annotate cfg-mplayer.h @ 7256:ec6dd0a29d93

Add the code that chooses a good X11 truecolor visual to the vo_x11 config() function. This is useful for framebuffers on Sun hardware, where we have multiple truecolor visuals of different depths available, and the root window typically runs at depth 8, yet there are 24 bit true color visuals available as well.

/*
 * config for cfgparser
 */

#include "cfg-common.h"

extern int use_stdin;

#if defined(HAVE_FBDEV)||defined(HAVE_VESA)
extern char *monitor_hfreq_str;
extern char *monitor_vfreq_str;
extern char *monitor_dotclock_str;
#endif

#ifdef HAVE_FBDEV
extern char *fb_dev_name;
extern char *fb_mode_cfgfile;
extern char *fb_mode_name;
#else
#ifdef HAVE_DIRECTFB
extern char *fb_dev_name;
#endif
#endif
#ifdef HAVE_PNG
extern int z_compression;
#endif
#ifdef HAVE_JPEG
extern int jpeg_baseline;
extern int jpeg_progressive_mode;
extern int jpeg_optimize;
extern int jpeg_smooth;
extern int jpeg_quality;
extern char * jpeg_outdir;
#endif
#ifdef HAVE_SDL
//extern char *sdl_driver;
extern int sdl_noxv;
extern int sdl_forcexv;
//extern char *sdl_adriver;
#endif
#ifdef USE_FAKE_MONO
extern int fakemono; // defined in dec_audio.c
#endif

#ifdef HAVE_LIRC
extern char *lirc_configfile;
#endif

extern int vo_doublebuffering;
extern int vo_vsync;
extern int vo_fsmode;
extern int vo_dbpp;
extern int vo_directrendering;
extern int vd_use_slices;
extern float vo_panscan;
/* only used by startup (setting these values from configfile) */
extern int vo_gamma_brightness;
extern int vo_gamma_saturation;
extern int vo_gamma_contrast;
extern int vo_gamma_hue;

#ifdef USE_OSD
extern int osd_level;
#endif

extern char *ao_outputfilename;
extern int ao_pcm_waveheader;

#ifdef HAVE_X11
extern char *mDisplayName;
extern int WinID;
extern int ice_layer;
extern int stop_xscreensaver;
#endif

#ifdef HAVE_AA
extern int vo_aa_parseoption(struct config * conf, char *opt, char * param);
extern void vo_aa_revertoption(config_t* opt,char* param);
#endif

#ifdef HAVE_ZR
extern int vo_zr_parseoption(struct config * conf, char *opt, char * param);
extern void vo_zr_revertoption(config_t* opt,char* pram);
#endif

#ifdef STREAMING_LIVE_DOT_COM
extern int isSDPFile;
#endif

#ifdef HAVE_NEW_GUI
extern char * skinName;
#endif

#ifdef HAVE_ODIVX_POSTPROCESS
extern int use_old_pp;
#endif

#ifdef HAVE_XINERAMA
extern int xinerama_screen;
#endif

#ifdef HAVE_RTC
extern int nortc;
#endif

/* from libvo/aspect.c */
extern float monitor_aspect;

/* from dec_audio, currently used for ac3surround decoder only */
extern int audio_output_channels;

/* Options related to audio out plugins */
struct config ao_plugin_conf[]={
	{"list", &ao_plugin_cfg.plugin_list, CONF_TYPE_STRING, 0, 0, 0, NULL},
	{"delay", &ao_plugin_cfg.pl_delay_len, CONF_TYPE_INT, CONF_MIN, 0, 0, NULL},
	{"format", &ao_plugin_cfg.pl_format_type, CONF_TYPE_INT, CONF_MIN, 0, 0, NULL},
	{"fout", &ao_plugin_cfg.pl_resample_fout, CONF_TYPE_INT, CONF_MIN, 0, 0, NULL},
	{"volume", &ao_plugin_cfg.pl_volume_volume, CONF_TYPE_INT, CONF_RANGE, 0, 255, NULL},
	{"mul", &ao_plugin_cfg.pl_extrastereo_mul, CONF_TYPE_FLOAT, CONF_RANGE, -10.0, 10.0, NULL},
	{"softclip", &ao_plugin_cfg.pl_volume_softclip, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{NULL, NULL, 0, 0, 0, 0, NULL}
};

#ifdef HAVE_JPEG
struct config jpeg_conf[]={
	{"progressiv", &jpeg_progressive_mode, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{"noprogressiv", &jpeg_progressive_mode, CONF_TYPE_FLAG, 0, 1, 0, NULL},
	{"baseline", &jpeg_baseline, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{"nobaseline", &jpeg_baseline, CONF_TYPE_FLAG, 0, 1, 0, NULL},
	{"optimize", &jpeg_optimize, CONF_TYPE_INT, CONF_RANGE, 0, 100, NULL},
	{"smooth", &jpeg_smooth, CONF_TYPE_INT, CONF_RANGE, 0, 100, NULL},
	{"quality", &jpeg_quality, CONF_TYPE_INT, CONF_RANGE, 0, 100, NULL},
	{"outdir", &jpeg_outdir, CONF_TYPE_STRING, 0, 0, 0, NULL},
	{NULL, NULL, 0, 0, 0, 0, NULL}
};
#endif

extern int sws_flags;
extern int readPPOpt(void *conf, char *arg);
extern int readNPPOpt(void *conf, char *arg);
extern void revertPPOpt(void *conf, char* opt);


/*
 * CONF_TYPE_FUNC_FULL :
 * allows own implemtations for passing the params
 * 
 * the function receives parameter name and argument (if it does not start with - )
 * useful with a conf.name like 'aa*' to parse several parameters to a function
 * return 0 =ok, but we didn't need the param (could be the filename)
 * return 1 =ok, we accepted the param
 * negative values: see cfgparser.h, ERR_XXX
 *
 * by Folke
 */

static config_t mplayer_opts[]={
	/* name, pointer, type, flags, min, max */
	{"include", cfg_include, CONF_TYPE_FUNC_PARAM, CONF_NOSAVE, 0, 0, NULL}, /* this don't need anymore to be the first!!! */

//---------------------- libao/libvo options ------------------------
	{"o", "Option -o has been renamed to -vo (video-out), use -vo !\n",
            CONF_TYPE_PRINT, CONF_NOCFG, 0, 0, NULL},
	{"vo", &video_driver, CONF_TYPE_STRING, 0, 0, 0, NULL},
	{"ao", &audio_driver, CONF_TYPE_STRING, 0, 0, 0, NULL},

	{"aop", ao_plugin_conf, CONF_TYPE_SUBCONFIG, 0, 0, 0, NULL},
	{"dsp", "Use -ao oss:dsp_path!\n", CONF_TYPE_PRINT, CONF_NOCFG, 0, 0, NULL},
        {"mixer", &mixer_device, CONF_TYPE_STRING, 0, 0, 0, NULL},
	{"master", "Option -master has been removed, use -aop list=volume instead.\n", CONF_TYPE_PRINT, 0, 0, 0, NULL},
	{"channels", &audio_output_channels, CONF_TYPE_INT, CONF_RANGE, 2, 6, NULL},
	// override audio buffer size (used only by -ao oss, anyway obsolete...)
	{"abs", &ao_data.buffersize, CONF_TYPE_INT, CONF_MIN, 0, 0, NULL},

	// -ao pcm options:
	{"aofile", &ao_outputfilename, CONF_TYPE_STRING, 0, 0, 0, NULL},
	{"waveheader", &ao_pcm_waveheader, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{"nowaveheader", &ao_pcm_waveheader, CONF_TYPE_FLAG, 0, 1, 0, NULL},

	{"alsa", "Option -alsa has been removed, new audio code doesn't need it! Remove it from your config file!\n",
            CONF_TYPE_PRINT, 0, 0, 0, NULL},
	{"noalsa", "Option -noalsa has been removed, new audio code doesn't need it! Remove it from your config file!\n",
            CONF_TYPE_PRINT, 0, 0, 0, NULL},

#ifdef HAVE_X11
	{"display", &mDisplayName, CONF_TYPE_STRING, 0, 0, 0, NULL},
#endif

	// -vo png only:
#ifdef HAVE_PNG
	{"z", &z_compression, CONF_TYPE_INT, CONF_RANGE, 0, 9, NULL},
#endif
	// -vo jpeg only:
#ifdef HAVE_JPEG
	{"jpeg", jpeg_conf, CONF_TYPE_SUBCONFIG, 0,0,0, NULL},
#endif
	// -vo sdl only:
#ifdef HAVE_SDL
	{"sdl", "Use -vo sdl:driver instead of -vo sdl -sdl driver\n",
	    CONF_TYPE_PRINT, 0, 0, 0, NULL},
	{"noxv", &sdl_noxv, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{"forcexv", &sdl_forcexv, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	// -ao sdl only:
	{"sdla", "Use -ao sdl:driver instead of -ao sdl -sdla driver\n",
	    CONF_TYPE_PRINT, 0, 0, 0, NULL},
#endif

#ifdef HAVE_FBDEV
	{"fb", &fb_dev_name, CONF_TYPE_STRING, 0, 0, 0, NULL},
	{"fbmode", &fb_mode_name, CONF_TYPE_STRING, 0, 0, 0, NULL},
	{"fbmodeconfig", &fb_mode_cfgfile, CONF_TYPE_STRING, 0, 0, 0, NULL},
	{"monitor_hfreq", &monitor_hfreq_str, CONF_TYPE_STRING, 0, 0, 0, NULL},
	{"monitor_vfreq", &monitor_vfreq_str, CONF_TYPE_STRING, 0, 0, 0, NULL},
	{"monitor_dotclock", &monitor_dotclock_str, CONF_TYPE_STRING, 0, 0, 0, NULL},
#else
#ifdef HAVE_DIRECTFB
	{"fb", &fb_dev_name, CONF_TYPE_STRING, 0, 0, 0, NULL},
#endif
#endif

	// force window width/height or resolution (with -vm)
	{"x", &opt_screen_size_x, CONF_TYPE_INT, CONF_RANGE, 0, 4096, NULL},
	{"y", &opt_screen_size_y, CONF_TYPE_INT, CONF_RANGE, 0, 4096, NULL},
	// set screen dimensions (when not detectable or virtual!=visible)
	{"screenw", &vo_screenwidth, CONF_TYPE_INT, CONF_RANGE, 0, 4096, NULL},
	{"screenh", &vo_screenheight, CONF_TYPE_INT, CONF_RANGE, 0, 4096, NULL},
	// set aspect ratio of monitor - usefull for 16:9 TVout
	{"monitoraspect", &monitor_aspect, CONF_TYPE_FLOAT, CONF_RANGE, 0.2, 3.0, NULL},
	// video mode switching: (x11,xv,dga)
        {"vm", &vidmode, CONF_TYPE_FLAG, 0, 0, 1, NULL},
        {"novm", &vidmode, CONF_TYPE_FLAG, 0, 1, 0, NULL},
	// start in fullscreen mode:
	{"fs", &fullscreen, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{"nofs", &fullscreen, CONF_TYPE_FLAG, 0, 1, 0, NULL},
	// set fullscreen switch method (workaround for buggy WMs)
	{"fsmode", "option 'fsmode' is obsolete, avoid using it! if you really want it, try -fsmode-dontuse, but don't report bugs with this option used!", CONF_TYPE_PRINT, CONF_RANGE, 0, 31, NULL},
	{"fsmode-dontuse", &vo_fsmode, CONF_TYPE_INT, CONF_RANGE, 0, 31, NULL},
	// set bpp (x11+vm, dga, fbdev, vesa, svga?)
        {"bpp", &vo_dbpp, CONF_TYPE_INT, CONF_RANGE, 0, 32, NULL},
	// double buffering:  (mga/xmga, xv, vidix, vesa, fbdev)
	{"double", &vo_doublebuffering, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{"nodouble", &vo_doublebuffering, CONF_TYPE_FLAG, 0, 1, 0, NULL},
	// wait for v-sync (vesa)
	{"vsync", &vo_vsync, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{"novsync", &vo_vsync, CONF_TYPE_FLAG, 0, 1, 0, NULL},
	{"panscan", &vo_panscan, CONF_TYPE_FLOAT, CONF_RANGE, 0.0, 1.0, NULL},

#ifdef HAVE_X11
	// x11,xv,xmga,xvidix
	{"wid", &WinID, CONF_TYPE_INT, 0, 0, 0, NULL},
	{"rootwin", &WinID, CONF_TYPE_FLAG, 0, -1, 0, NULL},
	{"icelayer", &ice_layer, CONF_TYPE_INT, CONF_RANGE, 0, 15, NULL},
	{"stop_xscreensaver", &stop_xscreensaver, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{"nostop_xscreensaver", &stop_xscreensaver, CONF_TYPE_FLAG, 0, 1, 0, NULL},
#endif

#ifdef HAVE_XINERAMA
	{"xineramascreen", &xinerama_screen, CONF_TYPE_INT, CONF_RANGE, 0, 32, NULL},
#endif

	{"brightness",&vo_gamma_brightness, CONF_TYPE_INT, CONF_RANGE, -100, 100, NULL},
	{"saturation",&vo_gamma_saturation, CONF_TYPE_INT, CONF_RANGE, -100, 100, NULL},
	{"contrast",&vo_gamma_contrast, CONF_TYPE_INT, CONF_RANGE, -100, 100, NULL},
	{"hue",&vo_gamma_hue, CONF_TYPE_INT, CONF_RANGE, -100, 100, NULL},

	// direct rendering (decoding to video out buffer)
	{"dr", &vo_directrendering, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{"nodr", &vo_directrendering, CONF_TYPE_FLAG, 0, 1, 0, NULL},
	{"vaa_dr", "Use -dr, -vaa_dr was obsoleted\n", CONF_TYPE_PRINT, 0, 0, 0, NULL},
	{"vaa_nodr", "Use -nodr, -vaa_nodr was obsoleted\n", CONF_TYPE_PRINT, 0, 0, 0, NULL},

	// draw by slices or whole frame (usefull with libmpeg2/libavcodec)
	{"slices", &vd_use_slices, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{"noslices", &vd_use_slices, CONF_TYPE_FLAG, 0, 1, 0, NULL},

#ifdef HAVE_AA
	// -vo aa
	{"aa*",	vo_aa_parseoption,  CONF_TYPE_FUNC_FULL, 0, 0, 0 , &vo_aa_revertoption},
#endif

#ifdef HAVE_ZR
	// -vo zr
	{"zr*", vo_zr_parseoption, CONF_TYPE_FUNC_FULL, 0, 0, 0, &vo_zr_revertoption },
#endif

#ifdef STREAMING_LIVE_DOT_COM
	// -sdp option, specifying that the source is a SDP file
        {"sdp", &isSDPFile, CONF_TYPE_FLAG, 0, 0, 1, NULL},
#else
	{"sdp", "MPlayer was compiled WITHOUT the \"LIVE.COM Streaming Media\" libraries!\n", CONF_TYPE_PRINT, CONF_NOCFG, 0, 0, NULL},
#endif

//---------------------- mplayer-only options ------------------------

	{"osdlevel", &osd_level, CONF_TYPE_INT, CONF_RANGE, 0, 2 , NULL},

	// these should be moved to -common, and suppot in mencoder too
	{"vobsub", &vobsub_name, CONF_TYPE_STRING, 0, 0, 0, NULL},
	{"vobsubid", &vobsub_id, CONF_TYPE_INT, CONF_RANGE, 0, 31, NULL},

	{"sstep", &step_sec, CONF_TYPE_INT, CONF_MIN, 0, 0, NULL},

	// set a-v distance, should be moved to -common and support in mencoder
	{"delay", &audio_delay, CONF_TYPE_FLOAT, CONF_RANGE, -100.0, 100.0, NULL},

	{"framedrop", &frame_dropping, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{"hardframedrop", &frame_dropping, CONF_TYPE_FLAG, 0, 0, 2, NULL},
	{"noframedrop", &frame_dropping, CONF_TYPE_FLAG, 0, 1, 0, NULL},

	{"autoq", &auto_quality, CONF_TYPE_INT, CONF_RANGE, 0, 100, NULL},

	{"benchmark", &benchmark, CONF_TYPE_FLAG, 0, 0, 1, NULL},

	// dump some stream out instead of playing the file
	// this really should be in mencoder instead of mplayer... -> TODO
	{"dumpfile", &stream_dump_name, CONF_TYPE_STRING, 0, 0, 0, NULL},
	{"dumpaudio", &stream_dump_type, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{"dumpvideo", &stream_dump_type, CONF_TYPE_FLAG, 0, 0, 2, NULL},
	{"dumpsub", &stream_dump_type, CONF_TYPE_FLAG, 0, 0, 3, NULL},
	{"dumpmpsub", &stream_dump_type, CONF_TYPE_FLAG, 0, 0, 4, NULL},
	{"dumpstream", &stream_dump_type, CONF_TYPE_FLAG, 0, 0, 5, NULL},
	{"dumpsrtsub", &stream_dump_type, CONF_TYPE_FLAG, 0, 0, 6, NULL},

#ifdef HAVE_LIRC
	{"lircconf", &lirc_configfile, CONF_TYPE_STRING, CONF_GLOBAL, 0, 0, NULL}, 
#endif

	{"gui", &use_gui, CONF_TYPE_FLAG, CONF_GLOBAL|CONF_NOCMD, 0, 1, NULL},
//	{"nogui", &use_gui, CONF_TYPE_FLAG, CONF_GLOBAL, 1, 0, NULL},
      
#ifdef HAVE_NEW_GUI
	{"skin", &skinName, CONF_TYPE_STRING, CONF_GLOBAL, 0, 0, NULL},
#endif

	{"noloop", &loop_times, CONF_TYPE_FLAG, 0, 0, -1, NULL},
	{"loop", &loop_times, CONF_TYPE_INT, CONF_RANGE, -1, 10000, NULL},
	{"playlist", NULL, CONF_TYPE_STRING, 0, 0, 0, NULL},

	// a-v sync stuff:
	{"dapsync", &dapsync, CONF_TYPE_FLAG, 0, 0, 1, NULL},
	{"nodapsync", &dapsync, CONF_TYPE_FLAG, 0, 1, 0, NULL},
	{"softsleep", &softsleep, CONF_TYPE_FLAG, 0, 0, 1, NULL},
#ifdef HAVE_RTC
	{"nortc", &nortc, CONF_TYPE_FLAG, 0, 0, 1, NULL},
#endif

	{"slave", &slave_mode, CONF_TYPE_FLAG,CONF_GLOBAL , 0, 1, NULL},
	{"use-stdin", &use_stdin, CONF_TYPE_FLAG, CONF_GLOBAL, 0, 1, NULL},

#define MAIN_CONF
#include "cfg-common.h"
#undef MAIN_CONF
        
	{"quiet", &quiet, CONF_TYPE_FLAG, CONF_GLOBAL, 0, 1, NULL},
	{"noquiet", &quiet, CONF_TYPE_FLAG, CONF_GLOBAL, 1, 0, NULL},
	{"verbose", &verbose, CONF_TYPE_INT, CONF_RANGE|CONF_GLOBAL, 0, 100, NULL},
	{"v", cfg_inc_verbose, CONF_TYPE_FUNC, CONF_GLOBAL|CONF_NOSAVE, 0, 0, NULL},
	{"-help", help_text, CONF_TYPE_PRINT, CONF_NOCFG|CONF_GLOBAL, 0, 0, NULL},
	{"help", help_text, CONF_TYPE_PRINT, CONF_NOCFG|CONF_GLOBAL, 0, 0, NULL},
	{"h", help_text, CONF_TYPE_PRINT, CONF_NOCFG|CONF_GLOBAL, 0, 0, NULL},
	{NULL, NULL, 0, 0, 0, 0, NULL}
};