view mixer.c @ 13000:076e87baf7c0

--Patch by Stefan '1stein' Schuermans <[e-mail]>: on the CCC-Camp ICMP2 (www.icmp2.de) this weekend, some friends and I played around with our Blinkenlights replicas and found a little bug in your MPlayer Blinkenlights outpur driver "vo_bl". The Blinkenlights UDP-Protocol contains the maximum grayscale value "maxval" (e.g. 255 for 8 bit) instead of the number of grayscales (e.g. 256 for 8 bit). Because some programs are very strict concerning this value, we had to patch mpalyer to get it to work. Today, I've added an output scheme "hdl" for the Haus des Lehrers in Berlin, on which an installation with grayscales was done last winter. Additionally, I've also added an output scheme named "grayscale" that adapts the size of the UDP packets to the size used with "-vf scale -zoom" that we will need for a project (a room with over 15000 pixels at the walls and floor) next year.

#include <string.h>
#ifndef __MINGW32__
#include <sys/ioctl.h>
#endif
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>

#include "config.h"
#include "libao2/audio_out.h"
#include "libaf/af.h"
#include "mixer.h"

#include "help_mp.h"

char * mixer_device=NULL;
char * mixer_channel=NULL;

void mixer_getvolume(mixer_t *mixer, float *l, float *r)
{
  ao_control_vol_t vol;
  *l=0; *r=0;
  if(mixer->audio_out){
    if(CONTROL_OK != mixer->audio_out->control(AOCONTROL_GET_VOLUME,&vol)) {
      if (!mixer->afilter)
        return;
      else {
        float db_vals[AF_NCH];
        if (!af_control_any_rev(mixer->afilter,
               AF_CONTROL_VOLUME_LEVEL | AF_CONTROL_GET, db_vals))
          db_vals[0] = db_vals[1] = 1.0;
        else
        af_from_dB (2, db_vals, db_vals, 20.0, -200.0, 60.0);
        vol.left = db_vals[0] * 90.0;
        vol.right = db_vals[1] * 90.0;
      }
    }
    *r=vol.right;
    *l=vol.left;
  }
}

void mixer_setvolume(mixer_t *mixer, float l, float r)
{
  ao_control_vol_t vol;
  vol.right=r; vol.left=l;
  if(mixer->audio_out){
    if(CONTROL_OK != mixer->audio_out->control(AOCONTROL_SET_VOLUME,&vol)) {
      if (!mixer->afilter)
        return;
      else {
        // af_volume uses values in dB
        float db_vals[AF_NCH];
        int i;
        // a volume of 90% will give 0 dB (no change)
        // like this, amplification is possible as well
        db_vals[0] = l / 90.0;
        db_vals[1] = r / 90.0;
        for (i = 2; i < AF_NCH; i++) {
          db_vals[i] = (l + r) / 180.0;
        }
        af_to_dB (AF_NCH, db_vals, db_vals, 20.0);
        if (!af_control_any_rev(mixer->afilter,
               AF_CONTROL_VOLUME_LEVEL | AF_CONTROL_SET, db_vals)) {
          mp_msg(MSGT_GLOBAL, MSGL_INFO, MSGTR_InsertingAfVolume);
          if (af_add(mixer->afilter, "volume")) {
            if (!af_control_any_rev(mixer->afilter,
                   AF_CONTROL_VOLUME_LEVEL | AF_CONTROL_SET, db_vals)) {
              mp_msg(MSGT_GLOBAL, MSGL_ERR, MSGTR_NoVolume);
              return;
            }
          }
	}
      }
    }
  }
 mixer->muted=0;
}

void mixer_incvolume(mixer_t *mixer)
{
 float mixer_l, mixer_r;
 mixer_getvolume(mixer, &mixer_l, &mixer_r);
 mixer_l += mixer->volstep;
 if ( mixer_l > 100 ) mixer_l = 100;
 mixer_r += mixer->volstep;
 if ( mixer_r > 100 ) mixer_r = 100;
 mixer_setvolume(mixer, mixer_l, mixer_r);
}

void mixer_decvolume(mixer_t *mixer)
{
 float mixer_l, mixer_r;
 mixer_getvolume(mixer, &mixer_l, &mixer_r);
 mixer_l -= mixer->volstep;
 if ( mixer_l < 0 ) mixer_l = 0;
 mixer_r -= mixer->volstep;
 if ( mixer_r < 0 ) mixer_r = 0;
 mixer_setvolume(mixer, mixer_l, mixer_r);
}

void mixer_getbothvolume(mixer_t *mixer, float *b)
{
 float mixer_l, mixer_r;
 mixer_getvolume(mixer, &mixer_l, &mixer_r);
 *b = ( mixer_l + mixer_r ) / 2;
}

void mixer_mute(mixer_t *mixer)
{
 if (mixer->muted) mixer_setvolume(mixer, mixer->last_l, mixer->last_r);
  else
   { 
    mixer_getvolume(mixer, &mixer->last_l, &mixer->last_r);
    mixer_setvolume(mixer, 0, 0);
    mixer->muted=1;
   }
}