annotate drivers/mga_vid_test.c @ 4218:3931c41f740a

Added new syncengine thanks to a new previously undocumented feature of the em8300, this might fix playback on both slow and fast machines (more testing needed). This also requires users to get the em8300 driver from cvs until the next version is released (will probably happen this weekend) Added lots of comments, should be pretty easy to understand most of the internals now Added lots of brackets to if's for's while's etc, this is not a cosmetical thing but rather due to the fact I got some very odd bugs with else's since I didn't properly use brackets (and it's the K&R standard to have brackets everywhere) Fixed some bugs that would occur when disabling libmp1e Switched to default to the new naming scheme of device nodes, the driver will slowly switch over to this state, if it can't find devices under the new name it will try the old naming scheme I stopped opening devices in non-blocking mode, it would break the new syncengine which tries to burst data to the device (alot of times meaning it will fill the fifo pretty fast which would previously result in jerkyness on fast machines) The device now sets the initial state of the pts and speed (probably not needed, but assumption is the mother of all fuckups =) Keep the control interface open during the entire duration of the libvo device, we might need this to flush video buffers on seeking (currently not implemented, therefore seeking is broken) This is beta stuff to the driver, I will get some users to test it for me and do my best to fix seeking as soon as possible...

/*
 *
 * mga_vid_test.c
 *
 * Aaron Holtzman <[e-mail]>
 * Sept 1999
 *
 * This software has been released under the terms of the GNU Public
 * license. See http://www.gnu.org/copyleft/gpl.html for details.
 */

//#include <stddef.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <inttypes.h>
#include "mga_vid.h"

mga_vid_config_t config;
uint8_t *mga_vid_base;
uint32_t is_g400;

#define SRC_IMAGE_WIDTH 256
#define SRC_IMAGE_HEIGHT 256

uint8_t y_image[SRC_IMAGE_WIDTH * SRC_IMAGE_HEIGHT];
uint8_t cr_image[SRC_IMAGE_WIDTH * SRC_IMAGE_HEIGHT];
uint8_t cb_image[SRC_IMAGE_WIDTH * SRC_IMAGE_HEIGHT];


void
write_frame_g200(uint8_t *y,uint8_t *cr, uint8_t *cb)
{
	uint8_t *dest;
	uint32_t bespitch,h,w;

	dest = mga_vid_base;
	bespitch = (config.src_width + 31) & ~31;

	for(h=0; h < config.src_height; h++) 
	{
		memcpy(dest, y, config.src_width);
		y += config.src_width;
		dest += bespitch;
	}

	for(h=0; h < config.src_height/2; h++) 
	{
		for(w=0; w < config.src_width/2; w++) 
		{
			*dest++ = *cb++;
			*dest++ = *cr++;
		}
		dest += bespitch - config.src_width;
	}
}

void
write_frame_g400(uint8_t *y,uint8_t *cr, uint8_t *cb)
{
	uint8_t *dest;
	uint32_t bespitch,h;

	dest = mga_vid_base;
	bespitch = (config.src_width + 31) & ~31;

	for(h=0; h < config.src_height; h++) 
	{
		memcpy(dest, y, config.src_width);
		y += config.src_width;
		dest += bespitch;
	}

	for(h=0; h < config.src_height/2; h++) 
	{
		memcpy(dest, cb, config.src_width/2);
		cb += config.src_width/2;
		dest += bespitch/2;
	}

	for(h=0; h < config.src_height/2; h++) 
	{
		memcpy(dest, cr, config.src_width/2);
		cr += config.src_width/2;
		dest += bespitch/2;
	}
}

void write_frame(uint8_t *y,uint8_t *cr, uint8_t *cb)
{
	if(is_g400)
		write_frame_g400(y,cr,cb);
	else
		write_frame_g200(y,cr,cb);
}

void
draw_cool_pattern(void)
{
	int i,x,y;

	i = 0;
	for (y=0; y<config.src_height; y++) {
		for (x=0; x<config.src_width; x++) {
			y_image[i++] = x*x/2 + y*y/2 - 128;
		}
	}

	i = 0;
	for (y=0; y<config.src_height/2; y++) 
		for (x=0; x<config.src_width/2; x++) 
		{
				cr_image[i++] = x - 128;
		}

	i = 0;
	for (y=0; y<config.src_height/2; y++) 
		for (x=0; x<config.src_width/2; x++) 
		{
				cb_image[i++] = y - 128;
		}
}

void
draw_color_blend(void)
{
	int i,x,y;

	i = 0;
	for (y=0; y<config.src_height; y++) {
		for (x=0; x<config.src_width; x++) {
			y_image[i++] = 0;
		}
	}

	i = 0;
	for (y=0; y<config.src_height/2; y++) 
		for (x=0; x<config.src_width/2; x++) 
		{
				cr_image[i++] = x - 128;
		}

	i = 0;
	for (y=0; y<config.src_height/2; y++) 
		for (x=0; x<config.src_width/2; x++) 
		{
				cb_image[i++] = y - 128;
		}
}


int 
main(int argc, char *argv[])
{
	int f;

	f = open("/dev/mga_vid",O_RDWR);

	if(f == -1)
	{
		fprintf(stderr,"Couldn't open driver\n");
		exit(1);
	}

	config.version = MGA_VID_VERSION;
	config.src_width = SRC_IMAGE_WIDTH;
	config.src_height= SRC_IMAGE_HEIGHT;
	config.dest_width = SRC_IMAGE_WIDTH;
	config.dest_height = SRC_IMAGE_HEIGHT;
	config.x_org= 10;
	config.y_org= 10;
	config.colkey_on = 0;
        config.format = MGA_VID_FORMAT_YV12;
	config.frame_size=SRC_IMAGE_WIDTH*SRC_IMAGE_HEIGHT*2;
	config.num_frames=1;

	if (ioctl(f,MGA_VID_CONFIG,&config))
	{
		perror("Error in config ioctl");
	}

	if (config.card_type == MGA_G200) 
	{
		printf("Testing MGA G200 Backend Scaler with %d MB of RAM\n", config.ram_size);
	  is_g400 = 0;
	}
	else
	{
		printf("Testing MGA G400 Backend Scaler with %d MB of RAM\n", config.ram_size);
	  is_g400 = 1;
	}
	
	ioctl(f,MGA_VID_ON,0);
	mga_vid_base = (uint8_t*)mmap(0,256 * 4096,PROT_WRITE,MAP_SHARED,f,0);
	printf("mga_vid_base = %8p\n",mga_vid_base);


	//memset(y_image,80,256 * 128);
	//memset(cr_image,80,256/2 * 20);
	//memset(cb_image,80,256/2 * 20);
	write_frame(y_image,cr_image,cb_image);
	printf("(1) There should be a green square, offset by 10 pixels from\n"
			   "    the upper left corner displayed\n");
	sleep(3);


	draw_cool_pattern();
	write_frame(y_image,cr_image,cb_image);
	printf("(2) There should be a cool mosaic like pattern now.\n");
	sleep(3);

	draw_color_blend();
	write_frame(y_image,cr_image,cb_image);
	printf("(3) There should be a color blend with black, red, purple, blue\n"
			   "    corners (starting top left going CW)\n");
	sleep(3);

	ioctl(f,MGA_VID_OFF,0);

	close(f);
	return 0;
}