annotate libvo/vo_dga.c @ 36089:d4056035c260

Set file prior to adding to the URL list. An already existing URL list item won't be added, but the allocated url string will be freed (which thus can't be uiSetFile() nor be added to the playlist).

/*
 * X11 DGA Interface
 *
 * Copyright (C) 2001 Andreas Ackermann <[e-mail]>
 * Sourceforge username: acki2
 *
 * This file is part of MPlayer.
 *
 * MPlayer is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * MPlayer is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with MPlayer; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>

#include "config.h"
#include "video_out.h"
#include "video_out_internal.h"
#include "aspect.h"
#include "x11_common.h"
#include "fastmemcpy.h"
#include "mp_msg.h"

#include <X11/Xlib.h>
#include <X11/extensions/xf86dga.h>

#ifdef CONFIG_XF86VM
#include <X11/extensions/xf86vmode.h>
#endif

static const vo_info_t info = {
#ifdef CONFIG_DGA2
    "DGA ( Direct Graphic Access V2.0 )",
#else
#ifdef CONFIG_XF86VM
    "DGA ( Direct Graphic Access V1.0+XF86VidModeExt. )",
#else
    "DGA ( Direct Graphic Access V1.0 )",
#endif
#endif
    "dga",
    "Andreas Ackermann <[e-mail]>",
    ""
};

const LIBVO_EXTERN(dga)
//------------------------------------------------------------------
//#define BITSPP (vo_dga_modes[vo_dga_active_mode].vdm_bitspp)
//#define BYTESPP (vo_dga_modes[vo_dga_active_mode].vdm_bytespp)
#define VO_DGA_INVALID_RES 100000
#define HW_MODE (vo_dga_modes[vo_dga_hw_mode])
#define SRC_MODE (vo_dga_modes[vo_dga_src_mode])
struct vd_modes
{
    int vdm_mplayer_depth;
    int vdm_supported;
    int vdm_depth;
    int vdm_bitspp;
    int vdm_bytespp;
    int vdm_rmask;
    int vdm_gmask;
    int vdm_bmask;
    int vdm_hw_mode;
};

//------------------------------------------------------------------

static struct vd_modes vo_dga_modes[] = {
    // these entries describe HW modes
    // however, we use the same entries to tell mplayer what we support
    // so the last two values describe, which HW mode to use and which conversion
    // function to use for a mode that is not supported by HW

    {0, 0, 0, 0, 0, 0, 0, 0, 0,},
    {15, 0, 15, 16, 2, 0x7c00, 0x03e0, 0x001f, 2,},
    {16, 0, 16, 16, 2, 0xf800, 0x07e0, 0x001f, 2,},
    {24, 0, 24, 24, 3, 0xff0000, 0x00ff00, 0x0000ff, 4},
    {32, 0, 24, 32, 4, 0x00ff0000, 0x0000ff00, 0x000000ff, 4}
};

static int vo_dga_mode_num =
    sizeof(vo_dga_modes) / sizeof(struct vd_modes);

// enable a HW mode (by description)
static int vd_EnableMode(int depth, int bitspp,
                         int rmask, int gmask, int bmask)
{
    int i;

    for (i = 1; i < vo_dga_mode_num; i++)
    {
        if (vo_dga_modes[i].vdm_depth == depth &&
            vo_dga_modes[i].vdm_bitspp == bitspp &&
            vo_dga_modes[i].vdm_rmask == rmask &&
            vo_dga_modes[i].vdm_gmask == gmask &&
            vo_dga_modes[i].vdm_bmask == bmask)
        {
            vo_dga_modes[i].vdm_supported = 1;
            vo_dga_modes[i].vdm_hw_mode = i;
            return i;
        }
    }
    return 0;
}

static int vd_ModeEqual(int depth, int bitspp,
                        int rmask, int gmask, int bmask, int index)
{
    return  (vo_dga_modes[index].vdm_depth == depth &&
             vo_dga_modes[index].vdm_bitspp == bitspp &&
             vo_dga_modes[index].vdm_rmask == rmask &&
             vo_dga_modes[index].vdm_gmask == gmask &&
             vo_dga_modes[index].vdm_bmask == bmask) ? 1 : 0;
}


// enable a HW mode (mplayer_depth decides which)
static int vd_ValidateMode(int mplayer_depth)
{
    int i;

    if (mplayer_depth == 0)
        return 0;
    for (i = 1; i < vo_dga_mode_num; i++)
    {
        if (vo_dga_modes[i].vdm_mplayer_depth == mplayer_depth)
        {
            vo_dga_modes[i].vdm_supported = 1;
            vo_dga_modes[i].vdm_hw_mode = i;
            return i;
        }
    }
    return 0;
}

// do we support this mode? (not important whether native or conversion)
static int vd_ModeValid(int mplayer_depth)
{
    int i;

    if (mplayer_depth == 0)
        return 0;
    for (i = 1; i < vo_dga_mode_num; i++)
    {
        if (vo_dga_modes[i].vdm_mplayer_depth == mplayer_depth &&
            vo_dga_modes[i].vdm_supported != 0)
        {
            return i;
        }
    }
    return 0;
}

static char *vd_GetModeString(int index)
{

#define VO_DGA_MAX_STRING_LEN 100
    static char stringbuf[VO_DGA_MAX_STRING_LEN];

    stringbuf[VO_DGA_MAX_STRING_LEN - 1] = 0;
    snprintf(stringbuf, VO_DGA_MAX_STRING_LEN - 2,
             "depth=%d, bpp=%d, r=%06x, g=%06x, b=%06x, %s (-bpp %d)",
             vo_dga_modes[index].vdm_depth,
             vo_dga_modes[index].vdm_bitspp,
             vo_dga_modes[index].vdm_rmask,
             vo_dga_modes[index].vdm_gmask,
             vo_dga_modes[index].vdm_bmask,
             vo_dga_modes[index].
             vdm_supported ? "native" : "not supported",
             vo_dga_modes[index].vdm_mplayer_depth);
    return stringbuf;
}

//-----------------------------------------------------------------

#if defined(CONFIG_XF86VM) && !defined(CONFIG_DGA2)
static XF86VidModeModeInfo **vo_dga_vidmodes = NULL;
#endif


static int vo_dga_src_format;
static int vo_dga_width;        // bytes per line in framebuffer
static int vo_dga_vp_width;     // visible pixels per line in

                                         // framebuffer
static int vo_dga_vp_height;    // visible lines in framebuffer
static int vo_dga_is_running = 0;
static int vo_dga_src_width;    // width of video in pixels
static int vo_dga_src_height;   // height of video in pixels
static int vo_dga_src_offset = 0;       // offset in src
static int vo_dga_vp_offset = 0;        // offset in dest
static int vo_dga_bytes_per_line;       // bytes per line to copy
static int vo_dga_vp_skip;      // dto. for dest
static int vo_dga_lines;        // num of lines to copy
static int vo_dga_hw_mode = 0;  // index in mode list that is actually

                                         // used by framebuffer
static int vo_dga_src_mode = 0; // index in mode list that is used by

                                         // codec
static int vo_dga_XServer_mode = 0;     // index in mode list for resolution

#ifdef CONFIG_DGA2
static XDGAMode *vo_modelines;
static int vo_modecount;
#endif

#define MAX_NR_VIDEO_BUFFERS 3

#define CURRENT_VIDEO_BUFFER \
        (vo_dga_video_buffer[vo_dga_current_video_buffer])

static int vo_dga_nr_video_buffers;     // Total number of frame buffers.
static int vo_dga_current_video_buffer; // Buffer available for rendering.

static struct video_buffer
{
    int y;
    uint8_t *data;
} vo_dga_video_buffer[MAX_NR_VIDEO_BUFFERS];

/* saved src and dst dimensions for SwScaler */
static unsigned int scale_srcW = 0,
    scale_dstW = 0, scale_srcH = 0, scale_dstH = 0;

//---------------------------------------------------------

static void draw_alpha(int x0, int y0, int w, int h, unsigned char *src,
                       unsigned char *srca, int stride)
{

    char *d;
    unsigned int offset;
    int buffer_stride;
    int bpp = pixel_stride(vo_dga_src_format);
    vo_draw_alpha_func draw = vo_get_draw_alpha(vo_dga_src_format);

    offset = vo_dga_width * y0 + x0;
    buffer_stride = vo_dga_width * bpp;
    d = CURRENT_VIDEO_BUFFER.data + vo_dga_vp_offset;
    d += bpp * offset;

    if (draw) draw(w, h, src, srca, stride, d, buffer_stride);
}


//---------------------------------------------------------




// quick & dirty - for debugging only
#if 0
static void fillblock(char *strt, int yoff, int lines, int val)
{
    char *i;

    for (i = strt + yoff * vo_dga_width * HW_MODE.vdm_bytespp;
         i < strt + (lines + yoff) * vo_dga_width * HW_MODE.vdm_bytespp;)
    {
        *i++ = val;
    }
}
#endif

//---------------------------------------------------------

static int draw_frame(uint8_t * src[])
{

    int numlines = vo_dga_lines;

    char *s, *d;

    s = *src;
    d = CURRENT_VIDEO_BUFFER.data + vo_dga_vp_offset;

    mem2agpcpy_pic(d, s,
                   vo_dga_bytes_per_line,
                   numlines,
                   vo_dga_bytes_per_line + vo_dga_vp_skip,
                   vo_dga_bytes_per_line);

    // DBG-COde

#if 0
    d = CURRENT_VIDEO_BUFFER.data + vo_dga_vp_offset;
    fillblock(d, 0, 10, 0x800000ff);
    fillblock(d, 10, 10, 0x8000ff00);
    fillblock(d, 20, 10, 0x80ff0000);
    fillblock(d, 30, 10, 0xff0000ff);
    fillblock(d, 40, 10, 0x800000ff);
    fillblock(d, 50, 10, 0x0f0000ff);
#endif
    return 0;
}

//---------------------------------------------------------

static void check_events(void)
{
    vo_x11_check_events(mDisplay);
}

//---------------------------------------------------------

#include "sub/sub.h"

static void draw_osd(void)
{
    vo_draw_text(vo_dga_src_width, vo_dga_src_height, draw_alpha);
}

static void switch_video_buffers(void)
{
    vo_dga_current_video_buffer =
        (vo_dga_current_video_buffer + 1) % vo_dga_nr_video_buffers;
}

static void flip_page(void)
{
    if (1 < vo_dga_nr_video_buffers)
    {
#ifdef CONFIG_DGA2
        XDGASetViewport(mDisplay, mScreen,
                        0, CURRENT_VIDEO_BUFFER.y, XDGAFlipRetrace);
#else
        XF86DGASetViewPort(mDisplay, mScreen, 0, CURRENT_VIDEO_BUFFER.y);
#endif
        switch_video_buffers();
    }
}

//---------------------------------------------------------

static int draw_slice(uint8_t * src[], int stride[],
                           int w, int h, int x, int y)
{
    return 0;
};

//---------------------------------------------------------

static int query_format(uint32_t format)
{

    if ((format & IMGFMT_BGR_MASK) == IMGFMT_BGR &&
        vd_ModeValid(format & 0xff))
    {
        return VFCAP_CSP_SUPPORTED | VFCAP_CSP_SUPPORTED_BY_HW | VFCAP_OSD;
    }

    return 0;
}

//---------------------------------------------------------

static void uninit(void)
{

#ifdef CONFIG_DGA2
    XDGADevice *dgadevice;
#endif

    if (!vo_config_count)
        return;

    if (vo_dga_is_running)
    {
        vo_dga_is_running = 0;
        mp_msg(MSGT_VO, MSGL_V, "vo_dga: in uninit\n");
        if (vo_grabpointer)
            XUngrabPointer(mDisplay, CurrentTime);
        XUngrabKeyboard(mDisplay, CurrentTime);
#ifdef CONFIG_DGA2
        XDGACloseFramebuffer(mDisplay, mScreen);
        dgadevice = XDGASetMode(mDisplay, mScreen, 0);
        if (dgadevice != NULL)
        {
            XFree(dgadevice);
        }
#else
        XF86DGADirectVideo(mDisplay, mScreen, 0);
        // first disable DirectVideo and then switch mode back!
#ifdef CONFIG_XF86VM
        if (vo_dga_vidmodes != NULL)
        {
            int screen;

            screen = XDefaultScreen(mDisplay);
            mp_msg(MSGT_VO, MSGL_V,
                   "vo_dga: VidModeExt: Switching back..\n");
            // seems some graphics adaptors need this more than once ...
            XF86VidModeSwitchToMode(mDisplay, screen, vo_dga_vidmodes[0]);
            XF86VidModeSwitchToMode(mDisplay, screen, vo_dga_vidmodes[0]);
            XF86VidModeSwitchToMode(mDisplay, screen, vo_dga_vidmodes[0]);
            XF86VidModeSwitchToMode(mDisplay, screen, vo_dga_vidmodes[0]);
            XFree(vo_dga_vidmodes);
        }
#endif
#endif
    }
    vo_x11_uninit();
}


//----------------------------------------------------------
// TODO: check for larger maxy value
// (useful for double buffering!!!)

static int check_res(int num, int x, int y, int bpp,
                     int new_x, int new_y, int new_vbi, int new_maxy,
                     int *old_x, int *old_y, int *old_vbi, int *old_maxy)
{

    mp_msg(MSGT_VO, MSGL_V,
           "vo_dga: (%3d) Trying %4d x %4d @ %3d Hz @ depth %2d ..", num,
           new_x, new_y, new_vbi, bpp);
    mp_msg(MSGT_VO, MSGL_V, "(old: %dx%d@%d).", *old_x, *old_y, *old_vbi);
    if ((new_x >= x) && (new_y >= y) && (
                                            // prefer a better resolution either in X or in Y
                                            // as long as the other dimension is at least the same
                                            //
                                            // hmm ... MAYBE it would be more clever to focus on the
                                            // x-resolution; I had 712x400 and 640x480 and the movie
                                            // was 640x360; 640x480 would be the 'right thing' here
                                            // but since 712x400 was queried first I got this one.
                                            // I think there should be a cmd-line switch to let the
                                            // user choose the mode he likes ...   (acki2)
                                            (((new_x < *old_x) &&
                                              !(new_y > *old_y)) ||
                                             ((new_y < *old_y) &&
                                              !(new_x > *old_x)))
                                            // but if we get an identical resolution choose
                                            // the one with the lower refreshrate (saves bandwidth !!!)
                                            // as long as it's above 50 Hz (acki2 on 30/3/2001)
                                            ||
                                            (((new_x == *old_x) &&
                                              (new_y == *old_y) &&
                                              ((new_vbi >= *old_vbi
                                                && *old_vbi < 50)
                                               || (*old_vbi >= 50
                                                   && new_vbi < *old_vbi
                                                   && new_vbi >= 50))) ||
                                             // if everything is equal, then use the mode with the lower
                                             // stride
                                             ((new_x == *old_x) &&
                                              (new_y == *old_y) &&
                                              (new_vbi == *old_vbi) &&
                                              (new_maxy > *old_maxy)))))
    {
        *old_x = new_x;
        *old_y = new_y;
        *old_maxy = new_maxy;
        *old_vbi = new_vbi;
        mp_msg(MSGT_VO, MSGL_V, ".ok!!\n");
        return 1;
    } else
    {
        mp_msg(MSGT_VO, MSGL_V, ".no\n");
        return 0;
    }
}



//---------------------------------------------------------

static void init_video_buffers(uint8_t * buffer_base,
                               int view_port_height,
                               int bytes_per_scanline,
                               int max_view_port_y,
                               int use_multiple_buffers)
{
    int bytes_per_buffer = view_port_height * bytes_per_scanline;
    int i;

    if (use_multiple_buffers)
        vo_dga_nr_video_buffers = max_view_port_y / view_port_height;
    else
        vo_dga_nr_video_buffers = 1;

    if (vo_dga_nr_video_buffers > MAX_NR_VIDEO_BUFFERS)
        vo_dga_nr_video_buffers = MAX_NR_VIDEO_BUFFERS;
    if (vo_dga_nr_video_buffers <= 0)
        vo_dga_nr_video_buffers = 1;

    vo_dga_current_video_buffer = 0;

    for (i = 0; i < vo_dga_nr_video_buffers; i++)
    {
        vo_dga_video_buffer[i].y = i * view_port_height;
        vo_dga_video_buffer[i].data = buffer_base + i * bytes_per_buffer;

        // Clear video buffer.
        memset(vo_dga_video_buffer[i].data, 0, bytes_per_buffer);
    }
}

static int config(uint32_t width, uint32_t height,
                       uint32_t d_width, uint32_t d_height,
                       uint32_t flags, char *title, uint32_t format)
{

    int x_off, y_off;
    int wanted_width, wanted_height;

    static unsigned char *vo_dga_base;
    static int prev_width, prev_height;

#ifdef CONFIG_DGA2
    // needed to change DGA video mode
    int mX = VO_DGA_INVALID_RES, mY = VO_DGA_INVALID_RES, mVBI =
        100000, mMaxY = 0, i, j = 0;
    int dga_modenum;
    XDGAMode *modeline;
    XDGADevice *dgadevice;
#else
#ifdef CONFIG_XF86VM
    unsigned int vm_event, vm_error;
    unsigned int vm_ver, vm_rev;
    int i, j = 0, have_vm = 0;
    int mX = VO_DGA_INVALID_RES, mY = VO_DGA_INVALID_RES, mVBI =
        100000, mMaxY = 0, dga_modenum;
#endif
    int bank, ram;
#endif

    vo_dga_src_format = format;

    wanted_width = d_width;
    wanted_height = d_height;

    if (!wanted_height)
        wanted_height = height;
    if (!wanted_width)
        wanted_width = width;

    if (!vo_dbpp)
    {
        if ((format & IMGFMT_BGR_MASK) == IMGFMT_BGR)
        {
            vo_dga_src_mode = vd_ModeValid(format & 0xff);
        }
    } else
    {
        vo_dga_src_mode = vd_ModeValid(vo_dbpp);
    }
    vo_dga_hw_mode = SRC_MODE.vdm_hw_mode;

    if (!vo_dga_src_mode)
    {
        mp_msg(MSGT_VO, MSGL_ERR, "vo_dga: unsupported video format!\n");
        return 1;
    }

    vo_dga_vp_width = vo_screenwidth;
    vo_dga_vp_height = vo_screenheight;

    mp_msg(MSGT_VO, MSGL_V, "vo_dga: XServer res: %dx%d\n",
           vo_dga_vp_width, vo_dga_vp_height);

// choose a suitable mode ...

#ifdef CONFIG_DGA2
// Code to change the video mode added by Michael Graffam
// [e-mail]

    mp_msg(MSGT_VO, MSGL_V, "vo_dga: vo_modelines=%p, vo_modecount=%d\n",
           vo_modelines, vo_modecount);

    if (vo_modelines == NULL)
    {
        mp_msg(MSGT_VO, MSGL_ERR, "vo_dga: can't get modelines\n");
        return 1;
    }

    mp_msg(MSGT_VO, MSGL_INFO,
           "vo_dga: DGA 2.0 available :-) Can switch resolution AND depth!\n");
    for (i = 0; i < vo_modecount; i++)
    {
        if (vd_ModeEqual(vo_modelines[i].depth,
                         vo_modelines[i].bitsPerPixel,
                         vo_modelines[i].redMask,
                         vo_modelines[i].greenMask,
                         vo_modelines[i].blueMask, vo_dga_hw_mode))
        {

            mp_msg(MSGT_VO, MSGL_V, "maxy: %4d, depth: %2d, %4dx%4d, ",
                   vo_modelines[i].maxViewportY, vo_modelines[i].depth,
                   vo_modelines[i].imageWidth,
                   vo_modelines[i].imageHeight);
            if (check_res
                (i, wanted_width, wanted_height, vo_modelines[i].depth,
                 vo_modelines[i].viewportWidth,
                 vo_modelines[i].viewportHeight,
                 (unsigned) vo_modelines[i].verticalRefresh,
                 vo_modelines[i].maxViewportY, &mX, &mY, &mVBI, &mMaxY))
                j = i;
        }
    }
    mp_msg(MSGT_VO, MSGL_INFO,
           "vo_dga: Selected hardware mode %4d x %4d @ %3d Hz @ depth %2d, bitspp %2d.\n",
           mX, mY, mVBI, HW_MODE.vdm_depth, HW_MODE.vdm_bitspp);
    mp_msg(MSGT_VO, MSGL_INFO,
           "vo_dga: Video parameters by codec: %3d x %3d, depth %2d, bitspp %2d.\n",
           width, height, SRC_MODE.vdm_depth, SRC_MODE.vdm_bitspp);
    vo_dga_vp_width = mX;
    vo_dga_vp_height = mY;

    if ((flags & VOFLAG_SWSCALE) || (flags & VOFLAG_FULLSCREEN))
    {                           /* -zoom or -fs */
        scale_dstW = (d_width + 7) & ~7;
        scale_dstH = d_height;
        scale_srcW = width;
        scale_srcH = height;
        aspect_save_screenres(mX, mY);
        aspect_save_orig(scale_srcW, scale_srcH);
        aspect_save_prescale(scale_dstW, scale_dstH);
        if (flags & VOFLAG_FULLSCREEN)       /* -fs */
            aspect(&scale_dstW, &scale_dstH, A_ZOOM);
        else if (flags & VOFLAG_SWSCALE)  /* -fs */
            aspect(&scale_dstW, &scale_dstH, A_NOZOOM);
        mp_msg(MSGT_VO, MSGL_INFO,
               "vo_dga: Aspect corrected size for SwScaler: %4d x %4d.\n",
               scale_dstW, scale_dstH);
        /* XXX this is a hack, but I'm lazy ;-) :: atmos */
        width = scale_dstW;
        height = scale_dstH;
    }

    vo_dga_width = vo_modelines[j].bytesPerScanline / HW_MODE.vdm_bytespp;
    dga_modenum = vo_modelines[j].num;
    modeline = vo_modelines + j;

#else

#ifdef CONFIG_XF86VM

    mp_msg(MSGT_VO, MSGL_INFO,
           "vo_dga: DGA 1.0 compatibility code: Using XF86VidMode for mode switching!\n");

    if (XF86VidModeQueryExtension(mDisplay, &vm_event, &vm_error))
    {
        XF86VidModeQueryVersion(mDisplay, &vm_ver, &vm_rev);
        mp_msg(MSGT_VO, MSGL_INFO,
               "vo_dga: XF86VidMode Extension v%i.%i\n", vm_ver, vm_rev);
        have_vm = 1;
    } else
    {
        mp_msg(MSGT_VO, MSGL_ERR,
               "vo_dga: XF86VidMode Extension not available.\n");
    }

#define GET_VREFRESH(dotclk, x, y)( (((dotclk)/(x))*1000)/(y) )

    if (have_vm)
    {
        int modecount;

        XF86VidModeGetAllModeLines(mDisplay, mScreen, &modecount,
                                   &vo_dga_vidmodes);

        if (vo_dga_vidmodes != NULL)
        {
            for (i = 0; i < modecount; i++)
            {
                if (check_res(i, wanted_width, wanted_height,
                              vo_dga_modes[vo_dga_hw_mode].vdm_depth,
                              vo_dga_vidmodes[i]->hdisplay,
                              vo_dga_vidmodes[i]->vdisplay,
                              GET_VREFRESH(vo_dga_vidmodes[i]->dotclock,
                                           vo_dga_vidmodes[i]->htotal,
                                           vo_dga_vidmodes[i]->vtotal),
                              0, &mX, &mY, &mVBI, &mMaxY))
                    j = i;
            }

            mp_msg(MSGT_VO, MSGL_INFO,
                   "vo_dga: Selected video mode %4d x %4d @ %3d Hz @ depth %2d, bitspp %2d, video %3d x %3d.\n",
                   mX, mY, mVBI,
                   vo_dga_modes[vo_dga_hw_mode].vdm_depth,
                   vo_dga_modes[vo_dga_hw_mode].vdm_bitspp, width, height);
        } else
        {
            mp_msg(MSGT_VO, MSGL_INFO,
                   "vo_dga: XF86VidMode returned no screens - using current resolution.\n");
        }
        dga_modenum = j;
        vo_dga_vp_width = mX;
        vo_dga_vp_height = mY;
    }

#else
    mp_msg(MSGT_VO, MSGL_INFO,
           "vo_dga: Only have DGA 1.0 extension and no XF86VidMode :-(\n");
    mp_msg(MSGT_VO, MSGL_INFO,
           "        Thus, resolution switching is NOT possible.\n");

#endif
#endif

    vo_dga_src_width = width;
    vo_dga_src_height = height;

    if (vo_dga_src_width > vo_dga_vp_width ||
        vo_dga_src_height > vo_dga_vp_height)
    {
        mp_msg(MSGT_VO, MSGL_ERR,
               "vo_dga: Sorry, video larger than viewport is not yet supported!\n");
        // ugly, do something nicer in the future ...
#ifndef CONFIG_DGA2
#ifdef CONFIG_XF86VM
        if (vo_dga_vidmodes)
        {
            XFree(vo_dga_vidmodes);
            vo_dga_vidmodes = NULL;
        }
#endif
#endif
        return 1;
    }

    if (vo_dga_vp_width == VO_DGA_INVALID_RES)
    {
        mp_msg(MSGT_VO, MSGL_ERR,
               "vo_dga: Something is wrong with your DGA. There doesn't seem to be a\n"
               "         single suitable mode!\n"
               "         Please file a bug report (see DOCS/HTML/en/bugreports.html)\n");
#ifndef CONFIG_DGA2
#ifdef CONFIG_XF86VM
        if (vo_dga_vidmodes)
        {
            XFree(vo_dga_vidmodes);
            vo_dga_vidmodes = NULL;
        }
#endif
#endif
        return 1;
    }
// now let's start the DGA thing

    if (!vo_config_count || width != prev_width || height != prev_height)
    {
#ifdef CONFIG_DGA2

        if (!XDGAOpenFramebuffer(mDisplay, mScreen))
        {
            mp_msg(MSGT_VO, MSGL_ERR,
                   "vo_dga: Framebuffer mapping failed!!!\n");
            return 1;
        }

        dgadevice = XDGASetMode(mDisplay, mScreen, dga_modenum);
        XDGASync(mDisplay, mScreen);

        vo_dga_base = dgadevice->data;
        XFree(dgadevice);

        XDGASetViewport(mDisplay, mScreen, 0, 0, XDGAFlipRetrace);

#else

#ifdef CONFIG_XF86VM
        if (have_vm)
        {
            XF86VidModeLockModeSwitch(mDisplay, mScreen, 0);
            // Two calls are needed to switch modes on my ATI Rage 128. Why?
            // for riva128 one call is enough!
            XF86VidModeSwitchToMode(mDisplay, mScreen,
                                    vo_dga_vidmodes[dga_modenum]);
            XF86VidModeSwitchToMode(mDisplay, mScreen,
                                    vo_dga_vidmodes[dga_modenum]);
        }
#endif

        XF86DGAGetViewPortSize(mDisplay, mScreen,
                               &vo_dga_vp_width, &vo_dga_vp_height);

        XF86DGAGetVideo(mDisplay, mScreen,
                        (char **) &vo_dga_base, &vo_dga_width, &bank,
                        &ram);

        XF86DGADirectVideo(mDisplay, mScreen,
                           XF86DGADirectGraphics | XF86DGADirectMouse |
                           XF86DGADirectKeyb);

        XF86DGASetViewPort(mDisplay, mScreen, 0, 0);

#endif
    }
    // do some more checkings here ...

    mp_msg(MSGT_VO, MSGL_V,
           "vo_dga: bytes/line: %d, screen res: %dx%d, depth: %d, base: %p, bpp: %d\n",
           vo_dga_width, vo_dga_vp_width, vo_dga_vp_height,
           HW_MODE.vdm_bytespp, vo_dga_base, HW_MODE.vdm_bitspp);

    x_off = (vo_dga_vp_width - vo_dga_src_width) >> 1;
    y_off = (vo_dga_vp_height - vo_dga_src_height) >> 1;

    vo_dga_bytes_per_line = vo_dga_src_width * HW_MODE.vdm_bytespp;
    vo_dga_lines = vo_dga_src_height;

    vo_dga_src_offset = 0;
    vo_dga_vp_offset =
        (y_off * vo_dga_width + x_off) * HW_MODE.vdm_bytespp;

    vo_dga_vp_skip = (vo_dga_width - vo_dga_src_width) * HW_MODE.vdm_bytespp;   // todo

    mp_msg(MSGT_VO, MSGL_V, "vo_dga: vp_off=%d, vp_skip=%d, bpl=%d\n",
           vo_dga_vp_offset, vo_dga_vp_skip, vo_dga_bytes_per_line);


    XGrabKeyboard(mDisplay, DefaultRootWindow(mDisplay), True,
                  GrabModeAsync, GrabModeAsync, CurrentTime);
    if (vo_grabpointer)
        XGrabPointer(mDisplay, DefaultRootWindow(mDisplay), True,
                     ButtonPressMask, GrabModeAsync, GrabModeAsync,
                     None, None, CurrentTime);

    if (!vo_config_count || width != prev_width || height != prev_height)
    {
        init_video_buffers(vo_dga_base,
                           vo_dga_vp_height,
                           vo_dga_width * HW_MODE.vdm_bytespp,
#ifdef CONFIG_DGA2
                           modeline->maxViewportY,
#else
                           vo_dga_vp_height,
#endif
                           vo_doublebuffering);
        prev_width = width;
        prev_height = height;
    }

    mp_msg(MSGT_VO, MSGL_V, "vo_dga: Using %d frame buffer%s.\n",
           vo_dga_nr_video_buffers,
           vo_dga_nr_video_buffers == 1 ? "" : "s");

    vo_dga_is_running = 1;
    return 0;
}

static int dga_depths_init = 0;

static int preinit(const char *arg)
{
    if (arg)
    {
        mp_msg(MSGT_VO, MSGL_INFO, "vo_dga: Unknown subdevice: %s\n", arg);
        return ENOSYS;
    }

    if (!vo_init())
        return -1;              // Can't open X11

    if (dga_depths_init == 0)
    {                           // FIXME!?
        int i;

        vo_dga_XServer_mode = vd_ValidateMode(vo_depthonscreen);

        if (vo_dga_XServer_mode == 0)
        {
#ifndef CONFIG_DGA2
            mp_msg(MSGT_VO, MSGL_ERR,
                   "vo_dga: Your X-Server is not running in a ");
            mp_msg(MSGT_VO, MSGL_ERR,
                   "resolution supported by DGA driver!\n");
#endif
        }                       //else{
        //  mp_msg(MSGT_VO, MSGL_V, "vo_dga: X running at: %s\n",
        //            vd_GetModeString(vo_dga_XServer_mode));
        //}

#ifdef CONFIG_DGA2
        vo_modelines = XDGAQueryModes(mDisplay, mScreen, &vo_modecount);
        if (vo_modelines)
        {
            for (i = 0; i < vo_modecount; i++)
            {
                mp_msg(MSGT_VO, MSGL_V,
                       "vo_dga: (%03d) depth=%d, bpp=%d, r=%08lx, g=%08lx, b=%08lx, %d x %d\n",
                       i, vo_modelines[i].depth,
                       vo_modelines[i].bitsPerPixel,
                       vo_modelines[i].redMask, vo_modelines[i].greenMask,
                       vo_modelines[i].blueMask,
                       vo_modelines[i].viewportWidth,
                       vo_modelines[i].viewportHeight);
                vd_EnableMode(vo_modelines[i].depth,
                              vo_modelines[i].bitsPerPixel,
                              vo_modelines[i].redMask,
                              vo_modelines[i].greenMask,
                              vo_modelines[i].blueMask);
            }
        }
#endif
        dga_depths_init = 1;

        if (!vo_dga_modes[1].vdm_supported
            && vo_dga_modes[2].vdm_supported)
        {
            vo_dga_modes[1].vdm_supported = 1;
        }

        if (!vo_dga_modes[3].vdm_supported
            && vo_dga_modes[4].vdm_supported)
        {
            vo_dga_modes[3].vdm_supported = 1;
        }

        for (i = 1; i < vo_dga_mode_num; i++)
        {
            mp_msg(MSGT_VO, MSGL_INFO, "vo_dga: Mode: %s",
                   vd_GetModeString(i));
            if (vo_dbpp && vo_dbpp != vo_dga_modes[i].vdm_mplayer_depth)
            {
                vo_dga_modes[i].vdm_supported = 0;
                mp_msg(MSGT_VO, MSGL_INFO, " ...disabled by -bpp %d",
                       vo_dbpp);
            }
            mp_msg(MSGT_VO, MSGL_INFO, "\n");
        }
    }

    return 0;
}

static uint32_t get_image(mp_image_t * mpi)
{
    if (!IMGFMT_IS_BGR(mpi->imgfmt) ||
        (IMGFMT_BGR_DEPTH(mpi->imgfmt) !=
         vo_dga_modes[vo_dga_hw_mode].vdm_mplayer_depth)
        || (mpi->type == MP_IMGTYPE_STATIC && vo_dga_nr_video_buffers > 1)
        || (mpi->type == MP_IMGTYPE_IP && vo_dga_nr_video_buffers < 2)
        || (mpi->type == MP_IMGTYPE_IPB))
        return VO_FALSE;

    if ((mpi->flags & MP_IMGFLAG_ACCEPT_STRIDE) ||
        (mpi->flags & MP_IMGFLAG_ACCEPT_WIDTH &&
         ((vo_dga_bytes_per_line + vo_dga_vp_skip) % (mpi->bpp / 8)) == 0)
        || (mpi->width * (mpi->bpp / 8) ==
            (vo_dga_bytes_per_line + vo_dga_vp_skip)))
    {

        mpi->planes[0] = CURRENT_VIDEO_BUFFER.data + vo_dga_vp_offset;
        mpi->stride[0] = vo_dga_bytes_per_line + vo_dga_vp_skip;
        mpi->width =
            (vo_dga_bytes_per_line + vo_dga_vp_skip) / (mpi->bpp / 8);
        mpi->flags |= MP_IMGFLAG_DIRECT;
        return VO_TRUE;
    }

    return VO_FALSE;
}

static int control(uint32_t request, void *data)
{
    switch (request)
    {
        case VOCTRL_GET_IMAGE:
            return get_image(data);
        case VOCTRL_QUERY_FORMAT:
            return query_format(*((uint32_t *) data));
    }
    return VO_NOTIMPL;
}

//---------------------------------------------------------