view decoder.c @ 10:6f0fb88d1463 src

Added some debug info, to hopefully help in tracking bugs in libdvdnav.

/*
 * Copyright (C) 2000, 2001 Martin Norbäck, Håkan Hjort
 * 
 * This file is part of libdvdnav, a DVD navigation library. It is modified
 * from a file originally part of the Ogle DVD player.
 * 
 * libdvdnav is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 * 
 * libdvdnav is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA
 *
 * $Id$
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdio.h>
#include <inttypes.h>
#include <string.h>  /* For memset */
#include <dvdread/ifo_types.h> /* vm_cmd_t */
#include <assert.h>
#include "vmcmd.h"
#include "decoder.h"

#ifndef bool
typedef int bool;
#endif

typedef struct
{
  uint8_t bits[8];
  uint8_t examined[8];
} cmd_t;

/*  Fix theses two.. pass as parameters instead. */
static cmd_t cmd;
static registers_t *state;

/* Get count bits of command from byte and bit position. */
static uint32_t bits(int byte, int bit, int count) {
  uint32_t val = 0;
  uint8_t bit_mask;
  
  while(count--) {
    if(bit > 7) {
      bit = 0;
      byte++;
    }
    bit_mask = 0x01 << (7 - bit);
    val <<= 1;
    if(cmd.bits[byte] & bit_mask)
      val |= 1;
    cmd.examined[byte] |= bit_mask;
    bit++;
  }
  return val;
}


/* Eval register code, can either be system or general register.
   SXXX_XXXX, where S is 1 if it is system register. */
static uint16_t eval_reg(uint8_t reg) {
  if(reg & 0x80) {
    return state->SPRM[reg & 0x1f]; /*  FIXME max 24 not 32 */
  } else {
    return state->GPRM[reg & 0x0f];
  }
}

/* Eval register or immediate data.
   AAAA_AAAA BBBB_BBBB, if immediate use all 16 bits for data else use
   lower eight bits for the system or general purpose register. */
static uint16_t eval_reg_or_data(int imm, int byte) {
  if(imm) { /*  immediate */
    return bits(byte, 0, 16);
  } else {
    return eval_reg(bits(byte + 1, 0, 8));
  }
}

/* Eval register or immediate data.
   xBBB_BBBB, if immediate use all 7 bits for data else use
   lower four bits for the general purpose register number. */
/* Evaluates gprm or data depending on bit, data is in byte n */
uint16_t eval_reg_or_data_2(int imm, int byte) {
  if(imm) /* immediate */
    return bits(byte, 1, 7);
  else
    return state->GPRM[bits(byte, 4, 4)];
}


/* Compare data using operation, return result from comparison. 
   Helper function for the different if functions. */
static bool eval_compare(uint8_t operation, uint16_t data1, uint16_t data2) {
  switch(operation) {
    case 1:
      return data1 & data2;
    case 2:
      return data1 == data2;
    case 3:
      return data1 != data2;
    case 4:
      return data1 >= data2;
    case 5:
      return data1 >  data2;
    case 6:
      return data1 <= data2;
    case 7:
      return data1 <  data2;
  }
  fprintf(stderr,"eval_compare: Invalid comparison code\n");
  return 0;
}


/* Evaluate if version 1.
   Has comparison data in byte 3 and 4-5 (immediate or register) */
static bool eval_if_version_1(void) {
  uint8_t op = bits(1, 1, 3);
  if(op) {
    return eval_compare(op, eval_reg(bits(3, 0, 8)), 
                            eval_reg_or_data(bits(1, 0, 1), 4));
  }
  return 1;
}

/* Evaluate if version 2.
   This version only compares register which are in byte 6 and 7 */
static bool eval_if_version_2(void) {
  uint8_t op = bits(1, 1, 3);
  if(op) {
    return eval_compare(op, eval_reg(bits(6, 0, 8)), 
                            eval_reg(bits(7, 0, 8)));
  }
  return 1;
}

/* Evaluate if version 3.
   Has comparison data in byte 2 and 6-7 (immediate or register) */
static bool eval_if_version_3(void) {
  uint8_t op = bits(1, 1, 3);
  if(op) {
    return eval_compare(op, eval_reg(bits(2, 0, 8)), 
                            eval_reg_or_data(bits(1, 0, 1), 6));
  }
  return 1;
}

/* Evaluate if version 4.
   Has comparison data in byte 1 and 4-5 (immediate or register) 
   The register in byte 1 is only the lowe nibble (4bits) */
static bool eval_if_version_4(void) {
  uint8_t op = bits(1, 1, 3);
  if(op) {
    return eval_compare(op, eval_reg(bits(1, 4, 4)), 
                            eval_reg_or_data(bits(1, 0, 1), 4));
  }
  return 1;
}

/* Evaluate special instruction.... returns the new row/line number,
   0 if no new row and 256 if Break. */
static int eval_special_instruction(bool cond) {
  int line, level;
  
  switch(bits(1, 4, 4)) {
    case 0: /*  NOP */
      line = 0;
      return cond ? line : 0;
    case 1: /*  Goto line */
      line = bits(7, 0, 8);
      return cond ? line : 0;
    case 2: /*  Break */
      /*  max number of rows < 256, so we will end this set */
      line = 256;
      return cond ? 256 : 0;
    case 3: /*  Set temporary parental level and goto */
      line = bits(7, 0, 8); 
      level = bits(6, 4, 4);
      if(cond) {
	/*  This always succeeds now, if we want real parental protection */
	/*  we need to ask the user and have passwords and stuff. */
	state->SPRM[13] = level;
      }
      return cond ? line : 0;
  }
  return 0;
}

/* Evaluate link by subinstruction.
   Return 1 if link, or 0 if no link
   Actual link instruction is in return_values parameter */
static bool eval_link_subins(bool cond, link_t *return_values) {
  uint16_t button = bits(6, 0, 6);
  uint8_t  linkop = bits(7, 3, 5);
  
  if(linkop > 0x10)
    return 0;    /*  Unknown Link by Sub-Instruction command */

  /*  Assumes that the link_cmd_t enum has the same values as the LinkSIns codes */
  return_values->command = linkop;
  return_values->data1 = button;
  return cond;
}


/* Evaluate link instruction.
   Return 1 if link, or 0 if no link
   Actual link instruction is in return_values parameter */
static bool eval_link_instruction(bool cond, link_t *return_values) {
  uint8_t op = bits(1, 4, 4);
  
  switch(op) {
    case 1:
	return eval_link_subins(cond, return_values);
    case 4:
	return_values->command = LinkPGCN;
	return_values->data1   = bits(6, 1, 15);
	return cond;
    case 5:
	return_values->command = LinkPTTN;
	return_values->data1 = bits(6, 6, 10);
	return_values->data2 = bits(6, 0, 6);
	return cond;
    case 6:
	return_values->command = LinkPGN;
	return_values->data1 = bits(7, 1, 7);
	return_values->data2 = bits(6, 0, 6);
	return cond;
    case 7:
	return_values->command = LinkCN;
	return_values->data1 = bits(7, 0, 8);
	return_values->data2 = bits(6, 0, 6);
	return cond;
  }
  return 0;
}


/* Evaluate a jump instruction.
   returns 1 if jump or 0 if no jump
   actual jump instruction is in return_values parameter */
static bool eval_jump_instruction(bool cond, link_t *return_values) {
  
  switch(bits(1, 4, 4)) {
    case 1:
      return_values->command = Exit;
      return cond;
    case 2:
      return_values->command = JumpTT;
      return_values->data1 = bits(5, 1, 7);
      return cond;
    case 3:
      return_values->command = JumpVTS_TT;
      return_values->data1 = bits(5, 1, 7);
      return cond;
    case 5:
      return_values->command = JumpVTS_PTT;
      return_values->data1 = bits(5, 1, 7);
      return_values->data2 = bits(2, 6, 10);
      return cond;
    case 6:
      switch(bits(5,0,2)) {
        case 0:
          return_values->command = JumpSS_FP;
          return cond;
        case 1:
          return_values->command = JumpSS_VMGM_MENU;
          return_values->data1 =  bits(5, 4, 4);
          return cond;
        case 2:
          return_values->command = JumpSS_VTSM;
          return_values->data1 =  bits(4, 0, 8);
          return_values->data2 =  bits(3, 0, 8);
          return_values->data3 =  bits(5, 4, 4);
          return cond;
        case 3:
          return_values->command = JumpSS_VMGM_PGC;
          return_values->data1 =  bits(2, 1, 15);
          return cond;
        }
      break;
    case 8:
      switch(bits(5,0,2)) {
        case 0:
          return_values->command = CallSS_FP;
          return_values->data1 = bits(4, 0, 8);
          return cond;
        case 1:
          return_values->command = CallSS_VMGM_MENU;
          return_values->data1 = bits(5, 4, 4);
          return_values->data2 = bits(4, 0 ,8);
          return cond;
        case 2:
          return_values->command = CallSS_VTSM;
          return_values->data1 = bits(5, 4, 4);
          return_values->data2 = bits(4, 0, 8);
          return cond;
        case 3:
          return_values->command = CallSS_VMGM_PGC;
          return_values->data1 = bits(2, 1, 15);
          return_values->data2 = bits(4, 0, 8);
          return cond;
      }
      break;
  }
  return 0;
}

/* Evaluate a set sytem register instruction 
   May contain a link so return the same as eval_link */
static bool eval_system_set(int cond, link_t *return_values) {
  int i;
  uint16_t data, data2;
  
  switch(bits(0, 4, 4)) {
    case 1: /*  Set system reg 1 &| 2 &| 3 (Audio, Subp. Angle) */
      for(i = 1; i <= 3; i++) {
        if(bits(2 + i, 0, 1)) {
          data = eval_reg_or_data_2(bits(0, 3, 1), 2 + i);
          if(cond) {
            state->SPRM[i] = data;
          }
        }
      }
      break;
    case 2: /*  Set system reg 9 & 10 (Navigation timer, Title PGC number) */
      data = eval_reg_or_data(bits(0, 3, 1), 2);
      data2 = bits(5, 0, 8); /*  ?? size */
      if(cond) {
	state->SPRM[9] = data; /*  time */
	state->SPRM[10] = data2; /*  pgcN */
      }
      break;
    case 3: /*  Mode: Counter / Register + Set */
      data = eval_reg_or_data(bits(0, 3, 1), 2);
      data2 = bits(5, 4, 4);
      if(bits(5, 0, 1)) {
	fprintf(stderr, "Detected SetGPRMMD Counter!! This is unsupported.\n");
	state->GPRM_mode[data2] = 1;
      } else {
	fprintf(stderr, "Detected ResetGPRMMD Counter!! This is unsupported.\n");
	state->GPRM_mode[data2] = 0;
      }
      if(cond) {
	state->GPRM[data2] = data;
      }
      break;
    case 6: /*  Set system reg 8 (Highlighted button) */
      data = eval_reg_or_data(bits(0, 3, 1), 4); /*  Not system reg!! */
      if(cond) {
	state->SPRM[8] = data;
      }
      break;
  }
  if(bits(1, 4, 4)) {
    return eval_link_instruction(cond, return_values);
  }
  return 0;
}


/* Evaluate set operation
   Sets the register given to the value indicated by op and data.
   For the swap case the contents of reg is stored in reg2.
*/
static void eval_set_op(int op, int reg, int reg2, int data) {
  switch(op) {
    case 1:
      state->GPRM[reg] = data;
      break;
    case 2: /* SPECIAL CASE - SWAP! */
      state->GPRM[reg2] = state->GPRM[reg];
      state->GPRM[reg] = data;
      break;
    case 3:
      state->GPRM[reg] += data;
      break;
    case 4:
      state->GPRM[reg] -= data;
      break;
    case 5:
      state->GPRM[reg] *= data;
      break;
    case 6:
      state->GPRM[reg] /= data;
      break;
    case 7:
      state->GPRM[reg] %= data;
      break;
    case 8: /* SPECIAL CASE - RND! */
      state->GPRM[reg] += data; /*  TODO FIXME */
      break;
    case 9:
      state->GPRM[reg] &= data;
      break;
    case 10:
      state->GPRM[reg] |= data;
      break;
    case 11:
      state->GPRM[reg] ^= data;
      break;
  }
}

/* Evaluate set instruction, combined with either Link or Compare. */
static void eval_set_version_1(int cond) {
  uint8_t  op   = bits(0, 4, 4);
  uint8_t  reg  = bits(3, 4, 4); /*  Erhumm.. */
  uint8_t  reg2 = bits(5, 4, 4);
  uint16_t data = eval_reg_or_data(bits(0, 3, 1), 4);

  if(cond) {
    eval_set_op(op, reg, reg2, data);
  }
}


/* Evaluate set instruction, combined with both Link and Compare. */
static void eval_set_version_2(int cond) {
  uint8_t  op   = bits(0, 4, 4);
  uint8_t  reg  = bits(1, 4, 4);
  uint8_t  reg2 = bits(3, 4, 4); /*  Erhumm.. */
  uint16_t data = eval_reg_or_data(bits(0, 3, 1), 2);

  if(cond) {
    eval_set_op(op, reg, reg2, data);
  }
}


/* Evaluate a command
   returns row number of goto, 0 if no goto, -1 if link.
   Link command in return_values */
static int eval_command(uint8_t *bytes, link_t *return_values) {
  int i, extra_bits;
  int cond, res = 0;

  for(i = 0; i < 8; i++) {
    cmd.bits[i] = bytes[i];
    cmd.examined[i] = 0;
  }
  memset(return_values, 0, sizeof(link_t));

  switch(bits(0, 0, 3)) { /* three first bits */
    case 0: /*  Special instructions */
      cond = eval_if_version_1();
      res = eval_special_instruction(cond);
      if(res == -1) {
	fprintf(stderr, "Unknown Instruction!\n");
	assert(0);
      }
      break;
    case 1: /*  Link/jump instructions */
      if(bits(0, 3, 1)) {
        cond = eval_if_version_2();
        res = eval_jump_instruction(cond, return_values);
      } else {
        cond = eval_if_version_1();
        res = eval_link_instruction(cond, return_values);
      }
      if(res)
	res = -1;
      break;
    case 2: /*  System set instructions */
      cond = eval_if_version_2();
      res = eval_system_set(cond, return_values);
      if(res)
	res = -1;
      break;
    case 3: /*  Set instructions, either Compare or Link may be used */
      cond = eval_if_version_3();
      eval_set_version_1(cond);
      if(bits(1, 4, 4)) {
	res = eval_link_instruction(cond, return_values);
      }
      if(res)
	res = -1;
      break;
    case 4: /*  Set, Compare -> Link Sub-Instruction */
      eval_set_version_2(/*True*/ 1);
      cond = eval_if_version_4();
      res = eval_link_subins(cond, return_values);
      if(res)
	res = -1;
      break;
    case 5: /*  Compare -> (Set and Link Sub-Instruction) */
      cond = eval_if_version_4();
      eval_set_version_2(cond);
      res = eval_link_subins(cond, return_values);
      if(res)
	res = -1;
      break;
    case 6: /*  Compare -> Set, allways Link Sub-Instruction */
      cond = eval_if_version_4();
      eval_set_version_2(cond);
      res = eval_link_subins(/*True*/ 1, return_values);
      if(res)
	res = -1;
      break;
  }
  /*  Check if there are bits not yet examined */

  extra_bits = 0;
  for(i = 0; i < 8; i++)
    if(cmd.bits [i] & ~cmd.examined [i]) {
      extra_bits = 1;
      break;
    }
  if(extra_bits) {
    fprintf(stderr, "[WARNING, unknown bits:");
    for(i = 0; i < 8; i++)
      fprintf(stderr, " %02x", cmd.bits [i] & ~cmd.examined [i]);
    fprintf(stderr, "]\n");
  }

  return res;
}

/* Evaluate a set of commands in the given register set (which is
 * modified */
int vmEval_CMD(vm_cmd_t commands[], int num_commands, 
	       registers_t *registers, link_t *return_values) {
  int i = 0;
  int total = 0;
  
  state = registers; /*  TODO FIXME */

#ifdef TRACE
  /*  DEBUG */
  fprintf(stderr, "libdvdnav: Registers before transaction\n");
  vmPrint_registers( registers );
  if(1) {
    int i;
    fprintf(stderr, "libdvdnav: Full list of commands to execute\n");
    for(i = 0; i < num_commands; i++)
      vmPrint_CMD(i, &commands[i]);
    fprintf(stderr, "--------------------------------------------\n");
  } /*  end DEBUG */
  if (1) {
    fprintf(stderr, "libdvdnav: Single stepping commands\n");
  }
#endif
  
  while(i < num_commands && total < 100000) {
    int line;
    
#ifdef TRACE
    if(1) vmPrint_CMD(i, &commands[i]);
#endif
    line = eval_command(&commands[i].bytes[0], return_values);
    
    if (line < 0) { /*  Link command */
#ifdef TRACE
      fprintf(stderr, "libdvdnav: Registers after transaction\n");
      vmPrint_registers( registers );
#endif
      fprintf(stderr, "eval: Doing Link/Jump/Call\n"); 
      return 1;
    }
    
    if (line > 0) /*  Goto command */
      i = line - 1;
    else /*  Just continue on the next line */
      i++;

    total++;
  }
  
  memset(return_values, 0, sizeof(link_t));
#ifdef TRACE
  fprintf(stderr, "libdvdnav: Registers after transaction\n");
  vmPrint_registers( registers );
#endif
  return 0;
}

static char *linkcmd2str(link_cmd_t cmd) {
  switch(cmd) {
  case LinkNoLink:
    return "LinkNoLink";
  case LinkTopC:
    return "LinkTopC";
  case LinkNextC:
    return "LinkNextC";
  case LinkPrevC:
    return "LinkPrevC";
  case LinkTopPG:
    return "LinkTopPG";
  case LinkNextPG:
    return "LinkNextPG";
  case LinkPrevPG:
    return "LinkPrevPG";
  case LinkTopPGC:
    return "LinkTopPGC";
  case LinkNextPGC:
    return "LinkNextPGC";
  case LinkPrevPGC:
    return "LinkPrevPGC";
  case LinkGoUpPGC:
    return "LinkGoUpPGC";
  case LinkTailPGC:
    return "LinkTailPGC";
  case LinkRSM:
    return "LinkRSM";
  case LinkPGCN:
    return "LinkPGCN";
  case LinkPTTN:
    return "LinkPTTN";
  case LinkPGN:
    return "LinkPGN";
  case LinkCN:
    return "LinkCN";
  case Exit:
    return "Exit";
  case JumpTT:
    return "JumpTT";
  case JumpVTS_TT:
    return "JumpVTS_TT";
  case JumpVTS_PTT:
    return "JumpVTS_PTT";
  case JumpSS_FP:
    return "JumpSS_FP";
  case JumpSS_VMGM_MENU:
    return "JumpSS_VMGM_MENU";
  case JumpSS_VTSM:
    return "JumpSS_VTSM";
  case JumpSS_VMGM_PGC:
    return "JumpSS_VMGM_PGC";
  case CallSS_FP:
    return "CallSS_FP";
  case CallSS_VMGM_MENU:
    return "CallSS_VMGM_MENU";
  case CallSS_VTSM:
    return "CallSS_VTSM";
  case CallSS_VMGM_PGC:
    return "CallSS_VMGM_PGC";
  case PlayThis:
    return "PlayThis";
  }
  return "*** (bug)";
}

void vmPrint_LINK(link_t value) {
  char *cmd = linkcmd2str(value.command);
    
  switch(value.command) {
  case LinkNoLink:
  case LinkTopC:
  case LinkNextC:
  case LinkPrevC:
  case LinkTopPG:
  case LinkNextPG:
  case LinkPrevPG:
  case LinkTopPGC:
  case LinkNextPGC:
  case LinkPrevPGC:
  case LinkGoUpPGC:
  case LinkTailPGC:
  case LinkRSM:
    fprintf(stderr, "%s (button %d)\n", cmd, value.data1);
    break;
  case LinkPGCN:
  case JumpTT:
  case JumpVTS_TT:
  case JumpSS_VMGM_MENU: /*  == 2 -> Title Menu */
  case JumpSS_VMGM_PGC:
    fprintf(stderr, "%s %d\n", cmd, value.data1);
    break;
  case LinkPTTN:
  case LinkPGN:
  case LinkCN:
    fprintf(stderr, "%s %d (button %d)\n", cmd, value.data1, value.data2);
    break;
  case Exit:
  case JumpSS_FP:
  case PlayThis: /*  Humm.. should we have this at all.. */
    fprintf(stderr, "%s\n", cmd);
    break;
  case JumpVTS_PTT:
    fprintf(stderr, "%s %d:%d\n", cmd, value.data1, value.data2);
    break;
  case JumpSS_VTSM:
    fprintf(stderr, "%s vts %d title %d menu %d\n", 
	    cmd, value.data1, value.data2, value.data3);
    break;
  case CallSS_FP:
    fprintf(stderr, "%s resume cell %d\n", cmd, value.data1);
    break;
  case CallSS_VMGM_MENU: /*  == 2 -> Title Menu */
  case CallSS_VTSM:
    fprintf(stderr, "%s %d resume cell %d\n", cmd, value.data1, value.data2);
    break;
  case CallSS_VMGM_PGC:
    fprintf(stderr, "%s %d resume cell %d\n", cmd, value.data1, value.data2);
    break;
  }
 }

void vmPrint_registers( registers_t *registers ) {
  int i;
  fprintf(stderr, "   #   ");
  for(i = 0; i < 24; i++)
    fprintf(stderr, " %2d |", i);
  fprintf(stderr, "\nSRPMS: ");
  for(i = 0; i < 24; i++)
    fprintf(stderr, "%04x|", registers->SPRM[i]);
  fprintf(stderr, "\nGRPMS: ");
  for(i = 0; i < 16; i++)
    fprintf(stderr, "%04x|", registers->GPRM[i]);
  fprintf(stderr, "\nGmode: ");
  for(i = 0; i < 16; i++)
    fprintf(stderr, "%04x|", registers->GPRM_mode[i]);
  fprintf(stderr, "\n");
}