diff libao2/ao_nas.c @ 12022:293141b57c01

Use MultiplyElement to control volume. Works with multiple videos at the same time and even when NAS does not control the mixer or it is unavailable. Show buffer underrun hint only once and add missing linebreaks.

--- a/libao2/ao_nas.c	Sat Mar 13 16:48:52 2004 +0000
+++ b/libao2/ao_nas.c	Sat Mar 13 21:54:35 2004 +0000
@@ -109,6 +109,7 @@
 	AuServer	*aud;
 	AuFlowID	flow;
 	AuDeviceID	dev;
+	AuFixedPoint	gain;
 
 	unsigned int state;
 	int expect_underrun;
@@ -266,13 +267,17 @@
 		if (nas_data->expect_underrun) {
 			nas_data->expect_underrun = 0;
 		} else {
+			static int hint = 1;
 			mp_msg(MSGT_AO, MSGL_WARN,
 			       "ao_nas: Buffer underrun.\n");
-			mp_msg(MSGT_AO, MSGL_HINT,
-			       "Possible reasons are:"
-			       "1) Network congestion."
-			       "2) Your NAS server is too slow."
-			       "Try renicing your nasd to e.g. -15.\n");
+			if (hint) {
+				hint = 0;
+				mp_msg(MSGT_AO, MSGL_HINT,
+				       "Possible reasons are:\n"
+				       "1) Network congestion.\n"
+				       "2) Your NAS server is too slow.\n"
+				       "Try renicing your nasd to e.g. -15.\n");
+			}
 		}
 		if (nas_readBuffer(nas_data,
 		                   nas_data->server_buffer_size -
@@ -315,50 +320,34 @@
 		return AuFormatLinearUnsigned16LSB;
 	case	AFMT_U16_BE:
 		return AuFormatLinearUnsigned16MSB;
-#ifndef WORDS_BIGENDIAN
-	default:
-		*format=AFMT_S16_LE;
-#endif
 	case	AFMT_S16_LE:
 		return AuFormatLinearSigned16LSB;
-#ifdef WORDS_BIGENDIAN
-	default:
-		*format=AFMT_S16_BE;
-#endif
 	case	AFMT_S16_BE:
 		return AuFormatLinearSigned16MSB;
 	case	AFMT_MU_LAW:
 		return AuFormatULAW8;
+	default:
+		*format=AFMT_S16_NE;
+		return nas_aformat_to_auformat(format);
 	}
 }
 
 // to set/get/query special features/parameters
 static int control(int cmd, void *arg)
 {
-	AuDeviceAttributes *dattr;
-	AuFixedPoint fpgain;
+	AuElementParameters aep;
 	AuStatus as;
-	int gain;
 	int retval = CONTROL_UNKNOWN;
 
 	ao_control_vol_t *vol = (ao_control_vol_t *)arg;
 
-	dattr = AuGetDeviceAttributes(nas_data->aud, nas_data->dev, &as);
-	if (as != AuSuccess) {
-		nas_print_error(nas_data->aud,
-		                "control(): AuGetDeviceAttributes", as);
-		return CONTROL_ERROR;
-	}
-	gain = AuFixedPointRoundDown(AuDeviceGain(dattr));
-	// kn: 0 <= gain <= 100
-
 	switch (cmd) {
 	case AOCONTROL_GET_VOLUME:
 
-		vol->right = (float) gain;
+		vol->right = (float)nas_data->gain/AU_FIXED_POINT_SCALE*50;
 		vol->left = vol->right;
 
-		mp_msg(MSGT_AO, MSGL_DBG2, "ao_nas: AOCONTROL_GET_VOLUME: %d\n", gain);
+		mp_msg(MSGT_AO, MSGL_DBG2, "ao_nas: AOCONTROL_GET_VOLUME: %08x\n", nas_data->gain);
 		retval = CONTROL_OK;
 		break;
 
@@ -368,22 +357,23 @@
 		 * know if something can change it outside of ao_nas
 		 * so i take the mean of both values.
 		 */
-		gain = (int) ((vol->left+vol->right)/2);
-		mp_msg(MSGT_AO, MSGL_DBG2, "ao_nas: AOCONTROL_SET_VOLUME: %d\n", gain);
+		nas_data->gain = AU_FIXED_POINT_SCALE*((vol->left+vol->right)/2)/50;
+		mp_msg(MSGT_AO, MSGL_DBG2, "ao_nas: AOCONTROL_SET_VOLUME: %08x\n", nas_data->gain);
 
-		fpgain = AuFixedPointFromSum(gain, 0);
-		AuDeviceGain(dattr) = fpgain;
-		AuSetDeviceAttributes(nas_data->aud, nas_data->dev,
-		                      AuCompDeviceGainMask, dattr, &as);
+		aep.parameters[AuParmsMultiplyConstantConstant]=nas_data->gain;
+		aep.flow = nas_data->flow;
+		aep.element_num = 1;
+		aep.num_parameters = AuParmsMultiplyConstant;
+
+		AuSetElementParameters(nas_data->aud, 1, &aep, &as);
 		if (as != AuSuccess) {
 			nas_print_error(nas_data->aud,
-			                "control(): AuSetDeviceAttributes", as);
+			                "control(): AuSetElementParameters", as);
 			retval = CONTROL_ERROR;
 		} else retval = CONTROL_OK;
 		break;
 	};
 
-	AuFreeDeviceAttributes(nas_data->aud, 1, dattr);
 	return retval;
 }
 
@@ -460,9 +450,11 @@
 				buffer_size / bytes_per_sample,
 				(buffer_size - NAS_FRAG_SIZE) /
 				bytes_per_sample, 0, NULL);
-	AuMakeElementExportDevice(elms+1, 0, nas_data->dev, rate,
+	nas_data->gain = AuFixedPointFromFraction(1, 1);
+	AuMakeElementMultiplyConstant(elms+1, 0, nas_data->gain);
+	AuMakeElementExportDevice(elms+2, 1, nas_data->dev, rate,
 				AuUnlimitedSamples, 0, NULL);
-	AuSetElements(nas_data->aud, nas_data->flow, AuTrue, 2, elms, &as);
+	AuSetElements(nas_data->aud, nas_data->flow, AuTrue, sizeof(elms)/sizeof(*elms), elms, &as);
 	if (as != AuSuccess) {
 		nas_print_error(nas_data->aud, "init(): AuSetElements", as);
 		AuCloseServer(nas_data->aud);