view x86/lpc_mmx.c @ 12408:ae72506d4c2a libavcodec

acenc: LAME-inspired window decision This performs quite a bit better than the current 3GPP-inspired window decision on all the samples I have tested. On the castanets.wav sample it performs very similar to iTunes window selection, and seems to perform better than Nero. On fatboy.wav, it seems to perform at least as good as iTunes, if not better. Nero performs horribly on this sample. Patch by: Nathan Caldwell <[e-mail]>

/*
 * MMX optimized LPC DSP utils
 * Copyright (c) 2007 Loren Merritt
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

#include "libavutil/x86_cpu.h"
#include "dsputil_mmx.h"

static void apply_welch_window_sse2(const int32_t *data, int len, double *w_data)
{
    double c = 2.0 / (len-1.0);
    int n2 = len>>1;
    x86_reg i = -n2*sizeof(int32_t);
    x86_reg j =  n2*sizeof(int32_t);
    __asm__ volatile(
        "movsd   %0,     %%xmm7                \n\t"
        "movapd  "MANGLE(ff_pd_1)", %%xmm6     \n\t"
        "movapd  "MANGLE(ff_pd_2)", %%xmm5     \n\t"
        "movlhps %%xmm7, %%xmm7                \n\t"
        "subpd   %%xmm5, %%xmm7                \n\t"
        "addsd   %%xmm6, %%xmm7                \n\t"
        ::"m"(c)
    );
#define WELCH(MOVPD, offset)\
    __asm__ volatile(\
        "1:                                    \n\t"\
        "movapd   %%xmm7,  %%xmm1              \n\t"\
        "mulpd    %%xmm1,  %%xmm1              \n\t"\
        "movapd   %%xmm6,  %%xmm0              \n\t"\
        "subpd    %%xmm1,  %%xmm0              \n\t"\
        "pshufd   $0x4e,   %%xmm0, %%xmm1      \n\t"\
        "cvtpi2pd (%3,%0), %%xmm2              \n\t"\
        "cvtpi2pd "#offset"*4(%3,%1), %%xmm3   \n\t"\
        "mulpd    %%xmm0,  %%xmm2              \n\t"\
        "mulpd    %%xmm1,  %%xmm3              \n\t"\
        "movapd   %%xmm2, (%2,%0,2)            \n\t"\
        MOVPD"    %%xmm3, "#offset"*8(%2,%1,2) \n\t"\
        "subpd    %%xmm5,  %%xmm7              \n\t"\
        "sub      $8,      %1                  \n\t"\
        "add      $8,      %0                  \n\t"\
        "jl 1b                                 \n\t"\
        :"+&r"(i), "+&r"(j)\
        :"r"(w_data+n2), "r"(data+n2)\
    );
    if(len&1)
        WELCH("movupd", -1)
    else
        WELCH("movapd", -2)
#undef WELCH
}

void ff_lpc_compute_autocorr_sse2(const int32_t *data, int len, int lag,
                                   double *autoc)
{
    double tmp[len + lag + 2];
    double *data1 = tmp + lag;
    int j;

    if((x86_reg)data1 & 15)
        data1++;

    apply_welch_window_sse2(data, len, data1);

    for(j=0; j<lag; j++)
        data1[j-lag]= 0.0;
    data1[len] = 0.0;

    for(j=0; j<lag; j+=2){
        x86_reg i = -len*sizeof(double);
        if(j == lag-2) {
            __asm__ volatile(
                "movsd    "MANGLE(ff_pd_1)", %%xmm0 \n\t"
                "movsd    "MANGLE(ff_pd_1)", %%xmm1 \n\t"
                "movsd    "MANGLE(ff_pd_1)", %%xmm2 \n\t"
                "1:                                 \n\t"
                "movapd   (%2,%0), %%xmm3           \n\t"
                "movupd -8(%3,%0), %%xmm4           \n\t"
                "movapd   (%3,%0), %%xmm5           \n\t"
                "mulpd     %%xmm3, %%xmm4           \n\t"
                "mulpd     %%xmm3, %%xmm5           \n\t"
                "mulpd -16(%3,%0), %%xmm3           \n\t"
                "addpd     %%xmm4, %%xmm1           \n\t"
                "addpd     %%xmm5, %%xmm0           \n\t"
                "addpd     %%xmm3, %%xmm2           \n\t"
                "add       $16,    %0               \n\t"
                "jl 1b                              \n\t"
                "movhlps   %%xmm0, %%xmm3           \n\t"
                "movhlps   %%xmm1, %%xmm4           \n\t"
                "movhlps   %%xmm2, %%xmm5           \n\t"
                "addsd     %%xmm3, %%xmm0           \n\t"
                "addsd     %%xmm4, %%xmm1           \n\t"
                "addsd     %%xmm5, %%xmm2           \n\t"
                "movsd     %%xmm0,   (%1)           \n\t"
                "movsd     %%xmm1,  8(%1)           \n\t"
                "movsd     %%xmm2, 16(%1)           \n\t"
                :"+&r"(i)
                :"r"(autoc+j), "r"(data1+len), "r"(data1+len-j)
                :"memory"
            );
        } else {
            __asm__ volatile(
                "movsd    "MANGLE(ff_pd_1)", %%xmm0 \n\t"
                "movsd    "MANGLE(ff_pd_1)", %%xmm1 \n\t"
                "1:                                 \n\t"
                "movapd   (%3,%0), %%xmm3           \n\t"
                "movupd -8(%4,%0), %%xmm4           \n\t"
                "mulpd     %%xmm3, %%xmm4           \n\t"
                "mulpd    (%4,%0), %%xmm3           \n\t"
                "addpd     %%xmm4, %%xmm1           \n\t"
                "addpd     %%xmm3, %%xmm0           \n\t"
                "add       $16,    %0               \n\t"
                "jl 1b                              \n\t"
                "movhlps   %%xmm0, %%xmm3           \n\t"
                "movhlps   %%xmm1, %%xmm4           \n\t"
                "addsd     %%xmm3, %%xmm0           \n\t"
                "addsd     %%xmm4, %%xmm1           \n\t"
                "movsd     %%xmm0, %1               \n\t"
                "movsd     %%xmm1, %2               \n\t"
                :"+&r"(i), "=m"(autoc[j]), "=m"(autoc[j+1])
                :"r"(data1+len), "r"(data1+len-j)
            );
        }
    }
}