Mercurial > libavcodec.hg
view ppc/dsputil_ppc.c @ 8990:cc8f95accbff libavcodec
Fixing a value returning issue
author | romansh |
---|---|
date | Fri, 20 Feb 2009 02:00:44 +0000 |
parents | 13b6cdf7895e |
children | 5b68d22e5ec9 |
line wrap: on
line source
/* * Copyright (c) 2002 Brian Foley * Copyright (c) 2002 Dieter Shirley * Copyright (c) 2003-2004 Romain Dolbeau <romain@dolbeau.org> * * This file is part of FFmpeg. * * FFmpeg is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * FFmpeg is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with FFmpeg; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #include "libavcodec/dsputil.h" #include "dsputil_ppc.h" #include "dsputil_altivec.h" void fdct_altivec(int16_t *block); void gmc1_altivec(uint8_t *dst, uint8_t *src, int stride, int h, int x16, int y16, int rounder); void idct_put_altivec(uint8_t *dest, int line_size, int16_t *block); void idct_add_altivec(uint8_t *dest, int line_size, int16_t *block); void dsputil_h264_init_ppc(DSPContext* c, AVCodecContext *avctx); void dsputil_init_altivec(DSPContext* c, AVCodecContext *avctx); void vc1dsp_init_altivec(DSPContext* c, AVCodecContext *avctx); void snow_init_altivec(DSPContext* c, AVCodecContext *avctx); void float_init_altivec(DSPContext* c, AVCodecContext *avctx); void int_init_altivec(DSPContext* c, AVCodecContext *avctx); int mm_flags = 0; int mm_support(void) { int result = 0; #if HAVE_ALTIVEC if (has_altivec()) { result |= FF_MM_ALTIVEC; } #endif /* result */ return result; } #if CONFIG_POWERPC_PERF unsigned long long perfdata[POWERPC_NUM_PMC_ENABLED][powerpc_perf_total][powerpc_data_total]; /* list below must match enum in dsputil_ppc.h */ static unsigned char* perfname[] = { "ff_fft_calc_altivec", "gmc1_altivec", "dct_unquantize_h263_altivec", "fdct_altivec", "idct_add_altivec", "idct_put_altivec", "put_pixels16_altivec", "avg_pixels16_altivec", "avg_pixels8_altivec", "put_pixels8_xy2_altivec", "put_no_rnd_pixels8_xy2_altivec", "put_pixels16_xy2_altivec", "put_no_rnd_pixels16_xy2_altivec", "hadamard8_diff8x8_altivec", "hadamard8_diff16_altivec", "avg_pixels8_xy2_altivec", "clear_blocks_dcbz32_ppc", "clear_blocks_dcbz128_ppc", "put_h264_chroma_mc8_altivec", "avg_h264_chroma_mc8_altivec", "put_h264_qpel16_h_lowpass_altivec", "avg_h264_qpel16_h_lowpass_altivec", "put_h264_qpel16_v_lowpass_altivec", "avg_h264_qpel16_v_lowpass_altivec", "put_h264_qpel16_hv_lowpass_altivec", "avg_h264_qpel16_hv_lowpass_altivec", "" }; #include <stdio.h> #endif #if CONFIG_POWERPC_PERF void powerpc_display_perf_report(void) { int i, j; av_log(NULL, AV_LOG_INFO, "PowerPC performance report\n Values are from the PMC registers, and represent whatever the registers are set to record.\n"); for(i = 0 ; i < powerpc_perf_total ; i++) { for (j = 0; j < POWERPC_NUM_PMC_ENABLED ; j++) { if (perfdata[j][i][powerpc_data_num] != (unsigned long long)0) av_log(NULL, AV_LOG_INFO, " Function \"%s\" (pmc%d):\n\tmin: %"PRIu64"\n\tmax: %"PRIu64"\n\tavg: %1.2lf (%"PRIu64")\n", perfname[i], j+1, perfdata[j][i][powerpc_data_min], perfdata[j][i][powerpc_data_max], (double)perfdata[j][i][powerpc_data_sum] / (double)perfdata[j][i][powerpc_data_num], perfdata[j][i][powerpc_data_num]); } } } #endif /* CONFIG_POWERPC_PERF */ /* ***** WARNING ***** WARNING ***** WARNING ***** */ /* clear_blocks_dcbz32_ppc will not work properly on PowerPC processors with a cache line size not equal to 32 bytes. Fortunately all processor used by Apple up to at least the 7450 (aka second generation G4) use 32 bytes cache line. This is due to the use of the 'dcbz' instruction. It simply clear to zero a single cache line, so you need to know the cache line size to use it ! It's absurd, but it's fast... update 24/06/2003 : Apple released yesterday the G5, with a PPC970. cache line size: 128 bytes. Oups. The semantic of dcbz was changed, it always clear 32 bytes. so the function below will work, but will be slow. So I fixed check_dcbz_effect to use dcbzl, which is defined to clear a cache line (as dcbz before). So we still can distinguish, and use dcbz (32 bytes) or dcbzl (one cache line) as required. see <http://developer.apple.com/technotes/tn/tn2087.html> and <http://developer.apple.com/technotes/tn/tn2086.html> */ void clear_blocks_dcbz32_ppc(DCTELEM *blocks) { POWERPC_PERF_DECLARE(powerpc_clear_blocks_dcbz32, 1); register int misal = ((unsigned long)blocks & 0x00000010); register int i = 0; POWERPC_PERF_START_COUNT(powerpc_clear_blocks_dcbz32, 1); #if 1 if (misal) { ((unsigned long*)blocks)[0] = 0L; ((unsigned long*)blocks)[1] = 0L; ((unsigned long*)blocks)[2] = 0L; ((unsigned long*)blocks)[3] = 0L; i += 16; } for ( ; i < sizeof(DCTELEM)*6*64-31 ; i += 32) { __asm__ volatile("dcbz %0,%1" : : "b" (blocks), "r" (i) : "memory"); } if (misal) { ((unsigned long*)blocks)[188] = 0L; ((unsigned long*)blocks)[189] = 0L; ((unsigned long*)blocks)[190] = 0L; ((unsigned long*)blocks)[191] = 0L; i += 16; } #else memset(blocks, 0, sizeof(DCTELEM)*6*64); #endif POWERPC_PERF_STOP_COUNT(powerpc_clear_blocks_dcbz32, 1); } /* same as above, when dcbzl clear a whole 128B cache line i.e. the PPC970 aka G5 */ #if HAVE_DCBZL void clear_blocks_dcbz128_ppc(DCTELEM *blocks) { POWERPC_PERF_DECLARE(powerpc_clear_blocks_dcbz128, 1); register int misal = ((unsigned long)blocks & 0x0000007f); register int i = 0; POWERPC_PERF_START_COUNT(powerpc_clear_blocks_dcbz128, 1); #if 1 if (misal) { // we could probably also optimize this case, // but there's not much point as the machines // aren't available yet (2003-06-26) memset(blocks, 0, sizeof(DCTELEM)*6*64); } else for ( ; i < sizeof(DCTELEM)*6*64 ; i += 128) { __asm__ volatile("dcbzl %0,%1" : : "b" (blocks), "r" (i) : "memory"); } #else memset(blocks, 0, sizeof(DCTELEM)*6*64); #endif POWERPC_PERF_STOP_COUNT(powerpc_clear_blocks_dcbz128, 1); } #else void clear_blocks_dcbz128_ppc(DCTELEM *blocks) { memset(blocks, 0, sizeof(DCTELEM)*6*64); } #endif #if HAVE_DCBZL /* check dcbz report how many bytes are set to 0 by dcbz */ /* update 24/06/2003 : replace dcbz by dcbzl to get the intended effect (Apple "fixed" dcbz) unfortunately this cannot be used unless the assembler knows about dcbzl ... */ long check_dcbzl_effect(void) { register char *fakedata = av_malloc(1024); register char *fakedata_middle; register long zero = 0; register long i = 0; long count = 0; if (!fakedata) { return 0L; } fakedata_middle = (fakedata + 512); memset(fakedata, 0xFF, 1024); /* below the constraint "b" seems to mean "Address base register" in gcc-3.3 / RS/6000 speaks. seems to avoid using r0, so.... */ __asm__ volatile("dcbzl %0, %1" : : "b" (fakedata_middle), "r" (zero)); for (i = 0; i < 1024 ; i ++) { if (fakedata[i] == (char)0) count++; } av_free(fakedata); return count; } #else long check_dcbzl_effect(void) { return 0; } #endif static void prefetch_ppc(void *mem, int stride, int h) { register const uint8_t *p = mem; do { __asm__ volatile ("dcbt 0,%0" : : "r" (p)); p+= stride; } while(--h); } void dsputil_init_ppc(DSPContext* c, AVCodecContext *avctx) { // Common optimizations whether AltiVec is available or not c->prefetch = prefetch_ppc; switch (check_dcbzl_effect()) { case 32: c->clear_blocks = clear_blocks_dcbz32_ppc; break; case 128: c->clear_blocks = clear_blocks_dcbz128_ppc; break; default: break; } #if HAVE_ALTIVEC if(CONFIG_H264_DECODER) dsputil_h264_init_ppc(c, avctx); if (has_altivec()) { mm_flags |= FF_MM_ALTIVEC; dsputil_init_altivec(c, avctx); if(CONFIG_SNOW_DECODER) snow_init_altivec(c, avctx); if(CONFIG_VC1_DECODER || CONFIG_WMV3_DECODER) vc1dsp_init_altivec(c, avctx); float_init_altivec(c, avctx); int_init_altivec(c, avctx); c->gmc1 = gmc1_altivec; #if CONFIG_ENCODERS if (avctx->dct_algo == FF_DCT_AUTO || avctx->dct_algo == FF_DCT_ALTIVEC) { c->fdct = fdct_altivec; } #endif //CONFIG_ENCODERS if (avctx->lowres==0) { if ((avctx->idct_algo == FF_IDCT_AUTO) || (avctx->idct_algo == FF_IDCT_ALTIVEC)) { c->idct_put = idct_put_altivec; c->idct_add = idct_add_altivec; c->idct_permutation_type = FF_TRANSPOSE_IDCT_PERM; } } #if CONFIG_POWERPC_PERF { int i, j; for (i = 0 ; i < powerpc_perf_total ; i++) { for (j = 0; j < POWERPC_NUM_PMC_ENABLED ; j++) { perfdata[j][i][powerpc_data_min] = 0xFFFFFFFFFFFFFFFFULL; perfdata[j][i][powerpc_data_max] = 0x0000000000000000ULL; perfdata[j][i][powerpc_data_sum] = 0x0000000000000000ULL; perfdata[j][i][powerpc_data_num] = 0x0000000000000000ULL; } } } #endif /* CONFIG_POWERPC_PERF */ } #endif /* HAVE_ALTIVEC */ }