 * pixel format component \p c.
 *
 * @param data the array containing the pointers to the planes of the image
 * @param linesizes the array containing the linesizes of the image
 * @param desc the pixel format descriptor for the image
 * @param x the horizontal coordinate of the first pixel to read
 * @param y the vertical coordinate of the first pixel to read
 * @param w the width of the line to read, that is the number of
 * values to write to \p dst
 * @param read_pal_component if not zero and the format is a paletted
 * format writes to \p dst the values corresponding to the palette
 * component \p c in data[1], rather than the palette indexes in
 * data[0]. The behavior is undefined if the format is not paletted.
 */
static inline void read_line(uint16_t *dst, const uint8_t *data[4], const int linesize[4],
                             const AVPixFmtDescriptor *desc, int x, int y, int c, int w, int read_pal_component)
{
    AVComponentDescriptor comp= desc->comp[c];
    int plane= comp.plane;
    int depth= comp.depth_minus1+1;
    int mask = (1<<depth)-1;
    int shift= comp.shift;
    int step = comp.step_minus1+1;
    int flags= desc->flags;

    if (flags & PIX_FMT_BITSTREAM){
        int skip = x*step + comp.offset_plus1-1;
        const uint8_t *p = data[plane] + y*linesize[plane] + (skip>>3);
        int shift = 8 - depth - (skip&7);

        while(w--){
            int val = (*p >> shift) & mask;
            if(read_pal_component)
                val= data[1][4*val + c];
            shift -= step;
            p -= shift>>3;
            shift &= 7;
            *dst++= val;
        }
    } else {
        const uint8_t *p = data[plane]+ y*linesize[plane] + x*step + comp.offset_plus1-1;

        while(w--){
            int val;
            if(flags & PIX_FMT_BE) val= AV_RB16(p);
            else                   val= AV_RL16(p);
            val = (val>>shift) & mask;
            if(read_pal_component)
                val= data[1][4*val + c];
            p+= step;
            *dst++= val;
        }
    }
}

/**
 * Writes the values from src to the pixel format component c of an
 * image line.
 *
 * @param src array containing the values to write
 * @param data the array containing the pointers to the planes of the
 * image to write into. It is supposed to be zeroed.
 * @param linesizes the array containing the linesizes of the image
 * @param desc the pixel format descriptor for the image
 * @param x the horizontal coordinate of the first pixel to write
 * @param y the vertical coordinate of the first pixel to write
 * @param w the width of the line to write, that is the number of
 * values to write to the image line
 */
static inline void write_line(const uint16_t *src, uint8_t *data[4], const int linesize[4],
                              const AVPixFmtDescriptor *desc, int x, int y, int c, int w)
{
    AVComponentDescriptor comp = desc->comp[c];
    int plane = comp.plane;
    int depth = comp.depth_minus1+1;
    int step  = comp.step_minus1+1;
    int flags = desc->flags;

    if (flags & PIX_FMT_BITSTREAM) {
        int skip = x*step + comp.offset_plus1-1;
        uint8_t *p = data[plane] + y*linesize[plane] + (skip>>3);
        int shift = 8 - depth - (skip&7);

        while (w--) {
            *p |= *src++ << shift;
            shift -= step;
            p -= shift>>3;
            shift &= 7;
        }
    } else {
        int shift = comp.shift;
        uint8_t *p = data[plane]+ y*linesize[plane] + x*step + comp.offset_plus1-1;

        while (w--) {
            if (flags & PIX_FMT_BE) {
                uint16_t val = AV_RB16(p) | (*src++<<shift);
                AV_WB16(p, val);
            } else {
                uint16_t val = AV_RL16(p) | (*src++<<shift);
                AV_WL16(p, val);
            }
            p+= step;
        }
    }
}

/**
 * Returns the number of bits per pixel used by the pixel format
 * described by pixdesc.
 *
 * The returned number of bits refers to the number of bits actually
 * used for storing the pixel information, that is padding bits are
 * not counted.
 */
int av_get_bits_per_pixel(const AVPixFmtDescriptor *pixdesc);

#endif /* AVCODEC_PIXDESC_H */