view i386/fft_3dn2.c @ 5876:731ee5ad6bde libavcodec

Correct assignment of interlaced_frame; was being set on output frames, in display order, based on decoding information in decoding order. Now set properly, immediately upon completion of decode. Based on original patch from Reinhard Nissl, rnisssl % gmx , de Original Thread: [FFmpeg-devel] H.264 + PAFF: BBC HD recording shows extreme interlacing artefacts, Thu, 01 Nov 2007 22:43:09

/*
 * FFT/MDCT transform with Extended 3DNow! optimizations
 * Copyright (c) 2006 Zuxy MENG Jie, Loren Merritt
 * Based on fft_sse.c copyright (c) 2002 Fabrice Bellard.
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */
#include "dsputil.h"

static const int p1m1[2] __attribute__((aligned(8))) =
    { 0, 1 << 31 };

static const int m1p1[2] __attribute__((aligned(8))) =
    { 1 << 31, 0 };

void ff_fft_calc_3dn2(FFTContext *s, FFTComplex *z)
{
    int ln = s->nbits;
    long i, j;
    long nblocks, nloops;
    FFTComplex *p, *cptr;

    asm volatile(
        /* FEMMS is not a must here but recommended by AMD */
        "femms \n\t"
        "movq %0, %%mm7 \n\t"
        ::"m"(*(s->inverse ? m1p1 : p1m1))
    );

    i = 8 << ln;
    asm volatile(
        "1: \n\t"
        "sub $32, %0 \n\t"
        "movq    (%0,%1), %%mm0 \n\t"
        "movq  16(%0,%1), %%mm1 \n\t"
        "movq   8(%0,%1), %%mm2 \n\t"
        "movq  24(%0,%1), %%mm3 \n\t"
        "movq      %%mm0, %%mm4 \n\t"
        "movq      %%mm1, %%mm5 \n\t"
        "pfadd     %%mm2, %%mm0 \n\t"
        "pfadd     %%mm3, %%mm1 \n\t"
        "pfsub     %%mm2, %%mm4 \n\t"
        "pfsub     %%mm3, %%mm5 \n\t"
        "movq      %%mm0, %%mm2 \n\t"
        "pswapd    %%mm5, %%mm5 \n\t"
        "movq      %%mm4, %%mm3 \n\t"
        "pxor      %%mm7, %%mm5 \n\t"
        "pfadd     %%mm1, %%mm0 \n\t"
        "pfadd     %%mm5, %%mm4 \n\t"
        "pfsub     %%mm1, %%mm2 \n\t"
        "pfsub     %%mm5, %%mm3 \n\t"
        "movq      %%mm0,   (%0,%1) \n\t"
        "movq      %%mm4,  8(%0,%1) \n\t"
        "movq      %%mm2, 16(%0,%1) \n\t"
        "movq      %%mm3, 24(%0,%1) \n\t"
        "jg 1b \n\t"
        :"+r"(i)
        :"r"(z)
    );
    /* pass 2 .. ln-1 */

    nblocks = 1 << (ln-3);
    nloops = 1 << 2;
    cptr = s->exptab1;
    do {
        p = z;
        j = nblocks;
        do {
            i = nloops*8;
            asm volatile(
                "1: \n\t"
                "sub $16, %0 \n\t"
                "movq    (%1,%0), %%mm0 \n\t"
                "movq   8(%1,%0), %%mm1 \n\t"
                "movq    (%2,%0), %%mm2 \n\t"
                "movq   8(%2,%0), %%mm3 \n\t"
                "movq  (%3,%0,2), %%mm4 \n\t"
                "movq 8(%3,%0,2), %%mm5 \n\t"
                "pswapd    %%mm4, %%mm6 \n\t" // no need for cptr[2] & cptr[3]
                "pswapd    %%mm5, %%mm7 \n\t"
                "pfmul     %%mm2, %%mm4 \n\t" // cre*re cim*im
                "pfmul     %%mm3, %%mm5 \n\t"
                "pfmul     %%mm2, %%mm6 \n\t" // cim*re cre*im
                "pfmul     %%mm3, %%mm7 \n\t"
                "pfpnacc   %%mm6, %%mm4 \n\t" // cre*re-cim*im cim*re+cre*im
                "pfpnacc   %%mm7, %%mm5 \n\t"
                "movq      %%mm0, %%mm2 \n\t"
                "movq      %%mm1, %%mm3 \n\t"
                "pfadd     %%mm4, %%mm0 \n\t"
                "pfadd     %%mm5, %%mm1 \n\t"
                "pfsub     %%mm4, %%mm2 \n\t"
                "pfsub     %%mm5, %%mm3 \n\t"
                "movq      %%mm0,  (%1,%0) \n\t"
                "movq      %%mm1, 8(%1,%0) \n\t"
                "movq      %%mm2,  (%2,%0) \n\t"
                "movq      %%mm3, 8(%2,%0) \n\t"
                "jg 1b \n\t"
                :"+r"(i)
                :"r"(p), "r"(p + nloops), "r"(cptr)
            );
            p += nloops*2;
        } while (--j);
        cptr += nloops*2;
        nblocks >>= 1;
        nloops <<= 1;
    } while (nblocks != 0);
    asm volatile("femms");
}

void ff_imdct_calc_3dn2(MDCTContext *s, FFTSample *output,
                        const FFTSample *input, FFTSample *tmp)
{
    long k, n8, n4, n2, n;
    const uint16_t *revtab = s->fft.revtab;
    const FFTSample *tcos = s->tcos;
    const FFTSample *tsin = s->tsin;
    const FFTSample *in1, *in2;
    FFTComplex *z = (FFTComplex *)tmp;

    n = 1 << s->nbits;
    n2 = n >> 1;
    n4 = n >> 2;
    n8 = n >> 3;

    /* pre rotation */
    in1 = input;
    in2 = input + n2 - 1;
    for(k = 0; k < n4; k++) {
        // FIXME a single block is faster, but gcc 2.95 and 3.4.x on 32bit can't compile it
        asm volatile(
            "movd       %0, %%mm0 \n\t"
            "movd       %2, %%mm1 \n\t"
            "punpckldq  %1, %%mm0 \n\t"
            "punpckldq  %3, %%mm1 \n\t"
            "movq    %%mm0, %%mm2 \n\t"
            "pfmul   %%mm1, %%mm0 \n\t"
            "pswapd  %%mm1, %%mm1 \n\t"
            "pfmul   %%mm1, %%mm2 \n\t"
            "pfpnacc %%mm2, %%mm0 \n\t"
            ::"m"(in2[-2*k]), "m"(in1[2*k]),
              "m"(tcos[k]), "m"(tsin[k])
        );
        asm volatile(
            "movq    %%mm0, %0    \n\t"
            :"=m"(z[revtab[k]])
        );
    }

    ff_fft_calc(&s->fft, z);

    /* post rotation + reordering */
    for(k = 0; k < n4; k++) {
        asm volatile(
            "movq       %0, %%mm0 \n\t"
            "movd       %1, %%mm1 \n\t"
            "punpckldq  %2, %%mm1 \n\t"
            "movq    %%mm0, %%mm2 \n\t"
            "pfmul   %%mm1, %%mm0 \n\t"
            "pswapd  %%mm1, %%mm1 \n\t"
            "pfmul   %%mm1, %%mm2 \n\t"
            "pfpnacc %%mm2, %%mm0 \n\t"
            "movq    %%mm0, %0    \n\t"
            :"+m"(z[k])
            :"m"(tcos[k]), "m"(tsin[k])
        );
    }

    k = n-8;
    asm volatile("movd %0, %%mm7" ::"r"(1<<31));
    asm volatile(
        "1: \n\t"
        "movq    (%4,%0), %%mm0 \n\t" // z[n8+k]
        "neg %0 \n\t"
        "pswapd -8(%4,%0), %%mm1 \n\t" // z[n8-1-k]
        "movq      %%mm0, %%mm2 \n\t"
        "pxor      %%mm7, %%mm2 \n\t"
        "punpckldq %%mm1, %%mm2 \n\t"
        "pswapd    %%mm2, %%mm3 \n\t"
        "punpckhdq %%mm1, %%mm0 \n\t"
        "pswapd    %%mm0, %%mm4 \n\t"
        "pxor      %%mm7, %%mm0 \n\t"
        "pxor      %%mm7, %%mm4 \n\t"
        "movq      %%mm3, -8(%3,%0) \n\t" // output[n-2-2*k] = { z[n8-1-k].im, -z[n8+k].re }
        "movq      %%mm4, -8(%2,%0) \n\t" // output[n2-2-2*k]= { -z[n8-1-k].re, z[n8+k].im }
        "neg %0 \n\t"
        "movq      %%mm0, (%1,%0) \n\t"   // output[2*k]     = { -z[n8+k].im, z[n8-1-k].re }
        "movq      %%mm2, (%2,%0) \n\t"   // output[n2+2*k]  = { -z[n8+k].re, z[n8-1-k].im }
        "sub $8, %0 \n\t"
        "jge 1b \n\t"
        :"+r"(k)
        :"r"(output), "r"(output+n2), "r"(output+n), "r"(z+n8)
        :"memory"
    );
    asm volatile("femms");
}