view x86/vp3dsp_mmx.c @ 12197:fbf4d5b1b664 libavcodec

Remove FF_MM_SSE2/3 flags for CPUs where this is generally not faster than regular MMX code. Examples of this are the Core1 CPU. Instead, set a new flag, FF_MM_SSE2/3SLOW, which can be checked for particular SSE2/3 functions that have been checked specifically on such CPUs and are actually faster than their MMX counterparts. In addition, use this flag to enable particular VP8 and LPC SSE2 functions that are faster than their MMX counterparts. Based on a patch by Loren Merritt <lorenm AT u washington edu>.

/*
 * Copyright (C) 2004 the ffmpeg project
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

/**
 * @file
 * MMX-optimized functions cribbed from the original VP3 source code.
 */

#include "libavutil/x86_cpu.h"
#include "libavcodec/dsputil.h"
#include "dsputil_mmx.h"
#include "vp3dsp_mmx.h"

extern const uint16_t ff_vp3_idct_data[];

// this is off by one or two for some cases when filter_limit is greater than 63
// in:  p0 in mm6, p1 in mm4, p2 in mm2, p3 in mm1
// out: p1 in mm4, p2 in mm3
#define VP3_LOOP_FILTER(flim) \
    "movq       %%mm6, %%mm7 \n\t" \
    "pand    "MANGLE(ff_pb_7 )", %%mm6 \n\t" /* p0&7 */ \
    "psrlw         $3, %%mm7 \n\t" \
    "pand    "MANGLE(ff_pb_1F)", %%mm7 \n\t" /* p0>>3 */ \
    "movq       %%mm2, %%mm3 \n\t" /* mm3 = p2 */ \
    "pxor       %%mm4, %%mm2 \n\t" \
    "pand    "MANGLE(ff_pb_1 )", %%mm2 \n\t" /* (p2^p1)&1 */ \
    "movq       %%mm2, %%mm5 \n\t" \
    "paddb      %%mm2, %%mm2 \n\t" \
    "paddb      %%mm5, %%mm2 \n\t" /* 3*(p2^p1)&1 */ \
    "paddb      %%mm6, %%mm2 \n\t" /* extra bits lost in shifts */ \
    "pcmpeqb    %%mm0, %%mm0 \n\t" \
    "pxor       %%mm0, %%mm1 \n\t" /* 255 - p3 */ \
    "pavgb      %%mm2, %%mm1 \n\t" /* (256 - p3 + extrabits) >> 1 */ \
    "pxor       %%mm4, %%mm0 \n\t" /* 255 - p1 */ \
    "pavgb      %%mm3, %%mm0 \n\t" /* (256 + p2-p1) >> 1 */ \
    "paddb   "MANGLE(ff_pb_3 )", %%mm1 \n\t" \
    "pavgb      %%mm0, %%mm1 \n\t" /* 128+2+(   p2-p1  - p3) >> 2 */ \
    "pavgb      %%mm0, %%mm1 \n\t" /* 128+1+(3*(p2-p1) - p3) >> 3 */ \
    "paddusb    %%mm1, %%mm7 \n\t" /* d+128+1 */ \
    "movq    "MANGLE(ff_pb_81)", %%mm6 \n\t" \
    "psubusb    %%mm7, %%mm6 \n\t" \
    "psubusb "MANGLE(ff_pb_81)", %%mm7 \n\t" \
\
    "movq     "#flim", %%mm5 \n\t" \
    "pminub     %%mm5, %%mm6 \n\t" \
    "pminub     %%mm5, %%mm7 \n\t" \
    "movq       %%mm6, %%mm0 \n\t" \
    "movq       %%mm7, %%mm1 \n\t" \
    "paddb      %%mm6, %%mm6 \n\t" \
    "paddb      %%mm7, %%mm7 \n\t" \
    "pminub     %%mm5, %%mm6 \n\t" \
    "pminub     %%mm5, %%mm7 \n\t" \
    "psubb      %%mm0, %%mm6 \n\t" \
    "psubb      %%mm1, %%mm7 \n\t" \
    "paddusb    %%mm7, %%mm4 \n\t" \
    "psubusb    %%mm6, %%mm4 \n\t" \
    "psubusb    %%mm7, %%mm3 \n\t" \
    "paddusb    %%mm6, %%mm3 \n\t"

#define STORE_4_WORDS(dst0, dst1, dst2, dst3, mm) \
    "movd "#mm", %0        \n\t" \
    "movw   %w0, -1"#dst0" \n\t" \
    "psrlq  $32, "#mm"     \n\t" \
    "shr    $16, %0        \n\t" \
    "movw   %w0, -1"#dst1" \n\t" \
    "movd "#mm", %0        \n\t" \
    "movw   %w0, -1"#dst2" \n\t" \
    "shr    $16, %0        \n\t" \
    "movw   %w0, -1"#dst3" \n\t"

void ff_vp3_v_loop_filter_mmx2(uint8_t *src, int stride, int *bounding_values)
{
    __asm__ volatile(
        "movq          %0, %%mm6 \n\t"
        "movq          %1, %%mm4 \n\t"
        "movq          %2, %%mm2 \n\t"
        "movq          %3, %%mm1 \n\t"

        VP3_LOOP_FILTER(%4)

        "movq       %%mm4, %1    \n\t"
        "movq       %%mm3, %2    \n\t"

        : "+m" (*(uint64_t*)(src - 2*stride)),
          "+m" (*(uint64_t*)(src - 1*stride)),
          "+m" (*(uint64_t*)(src + 0*stride)),
          "+m" (*(uint64_t*)(src + 1*stride))
        : "m"(*(uint64_t*)(bounding_values+129))
    );
}

void ff_vp3_h_loop_filter_mmx2(uint8_t *src, int stride, int *bounding_values)
{
    x86_reg tmp;

    __asm__ volatile(
        "movd -2(%1),      %%mm6 \n\t"
        "movd -2(%1,%3),   %%mm0 \n\t"
        "movd -2(%1,%3,2), %%mm1 \n\t"
        "movd -2(%1,%4),   %%mm4 \n\t"

        TRANSPOSE8x4(%%mm6, %%mm0, %%mm1, %%mm4, -2(%2), -2(%2,%3), -2(%2,%3,2), -2(%2,%4), %%mm2)
        VP3_LOOP_FILTER(%5)
        SBUTTERFLY(%%mm4, %%mm3, %%mm5, bw, q)

        STORE_4_WORDS((%1), (%1,%3), (%1,%3,2), (%1,%4), %%mm4)
        STORE_4_WORDS((%2), (%2,%3), (%2,%3,2), (%2,%4), %%mm5)

        : "=&r"(tmp)
        : "r"(src), "r"(src+4*stride), "r"((x86_reg)stride), "r"((x86_reg)3*stride),
          "m"(*(uint64_t*)(bounding_values+129))
        : "memory"
    );
}

/* from original comments: The Macro does IDct on 4 1-D Dcts */
#define BeginIDCT() \
    "movq   "I(3)", %%mm2 \n\t" \
    "movq   "C(3)", %%mm6 \n\t" \
    "movq    %%mm2, %%mm4 \n\t" \
    "movq   "J(5)", %%mm7 \n\t" \
    "pmulhw  %%mm6, %%mm4 \n\t"    /* r4 = c3*i3 - i3 */ \
    "movq   "C(5)", %%mm1 \n\t" \
    "pmulhw  %%mm7, %%mm6 \n\t"    /* r6 = c3*i5 - i5 */ \
    "movq    %%mm1, %%mm5 \n\t" \
    "pmulhw  %%mm2, %%mm1 \n\t"    /* r1 = c5*i3 - i3 */ \
    "movq   "I(1)", %%mm3 \n\t" \
    "pmulhw  %%mm7, %%mm5 \n\t"    /* r5 = c5*i5 - i5 */ \
    "movq   "C(1)", %%mm0 \n\t" \
    "paddw   %%mm2, %%mm4 \n\t"    /* r4 = c3*i3 */ \
    "paddw   %%mm7, %%mm6 \n\t"    /* r6 = c3*i5 */ \
    "paddw   %%mm1, %%mm2 \n\t"    /* r2 = c5*i3 */ \
    "movq   "J(7)", %%mm1 \n\t" \
    "paddw   %%mm5, %%mm7 \n\t"    /* r7 = c5*i5 */ \
    "movq    %%mm0, %%mm5 \n\t"    /* r5 = c1 */ \
    "pmulhw  %%mm3, %%mm0 \n\t"    /* r0 = c1*i1 - i1 */ \
    "paddsw  %%mm7, %%mm4 \n\t"    /* r4 = C = c3*i3 + c5*i5 */ \
    "pmulhw  %%mm1, %%mm5 \n\t"    /* r5 = c1*i7 - i7 */ \
    "movq   "C(7)", %%mm7 \n\t" \
    "psubsw  %%mm2, %%mm6 \n\t"    /* r6 = D = c3*i5 - c5*i3 */ \
    "paddw   %%mm3, %%mm0 \n\t"    /* r0 = c1*i1 */ \
    "pmulhw  %%mm7, %%mm3 \n\t"    /* r3 = c7*i1 */ \
    "movq   "I(2)", %%mm2 \n\t" \
    "pmulhw  %%mm1, %%mm7 \n\t"    /* r7 = c7*i7 */ \
    "paddw   %%mm1, %%mm5 \n\t"    /* r5 = c1*i7 */ \
    "movq    %%mm2, %%mm1 \n\t"    /* r1 = i2 */ \
    "pmulhw "C(2)", %%mm2 \n\t"    /* r2 = c2*i2 - i2 */ \
    "psubsw  %%mm5, %%mm3 \n\t"    /* r3 = B = c7*i1 - c1*i7 */ \
    "movq   "J(6)", %%mm5 \n\t" \
    "paddsw  %%mm7, %%mm0 \n\t"    /* r0 = A = c1*i1 + c7*i7 */ \
    "movq    %%mm5, %%mm7 \n\t"    /* r7 = i6 */ \
    "psubsw  %%mm4, %%mm0 \n\t"    /* r0 = A - C */ \
    "pmulhw "C(2)", %%mm5 \n\t"    /* r5 = c2*i6 - i6 */ \
    "paddw   %%mm1, %%mm2 \n\t"    /* r2 = c2*i2 */ \
    "pmulhw "C(6)", %%mm1 \n\t"    /* r1 = c6*i2 */ \
    "paddsw  %%mm4, %%mm4 \n\t"    /* r4 = C + C */ \
    "paddsw  %%mm0, %%mm4 \n\t"    /* r4 = C. = A + C */ \
    "psubsw  %%mm6, %%mm3 \n\t"    /* r3 = B - D */ \
    "paddw   %%mm7, %%mm5 \n\t"    /* r5 = c2*i6 */ \
    "paddsw  %%mm6, %%mm6 \n\t"    /* r6 = D + D */ \
    "pmulhw "C(6)", %%mm7 \n\t"    /* r7 = c6*i6 */ \
    "paddsw  %%mm3, %%mm6 \n\t"    /* r6 = D. = B + D */ \
    "movq    %%mm4, "I(1)"\n\t"    /* save C. at I(1) */ \
    "psubsw  %%mm5, %%mm1 \n\t"    /* r1 = H = c6*i2 - c2*i6 */ \
    "movq   "C(4)", %%mm4 \n\t" \
    "movq    %%mm3, %%mm5 \n\t"    /* r5 = B - D */ \
    "pmulhw  %%mm4, %%mm3 \n\t"    /* r3 = (c4 - 1) * (B - D) */ \
    "paddsw  %%mm2, %%mm7 \n\t"    /* r3 = (c4 - 1) * (B - D) */ \
    "movq    %%mm6, "I(2)"\n\t"    /* save D. at I(2) */ \
    "movq    %%mm0, %%mm2 \n\t"    /* r2 = A - C */ \
    "movq   "I(0)", %%mm6 \n\t" \
    "pmulhw  %%mm4, %%mm0 \n\t"    /* r0 = (c4 - 1) * (A - C) */ \
    "paddw   %%mm3, %%mm5 \n\t"    /* r5 = B. = c4 * (B - D) */ \
    "movq   "J(4)", %%mm3 \n\t" \
    "psubsw  %%mm1, %%mm5 \n\t"    /* r5 = B.. = B. - H */ \
    "paddw   %%mm0, %%mm2 \n\t"    /* r0 = A. = c4 * (A - C) */ \
    "psubsw  %%mm3, %%mm6 \n\t"    /* r6 = i0 - i4 */ \
    "movq    %%mm6, %%mm0 \n\t" \
    "pmulhw  %%mm4, %%mm6 \n\t"    /* r6 = (c4 - 1) * (i0 - i4) */ \
    "paddsw  %%mm3, %%mm3 \n\t"    /* r3 = i4 + i4 */ \
    "paddsw  %%mm1, %%mm1 \n\t"    /* r1 = H + H */ \
    "paddsw  %%mm0, %%mm3 \n\t"    /* r3 = i0 + i4 */ \
    "paddsw  %%mm5, %%mm1 \n\t"    /* r1 = H. = B + H */ \
    "pmulhw  %%mm3, %%mm4 \n\t"    /* r4 = (c4 - 1) * (i0 + i4) */ \
    "paddsw  %%mm0, %%mm6 \n\t"    /* r6 = F = c4 * (i0 - i4) */ \
    "psubsw  %%mm2, %%mm6 \n\t"    /* r6 = F. = F - A. */ \
    "paddsw  %%mm2, %%mm2 \n\t"    /* r2 = A. + A. */ \
    "movq   "I(1)", %%mm0 \n\t"    /* r0 = C. */ \
    "paddsw  %%mm6, %%mm2 \n\t"    /* r2 = A.. = F + A. */ \
    "paddw   %%mm3, %%mm4 \n\t"    /* r4 = E = c4 * (i0 + i4) */ \
    "psubsw  %%mm1, %%mm2 \n\t"    /* r2 = R2 = A.. - H. */

/* RowIDCT gets ready to transpose */
#define RowIDCT() \
    BeginIDCT() \
    "movq   "I(2)", %%mm3 \n\t"    /* r3 = D. */ \
    "psubsw  %%mm7, %%mm4 \n\t"    /* r4 = E. = E - G */ \
    "paddsw  %%mm1, %%mm1 \n\t"    /* r1 = H. + H. */ \
    "paddsw  %%mm7, %%mm7 \n\t"    /* r7 = G + G */ \
    "paddsw  %%mm2, %%mm1 \n\t"    /* r1 = R1 = A.. + H. */ \
    "paddsw  %%mm4, %%mm7 \n\t"    /* r1 = R1 = A.. + H. */ \
    "psubsw  %%mm3, %%mm4 \n\t"    /* r4 = R4 = E. - D. */ \
    "paddsw  %%mm3, %%mm3 \n\t" \
    "psubsw  %%mm5, %%mm6 \n\t"    /* r6 = R6 = F. - B.. */ \
    "paddsw  %%mm5, %%mm5 \n\t" \
    "paddsw  %%mm4, %%mm3 \n\t"    /* r3 = R3 = E. + D. */ \
    "paddsw  %%mm6, %%mm5 \n\t"    /* r5 = R5 = F. + B.. */ \
    "psubsw  %%mm0, %%mm7 \n\t"    /* r7 = R7 = G. - C. */ \
    "paddsw  %%mm0, %%mm0 \n\t" \
    "movq    %%mm1, "I(1)"\n\t"    /* save R1 */ \
    "paddsw  %%mm7, %%mm0 \n\t"    /* r0 = R0 = G. + C. */

/* Column IDCT normalizes and stores final results */
#define ColumnIDCT() \
    BeginIDCT() \
    "paddsw "OC_8", %%mm2 \n\t"    /* adjust R2 (and R1) for shift */ \
    "paddsw  %%mm1, %%mm1 \n\t"    /* r1 = H. + H. */ \
    "paddsw  %%mm2, %%mm1 \n\t"    /* r1 = R1 = A.. + H. */ \
    "psraw      $4, %%mm2 \n\t"    /* r2 = NR2 */ \
    "psubsw  %%mm7, %%mm4 \n\t"    /* r4 = E. = E - G */ \
    "psraw      $4, %%mm1 \n\t"    /* r1 = NR1 */ \
    "movq   "I(2)", %%mm3 \n\t"    /* r3 = D. */ \
    "paddsw  %%mm7, %%mm7 \n\t"    /* r7 = G + G */ \
    "movq    %%mm2, "I(2)"\n\t"    /* store NR2 at I2 */ \
    "paddsw  %%mm4, %%mm7 \n\t"    /* r7 = G. = E + G */ \
    "movq    %%mm1, "I(1)"\n\t"    /* store NR1 at I1 */ \
    "psubsw  %%mm3, %%mm4 \n\t"    /* r4 = R4 = E. - D. */ \
    "paddsw "OC_8", %%mm4 \n\t"    /* adjust R4 (and R3) for shift */ \
    "paddsw  %%mm3, %%mm3 \n\t"    /* r3 = D. + D. */ \
    "paddsw  %%mm4, %%mm3 \n\t"    /* r3 = R3 = E. + D. */ \
    "psraw      $4, %%mm4 \n\t"    /* r4 = NR4 */ \
    "psubsw  %%mm5, %%mm6 \n\t"    /* r6 = R6 = F. - B.. */ \
    "psraw      $4, %%mm3 \n\t"    /* r3 = NR3 */ \
    "paddsw "OC_8", %%mm6 \n\t"    /* adjust R6 (and R5) for shift */ \
    "paddsw  %%mm5, %%mm5 \n\t"    /* r5 = B.. + B.. */ \
    "paddsw  %%mm6, %%mm5 \n\t"    /* r5 = R5 = F. + B.. */ \
    "psraw      $4, %%mm6 \n\t"    /* r6 = NR6 */ \
    "movq    %%mm4, "J(4)"\n\t"    /* store NR4 at J4 */ \
    "psraw      $4, %%mm5 \n\t"    /* r5 = NR5 */ \
    "movq    %%mm3, "I(3)"\n\t"    /* store NR3 at I3 */ \
    "psubsw  %%mm0, %%mm7 \n\t"    /* r7 = R7 = G. - C. */ \
    "paddsw "OC_8", %%mm7 \n\t"    /* adjust R7 (and R0) for shift */ \
    "paddsw  %%mm0, %%mm0 \n\t"    /* r0 = C. + C. */ \
    "paddsw  %%mm7, %%mm0 \n\t"    /* r0 = R0 = G. + C. */ \
    "psraw      $4, %%mm7 \n\t"    /* r7 = NR7 */ \
    "movq    %%mm6, "J(6)"\n\t"    /* store NR6 at J6 */ \
    "psraw      $4, %%mm0 \n\t"    /* r0 = NR0 */ \
    "movq    %%mm5, "J(5)"\n\t"    /* store NR5 at J5 */ \
    "movq    %%mm7, "J(7)"\n\t"    /* store NR7 at J7 */ \
    "movq    %%mm0, "I(0)"\n\t"    /* store NR0 at I0 */

/* Following macro does two 4x4 transposes in place.

  At entry (we assume):

    r0 = a3 a2 a1 a0
    I(1) = b3 b2 b1 b0
    r2 = c3 c2 c1 c0
    r3 = d3 d2 d1 d0

    r4 = e3 e2 e1 e0
    r5 = f3 f2 f1 f0
    r6 = g3 g2 g1 g0
    r7 = h3 h2 h1 h0

  At exit, we have:

    I(0) = d0 c0 b0 a0
    I(1) = d1 c1 b1 a1
    I(2) = d2 c2 b2 a2
    I(3) = d3 c3 b3 a3

    J(4) = h0 g0 f0 e0
    J(5) = h1 g1 f1 e1
    J(6) = h2 g2 f2 e2
    J(7) = h3 g3 f3 e3

   I(0) I(1) I(2) I(3)  is the transpose of r0 I(1) r2 r3.
   J(4) J(5) J(6) J(7)  is the transpose of r4 r5 r6 r7.

   Since r1 is free at entry, we calculate the Js first. */
#define Transpose() \
    "movq       %%mm4, %%mm1 \n\t"    /* r1 = e3 e2 e1 e0 */ \
    "punpcklwd  %%mm5, %%mm4 \n\t"    /* r4 = f1 e1 f0 e0 */ \
    "movq       %%mm0, "I(0)"\n\t"    /* save a3 a2 a1 a0 */ \
    "punpckhwd  %%mm5, %%mm1 \n\t"    /* r1 = f3 e3 f2 e2 */ \
    "movq       %%mm6, %%mm0 \n\t"    /* r0 = g3 g2 g1 g0 */ \
    "punpcklwd  %%mm7, %%mm6 \n\t"    /* r6 = h1 g1 h0 g0 */ \
    "movq       %%mm4, %%mm5 \n\t"    /* r5 = f1 e1 f0 e0 */ \
    "punpckldq  %%mm6, %%mm4 \n\t"    /* r4 = h0 g0 f0 e0 = R4 */ \
    "punpckhdq  %%mm6, %%mm5 \n\t"    /* r5 = h1 g1 f1 e1 = R5 */ \
    "movq       %%mm1, %%mm6 \n\t"    /* r6 = f3 e3 f2 e2 */ \
    "movq       %%mm4, "J(4)"\n\t" \
    "punpckhwd  %%mm7, %%mm0 \n\t"    /* r0 = h3 g3 h2 g2 */ \
    "movq       %%mm5, "J(5)"\n\t" \
    "punpckhdq  %%mm0, %%mm6 \n\t"    /* r6 = h3 g3 f3 e3 = R7 */ \
    "movq      "I(0)", %%mm4 \n\t"    /* r4 = a3 a2 a1 a0 */ \
    "punpckldq  %%mm0, %%mm1 \n\t"    /* r1 = h2 g2 f2 e2 = R6 */ \
    "movq      "I(1)", %%mm5 \n\t"    /* r5 = b3 b2 b1 b0 */ \
    "movq       %%mm4, %%mm0 \n\t"    /* r0 = a3 a2 a1 a0 */ \
    "movq       %%mm6, "J(7)"\n\t" \
    "punpcklwd  %%mm5, %%mm0 \n\t"    /* r0 = b1 a1 b0 a0 */ \
    "movq       %%mm1, "J(6)"\n\t" \
    "punpckhwd  %%mm5, %%mm4 \n\t"    /* r4 = b3 a3 b2 a2 */ \
    "movq       %%mm2, %%mm5 \n\t"    /* r5 = c3 c2 c1 c0 */ \
    "punpcklwd  %%mm3, %%mm2 \n\t"    /* r2 = d1 c1 d0 c0 */ \
    "movq       %%mm0, %%mm1 \n\t"    /* r1 = b1 a1 b0 a0 */ \
    "punpckldq  %%mm2, %%mm0 \n\t"    /* r0 = d0 c0 b0 a0 = R0 */ \
    "punpckhdq  %%mm2, %%mm1 \n\t"    /* r1 = d1 c1 b1 a1 = R1 */ \
    "movq       %%mm4, %%mm2 \n\t"    /* r2 = b3 a3 b2 a2 */ \
    "movq       %%mm0, "I(0)"\n\t" \
    "punpckhwd  %%mm3, %%mm5 \n\t"    /* r5 = d3 c3 d2 c2 */ \
    "movq       %%mm1, "I(1)"\n\t" \
    "punpckhdq  %%mm5, %%mm4 \n\t"    /* r4 = d3 c3 b3 a3 = R3 */ \
    "punpckldq  %%mm5, %%mm2 \n\t"    /* r2 = d2 c2 b2 a2 = R2 */ \
    "movq       %%mm4, "I(3)"\n\t" \
    "movq       %%mm2, "I(2)"\n\t"

void ff_vp3_idct_mmx(int16_t *output_data)
{
    /* eax = quantized input
     * ebx = dequantizer matrix
     * ecx = IDCT constants
     *  M(I) = ecx + MaskOffset(0) + I * 8
     *  C(I) = ecx + CosineOffset(32) + (I-1) * 8
     * edx = output
     * r0..r7 = mm0..mm7
     */

#define C(x) AV_STRINGIFY(16*(x-1))"(%1)"
#define OC_8 "%2"

    /* at this point, function has completed dequantization + dezigzag +
     * partial transposition; now do the idct itself */
#define I(x) AV_STRINGIFY(16* x       )"(%0)"
#define J(x) AV_STRINGIFY(16*(x-4) + 8)"(%0)"

    __asm__ volatile (
        RowIDCT()
        Transpose()

#undef I
#undef J
#define I(x) AV_STRINGIFY(16* x    + 64)"(%0)"
#define J(x) AV_STRINGIFY(16*(x-4) + 72)"(%0)"

        RowIDCT()
        Transpose()

#undef I
#undef J
#define I(x) AV_STRINGIFY(16*x)"(%0)"
#define J(x) AV_STRINGIFY(16*x)"(%0)"

        ColumnIDCT()

#undef I
#undef J
#define I(x) AV_STRINGIFY(16*x + 8)"(%0)"
#define J(x) AV_STRINGIFY(16*x + 8)"(%0)"

        ColumnIDCT()
        :: "r"(output_data), "r"(ff_vp3_idct_data), "m"(ff_pw_8)
    );
#undef I
#undef J

}

void ff_vp3_idct_put_mmx(uint8_t *dest, int line_size, DCTELEM *block)
{
    ff_vp3_idct_mmx(block);
    put_signed_pixels_clamped_mmx(block, dest, line_size);
}

void ff_vp3_idct_add_mmx(uint8_t *dest, int line_size, DCTELEM *block)
{
    ff_vp3_idct_mmx(block);
    add_pixels_clamped_mmx(block, dest, line_size);
}

void ff_vp3_idct_dc_add_mmx2(uint8_t *dest, int linesize, const DCTELEM *block)
{
    int dc = (block[0] + 15) >> 5;

    __asm__ volatile(
        "movd          %3, %%mm0 \n\t"
        "pshufw $0, %%mm0, %%mm0 \n\t"
        "pxor       %%mm1, %%mm1 \n\t"
        "psubw      %%mm0, %%mm1 \n\t"
        "packuswb   %%mm0, %%mm0 \n\t"
        "packuswb   %%mm1, %%mm1 \n\t"

#define DC_ADD \
        "movq        (%0), %%mm2 \n\t" \
        "movq     (%0,%1), %%mm3 \n\t" \
        "paddusb    %%mm0, %%mm2 \n\t" \
        "movq   (%0,%1,2), %%mm4 \n\t" \
        "paddusb    %%mm0, %%mm3 \n\t" \
        "movq     (%0,%2), %%mm5 \n\t" \
        "paddusb    %%mm0, %%mm4 \n\t" \
        "paddusb    %%mm0, %%mm5 \n\t" \
        "psubusb    %%mm1, %%mm2 \n\t" \
        "psubusb    %%mm1, %%mm3 \n\t" \
        "movq       %%mm2, (%0)  \n\t" \
        "psubusb    %%mm1, %%mm4 \n\t" \
        "movq       %%mm3, (%0,%1) \n\t" \
        "psubusb    %%mm1, %%mm5 \n\t" \
        "movq       %%mm4, (%0,%1,2) \n\t" \
        "movq       %%mm5, (%0,%2) \n\t"

        DC_ADD
        "lea    (%0,%1,4), %0 \n\t"
        DC_ADD

        : "+r"(dest)
        : "r"((x86_reg)linesize), "r"((x86_reg)3*linesize), "r"(dc)
    );
}