view armv4l/mpegvideo_armv5te.c @ 7352:c2318e551ff5 libavcodec

When picking a "high utility centroid" do not pick one that has no corresponding points. Not only it is the worst possible pick, but also the code was written without this case in mind.

/*
 * Optimization of some functions from mpegvideo.c for armv5te
 * Copyright (c) 2007 Siarhei Siamashka <[e-mail]>
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

#include "libavcodec/avcodec.h"
#include "libavcodec/dsputil.h"
#include "libavcodec/mpegvideo.h"


#ifdef ENABLE_ARM_TESTS
/**
 * h263 dequantizer supplementary function, it is performance critical and needs to
 * have optimized implementations for each architecture. Is also used as a reference
 * implementation in regression tests
 */
static inline void dct_unquantize_h263_helper_c(DCTELEM *block, int qmul, int qadd, int count)
{
    int i, level;
    for (i = 0; i < count; i++) {
        level = block[i];
        if (level) {
            if (level < 0) {
                level = level * qmul - qadd;
            } else {
                level = level * qmul + qadd;
            }
            block[i] = level;
        }
    }
}
#endif

/* GCC 3.1 or higher is required to support symbolic names in assembly code */
#if (__GNUC__ > 3) || ((__GNUC__ == 3) && (__GNUC_MINOR__ >= 1))

/**
 * Special optimized version of dct_unquantize_h263_helper_c, it requires the block
 * to be at least 8 bytes aligned, and may process more elements than requested.
 * But it is guaranteed to never process more than 64 elements provided that
 * xxcount argument is <= 64, so it is safe. This macro is optimized for a common
 * distribution of values for nCoeffs (they are mostly multiple of 8 plus one or
 * two extra elements). So this macro processes data as 8 elements per loop iteration
 * and contains optional 2 elements processing in the end.
 *
 * Inner loop should take 6 cycles per element on arm926ej-s (Nokia 770)
 */
#define dct_unquantize_h263_special_helper_armv5te(xxblock, xxqmul, xxqadd, xxcount) \
({ DCTELEM *xblock = xxblock; \
   int xqmul = xxqmul, xqadd = xxqadd, xcount = xxcount, xtmp; \
   int xdata1, xdata2; \
asm volatile( \
        "subs %[count], %[count], #2       \n\t" \
        "ble 2f                            \n\t" \
        "ldrd r4, [%[block], #0]           \n\t" \
        "1:                                \n\t" \
        "ldrd r6, [%[block], #8]           \n\t" \
\
        "rsbs %[data1], %[zero], r4, asr #16 \n\t" \
        "addgt %[data1], %[qadd], #0       \n\t" \
        "rsblt %[data1], %[qadd], #0       \n\t" \
        "smlatbne %[data1], r4, %[qmul], %[data1] \n\t" \
\
        "rsbs %[data2], %[zero], r5, asr #16 \n\t" \
        "addgt %[data2], %[qadd], #0       \n\t" \
        "rsblt %[data2], %[qadd], #0       \n\t" \
        "smlatbne %[data2], r5, %[qmul], %[data2] \n\t" \
\
        "rsbs %[tmp], %[zero], r4, asl #16 \n\t" \
        "addgt %[tmp], %[qadd], #0         \n\t" \
        "rsblt %[tmp], %[qadd], #0         \n\t" \
        "smlabbne r4, r4, %[qmul], %[tmp]  \n\t" \
\
        "rsbs %[tmp], %[zero], r5, asl #16 \n\t" \
        "addgt %[tmp], %[qadd], #0         \n\t" \
        "rsblt %[tmp], %[qadd], #0         \n\t" \
        "smlabbne r5, r5, %[qmul], %[tmp]  \n\t" \
\
        "strh r4, [%[block]], #2           \n\t" \
        "strh %[data1], [%[block]], #2     \n\t" \
        "strh r5, [%[block]], #2           \n\t" \
        "strh %[data2], [%[block]], #2     \n\t" \
\
        "rsbs %[data1], %[zero], r6, asr #16 \n\t" \
        "addgt %[data1], %[qadd], #0        \n\t" \
        "rsblt %[data1], %[qadd], #0        \n\t" \
        "smlatbne %[data1], r6, %[qmul], %[data1] \n\t" \
\
        "rsbs %[data2], %[zero], r7, asr #16 \n\t" \
        "addgt %[data2], %[qadd], #0        \n\t" \
        "rsblt %[data2], %[qadd], #0        \n\t" \
        "smlatbne %[data2], r7, %[qmul], %[data2] \n\t" \
\
        "rsbs %[tmp], %[zero], r6, asl #16  \n\t" \
        "addgt %[tmp], %[qadd], #0          \n\t" \
        "rsblt %[tmp], %[qadd], #0          \n\t" \
        "smlabbne r6, r6, %[qmul], %[tmp]   \n\t" \
\
        "rsbs %[tmp], %[zero], r7, asl #16  \n\t" \
        "addgt %[tmp], %[qadd], #0          \n\t" \
        "rsblt %[tmp], %[qadd], #0          \n\t" \
        "smlabbne r7, r7, %[qmul], %[tmp]   \n\t" \
\
        "strh r6, [%[block]], #2            \n\t" \
        "strh %[data1], [%[block]], #2      \n\t" \
        "strh r7, [%[block]], #2            \n\t" \
        "strh %[data2], [%[block]], #2      \n\t" \
\
        "subs %[count], %[count], #8        \n\t" \
        "ldrgtd r4, [%[block], #0]          \n\t" /* load data early to avoid load/use pipeline stall */ \
        "bgt 1b                             \n\t" \
\
        "adds %[count], %[count], #2        \n\t" \
        "ble  3f                            \n\t" \
        "2:                                 \n\t" \
        "ldrsh %[data1], [%[block], #0]     \n\t" \
        "ldrsh %[data2], [%[block], #2]     \n\t" \
        "mov  %[tmp], %[qadd]               \n\t" \
        "cmp  %[data1], #0                  \n\t" \
        "rsblt %[tmp], %[qadd], #0          \n\t" \
        "smlabbne %[data1], %[data1], %[qmul], %[tmp] \n\t" \
        "mov  %[tmp], %[qadd]               \n\t" \
        "cmp  %[data2], #0                  \n\t" \
        "rsblt %[tmp], %[qadd], #0          \n\t" \
        "smlabbne %[data2], %[data2], %[qmul], %[tmp] \n\t" \
        "strh %[data1], [%[block]], #2      \n\t" \
        "strh %[data2], [%[block]], #2      \n\t" \
        "3:                                 \n\t" \
        : [block] "+&r" (xblock), [count] "+&r" (xcount), [tmp] "=&r" (xtmp), \
          [data1] "=&r" (xdata1), [data2] "=&r" (xdata2)  \
        : [qmul] "r" (xqmul), [qadd] "r" (xqadd), [zero] "r" (0) \
        : "r4", "r5", "r6", "r7", "cc", "memory" \
); \
})

static void dct_unquantize_h263_intra_armv5te(MpegEncContext *s,
                                  DCTELEM *block, int n, int qscale)
{
    int level, qmul, qadd;
    int nCoeffs;

    assert(s->block_last_index[n]>=0);

    qmul = qscale << 1;

    if (!s->h263_aic) {
        if (n < 4)
            level = block[0] * s->y_dc_scale;
        else
            level = block[0] * s->c_dc_scale;
        qadd = (qscale - 1) | 1;
    }else{
        qadd = 0;
        level = block[0];
    }
    if(s->ac_pred)
        nCoeffs=63;
    else
        nCoeffs= s->inter_scantable.raster_end[ s->block_last_index[n] ];

    dct_unquantize_h263_special_helper_armv5te(block, qmul, qadd, nCoeffs + 1);
    block[0] = level;
}

static void dct_unquantize_h263_inter_armv5te(MpegEncContext *s,
                                  DCTELEM *block, int n, int qscale)
{
    int qmul, qadd;
    int nCoeffs;

    assert(s->block_last_index[n]>=0);

    qadd = (qscale - 1) | 1;
    qmul = qscale << 1;

    nCoeffs= s->inter_scantable.raster_end[ s->block_last_index[n] ];

    dct_unquantize_h263_special_helper_armv5te(block, qmul, qadd, nCoeffs + 1);
}

#define HAVE_DCT_UNQUANTIZE_H263_ARMV5TE_OPTIMIZED

#endif

void MPV_common_init_armv5te(MpegEncContext *s)
{
#ifdef HAVE_DCT_UNQUANTIZE_H263_ARMV5TE_OPTIMIZED
    s->dct_unquantize_h263_intra = dct_unquantize_h263_intra_armv5te;
    s->dct_unquantize_h263_inter = dct_unquantize_h263_inter_armv5te;
#endif
}