annotate libvo/vo_directfb2.c @ 33259:04dc3e55cd90

Increase the maximum value of the DVB timeout to 240 seconds. Some devices may need more time for the initial tune (e.g. firmware loading). Let the user specify higher timeout value if there is need to. The default remains 30 seconds.

/*
 * MPlayer video driver for DirectFramebuffer device
 *
 * copyright (C) 2002 Jiri Svoboda <[e-mail]>
 *
 * based on vo_directfb2.c
 *
 * This file is part of MPlayer.
 *
 * MPlayer is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * MPlayer is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with MPlayer; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#include <directfb.h>
#include <directfb_version.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <libavutil/common.h>

#include "config.h"
#include "video_out.h"
#include "video_out_internal.h"
#include "fastmemcpy.h"
#include "sub/sub.h"
#include "mp_msg.h"
#include "aspect.h"
#include "subopt-helper.h"
#include "mp_fifo.h"

// triple buffering
#define TRIPLE 1

static const vo_info_t info = {
	"Direct Framebuffer Device",
	"directfb",
	"Jiri Svoboda [e-mail]",
	"v 2.0 (for DirectFB version >=0.9.22)"
};

const LIBVO_EXTERN(directfb)

/******************************
*      vo_directfb globals    *
******************************/

#define DFBCHECK(x...)                                         \
  {                                                            \
    DFBResult err = x;                                         \
                                                               \
    if (err != DFB_OK)                                         \
      {                                                        \
        fprintf( stderr, "%s <%d>:\n\t", __FILE__, __LINE__ ); \
        DirectFBErrorFatal( #x, err );                         \
      }                                                        \
  }

 /*
 *  filled by preinit
 */

// main DirectFB handle
static IDirectFB *dfb = NULL;
// keyboard handle
static IDirectFBInputDevice *keyboard = NULL;
// A buffer for input events.
static IDirectFBEventBuffer *buffer = NULL;

 /*
 *  filled during config
 */

// handle of used layer
static IDirectFBDisplayLayer *layer = NULL;
// surface of used layer
static IDirectFBSurface *primary = NULL;
static int primarylocked = 0;
// handle of temporary surface (if used)
static IDirectFBSurface *frame = NULL;
static int framelocked = 0;
// flipping mode flag (layer/surface)
static int flipping = 0;
// scaling flag
static int stretch = 0;
// picture position
static int xoffset=0,yoffset=0;
// picture size
static int out_width=0,out_height=0;
// frame/primary size
static int width=0,height=0;
// frame primary format
DFBSurfacePixelFormat pixel_format;
/*
static void (*draw_alpha_p)(int w, int h, unsigned char *src,
		unsigned char *srca, int stride, unsigned char *dst,
		int dstride);
*/

/******************************
* cmd line parameteres        *
******************************/

/* command line/config file options */
static int layer_id = -1;
static int buffer_mode = 1;
static int use_input = 1;
static int field_parity = -1;

/******************************
*	   implementation     *
******************************/

static void unlock(void)
{
if (frame && framelocked) frame->Unlock(frame);
if (primary && primarylocked) primary->Unlock(primary);
}

static int get_parity(strarg_t *arg) {
  if (strargcmp(arg, "top") == 0)
    return 0;
  if (strargcmp(arg, "bottom") == 0)
    return 1;
  return -1;
}

static int check_parity(void *arg) {
  return get_parity(arg) != -1;
}

static int get_mode(strarg_t *arg) {
  if (strargcmp(arg, "single") == 0)
    return 1;
  if (strargcmp(arg, "double") == 0)
    return 2;
  if (strargcmp(arg, "triple") == 0)
    return 3;
  return 0;
}

static int check_mode(void *arg) {
  return get_mode(arg) != 0;
}

static int preinit(const char *arg)
{
    DFBResult ret;
    strarg_t mode_str = {0, NULL};
    strarg_t par_str = {0, NULL};
    strarg_t dfb_params = {0, NULL};
    const opt_t subopts[] = {
      {"input",       OPT_ARG_BOOL, &use_input,  NULL},
      {"buffermode",  OPT_ARG_STR,  &mode_str,   check_mode},
      {"fieldparity", OPT_ARG_STR,  &par_str,    check_parity},
      {"layer",       OPT_ARG_INT,  &layer_id,   NULL},
      {"dfbopts",     OPT_ARG_STR,  &dfb_params, NULL},
      {NULL}
    };

    //mp_msg(MSGT_VO, MSGL_INFO,"DirectFB: Preinit entered\n");

    if (dfb) return 0; // we are already initialized!

    // set defaults
    buffer_mode = 1 + vo_doublebuffering; // honor -double switch
    layer_id = -1;
    use_input = 1;
    field_parity = -1;
     if (subopt_parse(arg, subopts) != 0) {
               mp_msg( MSGT_VO, MSGL_ERR,
                       "\n-vo directfb command line help:\n"
                       "Example: mplayer -vo directfb:layer=1:buffermode=single\n"
                       "\nOptions (use 'no' prefix to disable):\n"
                       "  input  Use DirectFB for keyboard input\n"
                       "\nOther options:\n"
                       "  layer=n\n"
                       "    n=0..xx   Use layer with id n for output (0=primary)\n"
                       "  buffermode=(single|double|triple)\n"
                       "    single   Use single buffering\n"
                       "    double   Use double buffering\n"
                       "    triple   Use triple buffering\n"
                       "  fieldparity=(top|bottom)\n"
                       "    top      Top field first\n"
                       "    bottom   Bottom field first\n"
		       "  dfbopts=<str>\n"
		       "    Specify a parameter list for DirectFB\n"
                       "\n" );
               return -1;
     }
    if (mode_str.len)
      buffer_mode = get_mode(&mode_str);
    if (par_str.len)
      field_parity = get_parity(&par_str);


	if (dfb_params.len > 0)
	{
	    int argc = 2;
	    char arg0[10] = "mplayer";
	    char *arg1 = malloc(dfb_params.len + 7);
	    char* argv[3];
	    char ** a;

	    a = &argv[0];

	    strcpy(arg1, "--dfb:");
	    strncat(arg1, dfb_params.str, dfb_params.len);

	    argv[0]=arg0;
	    argv[1]=arg1;
	    argv[2]=NULL;

    	    DFBCHECK (DirectFBInit (&argc,&a));

	    free(arg1);
	} else {

        DFBCHECK (DirectFBInit (NULL,NULL));
	}

	if (((directfb_major_version <= 0) &&
	    (directfb_minor_version <= 9) &&
	    (directfb_micro_version < 15)))
	{
	    mp_msg(MSGT_VO, MSGL_ERR,"DirectFB: Unsupported DirectFB version\n");
	    return 1;
	}

  /*
   * (set options)
   */

//	uncomment this if you do not wish to create a new VT for DirectFB
//        DFBCHECK (DirectFBSetOption ("no-vt-switch",""));

//	uncomment this if you want to allow VT switching
//       DFBCHECK (DirectFBSetOption ("vt-switching",""));

//	uncomment this if you want to hide gfx cursor (req dfb >=0.9.9)
        DFBCHECK (DirectFBSetOption ("no-cursor",""));

// bg color fix
        DFBCHECK (DirectFBSetOption ("bg-color","00000000"));

  /*
   * (Initialize)
   */

        DFBCHECK (DirectFBCreate (&dfb));

  /*
   * (Get keyboard)
   */

  if (use_input) {
    ret = dfb->GetInputDevice (dfb, DIDID_KEYBOARD, &keyboard);
    if (ret==DFB_OK) {
	mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Keyboard init OK\n");
    } else {
	keyboard = NULL;
	mp_msg(MSGT_VO, MSGL_ERR,"DirectFB: Keyboard init FAILED\n");
    }
  }


  /*
   * Create an input buffer for the keyboard.
   */
  if (keyboard) DFBCHECK (keyboard->CreateEventBuffer (keyboard, &buffer));

  // just to start clean ...
  if (buffer) buffer->Reset(buffer);

  //mp_msg(MSGT_VO, MSGL_INFO,"DirectFB: Preinit OK\n");

  return 0;

}

static DFBSurfacePixelFormat convformat(uint32_t format)
{
// add more formats !!!
	switch (format) {
            case IMGFMT_RGB32: return  DSPF_RGB32; break;
	    case IMGFMT_BGR32: return  DSPF_RGB32; break;
    	    case IMGFMT_RGB24: return  DSPF_RGB24; break;
	    case IMGFMT_BGR24: return  DSPF_RGB24; break;
            case IMGFMT_RGB16: return  DSPF_RGB16; break;
            case IMGFMT_BGR16: return  DSPF_RGB16; break;
            case IMGFMT_RGB15: return  DSPF_ARGB1555; break;
            case IMGFMT_BGR15: return  DSPF_ARGB1555; break;
            case IMGFMT_RGB12: return  DSPF_ARGB4444; break;
            case IMGFMT_BGR12: return  DSPF_ARGB4444; break;
            case IMGFMT_YUY2:  return  DSPF_YUY2; break;
            case IMGFMT_UYVY:  return  DSPF_UYVY; break;
    	    case IMGFMT_YV12:  return  DSPF_YV12; break;
    	    case IMGFMT_I420:  return  DSPF_I420; break;
//    	    case IMGFMT_IYUV:  return  DSPF_IYUV; break;
    	    case IMGFMT_RGB8:  return  DSPF_RGB332; break;
    	    case IMGFMT_BGR8:  return  DSPF_RGB332; break;

	    default: return 0;
	}
return 0;
}

typedef struct enum1_s {
uint32_t format;
int scale;
int result;
unsigned int id;
unsigned int width;
unsigned int height;
int setsize;
} enum1_t;

static DFBEnumerationResult test_format_callback(unsigned int id,
                                                 DFBDisplayLayerDescription  desc,
                                                 void *data)
{
     enum1_t *params =(enum1_t *)data;
     IDirectFBDisplayLayer *layer;
     DFBResult ret;

     if ((layer_id == -1 )||(layer_id == id)) {

     ret = dfb->GetDisplayLayer( dfb, id, &layer);
     if (ret) {
               DirectFBError( "dfb->GetDisplayLayer failed", ret );
	       return DFENUM_OK;
     } else {
        DFBDisplayLayerConfig        dlc;

	if (params->setsize) {
    	    dlc.flags	= DLCONF_WIDTH |DLCONF_HEIGHT;
	    dlc.width	= params->width;
	    dlc.height	= params->height;
	    layer->SetConfiguration(layer,&dlc);
	}


        dlc.flags       = DLCONF_PIXELFORMAT;
	dlc.pixelformat = convformat(params->format);

	layer->SetOpacity(layer,0);

	ret = layer->TestConfiguration(layer,&dlc,NULL);

        layer->Release(layer);

	mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Test format - layer %i scale/pos %i\n",id,(desc.caps & DLCAPS_SCREEN_LOCATION));

	if (ret==DFB_OK) {
//	    printf("Test OK\n");
	    if (params->result) {
	        if  ((!params->scale) && (desc.caps & DLCAPS_SCREEN_LOCATION)) {
		    params->scale=1;
		    params->id=id;
		    mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Test format - added layer %i scale/pos %i\n",id,(desc.caps & DLCAPS_SCREEN_LOCATION));
		}
	    } else {
		params->result=1;
		params->id=id;
		if (desc.caps & DLCAPS_SCREEN_LOCATION) params->scale=1;
		mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Test format - added layer %i scale/pos %i\n",id,(desc.caps & DLCAPS_SCREEN_LOCATION));
	   };
	};
     };

    };

    return DFENUM_OK;
}

static int query_format(uint32_t format)
{
	int ret = VFCAP_CSP_SUPPORTED|VFCAP_CSP_SUPPORTED_BY_HW|VFCAP_OSD; // osd should be removed the in future -> will be handled outside...
	enum1_t params;


	if (!convformat(format)) return 0;
// temporarily disable YV12
//	if (format == IMGFMT_YV12) return 0;
//	if (format == IMGFMT_I420) return 0;
	if (format == IMGFMT_IYUV) return 0;

	mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Format query: %s\n",vo_format_name(format));

	params.format=format;
	params.scale=0;
	params.result=0;
	params.setsize=0;

        DFBCHECK (dfb->EnumDisplayLayers(dfb,test_format_callback,&params));

	if (params.result) {
	    if (params.scale) ret |=VFCAP_HWSCALE_UP|VFCAP_HWSCALE_DOWN;
	    return ret;
	}

	return 0;
}

typedef struct videomode_s {
int width;
int height;
int out_width;
int out_height;
int overx;
int overy;
int bpp;
} videomode_t;


static DFBEnumerationResult video_modes_callback(int width, int height,
                                                 int bpp, void *data)
{
     videomode_t *params =(videomode_t *)data;

int overx=0,overy=0,closer=0,over=0;
int we_are_under=0;

//mp_msg(MSGT_VO, MSGL_INFO,"DirectFB: Validator entered %i %i %i\n",width,height,bpp);

overx=width-params->out_width;
overy=height-params->out_height;

if (!params->width) {
        params->width=width;
        params->height=height;
	params->overx=overx;
	params->overy=overy;
	mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Mode added %i %i %i\n",width,height,bpp);
}

if ((params->overy<0)||(params->overx<0)) we_are_under=1; // stored mode is smaller than req mode
if (abs(overx*overy)<abs(params->overx * params->overy)) closer=1; // current mode is closer to desired res
if ((overx>=0)&&(overy>=0)) over=1; // current mode is bigger or equaul to desired res
if ((closer && (over || we_are_under)) || (we_are_under && over)) {
                params->width=width;
                params->height=height;
                params->overx=overx;
                params->overy=overy;
		mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Better mode added %i %i %i\n",width,height,bpp);
                };

return DFENUM_OK;
}

#define CONFIG_ERROR -1

static int config(uint32_t s_width, uint32_t s_height, uint32_t d_width,
		uint32_t d_height, uint32_t flags, char *title,
		uint32_t format)
{
  /*
   * (Locals)
   */

// decode flags

	int fs = flags & VOFLAG_FULLSCREEN;
        int vm = flags & VOFLAG_MODESWITCHING;

	DFBSurfaceDescription dsc;
        DFBResult             ret;
        DFBDisplayLayerConfig dlc;
	DFBSurfaceCapabilities caps;

	enum1_t params;

	mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Config entered [%ix%i]\n",s_width,s_height);
	mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: With requested format: %s\n",vo_format_name(format));

// initial cleanup
	if (frame) {
	    frame->Release(frame);
	    frame=NULL;
	}

	if (primary) {
	    primary->Release(primary);
	    primary=NULL;
	}

	if (layer) {
	    layer->Release(layer);
	    layer=NULL;
	}


// vm things

	if (vm) {
	    videomode_t params;
	    params.out_width=d_width;
	    params.out_height=d_height;
	    params.width=0;
	    params.height=0;
	    switch (format) {
		    case IMGFMT_RGB32:
    		    case IMGFMT_BGR32:
					params.bpp=32;
					break;
        	    case IMGFMT_RGB24:
		    case IMGFMT_BGR24:
					params.bpp=24;
					break;
		    case IMGFMT_RGB16:
    		    case IMGFMT_BGR16:
            	    case IMGFMT_RGB15:
	    	    case IMGFMT_BGR15:
                    case IMGFMT_RGB12:
                    case IMGFMT_BGR12:
					params.bpp=16;
					break;
		    default:		params.bpp=0;

	    }
	    mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Config - trying to change videomode\n");
            DFBCHECK (dfb->EnumVideoModes(dfb,video_modes_callback,&params));
	    ret=dfb->SetVideoMode(dfb,params.width,params.height,params.bpp);
	    if (ret) {
		ret=dfb->SetVideoMode(dfb,params.width,params.height,24);
		    if (ret) {
			ret=dfb->SetVideoMode(dfb,params.width,params.height,32);
			    if (ret) {
				ret=dfb->SetVideoMode(dfb,params.width,params.height,16);
				    if (ret) {
					ret=dfb->SetVideoMode(dfb,params.width,params.height,8);
				    }
			    }
		    }
	    }
	} // vm end

// just to be sure clear primary layer
        ret = dfb->GetDisplayLayer( dfb, DLID_PRIMARY, &layer);
	if (ret==DFB_OK) {
	    ret = layer->GetSurface(layer,&primary);
	    if (ret==DFB_OK) {
		primary->Clear(primary,0,0,0,0xff);
		ret = primary->Flip(primary,NULL,0);
		if (ret==DFB_OK) {
		    primary->Clear(primary,0,0,0,0xff);
		}
    	    primary->Release(primary);
	    }
	primary=NULL;
        layer->Release(layer);
	}
	layer=NULL;

// find best layer

        mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Config - looking for suitable layer\n");
	params.format=format;
	params.scale=0;
	params.result=0;
	params.width=s_width;
	params.height=s_height;
	params.setsize=1;

        DFBCHECK (dfb->EnumDisplayLayers(dfb,test_format_callback,&params));

	if (!params.result) {
	    mp_msg(MSGT_VO, MSGL_ERR,"DirectFB: ConfigError - no suitable layer found\n");
	    params.id = DLID_PRIMARY;
	}

	mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Config - layer %i\n",params.id);

	// setup layer

        DFBCHECK (dfb->GetDisplayLayer( dfb, params.id, &layer));

        mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Config - switching layer to exclusive mode\n");
	ret = layer->SetCooperativeLevel (layer, DLSCL_EXCLUSIVE);

        if (DFB_OK != ret) {
	    mp_msg(MSGT_VO, MSGL_WARN,"DirectFB: Warning - cannot switch layer to exclusive mode. This could cause\nproblems. You may need to select correct pixel format manually!\n");
	    DirectFBError("MPlayer - Switch layer to exlusive mode.",ret);
	};
	if (params.scale) {
            mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Config - changing layer configuration (size)\n");
            dlc.flags       = DLCONF_WIDTH | DLCONF_HEIGHT;
	    dlc.width       = s_width;
    	    dlc.height      = s_height;

	    ret = layer->SetConfiguration(layer,&dlc);

	    if (ret) {
		mp_msg(MSGT_VO, MSGL_ERR,"DirectFB: ConfigError in layer configuration (size)\n");
		DirectFBError("MPlayer - Layer size change.",ret);
	    };
	}

        // look if we need to change the pixel format of the layer
	// and just to be sure also fetch all layer properties
	dlc.flags       = DLCONF_PIXELFORMAT | DLCONF_WIDTH | DLCONF_HEIGHT | DLCONF_OPTIONS | DLCONF_BUFFERMODE;

	ret = layer->GetConfiguration(layer,&dlc);

	dlc.flags       = DLCONF_PIXELFORMAT | DLCONF_WIDTH | DLCONF_HEIGHT;

	if (ret) {
	    mp_msg(MSGT_VO, MSGL_WARN,"DirectFB: Warning - could not get layer properties!\n");
	} else {
	    mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Layer reports format:%x\n",dlc.pixelformat);
	}

	if ((dlc.pixelformat != convformat(params.format)) || (ret != DFB_OK)) {

    	    dlc.flags       = DLCONF_PIXELFORMAT;
	    dlc.pixelformat = convformat(params.format);

	    mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Desired pixelformat: %x\n",dlc.pixelformat);

    	    mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Config - changing layer configuration (format)\n");
	    ret = layer->SetConfiguration(layer,&dlc);

	    if (ret) {
		unsigned int bpp;
		mp_msg(MSGT_VO, MSGL_ERR,"DirectFB: ConfigError in layer configuration (format, flags=%x)\n",dlc.flags);
		DirectFBError("MPlayer - layer pixelformat change",ret);

		// ugly fbdev workaround - try to switch pixelformat via videomode change
		switch (dlc.pixelformat) {
		    case DSPF_ARGB:
		    case DSPF_RGB32: bpp=32;break;
    		    case DSPF_RGB24: bpp=24;break;
	            case DSPF_RGB16: bpp=16;break;
    		    case DSPF_ARGB1555: bpp=15;break;
                    case DSPF_ARGB4444: bpp=12; break;
		    case DSPF_RGB332 : bpp=8;break;
		}

		switch (dlc.pixelformat) {
		    case DSPF_ARGB:
		    case DSPF_RGB32:
    		    case DSPF_RGB24:
	            case DSPF_RGB16:
    		    case DSPF_ARGB1555:
                    case DSPF_ARGB4444:
		    case DSPF_RGB332:
				    mp_msg(MSGT_VO, MSGL_V,"DirectFB: Trying to recover via videomode change (VM).\n");
				    // get size
		        	    dlc.flags = DLCONF_WIDTH | DLCONF_HEIGHT;
				    if (DFB_OK==layer->GetConfiguration(layer,&dlc)) {
					// try to set videomode
				        mp_msg(MSGT_VO, MSGL_V,"DirectFB: Videomode  %ix%i BPP %i\n",dlc.width,dlc.height,bpp);
				    	ret = dfb->SetVideoMode(dfb,dlc.width,dlc.height,bpp);
					if (ret) DirectFBError("MPlayer - VM - pixelformat change",ret);

				    };

				    //get current pixel format
				    dlc.flags       = DLCONF_PIXELFORMAT;
	    			    ret = layer->GetConfiguration(layer,&dlc);
				    if (ret) {
					DirectFBError("MPlayer - VM - Layer->GetConfiguration",ret);
					} else {
				        mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Layer now has pixelformat [%x]\n",dlc.pixelformat);
					};

				    // check if we were succesful
				    if ((dlc.pixelformat != convformat(params.format)) || (ret != DFB_OK)) {
				        mp_msg(MSGT_VO, MSGL_INFO,"DirectFB: Recovery failed!.\n");
					return CONFIG_ERROR;
					}

				    break;

		    default: return CONFIG_ERROR;

		};
	    };
	};

// flipping of layer
// try triple, double... buffering

	dlc.flags = DLCONF_BUFFERMODE;
#ifdef TRIPLE
	if (buffer_mode > 2) {
	    dlc.buffermode = DLBM_TRIPLE;
	    ret = layer->SetConfiguration( layer, &dlc );
	} else {
	    ret=!DFB_OK;
	}

	if (ret!=DFB_OK) {
#endif
	    if (buffer_mode > 1) {
		    dlc.buffermode = DLBM_BACKVIDEO;
    		    ret = layer->SetConfiguration( layer, &dlc );
    		if (ret!=DFB_OK) {
    		    dlc.buffermode = DLBM_BACKSYSTEM;
		    ret = layer->SetConfiguration( layer, &dlc );
		}
	    }
	    if (ret == DFB_OK) {
		mp_msg(MSGT_VO, MSGL_V,"DirectFB: Double buffering is active\n");
	    }
#ifdef TRIPLE
	} else {
	    mp_msg(MSGT_VO, MSGL_V,"DirectFB: Triple buffering is active\n");
	}
#endif

        if (field_parity != -1) {
	    dlc.flags = DLCONF_OPTIONS;
	    ret = layer->GetConfiguration( layer, &dlc );
	    if (ret==DFB_OK) {
               dlc.options |= DLOP_FIELD_PARITY;
	       ret = layer->SetConfiguration( layer, &dlc );
		if (ret==DFB_OK) {
            	    layer->SetFieldParity( layer, field_parity );
		}
	    }
        }
	mp_msg( MSGT_VO, MSGL_DBG2, "DirectFB: Requested field parity: ");
          switch (field_parity) {
            case -1:
                mp_msg( MSGT_VO, MSGL_DBG2, "Don't care\n");
                break;
            case 0:
                mp_msg( MSGT_VO, MSGL_DBG2, "Top field first\n");
                break;
            case 1:
                mp_msg( MSGT_VO, MSGL_DBG2, "Bottom field first\n");
                break;
          }

// get layer surface

	ret = layer->GetSurface(layer,&primary);

	if (ret) {
	    mp_msg(MSGT_VO, MSGL_ERR,"DirectFB: ConfigError - could not get surface\n");
	    return CONFIG_ERROR; // what shall we report on failure?
	}

// test surface for flipping
	DFBCHECK(primary->GetCapabilities(primary,&caps));
	primary->Clear(primary,0,0,0,0xff);
        flipping = 0;
	if (caps & (DSCAPS_FLIPPING
#ifdef TRIPLE
	| DSCAPS_TRIPLE
#endif
	)) {
	    ret = primary->Flip(primary,NULL,0);
	    if (ret==DFB_OK) {
		flipping = 1;
		primary->Clear(primary,0,0,0,0xff);
#ifdef TRIPLE
// if we have 3 buffers clean once more
	if (caps & DSCAPS_TRIPLE) {
		primary->Flip(primary,NULL,0);
		primary->Clear(primary,0,0,0,0xff);
		flipping = 2;
	}
#endif
	    }
	};

        mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Config - flipping = %i\n",flipping);

// is scale needed ? Aspect ratio and layer pos/size


	// get surface size
	DFBCHECK(primary->GetSize(primary,&width,&height));

        mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Config - surface size = %ix%i\n",width,height);

	aspect_save_orig(s_width,s_height);
	aspect_save_prescale(d_width,d_height);
	if (params.scale) {
		aspect_save_screenres(10000,10000);
		aspect(&out_width,&out_height,A_ZOOM);

                ret = layer->SetScreenLocation(layer,(1-(float)out_width/10000)/2,(1-(float)out_height/10000)/2,((float)out_width/10000),((float)out_height/10000));

		if (ret) mp_msg(MSGT_VO, MSGL_ERR,"DirectFB: ConfigError in layer configuration (position)\n");

		xoffset = 0;
		yoffset = 0;

	} else {

		aspect_save_screenres(width,height);

		if(fs) /* -fs */
			aspect(&out_width,&out_height,A_ZOOM);
		else
			aspect(&out_width,&out_height,A_NOZOOM);


    		xoffset = (width - out_width) / 2;
	        yoffset = (height - out_height) / 2;
	}

	if (((s_width==out_width)&&(s_height==out_height)) || (params.scale)) {
	    stretch = 0;
	} else {
	    stretch = 1;
	}


// temporary buffer in case of not flipping or scaling
	if ((!flipping) || stretch) {

	    DFBCHECK (primary->GetPixelFormat (primary, &dsc.pixelformat));

	    dsc.flags = DSDESC_HEIGHT | DSDESC_PIXELFORMAT | DSDESC_WIDTH;

	    dsc.width = s_width;
	    dsc.height = s_height;

	    DFBCHECK (dfb->CreateSurface( dfb, &dsc, &frame));
	    DFBCHECK(frame->GetSize(frame,&width,&height));
	    mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Frame is active.\n");
	}

// get format for draw_alpha - should be removed soon - osd will be rendered outside vo driver
	if (frame) {
		DFBCHECK (frame->GetPixelFormat(frame,&pixel_format));
        } else {
		DFBCHECK (primary->GetPixelFormat(primary,&pixel_format));
        };

 // finally turn on layer
 layer->SetOpacity(layer,255);

 //mp_msg(MSGT_VO, MSGL_INFO,"DirectFB: Config finished [%ix%i] - [%ix%i]\n",out_width,out_height,width,height);

return 0;
}

#include "osdep/keycodes.h"

static void check_events(void)
{

if (buffer) {

      DFBInputEvent event;

//if ( mp_msg_test(MSGT_VO,MSGL_V) ) printf ("DirectFB: Check events entered\n");
     if (buffer->GetEvent(buffer, DFB_EVENT (&event)) == DFB_OK) {

     if (event.type == DIET_KEYPRESS) {
    		switch (event.key_symbol) {
                                case DIKS_ESCAPE:
					mplayer_put_key(KEY_ESC);
				break;
				case DIKS_PAGE_UP: mplayer_put_key(KEY_PAGE_UP);break;
				case DIKS_PAGE_DOWN: mplayer_put_key(KEY_PAGE_DOWN);break;
                                case DIKS_CURSOR_UP: mplayer_put_key(KEY_UP);break;
                                case DIKS_CURSOR_DOWN: mplayer_put_key(KEY_DOWN);break;
                                case DIKS_CURSOR_LEFT: mplayer_put_key(KEY_LEFT);break;
                                case DIKS_CURSOR_RIGHT: mplayer_put_key(KEY_RIGHT);break;
				case DIKS_INSERT: mplayer_put_key(KEY_INSERT);break;
				case DIKS_DELETE: mplayer_put_key(KEY_DELETE);break;
				case DIKS_HOME: mplayer_put_key(KEY_HOME);break;
				case DIKS_END: mplayer_put_key(KEY_END);break;

                default:mplayer_put_key(event.key_symbol);
                };
	};
    };
// empty buffer, because of repeating (keyboard repeat is faster than key handling
// and this causes problems during seek)
// temporary workaround should be solved in the future
    buffer->Reset(buffer);

}
//if ( mp_msg_test(MSGT_VO,MSGL_V) ) printf ("DirectFB: Check events finished\n");
}

static void flip_page(void)
{
	DFBSurfaceBlittingFlags flags=DSBLIT_NOFX;

	unlock(); // unlock frame & primary

//	if ( mp_msg_test(MSGT_VO,MSGL_V) ) printf("DirectFB: Flip page entered");

	DFBCHECK (primary->SetBlittingFlags(primary,flags));

	if (frame) {
	    if (stretch) {
        	DFBRectangle rect;
        	rect.x=xoffset;
	        rect.y=yoffset;
	        rect.w=out_width;
	        rect.h=out_height;

                DFBCHECK (primary->StretchBlit(primary,frame,NULL,&rect));

	    } else {

		DFBCHECK (primary->Blit(primary,frame,NULL,xoffset,yoffset));

	    };
	};


#ifdef TRIPLE
    switch (flipping) {
	    case 1: DFBCHECK (primary->Flip (primary, NULL, DSFLIP_WAIT));
		    break;
	    case 2: DFBCHECK (primary->Flip (primary, NULL, DSFLIP_ONSYNC));
		    break;
	    default:; // should never be reached
	}
#else
    if (flipping) {
	    DFBCHECK (primary->Flip (primary, NULL, DSFLIP_WAITFORSYNC));
	}
#endif

}



static void uninit(void)
{

  //mp_msg(MSGT_VO, MSGL_INFO,"DirectFB: Uninit entered\n");

  unlock();

  /*
   * (Release)
   */
/*
  mp_msg(MSGT_VO, MSGL_INFO,"DirectFB: Releasing buffer\n");
  if (buffer) buffer->Release (buffer);
  mp_msg(MSGT_VO, MSGL_INFO,"DirectFB: Releasing keyboard\n");
  if (keyboard) keyboard->Release (keyboard);
*/
  if (frame) {
    mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Releasing frame\n");
    frame->Release (frame);
    frame = NULL;
  };

//  switch off BES
//  if (layer) layer->SetOpacity(layer,0);

  if (layer) {
   mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Releasing layer\n");
   layer->Release(layer);
   layer = NULL;
  }

  if (primary) {
   mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: Releasing primary\n");
   primary->Release (primary);
   primary = NULL;
  }


/*  mp_msg(MSGT_VO, MSGL_INFO,"DirectFB: Releasing DirectFB library\n");

  dfb->Release (dfb);
*/
  //mp_msg(MSGT_VO, MSGL_INFO,"DirectFB: Uninit done.\n");
}


static uint32_t directfb_set_video_eq(char *data, int value) //data==name
{

	DFBColorAdjustment ca;
	float factor =  (float)0xffff / 200.0;

        DFBDisplayLayerDescription  desc;

	unlock();

if (layer) {

	layer->GetDescription(layer,&desc);

	ca.flags=DCAF_NONE;

	if (! strcmp( data,"brightness" )) {
	    if (desc.caps & DLCAPS_BRIGHTNESS) {
		ca.brightness = value * factor +0x8000;
		ca.flags |= DCAF_BRIGHTNESS;
		mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: SetVEq Brightness 0x%X %i\n",ca.brightness,value);
	    } else return VO_FALSE;
	}

	if (! strcmp( data,"contrast" )) {
	    if ((desc.caps & DLCAPS_CONTRAST)) {
	        ca.contrast = value * factor + 0x8000;
		ca.flags |= DCAF_CONTRAST;
		mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: SetVEq Contrast 0x%X %i\n",ca.contrast,value);
	    } else return VO_FALSE;
	}

	if (! strcmp( data,"hue" )) {
    	    if ((desc.caps & DLCAPS_HUE)) {
		ca.hue = value * factor + 0x8000;
		ca.flags |= DCAF_HUE;
		mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: SetVEq Hue 0x%X %i\n",ca.hue,value);
	    } else return VO_FALSE;
	}

	if (! strcmp( data,"saturation" )) {
		if ((desc.caps & DLCAPS_SATURATION)) {
	        ca.saturation = value * factor + 0x8000;
		ca.flags |= DCAF_SATURATION;
		mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: SetVEq Saturation 0x%X %i\n",ca.saturation,value);
	    } else return VO_FALSE;
	}

	if (ca.flags != DCAF_NONE) {
	    layer->SetColorAdjustment(layer,&ca);
	    return VO_TRUE;
	}
}

    return VO_FALSE;

}

static uint32_t directfb_get_video_eq(char *data, int *value) // data==name
{

	DFBColorAdjustment ca;
	float factor = 200.0 / (float)0xffff;

        DFBDisplayLayerDescription desc;

if (layer) {

	unlock();

	layer->GetDescription(layer,&desc);

	layer->GetColorAdjustment(layer,&ca);

	if (! strcmp( data,"brightness" )) {
	    if (desc.caps & DLCAPS_BRIGHTNESS) {
		*value = (int) ((ca.brightness-0x8000) * factor);
		mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: GetVEq Brightness 0x%X %i\n",ca.brightness,*value);
    		return VO_TRUE;
	    } else return VO_FALSE;
	}

	if (! strcmp( data,"contrast" )) {
	    if ((desc.caps & DLCAPS_CONTRAST)) {
		*value = (int) ((ca.contrast-0x8000) * factor);
		mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: GetVEq Contrast 0x%X %i\n",ca.contrast,*value);
    		return VO_TRUE;
	    } else return VO_FALSE;
	}

	if (! strcmp( data,"hue" )) {
    	    if ((desc.caps & DLCAPS_HUE)) {
		*value = (int) ((ca.hue-0x8000) * factor);
    		mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: GetVEq Hue 0x%X %i\n",ca.hue,*value);
    		return VO_TRUE;
	    } else return VO_FALSE;
	}

	if (! strcmp( data,"saturation" )) {
    	    if ((desc.caps & DLCAPS_SATURATION)) {
		*value = (int) ((ca.saturation-0x8000) * factor);
    		mp_msg(MSGT_VO, MSGL_DBG2,"DirectFB: GetVEq Saturation 0x%X %i\n",ca.saturation,*value);
    		return VO_TRUE;
	    } else return VO_FALSE;
	}
}
    return VO_FALSE;
}

static uint32_t get_image(mp_image_t *mpi)
{

        int err;
        uint8_t *dst;
        int pitch;

//    if ( mp_msg_test(MSGT_VO,MSGL_V) ) printf("DirectFB: get_image() called\n");
    if(mpi->flags&MP_IMGFLAG_READABLE) return VO_FALSE; // slow video ram
    if(mpi->type==MP_IMGTYPE_STATIC) return VO_FALSE; // it is not static

//    printf("width=%d vs. pitch=%d, flags=0x%X  \n",mpi->width,pitch,mpi->flags);

    if(mpi->flags&(MP_IMGFLAG_ACCEPT_STRIDE|MP_IMGFLAG_ACCEPT_WIDTH)){
       // we're lucky or codec accepts stride => ok, let's go!

	    if (frame) {
		err = frame->Lock(frame,DSLF_WRITE|DSLF_READ,(void *)&dst,&pitch);
		framelocked=1;
	    } else {
 		err = primary->Lock(primary,DSLF_WRITE,(void *)&dst,&pitch);
		primarylocked=1;
	    }

	    if (err) {
		mp_msg(MSGT_VO, MSGL_ERR,"DirectFB: DR lock failed!");
		return VO_FALSE;
	    };

       if(mpi->flags&MP_IMGFLAG_PLANAR){
    	   //YV12 format
	   mpi->planes[0]=dst;
	   if(mpi->flags&MP_IMGFLAG_SWAPPED){
	   mpi->planes[1]=dst + pitch*height;
	   mpi->planes[2]=mpi->planes[1] + pitch*height/4;
	   } else {
	   mpi->planes[2]=dst + pitch*height;
	   mpi->planes[1]=mpi->planes[2] + pitch*height/4;
	   }
	   mpi->width=width;
	   mpi->stride[0]=pitch;
	   mpi->stride[1]=mpi->stride[2]=pitch/2;
       } else {
    	   //YUY2 and RGB formats
           mpi->planes[0]=dst;
	   mpi->width=width;
	   mpi->stride[0]=pitch;
       }

       // center image

       if (!frame) {
            if(mpi->flags&MP_IMGFLAG_PLANAR){
		mpi->planes[0]= dst + yoffset * pitch + xoffset;
		mpi->planes[1]+= ((yoffset * pitch) >> 2) + (xoffset >> 1);
		mpi->planes[2]+= ((yoffset * pitch) >> 2) + (xoffset >> 1);
	    } else {
		mpi->planes[0]=dst + yoffset * pitch + xoffset * (mpi->bpp >> 3);
	    }
       }

       mpi->flags|=MP_IMGFLAG_DIRECT;
//       if ( mp_msg_test(MSGT_VO,MSGL_V) ) printf("DirectFB: get_image() SUCCESS -> Direct Rendering ENABLED\n");
       return VO_TRUE;

    }
    return VO_FALSE;
}

static int draw_slice(uint8_t *src[], int stride[], int w, int h, int x, int y)
{
        int i;
	unsigned int pitch;
        uint8_t *dst;
        uint8_t *dst2;
        uint8_t *srcp;
	unsigned int p;

//        if ( mp_msg_test(MSGT_VO,MSGL_V) ) printf("DirectFB: draw_slice entered\n");

	unlock();

	if (frame) {
		DFBCHECK (frame->Lock(frame,DSLF_WRITE|DSLF_READ,(void *)&dst,&pitch));
		framelocked = 1;
        } else {
		DFBCHECK (primary->Lock(primary,DSLF_WRITE,(void *)&dst,&pitch));
		primarylocked = 1;
        };

	p = FFMIN(w, pitch);

	dst += y*pitch + x;
	dst2 = dst + pitch*height - y*pitch + y*pitch/4 - x/2;
	srcp = src[0];

	for (i=0;i<h;i++) {
            fast_memcpy(dst,srcp,p);
	    dst += pitch;
	    srcp += stride[0];
        }

	if (pixel_format == DSPF_YV12) {

            dst = dst2;
	    srcp = src[2];
    	    p = p/2;

            for (i=0;i<h/2;i++) {
                fast_memcpy(dst,srcp,p);
		dst += pitch/2;
	        srcp += stride[2];
    	    }

    	    dst = dst2 + pitch*height/4;
	    srcp = src[1];

    	    for (i=0;i<h/2;i++) {
                fast_memcpy(dst,srcp,p);
		dst += pitch/2;
	        srcp += stride[1];
    	    }

	} else {

            dst = dst2;
	    srcp = src[1];
	    p = p/2;

    	    for (i=0;i<h/2;i++) {
                fast_memcpy(dst,srcp,p);
		dst += pitch/2;
	        srcp += stride[1];
    	    }

    	    dst = dst2 + pitch*height/4;
	    srcp = src[2];

    	    for (i=0;i<h/2;i++) {
                fast_memcpy(dst,srcp,p);
		dst += pitch/2;
	        srcp += stride[2];
    	    }

	}

	unlock();

    return 0;
}


static uint32_t put_image(mp_image_t *mpi){


//    static IDirectFBSurface *tmp = NULL;
//    DFBSurfaceDescription dsc;
//    DFBRectangle rect;

//    if ( mp_msg_test(MSGT_VO,MSGL_V) ) printf("DirectFB: Put_image entered %i %i %i %i %i %i\n",mpi->x,mpi->y,mpi->w,mpi->h,mpi->width,mpi->height);

    unlock();

    // already out?
    if((mpi->flags&(MP_IMGFLAG_DIRECT|MP_IMGFLAG_DRAW_CALLBACK))) {
//        if ( mp_msg_test(MSGT_VO,MSGL_V) ) printf("DirectFB: Put_image - nothing to do\n");
	return VO_TRUE;
    }

    if (mpi->flags&MP_IMGFLAG_PLANAR) {
    // memcpy all planes - sad but necessary
        int i;
	unsigned int pitch;
        uint8_t *dst;
	uint8_t *src;
	unsigned int p;

//        if ( mp_msg_test(MSGT_VO,MSGL_V) ) printf("DirectFB: Put_image - planar branch\n");
	if (frame) {
		DFBCHECK (frame->Lock(frame,DSLF_WRITE|DSLF_READ,(void *)&dst,&pitch));
		framelocked = 1;
        } else {
		DFBCHECK (primary->Lock(primary,DSLF_WRITE,(void *)&dst,&pitch));
		primarylocked = 1;
        };

	p = FFMIN(mpi->w, pitch);

	src = mpi->planes[0]+mpi->y*mpi->stride[0]+mpi->x;

	for (i=0;i<mpi->h;i++) {
            fast_memcpy(dst+i*pitch,src+i*mpi->stride[0],p);
        }


	if (pixel_format == DSPF_YV12) {

            dst += pitch*height;
    	    p = p/2;
	    src = mpi->planes[2]+mpi->y*mpi->stride[2]+mpi->x/2;

            for (i=0;i<mpi->h/2;i++) {
	        fast_memcpy(dst+i*pitch/2,src+i*mpi->stride[2],p);
    	    }

    	    dst += pitch*height/4;
	    src = mpi->planes[1]+mpi->y*mpi->stride[1]+mpi->x/2;

    	    for (i=0;i<mpi->h/2;i++) {
        	fast_memcpy(dst+i*pitch/2,src+i*mpi->stride[1],p);
    	    }

	} else {

    	    dst += pitch*height;
	    p = p/2;
	    src = mpi->planes[1]+mpi->y*mpi->stride[1]+mpi->x/2;

    	    for (i=0;i<mpi->h/2;i++) {
        	fast_memcpy(dst+i*pitch/2,src+i*mpi->stride[1],p);
    	    }

    	    dst += pitch*height/4;
	    src = mpi->planes[2]+mpi->y*mpi->stride[2]+mpi->x/2;

    	    for (i=0;i<mpi->h/2;i++) {
        	fast_memcpy(dst+i*pitch/2,src+i*mpi->stride[2],p);
    	    }

	}
	unlock();

    } else {
// I had to disable native directfb blit because it wasn't working under some conditions :-(

/*
	dsc.flags = DSDESC_HEIGHT | DSDESC_PIXELFORMAT | DSDESC_WIDTH | DSDESC_PREALLOCATED;
	dsc.preallocated[0].data = mpi->planes[0];
	dsc.preallocated[0].pitch = mpi->stride[0];
        dsc.width = mpi->width;
        dsc.height = mpi->height;
        dsc.pixelformat = convformat(mpi->imgfmt);

	DFBCHECK (dfb->CreateSurface( dfb, &dsc, &tmp));

        rect.x=mpi->x;
        rect.y=mpi->y;
        rect.w=mpi->w;
        rect.h=mpi->h;

	if (frame) {
		DFBCHECK (tmp->Blit(tmp,frame,&rect,0,0));
        } else {
		DFBCHECK (tmp->Blit(tmp,primary,&rect,xoffset,yoffset));
        };
        tmp->Release(tmp);
*/

	unsigned int pitch;
        uint8_t *dst;

//        if ( mp_msg_test(MSGT_VO,MSGL_V) ) printf("DirectFB: Put_image - non-planar branch\n");
	if (frame) {
		DFBCHECK (frame->Lock(frame,DSLF_WRITE,(void *)&dst,&pitch));
		framelocked = 1;
		mem2agpcpy_pic(dst,mpi->planes[0] + mpi->y * mpi->stride[0] + mpi->x * (mpi->bpp >> 3)  ,mpi->w * (mpi->bpp >> 3),mpi->h,pitch,mpi->stride[0]);
        } else {
		DFBCHECK (primary->Lock(primary,DSLF_WRITE,(void *)&dst,&pitch));
		primarylocked = 1;
		mem2agpcpy_pic(dst + yoffset * pitch + xoffset * (mpi->bpp >> 3),mpi->planes[0] + mpi->y * mpi->stride[0] + mpi->x * (mpi->bpp >> 3)  ,mpi->w * (mpi->bpp >> 3),mpi->h,pitch,mpi->stride[0]);
        };
	unlock();

    }
    return VO_TRUE;
}



static int control(uint32_t request, void *data, ...)
{
  switch (request) {
    case VOCTRL_QUERY_FORMAT:
	return query_format(*((uint32_t*)data));
    case VOCTRL_GET_IMAGE:
	return get_image(data);
    case VOCTRL_DRAW_IMAGE:
	return put_image(data);
    case VOCTRL_SET_EQUALIZER:
      {
        va_list ap;
	int value;

        va_start(ap, data);
	value = va_arg(ap, int);
        va_end(ap);

	return directfb_set_video_eq(data, value);
      }
    case VOCTRL_GET_EQUALIZER:
      {
	va_list ap;
        int *value;

        va_start(ap, data);
        value = va_arg(ap, int*);
        va_end(ap);

	return directfb_get_video_eq(data, value);
      }
  };
  return VO_NOTIMPL;
}

// unused function

static int draw_frame(uint8_t *src[])
{
	return -1;
}

// hopefully will be removed soon

static void draw_alpha(int x0, int y0, int w, int h, unsigned char *src,
		unsigned char *srca, int stride)
{
        void *dst;
        int pitch;

	unlock(); // isn't it silly I have to unlock surface and then lock it again :-)

	if (frame) {
		DFBCHECK (frame->Lock(frame,DSLF_WRITE|DSLF_READ,&dst,&pitch));
		framelocked = 1;
        } else {
		DFBCHECK (primary->Lock(primary,DSLF_WRITE,&dst,&pitch));
		primarylocked = 1;
        };

	switch(pixel_format) {
                case DSPF_RGB32:
                case DSPF_ARGB:
                        vo_draw_alpha_rgb32(w,h,src,srca,stride,((uint8_t *) dst)+pitch*y0 + 4*x0,pitch);
                        break;

                case DSPF_RGB24:
                        vo_draw_alpha_rgb24(w,h,src,srca,stride,((uint8_t *) dst)+pitch*y0 + 3*x0,pitch);
                        break;

                case DSPF_RGB16:
                        vo_draw_alpha_rgb16(w,h,src,srca,stride,((uint8_t *) dst)+pitch*y0 + 2*x0,pitch);
                        break;
                case DSPF_ARGB1555:
                        vo_draw_alpha_rgb15(w,h,src,srca,stride,((uint8_t *) dst)+pitch*y0 + 2*x0,pitch);
                        break;
                case DSPF_ARGB4444:
                    vo_draw_alpha_rgb12(w, h, src, srca, stride,
                                        ((uint8_t *) dst) + pitch * y0 + 2 * x0,
                                        pitch);
                    break;

		case DSPF_YUY2:
    			vo_draw_alpha_yuy2(w,h,src,srca,stride,((uint8_t *) dst) + pitch*y0 + 2*x0,pitch);
		break;

        	case DSPF_UYVY:
    			vo_draw_alpha_yuy2(w,h,src,srca,stride,((uint8_t *) dst) + pitch*y0 + 2*x0 + 1,pitch);
		break;

        	case DSPF_I420:
		case DSPF_YV12:
    			vo_draw_alpha_yv12(w,h,src,srca,stride,((uint8_t *) dst) + pitch*y0 + 1*x0,pitch);
		break;
		}

	    unlock();
}

static void draw_osd(void)
{
    vo_draw_text(width,height,draw_alpha);
}