annotate Makefile @ 2251:d6456c4160c2

*** empty log message ***

# LINUX Makefile made by A'rpi / Astral
# Some cleanup by LGB: 	* 'make -C dir' instead of 'cd dir;make;cd..'
#			* for loops instead of linear sequence of make directories
#			* some minor problems with make clean and distclean were corrected
#			* DVD support

include config.mak

PRG = mplayer
PRG_HQ = mplayerHQ
PRG_AVIP = aviparse
PRG_FIBMAP = fibmap_mplayer
PRG_TV = tvision
PRG_CFG = codec-cfg

#prefix = /usr/local
BINDIR = ${prefix}/bin
# BINDIR = /usr/local/bin
SRCS = postproc/swscale.c postproc/postprocess.c mp_msg.c open.c parse_es.c ac3-iec958.c find_sub.c aviprint.c dec_audio.c dec_video.c aviwrite.c aviheader.c asfheader.c demux_avi.c demux_asf.c demux_mpg.c demux_mov.c demuxer.c stream.c codec-cfg.c subreader.c linux/getch2.c linux/timer-lx.c linux/shmem.c xa/xa_gsm.c xa/rle8.c lirc_mp.c cfgparser.c mixer.c dvdauth.c spudec.c $(STREAM_SRCS)
OBJS = $(SRCS:.c=.o)
CFLAGS = $(OPTFLAGS) -Iloader -Ilibvo $(CSS_INC) $(EXTRA_INC) # -Wall
A_LIBS = -Lmp3lib -lMP3 -Llibac3 -lac3 $(ALSA_LIB) $(ESD_LIB)
VO_LIBS = -Llibvo -lvo $(MLIB_LIB) $(X_LIBS)

PARTS = mp3lib libac3 libmpeg2 opendivx libavcodec encore libvo libao2 drivers drivers/syncfb
ifeq ($(GUI),yes)
PARTS += Gui
endif

ifneq ($(W32_LIB),)
PARTS += loader loader/DirectShow
SRCS += dll_init.c
endif
LOADER_DEP = $(W32_DEP) $(DS_DEP)
LIB_LOADER = $(W32_LIB) $(DS_LIB)

ALL_PRG = $(PRG)
ifeq ($(CSS_USE),yes)
ALL_PRG += $(PRG_FIBMAP)
endif

.SUFFIXES: .c .o

# .PHONY: all clean

all:	$(ALL_PRG)

# $(PRG_AVIP)

.c.o:
	$(CC) -c $(CFLAGS) -o $@ $<

COMMONLIBS = libvo/libvo.a libao2/libao2.a libac3/libac3.a mp3lib/libMP3.a libmpeg2/libmpeg2.a opendivx/libdecore.a encore/libencore.a

loader/libloader.a:
	$(MAKE) -C loader

loader/DirectShow/libDS_Filter.a:
	$(MAKE) -C loader/DirectShow

libavcodec/libavcodec.a:
	$(MAKE) -C libavcodec

libmpeg2/libmpeg2.a:
	$(MAKE) -C libmpeg2

libvo/libvo.a:
	$(MAKE) -C libvo

libao2/libao2.a:
	$(MAKE) -C libao2

libac3/libac3.a:
	$(MAKE) -C libac3

mp3lib/libMP3.a:
	$(MAKE) -C mp3lib

opendivx/libdecore.a:
	$(MAKE) -C opendivx

encore/libencore.a:
	$(MAKE) -C encore

Gui/libgui.a:
	$(MAKE) -C Gui

MPLAYER_DEP = mplayer.o $(OBJS) $(LOADER_DEP) $(AV_DEP) $(COMMONLIBS) 
ifeq ($(GUI),yes)
MPLAYER_DEP += Gui/libgui.a
endif
mplayerwithoutlink: $(MPLAYER_DEP)	
	@for a in $(PARTS); do $(MAKE) -C $$a all ; done

$(PRG):	$(MPLAYER_DEP)
	$(CC) $(CFLAGS) -o $(PRG) mplayer.o $(OBJS) $(XMM_LIBS) $(LIRC_LIBS) $(A_LIBS) -lm $(TERMCAP_LIB) $(LIB_LOADER) $(AV_LIB) -Llibmpeg2 -lmpeg2 -Llibao2 -lao2 $(VO_LIBS) $(CSS_LIB) -Lencore -lencore $(DECORE_LIBS) $(GUI_LIBS) $(ARCH_LIBS)

$(PRG_FIBMAP): fibmap_mplayer.o
	$(CC) -o $(PRG_FIBMAP) fibmap_mplayer.o

# $(PRG_HQ):	depfile mplayerHQ.o $(OBJS) loader/libloader.a libmpeg2/libmpeg2.a opendivx/libdecore.a $(COMMONLIBS) encore/libencore.a
# 	$(CC) $(CFLAGS) -o $(PRG_HQ) mplayerHQ.o $(OBJS) $(XMM_LIBS) $(LIRC_LIBS) $(A_LIBS) -lm $(TERMCAP_LIB) -Lloader -lloader -ldl -Llibmpeg2 -lmpeg2 -Lopendivx -ldecore $(VO_LIBS) -Lencore -lencore -lpthread

# $(PRG_AVIP):	depfile aviparse.o $(OBJS) loader/libloader.a $(COMMONLIBS)
# 	$(CC) $(CFLAGS) -o $(PRG_AVIP) aviparse.o $(OBJS) $(A_LIBS) -lm $(TERMCAP_LIB) -Lloader -lloader -ldl $(VO_LIBS) -lpthread

# $(PRG_TV):	depfile tvision.o $(OBJS) $(COMMONLIBS)
# 	$(CC) $(CFLAGS) -o $(PRG_TV) tvision.o $(OBJS) -lm $(TERMCAP_LIB) $(VO_LIBS)

# Every mplayer dependancy depends on version.h, to force building version.h
# first (in serial mode) before any other of the dependancies for a parallel make
# run.  This is necessary, because the make rule for version.h removes objects
# in a recursive "make distclean" and we must wait for this "make distclean" to
# finish before be can start builing new object files.
$(MPLAYER_DEP): version.h

$(PRG_CFG): version.h codec-cfg.c codec-cfg.h
	$(CC) $(CFLAGS) -g codec-cfg.c -o $(PRG_CFG) -DCODECS2HTML

install: $(ALL_PRG)
	if test ! -d $(BINDIR) ; then mkdir -p $(BINDIR) ; fi
	install -m 755 -s $(PRG) $(BINDIR)/$(PRG)
ifeq ($(GUI),yes)
	-ln -sf $(BINDIR)/$(PRG) $(BINDIR)/gmplayer
endif
	if test ! -d $(prefix)/man/man1 ; then mkdir -p $(prefix)/man/man1; fi
	install -c -m 644 DOCS/mplayer.1 $(prefix)/man/man1/mplayer.1
ifeq ($(CSS_USE),yes)
	@echo "Following task requires root privs. If it fails don't panic"
	@echo "however it means you can't use fibmap_mplayer."
	@echo "Without this (or without running mplayer as root) you won't be"
	@echo "able to play encrypted DVDs."
	-install -o 0 -g 0 -m 4755 -s $(PRG_FIBMAP) $(BINDIR)/$(PRG_FIBMAP)
endif

clean:
	rm -f *.o *~ $(OBJS)

distclean:
	rm -f *~ $(PRG) $(PRG_FIBMAP) $(PRG_HQ) $(PRG_AVIP) $(PRG_TV) $(OBJS) *.o *.a .depend
	@for a in $(PARTS); do $(MAKE) -C $$a distclean; done

dep:	depend

depend:
	./version.sh
	$(CC) -MM $(CFLAGS) mplayer.c $(SRCS) 1>.depend
	@for a in $(PARTS); do $(MAKE) -C $$a dep; done

# ./configure must be run if it changed in CVS
config.h: configure
	@echo "############################################################"
	@echo "####### Please run ./configure again - it's changed! #######"
	@echo "############################################################"
	@exit 1

# rebuild at every config.h/config.mak change:
version.h: config.h config.mak Makefile
	./version.sh
	$(MAKE) distclean
	$(MAKE) depend

# rebuild at every CVS update:
ifneq ($(wildcard CVS/Entries),)
version.h: CVS/Entries
endif

#
# include dependency files if they exist
#
ifneq ($(wildcard .depend),)
include .depend
endif