Mercurial > mplayer.hg
annotate libvo/gtf.c @ 15669:d283a96c0ecb
pass along audio extradata if present
author | nicodvb |
---|---|
date | Mon, 06 Jun 2005 20:49:55 +0000 |
parents | d701716bfbbc |
children | 807aaa6415b3 |
rev | line source |
---|---|
7069 | 1 /* |
2 * Copyright (C) Rudolf Marek <r.marek@sh.cvut.cz> - Aug 2002 | |
3 * | |
4 * You can redistribute this file under terms and conditions | |
5 * of GNU General Public licence v2. | |
6 * | |
7 * GTF calculations formulas are taken from GTF_V1R1.xls | |
8 * created by ANDY.MORRISH@NSC.COM | |
9 */ | |
10 | |
11 //Version 0.4 | |
15394
d701716bfbbc
if define HAVE_ROUND do not define round again. patch by Steven M. Schultz <sms@2BSD.COM>
nplourde
parents:
7069
diff
changeset
|
12 #include "config.h" |
7069 | 13 #include <stdio.h> |
14 #include <stdlib.h> | |
15 #include <math.h> | |
16 #include "gtf.h" | |
17 | |
18 #undef GTF_DEBUG | |
19 | |
20 #ifdef GTF_DEBUG | |
21 #define DEBUG_PRINTF(a,b) printf(a,b); | |
22 #else | |
23 #define DEBUG_PRINTF(a,b) | |
24 #endif | |
25 | |
26 static GTF_constants GTF_given_constants = { 3.0,550.0,1,8,1.8,8,40,20,128,600 }; | |
27 | |
15394
d701716bfbbc
if define HAVE_ROUND do not define round again. patch by Steven M. Schultz <sms@2BSD.COM>
nplourde
parents:
7069
diff
changeset
|
28 #ifndef HAVE_ROUND |
7069 | 29 static double round(double v) |
30 { | |
31 return floor(v + 0.5); | |
32 } | |
15394
d701716bfbbc
if define HAVE_ROUND do not define round again. patch by Steven M. Schultz <sms@2BSD.COM>
nplourde
parents:
7069
diff
changeset
|
33 #endif |
7069 | 34 |
35 static void GetRoundedConstants(GTF_constants *c) | |
36 { | |
37 c->Vsync_need = round(GTF_given_constants.Vsync_need); | |
38 c->min_Vsync_BP = GTF_given_constants.min_Vsync_BP; | |
39 c->min_front_porch = round(GTF_given_constants.min_front_porch); | |
40 c->char_cell_granularity = GTF_given_constants.char_cell_granularity; | |
41 c->margin_width = GTF_given_constants.margin_width; | |
42 c->sync_width = GTF_given_constants.sync_width; | |
43 c->c = ((GTF_given_constants.c - GTF_given_constants.j)*(GTF_given_constants.k / 256)) + GTF_given_constants.j; | |
44 c->j = GTF_given_constants.j; | |
45 c->k = GTF_given_constants.k; | |
46 c->m = (GTF_given_constants.k / 256) * GTF_given_constants.m; | |
47 } | |
48 | |
49 void GTF_calcTimings(double X,double Y,double freq, int type, | |
50 int want_margins, int want_interlace,struct VesaCRTCInfoBlock *result ) | |
51 { | |
52 GTF_constants c; | |
53 double RR, margin_top, margin_bottom, margin_left, margin_right; | |
54 double estimated_H_period,sync_plus_BP,BP,interlace,V_total_lines_field; | |
55 double estimated_V_field_rate,actual_H_period,actual_V_field_freq; | |
56 double total_active_pixels, ideal_duty_cycle, blanking_time, H_total_pixels; | |
57 double H_freq, pixel_freq,actual_V_frame_freq; | |
58 double H_sync_start, H_sync_end, H_back_porch, H_front_porch, H_sync_width; | |
59 double V_back_porch, V_front_porch, V_sync_start, V_sync_end,V_sync_width; | |
60 double ideal_H_period; | |
61 GetRoundedConstants(&c); | |
62 | |
63 | |
64 pixel_freq = RR = freq; | |
65 | |
66 /* DETERMINE IF 1/2 LINE INTERLACE IS PRESENT */ | |
67 | |
68 interlace = 0; | |
69 | |
70 if (want_interlace) { | |
71 RR = RR * 2; | |
72 Y=Y/2; | |
73 interlace = 0.5; | |
74 } | |
75 | |
76 result->Flags = 0; | |
77 | |
78 if ((Y==300)||(Y==200)||(Y==240)) | |
79 { | |
80 Y*=2; | |
81 result->Flags = VESA_CRTC_DOUBLESCAN; /* TODO: check if mode support */ | |
82 } | |
83 | |
84 /* DETERMINE NUMBER OF LINES IN V MARGIN */ | |
85 /* DETERMINE NUMBER OF PIXELS IN H MARGIN [pixels] */ | |
86 | |
87 margin_left = margin_right = 0; | |
88 margin_top = margin_bottom = 0; | |
89 | |
90 if (want_margins) { | |
91 margin_top = margin_bottom = (c.margin_width / 100) * Y; | |
92 margin_left = round(( X* c.margin_width/100)/c.char_cell_granularity) \ | |
93 * c.char_cell_granularity; | |
94 margin_right = margin_left; | |
95 DEBUG_PRINTF("margin_left_right : %f\n",margin_right) | |
96 DEBUG_PRINTF("margin_top_bottom : %f\n",margin_top) | |
97 } | |
98 | |
99 /* FIND TOTAL NUMBER OF ACTIVE PIXELS (IMAGE + MARGIN) [pixels] */ | |
100 | |
101 total_active_pixels = margin_left + margin_right + X; | |
102 DEBUG_PRINTF("total_active_pixels: %f\n",total_active_pixels) | |
103 | |
104 if (type == GTF_PF) | |
105 { | |
106 ideal_H_period = ((c.c-100)+(sqrt(((100-c.c)*(100-c.c) )+(0.4*c.m*(total_active_pixels + margin_left + margin_right) / freq))))/2/c.m*1000; | |
107 | |
108 DEBUG_PRINTF("ideal_H_period: %f\n",ideal_H_period) | |
109 | |
110 /* FIND IDEAL BLANKING DUTY CYCLE FROM FORMULA [%] */ | |
111 ideal_duty_cycle = c.c - (c.m * ideal_H_period /1000); | |
112 DEBUG_PRINTF("ideal_duty_cycle: %f\n",ideal_duty_cycle) | |
113 | |
114 /* FIND BLANKING TIME (TO NEAREST CHAR CELL) [pixels] */ | |
115 | |
116 blanking_time = round(total_active_pixels * ideal_duty_cycle \ | |
117 / (100-ideal_duty_cycle) / (2*c.char_cell_granularity)) \ | |
118 * (2*c.char_cell_granularity); | |
119 DEBUG_PRINTF("blanking_time : %f\n",blanking_time ) | |
120 | |
121 /* FIND TOTAL NUMBER OF PIXELS IN A LINE [pixels] */ | |
122 H_total_pixels = total_active_pixels + blanking_time ; | |
123 DEBUG_PRINTF("H_total_pixels: %f\n",H_total_pixels) | |
124 H_freq = freq / H_total_pixels * 1000; | |
125 DEBUG_PRINTF("H_freq: %f\n",H_freq) | |
126 actual_H_period = 1000 / H_freq; | |
127 DEBUG_PRINTF("actual_H_period: %f\n",actual_H_period) | |
128 sync_plus_BP = round(H_freq * c.min_Vsync_BP/1000); | |
129 // sync_plus_BP = round( freq / H_total_pixels * c.min_Vsync_BP); | |
130 | |
131 DEBUG_PRINTF("sync_plus_BP: %f\n",sync_plus_BP) | |
132 | |
133 } else if (type == GTF_VF) | |
134 { | |
135 | |
136 /* ESTIMATE HORIZ. PERIOD [us] */ | |
137 | |
138 estimated_H_period = (( 1/RR ) - c.min_Vsync_BP/1000000 ) / (Y + (2 * margin_top) + c.min_front_porch + interlace) * 1000000; | |
139 | |
140 DEBUG_PRINTF("estimated_H_period: %f\n",estimated_H_period) | |
141 | |
142 /* FIND NUMBER OF LINES IN (SYNC + BACK PORCH) [lines] */ | |
143 | |
144 sync_plus_BP = round( c.min_Vsync_BP / estimated_H_period ); | |
145 DEBUG_PRINTF("sync_plus_BP: %f\n",sync_plus_BP) | |
146 | |
147 } else if (type == GTF_HF) | |
148 { | |
149 sync_plus_BP = round(freq * c.min_Vsync_BP/1000); | |
150 DEBUG_PRINTF("sync_plus_BP: %f\n",sync_plus_BP) | |
151 } | |
152 | |
153 | |
154 | |
155 /* FIND TOTAL NUMBER OF LINES IN VERTICAL FIELD */ | |
156 | |
157 V_total_lines_field = sync_plus_BP+interlace+margin_bottom+margin_top+Y+c.min_front_porch; | |
158 DEBUG_PRINTF("V_total_lines_field : %f\n",V_total_lines_field ) | |
159 | |
160 if (type == GTF_VF) | |
161 { | |
162 /* ESTIMATE VERTICAL FIELD RATE [hz] */ | |
163 | |
164 estimated_V_field_rate = 1 / estimated_H_period / V_total_lines_field * 1000000; | |
165 DEBUG_PRINTF(" estimated_V_field_rate: %f\n", estimated_V_field_rate) | |
166 /* FIND ACTUAL HORIZONTAL PERIOD [us] */ | |
167 | |
168 actual_H_period = estimated_H_period / (RR / estimated_V_field_rate); | |
169 DEBUG_PRINTF("actual_H_period: %f\n",actual_H_period) | |
170 /* FIND ACTUAL VERTICAL FIELD FREQUENCY [Hz] */ | |
171 | |
172 actual_V_field_freq = 1 / actual_H_period / V_total_lines_field * 1000000; | |
173 DEBUG_PRINTF("actual_V_field_freq: %f\n",actual_V_field_freq) | |
174 | |
175 /* FIND IDEAL BLANKING DUTY CYCLE FROM FORMULA [%] */ | |
176 ideal_duty_cycle = c.c - (c.m * actual_H_period /1000); | |
177 DEBUG_PRINTF("ideal_duty_cycle: %f\n",ideal_duty_cycle) | |
178 //if (type == GTF_VF) | |
179 //{ | |
180 //moved | |
181 //} | |
182 } else if (type == GTF_HF) | |
183 { | |
184 /* FIND IDEAL BLANKING DUTY CYCLE FROM FORMULA [%] */ | |
185 ideal_duty_cycle = c.c - (c.m / freq); | |
186 DEBUG_PRINTF("ideal_duty_cycle: %f\n",ideal_duty_cycle) | |
187 } | |
188 | |
189 /* FIND BLANKING TIME (TO NEAREST CHAR CELL) [pixels] */ | |
190 | |
191 if (!(type == GTF_PF)) | |
192 { | |
193 blanking_time = round(total_active_pixels * ideal_duty_cycle \ | |
194 / (100-ideal_duty_cycle) / (2*c.char_cell_granularity)) \ | |
195 * (2*c.char_cell_granularity); | |
196 DEBUG_PRINTF("blanking_time : %f\n",blanking_time ) | |
197 } | |
198 else | |
199 // if (type == GTF_PF) | |
200 { | |
201 actual_V_field_freq = H_freq / V_total_lines_field * 1000; | |
202 } | |
203 | |
204 if (type == GTF_HF) | |
205 { | |
206 /* Hz */ | |
207 actual_V_field_freq = freq / V_total_lines_field * 1000; | |
208 DEBUG_PRINTF("actual_V_field_freq: %f\n",actual_V_field_freq) | |
209 } | |
210 | |
211 | |
212 actual_V_frame_freq = actual_V_field_freq; | |
213 | |
214 /* FIND ACTUAL VERTICAL FRAME FREQUENCY [Hz]*/ | |
215 | |
216 if (want_interlace) actual_V_frame_freq = actual_V_field_freq / 2; | |
217 DEBUG_PRINTF("actual_V_frame_freq: %f\n",actual_V_frame_freq) | |
218 | |
219 // V_freq = actual_V_frame_freq; | |
220 // DEBUG_PRINTF("V_freq %f\n",V_freq) | |
221 | |
222 | |
223 if (!(type == GTF_PF)) | |
224 { | |
225 /* FIND TOTAL NUMBER OF PIXELS IN A LINE [pixels] */ | |
226 H_total_pixels = total_active_pixels + blanking_time ; | |
227 DEBUG_PRINTF("H_total_pixels: %f\n",H_total_pixels) | |
228 if (type == GTF_VF) | |
229 { | |
230 /* FIND PIXEL FREQUENCY [Mhz] */ | |
231 pixel_freq = H_total_pixels / actual_H_period ; | |
232 DEBUG_PRINTF("pixel_freq: %f\n",pixel_freq) | |
233 } else if (type == GTF_HF) | |
234 { | |
235 /* FIND PIXEL FREQUENCY [Mhz] */ | |
236 pixel_freq = H_total_pixels * freq / 1000 ; | |
237 DEBUG_PRINTF("pixel_freq: %f\n",pixel_freq) | |
238 actual_H_period = 1000/freq; | |
239 } | |
240 | |
241 /* FIND ACTUAL HORIZONTAL FREQUENCY [KHz] */ | |
242 | |
243 H_freq = 1000 / actual_H_period; | |
244 DEBUG_PRINTF("H_freq %f\n",H_freq) | |
245 | |
246 | |
247 } | |
248 | |
249 /* FIND NUMBER OF LINES IN BACK PORCH [lines] */ | |
250 | |
251 BP = sync_plus_BP - c.Vsync_need; | |
252 DEBUG_PRINTF("BP: %f\n",BP) | |
253 | |
254 /*------------------------------------------------------------------------------------------------*/ | |
255 /* FIND H SYNC WIDTH (TO NEAREST CHAR CELL) */ | |
256 H_sync_width = round(c.sync_width/100*H_total_pixels/c.char_cell_granularity)*c.char_cell_granularity; | |
257 DEBUG_PRINTF("H_sync_width %f\n",H_sync_width) | |
258 | |
259 /* FIND FRONT H PORCH(TO NEAREST CHAR CELL) */ | |
260 H_front_porch = (blanking_time/2) - H_sync_width; | |
261 DEBUG_PRINTF("H_front_porch %f\n",H_front_porch) | |
262 /* FIND BACK H PORCH(TO NEAREST CHAR CELL) */ | |
263 H_back_porch = H_sync_width + H_front_porch; | |
264 DEBUG_PRINTF("H_back_porch%f\n",H_back_porch) | |
265 | |
266 H_sync_start = H_total_pixels - (H_sync_width + H_back_porch); | |
267 DEBUG_PRINTF("H_sync_start %f\n",H_sync_start) | |
268 H_sync_end = H_total_pixels - H_back_porch; | |
269 DEBUG_PRINTF("H_sync_end %f\n",H_sync_end) | |
270 | |
271 V_back_porch = interlace + BP; | |
272 DEBUG_PRINTF("V_back_porch%f\n",V_back_porch) | |
273 V_front_porch = interlace + c.min_front_porch; | |
274 DEBUG_PRINTF("V_front_porch%f\n",V_front_porch) | |
275 | |
276 V_sync_width = c.Vsync_need; | |
277 V_sync_start = V_total_lines_field - (V_sync_width + V_back_porch); | |
278 DEBUG_PRINTF("V_sync_start %f\n",V_sync_start) | |
279 V_sync_end = V_total_lines_field - V_back_porch; | |
280 DEBUG_PRINTF("V_sync_end %f\n",V_sync_end) | |
281 | |
282 result->hTotal = H_total_pixels; | |
283 result-> hSyncStart = H_sync_start; /* Horizontal sync start in pixels */ | |
284 result-> hSyncEnd = H_sync_end; /* Horizontal sync end in pixels */ | |
285 result-> vTotal= V_total_lines_field; /* Vertical total in lines */ | |
286 result-> vSyncStart = V_sync_start; /* Vertical sync start in lines */ | |
287 result-> vSyncEnd = V_sync_end; /* Vertical sync end in lines */ | |
288 result-> Flags = (result->Flags)|VESA_CRTC_HSYNC_NEG; /* Flags (Interlaced, Double Scan etc) */ | |
289 | |
290 if (want_interlace) | |
291 { | |
292 result->Flags = (result->Flags) | VESA_CRTC_INTERLACED; | |
293 } | |
294 | |
295 result-> PixelClock = pixel_freq*1000000; /* Pixel clock in units of Hz */ | |
296 result-> RefreshRate = actual_V_frame_freq*100;/* Refresh rate in units of 0.01 Hz*/ | |
297 | |
298 } | |
299 | |
300 |