Mercurial > libavcodec.hg
view jfdctfst.c @ 9257:58229095edae libavcodec
Move adding the '-test$(EXESUF)' suffix to test programs into common.mak.
author | diego |
---|---|
date | Wed, 25 Mar 2009 18:19:20 +0000 |
parents | e9d9d946f213 |
children | f522171a5d3d |
line wrap: on
line source
/* * jfdctfst.c * * This file is part of the Independent JPEG Group's software. * * The authors make NO WARRANTY or representation, either express or implied, * with respect to this software, its quality, accuracy, merchantability, or * fitness for a particular purpose. This software is provided "AS IS", and * you, its user, assume the entire risk as to its quality and accuracy. * * This software is copyright (C) 1994-1996, Thomas G. Lane. * All Rights Reserved except as specified below. * * Permission is hereby granted to use, copy, modify, and distribute this * software (or portions thereof) for any purpose, without fee, subject to * these conditions: * (1) If any part of the source code for this software is distributed, then * this README file must be included, with this copyright and no-warranty * notice unaltered; and any additions, deletions, or changes to the original * files must be clearly indicated in accompanying documentation. * (2) If only executable code is distributed, then the accompanying * documentation must state that "this software is based in part on the work * of the Independent JPEG Group". * (3) Permission for use of this software is granted only if the user accepts * full responsibility for any undesirable consequences; the authors accept * NO LIABILITY for damages of any kind. * * These conditions apply to any software derived from or based on the IJG * code, not just to the unmodified library. If you use our work, you ought * to acknowledge us. * * Permission is NOT granted for the use of any IJG author's name or company * name in advertising or publicity relating to this software or products * derived from it. This software may be referred to only as "the Independent * JPEG Group's software". * * We specifically permit and encourage the use of this software as the basis * of commercial products, provided that all warranty or liability claims are * assumed by the product vendor. * * This file contains a fast, not so accurate integer implementation of the * forward DCT (Discrete Cosine Transform). * * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT * on each column. Direct algorithms are also available, but they are * much more complex and seem not to be any faster when reduced to code. * * This implementation is based on Arai, Agui, and Nakajima's algorithm for * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in * Japanese, but the algorithm is described in the Pennebaker & Mitchell * JPEG textbook (see REFERENCES section in file README). The following code * is based directly on figure 4-8 in P&M. * While an 8-point DCT cannot be done in less than 11 multiplies, it is * possible to arrange the computation so that many of the multiplies are * simple scalings of the final outputs. These multiplies can then be * folded into the multiplications or divisions by the JPEG quantization * table entries. The AA&N method leaves only 5 multiplies and 29 adds * to be done in the DCT itself. * The primary disadvantage of this method is that with fixed-point math, * accuracy is lost due to imprecise representation of the scaled * quantization values. The smaller the quantization table entry, the less * precise the scaled value, so this implementation does worse with high- * quality-setting files than with low-quality ones. */ /** * @file libavcodec/jfdctfst.c * Independent JPEG Group's fast AAN dct. */ #include <stdlib.h> #include <stdio.h> #include "libavutil/common.h" #include "dsputil.h" #define DCTSIZE 8 #define GLOBAL(x) x #define RIGHT_SHIFT(x, n) ((x) >> (n)) #define SHIFT_TEMPS /* * This module is specialized to the case DCTSIZE = 8. */ #if DCTSIZE != 8 Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ #endif /* Scaling decisions are generally the same as in the LL&M algorithm; * see jfdctint.c for more details. However, we choose to descale * (right shift) multiplication products as soon as they are formed, * rather than carrying additional fractional bits into subsequent additions. * This compromises accuracy slightly, but it lets us save a few shifts. * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) * everywhere except in the multiplications proper; this saves a good deal * of work on 16-bit-int machines. * * Again to save a few shifts, the intermediate results between pass 1 and * pass 2 are not upscaled, but are represented only to integral precision. * * A final compromise is to represent the multiplicative constants to only * 8 fractional bits, rather than 13. This saves some shifting work on some * machines, and may also reduce the cost of multiplication (since there * are fewer one-bits in the constants). */ #define CONST_BITS 8 /* Some C compilers fail to reduce "FIX(constant)" at compile time, thus * causing a lot of useless floating-point operations at run time. * To get around this we use the following pre-calculated constants. * If you change CONST_BITS you may want to add appropriate values. * (With a reasonable C compiler, you can just rely on the FIX() macro...) */ #if CONST_BITS == 8 #define FIX_0_382683433 ((int32_t) 98) /* FIX(0.382683433) */ #define FIX_0_541196100 ((int32_t) 139) /* FIX(0.541196100) */ #define FIX_0_707106781 ((int32_t) 181) /* FIX(0.707106781) */ #define FIX_1_306562965 ((int32_t) 334) /* FIX(1.306562965) */ #else #define FIX_0_382683433 FIX(0.382683433) #define FIX_0_541196100 FIX(0.541196100) #define FIX_0_707106781 FIX(0.707106781) #define FIX_1_306562965 FIX(1.306562965) #endif /* We can gain a little more speed, with a further compromise in accuracy, * by omitting the addition in a descaling shift. This yields an incorrectly * rounded result half the time... */ #ifndef USE_ACCURATE_ROUNDING #undef DESCALE #define DESCALE(x,n) RIGHT_SHIFT(x, n) #endif /* Multiply a DCTELEM variable by an int32_t constant, and immediately * descale to yield a DCTELEM result. */ #define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) static av_always_inline void row_fdct(DCTELEM * data){ int_fast16_t tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; int_fast16_t tmp10, tmp11, tmp12, tmp13; int_fast16_t z1, z2, z3, z4, z5, z11, z13; DCTELEM *dataptr; int ctr; SHIFT_TEMPS /* Pass 1: process rows. */ dataptr = data; for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { tmp0 = dataptr[0] + dataptr[7]; tmp7 = dataptr[0] - dataptr[7]; tmp1 = dataptr[1] + dataptr[6]; tmp6 = dataptr[1] - dataptr[6]; tmp2 = dataptr[2] + dataptr[5]; tmp5 = dataptr[2] - dataptr[5]; tmp3 = dataptr[3] + dataptr[4]; tmp4 = dataptr[3] - dataptr[4]; /* Even part */ tmp10 = tmp0 + tmp3; /* phase 2 */ tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; dataptr[0] = tmp10 + tmp11; /* phase 3 */ dataptr[4] = tmp10 - tmp11; z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ dataptr[2] = tmp13 + z1; /* phase 5 */ dataptr[6] = tmp13 - z1; /* Odd part */ tmp10 = tmp4 + tmp5; /* phase 2 */ tmp11 = tmp5 + tmp6; tmp12 = tmp6 + tmp7; /* The rotator is modified from fig 4-8 to avoid extra negations. */ z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ z11 = tmp7 + z3; /* phase 5 */ z13 = tmp7 - z3; dataptr[5] = z13 + z2; /* phase 6 */ dataptr[3] = z13 - z2; dataptr[1] = z11 + z4; dataptr[7] = z11 - z4; dataptr += DCTSIZE; /* advance pointer to next row */ } } /* * Perform the forward DCT on one block of samples. */ GLOBAL(void) fdct_ifast (DCTELEM * data) { int_fast16_t tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; int_fast16_t tmp10, tmp11, tmp12, tmp13; int_fast16_t z1, z2, z3, z4, z5, z11, z13; DCTELEM *dataptr; int ctr; SHIFT_TEMPS row_fdct(data); /* Pass 2: process columns. */ dataptr = data; for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; /* Even part */ tmp10 = tmp0 + tmp3; /* phase 2 */ tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ dataptr[DCTSIZE*4] = tmp10 - tmp11; z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ dataptr[DCTSIZE*6] = tmp13 - z1; /* Odd part */ tmp10 = tmp4 + tmp5; /* phase 2 */ tmp11 = tmp5 + tmp6; tmp12 = tmp6 + tmp7; /* The rotator is modified from fig 4-8 to avoid extra negations. */ z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ z11 = tmp7 + z3; /* phase 5 */ z13 = tmp7 - z3; dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ dataptr[DCTSIZE*3] = z13 - z2; dataptr[DCTSIZE*1] = z11 + z4; dataptr[DCTSIZE*7] = z11 - z4; dataptr++; /* advance pointer to next column */ } } /* * Perform the forward 2-4-8 DCT on one block of samples. */ GLOBAL(void) fdct_ifast248 (DCTELEM * data) { int_fast16_t tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; int_fast16_t tmp10, tmp11, tmp12, tmp13; int_fast16_t z1; DCTELEM *dataptr; int ctr; SHIFT_TEMPS row_fdct(data); /* Pass 2: process columns. */ dataptr = data; for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*1]; tmp1 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; tmp2 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5]; tmp3 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7]; tmp4 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*1]; tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; tmp6 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5]; tmp7 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7]; /* Even part */ tmp10 = tmp0 + tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; tmp13 = tmp0 - tmp3; dataptr[DCTSIZE*0] = tmp10 + tmp11; dataptr[DCTSIZE*4] = tmp10 - tmp11; z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); dataptr[DCTSIZE*2] = tmp13 + z1; dataptr[DCTSIZE*6] = tmp13 - z1; tmp10 = tmp4 + tmp7; tmp11 = tmp5 + tmp6; tmp12 = tmp5 - tmp6; tmp13 = tmp4 - tmp7; dataptr[DCTSIZE*1] = tmp10 + tmp11; dataptr[DCTSIZE*5] = tmp10 - tmp11; z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); dataptr[DCTSIZE*3] = tmp13 + z1; dataptr[DCTSIZE*7] = tmp13 - z1; dataptr++; /* advance pointer to next column */ } } #undef GLOBAL #undef CONST_BITS #undef DESCALE #undef FIX_0_541196100 #undef FIX_1_306562965