view acelp_math.c @ 6920:d02af7474bff libavcodec

Prevent 128*1<<trellis from becoming 0 and creating 0 sized arrays. fixes CID84 RUN2 CID85 RUN2 CID86 RUN2 CID87 RUN2 CID88 RUN2 CID89 RUN2 CID90 RUN2 CID91 RUN2 CID92 RUN2 CID93 RUN2 CID94 RUN2 CID95 RUN2 CID96 RUN2 CID97 RUN2 CID98 RUN2 CID99 RUN2 CID100 RUN2 CID101 RUN2 CID102 RUN2 CID103 RUN2 CID104 RUN2 CID105 RUN2 CID106 RUN2
author michael
date Wed, 28 May 2008 11:59:41 +0000
parents 1064be7fea22
children
line wrap: on
line source

/*
 * Various fixed-point math operations
 *
 * Copyright (c) 2008 Vladimir Voroshilov
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

#include <inttypes.h>
#include <limits.h>
#include <assert.h>

#include "avcodec.h"
#include "acelp_math.h"

#ifdef G729_BITEXACT
/**
 * Cosine table: base_cos[i] = (1<<15) * cos(i*PI/64)
 */
static const int16_t base_cos[64] =
{
  32767,  32729,  32610,  32413,  32138,  31786,  31357,  30853,
  30274,  29622,  28899,  28106,  27246,  26320,  25330,  24279,
  23170,  22006,  20788,  19520,  18205,  16846,  15447,  14010,
  12540,  11039,   9512,   7962,   6393,   4808,   3212,   1608,
      0,  -1608,  -3212,  -4808,  -6393,  -7962,  -9512, -11039,
 -12540, -14010, -15447, -16846, -18205, -19520, -20788, -22006,
 -23170, -24279, -25330, -26320, -27246, -28106, -28899, -29622,
 -30274, -30853, -31357, -31786, -32138, -32413, -32610, -32729
};

/**
 * Slope used to compute cos(x)
 *
 * cos(ind*64+offset) = base_cos[ind]+offset*slope_cos[ind]
 * values multiplied by 1<<19
 */
static const int16_t slope_cos[64] =
{
   -632,  -1893,  -3150,  -4399,  -5638,  -6863,  -8072,  -9261,
 -10428, -11570, -12684, -13767, -14817, -15832, -16808, -17744,
 -18637, -19486, -20287, -21039, -21741, -22390, -22986, -23526,
 -24009, -24435, -24801, -25108, -25354, -25540, -25664, -25726,
 -25726, -25664, -25540, -25354, -25108, -24801, -24435, -24009,
 -23526, -22986, -22390, -21741, -21039, -20287, -19486, -18637,
 -17744, -16808, -15832, -14817, -13767, -12684, -11570, -10428,
  -9261,  -8072,  -6863,  -5638,  -4399,  -3150,  -1893,   -632
};

/**
 * Table used to compute exp2(x)
 *
 * tab_exp2[i] = (1<<14) * exp2(i/32) = 2^(i/32) i=0..32
 */
static const uint16_t tab_exp2[33] =
{
  16384, 16743, 17109, 17484, 17867, 18258, 18658, 19066, 19484, 19911,
  20347, 20792, 21247, 21713, 22188, 22674, 23170, 23678, 24196, 24726,
  25268, 25821, 26386, 26964, 27554, 28158, 28774, 29405, 30048, 30706,
  31379, 32066, 32767
};

int16_t ff_cos(uint16_t arg)
{
    uint8_t offset= arg;
    uint8_t ind = arg >> 8;

    assert(arg < 0x4000);

    return FFMAX(base_cos[ind] + ((slope_cos[ind] * offset) >> 12), -0x8000);
}

int ff_exp2(uint16_t power)
{
    uint16_t frac_x0;
    uint16_t frac_dx;
    int result;

    assert(power <= 0x7fff);

    frac_x0 = power >> 10;
    frac_dx = (power & 0x03ff) << 5;

    result = tab_exp2[frac_x0] << 15;
    result += frac_dx * (tab_exp2[frac_x0+1] - tab_exp2[frac_x0]);

    return result >> 10;
}

#else // G729_BITEXACT

/**
 * Cosine table: base_cos[i] = (1<<15) * cos(i*PI/64)
 */
static const int16_t tab_cos[65] =
{
  32767,  32738,  32617,  32421,  32145,  31793,  31364,  30860,
  30280,  29629,  28905,  28113,  27252,  26326,  25336,  24285,
  23176,  22011,  20793,  19525,  18210,  16851,  15451,  14014,
  12543,  11043,   9515,   7965,   6395,   4810,   3214,   1609,
      1,  -1607,  -3211,  -4808,  -6393,  -7962,  -9513, -11040,
 -12541, -14012, -15449, -16848, -18207, -19523, -20791, -22009,
 -23174, -24283, -25334, -26324, -27250, -28111, -28904, -29627,
 -30279, -30858, -31363, -31792, -32144, -32419, -32616, -32736, -32768,
};

static const uint16_t exp2a[]=
{
     0,  1435,  2901,  4400,  5931,  7496,  9096, 10730,
 12400, 14106, 15850, 17632, 19454, 21315, 23216, 25160,
 27146, 29175, 31249, 33368, 35534, 37747, 40009, 42320,
 44682, 47095, 49562, 52082, 54657, 57289, 59979, 62727,
};

static const uint16_t exp2b[]=
{
     3,   712,  1424,  2134,  2845,  3557,  4270,  4982,
  5696,  6409,  7124,  7839,  8554,  9270,  9986, 10704,
 11421, 12138, 12857, 13576, 14295, 15014, 15734, 16455,
 17176, 17898, 18620, 19343, 20066, 20790, 21514, 22238,
};

int16_t ff_cos(uint16_t arg)
{
    uint8_t offset= arg;
    uint8_t ind = arg >> 8;

    assert(arg <= 0x3fff);

    return tab_cos[ind] + (offset * (tab_cos[ind+1] - tab_cos[ind]) >> 8);
}

int ff_exp2(uint16_t power)
{
    unsigned int result= exp2a[power>>10] + 0x10000;

    assert(arg <= 0x7fff);

    result= (result<<3) + ((result*exp2b[(power>>5)&31])>>17);
    return result + ((result*(power&31)*89)>>22);
}

#endif // else G729_BITEXACT

/**
 * Table used to compute log2(x)
 *
 * tab_log2[i] = (1<<15) * log2(1 + i/32), i=0..32
 */
static const uint16_t tab_log2[33] =
{
#ifdef G729_BITEXACT
      0,   1455,   2866,   4236,   5568,   6863,   8124,   9352,
  10549,  11716,  12855,  13967,  15054,  16117,  17156,  18172,
  19167,  20142,  21097,  22033,  22951,  23852,  24735,  25603,
  26455,  27291,  28113,  28922,  29716,  30497,  31266,  32023,  32767,
#else
      4,   1459,   2870,   4240,   5572,   6867,   8127,   9355,
  10552,  11719,  12858,  13971,  15057,  16120,  17158,  18175,
  19170,  20145,  21100,  22036,  22954,  23854,  24738,  25605,
  26457,  27294,  28116,  28924,  29719,  30500,  31269,  32025,  32769,
#endif
};

int ff_log2(uint32_t value)
{
    uint8_t  power_int;
    uint8_t  frac_x0;
    uint16_t frac_dx;

    // Stripping zeros from beginning
    power_int = av_log2(value);
    value <<= (31 - power_int);

    // b31 is always non-zero now
    frac_x0 = (value & 0x7c000000) >> 26; // b26-b31 and [32..63] -> [0..31]
    frac_dx = (value & 0x03fff800) >> 11;

    value = tab_log2[frac_x0];
    value += (frac_dx * (tab_log2[frac_x0+1] - tab_log2[frac_x0])) >> 15;

    return (power_int << 15) + value;
}