view amr.c @ 5836:2997c88028cd libavformat

Move the probe loop from av_open_input_file() into its own method av_probe_input_buffer() so that it can be reused. Here are a few differences to the original way things were probed: - maximum probe buffer size can be specified as a parameter. - offset within the stream to probe from can be specified as a parameter. - instead of seeking back to the start each time a probe fails, stream data is appended to the reallocated buffer. This lowers the amount of data read from the stream (there is no repetition) and results in fewer closed and reopened streams (when seeking fails). New attempt after r22296, which was revert in r22315 due to a FATE failure. See the thread: Subject: [FFmpeg-devel] [PATCH] Move av_open_input_file probe loop to its own method Date: 2010-03-05 03:23:57 GMT Patch by Micah F. Galizia printf("%s%s@%s.%s", "micah", "galizia", "gmail", "com").

/*
 * amr file format
 * Copyright (c) 2001 ffmpeg project
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

/*
Write and read amr data according to RFC3267, http://www.ietf.org/rfc/rfc3267.txt?number=3267

Only mono files are supported.

*/
#include "avformat.h"

static const char AMR_header [] = "#!AMR\n";
static const char AMRWB_header [] = "#!AMR-WB\n";

#if CONFIG_AMR_MUXER
static int amr_write_header(AVFormatContext *s)
{
    ByteIOContext *pb = s->pb;
    AVCodecContext *enc = s->streams[0]->codec;

    s->priv_data = NULL;

    if (enc->codec_id == CODEC_ID_AMR_NB)
    {
        put_tag(pb, AMR_header);       /* magic number */
    }
    else if(enc->codec_id == CODEC_ID_AMR_WB)
    {
        put_tag(pb, AMRWB_header);       /* magic number */
    }
    else
    {
        return -1;
    }
    put_flush_packet(pb);
    return 0;
}

static int amr_write_packet(AVFormatContext *s, AVPacket *pkt)
{
    put_buffer(s->pb, pkt->data, pkt->size);
    put_flush_packet(s->pb);
    return 0;
}
#endif /* CONFIG_AMR_MUXER */

static int amr_probe(AVProbeData *p)
{
    //Only check for "#!AMR" which could be amr-wb, amr-nb.
    //This will also trigger multichannel files: "#!AMR_MC1.0\n" and
    //"#!AMR-WB_MC1.0\n" (not supported)

    if(memcmp(p->buf,AMR_header,5)==0)
        return AVPROBE_SCORE_MAX;
    else
        return 0;
}

/* amr input */
static int amr_read_header(AVFormatContext *s,
                           AVFormatParameters *ap)
{
    ByteIOContext *pb = s->pb;
    AVStream *st;
    uint8_t header[9];

    get_buffer(pb, header, 6);

    st = av_new_stream(s, 0);
    if (!st)
    {
        return AVERROR(ENOMEM);
    }
    if(memcmp(header,AMR_header,6)!=0)
    {
        get_buffer(pb, header+6, 3);
        if(memcmp(header,AMRWB_header,9)!=0)
        {
            return -1;
        }

        st->codec->codec_tag = MKTAG('s', 'a', 'w', 'b');
        st->codec->codec_id = CODEC_ID_AMR_WB;
        st->codec->sample_rate = 16000;
    }
    else
    {
        st->codec->codec_tag = MKTAG('s', 'a', 'm', 'r');
        st->codec->codec_id = CODEC_ID_AMR_NB;
        st->codec->sample_rate = 8000;
    }
    st->codec->channels = 1;
    st->codec->codec_type = CODEC_TYPE_AUDIO;
    av_set_pts_info(st, 64, 1, st->codec->sample_rate);

    return 0;
}

static int amr_read_packet(AVFormatContext *s,
                          AVPacket *pkt)
{
    AVCodecContext *enc = s->streams[0]->codec;
    int read, size = 0, toc, mode;

    if (url_feof(s->pb))
    {
        return AVERROR(EIO);
    }

//FIXME this is wrong, this should rather be in a AVParset
    toc=get_byte(s->pb);
    mode = (toc >> 3) & 0x0F;

    if (enc->codec_id == CODEC_ID_AMR_NB)
    {
        static const uint8_t packed_size[16] = {12, 13, 15, 17, 19, 20, 26, 31, 5, 0, 0, 0, 0, 0, 0, 0};

        size=packed_size[mode]+1;
    }
    else if(enc->codec_id == CODEC_ID_AMR_WB)
    {
        static uint8_t packed_size[16] = {18, 24, 33, 37, 41, 47, 51, 59, 61, 6, 6, 0, 0, 0, 1, 1};

        size=packed_size[mode];
    }
    else
    {
        assert(0);
    }

    if ( (size==0) || av_new_packet(pkt, size))
    {
        return AVERROR(EIO);
    }

    pkt->stream_index = 0;
    pkt->pos= url_ftell(s->pb);
    pkt->data[0]=toc;
    pkt->duration= enc->codec_id == CODEC_ID_AMR_NB ? 160 : 320;
    read = get_buffer(s->pb, pkt->data+1, size-1);

    if (read != size-1)
    {
        av_free_packet(pkt);
        return AVERROR(EIO);
    }

    return 0;
}

#if CONFIG_AMR_DEMUXER
AVInputFormat amr_demuxer = {
    "amr",
    NULL_IF_CONFIG_SMALL("3GPP AMR file format"),
    0, /*priv_data_size*/
    amr_probe,
    amr_read_header,
    amr_read_packet,
    NULL,
};
#endif

#if CONFIG_AMR_MUXER
AVOutputFormat amr_muxer = {
    "amr",
    NULL_IF_CONFIG_SMALL("3GPP AMR file format"),
    "audio/amr",
    "amr",
    0,
    CODEC_ID_AMR_NB,
    CODEC_ID_NONE,
    amr_write_header,
    amr_write_packet,
};
#endif