Mercurial > mplayer.hg
diff help/help_mp-en.h @ 13122:fcce0023bf55
printf -> mp_msg conversion, first steps
patch by The Wanderer <inverseparadox@comcast.net>
| author | diego |
|---|---|
| date | Tue, 24 Aug 2004 19:36:17 +0000 |
| parents | eb0d3c1b6c6d |
| children | 07067695680a |
line wrap: on
line diff
--- a/help/help_mp-en.h Tue Aug 24 19:29:17 2004 +0000 +++ b/help/help_mp-en.h Tue Aug 24 19:36:17 2004 +0000 @@ -57,7 +57,8 @@ // mplayer.c: -#define MSGTR_Exiting "\nExiting... (%s)\n" +#define MSGTR_Exiting "\nExiting...\n" +#define MSGTR_ExitingHow "\nExiting... (%s)\n" #define MSGTR_Exit_quit "Quit" #define MSGTR_Exit_eof "End of file" #define MSGTR_Exit_error "Fatal error" @@ -182,6 +183,135 @@ #define MSGTR_RecommendedVideoBitrate "Recommended video bitrate for %s CD: %d\n" #define MSGTR_VideoStreamResult "\nVideo stream: %8.3f kbit/s (%d bps) size: %d bytes %5.3f secs %d frames\n" #define MSGTR_AudioStreamResult "\nAudio stream: %8.3f kbit/s (%d bps) size: %d bytes %5.3f secs\n" +#define MSGTR_OpenedStream "success: format: %d data: 0x%X - 0x%x\n" +#define MSGTR_VCodecFramecopy "videocodec: framecopy (%dx%d %dbpp fourcc=%x)\n" +#define MSGTR_ACodecFramecopy "audiocodec: framecopy (format=%x chans=%d rate=%ld bits=%d bps=%ld sample-%ld)\n" +#define MSGTR_CBRPCMAudioSelected "CBR PCM audio selected\n" +#define MSGTR_MP3AudioSelected "MP3 audio selected\n" +#define MSGTR_CannotAllocateBytes "Couldn't allocate %d bytes\n" +#define MSGTR_SettingAudioDelay "Setting AUDIO DELAY to %5.3f\n" +#define MSGTR_SettingAudioInputGain "Setting audio input gain to %f\n" +#define MSGTR_LamePresetEquals "\npreset=%s\n\n" +#define MSGTR_LimitingAudioPreload "Limiting audio preload to 0.4s\n" +#define MSGTR_IncreasingAudioDensity "Increasing audio density to 4\n" +#define MSGTR_ZeroingAudioPreloadAndMaxPtsCorrection "Forcing audio preload to 0, max pts correction to 0\n" +#define MSGTR_CBRAudioByterate "\n\nCBR audio: %ld bytes/sec, %d bytes/block\n" +#define MSGTR_LameVersion "LAME version %s (%s)\n\n" +#define MSGTR_InvalidBitrateForLamePreset "Error: The bitrate specified is out of the valid range for this preset\n"\ +"\n"\ +"When using this mode you must enter a value between \"8\" and \"320\"\n"\ +"\n"\ +"For further information try: \"-lameopts preset=help\"\n" +#define MSGTR_InvalidLamePresetOptions "Error: You did not enter a valid profile and/or options with preset\n"\ +"\n"\ +"Available profiles are:\n"\ +"\n"\ +" <fast> standard\n"\ +" <fast> extreme\n"\ +" insane\n"\ +" <cbr> (ABR Mode) - The ABR Mode is implied. To use it,\n"\ +" simply specify a bitrate. For example:\n"\ +" \"preset=185\" activates this\n"\ +" preset and uses 185 as an average kbps.\n"\ +"\n"\ +" Some examples:\n"\ +"\n"\ +" \"-lameopts fast:preset=standard \"\n"\ +" or \"-lameopts cbr:preset=192 \"\n"\ +" or \"-lameopts preset=172 \"\n"\ +" or \"-lameopts preset=extreme \"\n"\ +"\n"\ +"For further information try: \"-lameopts preset=help\"\n" +#define MSGTR_LamePresetsLongInfo "\n"\ +"The preset switches are designed to provide the highest possible quality.\n"\ +"\n"\ +"They have for the most part been subject to and tuned via rigorous double blind\n"\ +"listening tests to verify and achieve this objective.\n"\ +"\n"\ +"These are continually updated to coincide with the latest developments that\n"\ +"occur and as a result should provide you with nearly the best quality\n"\ +"currently possible from LAME.\n"\ +"\n"\ +"To activate these presets:\n"\ +"\n"\ +" For VBR modes (generally highest quality):\n"\ +"\n"\ +" \"preset=standard\" This preset should generally be transparent\n"\ +" to most people on most music and is already\n"\ +" quite high in quality.\n"\ +"\n"\ +" \"preset=extreme\" If you have extremely good hearing and similar\n"\ +" equipment, this preset will generally provide\n"\ +" slightly higher quality than the \"standard\"\n"\ +" mode.\n"\ +"\n"\ +" For CBR 320kbps (highest quality possible from the preset switches):\n"\ +"\n"\ +" \"preset=insane\" This preset will usually be overkill for most\n"\ +" people and most situations, but if you must\n"\ +" have the absolute highest quality with no\n"\ +" regard to filesize, this is the way to go.\n"\ +"\n"\ +" For ABR modes (high quality per given bitrate but not as high as VBR):\n"\ +"\n"\ +" \"preset=<kbps>\" Using this preset will usually give you good\n"\ +" quality at a specified bitrate. Depending on the\n"\ +" bitrate entered, this preset will determine the\n"\ +" optimal settings for that particular situation.\n"\ +" While this approach works, it is not nearly as\n"\ +" flexible as VBR, and usually will not attain the\n"\ +" same level of quality as VBR at higher bitrates.\n"\ +"\n"\ +"The following options are also available for the corresponding profiles:\n"\ +"\n"\ +" <fast> standard\n"\ +" <fast> extreme\n"\ +" insane\n"\ +" <cbr> (ABR Mode) - The ABR Mode is implied. To use it,\n"\ +" simply specify a bitrate. For example:\n"\ +" \"preset=185\" activates this\n"\ +" preset and uses 185 as an average kbps.\n"\ +"\n"\ +" \"fast\" - Enables the new fast VBR for a particular profile. The\n"\ +" disadvantage to the speed switch is that often times the\n"\ +" bitrate will be slightly higher than with the normal mode\n"\ +" and quality may be slightly lower also.\n"\ +" Warning: with the current version fast presets might result in too\n"\ +" high bitrate compared to regular presets.\n"\ +"\n"\ +" \"cbr\" - If you use the ABR mode (read above) with a significant\n"\ +" bitrate such as 80, 96, 112, 128, 160, 192, 224, 256, 320,\n"\ +" you can use the \"cbr\" option to force CBR mode encoding\n"\ +" instead of the standard abr mode. ABR does provide higher\n"\ +" quality but CBR may be useful in situations such as when\n"\ +" streaming an mp3 over the internet may be important.\n"\ +"\n"\ +" For example:\n"\ +"\n"\ +" \"-lameopts fast:preset=standard \"\n"\ +" or \"-lameopts cbr:preset=192 \"\n"\ +" or \"-lameopts preset=172 \"\n"\ +" or \"-lameopts preset=extreme \"\n"\ +"\n"\ +"\n"\ +"A few aliases are available for ABR mode:\n"\ +"phone => 16kbps/mono phon+/lw/mw-eu/sw => 24kbps/mono\n"\ +"mw-us => 40kbps/mono voice => 56kbps/mono\n"\ +"fm/radio/tape => 112kbps hifi => 160kbps\n"\ +"cd => 192kbps studio => 256kbps" +#define MSGTR_ConfigfileError "configfile error" +#define MSGTR_ErrorParsingCommandLine "error parsing cmdline" +#define MSGTR_VideoStreamRequired "Video stream is mandatory!\n" +#define MSGTR_ForcingInputFPS "input fps will be interpreted as %5.2f instead\n" +#define MSGTR_RawvideoDoesNotSupportAudio "Output file format RAWVIDEO does not support audio - disabling audio\n" +#define MSGTR_DemuxerDoesntSupportNosound "This demuxer doesn't support -nosound yet.\n" +#define MSGTR_MemAllocFailed "memory allocation failed" +#define MSGTR_NoMatchingFilter "Couldn't find matching filter/ao format!\n" +#define MSGTR_MP3WaveFormatSizeNot30 "sizeof(MPEGLAYER3WAVEFORMAT)==%d!=30, maybe broken C compiler?\n" +#define MSGTR_NoLavcAudioCodecName "Audio LAVC, Missing codec name!\n" +#define MSGTR_LavcAudioCodecNotFound "Audio LAVC, couldn't find encoder for codec %s\n" +#define MSGTR_CouldntAllocateLavcContext "Audio LAVC, couldn't allocate context!\n" +#define MSGTR_CouldntOpenCodec "Couldn't open codec %s, br=%d\n" // cfg-mencoder.h: