Mercurial > libavcodec.hg
view x86/x86inc.asm @ 12475:9fef0a8ddd63 libavcodec
Move mm_support() from libavcodec to libavutil, make it a public
function and rename it to av_get_cpu_flags().
author | stefano |
---|---|
date | Wed, 08 Sep 2010 15:07:14 +0000 |
parents | bc13f76ecfbf |
children |
line wrap: on
line source
;***************************************************************************** ;* x86inc.asm ;***************************************************************************** ;* Copyright (C) 2005-2008 x264 project ;* ;* Authors: Loren Merritt <lorenm@u.washington.edu> ;* Anton Mitrofanov <BugMaster@narod.ru> ;* ;* Permission to use, copy, modify, and/or distribute this software for any ;* purpose with or without fee is hereby granted, provided that the above ;* copyright notice and this permission notice appear in all copies. ;* ;* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ;* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ;* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ;* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ;* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ;* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ;* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ;***************************************************************************** ; This is a header file for the x264ASM assembly language, which uses ; NASM/YASM syntax combined with a large number of macros to provide easy ; abstraction between different calling conventions (x86_32, win64, linux64). ; It also has various other useful features to simplify writing the kind of ; DSP functions that are most often used in x264. ; Unlike the rest of x264, this file is available under an ISC license, as it ; has significant usefulness outside of x264 and we want it to be available ; to the largest audience possible. Of course, if you modify it for your own ; purposes to add a new feature, we strongly encourage contributing a patch ; as this feature might be useful for others as well. Send patches or ideas ; to x264-devel@videolan.org . %define program_name ff %ifdef ARCH_X86_64 %ifidn __OUTPUT_FORMAT__,win32 %define WIN64 %else %define UNIX64 %endif %endif %ifdef PREFIX %define mangle(x) _ %+ x %else %define mangle(x) x %endif ; FIXME: All of the 64bit asm functions that take a stride as an argument ; via register, assume that the high dword of that register is filled with 0. ; This is true in practice (since we never do any 64bit arithmetic on strides, ; and x264's strides are all positive), but is not guaranteed by the ABI. ; Name of the .rodata section. ; Kludge: Something on OS X fails to align .rodata even given an align attribute, ; so use a different read-only section. %macro SECTION_RODATA 0-1 16 %ifidn __OUTPUT_FORMAT__,macho64 SECTION .text align=%1 %elifidn __OUTPUT_FORMAT__,macho SECTION .text align=%1 fakegot: %else SECTION .rodata align=%1 %endif %endmacro %ifdef WIN64 %define PIC %elifndef ARCH_X86_64 ; x86_32 doesn't require PIC. ; Some distros prefer shared objects to be PIC, but nothing breaks if ; the code contains a few textrels, so we'll skip that complexity. %undef PIC %endif %ifdef PIC default rel %endif ; Macros to eliminate most code duplication between x86_32 and x86_64: ; Currently this works only for leaf functions which load all their arguments ; into registers at the start, and make no other use of the stack. Luckily that ; covers most of x264's asm. ; PROLOGUE: ; %1 = number of arguments. loads them from stack if needed. ; %2 = number of registers used. pushes callee-saved regs if needed. ; %3 = number of xmm registers used. pushes callee-saved xmm regs if needed. ; %4 = list of names to define to registers ; PROLOGUE can also be invoked by adding the same options to cglobal ; e.g. ; cglobal foo, 2,3,0, dst, src, tmp ; declares a function (foo), taking two args (dst and src) and one local variable (tmp) ; TODO Some functions can use some args directly from the stack. If they're the ; last args then you can just not declare them, but if they're in the middle ; we need more flexible macro. ; RET: ; Pops anything that was pushed by PROLOGUE ; REP_RET: ; Same, but if it doesn't pop anything it becomes a 2-byte ret, for athlons ; which are slow when a normal ret follows a branch. ; registers: ; rN and rNq are the native-size register holding function argument N ; rNd, rNw, rNb are dword, word, and byte size ; rNm is the original location of arg N (a register or on the stack), dword ; rNmp is native size %macro DECLARE_REG 6 %define r%1q %2 %define r%1d %3 %define r%1w %4 %define r%1b %5 %define r%1m %6 %ifid %6 ; i.e. it's a register %define r%1mp %2 %elifdef ARCH_X86_64 ; memory %define r%1mp qword %6 %else %define r%1mp dword %6 %endif %define r%1 %2 %endmacro %macro DECLARE_REG_SIZE 2 %define r%1q r%1 %define e%1q r%1 %define r%1d e%1 %define e%1d e%1 %define r%1w %1 %define e%1w %1 %define r%1b %2 %define e%1b %2 %ifndef ARCH_X86_64 %define r%1 e%1 %endif %endmacro DECLARE_REG_SIZE ax, al DECLARE_REG_SIZE bx, bl DECLARE_REG_SIZE cx, cl DECLARE_REG_SIZE dx, dl DECLARE_REG_SIZE si, sil DECLARE_REG_SIZE di, dil DECLARE_REG_SIZE bp, bpl ; t# defines for when per-arch register allocation is more complex than just function arguments %macro DECLARE_REG_TMP 1-* %assign %%i 0 %rep %0 CAT_XDEFINE t, %%i, r%1 %assign %%i %%i+1 %rotate 1 %endrep %endmacro %macro DECLARE_REG_TMP_SIZE 0-* %rep %0 %define t%1q t%1 %+ q %define t%1d t%1 %+ d %define t%1w t%1 %+ w %define t%1b t%1 %+ b %rotate 1 %endrep %endmacro DECLARE_REG_TMP_SIZE 0,1,2,3,4,5,6,7,8,9 %ifdef ARCH_X86_64 %define gprsize 8 %else %define gprsize 4 %endif %macro PUSH 1 push %1 %assign stack_offset stack_offset+gprsize %endmacro %macro POP 1 pop %1 %assign stack_offset stack_offset-gprsize %endmacro %macro SUB 2 sub %1, %2 %ifidn %1, rsp %assign stack_offset stack_offset+(%2) %endif %endmacro %macro ADD 2 add %1, %2 %ifidn %1, rsp %assign stack_offset stack_offset-(%2) %endif %endmacro %macro movifnidn 2 %ifnidn %1, %2 mov %1, %2 %endif %endmacro %macro movsxdifnidn 2 %ifnidn %1, %2 movsxd %1, %2 %endif %endmacro %macro ASSERT 1 %if (%1) == 0 %error assert failed %endif %endmacro %macro DEFINE_ARGS 0-* %ifdef n_arg_names %assign %%i 0 %rep n_arg_names CAT_UNDEF arg_name %+ %%i, q CAT_UNDEF arg_name %+ %%i, d CAT_UNDEF arg_name %+ %%i, w CAT_UNDEF arg_name %+ %%i, b CAT_UNDEF arg_name %+ %%i, m CAT_UNDEF arg_name, %%i %assign %%i %%i+1 %endrep %endif %assign %%i 0 %rep %0 %xdefine %1q r %+ %%i %+ q %xdefine %1d r %+ %%i %+ d %xdefine %1w r %+ %%i %+ w %xdefine %1b r %+ %%i %+ b %xdefine %1m r %+ %%i %+ m CAT_XDEFINE arg_name, %%i, %1 %assign %%i %%i+1 %rotate 1 %endrep %assign n_arg_names %%i %endmacro %ifdef WIN64 ; Windows x64 ;================================================= DECLARE_REG 0, rcx, ecx, cx, cl, ecx DECLARE_REG 1, rdx, edx, dx, dl, edx DECLARE_REG 2, r8, r8d, r8w, r8b, r8d DECLARE_REG 3, r9, r9d, r9w, r9b, r9d DECLARE_REG 4, rdi, edi, di, dil, [rsp + stack_offset + 40] DECLARE_REG 5, rsi, esi, si, sil, [rsp + stack_offset + 48] DECLARE_REG 6, rax, eax, ax, al, [rsp + stack_offset + 56] %define r7m [rsp + stack_offset + 64] %define r8m [rsp + stack_offset + 72] %macro LOAD_IF_USED 2 ; reg_id, number_of_args %if %1 < %2 mov r%1, [rsp + stack_offset + 8 + %1*8] %endif %endmacro %macro PROLOGUE 2-4+ 0 ; #args, #regs, #xmm_regs, arg_names... ASSERT %2 >= %1 %assign regs_used %2 ASSERT regs_used <= 7 %if regs_used > 4 push r4 push r5 %assign stack_offset stack_offset+16 %endif WIN64_SPILL_XMM %3 LOAD_IF_USED 4, %1 LOAD_IF_USED 5, %1 LOAD_IF_USED 6, %1 DEFINE_ARGS %4 %endmacro %macro WIN64_SPILL_XMM 1 %assign xmm_regs_used %1 ASSERT xmm_regs_used <= 16 %if xmm_regs_used > 6 sub rsp, (xmm_regs_used-6)*16+16 %assign stack_offset stack_offset+(xmm_regs_used-6)*16+16 %assign %%i xmm_regs_used %rep (xmm_regs_used-6) %assign %%i %%i-1 movdqa [rsp + (%%i-6)*16+8], xmm %+ %%i %endrep %endif %endmacro %macro WIN64_RESTORE_XMM_INTERNAL 1 %if xmm_regs_used > 6 %assign %%i xmm_regs_used %rep (xmm_regs_used-6) %assign %%i %%i-1 movdqa xmm %+ %%i, [%1 + (%%i-6)*16+8] %endrep add %1, (xmm_regs_used-6)*16+16 %endif %endmacro %macro WIN64_RESTORE_XMM 1 WIN64_RESTORE_XMM_INTERNAL %1 %assign stack_offset stack_offset-(xmm_regs_used-6)*16+16 %assign xmm_regs_used 0 %endmacro %macro RET 0 WIN64_RESTORE_XMM_INTERNAL rsp %if regs_used > 4 pop r5 pop r4 %endif ret %endmacro %macro REP_RET 0 %if regs_used > 4 || xmm_regs_used > 6 RET %else rep ret %endif %endmacro %elifdef ARCH_X86_64 ; *nix x64 ;============================================= DECLARE_REG 0, rdi, edi, di, dil, edi DECLARE_REG 1, rsi, esi, si, sil, esi DECLARE_REG 2, rdx, edx, dx, dl, edx DECLARE_REG 3, rcx, ecx, cx, cl, ecx DECLARE_REG 4, r8, r8d, r8w, r8b, r8d DECLARE_REG 5, r9, r9d, r9w, r9b, r9d DECLARE_REG 6, rax, eax, ax, al, [rsp + stack_offset + 8] %define r7m [rsp + stack_offset + 16] %define r8m [rsp + stack_offset + 24] %macro LOAD_IF_USED 2 ; reg_id, number_of_args %if %1 < %2 mov r%1, [rsp - 40 + %1*8] %endif %endmacro %macro PROLOGUE 2-4+ ; #args, #regs, #xmm_regs, arg_names... ASSERT %2 >= %1 ASSERT %2 <= 7 LOAD_IF_USED 6, %1 DEFINE_ARGS %4 %endmacro %macro RET 0 ret %endmacro %macro REP_RET 0 rep ret %endmacro %else ; X86_32 ;============================================================== DECLARE_REG 0, eax, eax, ax, al, [esp + stack_offset + 4] DECLARE_REG 1, ecx, ecx, cx, cl, [esp + stack_offset + 8] DECLARE_REG 2, edx, edx, dx, dl, [esp + stack_offset + 12] DECLARE_REG 3, ebx, ebx, bx, bl, [esp + stack_offset + 16] DECLARE_REG 4, esi, esi, si, null, [esp + stack_offset + 20] DECLARE_REG 5, edi, edi, di, null, [esp + stack_offset + 24] DECLARE_REG 6, ebp, ebp, bp, null, [esp + stack_offset + 28] %define r7m [esp + stack_offset + 32] %define r8m [esp + stack_offset + 36] %define rsp esp %macro PUSH_IF_USED 1 ; reg_id %if %1 < regs_used push r%1 %assign stack_offset stack_offset+4 %endif %endmacro %macro POP_IF_USED 1 ; reg_id %if %1 < regs_used pop r%1 %endif %endmacro %macro LOAD_IF_USED 2 ; reg_id, number_of_args %if %1 < %2 mov r%1, [esp + stack_offset + 4 + %1*4] %endif %endmacro %macro PROLOGUE 2-4+ ; #args, #regs, #xmm_regs, arg_names... ASSERT %2 >= %1 %assign regs_used %2 ASSERT regs_used <= 7 PUSH_IF_USED 3 PUSH_IF_USED 4 PUSH_IF_USED 5 PUSH_IF_USED 6 LOAD_IF_USED 0, %1 LOAD_IF_USED 1, %1 LOAD_IF_USED 2, %1 LOAD_IF_USED 3, %1 LOAD_IF_USED 4, %1 LOAD_IF_USED 5, %1 LOAD_IF_USED 6, %1 DEFINE_ARGS %4 %endmacro %macro RET 0 POP_IF_USED 6 POP_IF_USED 5 POP_IF_USED 4 POP_IF_USED 3 ret %endmacro %macro REP_RET 0 %if regs_used > 3 RET %else rep ret %endif %endmacro %endif ;====================================================================== %ifndef WIN64 %macro WIN64_SPILL_XMM 1 %endmacro %macro WIN64_RESTORE_XMM 1 %endmacro %endif ;============================================================================= ; arch-independent part ;============================================================================= %assign function_align 16 ; Symbol prefix for C linkage %macro cglobal 1-2+ %xdefine %1 mangle(program_name %+ _ %+ %1) %xdefine %1.skip_prologue %1 %+ .skip_prologue %ifidn __OUTPUT_FORMAT__,elf global %1:function hidden %else global %1 %endif align function_align %1: RESET_MM_PERMUTATION ; not really needed, but makes disassembly somewhat nicer %assign stack_offset 0 %if %0 > 1 PROLOGUE %2 %endif %endmacro %macro cextern 1 %xdefine %1 mangle(program_name %+ _ %+ %1) extern %1 %endmacro ;like cextern, but without the prefix %macro cextern_naked 1 %xdefine %1 mangle(%1) extern %1 %endmacro %macro const 2+ %xdefine %1 mangle(program_name %+ _ %+ %1) global %1 %1: %2 %endmacro ; This is needed for ELF, otherwise the GNU linker assumes the stack is ; executable by default. %ifidn __OUTPUT_FORMAT__,elf SECTION .note.GNU-stack noalloc noexec nowrite progbits %endif ; merge mmx and sse* %macro CAT_XDEFINE 3 %xdefine %1%2 %3 %endmacro %macro CAT_UNDEF 2 %undef %1%2 %endmacro %macro INIT_MMX 0 %define RESET_MM_PERMUTATION INIT_MMX %define mmsize 8 %define num_mmregs 8 %define mova movq %define movu movq %define movh movd %define movnta movntq %assign %%i 0 %rep 8 CAT_XDEFINE m, %%i, mm %+ %%i CAT_XDEFINE nmm, %%i, %%i %assign %%i %%i+1 %endrep %rep 8 CAT_UNDEF m, %%i CAT_UNDEF nmm, %%i %assign %%i %%i+1 %endrep %endmacro %macro INIT_XMM 0 %define RESET_MM_PERMUTATION INIT_XMM %define mmsize 16 %define num_mmregs 8 %ifdef ARCH_X86_64 %define num_mmregs 16 %endif %define mova movdqa %define movu movdqu %define movh movq %define movnta movntdq %assign %%i 0 %rep num_mmregs CAT_XDEFINE m, %%i, xmm %+ %%i CAT_XDEFINE nxmm, %%i, %%i %assign %%i %%i+1 %endrep %endmacro INIT_MMX ; I often want to use macros that permute their arguments. e.g. there's no ; efficient way to implement butterfly or transpose or dct without swapping some ; arguments. ; ; I would like to not have to manually keep track of the permutations: ; If I insert a permutation in the middle of a function, it should automatically ; change everything that follows. For more complex macros I may also have multiple ; implementations, e.g. the SSE2 and SSSE3 versions may have different permutations. ; ; Hence these macros. Insert a PERMUTE or some SWAPs at the end of a macro that ; permutes its arguments. It's equivalent to exchanging the contents of the ; registers, except that this way you exchange the register names instead, so it ; doesn't cost any cycles. %macro PERMUTE 2-* ; takes a list of pairs to swap %rep %0/2 %xdefine tmp%2 m%2 %xdefine ntmp%2 nm%2 %rotate 2 %endrep %rep %0/2 %xdefine m%1 tmp%2 %xdefine nm%1 ntmp%2 %undef tmp%2 %undef ntmp%2 %rotate 2 %endrep %endmacro %macro SWAP 2-* ; swaps a single chain (sometimes more concise than pairs) %rep %0-1 %ifdef m%1 %xdefine tmp m%1 %xdefine m%1 m%2 %xdefine m%2 tmp CAT_XDEFINE n, m%1, %1 CAT_XDEFINE n, m%2, %2 %else ; If we were called as "SWAP m0,m1" rather than "SWAP 0,1" infer the original numbers here. ; Be careful using this mode in nested macros though, as in some cases there may be ; other copies of m# that have already been dereferenced and don't get updated correctly. %xdefine %%n1 n %+ %1 %xdefine %%n2 n %+ %2 %xdefine tmp m %+ %%n1 CAT_XDEFINE m, %%n1, m %+ %%n2 CAT_XDEFINE m, %%n2, tmp CAT_XDEFINE n, m %+ %%n1, %%n1 CAT_XDEFINE n, m %+ %%n2, %%n2 %endif %undef tmp %rotate 1 %endrep %endmacro ; If SAVE_MM_PERMUTATION is placed at the end of a function and given the ; function name, then any later calls to that function will automatically ; load the permutation, so values can be returned in mmregs. %macro SAVE_MM_PERMUTATION 1 ; name to save as %assign %%i 0 %rep num_mmregs CAT_XDEFINE %1_m, %%i, m %+ %%i %assign %%i %%i+1 %endrep %endmacro %macro LOAD_MM_PERMUTATION 1 ; name to load from %assign %%i 0 %rep num_mmregs CAT_XDEFINE m, %%i, %1_m %+ %%i CAT_XDEFINE n, m %+ %%i, %%i %assign %%i %%i+1 %endrep %endmacro %macro call 1 call %1 %ifdef %1_m0 LOAD_MM_PERMUTATION %1 %endif %endmacro ; Substitutions that reduce instruction size but are functionally equivalent %macro add 2 %ifnum %2 %if %2==128 sub %1, -128 %else add %1, %2 %endif %else add %1, %2 %endif %endmacro %macro sub 2 %ifnum %2 %if %2==128 add %1, -128 %else sub %1, %2 %endif %else sub %1, %2 %endif %endmacro