annotate vidix/drivers/unichrome_vid.c @ 15533:ddf15d233d58

Do not switch to audio tracks whose codec private data differs from the main audio track's as this will most likely result in messed up audio output. Patch by Michael Behrisch <list () behrisch ! de>

/*
    Driver for VIA CLE266 Unichrome - Version 0.1.0

    Copyright (C) 2004 by Timothy Lee

    Based on Cyberblade/i driver by Alastair M. Robison.

    Thanks to Gilles Frattini for bugfixes

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

    Changes:
    2004-03-10
      Initial version
    2004-10-09
      Added Doxygen documentation (Benjamin Zores <[e-mail]>)
    2004-11-08
      Added h/w revision detection (Timothy Lee <[e-mail]>)

    To Do:
*/

#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <inttypes.h>
#include <unistd.h>

#include "../vidix.h"
#include "../fourcc.h"
#include "../../libdha/libdha.h"
#include "../../libdha/pci_ids.h"
#include "../../libdha/pci_names.h"
#include "../../config.h"

#include "unichrome_regs.h"

/**
 * @brief Information on PCI device.
 */
pciinfo_t pci_info;

/**
 * @brief Unichrome driver colorkey settings.
 */
static vidix_grkey_t uc_grkey;

static int frames[VID_PLAY_MAXFRAMES];
uint8_t *vio;
uint8_t *uc_mem;
uint8_t mclk_save[3];
uint8_t hwrev;

#define VIA_OUT(hwregs, reg, val)	*(volatile uint32_t *)((hwregs) + (reg)) = (val)
#define VIA_IN(hwregs, reg)		*(volatile uint32_t *)((hwregs) + (reg))
#define VGA_OUT8(hwregs, reg, val)	*(volatile uint8_t *)((hwregs) + (reg) + 0x8000) = (val)
#define VGA_IN8(hwregs, reg)		*(volatile uint8_t *)((hwregs) + (reg) + 0x8000)
#define VIDEO_OUT(hwregs, reg, val)	VIA_OUT((hwregs)+0x200, reg, val)
#define VIDEO_IN(hwregs, reg)		VIA_IN((hwregs)+0x200, reg)

#define outb(val,reg)	OUTPORT8(reg,val)
#define inb(reg)	INPORT8(reg)

#define ALIGN_TO(v, n) (((v) + (n-1)) & ~(n-1))
#define UC_MAP_V1_FIFO_CONTROL(depth, pre_thr, thr) \
    (((depth)-1) | ((thr) << 8) | ((pre_thr) << 24))

#define FRAMEBUFFER_START	0x600000
#define FRAMEBUFFER_SIZE	0x200000

#ifdef DEBUG_LOGFILE
FILE *logfile = 0;
#define LOGWRITE(x) {if(logfile) fprintf(logfile,x);}
#else
#define LOGWRITE(x)
#endif

/**
 * @brief Unichrome driver vidix capabilities.
 */
static vidix_capability_t uc_cap = {
  "VIA CLE266 Unichrome driver",
  "Timothy Lee <[e-mail]>",
  TYPE_OUTPUT,
  {0, 0, 0, 0},
  4096,
  4096,
  4,
  4,
  -1,
  FLAG_UPSCALER | FLAG_DOWNSCALER,
  VENDOR_VIA2,
  -1,
  {0, 0, 0, 0}
};

/**
 * @brief list of card IDs compliant with the Unichrome driver .
 */
static unsigned short uc_card_ids[] = {
  DEVICE_VIA2_VT8623_CLE266_AGP
};

/**
 * @brief Check age of driver.
 *
 * @return vidix version number.
 */
unsigned int
vixGetVersion (void)
{
  return (VIDIX_VERSION);
}

/**
 * @brief Find chip index in Unichrome compliant devices list.
 *
 * @param chip_id PCI device ID.
 *
 * @returns index position in uc_card_ids if successful.
 *          -1 if chip_id is not a compliant chipset ID.
 */
static int
find_chip (unsigned chip_id)
{
  unsigned i;
  for (i = 0; i < sizeof (uc_card_ids) / sizeof (unsigned short); i++)
    {
      if (chip_id == uc_card_ids[i])
	return i;
    }
  return -1;
}

/**
 * @brief Map hardware settings for vertical scaling.
 *
 * @param sh source height.
 * @param dh destination height.
 * @param zoom will hold vertical setting of zoom register.
 * @param mini will hold vertical setting of mini register.
 *
 * @returns 1 if successful.
 *          0 if the zooming factor is too large or small.
 *
 * @note Derived from VIA's V4L driver.
 *       See ddover.c, DDOVER_HQVCalcZoomHeight()
 */
int
uc_ovl_map_vzoom (int sh, int dh, uint32_t * zoom, uint32_t * mini)
{
  uint32_t sh1, tmp, d;
  int zoom_ok = 1;

  if (sh == dh) /* No zoom */
    {
      /* Do nothing */
    }
  else if (sh < dh) /* Zoom in */
    {
      tmp = (sh * 0x0400) / dh;
      zoom_ok = !(tmp > 0x3ff);

      *zoom |= (tmp & 0x3ff) | V1_Y_ZOOM_ENABLE;
      *mini |= V1_Y_INTERPOLY | V1_YCBCR_INTERPOLY;
    }
  else /* sw > dh - Zoom out */
    {
      /* Find a suitable divider (1 << d) = {2, 4, 8 or 16} */
      sh1 = sh;
      for (d = 1; d < 5; d++)
	{
	  sh1 >>= 1;
	  if (sh1 <= dh)
	    break;
	}
      if (d == 5) /* too small */
	{
	  d = 4;
	  zoom_ok = 0;
	}

      *mini |= ((d << 1) - 1) << 16;	/* <= {1,3,5,7} << 16 */

      /* Add scaling */
      if (sh1 < dh)
	{
	  tmp = (sh1 * 0x400) / dh;
	  *zoom |= ((tmp & 0x3ff) | V1_Y_ZOOM_ENABLE);
	  *mini |= V1_Y_INTERPOLY | V1_YCBCR_INTERPOLY;
	}
    }

  return zoom_ok;
}

/**
 * @brief Map hardware settings for horizontal scaling.
 *
 * @param sw source width.
 * @param dw destination width.
 * @param zoom will hold horizontal setting of zoom register.
 * @param mini will hold horizontal setting of mini register.
 * @param falign will hold fetch aligment.
 * @param dcount will hold display count.
 *
 * @returns 1 if successful.
 *          0 if the zooming factor is too large or small.
 *
 * @note Derived from VIA's V4L driver.
 *       See ddover.c, DDOVER_HQVCalcZoomWidth() and DDOver_GetDisplayCount()
 */
int
uc_ovl_map_hzoom (int sw, int dw, uint32_t * zoom, uint32_t * mini,
		  int *falign, int *dcount)
{
  uint32_t tmp, sw1, d;
  int md; /* Minify-divider */
  int zoom_ok = 1;

  md = 1;
  *falign = 0;

  if (sw == dw) /* no zoom */
    {
      /* Do nothing */
    }
  else if (sw < dw) /* zoom in */
    {
      tmp = (sw * 0x0800) / dw;
      zoom_ok = !(tmp > 0x7ff);

      *zoom |= ((tmp & 0x7ff) << 16) | V1_X_ZOOM_ENABLE;
      *mini |= V1_X_INTERPOLY;
    }
  else /* sw > dw - Zoom out */
    {		
      /* Find a suitable divider (1 << d) = {2, 4, 8 or 16} */
      sw1 = sw;
      for (d = 1; d < 5; d++)
	{
	  sw1 >>= 1;
	  if (sw1 <= dw)
	    break;
	}
      if (d == 5) /* too small */
	{
	  d = 4;
	  zoom_ok = 0;
	}

      md = 1 << d; /* <= {2,4,8,16} */
      *falign = ((md << 1) - 1) & 0xf; /* <= {3,7,15,15} */
      *mini |= V1_X_INTERPOLY;
      *mini |= ((d << 1) - 1) << 24; /* <= {1,3,5,7} << 24 */

      /* Add scaling */
      if (sw1 < dw)
	{
	  /* CLE bug */
	  /* tmp = sw1*0x0800 / dw; */
	  tmp = (sw1 - 2) * 0x0800 / dw;
	  *zoom |= ((tmp & 0x7ff) << 16) | V1_X_ZOOM_ENABLE;
	}
    }

  *dcount = sw - md;
  return zoom_ok;
}

/**
 * @brief qword fetch register setting.
 *
 * @param format overlay pixel format.
 * @param sw source width.
 *
 * @return qword fetch register setting
 *
 * @note Derived from VIA's V4L driver. See ddover.c, DDOver_GetFetch()
 * @note Only call after uc_ovl_map_hzoom()
 */
uint32_t
uc_ovl_map_qwfetch (uint32_t format, int sw)
{
  uint32_t fetch = 0;

  switch (format)
    {
    case IMGFMT_YV12:
    case IMGFMT_I420:
      fetch = ALIGN_TO (sw, 32) >> 4;
      break;
    case IMGFMT_UYVY:
    case IMGFMT_YVYU:
    case IMGFMT_YUY2:
      fetch = (ALIGN_TO (sw << 1, 16) >> 4) + 1;
      break;
    case IMGFMT_BGR15:
    case IMGFMT_BGR16:
      fetch = (ALIGN_TO (sw << 1, 16) >> 4) + 1;
      break;
    case IMGFMT_BGR32:
      fetch = (ALIGN_TO (sw << 2, 16) >> 4) + 1;
      break;
    default:
      printf ("[unichrome] Unexpected pixelformat!");
      break;
    }

  if (fetch < 4)
    fetch = 4;

  return fetch;
}

/**
 * @brief Map pixel format.
 *
 * @param format pixel format.
 *
 * @return the mapped pixel format.
 *
 * @note Derived from VIA's V4L driver. See ddover.c, DDOver_GetV1Format()
 */
uint32_t
uc_ovl_map_format (uint32_t format)
{
  switch (format)
    {
    case IMGFMT_UYVY:
    case IMGFMT_YVYU:
    case IMGFMT_YUY2:
      return V1_COLORSPACE_SIGN | V1_YUV422;
    case IMGFMT_IYUV:
      return V1_COLORSPACE_SIGN | V1_YCbCr420 | V1_SWAP_SW;
    case IMGFMT_YV12:
    case IMGFMT_I420:
      return V1_COLORSPACE_SIGN | V1_YCbCr420;
    case IMGFMT_BGR15:
      return V1_RGB15;
    case IMGFMT_BGR16:
      return V1_RGB16;
    case IMGFMT_BGR32:
      return V1_RGB32;
    default:
      printf ("[unichrome] Unexpected pixelformat!");
      return V1_YUV422;
    }
}

/**
 * @brief Calculate V1 control and fifo-control register values.
 *
 * @param format pixel format.
 * @param sw source width.
 * @param hwrev CLE266 hardware revision.
 * @param extfifo_on set this 1 if the extended FIFO is enabled.
 * @param control will hold value for V1_CONTROL.
 * @param fifo will hold value for V1_FIFO_CONTROL.
 */
void
uc_ovl_map_v1_control (uint32_t format, int sw,
		       int hwrev, int extfifo_on,
		       uint32_t * control, uint32_t * fifo)
{
  *control = V1_BOB_ENABLE | uc_ovl_map_format (format);

  if (hwrev == 0x10)
    {
      *control |= V1_EXPIRE_NUM_F;
    }
  else
    {
      if (extfifo_on)
	{
	  *control |= V1_EXPIRE_NUM_A | V1_FIFO_EXTENDED;
	}
      else
	{
	  *control |= V1_EXPIRE_NUM;
	}
    }

  if ((format == IMGFMT_YV12) || (format == IMGFMT_I420))
    {
      /* Minified video will be skewed without this workaround. */
      if (sw <= 80) /* Fetch count <= 5 */
	{			
	  *fifo = UC_MAP_V1_FIFO_CONTROL (16, 0, 0);
	}
      else
	{
	  if (hwrev == 0x10)
	    *fifo = UC_MAP_V1_FIFO_CONTROL (64, 56, 56);
	  else
	    *fifo = UC_MAP_V1_FIFO_CONTROL (16, 12, 8);
	}
    }
  else
    {
      if (hwrev == 0x10)
	{
	  *fifo = UC_MAP_V1_FIFO_CONTROL (64, 56, 56); /* Default rev 0x10 */
	}
      else
	{
	  if (extfifo_on)
	    *fifo = UC_MAP_V1_FIFO_CONTROL (48, 40, 40);
	  else
	    *fifo = UC_MAP_V1_FIFO_CONTROL (32, 29, 16); /* Default */
	}
    }
}

/**
 * @brief Setup extended FIFO.
 *
 * @param extfifo_on pointer determining if extended fifo is enable or not.
 * @param dst_w destination width.
 */
void
uc_ovl_setup_fifo (int *extfifo_on, int dst_w)
{
  if (dst_w <= 1024) /* Disable extended FIFO */
    {
      outb (0x16, 0x3c4);
      outb (mclk_save[0], 0x3c5);
      outb (0x17, 0x3c4);
      outb (mclk_save[1], 0x3c5);
      outb (0x18, 0x3c4);
      outb (mclk_save[2], 0x3c5);
      *extfifo_on = 0;
    }
  else /* Enable extended FIFO */
    {
      outb (0x17, 0x3c4);
      outb (0x2f, 0x3c5);
      outb (0x16, 0x3c4);
      outb ((mclk_save[0] & 0xf0) | 0x14, 0x3c5);
      outb (0x18, 0x3c4);
      outb (0x56, 0x3c5);
      *extfifo_on = 1;
    }
}

void
uc_ovl_vcmd_wait (volatile uint8_t * vio)
{
  while ((VIDEO_IN (vio, V_COMPOSE_MODE)
	  & (V1_COMMAND_FIRE | V3_COMMAND_FIRE)));
}

/**
 * @brief Probe hardware to find some useable chipset.
 *
 * @param verbose specifies verbose level.
 * @param force specifies force mode : driver should ignore
 *              device_id (danger but useful for new devices)
 *
 * @returns 0 if it can handle something in PC.
 *          a negative error code otherwise.
 */
int
vixProbe (int verbose, int force)
{
  pciinfo_t lst[MAX_PCI_DEVICES];
  unsigned i, num_pci;
  int err;
  err = pci_scan (lst, &num_pci);
  if (err)
    {
      printf ("[unichrome] Error occurred during pci scan: %s\n", 
	      strerror (err));
      return err;
    }
  else
    {
      err = ENXIO;
      for (i = 0; i < num_pci; i++)
	{
	  if (lst[i].vendor == VENDOR_VIA2)
	    {
	      int idx;
	      const char *dname;
	      idx = find_chip (lst[i].device);
	      if (idx == -1)
		continue;
	      dname = pci_device_name (VENDOR_VIA2, lst[i].device);
	      dname = dname ? dname : "Unknown chip";
	      printf ("[unichrome] Found chip: %s\n", dname);
	      if ((lst[i].command & PCI_COMMAND_IO) == 0)
		{
		  printf ("[unichrome] Device is disabled, ignoring\n");
		  continue;
		}
	      uc_cap.device_id = lst[i].device;
	      err = 0;
	      memcpy (&pci_info, &lst[i], sizeof (pciinfo_t));
	      break;
	    }
	}
    }

  if (err && verbose)
    printf ("[unichrome] Can't find chip\n");
  return err;
}

/**
 * @brief Initializes driver.
 *
 * @returns 0 if ok.
 *          a negative error code otherwise.
 */
int
vixInit (void)
{
  long tmp;
  uc_mem = map_phys_mem (pci_info.base0, 0x800000);
  enable_app_io ();

  outb (0x2f, 0x3c4);
  tmp = inb (0x3c5) << 0x18;
  vio = map_phys_mem (tmp, 0x1000);

  outb (0x16, 0x3c4);
  mclk_save[0] = inb (0x3c5);
  outb (0x17, 0x3c4);
  mclk_save[1] = inb (0x3c5);
  outb (0x18, 0x3c4);
  mclk_save[2] = inb (0x3c5);

  uc_grkey.ckey.blue = 0x00;
  uc_grkey.ckey.green = 0x00;
  uc_grkey.ckey.red = 0x00;

  /* Detect whether we have a CLE266Ax or CLE266Cx */
  outb (0x4f, 0x3d4);
  tmp = inb (0x3d5);
  outb (0x4f, 0x3d4);
  outb (0x55, 0x3d5);
  outb (0x4f, 0x3d4);
  if (0x55 == inb (0x3d5))
  {
    /* Only CLE266Cx supports CR4F */
    hwrev = 0x11;
  }
  else
  {
    /* Otherwise assume to be a CLE266Ax */
    hwrev = 0x00;
  }
  outb (0x4f, 0x3d4);
  outb (tmp, 0x3d5);

#ifdef DEBUG_LOGFILE
  logfile = fopen ("/tmp/uc_vidix.log", "w");
#endif
  return 0;
}

/**
 * @brief Destroys driver.
 */
void
vixDestroy (void)
{
#ifdef DEBUG_LOGFILE
  if (logfile)
    fclose (logfile);
#endif
  outb (0x16, 0x3c4);
  outb (mclk_save[0], 0x3c5);
  outb (0x17, 0x3c4);
  outb (mclk_save[1], 0x3c5);
  outb (0x18, 0x3c4);
  outb (mclk_save[2], 0x3c5);

  disable_app_io ();
  unmap_phys_mem (uc_mem, 0x800000);
  unmap_phys_mem (vio, 0x1000);
}

/**
 * @brief Get chipset's hardware capabilities.
 *
 * @param to Pointer to the vidix_capability_t structure to be filled.
 *
 * @returns 0.
 */
int
vixGetCapability (vidix_capability_t * to)
{
  memcpy (to, &uc_cap, sizeof (vidix_capability_t));
  return 0;
}

/**
 * @brief Report if the video FourCC is supported by hardware.
 *
 * @param fourcc input image format.
 *
 * @returns 1 if the fourcc is supported.
 *          0 otherwise.
 */
static int
is_supported_fourcc (uint32_t fourcc)
{
  switch (fourcc)
    {
    case IMGFMT_YV12:
    case IMGFMT_I420:
    case IMGFMT_UYVY:
    case IMGFMT_YVYU:
    case IMGFMT_YUY2:
    case IMGFMT_BGR15:
    case IMGFMT_BGR16:
    case IMGFMT_BGR32:
      return 1;
    default:
      return 0;
    }
}

/**
 * @brief Try to configure video memory for given fourcc.
 *
 * @param to Pointer to the vidix_fourcc_t structure to be filled.
 *
 * @returns 0 if ok.
 *          errno otherwise.
 */
int
vixQueryFourcc (vidix_fourcc_t * to)
{
  if (is_supported_fourcc (to->fourcc))
    {
      to->depth = VID_DEPTH_1BPP | VID_DEPTH_2BPP |
	VID_DEPTH_4BPP | VID_DEPTH_8BPP |
	VID_DEPTH_12BPP | VID_DEPTH_15BPP |
	VID_DEPTH_16BPP | VID_DEPTH_24BPP | VID_DEPTH_32BPP;
      to->flags = VID_CAP_EXPAND | VID_CAP_SHRINK | VID_CAP_COLORKEY;
      return 0;
    }
  else
    to->depth = to->flags = 0;
  return ENOSYS;
}

/**
 * @brief Get the GrKeys
 *
 * @param grkey Pointer to the vidix_grkey_t structure to be filled by driver.
 *
 * @return 0.
 */
int
vixGetGrKeys (vidix_grkey_t * grkey)
{
  memcpy (grkey, &uc_grkey, sizeof (vidix_grkey_t));
  return (0);
}

/**
 * @brief Set the GrKeys
 *
 * @param grkey Colorkey to be set.
 *
 * @return 0.
 */
int
vixSetGrKeys (const vidix_grkey_t * grkey)
{
  unsigned long dwCompose = VIDEO_IN (vio, V_COMPOSE_MODE) & ~0x0f;
  memcpy (&uc_grkey, grkey, sizeof (vidix_grkey_t));
  if (uc_grkey.ckey.op != CKEY_FALSE)
    {
      /* Set colorkey (how do I detect BPP in hardware ??) */
      unsigned long ckey;
      if (1) /* Assume 16-bit graphics */
	{
	  ckey = (grkey->ckey.blue & 0x1f)
	    | ((grkey->ckey.green & 0x3f) << 5)
	    | ((grkey->ckey.red & 0x1f) << 11);
	}
      else
	{
	  ckey = (grkey->ckey.blue)
	    | (grkey->ckey.green << 8) | (grkey->ckey.red << 16);
	}
      VIDEO_OUT (vio, V_COLOR_KEY, ckey);
      dwCompose |= SELECT_VIDEO_IF_COLOR_KEY;
    }

  /* Execute the changes */
  VIDEO_OUT (vio, V_COMPOSE_MODE, dwCompose | V1_COMMAND_FIRE);
  return (0);
}

/**
 * @brief Unichrome driver equalizer capabilities.
 */
vidix_video_eq_t equal = {
  VEQ_CAP_BRIGHTNESS | VEQ_CAP_SATURATION | VEQ_CAP_HUE,
  300, 100, 0, 0, 0, 0, 0, 0
};


/**
 * @brief Get the equalizer capabilities.
 *
 * @param eq Pointer to the vidix_video_eq_t structure to be filled by driver.
 *
 * @return 0.
 */
int
vixPlaybackGetEq (vidix_video_eq_t * eq)
{
  memcpy (eq, &equal, sizeof (vidix_video_eq_t));
  return 0;
}

/**
 * @brief Set the equalizer capabilities for color correction
 *
 * @param eq equalizer capabilities to be set.
 *
 * @return 0.
 */
int
vixPlaybackSetEq (const vidix_video_eq_t * eq)
{
  return 0;
}

/**
 * @brief Y, U, V offsets.
 */
static int YOffs, UOffs, VOffs;

/**
 * @brief Configure driver for playback. Driver should prepare BES.
 *
 * @param info configuration description for playback.
 *
 * @returns  0 in case of success.
 *          -1 otherwise.
 */
int
vixConfigPlayback (vidix_playback_t * info)
{
  int src_w, drw_w;
  int src_h, drw_h;
  long base0, pitch;
  int uv_size, swap_uv;
  unsigned int i;
  int extfifo_on;

  /* Overlay register settings */
  uint32_t win_start, win_end;
  uint32_t zoom, mini;
  uint32_t dcount, falign, qwfetch;
  uint32_t y_start, u_start, v_start;
  uint32_t v_ctrl, fifo_ctrl;

  if (!is_supported_fourcc (info->fourcc))
    return -1;

  src_w = info->src.w;
  src_h = info->src.h;

  drw_w = info->dest.w;
  drw_h = info->dest.h;

  /* Setup FIFO */
  uc_ovl_setup_fifo (&extfifo_on, src_w);

  /* Get image format, FIFO size, etc. */
  uc_ovl_map_v1_control (info->fourcc, src_w, hwrev, extfifo_on,
			 &v_ctrl, &fifo_ctrl);

  /* Setup layer window */
  win_start = (info->dest.x << 16) | info->dest.y;
  win_end = ((info->dest.x + drw_w - 1) << 16) | (info->dest.y + drw_h - 1);

  /* Get scaling and data-fetch parameters */
  zoom = 0;
  mini = 0;
  uc_ovl_map_vzoom (src_h, drw_h, &zoom, &mini);
  uc_ovl_map_hzoom (src_w, drw_w, &zoom, &mini, &falign, &dcount);
  qwfetch = uc_ovl_map_qwfetch (info->fourcc, src_w);

  /* Calculate buffer sizes */
  swap_uv = 0;
  switch (info->fourcc)
    {
    case IMGFMT_YV12:
      swap_uv = 1;
    case IMGFMT_I420:
    case IMGFMT_UYVY:
    case IMGFMT_YVYU:
      pitch = ALIGN_TO (src_w, 32);
      uv_size = (pitch >> 1) * (src_h >> 1);
      break;

    case IMGFMT_YUY2:
    case IMGFMT_BGR15:
    case IMGFMT_BGR16:
      pitch = ALIGN_TO (src_w << 1, 32);
      uv_size = 0;
      break;

    case IMGFMT_BGR32:
      pitch = ALIGN_TO (src_w << 2, 32);
      uv_size = 0;
      break;
    }
  if ((src_w > 4096) || (src_h > 4096) ||
      (src_w < 32) || (src_h < 1) || (pitch > 0x1fff))
    {
      printf ("[unichrome] Layer size out of bounds\n");
    }

  /* Calculate offsets */
  info->offset.y = 0;
  info->offset.v = info->offset.y + pitch * src_h;
  info->offset.u = info->offset.v + uv_size;
  info->frame_size = info->offset.u + uv_size;
  YOffs = info->offset.y;
  UOffs = (swap_uv ? info->offset.v : info->offset.u);
  VOffs = (swap_uv ? info->offset.u : info->offset.v);

  /* Assume we have 2 MB to play with */
  info->num_frames = FRAMEBUFFER_SIZE / info->frame_size;
  if (info->num_frames > VID_PLAY_MAXFRAMES)
    info->num_frames = VID_PLAY_MAXFRAMES;

  /* Start at 6 MB. Let's hope it's not in use. */
  base0 = FRAMEBUFFER_START;
  info->dga_addr = uc_mem + base0;

  info->dest.pitch.y = 32;
  info->dest.pitch.u = 32;
  info->dest.pitch.v = 32;

  for (i = 0; i < info->num_frames; i++)
    {
      info->offsets[i] = info->frame_size * i;
      frames[i] = base0 + info->offsets[i];
    }

  /* Write to the hardware */
  uc_ovl_vcmd_wait (vio);

  /* Configure diy_pitchlay parameters now */
  if (v_ctrl & V1_COLORSPACE_SIGN)
    {
      if (hwrev >= 0x10)
	{
	  VIDEO_OUT (vio, V1_ColorSpaceReg_2, ColorSpaceValue_2_3123C0);
	  VIDEO_OUT (vio, V1_ColorSpaceReg_1, ColorSpaceValue_1_3123C0);
	}
      else
	{
      VIDEO_OUT (vio, V1_ColorSpaceReg_2, ColorSpaceValue_2);
      VIDEO_OUT (vio, V1_ColorSpaceReg_1, ColorSpaceValue_1);
    }
    }

  VIDEO_OUT (vio, V1_CONTROL, v_ctrl);
  VIDEO_OUT (vio, V_FIFO_CONTROL, fifo_ctrl);

  VIDEO_OUT (vio, V1_WIN_START_Y, win_start);
  VIDEO_OUT (vio, V1_WIN_END_Y, win_end);

  VIDEO_OUT (vio, V1_SOURCE_HEIGHT, (src_h << 16) | dcount);

  VIDEO_OUT (vio, V12_QWORD_PER_LINE, qwfetch << 20);
  VIDEO_OUT (vio, V1_STRIDE, pitch | ((pitch >> 1) << 16));

  VIDEO_OUT (vio, V1_MINI_CONTROL, mini);
  VIDEO_OUT (vio, V1_ZOOM_CONTROL, zoom);

  /* Configure buffer address and execute the changes now! */
  vixPlaybackFrameSelect (0);

  return 0;
}

/**
 * @brief Set playback on : driver should activate BES on this call.
 *
 * @return 0.
 */
int
vixPlaybackOn (void)
{
  LOGWRITE ("Enable overlay\n");

  /* Turn on overlay */
  VIDEO_OUT (vio, V1_CONTROL, VIDEO_IN (vio, V1_CONTROL) | V1_ENABLE);

  /* Execute the changes */
  VIDEO_OUT (vio, V_COMPOSE_MODE,
	     VIDEO_IN (vio, V_COMPOSE_MODE) | V1_COMMAND_FIRE);

  return 0;
}

/**
 * @brief Set playback off : driver should deactivate BES on this call.
 *
 * @return 0.
 */
int
vixPlaybackOff (void)
{
  LOGWRITE ("Disable overlay\n");

  uc_ovl_vcmd_wait (vio);

  /* Restore FIFO */
  VIDEO_OUT (vio, V_FIFO_CONTROL, UC_MAP_V1_FIFO_CONTROL (16, 12, 8));

  /* Turn off overlay */
  VIDEO_OUT (vio, V1_CONTROL, VIDEO_IN (vio, V1_CONTROL) & ~V1_ENABLE);

  /* Execute the changes */
  VIDEO_OUT (vio, V_COMPOSE_MODE,
	     VIDEO_IN (vio, V_COMPOSE_MODE) | V1_COMMAND_FIRE);

  return 0;
}

/**
 * @brief Driver should prepare and activate corresponded frame.
 *
 * @param frame the frame index.
 *
 * @return 0.
 *
 * @note This function is used only for double and triple buffering
 *       and never used for single buffering playback.
 */
int
vixPlaybackFrameSelect (unsigned int frame)
{
  LOGWRITE ("Frame select\n");

  uc_ovl_vcmd_wait (vio);

  /* Configure buffer address */
  VIDEO_OUT (vio, V1_STARTADDR_Y0, frames[frame] + YOffs);
  VIDEO_OUT (vio, V1_STARTADDR_CB0, frames[frame] + UOffs);
  VIDEO_OUT (vio, V1_STARTADDR_CR0, frames[frame] + VOffs);

  /* Execute the changes */
  VIDEO_OUT (vio, V_COMPOSE_MODE,
	     VIDEO_IN (vio, V_COMPOSE_MODE) | V1_COMMAND_FIRE);

  return 0;
}