view fft.c @ 4166:eced83504436 libavcodec

mp3 header (de)compression bitstream filter this will make mp3 frames 4 bytes smaller, it will not give you binary identical mp3 files, but it will give you mp3 files which decode to binary identical output this will only work in containers providing at least packet size, sample_rate and number of channels bugreports about mp3 files for which this fails are welcome and this is experimental (dont expect compatibility and dont even expect to be able to decompress what you compressed, hell dont even expect this to work without editing the source a little)

/*
 * FFT/IFFT transforms
 * Copyright (c) 2002 Fabrice Bellard.
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

/**
 * @file fft.c
 * FFT/IFFT transforms.
 */

#include "dsputil.h"

/**
 * The size of the FFT is 2^nbits. If inverse is TRUE, inverse FFT is
 * done
 */
int ff_fft_init(FFTContext *s, int nbits, int inverse)
{
    int i, j, m, n;
    float alpha, c1, s1, s2;

    s->nbits = nbits;
    n = 1 << nbits;

    s->exptab = av_malloc((n / 2) * sizeof(FFTComplex));
    if (!s->exptab)
        goto fail;
    s->revtab = av_malloc(n * sizeof(uint16_t));
    if (!s->revtab)
        goto fail;
    s->inverse = inverse;

    s2 = inverse ? 1.0 : -1.0;

    for(i=0;i<(n/2);i++) {
        alpha = 2 * M_PI * (float)i / (float)n;
        c1 = cos(alpha);
        s1 = sin(alpha) * s2;
        s->exptab[i].re = c1;
        s->exptab[i].im = s1;
    }
    s->fft_calc = ff_fft_calc_c;
    s->imdct_calc = ff_imdct_calc;
    s->exptab1 = NULL;

    /* compute constant table for HAVE_SSE version */
#if defined(HAVE_MMX) \
    || (defined(HAVE_ALTIVEC) && !defined(ALTIVEC_USE_REFERENCE_C_CODE))
    {
        int has_vectors = mm_support();

        if (has_vectors) {
#if defined(HAVE_MMX)
            if (has_vectors & MM_3DNOWEXT) {
                /* 3DNowEx for K7/K8 */
                s->imdct_calc = ff_imdct_calc_3dn2;
                s->fft_calc = ff_fft_calc_3dn2;
            } else if (has_vectors & MM_3DNOW) {
                /* 3DNow! for K6-2/3 */
                s->fft_calc = ff_fft_calc_3dn;
            } else if (has_vectors & MM_SSE) {
                /* SSE for P3/P4 */
                s->imdct_calc = ff_imdct_calc_sse;
                s->fft_calc = ff_fft_calc_sse;
            }
#else /* HAVE_MMX */
            if (has_vectors & MM_ALTIVEC)
                s->fft_calc = ff_fft_calc_altivec;
#endif
        }
        if (s->fft_calc != ff_fft_calc_c) {
            int np, nblocks, np2, l;
            FFTComplex *q;

            np = 1 << nbits;
            nblocks = np >> 3;
            np2 = np >> 1;
            s->exptab1 = av_malloc(np * 2 * sizeof(FFTComplex));
            if (!s->exptab1)
                goto fail;
            q = s->exptab1;
            do {
                for(l = 0; l < np2; l += 2 * nblocks) {
                    *q++ = s->exptab[l];
                    *q++ = s->exptab[l + nblocks];

                    q->re = -s->exptab[l].im;
                    q->im = s->exptab[l].re;
                    q++;
                    q->re = -s->exptab[l + nblocks].im;
                    q->im = s->exptab[l + nblocks].re;
                    q++;
                }
                nblocks = nblocks >> 1;
            } while (nblocks != 0);
            av_freep(&s->exptab);
        }
    }
#endif

    /* compute bit reverse table */

    for(i=0;i<n;i++) {
        m=0;
        for(j=0;j<nbits;j++) {
            m |= ((i >> j) & 1) << (nbits-j-1);
        }
        s->revtab[i]=m;
    }
    return 0;
 fail:
    av_freep(&s->revtab);
    av_freep(&s->exptab);
    av_freep(&s->exptab1);
    return -1;
}

/* butter fly op */
#define BF(pre, pim, qre, qim, pre1, pim1, qre1, qim1) \
{\
  FFTSample ax, ay, bx, by;\
  bx=pre1;\
  by=pim1;\
  ax=qre1;\
  ay=qim1;\
  pre = (bx + ax);\
  pim = (by + ay);\
  qre = (bx - ax);\
  qim = (by - ay);\
}

#define MUL16(a,b) ((a) * (b))

#define CMUL(pre, pim, are, aim, bre, bim) \
{\
   pre = (MUL16(are, bre) - MUL16(aim, bim));\
   pim = (MUL16(are, bim) + MUL16(bre, aim));\
}

/**
 * Do a complex FFT with the parameters defined in ff_fft_init(). The
 * input data must be permuted before with s->revtab table. No
 * 1.0/sqrt(n) normalization is done.
 */
void ff_fft_calc_c(FFTContext *s, FFTComplex *z)
{
    int ln = s->nbits;
    int j, np, np2;
    int nblocks, nloops;
    register FFTComplex *p, *q;
    FFTComplex *exptab = s->exptab;
    int l;
    FFTSample tmp_re, tmp_im;

    np = 1 << ln;

    /* pass 0 */

    p=&z[0];
    j=(np >> 1);
    do {
        BF(p[0].re, p[0].im, p[1].re, p[1].im,
           p[0].re, p[0].im, p[1].re, p[1].im);
        p+=2;
    } while (--j != 0);

    /* pass 1 */


    p=&z[0];
    j=np >> 2;
    if (s->inverse) {
        do {
            BF(p[0].re, p[0].im, p[2].re, p[2].im,
               p[0].re, p[0].im, p[2].re, p[2].im);
            BF(p[1].re, p[1].im, p[3].re, p[3].im,
               p[1].re, p[1].im, -p[3].im, p[3].re);
            p+=4;
        } while (--j != 0);
    } else {
        do {
            BF(p[0].re, p[0].im, p[2].re, p[2].im,
               p[0].re, p[0].im, p[2].re, p[2].im);
            BF(p[1].re, p[1].im, p[3].re, p[3].im,
               p[1].re, p[1].im, p[3].im, -p[3].re);
            p+=4;
        } while (--j != 0);
    }
    /* pass 2 .. ln-1 */

    nblocks = np >> 3;
    nloops = 1 << 2;
    np2 = np >> 1;
    do {
        p = z;
        q = z + nloops;
        for (j = 0; j < nblocks; ++j) {
            BF(p->re, p->im, q->re, q->im,
               p->re, p->im, q->re, q->im);

            p++;
            q++;
            for(l = nblocks; l < np2; l += nblocks) {
                CMUL(tmp_re, tmp_im, exptab[l].re, exptab[l].im, q->re, q->im);
                BF(p->re, p->im, q->re, q->im,
                   p->re, p->im, tmp_re, tmp_im);
                p++;
                q++;
            }

            p += nloops;
            q += nloops;
        }
        nblocks = nblocks >> 1;
        nloops = nloops << 1;
    } while (nblocks != 0);
}

/**
 * Do the permutation needed BEFORE calling ff_fft_calc()
 */
void ff_fft_permute(FFTContext *s, FFTComplex *z)
{
    int j, k, np;
    FFTComplex tmp;
    const uint16_t *revtab = s->revtab;

    /* reverse */
    np = 1 << s->nbits;
    for(j=0;j<np;j++) {
        k = revtab[j];
        if (k < j) {
            tmp = z[k];
            z[k] = z[j];
            z[j] = tmp;
        }
    }
}

void ff_fft_end(FFTContext *s)
{
    av_freep(&s->revtab);
    av_freep(&s->exptab);
    av_freep(&s->exptab1);
}