Mercurial > libavcodec.hg
view jrevdct.c @ 10852:86d7ab878805 libavcodec
Get rid of #include "svq3.c"
functions called more than per mb are moved into the header, scan8 is also
as it must be known at compiletime.
The code after this patch duplicates h264data.h, this has been done to minimize
the changes in this step and allow more fine grained benchmarking.
Speedwise this is 1% faster on my pentium dual core with diegos cursed cathedral
sample.
author | michael |
---|---|
date | Tue, 12 Jan 2010 05:30:31 +0000 |
parents | 674090f13019 |
children | 7dd2a45249a9 |
line wrap: on
line source
/* * jrevdct.c * * This file is part of the Independent JPEG Group's software. * * The authors make NO WARRANTY or representation, either express or implied, * with respect to this software, its quality, accuracy, merchantability, or * fitness for a particular purpose. This software is provided "AS IS", and * you, its user, assume the entire risk as to its quality and accuracy. * * This software is copyright (C) 1991, 1992, Thomas G. Lane. * All Rights Reserved except as specified below. * * Permission is hereby granted to use, copy, modify, and distribute this * software (or portions thereof) for any purpose, without fee, subject to * these conditions: * (1) If any part of the source code for this software is distributed, then * this README file must be included, with this copyright and no-warranty * notice unaltered; and any additions, deletions, or changes to the original * files must be clearly indicated in accompanying documentation. * (2) If only executable code is distributed, then the accompanying * documentation must state that "this software is based in part on the work * of the Independent JPEG Group". * (3) Permission for use of this software is granted only if the user accepts * full responsibility for any undesirable consequences; the authors accept * NO LIABILITY for damages of any kind. * * These conditions apply to any software derived from or based on the IJG * code, not just to the unmodified library. If you use our work, you ought * to acknowledge us. * * Permission is NOT granted for the use of any IJG author's name or company * name in advertising or publicity relating to this software or products * derived from it. This software may be referred to only as "the Independent * JPEG Group's software". * * We specifically permit and encourage the use of this software as the basis * of commercial products, provided that all warranty or liability claims are * assumed by the product vendor. * * This file contains the basic inverse-DCT transformation subroutine. * * This implementation is based on an algorithm described in * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. * The primary algorithm described there uses 11 multiplies and 29 adds. * We use their alternate method with 12 multiplies and 32 adds. * The advantage of this method is that no data path contains more than one * multiplication; this allows a very simple and accurate implementation in * scaled fixed-point arithmetic, with a minimal number of shifts. * * I've made lots of modifications to attempt to take advantage of the * sparse nature of the DCT matrices we're getting. Although the logic * is cumbersome, it's straightforward and the resulting code is much * faster. * * A better way to do this would be to pass in the DCT block as a sparse * matrix, perhaps with the difference cases encoded. */ /** * @file libavcodec/jrevdct.c * Independent JPEG Group's LLM idct. */ #include "libavutil/common.h" #include "dsputil.h" #define EIGHT_BIT_SAMPLES #define DCTSIZE 8 #define DCTSIZE2 64 #define GLOBAL #define RIGHT_SHIFT(x, n) ((x) >> (n)) typedef DCTELEM DCTBLOCK[DCTSIZE2]; #define CONST_BITS 13 /* * This routine is specialized to the case DCTSIZE = 8. */ #if DCTSIZE != 8 Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ #endif /* * A 2-D IDCT can be done by 1-D IDCT on each row followed by 1-D IDCT * on each column. Direct algorithms are also available, but they are * much more complex and seem not to be any faster when reduced to code. * * The poop on this scaling stuff is as follows: * * Each 1-D IDCT step produces outputs which are a factor of sqrt(N) * larger than the true IDCT outputs. The final outputs are therefore * a factor of N larger than desired; since N=8 this can be cured by * a simple right shift at the end of the algorithm. The advantage of * this arrangement is that we save two multiplications per 1-D IDCT, * because the y0 and y4 inputs need not be divided by sqrt(N). * * We have to do addition and subtraction of the integer inputs, which * is no problem, and multiplication by fractional constants, which is * a problem to do in integer arithmetic. We multiply all the constants * by CONST_SCALE and convert them to integer constants (thus retaining * CONST_BITS bits of precision in the constants). After doing a * multiplication we have to divide the product by CONST_SCALE, with proper * rounding, to produce the correct output. This division can be done * cheaply as a right shift of CONST_BITS bits. We postpone shifting * as long as possible so that partial sums can be added together with * full fractional precision. * * The outputs of the first pass are scaled up by PASS1_BITS bits so that * they are represented to better-than-integral precision. These outputs * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word * with the recommended scaling. (To scale up 12-bit sample data further, an * intermediate int32 array would be needed.) * * To avoid overflow of the 32-bit intermediate results in pass 2, we must * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis * shows that the values given below are the most effective. */ #ifdef EIGHT_BIT_SAMPLES #define PASS1_BITS 2 #else #define PASS1_BITS 1 /* lose a little precision to avoid overflow */ #endif #define ONE ((int32_t) 1) #define CONST_SCALE (ONE << CONST_BITS) /* Convert a positive real constant to an integer scaled by CONST_SCALE. * IMPORTANT: if your compiler doesn't do this arithmetic at compile time, * you will pay a significant penalty in run time. In that case, figure * the correct integer constant values and insert them by hand. */ /* Actually FIX is no longer used, we precomputed them all */ #define FIX(x) ((int32_t) ((x) * CONST_SCALE + 0.5)) /* Descale and correctly round an int32_t value that's scaled by N bits. * We assume RIGHT_SHIFT rounds towards minus infinity, so adding * the fudge factor is correct for either sign of X. */ #define DESCALE(x,n) RIGHT_SHIFT((x) + (ONE << ((n)-1)), n) /* Multiply an int32_t variable by an int32_t constant to yield an int32_t result. * For 8-bit samples with the recommended scaling, all the variable * and constant values involved are no more than 16 bits wide, so a * 16x16->32 bit multiply can be used instead of a full 32x32 multiply; * this provides a useful speedup on many machines. * There is no way to specify a 16x16->32 multiply in portable C, but * some C compilers will do the right thing if you provide the correct * combination of casts. * NB: for 12-bit samples, a full 32-bit multiplication will be needed. */ #ifdef EIGHT_BIT_SAMPLES #ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ #define MULTIPLY(var,const) (((int16_t) (var)) * ((int16_t) (const))) #endif #ifdef SHORTxLCONST_32 /* known to work with Microsoft C 6.0 */ #define MULTIPLY(var,const) (((int16_t) (var)) * ((int32_t) (const))) #endif #endif #ifndef MULTIPLY /* default definition */ #define MULTIPLY(var,const) ((var) * (const)) #endif /* Unlike our decoder where we approximate the FIXes, we need to use exact ones here or successive P-frames will drift too much with Reference frame coding */ #define FIX_0_211164243 1730 #define FIX_0_275899380 2260 #define FIX_0_298631336 2446 #define FIX_0_390180644 3196 #define FIX_0_509795579 4176 #define FIX_0_541196100 4433 #define FIX_0_601344887 4926 #define FIX_0_765366865 6270 #define FIX_0_785694958 6436 #define FIX_0_899976223 7373 #define FIX_1_061594337 8697 #define FIX_1_111140466 9102 #define FIX_1_175875602 9633 #define FIX_1_306562965 10703 #define FIX_1_387039845 11363 #define FIX_1_451774981 11893 #define FIX_1_501321110 12299 #define FIX_1_662939225 13623 #define FIX_1_847759065 15137 #define FIX_1_961570560 16069 #define FIX_2_053119869 16819 #define FIX_2_172734803 17799 #define FIX_2_562915447 20995 #define FIX_3_072711026 25172 /* * Perform the inverse DCT on one block of coefficients. */ void j_rev_dct(DCTBLOCK data) { int32_t tmp0, tmp1, tmp2, tmp3; int32_t tmp10, tmp11, tmp12, tmp13; int32_t z1, z2, z3, z4, z5; int32_t d0, d1, d2, d3, d4, d5, d6, d7; register DCTELEM *dataptr; int rowctr; /* Pass 1: process rows. */ /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ /* furthermore, we scale the results by 2**PASS1_BITS. */ dataptr = data; for (rowctr = DCTSIZE-1; rowctr >= 0; rowctr--) { /* Due to quantization, we will usually find that many of the input * coefficients are zero, especially the AC terms. We can exploit this * by short-circuiting the IDCT calculation for any row in which all * the AC terms are zero. In that case each output is equal to the * DC coefficient (with scale factor as needed). * With typical images and quantization tables, half or more of the * row DCT calculations can be simplified this way. */ register int *idataptr = (int*)dataptr; /* WARNING: we do the same permutation as MMX idct to simplify the video core */ d0 = dataptr[0]; d2 = dataptr[1]; d4 = dataptr[2]; d6 = dataptr[3]; d1 = dataptr[4]; d3 = dataptr[5]; d5 = dataptr[6]; d7 = dataptr[7]; if ((d1 | d2 | d3 | d4 | d5 | d6 | d7) == 0) { /* AC terms all zero */ if (d0) { /* Compute a 32 bit value to assign. */ DCTELEM dcval = (DCTELEM) (d0 << PASS1_BITS); register int v = (dcval & 0xffff) | ((dcval << 16) & 0xffff0000); idataptr[0] = v; idataptr[1] = v; idataptr[2] = v; idataptr[3] = v; } dataptr += DCTSIZE; /* advance pointer to next row */ continue; } /* Even part: reverse the even part of the forward DCT. */ /* The rotator is sqrt(2)*c(-6). */ { if (d6) { if (d2) { /* d0 != 0, d2 != 0, d4 != 0, d6 != 0 */ z1 = MULTIPLY(d2 + d6, FIX_0_541196100); tmp2 = z1 + MULTIPLY(-d6, FIX_1_847759065); tmp3 = z1 + MULTIPLY(d2, FIX_0_765366865); tmp0 = (d0 + d4) << CONST_BITS; tmp1 = (d0 - d4) << CONST_BITS; tmp10 = tmp0 + tmp3; tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; } else { /* d0 != 0, d2 == 0, d4 != 0, d6 != 0 */ tmp2 = MULTIPLY(-d6, FIX_1_306562965); tmp3 = MULTIPLY(d6, FIX_0_541196100); tmp0 = (d0 + d4) << CONST_BITS; tmp1 = (d0 - d4) << CONST_BITS; tmp10 = tmp0 + tmp3; tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; } } else { if (d2) { /* d0 != 0, d2 != 0, d4 != 0, d6 == 0 */ tmp2 = MULTIPLY(d2, FIX_0_541196100); tmp3 = MULTIPLY(d2, FIX_1_306562965); tmp0 = (d0 + d4) << CONST_BITS; tmp1 = (d0 - d4) << CONST_BITS; tmp10 = tmp0 + tmp3; tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; } else { /* d0 != 0, d2 == 0, d4 != 0, d6 == 0 */ tmp10 = tmp13 = (d0 + d4) << CONST_BITS; tmp11 = tmp12 = (d0 - d4) << CONST_BITS; } } /* Odd part per figure 8; the matrix is unitary and hence its * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. */ if (d7) { if (d5) { if (d3) { if (d1) { /* d1 != 0, d3 != 0, d5 != 0, d7 != 0 */ z1 = d7 + d1; z2 = d5 + d3; z3 = d7 + d3; z4 = d5 + d1; z5 = MULTIPLY(z3 + z4, FIX_1_175875602); tmp0 = MULTIPLY(d7, FIX_0_298631336); tmp1 = MULTIPLY(d5, FIX_2_053119869); tmp2 = MULTIPLY(d3, FIX_3_072711026); tmp3 = MULTIPLY(d1, FIX_1_501321110); z1 = MULTIPLY(-z1, FIX_0_899976223); z2 = MULTIPLY(-z2, FIX_2_562915447); z3 = MULTIPLY(-z3, FIX_1_961570560); z4 = MULTIPLY(-z4, FIX_0_390180644); z3 += z5; z4 += z5; tmp0 += z1 + z3; tmp1 += z2 + z4; tmp2 += z2 + z3; tmp3 += z1 + z4; } else { /* d1 == 0, d3 != 0, d5 != 0, d7 != 0 */ z2 = d5 + d3; z3 = d7 + d3; z5 = MULTIPLY(z3 + d5, FIX_1_175875602); tmp0 = MULTIPLY(d7, FIX_0_298631336); tmp1 = MULTIPLY(d5, FIX_2_053119869); tmp2 = MULTIPLY(d3, FIX_3_072711026); z1 = MULTIPLY(-d7, FIX_0_899976223); z2 = MULTIPLY(-z2, FIX_2_562915447); z3 = MULTIPLY(-z3, FIX_1_961570560); z4 = MULTIPLY(-d5, FIX_0_390180644); z3 += z5; z4 += z5; tmp0 += z1 + z3; tmp1 += z2 + z4; tmp2 += z2 + z3; tmp3 = z1 + z4; } } else { if (d1) { /* d1 != 0, d3 == 0, d5 != 0, d7 != 0 */ z1 = d7 + d1; z4 = d5 + d1; z5 = MULTIPLY(d7 + z4, FIX_1_175875602); tmp0 = MULTIPLY(d7, FIX_0_298631336); tmp1 = MULTIPLY(d5, FIX_2_053119869); tmp3 = MULTIPLY(d1, FIX_1_501321110); z1 = MULTIPLY(-z1, FIX_0_899976223); z2 = MULTIPLY(-d5, FIX_2_562915447); z3 = MULTIPLY(-d7, FIX_1_961570560); z4 = MULTIPLY(-z4, FIX_0_390180644); z3 += z5; z4 += z5; tmp0 += z1 + z3; tmp1 += z2 + z4; tmp2 = z2 + z3; tmp3 += z1 + z4; } else { /* d1 == 0, d3 == 0, d5 != 0, d7 != 0 */ tmp0 = MULTIPLY(-d7, FIX_0_601344887); z1 = MULTIPLY(-d7, FIX_0_899976223); z3 = MULTIPLY(-d7, FIX_1_961570560); tmp1 = MULTIPLY(-d5, FIX_0_509795579); z2 = MULTIPLY(-d5, FIX_2_562915447); z4 = MULTIPLY(-d5, FIX_0_390180644); z5 = MULTIPLY(d5 + d7, FIX_1_175875602); z3 += z5; z4 += z5; tmp0 += z3; tmp1 += z4; tmp2 = z2 + z3; tmp3 = z1 + z4; } } } else { if (d3) { if (d1) { /* d1 != 0, d3 != 0, d5 == 0, d7 != 0 */ z1 = d7 + d1; z3 = d7 + d3; z5 = MULTIPLY(z3 + d1, FIX_1_175875602); tmp0 = MULTIPLY(d7, FIX_0_298631336); tmp2 = MULTIPLY(d3, FIX_3_072711026); tmp3 = MULTIPLY(d1, FIX_1_501321110); z1 = MULTIPLY(-z1, FIX_0_899976223); z2 = MULTIPLY(-d3, FIX_2_562915447); z3 = MULTIPLY(-z3, FIX_1_961570560); z4 = MULTIPLY(-d1, FIX_0_390180644); z3 += z5; z4 += z5; tmp0 += z1 + z3; tmp1 = z2 + z4; tmp2 += z2 + z3; tmp3 += z1 + z4; } else { /* d1 == 0, d3 != 0, d5 == 0, d7 != 0 */ z3 = d7 + d3; tmp0 = MULTIPLY(-d7, FIX_0_601344887); z1 = MULTIPLY(-d7, FIX_0_899976223); tmp2 = MULTIPLY(d3, FIX_0_509795579); z2 = MULTIPLY(-d3, FIX_2_562915447); z5 = MULTIPLY(z3, FIX_1_175875602); z3 = MULTIPLY(-z3, FIX_0_785694958); tmp0 += z3; tmp1 = z2 + z5; tmp2 += z3; tmp3 = z1 + z5; } } else { if (d1) { /* d1 != 0, d3 == 0, d5 == 0, d7 != 0 */ z1 = d7 + d1; z5 = MULTIPLY(z1, FIX_1_175875602); z1 = MULTIPLY(z1, FIX_0_275899380); z3 = MULTIPLY(-d7, FIX_1_961570560); tmp0 = MULTIPLY(-d7, FIX_1_662939225); z4 = MULTIPLY(-d1, FIX_0_390180644); tmp3 = MULTIPLY(d1, FIX_1_111140466); tmp0 += z1; tmp1 = z4 + z5; tmp2 = z3 + z5; tmp3 += z1; } else { /* d1 == 0, d3 == 0, d5 == 0, d7 != 0 */ tmp0 = MULTIPLY(-d7, FIX_1_387039845); tmp1 = MULTIPLY(d7, FIX_1_175875602); tmp2 = MULTIPLY(-d7, FIX_0_785694958); tmp3 = MULTIPLY(d7, FIX_0_275899380); } } } } else { if (d5) { if (d3) { if (d1) { /* d1 != 0, d3 != 0, d5 != 0, d7 == 0 */ z2 = d5 + d3; z4 = d5 + d1; z5 = MULTIPLY(d3 + z4, FIX_1_175875602); tmp1 = MULTIPLY(d5, FIX_2_053119869); tmp2 = MULTIPLY(d3, FIX_3_072711026); tmp3 = MULTIPLY(d1, FIX_1_501321110); z1 = MULTIPLY(-d1, FIX_0_899976223); z2 = MULTIPLY(-z2, FIX_2_562915447); z3 = MULTIPLY(-d3, FIX_1_961570560); z4 = MULTIPLY(-z4, FIX_0_390180644); z3 += z5; z4 += z5; tmp0 = z1 + z3; tmp1 += z2 + z4; tmp2 += z2 + z3; tmp3 += z1 + z4; } else { /* d1 == 0, d3 != 0, d5 != 0, d7 == 0 */ z2 = d5 + d3; z5 = MULTIPLY(z2, FIX_1_175875602); tmp1 = MULTIPLY(d5, FIX_1_662939225); z4 = MULTIPLY(-d5, FIX_0_390180644); z2 = MULTIPLY(-z2, FIX_1_387039845); tmp2 = MULTIPLY(d3, FIX_1_111140466); z3 = MULTIPLY(-d3, FIX_1_961570560); tmp0 = z3 + z5; tmp1 += z2; tmp2 += z2; tmp3 = z4 + z5; } } else { if (d1) { /* d1 != 0, d3 == 0, d5 != 0, d7 == 0 */ z4 = d5 + d1; z5 = MULTIPLY(z4, FIX_1_175875602); z1 = MULTIPLY(-d1, FIX_0_899976223); tmp3 = MULTIPLY(d1, FIX_0_601344887); tmp1 = MULTIPLY(-d5, FIX_0_509795579); z2 = MULTIPLY(-d5, FIX_2_562915447); z4 = MULTIPLY(z4, FIX_0_785694958); tmp0 = z1 + z5; tmp1 += z4; tmp2 = z2 + z5; tmp3 += z4; } else { /* d1 == 0, d3 == 0, d5 != 0, d7 == 0 */ tmp0 = MULTIPLY(d5, FIX_1_175875602); tmp1 = MULTIPLY(d5, FIX_0_275899380); tmp2 = MULTIPLY(-d5, FIX_1_387039845); tmp3 = MULTIPLY(d5, FIX_0_785694958); } } } else { if (d3) { if (d1) { /* d1 != 0, d3 != 0, d5 == 0, d7 == 0 */ z5 = d1 + d3; tmp3 = MULTIPLY(d1, FIX_0_211164243); tmp2 = MULTIPLY(-d3, FIX_1_451774981); z1 = MULTIPLY(d1, FIX_1_061594337); z2 = MULTIPLY(-d3, FIX_2_172734803); z4 = MULTIPLY(z5, FIX_0_785694958); z5 = MULTIPLY(z5, FIX_1_175875602); tmp0 = z1 - z4; tmp1 = z2 + z4; tmp2 += z5; tmp3 += z5; } else { /* d1 == 0, d3 != 0, d5 == 0, d7 == 0 */ tmp0 = MULTIPLY(-d3, FIX_0_785694958); tmp1 = MULTIPLY(-d3, FIX_1_387039845); tmp2 = MULTIPLY(-d3, FIX_0_275899380); tmp3 = MULTIPLY(d3, FIX_1_175875602); } } else { if (d1) { /* d1 != 0, d3 == 0, d5 == 0, d7 == 0 */ tmp0 = MULTIPLY(d1, FIX_0_275899380); tmp1 = MULTIPLY(d1, FIX_0_785694958); tmp2 = MULTIPLY(d1, FIX_1_175875602); tmp3 = MULTIPLY(d1, FIX_1_387039845); } else { /* d1 == 0, d3 == 0, d5 == 0, d7 == 0 */ tmp0 = tmp1 = tmp2 = tmp3 = 0; } } } } } /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ dataptr[0] = (DCTELEM) DESCALE(tmp10 + tmp3, CONST_BITS-PASS1_BITS); dataptr[7] = (DCTELEM) DESCALE(tmp10 - tmp3, CONST_BITS-PASS1_BITS); dataptr[1] = (DCTELEM) DESCALE(tmp11 + tmp2, CONST_BITS-PASS1_BITS); dataptr[6] = (DCTELEM) DESCALE(tmp11 - tmp2, CONST_BITS-PASS1_BITS); dataptr[2] = (DCTELEM) DESCALE(tmp12 + tmp1, CONST_BITS-PASS1_BITS); dataptr[5] = (DCTELEM) DESCALE(tmp12 - tmp1, CONST_BITS-PASS1_BITS); dataptr[3] = (DCTELEM) DESCALE(tmp13 + tmp0, CONST_BITS-PASS1_BITS); dataptr[4] = (DCTELEM) DESCALE(tmp13 - tmp0, CONST_BITS-PASS1_BITS); dataptr += DCTSIZE; /* advance pointer to next row */ } /* Pass 2: process columns. */ /* Note that we must descale the results by a factor of 8 == 2**3, */ /* and also undo the PASS1_BITS scaling. */ dataptr = data; for (rowctr = DCTSIZE-1; rowctr >= 0; rowctr--) { /* Columns of zeroes can be exploited in the same way as we did with rows. * However, the row calculation has created many nonzero AC terms, so the * simplification applies less often (typically 5% to 10% of the time). * On machines with very fast multiplication, it's possible that the * test takes more time than it's worth. In that case this section * may be commented out. */ d0 = dataptr[DCTSIZE*0]; d1 = dataptr[DCTSIZE*1]; d2 = dataptr[DCTSIZE*2]; d3 = dataptr[DCTSIZE*3]; d4 = dataptr[DCTSIZE*4]; d5 = dataptr[DCTSIZE*5]; d6 = dataptr[DCTSIZE*6]; d7 = dataptr[DCTSIZE*7]; /* Even part: reverse the even part of the forward DCT. */ /* The rotator is sqrt(2)*c(-6). */ if (d6) { if (d2) { /* d0 != 0, d2 != 0, d4 != 0, d6 != 0 */ z1 = MULTIPLY(d2 + d6, FIX_0_541196100); tmp2 = z1 + MULTIPLY(-d6, FIX_1_847759065); tmp3 = z1 + MULTIPLY(d2, FIX_0_765366865); tmp0 = (d0 + d4) << CONST_BITS; tmp1 = (d0 - d4) << CONST_BITS; tmp10 = tmp0 + tmp3; tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; } else { /* d0 != 0, d2 == 0, d4 != 0, d6 != 0 */ tmp2 = MULTIPLY(-d6, FIX_1_306562965); tmp3 = MULTIPLY(d6, FIX_0_541196100); tmp0 = (d0 + d4) << CONST_BITS; tmp1 = (d0 - d4) << CONST_BITS; tmp10 = tmp0 + tmp3; tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; } } else { if (d2) { /* d0 != 0, d2 != 0, d4 != 0, d6 == 0 */ tmp2 = MULTIPLY(d2, FIX_0_541196100); tmp3 = MULTIPLY(d2, FIX_1_306562965); tmp0 = (d0 + d4) << CONST_BITS; tmp1 = (d0 - d4) << CONST_BITS; tmp10 = tmp0 + tmp3; tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; } else { /* d0 != 0, d2 == 0, d4 != 0, d6 == 0 */ tmp10 = tmp13 = (d0 + d4) << CONST_BITS; tmp11 = tmp12 = (d0 - d4) << CONST_BITS; } } /* Odd part per figure 8; the matrix is unitary and hence its * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. */ if (d7) { if (d5) { if (d3) { if (d1) { /* d1 != 0, d3 != 0, d5 != 0, d7 != 0 */ z1 = d7 + d1; z2 = d5 + d3; z3 = d7 + d3; z4 = d5 + d1; z5 = MULTIPLY(z3 + z4, FIX_1_175875602); tmp0 = MULTIPLY(d7, FIX_0_298631336); tmp1 = MULTIPLY(d5, FIX_2_053119869); tmp2 = MULTIPLY(d3, FIX_3_072711026); tmp3 = MULTIPLY(d1, FIX_1_501321110); z1 = MULTIPLY(-z1, FIX_0_899976223); z2 = MULTIPLY(-z2, FIX_2_562915447); z3 = MULTIPLY(-z3, FIX_1_961570560); z4 = MULTIPLY(-z4, FIX_0_390180644); z3 += z5; z4 += z5; tmp0 += z1 + z3; tmp1 += z2 + z4; tmp2 += z2 + z3; tmp3 += z1 + z4; } else { /* d1 == 0, d3 != 0, d5 != 0, d7 != 0 */ z2 = d5 + d3; z3 = d7 + d3; z5 = MULTIPLY(z3 + d5, FIX_1_175875602); tmp0 = MULTIPLY(d7, FIX_0_298631336); tmp1 = MULTIPLY(d5, FIX_2_053119869); tmp2 = MULTIPLY(d3, FIX_3_072711026); z1 = MULTIPLY(-d7, FIX_0_899976223); z2 = MULTIPLY(-z2, FIX_2_562915447); z3 = MULTIPLY(-z3, FIX_1_961570560); z4 = MULTIPLY(-d5, FIX_0_390180644); z3 += z5; z4 += z5; tmp0 += z1 + z3; tmp1 += z2 + z4; tmp2 += z2 + z3; tmp3 = z1 + z4; } } else { if (d1) { /* d1 != 0, d3 == 0, d5 != 0, d7 != 0 */ z1 = d7 + d1; z3 = d7; z4 = d5 + d1; z5 = MULTIPLY(z3 + z4, FIX_1_175875602); tmp0 = MULTIPLY(d7, FIX_0_298631336); tmp1 = MULTIPLY(d5, FIX_2_053119869); tmp3 = MULTIPLY(d1, FIX_1_501321110); z1 = MULTIPLY(-z1, FIX_0_899976223); z2 = MULTIPLY(-d5, FIX_2_562915447); z3 = MULTIPLY(-d7, FIX_1_961570560); z4 = MULTIPLY(-z4, FIX_0_390180644); z3 += z5; z4 += z5; tmp0 += z1 + z3; tmp1 += z2 + z4; tmp2 = z2 + z3; tmp3 += z1 + z4; } else { /* d1 == 0, d3 == 0, d5 != 0, d7 != 0 */ tmp0 = MULTIPLY(-d7, FIX_0_601344887); z1 = MULTIPLY(-d7, FIX_0_899976223); z3 = MULTIPLY(-d7, FIX_1_961570560); tmp1 = MULTIPLY(-d5, FIX_0_509795579); z2 = MULTIPLY(-d5, FIX_2_562915447); z4 = MULTIPLY(-d5, FIX_0_390180644); z5 = MULTIPLY(d5 + d7, FIX_1_175875602); z3 += z5; z4 += z5; tmp0 += z3; tmp1 += z4; tmp2 = z2 + z3; tmp3 = z1 + z4; } } } else { if (d3) { if (d1) { /* d1 != 0, d3 != 0, d5 == 0, d7 != 0 */ z1 = d7 + d1; z3 = d7 + d3; z5 = MULTIPLY(z3 + d1, FIX_1_175875602); tmp0 = MULTIPLY(d7, FIX_0_298631336); tmp2 = MULTIPLY(d3, FIX_3_072711026); tmp3 = MULTIPLY(d1, FIX_1_501321110); z1 = MULTIPLY(-z1, FIX_0_899976223); z2 = MULTIPLY(-d3, FIX_2_562915447); z3 = MULTIPLY(-z3, FIX_1_961570560); z4 = MULTIPLY(-d1, FIX_0_390180644); z3 += z5; z4 += z5; tmp0 += z1 + z3; tmp1 = z2 + z4; tmp2 += z2 + z3; tmp3 += z1 + z4; } else { /* d1 == 0, d3 != 0, d5 == 0, d7 != 0 */ z3 = d7 + d3; tmp0 = MULTIPLY(-d7, FIX_0_601344887); z1 = MULTIPLY(-d7, FIX_0_899976223); tmp2 = MULTIPLY(d3, FIX_0_509795579); z2 = MULTIPLY(-d3, FIX_2_562915447); z5 = MULTIPLY(z3, FIX_1_175875602); z3 = MULTIPLY(-z3, FIX_0_785694958); tmp0 += z3; tmp1 = z2 + z5; tmp2 += z3; tmp3 = z1 + z5; } } else { if (d1) { /* d1 != 0, d3 == 0, d5 == 0, d7 != 0 */ z1 = d7 + d1; z5 = MULTIPLY(z1, FIX_1_175875602); z1 = MULTIPLY(z1, FIX_0_275899380); z3 = MULTIPLY(-d7, FIX_1_961570560); tmp0 = MULTIPLY(-d7, FIX_1_662939225); z4 = MULTIPLY(-d1, FIX_0_390180644); tmp3 = MULTIPLY(d1, FIX_1_111140466); tmp0 += z1; tmp1 = z4 + z5; tmp2 = z3 + z5; tmp3 += z1; } else { /* d1 == 0, d3 == 0, d5 == 0, d7 != 0 */ tmp0 = MULTIPLY(-d7, FIX_1_387039845); tmp1 = MULTIPLY(d7, FIX_1_175875602); tmp2 = MULTIPLY(-d7, FIX_0_785694958); tmp3 = MULTIPLY(d7, FIX_0_275899380); } } } } else { if (d5) { if (d3) { if (d1) { /* d1 != 0, d3 != 0, d5 != 0, d7 == 0 */ z2 = d5 + d3; z4 = d5 + d1; z5 = MULTIPLY(d3 + z4, FIX_1_175875602); tmp1 = MULTIPLY(d5, FIX_2_053119869); tmp2 = MULTIPLY(d3, FIX_3_072711026); tmp3 = MULTIPLY(d1, FIX_1_501321110); z1 = MULTIPLY(-d1, FIX_0_899976223); z2 = MULTIPLY(-z2, FIX_2_562915447); z3 = MULTIPLY(-d3, FIX_1_961570560); z4 = MULTIPLY(-z4, FIX_0_390180644); z3 += z5; z4 += z5; tmp0 = z1 + z3; tmp1 += z2 + z4; tmp2 += z2 + z3; tmp3 += z1 + z4; } else { /* d1 == 0, d3 != 0, d5 != 0, d7 == 0 */ z2 = d5 + d3; z5 = MULTIPLY(z2, FIX_1_175875602); tmp1 = MULTIPLY(d5, FIX_1_662939225); z4 = MULTIPLY(-d5, FIX_0_390180644); z2 = MULTIPLY(-z2, FIX_1_387039845); tmp2 = MULTIPLY(d3, FIX_1_111140466); z3 = MULTIPLY(-d3, FIX_1_961570560); tmp0 = z3 + z5; tmp1 += z2; tmp2 += z2; tmp3 = z4 + z5; } } else { if (d1) { /* d1 != 0, d3 == 0, d5 != 0, d7 == 0 */ z4 = d5 + d1; z5 = MULTIPLY(z4, FIX_1_175875602); z1 = MULTIPLY(-d1, FIX_0_899976223); tmp3 = MULTIPLY(d1, FIX_0_601344887); tmp1 = MULTIPLY(-d5, FIX_0_509795579); z2 = MULTIPLY(-d5, FIX_2_562915447); z4 = MULTIPLY(z4, FIX_0_785694958); tmp0 = z1 + z5; tmp1 += z4; tmp2 = z2 + z5; tmp3 += z4; } else { /* d1 == 0, d3 == 0, d5 != 0, d7 == 0 */ tmp0 = MULTIPLY(d5, FIX_1_175875602); tmp1 = MULTIPLY(d5, FIX_0_275899380); tmp2 = MULTIPLY(-d5, FIX_1_387039845); tmp3 = MULTIPLY(d5, FIX_0_785694958); } } } else { if (d3) { if (d1) { /* d1 != 0, d3 != 0, d5 == 0, d7 == 0 */ z5 = d1 + d3; tmp3 = MULTIPLY(d1, FIX_0_211164243); tmp2 = MULTIPLY(-d3, FIX_1_451774981); z1 = MULTIPLY(d1, FIX_1_061594337); z2 = MULTIPLY(-d3, FIX_2_172734803); z4 = MULTIPLY(z5, FIX_0_785694958); z5 = MULTIPLY(z5, FIX_1_175875602); tmp0 = z1 - z4; tmp1 = z2 + z4; tmp2 += z5; tmp3 += z5; } else { /* d1 == 0, d3 != 0, d5 == 0, d7 == 0 */ tmp0 = MULTIPLY(-d3, FIX_0_785694958); tmp1 = MULTIPLY(-d3, FIX_1_387039845); tmp2 = MULTIPLY(-d3, FIX_0_275899380); tmp3 = MULTIPLY(d3, FIX_1_175875602); } } else { if (d1) { /* d1 != 0, d3 == 0, d5 == 0, d7 == 0 */ tmp0 = MULTIPLY(d1, FIX_0_275899380); tmp1 = MULTIPLY(d1, FIX_0_785694958); tmp2 = MULTIPLY(d1, FIX_1_175875602); tmp3 = MULTIPLY(d1, FIX_1_387039845); } else { /* d1 == 0, d3 == 0, d5 == 0, d7 == 0 */ tmp0 = tmp1 = tmp2 = tmp3 = 0; } } } } /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp3, CONST_BITS+PASS1_BITS+3); dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp10 - tmp3, CONST_BITS+PASS1_BITS+3); dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp11 + tmp2, CONST_BITS+PASS1_BITS+3); dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(tmp11 - tmp2, CONST_BITS+PASS1_BITS+3); dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(tmp12 + tmp1, CONST_BITS+PASS1_BITS+3); dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12 - tmp1, CONST_BITS+PASS1_BITS+3); dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp13 + tmp0, CONST_BITS+PASS1_BITS+3); dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp13 - tmp0, CONST_BITS+PASS1_BITS+3); dataptr++; /* advance pointer to next column */ } } #undef DCTSIZE #define DCTSIZE 4 #define DCTSTRIDE 8 void j_rev_dct4(DCTBLOCK data) { int32_t tmp0, tmp1, tmp2, tmp3; int32_t tmp10, tmp11, tmp12, tmp13; int32_t z1; int32_t d0, d2, d4, d6; register DCTELEM *dataptr; int rowctr; /* Pass 1: process rows. */ /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ /* furthermore, we scale the results by 2**PASS1_BITS. */ data[0] += 4; dataptr = data; for (rowctr = DCTSIZE-1; rowctr >= 0; rowctr--) { /* Due to quantization, we will usually find that many of the input * coefficients are zero, especially the AC terms. We can exploit this * by short-circuiting the IDCT calculation for any row in which all * the AC terms are zero. In that case each output is equal to the * DC coefficient (with scale factor as needed). * With typical images and quantization tables, half or more of the * row DCT calculations can be simplified this way. */ register int *idataptr = (int*)dataptr; d0 = dataptr[0]; d2 = dataptr[1]; d4 = dataptr[2]; d6 = dataptr[3]; if ((d2 | d4 | d6) == 0) { /* AC terms all zero */ if (d0) { /* Compute a 32 bit value to assign. */ DCTELEM dcval = (DCTELEM) (d0 << PASS1_BITS); register int v = (dcval & 0xffff) | ((dcval << 16) & 0xffff0000); idataptr[0] = v; idataptr[1] = v; } dataptr += DCTSTRIDE; /* advance pointer to next row */ continue; } /* Even part: reverse the even part of the forward DCT. */ /* The rotator is sqrt(2)*c(-6). */ if (d6) { if (d2) { /* d0 != 0, d2 != 0, d4 != 0, d6 != 0 */ z1 = MULTIPLY(d2 + d6, FIX_0_541196100); tmp2 = z1 + MULTIPLY(-d6, FIX_1_847759065); tmp3 = z1 + MULTIPLY(d2, FIX_0_765366865); tmp0 = (d0 + d4) << CONST_BITS; tmp1 = (d0 - d4) << CONST_BITS; tmp10 = tmp0 + tmp3; tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; } else { /* d0 != 0, d2 == 0, d4 != 0, d6 != 0 */ tmp2 = MULTIPLY(-d6, FIX_1_306562965); tmp3 = MULTIPLY(d6, FIX_0_541196100); tmp0 = (d0 + d4) << CONST_BITS; tmp1 = (d0 - d4) << CONST_BITS; tmp10 = tmp0 + tmp3; tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; } } else { if (d2) { /* d0 != 0, d2 != 0, d4 != 0, d6 == 0 */ tmp2 = MULTIPLY(d2, FIX_0_541196100); tmp3 = MULTIPLY(d2, FIX_1_306562965); tmp0 = (d0 + d4) << CONST_BITS; tmp1 = (d0 - d4) << CONST_BITS; tmp10 = tmp0 + tmp3; tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; } else { /* d0 != 0, d2 == 0, d4 != 0, d6 == 0 */ tmp10 = tmp13 = (d0 + d4) << CONST_BITS; tmp11 = tmp12 = (d0 - d4) << CONST_BITS; } } /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ dataptr[0] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); dataptr[1] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); dataptr[2] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); dataptr[3] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); dataptr += DCTSTRIDE; /* advance pointer to next row */ } /* Pass 2: process columns. */ /* Note that we must descale the results by a factor of 8 == 2**3, */ /* and also undo the PASS1_BITS scaling. */ dataptr = data; for (rowctr = DCTSIZE-1; rowctr >= 0; rowctr--) { /* Columns of zeroes can be exploited in the same way as we did with rows. * However, the row calculation has created many nonzero AC terms, so the * simplification applies less often (typically 5% to 10% of the time). * On machines with very fast multiplication, it's possible that the * test takes more time than it's worth. In that case this section * may be commented out. */ d0 = dataptr[DCTSTRIDE*0]; d2 = dataptr[DCTSTRIDE*1]; d4 = dataptr[DCTSTRIDE*2]; d6 = dataptr[DCTSTRIDE*3]; /* Even part: reverse the even part of the forward DCT. */ /* The rotator is sqrt(2)*c(-6). */ if (d6) { if (d2) { /* d0 != 0, d2 != 0, d4 != 0, d6 != 0 */ z1 = MULTIPLY(d2 + d6, FIX_0_541196100); tmp2 = z1 + MULTIPLY(-d6, FIX_1_847759065); tmp3 = z1 + MULTIPLY(d2, FIX_0_765366865); tmp0 = (d0 + d4) << CONST_BITS; tmp1 = (d0 - d4) << CONST_BITS; tmp10 = tmp0 + tmp3; tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; } else { /* d0 != 0, d2 == 0, d4 != 0, d6 != 0 */ tmp2 = MULTIPLY(-d6, FIX_1_306562965); tmp3 = MULTIPLY(d6, FIX_0_541196100); tmp0 = (d0 + d4) << CONST_BITS; tmp1 = (d0 - d4) << CONST_BITS; tmp10 = tmp0 + tmp3; tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; } } else { if (d2) { /* d0 != 0, d2 != 0, d4 != 0, d6 == 0 */ tmp2 = MULTIPLY(d2, FIX_0_541196100); tmp3 = MULTIPLY(d2, FIX_1_306562965); tmp0 = (d0 + d4) << CONST_BITS; tmp1 = (d0 - d4) << CONST_BITS; tmp10 = tmp0 + tmp3; tmp13 = tmp0 - tmp3; tmp11 = tmp1 + tmp2; tmp12 = tmp1 - tmp2; } else { /* d0 != 0, d2 == 0, d4 != 0, d6 == 0 */ tmp10 = tmp13 = (d0 + d4) << CONST_BITS; tmp11 = tmp12 = (d0 - d4) << CONST_BITS; } } /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ dataptr[DCTSTRIDE*0] = tmp10 >> (CONST_BITS+PASS1_BITS+3); dataptr[DCTSTRIDE*1] = tmp11 >> (CONST_BITS+PASS1_BITS+3); dataptr[DCTSTRIDE*2] = tmp12 >> (CONST_BITS+PASS1_BITS+3); dataptr[DCTSTRIDE*3] = tmp13 >> (CONST_BITS+PASS1_BITS+3); dataptr++; /* advance pointer to next column */ } } void j_rev_dct2(DCTBLOCK data){ int d00, d01, d10, d11; data[0] += 4; d00 = data[0+0*DCTSTRIDE] + data[1+0*DCTSTRIDE]; d01 = data[0+0*DCTSTRIDE] - data[1+0*DCTSTRIDE]; d10 = data[0+1*DCTSTRIDE] + data[1+1*DCTSTRIDE]; d11 = data[0+1*DCTSTRIDE] - data[1+1*DCTSTRIDE]; data[0+0*DCTSTRIDE]= (d00 + d10)>>3; data[1+0*DCTSTRIDE]= (d01 + d11)>>3; data[0+1*DCTSTRIDE]= (d00 - d10)>>3; data[1+1*DCTSTRIDE]= (d01 - d11)>>3; } void j_rev_dct1(DCTBLOCK data){ data[0] = (data[0] + 4)>>3; } #undef FIX #undef CONST_BITS