annotate libaf/af_bs2b.c @ 33263:5f527a9a9521

Add an exit function. This function will allow performing clean-up operations. (MPlayer calls guiDone() before exiting, but only if the GUI has been initialized, i.e. if guiInit() has been called successfully. Any exit_player()/exit_player_with_rc() after GUI's cfg_read() until guiInit(), or any exit_player() during guiInit() itself will end the GUI without calling guiDone(). This exit function will at least handle abortions during guiInit() itself. It will be called twice in case of an guiExit() after GUI initialization - first directly, next by guiDone() via MPlayer's exit_player_with_rc().)

/*
 * The Bauer stereophonic-to-binaural DSP using bs2b library:
 * http://bs2b.sourceforge.net/
 *
 * Copyright (c) 2009 Andrew Savchenko
 *
 * This file is part of MPlayer.
 *
 * MPlayer is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * MPlayer is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with MPlayer; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#include <bs2b.h>
#include <inttypes.h>
#include <stdlib.h>
#include <string.h>

#include "af.h"
#include "subopt-helper.h"

/// Internal specific data of the filter
struct af_bs2b {
    int fcut;           ///< cut frequency in Hz
    int feed;           ///< feed level for low frequencies in 0.1*dB
    char *profile;      ///< profile (available crossfeed presets)
    t_bs2bdp filter;    ///< instance of a library filter
};

#define PLAY(name, type) \
static af_data_t *play_##name(struct af_instance_s *af, af_data_t *data) \
{ \
    /* filter is called for all pairs of samples available in the buffer */ \
    bs2b_cross_feed_##name(((struct af_bs2b*)(af->setup))->filter, \
        (type*)(data->audio), data->len/data->bps/2); \
\
    return data; \
}

PLAY(f, float)
PLAY(fbe, float)
PLAY(fle, float)
PLAY(s32be, int32_t)
PLAY(u32be, uint32_t)
PLAY(s32le, int32_t)
PLAY(u32le, uint32_t)
PLAY(s24be, bs2b_int24_t)
PLAY(u24be, bs2b_uint24_t)
PLAY(s24le, bs2b_int24_t)
PLAY(u24le, bs2b_uint24_t)
PLAY(s16be, int16_t)
PLAY(u16be, uint16_t)
PLAY(s16le, int16_t)
PLAY(u16le, uint16_t)
PLAY(s8, int8_t)
PLAY(u8, uint8_t)

/// Sanity check for fcut value
static int test_fcut(void *par)
{
    const int val = *(int*)par;
    if (val >= BS2B_MINFCUT && val <= BS2B_MAXFCUT)
        return 1;

    mp_msg(MSGT_AFILTER, MSGL_ERR,
           "[bs2b] Cut frequency must be in range [%d..%d], but current value is %d.\n",
           BS2B_MINFCUT, BS2B_MAXFCUT, val);
    return 0;
}

/// Sanity check for feed value
static int test_feed(void *par)
{
    const int val = *(int*)par;
    if (val >= BS2B_MINFEED && val <= BS2B_MAXFEED)
        return 1;

    mp_msg(MSGT_AFILTER, MSGL_ERR,
           "[bs2b] Feed level must be in range [%d..%d], but current value is %d.\n",
           BS2B_MINFEED, BS2B_MAXFEED, val);
    return 0;
}

/// Initialization and runtime control
static int control(struct af_instance_s *af, int cmd, void *arg)
{
    struct af_bs2b *s = af->setup;

    switch (cmd) {
    case AF_CONTROL_REINIT: {
        int format;
        char buf[256];
        // Sanity check
        if (!arg) return AF_ERROR;

        format           = ((af_data_t*)arg)->format;
        af->data->rate   = ((af_data_t*)arg)->rate;
        af->data->nch    = 2;     // bs2b is useful only for 2ch audio
        af->data->bps    = ((af_data_t*)arg)->bps;
        af->data->format = format;

        /* check for formats supported by libbs2b
           and assign corresponding handlers */
        switch (format) {
            case AF_FORMAT_FLOAT_BE:
                af->play = play_fbe;
                break;
            case AF_FORMAT_FLOAT_LE:
                af->play = play_fle;
                break;
            case AF_FORMAT_S32_BE:
                af->play = play_s32be;
                break;
            case AF_FORMAT_U32_BE:
                af->play = play_u32be;
                break;
            case AF_FORMAT_S32_LE:
                af->play = play_s32le;
                break;
            case AF_FORMAT_U32_LE:
                af->play = play_u32le;
                break;
            case AF_FORMAT_S24_BE:
                af->play = play_s24be;
                break;
            case AF_FORMAT_U24_BE:
                af->play = play_u24be;
                break;
            case AF_FORMAT_S24_LE:
                af->play = play_s24le;
                break;
            case AF_FORMAT_U24_LE:
                af->play = play_u24le;
                break;
            case AF_FORMAT_S16_BE:
                af->play = play_s16be;
                break;
            case AF_FORMAT_U16_BE:
                af->play = play_u16be;
                break;
            case AF_FORMAT_S16_LE:
                af->play = play_s16le;
                break;
            case AF_FORMAT_U16_LE:
                af->play = play_u16le;
                break;
            case AF_FORMAT_S8:
                af->play = play_s8;
                break;
            case AF_FORMAT_U8:
                af->play = play_u8;
                break;
            default:
                af->play = play_f;
                af->data->format = AF_FORMAT_FLOAT_NE;
                af->data->bps = 4;
                break;
        }

        // bs2b have srate limits, try to resample if needed
        if (af->data->rate > BS2B_MAXSRATE || af->data->rate < BS2B_MINSRATE) {
            af->data->rate = BS2B_DEFAULT_SRATE;
            mp_msg(MSGT_AFILTER, MSGL_WARN,
                   "[bs2b] Requested sample rate %d Hz is out of bounds [%d..%d] Hz.\n"
                   "[bs2b] Trying to resample to %d Hz.\n",
                   af->data->rate, BS2B_MINSRATE, BS2B_MAXSRATE, BS2B_DEFAULT_SRATE);
        }
        bs2b_set_srate(s->filter, (long)af->data->rate);
        mp_msg(MSGT_AFILTER, MSGL_V, "[bs2b] using format %s\n",
               af_fmt2str(af->data->format,buf,256));

        return af_test_output(af,(af_data_t*)arg);
    }
    case AF_CONTROL_COMMAND_LINE: {
        const opt_t subopts[] = {
            {"fcut",    OPT_ARG_INT,   &s->fcut,    test_fcut},
            {"feed",    OPT_ARG_INT,   &s->feed,    test_feed},
            {"profile", OPT_ARG_MSTRZ, &s->profile, NULL},
            {NULL}
        };
        if (subopt_parse(arg, subopts) != 0) {
            mp_msg(MSGT_AFILTER, MSGL_ERR, "[bs2b] Invalid option specified.\n");
            free(s->profile);
            return AF_ERROR;
        }
        // parse profile if specified
        if (s->profile) {
            if (!strcmp(s->profile, "default"))
                bs2b_set_level(s->filter, BS2B_DEFAULT_CLEVEL);
            else if (!strcmp(s->profile, "cmoy"))
                bs2b_set_level(s->filter, BS2B_CMOY_CLEVEL);
            else if (!strcmp(s->profile, "jmeier"))
                bs2b_set_level(s->filter, BS2B_JMEIER_CLEVEL);
            else {
                mp_msg(MSGT_AFILTER, MSGL_ERR,
                       "[bs2b] Invalid profile specified: %s.\n"
                       "[bs2b] Available profiles are: default, cmoy, jmeier.\n",
                       s->profile);
                free(s->profile);
                return AF_ERROR;
            }
        }
        // set fcut and feed only if specified, otherwise defaults will be used
        if (s->fcut)
            bs2b_set_level_fcut(s->filter, s->fcut);
        if (s->feed)
            bs2b_set_level_feed(s->filter, s->feed);

        mp_msg(MSGT_AFILTER, MSGL_V,
               "[bs2b] using cut frequency %d, LF feed level %d\n",
               bs2b_get_level_fcut(s->filter), bs2b_get_level_feed(s->filter));
        free(s->profile);
        return AF_OK;
    }
    }
    return AF_UNKNOWN;
}

/// Deallocate memory and close library
static void uninit(struct af_instance_s *af)
{
    struct af_bs2b *s = af->setup;
    free(af->data);
    if (s && s->filter)
        bs2b_close(s->filter);
    free(s);
}

/// Allocate memory, set function pointers and init library
static int af_open(af_instance_t *af)
{
    struct af_bs2b *s;
    af->control = control;
    af->uninit  = uninit;
    af->mul     = 1;
    if (!(af->data = calloc(1, sizeof(af_data_t))))
        return AF_ERROR;
    if (!(af->setup = s = calloc(1, sizeof(struct af_bs2b)))) {
        free(af->data);
        return AF_ERROR;
    }

    // NULL means failed initialization
    if (!(s->filter = bs2b_open())) {
        free(af->data);
        free(af->setup);
        return AF_ERROR;
    }
    // Set zero defaults indicating no option was specified.
    s->profile = NULL;
    s->fcut    = 0;
    s->feed    = 0;
    return AF_OK;
}

/// Description of this filter
af_info_t af_info_bs2b = {
    "Bauer stereophonic-to-binaural audio filter",
    "bs2b",
    "Andrew Savchenko",
    "",
    AF_FLAGS_REENTRANT,
    af_open
};