annotate TVout/matroxtv @ 8347:03ee1d7deba5

PSNR

#!/bin/sh
#
# Gabucino - no warranty, this script can BOOM your TV and/or monitor, or else.
# v2.0
# This script has been tested and configured on a Matrox G400DH and a PAL TV.
#
# INSTALLATION:
#	1. READ MPLAYER'S TVOUT DOCUMENTATION!
#	2. Edit 'defaultmode', 'TVdefaultmode', and 'SetTVstandard' functions
#	   below to fit your needs.
#	3. Remove 'exit 1' safety check.
#

function defaultmode {
	# You can choose the mode to use in monitor-only mode
	# 640x480 60Hz 32bpp	(14" monitors)
	fbset -a -xres 640 -yres 480 -vxres 640 -vyres 480 -depth 32 -pixclock 39721 -left 48 -right 16 -upper 33 -lower 10 -hslen 96 -vslen 2 -hsync high -accel true
	# 768x576 60Hz 32bpp	(14" monitors)
	# fbset -a -xres 768 -yres 576 -vxres 768 -vyres 5460 -depth 32 -pixclock 26101 -left 144 -right 16 -upper 28 -lower 6 -hslen 112 -vslen 4 -accel true
	# 800x600 76Hz 32bpp	(15" monitors)
	# fbset -a -xres 800 -yres 600 -vxres 800 -vyres 1440 -depth 32 -pixclock 20000 -left 128 -right 16 -upper 24 -lower 2 -hslen 96 -vslen 6
	# 1024x768 70Hz 32bpp	(15" monitors)
	# fbset -a -xres 1024 -yres 768 -vxres 1024 -vyres 1440 -depth 32 -pixclock 12500 -left 144 -right 32 -upper 30 -lower 2 -hslen 192 -vslen 6
}

function TVdefaultmode {

	##
	## PAL modes
	##

	# 640x512 80Hz 32bpp
	fbset -depth 32 -left 60 -right 0 -upper 70 -lower 39 -hslen 76 -vslen 4 -xres 640 -yres 512 -bcast true
	# 640x528 83Hz 32bpp
	# fbset -depth 32 -left 40 -right 0 -upper 63 -lower 29 -hslen 56 -vslen 4 -xres 640 -yres 528 -vxres 640 -vyres 528 -laced false -bcast true
	# 720x576 78Hz 32bpp
	# fbset -depth 32 -left 54 -right -36 -upper 55 -lower -6 -hslen 46 -vslen 4 -xres 720 -yres 576 -vxres 720 -vyres 576 -laced false -bcast true

	##
	## NTSC modes
	##

	# 640x240 non-interlaced 32bpp
	# fbset -depth 32 -xres 640 -yres 240 -vxres 640 -vyres 240 -pixclock 79443 -left 72 -right 40 -upper 15 -lower 5 -hslen 48 -vslen 3
	# 640x480 interlaced 32bpp
	# fbset -depth 32 -xres 640 -yres 480 -vxres 640 -vyres 480 -pixclock 79443 -left 72 -right 40 -upper 30 -lower 10 -hslen 48 -vslen 5 -laced true
}

function SetTVstandard {
	matroxset 1		# PAL
	# matroxset 2		# NTSC
}
	
echo
echo "Please read MPlayer's TV-out documentation, and install 'matroxset' and 'fbset'."
echo "Then edit this script to suit your monitor+TV set."
echo
exit 1

while [ 1 ]; do

clear

echo " [ 0 ]    Clear & blank screen"
echo " [ 1 ]    Monitor only"
echo "                          /---> Monitor"
echo " [ 2 ]    DualHead - CRTC1"
echo "                          \\---> TV"

echo

echo " [ A ]	640x512		PAL"
echo " [ S ]	640x528		PAL"
echo " [ D ]	720x576		PAL"
echo " [ F ]	640x240		NTSC"
echo " [ G ]	640x480		NTSC, Interlaced"

read ABC

case "$ABC" in
	0)
	clear
	setterm -cursor off
	setterm -blank 0
	read
	;;

	1)
	matroxset -f /dev/fb1 -m 0
	matroxset -f /dev/fb0 -m 1
	defaultmode
	echo
	;;

	2)
	matroxset -f /dev/fb1 -m 0
	matroxset -f /dev/fb0 -m 3
	SetTVstandard
	TVdefaultmode
	;;

	a)
	# 640x512 80Hz 32bpp
	fbset -depth 32 -left 60 -right 0 -upper 70 -lower 39 -hslen 76 -vslen 4 -xres 640 -yres 512 -bcast true
	;;

	s)
	# 640x528 83Hz 32bpp
	fbset -depth 32 -left 40 -right 0 -upper 63 -lower 29 -hslen 56 -vslen 4 -xres 640 -yres 528 -vxres 640 -vyres 528 -laced false -bcast true
	;;

	d)
	# 720x576 78Hz 32bpp
	fbset -depth 32 -left 54 -right -36 -upper 55 -lower -6 -hslen 46 -vslen 4 -xres 720 -yres 576 -vxres 720 -vyres 576 -laced false -bcast true
	;;

	f)
	# 640x240 non-interlaced 32bpp
	fbset -depth 32 -xres 640 -yres 240 -vxres 640 -vyres 240 -pixclock 79443 -left 72 -right 40 -upper 15 -lower 5 -hslen 48 -vslen 3
	;;

	g)
	# 640x480 interlaced 32bpp
	fbset -depth 32 -xres 640 -yres 480 -vxres 640 -vyres 480 -pixclock 79443 -left 72 -right 40 -upper 30 -lower 10 -hslen 48 -vslen 5 -laced true
	;;
esac

done