view ppc/dsputil_ppc.h @ 2497:69adfbbdcdeb libavcodec

- samples from mplayer ftp in the "adv" profile seem to have profile=2, which isn't the advanced one; and indeed, using adv. profile parser fails. Using normal parser works, and that's what is done - attempt at taking care of stride for NORM2 bitplane decoding - duplication of much code from msmpeg4.c; this code isn't yet used, but goes down as far as the block layer (mainly Transform Type stuff, the remains are wild editing without checking). Unusable yet, and lacks the AC decoding (but a step further in bitstream parsing) patch by anonymous

/*
 * Copyright (c) 2003-2004 Romain Dolbeau <[e-mail]>
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#ifndef _DSPUTIL_PPC_
#define _DSPUTIL_PPC_

#ifdef CONFIG_DARWIN
/* The Apple assembler shipped w/ gcc-3.3 knows about DCBZL, previous assemblers don't
   We assume here that the Darwin GCC is from Apple.... */
#if (__GNUC__ * 100 + __GNUC_MINOR__ < 303)
#define NO_DCBZL
#endif
#else /* CONFIG_DARWIN */
/* I don't think any non-Apple assembler knows about DCBZL */
#define NO_DCBZL
#endif /* CONFIG_DARWIN */

#ifdef POWERPC_PERFORMANCE_REPORT
void powerpc_display_perf_report(void);
/* the 604* have 2, the G3* have 4, the G4s have 6,
   and the G5 are completely different (they MUST use
   POWERPC_MODE_64BITS, and let's hope all future 64 bis PPC
   will use the same PMCs... */
#define POWERPC_NUM_PMC_ENABLED 6
/* if you add to the enum below, also add to the perfname array
   in dsputil_ppc.c */
enum powerpc_perf_index {
  altivec_fft_num = 0,
  altivec_gmc1_num,
  altivec_dct_unquantize_h263_num,
  altivec_fdct,
  altivec_idct_add_num,
  altivec_idct_put_num,
  altivec_put_pixels16_num,
  altivec_avg_pixels16_num,
  altivec_avg_pixels8_num,
  altivec_put_pixels8_xy2_num,
  altivec_put_no_rnd_pixels8_xy2_num,
  altivec_put_pixels16_xy2_num,
  altivec_put_no_rnd_pixels16_xy2_num,
  altivec_hadamard8_diff8x8_num,
  altivec_hadamard8_diff16_num,
  altivec_avg_pixels8_xy2_num,
  powerpc_clear_blocks_dcbz32,
  powerpc_clear_blocks_dcbz128,
  altivec_put_h264_chroma_mc8_num,
  altivec_avg_h264_chroma_mc8_num,
  altivec_put_h264_qpel16_h_lowpass_num,
  altivec_avg_h264_qpel16_h_lowpass_num,
  altivec_put_h264_qpel16_v_lowpass_num,
  altivec_avg_h264_qpel16_v_lowpass_num,
  altivec_put_h264_qpel16_hv_lowpass_num,
  altivec_avg_h264_qpel16_hv_lowpass_num,
  powerpc_perf_total
};
enum powerpc_data_index {
  powerpc_data_min = 0,
  powerpc_data_max,
  powerpc_data_sum,
  powerpc_data_num,
  powerpc_data_total
};
extern unsigned long long perfdata[POWERPC_NUM_PMC_ENABLED][powerpc_perf_total][powerpc_data_total];

#ifndef POWERPC_MODE_64BITS
#define POWERP_PMC_DATATYPE unsigned long
#define POWERPC_GET_PMC1(a) asm volatile("mfspr %0, 937" : "=r" (a))
#define POWERPC_GET_PMC2(a) asm volatile("mfspr %0, 938" : "=r" (a))
#if (POWERPC_NUM_PMC_ENABLED > 2)
#define POWERPC_GET_PMC3(a) asm volatile("mfspr %0, 941" : "=r" (a))
#define POWERPC_GET_PMC4(a) asm volatile("mfspr %0, 942" : "=r" (a))
#else
#define POWERPC_GET_PMC3(a) do {} while (0)
#define POWERPC_GET_PMC4(a) do {} while (0)
#endif
#if (POWERPC_NUM_PMC_ENABLED > 4)
#define POWERPC_GET_PMC5(a) asm volatile("mfspr %0, 929" : "=r" (a))
#define POWERPC_GET_PMC6(a) asm volatile("mfspr %0, 930" : "=r" (a))
#else
#define POWERPC_GET_PMC5(a) do {} while (0)
#define POWERPC_GET_PMC6(a) do {} while (0)
#endif
#else /* POWERPC_MODE_64BITS */
#define POWERP_PMC_DATATYPE unsigned long long
#define POWERPC_GET_PMC1(a) asm volatile("mfspr %0, 771" : "=r" (a))
#define POWERPC_GET_PMC2(a) asm volatile("mfspr %0, 772" : "=r" (a))
#if (POWERPC_NUM_PMC_ENABLED > 2)
#define POWERPC_GET_PMC3(a) asm volatile("mfspr %0, 773" : "=r" (a))
#define POWERPC_GET_PMC4(a) asm volatile("mfspr %0, 774" : "=r" (a))
#else
#define POWERPC_GET_PMC3(a) do {} while (0)
#define POWERPC_GET_PMC4(a) do {} while (0)
#endif
#if (POWERPC_NUM_PMC_ENABLED > 4)
#define POWERPC_GET_PMC5(a) asm volatile("mfspr %0, 775" : "=r" (a))
#define POWERPC_GET_PMC6(a) asm volatile("mfspr %0, 776" : "=r" (a))
#else
#define POWERPC_GET_PMC5(a) do {} while (0)
#define POWERPC_GET_PMC6(a) do {} while (0)
#endif
#endif /* POWERPC_MODE_64BITS */
#define POWERPC_PERF_DECLARE(a, cond)				\
  POWERP_PMC_DATATYPE						\
    pmc_start[POWERPC_NUM_PMC_ENABLED],				\
    pmc_stop[POWERPC_NUM_PMC_ENABLED],				\
    pmc_loop_index;
#define POWERPC_PERF_START_COUNT(a, cond) do { \
  POWERPC_GET_PMC6(pmc_start[5]); \
  POWERPC_GET_PMC5(pmc_start[4]); \
  POWERPC_GET_PMC4(pmc_start[3]); \
  POWERPC_GET_PMC3(pmc_start[2]); \
  POWERPC_GET_PMC2(pmc_start[1]); \
  POWERPC_GET_PMC1(pmc_start[0]); \
  } while (0)
#define POWERPC_PERF_STOP_COUNT(a, cond) do { \
  POWERPC_GET_PMC1(pmc_stop[0]); \
  POWERPC_GET_PMC2(pmc_stop[1]); \
  POWERPC_GET_PMC3(pmc_stop[2]); \
  POWERPC_GET_PMC4(pmc_stop[3]); \
  POWERPC_GET_PMC5(pmc_stop[4]); \
  POWERPC_GET_PMC6(pmc_stop[5]); \
  if (cond)                       \
  {                               \
    for(pmc_loop_index = 0;       \
        pmc_loop_index < POWERPC_NUM_PMC_ENABLED; \
        pmc_loop_index++)         \
    {                             \
      if (pmc_stop[pmc_loop_index] >= pmc_start[pmc_loop_index])  \
	{							  \
        POWERP_PMC_DATATYPE diff =				  \
          pmc_stop[pmc_loop_index] - pmc_start[pmc_loop_index];   \
        if (diff < perfdata[pmc_loop_index][a][powerpc_data_min]) \
          perfdata[pmc_loop_index][a][powerpc_data_min] = diff;   \
        if (diff > perfdata[pmc_loop_index][a][powerpc_data_max]) \
          perfdata[pmc_loop_index][a][powerpc_data_max] = diff;   \
        perfdata[pmc_loop_index][a][powerpc_data_sum] += diff;    \
        perfdata[pmc_loop_index][a][powerpc_data_num] ++;         \
      }                           \
    }                             \
  }                               \
} while (0)
#else /* POWERPC_PERFORMANCE_REPORT */
// those are needed to avoid empty statements.
#define POWERPC_PERF_DECLARE(a, cond)        int altivec_placeholder __attribute__ ((unused))
#define POWERPC_PERF_START_COUNT(a, cond)    do {} while (0)
#define POWERPC_PERF_STOP_COUNT(a, cond)     do {} while (0)
#endif /* POWERPC_PERFORMANCE_REPORT */

#endif /*  _DSPUTIL_PPC_ */