annotate vidix/sysdep/pci_linux.c @ 28615:15e7abed4291

Use the same code to convert fps in float to fraction as used in mencoder, it ensures all the common frame rates work right. If this causes issues, it should be changed in the same way in mencoder.c

/*
   This file is based on:
   $XFree86: xc/programs/Xserver/hw/xfree86/etc/scanpci.c,v 3.34.2.17 1998/11/10 11:55:40 dawes Exp $
   Modified for readability by Nick Kurshev
*/
/*
 * Copyright 1995 by Robin Cutshaw <[e-mail]>
 *
 * Permission to use, copy, modify, distribute, and sell this software and its
 * documentation for any purpose is hereby granted without fee, provided that
 * the above copyright notice appear in all copies and that both that
 * copyright notice and this permission notice appear in supporting
 * documentation, and that the names of the above listed copyright holder(s)
 * not be used in advertising or publicity pertaining to distribution of
 * the software without specific, written prior permission.  The above listed
 * copyright holder(s) make(s) no representations about the suitability of this
 * software for any purpose.  It is provided "as is" without express or
 * implied warranty.
 *
 * THE ABOVE LISTED COPYRIGHT HOLDER(S) DISCLAIM(S) ALL WARRANTIES WITH REGARD
 * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
 * AND FITNESS, IN NO EVENT SHALL THE ABOVE LISTED COPYRIGHT HOLDER(S) BE
 * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
 * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER
 * IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
 * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#include <errno.h>
#ifdef __i386__
//#include <sys/perm.h> doesn't exist on libc5 systems
int iopl();
#else
#if !defined(__sparc__) && !defined(__powerpc__) && !defined(__x86_64__)
#include <sys/io.h>
#endif
#endif

#ifdef __sh__
#define iopl(x) 1
#endif

#include "config.h"

#ifdef CONFIG_DHAHELPER
#include <fcntl.h>
int dhahelper_initialized = 0;
int dhahelper_fd = 0;
#endif

#ifdef CONFIG_SVGAHELPER
#include <svgalib_helper.h>
#ifdef __linux__
#include <linux/ioctl.h>
#endif
#include <fcntl.h>
#ifndef SVGALIB_HELPER_IOC_MAGIC
/* svgalib 1.9.18+ compatibility ::atmos */
#define SVGALIB_HELPER_IOCGPCIINL SVGAHELPER_PCIINL
#endif
int svgahelper_initialized = 0;
int svgahelper_fd = 0;

static int pci_config_type(void)
{
    return 1;
}

static long pci_config_read_long(
          unsigned char bus,
          unsigned char dev,
          int func, 
          unsigned cmd)
{
    pcic_t p;
    
    p.address = cmd;
    p.pcipos = (bus << 8) | dev | (func << 5);
    
    if (ioctl(svgahelper_fd, SVGALIB_HELPER_IOCGPCIINL, &p))
	return -1;

    return p.val;
}

static int pci_get_vendor(
          unsigned char bus,
          unsigned char dev,
          int func)
{
    return pci_config_read_long(bus, dev, func, 0);
}
#endif /* CONFIG_SVGAHELPER */

static __inline__ int enable_os_io(void)
{
#ifdef CONFIG_SVGAHELPER
    svgahelper_fd = open(DEV_SVGA, O_RDWR);
    if (svgahelper_fd > 0)
    {
	svgahelper_initialized = 1;
	return 0;
    }
    svgahelper_initialized = -1;
#endif

#ifdef CONFIG_DHAHELPER
    dhahelper_fd = open("/dev/dhahelper", O_RDWR);
    if (dhahelper_fd > 0)
    {
	dhahelper_initialized = 1;
	return 0;
    }
    dhahelper_initialized = -1;
#endif

#if defined(__powerpc__) && defined(__linux__)
/* should be fixed? */
#else    
    if (iopl(3) != 0)
	return errno;
#endif    
    return 0;
}

static __inline__ int disable_os_io(void)
{
#ifdef CONFIG_SVGAHELPER
    if (svgahelper_initialized == 1)
	close(svgahelper_fd);
    else
#endif
#ifdef CONFIG_DHAHELPER
    if (dhahelper_initialized == 1)
	close(dhahelper_fd);
    else
#endif
#if defined(__powerpc__) && defined(__linux__)
/* should be fixed? */
#else    
    if (iopl(0) != 0)
	return errno;
#endif    
    return 0;
}

#if (defined(__powerpc__) || defined(__sparc__) || defined(__sparc64__) \
    || defined(__x86_64__) || defined(__sh__)) && defined(__linux__) && !defined(CONFIG_SVGAHELPER)
#define CONFIG_PCI_LINUX_PROC
#endif

#if defined(CONFIG_PCI_LINUX_PROC)
static int pci_config_type( void ) { return 1; }

/* pci operations for (powerpc) Linux 
   questions, suggestions etc: 
   [e-mail], [e-mail]*/
#include <fcntl.h>
//#include <sys/io.h>
#include <linux/pci.h>
#include "libavutil/common.h"
#include "mpbswap.h"

static int pci_get_vendor(
          unsigned char bus,
          unsigned char dev,
          int func)
{
    int retval;
    char path[100];
    int fd;
    short vendor, device;
    sprintf(path,"/proc/bus/pci/%02d/%02x.0", bus, dev);
    fd = open(path,O_RDONLY|O_SYNC);
    if (fd == -1) {
	    retval=0xFFFF;
    }
    else if (pread(fd, &vendor, 2, PCI_VENDOR_ID) == 2 &&
             pread(fd, &device, 2, PCI_DEVICE_ID) == 2) {
	    vendor = le2me_16(vendor);
	    device = le2me_16(device);
	    retval = vendor + (device<<16); /*no worries about byte order, 
	    				      all ppc are bigendian*/
    } else {
	    retval = 0xFFFF;
    }   
    if (fd > 0) {
	    close(fd);
    }
    return retval;
}

static long pci_config_read_long(
          unsigned char bus,
          unsigned char dev,
          int func, 
          unsigned cmd)
{
    long retval;
    char path[100];
    int fd;
    sprintf(path,"/proc/bus/pci/%02d/%02x.0", bus, dev);
    fd = open(path,O_RDONLY|O_SYNC);
    if (fd == -1) {
	    retval=0;
    }
    else if (pread(fd, &retval, 4, cmd) == 4) {
	    retval = le2me_32(retval);
    } else {
	    retval = 0;
    }   
    if (fd > 0) {
	    close(fd);
    }
    return retval;
}
#endif /* defined(CONFIG_PCI_LINUX_PROC) */