Mercurial > libavcodec.hg
view rpza.c @ 8872:706274a30a80 libavcodec
Remove one more commented-out line.
author | diego |
---|---|
date | Sat, 14 Feb 2009 19:41:16 +0000 |
parents | e9d9d946f213 |
children | 54bc8a2727b0 |
line wrap: on
line source
/* * Quicktime Video (RPZA) Video Decoder * Copyright (C) 2003 the ffmpeg project * * This file is part of FFmpeg. * * FFmpeg is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * FFmpeg is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with FFmpeg; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file libavcodec/rpza.c * QT RPZA Video Decoder by Roberto Togni * For more information about the RPZA format, visit: * http://www.pcisys.net/~melanson/codecs/ * * The RPZA decoder outputs RGB555 colorspace data. * * Note that this decoder reads big endian RGB555 pixel values from the * bytestream, arranges them in the host's endian order, and outputs * them to the final rendered map in the same host endian order. This is * intended behavior as the ffmpeg documentation states that RGB555 pixels * shall be stored in native CPU endianness. */ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include "libavutil/intreadwrite.h" #include "avcodec.h" typedef struct RpzaContext { AVCodecContext *avctx; AVFrame frame; const unsigned char *buf; int size; } RpzaContext; #define ADVANCE_BLOCK() \ { \ pixel_ptr += 4; \ if (pixel_ptr >= width) \ { \ pixel_ptr = 0; \ row_ptr += stride * 4; \ } \ total_blocks--; \ if (total_blocks < 0) \ { \ av_log(s->avctx, AV_LOG_ERROR, "warning: block counter just went negative (this should not happen)\n"); \ return; \ } \ } static void rpza_decode_stream(RpzaContext *s) { int width = s->avctx->width; int stride = s->frame.linesize[0] / 2; int row_inc = stride - 4; int stream_ptr = 0; int chunk_size; unsigned char opcode; int n_blocks; unsigned short colorA = 0, colorB; unsigned short color4[4]; unsigned char index, idx; unsigned short ta, tb; unsigned short *pixels = (unsigned short *)s->frame.data[0]; int row_ptr = 0; int pixel_ptr = 0; int block_ptr; int pixel_x, pixel_y; int total_blocks; /* First byte is always 0xe1. Warn if it's different */ if (s->buf[stream_ptr] != 0xe1) av_log(s->avctx, AV_LOG_ERROR, "First chunk byte is 0x%02x instead of 0xe1\n", s->buf[stream_ptr]); /* Get chunk size, ingnoring first byte */ chunk_size = AV_RB32(&s->buf[stream_ptr]) & 0x00FFFFFF; stream_ptr += 4; /* If length mismatch use size from MOV file and try to decode anyway */ if (chunk_size != s->size) av_log(s->avctx, AV_LOG_ERROR, "MOV chunk size != encoded chunk size; using MOV chunk size\n"); chunk_size = s->size; /* Number of 4x4 blocks in frame. */ total_blocks = ((s->avctx->width + 3) / 4) * ((s->avctx->height + 3) / 4); /* Process chunk data */ while (stream_ptr < chunk_size) { opcode = s->buf[stream_ptr++]; /* Get opcode */ n_blocks = (opcode & 0x1f) + 1; /* Extract block counter from opcode */ /* If opcode MSbit is 0, we need more data to decide what to do */ if ((opcode & 0x80) == 0) { colorA = (opcode << 8) | (s->buf[stream_ptr++]); opcode = 0; if ((s->buf[stream_ptr] & 0x80) != 0) { /* Must behave as opcode 110xxxxx, using colorA computed * above. Use fake opcode 0x20 to enter switch block at * the right place */ opcode = 0x20; n_blocks = 1; } } switch (opcode & 0xe0) { /* Skip blocks */ case 0x80: while (n_blocks--) { ADVANCE_BLOCK(); } break; /* Fill blocks with one color */ case 0xa0: colorA = AV_RB16 (&s->buf[stream_ptr]); stream_ptr += 2; while (n_blocks--) { block_ptr = row_ptr + pixel_ptr; for (pixel_y = 0; pixel_y < 4; pixel_y++) { for (pixel_x = 0; pixel_x < 4; pixel_x++){ pixels[block_ptr] = colorA; block_ptr++; } block_ptr += row_inc; } ADVANCE_BLOCK(); } break; /* Fill blocks with 4 colors */ case 0xc0: colorA = AV_RB16 (&s->buf[stream_ptr]); stream_ptr += 2; case 0x20: colorB = AV_RB16 (&s->buf[stream_ptr]); stream_ptr += 2; /* sort out the colors */ color4[0] = colorB; color4[1] = 0; color4[2] = 0; color4[3] = colorA; /* red components */ ta = (colorA >> 10) & 0x1F; tb = (colorB >> 10) & 0x1F; color4[1] |= ((11 * ta + 21 * tb) >> 5) << 10; color4[2] |= ((21 * ta + 11 * tb) >> 5) << 10; /* green components */ ta = (colorA >> 5) & 0x1F; tb = (colorB >> 5) & 0x1F; color4[1] |= ((11 * ta + 21 * tb) >> 5) << 5; color4[2] |= ((21 * ta + 11 * tb) >> 5) << 5; /* blue components */ ta = colorA & 0x1F; tb = colorB & 0x1F; color4[1] |= ((11 * ta + 21 * tb) >> 5); color4[2] |= ((21 * ta + 11 * tb) >> 5); while (n_blocks--) { block_ptr = row_ptr + pixel_ptr; for (pixel_y = 0; pixel_y < 4; pixel_y++) { index = s->buf[stream_ptr++]; for (pixel_x = 0; pixel_x < 4; pixel_x++){ idx = (index >> (2 * (3 - pixel_x))) & 0x03; pixels[block_ptr] = color4[idx]; block_ptr++; } block_ptr += row_inc; } ADVANCE_BLOCK(); } break; /* Fill block with 16 colors */ case 0x00: block_ptr = row_ptr + pixel_ptr; for (pixel_y = 0; pixel_y < 4; pixel_y++) { for (pixel_x = 0; pixel_x < 4; pixel_x++){ /* We already have color of upper left pixel */ if ((pixel_y != 0) || (pixel_x !=0)) { colorA = AV_RB16 (&s->buf[stream_ptr]); stream_ptr += 2; } pixels[block_ptr] = colorA; block_ptr++; } block_ptr += row_inc; } ADVANCE_BLOCK(); break; /* Unknown opcode */ default: av_log(s->avctx, AV_LOG_ERROR, "Unknown opcode %d in rpza chunk." " Skip remaining %d bytes of chunk data.\n", opcode, chunk_size - stream_ptr); return; } /* Opcode switch */ } } static av_cold int rpza_decode_init(AVCodecContext *avctx) { RpzaContext *s = avctx->priv_data; s->avctx = avctx; avctx->pix_fmt = PIX_FMT_RGB555; s->frame.data[0] = NULL; return 0; } static int rpza_decode_frame(AVCodecContext *avctx, void *data, int *data_size, const uint8_t *buf, int buf_size) { RpzaContext *s = avctx->priv_data; s->buf = buf; s->size = buf_size; s->frame.reference = 1; s->frame.buffer_hints = FF_BUFFER_HINTS_VALID | FF_BUFFER_HINTS_PRESERVE | FF_BUFFER_HINTS_REUSABLE; if (avctx->reget_buffer(avctx, &s->frame)) { av_log(avctx, AV_LOG_ERROR, "reget_buffer() failed\n"); return -1; } rpza_decode_stream(s); *data_size = sizeof(AVFrame); *(AVFrame*)data = s->frame; /* always report that the buffer was completely consumed */ return buf_size; } static av_cold int rpza_decode_end(AVCodecContext *avctx) { RpzaContext *s = avctx->priv_data; if (s->frame.data[0]) avctx->release_buffer(avctx, &s->frame); return 0; } AVCodec rpza_decoder = { "rpza", CODEC_TYPE_VIDEO, CODEC_ID_RPZA, sizeof(RpzaContext), rpza_decode_init, NULL, rpza_decode_end, rpza_decode_frame, CODEC_CAP_DR1, .long_name = NULL_IF_CONFIG_SMALL("QuickTime video (RPZA)"), };