view bfin/mpegvideo_bfin.c @ 12197:fbf4d5b1b664 libavcodec

Remove FF_MM_SSE2/3 flags for CPUs where this is generally not faster than regular MMX code. Examples of this are the Core1 CPU. Instead, set a new flag, FF_MM_SSE2/3SLOW, which can be checked for particular SSE2/3 functions that have been checked specifically on such CPUs and are actually faster than their MMX counterparts. In addition, use this flag to enable particular VP8 and LPC SSE2 functions that are faster than their MMX counterparts. Based on a patch by Loren Merritt <lorenm AT u washington edu>.

/*
 * BlackFin MPEGVIDEO OPTIMIZATIONS
 *
 * Copyright (C) 2007 Marc Hoffman <[e-mail]>
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

#include "libavcodec/avcodec.h"
#include "libavcodec/dsputil.h"
#include "libavcodec/mpegvideo.h"
#include "dsputil_bfin.h"

static int dct_quantize_bfin (MpegEncContext *s,
                              DCTELEM *block, int n,
                              int qscale, int *overflow)
{
    int last_non_zero, q, start_i;
    const short *qmat;
    short *bias;
    const uint8_t *scantable= s->intra_scantable.scantable;
    short dc;
    int   max=0;

    PROF("fdct",0);
    s->dsp.fdct(block);
    EPROF();

    PROF("denoise",1);
    if(s->dct_error_sum)
        s->denoise_dct(s, block);
    EPROF();

    PROF("quant-init",2);
    if (s->mb_intra) {
        if (!s->h263_aic) {
            if (n < 4)
                q = s->y_dc_scale;
            else
                q = s->c_dc_scale;
            q = q << 3;
        } else
            /* For AIC we skip quant/dequant of INTRADC */
            q = 1 << 3;

        /* note: block[0] is assumed to be positive */
        dc = block[0] = (block[0] + (q >> 1)) / q;
        start_i = 1;
        last_non_zero = 0;
        bias = s->q_intra_matrix16[qscale][1];
        qmat = s->q_intra_matrix16[qscale][0];

    } else {
        start_i = 0;
        last_non_zero = -1;
        bias = s->q_inter_matrix16[qscale][1];
        qmat = s->q_inter_matrix16[qscale][0];

    }
    EPROF();

    PROF("quantize",4);

    /*  for(i=start_i; i<64; i++) {                           */
    /*      sign     = (block[i]>>15)|1;                      */
    /*      level    = ((abs(block[i])+bias[0])*qmat[i])>>16; */
    /*      if (level < 0) level = 0;                         */
    /*      max     |= level;                                 */
    /*      level    = level * sign;                          */
    /*      block[i] = level;                                 */
    /*  } */

    __asm__ volatile
        ("i2=%1;\n\t"
         "r1=[%1++];                                                         \n\t"
         "r0=r1>>>15 (v);                                                    \n\t"
         "lsetup (0f,1f) lc0=%3;                                             \n\t"
         "0:   r0=r0|%4;                                                     \n\t"
         "     r1=abs r1 (v)                                    || r2=[%2++];\n\t"
         "     r1=r1+|+%5;                                                   \n\t"
         "     r1=max(r1,%6) (v);                                            \n\t"
         "     r1.h=(a1 =r1.h*r2.h), r1.l=(a0 =r1.l*r2.l) (tfu);             \n\t"
         "     %0=%0|r1;                                                     \n\t"
         "     r0.h=(a1 =r1.h*r0.h), r0.l=(a0 =r1.l*r0.l) (is)  || r1=[%1++];\n\t"
         "1:   r0=r1>>>15 (v)                                   || [i2++]=r0;\n\t"
         "r1=%0>>16;                                                         \n\t"
         "%0=%0|r1;                                                          \n\t"
         "%0.h=0;                                                            \n\t"
         : "=&d" (max)
         : "b" (block), "b" (qmat), "a" (32), "d" (0x00010001), "d" (bias[0]*0x10001), "d" (0)
         : "R0","R1","R2", "I2");
    if (start_i == 1) block[0] = dc;

    EPROF();


    PROF("zzscan",5);

    __asm__ volatile
        ("r0=b[%1--] (x);         \n\t"
         "lsetup (0f,1f) lc0=%3;  \n\t"     /*    for(i=63; i>=start_i; i--) { */
         "0: p0=r0;               \n\t"     /*        j = scantable[i];        */
         "   p0=%2+(p0<<1);       \n\t"     /*        if (block[j]) {          */
         "   r0=w[p0];            \n\t"     /*           last_non_zero = i;    */
         "   cc=r0==0;            \n\t"     /*           break;                */
         "   if !cc jump 2f;      \n\t"     /*        }                        */
         "1: r0=b[%1--] (x);      \n\t"     /*    }                            */
         "   %0=%4;               \n\t"
         "   jump 3f;             \n\t"
         "2: %0=lc0;              \n\t"
         "3:\n\t"

         : "=d" (last_non_zero)
         : "a" (scantable+63), "a" (block), "a" (63), "d" (last_non_zero)
         : "P0","R0");

    EPROF();

    *overflow= s->max_qcoeff < max; //overflow might have happened

    bfprof();

    /* we need this permutation so that we correct the IDCT, we only permute the !=0 elements */
    if (s->dsp.idct_permutation_type != FF_NO_IDCT_PERM)
        ff_block_permute(block, s->dsp.idct_permutation, scantable, last_non_zero);

    return last_non_zero;
}

void MPV_common_init_bfin (MpegEncContext *s)
{
/*     s->dct_quantize= dct_quantize_bfin; */
}