view bfi.c @ 5836:2997c88028cd libavformat

Move the probe loop from av_open_input_file() into its own method av_probe_input_buffer() so that it can be reused. Here are a few differences to the original way things were probed: - maximum probe buffer size can be specified as a parameter. - offset within the stream to probe from can be specified as a parameter. - instead of seeking back to the start each time a probe fails, stream data is appended to the reallocated buffer. This lowers the amount of data read from the stream (there is no repetition) and results in fewer closed and reopened streams (when seeking fails). New attempt after r22296, which was revert in r22315 due to a FATE failure. See the thread: Subject: [FFmpeg-devel] [PATCH] Move av_open_input_file probe loop to its own method Date: 2010-03-05 03:23:57 GMT Patch by Micah F. Galizia printf("%s%s@%s.%s", "micah", "galizia", "gmail", "com").
author stefano
date Sun, 14 Mar 2010 22:40:16 +0000
parents 49c1d3b27727
children 536e5527c1e0
line wrap: on
line source

/*
 * Brute Force & Ignorance (BFI) demuxer
 * Copyright (c) 2008 Sisir Koppaka
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

/**
 * @file libavformat/bfi.c
 * @brief Brute Force & Ignorance (.bfi) file demuxer
 * @author Sisir Koppaka ( sisir.koppaka at gmail dot com )
 * @sa http://wiki.multimedia.cx/index.php?title=BFI
 */

#include "libavutil/intreadwrite.h"
#include "avformat.h"

typedef struct BFIContext {
    int nframes;
    int audio_frame;
    int video_frame;
    int video_size;
    int avflag;
} BFIContext;

static int bfi_probe(AVProbeData * p)
{
    /* Check file header */
    if (AV_RL32(p->buf) == MKTAG('B', 'F', '&', 'I'))
        return AVPROBE_SCORE_MAX;
    else
        return 0;
}

static int bfi_read_header(AVFormatContext * s, AVFormatParameters * ap)
{
    BFIContext *bfi = s->priv_data;
    ByteIOContext *pb = s->pb;
    AVStream *vstream;
    AVStream *astream;
    int fps, chunk_header;

    /* Initialize the video codec... */
    vstream = av_new_stream(s, 0);
    if (!vstream)
        return AVERROR(ENOMEM);

    /* Initialize the audio codec... */
    astream = av_new_stream(s, 0);
    if (!astream)
        return AVERROR(ENOMEM);

    /* Set the total number of frames. */
    url_fskip(pb, 8);
    chunk_header           = get_le32(pb);
    bfi->nframes           = get_le32(pb);
    get_le32(pb);
    get_le32(pb);
    get_le32(pb);
    fps                    = get_le32(pb);
    url_fskip(pb, 12);
    vstream->codec->width  = get_le32(pb);
    vstream->codec->height = get_le32(pb);

    /*Load the palette to extradata */
    url_fskip(pb, 8);
    vstream->codec->extradata      = av_malloc(768);
    vstream->codec->extradata_size = 768;
    get_buffer(pb, vstream->codec->extradata,
               vstream->codec->extradata_size);

    astream->codec->sample_rate = get_le32(pb);

    /* Set up the video codec... */
    av_set_pts_info(vstream, 32, 1, fps);
    vstream->codec->codec_type = CODEC_TYPE_VIDEO;
    vstream->codec->codec_id   = CODEC_ID_BFI;
    vstream->codec->pix_fmt    = PIX_FMT_PAL8;

    /* Set up the audio codec now... */
    astream->codec->codec_type      = CODEC_TYPE_AUDIO;
    astream->codec->codec_id        = CODEC_ID_PCM_U8;
    astream->codec->channels        = 1;
    astream->codec->bits_per_coded_sample = 8;
    astream->codec->bit_rate        =
        astream->codec->sample_rate * astream->codec->bits_per_coded_sample;
    url_fseek(pb, chunk_header - 3, SEEK_SET);
    av_set_pts_info(astream, 64, 1, astream->codec->sample_rate);
    return 0;
}


static int bfi_read_packet(AVFormatContext * s, AVPacket * pkt)
{
    BFIContext *bfi = s->priv_data;
    ByteIOContext *pb = s->pb;
    int ret, audio_offset, video_offset, chunk_size, audio_size = 0;
    if (bfi->nframes == 0 || url_feof(pb)) {
        return AVERROR(EIO);
    }

    /* If all previous chunks were completely read, then find a new one... */
    if (!bfi->avflag) {
        uint32_t state = 0;
        while(state != MKTAG('S','A','V','I')){
            if (url_feof(pb))
                return AVERROR(EIO);
            state = 256*state + get_byte(pb);
        }
        /* Now that the chunk's location is confirmed, we proceed... */
        chunk_size      = get_le32(pb);
        get_le32(pb);
        audio_offset    = get_le32(pb);
        get_le32(pb);
        video_offset    = get_le32(pb);
        audio_size      = video_offset - audio_offset;
        bfi->video_size = chunk_size - video_offset;

        //Tossing an audio packet at the audio decoder.
        ret = av_get_packet(pb, pkt, audio_size);
        if (ret < 0)
            return ret;

        pkt->pts          = bfi->audio_frame;
        bfi->audio_frame += ret;
    }

    else {

        //Tossing a video packet at the video decoder.
        ret = av_get_packet(pb, pkt, bfi->video_size);
        if (ret < 0)
            return ret;

        pkt->pts          = bfi->video_frame;
        bfi->video_frame += ret / bfi->video_size;

        /* One less frame to read. A cursory decrement. */
        bfi->nframes--;
    }

    bfi->avflag       = !bfi->avflag;
    pkt->stream_index = bfi->avflag;
    return ret;
}

AVInputFormat bfi_demuxer = {
    "bfi",
    NULL_IF_CONFIG_SMALL("Brute Force & Ignorance"),
    sizeof(BFIContext),
    bfi_probe,
    bfi_read_header,
    bfi_read_packet,
};