Mercurial > mplayer.hg
annotate DOCS/video.html @ 2767:812e60e913a2
fixes suggested by atmos
| author | arpi |
|---|---|
| date | Thu, 08 Nov 2001 13:37:32 +0000 |
| parents | d94e94466dde |
| children | 33c32f3d9f1f |
| rev | line source |
|---|---|
| 1612 | 1 <HTML> |
| 1704 | 2 <BODY BGCOLOR=white> |
| 3 | |
| 4 <FONT face="Verdana, Arial, Helvetica, sans-serif" size=2> | |
| 1612 | 5 |
| 2745 | 6 <P><B><A NAME=2.3.1>2.3.1. Video output devices</A></B></P> |
| 1612 | 7 |
| 1682 | 8 <TABLE BORDER=0> |
| 9 | |
| 1987 | 10 <TD COLSPAN=4><P><B><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>General:</B></P></TD><TR> |
| 1612 | 11 |
| 1987 | 12 <TD> </TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>x11</TD><TD> </TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>X11 with optional SHM extension</TD><TR> |
| 13 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>xv</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>X11 using overlays with the Xvideo extension (hardware YUV & scaling)</TD><TR> | |
| 14 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>gl</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>OpenGL renderer, so far works only with: | |
| 1682 | 15 <UL><LI>all cards with Utah-GLX |
| 16 <LI>Matrox cards with X/DRI >=4.0.3 | |
| 17 <LI>Radeon with X/DRI CVS</UL></TD><TR> | |
| 1987 | 18 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>dga</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>X11 DGA extension</TD><TR> |
| 19 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>fbdev</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>Output to general framebuffers</TD><TR> | |
| 20 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>svga</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>Output to SVGAlib</TD><TR> | |
| 21 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>sdl</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2> | |
| 1682 | 22 <CODE>1.1.7:</CODE> supports software scaling<BR> |
| 23 <CODE>1.1.8:</CODE> supports Xvideo (hardware scaling/fullscreen)<BR> | |
| 24 <CODE>1.2.0:</CODE> supports AAlib (-vo aa is very recommended, see below!)</TD><TR> | |
| 1987 | 25 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>ggi</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>similar to SDL</TD><TR> |
| 26 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>aa</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>textmode rendering with AAlib</TD><TR> | |
| 2745 | 27 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2><a href="video.html#2.3.1.12">vesa</a></TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>Output to VESA BIOS.</TD><TR> |
| 1682 | 28 |
| 1987 | 29 <TD COLSPAN=4><P><B><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>Card specific:</B></P></TD><TR> |
| 1612 | 30 |
| 1987 | 31 <TD> </TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>mga</TD><TD> </TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>Matrox G200/G400 hardware YUV overlay via the mga_vid device</TD><TR> |
| 32 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>xmga</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>Matrox G200/G400 overlay (mga_vid) in X11 window<BR> | |
| 1682 | 33 (<I>Xv emulation on X 3.3.x!</I>)</TD><TR> |
| 1987 | 34 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>syncfb</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>Matrox G400 YUV support on framebuffer (obsoleted, use mga/xmga)</TD><TR> |
| 2131 | 35 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>3dfx</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>Voodoo3/Banshee hardware YUV (/dev/3dfx) support (not yet tested, maybe |
| 1682 | 36 broken)</TD><TR> |
| 2131 | 37 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>tdfxfb</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>Voodoo3/Banshee hardware YUV support on tdfx framebuffer (works!)</TD><TR> |
| 1682 | 38 |
| 1987 | 39 <TD COLSPAN=4><P><B><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>Special:</B></P></TD><TR> |
| 1612 | 40 |
| 1987 | 41 <TD> </TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>png</TD><TD> </TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>PNG files output (use -z switch to set compression)</TD><TR> |
| 42 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>pgm</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>PGM files output (for testing purposes or ffmpeg encoding)</TD><TR> | |
| 43 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>md5</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>MD5sum output (for MPEG conformance tests)</TD><TR> | |
| 44 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>odivx</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>OpenDivX AVI File writer (use -br to set encoding bitrate) (<B>WITHOUT SOUND</B>!)</TD><TR> | |
| 45 <TD></TD><TD VALIGN=top><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>null</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>Null output (for speed tests/benchmarking)</TD><TR> | |
| 1682 | 46 </TABLE> |
| 1612 | 47 |
| 1682 | 48 <P>NOTE: <I>check the following subsections for details and requirements!</I></P> |
| 1612 | 49 |
| 50 | |
| 2745 | 51 <P><B><A NAME=2.3.1.1>2.3.1.1. Setting up MTRR</A></B></P> |
| 1612 | 52 |
| 1946 | 53 <P>It is VERY recommended to check if the MTRR registers are set up properly, |
| 54 because they can give a big performance boost.</P> | |
| 55 | |
| 56 <P>Do a '<CODE>cat /proc/mtrr</CODE>' :</P> | |
| 57 | |
| 58 <P><CODE> | |
| 59 --($:~)-- cat /proc/mtrr<BR> | |
| 60 reg00: base=0xe4000000 (3648MB), size= 16MB: write-combining, count=9<BR> | |
| 61 reg01: base=0xd8000000 (3456MB), size= 128MB: write-combining, count=1<BR> | |
| 62 </CODE></P> | |
| 63 | |
| 64 <P>It's right, shows my Matrox G400 with 16Mb memory. I did this from | |
| 65 XFree 4.x.x , which sets up MTRR registers automatically.</P> | |
| 66 | |
| 67 If nothing worked, you have to do it manually. First, you have to find the base | |
| 68 address. | |
| 1682 | 69 You have 3 ways to find it:</P> |
| 1612 | 70 |
| 1682 | 71 <P><UL> |
| 72 <LI>from X11 startup messages, for example: | |
| 73 <P><CODE>(--) SVGA: PCI: Matrox MGA G400 AGP rev 4, Memory @ 0xd8000000, 0xd4000000<BR> | |
| 74 (--) SVGA: Linear framebuffer at 0xD8000000</CODE></P> | |
| 75 <LI>from /proc/pci (use lspci -v command): | |
| 76 <P><TABLE> | |
| 77 <TD VALIGN=top><CODE>01:00.0</CODE></TD><TD><CODE>VGA compatible controller: Matrox Graphics, Inc.: Unknown device 0525</CODE></TD><TR> | |
| 78 <TD></TD><TD><CODE>Memory at d8000000 (32-bit, prefetchable)</CODE></TD><TR> | |
| 79 </TABLE></P></CODE> | |
| 80 <LI>from mga_vid kernel driver messages (use dmesg): | |
| 81 <P><CODE>mga_mem_base = d8000000</CODE></P> | |
| 82 </UL></P> | |
| 1612 | 83 |
| 1682 | 84 <P>Then let's find the memory size. This is very easy, just convert video ram |
| 85 size to hexadecimal, or use this table:</P> | |
| 1612 | 86 |
| 1682 | 87 <TABLE BORDER=0> |
| 88 <TD> </TD><TD>1 MB</TD><TD WIDTH=10%></TD><TD>0x100000</TD><TR> | |
| 89 <TD></TD><TD>2 MB</TD><TD></TD><TD>0x200000</TD><TR> | |
| 90 <TD></TD><TD>4 MB</TD><TD></TD><TD>0x400000</TD><TR> | |
| 91 <TD></TD><TD>8 MB</TD><TD></TD><TD>0x800000</TD><TR> | |
| 92 <TD></TD><TD>16 MB</TD><TD></TD><TD>0x1000000</TD><TR> | |
| 93 <TD></TD><TD>32 MB</TD><TD></TD><TD>0x2000000</TD><TR> | |
| 94 </TABLE> | |
| 1612 | 95 |
| 96 | |
| 1682 | 97 <P>You know base address and memory size, let's setup mtrr registers! |
| 98 For example, for the Matrox card above (base=0xd8000000) with 32MB | |
| 99 ram (size=0x2000000) just execute:</P> | |
| 1612 | 100 |
| 101 | |
| 1682 | 102 <P><CODE> echo "base=0xd8000000 size=0x2000000 type=write-combining" >| /proc/mtrr</CODE></P> |
| 1612 | 103 |
| 104 | |
| 1682 | 105 <P>Not all CPUs support MTRRs. For example older K6-2's [around 266Mhz, |
| 106 stepping 0] doesn't support MTRR, but stepping 12's do ('<CODE>cat /proc/cpuinfo</CODE>' | |
| 1686 | 107 to check it</CODE>').</P> |
| 1612 | 108 |
| 2745 | 109 <P><B><A NAME=2.3.1.2>2.3.1.2. Xv</A></B></P> |
| 1612 | 110 |
| 1682 | 111 <P>Under XFree86 4.0.2 or newer, you can use your card's hardware YUV routines |
| 112 using the XVideo extension. This is what the option '-vo xv' uses. | |
| 113 In order to make this work, be sure to check the following:</P> | |
| 114 <P><UL> | |
| 115 <LI>You have to use XFree86 4.0.2 or newer (former versions don't have XVideo) | |
| 116 <LI>Your card actually supports harware acceleration (modern cards do) | |
| 117 <LI>X loads the XVideo extension, it's something like this: | |
| 1612 | 118 |
| 1682 | 119 <P><CODE> (II) Loading extension XVideo</CODE></P> |
| 120 <P>in /var/log/XFree86.0.log</P> | |
| 1612 | 121 |
| 1682 | 122 <P>NOTE: this loads only the XFree86's extension. In a good install, this is |
| 123 always loaded, and doesn't mean that the _card's_ XVideo support is loaded!</P> | |
| 1612 | 124 |
| 1682 | 125 <LI>Your card has Xv support under Linux. To check, try 'xvinfo', it is the |
| 126 part of the XFree86 distribution. It should display a long text, similar | |
| 127 to this: | |
| 128 <PRE> | |
| 1612 | 129 X-Video Extension version 2.2 |
| 130 screen #0 | |
| 131 Adaptor #0: "Savage Streams Engine" | |
| 132 number of ports: 1 | |
| 133 port base: 43 | |
| 134 operations supported: PutImage | |
| 135 supported visuals: | |
| 136 depth 16, visualID 0x22 | |
| 137 depth 16, visualID 0x23 | |
| 138 number of attributes: 5 | |
| 139 (...) | |
| 140 Number of image formats: 7 | |
| 141 id: 0x32595559 (YUY2) | |
| 142 guid: 59555932-0000-0010-8000-00aa00389b71 | |
| 143 bits per pixel: 16 | |
| 144 number of planes: 1 | |
| 145 type: YUV (packed) | |
| 146 id: 0x32315659 (YV12) | |
| 147 guid: 59563132-0000-0010-8000-00aa00389b71 | |
| 148 bits per pixel: 12 | |
| 149 number of planes: 3 | |
| 150 type: YUV (planar) | |
| 151 (...etc...) | |
| 1682 | 152 </PRE> |
| 1612 | 153 |
| 1682 | 154 <P>It must support YUY2 packed, and YV12 planar pixel formats to be |
| 155 usable with <B>MPlayer</B>.</P> | |
| 1612 | 156 |
| 1682 | 157 <LI>And finally, check if <B>MPlayer</B> was compiled with 'xv' support. |
| 158 ./configure prints this. | |
| 1612 | 159 |
| 1682 | 160 </UL></P> |
| 161 | |
| 2745 | 162 <P><B><A NAME=2.3.1.2.1>2.3.1.2.1. 3dfx cards</A></B></P> |
| 1612 | 163 |
| 1682 | 164 <P>Older 3dfx drivers were known to have problems with XVideo acceleration, |
| 165 it didn't support either YUY2 or YV12, and so. Verify that you have | |
| 166 XFree86 version 4.1.0 or greater, it works ok. Alternatively, you can use | |
| 167 <A HREF="http://dri.sourceforge.net">DRI</A> cvs. | |
| 168 If you experience strange effects using -vo xv, try SDL (it has XVideo too) | |
| 2745 | 169 and see if it helps. Check the <A HREF="#2.3.1.4">SDL section</A> for details.</P> |
| 1612 | 170 |
| 2745 | 171 <P><B>OR</B>, try the NEW -vo tdfxfb driver! See the <A HREF=#2.3.1.9>2.3.1.9</A> |
| 1992 | 172 section!</P> |
| 1612 | 173 |
| 2745 | 174 <P><B><A NAME=2.3.1.2.2>2.3.1.2.2. S3 cards</A></B></P> |
| 1682 | 175 |
| 176 <P>S3 Savage3D's should work fine, but for Savage4, use XFree86 version 4.0.3 | |
| 1988 | 177 or greater (in case of image problems, try 16bpp). As for S3 Virge.. sell it.</P> |
| 1682 | 178 |
| 2745 | 179 <P><B><A NAME=2.3.1.2.3>2.3.1.2.3. nVidia cards</A></B></P> |
| 1612 | 180 |
| 1682 | 181 <P>nVidia isn't a very good choice under Linux.. You'll have to use the |
| 182 binary nVidia driver, available at nVidia's website. The standard X | |
| 183 driver doesn't support XVideo for these cards, due to nVidia's closed | |
| 184 sources/specifications.</P> | |
| 1612 | 185 |
| 1682 | 186 <P><UL><LI>Riva128 cards don't have XVideo support even with the nvidia driver :( |
| 187 Complain to NVidia.</UL></P> | |
| 1612 | 188 |
| 189 | |
| 2745 | 190 <P><B><A NAME=2.3.1.2.4>2.3.1.2.4. ATI cards</A></B></P> |
| 1612 | 191 |
| 1920 | 192 <P> |
| 2063 | 193 <LI>The GATOS driver (which you should use) has VSYNC enabled by default. It means that decoding speed |
| 1682 | 194 (!) is synced to the monitor's refresh rate. If playing seems to be slow, try |
| 1920 | 195 disabling VSYNC somehow, or set refresh rate to n*(fps of the movie) Hz.</LI> |
| 196 | |
| 197 <LI>Radeon VE - currently only XFree86 CVS has driver for this card, version | |
| 2745 | 198 4.1.0 doesn't. No TV-out support. (But see <a href="video.html#2.3.1.12">VESA</a> sections).</LI> |
| 1920 | 199 </P> |
| 1612 | 200 |
| 201 | |
| 2745 | 202 <P><B><A NAME=2.3.1.2.5>2.3.1.2.5. NeoMagic cards</A></B></P> |
|
1922
5f0e4310dd4d
NeoMagic stuff added (legyen egyszer gyereknap...)
gabucino
parents:
1920
diff
changeset
|
203 |
|
5f0e4310dd4d
NeoMagic stuff added (legyen egyszer gyereknap...)
gabucino
parents:
1920
diff
changeset
|
204 <P> |
|
5f0e4310dd4d
NeoMagic stuff added (legyen egyszer gyereknap...)
gabucino
parents:
1920
diff
changeset
|
205 These cards can be found in many laptops. Under Linux, their peak is only DGA. |
|
5f0e4310dd4d
NeoMagic stuff added (legyen egyszer gyereknap...)
gabucino
parents:
1920
diff
changeset
|
206 Unfortunately, the DGA driver in X 4.1.0 doesn't work, you'll have to wait for |
|
5f0e4310dd4d
NeoMagic stuff added (legyen egyszer gyereknap...)
gabucino
parents:
1920
diff
changeset
|
207 4.2.0, or download a modified driver for 4.0.3 or 4.1.0 from here : |
| 2614 | 208 <A HREF="http://www.mplayerhq.hu/MPlayer/contrib/NeoMagic-driver">http://www.mplayerhq.hu/MPlayer/contrib/NeoMagic-driver</A> |
|
1922
5f0e4310dd4d
NeoMagic stuff added (legyen egyszer gyereknap...)
gabucino
parents:
1920
diff
changeset
|
209 (there is also the patch to the driver's source).<BR> |
|
5f0e4310dd4d
NeoMagic stuff added (legyen egyszer gyereknap...)
gabucino
parents:
1920
diff
changeset
|
210 Drivers provided by <A HREF="mailto:tomee@cpi.pl">Tomek Jarzynka</A>. |
|
5f0e4310dd4d
NeoMagic stuff added (legyen egyszer gyereknap...)
gabucino
parents:
1920
diff
changeset
|
211 </P> |
|
5f0e4310dd4d
NeoMagic stuff added (legyen egyszer gyereknap...)
gabucino
parents:
1920
diff
changeset
|
212 |
|
5f0e4310dd4d
NeoMagic stuff added (legyen egyszer gyereknap...)
gabucino
parents:
1920
diff
changeset
|
213 |
| 2745 | 214 <P><B><A NAME=2.3.1.3>2.3.1.3. DGA</A></B></P> |
| 1612 | 215 |
| 2745 | 216 <P><B><A NAME=2.3.1.3.1>2.3.1.3.1. Summary</A></B></P> |
| 1612 | 217 |
| 1682 | 218 <P>This document tries to explain in some words what DGA is in general and |
| 219 what the DGA video output driver for mplayer can do (and what it can't).</P> | |
| 1612 | 220 |
| 221 | |
| 2745 | 222 <P><B><A NAME=2.3.1.3.2>2.3.1.3.2. What is DGA</A></B></P> |
| 1612 | 223 |
| 1682 | 224 <P>DGA is short for Direct Graphics Access and is a means for a program to |
| 225 bypass the X-Server and directly modifying the framebuffer memory. | |
| 226 Technically spoken this happens by mapping the framebuffer memory into | |
| 227 the memory range of your process. This is allowed by the kernel only | |
| 228 if you have superuser privileges. You can get these either by logging in | |
| 229 as root or by setting the suid bit on the mplayer excecutable (NOT | |
| 230 recommended!).</P> | |
| 1612 | 231 |
| 1682 | 232 <P>There are two versions of DGA: DGA1 is used by XFree 3.x.x and DGA2 was |
| 233 introduced with XFree 4.0.1.</P> | |
| 1612 | 234 |
| 1682 | 235 <P>DGA1 provides only direct framebuffer access as described above. For |
| 236 switching the resolution of the video signal you have to rely on the | |
| 237 XVidMode extension.</P> | |
| 1612 | 238 |
| 1682 | 239 <P>DGA2 incorporates the features of XVidMode extension and also allows |
| 240 switching the depth of the display. So you may, although basically | |
| 241 running a 32 bit depth XServer, switch to a depth of 15 bits and vice | |
| 242 versa. </P> | |
| 1612 | 243 |
| 1682 | 244 <P>However DGA has some drawbacks. It seems it is somewhat dependent on the |
| 245 graphics chip you use and on the implementation of the XServer's video | |
| 246 driver that controls this chip. So it does not work on every system ...</P> | |
| 1612 | 247 |
| 248 | |
| 2745 | 249 <P><B><A NAME=2.3.1.3.3>2.3.1.3.3. Installing DGA support for MPlayer</A></B></P> |
| 1682 | 250 |
| 251 <P>First make sure X loads the DGA extension, see in /var/log/XFree86.0.log:</P> | |
| 252 | |
| 253 <P> <CODE>(II) Loading extension XFree86-DGA</CODE></P> | |
| 254 | |
| 255 <P>See, XFree86 4.0.x or greater is VERY RECOMMENDED! | |
| 256 <B>MPlayer</B>'s DGA driver is autodetected on ./configure, or you can force it | |
| 257 with --enable-dga.</P> | |
| 1612 | 258 |
| 1682 | 259 <P>If the driver couldn't switch to a smaller resolution, experiment with |
| 260 switches -vm (only with X 3.3.x), -fs, -bpp, -zoom to find a video mode that | |
| 261 the movie fits in. There is no converter right now.. :(</P> | |
| 1612 | 262 |
| 1682 | 263 <P>Become ROOT. DGA needs root access to be able to write directly video memory. |
| 264 If you want to run it as user, then install <B>MPlayer</B> SUID root:</P> | |
| 1612 | 265 |
| 1682 | 266 <P><CODE> |
|
2448
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
267 chown root /usr/local/bin/mplayer<BR> |
| 1686 | 268 chmod 750 /usr/local/bin/mplayer<BR> |
| 269 chmod +s /usr/local/bin/mplayer</CODE></P> | |
| 1612 | 270 |
| 271 | |
| 1682 | 272 <P>Now it works as a simple user, too.</P> |
| 1612 | 273 |
| 274 | |
| 1682 | 275 <P><B>!!!! BUT STAY TUNED !!!!</B><BR> |
| 276 This is a <B>BIG</B> security risk! Never do this on a server or on a computer | |
| 277 can be accessed by more people than only you because they can gain root | |
| 278 privilegies through suid root mplayer.<BR> | |
| 279 <B>!!!! SO YOU HAVE BEEN WARNED ... !!!!</B></P> | |
| 280 | |
| 281 <P>Now use '-vo dga' option, and there you go! (hope so:) | |
| 282 You should also try if the '-vo sdl:dga' option works for you! It's much | |
| 283 faster!!!</P> | |
| 284 | |
| 2745 | 285 <P><B><A NAME=2.3.1.3.4>2.3.1.3.4. Resolution switching</A></B></P> |
| 1682 | 286 |
| 287 <P>The DGA driver allows for switching the resolution of the output signal. | |
| 288 This avoids the need for doing (slow) software scaling and at the same | |
| 289 time provides a fullscreen image. Ideally it would switch to the exact | |
| 290 resolution (except for honouring aspect ratio) of the video data, but the | |
| 1686 | 291 XServer only allows switching to resolutions predefined in |
| 1682 | 292 <CODE>/etc/X11/XF86Config</CODE> (<CODE>/etc/X11/XF86Config-4</CODE> for XFree 4.0.X respectively). |
| 293 Those are defined by so-called modelines and depend on the capabilites | |
| 294 of your video hardware. The XServer scans this config file on startup and | |
| 295 disables the modelines not suitable for your hardware. You can find | |
| 296 out which modes survive with the X11 log file. It can be found at: | |
| 297 <CODE>/var/log/XFree86.0.log</CODE>.</P> | |
| 298 <P>See appendix A for some sample modeline definitions.</P> | |
| 299 | |
| 2745 | 300 <P><B><A NAME=2.3.1.3.5>2.3.1.3.5. DGA & MPlayer</A></B></P> |
| 1612 | 301 |
| 1682 | 302 <P>DGA is used in two places with <B>MPlayer</B>: The SDL driver can be made to make |
| 303 use of it (-vo sdl:dga) and within the DGA driver (-vo dga). | |
| 304 The above said is true for both; in the following sections I'll explain | |
| 305 how the DGA driver for <B>MPlayer</B> works.</P> | |
| 1612 | 306 |
| 2745 | 307 <P><B><A NAME=2.3.1.3.6>2.3.1.3.6. Features of the DGA driver</A></B></P> |
| 1682 | 308 |
| 309 <P>The DGA driver is invoked by specifying -vo dga at the command line. | |
| 310 The default behaviour is to switch to a resolution matching the original | |
| 311 resolution of the video as close as possible. It deliberately ignores the | |
| 312 -vm and -fs switches (enabling of video mode switching and fullscreen) - | |
| 313 it always tries to cover as much area of your screen as possible by switching | |
| 314 the video mode, thus refraining to use a single additional cycle of your CPU | |
| 315 to scale the image. | |
| 316 If you don't like the mode it chooses you may force it to choose the mode | |
| 317 matching closest the resolution you specify by -x and -y. | |
| 318 By providing the -v option, the DGA driver will print, among a lot of other | |
| 319 things, a list of all resolutions supported by your current XF86-Config | |
| 320 file. | |
| 321 Having DGA2 you may also force it to use a certain depth by using the -bpp | |
| 322 option. Valid depths are 15, 16, 24 and 32. It depends on your hardware | |
| 323 whether these depths are natively supported or if a (possibly slow) | |
| 324 conversion has to be done.</P> | |
| 325 | |
| 326 <P>If you should be lucky enough to have enough offscreen memory left to | |
| 327 put a whole image there, the DGA driver will use doublebuffering, which | |
| 328 results in much smoother movie replaying. It will tell you whether double- | |
| 329 buffering is enabled or not.</P> | |
| 1612 | 330 |
| 1682 | 331 <P>Doublebuffering means that the next frame of your video is being drawn in |
| 332 some offscreen memory while the current frame is being displayed. When the | |
| 333 next frame is ready, the graphics chip is just told the location in memory | |
| 334 of the new frame and simply fetches the data to be displayed from there. | |
| 335 In the meantime the other buffer in memory will be filled again with new | |
| 336 video data.</P> | |
| 337 | |
| 338 Doublebuffering may be switched on by using the option -double and may be | |
| 339 disabled with -nodouble. Current default option is to disable | |
| 340 doublebuffering. When using the DGA driver, onscreen display (OSD) only | |
| 341 works with doublebuffering enabled. However, enabling doublebuffering may | |
| 342 result in a big speed penalty (on my K6-II+ 525 it used an additional 20% of | |
| 343 CPU time!) depending on the implementation of DGA for your hardware.</P> | |
| 344 | |
| 345 | |
| 2745 | 346 <P><B><A NAME=2.3.1.3.7>2.3.1.3.7. Speed issues</A></B></P> |
| 1682 | 347 |
| 348 <P>Generally spoken, DGA framebuffer access should be at least as fast as using | |
| 349 the X11 driver with the additional benefit of getting a fullscreen image. | |
| 350 The percentage speed values printed by mplayer have to be interpreted with | |
| 351 some care, as for example, with the X11 driver they do not include the time | |
| 352 used by the X-Server needed for the actual drawing. Hook a terminal to a | |
| 353 serial line of your box and start top to see what is really going on in your | |
| 354 box ...</P> | |
| 355 | |
| 356 <P>Generally spoken, the speedup done by using DGA against 'normal' use of X11 | |
| 357 highly depends on your graphics card and how well the X-Server module for it | |
| 358 is optimized.</P> | |
| 359 | |
| 360 <P>If you have a slow system, better use 15 or 16bit depth since they require | |
| 361 only half the memory bandwidth of a 32 bit display.</P> | |
| 1612 | 362 |
| 1682 | 363 <P>Using a depth of 24bit is even a good idea if your card natively just supports |
| 364 32 bit depth since it transfers 25% less data compared to the 32/32 mode.</P> | |
| 365 | |
| 366 <P>I've seen some avi files already be replayed on a Pentium MMX 266. AMD K6-2 | |
| 367 CPUs might work at 400 MHZ and above.</P> | |
| 1612 | 368 |
| 2745 | 369 <P><B><A NAME=2.3.1.3.8>2.3.1.3.8. Known bugs</A></B></P> |
| 1682 | 370 |
| 371 <P>Well, according to some developpers of XFree, DGA is quite a beast. They | |
| 372 tell you better not to use it. Its implementation is not always flawless | |
| 373 with every chipset driver for XFree out there.</P> | |
| 1612 | 374 |
| 1682 | 375 <P><UL> |
| 376 <LI>with XFree 4.0.3 and nv.o there is a bug resulting in strange colors | |
| 377 <LI>ATI driver requires to switch mode back more than once after finishing | |
| 378 using of DGA | |
| 379 <LI>some drivers simply fail to switch back to normal resolution (use | |
| 380 Ctrl-Alt-Keypad +, - to switch back manually) | |
| 381 <LI>some drivers simply display strange colors | |
| 382 <LI>some drivers lie about the amount of memory they map into the process's | |
| 383 address space, thus vo_dga won't use doublebuffering (SIS?) | |
| 384 <LI>some drivers seem to fail to report even a single valid mode. In this | |
| 385 case the DGA driver will crash telling you about a nonsense mode of | |
| 386 100000x100000 or the like ... | |
| 387 <LI>OSD only works with doublebuffering enabled | |
| 388 </UL></P> | |
| 389 | |
| 2745 | 390 <P><B><A NAME=2.3.1.3.9>2.3.1.3.9. Future work</A></B></P> |
| 1682 | 391 |
| 392 <P><UL><LI>use of the new X11 render interface for OSD | |
| 393 <LI>where is my TODO list ???? :-(((</UL></P> | |
| 1612 | 394 |
| 395 | |
| 2745 | 396 <P><B><A NAME=2.3.1.3.A>2.3.1.3.A. Some modelines</A></B></P> |
| 1612 | 397 |
| 1682 | 398 <PRE> |
| 1612 | 399 Section "Modes" |
| 400 Identifier "Modes[0]" | |
| 401 Modeline "800x600" 40 800 840 968 1056 600 601 605 628 | |
| 402 Modeline "712x600" 35.0 712 740 850 900 400 410 412 425 | |
| 403 Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 | |
| 404 Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan | |
| 405 Modeline "352x288" 25.10 352 368 416 432 288 296 290 310 | |
| 406 Modeline "352x240" 15.750 352 368 416 432 240 244 246 262 Doublescan | |
| 407 Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan | |
| 408 EndSection | |
| 1682 | 409 </PRE> |
| 1612 | 410 |
| 1682 | 411 <P>These entries work fine with my Riva128 chip, using nv.o XServer driver |
| 412 module.</P> | |
| 1612 | 413 |
| 414 | |
| 2745 | 415 <P><B><A NAME=2.3.1.3.B>2.3.1.3.B. Bug Reports</A></B></P> |
| 1612 | 416 |
| 1682 | 417 <P>If you experience troubles with the DGA driver please feel free to file |
| 418 a bug report to me (e-mail address below). Please start mplayer with the | |
| 419 -v option and include all lines in the bug report that start with vo_dga:</P> | |
| 420 | |
| 421 <P>Please do also include the version of X11 you are using, the graphics card | |
| 422 and your CPU type. The X11 driver module (defined in XF86-Config) might | |
| 423 also help. Thanks!</P> | |
| 1612 | 424 |
| 1682 | 425 |
| 426 <P><I>Acki (acki@acki-netz.de, www.acki-netz.de)</I></P> | |
| 1612 | 427 |
| 428 | |
| 2745 | 429 <P><B><A NAME=2.3.1.4>2.3.1.4. SDL</A></B></P> |
| 1612 | 430 |
| 1682 | 431 <P>Here are some notes about SDL out in <B>MPlayer</B>.</P> |
| 1612 | 432 |
| 433 | |
| 434 | |
| 1682 | 435 <P><TABLE BORDER=0> |
| 1987 | 436 <TD COLSPAN=4><P><B><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>There are several commandline switches for SDL:</B></P></TD><TR> |
| 437 <TD> </TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-vo sdl:name</TD><TD> </TD><TD> | |
| 438 <FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>specifies sdl video driver to use (ie. aalib, dga, x11)</TD><TR> | |
| 439 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-ao sdl:name</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>specifies sdl audio driver to use (ie. dsp, | |
| 1682 | 440 esd, arts)</TD><TR> |
| 1987 | 441 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-noxv</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>disables Xvideo hardware acceleration</TD><TR> |
| 442 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-forcexv</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>tries to force Xvideo acceleration</TD><TR> | |
| 1612 | 443 |
| 1987 | 444 <TD COLSPAN=4><P><B><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>SDL Keys:</B></P></TD><TR> |
| 1612 | 445 |
| 1987 | 446 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>F</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>toggles fullscreen/windowed mode</TD><TR> |
| 447 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>C</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>cycles available fullscreen modes</TD><TR> | |
| 448 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>W/S</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>mappings for * and / (mixer control)</TD><TR> | |
| 1612 | 449 |
| 1682 | 450 </TABLE></P> |
| 1612 | 451 |
| 1682 | 452 <P><B>KNOWN BUGS:</B></P> |
| 453 <P><UL><LI>Keys pressed under sdl:aalib console driver repeat forever. (use -vo aa !) | |
| 454 It's bug in SDL, I can't change it (tested with SDL 1.2.1). | |
| 455 </UL></P> | |
| 1612 | 456 |
| 2745 | 457 <P><B><A NAME=2.3.1.5>2.3.1.5. SVGAlib</A></B></P> |
| 1682 | 458 |
| 459 <P>If you don't have X, you can use the SVGAlib target! Be sure not to use the | |
| 460 -fs switch, since it toggles the usage of the software scaler, and it's | |
| 461 SLOOOW now, unless you have a real fast CPU (and/or MTRR?). :(</P> | |
| 1612 | 462 |
| 1682 | 463 <P>Of course you'll have to install svgalib and its development package in |
| 464 order for <B>MPlayer</B> build its SVGAlib driver (autodetected, but can be | |
| 465 forced), and don't forget to edit /etc/vga/libvga.config to suit your | |
| 466 card & monitor.</P> | |
| 1612 | 467 |
| 2745 | 468 <P><B><A NAME=2.3.1.6>2.3.1.6. Framebuffer output (FBdev)</A></B></P> |
| 1682 | 469 |
| 470 <P>Whether to build the FBdev target is autodetected during ./configure . | |
| 471 Read the framebuffer documentation in the kernel sources | |
| 472 (Documentation/fb/*) for info on how to enable it, etc.. !</P> | |
| 1612 | 473 |
| 1682 | 474 <P>If your card doesn't support VBE 2.0 standard (older ISA/PCI |
| 475 cards, such as S3 Trio64), only VBE 1.2 (or older?) : | |
| 476 Well, VESAfb is still available, but you'll have to load SciTech Display | |
| 477 Doctor (formerly UniVBE) before booting Linux. Use a DOS boot disk or | |
| 478 whatever. And don't forget to register your UniVBE ;))</P> | |
| 1612 | 479 |
| 1682 | 480 <P>The FBdev output takes some additional parameters above the others:</P> |
| 1612 | 481 |
| 1682 | 482 <P><TABLE BORDER=0> |
| 1987 | 483 <TD> </TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-fb</TD><TD> </TD><TD> |
| 484 <FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>specify the framebuffer device to use (/dev/fd0)</TD><TR> | |
| 485 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-fbmode</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>mode name to use (according to /etc/fb.modes)</TD><TR> | |
| 486 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-fbmodeconfig</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2> config file of modes (default /etc/fb.modes)</TD><TR> | |
| 487 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-monitor_hfreq</TD><TD></TD><TD ROWSPAN=3><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>IMPORTANT values, see example.conf</TD><TR> | |
| 488 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-monitor_vfreq</TD><TD></TD><TR> | |
| 489 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-monitor_dotclock</TD><TD></TD><TR> | |
| 1682 | 490 </TABLE></P> |
| 1612 | 491 |
| 1682 | 492 <P>If you want to change to a specific mode, then use</P> |
| 1612 | 493 |
| 1682 | 494 <P><CODE> mplayer -vm -fbmode (NameOfMode) filename</CODE></P> |
| 1612 | 495 |
| 1682 | 496 <P><UL><LI><B>-vm</B> alone will choose the most suitable mode from /etc/fb.modes . Can be |
| 497 used together with -x and -y options too. The -flip option is supported only | |
| 498 if the movie's pixel format matches the video mode's pixel format. | |
| 499 Pay attention to the bpp value, fbdev driver tries to use the current, | |
| 2507 | 500 or if you specify the -bpp option, then that.</LI> |
| 1682 | 501 <LI><B>-zoom</B> option isn't supported (software scaling is slow). -fs option |
| 2507 | 502 isn't supported. You can't use 8bpp (or less) modes.</LI> |
| 503 <LI>you possibly want to turn the cursor off : <CODE>echo -e '\033[?25l'</CODE><BR> | |
| 504 and the screen saver: <CODE>setterm -blank 0</CODE><BR> | |
| 505 To turn the cursor back on : <CODE>echo -e '\033[?25h'</CODE> | |
| 506 </UL></P> | |
| 1612 | 507 |
| 1682 | 508 <P>NOTE: FBdev video mode changing _does not work_ with the VESA framebuffer, |
| 509 and don't ask for it, since it's not an <B>MPlayer</B> limitation.</P> | |
| 1612 | 510 |
| 2745 | 511 <P><B><A NAME=2.3.1.7>2.3.1.7. Matrox framebuffer (mga_vid)</A></B></P> |
| 1612 | 512 |
| 1992 | 513 <P>This section is about the Matrox G200/G400/G450/G550 BES (Back-End Scaler) |
| 1682 | 514 support, the mga_vid kernel driver. It's active developed by me (A'rpi), and |
| 515 it has hardware VSYNC support with triple buffering. It works on both | |
| 516 framebuffer console and under X.</P> | |
| 517 | |
| 518 <P>To use it, you first have to compile mga_vid.o:</P> | |
| 1612 | 519 |
| 1682 | 520 <P><CODE> cd drivers<BR> |
| 521 make</CODE></P> | |
| 1612 | 522 |
| 1682 | 523 <P>Then create /dev/mga_vid device:</P> |
| 1612 | 524 |
| 1682 | 525 <P><CODE> mknod /dev/mga_vid c 178 0</CODE></P> |
| 1612 | 526 |
| 1682 | 527 <P>and load the driver with</P> |
| 528 | |
| 529 <P><CODE> insmod mga_vid.o</CODE></P> | |
| 1612 | 530 |
| 1682 | 531 <P>You should verify the memory size detection using the 'dmesg' command. If |
| 532 it's bad, use the mga_ram_size option (rmmod mga_vid first), specify card's | |
| 533 memory size in MB:</P> | |
| 1612 | 534 |
| 1682 | 535 <P><CODE> insmod mga_vid.o mga_ram_size=16</CODE></P> |
| 1612 | 536 |
| 1682 | 537 <P>To make it load/unload automatically when needed, insert the following line |
| 538 at the end of /etc/modules.conf:</P> | |
| 1612 | 539 |
| 1682 | 540 <P><CODE> alias char-major-178 mga_vid</CODE></P> |
| 1612 | 541 |
| 1682 | 542 <P>Then run</P> |
| 1612 | 543 |
| 1682 | 544 <P><CODE> depmod -a</CODE></P> |
| 1612 | 545 |
| 1682 | 546 <P>Now you have to (re)compile <B>MPlayer</B>, ./configure will detect /dev/mga_vid |
| 547 and build the 'mga' driver. Using it from <B>MPlayer</B> goes by '-vo mga' if | |
| 548 you have matroxfb console, or '-vo xmga' under XFree86 3.x.x or 4.x.x.</P> | |
| 549 | |
| 2108 | 550 <P>The mga_vid driver cooperates with Xv.</P> |
| 1612 | 551 |
| 552 | |
| 2745 | 553 <P><B><A NAME=2.3.1.8>2.3.1.8. SiS 6326 framebuffer (sis_vid)</A></B></P> |
| 1682 | 554 |
| 555 <P>SiS 6326 YUV Framebuffer driver -> sis_vid kernel driver</P> | |
| 1612 | 556 |
| 1682 | 557 <P>Its interface should be compatible with the mga_vid, but the driver was not |
| 558 updated after the mga_vid changes, so it's outdated now. Volunteers | |
| 559 needed to test it and bring the code up-to-date.</P> | |
| 1612 | 560 |
| 2745 | 561 <P><B><A NAME=2.3.1.9>2.3.1.9. 3dfx YUV support (tdfxfb)</A></B></P> |
| 1612 | 562 |
| 1992 | 563 <P>This driver uses the kernel's tdfx framebuffer driver to play movies with |
| 564 YUV acceleration. You'll need a kernel with tdfxfb support, and recompile with | |
| 565 <CODE>./configure --enable-tdfxfb</CODE></P> | |
| 1612 | 566 |
| 2745 | 567 <P><B><A NAME=2.3.1.10>2.3.1.10. OpenGL output</A></B></P> |
| 1612 | 568 |
| 1682 | 569 <P><B>MPlayer</B> support displaying movies using OpenGL. Unfortunately, not all |
| 570 drivers support this ability. For example the Utah-GLX drivers | |
| 571 (for XFree86 3.3.6) have it, with all cards. | |
| 572 See <A HREF="http://utah-glx.sourceforge.net">http://utah-glx.sourceforge.net</A> | |
| 573 for details about how to install it.</P> | |
| 1612 | 574 |
| 1682 | 575 <P>XFree86(DRI) >= 4.0.3 supports it only with Matrox, and Radeon cards. |
| 576 See <A HREF="http://dri.sourceforge.net">http://dri.sourceforge.net</A> for download, | |
| 577 and installation instructions.</P> | |
| 1612 | 578 |
| 2745 | 579 <P><B><A NAME=2.3.1.11>2.3.1.11. AAlib - text mode displaying</B></P> |
| 1612 | 580 |
| 1682 | 581 <P><B>AAlib</B> is a library for displaying graphics in text mode, using powerful |
| 582 ASCII renderer. There are LOTS of programs already supporting it, like Doom, | |
| 583 Quake, etc. MPlayer contains a very usable driver for it. | |
| 584 If ./configure detects aalib installed, the aalib libvo driver will be built.</P> | |
| 1612 | 585 |
| 1682 | 586 <P><TABLE BORDER=0> |
| 1987 | 587 <TD COLSPAN=4><P><B><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>You can use some keys in the AA Window to change rendering options:</B></P></TD><TR> |
| 588 <TD> </TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>1</TD><TD> </TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>decrease contrast</TD><TR> | |
| 589 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>2</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>increase contrast</TD><TR> | |
| 590 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>3</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>decrease brightness</TD><TR> | |
| 591 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>4</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>increase brightness</TD><TR> | |
| 592 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>5</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>switch fast rendering on/off</TD><TR> | |
| 593 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>6</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>set dithering mode (none, error distribution, floyd steinberg)</TD><TR> | |
| 594 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>7</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>invert image</TD><TR> | |
| 595 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>a</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>toggles between aa and mplayer control)</TD><TR> | |
| 1682 | 596 |
| 1987 | 597 <TD COLSPAN=4><P><B><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>The following command line options can be used:</B></P></TD><TR> |
| 1612 | 598 |
| 1987 | 599 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-aaosdcolor=V</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>change osd color</TD><TR> |
| 600 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-aasubcolor=V</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>change subtitle color</TD><TR> | |
| 601 <TD COLSPAN=3></TD><TD><P><I><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>where V can be: (0/normal, 1/dark, 2/bold, 3/boldfont, 4/reverse, 5/special)</P></TD><TR> | |
| 1612 | 602 |
| 1987 | 603 <TD COLSPAN=4><P><B><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>AAlib itselves provides a large sum of options. |
| 1682 | 604 Here are some important:</P></B></TD><TR> |
| 605 | |
| 1987 | 606 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-aadriver</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>set recommended aa driver (X11, curses, linux)</TD><TR> |
| 607 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-aaextended</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>use all 256 characters</TD><TR> | |
| 608 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-aaeight</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>use eight bit ascii</TD><TR> | |
| 609 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-aahelp</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>prints out all aalib options</TD><TR> | |
| 1682 | 610 </TABLE></P> |
| 611 | |
| 612 <P>NOTE: the rendering is very CPU intensive, especially when using AA-on-X | |
| 613 (using aalib on X), and it's least CPU intensive on standard, | |
| 614 non-framebuffer console. Use SVGATextMode to set up a big textmode, | |
| 615 then enjoy! (secondary head Hercules cards rock :)) (anyone can enhance | |
| 616 bdev to do conversion/dithering to hgafb? Would be neat :)</P> | |
| 1612 | 617 |
| 1682 | 618 <P>Use the -framedrop option if your comp isn't fast enough to render all frames!</P> |
| 1612 | 619 |
| 1682 | 620 <P>Playing on terminal you'll get better speed and quality using the linux driver, not |
| 621 curses (-aadriver linux). But therefore you need write access on /dev/vcsa<terminal>! | |
| 622 That isn't autodetected by aalib, bu vo_aa tries to find the best mode. | |
| 1731 | 623 See <A HREF="http://aa-project.sourceforge.net/tune/">http://aa-project.sourceforge.net/tune/</A> for further tuning issues.</P> |
| 1612 | 624 |
| 2471 | 625 |
| 2745 | 626 <P><B><A NAME=2.3.1.12>2.3.1.12. VESA - output to VESA BIOS</B></P> |
|
2448
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
627 <P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
628 This driver was designed and introduced as <b>generic driver</b> for any video |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
629 card which has VESA VBE 2.0 compatible BIOS. But exists still one reason of |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
630 developing of this driver - it's multiple troubles with displaying movie on TV.<BR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
631 <b>VESA BIOS EXTENSION (VBE) Version 3.0 Date: September 16, 1998</b> (Page 70) |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
632 says: |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
633 </P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
634 |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
635 <P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
636 <code><i> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
637 <b>Dual-Controller Designs</b><br> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
638 VBE 3.0 supports the dual-controller design by assuming that since both |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
639 controllers are typically provided by the same OEM, under control of a |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
640 single BIOS ROM on the same graphics card, it is possible to hide the fact |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
641 that two controllers are indeed present from the application. This has the |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
642 limitation of preventing simultaneous use of the independent controllers, |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
643 but allows applications released before VBE 3.0 to operate normally. The |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
644 VBE Function 00h (Return Controller Information) returns the combined |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
645 information of both controllers, including the combined list of available modes. |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
646 When the application selects a mode, the appropriate controller is activated. |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
647 Each of the remaining VBE functions then operates on the active controller. |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
648 </i></code> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
649 </P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
650 |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
651 <P> |
| 2471 | 652 So you have chances to get working TV-out by using this driver.<br> |
| 653 (I guess that TV-out frequently is standalone head or standalone output | |
|
2448
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
654 at least.) |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
655 </P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
656 |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
657 <P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
658 <b>What are pluses:</b><BR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
659 - You have chances to watch movies <b>if Linux even doesn't know</b> your video hardware.<BR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
660 - You don't need to have installed any graphics' related things on your Linux |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
661 (like X11 (aka XFree86), fbdev and so on). This driver can be run from |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
662 <b>text-mode</b>.<BR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
663 - You have chances to get <b>working TV-out</b>. (It's known at least for ATI's cards).<BR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
664 - This driver calls <b>int 10h</b> handler thus it's not an emulator - it |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
665 calls <b>real</b> things of <b>real</b> BIOS in <b>real</b>-mode. (Finely - |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
666 in vm86 mode).<BR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
667 - Most important :) You can watch <b>DVD at 320x200</b> if you don't have a powerful CPU.<BR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
668 </P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
669 |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
670 <P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
671 <b>What are minuses:</b><BR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
672 - It works only on <b>x86 systems</b>.<BR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
673 - <b>It's the slowest driver</b> from all the available ones for MPlayer.<BR> |
| 2747 | 674 (But only if your card doesn't support <b>DGA mode</b> - otherwise this |
| 675 driver is comparable by speed with <b>-vo dga</b> and <b>-vo fbdev</b> ones.<BR> | |
| 676 | |
|
2448
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
677 - It can be used only by <b>ROOT</b>.<BR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
678 - Currently it's available only for <b>Linux</b>.<BR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
679 - It <b>doesn't use</b> any <b>hardware accelerations</b> (like YUV overlay or hw scaling).<BR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
680 </P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
681 |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
682 <P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
683 <TABLE BORDER=0> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
684 <TD COLSPAN=4><P><B><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>These switches of command line currently are available for VESA:</B></P></TD><TR> |
| 2747 | 685 <TD> </TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-vo vesa:opts</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>currently recognized: <b>dga</b> to force dga mode and <b>nodga</b> to disable dga mode. Note: you may omit these parameters to enable <b>autodetect</b> of dga mode. (In the future also will specify mode parameters such as refresh rate, interlacing, doublescan and so on. Samples: i43, 85, d100)</TD><TR> |
|
2448
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
686 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-screenw, -screenh, -bpp</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>force userdefined mode</TD><TR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
687 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-x, -y</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>set userdefined prescaling</TD><TR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
688 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-zoom</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>enables userdefined prescaling</TD><TR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
689 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-fs</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>scales image to fullscreen</TD><TR> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
690 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-fs -zoom</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>scales userdefined prescaling to fullscreen</TD><TR> |
| 2747 | 691 <TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>-double</TD><TD></TD><TD><FONT face="Verdana, Arial, Helvetica, sans-serif" size=2>enables double buffering mode. (Available only in DGA mode). Should be slower of single buffering, but has no flickering effects.</TD><TR> |
|
2448
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
692 </TABLE> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
693 </P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
694 |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
695 <P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
696 <b>Known problems and workaround:</b><br> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
697 - If you have installed <b>NLS</b> font on your Linux box and run VESA driver |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
698 from text-mode then after terminating mplayer you will have <b>ROM font</b> loaded instead |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
699 of national. You can load national font again by using <b><i>setsysfont</i></b> utility |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
700 from for example Mandrake distribution.<br> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
701 (<b>Hint</b>: The same utility is used for localizating fbdev).<br> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
702 - Some <b>Linux graphics drivers</b> don't update active <b>BIOS mode</b> in DOS memory. So if you have such |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
703 problem - always use VESA driver only from <b>text-mode</b>. Otherwise text-mode (#03) will be |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
704 activated anyway and you will need restart your computer.<br> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
705 - Often after terminating VESA driver you get <b>black screen</b>. To return your screen |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
706 to original state - simply switch to other console (by pressing <b>Alt-Fx</b>) then switch |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
707 to your previous console by the same way.<br> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
708 - To get <b>working TV-out</b> you need have plugged tv-connector in before booting |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
709 your PC since video BIOS initializes itself only once during POST procedure. |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
710 </P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
711 |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
712 |
| 2745 | 713 <P><B><A NAME=2.3.1.A>2.3.1.A. TV-out support</A></B></P> |
| 1612 | 714 |
| 2745 | 715 <P><B><A NAME=2.3.1.A.1>2.3.1.A.1. Matrox cards</A></B></P> |
| 1612 | 716 |
| 2486 | 717 <P>Under Linux you have 2 methods to get TV out working :</P> |
| 2309 | 718 |
| 719 <P> | |
| 2486 | 720 <UL> |
| 721 <LI><B>XFree86</B>: using the driver and the HAL module, available from | |
| 722 <A HREF="http://www.matrox.com">Matrox's site</A>. This will give you X on | |
| 723 the TV.<BR> <B>This method doesn't give you accelerated playback</B> as | |
| 724 under Windoze! The second head has only YUV framebuffer, the <I>BES</I> | |
| 725 (Back End Scaler, the YUV scaler on G200/G400/G450/G550 cards) doesn't work | |
| 726 on it! The windows driver somehow workarounds this, probably by using the | |
| 727 3D engine to zoom, and the YUV framebuffer to display the zoomed | |
| 728 image. If you really want to use X, use the <CODE>-vo x11 -zoom</CODE> | |
| 729 options, but it will be <B>SLOW</B>, and has <B>Macrovision</B> copyprotection | |
| 730 enabled.</LI> | |
| 731 <LI><B>Framebuffer</B>: using the <B>matroxfb modules</B> in the 2.4 kernels. | |
| 732 2.2 kernels don't have the TVout feature in them, thus unusable for this. | |
| 733 You have to enable ALL matroxfb-specific feature during compilation, and | |
| 734 compile them into <B>modules</B>! | |
| 735 <UL> | |
| 736 <LI> | |
| 737 Enter <CODE>TVout/matroxset</CODE> and type <CODE>make</CODE>. Install | |
| 738 <CODE>matroxset</CODE> into somewhere in your PATH.</LI> | |
| 739 <LI> | |
| 740 If you don't have <CODE>fbset</CODE> installed, enter | |
| 741 <CODE>TVout/fbset</CODE> and type <CODE>make</CODE>. Install | |
| 742 <CODE>fbset</CODE> into somewhere in your PATH.</LI> | |
| 743 <LI> | |
| 744 Then enter into the <CODE>TVout/</CODE> directory in the <B>MPlayer</B> | |
| 745 source, and execute <CODE>./modules</CODE> as root. Your text-mode console | |
| 746 will enter into framebuffer mode (no way back!).</LI> | |
| 747 <LI>Next, run the <CODE>./matroxtv</CODE> script. This will present you | |
| 748 to a very simple menu. Press <B>2</B> and <B>ENTER</B>. Now you should | |
| 749 have the same picture on your monitor, and TV. The <B>3.</B> option | |
| 750 will turn on independent display, but then you <B>can't use X</B>! If | |
| 751 the TV picture has some weird stripes on it, the script wasn't able to | |
| 752 set the resolution correctly (to 640x512 by default). Use other menu | |
| 753 items randomly and it'll be OK :)</LI> | |
| 754 </UL> | |
| 755 | |
| 756 <P> | |
| 757 Yoh. Next task is to make the cursor on tty1 (or whatever) to disappear, | |
| 758 and turn off screen blanking. Execute the following commands:</P> | |
| 759 | |
| 760 <P> | |
| 761 <CODE>echo -e '\033[?25l'<BR> | |
| 762 setterm -blank 0</CODE> | |
| 763 </P> | |
| 764 | |
| 765 <P> | |
| 766 You possibly want to put the above into a script, and also clear | |
| 767 the screen.. To turn the cursor back :<BR><CODE>echo -e '\033[?25h'</CODE> | |
| 768 </P> | |
| 769 | |
| 770 <P>Yeah kewl. Start movie playing with <CODE>mplayer -vo mga -fs -screenw 640 | |
| 771 -screenh 512 <filename></CODE><BR> | |
| 772 (if you use X, now change to matroxfb with for example CTRL-ALT-F1 !)<BR> | |
| 773 Change 640x512 if you set the resolution to other..<BR> | |
| 774 <B>Enjoy the ultra-fast ultra-featured Matrox TV output (better than Xv) !</B> | |
| 775 </P> | |
| 776 </LI> | |
| 777 </LI> | |
| 778 </UL> | |
| 2309 | 779 </P> |
| 780 | |
| 781 | |
| 2745 | 782 <P><B><A NAME=2.3.1.A.2>2.3.1.A.2. ATI cards</A></B></P> |
| 2206 | 783 |
| 784 <P> | |
| 785 <b>A few word about ATI's TV-out:</b><BR> | |
| 786 Currently ATI doesn't want to support any of its TV-out chips under Linux. | |
| 787 Below is official answer from ATI Inc.: | |
| 788 | |
| 789 <P> | |
| 790 <code> | |
| 791 <i> | |
| 792 <br>> Hello! | |
| 793 <br>> | |
| 794 <br>> On your pages you wrote that you support linux developers. | |
| 795 <br>> Currently I participate with mplayer project (www.mplayerhq.hu) | |
| 796 <br>> I'm interesting with enabling TV-out on Radeon VE chips during | |
| 797 <br>> movie playback. I would be glad to add this feature to radeonfb driver | |
| 798 <br>> (which can be found in CVS tree of mplayer project at main/drivers/radeon). | |
| 799 <br>> Do I have a chance to get any official technical documenation? | |
| 800 </i> | |
| 801 <br>We will not provide TV out related documents due to macrovision concerns. | |
| 802 <br>Also mpeg2 decoding is something that we MAY consider in the future but not | |
| 803 <br>at this current time. This is again due to proprietary and 3rd party | |
| 804 <br>information. | |
| 805 </code> | |
| 806 </P> | |
| 807 | |
| 808 <P>Pity isn't?</P> | |
| 809 | |
| 810 <P> | |
| 811 <code> | |
| 812 <B>Q:What is Macrovision?</B><BR> | |
| 813 A:It's copy protection mechanism.</code> | |
| 814 </P> | |
| 815 | |
| 816 <P>It means that if they open any TV-out related information then | |
| 817 hackers will be able to disable copy protection on their chips. Therefore | |
| 818 we have no chance to get working TV-out on ATI.</P> | |
| 819 | |
| 820 <P>What's status of ATI's tv-out chips under Linux: | |
| 821 <LI><b>ATI Mach64</b> has <i>ImpacTV</i> which is supported by gatos. | |
| 822 <LI><b>ASIC Radeon VIVO</b> has <i>Rage Theatre</i> which is supported by gatos. | |
| 823 <LI><b>Radeon VE</b> and <b>Rage PRO LT</b> have <i>ImpacTV2+</i> which is not supported under Linux.</P> | |
| 824 | |
| 825 <P> | |
|
2448
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
826 Fortunately, owners of fast enough CPUs (Duron, Celeron2 and better) <b>can watch |
| 2745 | 827 movies on their TV</b> through <a href=#2.3.1.12>VESA drivers</a>. |
|
2448
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
828 </P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
829 |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
830 <P> |
| 2486 | 831 I should say good words to ATI Inc. too:<br> |
| 832 <b>they produce top quality BIOSes.</b> | |
| 2206 | 833 </P> |
| 834 | |
|
2448
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
835 <P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
836 <b>VESA drivers</b> don't use any hardware acceleration but it simulates |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
837 <b>DGA</b> through 64K window, which is configured through 32-bit mode |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
838 functions of BIOS. ATI cards have enough <b>fast video memory</b> (DIMM or DDR |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
839 chips with 64 - 128-bit access) so it's not bottleneck for them. There are no |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
840 limitations on which video mode can be displayed on your TV (like on other |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
841 cards) so you can use <b>any video mode</b> on your <b>TV</b> (from |
| 2471 | 842 <b>320x200</b> up to <b>1024x768</b>).<br> |
| 2747 | 843 From other side (it's known at least for <b>Radeons</b>) there is <b>DGA</b> |
| 844 mode which is detected automatically and in this case you'll get comparable | |
| 845 with <b>-vo dga</b> and <b>-vo fbdev</b> drivers speed.<br> | |
| 2486 | 846 Only thing you need to do - <b>have TV connector plugged in before booting your |
| 2471 | 847 PC</b> since video BIOS initializes itself only once during POST procedure. |
|
2448
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
848 </P> |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
849 |
|
1e56c3381d55
'vesa' vo driver added. By Nick Kurshev. (spellchecked, fixed, mplayerdoxized)
gabucino
parents:
2408
diff
changeset
|
850 <P> |
| 2745 | 851 For detail see <a href="video.html#2.3.1.12">VESA</a> sections of this |
| 2471 | 852 documentation. |
| 2206 | 853 </P> |
| 854 | |
|
2472
487f5bbb38ae
link to tomi ollila's voodoo3 tvout text. if he has interest to integrate
gabucino
parents:
2471
diff
changeset
|
855 |
| 2745 | 856 <P><B><A NAME=2.3.1.A.3>2.3.1.A.3. Voodoo 3</A></B></P> |
|
2472
487f5bbb38ae
link to tomi ollila's voodoo3 tvout text. if he has interest to integrate
gabucino
parents:
2471
diff
changeset
|
857 |
|
487f5bbb38ae
link to tomi ollila's voodoo3 tvout text. if he has interest to integrate
gabucino
parents:
2471
diff
changeset
|
858 <P> |
|
487f5bbb38ae
link to tomi ollila's voodoo3 tvout text. if he has interest to integrate
gabucino
parents:
2471
diff
changeset
|
859 Check <A HREF="http://www.iki.fi/too/tvout-voodoo3-3000-xfree">this URL</A>. |
|
487f5bbb38ae
link to tomi ollila's voodoo3 tvout text. if he has interest to integrate
gabucino
parents:
2471
diff
changeset
|
860 </P> |
|
487f5bbb38ae
link to tomi ollila's voodoo3 tvout text. if he has interest to integrate
gabucino
parents:
2471
diff
changeset
|
861 |
| 1612 | 862 </BODY> |
| 863 </HTML> |