view rtpdec_amr.c @ 5786:7d670040187e libavformat

In mpegts muxer, search for h264 aud nal, it might not be the first nal. Improve ther error message when bitstream is malformated and tell user to use the bitstream filter.
author bcoudurier
date Mon, 08 Mar 2010 23:59:05 +0000
parents 484fceabfad2
children 7d952a85947b
line wrap: on
line source

/*
 * RTP AMR Depacketizer, RFC 3267
 * Copyright (c) 2010 Martin Storsjo
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

#include "avformat.h"
#include "rtpdec_amr.h"
#include "libavutil/avstring.h"

static const uint8_t frame_sizes_nb[16] = {
    12, 13, 15, 17, 19, 20, 26, 31, 5, 0, 0, 0, 0, 0, 0, 0
};
static const uint8_t frame_sizes_wb[16] = {
    17, 23, 32, 36, 40, 46, 50, 58, 60, 5, 5, 0, 0, 0, 0, 0
};

static int amr_handle_packet(AVFormatContext *ctx,
                             PayloadContext *data,
                             AVStream *st,
                             AVPacket * pkt,
                             uint32_t * timestamp,
                             const uint8_t * buf,
                             int len, int flags)
{
    const uint8_t *frame_sizes = NULL;
    int frames;
    int i;
    const uint8_t *speech_data;
    uint8_t *ptr;

    if (st->codec->codec_id == CODEC_ID_AMR_NB) {
        frame_sizes = frame_sizes_nb;
    } else if (st->codec->codec_id == CODEC_ID_AMR_WB) {
        frame_sizes = frame_sizes_wb;
    } else {
        av_log(ctx, AV_LOG_ERROR, "Bad codec ID\n");
        return AVERROR_INVALIDDATA;
    }

    if (st->codec->channels != 1) {
        av_log(ctx, AV_LOG_ERROR, "Only mono AMR is supported\n");
        return AVERROR_INVALIDDATA;
    }

    /* The AMR RTP packet consists of one header byte, followed
     * by one TOC byte for each AMR frame in the packet, followed
     * by the speech data for all the AMR frames.
     *
     * The header byte contains only a codec mode request, for
     * requesting what kind of AMR data the sender wants to
     * receive. Not used at the moment.
     */

    /* Count the number of frames in the packet. The highest bit
     * is set in a TOC byte if there are more frames following.
     */
    for (frames = 1; frames < len && (buf[frames] & 0x80); frames++) ;

    if (1 + frames >= len) {
        /* We hit the end of the packet while counting frames. */
        av_log(ctx, AV_LOG_ERROR, "No speech data found\n");
        return AVERROR_INVALIDDATA;
    }

    speech_data = buf + 1 + frames;

    /* Everything except the codec mode request byte should be output. */
    if (av_new_packet(pkt, len - 1)) {
        av_log(ctx, AV_LOG_ERROR, "Out of memory\n");
        return AVERROR_NOMEM;
    }
    pkt->stream_index = st->index;
    ptr = pkt->data;

    for (i = 0; i < frames; i++) {
        uint8_t toc = buf[1 + i];
        int frame_size = frame_sizes[(toc >> 3) & 0x0f];

        if (speech_data + frame_size > buf + len) {
            /* Too little speech data */
            av_log(ctx, AV_LOG_WARNING, "Too little speech data in the RTP packet\n");
            /* Set the unwritten part of the packet to zero. */
            memset(ptr, 0, pkt->data + pkt->size - ptr);
            pkt->size = ptr - pkt->data;
            return 0;
        }

        /* Extract the AMR frame mode from the TOC byte */
        *ptr++ = toc & 0x7C;

        /* Copy the speech data */
        memcpy(ptr, speech_data, frame_size);
        speech_data += frame_size;
        ptr += frame_size;
    }

    if (speech_data < buf + len) {
        av_log(ctx, AV_LOG_WARNING, "Too much speech data in the RTP packet?\n");
        /* Set the unwritten part of the packet to zero. */
        memset(ptr, 0, pkt->data + pkt->size - ptr);
        pkt->size = ptr - pkt->data;
    }

    return 0;
}

static int amr_parse_sdp_line(AVFormatContext *s, int st_index,
                              PayloadContext *data, const char *line)
{
    const char *p;
    char attr[25], value[25];

    /* Parse an fmtp line this one:
     * a=fmtp:97 octet-align=1; interleaving=0
     * That is, a normal fmtp: line followed by semicolon & space
     * separated key/value pairs.
     */
    if (av_strstart(line, "fmtp:", &p)) {
        int octet_align = 0;
        int crc = 0;
        int interleaving = 0;
        int channels = 1;

        while (*p && *p == ' ') p++; /* strip spaces */
        while (*p && *p != ' ') p++; /* eat protocol identifier */
        while (*p && *p == ' ') p++; /* strip trailing spaces */

        while (ff_rtsp_next_attr_and_value(&p, attr, sizeof(attr), value, sizeof(value))) {
            if (!strcmp(attr, "octet-align"))
                octet_align = atoi(value);
            else if (!strcmp(attr, "crc"))
                crc = atoi(value);
            else if (!strcmp(attr, "interleaving"))
                interleaving = atoi(value);
            else if (!strcmp(attr, "channels"))
                channels = atoi(value);
        }
        if (!octet_align || crc || interleaving || channels != 1) {
            av_log(s, AV_LOG_ERROR, "Unsupported RTP/AMR configuration!\n");
            return -1;
        }
    }
    return 0;
}

RTPDynamicProtocolHandler ff_amr_nb_dynamic_handler = {
    .enc_name         = "AMR",
    .codec_type       = CODEC_TYPE_AUDIO,
    .codec_id         = CODEC_ID_AMR_NB,
    .parse_sdp_a_line = amr_parse_sdp_line,
    .parse_packet     = amr_handle_packet,
};

RTPDynamicProtocolHandler ff_amr_wb_dynamic_handler = {
    .enc_name         = "AMR-WB",
    .codec_type       = CODEC_TYPE_AUDIO,
    .codec_id         = CODEC_ID_AMR_WB,
    .parse_sdp_a_line = amr_parse_sdp_line,
    .parse_packet     = amr_handle_packet,
};